DigitalWay MPIO-FL400 MP3 Player User Manual
DigitalWay Co., Ltd. MP3 Player
Users Manual
Information to the user NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 1. Product Composition The accessories may look different from the image shown here and subject to change without prior notice. ① Main Composition FL400, Earphones, Mini USB, USB Extension Cable, Clip, Manual (or Quick Start Guide), CD, Warranty Card ② Optional Accessories Necklace, Arm-Band, Case 2. Control’s Overview Earphone & USB Reset Mic LCD Window Control Button 3. Information during playback on LCD Repeat Current track/All tracks Status EQ Remained battery Folder name Music information Current time Playback time 2. Before you Use 2.1 Connecting to the PC Connect the player to the PC USB port using the USB cable. ! If you use Windows 98/98SE, you should install Windows 98 driver first before connecting the player to the PC. * Windows ME, Windows 2000, and Windows XP operating system supports USB 2.0 or 1.1 storage device by default. Therefore, the player will be automatically recognized as a moveable disc without installing the driver. Once connected, you can use the player right away. 2.2 Saving music and data file !!! Illegal download or duplication of MP3 files protected by the copyright is prohibited by law. This product bears any responsibility on the issues related with the copyright. * Using as a removeable disc ① Connect the player to the PC using the USB cable. ② Check the “USB Connected” message on the product LCD window. ③ Open the Windows Explorer in your PC. ④ Your computer will recognize FL400 as a removeable disc. (You can check it in My Computer.) ⑤ You can save/delete the data, or create a folder using the same method as you handle the computer hard disk. (Save the data using ⓐ or ⓑ method as described below.) ⓐ Copy and paste: Select the data to save and click the right mouse button. Then, select the Copy menu and paste the data in a moveable disc. ⓑ Drag and drop: Select the data to save and drag it while holding down the left mouse button, and release the button on the moveable disc that was automatically recognized. ⑥ Then, the selected data will be saved in a moveable disc. 2.3 Disconnecting the Player from the PC It is important to follow this procedure to disconnect the USB cable from your player and the PC. If you don’t, you risk losing files as they are transferring to your player. 1. Click the USB icon on the Windows taskbar usually located at the bottom right of the desktop. 2. From the popup menu, select the Stop command. 3. After a notification message displays, you may disconnect the cable from the player. Windows 98 user - Windows 98 does not provide any command that enables to disconnect the player from the PC safely. Therefore, check the data transfer status before disconnecting the player from the PC. 3. Learning Basic Usage 3.1 Battery charging - The product battery can be re-charged by power supply through the PC USB terminal. ① Remove the Necklace-earphone and Connect the Mini USB to FL400. ② Extend the connection by usage of USB Extension cable. ③ Connect the other end of the USB cable to the USB cable connection terminal located at the left side of the player(PC). 3.2 Power On (Play)/Off (Stop) ① When you press the button longer, the logo screen will appear and then, the power is turned on and the file list will be shown. ② To turn it off, press and hold the button. ※ Playing back previous/next file Push button or * If you push button during playback to play the previous or next file. button within 10 seconds after file playback, the beginning of the current file will be played back. * If you push button after 10 seconds from file playback, the previous file will be played back. ※ Fast Forward/ Fast Rewind function If you push and hold (right) button , the player performs the fast forward function. If you push and hold (left) button , the player performs the fast rewind function. ※ Pause/ Releasing pause During playback, press the Press the button to pause. button again to resume playback. 3.4 Navigation (1) Navigating music files during playback or while paused ① Press the MENU button shortly to switch to the file list screen from playback or pause screen. ② Push + or – button to move to the target file. To move to the sub-folder, push the To move to the upper folder, push the button or press the button. button. (2) Navigation for playback ① Press the MENU button shortly, Display on LCD switches playback to file list status. ② You can move between files by pushing + or – button To move to the sub-folder, push the To move to the upper folder, push the 3.5 Controlling Volumes ① Volume up: Push the + button. ② Volume down: Push the - button. * Volume levels: 0 ~ 40 button or press the button. button. 