NTSC Sec_10/327 352 2001 Catalog Pages 327

User Manual: 2001 Catalog - Pages 327-352

Open the PDF directly: View PDF PDF.
Page Count: 26

OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
–327–
SECTION 10 OTHER VIDEO EQUIPMENT AND ACCESSORIES
1. Peripheral equipment .......................................328
2. Batteries and chargers.....................................333
3. AC Adaptor........................................................338
4. System consoles...............................................341
5. Connecting cables............................................342
6. Videocassette tape
6-1 Batacam SP Videocassette Tapes................347
6-2 DVCAM Videocassette Tapes .......................348
6-3 S-VHS Videocassette Tapes .........................350
7. Memory stick™ .................................................351
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
–328–
VCS-1000
Video Selector
•For use in combination with the SVRM-960 Bi-directional
remote controller for high quality picture monitoring
•Minimizes the signal reflections caused by long cable runs
•Up to 20 SVO-965 units equipped with the SVBK-902
optional Bi-directional interface board can be connected to a
single VCS-1000 •Loop-through output is provided for
connection
of up to 50 VCS-1000 units •19-inch EIA rack
mountable in various directions •On-Line indicator •When
the power is turned off, the LINE OUT becomes a loop-
through output of the LINE IN for easy maintenance
Supplied accessories:
Mounting brackets
(EIA 2U width ç2, DIA 3U width ç2)
AC power cord
Operation manual
Specifications
General
Mass: Approx. 4 kg (8 lb 13 oz)
Dimensions: 424 (W) ç88 (H) ç132 (D) mm
(163/4ç31/2ç51/4inches)
Power requirements: AC 120V, 50/ 60Hz
Power consumption: 8.5W max.
Maximum number of VTR connection:
20 units
Video
Video signal system: EIA monochrome, NTSC color
Frequency response: 6MHz, 100kHz reference
S/N ratio: More than 54dB
Audio
Frequency response: 20Hz to 20kHz, 1kHz ≈10dBu standard
S/N ratio: More than 85dB
RF video
Frequency response: 6MHz
S/N ratio: More than 54dB
Video inputs/outputs
Video in (from SVO-965):
BNC (ç20), 1Vp-p, sync negative, 37.5Ω, unbalanced
Line in video (from previous VCS-1000):
BNC, 1Vp-p, sync negative, 75Ω, unbalanced
Line out video (to SVRM-960 or next VCS-1000):
BNC, 1Vp-p, sync negative, 75Ω, unbalanced
Control inputs/outputs
Control input (from SVO-965):
BNC (ç20)
Rx*1 input: 1Vp-p, 37.5Ω, unbalanced
Tx*2 output: 1.4Vp-p, 37.5Ω, unbalanced
Line in control (from previous VCS-1000):
BNC
Tx intput: 1Vp-p, 37.5Ω, unbalanced
Rx output: 1Vp-p, 37.5Ω, unbalanced
Line out control (to SVRM-960 or next VCS-1000):
BNC
Tx input: 1Vp-p, 37.5Ω, unbalanced
Rx output: 1Vp-p, 37.5Ω, unbalanced
RF
RF IN (from the SVO-965):
BNC (ç20), 1Vp-p, 37.5Ω, unbalanced
Line IN RF (from previous VCS-1000):
BNC, 1Vp-p, 75Ω, unbalanced
Line Out RF (to SVRM-960 or next VCS-1000):
BNC, 1Vp-p, 75Ω, unbalanced
Audio inputs/outputs
Audio Input (from SVO-965)
:
Phono
(2-channel ç20),high i
mpedance,
unbalanced
Line In audio (from previous VCS-1000):
Phono (2-channel), high impedance, unbalanced
Line Out audio (to SVRM-960 or next VCS-1000):
Phono (2-channel), high impedance, unbalanced
*1: Rx: Signal output from the SVRM-960
*2: Tx: Signal output from the SVO-965
1 Peripheral equipment
1 Peripheral equipment
–329–
VCS-63A
Video and Audio Selector
•A video and Audio (stereo) Signal can be
selected from the six video and audio
sources.
•Equipped with the loop-through out
connectors for each input signal.
•When two or more selectors are
connected
in parallel, using the loop-through
capability, a camera or VTR signal can be
selected independently.
•Can be mounted into a 19-inch EIA
standard rack using the supplied rack
mount adaptor.
Dimensions:
Approx. 424(W) ç44(H) ç170(D)mm
(163/4ç13/4ç63/4inches)
Mass: Approx. 3kg (6 lb 10 oz)
Connectors:
VIDEO IN/OUT—BNC type
AUDIO IN/OUT—PHONO
Supplied accessories:
Rack mount adaptor (ç2)
Screw for rack mounting (ç4)
SRP-12DAR
RGB Distribution Unit
•Provides AV applications including PC
cost effective and high performance analog
RGB distribution •One analog RGB signal
is distributed into two signals and monitor
signal(total three) •Monitor signal is routed
through the D-sub 15p connector to
monitor display •Wide frequency response
of up to 250 MHz(BNC output) •Compact
and durable enclosure is available
Inputs
Connector: BNC (x5)
RGB level: 0.7 Vp-p
RGB impedance:
75 Ω
Hs/Cs level: 1 V-4 Vp-p
Hs/Cs impedance:
47 kΩ
Hs/Cs sync: Positive/negative
Vs level: 1 V-4 Vp-p
Vs impedance:
47 kΩ
Outputs 1, 2
Connector: BNC (x5)
RGB level: 0.7 Vp-p
Hs/Cs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance
Vs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance
Monitor out
Connector: D-sub 15p
RGB level: 0.7 Vp-p
Hs/Cs level: 1 Vp-p /75 Ω, 4 Vp-p/high
impedance
Vs level: 1 Vp-p/75 Ω, 4 Vp-p/high impedance
Electoric characteristics
RGB bandwidth
Output 1, 2: 40 Hz to 250 MHz+3/-3 dB
Monitor out: 40 Hz to 200 MHz+3/-3 dB
Gain difference between RGBs:
0.2 dB
Delay between RGBs:
Less than 1 ns
General
Power requirements: Power plug converter for
120 V
Power consumption: 4 W
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
ON
OFF
75Ω
IN - 1
ON
OFF
75Ω
IN - 2
ON
OFF
75Ω
IN - 3
ON
OFF
75Ω
IN - 4
ON
OFF
75Ω
IN - 5
ON
OFF
75Ω
IN - 6 OUT
R
L
IN - 1 IN - 2 IN - 3 IN - 4 IN - 5 IN - 6 OUT
SRP-200DA
AV Distribution Amplifier
•Can distribute an AV input signal in
five ways •The 75Ωterminator of the
video input is automatically
disconnected when a cable is connected
to the stacking terminal. Up to four
units can be connected in parallel
•Can be mounted into a 19-inch EIA
standard rack
General
Dimensions: 482(W) ×44(H) ×175(D)mm
(19 ×13/4×7 inches)
Mass: 2.5kg (5 lb 8 oz)
Power requirements:
AC 120V, 230V, 50Hz/60Hz
Power consumption:
5W
