OPTICUM_XS65_HD_SAT_RECEIVER Ver. 01 001244042 An En OPTICUM XS65 HD SAT RECEIVER

User Manual: OPTICUM_XS65_HD_SAT_RECEIVER - Ver. 01 HD SAT receiver Opticum XS65 Card reader, Recording function from Conrad.com

Open the PDF directly: View PDF .
Page Count: 49

Download
Open PDF In Browser	View PDF

Receiver
XS65

Manual

digital satellite receiver

KK 02/15

Contents
Brief description

1.1 Basic features
1.2 Package Contents
1.3 Front panel
1.4 Rear Panel
1.5 Remote Control

4
4
5
5
6

Installation

2.1 Connection
2.2 First start
2.3 List of satellites
2.4 Antenna Installation
2.5 Easyfind
2.6 Automatic switch-off of the receiver
2.7 Conditional Access Card

8
9
11
12
19
19
19

Operation
3.1 Basic functions
3.2 Changing channels
3.3 Sleep Timer
3.4 Information Bar
3.5 EPG (electronic program guide)
3.6 TIMER
3.7 Radio channels
3.8 Find
3.9 Mailbox
3.10 PVR – recording programs
3.11 Time Shift
3.12 Status
3.13 AUDIO
3.14 Teletext
3.15 Subtitles

20
20
20
21
21
21
23
24
24
25
25
27
28
29
29
29

Menu
4.1 Main Menu
4.2 Edit Channel
4.3 Installing the antenna
4.4 System Settings
4.5 Media player
4.6 Network / APP
4.7 Access Card
4.8 Setup Disk

Troubleshooting
Safety Precautions
Environmental protection
Technical Specifications

Contents

30
30
30
33
33
38
40
42
43

44
46
48
49

Brief description
1.1 Basic features
1. Smart Card reader in Conax Conditional access system
2. Support of SD / HD (MPEG2 / H.264), DVB-S, DVB-S2
3. High resolution video output - HDMI
4. Standard video output - SCART
5. 2 ports in USB 2.0 standard
6. PVR Ready – recording to an external drive
7. Time Shift (video pausing and rewinding)
8. Automatic Stand-by
9. Low power consumption in stand-by mode, below 1W
10. DiSEqC system operation
11. Multilingual menu
12. Electronic Program Guide - EPG
13. 4-digit LED on the front panel
14. Media player Full HD 1080p
15. Globo Remote – an app for Android devices
16. Internet Radio
17. Fast Channel Change
18. Subtitle support

1.2 Package content
1.
2.
3.
4.

Receiver
Remote Control,
Batteries - 2 x AAA (optional)
User Manual

ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH ENGLISH

Quick Start
Digital Terrestial Receiver
• Slot for Smart Card
• Support of SD/HD (MPEG2 / MPEG4) DVB-C systems
• High deﬁnition video output - HDMI
• Standard resolution video output - SCART
• High speed USB 2.0 port
• PVR Ready
• Time Shift (pause, rewind)
• Automatic Stand-by
• Low power consumption in Stand-by mode,
below 1W
• Multilingual menu, including English
• Electronic Program Guide - EPG
• 4 digit LED display on front panel
• Multimedia Player Full HD 1080p
ModelID: X2

KP 07/2012

1.3 Front Panel

display

change channels/
move cursor

Power on/off

1.4 Rear Panel
signal
input

card reader

USB1
PVR

Brief description

S/PDIF

HDMI
output

ethernet

SCART
output

USB2
WiFi

power cord

1.5 Remote Control

Button

Function

POWER -

Turns on / off the receiver from / to standby mode

HDMI

Switches HDMI output resolution of the image.

MUTE -

Turns on / off the sound.

0–9

Set the channel; Allows you to enter the parameters in the menu.

FAV

Display the list of groups of favorite channels by a category.
Select the auto switch to standby mode. Off / 10/30/60/90/120 min.

LAST -

Switch to previously viewed channel.

Displays the main menu on the screen; goes back to the previous
menu level.

INFO

Display information about the current function or a channel information bar.

EPG

Displays the electronic program guide on the screen.

EXIT

Cancel the user selection; proceeds from the menu to the viewing
mode.
Regulate the volume of the receiver; controls the cursor left / right.
Changes channel; controls the cursor move up / down.

Displays the channel list. Select function in the menu.

TV/

Switch between TV and Radio mode.

FIND

Allows you to search channels by name.

P-/P+

Switches to the next or previous page in the channel list and in the
EPG view.

HOME

The optional function (depending on the software version of the
receiver).

MAILBOX

Displays a list of payments in the Conditional Access Card menu.
This function is optional

PVR

Open PVR recordings. Inserted disk is required.

STATUS

Displays information about the receiver.

AUDIO

Audio settings / select audio track.

TEXT

Show teletext of the channel (if available).

