340379ENEU Automatic Lubrication Pumps MSA Series B
User Manual: MSA Series
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
Automatic Lubrication Pumps A Complete Family of Air, Electric and Hydraulic Grease and Oil Pumps PROVEN QUALITY. LEADING TECHNOLOGY. Pumps for Any Application The Ultimate in Centralized Lubrication Pumps From your smallest jobs to your largest machines, Graco pumps are at the heart of any centralized lubrication system. Add a wide variety of quality metering devices, controllers and accessories to get a complete system for nearly any performance, input power or mounting requirement. [ With Graco you can be sure every piece of equipment in your plant gets the right amount of lubrication where and when it needs it. ] With Graco automatic lubrication systems you get: • Increased productivity—longer machine life and reduced downtime • Reduced operating costs—reduced repair labor and component costs • More efficient lubrication—small, carefully controlled amounts when needed Graco Automatic Lubrication Systems apply the correct amount of lubrication in the right place at the right time Manual Lubrication Automatic Lubrication Over Lubrication • Excess heat build-up • Wasted lubricant • Unnecessary labor cost • More component wear • Higher energy usage • Increased operating costs Amount Under Lubrication Amount Optimal Lubrication Time EXAMPLE: Infrequent filling of the bearing results in periods of over and under lubrication Time EXAMPLE: Maintain optimal lubrication by replenishing only the lubricant that is used, with small amounts at frequent intervals Graco Pumps-at-a-Glance Selecting the Right Pump is Easy! Choose your pump based on the system injector/metering device, power source and fluid type. SP SLP = Series Progressive Graco Pump = Single Line Parallel DL Metering Device SP E-Series SLP SLR AC DC • • • Injecto-Flo® • • • • • ® LubeMaster • ™ LubriSystem Pneumatic Hydraulic Fluid Type Manual Mechanical • G3 Injecto-Flo II = Single Line Resistive Power Source • ™ SLR = Dual Line Oil or grease • Oil or grease • Oil Oil or fluid grease • • • Oil or grease • Oil or grease • Maxi-Flo® • • Oil • • Oil Miniature Meter-Flo • • Oil Modu-Flo® • • MSA • Meter-Flo ® PH Pump • • • Manual Grease Gun ® • • Oil or grease • • • Oil or grease • • ® Thrif-T Luber • • Oil or grease • • Oil or grease Oil Pump Package Example: Reservoir A variety of reservoirs are available to fit your specific needs. Choose from cylindrical or rectangular, metal or plastic with sizes up to 30 pounds for grease and 40 pints for oil. Lubrication Management Accessories Choose from a variety of devices to manage your system including low level- and pressure sensors, cycle indicators and more! (Accessories vary by pump family) Manifold (available on Modu-Flo) Pump Choose your pump from the chart above. Graco offers a wide variety to satisfy virtually any application. Manifolds connect the pump and reservoir. Select a package with a built-in manifold, or for more control over your system, select each component separately with a Graco Modu-Flo system. A Modu-Flo system includes a manifold, which allows all reservoirs to fit onto all pumps. Pneumatic Pumps Lubrication Pumps MSA-10 and MSA-100 ✓ Works With: SP MSA Series products are used together with main lubrication supply lines where the pump is fed directly with no additional reservoir required. No reservoir makes the MSA Series ideal for locations that are difficult to reach or undesirable to enter.* Use the MSA-10 for standard applications and the MSA-100 when high operating pressures and larger outputs are required. MSA-100 Key Features • Ideal for applications where space is at a premium • Handles high pressure lubricant feed for direct line intake • Used with or without a reservoir for the ultimate flexibility MSA-10 Ordering Information and Technical Specifications Part No. Max Pump Output/Stroke cm3 (in3) Model Description Ratio Max. Lube Output Pressure, bar (psi) Lubrication Type 562855 MSA-100 pneumatic pump assembly (no reservoir) 13.1 (.80 ) 25:1 207 (3000)** Oil or grease up to NLGI #2 562854 MSA-10 pneumatic pump assembly (no reservoir) 1.97 (0.12) 25:1 100 (1450) Oil or grease up to NLGI #2 *MSA pumps can be used with standard Trabon reservoirs if desired **NOTE: Supplied with rupture-to-atmosphere indicator rated to 1450 psi (standard) For more details see Technical Bulletin #L12850 (MSA 10) and #L12851 (MSA 100) on www.graco.com - Instruction Manuals Lubrication Pumps Works With: E-Series ✓ SP The E-Series pump is a great entry level alternative to standard pneumatic pump products. This all-in-one pump package comes complete with no assembly required and is easy to install. All pump packages include highpressure rupture disc assembly and lube outlet check valve. The E-Series offers many reservoir options for either grease or oil. Great for any application where price is a concern and installation time is at a premium. Key Features #563365 Shown • Fast and easy installation–keeps costs at a minimum • Modular design allows field installation of accessories without disturbing existing plumbing • Smart pump design with few moving parts ensures long-lasting dependability Ordering Information and Technical Specifications Part No. Model Description 563365 E-pump with 3 lb plastic cylindrical grease reservoir, low level and pressure gauge 563363 E-pump with 6 lb plastic cylindrical grease reservoir 563364 E-pump with 6 lb plastic cylindrical grease reservoir, low level 563361 E-pump with 4 pint plastic rectangular oil reservoir 563362 E-pump with 4 pint plastic rectangular oil reservoir, low level 563358 E-pump only Max Pump Output Per Stroke, cm3 (in3) Ratio Max. Lube Output Pressure, bar (psi) 0.49 (0.03) 20:1 138 (2000) Lubrication Type Oil or grease up to NLGI #2 For more details see Technical Bulletin #L13126 on www.graco.com - Instruction Manuals Pneumatic Pumps ™ Lubrication Pumps Injecto-Flo