Operating temperature:
0 to 40°C (32 to 104°F)
Storage temperature:
-20 to +60°C (-4 to +140°F)
Video
Frequency responce:
100 kHz to 10 MHz, -0.5dB
DG: Less than 0.5%
DP: Less than 0.4°
Input: 75Ω/high impedance
(high impedance at stacking output)
BNC connector ×1
Outputs: 75Ω, BNC connector ×5
(high impedance at stacking output)
Audio
Frequency response:
20Hz to 20kHz
Harmonic distortion:
Less than 0.005%
Inputs (one stereo)
Reference level:
-10dBu
Max. level: +10dBu
Impedance: 47kΩ
Type: Phono jack (stereo x5)
Circuit: Unbalanced
Outputs (five stereo)
Reference level:
-10dBu
Max. level: +10dBu
Impedance: 47Ω
Type: Phono jack
Circuit: Unbalanced
1 Peripheral equipment
–330–
VCS-500
Video and audio switcher with
blanking switch facility
•The system using the VCS-500 can
operate synchronically with the external
sync or the video signal connected to the
VIDEO IN-1 connector. The signal can be
switched in the blanking portion so that
switching noise is eliminated
•Up to five video and audio signals can be
controlled
•Remote control is possible when an
RM-V5 VTR selector is used
•DUB circuit switching function
•
Can be mounted into 19-inch EIA standard rack
Inputs: Video—1Vp-p of rating, 75Ω,
unbalanced, sync negative
Sync—3V ±1Vp-p, 75Ω,
unbalanced, negative
Audio—LINE IN CH-1/CH-2,
≈5dB of rating, 47kΩ
Outputs: Video—Rated input ±0.2Vp-p,
75Ω, unbalanced, sync negative
Sync—3V ±1Vp-p, 75Ω,
unbalanced, negative
Audio—LINE OUT CH-1/CH-2,
rated input ±2dB, 47kΩ
Frequency response:
Video ±1dB (up to 6MHz)
Audio 50 to 15,000Hz ±1dB
Connectors: VIDEO IN/OUT—BNC
SYNC IN/OUT—BNC
AUDIO IN/OUT—Phono
REMOTE IN/OUT—20-pin
DUB IN/OUT—7-pin
Power requirements:
AC 100/110/120/127/220/240V
±10% (selectable), 50/60Hz
Power consumption:
20W
Dimensions: 480 (W) ç87 (H) ç280 (D) mm
(19 ç31/2ç111/8inches)
Mass: 7 kg (15 lb 7 oz)
Supplied accessories:
AC power cord
Screw for rack mounting
DA-1400
Video/audio distributor
•Two video/audio inputs and fourteen
distribution outputs •Four distribution
patterns are available: Input signal A (1 to
14 ch), Input signal B (1 to 14 ch), Input
signal A (1 to 7 ch)/Input signal B (8 to 14
ch), Input signal B (1 to 7 ch)/Input signal A
(8 to 14 ch) •
Loop-through output connector
for each input signal to expand the
connection with other DA-1400s
•Video/audio level meters for adjusting and
confirming the output signal levels •Audio
input level selector (≈10dB/-6dB) •19-inch
EIA standard rack mountable
Supplied accessories: AC power cord
Mounting brackets
(EIA 2U width: 1 pair)
Operation manual
General
Mass: 6 kg (13 lb 23 oz)
Dimensions: 424 (W) ç88 (H) ç350 (D) mm
(163/4ç31/2ç137/8inches)
Power requirements:
AC 120V, 50/60Hz
Power consumption:
16W
Video
Inputs: Loop-through, BNC (ç2), 1Vp-p,
75Ω, sync negative
Outputs: BNC (ç14), 1Vp-p, 75Ω, sync
negative
S/N ratio: Better than 60dB
Frequency response:
10MHz ± 1dB
Audio
Inputs: Loop-through, Phono (2-channel)
(ç2)
Input level: ≈10dBu/≈6dBu
switchable, 50kΩ
Outputs: Phono (2-channel) (ç14)
Output level: ≈10dBu/≈6dBu,
100Ω
S/N ratio: Better than 70dB at 600Ω
Frequency response:
20Hz to 20kHz ±1dB
Distortion: Less than 0.1%, ≈10dBu at 1kHz
DA-500
Color and monochrome
video/audio distributor with DUB
connectors
•Five Video/DUB/Audio outputs and one
direct output
•DUB connectors are furnished so that a
high quality video signal will be obtained
•Up to four DA-500s can be connected in
series so that the input signal can be
divided into as many as 20 separate signals
•Can be mounted into 19-inch EIA standard
rack
Inputs: Video—1Vp-p of rating, 75Ω,
unbalanced, sync negative
Audio—LINE CH-1/CH-2, ≈5dB
of rating, 47kΩ, unbalanced
Outputs: Video—OUT 1 to 5, Rated input
±0.2Vp-p, 75Ω, unbalanced,
sync negative
Audio—LINE CH-1/CH-2, Rated
input ±2dB, 47kΩ
Connectors: VIDEO IN/OUT, DIRECT OUT—
BNC
AUDIO IN/OUT, DIRECT OUT—
Phono
Power requirements:
AC 100/110/120/127/220/240V
±10% (selectable), 50/60Hz
Power consumption:
20W
Dimensions: 480 (W) ç87 (H) ç280 (D) mm
(19 ç31/2ç111/8inches)
Mass: 6.1 kg (13 lb 7 oz)
Supplied accessories:
AC power cord
Screw for rack mounting
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
≥ AC IN
OUT
LINE
VIDEO
CH1/L
CH2/R
DUB
SYNC OUT
IN - 1
LINE
VIDEO
CH1/L
CH2/R
DUB
SYNC OUT
IN - 2
LINE
VIDEO
CH1/L
CH2/R
DUB
SYNC OUT
IN - 3
LINE
VIDEO
CH1/L
CH2/R
SYNC OUT
IN - 4
LINE
VIDEO
CH1/L
CH2/R
SYNC OUT
IN - 5
LINE
VIDEO
CH1/L
CH2/R
SYNC OUT
GROUP
SELECT
SYNC IN
IN OUT
REMOTE
OUT
≥ AC IN
DUB
CH1/L
CH2/R
DIRECT-OUT
LINEDUB
CH1/L
CH2/R
OUT - 1
LINEDUB
CH1/L
CH2/R
OUT - 2
LINEDUB
CH1/L
CH2/R
OUT - 3
LINEDUB
CH1/L
CH2/R
OUT - 4
LINEDUB
CH1/L
CH2/R
OUT - 5
LINE
VIDEO
CH1/L
CH2/R
VIDEO VIDEO VIDEO VIDEO VIDEO VIDEO
DUB LINE
–331–
VA-200E
Cable compensator for stable
color/monochrome video
transmission
•Compensates for the attenuation caused
by long-distance transmission of
color/monochrome video signals with a
coaxial cable
•Especially effective for the transmission of
color video signals
Length adjustments
Video input: 1.0Vp-p to 1.4Vp-p 75Ω,
unbalanced
Video output: 1Vp-p, 75Ω, unbalanced
Frequency response:
Flat to 4.5MHz ±2dB
Operating temperature:
0 to 40°C (32 to 104°F)
Connectors: VIDEO IN/OUT—UHF (M-type)
Power requirements:
AC 110 to 130/220 to 240V
selectable, 50/60Hz
Power consumption:
6W
Dimensions: 214 (W) ç75 (H) ç171 (D) mm
(81/2ç3 ç63/4inches)
Mass: 1.4 kg (3 lb 4 oz)
Supplied accessory:
AC power cord
PVS-1680S
Matrix Switcher
•Sixteen inputs and eight outputs matrix functions
•RS-232C interface port for remote control
from a PC •Reference video input and
roop-through output •Memory function up to
50-scene •Equipped with a LOCK SWITCH
to prevent inadvertent operation •4U high,
mountable in 19-inch standard rack
Supplied accessory: Power cable (1)
Audio
Input and output connector: Phono
Number of input ch: 16 (stereo)
Impedance: 47 kΩ
Reference(Max.) input level: -10 dBu (+16 dBu)
