Apex Fastener Tools Catalog (English) TX 10 1673891
User Manual: TX-10
Open the PDF directly: View PDF .
Page Count: 182
Download | ![]() |
Open PDF In Browser | View PDF |
CooperTools Apex ® TC-100 1201 30M W FASTENER TOOLS Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . .iv Bits Phillips . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Slotted . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Torx® . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Torx Plus® . . . . . . . . . . . . . . . . . . . . . . . .25 Pozidriv® . . . . . . . . . . . . . . . . . . . . . . . . .26 Sel-O-Fit® . . . . . . . . . . . . . . . . . . . . . . . . .29 Frearson . . . . . . . . . . . . . . . . . . . . . . . . .30 B.N.A.E. . . . . . . . . . . . . . . . . . . . . . . . . . .31 Socket Head . . . . . . . . . . . . . . . . . . . . . .32 Square Recess . . . . . . . . . . . . . . . . . . . . .41 Clutch Head . . . . . . . . . . . . . . . . . . . . . . .42 Pipe Plug Inserts . . . . . . . . . . . . . . . . . . .42 Torq-Set® . . . . . . . . . . . . . . . . . . . . . . . . .43 Tri-Wing® . . . . . . . . . . . . . . . . . . . . . . . . .46 Hi-Torque® . . . . . . . . . . . . . . . . . . . . . . . .48 Triple Square . . . . . . . . . . . . . . . . . . . . . .49 Bit Holders Hex Drive . . . . . . . . . . . . . . . . . . . . . . . .52 Female Square Drive . . . . . . . . . . . . . . . .55 Hand Drivers Replaceable Bit . . . . . . . . . . . . . . . . . . . .57 Torx® Keys . . . . . . . . . . . . . . . . . . . . . . . .58 Torx® and Torq-Set® Hand Drivers . . . . . . .59 Awls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Pivex™ . . . . . . . . . . . . . . . . . . . . . . . . . . .59 Hex Drive Nutsetters, Extensions & Universal Wrenches Nutsetters . . . . . . . . . . . . . . . . . . . . . . . .60 Extensions . . . . . . . . . . . . . . . . . . . . . . . .64 Universal Wrenches . . . . . . . . . . . . . . . . .68 1/4” Drive Sockets, Extensions, Adapters & Universal Wrenches SAE Sockets and Universal Wrenches . . .77 Metric Sockets and Universal Wrenches .81 Spline and Torx® Sockets . . . . . . . . . . . . .83 Extensions and Adapters . . . . . . . . . . . . .85 3/8” Drive Sockets, Extensions, Adapters & Universal Wrenches SAE Sockets & Universal Wrenches . . . . .86 Metric Sockets & Universal Wrenches . . .95 Spline & Torx® Sockets . . . . . . . . . . . . . .102 Extensions & Adapters . . . . . . . . . . . . . .103 1/2” Drive Sockets, Extensions, Adapters & Universal Wrenches SAE Sockets & Universal Wrenches . . . .105 Metric Sockets & Universal Wrenches . .116 Spline & Torx® Sockets . . . . . . . . . . . . . .125 Extensions & Adapters . . . . . . . . . . . . . .126 5/8” Drive Sockets, Extensions, Adapters & Universal Wrenches SAE Sockets, Universal Wrenches & Budd Wheel Sockets . . . . . . . . . . . . . . .128 Metric Sockets . . . . . . . . . . . . . . . . . . . .131 Extensions & Adapters . . . . . . . . . . . . . .131 3/4” Drive Sockets, Extensions, Adapters & Universal Wrenches SAE Sockets, Universal Wrenches & Budd Wheel Sockets . . . . . . . . . . . . . . .133 Metric Sockets . . . . . . . . . . . . . . . . . . . .137 Spline Sockets, Extensions & Adapters .138 1” Drive Sockets, Extensions & Adapters SAE Sockets & Budd Wheel Sockets . . .140 Metric Sockets . . . . . . . . . . . . . . . . . . . .144 Spline Sockets, Extensions & Adapters .145 1 1/2” Drive SAE Sockets & Adapters . . . . . . . . . . . . . . .147 2 1/2” Drive SAE Sockets & Adapters . . . . . . . . . . . . . . .148 Special Sockets, Adapters & Accessories Reversible Sockets . . . . . . . . . . . . . . . .151 Tap Holding Sockets . . . . . . . . . . . . . . .152 Grease Fitting Sockets . . . . . . . . . . . . . .153 Drill Holders . . . . . . . . . . . . . . . . . . . . . .154 #5 (1 5/8”) Spline Drive Sockets, Extensions, Adapters,Registered Universal Wrenches & Budd Wheel Sockets . . . . . . . . . . . .155 Socket Retaining Rings . . . . . . . . . . . . .156 Adapters . . . . . . . . . . . . . . . . . . . . . . . .157 Part Number Index . . . . . . . . . . . . . . . . .161 Quotation Worksheets . . . . . . . . . . . . . .169 Conversion Chart . . . . . . . . . . . . . . . . .172 Registered trademarks: Pozidriv, Torq-Set, and Tri-Wing, Phillips Screw Co.; Apex, Sel-O-Fit, Copper Industries, Inc.; Hi-Torque, Voi-Shan; Torx and Torx Plus, Camcar Div. of Textron. Quick Reference Bits 1 – 50 Bit Holders 51 – 56 Hand Drivers 57 – 59 Hex Drive Nutsetters, Extensions & Universal Wrenches 60 – 73 1/4" Sockets, Extensions, Adapters & Universal Wrenches 74 – 85 3/8" Sockets, Extensions, Adapters & Universal Wrenches 86 – 104 1/2" Sockets, Extensions, Adapters & Universal Wrenches 105 – 127 5/8"–2 1/2" Sockets, Extensions, Adapters & Universal Wrenches 128 – 148 Special Sockets, Adapters & Accessories 149 – 160 Part Number Index 161 – 168 iii The Apex heritage of quality, delivery and support. For more than half a century… Apex has maintained a position of leadership in industrial fastening tools. Today, Apex stands ready to improve the productivity of assembly operations around the world with unsurpassed tool performance and customer service. Here’s how: Highest Quality Apex quality begins with select raw materials. Only carefully chosen, high grade tool steel is used. Each tool is precision machined from solid bar stock to close-tolerance standards. You get an exact, sure fit – a fit not possible from tools made in a process that grows less precise with every stamp. Finally, each tool is tempered with the exclusive Apex heat treating process that lets you select the degree of hardness you require. Choose from tough, non-brittle durability that stands up to torque, to the hardest heat treat available for the ultimate in wear resistance. Rapid Select Means Fast Delivery Models indicated with a Rapid Select icon represent our most popular tools, and are available for fast delivery on limited quantities. On bit items, the heat treat code has been added to Rapid Select part numbers. See page vi for selecting the proper heat treat. Complete Support For Your Requirements Apex provides the broadest selection of fastener tools in the world. From this catalog you can choose from over 5,000 individual items: from bits, sockets and hand drivers to universal wrenches, extensions and adapters. If the tool you need is not in this catalog, call your Apex representative. We may have what you need as a noncatalog item—or our experienced staff of tooling experts can design and produce application specific fastener tools to suit your needs. iv Apex is the standard on assembly lines around the world. Precision manufactured with the highest quality materials. Responsive service for all your fastener tool needs. Made in the U.S.A. since 1933. v Important Notes User safety tips • Always wear safety glasses when using any tool. • Always visually inspect tool for damage and cracking. Immediately replace all damaged tools. • Do not modify or alter any tool. • Do not use tools beyond their limit or useful life. • Contact Apex for the recommended operating torque of any tool. Selecting the proper heat treat for bits Choosing the proper heat treat for screwdriver tools is important in achieving long tool life. Different applications, different operators, and different power tools require different heat treats. Apex offers a choice of three heat treat hardness levels in many of our screwdriver bits to match the particular customer’s application. These heat treats are specified by a letter suffix as follows: X - The hardest heat treat available I - Intermediate hardness R - Lowest hardness Selecting the heat treat best suited for a particular application may require some trial and error. The proper heat treat depends on the failure mode. If the bit breaks or shatters, select a bit with less hardness. If the failure mode is wear, select a harder bit. Many times both breakage and wear may occur within the same application. This can be due to a number of factors such a different operators, different torque values, and different power tool settings. In general, high torque applications require “R” heat treats to withstand twisting and resist breakage. The “X” heat treat is most suitable for low torque applications, particularly if hardened screws are used. If a failure occurs, a change in hardness may result in better service. The “X” heat treat is most common and should be selected unless the specifics of an application or an existing problem would suggest using “I” or “R” hardness. To specify a particular heat treat, add a letter suffix to the part number. For example, to specify “X” hardness in a #2 Phillips insert, the part number would be 440-2X. Not all Apex bits are available in all heat treats. Special heat treats can be supplied for a particular application. Contact your Apex representative for specific recommendations. Warning • Using any adapter may result in a torque overload and failure in the adapter, socket or fastener. • Do not use thin wall sockets with impact power tools. • Do not use universal wrenches with impact power tools. vi Solutions What’s the difference between an insert and a power bit? Insert bits are commonly used with a bit holder in power tool applications. This combination is economical, provides flexibility and allows a fastener to be magnetically held by the bit. Power bits are placed directly into the power tool chuck. See pages 48-52 for a complete listing of Apex bit holders. What’s the advantage of 27 Series bits? 27 Series bits are ideal for poorly recessed Phillips screws. A wider tip design fills out an inexact recess to make better contact. Why do Apex bits last so much longer? Apex’s premium tool alloys and proprietary heat treat help avoid typical problems such as shattering and premature bit wear. Most Apex bits are available in three different heat treat hardnesses. Refer to page vi for information on selecting the proper heat treat. What’s the advantage of reduced diameter bits? Reduced diameter bits are ideal for driving screws below the surface of drywall. What’s the advantage of Apex® ACR® bits? Painted, coated or corroded fasteners can present special problems. Apex® ACR® insert bits’ special wing-face ribs grip screw recesses to reduce stripping and cam-out which can result in damage to the surrounding workpiece. Choose from bits ribbed for screw removal, driving or both. They’re also available in both insert bits and power drives. vii In this section… Insert and Power Drive Bits For all these fastener styles: Phillips® Sel-o-fit® Clutch Head Slotted Frearson Torq-Set® Torx® B.N.A.E. Tri-Wing® Torx Plus® Socket Head Hi-Torque® Pozidriv® Square Recess Triple Square Bit Holders, Nutsetters, Extensions and Universal Wrenches Bit holders adapt hex drive and female square drive power tools to a variety of insert bits. Hex drive nutsetters, extensions and universal wrenches allow nutrunning in all types of applications. Selecting the correct Phillips point size Apex bits in these five point sizes will drive ANY Phillips screw Point Size 0 1 2 3 4 Wood Screws Body Flat, Dia. Oval 0 3/16 3 4 1/4 6 7 8 9 10 5/16 12 14 16 3/8 20 24 1/2 Round Flat, Oval, Binding Machine Screws Round, Truss, Brazier, Fillister Button 0 2 3 4 5 6 7 8 9 0 2 3 4 5 6 8 10 10 0 2 3 4 5 6 8 10 0 2 3 4 5 8 10 8 0 2 3 4 5 6 7 10 14 16 12 1/4 5/16 12 1/4 12 1/4 12 14 18 20 24 1/2 18 3/8 7/16 5/16 7/16 1/2 3/8 3/8 7/16 5/16 Sheet Metal Screws Flat, Round, Oval, Stove, Binding 2 5 12 IMPORTANT The table above will enable you to determine the Phillips point size required for any Phillips screws or bolts. The No. 2 and No. 3 point sizes cover the range of Phillips screws most commonly used. The Apex Phillips bits on the following pages are available in point sizes to drive any Phillips screw. viii Phillips Bits 1/4” Hex Insert Bits Part Number 440-1X 440-115 440-12 440-125 440-13 440-2X 440-2I 440-27* 440-215X 440-22X 440-225X 440-23 440-24 440-255 440-26 440-3X 440-3I 440-3125 440-3BN 440-32 440-325 440-33 440-34 440-4 Point Size 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 4 Overall Length In. mm 1 1 1/2 2 2 1/2 3 1 1 1 1 1/2 2 2 1/2 3 4 5 1/2 6 1 1 1 1/4 1 1/4 2 2 1/2 3 4 1 5/16 25 38 51 64 76 25 25 25 38 51 64 76 101 140 152 25 25 32 32 51 64 76 101 33 For shallow screw recesses Large body *For shallow screw recesses. See Tool Tip on page 7 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 1 Phillips Bits 1/4” Hex Insert Bits – Limited Clearance Part Number 446-0 446-1X 446-12 SD-1055-A 446-2X 446-2I 446-27* 446-215 446-22 446-215T 446-22T 446-225T 446-23T Point Size 0 1 1 1 2 2 2 2 2 2 2 2 2 Overall Length In. mm 1 1 2 2 1 1 1 1 1/2 2 1 1/2 2 2 1/2 3 25 25 51 51 25 25 25 38 51 38 51 64 76 Point Size Overall Length In. mm 1 1 1 2 2 2 2 2 2 2 2 3 3 3 1 1 1 1 1 1 1 1 2 2 2 1 1 1 25 25 25 25 25 25 25 25 51 51 51 25 25 25 Turned Length In. mm 7/16 7/16 7/16 1 3/8 7/16 7/16 7/16 7/16 7/16 1 1 1/2 1 3/4 2 1/4 * For shallow screw recesses see Tool Tip on page 7. 1/4” Hex Insert Bits – ACR® Part Number Part number suffix -R For removal Part number suffix -D For driving No part number suffix For both removal and driving 440-1-ACR1-R 440-1-ACR1-D 440-1-ACR1 440-2-ACR2-RX 440-2-ACR2-RI 440-2-ACR2-D 440-2-ACR2X 446-2-ACR2-D 440-22-ACR2-R 440-22-ACR2-D 440-22-ACR2 440-3-ACR3-RX 440-3-ACR3-D 440-3-ACR3 Limited Clearance ACR® is a trademark of the Phillips Screw Co. 2 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 11 11 11 35 11 11 11 11 11 25 38 44 57 Phillips Bits 5/16” Hex Insert Bits Part Number 480-1 480-2X 480-27* 480-22 480-225 480-24 480-3X 480-325 480-34 480-4X 480-4BNX 480-425 Point Size 1 2 2 2 2 2 3 3 3 4 4 4 Overall Length In. mm 1 1/4 1 1/4 1 1/4 2 2 1/2 4 1 1/4 2 1/2 4 1 1/4 1 1/2 2 1/2 32 32 32 51 64 101 32 64 101 32 38 64 For shallow screw recesses Large body * For shallow screw recesses see Tool Tip on page 7. 5/16” Hex Insert Bits – ACR® Part Number Part number suffix -R For removal Part number suffix -D For driving No part number suffix For both removal and driving 480-2-ACR2-R 480-2-ACR2-D 480-2-ACR2X 480-3-ACR3-R 480-3-ACR3-D 480-3-ACR3 480-4-ACR4-R 480-4-ACR4-D 480-4-ACR4 Point Size 2 2 2 3 3 3 4 4 4 Overall Length In. mm 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 32 32 32 32 32 ACR® is a trademark of the Phillips Screw Co. Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 3 Phillips Bits 5/16” Square Insert Bits Part Number Point Size 830-1 830-2X 830-27 830-3 830-4 Overall Length In. mm 1 2 2 3 4 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 29 29 29 29 29 For shallow screw recesses* 1/4” Hex Power Drive Part Number 4910X 4910-A 4910-BX 4910-C 491X 491-AX 491-BX 491-CX 491-CCX 492X 492I 492-AX 492-AI 492-BX 492-BI 492-CX 492-CI 492-CCX 492-27* 492-A-27* 492-B-27* 492-C-27* 492-CC-27* 492-200MM SD-2052-8 SD-2052-10 493X 493-AX 493-BX 493-CX 4930 4930-A 4930-B 4930-C 4930-CC 494 Point Size 0 0 0 0 1 1 1 1 1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 3 3 3 4 Overall Length In. mm 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 6 1 15/16 1 15/16 2 3/4 2 3/4 3 1/2 3 1/2 6 6 6 1 15/16 2 3/4 3 1/2 6 6 7 13/16 8 10 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 6 1 15/16 49 70 89 152 49 70 89 152 152 49 49 70 70 89 89 152 152 152 49 70 89 152 152 200 203 254 49 70 89 152 49 70 89 152 152 49 Body Diameter In. mm 1/8 1/8 1/8 1/8 3/16 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 9/32 9/32 5/16 5/16 5/16 5/16 1/4 1/4 1/4 1/4 1/4 3/8 3.2 3.2 3.2 3.2 4.8 4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 7.1 7.1 7.9 7.9 7.9 7.9 6.4 6.4 6.4 6.4 6.4 9.5 Turned Length In. mm 1 1/4 2 2 3/4 2 1 1/4 2 2 3/4 2 5 1/4 1 1/4 1 1/4 2 2 2 3/4 2 3/4 2 2 5 1/4 1 1/4 2 2 3/4 2 5 1/4 7 7 9 1 1 3/4 2 1/2 5 1 1/4 2 2 3/4 2 5 1/4 1 * For shallow screw recesses. See Tool Tip on page 7. 4 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 32 51 70 51 32 51 70 51 133 32 32 51 51 70 70 51 51 133 32 51 70 51 133 178 178 229 25 44 64 127 32 51 70 51 133 25 Phillips Bits 1/4” Hex Power Drive – ACR® Part Part number suffix -R For removal (diagram) Part number suffix -D For driving (diagram) No part number suffix For both removal and driving (diagram) Point Number Size In. 491-ACR1-R 491-ACR1-D 491-ACR1 492-ACR2-R 492-ACR2-D 492-ACR2X 492-A-ACR2-R 492-A-ACR2-D 492-A-ACR2X 492-B-ACR2-R 492-B-ACR2-D 492-B-ACR2X 492-C-ACR2-D 493-ACR3-R 493-ACR3-D 493-ACR3X 1 1 1 2 2 2 2 2 2 2 2 2 2 3 3 3 Overall Length mm In. 1 15/16 1 15/16 1 15/16 1 15/16 1 15/16 1 15/16 2 3/4 2 3/4 2 3/4 3 1/2 3 1/2 3 1/2 6 1 15/16 1 15/16 1 15/16 mm 49 49 49 49 49 49 70 70 70 89 89 89 152 49 49 49 Body Diameter In. mm 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 4.8 4.8 4.8 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 6.4 7.9 7.9 7.9 Turned Length 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 2 2 2 2 3/4 2 3/4 2 3/4 2 1 1 1 32 32 32 32 32 32 51 51 51 70 70 70 51 25 25 25 1/4” Hex Power Drive with Finder Sleeve Part Number SD-556-A SD-556 Point Size 2 2 Overall Length In. mm 3 1/2 6 Sleeve Diameter In. mm 89 152 7/16 7/16 11.1 11.1 7/16” Hex Power Drive Part 482 483X 484 Point Number Size In. 2 3 4 Overall Length mm In. 3 1/2 3 1/2 3 1/2 89 89 89 mm Body Diameter In. mm 1/4 5/16 3/8 6.4 7.9 9.5 Turned Length 2 1/4 2 1/4 2 1/4 57 57 57 ACR® is a trademark of the Phillips Screw Co. Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 5 Phillips Bits 9/32” No. 130A Yankee Drive Part Number Point Size 451 452 453 454 1 2 3 4 Overall Length In. mm 3 1/4 3 1/4 3 1/4 3 1/4 83 83 83 83 Body Diameter In. mm 3/16 9/32 5/16 3/8 4.8 7.1 7.9 9.5 10-32 Screw Shank Drive Part Number Point Size 501 501-A 502X 502-ACR2* SD-1342-2 502-A 503 1 1 2 2 2 2 3 Overall Length In. mm 1 1/2 1 13/16 1 1/2 1 1/2 1 3/4 1 13/16 1 1/2 38 46 38 38 45 46 38 Body Diameter In. mm 3/16 3/16 1/4 1/4 1/4 1/4 5/16 4.8 4.8 6.4 6.4 6.4 6.4 7.9 *Features ACR® anti-camout ribs. See Tool Tip on page 3. 12-24 Screw Shank Drive Part Number Point Size 551 552X 552I 553 1 2 2 3 Overall Length In. mm 1 3/16 1 3/16 1 3/16 1 3/16 30 30 30 30 Body Diameter In. mm .30 .30 .30 .30 7.6 7.6 7.6 7.6 1/4”-24 Screw Shank Drive Part Number 401 402X 403 6 Point Size 1 2 3 Overall Length In. mm 1 1/2 1 1/2 1 1/2 38 38 38 Body Diameter In. mm 3/16 1/4 5/16 4.8 6.4 7.9 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. Phillips Bits 8–32 Screw Shank Drive Part Number Point Size 591 592X 592-27* 1 2 3 Overall Length In. mm 1 3/16 1 3/16 1 3/16 Body Diameter In. mm 30 30 30 7/32 7/32 7/32 5.6 5.6 5.6 * For shallow screw recesses. Female Square Service Drive Part Number Female Square Drive Point Size 1/4 1/4 3/8 3/8 3/8 1/2 1/2 1/2 1 2 2 3 4 2 3 4 821 822 832 833 834 852 853 854 Overall Length In. mm 2 2 2 5/8 2 5/8 2 5/8 2 7/8 2 7/8 2 7/8 51 51 67 67 67 73 73 73 Body Diameter In. mm 1/4 1/4 5/16 5/16 5/16 5/16 5/16 3/8 6.4 6.4 7.9 7.9 7.9 7.9 7.9 9.5 Fein Drive Part Number FND-1PH FND-2PH FND-2PH-70M FND-3PH Point Size In. Length mm 1 2 2 3 2 2 2 3/4 2 53 53 70 53 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 7 Solutions Does Apex offer Torx® bits? Is there an easy way to select a bit? Torx® fasteners are becoming more and more common in automotive and appliance assembly. Apex provides a full selection of bits for Torx screws. Take the guesswork out of bit selection. Apex Phillips and Torx® ring gauges help you find the right bit for your fasteners. Order SD-3749 for Phillips and SD-4064-G for Torx®. (See pages 19–25) Torx® is a trademark of the Camcar Division of Textron. What is a finder sleeve? A finder sleeve makes it easy to engage slotted fasteners with the bit. It guides the bit so there is less ”searching” for the proper alignment between blade and slot. (See page 16) 8 Why do Apex bits last so much longer than other bits? Apex’s premium tool alloys and proprietary heat treat help avoid typical problems such as shattering and premature bit wear. Most Apex bits are available in three different heat treat hardnesses. Refer to page vi for information on selecting the proper heat treat. What’s the difference between Torx® and Torx Plus® bits? Does Apex offer fastener tools for the aircraft industry? Torx Plus® bits and fasteners feature a greater engagement area for higher torque transfer and reduced camout when driving Torx Plus® fasteners. They can provide up to 100% more drive cycles. Torx Plus® bits are not compatible with standard Torx® fasteners. Apex offers a full selection of fastener tools common to aircraft assembly and maintenance, including Tri-Wing®, Torq-Set®, Hi-Torque® and Phillips. (See pages 43-48) (See pages 19–25) Regular Torx® Torx Plus® is a trademark of the Camcar Division of Textron. Torx Plus® Tamper Resistent Bits are available on a limited basis. Please contact your Area Distributor or Representative for more details. Torq-Set® and ACR® are registered trademarks of the Phillips Screw Company. Does Apex offer mar resistant bits and sockets? Apex can nylon coat just about any of our bits or sockets. Nylon offers excellent mar resistance for assemblies that have painted, varnished or chromed surfaces. Nylon also offers some safety benefits by covering tool junctions. Contact your Apex distributor or representative for more information or for a quote. How do Torxalign® bits work? Torxalign® bits “wedge” into the Torx® recess to firmly hold the fastener to the bit. (See pages 19–24) What’s the difference between a Phillips and a Pozidriv® screw? The shallow “cross” indention in the screw head identifies a Pozidriv® fastener. The Pozidriv® bit and recess design provides contact than a standard Phillips for more torque with less possibility of camout. (See pages 26 & 27) 9 Slotted Screw Sizes Types of Heads Note: When ordering slotted bits, please remember that head sizes and slot widths of hardened, self tapping, and sheet metal screws do not conform to the same specifications as standard wood or machine screws described in the chart below. Also, because of variations in these dimensions among screws from different manufacturers, bits should be ordered to head and slot size rather than screw size. Diameter of Head Screw Sizes 1 2 3 4 5 6 7 8 9 10 12 14 Flat Head Oval Head Wood Mach. .146 .130 .172 .156 .199 .181 .225 .207 .252 .232 .279 .257 .305 .283 .332 .308 .358 .334 .385 .438 .410 .491 .461 1/4” 16 18 24 3/8” 10 .332 .308 .385 .359 .438 .410 .138 .122 .162 .146 .187 .169 .211 .193 .236 .217 .260 .240 .285 .264 .309 .287 .334 .311 .359 .334 .408 .382 .457 .424 .507 .477 .544 .512 .597 .563 5/16” 20 .146 .130 .172 .156 .199 .181 .225 .207 .252 .232 .279 .257 Round Head Wood Mach. .138 .122 .162 .146 .187 .169 .211 .193 .236 .217 .260 .240 Truss Head Binding Head Fillister Cap Mach. Pan Head .181 .171 .208 .197 .235 .223 .263 .249 .290 .275 .309 .287 .194 .180 .226 .211 .257 .241 .289 .272 .321 .303 .352 .333 .384 .364 .118 .104 .140 .124 .161 .145 .183 .166 .205 .187 .226 .208 .344 .326 .270 .250 .167 .155 .193 .180 .219 .205 .245 .231 .270 .256 .296 .281 .322 .306 .359 .334 .408 .382 .448 .425 .511 .487 .339 .378 .454 .430 .313 .292 .357 .334 .373 .357 .425 .407 .472 .443 .573 .546 .513 .488 .375 .363 .414 .389 .492 .473 .590 .557 .698 .666 .641 .609 .437 .424 .518 .490 .615 .594 .708 .670 .823 .787 .769 .731 .562 .547 .622 .590 .740 .716 .506 .476 .555 .523 .635 .600 .650 .614 .756 .716 .604 .570 .702 .664 .762 .722 Width of slot .026 .019 .031 .023 .035 .027 .039 .031 .043 .035 .048 .039 .048 .039 .054 .045 .054 .045 .060 .050 .067 .056 .075 .064 .075 .064 .075 .064 .084 .072 .084 .072 .084 .072 .094 .081 .094 .081 Slotted Bits 1/4” Hex Insert Bits – Limited Clearance Part Number Screw Size In. Length mm Blade Thickness In. mm 445-000 445-00 445-0X 445-10X 445-20 445-30 445-00-15 445-0-15 445-10-15 445-20-15 445-30-15 1F-2R 2F-3R 3F-4R 4F-5R 5F-6R 6F-7R 2F-3R 3F-4R 4F-5R 5F-6R 6F-7R 1 1 1 1 1 1 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 25 25 25 25 25 25 38 38 38 38 38 .021 .025 .030 .034 .036 .038 .028 .032 .034 .036 .038 .53 .64 .76 .86 .91 .97 .71 .81 .86 .91 .97 Blade Width In. mm .125 .140 .154 .185 .216 .248 .138 .154 .185 .216 .248 3.2 3.6 3.9 4.7 5.5 6.3 3.5 3.9 4.7 5.5 6.3 1/4” Hex Insert Bits Part Number 445-1X 445-2X 445-3X 445-4X 445-1-15 445-2-15 445-3-15 445-4-15 445-5X 445-6 Screw Size In. Length mm Blade Thickness In. mm 4F-5R 6F-8R 8F-10R 10F-12R 4F-5R 6F-8R 8F-10R 10F-12R 12F-14R 14F-16R 1 1 1 1 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 25 25 25 25 38 38 38 38 38 38 .034 .040 .042 .046 .034 .040 .042 .046 .050 .055 .86 1.02 1.07 1.17 .86 1.02 1.07 1.17 1.27 1.40 Blade Width In. mm 3/16 7/32 1/4 9/32 3/16 7/32 1/4 9/32 5/16 23/64 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 4.8 5.6 6.4 7.1 4.8 5.6 6.4 7.1 7.9 9.1 11 Slotted Bits 5/16” Hex Insert Bits Part Number Screw Size In. Length mm Blade Thickness In. mm 485-1 485-2 485-3 485-4 485-5 485-6 485-7X 4F-5R 6F-8R 8F-10R 10F-12R 12F-14R 14F-16R 16F-18R 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 3/4 38 38 38 38 38 38 45 .034 .040 .042 .046 .050 .055 .060 Blade Width/ Body Diameter In. mm .122 .122 .122 .122 .122 .122 .122 .134 .134 .134 .134 .134 .134 .134 .151 .151 .151 .151 .151 .151 .151 .187 .187 .187 .187 .187 .187 .86 1.02 1.07 1.17 1.27 1.40 1.52 Blade Width In. mm 3/16 7/32 1/4 .296 .328 .328 1/2 4.8 5.6 6.4 7.52 8.33 8.33 12.7 1/4” Hex Power Drive Part Number Screw Size Length In. mm Blade Thickness In. mm 320-000 326-000 323-000 327-000 324-000 325-000 328-000 320-00 326-00 323-00 327-00 324-00 325-00 328-00 320-0 326-0 323-0 327-0 324-0 325-0 328-0 320-1X 326-1 323-1 327-1 324-1 325-1 1F-2R 1F-2R 1F-2R 1F-2R 1F-2R 1F-2R 1F-2R 2F-3R 2F-3R 2F-3R 2F-3R 2F-3R 2F-3R 2F-3R 3F-4R 3F-4R 3F-4R 3F-4R 3F-4R 3F-4R 3F-4R 4F-5R 4F-5R 4F-5R 4F-5R 4F-5R 4F-5R 1 15/16 2 3/4 3 3 1/2 4 5 6 1 15/16 2 3/4 3 3 1/2 4 5 6 1 15/16 2 3/4 3 3 1/2 4 5 6 1 15/16 2 3/4 3 3 1/2 4 5 49 70 76 89 102 127 152 49 70 76 89 102 127 152 49 70 76 89 102 127 152 49 70 76 89 102 127 .022 .022 .022 .022 .022 .022 .022 .026 .026 .026 .026 .026 .026 .026 .030 .030 .030 .030 .030 .030 .030 .034 .034 .034 .034 .034 .034 .56 .56 .56 .56 .56 .56 .56 .66 .66 .66 .66 .66 .66 .66 .76 .76 .76 .76 .76 .76 .76 .86 .86 .86 .86 .86 .86 (continued on next page) 12 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 3.10 3.10 3.10 3.10 3.10 3.10 3.10 3.40 3.40 3.40 3.40 3.40 3.40 3.40 3.84 3.84 3.84 3.84 3.84 3.84 3.84 4.75 4.75 4.75 4.75 4.75 4.75 Slotted Bits 1/4” Hex Power Drive (continued) Part Number Screw Size In. 328-1 320-20 326-20 323-20 327-20 324-20 325-20 328-20 320-2X 326-2 323-2 327-2 324-2 325-2 328-2 320-3X 326-3 323-3 327-3 324-3 325-3 328-3 320-4X 326-4 323-4 327-4 324-4 325-4 328-4 320-5X 326-5 323-5 327-5 324-5 325-5 328-5 320-6 326-6 323-6 327-6 324-6 325-6 328-6 4F-5R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 5F-6R 6F-8R 6F-8R 6F-8R 6F-8R 6F-8R 6F-8R 6F-8R 8F-10R 8F-10R 8F-10R 8F-10R 8F-10R 8F-10R 8F-10R 10F-12R 10F-12R 10F-12R 10F-12R 10F-12R 10F-12R 10F-12R 12F-14R 12F-14R 12F-14R 12F-14R 12F-14R 12F-14R 12F-14R 6 1 15/16 2 3/4 3 3 1/2 4 5 6 1 15/16 2 3/4 3 3 1/2 4 5 6 1 15/16 2 3/4 3 3 1/2 4 5 6 1 15/16 2 3/4 3 3 1/2 4 5 6 1 15/16 2 3/4 3 3 1/2 4 5 6 1 15/16 2 3/4 3 3 1/2 4 5 6 mm Blade Thickness In. mm Blade Width/ Body Diameter In. mm 152 49 70 76 89 102 127 152 49 70 76 89 102 127 152 49 70 76 89 102 127 152 49 70 76 89 102 127 152 49 70 76 89 102 127 152 49 70 76 89 102 127 152 .034 .036 .036 .036 .036 .036 .036 .036 .036 .036 .036 .036 .036 .036 .036 .038 .038 .038 .038 .038 .038 .038 .042 .042 .042 .042 .042 .042 .042 .046 .046 .046 .046 .046 .046 .046 .050 .050 .050 .050 .050 .050 .050 .187 .215 .215 .215 .215 .215 .215 .215 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .250 .275 .275 .275 .275 .275 .275 .275 .312 .312 .312 .312 .312 .312 .312 .360 .360 .360 .360 .360 .360 .360 Length .86 .91 .91 .91 .91 .91 .91 .91 .91 .91 .91 .91 .91 .91 .91 .97 .97 .97 .97 .97 .97 .97 1.07 1.07 1.07 1.07 1.07 1.07 1.07 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.27 1.27 1.27 1.27 1.27 1.27 1.27 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 4.75 5.46 5.46 5.46 5.46 5.46 5.46 5.46 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.35 6.99 6.99 6.99 6.99 6.99 6.99 6.99 7.92 7.92 7.92 7.92 7.92 7.92 7.92 9.14 9.14 9.14 9.14 9.14 9.14 9.14 13 Slotted Bits 5/16” Hex Power Drive Part Number Screw Size In. 635-3 635-4 635-5 635-6 635-7 635-8 635-9 635-10 5F-6R 6F-8R 8F-10R 10F-12R 12F-14R 14F-16R 16F-20R 20F-22R 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 mm Blade Thickness In. mm Blade Width/ Body Diameter In. mm 57 57 57 57 57 57 57 57 .036 .038 .042 .046 .050 .055 .060 .062 .250 .275 .312 .360 .395 .457 .503 .545 Blade Width/ Body Diameter In. mm .125 .140 .156 .187 .225 .250 .275 .296 .309 Length .91 .97 1.07 1.17 1.27 1.40 1.52 1.57 6.35 6.99 7.92 9.14 10.03 11.61 12.78 13.84 10-32 Screw Shank Drive Part Number 103-000 103-00 103-0 103-1 103-2 103-3 103-4 103-5 103-6 14 Screw Size Length In. mm Blade Thickness In. mm 1F-2R 2F-3R 3F-4R 4F-5R 5F-6R 6F-7R 7F-8R 8F-10R 10F-12R 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 38 38 38 38 38 38 38 38 38 .022 .026 .030 .034 .036 .038 .040 .042 .046 .56 .66 .76 .86 .91 .97 1.02 1.07 1.17 3.18 3.56 3.96 4.75 5.72 6.35 7.24 7.52 7.85 Slotted Bits 12-24 Screw Shank Drive Part Number Screw Size In. Length mm Blade Thickness In. mm 260-1 260-2 260-3 260-4 260-5 260-7 260-8 260-9 2F-3R 3F-4R 4F-5R 5F-6R 6F-7R 8F-10R 10F-12R 12F-14R 1 3/16 1 3/16 1 3/16 1 3/16 1 3/16 1 3/16 1 3/16 1 3/16 30 30 30 30 30 30 30 30 .026 .030 .034 .036 .038 .042 .046 .050 Blade Width/ Body Diameter In. mm .125 .140 .156 .187 .225 .250 .285 .296 .315 .361 .361 .66 .76 .86 .91 .97 1.07 1.17 1.27 Blade Width In. mm .171 .191 .212 .238 .261 .309 .309 .309 4.3 4.7 5.4 6.0 6.6 7.8 7.8 7.8 1/4”-24 Screw Shank Drive Part Number 309-000 309-00 309-0 309-1 309-2 309-3 309-4 309-5 309-6 309-7 309-8 Screw Size Length In. mm Blade Thickness In. mm 1F-2R 2F-3R 3F-4R 4F-5R 5F-6R 6F-7R 7F-8R 8F-10R 10F-12R 12F-14R 14F-16R 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 38 38 38 38 38 38 38 38 38 38 38 .022 .026 .030 .034 .036 .038 .040 .042 .046 .050 .055 Blade Width/ Body Diameter In. mm .156 .187 .225 .250 .285 .315 .56 .66 .76 .86 .91 .97 1.02 1.07 1.17 1.27 1.40 3.18 3.56 3.96 4.75 5.72 6.35 7.24 7.52 8.00 9.17 9.17 9/32” No. 130A Yankee Drive Part Number Screw Size Length In. mm Blade Thickness In. mm 130-3 130-4 130-5 130-6 130-7 130-8 3F-4R 4F-5R 5F-6R 6F-7R 7F-8R 8F-10R 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 83 83 83 83 83 83 .030 .034 .036 .038 .040 .042 .76 .86 .91 .97 1.02 1.07 3.96 4.75 5.72 6.35 7.24 8.00 15 Slotted Bits 1/4” Power Drive with Finder Sleeves Each finder sleeve assembly part number begins with a letter prefix that denotes the particular sleeve used with that assembly. The chart below gives complete dimensional data for each finder sleeve. D Min. D Max. E G 16 D Max. D Min. Part No. Screw Size In. mm In. mm NOL L M P NP R S T U W Y 4F-5R 5F-6R 6F-6R 8F-6R 8F-10R 10F-12R 12F-14R 14F-16R 16F-20R 20F-22R 24F-24R .232 .260 .309 .368 .368 .415 .478 .522 .621 .665 .715 5.89 6.60 7.85 9.35 9.35 10.54 12.14 13.26 15.77 16.89 18.16 .217 .233 .261 .310 .310 .369 .416 .479 .523 .622 .666 5.51 5.92 6.63 7.87 7.87 9.37 10.57 12.17 13.28 15.80 16.92 Refer to Page iv for description of Rapid Select. Sleeve Length G In. mm 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 2 2 2 1/8 2 1/8 2 1/16 2 1/32 47.6 47.6 47.6 47.6 47.6 50.8 50.8 54.0 54.0 52.4 51.6 Sleeve Diameter E In. mm 3/8 3/8 7/16 1/2 7/16 9/16 5/8 11/16 3/4 13/16 15/16 9.5 9.5 11.1 12.7 11.1 14.3 15.9 17.5 19.1 20.3 23.8 Slotted Power Bits with Finder Sleeves 1/4” Hex Power Drive Part No. Complete Assembly Part No. Bit Only NOL-320 L-320X M-320X P-320X R-320X S-320 T-320X 320-LX 320-LX 320-MX 320-PX 320-RX 320-S 320-TX Screw Size Bit Length In. mm 4F-5R 5F-6R 6F-8R 8F-10R 10F-12R 12F-14R 14F-16R 3 3/4 3 3/4 3 3/4 3 3/4 3 3/4 3 7/8 4 1/8 95 95 95 95 95 98 105 Blade Thickness In. mm .036 .036 .038 .042 .046 .050 .055 .91 .91 .97 1.07 1.17 1.27 1.40 Bit Body Diameter In. mm .193 .193 .241 .290 .350 .395 .457 4.90 4.90 6.12 7.37 8.89 10.03 11.61 1/4” Hex Power Drive – Extra Short Series Part No. Complete Assembly OOOL-322 OOL-322 OL-322 L-322 M-322 P-322 R-322 Part No. Bit Only Screw Size 322-000L 322-00L 322-0L 322-L 322-M 322-P 322-R 2F-3R 3F-4R 4F-5R 5F-6R 6F-8R 8F-10R 10F-12R Bit Length In. mm 2 3/32 2 3/32 2 5/32 2 5/32 2 5/32 2 5/32 2 5/32 53 53 55 55 55 55 55 Blade Thickness In. mm .026 .030 .034 .036 .040 .042 .046 .66 .76 .86 .91 1.02 1.07 1.17 Bit Body Diameter In. mm .138 .154 .185 .185 .248 .283 .283 3.91 3.91 4.70 4.70 6.30 7.19 7.19 1/4” Hex Power Drive – Long Series Part No. Complete Assembly Part No. Bit Only Screw Size L-328 M-328 P-328 R-328 S-328 T-328 328-L 328-M 328-P 328-R 328-S 328-T 5F-6R 6F-8R 8F-10R 10F-12R 12F-14R 14F-16R Bit Length In. mm 6 1/2 6 1/2 6 1/2 6 1/2 6 1/2 6 1/2 165 165 165 165 165 165 Blade Thickness In. mm .036 .038 .046 .046 .050 .055 .91 .97 1.07 1.17 1.27 1.40 Bit Body Diameter In. mm .193 .241 .290 .350 .395 .457 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 4.90 6.12 7.37 8.89 10.03 11.61 17 Slotted Bits 7/16” Hex Power Drive with Finder Sleeves Part Number Screw Size Bit Length In. mm M-321 P-321 R-321 S-321 T-321 U-321 W-321 Y-321 6F-8R 8F-10R 10F-12R 12F-14R 14F-16R 16F-20R 20F-22R 24F-24R 3 3/4 3 3/4 3 7/8 3 7/8 4 1/8 4 1/8 4 1/8 4 1/8 Blade Thickness In. mm 95 95 98 98 105 105 105 105 .038 .046 .046 .050 .055 .060 .062 .065 .97 1.07 1.17 1.27 1.40 1.52 1.57 1.65 See chart on page 14 for sleeve diameters. Fein Drive Part Number FND-320-A FND-320-B FND-320-C FND-320-E FND-320-F FND-320-H FND-320-I 18 Width X Thickness (mm) In. Length mm 3 X .5 4 X .5 3.5 X .6 4 X .8 5.5 X .8 6.5 X 1.2 8 X 1.2 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 53 53 53 53 53 53 53 Bit Body Diameter In. mm .241 .290 .350 .395 .457 .503 .545 .595 6.12 7.37 8.89 10.03 11.61 12.78 13.84 15.11 Torx® Bits 1/4” Hex Insert Bits Part Number 440-TX-05X 440-TX-06X 440-TX-07X 440-TX-08X 440-TX-09X 440-TX-10X 440-TX-15X 440-TX-15-125 440-TX-20X 440-TX-20-125 440-TX-20-2 440-TX-25X 440-TX-27X 440-TX-30X 440-TX-40X 440-TX-40I 440-TX-45X* 440-TX-50X* Torxalign® Part Number Driver Size A (Ref.) A 440-TX-10-W 440-TX-15-W 440-TX-20-W 440-TX-25-W 440-TX-27-W 440-TX-30-W 440-TX-40-W 440-TX-40-W - T-5 T-6 T-7 T-8 T-9 T-10 T-15 T-15 T-20 T-20 T-20 T-25 T-27 T-30 T-40 T-40 T-45 T-50 .055 .065 .077 .090 .097 .107 .128 .128 .151 .151 .151 .173 .195 .216 .260 .260 .306 .346 Overall Length In. mm 1 1 1 1 1 1 1 1 1/4 1 1 1/4 2 1 1 1 1 1 1 1/4 1 1/4 25 25 25 25 25 25 25 32 25 32 51 25 25 25 25 25 32 32 * Hex will break before rated ultimate torque of the Torx® point is met. 1/4" Hex Insert Bits – Tamper Resistant** Part Number 440-TX-07-H 440-TX-08-H 440-TX-09-H 440-TX-10-H 440-TX-15-H 440-TX-20-H 440-TX-25-H 440-TX-27-H 440-TX-30-H 440-TX-40-H Driver Size A (Ref.) T-7-H T-8-H T-9-H T-10-H T-15-H T-20-H T-25-H T-27-H T-30-H T-40-H .077 .090 .097 .107 .128 .151 .173 .195 .216 .260 A Overall Length In. mm 1 1 1 1 1 1 1 1 1 1 25 25 25 25 25 25 25 25 25 25 ** Tamper resistant Torx® screws feature a post in the center of the recess–this post will only fit into a tamper resistant Torx® bit. Tamper resistant Torx® bits are available on a restricted distribution basis. Contact your local Apex representative for details. Torx® and Torxalign® are registered trademarks of the Camcar Division of Textron. Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 19 Torx® Bits 5/16” Hex Insert Bits Part Number Driver Size A (Ref.) 480-TX-20 480-TX-25 480-TX-27 480-TX-30X 480-TX-40X 480-TX-40-4 480-TX-45X 480-TX-45-6 480-TX-50X 480-TX-55X T-20 T-25 T-27 T-30 T-40 T-40 T-45 T-45 T-50 T-55 .151 .173 .195 .216 .260 .260 .306 .306 .346 .440 Overall Length In. mm A 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 4 1 1/4 6 1 1/4 1 1/4 32 32 32 32 32 102 32 152 32 32 5/16” Hex Insert Bits – Tamper Resistant** Part Number 480-TX-40-H 480-TX-45-H 480-TX-50-H 480-TX-55-H Driver Size A (Ref.) T-40-H T-45-H T-50-H T-55-H .260 .306 .346 .440 Overall Length In. mm A 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 **Tamper resistant Torx® bits are available on a restricted distribution basis. Contact your local Apex representative for details. 