AO-1 ✓ ✓ Works With: SLP SP The AO-1 pneumatic pumps are compact in size, but deliver higher pump output rates with its short pump off time between cycles. Great for applications using piston distributors for oil lubrication. Several reservoir sizes and materials to choose from. Key Features • Compact design easily fits into any application • Built–in vent valve gets you up and working with piston distributors fast–no kits to purchase or assemble Ordering Information and Technical Specifications Part No. Model Description 562846 Pump with 10.5 pint metal rectangular reservoir 562845 Pump with 4.2 pint plastic rectangular reservoir Max Pump Output/Stroke cm3 (in3) Ratio Max. Lube Output Pressure, bar (psi) Lubrication Type 13 (0.80) 4.5:1 31 (450) Oil (250-5000 SUS) For more details see technical bulletin #L12601 on www.graco.com - Instruction Manuals ™ Lubrication Pumps LubriSystem ✓ Works With: SLP Easy to design, modify and adjust to oil or grease applications large or small! Great for operation with injectors or piston distributors. Rugged construction maximizes your productivity–upgrading to the internal timer control completely automates the system. All packages include internal pressure relief, so no need to install extra parts with additional costs. Combine with LubriSystem injectors for easy, low cost system design solutions. Key Features • Ablility to serve large systems–up to 100 lube points or more! • Efficient design promotes increased productivity and less downtime • Several reservoir choices for both oil and grease applications Ordering Information and Technical Specifications Part No. Max Pump Output/ Stroke cm3 (in3) Model Description Ratio Max. Lube Output Pressure, bar (psi) Lubrication Type 563571 Pump, 6 lb. plastic cylindrical grease reservoir Grease up to NLGI #1 563572 Pump, 6 lb. plastic cylindrical grease reservoir and low level Grease up to NLGI #1 563573 Pump, 12 lb. plastic cylindrical grease reservoir and low level Grease up to NLGI #1 563574 Pump, 6 pint plastic cylindrical oil reservoir 563575 Pump, 12 pint plastic cylindrical oil reservoir 563576 Pump, 20 pint plastic cylindrical oil reservoir 563578 Pump, 12 pint plastic cylindrical oil reservoir and 10 watt low level 563577 Pump, 6 pint plastic cylindrical oil reservoir and 10 watt low level 563579 Standard air operated pump body, (no reservoir) 25-93 24.6 (1.5) 9:1 Oil Oil (360-1350) Oil Oil Oil Oil or grease up to NLGI #1 For more details see Technical Bulletin #L12100 on www.graco.com - Instruction Manuals Pneumatic Pumps Lubrication Pumps Pneumatic Modu-Flo ✓ Works With: SP The Modu-Flo system is ideal for applications where minimizing downtime is critical. Customizing is easy–just mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines. Choose from a wide variety of pneumatic pump configurations for both oil and grease applications. Key Features • Modular system design allows configurations to work in all applications • Easy to standardize on components and reduce inventory • Adjustable pump output for fast, convenient customization Ordering Information and Technical Specifications Part No. Max Pump Output/Stroke cm3 (in3) Model Description 563304 ALS-5 pump, single or double acting (no reservoir) 563306 ALS-25 pump, single or double acting (no reservoir) 563308 ALS-50 pump, single or double acting (no reservoir) 0.16-0.49 (0.01-0.03) Ratio Max. Lube Output Pressure, bar (psi) Lubrication Type 30:1 241 (3500) Oil or grease up to NLGI #2 0.98-3.93 (0.06-0.24) NOTE: Single- and double-acting pneumatic pumps (AL) have the same part number. For more details see Technical Bulletin #L12000 on www.graco.com - Instruction Manuals GRACO ADVANTAGE Accurate and Dependable Lubrication Systems While critical bearings are hard at work on your machine tool, press and production equipment, Graco’s line of centralized and automatic lubrication systems are delivering precise amounts of lubricant at frequent intervals to every lube point–even if they’re hard to reach. You’ll also get better end results and a higher quality product with the consistent shot accuracy of Graco’s metering systems. SINGLE LINE SERIES SYSTEM CYCLE SWITCH PRESSURE SWITCH TO BEARING POINTS TO BEARING POINTS TO BEARING POINTS SINGLE LINE PARALLEL SYSTEM Graco lubrication products help to increase production, reduce downtime and maintenance costs. Electric Pumps Lubrication Pumps G3 ✓ ✓ Works With: SP SLP Changing grease types, changing temperatures and challenging installation requirements are no problem for the G3 electric lubrication pump. With its flexible design, including adjustable pump elements and an ability to work with both injector-based and series progressive systems, G3 is a rugged, cost-effective pump designed to serve multiple markets and applications. The new pump features three control choices, which means added flexibility for easy lube system setup, operation and troubleshooting. The pump extends machinery life, reduces operating costs and increases productivity for usage in a wide variety of markets, including in-plant manufacturing, mobile on-road and off-road, and wind turbines. Key Features • • • • • • • • Powerful pumping performance – can be used with your grease of choice, NLGI #000 - #2 and oil Advanced flow dynamics – helps to prevent grease separation Load minimizing drive – for longer life Adjustable stroke pump – ensures a custom fit Five reservoir sizes to select from – provides a custom fit The most advanced user controls in its class – allows you to customize for your unique needs Follower Plate Option Available with 2,4,8,12 and 16L reservoirs. Ordering Information and Technical Specifications Part of configuration offering. For complete packages, items & accessories see: G3 Selection Guide n° 340706 Part No. Max Pump Max. Operating Lubrication Control Output Volume Pressure, Type Type cm3 (in3) bar (psi) Model Description 96G002 90-240 VAC, wiper arm, DIN power connector, 