SUB-T

Configuration of subtitles.

SLOW, SKIP-, SKIP+,
REW, FF, PLAY,
PAUSE, STOP, REC

Control video functions (time shift, playback, recording).

colorful buttons

various functions depending on the menu

Brief description

Installation

Read this chapter to find out:
1. how to connect the receiver to your TV,
2. how to install the antenna,
3. how to configure the receiver,
4. and how to use the USB drives with the receiver.

2.1 Connection

4
3
1
2
1 Connect the antenna to the input according to the installation guide on
the screen. 2 Connect the flat screen TV with an HDMI cable or 3 connect
CRT TV using a SCART cable. 4 Plug the power cord into an electrical
outlet.

2.2 Starting up for the first time
Turn the TV on and using its functions set the input to the receiver. Turn on
the receiver by pressing the POWER button . The installation guide OSD (On
Screen Display - items displayed on the screen by the receiver) will appear on
the screen. In the subsequent stages of the guide, you can set the basic parameters of the receiver. At any time you can return to the previous options
using the EXIT button and then you can change your selection. All the setting can be changed in the main menu again.

2.2.1 Language Selection
When you start the guide, the receiver asks you first to select the language.
Press / to select the desired language and press OK.

2.2.2 Selecting the screen format
Choose the right aspect ratio for your screen (Auto, 4: 3 Pan Scan, 4: 3 Letter
Box) or 16: 9 Widescreen) and press the OK button.

2.2.3 End of the Guide
After a suitable USB is connected, press OK. The receiver will show a message
that it is ready to work. You can go watch, go back to connection of the antenna or settings in order to fine-tune and search for channels. The receiver
will also test the signal. If the tuner is not configured properly, the signal will
not be received correctly and you cannot see all the available channels.

2.3 List of satellites
Press / to select the item you want to edit. Using the red button you can
change the name of the satellite, and also set the length and direction of E East and W - West.

Installation

[OK] – Select Use the OK button, select the satellite to be received – a
star symbol will show, which satellite is selected.
Edit Using the red button you can change the name of the
satellite, and also set the longitude and direction of E-east
and W - West. Enter values using the numeric buttons on
the remote control. Use colorful buttons for appropriate
action. Red changes case, green removes characters, yellow
confirm changes and blue cancel them.

Add

sing the green button, you can add a satellite. Edit it in the
U
same way as described in the section above - Edit.

Delete

ith the blue button, you can delete a satellite from the
W
list. Removal of the satellites will delete access to the
transponders and the channels. A message on the screen
will warn you about that. If you really want to delete the
satellite, highlight „Yes” and press OK.

2.4 Antenna Installation
In this menu, you can install the antenna and then search for channels. Antenna installation process is often complicated because it requires technical
knowledge and additional multiple devices. In many cases you will not need
the knowledge of the advanced settings. Modern technologies allow to adjust the antenna without leaving home, using the receiver. When installing
the antenna, however, it is necessary to use additional manuals for the antenna, converters, switches or motor used. For a single LNB, leave the default
configuration for DiSEqC switch, select the appropriate port settings and select Scan using colored keys.
The strength and the quality of the signal is shown on the bottom of the
screen in the form of strips and percentages.Use this as a hint to set up the
antenna the best way.
Press / to select the item you want to set, and then using the
the appropriate settings.

give it

2.4.1 Scanning options - color key functions
Change to motor
/Change to fixed

Installation

Press the white button to select motor
or LNB for adjusting the antenna position.

Scan the satellite Press the Red button to scan a single satellite. Detailed satellite scan options:
Satellite
Select the satellite to scan.
FTA Only Select No or Yes, if you want to search only unencrypted channels.
Network search Select No or Yes, if you want to scan only the frequencies with the NIT (Network Information Table).
Tuner Choose a tuner if there is more than one connected.
Scan Press OK to start a scan.

TP search

Transponder scan. Press the green button to scan the
transponder. In the window that appears after 3 seconds
on the screen, set the options:
FTA only Select Yes if you want to search only unencrypted
channels.
Scan channels
Select the type of channels you want to search (TV,
radio, or both at once).
Network search Select Yes, if you want to scan only the frequencies with the NIT (Network Information Table).
When this option is selected, the progress bar is
not display.

Press / to go to OK and press the OK button to start
scanning, or choose Cancel to return to the settings.
Edit TP
Operations in the transponder list. Press the yellow button to see a list of transponders. This feature is also available after pressing the green button and after an exit from
the window of a single transponder scan settings. Press /
to change the satellite. Using the / buttons select the
transponder. You can read the signal strength and quality.