Input impedance: 47 kΩ
Number of output ch: 8 (stereo)
Impedance: 470 Ω
Reference(Max.) output level: -10 dBu (+16 dBu)
Output impedance: 470 Ω
Load impedance: More than 10 kΩ
Frequency response: 20 Hz to 20 kHz,
+0.1 dB/ -0.5 dB
T.H.D.: Less than 0.005%
Video (Composite)
Input and output connector: BNC
Number of input ch: 16
Number of output ch: 8
Input and output impedance: 75 Ω
Frequency response: 60 HZ to 10 MHz
+0.8 dB/-1 dB
DG: Less than 0.5%
DP: Less than 0.5°
S-Video
Input and output connector: 4-pin mini DIN
Number of input and output: 4*
*Interlocked with channels to 1 to 4 of composite input
Input and output impedance: 75 Ω
Frequency response: 60 Hz to 10 MHz
General
Power requirements: AC 230 V, 50/60 Hz
Power consumption: 25 W
Operating temperature: 0 to 40°C (32 to 10°F)
Storage temperature: -20 to 60°C (-4 to 140°F)
Mass: 13 kg( 22 lb 1 oz )
Dimensions: 482 (W) ×176 (H) ×350 (D) mm
(19 ×7 ×137⁄8inches)
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
1 Peripheral equipment
3C-2V 5C-2V 7C-2V 10C-2V
1 180m 300m 370m 500m
2 360m 600m 750m 1000m
3 540m 900m 1100m 1500m
4 720m 1200m 1500m 2000m
PVS-1240S
Matrix Switcher
•Twelve inputs and four outputs matrix
functions •RS-232C interface port for
remote control from a PC •Reference video
input and loop-through output •Memory
function up to 50-scene •Equipped with a
LOCK SWITCH to prevent inadvertent
operation •4U high, mountable in 19-inch
standard rack
Supplied accessories: Power cable (1),
Plug adaptor (1)
Audio
Inputs and output connector:
Phono
Number of input ch: 12 (stereo)
Impedance: 47 kΩ
Reference(Max.) input level:
-10 dBu (+16 dBu)
Input impedance: 47 kΩ
Number of output ch: 4 (stereo)
Impedance: 470 Ω
Reference(Max.) output level:
-10 dBu (+16 dBu)
Output impedance: 470 Ω
Load impedance: More than 10 kΩ
Frequency response: 20 Hz to 20 kHz,
+0 dB/ -0.5 dB
T.H.D.: Less than 0.002%
Video (Composite)
Inputs and output connector:
BNC
Number of input ch: 12
Number of output ch: 4
Input and output impedance:
75 Ω
Frequency response: 60 Hz to 10 MHz,
+0.8 dB / -0.5 dB
DG: Less than 0.5%
DP: Less than 0.5°
S-Video
Input and output connector:
4-pin mini DIN
Number of input and output ch :
4*
*Interlocked with ch1 to 4 of composite input
Input and output impedance:
75 Ω
Frequency response: 60 Hz to 10 MHz
General
Power requirements: AC 120/230 V, 50/60 Hz
Power consumption: 18 W
Operating temperature: 0 to 40°C (32 to 10°F)
Storage temperature: -20 to 60°C (-4 to 140°F)
Mass: 10 kg (22 lb 1 oz)
Dimensions: 482 (W) ×176 (H) ×350 (D)mm
(19 ×14 ×13 7⁄8inches)
–332–
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
1 Peripheral equipment
PVS-880S
Matrix Switcher
•Eight inputs and eight outputs matrix
functions •RS-232C interface port for
remote control from a personal computer
•Reference video input •Memory function
•Equipped with a LOCK SWITCH to
prevent inadvertent operation •Can be
mounted in a 19-inch EIA standard rack
Supplied accessory: Power cable (1)
Audio
Input and output connector:
Phono
Number of input ch: 8 (stereo)
Impedance: 47 Ω
Reference (max.) input level:
-10 dBu (+16 dBu)
Input impedance: 47 Ω
Number of output ch : 8 (stereo)
Impedance: 470 Ω
Reference (max.) output level:
-10 dBu (+16 dBu)
Output impedance: 470 Ω
Load impedance: More than 10 kΩ
Frequency response: 20 Hz to 20 kHz
+0.1/-0.5dB
T.H.D.: Less than 0.005%
Video (Composite)
Input and output connector:
BNC
Number of input ch: 8
Number of output ch: 8
Input and output impedance:
75 Ω
Frequency response: 60 Hz to 10 MHz
+0.8 dB/-0.5dB
DG: Less than 0.5%
DP: Less than 0.5°
S-Video
Input and output connector:
4-pin mini-DIN
Number of input and output ch:
4*
*Interlocked with ch 1 to 4 of composite input
Input and output impedance:
75 Ω
Frequency response: 60 Hz to 10 MHz
±0.5 dB
*Except for North America
General
Power requirements: AC 120–230V, 50/60Hz
Power consumption: 17W
Operating temperature:
0 to 40°C (32 to 104°F)
Storage temperature: –20 to 60°C (–4 to 140°F)
Mass: 10kg (22 lb 1 oz)
Dimensions: 482(W) ×132(H) ×350(D)mm
(19 ×51/4×137/8inches)
PVS-820S
Matrix Switcher
•Eight inputs and two outputs matrix
functions •Reference video input •Equipped
with a LOCK SWITCH to prevent
inadvertent operation •Can be mounted in a
19-inch EIA standard rack
Supplied accessory: Power cable (1)
Audio
Input and output connector:
Phono
Number of input ch: 8 (stereo)
Impedance: 75 Ω
Reference (max.) input level:
-10 dBu (+10 dBu)
Input impedance: 47 Ω
Number of output ch: 2 (stereo)
Impedance: 470 Ω
Reference (max.) output level:
-10 dBu (+10 dBu)
Output impedance: 470 Ω
Load impedance: More than 10 kΩ
Frequency response: 20 Hz to 20 kHz
+0.1/-0.5dB
T.H.D.: Less than 0.005%
Video (Composite)
Input and output connector:
BNC
Number of input ch: 8
Number of output ch: 2
Input and output impedance:
75 Ω
Frequency response: 60 Hz to 10 MHz
+0.3 dB/-1dB
DG: Less than 0.5%
DP: Less than 0.5°
S-Video
Input and output connector:
4-pin mini-DIN
Number of input ch: 4*
Number of output ch: 2
*Interlocked with ch 1 to 4 of composite input
Input and output impedance:
75 Ω
Frequency response: 60 Hz to 10 MHz
+0.3/-1dB
*Except for North America
General
Power requirements: AC 120V–230V, 50/60Hz
Power consumption: 17W
Operating temperature
: 0 to 40°C (32 to 10°F)
Storage temperature: –20 to 60°C (–4 to 140°F)
Mass: 4kg (8 lb 13 oz)
Dimensions: 482(W) ×88(H) ×220(D)mm
(19 ×3 1/2×8 3/4inches)
–333–
BC-1WD
Battery charger for NP-1B
•Battery charger for the NP-1B battery pack
•Up to four NP-1B batteries can be charged
•Auto refresh function •Battery life
indication •Skips charging process for fully
charged batteries
Power requirements:
AC 120 V ±10%, 50/60 Hz
Power consumption:
51 W
Charging time: Approx. 90min
Dimensions: 107.5 (W) ×88 (H) ×325 (D)
mm (41/4×31/2×127/8inches)
Mass: Approx. 1.7 kg (3 lb 5 oz)
BC-410
Battery charger for BP-90A/NP-1B