2 l reservoir No control 96G003 12 VDC, wiper arm, external low level, 3 pin CPC power connector, 2 l reservoir No control 96G005 24 VDC, wiper arm, external low level, 3 pin CPC power connector, 2 l reservoir No control 96G007 90-240 VAC, wiper arm, external low level, DIN power connector, 2 l reservoir No control 96G033 12 VDC, wiper arm, low level alarm, 3 pin CPC power connector, 2l reservoir Pro 96G011 24 VDC, low level, manual run input, wiper arm, 3 pin CPC power connector, 2l reservoir Pro 96G012 24 VDC, low level, manual run input, follower plate, 3 pin CPC power connector, 2 l reservoir Pro 96G013 90-240 VAC, low level, wiper arm, DIN power connector, 2 l reservoir Pro 96G035 12 VDC, wiper arm, low level, 5 pin CPC power connector , single sensor input (cycle/pressure), vent valve, 2l reservoir Max 96G031 24 VDC, low level, single sensor input (cycle/pressure), wiper arm, 3 pin CPC power connector, manual run input, 2l reservoir Max 96G018 24 VDC, low level, single sensor input (cycle/pressure), vent valve output, manual run input, follower plate, 3 pin CPC power connector, 2 l reservoir Max 96G032 90-240 VAC, low level, single sensor input (cycle/pressure), wiper arm, DIN power connector, 2 l reservoir Max 96G020 90-240 VAC, low level, single sensor input (cycle/pressure), vent valve output, follower plate, DIN power connector, 2 l reservoir Max 96G021 12 VDC, low level, three sensor inputs (combination cycle/pressure), machine count, vent valve output, alarm output, manual run input, wiper arm, DIN power connector, 2 l reservoir Max 96G024 24 VDC, low level, three sensor inputs (combination cycle/pressure), machine count, vent valve output, alarm output, manual run input, follower plate, DIN power connector, 2 l reservoir Max 96G025 90-240 VAC, low level, three sensor inputs (combination cycle/pressure), machine count, vent valve output, alarm output, manual run input, wiper arm, DIN power connector, 2 l reservoir Max Adjustable 2 (0.12) 3 (0.18) 4 (0.25) 352 (5100) Grease Up to NLGI #2 For more details see Form # 340574 on www.graco.com - Instruction Manuals Electric Pumps LubeMaster Lubrication Pumps ✓ Works With: SP The LubeMaster is a rugged pump package designed for any harsh duty application. The adjustable output and antifriction drive bearings make it both reliable and efficient. With several reservoir choices and accessories to choose from, the LubeMaster pump can be easily customized to meet virtually all application needs. Key Features • Rugged cast iron main body and heavy-duty internal components deliver consistent performance in harsh applications • Reliable design includes anti-friction bearings for years of trouble-free operation Ordering Information and Technical Specifications Part No. Max Pump Output/ Stroke cm3 (in3) Model Description* Max Pump Output Max. Lube Output Volume cm3 (in3) Pressure, bar (psi) Lubrication Type LM2323 115/230 VAC, 1 PH, 1725 RPM, 20 pint plastic cylindrical oil reservoir, low level, 10:1 LM4523 115/230 VAC, 1 PH, 1725 RPM, 20 pint metal cylindrical oil reservoir, low level, 60:1 LM4533 230/460 VAC, 3 PH, 1725 RPM, 20 pint metal cylindrical oil reservoir, low level, 60:1 LM5331 230/460 VAC, 3 PH, 1725 RPM, 12 lb plastic cylindrical grease reservoir, low level, 10:1 LM5521 115/230 VAC, 1 PH, 1725 RPM, 12 lb plastic cylindrical grease reservoir, no low level, 60:1 LM5544 115/230 VAC, 1PH, 1140 RPM, 12 lb plastic cylindrical grease reservoir, low level, 60:1 VAC, 1PH, 1140 RPM,, 12 lb plastic cylindrical grease reservoir, low level, LM5644 115/230 60:1-wall mount LM6334 115/230 VAC, 11PH, 1140 RPM, 20 lb plastic cylindrical grease reservoir, low level, 10:1 LM6344 115 VAC/1140 RPM, 12 lb plastic cylindrical grease reservoir, 10:1 LM6524 115/230 VAC, 1 PH, 1725, 20 b plastic cylindrical grease reservoir, low level, 60:1 LM6534 230/460 VAC, 3 PH, 1725 RPM, 20lb plastic cylindrical grease reservoir, low level, 60:1 0.16 – 0.82 (0.01 – 0.05) 0.16 - 143.41 (0.01 - 8.62) 340 psi (5000 bar) Oil or grease up to NLGI #2 LM6544 115/230 VAC, 11PH, 1140 RPM, 20 lb plastic cylindrical grease reservoir, low level, 60:1 LM7344 115/230 VAC, 11PH, 1140 RPM,, 12 lb metal cylindrical grease reservoir, low level, 10:1 VAC, 3PH, 1140 RPM, 12 lb metal cylindrical grease reservoir, low level, LM7654 230/460 60:1, wall mount LM8334 230/460 VAC, 3 PH,1725 RPM, 20 lb metal cylindrical grease reservoir, low level, 10:1 VAC, 3PH, 1140 RPM, 20 lb metal cylindrical grease reservoir, low level, LM8454 230/460 10:1, wall mount LM8531 230/460 VAC, 3PH, 1725 RPM, 20 lb metal cylindrical grease reservoir, no low level 60:1 LM8534 115/230 VAC, 1 PH, 1725 RPM , power prime reservoir assembly, no low level, 60:1 LM9521 115 VAC/1725 RPM, power prime reservoir assembly, 60:1 *All pumps are floor-mounted unless noted For more details see Technical Bulletin #L12715 on www.graco.com - Instruction Manuals Electric Pumps Lubrication Pumps ✓ Works With: Miniature Meter-Flo SP Designed for use with virtually any type of Series Progressive or Single Line Resistive oil lubrication system. The Miniature Meter-Flo’s rugged steel reservoir and motor assembly withstand the toughest applications. Capable of high volumetric output (up to 14 in3/minute) operating continuously at pressures up to 1000 psi (69 bar). Key Features • Ideal for smaller series progressive systems requiring continuous lubrication • Compact and rugged for years of dependable operation in any application • Several options available to create a complete system using feedback and control Ordering Information and Technical Specifications Part No. Model Description MM1111 115 VAC, 12 pint metal rectangular reservoir MM1112 115 VAC, 12 pint metal rectangular reservoir (with level switch) MM1121 115 VAC, 12 pint metal rectangular reservoir (with pressure Switch) MM1122 115 VAC, 12 pint metal rectangular reservoir (with pressure & level switches) MM2112 115 VAC, 24 pint metal rectangular