5/8” Hex Insert Bits Part Number SZ-TX-55-A SZ-TX-60-A SZ-TX-70-A SZ-TX-70-A-3 SZ-TX-80-A Hex Flat Type* DP DP DP TH TH Driver Size A (Ref.) T-55 T-60 T-70 T-70 T-80 .440 .520 .610 .610 .689 A Overall Length In. mm 1 9/16 1 9/16 1 9/16 3 1 9/16 40 40 40 76 40 *DP-Drill Point; TH-Thru Hole. 5/8” insert bits are used with SC and RP adapters found on pages 51. 7/8” Hex Insert Bits Part Number SZ-TX-90-A SZ-TX-100-A Hex Flat Type* TH TH Driver Size A (Ref.) T-90 T-100 .782 .870 A Overall Length In. mm 2 2 51 51 *TH-Thru Hole. 7/8” insert bits are used with RP adapters found on pages 51. Torx® and Torxalign® are registered trademarks of the Camcar Division of Textron. 20 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. Torx® Bits 1/4” Hex Power Drive Part Number Driver Size A (Ref.) 49-TX-05 49-A-TX-05 49-B-TX-05 49-TX-06 49-A-TX-06 49-TX-07 49-A-TX-07 49-B-TX-07 49-C-TX-07 49-TX-08 49-A-TX-08 49-B-TX-08 49-C-TX-08 49-TX-09 49-A-TX-09 49-B-TX-09 49-C-TX-09 49-TX-10 49-A-TX-10 SD-4693 49-B-TX-10 49-C-TX-10 49-TX-15 49-A-TX-15 49-B-TX-15 49-C-TX-15 49-TX-20 49-A-TX-20 49-B-TX-20 49-TX-20-5 49-C-TX-20 49-TX-25 49-A-TX-25 49-B-TX-25 49-C-TX-25 49-TX-27 49-A-TX-27 49-B-TX-27 49-C-TX-27 49-TX-30 49-A-TX-30 49-B-TX-30 49-C-TX-30 49-TX-40 49-A-TX-40 49-B-TX-40 49-C-TX-40 T-5 T-5 T-5 T-6 T-6 T-7 T-7 T-7 T-7 T-8 T-8 T-8 T-8 T-9 T-9 T-9 T-9 T-10 T-10 T-10 T-10 T-10 T-15 T-15 T-15 T-15 T-20 T-20 T-20 T-20 T-20 T-25 T-25 T-25 T-25 T-27 T-27 T-27 T-27 T-30 T-30 T-30 T-30 T-40 T-40 T-40 T-40 .055 .055 .055 .065 .065 .077 .077 .077 .077 .090 .090 .090 .090 .097 .097 .097 .097 .107 .107 .107 .107 .107 .128 .128 .128 .128 .151 .151 .151 .151 .151 .173 .173 .173 .173 .195 .195 .195 .195 .216 .216 .216 .216 .260 .260 .260 .260 Refer to Page iv for description of Rapid Select. A Body Diameter In. mm .119 .119 .119 .119 .119 .119 .119 .119 .119 .119 .119 .119 .119 .119 .119 .119 .119 .150 .150 .150 .150 .150 .150 .150 .150 .150 .171 .171 .171 .171 .171 .193 .193 .193 .193 .215 .215 .215 .215 .236 .236 .236 .236 .309 .309 .309 .309 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 3.8 4.3 4.3 4.3 4.3 4.3 4.9 4.9 4.9 4.9 5.5 5.5 5.5 5.5 6.0 6.0 6.0 6.0 7.8 7.8 7.8 7.8 Overall Length In. mm 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 3 1/2 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 5 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 49 70 89 49 70 49 70 89 152 49 70 89 152 49 70 89 152 49 70 75 89 152 49 70 89 152 49 70 89 127 152 49 70 89 152 49 70 89 152 49 70 89 152 49 70 89 152 21 Torx® Bits 1/4” Hex Power Drive – Torxalign® Part Number Driver Size A (Ref.) 49-TX-08-W 49-TX-09-W 49-TX-10-W 49-TX-15-W 49-A-TX-15-W 49-B-TX-15-W 49-TX-20-W 49-B-TX-20-W 49-TX-25-W 49-TX-27-W 49-TX-30-W 49-B-TX-30-W T-8 T-9 T-10 T-15 T-15 T-15 T-20 T-20 T-25 T-27 T-30 T-30 .090 .097 .107 .128 .128 .128 .151 .151 .173 .195 .216 .216 Body Diameter In. mm A .119 .119 .150 .150 .150 .150 .171 .171 .193 .215 .236 .236 3.0 3.0 3.8 3.8 3.8 3.8 4.3 4.3 4.9 5.5 6.0 6.0 Overall Length In. mm 1 15/16 1 15/16 1 15/16 1 15/16 2 3/4 3 1/2 1 15/16 3 1/2 1 15/16 1 15/16 1 15/16 3 1/2 49 49 49 49 70 89 49 89 49 49 49 89 1/4” Hex Power Drive – Tamper Resistant** Part Number 49-TX-10-H 49-A-TX-10-H 49-TX-15-H 49-A-TX-15-H 49-B-TX-15-H 49-A-TX-20-H 49-B-TX-20-H 49-C-TX-20-H Driver Size A (Ref.) T-10-H T-10-H T-15-H T-15-H T-15-H T-20-H T-20-H T-20-H .107 .107 .128 .128 .128 .151 .151 .151 Body Diameter In. mm A .150 .150 .150 .150 .150 .171 .171 .171 3.8 3.8 3.8 3.8 3.8 4.3 4.3 4.3 Overall Length In. mm 1 15/16 2 3/4 1 15/16 2 3/4 3 1/2 2 3/4 3 1/2 6 49 70 49 70 89 70 89 152 **Tamper resistant Torx® bits are available on a restricted distribution basis. Contact your local Apex representative for details. 1/4” Hex Power Drive with Finder Sleeves Part Number Driver Size M-32-TX-15 M-32-TX-20 NP-32-TX-25 R-32-TX-27 S-32-TX-30 T-15 T-20 T-25 T-27 T-30 Sleeve Number* M M NP R S A (Ref.) A .128 .151 .173 .195 .216 Sleeve Diameter In. mm .437 .437 .437 .563 .625 12.1 12.1 12.1 14.3 15.9 Overall Length In. mm 3 1/2 3 1/2 3 3/4 3 5/8 3 7/8 89 89 95 92 98 *See page 14 for Sleeve Selection 7/16” Hex Power Drive Part Number Driver Size A (Ref.) 48-TX-40 48-TX-45 48-TX-50 48-TX-55 T-40 T-45 T-50 T-55 .260 .306 .346 .440 A Torx® and Torxalign® are registered trademarks of the Camcar Division of Textron. 22 Refer to Page iv for description of Rapid Select. Body Diameter In. mm .277 .323 .363 .503 7.0 8.2 9.2 12.8 Overall Length In. mm 3 1/2 3 1/2 3 1/2 3 3/4 89 89 89 95 Torx® Bits 10-32 Screw Shank Drive Part Number Driver Size A (Ref.) 50-TX-08 50-TX-10 50-TX-15 50-TX-20 T-8 T-10 T-15 T-20 .090 .107 .128 .151 Part Number Driver Size A (Ref.) 55-TX-10 55-TX-15 SD-4048 55-TX-20 55-TX-25 55-TX-30 T-10 T-15 T-15 T-20 T-25 T-30 .107 .128 .128 .151 .173 .216 Body Diameter In. mm A .125 .150 .150 .171 3.2 3.8 3.8 4.3 Overall Length In. mm 1 1/2 1 1/2 1 1/2 1 1/2 38 38 38 38 12-24 Screw Shank Drive Body Diameter In. mm A .150 .150 .309 .171 .193 .309 3.8 3.8 7.8 4.3 4.9 7.8 Overall Length In. mm 1 3/16 1 3/16 1 3/16 1 3/16 1 3/16 1 3/16 30 30 30 30 30 30 Female Square Service Drive Part Number Driver Size A (Ref.) 834-TX-25 834-TX30-1.62 834-TX40-2.95 834-TX50-1.62 834-TX-45-5 834-TX-50 854-TX-50 854-TX-55-150M T-25 T-30 T-40 T-50 T-45 T-50 T-50 T-55 .173 .216 .260 .346 .306 .346 .346 .346 A Refer to Page iv for description of Rapid Select. Square Drive 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 Body Diameter In. mm .240 .234 .277 .373 .323 .363 .323 .363 6.1 5.9 7.0 9.4 8.2 9.2 8.2 9.2 Overall Length In. mm 2 13/16 1 5/8 2 61/64 1 1/4 5 2 5/8 2 7/8 5 7/8 71 41 75 41 125 66 73 150 23 Torx® Bits 1” Square Drive Adapters with Torx® Insert Bit B Part Number Driver Size A (Ref.) SZ-8L-TX-70 SZ-TX-100 T-70 T-100 .610 .870 Part Number Driver Size A (Ref.) T-10 T-20 T-25 T-27 T-30 .107 .151 .173 .195 .216 Overall Length In. mm A 3 19/32 3 19/32 91 91 Fein Drive FND-TX10 FND-TX20 FND-TX25 FND-TX27 FND-TX30 Overall Length In. mm A 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 Torx® and Torxalign® are registered trademarks of the Camcar Division of Textron. 24 70 70 70 70 70 Bit Length (B) In. mm .90 1.13 23 29 Torx Plus® Bits 1/4” Hex Insert Bits Part Number Driver Size A (Ref.) 440-10IP 440-15IP 440-20IP 440-25IP 440-27IP 440-30IP 440-40IP 10IP 15IP 20IP 25IP 27IP 30IP 40IP .107 .128 .151 .173 .195 .216 .260 Part Number Driver Size A (Ref.) 49-10IP 49-A-10IP 49-B-10IP 49-15IP 49-A-15IP 49-B-15IP 49-20IP 49-A-20IP 49-B-20IP 49-25IP 49-A-25IP 49-B-25IP 49-27IP 49-A-27IP 49-B-27IP 49-30IP 49-A-30IP 49-B-30IP 49-40IP 49-A-40IP 49-B-40IP 10IP 10IP 10IP 15IP 15IP 15IP 20IP 20IP 20IP 25IP 25IP 25IP 27IP 27IP 27IP 30IP 30IP 30IP 40IP 40IP 40IP .107 .107 .107 .128 .128 .128 .151 .151 .151 .173 .173 .173 .195 .195 .195 .216 .216 .216 .260 .260 .260 A Overall Length In. mm 1 1 1 1 1 1 1 25 25 25 25 25 25 25 1/4” Hex Power Drive A Overall Length In. mm 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 3 1/2 49 70 89 49 70 89 49 70 89 49 70 89 49 70 89 49 70 89 49 70 89 Torx Plus® is a trademark of the Camcar Division of Textron. Torx Plus® Tamper Resistent Bits are available on a limited basis. Please contact your Area Distributor or Representative for more details. 25 Pozidriv® Bits 1/4” Hex Insert Bits Part Number 440-1-PZD 440-125-PZD 440-2-PZDX 440-215-PZD 440-22-PZD 440-225-PZD 440-3-PZD 440-4-PZD Point Size 1 1 2 2 2 2 3 4 Overall Length In. mm 1 2 1/2 1 1 1/2 2 2 1/2 1 1 1/4 25 64 25 38 51 64 25 32 1/4” Hex Insert Bits – Limited Clearance Part Number 446-1-PZD 446-2-PZDX 446-22-PZD Point Size 1 2 2 Overall Length In. mm 1 1 2 25.4 25.4 50.8 Turned Length In. mm 7/16 7/16 7/16 11 11 11 5/16” Hex Insert Bits Part Number 480-1-PZD 480-2-PZD 480-3-PZD 480-4-PZD 480-4BN-PZD Point Size 1 2 3 4 4 Overall Length In. mm 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 32 32 32 32 38 Large body Pozidriv® is a registered trademark of the Phillips Screw Company. 26 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. Pozidriv® Bits 1/4” Hex Power Drive Part Number Point Size 491-PZD 491-A-PZD 491-B-PZD 491-C-PZD 492-PZDX 492-A-PZDX 492-B-PZDX 492-C-PZD 493-PZD 493-A-PZD 493-B-PZD 493-C-PZD 1 1 1 1 2 2 2 2 3 3 3 3 Overall Length In. mm 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 49 70 89 152 49 70 89 152 49 70 89 152 Body Diameter In. mm 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 4.8 4.8 4.8 4.8 6.4 6.4 6.4 6.4 7.9 7.9 7.9 7.9 Turned Length In. mm 1 1/4 2 2 3/4 2 1 1/4 2 2 3/4 2 1 1 3/4 2 1/4 5 32 51 70 51 32 51 70 51 25 44 57 127 1/4”-24 Screw Shank Drive Part Number 401-PZD 402-PZD 403-PZD Point Size Overall Length In. mm 1 2 3 1 1/2 1 1/2 1 1/2 38 38 38 Body Diameter In. mm 3/16 1/4 5/16 4.8 6.4 7.9 8-32 Screw Shank Drive Part Number 591-PZD 592-PZD Point Size 1 2 Overall Length In. mm 1 3/16 1 3/16 30 30 Body Diameter In. mm 7/32 7/32 5.6 5.6 10-32 Screw Shank Drive Part Number 502-PZD SD-1342-2-PZD Point Size 2 2 Overall Length In. mm 1 1/2 1 3/4 38 45 Body Diameter In. mm 1/4 1/4 6.4 6.4 Pozidriv® is a registered trademark of the Phillips Screw Company. Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 27 Pozidriv® Bits Fein Drive Part Number FND-1PZD FND-2PZD FND-2PZD-70M FND-3PZD FND-3PZD-70M 28 Point Size 1 2 2 3 3 Overall Length In. mm 2 2 2 3/4 2 2 3/4 53 53 70 53 70 Sel-O-Fit Bits 1/4” Hex Insert Bits Part Number 440-1-SF 440-2-SF 440-215-SF 440-22-SF 440-225-SF 440-3-SF 440-4-SF Point Size 1 2 2 2 2 3 4 Overall Length In. mm 1 1 1 1/2 2 2 1/2 1 1 1/4 25 25 38 51 64 25 32 1/4” Hex Insert Bits – Limited Clearance Part Number 446-1-SF 446-2-SF Point Size Overall Length In. mm 1 2 1 1 Turned Length In. mm 25 25 7/16 7/16 11 11 5/16” Hex Insert Bits Part Number 480-2-SF 480-3-SF 480-4-SF 480-4BN-SF Point Size 2 3 4 4 Overall Length In. mm 1 1/4 1 1/4 1 1/4 1 1/2 32 32 32 38 Large body 1/4” Hex Power Drive Part Number 491-SF 491-A-SF 491-B-SF 491-C-SF 492-SF 492-A-SF 492-B-SF 492-C-SF 493-SF 493-A-SF 493-B-SF 493-C-SF Point Size 1 1 1 1 2 2 2 2 3 3 3 3 Overall Length In. mm 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 49 70 89 152 49 70 89 152 49 70 89 152 Body Diameter In. mm 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 5 5 5 5 6 6 6 6 8 8 8 8 Turned Length In. mm 1 1/4 2 2 3/4 2 1 1/4 2 2 3/4 2 1 1 3/4 2 1/2 5 32 51 70 51 32 51 70 51 25 44 64 127 Sel-O-Fit® bits are designed to provide a more efficient means of driving Pozidriv® screws. The Sel-O-Fit bit places torque on the strongest and most mechanically advantageous portion of the driver tip. This allows more torque to be applied while minimizing the possibility of breakage and camout. Sel-O-Fit® is a registered trademark of Cooper Industries. 29 Frearson Bits 1/4” Hex Insert Bits Part Number Point Size 440-F 446-F All All Overall Length In. mm 1 1 25 25 For limited clearance 5/16” Hex Insert Bit Part Number Point Size 480-F All Overall Length In. mm 1 3/8 35 1/4” Hex Power Drive Part Number Screw Size 491-F 491-AF 491-BF 491-CF 492-F 492-AF 492-BF 492-CF 493-F 493-AF 493-BF 493-CF All All All All All All All All All All All All Overall Length In. mm 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 49 70 89 152 49 70 89 152 49 70 89 152 Body Diameter In. mm 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 5 5 5 5 6 6 6 6 8 8 8 8 The Frearson recess is designed so that any size bit will fit any size recess. Choose bits on the basis of body diameter – the larger the screw, the larger the body diameter. 30 Turned Length In. mm 1 1/4 2 2 3/4 2 1 1/4 2 2 3/4 2 1 1 3/4 2 1/2 5 32 51 70 51 32 51 70 51 25 44 64 127 Frearson Bits 12-24 Screw Shank Drive Part Number Screw Size 552-F All Overall Length In. mm 1 3/16 30 Body Diameter In. mm .30 8 1/4” Female Square Drive Part Number Screw Size 822-F All Overall Length In. mm 2 51 Body Diameter In. mm 1/4 6 3/8” Female Square Drive Part Number Screw Size 832-F 833-F 834-F All All All Overall Length In. mm 2 5/8 2 5/8 2 5/8 67 67 67 Body Diameter In. mm 1/4 5/16 3/8 6 8 10 B.N.A.E. Bits 1/4” Hex Insert Bits Part Number Point Size BNAE-3mm BNAE-4mm BNAE-5mm BNAE-6mm BNAE-8mm 3mm 4mm 5mm 6mm 8mm Overall Length In. mm 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 29 29 29 29 29 1/4” Hex Insert Bits – ACR® Part Number Point Size BNAE-4mm-ACR BNAE-5mm-ACR BNAE-6mm-ACR 4mm 5mm 6mm Overall Length In. mm 1 1/8 1 1/8 1 1/8 29 29 29 ACR® ribs for both removal and driving ACR® is a trademark of the Phillips Screw Co. 31 Socket Head Sizing Chart SAE Nominal Socket Head Cap Screws Hex Size, 1960 1936 Inches Series Series Flat Head Cap Screws Button Head Cap Screws Set Screws Shoulder Screws Pressure Plugs Allenuts Low Head Cap Screws 3, 4 3, 4 5, 6 8 — 10 — 1/4 5/16 3/8 — — — — — — — — — — — — — — — 5, 6 8 10 — 1/4 — 5/16 3/8 7/16 1/2 5/8 3/4 — 7/8 1, 1 1/8 1 1/4, 1 3/8 1 1/2 — 1 3/4, 2 — — — — — — — — — 1/4 — 5/16 3/8 — 1/2 5/8 3/4 — 1 — 1 1/4 — 1 1/2 1 3/4 2 — — — — — — — — — — 1/16 1/8 — 1/4 3/8 1/2 — — 3/4 1 1 1/4 — 1 1/2, 2 — — — — 4 — — — — 4, 5 — 6 8, 10 — 1/4 5/16 3/8 7/16 1/2 — 5/8 3/4 7/8 1 1 1/4 1 1/2 — — .050 5, 6 8 10 — 1/4 — 5/16 3/8 7/16 1/2 5/8 — — — — — — — — — — 1 3/4 — .050 0 0, 1 1, 2 1/16 1 2 3, 4 5/64 2, 3 3, 4 5, 6 3/32 4, 5 5, 6 8 7/64 6 — — 1/8 — 8 10 9/64 8 10 — 5/32 10 1/4 1/4 3/16 1/4 — 5/16 7/32 — 5/16 3/8 1/4 5/16 — 7/16 5/16 3/8 3/8, 7/16 1/2 3/8 7/16, 1/2 1/2 5/8 7/16 — — — 1/2 5/8 5/8 3/4 9/16 — 3/4, 7/8 7/8 5/8 3/4 1 1 3/4 7/8, 1 1 1/8, 1 1/4, 1 3/8 1 1/8 7/8 1 1/8, 1 1/4 — 1 1/4, 1 3/8 1 1 3/8, 1 1/2 1 1/2 1 1/2 1 1/4 1 3/4 — — 1 1/2 2 — — 1 3/4 2 1/4, 2 1/2 — — 2 2 3/4 — — Metric Nominal hex Size, MM 1.5 2 2.5 3 4 5 6 8 10 12 14 17 19 32 Socket Head Cap Screws Flat Head Cap Screws M1.6, M1.7, M2 — M2.3, M2.5, M2.6 M3 M3 M4 M4 M5 M5 M6 M6 M8 M8 M10 M10 M12 M12 M14, M16 M14 M20 M16 — M20 — M24 — Button Head Cap Screws Set Screws Shoulder Screws Allenuts Low Head Cap Screws — M3 M4 M5 M6 M8 M10 M12 — — — — — M3 M4 M5 M6 M8 M10 M12, M14 M16 M20 M24 — — — — — — 6mm 8mm 10mm 12mm 16mm 20mm — — — — — — — M3 M4 M5 M6 M8 M10 M12 — M16 — — — — M4 M5 M6 M8 M10 M12 M14 M16 M20, M22 M24 Socket Head Bits 1/4” Hex Insert Bits Part Number Hex Size 185-000X 185-00 185-0 185-1X 185-9X 185-2X 185-10X 185-3X 185-4X 185-4-4 185-5 185-6 185-7 185-8 .050 1/16 5/64 3/32 7/64 1/8 9/64 5/32 3/16 3/16 7/32 1/4 5/16 3/8 Overall Length In. mm 1 1 1 1 1 1 1 1 5/16 1 5/16 4 1 5/16 1 5/16 1 1/4 1 1/4 25 25 25 25 25 25 25 33 33 102 33 33 32 32 1/4” Hex Insert Bits – Metric Part Number 185-1.5mm 185-2mm 185-2.5mm 185-3mm 185-4mm 185-5mm 185-6mm 185-7mm 185-8mm 185-9mm 185-10mm Hex Size 1.5mm 2mm 2.5mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm Overall Length In. mm 1 1 1 1 1 5/16 1 5/16 1 5/16 1 1/4 1 1/4 1 1/4 1 1/4 25 25 25 25 33 33 33 32 32 32 32 5/16” Hex Insert Bits Part Number Hex Size 315-3 315-4 315-5 315-6 315-7 315-8 5/32 3/16 7/32 1/4 5/16 3/8 Overall Length In. mm 1 5/16 1 5/16 1 5/16 1 5/16 1 5/16 1 5/16 33 33 33 33 33 33 Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 33 Socket Head Bits 5/16” Hex Insert Bits – Metric Part Number 315-2.5mm 315-3mm 315-4mm 315-5mm 315-6mm 315-7mm 315-8mm 315-9mm 315-10mm 315-12mm 315-14mm Hex Size 2.5mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 12mm 14mm Overall Length In. mm 1 1 1 5/16 1 5/16 1 5/16 1 5/16 1 5/16 1 5/16 1 3/8 1 1/4 1 1/4 25 25 33 33 33 33 33 33 35 32 32 1/4” Hex Power Drive 34 Part Number Hex Size AM-02 AM-02-A AM-03 AM-03-3 AM-03-6 AM-03-A AM-04 AM-04-3 AM-04-35 AM-04-4 AM-04-5 AM-04-6 AM-04-A AM-04-A-4 AM-05 AM-05-3 AM-05-35 AM-05-4 AM-05-5 AM-05-6 AM-05-8 AM-06 AM-06-3 AM-06-4 AM-06-6 AM-07 AM-08 AM-10 1/16 5/64 3/32 3/32 3/32 7/64 1/8 1/8 1/8 1/8 1/8 1/8 9/64 9/64 5/32 5/32 5/32 5/32 5/32 5/32 5/32 3/16 3/16 3/16 3/16 7/32 1/4 5/16 Refer to Page iv for description of Rapid Select. Overall Length In. mm 1 15/16 1 15/16 1 15/16 3 6 1 15/16 1 15/16 3 3 1/2 4 5 6 1 15/16 4 1 15/16 3 3 1/2 4 3 6 8 1 15/16 3 4 6 1 15/16 1 15/16 1 15/16 49 49 49 76 152 49 49 76 89 102 127 152 49 102 49 76 89 102 127 152 203 49 76 102 152 49 49 49 Socket Head Bits 1/4" Hex Power Drive – Metric Part Number AM-1.5mm AM-2mm AM-2.5mm AM-3mm AM-3mm-3 AM-3mm-4 AM-4mm AM-5mm AM-5mm-4 AM-6mm AM-6mm-4 AM-7mm AM-8mm AM-10mm Hex Size 1.5mm 2mm 2.5mm 3mm 3mm 3mm 4mm 5mm 5mm 6mm 6mm 7mm 8mm 10mm Overall Length In. mm 1 15/16 1 15/16 1 15/16 1 15/16 3 4 1 15/16 1 15/16 4 1 15/16 4 1 15/16 1 15/16 1 15/16 49 49 49 49 76 102 49 49 102 49 102 49 49 49 5/16” Hex Power Drive Part Number Hex Size AS-04 AS-05 AS-06 AS-07 AS-08 AS-10 AS-12 1/8 5/32 3/16 7/32 1/4 5/16 3/8 Refer to Page iv for description of Rapid Select. Overall Length In. mm 3 3 3 3 3 3 3 76 76 76 76 76 76 76 35 Socket Head Bits 7/16” Hex Power Drive Part Number Hex Size AN-04 AN-04-A AN-05 AN-05-6 AN-06 AN-06-6 AN-07 AN-07-8 AN-08 AN-08-8 AN-09 AN-10 AN-10-6 AN-12 AN-12-6 AN-16 AN-16-6 1/8 9/64 5/32 5/32 3/16 3/16 7/32 7/32 1/4 1/4 9/32 5/16 5/16 3/8 3/8 1/2 1/2 Overall Length In. mm 3 1/2 3 1/2 3 1/2 6 3 1/2 6 3 1/2 8 3 1/2 8 3 1/2 3 1/2 6 3 1/2 6 3 1/2 6 89 89 89 152 89 152 89 203 89 203 89 89 152 89 152 89 152 7/16” Hex Power Drive—Metric Part Number AN-3mm AN-4mm AN-5mm AN-6mm AN-8mm AN-10mm AN-12mm AN-14mm AN-14mm-6 36 Hex Size 3mm 4mm 5mm 6mm 8mm 10mm 12mm 14mm 14mm Refer to Page iv for description of Rapid Select. Overall Length In. mm 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 6 89 89 89 89 89 89 89 89 152 Socket Head Bits 5/8” Hex Power Drive Part Number Hex Size Overall Length In. mm AP-08 AP-10 AP-12 AP-16 AP-18 AP-20 AP-24 1/4 5/16 3/8 1/2 9/16 5/8 3/4 4 4 4 4 4 4 4 Part Number Hex Size Overall Length In. mm 102 102 102 102 102 102 102 Fein Drive FND-185-3MM FND-185-4MM FND-185-5MM FND-185-8MM 3 mm 4 mm 5 mm 8 mm 2 2 2 2 53 53 53 53 Socket Head Bits with Square Drive Adapters, SAE 3/8” Square Drive Complete SZ-9 SZ-7 SZ-10 SZ-11 SZ-12 SZ-13 SZ-14 SZ-15 SZ-16 SZ-17 SZ-18 SZ-19 Part Number Adapter Only SC-314 SC-314 SC-314 SC-314 SC-314 SC-314 SC-314 SC-314 SC-314 SC-314 SC-314 SC-314 Insert Only SZ-9-A SZ-7-A SZ-10-A SZ-11-A SZ-12-A SZ-13-A SZ-14-A SZ-15-A SZ-16-A SZ-17-A SZ-18-A SZ-19-A Refer to Page iv for description of Rapid Select. Overall Length Hex Size In. mm 3/32 7/64 1/8 5/32 3/16 7/32 1/4 5/16 3/8 1/2 9/16 5/8 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 57 57 57 57 57 57 57 57 57 57 57 57 Length of Insert In. mm 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 35 35 35 35 35 35 35 35 35 35 35 35 37 Socket Head Bits with Square Drive Adapters, SAE 1/2” Square Drive Complete SZ-40 SZ-41 SZ-20 SZ-21 SZ-22 SZ-23 SZ-24 SZ-25 SZ-42 SZ-43 SZ-44 SZ-26 SZ-27 Part Number Adapter Only SC-514 SC-514 SC-514 SC-514 SC-514 SC-514 SC-514 SC-514 SC-520 SC-514 SC-520 SC-514 RP-520 Insert Only SZ-10-A SZ-11-A SZ-12-A SZ-13-A SZ-14-A SZ-15-A SZ-16-A SZ-17-A SZ-31-A SZ-18-A SZ-32-A SZ-19-A SZ-33-A Overall Length Hex Size In. mm 1/8 5/32 3/16 7/32 1/4 5/16 3/8 1/2 1/2 9/16 9/16 5/8 5/8 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 64 64 64 64 64 64 64 64 64 64 64 64 64 Length of Insert In. mm 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 9/16 1 3/8 1 9/16 1 3/8 1 9/16 35 35 35 35 35 35 35 35 40 35 40 35 40 Adapters with an “SC” prefix feature a set screw for locking in the bit. An “RP” prefix indicates adapters with a thru hole for a spring pin. 7/16” Hex Insert Bit Only Part Number Hex Size SZ-11-A-3 SZ-12-A-2 SZ-12-A-3 SZ-12-A-6 SZ-13-A-3 SZ-14-A-3 SZ-14-A-4 SZ-15-A-2 SZ-15-A-3 SZ-15-A-4 SZ-16-A-3 SZ-16-A-4 5/32 3/16 3/16 3/16 7/32 1/4 1/4 5/16 5/16 5/16 3/8 3/8 Overall Length In. mm 3 2 3 6 3 3 4 2 3 4 3 4 76 51 76 152 76 76 102 51 76 102 76 102 Use 7/16” Hex Insert Bits with 7/16” Female Hex Square drive adapters,page 51. These bits feature a thru hole on the hex flat for use with a spring pin. 38 Refer to Page iv for description of Rapid Select. Socket Head Bits with Square Drive Adapters, SAE 3/4” Square Drive Part Number Adapter Only Insert Only Hex Size SC-720 SC-720 SC-720 RP-720 RP-720 RP-728 SC-720 RP-728 RP-720 RP-728 SZ-30-A SZ-31-A SZ-32-A SZ-33-A SZ-34-A SZ-37-A SZ-35-A SZ-38-A SZ-36-A SZ-39-A 3/8 1/2 9/16 5/8 3/4 3/4 7/8 7/8 1 1 Complete Part Number Adapter Only Insert Only Hex Size SZ-80 SZ-82 SZ-83 SZ-84 SZ-85 SZ-86 SZ-87 SZ-88 SZ-89 SZ-91 SZ-100 SZ-101 SZ-102 SZ-104 RP-820 RP-820 RP-828 RP-820 RP-828 RP-820 RP-828 SC-820 RP-828 RP-828 RP-848 RP-848 RP-848 RP-848 Complete SZ-30 SZ-31 SZ-32 SZ-33 SZ-34 SZ-37 SZ-35 SZ-38 SZ-36 SZ-39 A Overall Length In. mm 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 3 1/8 2 5/8 3 1/8 2 5/8 3 1/8 67 67 67 67 67 79 67 79 67 79 Length of Insert In. mm 1 9/16 1 9/16 1 9/16 1 9/16 1 9/16 2 1 9/16 2 1 9/16 2 40 40 40 40 40 51 40 51 40 51 Bit Length (A) In. mm 29/32 29/32 29/32 29/32 29/32 1 1/8 29/32 1 1/8 29/32 1 1/8 23 23 23 23 23 29 23 29 23 29 1” Square Drive A SZ-31-A SZ-32-A SZ-83-A SZ-33-A SZ-85-A SZ-34-A SZ-37-A SZ-35-A SZ-38-A SZ-39-A SZ-100-A SZ-101-A SZ-102-A SZ-104-A 1/2 9/16 9/16 5/8 5/8 3/4 3/4 7/8 7/8 1 1 1 1/4 1 1/2 1 3/4 Overall Length In. mm 3 1/16 3 1/16 3 1/4 3 1/16 3 1/4 3 1/32 3 1/4 3 1/16 3 1/4 3 1/4 3 1/16 3 1/2 3 3/4 4 1/4 78 78 83 78 83 77 83 78 83 83 78 89 95 108 Length of Insert In. mm 1 9/16 1 9/16 2 1 9/16 2 1 9/16 2 1 9/16 2 2 2 1/2 2 5/8 2 5/8 3 1/4 40 40 51 40 51 40 51 40 51 51 64 67 67 83 Bit Length (A) In. mm 29/32 29/32 1 1/8 29/32 1 1/8 29/32 1 1/8 29/32 1 1/8 1 1/8 1 3/8 1 3/8 1 3/8 2 1/32 23 23 29 23 29 23 29 23 29 29 35 35 35 51 An “RP” prefix indicates adapters with a roll pin that is inserted through the bit. Socket Head Bit and Adapter Sets APH38 APH56 8 piece, 3/8” square drive: 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8 6 piece, 1/2” square drive: 1/4, 5/16, 3/8, 1/2, 9/16, 5/8 Refer to Page iv for description of Rapid Select. 39 Socket Head Adapters & Inserts, Metric 3/8” Square Drive Complete Part Number Adapter Only Insert Only Hex Size SC-314 SC-314 SC-314 SC-314 SC-314 SZ-7-4mm SZ-7-5mm SZ-7-6mm SZ-7-8mm SZ-7-10mm 4mm 5mm 6mm 8mm 10mm SZ-3-7-4mm SZ-3-7-5mm SZ-3-7-6mm SZ-3-7-8mm SZ-3-7-10mm A Overall Length In. mm 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 Length of Insert In. mm 57 57 57 57 57 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 Bit Length (A) In. mm 35 35 35 35 35 7/8 7/8 7/8 7/8 7/8 22 22 22 22 22 1/2” Square Drive Complete SZ-5-7-3mm SZ-5-7-4mm SZ-5-7-5mm SZ-5-7-6mm SZ-5-7-8mm SZ-5-7-10mm SZ-5-7-12mm SZ-5-7-14mm SZ-5-10-14mm SZ-5-10-17mm SZ-5-10-19mm A Part Number Adapter Only Insert Only Hex Size SC-514 SC-514 SC-514 SC-514 SC-514 SC-514 SC-514 SC-514 RP-520 RP-520 RP-520 SZ-7-3mm SZ-7-4mm SZ-7-5mm SZ-7-6mm SZ-7-8mm SZ-7-10mm SZ-7-12mm SZ-7-14mm SZ-10-14mm SZ-10-17mm SZ-10-19mm 3mm 4mm 5mm 6mm 8mm 10mm 12mm 14mm 14mm 17mm 19mm Overall Length In. mm 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 63 63 63 63 63 63 63 63 63 63 63 Length of Insert In. mm 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 9/16 1 9/16 1 9/16 35 35 35 35 35 35 35 35 40 40 40 Bit Length (A) In. mm 7/8 7/8 7/8 7/8 7/8 7/8 7/8 15/16 29/32 29/32 29/32 22 22 22 22 22 22 22 24 23 23 23 3/4” Square Drive Part Number Adapter Only Complete SZ-7-10-10mm SZ-7-10-12mm SZ-7-10-14mm SZ-7-10-17mm A RP-720 RP-720 RP-720 RP-720 Insert Only SZ-10-10mm SZ-10-12mm SZ-10-14mm SZ-10-17mm Hex Size 10mm 12mm 14mm 17mm Overall Length In. mm 2 1/2 2 1/2 2 1/2 2 1/2 64 64 64 64 Length of Insert In. mm 1 9/16 1 9/16 1 9/16 1 9/16 40 40 40 40 Bit Length (A) In. mm 29/32 29/32 29/32 29/32 23 23 23 23 1” Square Drive Part Number Adapter Only Complete A SZ-8-14-17mm SZ-8-14-19mm SZ-8-14-22mm SZ-8-14-24mm SZ-8-14-27mm RP-828 RP-828 RP-828 RP-828 RP-828 Insert Only SZ-14-17mm SZ-14-19mm SZ-14-22mm SZ-14-24mm SZ-14-27mm Hex Size 17mm 19mm 22mm 24mm 27mm Overall Length In. mm 3 5/16 3 5/16 3 5/16 3 5/16 3 5/16 84 84 84 84 84 Length of Insert In. mm 2 2 2 2 2 51 51 51 51 51 Socket Head Bit and Adapter Sets APH35M APH56M 40 5 piece, 3/8” square drive: 4mm, 5mm, 6mm, 8mm, 10mm 6 piece, 1/2” square drive: 6mm, 8mm, 10mm, 12mm, 14mm, 17mm Refer to Page iv for description of Rapid Select. Bit Length (A) In. mm 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 29 29 29 29 29 Square Recess Bits 1/4” Hex Insert Bits Part Number Point Size Nominal Size In. 950-0 950-1X 950-2X 950-3 0 1 2 3 1/16 3/32 1/8 9/64 Point Size Nominal Size In. 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 1/16 1/16 1/16 3/32 3/32 3/32 3/32 1/8 1/8 1/8 1/8 9/64 9/64 9/64 9/64 Overall Length In. mm 1 1 1 1 25 25 25 25 1/4” Hex Power Drive Part Number 954-0 954-A-0 954-C-0 954-1X 954-A-1 954-B-1 954-C-1 954-2X 954-A-2X 954-B-2X 954-C-2X 954-3X 954-A-3 954-B-3 954-C-3 Overall Length In. mm 1 15/16 2 3/4 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 1 15/16 2 3/4 3 1/2 6 49 70 152 49 70 89 152 49 70 89 152 49 70 89 152 1/4” Hex Power Drive – Turned Body Part Number 1950-0 1951-0 1953-0 1950-1 1951-1 1953-1 1950-2X 1951-2X 1953-2X 1950-3 1951-3 1953-3X Point Size Nominal Size In. 0 0 0 1 1 1 2 2 2 3 3 3 1/16 1/16 1/16 3/32 3/32 3/32 1/8 1/8 1/8 9/64 9/64 9/64 Screw Size 3&4 Square Point Size 0 5, 6, 7 1 Overall Length In. mm 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 3 1/2 1 15/16 2 3/4 3 1/2 8, 9, 10 2 49 70 89 49 70 89 49 70 89 49 70 89 Turned Length In. mm 1 1/4 2 2 3/4 1 1/4 2 2 3/4 1 1/4 2 2 3/4 1 1/4 2 2 3/4 32 51 70 32 51 70 32 51 70 32 51 70 12-14 1/4 3 Quad-rex bits available upon request. Refer to Page iv for description of Rapid Select. Rapid Select bit part numbers have the heat treat code noted. 41 Clutch Head Bits 1/4” Hex Insert Bits Standard Part Number G-Type Part Number Clutch Size 190-1G 190-2G 190-3G 190-4G 190-5G 190-7G 3/32 1/8 5/32 3/16 1/4 5/16 190-1 190-2 190-3 190-4 190-5 190-7 Overall Length In. mm 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 32 32 1/4” Hex Power Drive Standard Part Number Type G power bits are available on request. Clutch Size 2122 2123 2123-A 2123-B 2124 2125 Overall Length In. mm 1/8 5/32 5/32 5/32 3/16 1/4 1 15/16 1 15/16 2 3/4 3 1/2 1 15/16 1 15/16 49 49 70 89 49 49 Male Square Inserts for Pipe Plugs 1/4” to 1/2” Male Square Part Number Male Hex In. Male Square In. In. mm P-1408 P-1409 P-1410 P-1412 P-1414 P-1416 P-1418 P-2010 P-2012 P-2014 P-2016 7/16 7/16 7/16 7/16 7/16 7/16 7/16 5/8 5/8 5/8 5/8 1/4 9/32 5/16 3/8 7/16 1/2 9/16 5/16 3/8 7/16 1/2 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 32 32 32 32 32 32 38 38 38 38 38 Note: For pipe plug inserts use SC and RP bit holders found on page 51. 42 Overall Length Torq-Set® Bits 1/4” Hex Insert Bits Part Number Point Size In. Overall Length mm 212-0 212-1 212-2 212-3 212-4 212-5 212-6 212-8 212-10 212-1/4 0 1 2 3 4 5 6 8 10 1/4 1 1 1 1 1 1 1 1 1 1 25 25 25 25 25 25 25 25 25 25 Part Number Point Size In. mm 212-6-ACR 212-8-ACR 212-10-ACR 212-1/4-ACR 6 8 10 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 Part Number Point Size In. mm 212-8A 212-10A 212-1/4A 212-5/16A 212-3/8A 8 10 1/4 5/16 3/8 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 32 1/4” Hex Insert Bits – ACR® Available with ACR® ribs for removal only Overall Length 5/16” Hex Insert Bits Overall Length 5/16” Hex Insert Bits – ACR® Available with ACR® ribs for removal only Part Number Point Size 212-1/4A-ACR 1/4 212-5/16A-ACR 5/16 Overall Length In. mm 1 1/4 1 1/4 32 32 Torq-Set® and ACR® are registered trademarks of the Phillips Screw Company. Refer to Page iv for description of Rapid Select. 43 Torq-Set® Bits 1/4” Hex Power Drive Part Number Point Size In. Overall Length mm 170-0 273A-0 273-0 273B-0 265-0 265A-0 170-1 273A-1 273-1 273B-1 265-1 265A-1 170-2 273A-2 273-2 273B-2 265-2 265A-2 170-3 273A-3 273-3 273B-3 265-3 265A-3 170-4 273A-4 273-4 273B-4 265-4 265A-4 170-5 273-5 273B-5 265-5 265A-5 170-6 170-6-ACR* 273A-6 273-6 273B-6 265-6 265A-6 170-8 170-8-ACR* 273A-8 273-8 273B-8 265-8 265A-8 170-10 170-10-ACR* 273A-10 273-10 273B-10 265-10 265A-10 170-1/4B 170-5/16B 170-3/8B 0 0 0 0 0 0 1 1 1 1 1 1 2 2 2 2 2 2 3 3 3 3 3 3 4 4 4 4 4 4 5 5 5 5 5 6 6 6 6 6 6 6 8 8 8 8 8 8 8 10 10 10 10 10 10 10 1/4 5/16 3/8 1 1/4 1 13/16 1 15/16 2 3/4 3 1/2 6 1 1/4 1 13/16 1 15/16 2 3/4 3 1/2 6 1 1/4 1 13/16 1 15/16 2 3/4 3 1/2 6 1 1/4 1 13/16 1 15/16 2 3/4 3 1/2 6 1 1/4 1 13/16 1 15/16 2 3/4 3 1/2 6 1 1/4 1 15/16 2 3/4 3 1/2 6 1 1/4 1 1/4 1 13/16 1 15/16 2 3/4 3 1/2 6 1 1/4 1 1/4 1 13/16 1 15/16 2 3/4 3 1/2 6 1 1/4 1 1/4 1 13/16 1 15/16 2 3/4 3 1/2 6 1 1/4 1 1/4 1 1/4 32 46 49 70 89 152 32 46 49 70 89 152 32 46 49 70 89 152 32 46 49 70 89 152 32 46 49 70 89 152 32 49 70 89 152 32 32 46 49 70 89 152 32 32 46 49 70 89 152 32 32 46 49 70 89 152 32 32 32 *Feature ACR® anti-camout ribs. 44 Refer to Page iv for description of Rapid Select. Torq-Set® Bits 5/16” Hex Power Drive Part Number Point Size In. Overall Length mm 170-8A 170-10A 170-1/4A 170-5/16A 170-3/8A 8 10 1/4 5/16 3/8 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 32 Part Number Point Size In. mm 170-1/4 265-1/4 265A-1/4 170-5/16 265-5/16 265A-5/16 170-3/8 170-3/8C 265A-3/8 170-7/16 170-7/16C 265-7/16 265A-7/16 1/4 1/4 1/4 5/16 5/16 5/16 3/8 3/8 3/8 7/16 7/16 7/16 7/16 1 1/4 3 1/2 6 1 1/4 3 1/2 6 1 1/4 1 1/4 6 1 1/4 1 1/4 3 1/2 6 32 89 152 32 89 152 32 32 152 32 32 89 152 7/16” Hex Power Drive Overall Length 7/16” Hex Power Drive – ACR® Available with ACR® ribs for removal only Part Number Point Size In. Overall Length mm 170-1/4-ACR 170-5/16-ACR 1/4 5/16 1 1/4 1 1/4 32 32 Part Number Point Size In. mm 170-1/2 170-9/16 170-5/8 1/4 9/16 5/8 1 1/4 1 1/4 1 1/4 32 32 32 5/8” Hex Power Drive Overall Length Torq-Set® and ACR® are registered trademarks of the Phillips Screw Company. Refer to Page iv for description of Rapid Select. 45 Tri-Wing® 1/4” Hex Insert Bits Part Number Recess Size Screw Size Tension Head Screw Size Shear Head TWD-0 TWD-1 TWD-2 TWD-3 TWD-4 TWD-5 TWD-6 TWD-7 0 1 2 3 4 5 6 7 0-80 2-56 4-40 6-32 8-32 10-32 1/4 5/16 4-40 6-32 8-32 10-32 1/4-28 5/16 3/8 Recess Size Screw Size Tension Head Screw Size Shear Head 4 5 8-32 10-32 10-32 1/4-28 Part Number Recess Size Screw Size Tension Head Screw Size Shear Head TWE-4 TWE-5 4 5 8-32 10-32 10-32 1/4-28 Part Number Recess Size Screw Size Tension Head Screw Size Shear Head TW-0 TW-1 TW-2 TW-3 TW-4 TW-5 TWB-6 TWB-7 TWB-8 0 1 2 3 4 5 6 7 8 0-80 2-56 4-40 6-32 8-32 10-32 1/4-28 5/16-24 3/8-24 4-40 6-32 8-32 10-32 1/4-28 5/16-24 3/8-24 7/16-20 Overall Length In. mm 1 1 1 1 1 1 1 1 25 25 25 25 25 25 25 25 1/4” Hex Insert Bits – ACR® Available with ACR® ribs for removal only Part Number TWD-4-ACR TWD-5-ACR Overall Length In. mm 1 1 25 25 5/16” Hex Insert Bit Overall Length In. mm 1 1/4 1 1/4 32 32 1/4” Hex Power Drive Tri-Wing® and ACR® are registered trademarks of the Phillips Screw Company. 46 Refer to Page iv for description of Rapid Select. Overall Length In. mm 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 32 32 32 32 32 Tri-Wing® 1/4” Hex Power Drive – ACR® Part Number Recess Size Screw Size Tension Head Screw Size Shear Head 5 10-32 1/4-28 Part Number Recess Size Screw Size Tension Head Screw Size Shear Head TWA-4 TWA-5 TWA-6 TWA-7 TWA-8 4 5 6 7 8 8-32 10-32 1/4-28 5/16-24 3/8-24 10-32 1/4-28 5/16-24 3/8-24 7/16-20 Recess Size Screw Size Tension Head Screw Size Shear Head 6 7 8 1/4-28 5/16-24 3/8-24 5/16-24 3/8-24 7/16-20 Part Number Recess Size Screw Size Tension Head Screw Size Shear Head TW-9 TW-10 TW-11 TW-12 TW-13 9 10 11 12 13 7/16-20 1/2-20 9/16-18 5/8-18 3/4-16 1/2-20 9/16-18 5/8-18 3/4-16 7/8-14 Part Number Recess Size Screw Size Tension Head Screw Size Shear Head TW-14 TW-15 14 15 7/8-14 1-12 1-12 - TW-5-ACR Overall Length In. mm 1 1/4 32 5/16” Hex Power Drive Overall Length In. mm 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 32 7/16” Hex Power Drive Part Number TW-6 TW-7 TW-8 Overall Length In. mm 1 1/4 1 1/4 1 1/4 32 32 32 5/8” Hex Power Drive Overall Length In. mm 1 1/4 1 1/4 1 1/4 1 1/4 2 1/2 32 32 32 32 64 3/4” Hex Power Drive Overall Length In. mm 3 3 76 76 Tri-Wing® and ACR® are registered trademarks of the Phillips Screw Company. 47 Hi-Torque® Bits 1/4” Square Drive Insert Bits Part Number HTS-0 HTS-1 HTS-2 HTS-3 HTS-4 Recess Overall Length In. Body Diameter In. Blade Thickness In. Blade Width In. 0 1 2 3 4 1 1 1 1 1 1/2 1/2 1/2 1/2 1/2 .029 .049 .059 .059 .073 .167 .274 .295 .377 .502 Body Diameter In. Blade Thickness In. Blade Width In. 3/8” Square Drive Insert Bits Part Number Recess Overall Length In. HTS-3A HTS-4A HTS-5 HTS-6 3 4 5 6 1 1 1 1/4 1 1/4 3/4 3/4 3/4 3/4 .059 .073 .079 .095 .377 .502 .629 .745 Body Diameter In. Blade Thickness In. Blade Width In. 1/2” Square Drive Insert Bits Part Number Recess Overall Length In. HTS-7 HTS-8 HTS-9 HTS-10 HTS-12 7 8 9 10 12 1 5/8 1 5/8 1 5/8 1 5/8 2 3/8 1 1 1 1/4 1 1/4 1 1/4 .112 .142 .162 .182 .216 .884 .995 1.136 1.250 1.500 Recess Overall Length In. Body Diameter In. Blade Thickness In. Blade Width In. 1 2 3 4 1 1/4 1 1/4 1 1/4 1 1/4 9/32 5/16 3/8 1/2 .049 .059 .059 .073 .274 .295 .377 .502 1/4” Hex Insert Bits Part Number HTN-B-1 HTN-B-2 HTN-B-3 HTN-B-4 Nominal Screw Size 0 Hi-Torque Recess 0 1 0 2 0 3 1 4 1 Hi-Torque®—Rudy Vaughn, Licensor 48 Refer to Page iv for description of Rapid Select. 