•Battery charger for BP-90A and NP-1B
•Up to four BP-90As and four NP-1Bs can
be charged •Battery refreshing function
•Trickle charge to avoid self-discharge
Power requirements:
AC 100/120V selectable, 50/60Hz
Power consumption:
75W
Charging time:
BP-90A: 160 min
NP-1B: 90 min
Dimensions:
212 (W) ×85 (H) ×325 (D) mm
(41/2×33/8×127/8inches)
Mass: 4 kg (8 lb 13 oz)
Supplied accessories:
AC power cord
Operation/maintenance manual
BC-L50
Lithium-ion Battery Charger
•Compact and mobile battery charger
which can be used with Lithium-ion battery
packs •Up to two Lithium-ion batteries
attached •Use a unique new time-saving
charging system for quick charges
Power requirements:
AC 120 V, 60 Hz
Output: DC 16.8 V, 2.2 A
Power consumption:
Approx. 49 W
Operating temperature:
-5° C to 45° C (23° F to 113° F)
Storage temperature:
-20° C to 60° C (-4° F to 140° F)
Operating/storage humidity:
5 to 90 % RH
Mass: 1.1 kg (2 lb 6 oz)
Dimensions (w/h/d):
60 ×191 ×130 mm
(2 3⁄8×7 5⁄8×5 1⁄8inches)
(w/o projections)
Charge system:
Constant voltage and current
charge system with timer stop
system
Charge control system:
Constant voltage and current
chargecontrol system
Booster charge current:
Approx. 2.2 A
BC-L100
Battery charger for BP-L60A
BP-L90A/NP-1B/BP-90A
•Battery charger for BP-L60A/BP-L90A/
NP-1B/BP-90A batteries •Up to four BP-
L60A, BP-L90A, NP-1B or BP-90A can be
charged
Power requirements:
AC100V to 240V, 60Hz
Power consumption:
110W
Charging time:
BP-L60A: Approx. 2.5 hours
BP-L90A: Approx. 3.5 hours
NP-1B: Approx. 70 min
Dimensions: 330 (W) ×131 (H) ×144 (D) mm
(13 ×51/4×53/4inhes)
Mass: Approx. 2 kg (4 lb 7 oz)
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
2 Batteries and chargers
–334–
BC-V500
Battery charger
•Compact battery chager for the
NP-F530/F730/F930, etc. •Two batteries
can be charged at the same time
Dimensions: 45(W) ×98(H) ×50(D) mm
Mass: Approx. 120 g
Power requirements:
AC100 to 240V, 50/60Hz
Output: DC 8.4V/0.6A
BKW-L601
Battery adaptor for between
DSR-1, PVV-3 and
BP-L60A/BP-L90A
•Can be attached to the optional battery
case of the DSR-1 DVCAM recorder and
the PVV-3 Betacam SP 2000 PRO
recorder •Allows the DSR-1 and the PVV-3
to be operated with BP-L60A and BP-L90A
Dimensions: 89 (W) ×141.4 (H) ×14.2 (D) mm
(35/8×55/8×9/16 inches)
Mass: 110 g (4 oz)
DC-520
Battery adaptor for NP-1B
•Can be attached to the supplied battery
case of the DSR-1, PVV-3 Betacam
SP 2000PRO recorder UVW-100B
•Allows the DSR-1, PVV-3 and UVW-100B
to be operated with two NP-1B batteries
•Supplies DC 12V to the DSR-1, PVV-3
and UVW-100B
Dimensions: 100 (W) ×195 (H) ×44 (D) mm
(4 ×73/4×13/4inches)
Mass: 230 g (8 oz)
Supplied accessories:
Screws (M3 ×6)
DC-500 (Mount type)
Battery case for BP-90A
•Battery case for one BP-90A battery
•Designed for the DSR-1, PVV-3 and
UVW-100B
•Supplies DC 12V
Dimensions: 147 (W) ×207 (H) ×62 (D) mm
(57/8×81/4×21/2inches)
Mass: 400 g (14 oz)
Supplied accessories:
Screws (M3 ×5)
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
2 Batteries and chargers
–335–
DC-210 (waist belt type)
Battery case for BP-90A
•Battery case for one BP-90A battery pack
•Supplies DC 12V to Sony video equipment
Dimensions: 145 (W) ×180 (H) ×85 (D) mm
(53/4×71/8×33/8inches)
Mass: 500 g (1 lb 2 oz)
Supplied accessories:
Power cord (1.2m) (×1)
Belt
DC-L1
Battery Case for NP-1B
•Battery Case for a NP-1B battery to be
used with the camcorders/portable editors
which incorporates the V-shoe attachment
•Quick and easy battery change
Specifications
Dimensions: 101(W) ×196.2(H) ×54.8(D) mm
(4 ×73⁄4×21⁄4inches)
Mass: 300g (11 oz)
DC-L90
Battery Case for BP-90A
•Battery Case for a BP-90A battery to be
used with the camcorders/portable editors
which incorporates the V-shoe attachment
•Quick and easy battery change
Specifications
Dimensions: 138(W) ×203.6(H) ×76.6(D) mm
(51⁄2×81⁄8×31⁄8inches)
Mass: 620g (1 lb 6 oz)
BP-L40
Lithium-ion Battery
•Compact Lithium-ion battery for
professional Sony camcorders, which is
designed to match the body height of the
DSR-300
Battery type:
Lithium-ion battery
Maximum voltage:
16.8 V DC
Nominal voltage:
14.4 V DC
Capacity: 38.9 Wh
Dimensions (w/h/d):
92 ×138 ×37 mm
(3 5⁄8×5 1⁄2×1 1⁄2inches)
Mass: Approx. 520 g (1 lb 1 oz)
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
2 Batteries and chargers
–336–
BP-L60A
Rechargeable Lithium Ion
Battery Pack
•High capacity lithium-ion battery •No
“Memory Effect” •Built-in LED capacity
indicator for a quick visual check of the
remaining charge •V-shoe attachment for
quick and easy battery change
Specifications
Type of battery: Lithium-ion rechargeable
Maximum voltage:16.8V
Nominal voltage: 14.4V
Current capacity: 60Wh
Cell capacity: 5.4Ah
Operating temperature:
–20°C to +45°C (–4°F to
+113°F)
Dimensions: 101(W) ç168.7(H) ç37(D) mm
(4 ç63⁄4ç11⁄2inches)
Mass: 900g (1 lb 16 oz)
BP-L90A
Rechargeable Lithium Ion
Battery Pack
•High capacity lithium-ion battery •No
“Memory Effect” •Built-in LED capacity
indicator for a quick visual check of the
remaining charge •V-shoe attachment for
quick and easy battery change
Specifications
Type of battery: Lithium-ion rechargeable
Maximum voltage:16.8V
Nominal voltage: 14.4V
Current capacity: 90Wh
Cell capacity: 8.1Ah
Operating temperature:
–20°C to +45°C (–4°F to
+113°F)
Dimensions: 101(W) ç 168.7(H) ç 60(D) mm
(4 ç63⁄4ç23⁄8inches)
Mass: 1300g (2 lb 14 oz)
BP-90A
Rechargeable battery pack
•Supplies DC 12V to DSR-1, PVV-3,
UVW-100B, PVM-8045Q/8042Q/5041Q,
TU-1040E
Type of battery: NiCd rechargeable
Voltage: DC 12V
Current capacity: 5Ah
Dimensions: 123 (W) ×171 (H) ×37 (D) mm
(47/8×63/4×11/2inches)
Mass: 1.6 kg (31 lb 8 oz)
NP-1B
Rechargeable battery pack
•Supplies DC 12V to DSR-1, PVV-3,
UVW-100B, VO-8800, DXC-D30/D30WS/
327B, PVM-8045Q/8042Q/5041Q,
TU-1040E, EVM-9010PR/1410PR
Battery used: NiCd battery
Output voltage: DC 12V
Capacity: 2.3 Ah
Dimensions: Approx.
