Walk Behind Lawn Mower !! 01193900A
Preview ! 01193900A Briggs Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection
User Manual: !! Briggs Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection
Open the PDF directly: View PDF 
.
Page Count: 19
| Download | |
| Open PDF In Browser | View PDF |
Walk-Behind Lawn Mowers ® Parts Manual Models 911511 - LM21SC 911513 - LM21 911514 - LM21S 911515 - LM21SE 911516 - LM21SW 911522 - LM21SB 01193900A 6/01 Supercedes 01193900 Printed in USA THE MANUAL PRODUCT REGISTRATION Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps: 1. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two. 2. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. Hardware descriptions are given in decimals. Decimals to Fractions .063 1/16 .563 9/16 .125 1/8 .625 5/8 .188 3/16 .688 11/16 .250 1/4 .750 3/4 .313 5/16 .813 13/16 .375 3/8 .875 7/8 .438 7/16 .938 15/16 .500 1/2 1.00 1 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. • Record Unit Model and Serial numbers here: TO SPEED PARTS ORDERING: 1. 2. 3. 4. • Record Engine Model and Serial numbers here: UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts. 2 Know the model and serial numbers of your unit. Know the part number required. Know the quantity required. Know the part description. MODELS TABLE OF CONTENTS Model 911511 (LM21SC) 4 Cycle-Robin 6 HP Recoil, Self-Propelled, Commercial Serial No. 001472 and up DECALS Decals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 MAIN FRAME & ENGINE Model 911513 (LM21) 4 Cycle-Briggs & Stratton Intek OHV 6.5 HP Recoil, Push Serial No. 001524 and up Handlebar and Controls . . . . . . . . . . . . . . . . . . . . . . . 6 Mower Pan and Bag. . . . . . . . . . . . . . . . . . . . . . . . . . 8 Blade and Belt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Engine and Electrical . . . . . . . . . . . . . . . . . . . . . . . . 11 Model 911514 (LM21S) 4 Cycle-Briggs & Stratton Intek OHV 6.5 HP Recoil, Self-Propelled Serial No. 006618 and up WHEELS Swivel Wheels and Brackets . . . . . . . . . . . . . . . . . . 13 Wheels and Adjusters . . . . . . . . . . . . . . . . . . . . . . . 14 Friction Wheel and Adjusters . . . . . . . . . . . . . . . . . . 16 Model 911515 (LM21SE) 4 Cycle-Briggs & Stratton Intek OHV 6.5 HP Electric, Self-Propelled Serial No. 001696 and up ELECTRICAL Electrical and Continuity Diagram . . . . . . . . . . . . . . 18 Model 911516 (LM21SW) 4 Cycle-Briggs & Stratton Intek OHV 6.5 HP Recoil, Self-Propelled, Swivel Serial No. 005106 and up Model 911522 (LM21SB) 4 Cycle-Briggs & Stratton Intek OHV 6.5 HP Recoil, Self-Propelled Serial No. 000101 and up 3 © Copyright 2000, 2001 Ariens Company DECALS Model 911511, 513, 514, 515, 516, 522 9 1 DANGER / PELIGRO 11 10 TO AVOID SERIOUS INJURY OR DEATH • Read the operator's manual. • Keep children and others away from unit while operating. • Never direct discharge toward other people. Thrown objects can cause injury. • Do not operate mower unless guards are in operating position or entire bagger is attached. • Keep safety devices (guards, shields, switches, etc.) in place and working. • Go across slopes, not up and down. • Look