Installation

Features available in the edit transponder window (colored buttons):
Edit
S et frequency, symbol rate and polarization for
the selected transponder.
Add
Add a new transponder, set its frequency, symbol
rate and polarization.
Delete
Delete a transponder. Confirm your decision by
selecting „Yes” and press OK or select „No” to exit.
Search
S can a transponder as in TP Scan menu (described
above).
Blindscan Automatic scan. Press the BLUE button to go to search for
channels without making any additional settings. Blindscan is an operation that scans all available transponders
and frequencies, and therefore takes longer than other
scans to finish.

2.5.2 Scanning options – using the LNB

Press the white button to select how to set the antenna to the LNB.
Satellite Select the satellite you want to use. You can choose from
the satellites that were previously selected and marked
with a star on the list of satellites.
LNB Frequency Select the frequency at which the converter is working. This
choice has an impact on what further options are possible
to set in this menu.
Transponder

Select a transponder according to your needs.

DiSEqC1.0

Select the port to which you have connected the DiSEqC.

DiSEqC1.1

Adjust the DiSEqC1.1 to receive signals from more sources.

22K

isable 22K for LNB with unusual frequency. With universal
D
values, the parameter is set to „Automatic”

Easyfind

E nable EasyFind, if you have a converter that supports it.
This function is described in section 2.6 on page 19.

Installation

IF Channel Select IF Channel (1 to 8).
Delete all

Delete all the settings of the antenna; available if
the DiSEqC1.2 was selected.

Motor Setting detailed settings of the motor.
(Different settings depending on the selected
standard USALS / DiSEqC1.2)

Settings for DiSEqC1.2:
Satellite Press / to select the satellite. You can choose
from satellites marked with a star symbol that are
already on the list of satellites.
Transponder
Press / to select a transponder.
Position No.&Save P
ress / to select the number you want to assign the position of the antenna.
Go to X Go to the saved position.
West Save/Stop East
Press / to rotate the antenna to the west or to the east.
Press OK to save the item under the pre-selected number, or to stop
the rotation of the antenna.
Recalculation Highlight and press OK to calculate and check the
position of the antenna.

Settings for USALS:
Satellite
Press / to select the satellite. You can choose
from satellites marked with a star symbol already
on the list of satellites.
Transponder
Press / to select a transponder.

The antenna should automatically turn to the selected satellite and
transponder.
Limit setup this settings allow you to set lthe farthest point to which
the rotor turns the antenna. This function is used when
there are physical barriers that would stop the antenna.
Press / to turn on the western or eastern limit. Using
button go to West < Limit setup > East. Press / to turn
the antenna to the west or east, and press OK. There will
be information of the limit that was set on the screen. To
return to the relevant point, press and then click OK.

Installation

2.5 Easyfind
Easyfind is a feature that allows you to set the position of a satellite dish
without compass, another person and technical understanding. You need
the matching Easyfi nd LNB (which is the gizmo on the end of the dish arm
that collects the satellite signal and sends it to the receiver). Set the elevation
of the dish according to your location and point the dish East. In the Antenna
Installation menu choose a satellite and go to the right column with features
of a satellite and scroll down to Easyfind. Enable it with the button. The diode
on the LNB now will indicate if the satellite dish receive strong signal. Slowly
move the dish. If the light pn LNB glows yellow it means you get the dish closer to stronger signal. Continue slowly until it fl ashes green and then when
it glows permanently green you are locked onto the satellite with a strong signal. If you want to adjust the dish to satellite again you can turn on Easyfind
function in the status menu.

green diode on
the LNB

2.6 Automatic Power Down
In accordance to the EU requirements, your receiver has been equipped with
the „Automatic Power Down” function. After a set amount of time, the receiver will automatically switch to the standby mode. It means that in practice, if the receiver doesn’t receive any signal from the remote controller or
from the buttons on the front panel, it switches itself off. Depending on the
model, this function is either on or off. You can disable or enable it using appropriate settings in the menu.

2.7 Conditional Access Card
Without a conditional access card inserted, the device can only receive unencrypted channels. Insert the card to be able to watch encrypted channels.
The card can be obtained from satellite TV providers.
Insert the card into the reader a gold chip facing up. Note! If the location
of the card reader in your decoder is different from the picture above, insert
the card the gold chip facing downwards.

Installation

Operation

Read this chapter to learn how to use and set up the receiver, depending on
your needs.

3.1 Basic Features
To turn your receiver ON or to Standby, use the button on the remote control. Choose the desired channel with the / buttons. Alternatively, you can
input the channel number with the numeric buttons on the remote control.
Press OK in viewing mode to display the TV Channel List. The volume can be
adjusted with the / buttons.

3.2 Changing channels
Your receiver is equipped with several ways to change the channels.
1. Directly by selecting the channel number buttons 0-9.
2. Through the channel list and OK button.
3. Using the P +, P- or / .
4. Through the EPG.
5. Through the FAV button – lists of favorite channels.
6. Through the button, to switch to the previously viewed channel.

