Digital Peripheral Solutions QCW3MP1B WI-FI SECURITY BULLET CAMERA User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	3748832
Application ID	CPinmCkpoJxgu+fOSwN13A==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	169.51kB (2118836 bits)
Date Submitted	2018-02-11 00:00:00
Date Available	2018-02-11 00:00:00
Creation Date	2017-11-22 10:11:37
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-11-22 10:11:44
Document Title	users manual
Document Creator	Adobe InDesign CC 2017 (Macintosh)

WI-FI SECURITY BULLET CAMERA
QUICK START GUIDE
ENGLISH
WHAT’S INCLUDED
Camera
Wi-Fi Antenna
Grommet
Mounting Hardware
Also included: 1 power supply & 1 weather seal (seal is for custom installs)
FEATURES
BEST IN CLASS
Setting the resolution
bar higher than 1080p
MOTION ALERT
Get alerts about
important activity
NIGHT VISION
See what’s happening in
pitch dark
MICRO SD CARD SUPPORT
Internal back up memory for
video storage
EASY SETUP
Less fuss, more
monitoring
ADD-ON
Expand your current
surveillance system
with ease
4
GET CONNECTED
Find the desired location for your camera to be placed. If you are going to be mounting the
camera, please use the included mounting hardware to secure the camera firmly to the wall.
Please make sure that you test the system completely before mounting the cameras.
• Slide the included rubber grommet onto
the antenna stem of the camera
• Screw the supplied Wi-Fi antenna on to
the bullet camera
• Plug in the included power supply to a
surge protector and plug in the power
supply to the Wi-Fi bullet camera.
You are now ready to setup the camera.
STEP 1
REGISTRATION
Before installing, please register your device at www.q-see.com/register on the Q-See
Support Portal to receive critical updates and support for your system. Registering will also
help us to assist you with any technical or warranty issues if ever necessary.
Please be sure to keep a record of your model number(s) and to save this guide, as
you will need this information if you are ever in need of technical or warranty support.
NOTE : Your username and password used to register your device are not the same as those you use to log in to
your system. Please write down your username, password, and model number(s) in the spaces provided below:
Name:
Password:
Model #:
STEP 2
DOWNLOAD & INSTALL THE QC VIEW APP
NOTE: Ensure that your mobile device is connected to
the Wi-Fi network you wish to use for your camera.
select the Menu
by Device Manager.
Download the QC View
App from the App Store on
your mobile device. Once
the App has been installed
button in the top left corner, followed
NOTE: If you already have a Wi-Fi NVR this camera will
automatically try to connect to it. Start using the NVR quick
start guide to complete setup. If you would like to use this
as a standalone device, disconnect or power off your Wi-Fi
NVR before proceeding.
*All screenshots in guide are
from QC View app on iOS.
STEP 3
ADD A NEW DEVICE
In Device Manager, Click “+” to add a new device.
Select “Wi-Fi configuration” and create a name
for your camera. Tap the QR code icon in the
SN field and then scan the QR code located on
the back camera panel (see photo below). Once
the QR code has been scanned, complete the
remaining username
and password fields
and hit next:
Username: admin
Password: admin
STEP 4
ADD A WI-FI DEVICE
Configure the network settings by entering the password of
your Wi-Fi network.
NOTE: The Wi-Fi network should be the same one used by your
mobile device.
STEP 5
START LIVE PREVIEW
Once your device has been added successfully, select Start
Live Preview to view the feed from your camera.
STEP 6
VIEW THE LIVE VIDEO FEED
Your camera has been set up successfully. You
can now access your camera feed anytime and
anywhere using the QC View App.
ADJUST THE BULLET CAMERA SHADE
You can adjust the bullet camera shade according
to your lighting requirements.
10
STEP 7
ADD TO AN EXISTING QC NVR SYSTEM
If you would like to add this camera to your existing QC Series NVR, login to your NVR and go to
Remote Devices. Select your camera from the device list and click Add. The camera feed will
appear on your NVR. The NVR has to be connected to the same network as your mobile device
for the initial setup process. Visit www.q-see.com/support to verify if your system is compatible.
*This screenshot is from a QC Series NVR.
11
ADDITIONAL FEATURES
MICRO SD MEMORY CARD
The micro SD memory card slot is located under
the bottom panel of the camera. Push the card
in firmly to load the card. To eject, press the card
firmly again. Some units will include an SD card.
CAMERA RESET BUTTON
If you wish to change the existing Wi-Fi network
to a different network, while the camera is
powered on, hold the reset button for 15
seconds and setup your camera again.
NOTE: SD memory card slot and reset button can both be accessed by removing the bottom panel
from the camera with a standard screwdriver. Reattach panel before mounting cameras.
12
NETWORK CABLE
Please do not worry about the additional
network cable on your bullet camera. This
network cable can alternatively be used to hardwire the camera using an Ethernet cable instead
of a Wi-Fi connection. Please make sure that this
cable is never exposed to moisture.
WARRANTY & SUPPORT
Q-See is always here to answer your questions and take your valued suggestions. Visit us at
www.q-see.com/support for 24/7 online support and access to our Support Portal.
13
14
Regulatory Information
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
1.2.51.32.Tgz001-000
Check online at www.Q-See.com for more information on our terms of service.
DISCLAIMER: Although Q-See has made every effort to ensure that the information in this guide was correct at
the time of printing, Q-See does not assume any liability to any party for any loss, damage, or disruption caused by
any errors, omissions, or typos that may occur.
15
Rev. 11/22/17, QCW3MP1B, QCW4, QCK81, QC826, QC838, QC838B, QC858,
QC8116, QC8816, QC8832, QC8916, QC8932
GQCWB-E-V2

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c138 79.159824, 2016/09/14-01:09:01
Create Date                     : 2017:11:22 10:11:37-08:00
Metadata Date                   : 2017:11:22 10:11:44-08:00
Modify Date                     : 2017:11:22 10:11:44-08:00
Creator Tool                    : Adobe InDesign CC 2017 (Macintosh)
Instance ID                     : uuid:1862173e-2577-8a4c-a69e-83ec089c998d
Original Document ID            : xmp.did:fddb5750-5e5e-4071-bdc9-1ff6d8d1ceac
Document ID                     : xmp.id:9df64b7c-62fc-4c06-979f-6e55b25f5c58
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:e5052513-f3df-42b8-8dcc-7dd745361050
Derived From Document ID        : xmp.did:6304bdac-dbd7-49a1-b2e9-607dae723f6f
Derived From Original Document ID: xmp.did:fddb5750-5e5e-4071-bdc9-1ff6d8d1ceac
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Macintosh)
History Changed                 : /
History When                    : 2017:11:22 10:11:37-08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CC 2017 (Macintosh)

EXIF Metadata provided by EXIF.tools