5 1 6 1 8 2 10 3 1/4 4 5/16 5 3/8 6 7/16 1/2 9/16 5/8 7 8 9 10 3/4 12 Triple Square Bits 1/4” Hex Insert Bits Part Number 440-TSQ-4M 440-TSQ-5M 440-TSQ-6M 440-TSQ-8M 440-TSQ-10M Point Size In. Overall Length mm 4mm 5mm 6mm 8mm 10mm 1 1 1 1 1 25 25 25 25 25 Point Size In. mm 4mm 5mm 6mm 8mm 10mm 12mm 14mm 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 32 32 32 Point Size In. mm 4mm 5mm 6mm 8mm 10mm 12mm 2 2 2 2 2 2 50 50 50 50 50 50 Point Size In. mm 4mm 5mm 6mm 8mm 10mm 12mm 14mm 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 88 88 88 88 88 88 88 5/16” Hex Insert Bits Part Number 480-TSQ-4M 480-TSQ-5M 480-TSQ-6M 480-TSQ-8M 480-TSQ-10M 480-TSQ-12M 480-TSQ-14M Overall Length 1/4” Hex Power Drive Part Number 49-TSQ-4M 49-TSQ-5M 49-TSQ-6M 49-TSQ-8M 49-TSQ-10M 49-TSQ-12M Overall Length 7/16” Hex Power Drive Part Number 48-TSQ-4M 48-TSQ-5M 48-TSQ-6M 48-TSQ-8M 48-TSQ-10M 48-TSQ-12M 48-TSQ-14M Overall Length 49 Notes 50 Solutions Does Apex offer magnetic bit holders? Bit holders, like this Apex M-490, let you use a variety of insert bits in power tool applications. You get economy and flexibility – and fasteners can be magnetically held to the bit. (See page 52) Do Apex quick-release bit holders hold bits securely? A quick-release bit holder allows fast, easy insert bit changes while assuring that bits stay securely in the bit holder. Simply pull back on the knurled sleeve to release the bit. (See pages 53) Does Apex offer quick release chucks? Apex has a complete line of quick release chucks that provide fast and easy power bit changes. (See page 56) 51 Bit Holders 1/4” Hex Drive for 1/4” Hex Inserts Non-magnetic Part Number In. mm 490 490-3 490-4 490-5 490-6 490-8 490-10 2 1/8 3 4 5 6 8 10 54 76 102 127 152 203 254 M-490-2 M-490 M-497 M-490-4 M-490-6 M-490-8 M-490-10 M-490-12 M-44-90 2 2 31/32 3 3/32 4 6 8 10 12 3 1/4 51 75 79 102 152 203 254 304 83 Magnetic Magnetic Magnetic; 3/8” (9.5mm) reduced diameter Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic; for Flip-Tip™ reversible bits M-495 M-495-5 2 7/8 5 73 127 Magnetic; 3/8” (9.5mm) turned shank Magnetic; 3/8” (9.5mm) turned shank RM-490 RM-490-4 RM-490-6 2 7/8 4 6 73 102 152 Magnetic; nose piece only, #490-RN Magnetic; nose piece only, #490-RN Magnetic; nose piece only, #490-RN 2 3 51 76 Magnetic; with O-Ring retainer Magnetic; with O-Ring retainer M-490-2-OR M-490-OR 52 Overall Length Refer to Page iv for description of Rapid Select. Bit Holders 1/4” Hex Drive for 1/4” Hex Inserts, Quick Release Part Number In. QR-M-490-2 QR-M-490-A QR-M-490-A6 QR-M-490-200M Overall Length mm 2 2 29/32 6 7 7/8 51 74 152 200 Magnetic; quick release Magnetic; quick release Magnetic; quick release Magnetic; quick release 1/4” Hex Drive for 5/16” Hex Inserts Part Number In. Overall Length mm 498 M-498 2 3/8 3 1/16 60 78 Part Number In. mm 630 M-630 638 M-638 1 13/16 3 2 1/2 3 3/32 46 76 64 79 Magnetic 5/16” Hex Drive Overall Length For 1/4” hex inserts For 1/4” hex inserts; magnetic For 5/16” hex inserts For 5/16” hex inserts; magnetic 5/16” Buckeye-Desoutter for 1/4” Hex Inserts Part Number In. Overall Length mm 610 M-610 2 3 3/16 51 81 Refer to Page iv for description of Rapid Select. Magnetic 53 Bit Holders 7/16” Hex Drive Part Number 488 M-488 480 M-480 M-480-6 Overall Length In. mm 2 3/4 3 1/16 2 3/4 3 5/16 6 70 78 70 84 152 For 1/4” hex inserts For 1/4” hex inserts; magnetic For 5/16” hex inserts For 5/16” hex inserts; magnetic For 5/16” hex inserts; magnetic 9/32” 130-A Yankee Type for 1/4” Hex Inserts Part Number In. Overall Length mm 450 M-450 2 1/4 3 3/8 57 86 Magnetic 5/16” 131-A Yankee Type for 1/4” Hex Inserts Part Number In. Overall Length mm 460 M-460 2 1/4 3 3/8 57 86 Magnetic 7/32” 135-A Yankee Type for 1/4” Hex Inserts Part Number In. Overall Length mm 470 M-470 2 1/4 3 3/8 57 86 Magnetic 1/4”-20 Screw Shank for 1/4” Hex Inserts Part Number In. Overall Length mm 510 M-510 1 1/16 2 11/32 30 60 Magnetic 1/4”-24 Screw Shank for 1/4” Hex Inserts 54 Part Number In. Overall Length mm 400-BH M-400 1 1/8 2 13/32 29 61 Refer to Page iv for description of Rapid Select. Magnetic Bit Holders 1/4” Female Square Drive Part Number In. Overall Length mm 825 M-825 820 1 2 9/32 23/32 25 58 18 For 1/4” hex inserts For 1/4” hex inserts; magnetic For 1/4” square inserts 3/8” Female Square Drive Part Number In. Overall Length mm 838 M-838 835 M-835 830 1 1/2 2 23/32 1 1/2 2 3/4 1 1/2 38 69 38 70 38 For 1/4” hex inserts For 1/4” hex inserts; magnetic For 5/16” hex inserts For 5/16” hex inserts; magnetic For 5/16” square inserts 1/2” Female Square Drive Part Number In. Overall Length mm 858 M-858 855 M-855 850 1 3/4 2 3/4 1 3/4 2 3/4 1 3/4 45 70 45 70 45 For 1/4” hex inserts For 1/4” hex inserts; magnetic For 5/16” hex inserts For 5/16” hex inserts; magnetic For 5/16” square inserts Bit Holders/Adapters with Set Screw or Thru Hole C D B A E Set Screw Lock Part Number Spring Pin Retainer SC-108 SC-308 SC-508 SC-114 SC-314 SC-514 SC-614 SC-520 SC-620 SC-720 SC-820 SC-724 SC-728 SC-828 RP-314 RP-514 RP-614 RP-520 RP-620 RP-720 RP-820 RP-724 RP-728 RP-828 Spring Pin Only 21-S-156-0750 21-S-156-0937 21-S-156-0375 21-S-187-1125 21-S-187-1500 21-S-187-1375 21-S-187-1500 21-S-187-1625 21-S-187-1625 Hex Square Opening Drive (A) In. (B) In. 1/4 1/4 1/4 7/16 7/16 7/16 7/16 5/8 5/8 5/8 5/8 3/4 7/8 7/8 1/4 3/8 1/2 1/4 3/8 1/2 5/8 1/2 5/8 3/4 1 3/4 3/4 1 Overall Length (C) In. mm 1 1/4 1 1/2 1 1/2 1 1 3/8 1 5/8 1 3/4 1 1/2 1 1/2 1 11/16 2 1/8 2 2 2 1/8 32 38 38 25 35 41 46 38 38 43 54 51 51 54 Body Opening Diameter (D) Depth (E) In. mm In. mm 3/4 3/4 7/8 3/4 3/4 15/16 1 1/4 1 1/8 1 1/4 1 1/2 2 1/8 1 5/8 1 5/8 2 1/8 19 19 22 19 19 24 32 29 32 38 54 42 42 54 5/8 5/8 5/8 17/32 17/32 17/32 17/32 11/16 11/16 11/16 11/16 7/8 57/64 5/8 16 16 16 13 13 13 13 17 17 17 17 22 23 23 Note: Use SC and RP bit holders with socket head inserts (page 36) and pipe plug inserts (page 40). Can be used with power bits. Refer to Page iv for description of Rapid Select. 55 Bit Holders Female Threaded Drive, Quick Releasing Chucks Part Number QRA-08 QRA-14 QRF-08 QRF-14 QRF-20 Female Thread Hex Opening In. 3/8”-24 3/8”-24 1/2”-20 1/2”-20 1/2”-20 1/4 7/16 1/4 7/16 5/8 Overall Length In. mm 1 3/4 2 1 3/4 2 2 5/8 Overall Diameter In. mm 45 51 45 51 67 3/4 1 1/4 3/4 1 1/4 1 5/8 Opening Depth In. mm 19 32 19 32 41 61/64 1 1/16 61/64 1 1/16 1 1/2 24 27 24 27 38 Female Square Drive, Quick Releasing Chucks Part Number C D B A E F 56 QR-108 QR-308 QR-508 QR-314 QR-514 QR-614 QR-714 QR-520 QR-620 QR-720 QR-820 QR-824 Hex Square Opening Drive (A) (B) In. In. 1/4 1/4 1/4 7/16 7/16 7/16 7/16 5/8 5/8 5/8 5/8 3/4 1/4 3/8 1/2 3/8 1/2 5/8 3/4 1/2 5/8 3/4 1 1 Overall Length (C) In. mm 1 1/2 1 3/4 2 1/8 2 2 1/8 2 1/8 2 3/8 2 5/8 2 5/8 3 1/8 3 1/4 3 3/4 Refer to Page iv for description of Rapid Select. 38 45 54 51 54 54 60 67 67 79 83 95 Body Diameter (D) In. mm 3/4 3/4 7/8 1 1 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 2 1/8 2 19 19 22 25 25 32 38 38 38 38 54 51 Sleeve Diameter (E) In. mm 3/4 3/4 3/4 1 1/4 1 1/4 1 1/4 1 1/4 1 5/8 1 5/8 1 5/8 1 5/8 1 7/8 19 19 19 32 32 32 32 41 41 41 41 48 Opening Depth (F) In. mm 61/64 61/64 61/64 1 3/32 1 1/16 1 1/16 1 1/16 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 24 24 24 28 27 27 27 38 38 38 38 41 Hand Drivers Drivers with Self-Contained Insert Bits Part No. Female Hex Size Overall Length In. mm Blade Projection In. mm M-15-SC 1/4 8 1/2 216 4 3/8 M-15-SC-A 1/4 8 1/2 216 4 3/8 111 Phillips #1, #2, #3; Slotted 4F-5R, 10F-12R; hollow handle. 111 Without bits; hollow handle. Replaceable Bit Drivers Part No. 1505-P 1510-P 1555-P 1500-P 1550-P Female Hex Size 1/4 1/4 5/16 1/4 5/16 Overall Length In. mm 1 7/8 2 3/4 2 7/8 7 1/2 10 1/2 48 70 73 191 267 Blade Projection In. mm 7/8 7/8 3 9/32 6 22 22 83 152 Replaceable Bit Drivers – Magnetic Part No. M-1505-P M-1500-P M-1550-P Female Hex Size 1/4 1/4 5/16 Overall Length In. mm 2 3/8 8 1/2 10 1/2 60 216 267 Blade Projection In. mm 3/8 4 3/8 6 10 111 152 Replaceable Socket Nut Runners Part Number SW-911-P SW-911-BP SWSC-911-C* Drive Size Type Lock. 1/4” Sqr. 1/4” Sqr. 1/4” Sqr. Pin Ball Ball Overall Length In. mm 7 1/2 7 1/2 8 5/16 191 191 211 Blade Projection In. mm 3 3 3 5/8 76 76 92 *Hollow handle with 3/16, 1/4, 5/16 and 3/8 sockets. Industrial Bit Kit 24 Bit Kit Tool kit includes plastic carrying case with: Magnetic hand driver and magnetic bit holder. Phillips bits: #1,#2, #3 Slotted bits: 3F-4R, 4F-5R, 6F-8R, 8F-10R, 10F-12R Torx® bits: T-10. T-15, T-20, T-25, T-27, T-30, T-40 Square Recess bits: 3/32”, 1/8” Hex bits: 5/64”, 3/32”, 7/64”, 1/8”, 9/64” Pozidriv® bits: #1, #2 Pozidriv® is a registered trademark of the Phillips Screw Co. Torx® is a registered trademark of the Camcar Division of Textron. Refer to Page iv for description of Rapid Select. 57 Hand Drivers Torx® Keys Part Number Driver Size 71-TX-06* 71-TX-07 71-TX-08 71-TX-09 71-TX-10 71-TX-15 71-TX-20 71-TX-25 71-TX-27 71-TX-30 71-TX-40 71-TX-45 71-TX-50 71-TX-55 T-6 T-7 T-8 T-9 T-10 T-15 T-20 T-25 T-27 T-30 T-40 T-45 T-50 T-55 A Ref. A .066 .077 .090 .097 .107 .128 .151 .173 .195 .216 .260 .306 .345 .440 In. Short Arm mm 5/8 5/8 5/8 5/8 11/16 11/16 3/4 13/16 7/8 15/16 1 1/16 1 1/8 1 1/4 1 3/8 16 16 16 16 18 18 19 21 22 24 27 28 32 35 Long Arm In. mm 1 11/16 1 7/8 1 7/8 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 3/4 3 3 1/4 3 3/4 4 5/16 43 48 48 48 51 54 57 60 64 70 76 83 95 110 *T-6 key has Torx tip on short arm only. Torx® Hand Drivers 58 Part Number Driver Size 13-TX-06 13-TX-07 13-TX-08 13-TX-09 13-TX-10 13-TX-15 13-TX-20 13-TX-25 13-TX-27 13-TX-30 13-TX-40 T-6 T-7 T-8 T-9 T-10 T-15 T-20 T-25 T-27 T-30 T-40 A Ref. A 0.066 0.077 0.090 0.097 0.107 0.128 0.151 0.173 0.195 0.216 0.260 Refer to Page iv for description of Rapid Select. Overall Length In. mm 6 3/4 6 3/4 6 3/4 6 3/4 6 3/4 6 3/4 6 3/4 6 3/4 7 3/4 7 3/4 10 1/8 171 171 171 171 171 171 171 171 197 197 257 Blade Length In. mm 3 3 3 3 3 3 3 3 4 4 6 76 76 76 76 76 76 76 76 102 102 152 Hand Drivers Torq-Set® Hand Drivers Part Number Screw Size 268P-0 268P-1 268P-2 268P-3 268P-4 268P-5 268P-6 268P-8 268P-10 268P-1/4 Overall Length In. mm 0 1 2 3 4 5 6 8 10 1/4 3 3 6 1/4 6 1/4 6 1/4 6 1/4 7 1/2 7 1/2 7 1/2 10 1/8 76 76 159 159 159 159 190 190 190 257 Blade Length In. mm 1 1/4 1 1/4 3 1/8 3 1/8 3 1/8 3 1/8 4 4 4 4 32 32 79 79 79 79 102 102 102 102 Awls Part Number AW-95 AW-95-L AW-95-LL AW-375 Overall Length In. mm 7 7/16 8 8 7/8 9 Shank Diameter In. mm 189 203 225 228 .307 .307 .307 .375 7.8 7.8 7.8 9.5 Use awls to line up hole and scratch mark surfaces. Pivex™ Pivot Drivers Part Number MQR-15PV M-15PVH* M-15PVH-A Overall Length In. mm 11.8 11.7 11.7 298 296 296 1/4” Magnetic Quick-Release Bit Holder 1/4” Magnetic Bit Holder, Hollow Handle with Bits 1/4” Magnetic Bit Holder, Hollow Handle without Bits *Includes Phillips #1, 2, 3 and Slotted 4F-5R, 10F-12R bits. The Apex® Pivex™ replaceable bit hand driver has a jointed shaft that allows the handle to pivot 180°. This lets you apply five times more torque than an ordinary hand driver of the same length. Refer to Page iv for description of Rapid Select. 59 1/4” Hex Drive Nutsetters for SAE Sheet Metal Screws 6 Point Power Drive Insert Part Number 6 Point Size In. Overall Length In. Socket Nose Diameter In. DB-08 DB-10 DB-12 MDA-08 MDAT-08 MDA-10 MDA-12 MDA-14 MDB-08 MDB-10 MDB-12 MDB-14 MDC-08 MDC-10 MDC-12 1/4 5/16 3/8 1/4 1/4 5/16 3/8 7/16 1/4 5/16 3/8 7/16 1/4 5/16 3/8 2 9/16 2 9/16 2 9/16 1 3/4 1 3/4 1 3/4 1 3/4 2 2 9/16 2 9/16 2 9/16 2 9/16 2 9/16 2 9/16 2 9/16 7/16 1/2 9/16 7/16 3/8 1/2 9/16 11/16 7/16 1/2 9/16 5/8 7/16 1/2 9/16 Non-magnetic Non-magnetic Non-magnetic Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic MHM-2508 MHM-1310 MHM-1912 1/4 5/16 3/8 1 1/8 1 1/8 1 3/4 7/16 1/2 9/16 Magnetic Magnetic Magnetic 5/16” Shank Diameter 5/16” Shank Diameter 5/16” Shank Diameter 5/16” Shank Diameter 3/8” Shank Diameter 3/8” Shank Diameter 3/8” Shank Diameter 1/4” Hex Drive Nutsetters for Metric Sheet Metal Screws 6 Point Part Number 6 Point Power Drive Insert 60 Size mm Overall Length mm Socket Nose Diameter mm MDA-6mm MDA-7mm MDA-8mm MDA-10mm MDA-10mm-80m 6 7 8 10 10 44.5 44.5 44.5 44.5 80.0 9.5 11.1 12.7 14.3 14.3 Magnetic Magnetic Magnetic Magnetic Magnetic MHM-6mm MHM-7mm MHM-8mm MHM-10mm 6 7 8 10 31.8 31.8 31.8 31.8 11.1 11.1 12.7 14.3 Magnetic Magnetic Magnetic Magnetic Refer to Page iv for description of Rapid Select. 1/4” Hex Drive Nutsetters 6 Point and 6 Point Magnetic Part Number 6 Point 6N-0806-2 6N-0806-3 6N-0806-4 6N-0806-6 6N-0808-2 6N-0808-3 6N-0808-4 6N-0808-5 6N-0808-6 6N-0810-2 6N-0810-3 6N-0810-4 6N-0810-5 6N-0810-6 6N-0811-2 6N-0811-3 6N-0812-2 6N-0812-3 6N-0812-4 6N-0812-6 6N-0814-2 6N-0814-3 6N-0814-4 6N-0814-6 6N-0816-2 6N-0816-3 6N-0818-2 Part Number Magnetic M6N-0806-2 M6N-0806-3 M6N-0806-5 M6N-0806-6 M6N-0808-2 M6N-0808-3 M6N-0808-4 M6N-0808-5 M6N-0808-6 M6N-0810-2 M6N-0810-3 M6N-0810-4 M6N-0810-5 M6N-0810-6 M6N-0811-2 M6N-0811-3 M6N-0812-2 M6N-0812-3 M6N-0812-4 M6N-0812-6 M6N-0814-2 M6N-0814-3 M6N-0814-4 M6N-0814-6 M6N-0816-2 M6N-0816-3 M6N-0818-2 Refer to Page iv for description of Rapid Select. Size In. 3/16 3/16 3/16 3/16 3/16 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 5/16 11/32 11/32 3/8 3/8 3/8 3/8 7/16 7/16 7/16 7/16 1/2 1/2 9/16 Overall Length In. Socket Nose Diameter In. 2 3 4 5 6 2 3 4 5 6 2 3 4 5 6 2 3 2 3 4 6 2 3 4 6 2 3 2 5/16 5/16 5/16 5/16 5/16 7/16 7/16 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 9/16 9/16 21/32 21/32 21/32 21/32 3/4 3/4 13/16 61 1/4” Hex Drive Nutsetters 6 Point Metric Part Number 6 Point M6N-08-8M-4 M6N-08-8M-6 M6N-08-10M-4 M6N-08-10M-6 M6N-08-12M-4 M6N-08-12M-6 Size mm Overall Length mm Socket Nose Diameter mm 8 8 10 10 12 12 102 152 102 152 102 152 12.7 12.7 14.3 14.3 19.0 19.0 Magnetic Magnetic Magnetic Magnetic Magnetic Magnetic Size In. Overall Length In. Socket Nose Diameter In. Depth of Clearance (A) In. 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 5/8 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 7/16 1/2 1/2 9/16 9/16 21/32 3/4 13/16 7/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 6 Point, Bolt Clearance Part Number 6 Point A 6B-0808 6B-0809 6B-0810 6B-0811 6B-0812 6B-0814 6B-0816 6B-0818 6B-0820 See bolt clearance Tool Tip page 73. 62 7/16” Hex Drive Nutsetters 6 Point Part Number 6 Point Size In. Overall Length In. Socket Nose Diameter In. 6N-1410-3 6N-1412-2 6N-1412-3 6N-1414-3 6N-1416-3 6N-1416-4 6N-1418-3 6N-1418-4 6N-1418-6 6N-1418-8 6N-1420-3 6N-1420-6 6N-1424-3 6N-1424-6 5/16 3/8 3/8 7/16 1/2 1/2 9/16 9/16 9/16 9/16 5/8 5/8 3/4 3/4 3 2 3 3 3 4 3 4 6 8 3 6 3 6 9/16 9/16 9/16 3/4 13/16 13/16 7/8 7/8 7/8 7/8 1 1 1 1/8 1 1/8 Size In. Overall Length In. Socket Nose Diameter In. 7/8 1 1/8 4 4 1 3/8 1 5/8 5/8” Hex Drive Nutsetters 6 Point Part Number 6 Point 6N-2028-4 6N-2036-4 Refer to Page iv for description of Rapid Select. 63 Hex Extensions Male Hex Drive with 1/4” Male Square Part Number EX-250 EX-250-B EX-250-2 EX-250-B-2 EX-250-3 EX-250-B-3 EX-250-4 EX-250-B-4 EX-250-5 EX-250-B-5 EX-250-6 EX-250-B-6 EX-250-8 EX-250-B-8 EX-250-12 EX-250-B-12 EX-262 EX-262-B EX-262-2 EX-262-B-2 EX-262-3 EX-262-4 EX-262-B-4 EX-262-6 EX-262-B-6 EX-251 EX-251-B EX-251-2 EX-251-B-2 EX-251-3 EX-251-B-3 EX-251-4 EX-251-B-4 EX-251-6 EX-251-8 EX-251-10 64 Hex Drive In. Type of Lock 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Pin Pin Refer to Page iv for description of Rapid Select. Overall Length In. mm 1 3/8 1 3/8 2 2 3 3 4 4 5 5 6 6 8 8 12 12 1 1/2 1 1/2 2 2 3 4 4 6 6 1 3/8 1 3/8 2 2 3 3 4 4 6 8 10 35 35 51 51 76 76 102 102 127 127 152 152 203 203 305 305 38 38 51 51 76 102 102 152 152 35 35 51 51 76 76 102 102 152 203 254 Hex Extensions Male Hex Drive with 3/8” Male Square Part Number EX-370 EX-370-B EX-370-2 EX-370-B-2 EX-370-3 EX-370-B-3 EX-370-4 EX-370-B-4 EX-370-5 EX-370-6 EX-370-B-6 EX-370-8 EX-370-B-8 EX-370-10 EX-370-B-10 EX-380 EX-380-B EX-380-2 EX-380-B-2 EX-380-3 EX-380-4 EX-380-6 EX-371 EX-371-B EX-371-2 EX-371-B-2 EX-371-2 3/4 EX-371-3 EX-371-B-3 EX-371-4 EX-371-B-4 EX-371-5 EX-371-6 EX-371-B-6 EX-371-8 EX-371-10 EX-371-12 EX-371-15 Hex Drive In. Type of Lock 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 5/16 5/16 5/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 Pin Ball Pin Ball Pin Ball Pin Ball Pin Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Pin Pin Pin Ball Pin Ball Pin Pin Ball Pin Ball Pin Pin Ball Pin Pin Pin Pin Refer to Page iv for description of Rapid Select. Overall Length In. mm 1 5/8 1 5/8 2 2 3 3 4 4 5 6 6 8 8 10 10 1 1/2 1 1/2 2 2 3 4 6 1 3/4 1 3/4 2 2 2 3/4 3 3 4 4 5 6 6 8 10 12 15 41 41 51 51 76 76 102 102 127 152 152 203 203 254 254 38 38 51 51 76 102 152 45 45 51 51 70 76 76 102 102 127 152 152 203 254 305 381 65 Hex Extensions Male Hex Drive with 1/2” Male Square Part Number EX-500-2 EX-500-B-2 EX-500-3 EX-500-B-3 EX-500-4 EX-500B-4 EX-500-6 EX-500-B-6 EX-512-2 EX-512-B-2 EX-512-3 EX-512-B-4 EX-501-2 EX-501-B-2 EX-501-3 EX-501-B-3 EX-501-4 EX-501-B-4 EX-501-5 EX-501-B-5 EX-501-6 EX-501-B-6 EX-501-8 EX-501-B-8 EX-501-10 EX-501-B-10 EX-501-12 EX-501-B-12 EX-501-15 EX-502 EX-502-B EX-502-3 EX-502-B-3 EX-502-4 EX-502-B-4 EX-502-5 EX-502-6 EX-502-8 66 Hex Drive In. Type of Lock 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Pin Ball Pin Ball Pin Ball Pin Pin Pin Refer to Page iv for description of Rapid Select. Overall Length In. mm 2 2 3 3 4 4 6 6 2 2 3 4 2 1/8 2 1/8 3 3 4 4 5 5 6 6 8 8 10 10 12 12 15 2 2 3 3 4 4 5 6 8 51 51 76 76 102 102 152 152 51 51 76 102 54 54 76 76 102 102 127 127 152 152 203 203 254 254 305 305 381 51 51 76 76 102 102 127 152 203 Extensions Male Hex Drive with 5/8” Male Square Part Number Hex Drive In. Type of Lock 7/16 7/16 5/8 5/8 5/8 5/8 5/8 Pin Pin Pin Ball Pin Pin Pin EX-620-3 EX-620-6 EX-621-3 EX-621-B-3 EX-621-4 EX-621-6 EX-621-8 Overall Length In. mm 3 6 3 3 4 6 8 76 152 76 76 102 152 203 Male Hex Drive with 3/4” Male Square Part Number Hex Drive In. Type of Lock 7/16 7/16 5/8 5/8 5/8 5/8 5/8 3/4 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole 7/32 Drill Hole EX-757-3 EX-757-B-3 EX-758-4 EX-758-B-4 EX-758-6 EX-758-B-6 EX-758-9 EX-759-4 Overall Length In. mm 3 3 4 4 6 6 9 4 76 76 102 102 152 152 229 102 Threaded Screw Shank Part Number Male Square In. Male Thread In. TH-256 TH-376 TH-250 TH-370 TH-252 TH-372 TH-254 1/4 3/8 1/4 3/8 1/4 3/8 1/4 1/4-28 1/4-28 1/4-24 1/4-24 1/4-20 1/4-20 10-32 Overall Length In. mm 1 5/8 1 5/8 1 5/8 1 3/4 1 3/4 1 3/4 1 3/4 41 41 41 45 45 45 45 Body Diameter In. mm 7/16 1/2 7/16 1/2 7/16 1/2 3/8 11 13 11 13 11 13 10 Morse Taper Shank Part Number Male Square In. Morse Taper Type of Lock MT-503 MT-752 MT-753 MT-754 1/2 3/4 3/4 3/4 3 2 3 4 Pin 7/32 Drill Hole 7/32 Drill Hole 7/32 Drill Hole Overall Length In. mm 6 6 6 7 152 152 152 178 67 1/4” Male Hex Universal Wrenches, SAE 6 Point, Standard and Tension Type – Extension Part Number Standard Standard Type Tension Type A E B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 68 DC KC-25-3 KC-25-4 KC-25-6 KC-25-9 KC-25-12 KC-26-3 KC-26-4 KC-26-6 KC-26-9 KC-26-12 KC-100-3 KC-100-6 KC-100-12 KC-27-3 KC-27-6 KC-27-12 KC-101-3 KC-101-6 KC-28-3 KC-28-4 KC-28-6 KC-28-9 KC-28-12 KC-102-3 KC-102-6 KC-102-9 KC-29-3 KC-29-6 KC-29-12 KC-103-3 KC-103-6 KC-103-9 KC-30-3 KC-30-4 KC-30-6 KC-30-9 KC-104-3 KC-104-6 KC-104-9 KC-104-12 Part Number Tension Hex Opening In. KS-25-6 KS-25-9 KS-25-12 KS-26-6 KS-26-9 KS-26-12 KS-100-6 KS-100-9 KS-27-6 KS-101-6 KS-28-6 KS-28-9 KS-28-12 KS-102-6 KS-102-9 KS-29-6 KS-29-9 KS-103-6 KS-103-9 KS-30-6 KS-30-9 KS-30-12 KS-104-6 KS-104-9 - 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 5/16 11/32 11/32 11/32 11/32 11/32 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 7/16 7/16 7/16 7/16 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Refer to Page iv for description of Rapid Select. Shank Length (A) In. 3 4 6 9 12 3 4 6 9 12 3 6 9 12 3 6 12 3 6 3 4 6 9 12 3 6 9 3 6 9 12 3 6 9 3 4 6 9 12 3 6 9 12 Socket Length (B) In. 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 7/8 7/8 7/8 7/8 15/16 15/16 15/16 7/8 7/8 7/8 7/8 7/8 1 1 1 1 Socket Diameter (C) In. Nose End Diameter (D) In. Clearance Depth (E) In. 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 3/4 3/4 5/8 5/8 5/8 3/4 3/4 5/8 5/8 5/8 5/8 5/8 3/4 3/4 3/4 5/8 5/8 5/8 5/8 3/4 3/4 3/4 11/16 11/16 11/16 11/16 11/16 3/4 3/4 3/4 3/4 3/8 3/8 3/8 3/8 3/8 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 1/2 1/2 1/2 15/32 15/32 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 5/8 5/8 5/8 5/8 5/8 5/8 5/8 11/16 11/16 11/16 11/16 11/16 3/4 3/4 3/4 3/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 5/16 5/16 5/16 5/16 3/8 3/8 3/8 5/16 5/16 7/16 7/16 7/16 7/16 7/16 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 1/4” Male Hex Universal Wrenches, SAE 6 Point, Standard and Tension Type – Extension (continued) Part Number Standard KC-105-3 KC-105-4 KC-105-6 KC-105-9 KC-105-12 Standard Type Tension Type A Part Number Tension Hex Opening In. KS-105-6 KS-105-9 - 9/16 9/16 9/16 9/16 9/16 Shank Length (A) In. 3 4 6 9 12 Socket Length (B) In. 1 1 1 1 1 Socket Diameter (C) In. Nose End Diameter (D) In. Clearance Depth (E) In. 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 9/16 9/16 9/16 9/16 9/16 Socket Diameter (C) mm Nose End Diameter (D) mm Clearance Depth (E) mm 15.9 15.9 15.9 15.9 15.9 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 191. 19.1 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 10.3 10.3 10.3 10.3 10.3 11.1 11.1 11.1 11.1 12.7 12.7 15.1 15.1 15.1 15.1 15.1 15.9 15.9 15.9 17.5 17.5 17.5 17.5 17.5 17.5 17.5 9.5 9.5 9.5 9.5 9.5 7.9 7.9 7.9 7.9 7.9 7.9 9.5 9.5 9.5 9.5 9.5 10.3 10.3 10.3 10.3 10.3 10.3 11.9 11.9 11.9 11.9 E DC B 1/4” Male Hex Universal Wrenches, Metric 6 Point, Standard and Tension Type – Extension Part Number Standard Standard Type Tension Type A E B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. DC KC-5-7m-3 KC-5-7m-4 KC-5-7m-6 KC-5-7m-9 KC-6-8m-3 KC-6-8m-4 KC-6-8m-6 KC-6-8m-9 KC-6-9m-3 KC-6-9m-6 KC-6-10m-3 KC-6-10m-4 KC-6-10m-6 KC-6-10m-9 KC-6-10m-12 KC-7-11m-3 KC-7-11m-6 KC-7-11m-9 KC-7-12m-3 KC-7-12m-6 KC-7-12m-9 KC-7-13m-3 KC-7-13m-6 KC-7-13m-9 - Part Number Tension Hex Opening mm KS-5-7m-6 KS-5-7m-9 KS-5-7m-12 KS-6-8m-6 KS-6-8m-9 KS-6-10m-6 KS-6-10m-9 KS-7-11m-6 KS-7-11m-9 KS-7-13m-6 KS-7-13m-9 KS-7-13m-12 7 7 7 7 7 8 8 8 8 9 9 10 10 10 10 10 11 11 11 12 12 12 13 13 13 13 Refer to Page iv for description of Rapid Select. Shank Length (A) mm Socket Length (B) mm 76 102 152 229 305 76 102 152 229 76 152 76 102 152 229 305 76 152 229 76 152 229 76 152 229 305 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 20.6 20.6 20.6 20.6 20.6 23.8 23.8 23.8 23.8 23.8 23.8 25.4 25.4 25.4 25.4 69 7/16” Hex Drive Universal Wrenches, SAE 6 Point, Standard and Tension Type – Extension Part Number Standard Standard Type Tension Type A E B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 70 DC KB-40-3 KB-40-4 KB-40-6 KB-40-9 KB-43-3 KB-43-4 KB-43-6 KB-44-3 KB-44-4 KB-44-6 KB-44-9 KB-44-12 KB-45-3 KB-45-4 KB-45-6 KB-45-9 KB-45-12 KB-104-6 KB-104-9 KB-202-4 KB-202-6 KB-202-12 KB-317-3 KB-317-6 KB-317-9 KB-105-3 KB-105-4 KB-105-6 KB-105-12 KB-203-3 KB-203-6 KB-203-9 KB-203-12 KB-318-3 Part Number Tension Hex Opening In. KT-40-6 KT-40-9 KT-43-6 KT-43-9 KT-44-6 KT-44-9 KT-44-12 KT-45-6 KT-45-9 KT-45-12 KT-104-6 KT-104-9 KT-202-6 KT-202-9 KT-202-12 KT-317-6 KT-317-9 KT-105-6 KT-105-9 KT-105-12 KT-203-6 KT-203-9 KT-203-12 KT-318-3 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 7/16 7/16 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 Refer to Page iv for description of Rapid Select. Shank Length (A) In. 3 4 6 9 3 4 6 9 3 4 6 9 12 3 4 6 9 12 6 9 4 6 9 12 3 6 9 3 4 6 9 12 3 6 9 12 3 Socket Length (B) In. 3/4 3/4 3/4 3/4 13/16 13/16 13/16 13/16 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1/16 1 1/16 1 1/16 1 1/16 1 1/8 Socket Diameter (C) In. Nose End Diameter (D) In. Clearance Depth (E) In. 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 11/16 11/16 11/16 11/16 11/16 3/4 3/4 7/8 7/8 7/8 7/8 1 1 1 13/16 13/16 13/16 13/16 13/16 7/8 7/8 7/8 7/8 1 3/8 3/8 3/8 3/8 7/32 7/32 7/32 7/32 5/8 5/8 5/8 5/8 5/8 11/16 11/16 11/16 11/16 11/16 3/4 3/4 11/16 11/16 11/16 11/16 11/16 11/16 11/16 13/16 13/16 13/16 13/16 13/16 3/4 3/4 3/4 3/4 3/4 3/8 3/8 3/8 3/8 7/16 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 9/16 15/32 15/32 15/32 15/32 7/16 7/16 7/16 9/16 9/16 9/16 9/16 9/16 17/32 17/32 17/32 17/32 9/16 7/16” Hex Drive Universal Wrenches, SAE 6 Point, Standard and Tension Type – Extension (continued) Part Number Standard Standard Type Tension Type A E DC B KB-318-6 KB-318-9 KB-318-12 KB-205-3 KB-205-4 KB-205-6 KB-205-9 KB-205-12 KB-320-3 KB-320-4 KB-320-6 KB-320-9 KB-320-12 KB-321-3 KB-321-6 KB-321-9 KB-321-12 KB-322-3 KB-322-4 KB-322-6 KB-322-9 KB-322-12 Part Number Tension Hex Opening In. KT-318-6 KT-318-9 KT-318-12 KT-205-6 KT-205-12 KT-320-6 KT-320-9 KT-320-12 KT-321-6 KT-321-9 KT-321-12 KT-322-6 KT-322-9 KT-322-12 9/16 9/16 9/16 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 11/16 11/16 11/16 11/16 3/4 3/4 3/4 3/4 3/4 Shank Length (A) In. 6 9 12 3 4 6 9 12 3 4 6 9 12 3 6 9 12 3 4 6 9 12 Socket Length (B) In. 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 3/16 1 3/16 1 3/16 1 3/16 1 3/16 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 Socket Diameter (C) In. Nose End Diameter (D) In. Clearance Depth (E) In. 1 1 1 7/8 7/8 7/8 7/8 7/8 1 1 1 1 1 1 1 1 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 3/4 3/4 3/4 7/8 7/8 7/8 7/8 7/8 27/32 27/32 27/32 27/32 27/32 1 1 1 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 9/16 9/16 9/16 19/32 19/32 19/32 19/32 19/32 5/8 5/8 5/8 5/8 5/8 11/16 11/16 11/16 11/16 11/16 11/16 11/16 11/16 11/16 7/16” Hex Drive Universal Wrenches, Metric 6 Point, Standard and Tension Type– Extension Part Number Standard Part Number Tension Hex Opening mm Shank Length (A) mm Socket Length (B) mm 76 152 229 305 76 102 152 305 20.6 20.6 20.6 20.6 23.8 23.8 23.8 23.8 Socket Diameter (C) mm Nose End Diameter (D) mm Clearance Depth (E) mm 19.1 19.1 19.1 19.1 22.2 22.2 22.2 22.2 15.1 15.1 15.1 15.1 15.9 15.9 15.9 15.9 9.5 9.5 9.5 9.5 10.3 10.3 10.3 10.3 Standard Type Tension Type A E B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. DC KB-6-10m-3 KB-6-10m-6 KT-6-10m-6 KB-6-10m-9 KT-6-10m-9 KT-6-10m-12 KB-7-11m-3 KB-7-11m-4 KB-7-11m-6 KT-7-11m-6 KB-7-11m-12 - 10 10 10 10 11 11 11 11 Refer to Page iv for description of Rapid Select. 71 7/16” Hex Drive Universal Wrenches, Metric 6 Point, Standard and Tension Type – Extension (continued) Part Number Standard Standard Type Tension Type A E B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 72 DC KB-7-12m-6 KB-7-12m-9 KB-7-13m-3 KB-7-13m-4 KB-7-13m-6 KB-7-13m-9 KB-7-13m-12 KB-7-14m-3 KB-7-14m-4 KB-7-14m-6 KB-7-14m-9 KB-8-15m-6 KB-8-15m-9 KB-8-15m-12 KB-8-16m-3 KB-8-16m-6 KB-8-16m-9 KB-8-17m-12 KB-8-17m-3 KB-8-17m-6 KB-8-17m-9 KB-8-17m-12 KB-8-18m-3 KB-8-18m-6 KB-8-18m-9 KB-8-18m-12 KB-10-19m-3 KB-10-19m-6 KB-10-19m-9 - Part Number Tension KT-7-13m-6 KT-7-13m-9 KT-7-14m-6 KT-7-14m-9 KT-7-14m-12 KT-7-15m-6 KT-7-15m-8 KT-8-15m-6 KT-8-15m-9 KT-8-15m-12 KT-8-16m-6 KT-8-16m-9 KT-8-16m-12 KT-8-17m-6 KT-8-13m-9 KT-8-13m-12 KT-8-18m-6 KT-8-18m-9 KT-8-18m-12 KT-10-19m-6 KT-10-19m-12 Hex Opening mm Shank Length (A) mm Socket Length (B) mm Socket Diameter (C) mm Nose End Diameter (D) mm Clearance Depth (E) mm 12 12 13 13 13 13 13 14 14 14 14 14 15 15 15 15 15 16 16 16 16 17 17 17 17 18 18 18 18 19 19 19 19 152 229 76 102 152 229 305 76 102 152 229 305 152 204 152 229 305 76 152 229 305 76 152 229 305 76 152 229 305 76 152 229 305 23.8 23.8 25.4 25.4 25.4 25.4 25.4 27.0 27.0 27.0 27.0 27.0 27.0 27.0 28.6 28.6 28.6 30.2 30.2 30.2 30.2 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 34.9 34.9 34.9 34.9 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25. 25.4 31.8 31.8 31.8 31.8 17.5 17.5 17.5 17.5 17.5 17.5 17.5 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.8 19.8 19.8 21.4 21.4 21.4 21.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 26.2 26.2 26.2 26.2 10.3 10.3 11.9 11.9 11.9 11.9 11.9 13.5 13.5 13.5 14.3 14.3 14.3 14.3 14.3 14.3 14.3 15.9 15.9 15.9 15.9 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 16.3 16.3 16.3 16.3 Notes 73 Solutions When can I use a universal adapter? A universal adapter gives all of your sockets the versatility of a universal wrench. Universal adapters must not be used with impact drivers. Does Apex offer bolt clearance nutsetters? Bolt clearance nutsetters allow the bolt or stud to recess into the nutsetter body as the nut is driven down. Bolt clearance nutsetters are prefixed with the numbers 6B-. (See page 62.) (See page 83.) Does Apex offer Torx® sockets? Like Torx® screws, Torx® bolts are becoming commonplace in a variety of assembly applications. Apex offers a wide variety of Torx® sockets. (See page 82.) Does Apex universal wrenches with longer sockets? Universal wrenches are available with a longer socket to allow a stud to recess into the socket opening. (Check with your Apex representative for details.) 74 What is the advantage of surface drive sockets? Use surface drive sockets if tools are still running when they engage the fasteners (such as on this multi-spindle machine). They’re easier to engage and will result in less tool wear. What is the benefit of a tension sleeve? A universal wrench with a tension sleeve holds the socket at the desired driving angle while aligning the tool and fastener. Other universal wrench sockets can “flop” making engagement difficult. Tension Type Standard Type What types of magnetic sockets does Apex offer? In addition to a fixed magnet socket (center), Apex offers spring-loaded (left) and cylindrical (right) magnet styles that allow the bolt to recess into the socket body as the nut is driven down. Fixed magnet sockets are designated by a M- part number prefix, springloaded by MBprefix and cylindrical by a SM- prefix. Does Apex offer thin wall sockets? Thin wall sockets accommodate countersunk or limited clearance nut or bolt locations. Many of these sockets have a shouldered body design that can fit in tight quarters. Does Apex offer mar resistant bits and sockets? Does Apex offer a complete line of extensions? Apex features a wide selection of extension lengths, styles and sizes. (See the Table of Contents for a complete listing.) Apex can nylon coat just about any of our bits or sockets. Nylon offers excellent mar resistance for assemblies that have painted, varnished or chromed surfaces. Nylon also offers some safety benefits by covering tool junctions. Contact your Apex distributor or representative for more information or for a quote. Can I use my extensions, adapters and universals with impact drivers? Quality design and construction give Apex universal wrenches a long service life and durability. Remember, universal wrenches, extensions and adapters are not to be used with impact drivers. 75 In this section... Impact Sockets Apex industrial grade impact sockets are available in a wide range of lengths and wall thicknesses, and with single or double hex openings. Square openings are available in select sizes. Fixed Magnetic Sockets Magnetic sockets hold the fastener in driving position, even when working straight down. Time-wasting motions are eliminated when starting fasteners or working in hard-to-reach areas. These sockets are identified with a M- prefix. Magnetic Bolt Clearance Sockets As the nut is run down, a spring-loaded or hollow cylinder magnet allows the bolt or stud to retract into the socket body. Nuts are held firmly in the socket. These sockets are identified with a MB- prefix. Surface Drive Sockets Large openings on the six corners of the opening create a “floating” action that allows the socket to slip quickly and easily onto the nut or bolt. Ideal for compensating for imperfect alignment between the tool and fastener. Not generally recommended for impact use. These sockets are identified with a SF- prefix. Fast Lead Sockets Designed for power tool and multiple spindle power tools, a specially tapered opening provides complete engagement with the nut almost instantly upon engagement. This speeds productivity and extends tool life. Engagement is possible without starting and stopping the tool for each nut. These sockets are identified with a FL- prefix. Special Sockets You’ll find Spline, Torx®, tap holding, Budd Wheel, grease fitting and other sockets for special applications. Extensions and Adapters Apex provides the accessories needed to adapt sockets to nearly every tool and application. Square Drive Universal Wrenches Hard-to-reach areas are no problem with Apex’s wide range of universal and extension universal wrenches. 76 1/4” Square Drive Sockets, SAE Standard Length, 6 Point and Double Hex A C inches B D Part Number 6 Point Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 1105 1106 1107 1108 X-1108* 1109 1110 X-1110* HA-510 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1106-D 1107-D 1108-D 1109-D 1110-D 1111-D 1112-D 1113-D 1114-D 1116-D 1117-D 1118-D 1119-D 1120-D 5/32 3/16 7/32 1/4 1/4 9/32 5/16 5/16 5/16 11/32 3/8 13/32 7/16 15/32 1/2 17/32 9/16 19/32 5/8 7/8 7/8 7/8 7/8 7/8 1 1 1 7/8 1 1 1 1 1 1 1 1 1 1 1/4 5/16 3/8 3/8 3/8 7/16 1/2 1/2 7/16 1/2 9/16 5/8 5/8 11/16 11/16 3/4 13/16 7/8 7/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 7/16 1/2 9/16 5/8 5/8 11/16 11/16 3/4 13/16 7/8 7/8 3/32 3/32 5/32 5/32 5/32 3/16 3/16 3/16 3/16 3/16 1/4 1/4 9/32 9/32 11/32 11/32 7/16 7/16 7/16 * Parts have a harder heat treat. Long Length, 6 Point and Double Hex Part Number 6 Point A C B inches D 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1220 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 1206-D 1207-D 1208-D 1209-D 1210-D 1211-D 1212-D 1214-D 1216-D 1218-D - 3/16 7/32 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2 17/32 9/16 5/8 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 2 5/16 3/8 3/8 7/16 1/2 1/2 9/16 5/8 5/8 11/16 11/16 3/4 13/16 7/8 1/2 1/2 1/2 1/2 1/2 1/2 9/16 5/8 5/8 11/16 11/16 3/4 13/16 7/8 3/32 5/32 5/32 3/16 3/16 3/16 1/4 1/4 9/32 9/32 11/32 11/32 7/16 7/16 Refer to Page iv for description of Rapid Select. 77 1/4” Square Drive Sockets, SAE Extra Long Length, 6 Point and Double Hex Part Number 6 Point A C B inches D 1308 1310 1311 1312 1313 1314 1316 1318 1320 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 1308-D 1310-D 1311-D 1312-D 1313-D 1314-D 1316-D 1320-D 1/4 5/16 11/32 3/8 13/32 7/16 1/2 9/16 5/8 3 3 3 3 3 3 3 3 3 3/8 1/2 1/2 9/16 9/16 5/8 11/16 13/16 7/8 1/2 1/2 1/2 9/16 9/16 5/8 11/16 13/16 7/8 5/32 3/16 3/16 1/4 1/4 9/32 11/32 7/16 7/16 Magnetic, Standard Length, 6 Point A C B inches D Part Number Fixed Magnet Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) M-1105 M-1106 M-1107 MX-1108* M-1108-E* MX-1109* MHA-510 M-1110 MX-1110* MX-1111 MHA-510 M-1112 MX-1112* M-1114 M-1116 M-1118 M-1120 5/32 3/16 7/32 1/4 1/4 9/32 5/16 5/16 5/16 11/32 5/16 3/8 3/8 7/16 1/2 9/16 5/8 7/8 7/8 7/8 7/8 7/8 1 7/8 1 1 1 7/8 1 1 1 1 1 1 5/16 5/16 3/8 3/8 3/8 7/16 7/16 1/2 1/2 1/2 7/16 9/16 9/16 5/8 11/16 11/16 11/16 1/2 1/2 1/2 1/2 1/2 1/2 7/16 1/2 1/2 1/2 7/16 9/16 9/16 5/8 11/16 11/16 11/16 3/32 3/32 5/32 5/32 5/32 3/16 1/8 3/16 3/16 3/16 3/16 1/4 1/4 9/32 11/32 11/32 11/32 Diameter Drive End (C) Opening Depth (D) *Parts have a harder heat treat; MX-1108-E has no lead-in chamfer. 1/4” Square Drive Sockets, SAE Magnetic, Long and Extra Long Length, 6 Point Part No. Fixed Magnet Part No. Magnetic Bolt Clearance Hex Opening In. Overall Length (A) Diameter Nose End (B) M-1208 M-1209 M-1210 MB-1206 MB-1208 MB-1308 MB-1209 MB-1210 3/16 1/4 1/4 9/32 5/16 1 3/4 1 3/4 3 1 3/4 1 3/4 5/16 3/8 3/8 7/16 1/2 (Continued on next page.) 78 Refer to Page iv for description of Rapid Select. 1/2 1/2 1/2 1/2 1/2 5/32 5/32 5/32 3/16 3/16 1/4” Square Drive Sockets, SAE Magnetic, Long Length and Extra Long, 6 Point Part No. Fixed Magnet A C B inches D M-1211 M-1212 M-1214 M-1216 - Part No. Magnetic Bolt Clearance Hex Opening In. Overall Length (A) Diameter Nose End (B) MB-1211 MB-1311 MB-1212 MB-1312 MB-1214 MB-1314 MB-1216 MB-1218 11/32 11/32 3/8 3/8 7/16 7/16 1/2 9/16 1 3/4 3 1 3/4 3 1 3/4 3 1 3/4 1 3/4 1/2 1/2 9/16 9/16 5/8 5/8 11/16 13/16 Diameter Drive End (C) Opening Depth (D) 1/2 1/2 9/16 9/16 5/8 5/8 11/16 13/16 3/16 3/16 1/4 1/4 9/32 9/32 11/32 7/16 Diameter Drive End (C) Opening Depth (D) * For explanation of magnets, see Tool Tip on page 120. Surface Drive and Fast Lead, Standard and Long Length A C B inches D Part No. Surface Drive Part No. Number Fast Lead Hex Opening In. Overall Length (A) Diameter Nose End (B) SF-1112 SF-1212 SF-1114 SF-1116 SF-1118 FL-1108 FL-1109 FL-1110 FL-1111 FL-1112 FL-1212 FL-1114 FL-1214 FL-1116 FL-1216 FL-1118 1/4 9/32 5/16 11/32 3/8 3/8 7/16 7/16 1/2 1/2 9/16 7/8 7/8 1 1 1 1 3/4 1 1 3/4 1 1 3/4 1 3/8 3/8 1/2 1/2 9/16 9/16 5/8 5/8 11/16 11/16 13/16 1/2 1/2 1/2 1/2 9/16 9/16 5/8 5/8 11/16 11/16 13/16 5/32 5/32 3/16 3/16 1/4 1/4 9/32 9/32 11/32 11/32 7/16 1/4” Square Drive Sockets For SAE Sheet Metal Screws 6 Point and 6 Point Magnetic, For Predrilled Holes* Part Number 6 Point A C B inches D 1E06 1E07 1E08 1E09 1E10 1E11 1E12 1E14 1E16 Part Number Magnetic Hex Opening In. Overall Length (A) Diameter Nose End (B) M1E06 M1E07 M1E08 M1E09 M1E10 M1E11 M1E12 M1E14 M1E16 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 7/8 7/8 7/8 7/8 7/8 1 1 1 1 5/16 3/8 3/8 7/16 1/2 1/2 5/8 11/16 11/16 Diameter Drive End (C) Opening Depth (D) 1/2 1/2 1/2 1/2 1/2 1/2 5/8 11/16 11/16 3/32 5/32 5/32 3/16 3/16 3/16 1/4 9/32 11/32 *Sockets for predrilled holes are intermediate hardness; sockets for self-drilling and tapping screws are maximum hardness. Refer to Page iv for description of Rapid Select. 79 1/4” Square Drive Sockets For SAE Sheet Metal Screws 6 Point and 6 Point Magnetic, for Self-Drilling and Tapping Screws* A C B inches D Part Number 6 Point Part Number Magnetic Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 1P06 1P07 1P08 M1P06 M1P07 M1P08 M1P09 M1P10 M1P11 M1P12 M1P14 M1P16 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 7/8 7/8 7/8 7/8 7/8 1 1 1 1 5/16 3/8 7/16 1/2 1/2 1/2 5/8 11/16 11/16 1/2 1/2 1/2 1/2 1/2 1/2 5/8 11/16 11/16 3/32 5/32 5/32 3/16 3/16 3/16 1/4 9/32 11/32 1P10 1P11 1P12 1P14 1P16 *Sockets for predrilled holes are intermediate hardness; sockets for self-drilling and tapping screws are maximum hardness. 