Displaydata 120-0084 Bounce Ethernet Communicator User Manual 550 0013 02 2

ZBD Displays Ltd Bounce Ethernet Communicator 550 0013 02 2

Contents

Manual 1

ZBD DISPLAYS LTD Ethernet Communicator Installation Guide
Z B D D I S P L A Y S L I M I T E D Installation Guide  ZBD Displays Limited Orchard Lea Winkfield Lane Windsor Berkshire SL4 4RU England Tel. +44 (0)1344 887 685 Fax. +44 (0)1344 887 601 Email: support@zbdsolutions.com Web: www.zbdsolutions.com Document Number: 550-0013-01 Date: 13th July 2011 The information disclosed herein is the exclusive property of ZBD Displays Ltd. and is not to be disclosed without the written consent of ZBD Displays Ltd. No part of this publication may be reproduced or transmitted in any form or by any means including electronic storage, reproduction, execution or transmission without the prior written consent of ZBD Displays Ltd. This document is intended for limited circulation. The information contained in this document is subject to change without written notice and should not be construed as a commitment by ZBD Displays Ltd. unless such commitment is expressly given in a covering document.
Table of ContentsEthernet Communicator................................................................... 1 Check Package Contents.................................................................. 1 Regulatory Information.................................................................... 2 Safety Notices .................................................................................... 2 Radio Transmission Regulatory Information ...................................... 2 USA - Federal Communication Commission Interference Statement... 2 Europe - CE Declaration of Conformity................................................ 2 Warranty and Support Services...................................................... 3 Technical Support............................................................................... 3 Return Merchandise Authorization ..................................................... 3 One Year Limited Warranty ................................................................ 3 WEEE Statement (Waste, Electrical and Electronic Equipment) .......... 3
D I S P L A Y S L I M I T E D 1 Ethernet Communicator The Communicator transmits the image to the correct displays (epops) and controls the status of the epop network. Installation of the software/drivers is covered in documentation available from support@zbdsolutions.com Check Package Contents • Ethernet Communicator • PSU • Ethernet cable All packing materials are recyclable.
D I S P L A Y S L I M I T E D 2 Regulatory Information Safety Notices Take some time to read through the safety notices before installing the Ethernet Communicator. Please observe all safety markings and instructions when using this product. Radio Transmission Regulatory Information The Ethernet Communicator and the epop label have been tested to comply with the following standards. This product must be installed and used in strict accordance with the instructions given in the user documentation. The Ethernet Communicator and epop label complies with the following radio frequency and safety standards: USA - Federal Communication Commission Interference Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Europe - CE Declaration of Conformity We, ZBD Displays Limited of Orchard Lea, Winkfield Lane, Windsor, Berkshire, SL4 4RU, England, declare under our sole responsibility that the ZBD Ethernet Communicator and epop, to which this declaration relates is in conformity with the following standards and/or other normative documents: EN300 220-2 V2.1.1 EN300 220-1 V2.1.1 EN301 489-1 V1.6.1 EN301 489-3 V1.4.1 EN60950-1:2000 A11:4 We, ZBD Displays Limited, hereby declare that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can be used in but is not restricted to the following countries: UK, Germany, Austria, Belgium, Switzerland, Netherlands, Luxembourg, Italy, France, Ireland, Spain, Portugal, Sweden, Norway, Denmark, Finland, Czech Republic, Hungary, and Greece.
D I S P L A Y S L I M I T E D 3 Warranty and Support Services Technical Support Should you require technical assistance, please contact ZBD Displays Limited. Tel. +44 (0)1344 887 685 Fax. +44 (0)1344 887 601 Email: support@zbdsolutions.com Web: www.zbdsolutions.com Return Merchandise Authorization Please contact our support center for an RMA number before sending your product to the repair address. Product sent to the repair address without an RMA number will be returned unopened. In Europe: ZBD Displays Limited, Orchard Lea. Winkfield Lane, Windsor, Berkshire, SL4 4RU, England Tel. +44 (0)1344 887 685 Fax. +44 (0)1344 887 601 Email: support@zbdsolutions.com Web: www.zbdsolutions.com One Year Limited Warranty • This device is guaranteed against manufacturing defects for One full year from the original date of purchase. • This warranty is valid at the time of purchase and is non-transfer able. • This warranty must be presented to the service facility before any repair can be made. • Sales slip or other authentic evidence is required to validate warranty. • This product should be installed and used in accordance with the instructions detailed in this user guide and serviced at an approved ZBD Displays Service Centre. Failure to comply with these conditions may render the warranty void. • Damage caused by accident, misuse, abuse, improper storage, and/or uncertified repairs is not covered by this warranty. • All mail or transportation costs including insurance are at the expense of the owner. • Do not send any product to service center for warranty without a RMA • (Return Merchandise Authorization) and proof of purchase. Ensure a track able method of delivery is used (keep tracking number). • Warranty is valid only in the country of purchase. • We assume no liability that may result directly or indirectly from the use or misuse of these products. • “This warranty will be voided if the device is tampered with or improperly serviced" WEEE Statement (Waste, Electrical and Electronic Equipment) The WEEE directive places an obligation on all EU-based manufacturers and importers to take-back electronic products at the end of their useful life. ZBD Displays Limited accepts its responsibility to finance the cost of treatment and recovery of redundant WEEE in accordance with the specific WEEE recycling requirements. The symbol (shown) indicates that this product must NOT be disposed of with other waste. Instead it is the user’s responsibility to dispose of their waste electrical and electronic equipment by handing it over to an approved reprocessor, or by returning it to ZBD Displays for reprocessing. For more information about where you can send your waste equipment for recycling, please contact your local city office or ZBD Displays support offices. ZBD Displays has applied to become a member of a compliance scheme. Our Producer Registration Number has been filed and we are waiting for a registration number. RoHS - Restriction of Hazardous Substances ZBD Displays is fully aware of the new legislation and has taken steps to ensure that all products are RoHS Compliant and as a "Producer" of product ensures that we meet the new regulations.

Navigation menu