IEEE Std 952 1997, Standard Specification Format Guide And Pro Cedure For Single Axis Interferometric Fiber Optic Gyro 1998
User Manual:
Open the PDF directly: View PDF
Page Count: 83
- Title Page
- Introduction
- Participants
- CONTENTS
- 1. Overview
- 2. References
- Part I—Specification format
- 3. Definitions
- 4. Applicable documents
- 5. Requirements
- 6. Quality assurance provisions
- 7. Preparation for delivery
- 8. Notes
- Part II—Test procedures
- 9. Test procedure overview
- 10. Description
- 11. Test conditions and equipment
- 12. Test procedures
- 12.1 Examination of product—Mechanical
- 12.2 Examination of product—Electrical
- 12.3 Leak test
- 12.4 Input power
- 12.5 Turn-on time
- 12.6 Warm-up time
- 12.7 Polarity
- 12.8 Operating temperature test series
- 12.9 Gyro scale factor test series
- 12.10 Input rate limits
- 12.11 Drift rate test series
- 12.12 1A alignment
- 12.13 Generated fields
- 12.14 Environment test series
- Annex A—Design features of IFOGs
- Annex B—Dynamic and stochastic modeling overview
- Annex C—An overview of the Allan variance method of IFOG noise analysis
- Annex D—Compliance matrix