Direct access through the 0-9 buttons
To gain direct access to a certain channel, simply input its number with the
0–9 keys on the remote control. Channel numbers can be up to four digits
long. Entering a number with less than four digits is possible. Just wait a few
seconds and your receiver will switch to the selected channel or press OK immediately after selecting the channel number.

Channel List
Press OK in viewing mode to display a list of channels. Use /
in the channel list to highlight the desired channel and press OK again to
switch to it. Press / or P +, P- to go to the next or previous page by ten
channels. Press OK again to exit the Channel List.

P+, P- or /
The P+ and buttons to switch to the next channel.
The P- and buttons to switch to the previous channel.

EPG
Press the EPG in viewing mode to display the electronic program guide. Use
/ , to select a channel from the list and press OK to switch to it.

Favorite
Use the FAV button to see a list of your favorite channels. Use / , to select a
category and then a channel from the list and press OK to switch to it.

Previous
Use the

button to switch to the previously viewed channel.

3.3 Sleep Timer
Press on the remote control to set the time after which the receiver turns
off automatically. Press the appropriate number of times to set the desired
time. You can set the time after which the receiver will automatically turn off
to 10, 30, 60, 90, or 120 minutes.

3.4 Information bar
While watching TV you can press the INFO button to display information
about the current program. Using the / buttons you can view information about the following programs on this channel.

3.5 EPG (Electronic Program Guide)
Electronic Program Guide is a function that allows, among others, to view the
current TV program. EPG information is derived from satellites and are dependent on the sender, so the lack of information in the EPG is not due to malfunction of the receiver.
In view of the EPG on the left side is the channel list on the right programs. Use
/ to select the channel. Press OK to switch to the selected channel.
By using the P- and P + change the page - switch EPG view to the next or the
previous ten channels.
Using the
and
buttons zchange the day for which an information is
Operation

displayed.
Using the REC button, add or delete a recording. This function is described in
the next section 3.6 TIMER
Info bar displays information about the current program. If you want to enlarge it, use the INFO button on the remote control.
In the menu „System Settings” EPG settings (detailed on page 37), you can
configure the behavior and style of the EPG. There are two different styles:
the schedule and the newspaper.

EPG – schedule

EPG – newspapaer

3.6 TIMER
Timer is a function, which can be accessed via the EPG menu by pressing the
REC button. Use the cursor keys to navigate through the options in the
timer settings.

•

Timer mode

ress / to set the recording mode. Recording – sinP
gle recording; Cyclic recording – recording repeated
regularly.

Start recording

vailable if the recording mode is selected. Set the numA
ber of minutes before the scheduled program, when the
receiver is to start recording (from 0 to 30).

Stop recording

Available if the recording mode is selected. Set the number of minutes after a scheduled program when the receiver is to stop recording (from 0 to 30).

Repeat
recording

vailable if cyclic recording mode is selected. Recording
A
can be repeated every day, once a week or several times
a week.

Choose
weekdays

Available if cyclic recording mode is selected. Highlight
the day and press OK to select the day of the week when
the recording is to be repeated. If you select a few days,
the receiver will ask you if you want to change the mode
to repeat a few times a week.

Don’t show this
window in the
future

available if the recording mode is selected. Mark and
save, if you want to disable a window showing the details of the recordings in the EPG view.
This window can be turned back on in the System Settings menu, recording menu (detailed on page 44),
where you can also set the default additional starting
and ending times of the recordings. Recording mode
is set to recording by default.

Operation

3.7 Radio channels
The receiver is adapted to receive and play digital radio channels available
from a satellite. Use the TV/ button,to switch between TV and radio channels. Radio channels have their own list and EPG. You can manage the radio
channels almost the same way as TV channels.
The receiver also allows you to receive Internet radio via ethernet or wireless
network. This feature is described in detail on p. 41.

3.8 Find

Find is a function that allows you to search for a channel by typing its name.
Press FIND on the remote control to display the Find window. Use the cursor
keys to select a desired character and press OK to enter it into the text box.
After entering the first letter, a list of channels that contain it in their name.
Press the blue button or move the cursor to „Return” to go to the list of found
channels. Press / to select the found channel and press OK to display it.

3.9 Mailbox
This function is optional. Your service provider may send you information
about services and payments. To see a list of messages from the operator,
press MAILBOX (green button).
If you receive a new message, the screen displays the envelope symbol.

3.10 PVR – recording programs
List of recordings
Press the yellow button (PVR) to go to the list of recordings. Already made
recordings are marked with white color and scheduled recordings are red.
Press / to select the recording from the list to edit it. Edit the list of recordings using the colored buttons:
Rename
R
ename planned or existing recordings. By default, the recordings are saved under the name of the channel.
Block
A
vailable only for existing recordings. This function allows
you to assign a password to a recording which prevents
from playing it by unwanted people.
Delete
Delete the selected recording.
Add recording P
lan an another video recording.