down and behind before and while moving backward. POUR EVITER LES BLESSURES GRAVES OU LA MORT • Lire le manuel de l'utilisation. • Éloigner les enfants et toute autre personne pendant le fonctionnement de la machine. • Ne jamais décharger directement en direction de quelqu’un. Des particules projetées peuvent provoquer des blessures. • Ne pas utiliser la tondeuse sans garant et sans sac totalement attaché. • Maintenez toujours en place tous les elements de securite (protecteurs, interupteurs, etc.). • Tondez le long des pentes, jamais de haut en bas ou inversement. • Regardez derriere er sur les cotes lorsque vous reculez. 2 08086900 PARA EVITAR DAÑOS SERIOS O LA MUERTE • Leer el manual del operador. • Mantenga la unidad alejada de los niños u otras personas cuando esté en funcionamiento. • Nunca dirija la descarga hacia otras personas, a que los objetos lanzados pueden provocar lesiones. • No poner en funcionamiento la máquina a menos que las guardas estén en posición de funcionamiento o la embolsadora entera esté conectada. • Mantenga artefactos de seguridad (defensas, protectores, interruptores, etc.) en su lugar y trabajando. • Transversa pendientes, no subir ni bajar. • Mire hacia abajo y detras antes y durante retroceso. 07742400B 07761700B 6 3 7 4 Do not operate mower unless guards are in operating position or bagger is attached. DANGER KEEP HANDS and FEET AWAY 08 83 08 00 8 5 PM0044 4 DECALS Model 911511, 513, 514, 515, 516, 522 Item 1 2 3 4 5 Part No. 07760700 05227000 07739400 08088300 08087900 05230600 6 05226800 05225800 7 05226400 07756900 8 08088000 08088100 05230700 9 07742400 10 08086900 11 07761700 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Description Decal, Speed Control (511, 514-516, 522) Decal, Turtle & Rabbit (511, 514-516, 522) Label, Bagger 21" Decal, CPSC Danger Decal, Ariens Deck (511, 513-516) Decal, Ariens Blade Brake/Clutch (522) Decal, Round Ariens Recoil, Robin (511) Decal, Ariens Recoil, Briggs & Stratton (513-522) Decal, 6.0 H.P. OHV Robin (511) Decal, Ariens, Briggs & Stratton (513-516, 522) Decal, Drive Cover Self Propelled (514-516, 522) Decal, Drive Cover Self Propelled Professional (511) Decal, Blade Brake/Clutch Drive Cover (522) Decal, Bilingual Danger Decal, Key Switch (515) Decal, Engine Control 5 HANDLEBAR AND CONTROLS Model 911511, 513, 514, 515, 516, 522 911511, 513-516 911522 3 2 2 1 3 1 4 49 48 47 6 5 8 10 52 50 13 51 11 9 4 45 46 11 10 12 3 2 22 11 42 21 15 7 14 11 20 25 26 23 41 17 43 19 18 24 16 27 19 16 36 44 37 40 28 29 30 32 29 30 31 33 34 38 Item 1 2 3 4 5 6 Part No. 01177251 01191551 06437200 06437200 05514500 05514500 07517000 07517000 01177051 01184851 Qty. 1 1 4 3 4 3 2 1 1 1 36 39 Description Engine Bail Weldment (511, 513-516) Bail- Blade Brake/Clutch (522) Washer-Flat-Steel .32 x .44 x .44 x .56 (511, 513-516) Washer-Flat-Steel .32 x .44 x .44 x .56 (522) Bushing-Flange .325 x .688 x .560 (511, 513-516) Bushing-Flange .325 x .688 x .560 (522) Cap, Vinyl .25 I.D. (511, 513-516) Cap, Vinyl .25 I.D. (522) Traction Bail (511, 514-516, 522) Handlebar 6 35 PM0026 HANDLEBAR AND CONTROLS Model 911511, 513, 514, 515, 516, 522 Item 