72 (W) ×25 (H) ×185 (D) mm
(27/8×1 ×73/8inches)
Mass: Approx. 600 g (1 lb 5 oz)
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
2 Batteries and chargers
–337–
NP-F220/B
InfoLITHIUM Rechargeable
Battery Pack
Maximum voltage:
8.4 V DC
Capacity: 1400mAh
Dimensions (w/h/d):
82 ×20 ×54 mm
(3 1⁄4×13⁄16 ×2 1⁄4inches)
Mass: Approx. 100 g (3 oz)
NP-F950
InfoLITHIUM Rechargeable
Battery Pack
Maximum voltage:
7.2 V DC
Capacity: 4050mAh
Dimensions: 38.4(W) ×59.7(H) ×70.8(D) mm
Mass: Approx. 280 g
NPA-10000/B
Three-battery Holder
*Can hold three NP-F950 InfoLITHIUM
Rechargeable Battery Pack
Power requirements:
7.2 VDC
Dimensions (w/h/d):
95 ×132 ×81mm
(3 3⁄4×5 1⁄4×3 1⁄4inches)
Mass: Approx. 220 g
NP-F550 (F530)
InfoLITHIUM Rechargeable
Battery Pack
•Can be used for the DKC-CM30
Voltage: 7.2V
Capacity: 1500 mAh (1350 mAh)
Dimensions (W ×H ×D):
38.4 ×20.6 ×70.8 mm
(1 9⁄16 ×13⁄16 ×2 7⁄8inches)
Mass: Approx. 95 g (110 g)
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
2 Batteries and chargers
3 AC adaptor
–338–
AC-550
AC Adaptor
•Supplies DC power to the one-piece
camcorder and a portable VTR through the
26-pin (CCZ-type) camera connector or the
XLR 4-pin DC OUT connector
Supplied accessories:
AC power cord
DC power cord
Operation and
Maintenance manual
Power requirements:
AC 110 to 120V/220 to
240V ±10%
selectable, 60Hz
Power consumption: Max 130W
DC output: 13.5V, 7A
Input/Output connectors:
CAMERA: CCZ-type 26-pin
VIDEO OUT: BNC type
MIC OUT: Equivalent to
XLR-3-31
DC OUT: Equivalent to
XLR-4-31
EXT VBS: BNC type
Dimensions: 217 (W) ×91 (H) ×327 (D) mm
(85/8×35/8×127/8inches)
Mass: 3.8 kg (8 lb 6 oz)
CMA-8A
AC Adaptor
•Supplies AC power to the one-piece camcorder
and portable VTR through the 14-pin(CCQ-
BRS) camera connector
Power requirements :
AC 110 to 127V or 220 to 240V
selectable, 50/60Hz
Power consumption :
95W
Dimensions: 105(W) ×105 (H) ×308 (D) mm
(4 1⁄4×4 1⁄4×12 1⁄4inches)
Mass: Approx. 2.8 kg (6 lb 2.8 oz)
AC-DN1
AC Adaptor
Power requirements:
AC 100V to 240V
Power consumption:
50W (90VA) or less
Power output (DC):
38W
Voltage output (DC):
16.7V
Mass: 660g
Demensions: 112(W) ×169(H) ×38(D)mm
Charging time:
BP-L60A 4hr. (to about 85% capacity)
BP-L90A 6hr. (to about 85% capacity)
Supplied accessories:
DC power cord (1)
BKW-L601/1 (1)
AC-DN2A
AC Adaptor
Power requirements: AC 100V to 240V
Power consumption: 180W
Power output (DC): 150W
Voltage output (DC): 16.7V
Mass: 1kg
Demensions: 112(W) ×169(H) ×70(D)mm
Charging time: BP-L60A 4hr. (to about 85%
capacity) BP-L90A 6hr. (to about 85%
capacity)
Supplied accessories: DC power cord (1)
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
3 AC adaptor
–339–
AC-V100/B
AC adaptor/battery charger
*Battery charger for InfoLITHIUM battery
such as NP-F220/B and AC adoptor
Power requirement:
AC 100V to 240V, 50/60Hz
Power consumption:
25 W
Dimensions (w/h/d):
57 ×44 ×107 mm
(2 1⁄4×1 6⁄8×4 1⁄4inches)
Mass: Approx. 190 g (6 oz)
AC-V900/B
Three-battery charger/AC
adaptor
*Battery charger which can hold three-
battery such as NP-F950/B and AC adoptor
Power requirement:
AC 100V to 240V, 50/60Hz
Power consumption:
70W
Dimensions (w/h/d):
169(W) ×58(H) ×153(D) mm
Mass: Approx. 650 g
AC-VQ800
AC Adaptor/Charger
•AC adaptor for Lithium-ion type camcorder
•Battery charger for Lithium-ion batteries:
InfoLITHIUM L series (NP-F550/750/950) and
InfoLITHIUM M series(consumer)
Specifications:
Power requirment:
AC 100 V to 240 V, 50 Hz/60 Hz
VTR mode: DC 8.4 V/2.0 A
Charge mode: DC 8.4 V/1.4 A
Dimensions: 136.0(W) ×51.5(H) ×89.7(D) mm
(5 3⁄8×2 1⁄8×3 5⁄8inches)
Mass: Approx. 250 g (0.6 lb)
Supplied accessories:
Connectign cable DK-415 (DC plate type)
DK-215 (DC IN type)
AC power cord (mains lead)
DC-VQ800
DC Adaptor/Charger
•Car battery adaptor for Lithium-ion type camcorder
•Battery charger for Lithium-ion batteries:
InfoLITHIUM L series (NP-F550/750/950) and
InfoLITHIUM M series(consumer)
Specifications
Power requirement:
DC 12 V/24 V
VTR mode: DC 8.4 V/2.0 A
Charge mode: DC 8.4 V/1.4 A
Dimensions: 136.0(W) ×51.5(H) ×89.7(D) mm
(5 3⁄8×2 1⁄8×3 5⁄8inches)
Mass: Approx. 300 g (0.7 lb)
Supplied accessories:
Connectign cable DK-415 (DC plate type)
DK-215 (DC IN type)
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
3 AC adaptor
–340–
AC-V700
AC Adaptor/Charger
•AC adaptor for Lithium-ion type camcorder
•Battery charger for Lithium-ion batteries:
InfoLITHIUM L series (NP-F550/750/950) and
NP-F100/200/220
Specifications:
Power requirement:
AC 100 V to 240 V, 50 Hz/60 Hz