1/4” Square Drive Sockets For SAE Square Nuts Single Square and Double Square A C inches B D Part Number Square Part No. Double Square Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 1608 1609 1610 1611 1612 1614 1608-D 1609-D 1610-D 1612-D 1614-D 1/4 9/32 5/16 11/32 3/8 7/16 1 1 1 1 1 1 1/2 9/16 5/8 3/4 3/4 13/16 1/2 9/16 5/8 3/4 3/4 13/16 3/16 3/16 1/4 1/4 1/4 9/32 1/4” Square Drive Universal Wrenches, SAE 6 Point and Double Hex A E D C B 80 Part Number 6 Point Part Number Double Hex Hex Opening In. Overall Length (A) Socket Length (B) Socket Diameter (C) Nose End Diameter (D) Clearance Depth (E) SA-25 SA-26 SA-28 SA-29 SA-30 SA-65 SA-25-D SA-26-D SA-28-D SA-29-D SA-30-D - 1/4 5/16 3/8 7/16 1/2 9/16 1 7/32 1 17/32 1 19/32 1 21/32 1 21/32 1 21/32 3/4 3/4 13/16 7/8 7/8 7/8 5/8 5/8 5/8 5/8 11/16 11/16 3/8 7/16 17/32 5/8 11/16 11/16 3/8 3/8 7/16 1/2 1/2 1/2 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. Refer to Page iv for description of Rapid Select. 1/4” Square Drive Sockets, Metric Standard Length, 6 Point and Double Hex Part Number 6 Point 3.5mm11 4mm11 4.5mm11 5mm11 5.5mm11 6mm11 7mm11 8mm11 9mm11 10mm11 OS-10mm11 11mm11 12mm11 13mm11 14mm11 15mm11 16mm11 A mm C B D Part Number Double Hex Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 6mm11-D 7mm11-D 8mm11-D 9mm11-D 10mm11-D 11mm11-D 12mm11-D 13mm11-D 14mm11-D 15mm11-D - 3.5 4 4.5 5 5.5 6 7 8 9 10 10 11 12 13 14 15 16 22.2 22.2 22.2 22.2 22.2 22.2 22.2 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 6.4 6.4 7.9 8.7 9.5 9.5 11.1 12.7 14.3 15.9 14.3 15.9 17.5 19.1 20.6 22.2 22.2 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 14.3 15.9 14.3 15.9 17.5 19.1 20.6 22.2 22.2 2.4 2.4 2.4 3.9 3.9 3.9 4.8 4.8 4.8 6.4 6.4 7.2 7.2 8.7 11.1 11.1 11.1 Long Length, 6 Point and Double Hex Part Number 6 Point A C mm B D 5mm21 5.5mm21 6mm21 7mm21 8mm21 9mm21 10mm21 11mm21 12mm21 13mm21 14mm21 15mm21 16mm21 Part Number Double Hex Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 7mm21-D 8mm21-D 9mm21-D 10mm21-D 11mm21-D 12mm21-D 13mm21-D 15mm21-D - 5 5.5 6 7 8 9 10 11 12 13 14 15 16 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 50.8 50.8 8.7 9.5 9.5 11.1 12.7 14.3 15.9 15.9 17.5 19.1 20.6 22.2 22.2 12.7 12.7 12.7 12.7 12.7 14.3 15.9 15.9 17.5 19.1 20.6 22.2 22.2 3.9 3.9 3.9 4.8 4.8 4.8 6.4 7.2 7.2 8.7 11.1 11.1 11.1 Refer to Page iv for description of Rapid Select. 81 1/4” Square Drive Sockets, Metric Magnetic, Standard Length, 6 Point Part Number Fixed Magnet A C mm B D M-5mm11 M-5.5mm11 M-6mm11 M-7mm11 M-8mm11 M-9mm11 M-10mm11 M-11mm11 M-12mm11 M-13mm11 M-14mm11 M-15mm11 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 5 5.5 6 7 8 9 10 11 12 13 14 15 22.2 22.2 22.2 22.2 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 8.7 9.5 9.5 11.9 12.7 14.3 15.9 15.9 17.5 19.1 20.6 22.2 12.7 12.7 12.7 12.7 12.7 14.3 15.9 15.9 17.5 19.1 20.6 22.2 3.9 3.9 3.9 4.8 4.8 4.8 6.4 7.2 7.2 8.7 11.1 11.1 Magnetic, Long Length, 6 Point Part No. Fixed Magnet A C mm B D * For an explanation of magnets, see Tool Tip on page 112. ** No ring groove. M-5mm21 M-6mm21 M-7mm21 M-8mm21 M-9mm21 M-10mm21 M-11mm21 M-12mm21 M-13mm21 M-14mm21 - Part No. Magnetic Bolt Clearance Hex Opening mm Overall Length (A) Diameter Nose End (B) MB-5mm21 MB-5.5mm21 MB-6mm21 MB-7mm21 MB-8mm21 MB-9mm21 MB-10mm21 **OSMB-10mm21 MB-11mm21 MB-12mm21 MB-13mm21 MB-14mm21 MB-15mm21 MB-16mm21 5 5.5 6 7 8 9 10 10 11 12 13 14 15 16 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 44.4 50.8 50.8 8.7 9.5 9.5 11.9 12.7 14.3 15.9 14.2 15.9 17.5 19.1 20.6 22.2 22.2 Diameter Drive End (C) 12.7 12.7 12.7 12.7 12.7 14.3 15.9 14.2 15.9 17.5 19.1 20.6 22.2 22.2 Opening Depth (D) 3.9 3.9 3.9 4.8 4.8 4.8 6.4 6.4 7.2 7.2 8.7 11.1 11.1 11.1 Surface Drive, Standard and Long Length Part Number Surface Drive A C mm B D 82 Refer to Page iv for description of Rapid Select. SF-8mm11 SF-10mm11 SF-10mm21 SF-11mm11 SF-11mm21 SF-12mm21 SF-13mm11 SF-13mm21 SF-14mm11 SF-14mm21 SF-15mm11 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 8 10 10 11 11 11 13 13 14 14 15 25.4 25.4 44.4 25.4 44.4 44.4 25.4 44.4 25.4 44.4 25.4 12.7 15.9 15.9 15.9 15.9 17.5 19.1 19.1 20.6 20.6 22.2 12.7 15.9 15.9 15.9 15.9 15.9 19.1 19.1 20.6 20.6 22.2 4.7 6.4 6.4 7.2 7.2 7.2 8.7 8.7 11.1 11.1 11.1 1/4” Square Drive Sockets For Metric Sheet Metal Screws 6 Point and 6 Point Magnetic A mm C B D Part Number 6 Point Part Number Magnetic 3.5mmE1 4mmE1 4.5mmE1 5mm11 5.5mmE1 6mmE1 7mmE1 8mmE1 9mmE1 10mmE1 11mmE1 12mmE1 13mmE1 M-3.5mmE1 M-4mmE1 M-4.5mmE1 M-5mmE1 M-5.5mmE1 M-6mmE1 M-7mmE1 MR-7mmE1* M-8mmE1 M-9mmE1 M-10mmE1 M-11mmE1 M-12mmE1 M-13mmE1 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3.5 4 4.5 5 5.5 6 7 7 8 9 10 11 12 13 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 25.4 25.4 25.4 25.4 25.4 25.4 6.4 6.4 7.9 8.7 9.5 9.5 11.1 11.1 12.7 14.3 15.9 17.5 17.5 19.1 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 12.7 14.3 15.9 17.5 17.5 19.1 2.4 2.4 2.4 3.9 3.9 3.9 4.8 4.8 4.8 4.8 6.4 7.2 7.2 8.7 *MR-7mmE1 has stronger magnet 1/4” Square Drive Universal Wrenches, Metric 6 Point Part Number 6 Point A E D C B SA-15-6m SA-15-7m SA-16-8m SA-16-10m Hex Opening mm Overall Length (A) Socket Length (B) Socket Diameter (C) Nose End Diameter (D) Opening Depth (E) 6 7 8 10 31 31 38 40 19.1 19.1 19.1 20.6 15.9 15.9 19.1 19.1 9.5 10.3 11.1 15.1 9.5 9.5 7.9 9.5 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 1/4” Square Drive Sockets For Spline Fasteners Standard and Long Length A C B Apex spline sockets conform to military specifications MS-37787 and MIL-W-8982C. Part Number Spline Size CMS-1407 CMS-1507 CMS-1408 CMS-1508 CMS-1409 CMS-1509 CMS-1410 CMS-1510 CMS-1412 CMS-1414 7 7 8 8 9 9 10 10 12 14 Nominal Size 7/32 7/32 1/4 1/4 9/32 9/32 5/16 5/16 3/8 7/16 Refer to Page iv for description of Rapid Select. Overall Length (A) In. mm 7/8 2 7/8 2 7/8 2 7/8 2 7/8 1 22 51 22 51 22 51 22 51 22 25 Diameter Nose End (B) In. mm 21/64 21/64 3/8 3/8 7/16 7/16 29/64 29/64 17/32 39/64 8 8 10 10 11 11 12 12 14 16 Diameter Drive End (C) In. mm 7/16 7/16 7/16 7/16 7/16 7/16 29/64 29/64 17/32 39/64 11 11 11 11 11 11 12 12 14 16 83 1/4” Square Drive Torx® Sockets For External Torx Screws A B C Part Number Driver Size Overall Length (A) In. mm TX-1104 TX-1105 TX-1106 TX-1108 TX-1110 TX-1112 E-4 E-5 E-6 E-8 E-10 E-12 1 1 1 1 1 1 25.4 25.4 25.4 25.4 25.4 25.4 Nose End Diameter (B) In. mm 1/4 1/4 5/16 3/8 9/16 5/8 6.4 6.4 7.9 9.5 14.3 15.9 Drive End Diameter (C) In. mm 1/2 1/2 1/2 1/2 9/16 5/8 12.7 12.7 12.7 12.7 14.3 15.9 For External Torx Screws, Thin Wall A B C Part Number Driver Size Overall Length (A) In. mm TX-1404 TX-1405 TX-1406 TX-1407 TX-1408 TX-1410 TX-1411 TX-1412 E-4 E-5 E-6 E-7 E-8 E-10 E-11 E-12 1 1 1 1 1 1 1 1 Part Number Driver Size Overall Length (A) In. mm TX-1E04 TX-1E05 TX-1E06 TX-1E08 TX-1E10 TX-1E12 E-4 E-5 E-6 E-8 E-10 E-12 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 Nose End Diameter (B) In. mm 1/4 1/4 5/16 5/16 3/8 1/2 1/2 9/16 6.4 6.4 7.9 7.9 9.5 12.7 12.7 14.3 Drive End Diameter (C) In. mm 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 12.7 12.7 12.7 12.7 12.7 12.7 12.7 14.3 For Torx Nuts A C B 7/8 7/8 7/8 7/8 1 1 22.2 22.2 22.2 22.2 25.4 25.4 Nose End Diameter (B) In. mm 5/16 3/8 7/16 1/2 9/16 5/8 Sockets for Torx® nuts have a larger lead-in chamfer than sockets for external Torx® screws. Most Torx® sockets have a DIN (pin and o-ring) groove. 84 Refer to Page iv for description of Rapid Select. 7.9 9.5 11.1 12.7 14.3 15.9 Drive End Diameter (C) In. mm 1/2 1/2 1/2 1/2 9/16 5/8 12.7 12.7 12.7 12.7 14.3 15.9 1/4” Square Drive Extensions 7/8” to 14” (22mm to 356mm) Length Part Number EX-252 EX-252-B EX-255-2 EX-255-B-2 EX-255-3 EX-255-4 EX-255-B-4 EX-255-6 EX-255-B-6 EX-255-8 EX-255-10 EX-255-12 EX-255-14 Male Square In. Type of Lock 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 Pin Ball Pin Ball Pin Pin Ball Pin Ball Pin Pin Pin Pin Overall Length In. mm 7/8 1 2 2 3 4 4 6 6 8 10 12 14 22 25 51 51 76 102 102 152 152 203 254 305 356 1/4” Square Drive Adapters 1/4” to 3/8” Male Square Part Number EX-372 EX-372-B Male Square In. Female Square In. Type of Lock In. Overall Length mm 3/8 3/8 1/4 1/4 Pin Ball 1 1 0 25 1/4” Square Drive Universal Adapters Male Square to Female Square Part Number MF-25 MF-25B Male Sq. In. Female Sq. In. Type of Lock 1/4 1/4 1/4 1/4 Pin Ball Overall Length In. mm 1 5/8 1 5/8 41 41 Largest Diameter In. mm 5/8 5/8 16 16 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. Refer to Page iv for description of Rapid Select. 85 3/8” Square Drive Sockets, SAE 6 Point and Double Hex, Short and Standard Length Part Number 6 Point A C inches B D 3108 3109 3010 3110 3111 3012 3112 3113 3014 3114 SW-604 3115 3016 3116 HC-3816 3117 3018 3118 SW-343 SW-605 3119 3020 3120 HC-3520* 3121 3022 3122 3024 3124 3026 3126 3028 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3108-D 3109-D 3110-D 3111-D 3012-D 3112-D 3113-D 3014-D 3114-D SW-604-D 3016-D 3116-D HC-3816-D 3117-D 3018-D 3118-D SW-343-D SW-605-D 3020-D 3120-D 3121-D 3022-D 3122-D 3024-D 3124-D 3026-D 3028-D 1/4 9/32 5/16 5/16 11/32 3/8 3/8 13/32 7/16 7/16 7/16 15/32 1/2 1/2 1/2 17/32 9/16 9/16 9/16 9/16 19/32 5/8 5/8 5/8 21/32 11/16 11/16 3/4 3/4 13/16 13/16 7/8 1 1/4 1 1/4 7/8 1 1/4 1 1/4 7/8 1 1/4 1 1/2 7/8 1 1/2 1 1/2 1 1/2 7/8 1 1/2 1 1/2 1 1/2 7/8 1 1/2 1 1/2 1 1/2 1 1/2 1 1 1/2 2 3/8 1 1/2 1 1 1/2 1 1 1/2 1 1 1/2 1 7/16 7/16 1/2 1/2 1/2 19/32 19/32 11/16 11/16 11/16 21/32 3/4 13/16 13/16 11/16 13/16 7/8 7/8 3/4 3/4 7/8 15/16 15/16 7/8 15/16 1 1 1 1/16 1 1/16 1 1/8 1 1/8 1 1/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 13/16 13/16 11/16 13/16 7/8 7/8 3/4 13/16 7/8 15/16 15/16 7/8 15/16 1 1 1 1/16 1 1/16 1 1/8 1 1/8 1 1/4 5/32 3/16 3/16 3/16 3/16 3/16 1/4 1/4 9/32 9/32 9/32 9/32 5/16 11/32 11/32 11/32 5/16 7/16 7/16 7/16 7/16 7/16 7/16 7/32 7/16 7/16 7/16 7/16 15/32 7/16 7/16 7/16 *HC-3520 is spark plug socket. 86 Refer to Page iv for description of Rapid Select. 3/8” Square Drive Sockets, SAE 6 Point and Double Hex, Thin Wall, Standard Length Part Number 6 Point A C inches B D *No ring groove. 3408 3409 3410 OS-3410* 3411 3412 3414 3416 3418 3420 3422 3424 3426 3428 3430 3432 3434 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3408-D 3410-D 3412-D 3414-D 3416-D 3418-D 3420-D 3422-D 3424-D 3426-D 3428-D 3430-D 3432-D 3434-D 1/4 9/32 5/16 5/16 11/32 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 7/16 7/16 1/2 7/16 1/2 19/32 5/8 3/4 25/32 7/8 15/16 1 1 1/8 1 3/16 1 5/16 1 3/8 1 1/2 3/4 3/4 3/4 19/32 3/4 3/4 3/4 3/4 13/16 7/8 15/16 1 1 1/8 1 1/4 1 5/16 1 3/8 1 1/2 5/32 3/16 3/16 3/16 3/16 1/4 9/32 11/32 7/16 7/16 7/16 15/32 17/32 9/16 5/8 5/8 11/16 6 Point and Double Hex, Long and Extra Long Length Part Number 6 Point A C inches B D *No ring groove. Refer to Page iv for description of Rapid Select. 3208 3308 3209 3210 3310 OS-3310-D* 3211 3311 3212 3312 3214 3314 3216 3316 3218 3318 3220 3320 3222 3322 3224 3324 3226 3326 3228 3328 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3208-D 3308-D 3209-D 3210-D 3310-D 3211-D 3212-D 3312-D 3214-D 3314-D 3216-D 3316-D 3218-D 3318-D 3220-D 3320-D 3222-D 3322-D 3224-D 3324-D 3226-D 3326-D 3228-D 3328-D 1/4 1/4 9/32 5/16 5/16 5/16 11/32 11/32 3/8 3/8 7/16 7/16 1/2 1/2 9/16 9/16 5/8 5/8 11/16 11/16 3/4 3/4 13/16 13/16 7/8 7/8 2 3 1/2 2 2 3 1/2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 7/16 7/16 7/16 1/2 1/2 15/32 1/2 1/2 19/32 19/32 11/16 11/16 13/16 13/16 7/8 7/8 15/16 15/16 1 1 1 1/16 1 1/16 1 1/4 1 1/4 1 1/4 1 1/4 3/4 3/4 3/4 3/4 3/4 5/8 3/4 3/4 3/4 3/4 3/4 3/4 13/16 13/16 7/8 7/8 15/16 15/16 1 1 1 1/16 1 1/16 1 1/4 1 1/4 1 1/4 1 1/4 5/32 5/32 3/16 3/16 3/16 3/16 3/16 3/16 1/4 1/4 9/32 9/32 11/32 11/32 7/16 7/16 7/16 7/16 7/16 7/16 15/32 15/32 17/32 17/32 9/16 9/16 87 3/8” Square Drive Sockets, SAE 6 Point and Double Hex, Thin Wall, Long Length Part Number 6 Point A C inches B D 3510 3511 3512 3513 3514 3516 3518 3522 3524 3530 3532 3534 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3512-D 3514-D 3516-D 3518-D 3522-D 3524-D 3530-D 3532-D - 5/16 11/32 3/8 3/8 7/16 1/2 9/16 11/16 3/4 15/16 1 1 1/16 2 2 2 2 2 2 2 2 2 2 2 2 1/2 1/2 19/32 5/8 5/8 3/4 25/32 15/16 1 1 5/16 1 3/8 1 1/2 3/4 3/4 3/4 3/4 3/4 3/4 13/16 15/16 1 1 5/16 1 3/8 1 1/2 3/16 3/16 1/4 1/4 9/32 11/32 7/16 7/16 15/32 5/8 5/8 11/16 Magnetic, Short and Standard Length A C inches B D 88 Part Number Fixed Magnet Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) M-3108 M-3109 M-3110 M-3111 M-3012 M-3112 M-3014 M-3114 MSW-604 M-3115 M-3016 M-3116 MHC-3816 M-3117 M-3018 M-3118 MSW-343 M-3119 M-3120 M-3122 1/4 9/32 5/16 11/32 3/8 3/8 7/16 7/16 7/16 15/32 1/2 1/2 1/2 17/32 9/16 9/16 9/16 19/32 5/8 11/16 1 1/4 1 1/4 1 1/4 1 1/4 7/8 1 1/4 7/8 1 1/2 1 1/2 1 1/2 7/8 1 1/2 1 1/2 1 1/2 7/8 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 7/16 7/16 1/2 1/2 19/32 19/32 11/16 11/16 21/32 3/4 13/16 13/16 11/16 13/16 7/8 7/8 3/4 7/8 15/16 1 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 13/16 13/16 11/16 13/16 7/8 7/8 3/4 7/8 15/16 1 5/32 3/16 3/16 3/16 3/16 1/4 9/32 9/32 9/32 9/32 5/16 11/32 11/32 11/32 5/16 7/16 7/16 7/16 7/16 7/16 Refer to Page iv for description of Rapid Select. 3/8” Square Drive Sockets, SAE Magnetic, Thin Wall, Standard Length A C inches B D Part Number Fixed Magnet Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) M-3408 M-3409 M-3410 OSM-3410* M-3411 M-3412 M-3414 OSM-3414* M-3416 M-3418 M-3420 M-3424 M-3426 M-3430 1/4 9/32 5/16 5/16 11/32 3/8 7/16 7/16 1/2 9/16 5/8 3/4 13/16 15/16 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 7/16 7/16 1/2 7/16 1/2 19/32 5/8 5/8 3/4 25/32 7/8 1 1 1/8 1 5/16 3/4 3/4 3/4 19/32 3/4 3/4 3/4 5/8 3/4 13/16 7/8 1 1 1/8 1 5/16 5/32 3/16 3/16 3/16 3/16 1/4 9/32 9/32 11/32 7/16 7/16 15/32 17/32 17/32 *No ring groove. Magnetic, Long Length and Extra Long Length A C inches B D Part No. Fixed Magnet Part No. Magnetic Bolt Clearance M-3212 M-3214 M-3216 M-3218 - MB-3210 MB-3212 MB-3214 MB-3314 MB-3216 MB-3218 MB-3318 MB-3220 Hex Opening In. Overall Length (A) Diameter Nose End (B) 5/16 3/8 7/16 7/16 1/2 9/16 9/16 5/8 2 2 2 3 1/2 2 2 3 1/2 2 1/2 19/32 11/16 11/16 13/16 7/8 7/8 15/16 Hex Opening In. Overall Length (A) Diameter Nose End (B) 3/8 7/16 1/2 2 2 2 19/32 5/8 3/4 Diameter Drive End (C) 3/4 3/4 3/4 3/4 13/16 7/8 7/8 15/16 Opening Depth (D) 3/16 1/4 9/32 9/32 11/32 7/16 7/16 7/16 Magnetic, Thin Wall, Long Length A C inches Part No. Fixed Magnet Part No. Magnetic Bolt Clearance M-3514 - MB-3512 MB-3514 MB-3516 Diameter Drive End (C) 3/4 3/4 3/4 Opening Depth (D) 1/4 9/32 11/32 B D Refer to Page iv for description of Rapid Select. 89 3/8” Square Drive Sockets, SAE Surface Drive and Fast Lead, Short and Standard Length Part No. Surface Drive A C inches B D SF-3108 SF-3010 SF-3110 SF-3012 SF-3112 SF-3014 SF-3114 SF-3016 SF-3116 SF-HC3816 SF-3018 SF-3118 SF-3120 SF-3122 SF-3124 SF-3028 Part Number Fast Lead FL-3108 FL-3110 FL-3012 FL-3112 FL-3014 FL-3114 FL-3016 FL-3116 FL-3018 FL-3118 FL-3119 FL-3020 FL-3120 FL-3022 FL-3122 FL-3024 FL-3124 - Hex Opening In. Overall Length (A) Diameter Nose End (B) 1/4 5/16 5/16 3/8 3/8 7/16 7/16 1/2 1/2 1/2 9/16 9/16 19/32 5/8 5/8 11/16 11/16 3/4 3/4 7/8 1 1/4 7/8 1 1/4 7/8 1 1/4 7/8 1 1/2 7/8 1 1/2 1 1/2 7/8 1 1/2 1 1/2 1 1 1/2 1 1 1/2 1 1 1/2 1 7/16 1/2 1/2 19/32 19/32 11/16 11/16 13/16 13/16 11/16 7/8 7/8 7/8 15/16 15/16 15/16 1 1 1/16 1 1/16 1 1/4 Diameter Drive End (C) 3/4 3/4 3/4 3/4 3/4 3/4 3/4 13/16 13/16 11/16 7/8 7/8 7/8 15/16 15/16 15/16 1 1 1/16 1 1/16 1 1/4 Opening Depth (D) 5/32 3/16 3/16 3/16 1/4 9/32 9/32 5/16 11/32 11/32 5/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 15/32 9/16 Surface Drive and Fast Lead, Thin Wall, Standard Length Part No. Surface Drive SF-3412 SF-3414 SF-3416 SF-3418 SF-3420 SF-3422 SF-3430 SF-3432 Part Number Fast Lead FL-3410 FL-3412 FL-3414 - Hex Opening In. Overall Length (A) Diameter Nose End (B) 5/16 3/8 7/16 1/2 9/16 5/8 11/16 15/16 1 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1/2 19/32 5/8 3/4 25/32 7/8 15/16 1 5/16 1 3/8 A C inches B D 90 Refer to Page iv for description of Rapid Select. Diameter Drive End (C) 3/4 3/4 3/4 3/4 13/16 7/8 15/16 1 5/16 1 3/8 Opening Depth (D) 3/16 1/4 9/32 11/32 7/16 7/16 7/16 7/16 5/8 3/8” Square Drive Sockets, SAE Surface Drive and Fast Lead, Long and Extra Long Length Part No. Surface Drive A C inches B D SF-3212 SF-3312 SF-3214 SF-3314 SF-3216 SF-3316 SF-3218 SF-3318 SF-3220 SF-3320 SF-3222 SF-3322 SF-3224 SF-3324 SF-3226 - Part Number Fast Lead FL-3210 FL-3212 FL-3312 FL-3214 FL-3314 FL-3216 FL-3316 FL-3218 FL-3318 FL-3220 FL-3320 FL-3324 FL-3326 Hex Opening In. Overall Length (A) Diameter Nose End (B) 5/16 3/8 3/8 7/16 7/16 1/2 1/2 9/16 9/16 5/8 5/8 11/16 11/16 3/4 3/4 13/16 13/16 2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 2 3 1/2 1/2 19/32 19/32 11/16 11/16 13/16 13/16 7/8 7/8 15/16 15/16 1 1 1 1/16 1 1/16 1 1/4 1 1/4 Diameter Drive End (C) 3/4 3/4 3/4 3/4 3/4 13/16 13/16 7/8 7/8 15/16 15/16 1 1 1 1/16 1 1/16 1 1/4 1 1/4 Opening Depth (D) 3/16 1/4 1/4 9/32 9/32 11/32 11/32 7/16 7/16 7/16 7/16 7/16 7/16 15/32 15/32 17/32 17/32 Surface Drive, Thin Wall, Long Length Part No. Surface Drive A C inches B D SF-3512 OSSF-3512* SF-3514 OSSF-3514* SF-3516 SF-3518 SF-3524 Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3/8 3/8 7/16 7/16 1/2 9/16 3/4 2 2 2 2 2 2 2 19/32 19/32 5/8 5/8 3/4 25/32 1 3/4 19/32 3/4 5/8 3/4 13/16 1 1/4 1/4 9/32 9/32 11/32 7/16 15/32 *No ring groove. Refer to Page iv for description of Rapid Select. 91 3/8” Square Drive Sockets For SAE Sheet Metal Screws 6 Point and 6 Point Magnetic, For Predrilled Holes* A C inches B D Part Number 6 Point Part Number Magnetic Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3E06 3E07 3E08 3E10 3E11 3E12 3E14 3E16 3E18 M3E08 M3E09 M3E10 M3E11 M3E12 M3E14 M3E16 M3E18 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 5/16 3/8 7/16 7/16 1/2 1/2 19/32 11/16 13/16 7/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 13/16 7/8 3/32 5/32 5/32 3/16 3/16 3/16 1/4 9/32 11/32 7/16 6 Point and 6 Point Magnetic, For Self-Tapping Screws* A C inches B D Part Number 6 Point Part Number Magnetic Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3P06 3P07 3P08 3P09 3P10 3P11 3P12 3P14 3P16 3P18 M3P06 M3P07 M3P08 M3P09 M3P10 M3P11 M3P12 M3P14 M3P16 M3P18 3/16 7/32 1/4 9/32 5/16 11/32 3/8 7/16 1/2 9/16 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 1/2 5/16 3/8 7/16 7/16 1/2 9/16 5/8 11/16 13/16 7/8 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 13/16 7/8 3/32 5/32 5/32 3/16 3/16 3/16 1/4 9/32 11/32 7/16 *Sockets for predrilled holes are intermediate hardness; sockets for self-tapping screws are maximum hardness. 3/8” Square Drive Sockets For SAE Square Nuts Single Square and Double Square A C inches B D Part Number Square Part No. Double Square Square Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3607 3608 3609 3610 3612 3614 3616 3618 3620 3622 3624 3608-D 3609-D 3610-D 3612-D 3614-D 3616-D 3618-D - 7/32 1/4 9/32 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 7/16 1/2 9/16 5/8 3/4 7/8 1 1 1 1/8 1 1/4 1 3/8 3/4 3/4 3/4 3/4 3/4 7/8 1 1 1 1/8 1 1/4 1 3/8 3/16 3/16 3/16 1/4 1/4 9/32 11/32 7/16 7/16 7/16 15/32 Refer to Page iv for description of Rapid Select. 92 3/8” Square Drive Socket Sets, SAE 6 Point APS38 APS38L 8 piece, standard length: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 8 piece, long length: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 3/8” Square Drive Universal Wrenches, SAE 6 Point and 12 Point A E D C B Part Number 6 Point Part Number 12 Point Hex Opening In. SA-120 SA-122 SA-200 SA-123 SA-201 SA-124 SA-202 SA-301 SA-125 SA-203 SA-302 SA-205 SA-304 SA-305 SA-306 SA-120-D SA-122-D SA-123-D SA-124-D SA-202-D SA-125-D SA-203-D SA-205-D SA-306-D 5/16 3/8 3/8 7/16 7/16 1/2 1/2 1/2 9/16 9/16 9/16 5/8 5/8 11/16 3/4 Overall Length (A) In. Socket Length (B) In. 1 53/64 1 57/64 1 15/16 2 1/64 2 2 5/64 2 1/16 2 1/16 2 1/8 2 1/16 2 1/8 2 1/8 2 3/16 2 5/16 2 5/16 3/4 13/16 7/8 15/16 15/16 1 1 1 1 1 1/16 1 1/8 1 1/8 1 3/16 1 1/4 1 1/4 Socket Diameter (C) In. Nose End Diameter (D) In. 3/4 3/4 7/8 3/4 7/8 3/4 7/8 1 13/16 7/8 1 7/8 1 1 1 1/8 7/16 9/16 9/16 19/32 5/8 3/4 11/16 11/16 13/16 3/4 3/4 7/8 27/32 1 1 1/8 Clearance Depth (E) In. 5/16 3/8 11/32 1/2 13/32 9/16 15/32 7/16 9/16 17/32 9/16 19/32 5/8 11/16 11/16 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 3/8” Square Drive Universal Wrench Set, SAE 6 Point APU37 7 piece, standard length: 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 Refer to Page iv for description of Rapid Select. 93 3/8” Square Drive Universal Wrenches, SAE – Extension 6 Point and Double Hex, Standard and Tension Type Part Number Standard Tension Type Standard Type A E DC B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. Part Number Tension KA-43-3 KA-43-4 KA-43-6 KD-43-6 KD-43-9 KA-44-3 KA-44-4 KA-44-6 KD-44-6 KD-44-9 KD-44-12 KA-103-3 KA-103-4 KA-103-6 KD-103-6 KA-45-3 KA-45-4 KA-45-6 KD-45-6 KA-45-9 KD-45-9 KA-45-12 KD-45-12 KA-104-3 KA-104-4 KA-104-6 KD-104-6 KA-104-9 KA-104-12 KD-104-12 KA-105-3 KD-105-3 KA-105-4 KD-105-4 KA-105-6 KD-105-6 KA-105-9 KD-105-9 KA-105-12 KD-105-12 KA-205-3 KA-205-6 KD-205-6 KD-205-12 Hex Opening In. 3/8 3/8 3/8 3/8 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 9/16 5/8 5/8 5/8 Overall Length (A) In. 3 4 6 9 3 4 6 9 12 3 4 6 3 4 6 9 12 3 4 6 9 12 3 4 6 9 12 3 6 12 Socket Length (B) In. Socket Diameter (C) In. 13/16 13/16 13/16 13/16 7/8 7/8 7/8 7/8 7/8 15/16 15/16 15/16 7/8 7/8 7/8 7/8 7/8 1 1 1 1 1 1 1 1 1 1 1 1/8 1 1/8 1 1/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 3/4 11/16 11/16 11/16 11/16 11/16 3/4 3/4 3/4 3/4 3/4 13/16 13/16 13/16 13/16 13/16 7/8 7/8 7/8 Nose End Diameter (D) In. 17/32 17/32 17/32 17/32 5/8 5/8 5/8 5/8 5/8 19/32 19/32 19/32 11/16 11/16 11/16 11/16 11/16 3/4 3/4 3/4 3/4 3/4 13/16 13/16 13/16 13/16 13/16 7/8 7/8 7/8 Clearance Depth (E) In. 7/16 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 19/32 19/32 19/32 3/8” Sq. Dr. Socket Head Bits, SAE Complete, Adapter Only, Insert Only A See page 35 for more 3/8” drive complete socket head bits. 94 Complete Part Number Adapter Only SZ-10 SZ-11 SZ-12 SZ-13 SZ-14 SZ-15 SZ-16 SC-314 SC-314 SC-314 SC-314 SC-314 SC-314 SC-314 Overall Length Insert Only Hex Size In. mm SZ-10-A SZ-11-A SZ-12-A SZ-13-A SZ-14-A SZ-15-A SZ-16-A 1/8 5/32 3/16 7/32 1/4 5/16 3/8 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 57 57 57 57 57 57 57 Refer to Page iv for description of Rapid Select. Length of Insert (A) In. mm 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 35 35 35 35 35 35 35 3/8” Square Drive Sockets, Metric 6 Point and 12 Point, Short and Standard Length Part Number 6 Point A C mm B D 6mm13 7mm03 7mm13 8mm03 8mm13 OS-8mm13* 9mm03 9mm13 10mm03 OS-10mm03* 10mm13 11mm03 11mm13 12mm03 12mm13 13mm03 13mm13 14mm03 14mm13 15mm03 15mm13 16mm03 16mm13 17mm03 17mm13 18mm03 18mm13 19mm03 19mm13 20mm03 20mm13 21mm03 21mm13 22mm03 22mm13 Part Number 12 Point Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 8mm13-D 9mm03-D 9mm13-D 10mm03-D 10mm13-D 11mm03-D 11mm13-D 12mm03-D 12mm13-D 13mm03-D 13mm13-D 14mm03-D 14mm13-D 15mm03-D 15mm13-D 16mm03-D 16mm13-D 17mm03-D 17mm13-D 18mm03-D 18mm13-D 19mm03-D 19mm13-D - 6 7 7 8 8 8 9 9 10 10 10 11 11 12 12 13 13 14 14 15 15 16 16 17 17 18 18 19 19 20 20 21 21 22 22 31.7 22.2 31.7 22.2 31.7 31.7 22.2 31.7 22.2 22.1 31.7 22.2 31.7 22.2 38.1 22.2 38.1 22.2 38.1 23.8 38.1 25.4 38.1 25.4 38.1 25.4 38.1 25.4 38.1 25.4 38.1 25.4 38.1 25.4 38.1 11.1 11.1 11.1 12.7 12.7 11.7 15.1 15.1 16.8 15.7 16.8 17.5 17.5 19.1 19.1 20.6 20.6 22.2 22.2 22.2 22.2 23.8 23.8 25.4 25.4 25.4 25.4 28.6 28.6 28.6 28.6 31.7 31.7 31.7 31.7 19.1 19.1 19.1 19.1 19.1 15.7 19.1 19.1 19.1 15.7 19.1 19.1 19.1 19.1 19.1 20.6 20.6 22.2 22.2 22.2 22.2 23.8 23.8 25.4 25.4 25.4 25.4 28.6 28.6 28.6 28.6 31.7 31.7 31.7 31.7 3.9 3.0 4.8 4.8 4.8 4.8 4.8 4.8 6.4 6.4 6.4 7.2 7.2 7.2 7.2 7.9 8.7 7.9 11.1 9.5 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.9 11.1 11.9 11.1 13.5 11.1 14.3 *No ring groove. Refer to Page iv for description of Rapid Select. 95 3/8” Square Drive Sockets, Metric 6 Point and Double Hex, Thin Wall, Standard Length Part Number 6 Point A C mm B D 6mm43 7mm43 8mm43 9mm43 10mm43 11mm43 12mm43 13mm43 14mm43 15mm43 16mm43 17mm43 18mm43 19mm43 Part Number Double Hex Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 7mm43-D 8mm43-D 9mm43-D 10mm43-D 11mm43-D 12mm43-D 13mm43-D 14mm43-D 15mm43-D 16mm43-D 17mm43-D 18mm43-D 19mm43-D 6 7 8 9 10 11 12 13 14 15 16 17 18 19 31.7 31.7 31.7 31.7 31.7 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 9.5 11.1 12.7 12.7 15.1 15.9 17.5 19.1 19.8 20.6 22.2 23.8 23.8 25.4 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 20.6 20.6 22.2 23.8 23.8 25.4 3.9 4.8 4.8 4.8 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 6 Point and Double Hex, Long and Extra Long Length Part Number 6 Point A C mm B D Part Number Double Hex 6mm23 7mm23 8mm23 8mm23-D 9mm23 9mm23-D 10mm23 10mm23-D OS-10mm23* OS-10mm23-D* 10mm33 11mm23 11mm23-D 12mm23 12mm23-D 13mm23 13mm23-D 13mm33 14mm23 14mm23-D 15mm23 15mm23-D 15mm33 15mm33-D 16mm23 16mm23-D 17mm23 17mm23-D 18mm23 18mm23-D 19mm23 19mm23-D 20mm23 20mm23-D 21mm23 22mm23 - Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 6 7 8 9 10 10 10 11 12 13 13 14 15 15 16 17 18 19 20 21 22 50.8 50.8 50.8 50.8 50.8 50.8 88.9 50.8 50.8 50.8 88.9 50.8 50.8 88.9 50.8 50.8 50.8 50.8 50.8 50.8 50.8 11.1 11.1 12.7 15.1 16.8 14.2 16.8 17.5 19.1 20.6 20.6 22.2 22.2 22.2 23.8 25.4 25.4 28.6 28.6 31.7 31.7 19.1 19.1 19.1 19.1 19.1 15.9 19.1 19.1 19.1 20.6 20.6 22.2 22.2 22.2 23.8 25.4 25.4 28.6 28.6 31.7 31.7 3.9 4.8 4.8 4.8 6.4 6.4 6.4 7.2 7.2 8.7 8.7 11.1 11.1 11.1 11.1 11.1 11.1 11.9 11.9 13.5 14.3 *No ring groove. 96 Refer to Page iv for description of Rapid Select. 3/8” Square Drive Sockets, Metric Magnetic, Short and Standard Length A C mm B D Part Number Fixed Magnet Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) M-6mm13 M-7mm13 M-8mm13 M-9mm13 M-10mm03 M-10mm13 M-11mm03 M-11mm13 M-12mm03 M-12mm13 M-13mm03 M-13mm13 M-14mm13 M-15mm03 M-15mm13 M-16mm13 M-17mm13 M-18mm03 M-18mm13 6 7 8 9 10 10 11 11 12 12 13 13 14 15 15 16 17 18 18 31.8 31.8 31.8 31.8 22.2 31.8 22.2 38.1 22.2 38.1 22.2 38.1 38.1 23.8 38.1 38.1 38.1 25.4 38.1 11.1 11.1 12.7 15.1 16.8 16.8 17.5 17.5 19.1 19.1 20.6 20.6 22.2 22.2 22.2 23.8 25.4 25.4 25.4 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 20.6 20.6 22.2 22.2 22.2 23.8 25.4 25.4 25.4 3.9 4.8 4.8 4.8 6.4 6.4 7.2 7.2 7.2 7.2 8.7 8.7 11.1 9.5 11.1 11.1 11.1 11.1 11.1 Magnetic, Thin Wall, Standard Length A C mm B D Part Number Fixed Magnet Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) M-6mm43 M-8mm43 M-9mm43 M-10mm43 M-11mm43 M-12mm43 M-13mm43 M-14mm43 M-15mm43 6 8 9 10 11 12 13 14 15 31.7 31.7 31.7 31.7 38.1 38.1 38.1 38.1 38.1 9.5 12.7 12.7 15.1 15.9 17.5 19.1 19.8 20.5 19.1 19.1 19.1 19.1 19.1 19.1 19.1 20.6 20.6 3.9 4.8 4.8 6.4 7.2 7.2 8.7 11.1 11.1 Refer to Page iv for description of Rapid Select. 97 3/8” Square Drive Sockets, Metric Magnetic, Long and Extra Long Length Part Number Magnetic Bolt Clearance A C mm B D Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 6 7 8 8 9 10 10 10 11 12 13 13 14 15 15 16 17 18 50.8 50.8 50.8 50.8 50.8 50.8 50.8 88.9 50.8 50.8 50.8 88.9 50.8 50.8 88.9 50.8 50.8 50.8 11.1 11.1 12.7 11.7 15.1 16.8 14.2 16.8 17.5 19.1 20.6 20.6 22.2 22.2 22.2 23.8 25.4 25.4 19.1 19.1 19.1 15.9 19.1 19.1 15.9 19.1 19.1 19.1 20.6 20.6 22.2 22.2 22.2 23.8 25.4 25.4 3.9 4.8 4.8 4.8 4.8 6.4 6.4 6.4 7.2 7.2 8.7 8.7 11.1 11.1 11.1 11.1 11.1 11.1 MB-6mm23 MB-7mm23 MB-8mm23 OSMB-8mm23* MB-9mm23 MB-10mm23 OSMB-10mm23* MB-10mm33 MB-11mm23 MB-12mm23 MB-13mm23 MB-13mm33 MB-14mm23 MB-15mm23 MB-15mm33 MB-16mm23 MB-17mm23 MB-18mm23 *No ring groove. Surface Drive, Short and Standard Length Part Number Surface Drive A C mm B D 98 SF-8mm13 SF-9mm13 SF-10mm03 SF-10mm13 SF-11mm03 SF-11mm13 SF-12mm03 SF-12mm13 SF-13mm03 SF-13mm13 SF-14mm03 SF-14mm13 SF-15mm03 SF-15mm13 SF-16mm13 SF-17mm03 SF-17mm13 SF-18mm03 SF-18mm13 SF-19mm03 SF-19mm13 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 8 9 10 10 11 11 12 12 13 13 14 14 15 15 16 17 17 18 18 18 18 31.7 31.7 22.2 31.7 22.2 38.1 22.2 38.1 22.2 38.1 22.2 38.1 23.8 38.1 38.1 25.4 38.1 25.4 38.1 25.4 38.1 12.7 15.1 16.8 16.8 17.5 17.5 19.1 19.1 20.6 20.6 22.2 22.2 22.2 22.2 23.8 25.4 25.4 25.4 25.4 28.6 28.6 19.1 19.1 19.1 19.1 19.1 19.1 19.1 19.1 20.6 20.6 22.2 22.2 22.2 22.2 23.8 25.4 25.4 25.4 25.4 28.6 28.6 4.8 4.8 6.4 6.4 7.2 7.2 7.2 7.2 8.7 8.7 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.1 11.9 11.9 Refer to Page iv for description of Rapid Select. 3/8” Square Drive Sockets, Metric Surface Drive, Thin Wall, Standard Length Part Number Surface Drive A C mm B D Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 10 10 11 12 13 15 16 17 18 19 31.7 31.7 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 15.1 15.1 15.9 17.5 19.1 20.6 22.2 23.8 23.8 25.4 19.1 15.1 19.1 19.1 19.1 20.6 22.2 23.8 23.8 25.4 6.4 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.9 SF-10mm43 OSSF-10mm43* SF-11mm43 SF-12mm43 SF-13mm43 SF-15mm43 SF-16mm43 SF-17mm43 SF-18mm43 SF-19mm43 Surface Drive, Long and Extra Long Length Part Number Surface Drive A C mm B D SF-8mm23 OSSF-8mm23* SF-10mm23 OSSF-10mm23* SF-10mm33 SF-11mm23 SF-12mm23 SF-13mm23 SF-13mm33 SF-15mm23 SF-15mm33 SF-17mm23 SF-18mm23 SF-19mm23 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 8 8 10 10 10 11 12 13 13 15 15 17 18 19 50.8 50.8 50.8 50.8 88.9 50.8 50.8 50.8 88.9 50.8 88.9 50.8 50.8 50.8 12.7 11.9 16.8 14.2 16.8 17.5 19.1 20.6 20.6 22.2 22.2 25.4 25.4 28.6 19.1 15.9 19.1 15.9 19.1 19.1 19.1 20.6 20.6 22.2 22.2 25.4 25.4 28.6 4.8 4.8 6.4 6.4 6.4 7.2 7.2 8.7 8.7 11.1 11.1 11.1 11.1 11.9 *No ring groove. 3/8” Sq. Dr. Sockets For Metric Sheet Metal Screws 6 Point and 6 Point Magnetic, for Predrilled Holes Part Number 6 Point A C mm B D 6mmE3 7mmE3 8mmE3 9mmE3 10mmE3 11mmE3 12mmE3 13mmE3 Part Number Magnetic M-6mmE3 M-7mmE3 M-8mmE3 M-9mmE3 M-10mmE3 M-11mmE3 M-12mmE3 M-13mmE3 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 6 7 8 9 10 11 12 13 31.7 31.7 31.7 31.7 31.7 31.7 31.7 38.1 11.1 11.9 12.7 15.1 16.8 17.5 19.1 20.6 19.1 19.1 19.1 19.1 19.1 19.1 19.1 20.6 3.9 4.8 4.8 4.8 6.4 7.2 7.2 8.7 Refer to Page iv for description of Rapid Select. 99 3/8” Square Drive Socket Sets, Metric 6 Point APS38M 8 piece, standard length: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm APS312M 12 piece, standard length: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm APS38LM 8 piece, long length: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm APS312LM 12 piece, long length: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm Universal Wrenches 3/8” Square Drive, Metric 6 Point Part Number 6 Point A E D C B SA-36-10m SA-37-11m SA-37-12m SA-37-13m SA-37-14m SA-38-15m SA-38-17m SA-38-18m Hex Opening mm Overall Length (A) mm 10 11 12 13 14 15 17 18 48 51 51 52 54 56 59 59 Socket Length (B) mm 20.6 23.8 23.8 25.4 27.0 28.6 31.8 31.8 Socket Diameter (C) mm 19.1 22.2 22.2 22.2 22.2 25.4 25.4 25.4 Nose End Diameter (D) mm 15.1 15.9 17.5 17.5 19.1 19.8 25.4 25.4 Clearance Depth (E) mm 9.5 10.3 10.3 11.9 13.5 14.3 17.5 17.5 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 3/8” Square Drive Universal Wrench Set, Metric 6 Point APU37M 100 7 piece, standard length: 10mm, 12mm, 13mm, 14mm, 15mm, 17mm, 18mm Refer to Page iv for description of Rapid Select. 3/8” Square Drive Universal Wrenches, Metric – Extension 6 Point, Standard and Tension Type Part Number Standard Tension Type Standard Type A E DC B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. Part Number Tension KA-6-10m-3 KA-6-10m-4 KA-6-10m-6 KA-6-10m-9 KA-6-10m-12 KA-7-11m-3 KA-7-11m-6 KA-7-11m-12 KA-7-12m-3 KA-7-12m-4 KA-7-12m-6 KA-7-12m-9 KA-7-12m-12 KA-7-13m-3 KA-7-13m-4 KA-7-13m-6 KA-7-13m-9 KA-7-13m-12 KA-7-14m-3 KA-7-14m-4 KA-7-14m-6 KA-7-14m-9 KA-7-14m-12 KA-8-15m-3 KA-8-15m-4 KA-8-15m-6 KA-8-15m-9 KA-8-15m-12 Hex Opening mm Shank Length (A) mm Socket Length (B) mm Socket Diameter (C) mm 10 10 10 10 10 11 11 11 11 12 12 12 12 12 13 13 13 13 13 14 14 14 14 14 15 15 15 15 15 76 102 152 229 305 76 152 229 305 76 102 152 229 305 76 102 152 229 305 76 102 152 229 305 76 102 152 229 305 20.6 20.6 20.6 20.6 20.6 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8 25.4 25.4 25.4 25.4 25.4 27.0 27.0 27.0 27.0 27.0 28.6 28.6 28.6 28.6 28.6 19.1 19.1 19.1 19.1 19.1 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 25.4 25.4 25.4 25.4 25.4 KD-6-10m-6 KD-6-10m-9 KD-6-10m-12 KD-7-11m-6 KD-7-11m-9 KD-7-11m-12 KD-7-12m-6 KD-7-12m-9 KD-7-12m-12 KD-7-13m-6 KD-7-13m-9 KD-7-13m-12 KD-7-14m-6 KD-7-14m-9 KD-8-15m-6 KD-8-15m-9 KD-8-15m-12 Nose End Diameter (D) mm 15.1 15.1 15.1 15.1 15.1 15.9 15.9 15.9 15.9 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 19.1 19.1 19.1 19.1 19.1 19.8 19.8 19.8 19.8 19.8 Clearance Depth (E) mm 9.5 9.5 9.5 9.5 9.5 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 10.3 11.9 11.9 11.9 11.9 11.9 13.5 13.5 13.5 13.5 13.5 14.3 14.3 14.3 14.3 14.3 3/8” Square Drive Socket Head Bits, Metric Complete, Adapter Only, Insert Only Complete A Part Number Adapter Only SZ-3-7-4mm SZ-3-7-5mm SZ-3-7-6mm SZ-3-7-8mm SZ-3-7-10mm SC-314 SC-314 SC-314 SC-314 SC-314 Insert Only SZ-7-4mm SZ-7-5mm SZ-7-6mm SZ-7-8mm SZ-7-10mm Refer to Page iv for description of Rapid Select. Overall Length Hex Size In. mm 4mm 5mm 6mm 8mm 10mm 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 57 57 57 57 57 Length of Insert (A) In. mm 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 35 35 35 35 35 101 3/8” Square Drive Sockets For Spline Fasteners Standard and Long Length Part Number A C B CMS-3412 CMS-3512 CMS-3414 CMS-3514 CMS-3416 CMS-3418 CMS-3518 CMS-3420 CMS-3520 Spline Size Nominal Size 12 12 14 14 16 18 18 20 20 3/8 3/8 7/16 7/16 1/2 9/16 9/16 5/8 5/8 Overall Length (A) In. mm 1 2 1/8 1 1/16 2 1/8 1 1/16 1 1/16 2 3/8 1 3/16 2 3/8 25 54 27 54 27 27 60 30 60 Diameter Nose End (B) In. mm 17/32 17/32 5/8 5/8 23/32 13/16 13/16 7/8 7/8 14 14 16 16 18 21 21 22 22 Diameter Drive End (C) In. mm 21/32 21/32 11/16 11/16 23/32 13/16 13/16 7/8 7/8 17 17 18 18 18 21 21 22 22 Apex spline sockets conform to military specifications MS-37787 and MIL-W-8982C. 3/8” Square Drive Torx® Sockets For External Torx Screws A C B Part Number Driver Size TX-3106 TX-3107 TX-3108 TX-3110 TX-3112 TX-3114 TX-3116 E-6 E-7 E-8 E-10 E-12 E-14 E-16 Overall Length (A) In. mm 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 32 32 32 Nose End Diameter (B) In. mm 3/8 3/8 7/16 1/2 5/8 11/16 13/16 10 10 11 13 16 18 21 Drive End Diameter (C) In. mm 3/4 3/4 3/4 3/4 3/4 3/4 13/16 19 19 19 19 19 19 21 For External Torx Screws, Thin Wall A C B Part Number Driver Size TX-3406 TX-3407 TX-3408 TX-3508 TX-3410 TX-3412 TX-3414 TX-3416 E-6 E-7 E-8 E-8 E-10 E-12 E-14 E-16 Overall Length (A) In. mm 1 1/4 1 1/4 1 1/4 2 1 1/4 1 1/4 1 1/4 1 1/4 Some Torx® sockets have a DIN (pin and o-ring) groove. 102 Refer to Page iv for description of Rapid Select. 32 32 32 51 32 32 32 32 Nose End Diameter (B) In. mm 5/16 11/32 3/8 3/8 1/2 9/16 5/8 3/4 8 9 10 10 13 14 16 19 Drive End Diameter (C) In. mm 5/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 16 16 16 16 16 16 19 19 3/8” Square Drive Torx® Sockets For Torx Nuts A C B Part Number Driver Size TX-3E08 TX-3E10 TX-3E12 TX-3E14 TX-3E16 E-8 E-10 E-12 E-14 E-16 Overall Length (A) In. mm 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 32 Nose End Diameter (B) In. mm 5/8 5/8 11/16 3/4 13/16 Drive End Diameter (C) In. mm 16 16 17 19 21 5/8 5/8 11/16 3/4 13/16 16 16 17 19 21 Sockets for Torx® nuts have a larger lead-in chamfer than sockets for external Torx® screws. Some Torx® sockets have a DIN (pin and o-ring) groove. 3/8” Square Drive Extensions 1 1/4” to 18” (32mm to 457mm) Length Part Number EX-374 EX-374-B EX-376-2 EX-376-B-2 EX-376-3 EX-376-B-3 EX-376-4 EX-376-B-4 EX-376-5 EX-376-B-5 EX-376-6 EX-376-B-6 EX-376-8 EX-376-B-8 EX-376-9 EX-376-B-9 EX-376-10 EX-376-B-10 EX-376-12 EX-376-B-12 EX-376-15 EX-376-B-15 EX-376-18 Male Square In. Type of Lock In. 