Add a recording
Press / to select the type of setting you want to change.
Wakeup channel Press
/
to select the channel that broadcasts the
program you want to record. You can also press OK to
display the drop-down list that can be browsed using the
/ buttons.
Wakeup Date Set a date of a planned recording. Press / to highlight
a digit in the date you want to change, and then enter
a new one by using the numeric buttons.
On time

S et a time for a planned recording. Press / to highlight
a digit of the time you want to set, and then enter a new
one by using the numeric buttons.

Duration

Set a duration of a recording using the numeric buttons.

Timer mode

ress / to set the recording mode. Recording – a single
P
recording; Cyclic recording – a recording repeated regularly.

Operation

Start recording

vailable if the mode is set to recording. Set the
A
number of minutes before the scheduled program
for the receiver to start recording (from 0 to 30).

Stop recording Available if the mode is set to recording. Set the
number of minutes after a scheduled program for
the receiver to stop recording (from 0 to 30).
Repeat recording
Available if the mode is set to cyclic recording.
Recording can be repeated Daily, weekly or several
times a week.
Choose weekdays
available if cyclic recording mode is selected.
Highlight a day and press OK to select a day of the
week on which the recording is to be repeated. If you
select few days, the receiver will ask you if you want
to change the mode to repeat a few times a week.

Recording
To make recording possible, connect the USB drive to the receiver. The recording time depends on the size of the USB memory. In a viewing mode, recording directly from the remote control can be turned on by pressing REC.
The receiver will ask „Do you want to stop the recording at the end of the
program?” With the EPG the receiver knows when the scheduled program
ends and can stop the recording. Select Yes if you want the receiver to end
recording at the right time or not, if you want to decide when to stop it. To
stop the recording, press the STOP button and confirm it selecting Yes.
During recording, you can do the following:
Press (PAUSE) to stop the program. The receiver will continue to record
the rest of the program.
Press (PLAY) to play the program after a pause.
Press (STOP) to stop recording.
Press
(REW) /
(FF) to rewind and play fast forward.
Use the
(SKIP–) /
(SKIP+) to go back and forward by a set amount
of time.
Use the (SLOW) to slow down the playback of the program.

•

••
••
••
••
••
••

3.11 Time Shift
Time Shift allows you to stop playing the current program and resume it
later. When using the time shift function, you can not change the channel. To
do this, you must stop the function using the button (STOP). During recordind this function is unavailable.
Press (PAUSE) in viewing mode to start the time shift function.
Press (PLAY) to resume the program.
Press (STOP) to return to the playback of the current live program.
Use the
(REW) /
(FF) to rewind and play fast forward.
Use the
(SKIP–) /
(SKIP+) to go back and forward by a set amount
of time.
Press (SLOW) to slow down the playback of the program.

••
••
••
••
••
••

3.12 Status
To view information about the receiver, its software and its current operation, press the STATUS (blue button).

Operation

In this window, you can see which channel and which satellite and transponder is being read. There are also information about the both possible tuners:
status, signal strength and quality.
In the receiver status there is also available the EasyFind function. Press the
red button to turn it on or off.

3.13 AUDIO
Some channels provide transmission in several audio formats and in different languages. To select a different audio track, press AUDIO. The list of available audio tracks will be displayed. Use / , to select the desired audio
track and confirm your choice with OK.

3.14 Teletext
Some satellite channels provide a teletext. Teletext is a service that offers
a variety of textual information, usually on the news from the world, sport,
weather and TV program. Access to teletext can be obtained via the TEXT

button. Use 0-9 to enter the number of the page you want to view. Colored
buttons on the remote control allow you jump to a specific page immediately, as indicated at the bottom of the teletext. Use / to select the previous
or next page. Press EXIT or TEXT to exit.

3.15 Subtitles
Some channels provide subtitles. Press SUB-T while watching to see a list of
available subtitles. Select subtitles using / and confirm your choice with
OK. Press EXIT to exit without making changes.

Operation

Read this chapter to learn how to use the menu of the receiver, and setbthe
receiver to fit your needs.

4.1 Main menu
To access the main menu, press the MENU button while in the viewing mode.
Use the cursor keys to navigate through the menus. Use the OK button to select the submenu. Press EXIT or MENU to return to the previous screen.

4.2 Edit Channels
Select Edit channels using the cursor keys and press OK to enter. Use / , to
highlight the selected submenu and press OK to enter it. Press EXIT or MENU
to return to the previous menu.

List of TV channels
Select a list of TV channels with / and press OK to enter. In this menu you
can manage the list of channels.

