01 Plastic Part Summary Insert Instructions
01_Plastic_Part_Summary_Insert_Instructions
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
PP-GP0222 -- Y belt mount v.75 2xHD-MS0030 M3 inserts 4xPP-MP0066 M2 inserts PP-GP0208 -- Extruder Mount TAZ6 v0.8 5xHD-MS0030 M3 inserts Direction of insertion shown PP-GP0213 -- Z Carriage Motor, v2.3 2xHD-MS0158 M5 Short Inserts 4xPP-MP0066 M2 inserts 2xHD-MS0030 M3 inserts Taz 6 Inserts 1 of 7 PP-GP0211 -- Fan duct left v0.7.4 PP-GP0212 -- Fan duct right v0.7.4 2xHD-MS0030 M3 inserts Approved 2xHD-MS0030 M3 inserts Approved 2xPP-MP0066 M2 inserts PP-GP0206 -- X-Carriage TAZ v0.3 PP-GP0232 -- Heatsink Fan Duct v0.6 15xHD-MS0030 M3 inserts 4xHD-MS0030 M3 inserts 2 in clamp 8 top side 5 PEI side PP-GP0215 -- Z Lower Left v2.3 PP-GP0227 – Z Lower Right v2.3 1xHD-MS0030 M3 inserts (Around the back side of the part) Taz 6 Inserts 1xHD-MS0030 M3 inserts 2 of 7 PP-GP0218 -- Feed Tube Holder v2.5 PP-GP0217 -- Spool Arm v2.0, TAZ 1xM5 bushing 1xM5 bushing PP-GP0228 – Y Corner Left v2.4 PP-GP0229 – Y Corner Right v2.4 1xHD-MS0060 M5 Long 1xHD-MS0060 M5 Long 2xHD-MS0030 M3 inserts 2xHD-MS0030 M3 inserts Print side of part is the outward face of the part Print side of part is the outward face of the part PP-GP0226 – Y Motor Mount v3.0, TAZ PP-GP0214 -- Z Carriage Idler v2.3 2xHD-MS0158 M5 Short 4xHD-MS0030 M3 inserts Direction of insertion shown PP-GP0225 -- Y Idler Mount v4.0, TAZ 2xHD-MS0030 M3 inserts PP-GP0223 -- Y Mount Chassis v3.3 1xHD-MS0060 M5 Long Insert 4x-HD-MS0030 M3 inserts Direction of insertion shown Taz 6 Inserts Push insert slightly below flush to counterbore Direction of insertion shown 3 of 7 PP-GP0224 -- Y mount table v2.5, TAZ PP-GP0186 -- Wade extruder body for Hex nozzle v1.0 No Inserts PP-GP0221 -- Bed corner ninjaflex v1.0, TAZ No Inserts PP-GP0216 -- Z-min switch mount v0.4, TAZ No Inserts PP-GP0234 – LCD Knob, V1.0 No Inserts PP-GP0233 – Bearing Holder Printing, V1.0 No Inserts Taz 6 non-inserts No Inserts 4 of 7 PP-GP0210 -- Single Bearing Holder for 12mm rod v0.3 PP-GP0209 -- Double Bearing Holder for 12mm rod v0.3 No Inserts PP-GP0231 – Wiper Mount, v2.0 No Inserts PP-GP0091 -- extruder_latch No Inserts PP-GP0192 – Herringbone Small Gear v1.1, Lulzbot green No Inserts PP-GP0191 – Herringbone Large Gear v1.3, Lulzbot green No Inserts Taz 6 non-inserts No Inserts 5 of 7 PP-GP0193 – Extruder Idler Block v1.4c, Taz & Mini PP-GP0060 -- Wade Reloaded Bearing Washer No Inserts PP-GP0219 -- Feed Tube Spinner v2.5 No Inserts PP-GP0236 -- Z Upper v2.0, TAZ6 No Inserts PP-GP0235 – SD card bezel, TAZ 6, v0.7 No Inserts PP-GP0230 – Printed_LCD_bezel, TAZ 6, v1.0 No Inserts Taz 6 non-inserts No Inserts 6 of 7 PP-GP0154 -- Electronics Case Mount v1.0 PP-GP0220 -- Interconnect housing v0.1, TAZ No Inserts PP-GP0207 -- X-Carriage Guidev2.0, TAZ approved, need Pic No Inserts PP-GP0089 – LCD Spacer, TAZ No Inserts PP-GP0237 – Flexy Washer V0.1 approved, need Pic No Inserts PP-GP0238 – Flexy Bed Foot v0.1 No Inserts Taz 6 non-inserts No Inserts 7 of 7
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 7 Author : Aleph User Creator : Calc Producer : LibreOffice 5.0 Create Date : 2016:04:05 18:30:00-06:00EXIF Metadata provided by EXIF.tools