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 Part No. 06922000 06937900 01156400 01137551 06220100 06220100 06529700 06529700 07517300 06940100 06946400 01141851 01137451 01150051 01150151 01158651 01178700 05514900 06529800 06222300 06220600 07515900 01140800 06921200 06216100 01305900 06215700 06216100 06529600 06436200 06306500 01154800 06437300 06712400 01126100 01123900 01123800 01019800 01139800 06222200 06713500 01173800 06815700 06442700 05947000 06220000 06209300 06442300 06437300 06442700 07415800 06946500 06116800 06536600 01155751 Qty. 1 1 1 1 2 1 5 4 3 1 1 1 1 1 1 2 6 2 4 1 1 1 1 1 2 2 2 2 1 2 2 1 1 1 1 1 2 1 1 1 1 1 2 2 2 1 1 1 1 1 1 1 2 2 1 Description Engine Control Cable (513-516, 522) Engine Control Cable (511) Switch-Cable Anchor (515) Cable Anchor-Right Hand (511, 514-516, 522) Bolt-Round Head Square Neck .25-20 x 1.25 (511, 513-516) Bolt-Round Head Square Neck .25-20 x 1.25 (522) Nut-Locking-Center .25-20 (511, 513-516) Nut-Locking-Center .25-20 (522) Cable Tie Throttle Cable (511) Throttle Cable (522) Brace-Speed Control Bracket-Speed Control Link-Handlebar Adjuster Left Hand (513-516, 522) Link-Handlebar Adjuster Right Hand (513-516, 522) Handlebar Bracket (511) Washer-Bellville Spring (513-516, 522) Bushing-Flange .325 x .50 x .513 x .875 (513-516, 522) Nut-Locking-Center .31-18 Bolt-Round Head Square Neck .25-20 x 1.38 Bolt-Round Head Square Neck .25-20 x .50 Grade 5 Knob (511, 514-516, 522) Rod-Speed Control (511, 514-516, 522) Traction Cable (511, 514-516, 522) Bolt-Round Head Square Neck .31-18 x 1.00 Grade 5 (513-516, 522) Shoulder Spacer Bolt-Round Head Square Neck .31-18 x .75 Grade 5 (513-516, 522) Bolt-Round Head Square Neck .31-18 x 1.00 Grade 5 (511) Nut-Locking-Center .38-16 (511, 514-516, 522) Washer-Flat-Steel .406 x .812 x .065 (511, 514-516, 522) Washer-Lock .375 x .115 Heavy (511, 514-516, 522) Pressure Flange (511, 514-516, 522) Washer-Flat-Steel .281 x .620 x .065 (511, 514-516, 522) Pin-Cotter .06 x .50 (511, 514-516, 522) Shift Link (511, 514-516, 522) Bell Crank-Speed Control (511, 514-516, 522) Friction Washer (511, 514-516, 522) Cap, Rod .375 (511, 514-516, 522) Swivel (511, 514-516, 522) Bolt-Round Head Square Neck .38-16 x 1.25 (511, 514-516, 522) Pin-Hair-Internal .08 x .18 x 1.18 (511, 514-516, 522) Support Pad (511, 514-516, 522) Rivet .187 x .575 (511, 514-516, 522) Washer-Flat Steel .219 x .50 x .049 (511, 514-516, 522) Bolt-Hex .31-18 x .75 Grade 5 (511) Bolt-Round Head Square Neck .25-20 x 1.75 Grade 5 (511) Bolt-Round Head Square Neck .25-20 x 1.75 XL (522) Washer-Flat-Steel .250 x .562 x .049 (511) Washer-Flat-Steel .281 x .62 x .065 (522) Washer-Flat-Steel .219 x .50 x .049 (522) Screw-Tapping 10-24 x .50 Hex Washer Head (522) Control- Blade Brake/Clutch (522) Screw-Machine 10-24X2.00 Hex Washer Head (522) Nut-Hex 10-24 (522) Cable Anchor-Left Hand (511, 513-516, 522) 7 MOWER PAN AND BAG Model 911511, 513, 514, 515, 516, 517 1 2 37 38 39 8 3 14 10 5 11 20 7 36 12 19 4 16 17 21 18 6 10 13 22 9 15 35 24 33 23 32 31 34 25 26 27 30 28 29 PM0033 8 MOWER PAN AND BAG Model 911511, 513, 514, 515, 516, 522 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 