4. Switching the Mode (Listen to Music <-> Listen to FM Radio) ※ If you press the MENU button longer in playback or pause status, you can switch to MP3, FM Radio, Voice mode by using mode menu. ① Press the MENU button longer in playback or pause status. ② Push +/- button to move intended menu and choose mode. ③ Push the MENU button shortly and change the mode by using + or – button. (Figure1. Example in changing to Radio mode from Mp3 playback) 5. Listening to FM radio ① Press the MENU button longer in the playback or pause status, or during navigation. ② Push the + or - button to move to the mode menu and then, push the MENU shortly to enter the mode-change. ③ Choose the Radio and change the mode. ④ You can find the frequency by pushing the stick to or directions. (1) Switching between channel mode and scan mode You can switch the reception mode of FM (channel <->scan) by pressing the MENU button. ※Scan Mode You can change to receiving frequency by pushing the stick or directions. ※Auto Scan Function Push and hold the or button, the frequency will change automatically to good receiving. ※ Channel Mode If you choose the ‘ON’ at Auto Preset setting in Radio menu, the player will scan and save all possible broadcasting frequency automatically. After that, you can listen to radio in channel mode. You can move to channels that saved frequency by pushing the or button. (2) Saving Channel This is a function that saves the received frequency in channel during scan mode. You can save frequencies up to 20 channels①Change to receiving frequency by pushing the or button and choose the channel to save. ② When you press the button, the list window will appear. ③ Push the + or – button to move channel number and push the button to save the channel. (3) Recording FM radio You can record the receiving FM radio. ① Change To FM radio mode ② Change to receiving frequency by pushing the or button and choose the channel to record. ③ Choose Recorder in mode menu, then the player start recording. ④ To finish the recording, press the button. * The FM radio recorded files are stored in the RECORD folder by the file name of FM001.mp3, FM002.mp3 etc. 6. Recording Voice ① Press the MENU button longer in the playback or pause status, or during navigation. ② Push the +or – button to move to the mode menu ③ Push the MENU button to enter in the mode menu, and then choose the Recorder. ④ To start recording the voice, press the ⑤ To finish the recording, press the button. button. * The voice recorded files are stored in the RECORD folder by the file name of VOICE 001.MP3, VOICE002.MP3 etc. 7. Technical Specification Dimensions Weight LCD 46 x 28 x 13mm 25.5g 1" (128 x 48, White FSTN) Internal Memory 256/ 512MB / 1GB / 2GB Decoding Format MPEG 1/2/2.5 Layer3, WMA(PD DRM),OGG,(Q1~Q10) Voice Recording Audio FM Radio MP3 Frequency Range 20Hz ~ 20kHz S/N ratio 90dB Output Power 15mW/Channl (EU : 6mW/Channel) Frequency Band 87.5MHz ~108MHz(Kor,USA,EU) 76 MHz ~ Language 102MHz(Japan) S/N ratio 50dB FM Recording MP3 Menu language English, Korean, Traditional Chinese, Simplified Chinese, Japanese, PC Interface ID 3 Tag language 55 languages PC Interface USB 2.0 File Transfer Rate Approx. 16Mbps Supported OS Windows 98SE/ME/2000/XP Mac 9.2.2 ~ Mass Storage Class Operating Temperature -5℃ ~ 40℃ * Actual usable capacity can be changed via the logic file system regardless of the physical capacity of FL400. * The warranty does not cover PC connections with the use of extended cords like the USB hub, etc. * Data transfer rate may vary depending on the computer systems. * Battery Life may vary depending on the usage, configuration and condition. 8. Computer system requirements (1) PC ① System: USB Interface (Rev 1.1) standard equipment and built-in CD-ROM driver ② CPU: Pentium 133 MHz or higher ③ Memory: 64MB or higher ④ Hard disk space: 20MB or higher ⑤ Operating system: Windows 98/Me/2000/XP (2) Macintosh ① System: USB Interface (Rev V1.1) standard equipment and built-in CD-ROM driver EX) Power Mac G3(Blue & White)/G4/G4 Cube, iMac/iBook, Powerbook, Powerbook G4 ② Memory : 64MB or higher ③ Hard disk space : 20MB or higher ④ Operating system : MacOS 8.62~9.2, MacOS X(10.1)(iTunes 2,3,4 Plug-In)M PC * The warranty does not cover PC connections with the use of extended cords like the USB hub, etc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Modify Date : 2005:10:14 09:58:04+09:00 Create Date : 2005:10:12 15:47:23+09:00 Tag Ad Hoc Review Cycle ID : 1009171311 Tag Email Subject : fg200 영문파일입니다. Tag Author Email : bgpark@imuskorea.com Tag Author Email Display Name : 박병건 Source Modified : D:20051012063846 Page Count : 9 About : uuid:d3243ef6-bedc-431b-9c46-6a4e05dcac19 Producer : Acrobat Distiller 6.0.1 (Windows) Mod Date : 2005:10:14 09:58:04+09:00 Creation Date : 2005:10:12 15:47:23+09:00 Author : 김영지 Headline : Creator Tool : Word용 Acrobat PDFMaker 6.0 Metadata Date : 2005:10:14 09:58:04+09:00 Keywords : Document ID : uuid:9a6af03d-6589-430b-a486-218503e134c7 Version ID : 13 Format : application/pdf Title : 인사말 Creator : 김영지 Subject : Tagged PDF : YesEXIF Metadata provided by EXIF.tools