reservoir (with level switch) MM2122 115 VAC, 24 pint metal rectangular reservoir (with pressure & level switches) MM3112 115 VAC, 40 pint metal rectangular reservoir (with level switch) MM3122 115 VAC, 40 pint metal rectangular reservoir (with pressure & level switches) MM1212 115 VAC, 12 pint metal rectangular reservoir (with level switch) MM1222 115 VAC, 12 pint metal rectangular reservoir (with pressure & level switches) MM2211 115 VAC, 24 pint metal rectangular reservoir (with level switch) MM2212 115 VAC, 24 pint metal rectangular reservoir (with level switch) MM2221 115 VAC, 24 pint metal rectangular reservoir (with pressure switch) MM2222 115 VAC, 24 pint metal rectangular reservoir (w/pressure & level switches) MM3211 115 VAC, 40 pint metal rectangular reservoir MM3212 115 VAC, 40 pint metal rectangular reservoir (with level switch) MM1311 115 VAC, 12 pint metal rectangular reservoir MM1312 115 VAC, 12 pint metal rectangular reservoir (with level switch) MM1322 115 VAC, 12 pint metal rectangular reservoir (with pressure & level switches) MM2312 115 VAC, 24 pint metal rectangular reservoir (with level switch) MM2322 115 VAC, 24 pint metal rectangular reservoir (with pressure & level switches) MM3322 115 VAC, 40 pint metal rectangular reservoir (with pressure & level switches) MM1411 115 VAC, 12 pint metal rectangular reservoir MM1412 115 VAC, 12 pint metal rectangular reservoir (with level switch) MM1422 115 VAC, 12 pint metal rectangular reservoir (with pressure & level switches) MM2411 115 VAC, 24 pint metal rectangular reservoir MM2412 115 VAC, 24 pint metal rectangular reservoir (with level switch) MM3411 115 VAC, 40 pint metal rectangular reservoir MM3412 115 VAC, 40 pint metal rectangular reservoir (with level switch) MM3422 115 VAC, 40 pint metal rectangular reservoir (with pressure & level switches) Max Pump Output Volume cm3 (in3) Max. Lube Output Pressure, bar (psi) 16 (1) 0-69 (0-1000) Lubrication Type 82 (5) 0-138 (0-2000) Oil (160-15000 SUS) 131 (8) 229 (14) 0-103 (0-1500) For more details see Technical Bulletin #L12600 on www.graco.com - Instruction Manuals Injecto-Flo EO-1 Lubrication Pumps ✓ ✓ Works With: SP SLP The EO-1 series electric pump package is designed for any low-pressure, intermittent oil lubrication system where high volume rates are required. Use with any piston distributor metering device for easy-to-install, custom solutions.* Key Features • Compact design easily fits into applications where space is limited • Built–in vent valve gets you up and working with piston distributors fast–no kits to purchase and assemble Ordering Information and Technical Specifications Part No. Model Description 562837 EO-1 pump, 115VAC,1PH, 6.3 pint plastic rectangular oil reservoir 562839 EO-1 pump, 115VAC, 1PH, 12.6 pint plastic rectangular oil reservoir 562843 EO-1 pump, 115VAC, 1PH, 12.6 pint plastic rectangular oil reservoir 562844 EO-1 pump, 115VAC, 1PH, 25.3 pint plastic rectangular oil reservoir 562849 EO-1 pump, 230/400 VAC, 3PH, 6.3 pint plastic rectangular oil reservoir 562838 EO-1 pump, 115VAC, 1PH, 7.6 pint plastic rectangular oil reservoir 562841 EO-1 pump, 230VAC, 1PH, 12.6 pint plastic rectangular oil reservoir 562842 EO-1 pump, 230VAC, 1PH, 12.6 pint plastic rectangular oil reservoir, return port 562840 EO-1 pump, 230VAC, 1PH, 15.8 pint plastic rectangular oil reservoir NOTE: Motor voltages are 50/60 Hz and single phase. *Can be used with Injecto-Flo II series piston distributor products Max Pump Output Volume cm3 (in3) Max. Lube Output Pressure, bar (psi) Lubrication Type 200 (12) 40 (580) Oil ISO VG68 - ISO VG460 or 50-1000 cSt For more details see Technical Bulletins #L12605 and #L12606 on www.graco.com - Instruction Manuals Lubrication Pumps ✓ ✓ Works With: SP Injecto-Flo EO-3 SLP A cost effective, low pressure oil solution designed for use with any high volume, intermittent lubrication system. EO-3 packages have a standard integrated controller with LED indicators for a completely automated system. Use with any piston distributor metering devices for easy to install, custom solutions.* Key Features • Compact design with integrated control and bright LED's to verify system operation • Built–in vent valve gets you up and working with piston distributors fast–no kits to purchase and assemble Ordering Information and Technical Specifications Part No. Model Description Max Pump Output Volume cm3 (in3) Max. Lube Output Pressure, bar (psi) 562850 115 VAC, 1 PH, 7.6 pint plastic rectangular reservoir (integrated timer, pressure switch, low level) 12 (200) 350 (25) 562847 115 VAC, 1 PH, 12.6 pint plastic rectangular reservoir (no timer, pressure switch, low level) 12 (200) 320 (22) 562852 115 VAC, 1 PH, 7.6 pint plastic rectangular reservoir (no timer, pressure switch, low level = N.C.) 12 (200) 350 (25) 562851 115 VAC, 1 PH, 7.6 pint plastic rectangular reservoir (no timer, pressure switch, low level) 12 (200) 350 (25) 258294 230 VAC, 1 PH, 7.6 pint plastic rectangular reservoir (integrated timer, pressure switch, low level) 24 (400) 435 (30) 564254 24 VDC, 1 PH, 7.6 pint plastic rectangular reservoir (integrated timer, pressure switch, low level) 12 (200) 350 (25) 24B430 230 VAC, 1 PH, 7.6 pint plastic rectangular reservoir (no timer, pressure switch, low level) Lubrication Type Oil ISO VG68 ISO VG460 or 50-1000 cSt All pumps are Low Level N.O. (Normally Open) unless noted above as N.C. (Normally Closed) *Can be used with Injecto-Flo II series piston distributor products For more details see Technical Bulletins #L12605 and #L12606 on www.graco.com - Instruction Manuals Simple Installation–Dependable Operation Lubrication Pumps ✓ Works With: Injecto-Flo II SLP Great versatility in a small package! The Injecto-Flo II’s compact design is the ideal solution for automatic lubrication on small and mid-sized machines. Combine with Injecto-Flo II piston distributor metering devices for a complete oil or fluid grease lubrication