VTR mode: DC 8.4 V/2.0 A
Charge mode: DC 8.4 V/1.4 A
Dimensions: 127.0(W) ×54.8(H) ×95.0(D) mm
(5 ×2 1⁄4×3 3⁄4inches)
Mass: Approx. 265 g (0.6 lb)
Supplied accessories:
Connectign cable DK-415 (DC plate type)
AC power cord (mains lead)
DC-V700
DC Adaptor/Charger
•Car battery adaptor for Lithium-ion type camcorder
•Battery charger for Lithium-ion batteries:
InfoLITHIUM L series (NP-F550/750/950) and
NP-F100/200/220
Specifications
Power requirement:
DC 12 V/24 V
VTR mode: DC 8.4 V/2.0 A
Charge mode: DC 8.4 V/1.4 A
Dimensions: 127.0(W) ×54.8(H) ×95.0(D) mm
(5 ×2 1⁄4×3 3⁄4inches)
Mass: Approx. 265 g (0.6 lb)
Supplied accessory:
Connectign cable DK-415 (DC plate type)
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
–341–
4 System consoles
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
Basic Consoles
System consoles
SU-450 Double size table for RM-450/
DME-450
SU-511 Unit rack
SU-512 Unit table
SU-513 Extension rack
SU-514 Extension table
SU-515 Double size table for RM-440
Rack mount metals
RMM-450 For RM-450/DME-450
mounting
RMM-501 For VO-9850/9800Type-5/9
series VTR mounting
RMM-502 For RM-500 or RM-V5
mounting
RMM-503 For RM-580 mounting
RMM-505 For RM-500 (ç2), RM-V5 (ç2)
or RM-500/RM-V5
mounting
RMM-506 For Betamax or audio
equipment mounting
RMM-507 For Type-7/9 series VTR
mounting (except
VO-9850/9800)
RMM-980 For EVO-9800/9850 mounting
Blank panels
BLP-501 1U Blank panel
BLP-502 2U Blank panel
BLP-503 3U Blank panel
BLP-504 1U Pad panel
BLP-505 2U Pad panel
BLP-506 6U Modification panel
BLP-507 Blank panel
SU-511
SU-514
SU-513
SU-511
SU-513
SU-514
2044 (885⁄8)
1010
(397⁄8)
890 (351⁄8)
1050 (413⁄8)
SU-511
SU-512
1010
(397⁄8)
1050 (413⁄8)
526 (203⁄4)
Unit: mm (inch)
Weight: Approx. 37.2kg (82 lb) without VTR
Weight: Approx. 116.7kg (257 lb 4 oz)
Unit: mm (inch)
BLP-507
CT-501
12
A
A
SU-515/450
B
B
5 Connecting cables
–342–
CCA-7 cables (10-pin/10-pin)
CCA-7-5 : 5m (16.5 ft)
CCA-7-25 : 25m (82 ft)
CCA-7-50 : 50m (165 ft)
CCA-7-100 : 100m (330 ft)
•10-pin (male) g10-pin (female)
•RM-M7G gDXC-D30/300/327B
series
•RM-M7G gCCU-M7/M5
•RM-M7G gCA-325A/325B
CCDD-2.5 (4-pin/4-pin)
•4-pin (male) g4-pin (female), 2.5 m
(8.2 ft)
•SEG-2000A series gCRK-2000
CCMC cables (12-pin/12-pin)
CCMC-12P02 : 2m (6.4 ft)
CCMC-12P05 : 5m (16.4 ft)
CCMC-12P10 : 10m (33 ft)
CCMC-12P25 : 25m (82 ft)
•12-pin (male) g 12-pin (female)
•DXC-LS1/107A/950/9000/390 g
CMA-D2
CCDC cables (12-pin/4-pin)
CCDC-5 : 5m (16.4 ft)
CCDC-10 : 10m (33 ft)
CCDC-25 : 25m (82 ft)
•12-pin (female) g4-pin (male)
•DXC-LS1/107A/950/9000/390 g
CMA-D2
CCDQ-06 (14-pin/4-pin)
•14-pin (male) g4-pin(male),0.6 m
(2 ft)
CCMC-16P03/10
(16-pin/20-pin)
CCMC-16P03 : 3m (10 ft)
CCMC-16P10 : 10m (33 ft)
•16-pin (female) g20-pin (female),
10m (33 ft)
•DXC-LS1 Camera Head gDXC-LS1
Camera Control Unit
CCDC-A cables (12-pin/4-pin)
CCDC-50A : 50m (164 ft)
CCDC-100A : 100m (330 ft)
•12-pin (female) g4-pin (male)
•DXC-LS1/107A/950/9000/390 g
CMA-D2
CCF cables (6-pin/6-pin)
CCF-1 : 1m (3.3 ft)
CCF-5 : 5m (16.4 ft)
CCF-10 : 10m (33 ft)
CCF-25 : 25m (82 ft)
CCF-50 : 50m (164 ft)
•6-pin (male) g6-pin (female)
•SEG-2000A/2550A gWEX-2000
CCMC-9DS
(9-pin/4BNCs, DIN 4-pin)
•9-pin D-sub (male) gBNCs (R/G/B/
SYNC, male), DIN 4-pin (Y/C, male)
•5m (16.4 ft)
•For video output from DXC-950/
9000/390
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
–343–
CCTQ-3RGB (20-pin/14-pin)
•DXC-950/9000 gCCU-M5, 3m (10 ft)
•It is possible to extend the cable
length with CCQ-AM cable
•CCQQ-1 interconnection adaptor is
supplied
•RGB/VBS output to CCU-M5
CCQ-AM cables
(14-pin/14-pin)
CCQ-10AM : 10m (33 ft)
CCQ-25AM : 25m (82.5 ft)
CCQ-50AM : 50m (165 ft)
CCQ-100AM : 100m (330 ft)
•14-pin (male) g14-pin (female)
•CA-327 gCCU-M5
CCXC-9DBS (9-pin/5BNCs)
•9-pin D-sub (male) gBNCs (R/G/B/
SYNC/VBS) (male)
•5m (16.4 ft)
•For video output from DXC-H10/950/
9000/390
CCTZ-3RGB (20-pin/26-pin)
•DXC-950/9000 gCCU-M5, 3m (10 ft)
•CCZZ-1E interconnection adaptor is
supplied
•It is possible to extend the cable
length with CCZ-AM cable
•RGB/VBS output to CCU-M5
CCQ-BRS cables
(14-pin/14-pin)
CCQ-2BRS : 2m (6.4 ft)
CCQ-5BRS : 5m (16.4 ft)
CCQ-10BRS : 10m (33 ft)
CCQ-25BRS : 25m (82.5 ft) only for projector
CCQ-50BRS : 50m (165 ft) only for projector
•14-pin (male) g14-pin (female)
•DXC-D30/D30WS/327B g
VO-8800/CMA-8A, S-VHS VTR
•VPH-G90U/G70Q/G70VRU/D50Q g
PC1271
CCZ-A cables (26-pin/26-pin)
CCZ-A2 : 2m (6.5 ft)
CCZ-A5 : 5m (16.5 ft)
CCZ-A10 : 10m (33 ft)
CCZ-A25 : 25m (82 ft)