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin 1 3/8 1 3/8 2 2 3 3 4 4 5 5 6 6 8 8 9 9 10 10 12 12 15 15 18 Refer to Page iv for description of Rapid Select. Overall Length mm 34 34 51 51 76 76 102 102 127 127 152 152 203 203 229 229 254 254 305 305 381 381 457 103 3/8” Square Drive Adapters 1/4” to 3/4” Male Square Part Number Male Square In. Female Square In. Type of Lock In. mm 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 3/4 3/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Pin Ball Pin Ball Pin Ball Pin 7/32 Drill Hole Ball 1 1/4 1 1/4 2 2 3 3 4 4 5 5 6 6 1 1/2 1 1/2 2 3 3 4 4 6 6 1 1/2 1 1/2 1 1/2 32 32 51 51 76 76 102 102 127 127 152 152 38 38 51 76 76 102 102 152 152 38 38 38 EX-254 EX-254-B EX-257-2 EX-257-B-2 EX-257-3 EX-257-B-3 EX-257-4 EX-257-B-4 EX-257-5 EX-257-B-5 EX-257-6 EX-257-B-6 EX-503 EX-503-B EX-507-2 EX-507-3 EX-507-B-3 EX-507-4 EX-507-B-4 EX-507-6 EX-507-B-6 EX-622 EX-750 EX-750-B Overall Length 3/8” Square Drive Universal Adapters Male Square to Female Square Part Number Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. MF-27 MF-27B MF-37 MF-37B MF-38 MF-38B Male Square In. Female Square In. Type of Lock 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Pin Ball Pin Ball Pin Ball Overall Length In. mm 1 5/16 1 5/16 2 1/8 2 1/8 2 1/2 2 1/2 Largest Diameter In. mm 49 49 54 54 64 64 3/4 3/4 3/4 3/4 7/8 7/8 19 19 19 19 22 22 3/8” Square Drive Universal Adapters – Extension Male Square to Female Square Standard Part Number Tension Male Square In. Female Square In. Type of Lock 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 Pin Pin Pin Ball Pin Largest Diameter In. mm (Standard Type Shown) Standard lengths are 3”, 6”, 9” and 12” (76, 152, 229 and 305mm) KAM-25-3 KAM-37-3 KAM-37-B-3 KAM-38-6 KDM-25-3 KDM-37-3 KDM-37-6 KDM-37-B-3 KDM-38-6 104 Refer to Page iv for description of Rapid Select. 5/8 3/4 3/4 3/4 7/8 16 19 19 19 22 1/2” Square Drive Sockets, SAE 6 Point and Double Hex, Standard Length A C inches B D Part Number 6 Point Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 5108 5109 5110 5111 5112 5113 5114 5115 5116 SH-335 5117 5118 SH-336 5119 5120 SH-338 5121 5122 SH-339 SW-282 5124 5125 5126 5128 5129 5130 5131 5132 5134 5136 5138 5140 5142 5144 5146 5148 5150 5152 5154 5156 5108-D 5110-D 5112-D 5113-D 5114-D 5116-D SH-335-D 5118-D SH-336-D 5119-D 5120-D SH-338-D 5122-D SH-339-D SW-282-D 5124-D 5125-D 5126-D 5128-D 5129-D 5130-D 5131-D 5132-D 5134-D 5136-D 5138-D 5140-D 5142-D 5144-D 5146-D 5148-D 5150-D 5152-D 5154-D 5156-D 1/4 9/32 5/16 11/32 3/8 13/32 7/16 15/32 1/2 1/2 17/32 9/16 9/16 19/32 5/8 5/8 21/32 11/16 11/16 3/4 3/4 25/32 13/16 7/8 29/32 15/16 31/32 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 1 5/8 1 3/4 1 3/4 1 7/8 2 2 2 2 2 2 7/16 7/16 1/2 9/16 5/8 11/16 11/16 3/4 13/16 45/64 7/8 7/8 27/32 15/16 1 15/16 1 1 1/8 1 1/64 1 1/4 1 1/8 1 1/4 1 1/4 1 5/16 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 5/8 1 3/4 1 3/4 1 7/8 2 2 2 1/8 2 1/4 2 3/8 2 3/8 2 1/2 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 1 1 1 1 1/8 1 1/16 1 1/4 1 1/8 1 1/4 1 1/4 1 5/16 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 5/8 1 3/4 1 3/4 1 7/8 2 2 2 1/8 2 1/4 2 3/8 2 3/8 2 1/2 5/32 3/16 3/16 3/16 1/4 1/4 9/32 9/32 11/32 11/32 11/32 7/16 7/16 7/16 7/16 7/16 7/16 7/16 7/16 15/32 15/32 15/32 17/32 9/16 5/8 5/8 5/8 5/8 11/16 3/4 3/4 13/16 13/16 13/16 15/16 1 1 1 1/8 1 1/8 1 1/8 Refer to Page iv for description of Rapid Select. 105 1/2” Square Drive Sockets, SAE 6 Point and Double Hex, Thin Wall, Standard Length Part Number 6 Point A C inches B D Part Number Double Hex 5410 5412 5412-D 5414 5414-D 5416 5416-D 5418 5418-D 5420 5420-D 5421 5421-D HE-2422 HE-2422-D *5422 *5422-D OS-5424** 5424 5424-D 5425 5425-D 5426 5426-D HE-1028 HE-1028-D *5428 *5428-D HE-530 HE-530-D *5430 *5430-D 5432 5432-D 5434 5434-D 5436 5436-D 5438 5438-D 5440 5440-D 5442 5442-D Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 5/16 3/8 7/16 1/2 9/16 5/8 21/32 11/16 11/16 3/4 3/4 25/32 13/16 7/8 7/8 15/16 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 1 5/8 1 3/4 1 3/4 19/32 19/32 21/32 23/32 13/16 7/8 29/32 1 15/16 1 1/32 1 1/32 1 1/16 1 1/8 1 1/4 1 3/16 1 5/16 1 1/4 1 3/8 1 7/16 1 1/2 1 5/8 1 11/16 1 25/32 15/16 15/16 15/16 15/16 15/16 15/16 15/16 1 15/16 1 1/32 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 5/16 1 1/4 1 3/8 1 7/16 1 1/2 1 5/8 1 3/4 1 7/8 1/4 1/4 9/32 11/32 7/16 7/16 7/16 7/16 7/16 15/32 15/32 15/32 17/32 9/16 9/16 5/8 5/8 5/8 11/16 3/4 3/4 13/16 13/16 * Extra thin wall ** No ring groove 106 Refer to Page iv for description of Rapid Select. 1/2” Square Drive Sockets, SAE 6 Point and Double Hex, Long and Extra Long Length Part Number 6 Point A C inches B D 5210 5310 5212 5312 5214 5314 5216 5316 HE-9518 5218 5318 5220 5320 5222 5322 5224 5324 SW-493 5226 5326 5228 5328 5230 5330 5232 5332 5234 5334 5236 5336 5238 5338 5240 5340 5242 5342 5244 5344 5246 5346 5248 5348 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 5212-D 5312-D 5214-D 5314-D 5216-D 5316-D HE-9518-D 5218-D 5318-D 5220-D 5320-D 5222-D 5322-D 5224-D 5324-D SW-493-D 5226-D 5326-D 5228-D 5328-D 5230-D 5330-D 5232-D 5332-D 5234-D 5334-D 5236-D 5336-D 5238-D 5338-D 5240-D 5340-D - 5/16 5/16 3/8 3/8 7/16 7/16 1/2 1/2 9/16 9/16 9/16 5/8 5/8 11/16 11/16 3/4 3/4 3/4 13/16 13/16 7/8 7/8 15/16 15/16 1 1 1 1/16 1 1/16 1 1/8 1 1/8 1 3/16 1 3/16 1 1/4 1 1/4 1 5/16 1 5/16 1 3/8 1 3/8 1 7/16 1 7/16 1 1/2 1 1/2 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 2 1/4 3 1/2 2 1/4 3 1/2 2 1/4 3 1/2 2 1/4 3 1/2 2 3/8 3 1/2 2 3/8 3 1/2 2 3/8 3 1/2 2 1/2 3 1/2 2 1/2 3 1/2 2 1/2 3 5/8 2 1/2 3 5/8 2 1/2 3 3/4 1/2 1/2 5/8 5/8 11/16 11/16 13/16 13/16 7/8 7/8 7/8 1 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 5/16 1 5/16 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 1 3/4 1 3/4 1 3/4 1 3/4 1 7/8 1 7/8 2 2 2 2 2 1/8 2 1/8 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 7/8 15/16 15/16 1 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 5/16 1 5/16 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 1 3/4 1 3/4 1 3/4 1 3/4 1 7/8 1 7/8 2 2 2 2 2 1/8 2 1/8 3/16 3/16 1/4 1/4 9/32 9/32 11/32 11/32 7/16 7/16 7/16 7/16 7/16 7/16 7/16 15/32 15/32 15/32 17/32 17/32 9/16 9/16 5/8 5/8 5/8 5/8 11/16 11/16 3/4 3/4 3/4 3/4 13/16 13/16 13/16 13/16 13/16 13/16 15/16 15/16 1 1 Refer to Page iv for description of Rapid Select. 107 1/2” Square Drive Sockets, SAE 6 Point and Double Hex, Thin Wall, Extra Long Length Part Number 6 Point A C inches B D 5510 5512 5514 5516 OS-5516* 5518 OS-5518* 5520 5522 5524 5526 5528 5530 5532 5534 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 5512-D 5514-D 5516-D 5518-D 5520-D 5522-D 5524-D 5526-D 5528-D 5530-D 5532-D 5534-D 5/16 3/8 7/16 1/2 1/2 9/16 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 1/2 19/32 21/32 23/32 47/64 13/16 13/16 7/8 15/16 1 1/32 1 1/8 1 3/16 1 1/4 1 3/8 1 7/16 15/16 15/16 15/16 15/16 7/8 15/16 27/32 15/16 15/16 1 1/8 1 1/8 1 1/4 1 1/4 1 3/8 1 7 /16 3/16 1/4 9/32 11/32 11/32 7/16 7/16 7/16 7/16 15/32 17/32 9/16 5/8 5/8 11/16 Magnetic, Standard Length Part Number Fixed Magnet A C inches B D M-5108 M-5110 M-5112 M-5114 M-5116 MSH-335 M-5118 MSH-336 M-5120 M-5122 M-5124 M-5126 Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 1/4 5/16 3/8 7/16 1/2 1/2 9/16 9/16 5/8 11/16 3/4 13/16 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 7/16 1/2 5/8 11/16 13/16 45/64 7/8 27/32 1 1 1/8 1 1/8 1 1/4 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 1 1 1/8 1 1/8 1 1/4 5/32 3/16 1/4 9/32 11/32 11/32 7/16 7/16 7/16 7/16 15/32 17/32 Magnetic, Thin Wall, Standard Length Part Number Fixed Magnet A C inches B D 108 M-5412 M-5414 M-5416 M-5418 M-5420 Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3/8 7/16 1/2 9/16 5/8 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 19/32 21/32 23/32 13/16 7/8 15/16 15/16 15/16 15/16 15/16 1/4 9/32 11/32 7/16 7/16 * No ring groove. Refer to Page iv for description of Rapid Select. 1/2” Square Drive Sockets, SAE Magnetic, Long Length and Extra Long Length A C inches B D *Thin Wall Part Number 6 Point Part No. Magnetic Bolt Clearance Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) M-5512* M-5216 M-5316 M-5218 M-5318 M-5518* M-5220 MB-5210 MB-5212 MB-5214 MB-5216 MB-HE9518 MB-5220 5/16 3/8 3/8 7/16 1/2 1/2 9/16 9/16 9/16 9/16 5/8 2 1/4 2 1/4 3 1/4 2 1/4 2 1/4 3 1/4 2 1/4 2 1/4 3 1/4 3 1/4 2 1/4 5/8 5/8 19/32 11/16 13/16 13/16 7/8 7/8 7/8 13/16 1 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 1 1/4 1/4 1/4 9/32 11/32 11/32 7/16 7/16 7/16 7/16 7/16 Surface Drive and Fast Lead, Standard Length Part Number 6 Point A C inches B D SF-5112 SF-5114 SF-5116 SF-SH-335 SF-5118 SF-SH-336 SF-5120 SF-5122 SF-5124 SF-SW-282 SF-5126 SF-5128 SF-5130 SF-5132 SF-5134 Part Number Fast Lead Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) FL-5112 FL-5114 FL-5116 FL-SH-335 FL-5118 FL-SH-336 FL-5120 FL-SH-338 FL-5122 FL-5124 FL-SW-282 FL-5126 FL-5128 FL-5130 FL-5132 FL-5134 3/8 7/16 1/2 1/2 9/16 9/16 5/8 5/8 11/16 3/4 3/4 13/16 7/8 15/16 1 1 1/16 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 5/8 11/16 13/16 45/64 7/8 27/32 1 15/16 1 1/8 1 1/8 1 1/4 1 1/4 1 5/16 1 3/8 1 1/2 1 1/2 15/16 15/16 15/16 15/16 15/16 15/16 1 1 1 1/8 1 1/8 1 1/4 1 1/4 1 5/16 1 3/8 1 1/2 1 1/2 1/4 9/32 11/32 11/32 7/16 7/16 7/16 7/16 7/16 15/32 15/32 17/32 9/16 5/8 5/8 11/16 Surface Drive and Fast Lead, Thin Wall, Standard Length Part Number 6 Point Part Number Fast Lead Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-5412 SF-5414 SF-5416 SF-5418 SF-5420 SF-5422 SF-5424 SF-5426 FL-5414 FL-5416 FL-5418 - 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 19/32 21/32 23/32 13/16 7/8 15/16 1 1/32 1 1/8 15/16 15/16 15/16 15/16 15/16 15/16 1 1/8 1 1/8 1/4 9/32 11/32 7/16 7/16 7/16 15/32 17/32 Refer to Page iv for description of Rapid Select. 109 1/2” Square Drive Sockets, SAE Surface Drive and Fast Lead, Long and Extra Long Length Part Number 6 Point A C inches B D SF-5212 SF-5214 SF-5216 SF-5316 SF-HE9518 SF-5218 SF-5318 SF-5220 SF-5320 SF-5222 SF-5322 SF-5224 SF-5324 SF-5226 SF-5326 SF-5228 SF-5328 SF-5230 SF-5330 SF-5232 SF-5332 SF-5334 Part Number Fast Lead Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) FL-5214 FL-5216 FL-5316 FL- HE9518 FL-5218 FL-5318 FL-5220 FL-5320 FL-5222 FL-5322 FL-5224 FL-SW-493 FL-5324 FL-5226 FL-5326 FL-5228 - 3/8 7/16 1/2 1/2 9/16 9/16 9/16 5/8 5/8 11/16 11/16 3/4 3/4 3/4 13/16 13/16 7/8 7/8 15/16 15/16 1 1 1 1/16 2 1/4 2 1/4 2 1/4 3 1/4 2 1/4 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 2 1/4 3 1/4 2 1/4 3 1/2 2 1/4 3 1/2 2 1/4 3 1/2 2 1/4 3 1/2 3 1/2 9/16 11/16 13/16 13/16 7/8 7/8 7/8 1 1 1 1/8 1 1/8 1 1/8 1 1/4 1 1/8 1 1/4 1 1/4 1 5/16 1 5/16 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 15/16 15/16 15/16 15/16 7/8 15/16 15/16 1 1 1 1/8 1 1/8 1 1/8 1 1/4 1 1/8 1 1/4 1 1/4 1 5/16 1 5/16 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 9/32 9/32 11/32 11/32 7/16 7/16 7/16 7/16 7/16 7/16 7/16 15/32 15/32 15/32 17/32 17/32 9/16 9/16 5/8 5/8 5/8 5/8 11/16 Surface Drive, Thin Wall, Extra Long Length A C inches B D 110 Part Number Surface Drive Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-5514 SF-5516 SF-5518 SF-5520 SF-5522 SF-5524 SF-5526 SF-5528 SF-5532 SF-5534 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 1 1 1/16 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/2 3 1/2 3 1/2 21/32 23/32 13/16 7/8 15/16 1 1/32 1 1/8 1 3/16 1 3/8 1 7/16 15/16 15/16 15/16 15/16 15/16 1 1/8 1 1/8 1 1/4 1 3/8 1 7/16 9/32 11/32 7/16 7/16 7/16 15/32 17/32 9/16 5/8 11/16 Refer to Page iv for description of Rapid Select. 1/2” Square Drive Sockets For SAE Sheet Metal Screws 6 Point and 6 Point Magnetic, for Predrilled Holes* A C inches B D Part Number 6 Point Part Number Magnetic 5E08 5E10 5E12 5E14 5E16 5E18 M5E08 M5E10 M5E12 M5E14 M5E16 M5E18 Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 1/4 5/16 3/8 7/16 1/2 9/16 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 7/16 1/2 5/8 11/16 13/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 5/32 3/16 1/4 9/32 11/32 7/16 6 Point and 6 Point Magnetic, for Self-Tapping Screws* Part Number 6 Point A C inches B D 5P08 5P10 5P12 5P14 5P16 5P18 Part Number Magnetic M5P08 M5P10 M5P12 M5P14 M5P16 M5P18 Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 1/4 5/16 3/8 7/16 1/2 9/16 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 7/16 1/2 5/8 11/16 13/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 5/32 3/16 1/4 9/32 11/32 7/16 *Sockets for predrilled holes are intermediate hardness; sockets for self-tapping screws are maximum hardness. 1/2” Square Drive Sockets For SAE Square Nuts Single Square and Double Square, Standard Length Part Number 6 Point A C inches B D 5608 5609 5610 5612 5614 5616 5618 5620 5622 5624 5626 5628 5632 5634 5636 Part Number Double Square 5608-D 5609-D 5610-D 5612-D 5614-D 5616-D 5618-D 5619-D 5620-D 5622-D 5624-D 5626-D 5628-D 5632-D 5634-D 5636-D Square Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 1/4 9/32 5/16 3/8 7/16 1/2 9/16 19/32 5/8 11/16 3/4 13/16 7/8 1 1 1/16 1 1/8 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 1 3/4 1 3/4 1/2 1/2 5/8 3/4 7/8 1 1 1/8 1 1/8 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 15/16 15/16 15/16 15/16 15/16 1 1 1/8 1 1/8 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 3/16 3/16 1/4 1/4 9/32 11/32 7/16 7/16 7/16 7/16 15/32 17/32 5/8 5/8 11/16 3/4 Refer to Page iv for description of Rapid Select. 111 1/2” Square Drive Sockets For SAE Square Nuts Single Square and Double Square, Thin Wall, Standard Length Part Number Square A C inches B D 5910 5912 5914 5916 5918 5920 Part Number Double Square 5910-D 5912-D 5914-D 5916-D 5918-D 5920-D Square Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 5/16 3/8 7/16 1/2 9/16 5/8 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 19/32 11/16 25/32 15/16 1 1 3 /32 15/16 15/16 15/16 15/16 1 1 1/8 1/4 1/4 9/32 11/32 7/16 7/16 Single Square and Double Square, Long and Extra Long Length Part Number Square A C inches B D 5712 5812 5714 5716 5718 5818 5720 5820 5822 5724 5728 5732 5832 5836 Part Number Double Square 5812-D 5814-D 5716-D 5816-D 5818-D 5820-D 5822-D 5724-D 5826-D 5828-D 5830-D 5832-D 5834-D 5836-D Square Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 3/8 3/8 7/16 7/16 1/2 1/2 9/16 9/16 5/8 5/8 11/16 3/4 13/16 7/8 7/8 1 15/16 1 1 1/16 1 1/8 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 3 1/4 2 1/4 3 1/2 3 1/2 2 1/4 3 1/2 2 1/4 3 1/2 2 1/4 3 1/2 3 1/2 3 1/2 3 1/2 3/4 3/4 7/8 7/8 1 1 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 1 5/8 1 3/4 1 5/8 1 3/4 1 7/8 2 15/16 15/16 15/16 15/16 1 1 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 1 5/8 1 3/4 1 5/8 1 3/4 1 7/8 2 1/4 1/4 9/32 9/32 11/32 7/16 7/16 7/16 7/16 7/16 7/16 15/32 17/32 5/8 5/8 5/8 5/8 5/8 11/16 3/4 1/2” Square Drive Socket Sets, SAE 6 Point APS58 APS510 APS58XL 112 8 piece, standard length: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 10 piece, standard length: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 8 piece, extra long length: 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 Refer to Page iv for description of Rapid Select. Universal Wrenches 1/2” Square Drive, SAE 6 Point and Double Hex A E D C B Part Number 6 Point Part Number Double Hex Hex Opening In. Overall Length (A) In. Socket Length (B) In. SA-216 SA-217 SA-316 SA-218 SA-317 SA-219 SA-318 SA-221 SA-320 SA-402 SA-321 SA-322 SA-404 SA-501 SA-406 SA-407 SA-409 SA-505 SA-410 SA-411 SA-508 SA-510 SA-216-D SA-217-D SA-218-D SA-219-D SA-318-D SA-221-D SA-320-D SA-402-D SA-321-D SA-322-D SA-404-D SA-409-D - 3/8 7/16 7/16 1/2 1/2 9/16 9/16 5/8 5/8 5/8 11/16 3/4 3/4 3/4 13/16 7/8 15/16 15/16 1 1 1/16 1 1/8 1 1/4 2 11/64 2 15/64 2 17/64 2 19/64 2 31/64 2 23/64 2 29/64 2 27/64 2 33/64 2 49/64 2 37/64 2 37/64 2 57/64 3 1/32 2 57/64 2 57/64 2 57/64 3 5/32 2 61/64 3 1/64 3 9/32 3 13/32 7/8 15/16 15/16 1 1 1 1/16 1 1/8 1 1/8 1 3/16 1 1/4 1 1/4 1 1/4 1 3/8 1 5/8 1 3/8 1 3/8 1 3/8 1 3/4 1 7/16 1 1/2 1 7/8 2 Socket Diameter (C) In. 7/8 7/8 1 7/8 1 7/8 1 7/8 1 1 1/4 1 1 1/8 1 1/4 1 1/2 1 1/4 1 3/16 1 5/16 1 1/2 1 1/2 1 1/2 1 5/8 1 3/4 Nose End Diameter (D) In. 9/16 5/8 5/8 11/16 11/16 3/4 3/4 7/8 27/32 7/8 1 1 1/8 1 1/32 1 1/8 1 1/8 1 5/16 1 5/16 1 3/8 1 1/2 1 1/2 1 5/8 1 3/4 Clearance Depth (E) In. 11/32 13/32 3/8 15/32 7/16 17/32 9/16 19/32 5/8 33/64 11/16 11/16 5/8 25/32 41/64 41/64 41/64 29/32 45/64 49/64 1 1/32 1 5/32 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 1/2” Square Drive Universal Wrench Set, SAE 6 Point APU56 6 piece, standard length: 7/16, 1/2, 9/16, 5/8, 11/16, 3/4 Refer to Page iv for description of Rapid Select. 113 Universal Wrenches 1/2” Square Drive, SAE – Extension 6 Point, Standard and Tension Type Part Number Standard Tension Type Standard Type A E B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 114 DC KH-43-3 KH-43-6 KH-43-9 KH-44-3 KH-44-4 KH-44-6 KH-44-9 KH-45-3 KH-45-4 KH-45-6 KH-104-3 KH-104-4 KH-104-6 KH-104-9 KH-104-12 KH-202-3 KH-202-6 KH-202-12 KH-105-3 KH-105-4 KH-105-6 KH-105-12 KH-203-3 KH-203-4 KH-203-6 KH-203-9 KH-203-12 KH-318-3 KH-318-4 KH-318-6 KH-318-9 KH-205-3 KH-205-4 KH-205-6 KH-205-9 KH-205-12 KH-320-3 Part Number Tension Hex Opening In. KN-43-6 KN-43-9 KN-44-4 KN-44-6 KN-44-12 KN-45-6 KN-45-9 KN-104-6 KN-104-9 KN-104-12 KN-202-6 KN-202-8 KN-202-12 KN-105-6 KN-105-9 KN-105-12 KN-203-6 KN-203-9 KN-203-12 KN-318-3 KN-318-4 KN-318-6 KN-205-6 KN-205-9 KN-205-12 - 3/8 3/8 3/8 7/16 7/16 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 9/16 5/8 5/8 5/8 5/8 5/8 5/8 Refer to Page iv for description of Rapid Select. Shank Length (A) In. 3 6 9 3 4 6 9 12 3 4 6 9 3 4 6 9 12 3 6 9 12 3 4 6 9 12 3 4 6 9 12 3 4 6 9 3 4 6 9 12 3 Socket Length (B) In. 13/16 13/16 13/16 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 7/8 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1/16 1 1/16 1 1/16 1 1/16 1 1/16 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 3/16 Socket Diameter (C) In. 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 11/16 11/16 11/16 11/16 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 13/16 13/16 13/16 13/16 13/16 7/8 7/8 7/8 7/8 7/8 1 1 1 1 7/8 7/8 7/8 7/8 7/8 1 Nose End Diameter (D) In. 17/32 17/32 17/32 5/8 5/8 5/8 5/8 5/8 11/16 11/16 11/16 11/16 3/4 3/4 3/4 3/4 3/4 11/16 11/16 11/16 11/16 13/16 13/16 13/16 13/16 13/16 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 7/8 7/8 7/8 7/8 7/8 27/32 Opening Depth (E) In. 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 9/16 15/32 15/32 15/32 15/32 9/16 9/16 9/16 9/16 9/16 17/32 17/32 17/32 17/32 17/32 9/16 9/16 9/16 9/16 19/32 19/32 19/32 19/32 19/32 5/8 Universal Wrenches 1/2” Square Drive, SAE – Extension 6 Point, Standard and Tension Type (continued) Part Number Standard Tension Type Standard Type A E DC B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. KH-320-6 KH-320-9 KH-320-12 KH-321-3 KH-321-4 KH-321-6 KH-321-9 KH-321-12 KH-322-3 KH-322-4 KH-322-6 KH-322-9 KH-322-12 KH-404-3 KH-404-4 KH-404-6 KH-404-9 KH-404-12 KH-409-3 KH-409-4 KH-409-6 KH-409-9 KH-409-12 Part Number Tension Hex Opening In. KN-320-6 KN-320-9 KN-320-12 KN-321-6 KN-321-9 KN-322-6 KN-322-9 KN-322-12 KN-404-6 KN-404-9 KN-404-12 - 5/8 5/8 5/8 11/16 11/16 11/16 11/16 11/16 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 15/16 15/16 15/16 15/16 15/16 Shank Length (A) In. 6 9 12 3 4 6 9 12 3 4 6 9 12 3 4 6 9 12 3 4 6 9 12 Socket Length (B) In. 1 3/16 1 3/16 1 3/16 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 1 3/8 Socket Diameter (C) In. 1 1 1 1 1 1 1 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 5/16 1 5/16 1 5/16 1 5/16 1 5/16 Nose End Diameter (D) In. 27/32 27/32 27/32 1 1 1 1 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/32 1 1/32 1 1/32 1 1/32 1 1/32 1 5/16 1 5/16 1 5/16 1 5/16 1 5/16 Clearance Depth (E) In. 5/8 5/8 5/8 11/16 11/16 11/16 11/16 11/16 11/16 11/16 11/16 11/16 11/16 41/64 41/64 41/64 41/64 41/64 41/64 41/64 41/64 41/64 41/64 1/2” Square Drive Socket Head Bits, SAE Complete, Adapter Only, Insert Only Complete A SZ-22 SZ-23 SZ-24 SZ-25 SZ-42 SZ-43 SZ-44 SZ-26 Part Number Adapter Only Insert Only Hex Size In. mm SC-514 SC-514 SC-514 SC-514 SC-520 SC-514 SC-529 SC-514 SZ-14-A SZ-15-A SZ-16-A SZ-17-A SZ-31-A SZ-18-A SZ-32-A SZ-19-A 1/4 5/16 3/8 1/2 1/2 9/16 9/16 5/8 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 64 64 64 64 64 64 64 64 Overall Length Length of Insert (A) In. mm 1 3/8 1 3/8 1 3/8 1 3/8 1 9/16 1 3/8 1 9/16 1 3/8 35 35 35 35 35 35 35 35 For a complete listing, see page 36. Adapters with an “SC” prefix feature a set screw for locking in the bit. An “RP” prefix indicates adapters with a roll pin that is inserted through the bit. Refer to Page iv for description of Rapid Select. 115 1/2” Square Drive Sockets, Metric 6 Point and Double Hex, Standard Length Part Number 6 Point A C mm B D 10mm15 11mm15 12mm15 13mm15 14mm15 15mm15 16mm15 17mm15 18mm15 19mm15 20mm15 21mm15 22mm15 23mm15 24mm15 25mm15 26mm15 27mm15 28mm15 29mm15 30mm15 32mm15 33mm15 34mm15 35mm15 36mm15 Part Number Double Hex Hex Opening mm. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 10mm15-D 11mm15-D 12mm15-D 13mm15-D 14mm15-D 15mm15-D 16mm15-D 17mm15-D 18mm15-D 19mm15-D 20mm15-D 21mm15-D 22mm15-D 23mm15-D 24mm15-D 25mm15-D 26mm15-D 27mm15-D 28mm15-D 29mm15-D 30mm15-D 32mm15-D - 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 33 34 35 36 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 41.3 41.3 41.3 41.3 44.4 44.4 47.6 47.6 47.6 16.7 17.5 19.1 22.2 22.2 23.8 25.4 28.6 28.6 28.6 31.7 31.7 33.3 34.9 34.9 38.1 38.1 41.3 41.3 44.4 44.4 44.4 47.6 47.5 50.8 50.8 23.8 23.8 23.8 23.8 23.8 23.8 25.4 28.6 28.6 28.6 31.7 31.7 33.3 34.9 34.9 38.1 38.1 41.3 41.3 44.4 44.4 44.4 47.6 47.5 50.8 50.8 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 11.9 13.5 14.3 15.9 15.9 15.9 15.9 17.5 19.1 19.1 19.1 20.6 20.6 20.5 20.6 23.8 6 Point and Double Hex, Thin Wall, Standard Length Part Number 6 Point A C mm B D 116 10mm45 11mm45 12mm45 13mm45 14mm45 15mm45 16mm45 17mm45 18mm45 19mm45 20mm45 21mm45 22mm45 Part Number Double Hex Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 10mm45-D 11mm45-D 12mm45-D 13mm45-D 14mm45-D 15mm45-D 16mm45-D 17mm45-D 18mm45-D 19mm45-D 21mm45-D 22mm45-D 10 11 12 13 14 15 16 17 18 19 20 21 22 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 15.9 16.7 17.5 18.7 20.6 22.2 22.2 23.8 25.4 26.3 27.0 28.6 30.2 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8 25.4 26.3 28.6 28.6 31.7 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 11.9 13.5 14.3 Refer to Page iv for description of Rapid Select. 1/2” Square Drive Sockets, Metric 6 Point and Double Hex, Long Length Part Number 6 Point A C mm B D 10mm25 11mm25 12mm25 13mm25 14mm25 15mm25 16mm25 17mm25 18mm25 19mm25 20mm25 21mm25 22mm25 23mm25 24mm25 25mm25 26mm25 27mm25 28mm25 29mm25 30mm25 32mm25 Part Number Double Hex Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 10mm25-D 11mm25-D 12mm25-D 13mm25-D 15mm25-D 16mm25-D 17mm25-D 18mm25-D 19mm25-D 20mm25-D 21mm25-D 22mm25-D 23mm25-D 24mm25-D 29mm25-D 30mm25-D - 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 32 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 60.3 60.3 60.3 60.3 63.5 16.7 17.5 19.1 22.2 22.2 23.8 25.4 28.6 28.6 28.6 31.7 31.7 33.3 34.9 34.9 38.1 38.1 41.3 41.3 44.4 44.4 44.4 23.8 23.8 23.8 23.8 23.8 23.8 25.4 28.6 28.6 28.6 31.7 31.7 33.3 34.9 34.9 38.1 38.1 41.3 41.3 44.4 44.4 44.4 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 11.9 13.5 14.3 15.9 15.9 15.9 15.9 17.5 19.1 19.1 19.1 20.6 6 Point and Double Hex, Extra Long Length Part Number 6 Point A C mm B D 10mm35 11mm35 12mm35 13mm35 14mm35 15mm35 16mm35 17mm35 18mm35 19mm35 20mm35 21mm35 22mm35 23mm35 24mm35 25mm35 Part Number Double Hex Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 10mm35-D 11mm35-D 12mm35-D 13mm35-D 14mm35-D 15mm35-D 16mm35-D 17mm35-D 18mm35-D 19mm35-D 20mm35-D 21mm35-D 22mm35-D 24mm35-D - 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 88.9 88.9 88.9 88.9 88.9 88.9 16.7 17.5 19.1 22.2 22.2 23.8 25.4 28.6 28.6 28.6 31.7 31.7 33.3 34.9 34.9 38.1 23.8 23.8 23.8 23.8 23.8 23.8 25.4 28.6 28.6 28.6 31.7 31.7 33.3 34.9 34.9 38.1 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 11.9 13.5 14.3 15.9 15.9 15.9 Refer to Page iv for description of Rapid Select. 117 1/2” Square Drive Sockets, Metric 6 Point and Double Hex, Thin Wall, Extra Long Length Part Number 6 Point A C mm B D 10mm55 11mm55 12mm55 13mm55 14mm55 15mm55 16mm55 17mm55 18mm55 19mm55 20mm55 21mm55 22mm55 23mm55 24mm55 26mm55 27mm55 28mm55 29mm55 30mm55 32mm55 Part Number Double Hex Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 10mm55-D 12mm55-D 13mm55-D 14mm55-D 15mm55-D 16mm55-D 17mm55-D 18mm55-D 19mm55-D 21mm55-D 22mm55-D 24mm55-D 27mm55-D - 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30 32 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 88.9 88.9 88.9 88.9 88.9 88.9 88.9 88.9 88.9 88.9 15.9 16.7 17.5 18.7 20.6 22.2 22.2 23.8 25.4 26.3 28.6 28.6 30.2 31.7 33.3 34.9 36.5 36.5 38.1 39.7 42.9 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8 25.4 26.3 28.6 28.6 31.7 31.7 33.3 34.9 38.1 38.1 38.1 41.1 42.9 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 11.9 13.5 14.3 15.9 15.9 15.9 17.5 19.1 19.1 19.1 20.6 Magnetic, Standard Length A C mm B D 118 Part Number Fixed Magnet Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) M-10mm15 M-11mm15 M-12mm15 M-13mm15 M-14mm15 M-15mm15 M-16mm15 M-17mm15 M-18mm15 M-19mm15 M-21mm15 10 11 12 13 14 15 16 17 18 19 21 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 16.7 17.5 19.1 22.2 22.2 23.8 25.4 28.6 28.5 28.6 31.7 23.8 23.8 23.8 23.8 23.8 23.8 25.4 28.6 28.5 28.6 31.7 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 13.5 Refer to Page iv for description of Rapid Select. 1/2” Square Drive Sockets, Metric Magnetic, Thin Wall, Standard Length A C mm B D Part Number Fixed Magnet Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) M-10mm45 M-11mm45 M-12mm45 M-13mm45 M-14mm45 M-15mm45 M-16mm45 10 11 12 13 14 15 16 38.1 38.1 38.1 38.1 38.1 38.1 38.1 15.9 16.7 17.4 18.7 20.6 22.2 22.2 23.8 23.8 23.8 23.8 23.8 23.8 23.8 6.4 7.2 7.2 8.7 11.1 11.1 11.1 Magnetic, Long Length Part No. Fixed Magnet A C mm B D M-13mm25 M-15mm25 M-18mm25 Part No. Magnetic Bolt Clearance MB-10mm25 MB-12mm25 MB-13mm25 MB-14mm25 MB-15mm25 MB-16mm25 MB-18mm25 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 10 12 13 14 15 16 18 57.1 57.1 57.1 57.1 57.1 57.1 57.1 16.7 19.1 22.2 22.2 23.8 25.4 28.6 23.8 23.8 23.8 23.8 23.8 25.4 28.5 6.4 7.2 8.7 11.1 11.1 11.1 11.1 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 12 13 13 15 18 18 82.5 82.5 82.5 82.5 82.5 82.5 19.1 22.2 18.7 23.8 28.6 25.4 23.8 23.8 23.8 23.8 28.6 25.4 7.2 8.7 8.7 11.1 11.1 11.1 Magnetic, Extra Long Length Part No. Fixed Magnet A C mm B D M-12mm35 M-13mm35 M-13mm55* M-15mm35 M-18mm35 M-18mm55* Part No. Magnetic Bolt Clearance MB-15mm35 MB-18mm35 - *Thin Wall Refer to Page iv for description of Rapid Select. 119 1/2” Square Drive Sockets, Metric Surface Drive, Standard Length A C mm B D Part Number Surface Drive Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-10mm15 SF-11mm15 SF-12mm15 SF-13mm15 SF-14mm15 SF-15mm15 SF-16mm15 SF-17mm15 SF-18mm15 SF-19mm15 SF-20mm15 SF-21mm15 SF-22mm15 SF-23mm15 SF-24mm15 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 16.7 17.5 19.1 22.2 22.2 23.8 25.4 28.6 28.6 28.6 31.7 31.7 33.3 34.9 34.9 23.8 23.8 23.8 23.8 23.8 23.8 25.4 28.6 28.6 28.6 31.7 31.7 33.3 34.9 34.9 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 11.9 13.5 14.3 15.9 15.9 Surface Drive, Thin Wall, Standard Length A C mm B D 120 Part Number Surface Drive Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-10mm45 SF-11mm45 SF-12mm45 SF-13mm45 SF-14mm45 SF-15mm45 SF-16mm45 SF-17mm45 SF-18mm45 SF-19mm45 SF-20mm45 SF-21mm45 SF-22mm45 10 11 12 13 14 15 16 17 18 19 20 21 22 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 38.1 15.9 16.7 17.5 18.7 20.6 22.2 22.2 23.8 25.4 26.3 27.0 28.6 30.2 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8 25.4 26.3 28.6 28.6 31.7 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 11.9 11.9 11.9 Refer to Page iv for description of Rapid Select. 1/2” Square Drive Sockets, Metric Surface Drive, Long Length A C mm B D Part Number Surface Drive Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-10mm25 SF-11mm25 SF-12mm25 SF-13mm25 SF-14mm25 SF-15mm25 SF-16mm25 SF-17mm25 SF-18mm25 SF-19mm25 SF-21mm25 SF-22mm25 SF-23mm25 SF-24mm25 10 11 12 13 14 15 16 17 18 19 21 22 23 24 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 57.1 16.7 17.5 19.1 22.2 22.2 23.8 25.4 28.6 28.6 28.6 31.7 33.3 34.9 34.9 23.8 23.8 23.8 23.8 23.8 23.8 25.4 28.6 28.6 28.6 31.7 33.3 34.9 34.9 6.4 7.2 7.2 7.2 11.1 11.1 11.1 11.1 11.1 11.9 13.5 14.3 15.9 15.9 Surface Drive, Extra Long Length A C mm B D Part Number Surface Drive Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-10mm35 SF-12mm35 SF-13mm35 SF-14mm35 SF-15mm35 SF-16mm35 SF-17mm35 SF-18mm35 SF-19mm35 SF-21mm35 SF-22mm35 SF-23mm35 SF-24mm35 10 12 13 14 15 16 17 18 19 21 22 23 24 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 88.9 88.9 88.9 88.9 16.7 17.5 19.1 22.2 23.8 25.4 28.6 28.6 28.6 31.7 33.3 34.9 34.9 23.8 23.8 23.8 23.8 23.8 25.4 28.6 28.6 28.6 31.7 33.3 34.9 34.9 6.4 7.2 7.2 11.1 11.1 11.1 11.1 11.1 11.9 13.5 14.3 15.9 15.9 Refer to Page iv for description of Rapid Select. 121 1/2” Square Drive Sockets, Metric Surface Drive, Thin Wall, Extra Long Length A C mm B D Part Number Surface Drive Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-10mm55 SF-11mm55 SF-12mm55 SF-13mm55 SF-14mm55 SF-15mm55 SF-16mm55 SF-17mm55 SF-18mm55 SF-19mm55 SF-21mm55 SF-22mm55 SF-24mm55 10 11 12 13 14 15 16 17 18 19 21 22 24 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 82.5 88.9 88.9 88.9 15.9 16.7 17.5 18.7 20.6 22.2 22.2 23.8 25.4 26.3 28.6 30.2 33.3 23.8 23.8 23.8 23.8 23.8 23.8 23.8 23.8 25.4 26.3 28.6 31.7 33.3 6.4 7.2 7.2 8.7 11.1 11.1 11.1 11.1 11.1 11.9 13.5 15.9 15.9 1/2” Square Drive Sockets For Metric Sheet Metal Screws 6 Point and 6 Point Magnetic, For Regular Screws Part Number 6 Point 13mmE5 15mmE5 Part Number Magnetic Hex Opening mm. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) M-13mmE5 M-15mmE5 13 15 38.1 38.1 22.2 23.8 23.8 23.8 8.7 11.1 A C mm B D 1/2” Square Drive Socket Sets, Metric 6 Point APS58M 8 piece, standard length: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm APS511M 11 piece, standard length: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm APS58XLM 8 piece, extra long length: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 21mm 122 1/2” Square Drive Universal Wrenches, Metric 6 Point Part Number 6 Point A E D C B SA-57-13m SA-57-14m SA-58-15m SA-58-16m SA-58-17m SA-58-18m SA-510-19m SA-510-20m SA-510-21m SA-510-22m SA-510-23m SA-510-24m Hex Opening mm Overall Length (A) mm Socket Length (B) mm Socket Diameter (C) mm Nose End Diameter (D) mm Clearance Depth (E) mm 13 14 15 16 17 18 19 20 21 22 23 24 58 60 62 64 66 66 73 73 73 73 73 73 25.4 27.0 28.6 30.2 31.8 31.8 34.9 34.9 34.9 34.9 34.9 34.9 22.2 22.2 25.4 25.4 25.4 25.4 31.8 31.8 31.8 31.8 31.8 31.8 17.5 19.1 19.8 21.4 25.4 25.4 26.2 27.0 28.6 31.8 33.3 34.9 11.9 13.5 14.3 15.9 17.5 17.5 16.3 16.3 16.3 16.3 16.3 16.3 1/2” Square Drive Universal Wrench Set, Metric 6 Point APU56M 6 piece, standard length: 13mm, 14mm, 15mm, 16mm, 17mm, 18mm 1/2” Square Drive Universal Wrenches, Metric – Extension 6 Point, Standard and Tension Type Part Number Standard Tension Type Standard Type A E B DC KH-7-12m-3 KH-7-12m-4 KH-7-12m-6 KH-7-12m-9 KH-7-12m-12 KH-7-13m-3 KH-7-13m-4 KH-7-13m-6 Part Number Tension Hex Opening mm Shank Length (A) mm Socket Length (B) mm Socket Diameter (C) mm Nose End Diameter (D) mm Clearance Depth (E) mm KN-7-12m-6 KN-7-12m-9 KN-7-13m-6 12 12 12 12 12 13 13 13 76 102 152 229 305 76 102 152 23.8 23.8 23.8 23.8 23.8 25.4 25.4 25.4 22.2 22.2 22.2 22.2 22.2 22.2 22.2 22.2 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 10.3 10.3 10.3 10.3 10.3 11.9 11.9 11.9 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. Refer to Page iv for description of Rapid Select. 123 1/2” Square Drive Universal Wrenches, Metric – Extension 6 Point, Standard and Tension Type (continued) Part Number Standard Tension Type Standard Type A E DC B Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. KH-7-13m-9 KH-7-13m-12 KH-7-14m-4 KH-7-14m-6 KH-7-14m-12 KH-8-15m-3 KH-8-15m-4 KH-8-15m-6 KH-8-15m-9 KH-8-15m-12 KH-8-16m-3 KH-8-16m-4 KH-8-16m-6 KH-8-16m-9 KH-8-16m-12 KH-8-17m-3 KH-8-17m-4 KH-8-17m-6 KH-8-17m-9 KH-8-18m-3 KH-8-18m-4 KH-8-18m-6 KH-8-18m-9 KH-10-19m-3 KH-10-19m-4 KH-10-19m-6 KH-10-19m-9 KH-10-19m-12 Part Number Tension Hex Opening mm Shank Length (A) mm Socket Length (B) mm Socket Diameter (C) mm Nose End Diameter (D) mm Clearance Depth (E) mm KN-7-13m-9 KN-7-13m-12 KN-7-14m-6 KN-7-14m-9 KN-8-15m-6 KN-8-15m-9 KN-8-15m-12 KN-8-16m-6 KN-8-16m-9 KN-8-16m-12 KN-8-17m-6 KN-8-17m-9 KN-8-18m-6 KN-8-18m-9 KN-8-18m-12 - 13 13 14 14 14 14 15 15 15 15 15 16 16 16 16 16 17 17 17 17 18 18 18 18 18 19 19 19 19 19 229 305 102 152 229 305 76 102 152 229 305 76 102 152 229 305 76 102 152 229 76 102 152 229 305 76 102 152 229 305 25.4 25.4 27.0 27.0 27.0 27.0 28.6 28.6 28.6 28.6 28.6 30.2 30.2 30.2 30.2 30.2 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 31.8 34.9 34.9 34.9 34.9 34.9 22.2 22.2 22.2 22.2 22.2 22.2 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 31.8 31.8 31.8 31.8 31.8 17.5 17.5 19.1 19.1 19.1 19.1 19.8 19.8 19.8 19.8 19.8 21.4 21.4 21.4 21.4 21.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 25.4 26.2 26.2 26.2 26.2 26.2 11.9 11.9 13.5 13.5 13.5 13.5 14.3 14.3 14.3 14.3 14.3 15.9 15.9 15.9 15.9 15.9 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 17.5 16.3 16.3 16.3 16.3 16.3 1/2” Square Drive Socket Head Bits, Metric Complete, Adapter Only, Insert Only Complete A SZ-5-7-8mm SZ-5-7-10mm SZ-5-7-12mm SZ-5-7-14mm SZ-5-10-14mm SZ-5-10-17mm Part Number Adapter Only Insert Only Hex Size SC-514 SC-514 SC-514 SC-514 RP-520 RP-520 SZ-7-8mm SZ-7-10mm SZ-7-12mm SZ-7-14mm SZ-10-14mm SZ-10-17mm 8mm 10mm 12mm 14mm 14mm 17mm For a complete listing, see page 38. 124 Refer to Page iv for description of Rapid Select. Overall Length In. mm 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 2 1/2 64 64 64 64 64 64 Length of Insert (A) In. mm 1 3/8 1 3/8 1 3/8 1 3/8 1 9/16 1 9/16 35 35 35 35 40 40 1/2” Square Drive Sockets For Spline Fasteners Standard and Long Length Part Number A C B Spline Size Nominal Size 16 20 22 24 26 26 28 30 30 1/2 5/8 11/16 3/4 13/16 13/16 7/8 15/16 15/16 CMS-5416 CMS-5420 CMS-5422 CMS-5424 CMS-5426 CMS-5526 CMS-5428 CMS-5430 CMS-5530 Overall Length (A) In. mm 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 3 1/4 1 1/2 1 1/2 3 1/4 32 38 38 38 38 83 38 38 83 Diameter Nose End (B) In. mm 23/32 7/8 31/32 1 1/32 1 1/8 1 1/8 1 3/16 1 1/4 1 1/4 18 22 25 26 29 29 30 32 32 Diameter Drive End (C) In. mm 7/8 7/8 31/32 1 1/32 1 1/8 1 1/8 1 3/16 1 1/4 1 1/4 22 22 25 26 29 29 30 32 32 Apex spline sockets conform to military specifications MS-37787 and MIL-W-8982C. 1/2” Square Drive Torx® Sockets For External Torx Screws A C B Part Number Driver Size TX-5110 TX-5112 TX-5114 TX-5116 TX-5118 TX-5120 TX-5124 E-10 E-12 E-14 E-16 E-18 E-20 E-24 Overall Length (A) In. mm 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 38 38 38 38 38 38 38 Diameter Nose End (B) In. mm 9/16 5/8 11/16 13/16 7/8 1 1 5/16 13 16 18 21 22 25 33 Diameter Drive End (C) In. mm 1 1 1 1 1 1 3/16 1 5/16 25 25 25 25 25 30 33 For External Torx Screws, Thin Wall A C B Part Number Driver Size TX-5408 TX-5410 TX-5412 TX-5414 TX-5416 TX-5418 TX-5420 E-8 E-10 E-12 E-14 E-16 E-18 E-20 Overall Length (A) In. mm 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 Refer to Page iv for description of Rapid Select. 