Part No. 01194800 01138751 01136559 07516000 07511800 07411900 07414900 01159759 01177759 06203900 02215300 08322400 01141000 71102700 06530100 06219900 01155559 01138259 06439100 06308000 06533200 01159300 01158859 01155400 51108100 51108000 51107900 06222000 01183559 06529800 07507600 01173700 07415000 01180200 01180351 06436200 06530200 06214100 06514900 06530100 06538100 01178559 01178600 Qty. 1 1 1 1 2 4 2 1 1 2 2 1 1 1 2 2 1 1 1 2 2 1 1 2 1 1 1 2 1 2 3 1 3 1 1 2 2 2 2 4 2 1 1 Description Bag-ConsumerBlack Bagger Frame Door-Catcher Plate Button Bumper Bumper Screw-Tapping 12-24 x .50 Hex Washer Head (513-516, 522) Screw-Tapping 10-24 x .38 Pan Head Plate-Catcher (513-516, 522) Plate , Catcher (511) Bolt-Round Head Square Neck .25-20 x .38 Nut-Push Spring-Torsion .120 x .68 x 3.09 Pin-Door Mulch Master Mulcher Accessory Nut-Locking-Flange .25-20 Bolt-Round Head Square Neck .25-20 x .75 Grade 5 Hinge Base Weldment (511, 514-516, 522) Hinge Base (513) Washer-Flat-Steel .328 x .87 x .179 Washer-Locking .25 x .077 Nut-Hex .25-20 Nut-Wing (511, 514-516, 522) Drive Cover (511, 514-516, 522) Trim Bumper Mower Pan Head with Decals (511, 514-516) Mower Pan Head with Decals Push (513) Mower Pan Head Head with Decal Self Propelled Blade Brake/Clutch (522) Bolt-Round Head Square Neck .31-18 x .50 Grade 5 (511,513-515, 522) Front Panel (511, 513-515, 522) Nut-Locking-Center .31-18 (511, 513-515, 522) Grommet-Plastic Baffle-Center Screw-Tapping 10-16 x .62 Hex Washer Head Side Discharge Assembly Side Discharge Cover Washer-Flat-Steel .406 x .812 x .065 Nut-Locking-Nylon .312-18 Bolt-Round Head Square Neck .31-18 x .75 Grade 2 Nut-Push .312 Nut-Locking-Flange .250-20 (511) Nut-Wing #8-32 (515) Battery Plate (515) U-Bolt (515) 9 BLADE AND BELT Model 911511, 513, 514, 515, 516 1 12 2 3 6 4 5 7 15 11 8 13 9 14 10 PM0141 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Part No. 07217100 05963800 07313300 06529800 06436700 01142000 01141200 05515400 05947000 06536400 08321100 01137051 06308800 05976600 06441700 Qty. 1 1 1 4 1 1 1 1 1 1 1 1 1 1 1 Description V-Belt 3L Section (511, 514-516) Bolt-Hex .44-14 x 1.25 Grade 5 (511, 514-516) Idler-Flat 1.75 x .47 (511, 514-516) Nut-Locking-Center .31 -18 (511, 514-516) Washer-Flat-Steel .323 x .625 x .062 (511, 514-516) Spacer .52 x .45 x .34 (511, 514-516) Idler Arm (511, 514-516) Bushing-Flange .325 x .501 x .250 x 1.120 (511, 514-516) Bolt-Hex .31-18 x .75 Grade 5 (511, 514-516, 522) Nut-Locking-Center .44-14 (511, 514-516) Spring, Tension .043 x .44 x 3.31 (511, 514-516) Blade, 21" Mower Washer-Locking .38 x .094 Bolt-Hex .38-24 x 2.00 Grade 8 Washer-Flat Steel .390 x 1.50 x .125 10 ENGINE AND ELECTRICAL Model 911511, 513, 514, 515, 516 1 6 9 8 3 4 7 2 5 Robin Engine 16 14 14 18 10 15 15 17 17 Briggs & Stratton Engine 12 11 13 13 13 Item 1 2 3 4 5 6 7 8 9 10* 11 12 13 14 15 16 17 18 Part No. 02460700 07517700 06517300 06306900 01190600 01190700 01178400 01126000 01157100 08247700 08258800 08245800 01178100 01121700 06600900 06600900 07414100 06529800 06435800 06307400 05947500 05947000 Qty. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 3 2 4 1 2 1 Description Key with Cap (515) Cap-Ignition Switch (515) Nut, Panel .625-32 (515) Washer-Locking Internal .625 x .045 (515) Switch, Key Electric Start-LM (515) Harness, Wire LM-Electric (515) Battery (515) Battery Charger (515) Recoil Start Handle Engine, Robin 6 HP 4 Cycle (511) Engine, Briggs & Stratton Intek OHV 6.5HP Recoil (513, 514, 516) Engine, Briggs & Stratton Intek OHV 6.5HP Electric Start (515) Adapter, Blade .875 Dia with Keyway (513-516) Adapter, Blade (511) Key-Woodruff .156 x .625 x .25 SAE #6 (513-516) Key-Woodruff .156 x .625 x .25 SAE #6 (511) Screw-Tapping .38-16 x 1.00 Hex Washer Head (513-516) Nut-Locking-Center .31-18 (511) Washer-Flat-Steel .312 x .734 x .065 (511) Washer-Locking .312 x .097 Heavy (511) Bolt-Hex .31-18 x 1.25 Grade 5 (511) Bolt-Hex .31-18 x .75 Grade 5 (511) 11 PM0133 ENGINE-BBC Model 911522 25 6 7 11 1 10 2 3 5 12 10 14 13 15 16 8 9 4 21 17 23 18 20 22 24 19 PM0451 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Part No. 01192159 01192200 08336400 07063100 01192900 01157100 08262700 01191600 07414100 06600900 07217100 05962800 07313300 06529800 06436700 05533300 01141200 05515400 05947000 06536400 08321100 01195500 06309300 05943000 01177100 Qty. 1 1 1 1 1 1 1 1 3 2 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 Description Bracket- Spring Retainer Pulley- Blade Brake/Clutch Spring-Tension .1278 x .735 x 4.71 Screw-Socket Head-Special .375-24 x 1.50 Washer-Wave .88 x 1.31 x .125 Recoil Start Handle Engine, Briggs & Stratton Intek OHV 6.5HP Recoil Blade Brake Clutch Screw-Tapping .38-16 x 1.00 Hex Washer Head Key-Woodruff .156 x .625 x .25 V-Belt 3L Section Bolt-Hex .44-14 x 1.50 Grade 5 Idler-Flat 1.75 x .47 Nut-Locking-Center .31 -18 Washer-Flat-Steel .323 x .625 x .062 Bushing-Sleeve .469 x .750 x .430 Idler Arm Bushing-Flange .325 x .501 x .250 x 1.120 Bolt-Hex .31-18 x .75 Grade 5 Nut-Locking-Center .44-14 Spring, Tension .043 x .44 x 3.31 Blade- Blade Brake/Clutch Washer-Locking .44 x .109 Regular Bolt-Hex M10 x 1.5 x 25 Rope Stop 12 SWIVEL WHEELS AND BRACKETS Model 911516 5 2 4 1 12 3 7 9 6 10 8 13 11 14 PM0073 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part No. 05708300 06436100 01185257 01189557 06814600 06222000 06530400 07012600 01169357 01190800 01168100 01168300 01169200 07149900 07152400 05502100 Qty. 2 2 1 1 2 6 6 2 2 2 2 2 2 2 2 2 Description Ring-Retaining-External .625 x .042 Washer-Flat-Steels .630 x 1.005 x .062 Mount with Bushing, Right Arm Mount with Bushing, Left Arm Pin-Clevis .25 x 1.75 Bolt-Round Head Square Neck .31-18 x .50 Grade 5 Nut-Hex .312-18 Fitting-Lube .25-28 x .256 Wheel Yoke Weldment Pin, Bowtie Cotter Axle Tab Pin-Clevis .494 x 2.62 Ring-Kickout Wheel Tire 7 x 1.50 Bushing-Flange .500 x .500 x .750 13 WHEELS AND ADJUSTERS Model 911511, 513, 514, 515, 516, 522 10 1 3 2 11 18 7 4 29 8 9 5 30 16 31 9 12 6 15 13 17 19 14 28 4 19 27 24 26 9 23 25 22 6 21 20 21 9 32 33 12 PM0065 Item 1 2 3 4 5 6 7 Part No. Qty. 07522300 1 07522400 1 06712400 3 01140000 1 07513600 4 01130600 2 06212200 9 06212200 13 06529600 2 Description Rear Protective Guard, Self Propelled (511, 514-516, 522) Rear Protective Guard, Push (513) Pin-Cotter .06 