system. Internal controller with LED alarms is easy to program for any application. Key Features • Many control options to choose from to fully automate your lube system • Use with Graco piston distributors to complete your system • Dependable high-quality gear pump for years of trouble-free operation Ordering Information and Technical Specifications Part No. Max Pump Output Max. Lube Output Lubrication Type Volume cm3 (in3) Pressure, bar (psi) Model Description 122547 230 VAC, 6.3 pint plastic rectangular oil reservoir ( no low level, screw cap) 122551 230 VAC, 6.3 pint plastic rectangular oil reservoir (low level, 1-din, screw cap) 15U858 230 VAC, 6.3 pint plastic rectangular oil reservoir (low level, 2-m12, 10mm cap) 122565 230 VAC, 12.7 pint plastic rectangular oil reservoir (no low level, screw cap) 564138 230 VAC, 12.7 pint plastic rectangular oil reservoir (low level, 1-din, screw cap) 122576 230 VAC, 12.7 pint plastic rectangular oil reservoir (low level, 2-din, screw cap) 15U860 230 VAC, 12.7 pint plastic rectangular oil reservoir (low level, 2-m12, 10mm cap) 122898 230 VAC, 12.7 pint plastic rectangular oil reservoir with control (low level, pressure, two strain relief wiring points, screw cap) 15U859 230 VAC, 6.3 pint plastic rectangular oil reservoir (low level, 1-m12, 10mm cap) 563301 230 VAC, 6.3 pint plastic rectangular grease reservoir (no low level, 10mm cap) 122582 230 VAC, 6.3 pint plastic rectangular grease reservoir (low level, 1-din, screw cap) 557547 230 VAC, 6.3 pint plastic rectangular grease reservoir (low level, 2-m12, 10mm cap) 122591 230 VAC, 12.7 pint plastic rectangular grease reservoir (low level, 1-din, screw cap) 500 (30.51) 30 (435) Oil (30-1500 cSt) 40 (580) Fluid grease up to NLGI 000 200 (12.20) For more details see Technical Bulletin #L12121 on www.graco.com - Instruction Manuals Electric Pumps Lubrication Pumps Works With: ✓ ✓ SP SLR Maxi-Flo Everything you need to get your Single Line Resistive Oil lubrication system installed and running quickly. A standard, compact package comes complete with reservoir, pump, gear motor, and choice of internal or remote control. Simple slide switches allow for easy setup of pump run cycle time. Bright LED indicators for low level and power allow for easy troubleshooting and verification. Key Features • Integrated control with manual run button for easy setup • Compact design fits anywhere • 500 psi rating for using with various orifice metering devices Ordering Information and Technical Specifications Part No. Max Pump Max Pump Max. Operating Output/Stroke Output Volume Pressure, bar (psi) 3 3 3 3 cm (in ) cm (in ) Model Description 563379 115 VAC, 4 pint plastic rectangular oil reservoir, solid state timer control 563376 115 VAC, 4 pint plastic rectangular oil reservoir, remote control 0.165 (0.01) 1.64 (0.1) 34 (500) Lubrication Type Oil (60-30,000 SUS) For more details see Technical Bulletin #L13110 on www.graco.com - Instruction Manuals Lubrication Pumps ✓ ✓ ✓ SP DL Works With: Meter-Flo SLR The Meter-Flo direct drive pumps are ideal for applications requiring continuous oil delivery to up to 1000 lubrication points. With its solid pump housing and reservoir, these rugged gear pumps are designed for dependable operation in high demand applications. The gear pump is available with a direct-coupled 1/2 horsepower motor capable of 1725 RPM’s with output volumes of 245 cubic inches per minute. Eleven different pump models to choose from. Key Features • Pump packages for even the largest applications–up to 1000 lube points! • Rugged design for dependable service in high-demand applications Ordering Information and Technical Specifications Part No. Model Description 557814 9 cu. In./min @ 1140 RPM - 14 cu. In./min @ 1725 RPM 557813 18 cu. In./min @ 1140 RPM - 30 cu. In./min @ 1725 RPM 557815 56 cu. In./min @ 1140 RPM - 84 cu. In./min @ 1725 RPM 557816 76 cu. In./min @ 1140 RPM - 117 cu. In./min @ 1725 RPM 557817 111 cu. ln./min @ 1140 RPM - 168 cu. ln./min @ 1725 RPM 557820 161 cu. In./min @ 1140 RPM - 245 cu. In./min @ 1725 RPM Max. Lube Output Pressure, bar (psi) Lubrication Type 21-104 (300-1500*) Oil (300-3,000 SUS) * NOTE: Internal pressure relief to 1200 psi For more details see Technical Bulletin #L12611 and L12608 on www.graco.com - Instruction Manuals Electric Pumps Lubrication Pumps Modu-Flo ✓ Works With: SP The Modu-Flo system is ideal for applications where minimizing downtime is critical. Customizing is easy–just mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir, without disconnecting lubrication lines. Electric pumps available for use with AC or DC supply voltage make Modu-Flo the right solution for any automated electric lubrication system. Key Features • Modular system design allows configurations to work in all applications • Easy to standardize on components and reduce inventory • Adjustable pump output for fast, convenient customization Ordering Information and Technical Specifications Part No. Max Pump Output Volume cm3 (in3) Model Description 563356 24 VDC with 20 ft cable (no reservoir) 0.29 (4.7) 563346 115 VAC with 20 ft cable (no reservoir) 0.58 (9.5) 564371 115 VAC without 20 ft cable (no reservoir) 0.58 (9.5) Max. Lube Output Pressure, bar (psi) Lubrication Type Oil or Grease 172 (2500) Up to NLGI #2 For more details see Technical Bulletin #L12011 on www.graco.com - Instruction Manuals Lubrication Pumps ✓ Works With: Thrif-T Luber SLR The perfect fit for entry-level, Single Line Resistive orifice lubrication systems. A complete electric package includes pump, reservoir and integrated control (remote version optional) for fast and easy installation. Can pay for itself right away! Key Features • Use with Thrif-T Luber orifice dispensers for a complete system • Big on features–low on price! • Compact, turnkey system solution Ordering Information and Technical Specifications Part No. Model Description 564067 115 VAC pump, 4 pint plastic rectangular