38 38 38 38 38 38 38 Diameter Nose End (B) In. mm 3/8 1/2 9/16 5/8 7/8 15/16 1 1/16 10 13 14 16 22 24 27 Diameter Drive End (C) In. mm 7/8 7/8 7/8 7/8 7/8 15/16 1 1/16 22 22 22 22 22 24 27 125 1/2” Square Drive Extensions 1 23/32” to 18” (44mm to 457mm) Length Part Number Male Square In. Type of Lock In. 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Pin 1 23/32 1 23/32 2 2 3 3 4 4 5 5 6 6 8 8 9 9 10 10 12 12 15 15 16 18 EX-504 EX-504-B EX-508-2 EX-508-B-2 EX-508-3 EX-508-B-3 EX-508-4 EX-508-B-4 EX-508-5 EX-508-B-5 EX-508-6 EX-508-B-6 EX-508-8 EX-508-B-8 EX-508-9 EX-508-B-9 EX-508-10 EX-508-B-10 EX-508-12 EX-508-B-12 EX-508-15 EX-508-B-15 EX-508-16 EX-508-18 Overall Length mm 44 44 51 51 76 76 102 102 127 127 152 152 203 203 229 229 254 254 305 305 381 381 406 457 1/2” Square Drive Adapters 1/4” to 3/8” Male Square Part Number EX-260 EX-260-B EX-258-2 EX-258-B-2 EX-258-4 EX-258-6 EX-375 EX-375-B EX-377-2 EX-377-B-2 EX-377-3 EX-377-B-3 EX-377-4 EX-377-B-4 Male Square In. Female Square In. Type of Lock In. mm 1/4 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Pin Ball Pin Ball Pin Pin Pin Ball Pin Ball Pin Ball Pin Ball 1 1/2 1 1/2 2 2 4 6 1 1/2 1 1/2 2 2 3 3 4 4 38 38 51 51 102 152 38 38 51 51 76 76 102 102 (Continued on next page.) Refer to Page iv for description of Rapid Select. 126 Overall Length 1/2” Square Drive Adapters 3/8” to 3/4” Male Square (continued) Part Number EX-377-5 EX-377-B-5 EX-377-6 EX-377-B-6 EX-377-8 EX-377-B-9 EX-377-10 EX-377-B-10 EX-377-12 EX-377-B-12 EX-377-15 EX-623 EX-623-B EX-626-3 EX-626-4 EX-626-6 EX-751 EX-751-B Male Square In. Female Square In. Type of Lock In. Overall Length mm 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 5/8 5/8 5/8 5/8 5/8 3/4 3/4 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Pin Ball Pin Ball Pin Ball Pin Ball Pin Ball Pin Pin Ball Pin Pin Pin 7/32 Drill Hole Ball 5 5 6 6 8 9 10 10 12 12 15 1 1/2 1 1/2 3 4 6 1 13/16 1 13/16 127 127 152 152 203 229 254 254 305 305 381 38 38 76 102 152 46 46 1/2” Square Drive Universal Adapters 3/8” to 3/4” Male Square Part Number MF-39 MF-39B MF-50 MF-50B MF-55 MF-55B MF-70 MF-70B Male Square In. Female Square In. Type of Lock 3/8 3/8 1/2 1/2 1/2 1/2 3/4 3/4 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 Pin Ball Pin Ball Pin Ball 7/32 Drill Hole Ball Overall Length In. mm 2 9/16 2 9/16 2 11/16 2 11/16 3 1/16 3 1/16 3 5/8 3 5/8 65 65 68 68 78 78 92 92 Largest Diameter in. mm 7/8 7/8 1 1 1 1/4 1 1/4 1 1/2 1 1/2 22 22 25 25 32 32 38 38 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 1/2” Square Drive Universal Adapters – Extension 1/2” Male Square Standard (Standard Type Shown) Part Number Tension KHM-37-6 KHM-38-6 KHM-50-6 KHM-50-B-6 KNM-37-6 KNM-38-6 KNM-50-6 KNM-50-B-6 Male Sq. In. Female Sq. In. Type of Lock 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 Pin Pin Pin Ball Largest Diameter In. mm 3/4 7/8 1 1 19 22 25 25 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. Standard lengths are 3”, 6”, 9” and 12” (76, 152, 229 and 305mm) Refer to Page iv for description of Rapid Select. 127 5/8” Square Drive Sockets, SAE 6 Point and Double Hex, Standard Length Part Number 6 Point A C inches B D 6116 6118 6120 6122 6124 6126 6128 6130 6132 6134 6136 6138 6140 6142 6144 6146 6148 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 6116-D 6118-D 6120-D 6122-D 6124-D 6130-D - 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 2 2 2 2 2 2 2 2 1/8 2 1/8 2 1/4 13/16 7/8 1 1 1/8 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 1 5/8 1 5/8 1 3/4 1 7/8 2 2 2 1/8 2 1/8 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 1 5/8 1 5/8 1 3/4 1 7/8 2 2 2 1/8 2 1/8 11/32 7/16 7/16 7/16 15/32 17/32 9/16 5/8 5/8 11/16 3/4 3/4 13/16 13/16 13/16 15/16 1 6 Point and Double Hex, Thin Wall Standard Length Part Number 6 Point A C inches B D 128 6414 6418 6420 6424 6426 6428 6430 6432 6434 6436 6440 6444 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 6414-D 6420-D 6424-D 6428-D 6430-D - 7/16 9/16 5/8 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 1/4 1 3/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 2 2 2 2 2 2 1/8 11/16 7/8 15/16 1 1/16 1 1/8 1 3/16 1 5/16 1 3/8 1 1/2 1 1/2 1 3/4 1 7/8 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 5/16 1 3/8 1 1/2 1 1/2 1 3/4 1 7/8 9/32 7/16 7/16 15/32 17/32 9/16 5/8 5/8 11/16 3/4 13/16 13/16 Refer to Page iv for description of Rapid Select. 5/8” Square Drive Sockets, SAE 6 Point and Double Hex, Extra Long Length Part Number 6 Point A C inches B D 6320 6322 6324 6326 6328 6330 6332 6334 6336 6338 6340 6342 6344 6346 6348 6352 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 6322-D 6324-D 6326-D 6330-D 6332-D 6334-D 6336-D 6340-D 6344-D 6346-D 6352-D 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 5/8 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 3/4 1 1 1/8 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 1 5/8 1 5/8 1 3/4 1 7/8 2 2 2 1/8 2 1/8 2 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 1 5/8 1 5/8 1 3/4 1 7/8 2 2 2 1/8 2 1/8 2 1/4 7/16 7/16 15/32 17/32 9/16 5/8 5/8 11/16 3/4 3/4 13/16 13/16 13/16 15/16 1 1 1/8 6 Point and Double Hex, Thin Wall, Extra Long Length Part Number 6 Point A C inches B D 6520 6522 6524 6526 6528 6530 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 6520-D 6522-D 6524-D 6528-D 6530-D 5/8 11/16 3/4 13/16 7/8 15/16 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 15/16 1 1 1/16 1 1/8 1 3/16 1 5/16 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 5/16 7/16 7/16 15/32 17/32 9/16 5/8 Surface Drive and Fast Lead, Standard Length A C inches B D Part No. Surface Drive Part Number Fast Lead Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-6118 SF-6418* SF-6120 SF-6122 SF-6124 SF-6424* SF-6126 SF-6128 SF-6130 - FL-6120 FL-6124 FL-6128 FL-6132 9/16 9/16 5/8 11/16 3/4 3/4 13/16 7/8 15/16 1 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 2 2 7/8 7/8 1 1 1/8 1 1/4 1 1/16 1 1/4 1 3/8 1 1/2 1 5/8 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 7/16 7/16 7/16 7/16 15/32 15/32 17/32 9/16 5/8 5/8 *Thin Wall Refer to Page iv for description of Rapid Select. 129 5/8” Square Drive Sockets, SAE Surface Drive and Fast Lead, Extra Long Length Part No. Surface Drive A C inches B SF-6320 SF-6520* SF-6522* SF-6324 SF-6524* SF-6326 SF-6526* SF-6328 SF-6330 Part Number Fast Lead Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) FL-6320 FL-6324 FL-6326 FL-6328 FL-6330 5/8 5/8 11/16 3/4 3/4 13/16 13/16 7/8 15/16 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 3 1/2 1 15/16 1 1 1/4 1 1/16 1 1/4 1 1/8 1 3/8 1 1/2 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 1/4 1 3/8 1 1/2 7/16 7/16 7/16 15/32 15/32 17/32 17/32 9/16 5/8 *Thin Wall D 5/8” Square Drive Universal Wrenches, SAE 6 Point A E D C B Part Number 6 Point Hex Opening In. Overall Length (A) In. Socket Length (B) In. Socket Diameter (C) In. Nose End Diameter (D) In. Clearance Depth (E) In. SA-430 SA-432 SA-434 SA-436 SA-563 SA-439 SA-565 SA-568 9/16 5/8 3/4 13/16 7/8 15/16 15/16 1 1/8 2 59/64 2 59/64 3 3/64 3 3/64 3 1/8 3 3/64 3 1/8 3 1/4 1 1/4 1 1/4 1 3/8 1 3/8 1 3/4 1 3/8 1 3/4 1 7/8 1 1/4 1 1/4 1 1/4 1 1/4 1 1/2 1 5/16 1 1/2 1 5/8 2 5/32 7/8 1 1/32 1 1/8 1 5/16 1 5/16 1 3/8 1 5/8 33/64 33/64 41/64 41/64 29/32 41/64 29/32 1 1/32 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. Budd Wheel Socket Combo. 13/16” Square 1 1/2” Hex Part Number BW-648 130 Overall Length Drive In. mm 5/8” Square 3 76 Refer to Page iv for description of Rapid Select. 5/8” Square Drive Sockets, Metric 6 Point and Surface Drive, Standard Length Part Number 6 Point A C mm B 15mm16 16mm16 17mm16 18mm16 19mm16 20mm16 21mm16 22mm16 23mm16 24mm16 Part No. Surface Drive Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-15mm16 SF-16mm16 SF-17mm16 SF-18mm16 SF-19mm16 SF-21mm16 SF-22mm16 SF-24mm16 15 16 17 18 19 20 21 22 23 24 48 48 48 48 48 48 48 48 48 51 23.8 25.4 28.6 28.5 31.8 31.8 31.8 34.9 34.9 38.1 31.8 31.8 31.8 31.8 31.8 31.8 31.8 34.9 34.9 38.1 11.1 11.1 11.1 11.1 11.9 11.9 13.5 14.3 15.9 15.9 D 6 Point and Surface Drive, Extra Long Length Part Number 6 Point 15mm36 17mm36 18mm36 19mm36 21mm36 22mm36 23mm36 24mm36 Part No. Surface Drive Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) SF-15mm36 SF-18mm36 SF-19mm36 SF-21mm36 SF-22mm36 SF-24mm36 15 17 18 19 21 22 23 24 89 89 89 89 89 89 89 89 23.8 25.4 28.6 31.8 31.8 34.9 34.9 38.1 31.8 31.8 31.8 31.8 31.8 34.9 34.9 38.1 11.1 11.1 11.1 11.9 13.5 14.3 15.9 15.9 5/8” Square Drive Extensions 1 7/8” to 15” (48mm to 381mm) Length Part Number EX-624 EX-624-B EX-627-3 EX-627-4 EX-627-6 EX-627-8 EX-627-10 EX-627-12 EX-627-15 Male Square In. Type of Lock In. 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 Pin Ball Pin Pin Pin Pin Pin Pin Pin 1 7/8 1 7/8 3 4 6 8 10 12 15 Refer to Page iv for description of Rapid Select. Overall Length mm 48 48 76 102 152 203 254 305 381 131 5/8” Square Drive Adapters 1/2” to 3/4” Male Square Part Number EX-505 EX-505-B EX-509-3 EX-509-4 EX-509-5 EX-509-6 EX-509-10 EX-509-12 EX-752 EX-752-B Male Square In. Female Square In. Type of Lock In. Overall Length mm 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 3/4 3/4 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 5/8 Pin Ball Pin Pin Pin Pin Pin Pin 7/32 Drill Hole Ball 1 7/8 1 7/8 3 4 5 6 10 12 1 7/8 1 7/8 48 48 76 102 127 152 254 305 48 48 5/8” Square Drive Universal Adapters 1/2” to 5/8” Male Square Part Number MF-51 MF-51B MF-62 MF-62B Male Square In. Female Square In. Type of Lock 1/2 1/2 5/8 5/8 5/8 5/8 5/8 5/8 Pin Ball Pin Ball Overall Length In. mm 3 5/16 3 5/16 3 1/4 3 1/4 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 132 84 84 83 83 Largest Diameter in. mm 1 1/4 1 1/4 1 1/4 1 1/4 32 32 32 32 3/4” Square Drive Sockets, SAE 6 Point and Double Hex, Standard Length Part Number 6 Point A C inches B D 7116 7118 7120 7122 7124 7126 7128 7130 7132 7134 7136 7138 7140 7142 7144 7146 7148 7150 7152 7154 7156 7158 7160 7162 7164 7166 7168 7170 7172 7174 7176 7178 7180 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 7120-D 7122-D 7124-D 7126-D 7128-D 7130-D 7132-D 7134-D 7136-D 7138-D 7140-D 7142-D 7144-D 7148-D 7150-D 7152-D 7154-D 7156-D 7158-D 7160-D 7164-D 7166-D 7168-D 7170-D 7172-D 7176-D 7180-D 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/16 2 1/8 2 3/16 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 2 2 2 2 2 2 2 2 2 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 3/8 2 3/8 2 3/8 2 1/2 2 1/2 2 1/2 2 5/8 2 5/8 2 5/8 13/16 7/8 1 1/16 1 1/8 1 1/4 1 3/8 1 1/2 1 1/2 1 5/8 1 3/4 1 3/4 1 7/8 2 2 2 1/8 2 1/4 2 1/4 2 3/8 2 1/2 2 1/2 2 5/8 2 3/4 2 3/4 2 7/8 2 7/8 3 3 1/8 3 1/8 3 1/4 3 3/8 3 1/2 3 1/2 3 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 1 3/4 1 3/4 1 3/4 1 3/4 1 3/4 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 11/32 7/16 7/16 7/16 15/32 17/32 9/16 5/8 5/8 11/16 3/4 3/4 13/16 13/16 13/16 15/16 1 1 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 3/8 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 1 5/8 Refer to Page iv for description of Rapid Select. 133 3/4” Square Drive Sockets, SAE 6 Point and Double Hex, Thin Wall, Standard Length Part Number 6 Point A C inches B D 134 7424 7426 7428 7430 7432 7434 7436 7438 7440 7442 7444 7446 7448 7450 7452 7454 7456 7458 7460 7464 7466 7470 7472 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 7424-D 7428-D 7430-D 7432-D 7434-D 7436-D 7438-D 7440-D 7442-D 7448-D - 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 2 2 1/16 2 3/16 2 1/4 2 2 2 2 2 2 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 3/8 2 3/8 2 3/8 2 3/8 1 1/8 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 5/8 1 5/8 1 3/4 1 7/8 2 2 2 1/8 2 3/16 2 1/4 2 3/8 2 7/16 2 1/2 2 5/8 2 3/4 2 13/16 3 3 1 3/8 1 3/8 1 3/8 1 3/8 1 7/16 1 1/2 1 5/8 1 5/8 1 3/4 1 3/4 1 3/4 1 3/4 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 5/8 2 5/8 2 5/8 15/32 17/32 9/16 5/8 5/8 11/16 3/4 3/4 13/16 13/16 13/16 15/16 1 1 1/8 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 3/8 1 3/8 1 3/8 1 3/8 Refer to Page iv for description of Rapid Select. 3/4” Square Drive Sockets, SAE 6 Point and Double Hex, Extra Long Length Part Number 6 Point A C inches B D 7320 7322 7324SKT 7326 7328 7330 7332 7334 7336 7338 7340 7342 7344 7346 7348 7350 7352 7354 7356 7358 7360 7362 7364 7372 7376 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 7322-D 7324-D 7328-D 7330-D 7332-D 7334-D 7336-D 7338-D - 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/4 2 3/8 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1/8 4 1/4 4 1/4 1 1/16 1 1/8 1 1/4 1 3/8 1 7/16 1 1/2 1 1/2 1 5/8 1 3/4 1 3/4 1 7/8 2 2 1/8 2 1/8 2 1/4 2 3/8 2 1/2 2 1/2 2 5/8 2 3/4 2 3/4 2 3/4 2 7/8 3 1/4 3 3/8 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 1 3/4 1 3/4 1 3/4 1 3/4 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 7/16 7/16 15/32 17/32 9/16 5/8 5/8 11/16 3/4 3/4 13/16 13/16 13/16 15/16 1 1 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 3/8 1 1/2 1 5/8 6 Point and Double Hex, Thin Wall, Extra Long Length Part Number 6 Point A C inches B D 7524 7526 7528 7530 7532 7534 7536 7538 7540 7542 7544 7546 7548 7552 7556 7564 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 7530-D 7532-D 7534-D 7536-D - 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 5/8 1 3/4 2 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1/8 1 1/8 1 1/4 1 3/8 1 3/8 1 7/16 1 1/2 1 5/8 1 11/16 1 3/4 1 7/8 2 2 2 1/8 2 1/4 2 1/2 2 3/4 1 3/8 1 3/8 1 3/8 1 3/8 1 7/16 1 1/2 1 5/8 1 11/16 1 3/4 1 3/4 1 3/4 1 3/4 2 1/8 2 1/8 2 1/8 2 1/8 15/32 17/32 9/16 5/8 5/8 11/16 3/4 3/4 13/16 13/16 13/16 15/16 1 1 1/8 1 1/8 1 3/8 Refer to Page iv for description of Rapid Select. 135 3/4” Square Drive Sockets For SAE Square Nuts Single Square and Double Square, Standard Length Part No. Single Square A C inches B D 7620 7622 7624 7626 7628 7630 7632 7636 - Part No. Double Square 7624-D 7626-D 7628-D 7630-D 7632-D 7634-D 7636-D 7638-D 7640-D 7642-D Square Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 2 2 2 2 2 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 2 1/8 2 1/4 2 1/4 2 1/2 1 1/2 1 1/2 1 1/2 1 5/8 1 3/4 1 3/4 1 3/4 1 3/4 2 1/8 2 1/8 2 1/8 2 1/8 7/16 7/16 15/32 17/32 5/8 5/8 5/8 11/16 3/4 5/8 5/8 5/8 3/4” Square Drive Universal Wrenches, SAE 6 Point A E D C B Part Number 6 Point Hex Opening In. SA-535 SA-601 SA-537 SA-603 SA-743 SA-538 SA-604 SA-606 SA-607 SA-609 SA-610 SA-712 SA-716 15/16 15/16 1 1/16 1 1/16 1 1/16 1 1/8 1 1/8 1 1/4 1 5/16 1 7/16 1 1/2 1 5/8 1 7/8 Overall Length (A) In. Socket Length (B) In. 3 25/32 4 1/32 3 29/32 4 3/32 3 31/32 3 29/32 4 5/32 4 7/32 4 7/32 4 11/32 4 11/32 4 11/32 4 11/32 1 3/4 1 15/16 1 7/8 2 2 1 7/8 2 1/16 2 1/8 2 1/8 2 1/4 2 1/4 2 3/8 2 3/8 Socket Diameter (C) In. 1 1/2 1 3/4 1 5/8 1 3/4 2 1 5/8 1 3/4 1 7/8 1 7/8 2 1/8 2 1/4 2 3/8 2 5/8 Nose End Diameter (D) In. 1 3/8 1 1/2 1 5/8 1 5/8 1 11/16 1 5/8 1 3/4 1 7/8 1 7/8 2 1/8 2 1/4 2 3/8 2 5/8 Clearance Depth (E) In. 29/32 29/32 1 1/32 31/32 1 3/16 1 1/32 1 1/32 1 3/32 1 3/32 1 5/32 1 5/32 1 3/16 1 3/16 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 3/4” Square Drive Budd Wheel Sockets 13/16” Square and Combo. 13/16” Square – 1 1/2” Hex Part Number BW-7626 BW-748 136 Drive 3/4” Square 3/4” Square In. Overall Length mm 2 3 3/8 Refer to Page iv for description of Rapid Select. 51 86 13/16” Square Combo. 13/16 Square – 1 1/2” Hex 3/4” Square Drive Sockets, Metric 6 Point, Standard Length Part Number 6 Point A C mm B D Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 17 18 19 20 21 22 22 23 24 24 25 26 27 27 28 29 30 30 32 32 33 34 35 36 37 38 41 46 51 51 51 51 51 51 51 51 51 51 51 51 51 51 54 54 54 54 54 54 54 54 54 57 57 57 57 57 31.8 31.8 31.8 33.3 34.9 38.1 33.3 38.1 38.1 34.9 41.3 41.3 44.4 38.1 44.4 47.6 47.6 41.3 50.8 44.4 50.8 54.0 54.0 57.1 57.1 57.1 63.5 69.9 38.1 38.1 38.1 38.1 38.1 38.1 34.9 38.1 38.1 34.9 41.3 41.3 44.4 38.1 44.4 44.4 44.4 41.3 44.4 44.4 44.4 54.0 54.0 54.0 54.0 54.0 54.0 54.0 11.2 11.2 11.9 11.9 13.5 14.3 14.3 15.9 15.9 15.9 15.9 15.9 17.5 17.5 19.1 19.1 19.1 19.1 20.6 20.6 20.6 20.6 20.6 23.8 23.8 25.4 31.8 31.8 17mm17 18mm17 19mm17 20mm17 21mm17 22mm17 22mm47* 23mm17 24mm17 24mm47* 25mm17 26mm17 27mm17 27mm47* 28mm17 29mm17 30mm17 30mm47* 32mm17 32mm47* 33mm17 34mm17 35mm17 36mm17 37mm17 38mm17 41mm17 46mm17 *Thin Wall 3/4” Square Drive Sockets, Metric 6 Point , Extra Long Length Part Number 6 Point A C mm B D 21mm37 21mm57* 22mm37 22mm57* 23mm37 24mm37 24mm57* 25mm37 26mm37 27mm37 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 21 21 22 22 23 24 24 25 26 27 102 102 102 102 102 102 102 102 102 102 34.9 34.9 36.5 34.9 38.1 38.1 34.9 38.1 41.3 41.3 38.1 34.9 38.1 34.9 38.1 38.1 34.9 38.1 41.3 41.3 13.5 13.5 14.3 14.3 15.9 15.9 15.9 15.9 15.9 17.5 *Thin Wall Refer to Page iv for description of Rapid Select. 137 3/4” Square Drive Sockets, Metric 6 Point , Extra Long Length (continued) Part Number 6 Point A C mm B D Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 27 28 29 30 30 32 33 34 35 36 41 101.6 101.6 101.6 101.6 101.6 101.6 101.6 101.6 101.6 101.6 101.6 38.1 44.4 44.4 44.4 42.9 47.6 50.8 54.0 54.0 54.0 63.5 38.1 44.4 44.4 44.4 42.9 44.4 44.4 54.0 54.0 54.0 54.0 17.5 19.1 19.1 19.1 19.1 20.6 20.6 20.6 20.6 23.8 28.6 27mm57* 28mm37 29mm37 30mm37 30mm57* 32mm37 33mm37 34mm37 35mm37 36mm37 41mm37 *Thin Wall 3/4” Square Drive Sockets for Spline Fasteners Standard Length Part Number CMS-7426 CMS-7428 CMS-7430 CMS-7432 A C Spline Size Nominal Size 26 28 30 32 13/16 7/8 15/16 1 Overall Length (A) In. mm 1 3/4 1 13/16 1 7/8 1 15/16 Diameter Nose End (B) In. mm 45 46 48 49 1 1/8 1 1/4 1 3/8 1 7/16 29 32 35 37 1 3/8 1 3/8 1 3/8 1 7/16 Apex spline sockets conform to military specifications MS-37787 and MIL-W-8982C. B 3/4” Square Drive Extensions 2 1/4” to 15” (57mm to 381mm) Length Part Number EX-753 EX-753-B EX-755-4 EX-755-B-4 EX-755-6 EX-755-B-6 EX-755-8 EX-755-B-8 EX-755-10 EX-755-B-10 EX-755-12 EX-755-B-12 EX-755-15 EX-755-B-15 138 Male Square In. Type of Lock In. 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole Ball 2 1/4 2 1/4 4 4 6 6 8 8 10 10 12 12 15 15 Diameter Drive End (C) In. mm Overall Length mm 57 57 102 102 152 152 203 203 254 254 305 305 381 381 35 35 35 37 3/4” Square Drive Adapters 1/2” to 1” Male Square Part Number Male Square In. Female Square In. Type of Lock In. 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 1 1 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 Pin Ball Pin Ball Pin Ball Ball Pin Ball Pin Ball Pin Ball Pin 9/32 Drill Hole Ball 2 2 3 3 4 4 5 6 6 8 8 2 2 3 2 9/16 2 9/16 EX-506 EX-506-B EX-510-3 EX-510-B-3 EX-510-4 EX-510-B-4 EX-510-B-5 EX-510-6 EX-510-B-6 EX-510-8 EX-510-B-8 EX-625 EX-625-B EX-628-3 EX-1000 EX-1000-B Overall Length mm 51 51 76 76 102 102 127 152 152 203 203 51 51 76 65 65 3/4” Square Drive Universal Adapters 3/4” Male Square Part Number MF-75 MF-75B MF-76 MF-76B MF-79 MF-79B Male Sq. In. Female Sq. In. Type of Lock 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole Ball Overall Length In. mm 4 4 4 3/8 4 3/8 4 1/2 4 1/2 102 102 111 111 114 114 Largest Diameter In. mm 1 1/2 1 1/2 1 3/4 1 3/4 2 2 38 38 45 45 51 51 139 1” Square Drive Sockets, SAE 6 Point and Double Hex , Standard Length Part Number 6 Point A C inches B D 140 8124 8126 8128 8130 8132 8134 8136 8138 8140 8142 8144 8146 8148 8152 8154 8158 8160 8162 8164 8166 8168 8170 8172 8174 8176 8178 8180 8182 8184 8186 8188 8190 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 8124-D 8128-D 8130-D 8132-D 8134-D 8136-D 8138-D 8140-D 8142-D 8144-D 8146-D 8148-D 8150-D 8154-D 8156-D 8160-D 8162-D 8164-D - 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/16 2 1/8 2 3/16 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 9/16 2 5/8 2 11/16 2 3/4 2 13/16 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 1/4 2 3/8 2 3/8 2 3/8 2 1/2 2 1/2 2 1/2 2 5/8 2 5/8 2 5/8 2 3/4 2 3/4 2 3/4 2 7/8 2 7/8 2 7/8 3 3 3 3 1/8 3 1/8 1 5/16 1 3/8 1 1/2 1 1/2 1 5/8 1 11/16 1 3/4 2 1/8 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 3/8 2 1/2 2 1/2 2 5/8 2 3/4 2 3/4 2 7/8 3 3 3 1/8 3 1/4 3 1/4 3 3/8 3 1/2 3 1/2 3 3/4 3 3/4 3 3/4 4 4 4 2 2 2 2 2 2 2 2 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 13/16 13/16 13/16 13/16 13/16 13/1 13/16 13/16 13/16 13/16 13/16 15/16 15/16 15/16 15/16 15/16 1 1/16 1 1/16 1 1/16 1 1/16 1 3/16 1 3/16 1 3/16 1 5/16 1 5/16 1 3/8 1 3/8 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 Refer to Page iv for description of Rapid Select. 1” Square Drive Sockets, SAE 6 Point and Double Hex, Thin Wall Standard Length Part Number 6 Point A C inches B D 8430 8432 8434 8436 8438 8440 8442 8444 8446 8448 8452 8454 8456 8458 8460 8464 8468 8472 8480 Part Number Double Hex Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 8430-D 8432-D 8434-D 8436-D 8438-D 8440-D 8442-D 8444-D 8446-D 8448-D - 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 2 2 1/8 2 1/4 2 1/2 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 3/8 2 3/8 2 3/8 2 1/2 2 1/2 2 5/8 2 5/8 2 3/4 2 7/8 1 7/16 1 1/2 1 9/16 1 5/8 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/8 2 5/16 2 3/8 2 7/16 2 9/16 2 5/8 2 3/4 2 15/16 3 1/8 3 3/8 1 7/8 1 7/8 1 7/8 1 7/8 2 2 2 2 2 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 5/8 2 5/8 2 5/8 2 5/8 3 1/4 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 15/16 15/16 15/16 15/16 1 1/16 1 1/16 1 1/16 1 3/16 1 3/16 1 5/16 1 7/16 6 Point, Long Length A C inches B D Part Number 6 Point Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 8226 8228 8230 8232 8236 8240 8242 8244 8246 8248 13/16 7/8 15/16 1 1 1/8 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 3 3 3 3 3 3 3 3 3 3 1/4 1 3/8 1 7/16 1 1/2 1 5/8 1 3/4 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 17/32 9/16 5/8 5/8 3/4 13/16 13/16 13/16 15/16 15/16 141 1” Square Drive Sockets, SAE 6 Point, Extra Long Length A C inches B D Part Number 6 Point Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 8324 8326 8328 8330 8332 8334 8336 8338 8340 8342 8344 8346 8348 8350 8352 8354 8356 8358 8360 8362 8364 8366 8368 8370 8372 8374 8376 8378 8380 8382 8384 8386 8388 8390 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/16 2 1/8 2 3/16 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 9/16 2 5/8 2 11/16 2 3/4 2 13/16 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 3/8 4 3/8 4 3/8 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 1/2 4 5/8 4 5/8 1 1/4 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 3/4 1 7/8 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 3/8 2 1/2 2 1/2 2 5/8 2 3/4 2 3/4 2 7/8 2 7/8 3 3 1/8 3 1/8 3 1/4 3 3/8 3 1/2 3 1/2 3 1/2 3 3/4 3 3/4 4 4 4 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 15/32 17/32 9/16 5/8 5/8 11/16 3/4 3/4 13/16 13/16 13/16 15/16 1 1 1 1/8 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 3/8 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 1 5/8 1 3/4 1 3/4 1 3/4 1 7/8 1 7/8 6 Point, Thin Wall, Extra Long Length A C inches B D 142 Part Number 6 Point Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 8528 8530 8534 8536 8540 8542 8548 7/8 15/16 1 1/16 1 1/8 1 1/4 1 5/16 1 1/2 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 4 1/4 1 7/16 1 1/2 1 9/16 1 5/8 1 13/16 1 7/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 9/16 5/8 3/4 3/4 13/16 13/16 1 Refer to Page iv for description of Rapid Select. 1” Square Drive Sockets, SAE Single Square and Double Square, Standard Length Part No. Single Square A C inches B D 8620 8624 8626 8628 8630 8632 8634 8636 8638 8640 8642 8644 8646 8648 8650 8652 8654 8656 8658 8660 8662 8664 Part No. Double Square 8622-D 8624-D 8626-D 8628-D 8630-D 8632-D 8634-D 8636-D 8638-D 8640-D 8644-D 8646-D 8648-D 8652-D 8654-D 8664-D Square Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 5/8 11/16 3/4 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 1/4 2 1/4 2 5/16 2 3/8 2 3/8 2 3/8 2 1/2 2 1/2 2 1/2 2 5/8 2 5/8 2 5/8 2 3/4 1 3/8 1 1/2 1 5/8 1 3/4 2 2 1/8 2 1/8 2 1/8 2 1/4 2 1/4 2 3/8 2 1/2 2 5/8 2 5/8 2 3/4 2 3/4 2 7/8 3 1/4 3 1/2 3 1/2 3 1/2 3 3/4 3 3/4 2 2 2 2 2 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 1/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 13/16 13/16 13/16 13/16 13/16 13/16 13/16 13/16 15/16 15/16 15/16 15/16 1 1 1 1/16 1 1/16 1 1/16 1 1/8 1 1/8 1 1/4 1 1/4 1 1/4 1 5/16 Budd Wheel Sockets 13/16” Square and Combo. 13/16” Square 1 1/2” Hex Part Number BW-8626 BW-848 BW-848-F Drive 1” Square 1” Square 1” Square In. Overall Length mm 2 1/8 3 3/4 3 3/4 54 95 95 13/16” Square Combo. 13/16 Square—1 1/2” Hex Combo. 13/16 Square—1 1/2” Hex for mag. wheels 143 1” Square Drive Sockets, Metric 6 Point, Standard Length Part Number 6 Point A C mm B D 21mm18 22mm18 23mm18 24mm18 25mm18 26mm18 27mm18 28mm18 29mm18 30mm18 30mm48* 32mm18 33mm18 34mm18 35mm18 36mm18 37mm18 38mm18 41mm18 42mm18 46mm18 47mm18 48mm18 50mm18 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 21 22 23 24 25 26 27 28 29 30 30 32 33 34 35 36 37 38 41 42 46 47 48 50 54 54 54 54 54 54 54 54 54 54 54 54 54 54 54 57 57 57 60 60 64 64 64 66 34.9 38.1 38.1 38.1 41.3 41.3 42.9 44.4 47.6 50.8 44.4 54.0 54.0 54.0 54.0 57.1 57.1 57.1 63.5 63.5 69.8 69.8 69.8 76.2 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 50.8 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 66.7 66.7 66.7 66.7 13.5 14.2 20.6 20.6 20.6 20.6 20.6 20.6 20.6 20.6 20.6 20.6 20.6 20.6 20.6 23.9 23.9 23.9 23.9 23.9 26.9 26.9 26.9 30.2 Hex Opening mm Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 21 23 24 27 28 29 32 33 35 36 37 38 41 46 47 50 108 108 108 108 108 108 108 108 108 108 108 108 108 108 108 111 34.9 36.5 38.1 41.3 44.4 47.6 54.0 54.0 54.0 54.0 57.1 57.1 63.5 69.8 69.8 73.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 54.0 66.7 66.7 66.7 13.5 15.9 15.9 17.5 19.1 19.1 20.6 20.6 20.6 23.8 23.8 25.4 28.6 31.8 31.8 34.9 *Thin Wall 6 Point, Long Length Part Number 6 Point A C mm B D 144 21mm38 23mm38 24mm38 27mm38 28mm38 29mm38 32mm38 33mm38 35mm38 36mm38 37mm38 38mm38 41mm38 46mm38 47mm38 50mm38 1” Square Drive Sockets for Spline Fasteners Standard Length Part Number CMS-8432 CMS-8434 Spline Size Nominal Size 32 34 1 1 1/16 Overall Length (A) In. mm 2 7/16 2 1/2 62 64 Diameter Nose End (B) In. mm 1 7/16 1 17/32 37 39 Diameter Drive End (C) In. mm 2 2 51 51 Apex spline sockets conform to military specifications MS-37787 and MIL-W-8982C. A C B 1” Square Drive Extensions 2 13/16” to 15” (71mm to 381mm) Length Part Number EX-1001 EX-1001-B EX-1003-4 EX-1003-B-4 EX-1003-6 EX-1003-B-6 EX-1003-8 EX-1003-B-8 EX-1003-10 EX-1003-B-10 EX-1003-12 EX-1003-B-12 EX-1003-15 EX-1003-B-15 Male Square In. Type of Lock In. Overall Length mm 1 1 1 1 1 1 1 1 1 1 1 1 1 1 9/32 Drill Hole Ball 9/32 Drill Hole Ball 9/32 Drill Hole Ball 9/32 Drill Hole Ball 9/32 Drill Hole Ball 9/32 Drill Hole Ball 9/32 Drill Hole Ball 2 13/16 2 13/16 4 4 6 6 8 8 10 10 12 12 15 15 71 71 102 102 152 152 203 203 254 254 305 305 381 381 145 1” Square Drive Adapters 3/4” to 1 1/2” Male Square Part Number Male Square In. Female Square In. Type of Lock In. 3/4 3/4 3/4 3/4 3/4 3/4 3/4 3/4 1 1/2 1 1 1 1 1 1 1 1 1 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole Ball 7/32 Drill Hole Ball 3/8 Drill Hole 2 13/16 2 13/16 4 4 6 6 8 8 3 9/16 EX-754 EX-754-B EX-756-4 EX-756-B-4 EX-756-6 EX-756-B-6 EX-756-8 EX-756-B-8 EX-1101 Overall Length mm 71 71 102 102 152 152 203 203 91 1” Square Drive Universal Adapters 3/4” to 1” Male Square Part Number MF-77 MF-77B MF-82 MF-82B Male Sq. In. Female Sq. In. Type of Lock Overall Length In. mm 3/4 3/4 1 1 1 1 1 1 7/32 Drill Hole Ball 9/32 Drill Hole Ball 4 3/4 4 3/4 5 5 Largest Diameter In. mm 121 121 127 127 2 2 2 2 51 51 51 51 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. 1 1/4” Square Drive Adapter 1” Male Square Part Number EX-1008 146 Male Square In. Female Square In. Type of Lock In. Overall Length mm 1 1 1/4 9/32 Drill Hole 3 1/4 83 1 1/2” Square Drive Sockets, SAE 6 Point, Standard Length A C inches B D Part Number 6 Point Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 9140 9142 9144 9146 9148 9150 9152 9154 9156 9158 9160 9162 9164 9166 9168 9170 9172 9174 9176 9178 9180 9182 9184 9186 9190 9192 9194 9196 9198 91100 91102 91104 91106 91108 91110 91112 91116 91120 91124 91128 91132 91136 91140 91144 91152 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 2 1/16 2 1/8 2 3/16 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 9/16 2 5/8 2 11/16 2 13/16 2 7/8 2 15/16 3 3 1/16 3 1/8 3 3/16 3 1/4 3 5/16 3 3/8 3 7/16 3 1/2 3 5/8 3 3/4 3 7/8 4 4 1/8 4 1/4 4 3/8 4 1/2 4 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 3/4 2 7/8 2 7/8 2 7/8 3 3 3 3 1/8 3 1/8 3 1/8 3 1/4 3 1/4 3 1/4 3 3/8 3 3/8 3 3/8 3 1/2 3 1/2 3 1/2 3 5/8 3 5/8 3 5/8 3 5/8 3 5/8 3 7/8 3 7/8 4 4 4 4 1/8 4 1/4 4 1/4 4 1/4 4 1/4 4 3/8 4 1/2 4 3/4 4 3/4 4 7/8 5 1/8 2 1/4 2 5/16 2 3/8 2 7/16 2 1/2 2 5/8 2 3/4 2 13/16 2 7/8 3 3 1/8 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 3/8 3 3/8 3 1/2 3 1/2 3 3/4 3 3/4 4 4 4 1/4 4 1/2 4 1/2 4 1/2 4 3/4 4 3/4 4 3/4 5 5 5 5 1/4 5 1/4 5 1/4 5 1/2 5 3/4 5 3/4 6 6 6 1/2 6 1/2 6 3/4 3 3 3 3 3 3 3 3 3 3 3 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1 1/4 1 1/4 1 1/4 1 1/4 1 1 1 1/8 1 1/8 1 1/8 1 3/8 1 1/4 1 1/4 1 3/8 1 3/8 1 3/8 1 1/2 1 1/2 1 1/2 1 5/8 1 5/8 1 5/8 1 3/4 1 3/4 1 3/4 1 7/8 1 7/8 1 7/8 1 7/8 1 7/8 2 1/8 2 1/8 2 1/4 2 1/4 2 1/4 2 3/8 2 1/2 2 1/2 2 1/2 2 1/2 2 5/8 2 3/4 3 3 3 1/8 3 3/8 147 1 1/2” Square Drive Adapters 1” Male Square Part Number EX-1005 EX-1005-B Male Square In. Female Square In. Type of Lock In. Overall Length mm 1 1 1 1/2 1 1/2 9/32 Drill Hole Ball 3 15/16 3 15/16 100 100 2 1/2” Square Drive Sockets, SAE 6 Point, Standard Length A C inches B D Part Number 6 Point Hex Opening In. Overall Length (A) Diameter Nose End (B) Diameter Drive End (C) Opening Depth (D) 0172 0176 0180 0184 0188 0192 01100 01112 01116 01120 01124 01128 01136 01144 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 2 7/8 3 1/8 3 1/2 3 5/8 3 3/4 3 7/8 4 4 1/4 4 1/2 4 1/8 4 1/8 4 1/8 4 1/8 4 1/8 4 1/8 4 3/8 4 3/4 4 3/4 4 3/4 4 3/4 4 7/8 5 1/4 5 3/8 3 3/4 3 7/8 4 4 4 1/4 4 1/2 4 7/8 5 1/2 5 1/2 5 3/4 6 6 6 6 1/2 5 5 5 5 5 5 5 5 1/2 5 1/2 5 3/4 6 6 6 6 1 1/2 1 3/4 1 3/4 1 7/8 1 7/8 1 7/8 2 1/8 2 1/2 2 1/2 2 1/2 2 1/2 2 5/8 3 3 1/8 2 1/2” Square Drive Adapter 1 1/2” Male Square Part Number EX-1105 148 Male Square In. Female Square In. Type of Lock In. Overall Length mm 1 1/2 2 1/2 3/8 Drill Hole 5 3/8 137 Solutions Does Apex offer sockets for the installation of grease fittings? What’s the real advantage of using socket adapters? Specially designed Apex sockets are the easy way to install or remove grease fittings. Socket adapters are an easy and economical solution for applications that require several different nut sizes. (See page 153) (See pages 158 & 159) What’s the advantage of a male hex drive socket? Does Apex offer tap holding sockets? Apex offers a wide variety of tap holding adapters. These adapters allow you to easily convert your power tool into a tap drill. (See page 152) A male hex drive socket lets you quickly accommodate a different nut size without pulling the primary socket off the power tool. (See page 160) 149 Notes 150 Reversible Sockets for SAE Hex Head Sheet Metal Screws Standard *Tapered Ends Part Number Hex Size Overall Length Outside Diameter Roll Pin Part Number SW-350 SW-90 SW-90-B* SW-984 SH-575 SH-400 SH-401 SH-402 1/4 1/4 1/4 5/16 11/32 3/8 7/16 13/16 9/16 9/16 9/16 9/16 9/16 11/16 23/32 3/4 3/8 7/16 7/16 9/16 9/16 11/16 3/4 13/16 21-S-078-0375 21-S-078-0437 21-S-078-0437 21-S-078-0562 21-S-078-0562 21-S-078-0687 21-S-078-0750 21-S-078-0750 Part Number Hex Size Overall Length Outside Diameter Spring Pin Part Number 1/4 1/4 1/4 5/16 5/16 11/32 3/8 7/16 13/16 31/32 31/32 31/32 31/32 31/32 31/32 1 1/8 1 5/32 1 3/16 3/8 7/16 7/16 9/16 9/16 9/16 11/16 3/4 13/16 21-S-078-0375 21-S-078-0437 21-S-078-0437 21-S-078-0562 21-S-078-0562 21-S-078-0562 21-S-078-0687 21-S-078-0750 21-S-078-0750 Magnetic *Tapered Ends MSW-350 MSW-90 MSW-90-B* MSW-984 MSW-984-B* MSH-575 MSH-400 MSH-401 MSH-402 Shanks for Reversible Sockets Part Number Male Hex Power Drive Male Hex Size Overall Length SH-629 SH-629-P SH-629-3 SH-629-4 SH-629-5 SH-629-6 SH-57 SH-57-3 SH-57-4 SH-57-6 SH-57-8 SH-59 SH-59-3 SH-59-4 SH-59-6 SH-412 SH-413 SH-414 SH-913 SH-404 SH-406 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 7/16 7/16 7/16 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 5/16 5/16 5/16 5/16 3/8 7/16 1/2 5/16 3/8 1/2 2 2 3 4 5 6 2 3 4 6 8 2 3 4 6 2 2 2 2 2 2 Refer to Page iv for description of Rapid Select. Pin Lock Full Length Hex Full Length Hex Full Length Hex Full Length Hex Full Length Hex 151 Tap Holding Sockets Male Hex Drive, SAE (Tap not included) Part Number Tap Size Male Hex In. Socket Length mm SJ-935-1/4 SJ-935-5/16 SJ-935-3/8FS SJ-935-7/16 SJ-935-1/2 1/4 5/16 3/8 7/16 1/2 7/16 1/2 9/16 5/8 3/4 15/16 15/16 1 1 1 1/4 24 24 25 25 32 Socket Diameter In. mm 5/8 5/8 21/32 3/4 7/8 16 16 17 19 22 Male Hex Drive, Metric (Tap not included) Part Number Tap Size Male Hex In. Socket Length mm SJ-935-10MXM6 SJ-935-12MXM8 SJ-935-14MXM10 SJ-935-17MXM8 SJ-935-17MXM12 M6 M8 M10 M8 M12 10 12 14 17 17 15/16 15/16 1 1 1 24 24 25 25 25 Socket Diameter In. mm 5/8 5/8 21/32 13/16 13/16 16 16 17 21 21 Female Square Drive, SAE Part Number Tap Size Female Square In. HC-100-10 HC-100-1/4 HC-100-5/16 HC-100-3/8FS HC-100-7/16 HC-100-1/2 HC-100-5/8 HC-100-3/4 HE-100-1/4 HE-100-5/16 HE-100-3/8FS HE-100-7/16 HE-100-1/2 HE-100-5/8 HE-100-3/4 #10 1/4 5/16 3/8 7/16 1/2 5/8 3/4 1/4 5/16 3/8 7/16 1/2 5/8 3/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 1/2 1 3/4 2 1 1/2 1 1/2 1 1/2 1 1/2 1 5/8 1 3/4 2 152 Refer to Page iv for description of Rapid Select. Socket Length mm 38 38 38 38 38 38 46 51 38 38 38 38 41 46 51 Socket Diameter In. mm 3/4 3/4 3/4 3/4 3/4 3/4 1 1 7/8 7/8 7/8 7/8 7/8 1 1 19 19 19 19 19 19 25 25 22 22 22 22 22 25 25 Grease Fitting Sockets For Angled Grease Fittings, Deep and Shallow Broach Depth Part Number 6 Point Magnetic Hex Size Square Drive ZN-112 ZN-312 ZN-512 ZN-114 ZN-314 ZN-514 ZE-112 ZE-312 ZE-512 ZE-314 ZE-514 3/8 3/8 3/8 7/16 7/16 7/16 3/8 3/8 3/8 7/16 7/16 1/4 3/8 1/2 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 Part Number 6 Point Magnetic Hex Size Square Drive ZA-110 ZA-310 ZA-510 ZA-112 ZA-312 ZA-512 ZA-314 ZA-514 5/16 5/16 5/16 3/8 3/8 3/8 7/16 7/16 1/4 3/8 1/2 1/4 3/8 1/2 3/8 1/2 MZN-312 MZN-314 MZN-514 - Overall Length In. mm Broach Depth In. mm Magnet Depth In. mm 1 1/4 1 1/2 1 1/2 1 1/4 1 1/2 1 1/2 1 1/4 1 1/2 1 1/2 1 1/2 1 1/2 9/16 9/16 9/16 7/16 7/16 7/16 1/8 1/8 1/8 3/16 3/16 7/32 7/16 7/16 - 32 38 32 32 38 38 32 38 32 38 38 14 14 14 11 11 11 3 3 3 5 5 6 11 11 - For Straight Grease Fittings MZA-110 MZA-310 MZA-510 MZA-314 MZA-514 Refer to Page iv for description of Rapid Select. Overall Length In. mm Broach Depth In. mm 1 1 1/4 1 1/2 1 1 1/4 1 1/2 1 1/4 1 1/2 1/8 1/8 1/8 1/8 1/8 1/8 3/16 3/16 25 32 38 25 32 38 32 38 3 3 3 3 3 3 5 5 Magnet Depth In. mm 21/64 21/64 19/64 23/64 3/8 8 8 7 9 10 153 Drill Holders 1/4” Male Hex Drive Part Number WJ-284-7/64 WJ-284-1/8 WJ-284-9/64 WJ-284-5/32 WJ-284-3/16 WJ-284-1/4 WJ-284-5/16 WJ-284-3/8 WJ-284-13/32 Drill Size In. Overall Length mm In. Body Diameter mm 7/64 1/8 9/64 5/32 3/16 1/4 5/16 3/8 13/32 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 2 5/8 67 67 67 67 67 67 67 67 67 1/2 5/8 5/8 3/4 3/4 3/4 3/4 1 1 13 16 16 19 19 19 19 25 25 Drill Size In. mm In. mm 1/8 9/64 13/64 5/32 3/16 1/4 5/16 7/16 3/8 17/32 1/2 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 60 60 60 60 60 60 60 60 60 60 60 5/8 5/8 3/4 3/4 3/4 3/4 3/4 1 1 1 1/8 1 1/8 16 16 19 19 19 19 19 25 25 29 29 7/16” Male Hex Drive Part Number WJ-265-1/8 WJ-265-9/64 WJ-265-13/64 WJ-265-5/32 WJ-265-3/16 WJ-265-1/4 WJ-265-5/16 WJ-265-7/16 WJ-265-3/8 WJ-265-17/32 WJ-265-1/2 154 Overall Length Refer to Page iv for description of Rapid Select. Body Diameter #5 (1 5/8”) Spline Drive SAE Hex Opening Sockets Part Number SPL-132 SPL-134 SPL-136 SPL-138 SPL-140 SPL-142 SPL-144 SPL-146 SPL-148 SPL-150 SPL-152 SPL-154 SPL-156 SPL-158 SPL-160 SPL-162 SPL-166 SPL-168 SPL-170 SPL-174 SPL-176 SPL-178 SPL-180 SPL-182 SPL-184 SPL-186 SPL-188 Single Hex Opening In. Overall Length In. 1 1 1/16 1 1/8 1 3/16 1 1/4 1 5/16 1 3/8 1 7/16 1 1/2 1 9/16 1 5/8 1 11/16 1 3/4 1 13/16 1 7/8 1 15/16 2 1/16 2 1/8 2 3/16 2 5/16 2 3/8 2 7/16 2 1/2 2 9/16 2 5/8 2 11/16 2 3/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 1/4 3 3/8 3 3/8 3 3/8 3 1/2 3 1/2 3 1/2 3 1/2 3 5/8 3 5/8 3 5/8 3 5/8 4 4 4 4 4 4 4 4 1/4 mm 82 82 82 82 82 82 82 82 86 86 86 89 89 89 89 92 92 92 92 102 102 102 102 102 102 102 108 Diameter Nose End In. mm 1 3/4 1 7/8 2 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 3/8 2 5/8 2 5/8 2 5/8 2 7/8 3 3 3 1/4 3 1/4 3 1/4 3 1/4 3 1/2 3 3/4 3 1/2 3 3/4 3 3/4 4 4 4 1/4 45 48 51 60 60 60 60 60 60 67 67 67 73 76 76 83 83 83 83 89 95 89 95 95 102 102 108 Bolt Clearance In. mm 1 1/2 1 5/8 1 5/8 1 5/8 1 3/4 1 3/4 1 3/4 1 3/4 1 1/2 1 5/8 1 5/8 1 3/4 1 3/4 1 3/4 1 7/8 2 2 2 2 2 1/8 2 1/4 2 1/4 2 1/4 2 1/4 2 1/4 2 3/8 2 3/8 38 41 41 41 45 45 45 45 38 41 41 45 45 45 48 51 51 51 51 54 57 57 57 57 57 60 60 Extensions Part Number In. Overall Length mm EXL-8 EXL-15 8 15 203 381 Female spline to male spline Female spline to male spline Adapters Part Number EXL-750 EXL-1000 EXL-1100 Female spline to 3/4” male square Female spline to 1” male square Female spline to 1 1/2” male square 155 #5 (1 5/8”) Spline Drive Universal Wrenches Part Number MFL-250 MFL-1000 Female spline to male spline (heavy duty) Female spline to 1” male square Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. #5 (1 5/8”) Spline Drive Budd Wheel Sockets Combo. 