CCZ-A50 : 50m (164 ft)
CCZ-A100 : 100m (330 ft)
•26-pin (male) g26-pin (female)
•DXC-D30/D30WS/327B series g
CCU-M7/M5
•UVW-100B gBVW-50
•DXC-H10 gCMA-H10
CCTZ-3YC (20-pin/26-pin)
•DXC-950/9000 gCCU-M5, 3m (10 ft)
•CCZZ-1E interconnection adaptor is
supplied
•It is possible to extend the cable
length with CCZ-AM cable
•YC/VBS output to CCU-M5
CCQX-3 (14-pin/XLR 4-pin)
•14-pin (male) gXLR 4-pin (female),
3m (10 ft)
•For external DC input to DSR-
300/UVW-100B, CA-537/327 from
CMA-8A
CCZQ-A cables (14-pin/26-pin)
CCZQ-A2 : 2m (6.6 ft)
CCZQ-A5 : 5m (16.5 ft)
CCZQ-A10 : 10m (33 ft)
•14-pin (male) g26-pin (female)
•CA-537, DSR-300/UVW-100B gVO-
8800, S-VHS VTR
•CA-537 gCMA-8A
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
5 Connecting cables
–344–
RCC-A cables (15-pin/15-pin)
RCC-5A : 5 m (16 ft)
RCC-11A : 10 m (33 ft)
•15-pin (male) g15-pin (female)
•BVE-600 gMXP-290
•BVE-910 (with BKE-916A) gMXP-290
RCC-15FT (33-pin/33-pin)
Remote control extension cable
•33-pin (male) g33-pin (female), 15 m
(49.2 ft)
•RM-440/450/500/550/580 g
All Type-5/7/9 VTRs, EVO-9800A/9850
SYC cables (4-pin/4-pin)
SYC-2 : 2 m (6.4 ft)
SYC-5 : 5 m (16.4 ft)
•Mini DIN 4-pin (male) gMini DIN
4-pin (female)
•PVW/UVW series VTRs
•DSR series VTR
•SVO-5800/9600, SVP-5600/9000
•SVT-S3100
RCC-5AA cable (9-pin/15-pin)
Audio mixer control cable
•
9-pin (male) g15-pin (female),5m(16ft)
•PVE-500 gMXP-290
RCC-G cables (9-pin/9-pin)
RCC-5G : 5 m (16 ft)
RCC-10G : 10 m (33 ft)
RCC-30G : 30 m (99 ft)
•9-pin (male) g9-pin (male)
•PVW-2800/2650/2600, UVW-1800/
1600, DSR-2000/85/80/70/60/40,
SVO-5800, SVP-5600 g9-pin
equipped Sony machines
UGC cables (BNC/BNC)
UGC-1 : 1m (3.3 ft)
UGC-2 : 2m (6.4 ft)
UGC-5 : 5m (16.4 ft)
UGC-10 : 10m (33 ft)
•BNC (male) gBNC (male), 3C-2V
RCC-5F (33-pin/33-pin)
Remote control cable
•33-pin (male) g33-pin (female), 5m
(16.4 ft)
•RM-450/500/555/580 g
All Type-5/7/9 VTRs, EVO-9800A/9850
SIC-M cables (14-pin/14-pin)
SIC-M1 : 1m (3.3ft)
SIC-M5 : 5m (16.4ft)
SIC-M15 : 15m (49ft)
SIC-M25 : 25m (82ft)
SIC-M50 : 50m (164ft)
•14-pin (male) g14-pin (female)
•VPH-G90U/G70Q/G70VRU/D50Q g
PC-1271
VDC-5A (7-pin/7-pin)
Dubbing cable
•7-pin (male) g7-pin (female), 5 m
(16.4 ft)
•VTRs with gVTRs with
DUB
connector
DUB connector
VCS-500
DA-500
•DA-500 gDA-500
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
5 Connecting cables
–345–
VDC-C5 (12-pin/12-pin)
Dubbing cable
•12-pin/12-pin, 5 m (16 ft)
•PVW series VTRs
•UVW-1800/1600
VMC i.LINK cables
(4-pin/4-pin)
VMC-IL4415: 1.5 m(5 ft)
VMC-IL4435: 3.5 m(12 ft)
(4-pin/6-pin)
VMC-IL4615: 1.5 m(5 ft)
VMC-IL4635: 3.5 m(12 ft)
(6-pin/6-pin)
VMC-IL6615: 1.5 m(5 ft)
VMC-IL6635: 3.5 m(12 ft)
•DVCAM series
VK-310A/318A/320A(4-pin/4-pin)
VK-310A : 10m (33 ft)
VK-318A : 18m (59 ft)
VK-320A : 20m (65.6 ft)
•4-pin (male) g4-pin (male)
•SSC-530AM gSSM-721AMR
VMC cables (8-pin/8-pin)
VMC-3P : 3m (10 ft)
VMC-5P : 5m (16.4 ft)
VMC-10P : 10m (33 ft)
•8-pin (male) g8-pin (male)
•VTR gMonitor
TV tuner
•TV tuner gprojector
VK-110A/120A (4-pin/4-pin)
VK-110A : 10m (33 ft)
VK-120A : 20m (65.6 ft)
•4-pin (male) g4-pin (male)
•SSC-530AM gSSM-721AMR
VMC-1MQ (14-pin/8-pin)
•14-pin (male) g8-pin (male),1.5m (5 ft)
•VO-6800/8800 gMonitor
TV tuner
VK-305 (4-pin/4-pin)
•4-pin (male)
g
4-pin
(female)
,5m
(16.4 ft)
•Water-resistant extention cable
•SSC-530AM gSSM-721AMR
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
5 Connecting cables
Audio connecting cords
RK-5XLRF: XLR-3-11C type (female)—phono, 5m
RK-5XLRM: XLR-3-12C type (male)—phono, 5m
RK-5XLRF
–346–
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
5 Connecting cables
Cable connections
VTR
Camera control unit
Camera AC adaptor
VO-8800
or S-VHS VTR
CCU-M7
CCU-M5
CMA-8A
CMA-D7
CMA-D2
CMA-H10
DXC-D30/D30WS/
327B with CA-537
DXC-D30/D30WS/
327B with CA-327 DXC-9000 DXC-950 DXC-107A DXC-H10
CCQZ-A
CCZ-A
CCQZ-A
CCZQ-A/
CCQX-3
----
----
----
----
----
----
----
----
----
----
----
----
CCTZ-3RGB/3YC+
CCZ-A or
CCTQ-3RGB+
CCQ-AM
---- ----
----
CCMC-12P/UGC
----
---- ----
---- ----
---- ----CCQ-BRS
CCQ-AM
CCQ-BRS/
CCQX-3
----
CCTZ-3RGB/3YC+
CCZ-A or
CCTQ-3RGB+
CCQ-AM
CCDC/CCMC-12P
----
----
CCDC/CCMC-12P
----
CCDC/CCMC-12P
----
----
CCZ-A
Video camera
–347–
6-1 Betacam SP Videocassette Tapes
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
BCT MA Series
Metal Videocassette Tapes
BCT-5MA/10MA/20MA/30MA (Small cassettes)
BCT-5MLA/10MLA/20MLA/30MLA/60MLA/90MLA
(Large cassettes)
Tape length Playing time Mass*
Model m (feet) (min) g (lb.)