x .50 Rod Knob Height Adjustment Lever Bolt-Round Head Square Short Neck .31-18 x .62 (513-515, 522) Bolt-Round Head Square Short Neck .31-18 x .62 (511) Nut-Locking-Center .38-16 14 WHEELS AND ADJUSTERS Model 911511, 513, 514, 515, 516, 522 Item 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Part No. Qty. 01167100 2 06529800 8 06529800 12 01149500 1 01171900 1 06221800 1 05710200 4 05710200 2 06436600 2 07151200 1 07151500 1 07103900 2 07152500 2 01149600 2 01149700 1 01149800 1 05514800 2 01154251 1 01154351 1 01137251 1 01137151 1 01177451 1 01177551 1 06530400 10 07149900 2 07152400 2 06441100 6 05946900 2 05514800 2 01120000 2 01119800 1 01119900 1 01168900 1 01154051 1 01154151 1 06222000 4 06530200 1 01130700 1 01150400 1 01131300 1 01131200 1 01130800 1 01158200 1 05417600 1 01156051 1 06436600 2 Description Handlebar Stud Nut-Locking-Center .31-18 (513-515, 522) Nut-Locking-Center .31-18 (511) Rear Axle (511, 514-516, 522) Rear Axle Push Mower (513) Bolt-Round Head Square Short Neck .31-18 x 1.00 Ring-Retaining-External .500 x .042 Ring-Retaining-External .500 x .042 (516) Washer-Flat-Steel .505 x .880 x .072 Wheel, Left Hand Rear (511, 514-516, 522) Wheel, Right Hand Rear (511, 514-516, 522) Tire Skin 10 x 2.0 (511, 514-516, 522) Tire 10 x 1.75 (513) Spacer Tube (511, 514-516, 522) Spacer Tube-Push Left Hand (513) Spacer Tube-Push Right Hand (513) Bushing-Flange .312 x .500 x .344 x .880 Rear Quadrant-Left Hand Rear Quadrant-Right Hand Bracket-Handlebar Mounting-Right Hand (513-516, 522) Bracket-Handlebar Mounting-Left Hand (513-516, 522) Bracket-Handlebar Mounting-Right Hand (511) Bracket-Handlebar Mounting-Left Hand (511) Nut-Locking-Flanged .31-18 (511, 513-515, 522) Wheel-Front (511, 514-516, 522) Tire 7 x 1.50 (513) Washer-Flat-Steel .520 x .827 x .062 (511, 513-515, 522) Bolt-Hex .31-18 x 1.00 Grade 5 (511, 513-515, 522) Bushing-Flange .312 x .500 x .344 x .880 (511, 513-515, 522) Lever, Front Height Adjustment (511, 513-515, 522) Left Hand Bracket Assembly Right Hand Bracket Assembly Front Axle (511, 513-515, 522) Front Quadrant, Left Hand (511, 513-515, 522) Front Quadrant, Right Hand (511, 513-515, 522) Bolt-Round Head Square Neck .31-18 x .50 Grade 5 (511, 513-515, 522) Nut-Locking-Nylon .31-18 Rear Adjuster Bracket-Left Hand (514-516, 522) Rear Bracket and Bearing Assembly (514-516, 522) Rear Bracket and Bearing Assembly-Right Hand (513) Rear Bracket and Bearing Assembly-Left Hand (513) Rear Adjuster Bracket-Right Hand (511) Rear Adjuster Bracket-Left Hand (511) Bearing-Ball .625 x 1.383 x .50 (511) De-Thatcher Retainer Weldment (511) Washer-Flat-Steel .505 x .880 x .072 (511, 513-515, 522) 15 FRICTION WHEEL AND DRIVE Model 911511, 514, 515, 516, 522 10 5 6 8 43 2 56 2 7 3 9 4 11 1 4 12 13 15 14 46 52 56 53 16 51 48 49 18 55 26 21 54 19 22 29 50 47 17 13 3 27 32 33 31 45 34 44 35 28 25 23 20 24 30 36 37 39 40 38 38 41 46 Item 1 2 3 4 5 6 7* 8 9 10 11* Part No. 01121051 05705900 07411900 06441100 06425300 01131700 05408000 01135100 01139700 51102400 05417600 Qty. 1 2 5 2 1 1 1 1 1 1 2 42 PM0080 Description Gear Cover Ring-Retaining-External .438 x .035 Screw-Tapping 12-24 x .50 