13/16” Square 1 1/2” Hex Part Number Drive In. Overall Length mm HT-848 #5 Spline 4 1/4 108 Socket Retaining Rings Plastic Retaining Ring With Steel Insert Part Number Drive In. Inside Diameter mm 10005S 10032S 10034S 10008S 10010S 10015S 10016S 10017S 10019S 10020S 10025S 10030S 10035S 3/4” Square 3/4” Square 3/4” Square 1” Square 1” Square 1” Square 1” Square 1” Square 1” Square 1 1/2” Square 1 1/2” Square 1 1/2” Square 1 1/2” Square 1 1/4 1 7/16 1 5/8 1 3/4 2 2 1/8 2 1/4 2 1/2 2 5/8 2 7/8 3 3/8 3 7/8 4 3/8 Drive In. 3/8” Square 3/8” Square 1/2” Square 1/2” Square 3/4” Square 1” Square .677 .771 .885 1.086 1.594 1.948 31.8 36.5 41.3 44.5 50.8 54.0 57.2 63.5 66.7 73.0 85.7 98.4 111.1 Metal Retaining Ring Part Number MET-1301C MET-1302C MET-1401C MET-1402C MET-1600C MET-1800C 156 Refer to Page iv for description of Rapid Select. Inside Diameter mm 17.2 19.6 22.5 27.6 40.5 49.5 Adapters #130-A Yankee Drive for Spiral Type Driver Part Number Male Square In. In. Overall Length mm In. Shank Diameter mm YK-250 YK-370 YK-500 1/4 3/8 1/2 1 15/16 2 3/16 2 5/16 49 56 59 .277 .277 .277 7.0 7.0 7.0 #131-A Yankee Drive for Spiral Type Driver Part Number Male Square In. In. Overall Length mm In. Shank Diameter mm YK-251 YK-371 YK-501 1/4 3/8 1/2 1 15/16 2 3/16 2 5/16 49 56 59 .310 .310 .310 8.0 8.0 8.0 #135-A Yankee Drive for Spiral Type Driver Part Number Male Square In. In. Overall Length mm In. Shank Diameter mm YK-252 YK-372 YK-502 1/4 3/8 1/2 1 15/16 2 3/16 2 5/16 49 56 59 .215 .215 .215 5.5 5.5 5.5 Female Threaded Adapters Part Number Female Thread Male Square In. Type of Lock TH-257 TH-377 TH-501 TH-378 TH-502 3/8”-24 3/8”-24 3/8”-24 1/2”-20 1/2”-20 1/4 3/8 1/2 3/8 1/2 Pin Pin Pin Pin Pin Part Number Male Thread Hex Drive TM-24 TN-24 TM-20 TN-20 3/8”-24 3/8”-24 1/2”-20 1/2”-20 1/4 7/16 1/4 7/16 Male Threaded Adapters Refer to Page iv for description of Rapid Select. 157 Adapters Socket and Ratchet Wrench Adapters, SAE Part Number Male Square In. Male Hex In. Overall Length In. A-108 A-110 A-112 A-114 A-116 A-118 A-120 A-312 A-314 A-316 A-318 A-320 A-322 A-324 A-326 A-328 A-512 A-514 A-516 A-518 A-520 A-522 A-524 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 3/8 7/16 1/2 9/16 5/8 11/16 3/4 25/32 25/32 25/32 25/32 25/32 25/32 25/32 1 1/64 1 1/64 1 5/64 1 5/64 1 5/64 1 5/64 1 5/64 1 5/64 1 5/64 1 3/32 1 3/32 1 3/32 1 3/32 1 1/8 1 1/8 1 1/8 (Continued on next page.) 158 Refer to Page iv for description of Rapid Select. Adapters Socket and Ratchet Wrench Adapters, SAE (continued) Part Number Male Square In. Male Hex In. Overall Length In. A-526 A-528 A-530 A-532 A-534 A-536 A-538 A-540 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 13/16 7/8 15/16 1 1 1/16 1 1/8 1 3/16 1 1/4 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 Socket and Ratchet Wrench Adapters, Metric Part Number A-1-6mm A-1-7mm A-1-8mm A-1-9mm A-1-10mm A-1-11mm A-1-12mm A-1-13mm A-3-10mm A-3-11mm A-3-12mm A-3-13mm A-3-14mm A-3-15mm A-3-16mm A-3-17mm A-3-18mm A-3-19mm A-5-10mm A-5-11mm A-5-12mm A-5-13mm A-5-14mm A-5-15mm A-5-16mm A-5-17mm A-5-18mm A-5-19mm A-5-20mm A-5-21mm A-5-22mm A-5-23mm A-5-24mm A-5-25mm Male Square In. Male Hex mm 1/4 1/4 1/4 1/4 1/4 1/4 1/4 1/4 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 6 7 8 9 10 11 12 13 10 11 12 13 14 15 16 17 18 19 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Refer to Page iv for description of Rapid Select. Overall Length In. mm 25/32 25/32 25/32 25/32 25/32 25/32 25/32 25/32 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 15/16 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 1 1/8 20 20 20 20 20 20 20 20 24 24 24 24 24 24 24 24 24 24 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 29 159 Adapters Sockets with Male Hex Part Number Female Hex In. Male Hex In. In. Overall Length mm SJ-375 SJ-378 SJ-379 SJ-380 SJ-349 SJ-350 SJ-351 SJ-352 SJ-360 SJ-361 SJ-241 SJ-362 SJ-363 SJ-364 SJ-365 SJ-55 SJ-66 SJ-67 SJ-68 5/16 7/16 1/2 9/16 3/8 7/16 1/2 9/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 7/16 1/2 9/16 5/8 3/8 3/8 3/8 3/8 7/16 7/16 7/16 7/16 1/2 1/2 1/2 1/2 1/2 1/2 1/2 9/16 9/16 9/16 9/16 13/16 15/16 1 1 15/16 15/16 1 1 15/16 15/16 1 1 1 1/8 1 3/16 1 3/16 15/16 1 1 1 1/8 21 24 25 25 24 24 25 25 24 24 25 25 28 30 30 24 25 25 28 Hex Drive Universal Adapters Male Hex to Male Square – Extension Part Number Standard (Tension Type Shown) Tension KCM-25-3 KSM-25-3 KCM-25-B-6 KSM-25-B-6 KCM-37-6 KSM-37-6 KCM-37-B-6 KSM-37-B-6 KEM-37-B-6 KBM-37-6 KTM-37-6 Male Sq. In. Male Hex In. Type of Lock 1/4 1/4 3/8 3/8 3/8 3/8 1/4 1/4 1/4 1/4 5/16 7/16 Pin Ball Pin Ball Ball Pin Overall Length In. mm 3 6 6 6 6 6 Universal wrenches must not be used with impact drivers. Maximum operating angle is 30°. Standard lengths are 3”, 6”, 9” and 12” (76, 152, 229 and 305mm). 160 76 152 152 152 152 152 Largest Diameter In. mm 5/8 5/8 3/4 3/4 7/8 3/4 15.9 15.9 19.1 19.1 22.2 19.1 Part Number Index Part No. 400-BH 401 402• 403 440 450 451 452 453 454 460 470 480 482 483• 484 488 490• 491• 492• 493• 494 498 501 502• 503 551 552• 553 591 592• 610 630 638 820 821 822 825• 830• 832• 833• 834 835• 838• 850 852 853 854• 855• 858• 1105 1106 1107 1108• 1109• 1110• 1111• 1112• 1113 1114• 1115 1116• 1118• 1119 1120 1206 1207 Page No. 54 6 6 6 54 54 6 6 6 6 58 58 54 5 5 5 54 52 4 4 4 4 53 6 6 6 6 6 6 7 7 53 53 53 55 7 7 55 55 7 7 7 55 13 55 7 7 7 55 13 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 77 Part No. 1208• 1209 1210• 1211 1212• 1213 1214• 1215 1216 1217 1218 1220 1308 1310• 1311 1312 1313 1314 1316 1318 1320 1608 1609 1610 1611 1612 1614 2122 2123 2124 2125 3010 3012 3014• 3016• 3018• 3020 3022 3024• 3026 3028 3108• 3109 3110• 3111 3112• 3113 3114• 3115 3116• 3117 3118• 3119 3120• 3121 3122 3124• 3126 3208 3209 3210• 3211 3212• 3214• 3216• 3218• 3220• •Denotes a Rapid Select item. Page No. 77 77 77 77 77 77 77 77 77 77 77 8 78 78 78 78 78 78 78 78 78 80 80 80 80 80 80 42 42 42 42 94 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 86 87 87 87 87 87 87 87 87 87 Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No. 3222 3224 3226 3228 3308 3310 3311 3312• 3314• 3316• 3318• 3320• 3322 3324• 3326 3328 3408 3409 3410• 3411 3412• 3414• 3416• 3418• 3420 3422 3424 3426 3428 3430 3432 3434 3510• 3511 3512• 3513 3514• 3516• 3518• 3522 3524 3530 3532 3534 3607 3608 3609 3610• 3612• 3614 3618 3620 3622 3624 4910• 4930 5108 5109 5110• 5111 5112• 5113 5114• 5115 5116• 5117 5118• 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 87 88 88 88 88 88 88 88 88 88 88 88 88 92 92 92 92 92 92 92 92 92 92 4 4 105 105 105 105 105 105 105 105 105 105 105 5119 5120• 5121 5122• 5124• 5125 5126• 5128• 5129 5130• 5131 5132• 5134• 5136• 5138 5140• 5142• 5144 5146 5148• 5150 5152• 5154 5156 5210 5212 5214 5216• 5218• 5220• 5222 5224• 5226 5228 5230• 5232 5234 5236• 5238 5240 5242 5244 5246 5248 5310 5312 5314• 5316• 5318• 5320• 5322• 5324• 5326• 5328• 5330• 5332• 5334• 5336• 5338 5340• 5342• 5344 5346 5348• 5410 5412 5414 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 106 106 106 5416• 5418• 5420• 5421 5422 5424• 5426• 5428• 5430• 5432 5434 5436• 5438 5440• 5442 5510 5512• 5514• 5516• 5518• 5520• 5522• 5524• 5526• 5528• 5530• 5532• 5534• 5608 5609 5610 5612• 5614 5616• 5618 5620 5622 5624 5626 5628 5632 5634 5636 5712 5714 5716 5718 5720 5724 5728 5732 5812 5818 5820 5822 5832 5836 5910 5912 5914 5916 5918 5920 6116 6118 6120 6122 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 108 108 108 108 108 108 108 108 108 108 108 108 108 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 128 128 128 128 6124 6126 6128 6130 6132 6134 6136 6138 6140 6142 6144 6146 6148• 6320 6322 6324• 6326 6328 6330 6332 6334 6336 6338 6340 6342 6344 6346 6348 6352 6414 6418 6420 6424 6426 6428 6430 6432 6436 6440 6444 6520 6522 6524 6526 6528 6530 7116 7118 7120 7122 7124 7126 7128 7130 7132 7134 7136 7138 7140 7142 7144 7146 7148• 7150 7152 7154 7156 128 128 128 128 128 128 128 128 128 128 128 128 128 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 129 128 128 128 128 128 128 128 128 128 128 128 129 129 129 129 129 129 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 Part No. 7158 7160 7162 7164 7166 7168 7170 7172 7174 7176 7180 7320 7322 7324SKT 7326 7328 7330• 7332 7334 7336 7338 7340 7342 7344 7346 7348• 7350 7352 7354 7356 7358 7360 7362 7364 7372 7376 7424• 7426 7428 7430• 7432 7434 7436• 7438 7440 7442 7444 7446 7448 7450 7452 7454 7456 7458 7460 7464 7466 7470 7472 7524• 7526 7528• 7530• 7532 7534 7536• 7538 Page No. Part No. Page No. Part No. Page No. 133 133 133 133 133 133 133 133 133 133 133 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 135 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 134 135 135 135 135 135 135 135 135 7540 7542 7544 7546 7548 7552 7556 7564 7620 7622 7624 7626 7628 7630 7632 7636• 8124 8126 8128 8130 8132 8134 8136 8138 8140 8142 8144 8146 8148 8152 8154 8158 8160 8162 8164 8166 8168 8170 8172 8174 8176 8178 8180 8182 8184 8186 8188 8190 8226 8228 8230 8232 8236 8240 8242 8244 8246 8248 8324 8326 8328 8330 8332 8334 8336 8338 8340 135 135 135 135 135 135 135 135 136 136 136 136 136 136 136 136 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 140 141 141 141 141 141 141 141 141 141 141 142 142 142 142 142 142 142 142 142 8342• 8344 8346 8348 8350 8352 8354 8356 8358 8360 8362 8364 8366 8368 8370 8372 8374 8376 8380 8382 8384 8386 8388 8390 8430 8432 8434 8436 8438 8440 8442 8444 8446 8448 8452 8456 8458 8460 8464 8468 8472 8480 8528 8530 8534 8536 8540 8542 8548 8620 8624 8626 8628 8630 8632 8634 8636 8638 8640 8642 8644 8646 8648 8650 8652 8654 8656 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 142 141 141 141 141 141 141 141 141 141 141 141 141 141 141 141 141 141 141 142 142 142 142 142 142 142 143 143 143 143 143 143 143 143 143 143 143 143 143 143 143 143 143 143 Refer to Page iv for description of Rapid Select. 161 Part No. 8658 8660 8662 9140 9142 9144 9146 9148 9150 9152 9154 9156 9158 9162 9164 9166 9168 9170 9172 9174 9176 9178 9180 9182 9184 9186 9190 9192 9194 9196 9198 91100 91102 91104 91106 91108 91110 91112 91116 91120 91124 91128 91132 91136 91140 91144 91152 10005S 10008S 10010S 10015S 10016S 10017S 10019S 10020S 10025S 10030S 10032S 10034S 10035S 103-0 103-00 103-000 103-1 103-2 103-3 103-4 103-5 103-6 10MM03• 10MM03-D• Page No. 143 143 143 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 147 156 156 156 156 156 156 156 156 156 156 156 156 156 14 14 14 14 14 14 14 14 14 95 95 Part No. 10MM11• 10MM11-D 10MM13• 10MM13-D• 10MM15• 10MM15-D 10MM21• 10MM21-D 10MM23• 10MM23-D 10MM25 10MM25-D 10MM33• 10MM35 10MM35-D 10MM43• 10MM43-D 10MM45 10MM45-D 10MM55 10MM55-D 10MME1• 10MME3 1106-D 1107-D 1108-D• 1109-D 1110-D• 1111-D 1112-D 1113-D 1114-D 1116-D 1117-D 1118-D 1119-D 1120-D 11MM03 11MM03-D 11MM11• 11MM11-D 11MM13• 11MM13-D 11MM15 11MM15-D 11MM21 11MM21-D 11MM23• 11MM23-D 11MM25 11MM25-D 11MM35 11MM35-D 11MM43 11MM43-D 11MM45 11MM45-D 11MM55 11MME1 11MME3 1206-D 1207-D 1208-D 1209-D 1210-D 1211-D 1212-D 1214-D 1216-D 1218-D 12MM03• •Denotes a Rapid Select item. 162 Page No. 81 81 95 95 116 116 78 78 96 96 117 117 96 117 117 96 96 116 116 118 118 83 99 77 77 77 77 77 77 77 77 77 77 77 77 77 77 95 95 81 81 95 95 116 116 81 81 96 96 117 117 117 117 96 96 116 116 118 83 99 77 77 77 77 77 77 77 77 77 77 95 Part No. 12MM03-D 12MM11• 12MM11-D 12MM13• 12MM13-D 12MM15• 12MM15-D• 12MM21 12MM21-D 12MM23• 12MM23-D 12MM25 12MM25-D 12MM35 12MM35-D 12MM43 12MM43-D 12MM45 12MM45-D 12MM55 12MM55-D 12MME1 12MME3 130-3 130-4 130-5 130-6 130-7 130-8 1308-D 1310-D 1312-D 1313-D 1314-D 1316-D 1320-D 13MM03• 13MM03-D 13MM11• 13MM11-D 13MM13• 13MM13-D 13MM15• 13MM15-D 13MM21• 13MM21-D 13MM23• 13MM23-D 13MM25• 13MM25-D• 13MM33• 13MM35• 13MM35-D 13MM43• 13MM43-D 13MM45• 13MM45-D 13MM55• 13MM55-D• 13MME1 13MME5 13-TX-06 13-TX-07 13-TX-08• 13-TX-09 13-TX-10• 13-TX-15• 13-TX-20 13-TX-25 13-TX-27 13-TX-30 Page No. 95 81 81 95 95 116 116 81 81 96 96 117 117 117 117 96 96 116 116 118 118 83 99 15 15 15 15 15 15 78 78 78 78 78 78 78 95 95 81 81 95 95 116 116 81 81 96 96 117 117 96 117 117 96 96 116 116 118 118 83 121 58 58 58 58 58 58 58 58 58 58 Part No. 13-TX-40 14MM03 14MM03-D 14MM11 14MM11-D 14MM13• 14MM13-D 14MM15• 14MM15-D• 14MM21 14MM23• 14MM23-D 14MM25• 14MM35 14MM35-D 14MM43 14MM43-D 14MM45• 14MM45-D 14MM55 14MM55-D 1500-P• 1505-P 1510-P 1550-P 1555-P 15MM03• 15MM03-D 15MM11 15MM11-D 15MM13• 15MM13-D 15MM15• 15MM15-D 15MM16 15MM21 15MM21-D 15MM23• 15MM23-D 15MM25• 15MM25-D 15MM33• 15MM33-D 15MM35• 15MM35-D 15MM36 15MM43 15MM43-D 15MM45• 15MM45-D 15MM55• 15MM55-D 1608-D 1609-D 1610-D 1612-D 1614-D 16MM03 16MM03-D 16MM11 16MM13• 16MM13-D 16MM15• 16MM15-D 16MM16 16MM21 16MM23 16MM23-D 16MM25• 16MM25-D 16MM35 Page No. 58 95 95 81 81 95 95 116 116 95 96 96 117 117 117 96 96 116 116 116 116 57 57 57 57 57 95 95 81 81 95 95 116 116 131 81 81 95 96 117 117 96 96 117 117 131 96 96 116 116 118 118 80 80 80 80 80 95 95 81 95 95 116 116 131 81 96 96 117 117 117 Part No. Page No. 16MM35-D 16MM43 16MM43-D 16MM45 16MM45-D 16MM55• 16MM55-D 170-0 170-1 170-1/2 170-1/4• 170-1/4A 170-1/4-ACR 170-1/4B• 170-10• 170-10A 170-10-ACR• 170-2 170-3 170-3/8 170-3/8A 170-3/8B 170-3/8C 170-4• 170-5• 170-5/16 170-5/16A 170-5/16-ACR 170-5/16B• 170-5/8 170-5/8D 170-6• 170-6-ACR 170-7/16 170-7/16C 170-8• 170-8A 170-8-ACR 170-9/16 17MM03 17MM03-D 17MM13• 17MM13-D 17MM15• 17MM15-D 17MM16 17MM17 17MM23• 17MM23-D 17MM25• 17MM25-D 17MM35• 17MM35-D 17MM36 17MM43 17MM43-D 17MM45• 17MM45-D 17MM55• 17MM55-D 185-0 185-00 185-000• 185-1• 185-1.5MM 185-10• 185-10MM 185-2• 185-2.5MM 185-2MM 185-3• Refer to Page iv for description of Rapid Select. 117 96 96 116 116 118 116 44 44 45 45 45 45 44 44 45 44 44 44 45 45 44 45 44 44 45 45 45 44 45 45 44 44 45 45 44 45 44 45 95 95 95 95 116 116 131 137 96 96 117 117 117 117 131 96 96 116 116 118 118 33 33 33 33 33 33 33 33 33 33 33 Part No. 185-3MM• 185-4• 185-4-4 185-4MM• 185-5 185-5MM• 185-6 185-6MM 185-7 185-7MM 185-8 185-8MM 185-9• 185-9MM 18MM03 18MM03-D 18MM13• 18MM13-D 18MM15• 18MM15-D 18MM16 18MM17• 18MM23• 18MM23-D 18MM25• 18MM25-D• 18MM35• 18MM35-D 18MM36 18MM43 18MM43-D 18MM45• 18MM45-D 18MM55• 18MM55-D 190-1 190-3 190-4 190-5 190-7 1950-0 1950-1 1950-2• 1950-3 1951-0 1951-1 1951-2• 1951-3 1953-0 1953-1 1953-2• 1953-3• 19MM03 19MM03-D 19MM13 19MM13-D 19MM15• 19MM15-D 19MM16 19MM17 19MM23 19MM23-D 19MM25• 19MM25-D 19MM35• 19MM35-D 19MM36 19MM43 19MM43-D 19MM45 19MM45-D Page No. 33 33 33 33 33 33 33 33 33 33 33 33 33 33 95 95 95 95 116 116 131 137 96 96 117 117 117 117 131 96 96 116 116 118 118 42 42 42 42 42 41 41 41 41 41 41 41 41 41 41 41 41 95 95 95 95 116 116 131 137 96 96 117 117 117 117 131 96 96 116 116 Part No. Page No. 19MM55 118 19MM55-D 118 1E06 79 1E07 79 1E08 79 1E09 79 1E10 79 1E11 79 1E12 79 1E14 79 1E15 79 1P06 80 1P07 80 1P08 80 1P09 80 1P10 80 1P11 80 1P12 80 1P14 80 1P16 80 20MM03 95 20MM13 95 20MM15 116 20MM15-D 116 20MM16 131 20MM17 136 20MM23 96 20MM23-D 96 20MM25 117 20MM25-D 117 20MM35 117 20MM35-D 117 20MM45 116 20MM55 118 212-0 43 212-1 43 212-1/4• 43 212-1/4A• 43 212-1/4A-ACR 43 212-1/4-ACR 43 212-10• 43 212-10A 43 212-10-ACR• 43 212-2• 43 212-3• 43 212-3/8A 43 2123-A 42 2123-B 42 212-4• 43 212-5• 43 212-5/16A• 43 212-5/16A-ACR 43 212-6• 43 212-6-ACR 43 212-8• 43 212-8A 43 212-8-ACR• 43 21MM03 95 21MM13 95 21MM15• 116 21MM15-D 116 21MM16 131 21MM17• 137 21MM18 144 21MM23 96 21MM25• 117 21MM25-D 117 21MM35• 117 21MM35-D 117 21MM36 131 21MM37 137 Part No. Page No. 21MM38 144 21MM45 116 21MM45-D 116 21MM55 118 21MM57 137 21-S-156-0375 55 21-S-156-0750• 55 21-S-156-0937 55 21-S-187-1125 55 21-S-187-1375 55 21-S-187-1500 55 21-S-187-1625 55 22MM03 95 22MM13 95 22MM15• 116 22MM15-D 116 22MM16 131 22MM17 137 22MM18 144 22MM23 96 22MM25• 117 22MM25-D 117 22MM35 117 22MM35-D 117 22MM36 131 22MM37 137 22MM45 116 22MM45-D 116 22MM47 137 22MM55 118 22MM55-D 118 22MM57 137 23MM15 116 23MM15-D 116 23MM16 131 23MM17 137 23MM18 144 23MM25 117 23MM25-D 117 23MM35 117 23MM37 137 23MM38 144 23MM55 118 24BITKIT 57 24MM15• 116 24MM15-D 116 24MM16 131 24MM17• 137 24MM18 144 24MM25• 117 24MM25-D 117 24MM35• 117 24MM35-D 117 24MM36 131 24MM37• 137 24MM38 144 24MM47• 137 24MM55 118 24MM55-D 118 24MM57• 137 25MM15 116 25MM15-D 116 25MM17 137 25MM18 144 25MM35 117 25MM37 137 260-1 15 260-2 15 260-3 15 260-4 15 260-5 15 Part No. 260-7 260-8 260-9 265-0 265-1 265-1/4 265-10 265-2 265-3 265-3/8 265-4 265-5 265-5/16 265-6 265-7/16 265-8 265A-0 265A-1 265A-1/4 265A-10 265A-2 265A-3 265A-3/8 265A-4 265A-5 265A-5/16 265A-6 265A-7/16 265A-8 268P-0 268P-1 268P-2 268P-3 268P-4 268P-5 268P-6 268P-8 268P-10 268P-1/4 26MM15 26MM15-D 26MM17 26MM18 26MM25 26MM37 26MM55 273-0 273-1 273-10• 273-2 273-3 273-4 273-5 273-6 273-8• 273A-0 273A-1 273A-10 273A-2 273A-3 273A-4 273A-6 273A-8 273B-0 273B-1 273B-10 273B-2 273B-3 273B-4 273B-5 273B-6 Page No. 15 15 15 44 44 45 44 44 44 45 44 44 45 44 45 44 44 44 45 44 44 44 45 44 44 45 44 45 44 59 59 59 59 59 59 59 59 59 59 116 116 137 144 117 137 118 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 44 Part No. 273B-8• 27MM15• 27MM15-D 27MM17 27MM18 27MM25 27MM37 27MM38 27MM47 27MM55 27MM55-D 27MM57 28MM15 28MM15-D 28MM17 28MM18 28MM25 28MM37 28MM38 29MM15 29MM15-D 29MM17 29MM18 29MM25 29MM25-D 29MM37 29MM38 29MM55 3.5MM11 3.5MME1 3012-D 3014-D• 3016-D 3018-D 3020-D 3022-D 3024-D 3026-D 309-0 309-00 309-000 309-1 309-2 309-3 309-4 309-5 309-6 309-7 309-8 30MM15• 30MM15-D 30MM17• 30MM18 30MM25 30MM25-D 30MM37 30MM47 30MM48 30MM55 30MM57 3108-D 3109-D 3110-D• 3111-D 3112-D 3114-D• 3116-D 3117-D 3118-D 3120-D 3121-D Page No. 44 116 116 137 144 117 137 144 137 118 118 138 116 116 137 144 117 138 144 115 115 137 144 117 117 138 144 118 81 83 85 85 86 86 86 86 86 86 15 15 15 15 15 15 15 15 15 15 15 116 116 137 144 117 117 138 137 144 118 138 86 86 86 86 86 86 86 86 86 86 86 Part No. 3122-D 3124-D 315-10MM 315-12MM 315-14MM 315-2.5MM 315-3 315-3MM 315-4 315-4MM 315-5 315-5MM 315-6 315-6MM 315-7 315-7MM 315-8 315-8MM 315-9MM 320-0 320-00 320-000 320-1• 320-2• 320-20 320-20 320-3• 320-4• 320-5• 320-5 320-6 3209-D 320-L• 320-M• 320-P• 320-R• 320-S 320-T• 3210-D 3211-D 3212-D 3214-D 3216-D 3218-D 3220-D 3222-D 3224-D 3226-D 3228-D 322-L 322-M 322-OL 322-OOL 322-OOOL 322-P 322-R 323-0 323-00 323-000 323-1 323-2 323-3 323-4 323-5 323-6 324-0 324-00 324-000 324-1 324-2 324-20 •Denotes a Rapid Select item. Page No. 86 86 34 34 34 34 33 34 33 34 33 34 33 34 33 34 33 34 34 12 12 12 12 13 13 13 13 13 13 13 13 87 17 17 17 17 17 17 87 87 87 87 87 87 87 87 87 87 87 17 17 17 17 17 17 17 12 12 12 12 13 13 13 13 13 12 12 12 13 13 13 Part No. 324-3 324-4 324-5 324-6 325-0 325-0 325-00 325-000 325-1 325-2 325-20 325-3 325-4 325-5 325-6 326-0 326-00 326-000 326-1 326-2 326-20 326-3 326-4 326-5 326-6 327-0 327-0 327-00 327-000 327-1 327-2 327-20 327-3 327-4 327-5 327-6 328-0 328-0 328-00 328-000 328-1 328-2 328-2 328-20 328-3 328-4 328-5 328-6 328-L 328-M 328-P 328-R 328-S 328-T 32MM15• 32MM15-D 32MM17 32MM18 32MM25-D 32MM37 32MM38 32MM47 32MM55 3308-D 3310-D 3312-D• 3314-D 3316-D 3318-D 3320-D 3322-D Page No. 13 13 13 13 12 12 12 12 13 13 13 13 13 13 13 12 12 12 12 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12 13 13 12 12 12 12 13 13 13 13 13 13 13 13 17 17 17 17 17 17 116 116 137 144 117 138 144 137 118 87 87 87 87 87 87 87 87 Part No. 3324-D 3326-D 3328-D 33MM15 33MM17 33MM18 33MM37 33MM38 3408-D 3410-D 3412-D• 3414-D 3416-D 3418-D 3420-D 3422-D 3424-D 3426-D 3428-D 3430-D 3432-D 3434-D 34MM15 34MM17 34MM18 34MM37 3512-D 3514-D• 3516-D 3518-D 3522-D 3524-D 3530-D 3532-D 35MM15 35MM17 35MM18 35MM37 35MM38 3608-D 3609-D 3610-D 3612-D 3614-D 3616-D 3618-D 36MM15 36MM17• 36MM18 36MM37 36MM38 37MM17 37MM18 37MM38 38MM17 38MM18 38MM38 3E06 3E07 3E08 3E10 3E11 3E12 3E14 3E16 3E18 3P06 3P07 3P08 3P09 3P10 Page No. 87 87 87 196 137 144 138 144 87 87 87 87 87 87 87 87 87 87 87 87 87 87 116 137 144 138 88 88 8 88 88 88 88 88 116 137 144 138 144 92 92 92 92 92 92 92 116 137 144 138 144 137 144 144 137 144 144 92 92 92 92 92 92 92 92 92 92 92 92 92 92 Part No. Page No. 3P11 92 3P12 92 3P14 92 3P16 92 3P18 92 4.5MM11 81 4.5MME1 83 401-PZD 27 402-PZD 27 403-PZD 27 41MM17 137 41MM18 144 41MM37 138 41MM38 144 42MM18 144 440-1• 1 440-10IP 25 440-115 1 440-12 1 440-125 1 440-125-PZD 26 440-13 1 440-15IP 25 440-1-ACR1 2 440-1-ACR1-D 2 440-1-ACR1-R 2 440-1-PZD 26 440-1-SF 29 440-2• 1 440-20IP 25 440-215• 1 440-215-PZD 26 440-215-SF 29 440-22 1 440-225• 1 440-225-PZD 26 440-225-SF 29 440-22-ACR2 2 440-22-ACR2-D 2 440-22-ACR2-R 2 440-22-PZD 26 440-22-SF 29 440-23 1 440-24 1 440-255 1 440-25IP 25 440-26 1 440-27 1 440-27IP 25 440-2-ACR2• 2 440-2-ACR2-D 2 440-2-ACR2-R• 2 440-2-PZD• 26 440-2-SF 29 440-3• 1 440-30IP 25 440-3125 1 440-32 1 440-325 1 440-33 1 440-34 1 440-3-ACR3 2 440-3-ACR3-D 2 440-3-ACR3-R• 2 440-3BN• 1 440-3-PZD 26 440-3-SF 29 440-4• 1 440-40IP 25 440-4-PZD 26 440-4-SF 29 Part No. Page No. 440-F 440-TSQ-10M 440-TSQ-4M 440-TSQ-5M 440-TSQ-6M 440-TSQ-8M 440-TX-05 440-TX-06 440-TX-07 440-TX-07-H 440-TX-08 440-TX-08-H 440-TX-09 440-TX-09-H 440-TX-10 440-TX-10-H 440-TX-10-W 440-TX-15 440-TX-15-125 440-TX-15-H 440-TX-15-W 440-TX-20 440-TX-20 440-TX-20-2 440-TX-20-H 440-TX-20-W 440-TX-25 440-TX-25-H 440-TX-25-W 440-TX-27 440-TX-27-H 440-TX-27-W 440-TX-30 440-TX-30-H 440-TX-30-W 440-TX-40 440-TX-40-H 440-TX-40-W 440-TX-45 440-TX-50 445-0 445-00 445-000 445-00-15 445-0-15 445-1 445-10 445-10-15 445-1-15 445-2 445-20 445-20-15 445-2-15 445-3 445-30 445-30-15 445-3-15 445-4 445-4-15 445-5 445-6 446-1 446-12 446-1-PZD 446-1-SF 446-2 446-215 446-215T 446-22 446-225T 446-22-PZD 30 49 49 49 49 49 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 2 1 26 29 2 2 2 2 1 26 Part No. Page No. 446-22T• 446-23T 446-27 446-2-ACR2-D 446-2-PZD• 446-2-SF 446-F 46MM17 46MM18 46MM38 47MM18 47MM38 480-1 480-1-PZD 480-2• 480-22 480-225 480-24 480-27 480-2-ACR2• 480-2-ACR2-D 480-2-ACR2-R 480-2-PZD 480-2-SF 480-3• 480-325 480-3-ACR3 480-3-ACR3-D 480-3-ACR3-R 480-3-PZD 480-3-PZD 480-3-SF 480-4• 480-4-ACR4 480-4-ACR4-R 480-4BN• 480-4BN-PZD 480-4BN-SF 480-4-PZD 480-4-SF 480-F 480-TSQ-10M 480-TSQ-12M 480-TSQ-14M 480-TSQ-4M 480-TSQ-5M 480-TSQ-6M 480-TSQ-8M 480-TX-20 480-TX-25 480-TX-27 480-TX-30• 480-TX-40• 480-TX-40-4 480-TX-40-H 480-TX-45• 480-TX-45-6 480-TX-45-H 480-TX-50• 480-TX-50-H 480-TX-55• 480-TX-55-H 485-1 485-2 485-3 485-4 485-5 485-6 485-7• 48MM18 48-TSQ-10M 2 1 2 2 26 29 30 137 144 144 144 144 1 26 3 3 3 3 3 3 3 3 26 29 3 3 3 3 3 26 26 29 3 3 3 3 26 29 26 29 30 49 49 49 49 49 49 49 20 20 20 20 20 20 20 20 20 20 20 20 20 20 12 12 12 12 12 12 12 144 49 Part No. Page No. 48-TSQ-12M 48-TSQ-14M 48-TSQ-4M 48-TSQ-5M 48-TSQ-6M 48-TSQ-8M 48-TX-40 48-TX-45 48-TX-50• 48-TX-55 490-10 490-3 490-4• 490-5 490-6 490-8 4910-A 4910-B• 4910-C 49-10IP 49-15IP 491-A• 491-ACR1 491-ACR1-D 491-ACR1-R 491-AF 491-A-PZD 491-A-SF 491-B• 491-BF 491-B-PZD 491-B-SF 491-C• 491-CC• 491-CF 491-C-SF 491-F 491-PZD 491-SF 49-20IP 492-200MM 492-27 49-25IP 49-27IP 492-A• 492-A-27 492-A-ACR2• 492-A-ACR2-D 492-A-ACR2-R 492-ACR2• 492-ACR2-D 492-ACR2-R 492-AF 492-A-PZD• 492-A-SF 492-B• 492-B-27 492-B-ACR2• 492-B-ACR2-D 492-B-ACR2-R 492-BF 492-B-PZD• 492-B-SF 492-C• 492-C-27 492-C-ACR2-D 492-CC• 492-CF 492-C-SF 492-F 492-PZD• 49 49 49 49 49 49 22 22 22 22 50 50 50 50 50 50 4 4 4 25 25 4 5 5 5 30 27 29 4 30 27 29 4 4 30 29 30 27 29 25 4 4 25 25 4 4 5 5 5 5 5 5 30 27 29 4 4 5 5 5 30 27 29 4 4 5 4 30 29 30 27 Part No. Page No. 492-SF 4930-A 4930-B 4930-C 4930-CC 49-30IP 493-A• 493-ACR3• 493-ACR3-D 493-ACR3-R 493-AF 493-A-PZD 493-A-SF 493-B• 493-BF 493-B-SF 493-C• 493-CF 493-C-SF 493-F 493-PZD 493-SF 49-40IP 49-A-10IP 49-A-15IP 49-A-20IP 49-A-25IP 49-A-27IP 49-A-30IP 49-A-40IP 49-A-TX-05 49-A-TX-06 49-A-TX-07 49-A-TX-08• 49-A-TX-09 49-A-TX-10• 49-A-TX-10-H 49-A-TX-15• 49-A-TX-15-H 49-A-TX-15-W 49-A-TX-20• 49-A-TX-20-H 49-A-TX-25• 49-A-TX-27 49-A-TX-30• 49-A-TX-40 49-B-10IP 49-B-15IP 49-B-20IP 49-B-25IP 49-B-27IP 49-B-30IP 49-B-40IP 49-B-TX-05 49-B-TX-07 49-B-TX-08• 49-B-TX-09 49-B-TX-10• 49-B-TX-15• 49-B-TX-15-H 49-B-TX-15-W 49-B-TX-20• 49-B-TX-20-H 49-B-TX-20-W 49-B-TX-25• 49-B-TX-27 49-B-TX-30• 49-B-TX-30-W 49-B-TX-40 49-C-TX-07 49-C-TX-08• 29 4 4 4 4 25 4 5 5 5 30 27 29 4 30 29 4 30 29 30 27 29 25 25 25 25 25 25 25 25 21 21 21 21 21 21 22 21 22 22 21 22 21 21 21 21 25 25 25 25 25 25 25 21 21 21 21 21 21 22 22 21 22 22 21 21 21 22 21 21 21 Refer to Page iv for description of Rapid Select. 163 Part No. 49-C-TX-09 49-C-TX-10• 49-C-TX-15• 49-C-TX-20• 49-C-TX-20-H 49-C-TX-25• 49-C-TX-27 49-C-TX-30• 49-C-TX-40 49-TSQ-10M 49-TSQ-12M 49-TSQ-4M 49-TSQ-5M 49-TSQ-6M 49-TSQ-8M 49-TX-05 49-TX-06• 49-TX-07• 49-TX-08• 49-TX-08-W 49-TX-09 49-TX-09-W 49-TX-10• 49-TX-10-H 49-TX-10-W 49-TX-15• 49-TX-15-H 49-TX-15-W 49-TX-20• 49-TX-20-5 49-TX-20-W 49-TX-25 49-TX-25-W• 49-TX-27 49-TX-27-W 49-TX-30• 49-TX-30-W 49-TX-40• 4MM11 4MME1 5.5MM11• 5.5MM21 5.5MME1 501-A 502-A 502-ACR2 502-PZD 50MM18 50MM38 50-TX-08• 50-TX-10 50-TX-15 50-TX-20 5108-D 510-BH 5110-D 5112-D 5113-D 5114-D 5116-D• 5118-D 5119-D 5120-D 5122-D 5124-D• 5125-D 5126-D 5128-D 5129-D 5130-D 5131-D Page No. 21 21 21 21 22 21 21 21 21 49 49 49 49 49 49 21 21 21 21 22 21 22 21 22 22 21 22 22 21 21 22 21 22 21 22 21 22 21 81 83 81 81 83 6 6 6 27 144 144 23 23 23 23 105 55 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 Part No. 5132-D 5134-D 5136-D 5138-D 5140-D 5142-D 5144-D 5146-D 5148-D 5150-D 5152-D 5154-D 5156-D 5212-D 5214-D 5216-D 5218-D 5220-D 5222-D 5224-D• 5228-D 5230-D 5232-D 5234-D 5236-D 5238-D 5240-D 5312-D 5314-D 5316-D• 5318-D 5320-D 5322-D 5324-D• 5326-D 5328-D 5330-D 5332-D 5334-D 5336-D 5338-D 5340-D 5412-D 5414-D 5416-D• 5418-D• 5420-D 5421-D 5422-D 5424-D 5425-D 5426-D 5428-D 5430-D 5432-D 5434-D 5436-D 5438-D 5440-D 5442-D 5512-D 5514-D 5516-D 5518-D• 5520-D• 5522-D 5524-D• 5526-D 5528-D 552-F 5530-D• •Denotes a Rapid Select item. 164 Page No. 105 105 105 105 105 105 105 105 105 105 105 105 105 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 107 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 106 108 108 108 108 108 108 108 108 108 31 108 Part No. 5532-D 5534-D 55-TX-10 55-TX-15 55-TX-20• 55-TX-25 55-TX-30 5608-D 5609-D 5610-D 5612-D 5614-D 5616-D 5618-D 5619-D 5620-D 5622-D 5624-D 5626-D 5628-D 5632-D 5634-D 5636-D 5716-D 5724-D 5812-D 5814-D 5816-D 5818-D 5820-D 5822-D 5826-D• 5828-D 5830-D 5832-D• 5834-D• 5836-D• 5910-D 5912-D 5914-D 5916-D 5918-D 591-PZD 5920-D 592-27 592-PZD 5E08 5E12 5E14 5E16 5E18 5MM11• 5MM21 5MME1 5P08 5P10 5P12 5P14 5P16 5P18 6116-D 6118-D 6120-D 6122-D 6124-D 6130-D 6322-D 6324-D 6326-D 6330-D 6332-D Page No. 108 108 23 23 23 23 23 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 112 18 27 112 7 27 111 111 111 111 111 83 81 83 111 111 111 111 111 111 128 128 128 128 128 128 130 130 130 130 130 Part No. 6334-D 6336-D 6340-D 6344-D 635-10 6352-D 635-3 635-4 635-5 635-6 635-7 635-8 635-9 6414-D 6420-D 6424-D 6428-D 6430-D 6520-D 6524-D 6528-D 6530-D 6B-0808• 6B-0809 6B-0810• 6B-0811• 6B-0812• 6B-0814• 6B-0816• 6B-0818• 6B-0820 6MM11• 6MM11-D 6MM13 6MM21 6MM23 6MM43 6MME1 6MME3 6N-0806-2• 6N-0806-3 6N-0806-4• 6N-0806-6 6N-0808-2• 6N-0808-3 6N-0808-4 6N-0808-5 6N-0808-6 6N-0810-2• 6N-0810-3• 6N-0810-4• 6N-0810-5 6N-0810-6 6N-0811-2 6N-0811-3 6N-0812-2• 6N-0812-3 6N-0812-4 6N-0812-6 6N-0814-2• 6N-0814-3 6N-0814-4 6N-0814-6 6N-0816-2• 6N-0816-3 6N-0818-2• 6N-1410-3 6N-1412-2 6N-1412-3 6N-1414-3 6N-1416-3• Page No. 129 129 129 129 10 129 14 14 14 14 14 14 14 128 128 128 128 128 130 130 130 130 62 62 62 62 62 62 62 62 62 81 81 95 81 96 96 83 99 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 61 63 63 63 63 63 Part No. 6N-1416-4 6N-1416-6 6N-1418-3• 6N-1418-4 6N-1418-8 6N-1420-3 6N-1420-6 6N-1424-3• 6N-1424-6 6N-2028-4 6N-2036-4 7120-D 7122-D 7124-D 7126-D 7128-D 7130-D 7132-D 7134-D 7136-D 7138-D 7140-D 7142-D 7144-D 7148-D 7150-D 7152-D 7154-D 7156-D 7158-D 7160-D 7164-D 7166-D 7168-D 7170-D 7172-D 7176-D 7180-D 71-TX-06 71-TX-07 71-TX-08 71-TX-09 71-TX-10 71-TX-15 71-TX-20 71-TX-25 71-TX-27 71-TX-30 71-TX-40 71-TX-45 71-TX-50 71-TX-55 7322-D 7324-D 7328-D 7330-D 7332-D 7334-D 7336-D 7338-D 7424-D 7428-D 7430-D 7432-D 7434-D 7436-D 7438-D 7440-D 7442-D 7448-D 7530-D• Refer to Page iv for description of Rapid Select. Page No. 63 63 63 63 63 63 63 63 63 63 63 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 133 58 58 58 58 58 58 58 58 58 58 58 58 58 58 135 135 135 135 135 135 135 135 134 134 134 134 134 134 134 134 134 134 135 Part No. Page No. 7532-D 135 7534-D 135 7536-D 135 7624-D 136 7626-D 136 7628-D 136 7630-D 136 7632-D 136 7634-D 136 7636-D 136 7638-D 136 7640-D 136 7642-D 136 7MM03 95 7MM11• 81 7MM11-D 81 7MM13• 95 7MM21• 81 7MM21-D 81 7MM23 96 7MM43 96 7MM43-D 96 7MME1 83 7MME3 99 8124-D 140 8128-D 140 8130-D 140 8132-D• 140 8134-D 140 8136-D 140 8138-D 140 8140-D 140 8142-D 140 8144-D 140 8146-D 140 8148-D 140 8150-D 140 8154-D 140 8156-D 140 8160-D 140 8162-D 140 8164-D 140 822-F 31 830-1 4 830-2• 4 830-27 4 830-3 4 830-4 4 832-F 31 833-F 31 834-F 31 834-TX-25 23 834-TX30-1.62 23 834-TX40-2.95 23 834-TX-45-5 23 834-TX-50 23 834-TX50-1.62 23 8430-D 141 8432-D 141 8434-D 141 8436-D 141 8438-D 141 8440-D 141 8442-D 141 8448-D 141 854-TX-50• 23 854-TX55-150M 23 8622-D 143 8624-D 143 8626-D 143 8628-D 143 Part No. 8630-D 8632-D 8634-D 8636-D 8640-D 8644-D 8646-D 8648-D 8652-D 8654-D 8MM03 8MM11• 8MM11-D 8MM13• 8MM13-D• 8MM21• 8MM21-D 8MM23• 8MM23-D 8MM43• 8MM43-D 8MME1• 8MME3 950-0 950-1• 950-2• 950-3 954-0 954-1• 954-2• 954-3• 954-A-0 954-A-1 954-A-2• 954-A-3 954-B-1 954-B-2• 954-B-3 954-C-0 954-C-1 954-C-2• 954-C-3 9MM03 9MM03-D 9MM11 9MM11-D 9MM13 9MM21 9MM21-D 9MM23 9MM23-D 9MM43 9MM43-D 9MME1 9MME3 A-108• A-110 A-1-10MM• A-1-11MM A-112 A-1-12MM A-1-13MM A-114 A-116 A-118 A-120 A-1-6MM A-1-7MM A-1-8MM A-1-9MM A-3-10MM• Page No. 143 143 143 143 143 143 143 143 143 143 95 81 81 95 95 81 81 96 96 96 96 83 99 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 41 95 95 81 81 93 79 79 96 96 96 96 83 99 158 158 159 159 158 159 159 158 158 158 158 159 159 159 159 159 Part No. A-3-11MM A-312 A-3-12MM A-3-13MM• A-314• A-3-14MM A-3-15MM A-316• A-3-16MM A-3-17MM A-318• A-3-18MM A-3-19MM A-320 A-322 A-324 A-326 A-328 A-5-10MM A-5-11MM A-512 A-5-12MM A-5-13MM A-514 A-5-14MM A-5-15MM A-516• A-5-16MM A-5-17MM A-518• A-5-18MM A-5-19MM A-520 A-5-20MM A-5-21MM A-522 A-5-22MM A-5-23MM A-524 A-5-24MM A-5-25MM A-526 A-528 A-530 A-532 A-534 A-536 A-538 A-540 AM-02• AM-02-3 AM-02-A• AM-03• AM-03-3 AM-03-6 AM-03-A• AM-04• AM-04-3 AM-04-35 AM-04-4• AM-04-5 AM-04-6 AM-04-A AM-05• AM-05-3 AM-05-35 AM-05-4 AM-05-5 AM-05-6 AM-05-8 AM-06• Page No. 159 158 159 159 158 159 159 158 159 159 158 159 159 158 158 158 158 158 159 159 158 159 159 158 159 159 158 159 159 158 159 159 158 159 159 158 159 159 158 159 159 159 159 159 159 159 159 159 159 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 34 Part No. AM-06-3 AM-06-4 AM-06-6• AM-07 AM-08 AM-1.5MM AM-10 AM-10MM AM-2.5MM• AM-2MM• AM-3MM• AM-3MM-3 AM-3MM-4 AM-4MM• AM-5MM• AM-5MM-4 AM-6MM• AM-6MM-4 AM-7MM AM-8MM AN-04 AN-04-6 AN-04-A AN-05• AN-05-6 AN-06• AN-06-6 AN-07 AN-07-8 AN-08• AN-08-8 AN-09 AN-10• AN-10-6 AN-10MM AN-12• AN-12-6 AN-12MM AN-14MM AN-14MM-6 AN-16 AN-16-6 AN-3MM AN-4MM AN-5MM AN-6MM AN-8MM AP-08 AP-10 AP-12 AP-14MM AP-16 AP-18 AP-20 AP-24 APH35M APH38 APH56 APH56M APS312LM APS312M APS38 APS38L APS38LM APS38M APS510 APS511M APS58 APS58M APS58XL APS58XLM Page No. 34 34 34 34 34 35 34 35 35 35 35 35 35 35 35 35 35 35 35 35 36 34 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 36 37 37 37 36 37 37 37 37 40 39 39 40 100 100 93 93 100 100 112 123 112 123 112 123 Part No. Page No. APU37 93 APU37M 100 APU56 113 AS-04 35 AS-05 35 AS-06 35 AS-07 35 AS-08 35 AS-10 35 AS-12 35 AW-375 59 AW-95• 59 AW-95-L• 59 AW-95-LL• 59 BNAE-3MM 31 BNAE-4MM 31 BNAE-4MM-ACR31 BNAE-5MM 31 BNAE-5MM-ACR31 BNAE-6MM 31 BNAE-6MM-ACR31 BNAE-8MM 31 BW-648 130 BW-748 136 BW-7626 136 BW-848 143 BW-848-F 143 BW-8626 143 CMS-1407 83 CMS-1408 83 CMS-1409 83 CMS-1410 83 CMS-1412 83 CMS-1414 83 CMS-1507 83 CMS-1508 83 CMS-1509 83 CMS-1510 83 CMS-3412 112 CMS-3414 112 CMS-3416 112 CMS-3418 112 CMS-3420 112 CMS-3512 112 CMS-3514 112 CMS-3518 112 CMS-3520 112 CMS-5416 125 CMS-5420 125 CMS-5422 125 CMS-5424 125 CMS-5426 125 CMS-5428 125 CMS-5430 125 CMS-5526 125 CMS-5530 125 CMS-7426 138 CMS-7428 138 CMS-7430 138 CMS-7432 138 CMS-8432 145 CMS-8434 145 DB-08 60 DB-10 60 DB-12 60 EX-1000 139 EX-1000-B 145 EX-1001 145 EX-1001-B 145 EX-1003-10 145 EX-1003-12 145 Part No. Page No. EX-1003-15 EX-1003-4 EX-1003-6 EX-1003-8 EX-1003-B-10 EX-1003-B-12 EX-1003-B-15 EX-1003-B-4 EX-1003-B-6 EX-1003-B-8 EX-1005 EX-1005-B EX-1008 EX-1101 EX-1105 EX-250• EX-250-10 EX-250-12• EX-250-2• EX-250-3• EX-250-4• EX-250-5• EX-250-6• EX-250-8• EX-250-B• EX-250-B-12 EX-250-B-2• EX-250-B-3• EX-250-B-4• EX-250-B-5 EX-250-B-6• EX-250-B-8 EX-251 EX-251-10 EX-251-2 EX-251-3 EX-251-4 EX-251-6 EX-251-8 EX-251-B EX-251-B-2 EX-251-B-3 EX-251-B-4 EX-252 EX-252-B EX-254• EX-254-B• EX-255-10 EX-255-12 EX-255-14 EX-255-2• EX-255-3• EX-255-4• EX-255-6• EX-255-8• EX-255-B-2 EX-255-B-4 EX-255-B-6 EX-257-2 EX-257-3 EX-257-4 EX-257-5 EX-257-6• EX-257-B-2 EX-257-B-3 EX-257-B-4 EX-257-B-5 EX-257-B-6 EX-258-2 EX-258-4 EX-258-6 •Denotes a Rapid Select item. 145 145 145 145 145 145 145 145 145 145 148 148 146 146 148 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 64 85 85 104 104 85 85 85 85 85 85 85 85 85 85 85 104 104 104 104 104 104 104 104 104 104 126 127 126 Part No. EX-258-B-2 EX-260 EX-260-B EX-262 EX-262-2 EX-262-3 EX-262-4 EX-262-6 EX-262-B EX-262-B-2 EX-262-B-4 EX-262-B-6 EX-370• EX-370-10• EX-370-2• EX-370-3• EX-370-4• EX-370-5 EX-370-6• EX-370-8• EX-370-B• EX-370-B-10 EX-370-B-2• EX-370-B-3• EX-370-B-4 EX-370-B-6 EX-370-B-8 EX-371• EX-371-10 EX-371-12 EX-371-15 EX-371-2• EX-371-2 3/4 EX-371-3• EX-371-4• EX-371-5• EX-371-6• EX-371-8 EX-371-B EX-371-B-2 EX-371-B-3 EX-371-B-4 EX-371-B-6 EX-372• EX-372-B• EX-374• EX-374-B• EX-375• EX-375-B• EX-376-10• EX-376-12• EX-376-15• EX-376-18• EX-376-2• EX-376-3• EX-376-4• EX-376-5• EX-376-6• EX-376-8• EX-376-9• EX-376-B-10• EX-376-B-12 EX-376-B-15 EX-376-B-2• EX-376-B-3• EX-376-B-4• EX-376-B-5 EX-376-B-6• EX-376-B-8• EX-376-B-9 EX-377-10 Page No. 126 126 126 64 64 64 64 64 64 64 64 64 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 