oil reservoir, remote control 564068 115VAC pump, 4 pint plastic oil reservoir, timer control Max Pump Output Volume cm3 (in3) Max. Lube Output Pressure, bar (psi) 6.9 (0.42) 10 (150) Lubrication Type Oil (100-10,000 SUS) For more details see Technical Bulletin #LTL400 on www.graco.com - Instruction Manuals Hydraulic Pumps Lubrication Pumps Modu-Flo ✓ Works With: SP The Modu-Flo system is ideal for applications where minimizing downtime is critical. Customizing is easy–just mix and match pumps, reservoir and manifolds in any configuration to meet any application. Replace the pump or reservoir without disconnecting lubrication lines. Choose from a wide variety of hydraulic pumps that operate with grease or oil. Key Features • Modular system design allows configurations to work in all applications • Easy to standardize on components and reduce inventory • Adjustable pump output for fast, convenient customization Ordering Information and Technical Specifications Part No. Model Description Max Pump Output/ Stroke cm3 (in3) Ratio Max. Hydraulic Pressure, bar (psi) 563305 HLJ-5 pump, double acting (no reservoir) 0.16-0.49 (0.01-0.03) 5.5:1 13.8-137.9 (200-2000) 563345 HLJ-5X pump, double acting (no reservoir) 0.49-1.5 (0.03-.09) 2.2:1 13.8-207 (200-3000) 563307 HLJ-25 pump, double acting (no reservoir) .49-2.0 (0.03-0.12) 5.5:1 13.8-137.9 (200-2000) Lubrication Type Oil or grease up to NLGI #2 For more details see Technical Bulletin #L12000 on www.graco.com - Instruction Manuals Manual Pumps Lubrication Pumps ✓ Works With: Thrif-T Luber SLR A simple and effective positive displacement pump that delivers up to 0.50 in3 per stroke. Compact design easily mounts on any piece of equipment. A spring return drives the piston for controlled lubrication delivery. Key Features • Cost-effective solution with centralized system benefits • Compact design fits anywhere • Easy to setup and use Ordering Information and Technical Specifications Part No. 564012 Model Description Hand pump, 4 pint plastic rectangular oil reservoir Max Pump Output/Stroke cm3 (in3) Max. Operating Pressure, bar (psi) Lubrication Type 8.2 (0.5) 5 (75) (100-10,000 SUS) For more details see Technical Bulletin #LTL400 on www.graco.com - Instruction Manuals Manual Pumps Lubrication Pumps Works With: ✓ ✓ ✓ SP DL PH Pump SLR A great entry-level solution for your centralized lubrication system, the PH Pump gives you manual lubrication delivery when you need it. An easy-to-operate lever arm delivers up to 0.15 in3 with one full stroke, while sturdy construction is designed for years of use. Key Features • • • • Part No. 563393 564378 564379 564381 564389 564383 564386 564385 564384 564387 Cost-effective solution with centralized system benefits Great entry-level solution! Works with any type of centralized system Two outlet valve options for use with dual line systems Max Pump Output/ Max. Lube Output Stroke cm3 (in3) Pressure, bar (psi) Model Description Pump (w/out reservoir) Pump w/5 pint plastic cylindrical oil reservoir Pump w/5 lb. plastic cylindrical grease reservoir Pump w/5 lb. metal cylindrical grease reservoir Pump w/6 lb. plastic cylindrical grease reservoir Pump w/12 lb. plastic cylindrical grease reservoir Pump w/20 lb. plastic cylindrical grease reservoir Pump w/20 pint plastic cylindrical oil reservoir Pump w/12 lb. metal cylindrical grease reservoir Pump w/6 pint plastic cylindrical oil reservoir 2.46 (0.15) 207 (3000) Lubrication Type Oil, Grease up to NLGI #2 For more details see Technical Bulletin #L12415 on www.graco.com - Instruction Manuals Manual Grease Gun Lubrication Pumps ✓ ✓ ✓ ✓ Works With: SP SLP DL SLR A simple, compact, cost-effective way to deliver oil or grease. Ideal for purging existing centralized systems when changing lubrication or performing maintenance. The Manual Grease Gun is also a troubleshooting tool for locating leaks or plugged lines, or for priming your new lubrication system upon start-up. Key Features • Cost-effective solution with centralized system benefits • Ideal for troubleshooting and system testing • Handy carrying case for easy portability Ordering Information and Technical Specifications Part No. 562857 Model Description Pump package with carrying case Max Pump Output/ Stroke cm3 (in3) Max. Output Pressure, bar (psi) Lubrication Type 1.5 (0.09) 345 (5000) Oil or grease up to NLGI #2 For more details see Technical Bulletin #L12405 on www.graco.com - Instruction Manuals Manual Pumps Lubrication Pumps LubriSystem ✓ Works With: SLP The LubriSystem hand pump package offers versatility for use in any application, large or small! Great for operation with Injectors or Piston Distributors, with oil or grease. Sturdy construction of aluminum and steel to provide years of service. Compact design can be used in areas where space is limited. Rugged bracket allows the pump package to be mounted in place in any application. Key Features • Bracket-mount design for easy installation • Rugged design for years of operation • Built-in pressure venting for use with injectors Ordering Information and Technical Specifications Part No. 564421 Max Pump Output/ Stroke cm3 (in3) Model Description Max. Output Pressure, bar (psi) Lubrication Type Hand pump, 6 lb. plastic cylindrical grease reservoir, 3000 psi gauge Grease up to NLGI #1 Grease up to NLGI #1 564422 Hand pump, 12 lb. plastic cylindrical grease reservoir, 3000 psi gauge 564423 Hand pump, 20 lb. plastic cylindrical grease reservoir, 3000 psi gauge 564419 Hand pump, 12 Pint plastic cylindrical oil reservoir, 3000 psi gauge 564420 Hand pump, 20 Pint plastic cylindrical oil reservoir, 3000 psi gauge 563580 Hand pump body (no reservoir) 2 (0.13) Grease up to NLGI #1 207 (3000) Oil Oil Grease up to NLGI #1 For more details see Technical Bulletin #L12100 on www.graco.com - Instruction Manuals Mechanical Pumps LubeMaster Ratchet Pump Lubrication Pumps ✓ Works With: SP Lubricates only while the machine is running! The