Use / to select the channel you want to select, and then press OK. You can
also use to select or deselect all channels.
Favorites Use the WHITE button on the remote control. Then use /
to select the category you want to assign to a channel and
press OK.
Lock You can lock selected channels so that it can be viewed
only after entering the code – the red button on the remote
control (default password: 0000).
Skip Channels will be marked to skip when changing channels
with / . Despite this, they will be still accessible from the
Channel List. To select the channels to be skipped press the
green button.
Move

T o activate the move function, press the yellow button. You
can then move selected channels and change the order of
the channel list using the / buttons.

Delete Press the blue button to activate the Delete function. The
selected channel will be deleted from the list. Select Yes to
save the changes or No to discard them.
Rename Press
to switch to the channel name change. After
entering the new name, save the changes by pressing the
BLUE button on the remote control.
When you exit the menu after modifying the list, confirm your choice selecting YES, if you want to save the changes or select NO to discard them.

List of radio channels
Managing the list of radio channels is the same as it is for the list of television
channels.

Favorites
Select Favorites – use / and press OK to enter. In this menu you can manage groups of favorite channels.
Groups of favorites are created by default. They are movies, music, news, etc.
However, you can rename groups. Use / to highlight a group and use , to
change the name of your favorite channels. After entering a new name, press

BLUE to save the changes.
To edit a group, first highlight it using / and then select OK. A group can
be modified only if it has already channels assign. Select the channel that you
want to modify and press OK.
To move the channel in the order of the list, press the YELLOW button, and
then set it with / .
To remove a channel from the list, press the Blue button and confirm your
choice by selecting YES and clicking OK.
When you exit the menu after modifying the list, confirm your choice selecting YES, if you want to save the changes or select NO to discard them.

Delete all
Use this function to delete all channels. Select Delete all with / and press
OK. Select Yes to confirm your choice or NO to reject it.
The Delete all permanently removes all channels from the receiver and you
can not exit the menu mode without rescannig for channels.

4.3 Antenna instalation
Select Antenna Installation using the cursor keys and press OK to enter. In
this menu, there are advanced methods of installing the antenna and scanning for channels. They have been described in detail in the introduction in
Chapter 2. Installation (p. 8-19).

4.4 System settings
Select System Settings using the cursor keys and press OK to enter. Use
/ to highlight the selected submenu and press OK to enter it. Press EXIT or
MENU to return to the previous menu.

Receiver Information
Here you can find information on the model of the receiver and its software.

Upgrade by USB
The software and a channel list can be updated using a USB drive. First
upload the software file or a list to the drive.
Update mode

With / to select what you want to update.

Update file
Start

ith / select the file with the new software or a
W
list of channels.

Press OK to begin the update. NOTE! Do not
remove the USB drive during the update. Channel
list and favorites will be deleted and the settings
will be restored to default.

Save a backup copy of the program
In this menu you can save on a USB drive a software and the channel list as
backups.
The scope of data With / to select the type of data you want to save.
File
Start

Displays name of the file.

Press OK to start recording. NOTE! Do not remove the USB
drive while writing.

Video and audio settings
Using this menu, you can adjust the settings to the TV. The following options
that are available:

Resolution

With / switch between the values from 480i to 1080p.
Apply a resolution that fits your TV.

Format

se this feature to select the aspect ratio and the preferU
red method of conversion. Available options are: Auto
(automatic detection of aspect ratio), 4: 3 PS (widescreen
image shows the full 16: 9 to 4: 3 TV), 4: 3 LB (black bars
on top and below the picture) and 16: 9 (use this setting
for TVs 16: 9).

Exit Video

se this function to select how to connect to a TV. Select
U
CVBS or RGB.

Digital Audio
Output

hoose between PCM and Bitstream. If the connected
C
audio device does not have a Dolby Digital decoder, set
this to PCM, otherwise the Bitstream.

After making the changes, you will be asked to confirm them. Select YES if
you want to use them, or NO to discard them.

Display Settings
In this menu, you can adjust the display settings of the receiver, such as brightness, contrast, saturation, hue and sharpness. To change the value, select
it using / and use / to adapt it to your needs.

Time settings
In this menu, you can set your region and time zone. Select Settings Time
with / and press OK.

Region

With

GMT Usage

Set region, User or Off.

GMT Zone

T his function allows you to select the time zone and is
only available when GMT Usage is enabled. The range
is from GMT -11: 30 - 12: 00 and is increased by half an
hour. Cities located in the zone are displayed at the
bottom of the screen.

select your region.

Summer time

Select On to add an hour during daylight saving time.

Date

ate and Time settings are available when the option
D
GMT Usage is disabled. With 0-9 to enter the date.

Time

ate and Time settings are available when the option
D
GMT Usage is disabled. Use keys 0-9 to enter the time.

Parental lock
In this menu, you can protect access to the menu and/or channels with a
password. You can also set a new password. Use / to select Parental and
press OK. You will be prompted to enter the password. (Default password:
0000).
Menu lock

Locks the main menu. Set to Enable or Off.