65 85 85 103 103 126 126 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 103 127 Part No. EX-377-12 EX-377-15 EX-377-2• EX-377-3 EX-377-4• EX-377-5 EX-377-6• EX-377-8 EX-377-B-10 EX-377-B-12 EX-377-B-2 EX-377-B-3 EX-377-B-4 EX-377-B-5 EX-377-B-6 EX-377-B-9 EX-380 EX-380-2 EX-380-3 EX-380-4 EX-380-6 EX-380-B EX-380-B-2 EX-380-B-3 EX-500-2• EX-500-3• EX-500-4 EX-500-6 EX-500-B-2• EX-500-B-3• EX-500-B-4 EX-500-B-6 EX-501-10 EX-501-12 EX-501-15 EX-501-2• EX-501-3• EX-501-4• EX-501-5 EX-501-6 EX-501-8 EX-501-B-10 EX-501-B-12 EX-501-B-2• EX-501-B-3 EX-501-B-4 EX-501-B-5 EX-501-B-6 EX-501-B-8 EX-502 EX-502-3• EX-502-4 EX-502-5 EX-502-6 EX-502-8 EX-502-B EX-502-B-3 EX-502-B-4 EX-503• EX-503-B• EX-504 EX-504-B EX-505 EX-505-B EX-506 EX-506-B EX-507-2 EX-507-3 EX-507-4 EX-507-6 EX-507-B-3 Page No. 127 127 126 126 126 127 127 127 127 127 126 126 126 127 127 127 65 65 65 65 65 65 65 65 66 66 66 66 65 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 66 104 104 126 126 132 132 139 139 104 104 104 104 104 Part No. EX-507-B-4 EX-507-B-6 EX-508-10• EX-508-12• EX-508-15• EX-508-16 EX-508-18• EX-508-2• EX-508-3• EX-508-4• EX-508-5• EX-508-6• EX-508-8• EX-508-9 EX-508-B-10• EX-508-B-12 EX-508-B-15 EX-508-B-2 EX-508-B-3 EX-508-B-4 EX-508-B-5• EX-508-B-6• EX-508-B-8 EX-508-B-9 EX-509-10 EX-509-12 EX-509-3 EX-509-4 EX-509-5 EX-509-6 EX-510-3 EX-510-4 EX-510-6 EX-510-8 EX-510-B-3 EX-510-B-4 EX-510-B-6 EX-510-B-8 EX-512-2 EX-512-3 EX-512-B-2 EX-512-B-4 EX-620-3 EX-620-6 EX-621-3 EX-621-4 EX-621-6 EX-621-8 EX-621-B-3 EX-622 EX-623 EX-623-B EX-624 EX-624-B EX-625 EX-625-B EX-626-3 EX-626-4 EX-626-6 EX-627-10 EX-627-12 EX-627-15 EX-627-4 EX-627-6 EX-627-8 EX-628-3 EX-750 EX-750-B EX-751• EX-751-B• EX-752 Page No. 104 104 126 126 126 126 126 126 126 126 126 126 126 126 127 127 127 126 126 126 126 126 126 126 132 132 132 132 132 132 139 139 139 139 139 139 139 139 66 66 66 66 67 67 67 67 67 67 67 104 127 127 131 131 139 139 127 127 127 131 131 131 131 131 131 139 104 104 127 126 132 Part No. EX-752-B EX-753 EX-753-B EX-754 EX-754-B EX-755-10 EX-755-12 EX-755-15 EX-755-4 EX-755-6 EX-755-8 EX-755-B-10 EX-755-B-12 EX-755-B-15 EX-755-B-4 EX-755-B-6 EX-755-B-8 EX-756-4 EX-756-6 EX-756-8 EX-756-B-4 EX-756-B-6 EX-756-B-8 EX-757-3 EX-757-B-3 EX-758-4 EX-758-6 EX-758-9 EX-758-B-4 EX-758-B-6 EX-759-4 EXL-1000 EXL-1003-15 EXL-1003-8 EXL-1100 EXL-15 EXL-750 EXL-8 FL-1108 FL-1109 FL-1110• FL-1111 FL-1112 FL-1114 FL-1116 FL-1118 FL-1212 FL-1214 FL-1216 FL-3012• FL-3014 FL-3016• FL-3020 FL-3022 FL-3024 FL-3108 FL-3110 FL-3112 FL-3114 FL-3116• FL-3118 FL-3119 FL-3120 FL-3122 FL-3124 FL-3210 FL-3212 FL-3214 FL-3216 FL-3218 FL-3220 Page No. 132 138 138 146 146 138 138 138 138 138 138 138 138 138 138 138 138 146 146 146 146 146 146 67 67 67 67 67 67 67 67 155 155 155 155 155 155 155 79 79 79 79 79 79 79 79 79 79 79 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 91 91 91 91 91 91 Part No. Page No. FL-3312 91 FL-3314 91 FL-3316 91 FL-3318 91 FL-3320 91 FL-3324 91 FL-3326 90 FL-3410 90 FL-3412 90 FL-3414 90 FL-5112 109 FL-5114 109 FL-5116 109 FL-5118• 109 FL-5120 109 FL-5122 109 FL-5124 109 FL-5126 109 FL-5128 109 FL-5130 109 FL-5132 109 FL-5134 109 FL-5214 110 FL-5216 110 FL-5218 110 FL-5220 110 FL-5222 110 FL-5224 110 FL-5226 110 FL-5228 110 FL-5316 110 FL-5318• 110 FL-5320 110 FL-5322 110 FL-5324• 110 FL-5326 110 FL-5414 109 FL-5416 109 FL-5418 109 FL-6120 129 FL-6124 129 FL-6128 129 FL-6132 129 FL-6320 130 FL-6324 130 FL-6326 130 FL-6328 130 FL-6330 130 FL-HE-9518 130 FL-SH-335 109 FL-SH-336 109 FL-SH-338 109 FL-SW-282 109 FL-SW-493 110 FND-185-3MM 37 FND-185-4MM 37 FND-185-5MM 37 FND-185-8MM 37 FND-1PH 7 FND-1PZD 28 FND-2PH 7 FND-2PH-70M 7 FND-2PZD 28 FND-2PZD-70M 28 FND-320-A 18 FND-320-B 18 FND-320-C 18 FND-320-E 18 FND-320-F 18 FND-320-H 18 FND-320-I 18 Part No. Page No. FND-3PH 7 FND-3PZD 28 FND-3PZD-70M 28 FND-TX10 24 FND-TX20 24 FND-TX25 24 FND-TX27 24 FND-TX30 24 HA-510 77 HC-100-1/2• 152 HC-100-1/4• 152 HC-100-10 152 HC-100-3/4 152 HC-100-3/8 FS•152 HC-100-5/16• 152 HC-100-5/8 152 HC-100-7/16 152 HC-3520 86 HC-3816 86 HC-3816-D 86 HE-100-1/2• 152 HE-100-1/4 152 HE-100-3/4 152 HE-100-3/8 FS 152 HE-100-5/16 152 HE-100-5/8 152 HE-100-7/16 152 HE-1028 106 HE-1028-D 106 HE-2422 106 HE-2422-D 106 HE-530 106 HE-530-D 106 HE-9518 107 HE-9518-D 107 HT-848• 156 HT-848-6 1/2 156 HTN-B-1 48 HTN-B-2 48 HTN-B-3 48 HTN-B-4 48 HTS-0 48 HTS-1• 48 HTS-10 48 HTS-12 48 HTS-2• 48 HTS-3• 48 HTS-3A• 48 HTS-4• 48 HTS-4A• 48 HTS-5• 48 HTS-6• 48 HTS-7 48 HTS-8 48 HTS-9 48 KA-103-3 94 KA-103-4 94 KA-103-6 94 KA-104-12 94 KA-104-3 94 KA-104-4 94 KA-104-6 94 KA-104-9 94 KA-105-12 94 KA-105-3 94 KA-105-4 94 KA-105-6 94 KA-43-3 94 KA-43-4 94 KA-43-6 94 KA-44-3 94 Part No. KA-44-4 KA-44-6 KA-45-3 KA-45-4 KA-45-6 KA-45-9 KA-6-10M-12 KA-6-10M-3 KA-6-10M-6 KA-6-10M-9 KA-7-11M-12 KA-7-11M-3 KA-7-11M-6 KA-7-12M-12 KA-7-12M-3 KA-7-12M-4 KA-7-12M-6 KA-7-12M-9 KA-7-13M-12 KA-7-13M-3 KA-7-13M-4 KA-7-13M-6• KA-7-13M-9 KA-7-14M-12 KA-7-14M-3 KA-7-14M-4 KA-7-14M-6 KA-7-14M-9 KA-8-15M-12 KA-8-15M-4 KA-8-15M-6 KA-8-15M-9 KAM-25-3 KAM-37-3 KAM-37-B-3 KAM-38-3 KAM-38-6 KB-10-19M-3 KB-10-19M-6 KB-10-19M-9 KB-104-6 KB-104-9 KB-105-12 KB-105-3 KB-105-4 KB-105-6 KB-105-9 KB-202-12 KB-202-4 KB-202-6 KB-203-12 KB-203-3 KB-203-6 KB-203-9 KB-205-12 KB-205-3 KB-205-4 KB-205-6 KB-205-9 KB-317-3 KB-317-6 KB-318-12 KB-318-3 KB-318-6 KB-318-9 KB-320-12 KB-320-3 KB-320-4 KB-320-6 KB-320-9 KB-321-12 Page No. 94 94 94 94 94 94 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 101 104 104 104 104 104 72 72 72 70 70 70 70 70 70 70 70 70 70 70 70 70 70 71 71 71 71 71 70 70 71 70 71 71 71 71 71 71 71 71 Refer to Page iv for description of Rapid Select. 165 Part No. Page No. KB-321-3 71 KB-321-6 71 KB-321-9 71 KB-322-12 71 KB-322-3 71 KB-322-4 71 KB-322-6 71 KB-322-9 71 KB-40-3 70 KB-40-4 70 KB-40-6 70 KB-40-9 70 KB-43-3 70 KB-43-4 70 KB-43-6 70 KB-44-12 70 KB-44-3 70 KB-44-4 70 KB-44-6 70 KB-44-9 70 KB-45-12 70 KB-45-3 70 KB-45-4 70 KB-45-6 70 KB-45-9 70 KB-6-10M-3 71 KB-6-10M-6 71 KB-6-10M-9 71 KB-7-11M-12 71 KB-7-11M-3 71 KB-7-11M-4 71 KB-7-11M-6 71 KB-7-12M-3 72 KB-7-12M-6 72 KB-7-12M-9 72 KB-7-13M-12 72 KB-7-13M-3 72 KB-7-13M-4 72 KB-7-13M-6 72 KB-7-13M-9 72 KB-7-14M-3 72 KB-7-14M-4 72 KB-7-14M-6 72 KB-7-14M-9 72 KB-8-15M-12 72 KB-8-15M-6 72 KB-8-15M-9 72 KB-8-16M-3 72 KB-8-16M-6 72 KB-8-16M-9 72 KB-8-17M-12 72 KB-8-17M-3 72 KB-8-17M-6 72 KB-8-17M-9 72 KB-8-18M-12 72 KB-8-18M-3 72 KB-8-18M-6 72 KB-8-18M-9 72 KBM-37-3 160 KC-100-12 68 KC-100-3 68 KC-100-6 68 KC-101-3 68 KC-101-6 68 KC-102-3 68 KC-102-6 68 KC-102-9 68 KC-103-3 68 KC-103-6 68 KC-103-9 68 KC-104-12 68 Part No. KC-104-3 KC-104-6 KC-104-9 KC-105-12 KC-105-3 KC-105-4 KC-105-6• KC-105-9 KC-25-12 KC-25-3 KC-25-4 KC-25-6• KC-25-9 KC-26-12 KC-26-3 KC-26-4 KC-26-6 KC-26-9 KC-27-12 KC-27-3 KC-27-6 KC-28-12 KC-28-3 KC-28-4 KC-28-6 KC-28-9 KC-29-12 KC-29-3 KC-29-6• KC-30-3 KC-30-4 KC-30-6• KC-30-9 KC-5-7M-3 KC-5-7M-4 KC-5-7M-6 KC-5-7M-9 KC-6-10M-12 KC-6-10M-3 KC-6-10M-4 KC-6-10M-6 KC-6-10M-9 KC-6-8M-3 KC-6-8M-4 KC-6-8M-6 KC-6-8M-9 KC-6-9M-3 KC-6-9M-6 KC-7-11M-3 KC-7-11M-6 KC-7-11M-9 KC-7-12M-3 KC-7-12M-6 KC-7-12M-9 KC-7-13M-3 KC-7-13M-6 KC-7-13M-9 KCM-25-3 KCM-25-B-3 KCM-37-3 KCM-37-B-3 KD-103-6 KD-104-6 KD-105-3 KD-105-4 KD-105-6• KD-205-12 KD-205-6 KD-43-6 KD-43-9 KD-44-12 •Denotes a Rapid Select item. 166 Page No. 68 68 68 69 69 69 69 69 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 69 160 160 160 160 94 94 94 94 94 94 94 94 94 94 Part No. KD-44-6 KD-44-9 KD-45-6 KD-6-10M-12 KD-6-10M-6• KD-6-10M-9 KD-7-11M-12 KD-7-12M-12 KD-7-12M-6 KD-7-12M-9 KD-7-13M-12 KD-7-13M-6• KD-7-13M-9 KD-7-14M-6• KD-7-14M-9 KD-8-15M-12 KD-8-15M-6• KD-8-15M-9 KDM-25-3 KDM-37-3 KDM-37-B-3 KDM-37-6• KDM-38-3 KEM-37-B-6 KH-10-19M-6 KH-104-12 KH-104-3 KH-104-4 KH-104-6 KH-104-9 KH-105-3 KH-105-4 KH-105-6• KH-202-12 KH-202-3 KH-202-6 KH-203-12 KH-203-6 KH-203-9 KH-205-12 KH-205-3 KH-205-4 KH-205-6 KH-205-9 KH-318-3 KH-318-4 KH-318-6 KH-318-9 KH-320-12 KH-320-3 KH-320-6 KH-320-9 KH-321-12 KH-321-3 KH-321-4 KH-321-6 KH-321-9 KH-322-12 KH-322-3 KH-322-4 KH-322-6 KH-322-9 KH-404-12 KH-404-3 KH-404-4 KH-404-6 KH-404-9 KH-409-12 KH-409-3 KH-409-4 KH-409-6 Page No. 94 94 94 111 111 111 111 111 111 111 111 111 111 111 111 111 111 111 104 104 104 104 104 160 123 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 115 114 115 115 115 115 115 115 115 115 115 115 114 115 115 115 115 115 115 115 115 115 115 Part No. KH-409-9 KH-43-3 KH-43-6 KH-43-9 KH-44-3 KH-44-4 KH-44-6 KH-44-9 KH-45-3 KH-45-4 KH-45-6 KH-7-12M-12 KH-7-12M-3 KH-7-12M-4 KH-7-12M-6 KH-7-12M-9 KH-7-13M-12 KH-7-13M-3 KH-7-13M-4 KH-7-13M-6 KH-7-13M-9 KH-7-14M-12 KH-7-14M-4 KH-7-14M-6 KH-8-15M-12 KH-8-15M-3 KH-8-15M-4 KH-8-15M-6 KH-8-15M-9 KH-8-16M-12 KH-8-16M-6 KH-8-16M-9 KH-8-17M-4 KH-8-17M-6 KH-8-17M-9 KH-8-18M-3 KH-8-18M-4 KH-8-18M-6• KHM-50-3 KHM-50-B-3 KN-104-12 KN-104-6 KN-105-6 KN-105-9 KN-202-12 KN-202-6 KN-202-8 KN-203-12 KN-203-6• KN-203-9 KN-205-12 KN-205-6 KN-205-9 KN-318-3 KN-318-4 KN-318-6 KN-320-12 KN-320-6 KN-320-9 KN-321-6 KN-321-9 KN-322-12 KN-322-6• KN-322-9 KN-404-12 KN-404-6 KN-404-9 KN-43-6 KN-44-12 KN-44-6• KN-45-6 Page No. 115 114 114 114 114 114 114 114 114 114 114 123 123 123 123 123 124 123 123 123 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 124 127 127 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 114 115 115 115 115 115 115 115 115 115 115 115 114 114 114 114 Part No. Page No. KN-45-9 KN-7-12M-6 KN-7-12M-9 KN-7-13M-6• KN-7-13M-9 KN-7-14M-6• KN-7-14M-9 KN-8-15M-12 KN-8-15M-6• KN-8-15M-9 KN-8-16M-12 KN-8-16M-6• KN-8-16M-9 KN-8-17M-6 KN-8-17M-9 KN-8-18M-12 KN-8-18M-6 KN-8-18M-9 KNM-50-3 KNM-50-B-6 KS-100-6 KS-100-9 KS-101-6 KS-102-6 KS-102-9 KS-103-6 KS-103-9 KS-104-6 KS-104-9 KS-105-6 KS-105-9 KS-25-12 KS-25-6 KS-25-9 KS-26-12 KS-26-6• KS-26-9 KS-27-6 KS-28-12 KS-28-6• KS-28-9 KS-29-6 KS-29-9 KS-30-12 KS-30-6 KS-30-9 KS-5-7M-12 KS-5-7M-6 KS-5-7M-9 KS-6-10M-6 KS-6-10M-9 KS-6-8M-6 KS-6-8M-9 KS-7-11M-6 KS-7-11M-9 KS-7-13M-12 KS-7-13M-6 KS-7-13M-9 KSM-25-3 KSM-25-B-3 KSM-37-3 KSM-37-B-4 KT-10-19M-12 KT-10-19M-6 KT-104-6 KT-104-9 KT-105-12 KT-105-6 KT-105-9 KT-202-12 KT-202-6 Refer to Page iv for description of Rapid Select. 114 123 123 123 124 124 124 124 124 124 124 124 124 124 124 124 124 124 127 127 68 68 68 68 68 68 68 68 68 69 69 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 69 69 69 69 69 69 69 69 69 69 69 69 160 160 160 160 72 72 70 70 70 70 70 70 70 Part No. Page No. KT-202-9 70 KT-203-12 70 KT-203-6• 70 KT-203-9 70 KT-205-12 71 KT-205-6 71 KT-205-9 71 KT-317-6 70 KT-318-12 71 KT-318-3 70 KT-318-6• 71 KT-318-9 71 KT-320-12 71 KT-320-6 71 KT-320-9 71 KT-321-12 71 KT-321-6 71 KT-321-9 71 KT-322-12 71 KT-322-6 71 KT-322-9 71 KT-40-6 70 KT-40-9 70 KT-43-6 70 KT-43-9 70 KT-44-12 70 KT-44-6 70 KT-44-9 70 KT-45-12 70 KT-45-6 70 KT-45-9 70 KT-6-10M-12 71 KT-6-10M-6 71 KT-6-10M-9 71 KT-7-11M-6 71 KT-7-13M-12 72 KT-7-13M-6 72 KT-7-13M-9 72 KT-7-14M-12 72 KT-7-14M-6 72 KT-7-14M-9 72 KT-7-15M-6 72 KT-7-15M-8 72 KT-8-13M-9 72 KT-8-15M-12 72 KT-8-15M-6 72 KT-8-15M-9 72 KT-8-16M-12 72 KT-8-16M-6 72 KT-8-16M-9 72 KT-8-17M-6 72 KT-8-18M-12 72 KT-8-18M-6 72 KT-8-18M-9 72 KTM-37-3 160 L• 16 L-320• 17 L-322 17 L-328 17 M• 16 M-10MM03• 97 M-10MM11• 82 M-10MM13• 97 M-10MM15• 118 M-10MM21• 82 M-10MM43• 97 M-10MM45 118 M-10MME1• 83 M-10MME3• 99 M-1105 78 M-1106• 78 Part No. M-1107 M-1108• M-1110• M-1112• M-1114• M-1116• M-1118 M-1120 M-11MM03 M-11MM11 M-11MM13• M-11MM15 M-11MM21 M-11MM43 M-11MM45 M-11MME1 M-11MME3 M-1208• M-1209 M-1210• M-1211 M-1212 M-1214 M-1216 M-12MM03 M-12MM11 M-12MM13• M-12MM15 M-12MM21 M-12MM35 M-12MM43• M-12MM45 M-12MME1 M-12MME3 M-13MM03• M-13MM11 M-13MM13• M-13MM15• M-13MM21 M-13MM25 M-13MM35 M-13MM43• M-13MM45 M-13MME1• M-13MME3• M-13MME5 M-14MM11 M-14MM13• M-14MM15• M-14MM21 M-14MM43 M-14MM45 M-1500-P• M-1505-P M-1550-P M-15MM03• M-15MM11 M-15MM13• M-15MM15• M-15MM25 M-15MM35• M-15MM43 M-15MM45 M-15MME5 M-15PV M-15PVH M-15PVH-A M-15-SC• M-15-SC-A• M-16MM13 M-16MM15 Page No. 78 78 77 78 78 78 78 78 97 83 97 118 83 97 118 83 99 78 78 78 79 79 79 79 97 90 97 118 83 119 97 118 83 99 97 83 97 118 83 119 119 97 118 83 99 122 82 97 118 82 97 118 57 57 57 97 82 97 118 119 119 97 118 122 59 59 59 58 58 97 117 Part No. M-16MM45 M-17MM13• M-17MM15 M-18MM03 M-18MM13• M-18MM15• M-18MM25 M-19MM15 M1E06• M1E07 M1E08• M1E09 M1E10• M1E11 M1E12• M1E14• M1E16• M1P06• M1P07 M1P08• M1P10• M1P11 M1P12• M1P14• M1P16• M-21MM15 M-3.5MME1 M-3012• M-3014 M-3016• M-3018• M-3108 M-3109 M-3110• M-3111 M-3112• M-3114• M-3115 M-3116• M-3117 M-3118• M-3119 M-3120• M-3122 M-320*I• M-320*R M-320*X M-321*X M-3212• M-3214 M-3216• M-3218 M-322*X M-328*X M-32-TX-15 M-32-TX-20 M-3408 M-3409 M-3410 M-3411 M-3412• M-3414• M-3416• M-3418• M-3420 M-3424 M-3426 M-3430 M-3514 M3E08• M3E09 Page No. 118 97 118 97 97 118 119 118 79 79 79 79 79 79 79 79 79 80 80 80 80 80 80 80 80 118 83 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 17 17 17 18 89 89 89 89 17 17 22 22 88 89 89 89 89 89 89 89 89 89 89 89 89 92 92 Part No. M3E10• M3E11 M3E12• M3E14• M3E16 M3E18 M3P08 M3P09 M3P10• M3P11 M3P12• M3P14 M3P16• M3P18 M-4.5MME1 M-400 M-44-90 M-450 M-460 M-470 M-480 M-480-6 M-488• M-490• M-490-10• M-490-12• M-490-2• M-490-2-OR• M-490-4• M-490-6• M-490-8• M-490-OR M-495• M-495-5 M-497• M-498• M-4MME1• M-5.5MM11• M-5.5MME1• M-510 M-5108 M-5110 M-5112 M-5114 M-5116 M-5118 M-5120 M-5122 M-5124 M-5126 M-5216 M-5218 M-5220 M-5316 M-5318 M-5412 M-5414 M-5416 M-5418 M-5420 M-5512 M-5518 M5E08 M5E10 M5E12• M5E14• M5E16• M5E18 M-5MM11• M-5MM21 M-5MME1• Page No. 92 92 92 92 92 92 92 92 92 92 92 92 92 92 83 54 52 54 54 54 54 54 54 52 52 52 52 52 52 52 52 52 52 52 52 53 83 82 83 54 108 108 108 108 108 108 108 108 108 108 109 109 109 109 109 108 108 108 108 108 109 109 111 111 111 111 111 111 83 83 84 Part No. Page No. M5P08 111 M5P10 111 M5P12 111 M5P14 111 M5P16 111 M5P18 111 M-610 53 M-630 53 M-638 53 M-6MM11• 82 M-6MM13 97 M-6MM21 82 M-6MM43 97 M-6MME1• 83 M-6MME3 99 M6N-08-8M-4 62 M6N-08-8M-6 62 M6N-08-10M-4 62 M6N-08-10M-6 62 M6N-08-12M-4 62 M6N-08-12M-6 62 M6N-0806-2• 61 M6N-0806-3• 61 M6N-0806-5 61 M6N-0806-6 61 M6N-0808-2• 61 M6N-0808-3• 61 M6N-0808-4• 61 M6N-0808-5 61 M6N-0808-6• 61 M6N-0810-2• 61 M6N-0810-3• 61 M6N-0810-4• 61 M6N-0810-5 61 M6N-0810-6• 61 M6N-0811-2 61 M6N-0811-3 61 M6N-0812-2• 61 M6N-0812-3• 61 M6N-0812-4 61 M6N-0812-6• 61 M6N-0814-2• 61 M6N-0814-3 61 M6N-0814-4 61 M6N-0814-6 61 M6N-0816-2• 61 M6N-0816-3• 61 M6N-0818-2 61 M-7MM11• 82 M-7MM13• 97 M-7MM21• 82 M-7MME1• 83 M-7MME3• 99 M-825• 55 M-835• 55 M-838• 55 M-855• 55 M-858 55 M-8MM11• 82 M-8MM13• 97 M-8MM21• 82 M-8MM43 97 M-8MME1• 83 M-8MME3• 99 M-9MM11 82 M-9MM13 97 M-9MM21• 82 M-9MM43 97 M-9MME1• 83 M-9MME3 99 MB-10MM21• 83 Part No. Page No. MB-10MM23• MB-10MM25• MB-10MM33• MB-11MM21• MB-11MM23• MB-1206 MB-1208• MB-1209 MB-1210• MB-1211• MB-1212• MB-1214• MB-1216• MB-1218 MB-12MM21• MB-12MM23• MB-12MM25 MB-12MM33 MB-1308• MB-1311 MB-1312• MB-1314 MB-13MM21• MB-13MM23• MB-13MM25• MB-13MM33• MB-14MM21 MB-14MM23• MB-14MM25 MB-15MM21 MB-15MM23• MB-15MM25• MB-15MM33 MB-15MM35 MB-16MM21 MB-16MM23 MB-16MM25 MB-17MM23 MB-18MM23• MB-18MM25• MB-18MM35• MB-3210• MB-3212• MB-3214• MB-3216• MB-3218• MB-3220 MB-3314• MB-3318 MB-3512• MB-3514• MB-3516 MB-5.5MM21• MB-5210 MB-5212 MB-5214• MB-5216• MB-5220 MB-5MM21 MB-6MM21• MB-6MM23 MB-7MM21• MB-7MM23 MB-8MM21• MB-8MM23• MB-9MM21• MB-9MM23 MB-HE-9518 MDA-08• MDA-10• MDA-12• •Denotes a Rapid Select item. 98 119 98 82 98 78 78 78 78 79 79 79 79 79 82 98 119 98 78 79 79 79 82 98 119 98 82 98 119 82 98 119 98 119 82 98 119 98 98 119 119 89 89 89 89 89 89 89 89 89 89 89 82 109 109 109 109 109 82 82 98 82 98 82 98 82 98 109 60 60 60 Part No. MDA-14• MDA-6MM MDA-7MM• MDA-8MM• MDA-10MM• MDA10MM-80M MDAT-08• MDB-08• MDB-10• MDB-12• MDB-14• MDC-08 MDC-10 MDC-12 MET-1301C MET-1302C MET-1401C MET-1402C MET-1600C MET-1800C MF-25• MF-25-B MF-27 MF-27-B MF-37• MF-37-B• MF-38• MF-38-B MF-39 MF-39-B MF-50• MF-50-B• MF-51 MF-51-B MF-55• MF-55-B MF-62 MF-62-B MF-70 MF-70-B MF-75 MF-75-B MF-76 MF-76-B MF-77 MF-77-B MF-79 MF-79-B MF-82 MF-82-B MFL MFL-1000 MFL-250 MFL-750 MHA-510• MHC-3816 MHM-10MM MHM-1310 MHM-1912 MHM-2508 MHM-6MM MHM-7MM MHM-8MM MQR-15PV MR-7MME1• MSH-335 MSH-336 MSH-400 MSH-401 MSH-402 Page No. 60 60 60 60 60 60 60 56 60 60 60 60 60 60 156 156 156 156 156 156 82 82 104 104 104 104 104 104 127 127 127 127 132 132 127 127 132 132 127 127 139 139 139 139 146 146 139 139 146 146 156 156 156 156 78 96 69 69 69 69 76 76 76 68 83 116 116 151 151 151 Part No. Page No. MSH-575 151 MSW-343 96 MSW-350• 151 MSW-604 96 MSW-90• 151 MSW-90-B• 151 MSW-984 15 MSW-984-B• 151 MT-503 78 MT-752 78 MT-753 78 MT-754 78 MX-1108 78 MX-1108-E• 78 MX-1109 78 MX-1110• 78 MX-1111 78 MX-1112• 78 MZA-110• 153 MZA-310• 153 MZA-314 153 MZA-510 153 MZA-514 153 MZN-312 153 MZN-314 153 MZN-514 153 NOL 16 NOL-320 17 NOL-320 17 NP-32-TX-25 22 OL-322 17 OOL-322 17 OOOL-322 17 OS-8MM13 95 OS-10MM 81 OS-10MM03 95 OS-10MM23 96 OS-10MM23-D 96 OS-3310-D 87 OS-3410• 87 OS-5424 106 OS-5516 108 OS-5518 108 OSM-3410 89 OSM-3414 89 OSMB-10MM21•83 OSMB-10MM23•98 OSSF-8MM23 99 OSSF-10MM23 99 OSSF-10MM43• 99 OSSF-3512 91 OSSF-3514 91 P• 16 P-1408 42 P-1409 42 P-1410 42 P-1412 42 P-1414 42 P-1416 42 P-320• 17 P-321 18 P-322 17 P-328 17 QR-108• 56 QR-308• 56 QR-314• 56 QR-508• 56 QR-514• 56 QR-520 56 QR-614 56 QR-620 56 Part No. QR-714 QR-720• QR-820 QR-824 QRA-08• QRA-14 QRF-08 QRF-14• QRF-20 QR-M-490-2 QR-M-490200M QR-M-490-A• QR-M-490-A6 R• R-320• R-321 R-322 R-328 R-32-TX-27 RM-490• RM-490-4 RM-490-6 RP-314• RP-514• RP-520 RP-614 RP-620 RP-720 RP-724 RP-728 RP-820 RP-820-L RP-828 S• S-320 S-321 S-321 S-328 S-32-TX-30 SA-120 SA-120-D SA-122 SA-122-D• SA-123• SA-123-D SA-124• SA-124-D SA-125• SA-125-D SA-15-6M SA-15-7M SA-16-10M SA-16-8M SA-200 SA-201 SA-202 SA-202-D SA-203 SA-203-D SA-205 SA-205-D SA-216 SA-216-D SA-217 SA-217-D SA-218• SA-218-D SA-219• SA-219-D SA-221• Page No. 56 56 56 56 56 56 56 56 56 53 53 53 53 16 17 18 17 17 22 52 52 52 55 55 55 55 55 55 55 55 55 56 55 16 17 18 18 17 22 93 93 93 93 93 93 93 93 93 93 83 83 83 83 93 93 101 93 93 93 93 93 113 113 113 113 113 113 113 113 113 Part No. SA-221-D• SA-25 SA-25-D SA-26 SA-26-D SA-28• SA-28-D SA-29 SA-29-D SA-30 SA-301 SA-302 SA-304 SA-305 SA-306 SA-306-D SA-30-D SA-316 SA-317 SA-318 SA-318-D SA-320 SA-320-D SA-321 SA-321-D SA-322• SA-322-D SA-36-10M• SA-37-11M SA-37-12M• SA-37-13M• SA-37-14M SA-38-15M• SA-38-17M SA-38-18M SA-402 SA-402-D SA-404• SA-404-D SA-406 SA-407 SA-409• SA-409-D SA-410 SA-411 SA-430 SA-432 SA-434 SA-436 SA-439 SA-501 SA-505 SA-508• SA-510 SA-510-19M SA-510-20M SA-510-21M SA-510-22M SA-510-23M SA-510-24M• SA-535 SA-537 SA-538 SA-563 SA-565 SA-568 SA-57-13M• SA-57-14M SA-58-15M• SA-58-16M SA-58-17M• Page No. 113 80 80 80 80 80 80 80 80 80 93 93 93 93 93 93 80 113 113 113 113 113 113 113 113 113 113 100 100 100 100 100 100 100 100 113 113 113 113 113 113 113 113 113 113 130 130 130 130 130 113 113 113 113 123 123 123 123 123 123 136 136 136 130 130 130 123 123 123 123 123 Part No. Page No. SA-58-18M• 123 SA-601 136 SA-603 136 SA-604 136 SA-606 136 SA-607 136 SA-609 136 SA-610 136 SA-65 80 SA-712 136 SA-716 136 SA-743 136 SC-108• 55 SC-114 55 SC-308• 55 SC-314• 55 SC-508 55 SC-514• 55 SC-520• 55 SC-529• 115 SC-614 55 SC-620 55 SC-720 55 SC-724 55 SC-728 55 SC-820 55 SC-828 55 SD-1055-A 2 SD-1342-2• 6 SD-1342-2-PZD 29 SD-2052-10 4 SD-2052-8• 4 SD-3749 26 SD-4048 25 SD-4064-G 26 SD-4693 21 SD-556 5 SD-556-A 5 SF-10MM03• 98 SF-10MM11 82 SF-10MM13• 98 SF-10MM15• 120 SF-10MM21 82 SF-10MM23• 99 SF-10MM25• 121 SF-10MM33• 99 SF-10MM35 121 SF-10MM43• 99 SF-10MM45 120 SF-10MM55 122 SF-1112 79 SF-1114 79 SF-1116 79 SF-1118 79 SF-11MM03 98 SF-11MM11 82 SF-11MM13 98 SF-11MM15• 120 SF-11MM21 82 SF-11MM23 99 SF-11MM25 121 SF-11MM43 99 SF-11MM45• 120 SF-11MM55 122 SF-1212 79 SF-12MM03 98 SF-12MM13 98 SF-12MM15 120 SF-12MM21 82 SF-12MM23 99 SF-12MM25 121 Part No. SF-12MM35 SF-12MM43 SF-12MM45 SF-12MM55 SF-13MM03• SF-13MM11 SF-13MM13• SF-13MM15• SF-13MM21 SF-13MM23• SF-13MM25• SF-13MM33• SF-13MM35• SF-13MM43• SF-13MM45• SF-13MM55• SF-14MM03 SF-14MM11 SF-14MM13 SF-14MM15 SF-14MM21 SF-14MM25 SF-14MM35 SF-14MM45 SF-14MM55 SF-15MM03 SF-15MM11 SF-15MM13 SF-15MM15• SF-15MM16• SF-15MM23• SF-15MM25• SF-15MM33 SF-15MM35• SF-15MM36• SF-15MM43 SF-15MM45• SF-15MM55 SF-16MM13 SF-16MM15 SF-16MM16 SF-16MM25• SF-16MM35 SF-16MM43 SF-16MM45 SF-16MM55 SF-17MM03 SF-17MM13 SF-17MM15• SF-17MM16 SF-17MM23 SF-17MM25• SF-17MM35 SF-17MM43 SF-17MM45• SF-17MM55 SF-18MM03 SF-18MM13 SF-18MM15• SF-18MM16• SF-18MM23 SF-18MM25• SF-18MM35 SF-18MM36• SF-18MM43 SF-18MM45 SF-18MM55• SF-19MM03 SF-19MM13 SF-19MM15• SF-19MM16 Page No. 121 99 120 122 98 82 98 120 82 99 121 99 121 99 120 122 98 82 98 120 82 121 121 120 122 98 82 98 120 131 99 121 99 121 131 99 120 122 98 120 131 121 121 99 120 122 98 98 120 131 99 121 121 99 120 122 98 98 120 131 99 121 121 131 99 120 122 98 98 120 131 Part No. SF-19MM23 SF-19MM25 SF-19MM35 SF-19MM36• SF-19MM43 SF-19MM45 SF-19MM55 SF-20MM15 SF-20MM45 SF-21MM15• SF-21MM16• SF-21MM25• SF-21MM35• SF-21MM36• SF-21MM45 SF-21MM55 SF-22MM15• SF-22MM16 SF-22MM25 SF-22MM35 SF-22MM36 SF-22MM45 SF-23MM35 SF-24MM15 SF-24MM16 SF-24MM25 SF-24MM35 SF-24MM36 SF-24MM55 SF-3010 SF-3012 SF-3014 SF-3016 SF-3018 SF-3028 SF-3108 SF-3110 SF-3112 SF-3114 SF-3116 SF-3118 SF-3120 SF-3122 SF-3124 SF-3212 SF-3214 SF-3216 SF-3218 SF-3220 SF-3222 SF-3224 SF-3226 SF-3312 SF-3314 SF-3316• SF-3318 SF-3320 SF-3322 SF-3324 SF-3412 SF-3414 SF-3416• SF-3418 SF-3420 SF-3422 SF-3430 SF-3432 SF-3512 SF-3514 SF-3516 SF-3518 Page No. 99 131 121 131 99 120 122 120 120 120 131 131 131 131 120 122 120 131 121 121 131 120 121 119 131 121 121 131 122 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 91 91 91 91 91 91 91 91 91 91 91 91 90 91 91 90 90 90 90 91 90 90 90 91 91 91 91 Refer to Page iv for description of Rapid Select. 167 Part No. SF-3524 SF-5112 SF-5114 SF-5116 SF-5118 SF-5120 SF-5122 SF-5124• SF-5126 SF-5128• SF-5130 SF-5132 SF-5134 SF-5212 SF-5214 SF-5216 SF-5218 SF-5220 SF-5222 SF-5224 SF-5226 SF-5228 SF-5230 SF-5232 SF-5314 SF-5316 SF-5318 SF-5320 SF-5322 SF-5324 SF-5326 SF-5328 SF-5330 SF-5332 SF-5334 SF-5412 SF-5414 SF-5416 SF-5418 SF-5420 SF-5422 SF-5424 SF-5426 SF-5514• SF-5516 SF-5518• SF-5520 SF-5522 SF-5524• SF-5526 SF-5528 SF-5532 SF-5534 SF-6118 SF-6120 SF-6122 Page No. 91 109 109 109 109 109 109 109 109 109 109 109 109 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 110 109 109 109 109 109 109 109 109 110 110 110 110 110 110 110 110 110 110 129 129 129 Part No. SF-6124 SF-6126 SF-6128 SF-6320 SF-6324 SF-6326 SF-6328 SF-6330 SF-6418 SF-6424• SF-6520 SF-6522 SF-6524• SF-6526 SF-8MM11• SF-8MM13• SF-8MM23• SF-9MM13 SF-HC-3816 SF-HE-9518 SF-SH-335 SF-SH-336 SF-SW-282 SH-335 SH-335-D SH-336 SH-336-D SH-338 SH-338-D SH-339 SH-339-D SH-400 SH-401 SH-402 SH-404 SH-406 SH-412 SH-413 SH-414 SH-57 SH-57-3 SH-57-4 SH-575 SH-57-6 SH-57-8 SH-59 SH-59-3 SH-59-4 SH-59-6 SH-629 SH-629P SH-629-3 SH-629-4 SH-629-5 SH-629-6 SH-629-P• •Denotes a Rapid Select item. 168 Page No. 129 129 129 130 130 130 130 139 129 129 130 130 130 130 82 98 99 98 90 110 110 110 110 105 105 105 105 105 105 105 105 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 151 Part No. Page No. SH-913 SJ-241 SJ-349 SJ-350 SJ-351 SJ-352 SJ-360 SJ-361 SJ-362 SJ-363 SJ-364 SJ-365 SJ-375 SJ-379 SJ-380 SJ-55 SJ-66 SJ-67 SJ-68 SJ-935-1/2 SJ-935-1/4• SJ-93510MXM6• SJ-93512MXM6 SJ-93512MXM8• SJ-93514MXM10• SJ-935-3/8 FS SJ-935-5/16 SJ-935-7/16 SPL-132 SPL-134 SPL-136 SPL-138 SPL-140 SPL-142 SPL-144 SPL-146 SPL-148 SPL-150 SPL-152 SPL-154 SPL-156 SPL-158 SPL-160 SPL-162 SPL-166 SPL-168 SPL-170 SPL-174 SPL-176 SPL-178 SPL-180 SPL-182 151 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 160 152 152 152 152 152 152 152 152 152 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 155 Part No. SPL-184 SPL-186 SPL-188 SW-282 SW-282-D SW-343 SW-343-D SW-350 SW-493 SW-493-D SW-604 SW-604-D SW-605 SW-605-D SW-90 SW-90-B SW-911-BP SW-911-P SW-984 SWSC-911-C SZ-10• SZ-100 SZ-100-A SZ-101 SZ-10-14MM SZ-10-17MM SZ-101-A SZ-102 SZ-102-A SZ-104 SZ-10-A• SZ-11• SZ-11-A• SZ-11-A-3 SZ-12• SZ-12-A• SZ-12-A-2 SZ-12-A-3 SZ-12-A-6 SZ-13• SZ-13-A• SZ-13-A-3 SZ-14• SZ-14-17MM SZ-14-19MM SZ-14-22MM SZ-14-24MM SZ-14-27MM SZ-14-A• SZ-14-A-3 SZ-14-A-4 SZ-15• SZ-15-A• SZ-15-A-2 SZ-15-A-3 SZ-15-A-4 Page No. 155 155 155 105 105 86 86 151 107 107 86 85 86 86 151 151 57 57 151 57 95 39 39 39 124 124 39 39 39 39 95 95 95 37 95 95 37 37 37 95 95 37 95 40 40 40 40 40 115 37 37 95 115 37 37 37 Part No. Page No. SZ-16• 95 SZ-16-A• 115 SZ-16-A-3 37 SZ-16-A-4 37 SZ-17 38 SZ-17-A 115 SZ-18 38 SZ-18-A 115 SZ-19 38 SZ-19-A 115 SZ-20• 38 SZ-21• 38 SZ-22• 115 SZ-23• 115 SZ-24• 115 SZ-25 115 SZ-26 115 SZ-27 38 SZ-30 39 SZ-30-A 39 SZ-31 39 SZ-31-A• 115 SZ-32 39 SZ-32-A 115 SZ-33 39 SZ-33-A 39 SZ-34 39 SZ-34-A 39 SZ-35 39 SZ-35-A 39 SZ-36 39 SZ-36-A 39 SZ-37 39 SZ-3-7-10MM 40 SZ-3-7-4MM 40 SZ-3-7-5MM 40 SZ-3-7-6MM 40 SZ-3-7-8MM 40 SZ-37-A 39 SZ-38 39 SZ-38-A 39 SZ-39 39 SZ-39-A 39 SZ-40• 38 SZ-41• 38 SZ-42• 115 SZ-43 115 SZ-44 115 SZ-5-10-14MM124 SZ-5-10-17MM124 SZ-5-10-19MM 40 SZ-5-7-10MM 124 SZ-5-7-12MM 124 SZ-5-7-14MM 124 SZ-5-7-3MM 40 SZ-5-7-4MM 40 Refer to Page iv for description of Rapid Select. Part No. Page No. SZ-5-7-5MM 40 SZ-5-7-6MM 40 SZ-5-7-8MM 124 SZ-7 38 SZ-7-10-10MM 40 SZ-7-10-12MM 40 SZ-7-10-14MM 40 SZ-7-10-17MM 40 SZ-7-10MM 124 SZ-7-12MM 124 SZ-7-14MM 124 SZ-7-3MM 40 SZ-7-4MM 101 SZ-7-5MM 101 SZ-7-6MM• 101 SZ-7-8MM 124 SZ-7-A 37 SZ-80 39 SZ-8-14-17MM 40 SZ-8-14-19MM 40 SZ-8-14-22MM 40 SZ-8-14-24MM 40 SZ-8-14-27MM 40 SZ-82 39 SZ-83 39 SZ-84 39 SZ-85 39 SZ-85-A 39 SZ-86 39 SZ-87 39 SZ-88 39 SZ-89 39 SZ-8L-TX-70 24 SZ-9 38 SZ-91 39 SZ-9-A 37 SZ-TX-100 24 SZ-TX-100-A 20 SZ-TX-55-A• 20 SZ-TX-60-A 20 SZ-TX-70-A 20 SZ-TX-70-A-3 20 SZ-TX-80-A 20 SZ-TX-90-A 20 T• 16 T-320• 17 T-321 18 T-328 17 TH-250 67 TH-252 67 TH-254 67 TH-256 67 TH-257 157 TH-370 67 TH-372 67 TH-376 67 Part No. TH-377 TH-378 TH-501 TH-502 TM-20 TM-24• TN-20 TN-24 TW-1 TW-10 TW-11 TW-12 TW-13 TW-14 TW-15 TW-2 TW-3• TW-4• TW-5• TW-5-ACR TW-6 TW-7 TW-8 TW-9 TWA-4 TWA-5 TWA-6 TWA-7 TWA-8 TWB-6 TWB-7 TWB-8 TWD-1 TWD-2• TWD-3• TWD-4• TWD-4-ACR TWD-5• TWD-5-ACR TWD-6• TWD-7 TWE-4 TWE-5 TX-1104 TX-1105 TX-1106 TX-1108• TX-1110 TX-1112 TX-1404• TX-1405• TX-1406• TX-1407 TX-1408• TX-1410 TX-1411 Page No. 157 157 157 157 157 157 157 157 46 47 47 47 47 47 47 46 46 46 46 47 47 47 47 47 47 47 47 47 47 46 46 46 46 46 46 46 46 46 46 46 46 46 46 84 84 84 84 84 84 84 84 84 84 84 84 84 Part No. Page No. TX-1412 TX-1E04 TX-1E05 TX-1E06 TX-1E08 TX-1E10 TX-1E12 TX-3106 TX-3107• TX-3108• TX-3110• TX-3112• TX-3114 TX-3116 TX-3406 TX-3407• TX-3408• TX-3410• TX-3412• TX-3414 TX-3416 TX-3508• TX-3E08 TX-3E10 TX-3E12 TX-3E14 TX-3E16 TX-5110 TX-5112• TX-5114• TX-5116 TX-5118• TX-5120 TX-5124 TX-5408 TX-5410• TX-5412• TX-5414 TX-5416 TX-5418 TX-5420 U U-321 W W-321 WJ-265-1/2 WJ-265-1/4 WJ-265-1/8 WJ-265-13/64 WJ-265-17/32 WJ-265-3/16 WJ-265-3/8 WJ-265-5/16 WJ-265-5/32 WJ-265-7/16 WJ-265-9/64 84 84 84 84 84 84 84 102 102 102 102 102 102 102 102 102 102 102 102 102 102 102 103 103 103 103 103 125 125 125 125 125 125 125 125 125 125 125 125 125 125 16 18 16 18 154 154 154 154 154 154 154 154 154 154 154 Part No. Page No. WJ-284-1/4• WJ-284-1/8 WJ-284-13/32 WJ-284-3/16 WJ-284-3/8 WJ-284-5/16 WJ-284-5/32 WJ-284-7/64 WJ-284-9/64 X-1108 X-1110 Y Y-321 YK-250 YK-251 YK-252 YK-370 YK-371 YK-372 YK-500 YK-501 YK-502 ZA-110 ZA-112 ZA-310 ZA-312 ZA-314• ZA-510 ZA-512 ZA-514 ZE-112 ZE-312 ZE-314 ZE-512 ZE-514 ZN-112 ZN-114 ZN-312 ZN-314 ZN-512 ZN-514 154 154 154 154 154 154 154 154 154 77 77 16 18 157 157 157 157 157 157 157 157 157 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 153 Screwdriver Bit Quotation Worksheet For quotation only. Not an order. Name Title Company Address Phone Style FAX Point Size Style Point Size ❏ Phillips ❏ Frearson/Reed Prince ❏ Phillips ACR® ❏ Socket Head ❏ Sloted ❏ Socket/Robertson ❏ Torx® ❏ Torx-Set® ❏ Torx Plus® ❏ Triple Square ❏ Pozidriv® ❏ Tri-Wing ❏ Other Drive Type Size DIMENSIONS ❏ Hex Insert ❏ Hex Power ❏ Threaded ❏ Female Square ❏ Other A. Overall Length B. Body Diameter C. Turned Length Quantity APPLIED or DRIVING TORQUE Additional Specifications Fill out and Fax to your Apex representative. 169 Sockets Quotation Worksheet For quotation only. Not an order. Name Title Company Address Phone FAX Socket Type ❏ Type A (tapered) ❏ Type B (straight) Broach Opening ❏ Type C (shouldered) DIMENSIONS ❏ Hex ❏ Fast Lead ❏ Double Hex ❏ Surface Drive ❏ Square ❏ Torx® ❏ Double Square ❏ Other Magnetic A. Square drive B. Drive end diameter ❏ Magnetic Bolt Clearance (MB) ❏ Magnetic Bolt Clearance, with retaining ring (RMB) ❏ Strip Magnet (SM) ❏ Fixed Magnet (M) ❏ Non-magnetic Drive Configuration ❏ DIN Standard C. Overall length D. Taper or shoulder length E. Bolt clearance depth F. Broach depth G. Nose end diameter H. Broach opening ❏ No DIN groove ❏ Cross Hole (one wall only) I. Torx® size Quantity APPLIED or DRIVING TORQUE Additional Specifications 170 Fill out and Fax to your Apex representative. Universal Wrench Quotation Worksheet For quotation only. Not an order. Name Title Company Address Phone FAX DIMENSIONS ❏ Female square drive, standard type Square Drive size ❏ Female square drive, tension type Square Drive size ❏ Male hex drive, standard type Hex Drive size ❏ Male hex drive, tension type Hex Drive size ❏ Female square drive, (short) B. Socket length C. Socket diameter* D. Socket nose dia. G. Depth of Clearance L. Shank length M. Overall length Square Drive size *Standard diameters are 5/8”, 3/4”, 7/8”, 1”, 11/4”, 1 1/2”, 1 3/4”, 2” BROACH OPENING STYLE & SIZE Hex Male square Double Hex { ❏ Pin lock ❏ Ball lock ❏ Hole Quantity APPLIED or DRIVING TORQUE Additional Specifications Fill out and Fax to your Apex representative. For assistance, please call your Apex representative. Universal wrenches are not recommended for impact applications. Maximum operating angle 30°. 171 Conversion Chart Inch, Fractions Inch, Fraction Inch, Decimal 1/64 1/32 .0156 .0313 .0394 .0469 .0625 .0781 .0787 .0938 .1094 .1181 .1250 .1406 .1563 .1575 .1719 .1875 .1969 .2031 .2188 .2344 .2362 .2500 .2656 .2756 .2813 .2969 .3125 .3150 .3281 .3438 .3543 .3594 .3750 .3906 .3937 .4063 .4219 .4331 .4375 .4531 .4688 .4724 3/64 1/16 5/64 3/32 7/64 1/8 9/64 5/32 11/64 3/16 13/64 7/32 15/64 1/4 17/64 9/32 19/64 5/16 21/64 11/32 23/64 3/8 25/64 13/32 27/64 7/16 29/64 15/32 172 Millimeters 0.3969 0.7938 1.000 1.1906 1.5875 1.9844 2.0000 2.3813 2.7781 3.0000 3.1750 3.5719 3.9688 4.0000 4.3656 4.7625 5.0000 5.1594 5.5563 5.9531 6.0000 6.3500 6.7469 7.0000 7.1438 7.5406 7.9375 8.0000 8.3344 8.7313 9.0000 9.1281 9.5250 9.9219 10.0000 10.3188 10.7156 11.0000 11.1125 11.5094 11.9063 12.0000 Inch, Decimals Inch, Fraction Inch, Decimal 31/64 1/2 .4844 .5000 .5118 .5156 .5313 .5469 .5512 .5625 .5781 .5906 .5938 .6094 .6250 .6299 .6406 .6563 .6693 .6719 .6875 .7031 .7087 .7188 .7344 .7480 .7500 .7656 .7813 .7874 .7969 .8125 .8268 .8281 .8438 .8594 .8661 .8750 .8906 .9055 .9063 .9219 .9375 33/64 17/32 35/64 9/16 37/64 19/32 39/64 5/8 41/64 21/32 43/64 11/16 45/64 23/32 47/64 3/4 49/64 25/32 51/64 13/16 53/64 27/32 55/64 7/8 57/64 29/32 59/64 15/16 Millimeters Millimeters 12.3031 12.7000 13.0000 13.0969 13.4938 13.8906 14.0000 14.2875 14.6844 15.0000 15.0813 15.4781 15.8750 16.0000 16.2719 16.6688 17.0000 17.0656 17.4625 17.8594 18.0000 18.2563 18.6531 19.0000 19.0500 19.4469 19.8438 20.0000 20.2406 20.6375 21.0000 21.0344 21.4313 21.8281 22.0000 22.2250 22.6219 23.0000 23.0188 23.4156 23.8125 Inch, Fraction 61/64 31/32 63/64 1 1 1/32 1 1/16 1 3/32 1 1/18 1 5/32 1 3/16 1 7/32 1 1/4 1 9/32 1 5/16 1 11/32 1 3/8 1 13/32 1 7/16 1 15/32 1 1/2 1 17/32 1 9/16 1 19/32 Inch, Decimal .9449 .9531 .9688 .9843 .9844 1.0000 1.0237 1.0313 1.0625 1.0630 1.0938 1.1024 1.1250 1.1418 1.1563 1.1812 1.1875 1.2188 1.2205 1.2500 1.2599 1.2813 1.2993 1.3125 1.3386 1.3438 1.3750 1.3780 1.4063 1.4174 1.4375 1.4568 1.4688 1.4961 1.5000 1.5313 1.5355 1.5625 1.5749 1.5938 1.6143 Millimeters 24.0000 24.2094 24.6063 25.0000 25.0031 25.4000 26.0000 26.1938 26.9875 27.0000 27.7813 28.0000 28.5750 29.0000 29.3688 30.0000 30.1625 30.9563 31.0000 31.7500 32.0000 32.5438 33.0000 33.3375 34.0000 34.1313 34.9250 35.0000 35.7188 36.0000 36.5125 37.0000 37.3063 38.0000 38.1000 38.8938 39.0000 39.6875 40.0000 40.4813 41.0000 Inch, Fraction 1 5/8 1 21/32 1 11/16 1 23/32 1 3/4 1 25/32 1 13/16 1 27/32 1 7/8 1 29/32 1 15/16 1 31/32 2 2 1/32 2 1/16 2 3/32 2 1/8 2 5/32 2 3/16 2 7/32 2 1/4 2 9/32 2 5/16 Inch, Decimal 1.6250 1.6536 1.6563 1.6875 1.6930 1.7188 1.7324 1.7500 1.7717 1.7813 1.8111 1.8125 1.8438 1.8505 1.8750 1.8898 1.9063 1.9292 1.9375 1.9686 1.9688 2.0000 2.0080 2.0313 2.0473 2.0625 2.0867 2.0938 2.1250 2.1261 2.1563 2.1654 2.1875 2.2048 2.2188 2.2442 2.2500 2.2813 2.2835 2.3125 2.3228 Millimeters 41.2750 42.0000 42.0688 42.8625 43.0000 43.6563 44.0000 44.4500 45.0000 45.2438 46.0000 46.0375 46.8313 47.0000 47.6250 48.0000 48.4188 49.0000 49.2125 50.0000 50.0063 50.8000 51.0000 51.5938 52.0000 52.3875 53.0000 53.1813 53.9750 54.0000 54.7688 55.0000 55.5625 56.0000 56.3575 57.0000 57.1500 57.9450 58.0000 58.7375 59.0000 www.coopertools.com CooperTools Is On The Web! CooperTools is pleased to unveil a complete resource for power tools on-line. www.coopertools.com offers product information, service literature, brand catalogs, press releases and more. A dominant source of information, the CooperTools’ web site is your source for application solutions on-line. Making your job easier is our goal! You can access service literature anytime. Choose a category such as Assembly Tools or Material Removal Tools from the main menu and then click on the brand you’re looking for. You’ll be on your way to any current service literature you need, whether it’s Apex, Master Power, Cleco, or any of our power tools’ brands. Up-to-date product catalogs are also available online providing you with current information on our broad product line. Even Material Safety Data Sheets (M.S.D.S.) for Safety and Disposal Information are available on our website. It’s simple! Our Customer Service section provides you with information such as answers to frequently asked questions or contact phone numbers and addresses for your area of the country. You can learn more about CooperTools in the About Us section or browse through the What’s New information to learn how CooperTools continues to be your source for solutions. For even faster searches, you can go direct to a brand site by simply entering the brand name. Entering www.apex-tools.com takes you directly to the brand site. What is the future of www.coopertools.com? A dynamic site continuing to focus on your need for up-to-date information on the latest CooperTools’ offerings that you can access anytime you need...twenty-four hours a day, seven days a week! AIRETOOL® APEX® • BUCKEYE® CAMPBELL® • CLECO® COOPER AUTOMATION™ • CRESCENT® DGD® • DOLER® • DOTCO® • EREM® GARDNER-DENVER® • GARDOTRANS™ GETA™ • KAHNETICS® • LUFKIN® MASTER POWER® • METRONIX™ NICHOLSON® •PLUMB® • H.K. PORTER® QUACKENBUSH™ • RECOULES™• ROTOR™ UTICA® • WELLER® • WIRE-WRAP® WISS® • XCELITE® Apex Operation P.O. Box 952 Dayton, OH 45401-0952 Phone: (937) 222-7871 Fax: (937) 228-0422 www.cooperindustries.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. GARDNER-DENVER IS A REGISTERED TRADEMARK OF GARDNER-DENVER MACHINERY, INC., USED UNDER LICENSE. © 2001 COOPER INDUSTRIES, INC. DECEMBER 2001 TC-100 1201 30M W
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2002:02:07 10:46:19Z Modify Date : 2012:11:19 11:25:17+05:30 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 4.05 for Macintosh Metadata Date : 2012:11:19 11:25:17+05:30 Format : application/pdf Title : Apex Fastener Tools Catalog (English) Document ID : uuid:e58a0168-6dc4-4a30-a901-1171d9a392a2 Instance ID : uuid:2404c621-5811-4d33-bcf1-1782fdd6ec9a Page Count : 182EXIF Metadata provided by EXIF.tools