Lubemaster Clutch Drive is a rugged, reliable pump powered mechanically by the machine using the lubrication. This pump is ideal for applications where lubrication cycles vary and are unpredictable. The TRABON Clutch Drive Lubemaster is a rugged, reliable pump designed to be driven mechanically by the machine being lubricated. The Lubemaster can be used with Series Progressive,Reversible or Bi-Flo systems. Ordering Information and Technical Specifications Degrees of Throw Effetive Ratio Impulses per minute Pump strokes per hour Output per hour Minimum Maximum 12° 30:1 5 min 10 .100 cu. in. (1.639 cu.cm) .500 cu. in. (8.195 cu.cm) 60° 6:1 150 Max. 1500 15.00 cu. in. (245.85 cu.cm) 75.00 cu. in. (1229.25 cu.cm) For more details see Technical Bulletin #L12405 on www.graco.com - Instruction Manuals Ordering Information Accessories Modu-Flo and E-Series Reservoirs 563909 E-pump spare part repair kit (contains O-rings, gaskets, springs, and retainers) 563359 4 pint rectangular plastic oil reservoir 562891 5 pint cylindrical plastic oil reservoir 563328 Pressure switch for all reservoirs 562904 6 pint cylindrical plastic oil reservoir 563326 1,450 psi blowout switch 6, 12, 20 pint/pound cylindrical reservoir 562889 12 pint cylindrical plastic oil reservoir 562890 20 pint cylindrical plastic oil reservoir 563179 1,450 psi standard blowout disk 563320 24 pint rectangular metal oil reservoir 563325 1,450 psi blowout switch 5 pt/lb cylindrical reservoir 563319 12 pint rectangular metal oil reservoir 563327 1,450 psi blowout switch for all tanks 563321 40 pint rectangular metal oil reservoir 563315 115 VAC, 2-position, 3-way pneumatic solenoid valve 562910 3 lb cylindrical plastic grease reservoir 563312 Replacement solenoid valve for 563315 562888 5 lb cylindrical plastic grease reservoir 563332 24 VDC, 2-position, 3-way pneumatic solenoid valve 562905 6 lb cylindrical plastic grease reservoir 563349 24 VDC, 2-position, 3-way pneumatic solenoid valve, with Hirschman connection 562884 12 lb cylindrical plastic grease reservoir 563339 115 VAC timer kit for all tanks 562885 20 lb cylindrical plastic grease reservoir 563340 115 VAC timer kit for 5 pt/lb cylindrical reservoirs 562906 6 lb cylindrical metal grease reservoir 563342 115 VAC timer kit for 6, 12, 20 pt/lb cylindrical reservoirs 562886 12 lb cylindrical metal grease reservoir 563341 115 VAC timer kit for 6, 12, 20 pt/lb cylindrical reservoirs 562887 20 lb cylindrical metal grease reservoir 563902 AL-5M seal kit 563903 AL-25M seal kit 563904 AL-50M seal kit 563905 HL-5M seal kit Modu-Flo Manifolds (Baseplates) 563333 Pump to reservoir manifold, NPT with liquid filled gauge, fill check, outlet check, & blowout 563329 Pump to reservoir manifold, NPT (no hardware or fittings) 563906 HL-25M seal kit 563355 Pump to reservoir manifold, SAE, with dry gauge, fill check, outlet check, and blowout 563925 HL-5X seal kit 563324 Pump to reservoir manifold, NPT, with dry gauge, fill check, outlet check, & blowout 563337 Pump mounting kit (contains mounting screws and O-rings) 563331 Pump to reservoir manifold, NPT, with dry gauge, fill check, outlet check, & tubed blowout 562901 5 pt/lb plastic replacement reservoir assembly (4 in O.D. x 13 in long) 563323 Remote pump manifold, NPT, with fill, check, outlet check, and blowout 562909 6 pt/lb plastic replacement reservoir assembly (6 in O.D. x 8.5 in long) 563330 Remote pump manifold, NPT, with fill, check, outlet check, and tubed blowout 562902 12 pt/lb plastic replacement reservoir assembly (6 in O.D. x 13 in long) 562903 20 pt/lb plastic replacement reservoir assembly (6 in O.D. x 20 in long) 564270 12 lb metal replacement reservoir assembly (6 in O.D. x 13 in long) 564271 20 lb metal replacement reservoir assembly (6 in O.D. x 20 in long) Modu-Flo and E-Pump Spare Parts and Accessories 563378 Low level switch kit, 10 watt, 4 pint rectangular oil reservoir 557826 Replacement switch for P/N 563378 563014 Low level switch, 10 watt, for 6 pint cylindrical oil reservoirs 563015 Low level switch, 10 watt, for 5 and 20 pint cylindrical oil reservoir 557825 Replacement switch for P/N’s 563014, 563015,563016 563322 Low level switch, 15 amp, for all grease reservoirs (except 3 lb) 557781 Replacement switch for P/N 563322 563316 Low level switch, 15 amp, for 5 and 12 pint cylindrical oil reservoirs 563318 Low level switch, 15 amp, for 6 pint cylindrical oil reservoir 563317 Low level switch, 15 amp, for 20 pint cylindrical oil reservoir 563016 Low level switch, 10 watt, for 20 pint cylindrical oil reservoir G3 Accessories 571061 Vent Valve Kit, 12 VDC - vent valve, adjustable pressure relief (500-5000 psi, 35-345 bar), pressure gauge, zerk fitting 571029 Vent Valve Kit, 24 VDC/90-240 VAC - vent valve, adjustable pressure relief (500-5000 psi, 35-345 bar), pressure gauge, zerk fitting. Also for G3 Max control AC pumps Complete Your System Modu-Flo and E-Series Reservoirs 563359 4 pint rectangular plastic oil reservoir 562891 5 pint cylindrical plastic oil reservoir 562904 6 pint cylindrical plastic oil reservoir 562889 12 pint cylindrical plastic oil reservoir 562890 20 pint cylindrical plastic oil reservoir 563320 24 pint rectangular metal oil reservoir 563319 12 pint rectangular metal oil reservoir 563321 40 pint rectangular metal oil reservoir 562910 3 lb cylindrical plastic grease reservoir 562888 5 lb cylindrical plastic grease reservoir 562905 6 lb cylindrical plastic grease reservoir 562884 12 lb cylindrical plastic grease reservoir 562885 20 lb cylindrical plastic grease reservoir 562906 6 lb cylindrical metal grease reservoir 562886 12 lb cylindrical metal grease reservoir 562887 20 lb cylindrical metal grease reservoir Modu-Flo Manifolds (Baseplates) to reservoir manifold, NPT with liquid filled gauge, fill 563333 Pump check, outlet check, & blowout 563329 Pump to reservoir manifold, NPT (no hardware or fittings) to reservoir manifold, SAE, with dry gauge, fill check, 