Channel lock

hoose between: Enable or Off. When locked,
C
blocked channels will be available after entering a
password.

Age lock

Optional function. Choose between: Off, for 7 years,
12 years, 16 years, 18 years. Age-restricted channels
will be displayed only after entering the password
(depending on the broadcaster.)

New password

se the 0-9 buttons to enter your new password (4
U
digits).

Confirm password

Re-enter the password.

Language Settings
In this menu, you can set your language preference. Select Language settings with / and press OK.
Language set- W
ith / select the language for the menus and detings
scriptions of the functions displayed on the screen.
The first audio With
track

select language first audio track.

The second
audio track

With

select language other audio tracks.

Subtitle language

With / to select the language for teletext (if available).

Teletext

Use

to select language of the teletext (if available)

OSD Settings
In this menu, you can change the settings for the OSD, which is the menu and
other items displayed. Use / to select OSD Settings and press OK.
Display of
subtitles

Use the

Delay of OSD

Use the / to set the time after which the program
information on the screen disappear. The range of
functions is 1-10 seconds.

Transparency of
OSD

Use the /
(Off-40%).

Screen saver

Use the / to select whether you want the screen
saver to appear after prolonged inactivity while
using the menu.

Playback progress bar

With / select whether you want to see the playback progress bar: at the top or bottom of the screen.

to set display to Manual, Off or On.

to set the transparency of the menu

Extended channel With / enable or disable the extended list. In the
list (OK button)
expanded list, you can see a preview of the EPG, which
channels are encoded and recording.

EPG settings
Style of EPG

Use the / select schedule or newspaper view (for
a detailed description see p. 22.)

EPG channel
switching

T his option is available in newspaper view. When
switching to the detailed view of the EPG another
channel, the receiver starts playing. If this feature is
disabled, you can view the EPG for other channels
without switching to it.

EPG recording on Enable this feature if you want the EPG information
a USB drive
are stored on an external USB drive.
Clear the
contents of the
EPG buffer

Clear saved data on USB disk.

Others
Automatic power
off

With the / buttons switch between the values of
timing and Off. When this feature is enabled, the receiver turns off after the preset time since last use of
the remote control or the buttons on the unit. Disable
this feature to avoid automatic shutdown.

Clock on display

With the / buttons set the clock on or off. If you
set the clock to be displayed all the time, the receiver
does not go into the actual standby mode (not „turn
off”), during which the energy is saved. Despite the
off the TV will consume more electricity.

Alternate remote

With the / buttons enable or disable the ability
to support the receiver using an alternative remote
control.

Preview video in
the menu

With the / buttons enable or disable the video
preview, or to what is currently being played in the
menu.

Factory settings
This function allows you to reset the receiver to factory settings, erases all
settings made by the user and scanned channels. It restores the receiver to
the state it was right out of the box. Use / to select Default Settings and
press OK. Then confirm the action by selecting Yes.

4.5 Media player
Select Media player with the cursor keys and press OK to enter. Use / to
highlight the selected submenu and press OK to enter it. Press EXIT or MENU
to return to the previous menu.
This function allows you to play different files from a connected USB drive.

Your recordings
In the menu you record programs already recorded are displayed in white,
and scheduled (timer) in red.
Use the / buttons to highlight the selected recording and press OK to
start play. During playback, you can do the following:
Use (PAUSE) to stop playback.
Use (PLAY) to resume playback at normal speed.
Use
(FF) to play faster or
(REW) button to rewind. Press the button
as many times as you need to set the desired speed (x2, x4, x8, x16, x24).
Use (STOP) to stop playback and return to the list of recordings.
Use (SLOW) to slow down playback. Press the button as many times as
you need to set the desired speed (x1/2, x1/4, x1/8).
Use
(SKIP–)lub
(SKIP+) button to jump to the next or previous
track.

••
••
••
••
••
••

After playback, the unit will automatically return to the list of recordings. You
can manage the list of your recordings using the colored buttons:

rename

sing the red button, go to the window to rename the hiU
ghlighted record.

lock

sing the green button lock the recording so that watU
ching it would be possible only after entering the
password. (The default password is 0000)

delete

Remove unwanted recording.

add
recording

Plan your next video recording. A detailed guide to planning of the recording is located on page 26.

Your videos
In this menu, you can play movies stored on a USB drive.
Use the / buttons to highlight the selected recording and press OK to
start play. During playback, you can perform the same operations as described in the preceding paragraph of your recording.

Your photos
In this menu, you can view images stored on a USB drive.
Use the / buttons to highlight the selected image and press OK to start
to show.
Use the / buttons to switch to the next or previous image. Using / you
can rotate the image clockwise or counterclockwise.

Your music
In this menu, you can play music stored on a USB drive.
Use the / buttons to highlight the desired track and press OK to start to
play it.
During playback, you can perform the same operations as described in section above apart from the (SLOW) action.
Using the YELLOW button, you can set the repeat mode from the list on one
of the three: repeat, random, one after the other.

