Digital Peripheral Solutions QCW2MP Wi-Fi HD Camera User Manual

Digital Peripheral Solutions Wi-Fi HD Camera Users Manual

Users Manual

1080p WI-FI CUBE CAMERA MINI QUICK START GUIDESPEAKERLENSRESET BUTTONINDICATOR LIGHTADJUSTABLE BASEMICROPHONEMICRO USB PORTMICRO SD CARD SLOTDISCLAIMER: Although Q-See has made every effort to ensure that the information in this guide was correct at the time of printing, Q-See does not assume any liability to any party for any loss, damage, or disruption caused by any errors, omissions, or typos that may occur. WARRANTY & SUPPORTQ-See is always here to answer your questions and take your valued suggestions. Please visit us at www.q-see.com/support for 24/7 support and access to our Support Portal.Regulatory InformationFCC INFORMATIONThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and(2) This device must accept any interference received, including interference that may cause undesired operation.Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.Rev. 7/12/18, GQCW2MP-E-V1
STEP 5 In a web browser, go to the correct setup instructions for your mobile device listed below:http://bit.ly/qseeplusFollow the online instructions for how to connect your camera to Q-See Plus on your mobile device.Q-SEE PLUS FEATURESYou can access more tutorials and information about features in Q-See Plus here:http://bit.ly/2Ce0RbNQ-SEE PLUS UPDATESFor updates for your camera and Q-See Plus, always check our support portal for additional trouble shooting and the most up to date firmware and customer support:https://qsee.custhelp.comSTEP 3 Download the Q-See Plus app from the App Store on your mobile device. Once installed, ensure that your mobile device is connected to the 2.4GHz Wi-Fi network you wish to use for your camera. Launch the app on your mobile device.STEP 4 We recommend following our online guide on a computer or different device than the one that you are configuring.STEP 1 Please register your device on the Q-See Support Portal at www.q-see.com/register to receive critical updates and support. Registering will help us to assist you with any technical or warranty issues if ever necessary.NOTE: Your username and password used to register your device are not the same as those you use to log in to your device. Please write down your username and password:Username: Password: Model #: QCW2MPSTEP 2 Plug in the camera into a surge protector and wait until the indicator light begins to flash. After 15-30 seconds, the light should slowly flash green which indicates it is ready to continue setup. If the light displays red, hold the reset button for 15 seconds until the light is off to reset the camera.WELCOME!Congratulations on your latest purchase and welcome to the Q-See family. This guide will help get your camera up and running.WHAT’S INCLUDED• (1) QCW2MP Wi-Fi Camera• (1) Power Adapter• (1) USB Cable• (1) Mounting Hardware• (1) Quick Start GuideIMPORTANT: Go through all of the steps to setup and test your device before mounting it. Visit www.q-see.com/support to find the most recent guides and up-to-date support for your Q-See products.

Navigation menu