Hex Washer Head Washer - Flat - Steel .520 x .827 x .062 Washer - Flat - Steel .531 x 1.00 x .063 Idler Gear Bearing - Ball .50 x 1.38 x .437 Retainer Idler Shaft Differential Assembly Bearing-Ball .625 x 1.383 x .50 (511) 16 FRICTION WHEEL AND DRIVE Model 911511, 514, 515, 516, 522 Item 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 Part No. 02201100 05413700 01140600 08325200 01137900 01161951 06529800 06437200 06212200 01125100 06421600 02215300 05803500 05804800 01124200 01123600 01125000 01125700 05800500 01153800 07412100 01153900 51102500 06529200 06307400 06439400 01127300 05435100 06420200 01127400 01127500 06220200 05711900 01190400 01149200 07411900 07411900 05947900 03240700 01133500 06529700 01132700 01131800 05416000 01119200 05706200 07012600 Qty. 1 2 1 1 1 1 2 2 2 1 1 2 2 2 2 1 1 1 2 2 4 1 1 1 1 1 1 2 1 1 1 1 2 1 1 4 8 3 1 1 3 1 1 1 1 1 2 Description Gear-Pinion Bearing - Ball .562 x 1.375 x .437 Drive Mount Spring-Tension .051 x .60 x 2.25 Drive Actuator Weldment Pivot Channel Weldment Nut-Locking-Center .31-18 Washer-Flat-Steel .344 x .688 x .065 Bolt-Round Head Square Short Neck .31-18 x .62 Rod-Guide Washer - Flat - Steel 1.390 x 2.00 x .020 Push Nut .25 Pin-Roll .125 x .50 (514-516, 522) Pin-Roll .125 x .63 (511) Shift Link Shift Arm Weldment Retainer Plate Hex Shaft Pin - Roll .188 x .88 Thrust Plate (514-516, 522) Screw-Tapping 10-24 x .375 Hex Washer Head (514-516, 522) Guide-Plate (514-516, 522) Friction Wheel Assembly (514-516, 522) Nut-Hex .31-18 Washer-Locking .312 x .097 Heavy Washer Flat-Steel .328 x .875 x .062 Friction Sheave Bearing-Ball .625 x 1.375 x .43 Washer- Flat-Steel 1.062 x 1.344 x .032 Spindle, Bearing Bearing, Retainer Bolt-Round Head Square Neck .31-18 x 1.75 Grade 5 Ring-Retaining-External .579 x .930 Friction Ring (514-516, 522) Friction Wheel Hub (514-516, 522) Screw-Tapping 12-24 x .50 Hex Washer Head (514-516, 522) Screw-Tapping 12-24 x .50 Hex Washer Head (511) Bolt-Hex .25-20 x .50 Grade 5 (511) Disc, Friction (511) Hub, Friction Wheel (511)) Nut-Locking-Center .25-20 (511) Bearing Plate (511) Bearing Retainer (511) Bearing Ball 1.00 x 2.00 x .56 (511)) Bearing Retainer (511) Ring-Retaining - External 1.00 x .042 (511)) Fitting-Lube .25-28 x .256 (511) * Available as individual components or part of 51105600 Service Kit which consists of (2) 05435100, (1) 05408000, (2) 05413700 and (2) 05417600. 17 ELECTRICAL AND CONTINUITY DIAGRAM Model 911522 KEY SWITCH ENGINE STARTER S 1 1 2 2 3 3 4 4 BROWN B BLACK RED RED RED A B 3 AMP BATTERY BLACK BLACK PM0470 The diagram below shows the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Key Switch (01190600) S OFF POSITION B S START POSITION B PM0480 18 Ariens Company 655 West Ryan Street P.O. Box 157 Brillion, WI 54110-0157 920-756-2141 Fax 920-756-2407 www.ariens.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Producer : Acrobat Distiller 4.05 for Macintosh Title : Walk Behind Lawn Mower Creator : FrameMaker 6.0 Author : Ariens Technical Publications Modify Date : 2001:06:21 14:29:26-05:00 Create Date : 2001:06:21 11:08:56 Page Count : 19 Page Layout : TwoColumnRightEXIF Metadata provided by EXIF.tools