BCT-5MA 42 (138) 6 231 (0.51)
BCT-10MA 78 (256) 12 241 (0.53)
BCT-20MA 150 (492) 24 256 (0.56)
BCT-30MA 222 (728) 36 276 (0.61)
BCT-5MLA 58 (190) 9 625 (1.38)
BCT-10MLA 93 (305) 15 63 (1.39)
BCT-20MLA 172 (564) 29 650 (1.43)
BCT-30MLA 243 (797) 39 660 (1.45)
BCT-60MLA 457 (1,499) 75 730 (1.61)
BCT-90MLA 670 (2,198) 110 790 (1.74)
*with case
•For Betacam SP 2000PRO VTRs
•Offers high C/N, low head-wear, reduced drop-outs and
outstanding durability
UVWT Series
Metal Videocassette Tapes
UVWT-10MA/20MA/30MA (Small cassettes)
UVWT-60MLA/90MLA (Large cassettes)
Tape length Playing time Mass*
Model m (feet) (min) g (lb.)
UVWT-10MA 78 (256) 12 241 (0.53)
UVWT-20MA 150 (492) 24 256 (0.56)
UVWT-30MA 222 (728) 36 276 (0.61)
UVWT-60MLA 457 (1,499) 75 730 (1.61)
UVWT-90MLA 670 (2,198) 110 790 (1.74)
*With case
•For Betacam SP UVW series VTRs
•Offers high quality and outstanding durability
–348–
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
6-2 DVCAM Videocassette Tape
PDV-MEM Series
Digital Videocassette Tapes
(Master Tape)
PDVM-32MEM/40MEM (Mini size)
PDV-64MEM/124MEM/184MEM (Standard size)
Tape length
Recording/Playing
Mass*
Model m (feet) time (min) g (lb.)
PDVM-32MEM 58 (190) 32 63 (0.139)
PDVM-40MEM 71 (233) 40 64 (0.141)
PDV-64MEM 112 (367) 64 128 (0.282)
PDV-124MEM 214 (702) 124 135 (0.298)
PDV-184MEM 315 (1,033) 184 142 (0.313)
*With case
•For DVCAM DSR series VTRs
•Offers high output, lower noise, higher C/N characteristics
and extremely low error rates due to Hyper Evaticle II
Magnetic Partcles
•Ensures superior quality even at a four times high-speed
transfer mode
•Built-in 16 kbit IC memory
PDV-ME Series
Digital Videocassette Tapes
PDVM-12ME/22ME/32ME/40ME (Mini size)
PDV-34ME/64ME/94ME/124ME/184ME (Standard size)
Tape length
Recording/Playing
Mass*
Model m (feet) time (min) g (lb.)
PDVM-12ME 24 (79) 12 61 (0.134)
PDVM-22ME 41 (135) 22 62 (0.137)
PDVM-32ME 58 (190) 32 63 (0.139)
PDVM-40ME 71 (233) 40 64 (0.141)
PDV-34ME 61 (200) 34 124 (0.273)
PDV-64ME 112 (367) 64 128 (0.282)
PDV-94ME 163 (535) 94 132 (0.291)
PDV-124ME 214 (702) 124 135 (0.298)
PDV-184ME 315 (1,033) 184 142 (0.313)
*With case
•For DVCAM DSR series VTRs
•High output and high reliability due to pure cobalt advanced
evaporated coating with DLC (Diamond Like Carbon)
protective layer
•Built-in 16 kbit IC memory
–349–
6-2 DVCAM Videocassette Tape
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
PDV-N Series
Digital Videocassette Tapes
(Non IC type)
PDVM-32N/40N (Mini size)
PDV-64N/124N/184N (Standard size)
Tape length
Recording/Playing
Mass*
Model m (feet) time (min) g (lb.)
PDVM-32N 58 (190) 32 63 (0.139)
PDVM-40N 71 (233) 40 64 (0.141)
PDV-64N 112 (367) 64 128 (0.282)
PDV-124N 214 (702) 124 135 (0.298)
PDV-184N 315 (1,033) 184 142 (0.313)
*With case
•For DVCAM DSR Series VTRs
•High output and high reliability due to pure cobalt advanced
evaporated coating with DLC (Diamond Like Carbon) protective layer
•Without IC Memory
PDV-12CL/PDVM-12CL
Video Head Cleaning Cassette
(for DVCAM)
•For DVCAM DSR Series VTRs
–350–
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
6-3 S-VHS Videocassette Tapes
ST Series S-VHS Videocassette Tapes
•Metal particle tape for S-VHS recording
•Anti-static lid to protect the tape from dirt and dust particles for
low dropouts
•S-VHS mode recording can be activated via the detection holes
on the back of the cassette
•Rugged, pro-type album case
Playing time* Tape length Mass*
Model name (min) m (ft) g (lb.)
ST-30 30 64 (210) 345 (0.76)
ST-60 60 125 (410) 360 (0.79)
ST-120 120 246 (807) 390 (0.86)
* Playing time = SP mode
**with case
–351–
7 Memory Stick™
MSA-4A/8A
Memory Stick
•IC memory media which is designed for the coming
generation after tape and disk. •Record and store still
images and other data •Transfer the data to other products
easily without cables •Compact and removable •Need no
mechanism •Quick access •Simple 10-pin connection
Specifications
IC memory type: Flash memory
Storage capacity: 4MB/8MB
Connector type: 10-pin connector
Clock speed: Max. 20 MHz
Write speed: Max. 1.50 MB/s
Read out speed: Max. 2.45 MB/s
Power source: 2.7 V to 3.6 V
Power consumption (average):
Approx. 45 mA
Power consumption (standby):
Approx. 130 µA
Dimensions: Approx. 21.5(W) ×50(H) ×2.8(D) mm
(7⁄8×2 ×1⁄8inches)
Mass: Approx. 4 g
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES
–352–
OTHER VIDEO
EQUIPMENT AND
ACCESSORIES

Navigation menu