Aviom AllFrame F6 Power Requirements Modular I/O Frame Options 132
Aviom F6 Modular I/O Frame Power Options 132_F6-Power-Requirements Aviom - F6 Modular I/O Frame - Power Options
Aviom F6 Modular I/O Frame Power Options 132_f6-power-requirements Aviom - F6 Modular I/O Frame - Power Options
User Manual: Aviom F6 Modular I/O Frame Power Options Aviom - F6 Modular I/O Frame - Power Options
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
ALLFRAME ™ Multi-Modular I/O System F6 Power Supply Requirements & Options Aviom’s AllFrame Multi-Modular I/O System offers unique flexibility in installation. In addition to supporting multiple I/O complements and physical form factors, AllFrame devices can be powered in a number of ways. This paper details the electrical requirements that must be met by any power supplies used with AllFrame devices and provides critical guidelines for ensuring proper performance. Power Connector options The F6 Modular I/O Frame features three power inlets: a two-pin Euroblock and a four-pin XLR for use with external DC power supplies, as well as an RJ-45 A-Net® jack which can accept power injected on the Cat-5e cable. Power Supply options The F6 does not ship with a power supply. Third-party power supplies purchased for use with the F6 may be benchtop models, DIN rail supplies, or in-line bricks, as long as the minimum electrical specifications are met. In order to prevent the F6’s case from sitting above ground due to voltage drop on the cable, a separate power supply must be used to power each F6 in a system. Power supplies must be installed in accordance with the manufacturer’s instructions and adhering to all local electrical codes. Aviom has tested and approved the TDK-Lambda DPP120-48-1 and Mean Well DR-120-48 DIN rail power supplies. All three power sources may be used simultaneously with the F6 to create a redundant power sub-system. Power over A-Net Because the power requirements of the F6 exceed standard PoE and PoE+, standard PoE/PoE+ power injectors are not suitable for use in AllFrame systems. Users who wish to power AllFrame units through the RJ45 jack must purchase the Aviom POA80 Power Over A-Net power supply assembly. No other power supplies have been approved for powering AllFrame units in this manner. While the POA80 provides certain protections against power irregularities that are common when cables are connected or disconnected, Aviom recommends against plugging or unplugging a network cable utilizing Power Over A-Net while the POA80 is on. Note that only the A-Net B port can accept PoA and no other A-Net ports should be connected to the powered port of the POA80. The B port on the F6 may be used to supply power but not network data if the installation layout so requires. continued... 1157 Phoenixville Pike, Suite 201 • West Chester, PA 19380 Voice: +1 610.738.9005 • Fax: +1 610.738.9950 • www.Aviom.com ALLFRAME ™ Multi-Modular I/O System power via xlr or euroblock DC Power supplies used with the F6 and connected to the Euroblock terminal connector or the 4-pin XLR jack must meet the following requirements: Power Supply Rating Requires a UL60950-1 Certified/Listed ITE power supply having a SELV (Safety Extra Low Voltage) rated output voltage between 30 and 60V DC Voltage (measured at the input of the F6 Modular I/O Frame) 30-60VDC, inclusive of tolerance Maximum Current (varies with input voltage) (voltage at the input of the F6 Modular I/O Frame) 1.08A @ 60VDC 1.16A @ 56VDC 1.35A @ 48VDC 1.41A @ 44VDC 2.70A @ 24VDC 2.95A @ 22VDC In order to meet emissions standards, an inline filter such as the Cosel NAC-10-472, may be required for installations that use external switching power supplies. For proper filtering, the power supply and filter should be separated by twelve inches or more. Cable Length & Voltage Drop Maximum usable lengths for DC power cables used with the F6 and connected to the 4-pin XLR or Euroblock terminal block connectors will vary based on the gauge of the wire and the voltage and power rating of the supply. The cable will dissipate some of the power as heat, resulting in a voltage drop on the cable that increases with cable length. The table below presents power cable length as a function of wire gauge and supply voltage/power rating. Maximum Cable Distance For Various Power Supplies Wire Gauge 24V, +/-5% @ 100 Watts 48V, +/-5% @ 100 Watts 48V, +/-5% @ 120 Watts 12 75 feet, 23 meters 900 feet, 274 meters 1800 feet, 548.5 meters 14 48 feet, 15 meters 550 feet, 168 meters 1150 feet, 350.5 meters 16 30 feet, 9 meters 450 feet, 137 meters 725 feet, 221 meters 18 18 feet, 5.5 meters 300 feet, 91.5 meters 450 feet, 137 meters Power Dissipation Of Cable 2.4 Watts 8 Watts 20 Watts Connector Specifications Connector Type Pinout 2-pin terminal block Pin 1: 30-60VDC (+) Pin 2: Ground (-) 4-pin XLR Pin 1: Ground Pin 2/3: No Connect Pin 4: 30-60VDC Terminal Blocks Phoenix Contact part number 17 54 44 9 Size: 5mm; 2 contacts per unit Refer to the F6 User Guide for complete requirements and safety warnings. All Aviom products are designed and manufactured in the USA. Aviom, A‑Net, the A‑Net icon, Pro16, Pro64, Virtual Data Cables, m-control, and AllFrame are trademarks of Aviom, Inc. All other trademarks are the property of their respective owners. ©2012 Aviom, Inc. All rights reserved. Information subject to change without notice. rev. 1.3 072012
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Tagged PDF : Yes Page Mode : UseThumbs XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Instance ID : uuid:46c59b8d-1550-4099-bd51-737069730e6c Document ID : adobe:docid:indd:f24e6745-d26b-11e1-9b51-8b9544a5cd69 Rendition Class : proof:pdf Derived From Instance ID : aa6be4d4-3d58-11e1-85fc-e4466217f432 Derived From Document ID : adobe:docid:indd:aa6be4d0-3d58-11e1-85fc-e4466217f432 Manifest Link Form : ReferenceStream, DirectStream Manifest Placed X Resolution : 300.00, 72.00 Manifest Placed Y Resolution : 300.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches Manifest Reference Instance ID : uuid:0A262BFA7340E111B5EAEBB64D99BE68, uuid:abe72a69-18f9-4b85-94f5-4f9e33d363cf Manifest Reference Document ID : uuid:09A4965F5440E111B5EAEBB64D99BE68, uuid:772387BF70EFDA11B95D92B81AD2F696 Create Date : 2012:07:20 10:45:24-04:00 Modify Date : 2012:07:20 10:59:13-04:00 Metadata Date : 2012:07:20 10:59:13-04:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 9690 bytes, use -b option to extract) Format : application/pdf Title : Aviom AllFrame F6 Power Requirements Creator : Aviom, Inc. Subject : digital snake, digital multicore, digital snakes, audio network, networked audio, audio networking, pro64, a-net, audio over cat-5, audio over fiber, virtual data cable, gpio, rs-232, rs-422, word clock, audio distribution, midi, db25, remote control, allframe, modular IO, multi-modular, m-control, mcontrol, allframe, multi-modular, network manager, power supply, euroblock Producer : Adobe PDF Library 8.0 Trapped : False Keywords : digital snake, digital multicore, digital snakes, audio network, networked audio, audio networking, pro64, a-net, audio over cat-5, audio over fiber, virtual data cable, gpio, rs-232, rs-422, word clock, audio distribution, midi, db25, remote control, allframe, modular IO, multi-modular, m-control, mcontrol, allframe, multi-modular, network manager, power supply, euroblock Page Count : 2 Page Layout : SinglePage Author : Aviom, Inc.EXIF Metadata provided by EXIF.tools