4.6 Network / APP
Select Network / APP using the cursor keys and press OK to enter. Use / , to
highlight the selected submenu and press OK to enter it.

Network Settings
Internet connection can be automatic – via DHCP or set manually. To set the
connection manually, set DHCP to Off. Then, using the number buttons on
the remote control, enter the IP address, subnet mask, default gateway, DNS
Primary and Alternate. Go to Confirm and press OK.

Wireless Network Settings
To connect to a wireless network, you must first equip it with a wireless network card. This is possible by connecting a Wi-Fi card via the USB port. After
connecting the adapter the receiver displays information about the device
is detected, scanning for networks and connecting. Available networks will
be displayed in the list. You can refresh this list using the RED button. To
connect to your network, highlight it with / and press OK. For a secure
network, enter the appropriate password. Type the password, moving around the virtual keyboard using the / and / and selecting characters by
pressing OK. You can select the function below, the „Show key” if you want
the entered password to be visible. After entering the correct password, the
receiver connects to a wireless Internet network.

Update over the Internet
In this menu, you can update the software of the receiver via the internet.
URL Press OK to enter the name of an Internet address, which will be installed updated software. If you do not know the proper address,
you will not be able to use this function. Type addresses moving on
the virtual keyboard using the / and / and selecting characters by pressing OK. Select the blue button to finish entering or go
to „Save” and press OK.
Start Start Press OK to begin the update. The receiver will start checking
the protocol. If you find software to download, start the update. You
can interrupt the download updates using the YELLOW button.

Internet Radio
When the receiver is connected to the internet you can play Internet radio stations. Internet Radio menu displays a list of available radio stations. To navigate through the list, use the / and OK to play. Some radio stations provide
a number of radio channels. Select the channel you want to listen to and
press OK. While listening to Internet radio, you can not use the buttons such
as (PAUSE), (PLAY),
(FF) etc.

Globo Remote
The Globo Remote allows you to remotely control the receiver via any device based on the Android operating system. This device must be in the same
local network as the receiver. Download the free app from the Google Play
store. To do this, scan the QR code appears, or search for an application called Remote GLOBO.

4.7 Access card
Select access card using the cursor keys and press OK to enter. Use / to
highlight the selected submenu and press OK to enter it. Press EXIT or MENU
to return to the previous menu.

Status subscription
In this menu, you can check the status of your subscription and the right to
receive the channels.

Change CA PIN
In this menu, you can change the PIN CA. First, enter the current PIN, and
then double-new PIN.

Parental control
In this menu, you can set the type of restrictions on the availability of programs. Use the / buttons to select an age limit and press OK. To make
changes to the CA must provide a valid PIN.

About Conax CA
Here you will find information about the card number and, optionally, other
additional information.

Messages
In this window, you can view the messages that your satellite TV provider can
send information on services and payments.

4.8 Disk Settings
Select the USB drive using the cursor keys and press OK to enter. Use / , to
highlight the selected submenu and press OK to enter it. Press EXIT or MENU
to return to the previous menu.

Information on USB drive
This menu displays the relevant information on the USB device. Select infor-

mation about the USB disk drive Settings menu and press OK.
You can check out what is the size of the drive and how much free space is
left on it. Additionally, you can format the disk, using the BLUE button. Confirm the action by selecting Yes.

Connect the USB as on the screen
Displays information about how to properly connect the USB drive to the receiver. The first is a USB input for additional devices such as a network adapter. While the other is used to connect the drive to record.

Recording Settings
In this menu, you can set the default method of recording.
Jump

With the / buttons switch between time-values (from 30 sec. To 30 min.) Over the scroll is used
during playback and time shift with the
(SKIP–)
or
(SKIP+),

default start of a
recording

S et the number of minutes before the start of the
program the receiver starts recording.

default end of
the recording

Set how many minutes after the end of the program
the receiver stops recording.

Do not show
the details in
the recording
window

Press OK to enable or disable the recording of detailed
planning available EPG view.

The default mode If you turn off the window showing the details of the
of recording
recording, you can set the default mode for the planned recording.

Safely remove USB drive
Use this function to safely eject the USB device before manually removing it
from the slot in the receiver. This will prevent the risk of data loss. Use / to
select Safely Remove USB drive and press OK.

Troubleshooting

There are various reasons for the malfunction of the receiver. After you apply the following tips, if the receiver still does not work properly, contact a
professional service. Do not open or disassemble the receiver. This can lead
to a dangerous situation and the warranty will be void.

Problem

Possible Cause

OPTICUM_XS65_HD_SAT_RECEIVER Ver. 01 001244042 An En OPTICUM XS65 HD SAT RECEIVER

Navigation menu

Versions of this User Manual:

Views

Navigation