Digital Peripheral Solutions QCW2MP Wi-Fi HD Camera User Manual
Digital Peripheral Solutions Wi-Fi HD Camera Users Manual
Users Manual
1080p WI-FI CUBE CAMERA MINI
QUICK START GUIDE
SPEAKER
LENS
RESET
BUTTON
INDICATOR LIGHT
ADJUSTABLE
BASE
MICROPHONE
MICRO USB
PORT
MICRO SD
CARD SLOT
DISCLAIMER: Although Q-See has made every effort to ensure that the information in this guide was
correct at the time of printing, Q-See does not assume any liability to any party for any loss, damage,
or disruption caused by any errors, omissions, or typos that may occur.
WARRANTY & SUPPORT
Q-See is always here to answer your questions and take your valued
suggestions. Please visit us at www.q-see.com/support for 24/7
support and access to our Support Portal.
Regulatory Information
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Attention that changes or modification not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This product generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and
your body.
Rev. 7/12/18, GQCW2MP-E-V1
STEP 5 In a web browser, go to the correct setup instructions
for your mobile device listed below:
http://bit.ly/qseeplus
Follow the online instructions for how to connect your camera
to Q-See Plus on your mobile device.
Q-SEE PLUS FEATURES
You can access more tutorials and information about features in
Q-See Plus here:
http://bit.ly/2Ce0RbN
Q-SEE PLUS UPDATES
For updates for your camera and Q-See Plus, always check our
support portal for additional trouble shooting and the most up
to date firmware and customer support:
https://qsee.custhelp.com
STEP 3 Download the Q-See Plus app from the App Store
on your mobile device. Once installed, ensure that your mobile
device is connected to the 2.4GHz Wi-Fi network you wish to
use for your camera. Launch the app on your mobile device.
STEP 4 We recommend following
our online guide on a computer or
different device than the one that you
are configuring.
STEP 1 Please register your device on the Q-See Support
Portal at www.q-see.com/register to receive critical updates
and support. Registering will help us to assist you with any
technical or warranty issues if ever necessary.
NOTE: Your username and password used to register your device are
not the same as those you use to log in to your device. Please write
down your username and password:
Username:
Password:
Model #: QCW2MP
STEP 2 Plug in the camera into a surge protector and wait
until the indicator light begins to flash. After 15-30 seconds,
the light should slowly flash green which indicates it is ready to
continue setup. If the light displays red, hold the reset button
for 15 seconds until the light is off to reset the camera.
WELCOME!
Congratulations on your latest purchase and welcome to the
Q-See family. This guide will help get your camera up and running.
WHAT’S INCLUDED
• (1) QCW2MP Wi-Fi Camera
• (1) Power Adapter
• (1) USB Cable
• (1) Mounting Hardware
• (1) Quick Start Guide
IMPORTANT: Go through all of the steps to setup and test
your device before mounting it. Visit www.q-see.com/support
to find the most recent guides and up-to-date support for your
Q-See products.