563355 Pump outlet check, and blowout to reservoir manifold, NPT, with dry gauge, fill check, 563324 Pump outlet check, & blowout to reservoir manifold, NPT, with dry gauge, fill check, 563331 Pump outlet check, & tubed blowout pump manifold, NPT, with fill, check, outlet check, and 563323 Remote blowout pump manifold, NPT, with fill, check, outlet check, and 563330 Remote tubed blowout Modu-Flo and E-Pump Spare Parts and Accessories Low level switch kit, 10 watt, 4 pint rectangular oil 563378 reservoir 557826 Replacement switch for P/N 563378 563014 Low level switch, 10 watt, for 6 pint cylindrical oil reservoirs level switch, 10 watt, for 5 and 20 pint cylindrical oil 563015 Low reservoir 557825 Replacement switch for P/N’s 563014, 563015,563016 level switch, 15 amp, for all grease reservoirs 563322 Low (except 3 lb) 557781 Replacement switch for P/N 563322 level switch, 15 amp, for 5 and 12 pint cylindrical oil 563316 Low reservoirs 563318 Low level switch, 15 amp, for 6 pint cylindrical oil reservoir level switch, 15 amp, for 20 pint cylindrical oil 563317 Low reservoir level switch, 10 watt, for 20 pint cylindrical oil 563016 Low reservoir spare part repair kit (contains O-rings, gaskets, springs, 563909 E-pump and retainers) 563328 Pressure switch for all reservoirs psi blowout switch 6, 12, 20 pint/pound 563326 1,450 cylindrical reservoir 563179 1,450 psi standard blowout desk 563325 1,450 psi blowout switch 5 pt/lb cylindrical reservoir 563327 1,450 psi blowout switch for all tanks 563315 115 VAC, 2-position, 3-way pneumatic solenoid valve 563312 Replacement solenoid valve for 563315 563332 24 VDC, 2-position, 3-way pneumatic solenoid valve VDC, 2-position, 3-way pneumatic solenoid valve, with 563349 24 Hirschman connection 563339 115 VAC timer kit for all tanks 563340 115 VAC timer kit for 5 pt/lb cylindrical reservoirs 563342 563341 563902 563903 563904 563905 563906 563925 115 VAC timer kit for 6, 12, 20 pt/lb cylindrical reservoirs 115 VAC timer kit for 6, 12, 20 pt/lb cylindrical reservoirs AL-5M seal kit AL-25M seal kit AL-50M seal kit HL-5M seal kit HL-25M seal kit HL-5X seal kit Pump mounting kit (contains mounting screws and 563337 O-rings) plastic replacement reservoir assembly 562901 5(4pt/lb in O.D. x 13 in long) plastic replacement reservoir assembly 562909 6(6pt/lb in O.D. x 8.5 in long) pt/lb plastic replacement reservoir assembly 562902 12 (6 in O.D. x 13 in long) pt/lb plastic replacement reservoir assembly 562903 20 (6 in O.D. x 20 in long) lb metal replacement reservoir assembly 564270 12 (6 in O.D. x 13 in long) lb metal replacement reservoir assembly 564271 20 (6 in O.D. x 20 in long) G3 Accessories Valve Kit, 12 VDC - vent valve, adjustable pressure relief 571061 Vent (500-5000 psi, 35-345 bar), pressure gauge, zerk fitting Vent Valve Kit, 24 VDC/90-240 VAC - vent valve, adjustable 571029 pressure relief (500-5000 psi, 35-345 bar), pressure gauge, zerk fitting. Also for G3 Max control AC pumps return to reservoir pressure kit (500-5000 psi, 35571028 Adjustable 345 bar) 571041 G3 pump element kit (adjustable output) G3 Accessories (continued) 571032 Remote manual run kit, 12 VDC 571033 Remote manual run kit, 24 VDC/90-240 VAC Injecto-Flo (EO-1, AO-1, EO-3) Spare Parts and Accessories 556013 EO-1 gear pump 556011 115 VAC replacement motor for Injecto-Flo pumps 556012 230 VAC replacement motor for Injecto-Flo pumps level switch assembly for all 6 and 12 liter Injecto-Flo pump 556016 Low assemblies 556014 Suction strainer for Injecto-Flo pump 563332 24 VDC, 2 Position, 3-Way Pneumatic Solenoid Valve Injecto-Flo II Reservoirs 122911 3 Liter plastic oil reservoir (no cover) 15X748 6 Liter plastic oil reservoir (no cover) LubeMaster Reservoirs 562892 12 pint plastic oil reservoir 562893 20 pint plastic oil reservoir 562894 12 pint metal oil reservoir 562896 12 lb plastic grease reservoir 562897 20 lb plastic grease reservoir 562899 20 lb metal grease reservoir 562895 20 pint metal oil reservoir 562898 12 lb metal grease reservoir LubeMaster Spare Parts and Accessories motor - 1/2 HP, 115/230 VAC, single phase, 60 Hz, 557271 Replacement 1725 RPM motor - 1/2 HP, 230/460 VAC, 3-phase, 60 Hz, 557270 Replacement 1725 RPM motor - 1/2 HP, 115/230 VAC, single phase, 60 Hz, 557272 Replacement 1140 rpm motor - 1/2 HP, 230/460 VAC, 3-phase, 60 Hz, 557273 Replacement 1140 RPM 563380 Replacement pump (no reservoir) Accessories 563921 563916 563915 557713 563179 563184 563384 563385 563316 563317 563322 563016 LubeMaster seal repair kit LubeMaster output manifold kit LubeMaster drive repair kit Pressure gauge; 0-3,000 psi liquid filled Standard blowout oil; 1,450 psi Standard blowout grease; 2,350 psi High pressure blowout switch oil; 1,450 psi High pressure blowout switch grease; 2,350 psi Low level switch, 15 amp, SPDT, for 12 pint oil reservoir Low level switch, 15 amp, SPDT, for 20 pint oil reservoir Low level switch, SPDT, for 12/20 lb. grease reservoir Low level switch, 10 watt, SPST, for 20 pint oil reservoir Low level switch, 15 amp, SPDT, for 12/20 lb grease 564377 reservoir, explosion proof, class 1 groups C & D, class 2 groups E, F, and G 563015 Low level switch, 10 watt, SPST, for 12 pint oil reservoir 563383 Mechanical clutch drive with arm 563388 Mounting Base with 10:1 drive reduction, floor mounting 563386 Mounting Base with 10:1 drive reduction, wall mounting 563389 Mounting Base with 60:1 drive reduction, floor mounting 563387 Mounting Base with 60:1 drive reduction, wall mounting LubriSystem Reservoirs: Pneumatic/Electric 564265 6 pint plastic oil reservoir 562892 12 pint plastic oil reservoir 562893 20 pint plastic oil reservoir 562907 6 lb plastic grease reservoir 562896 12 lb plastic grease reservoir 562897 20 lb plastic grease reservoir 562898 12 lb metal grease reservoir 562899 20 lb metal grease reservoir LubriSystem Reservoirs: Hand Pumps 562904 6 pint plastic oil reservoir 562889 12 pint plastic oil reservoir 562890 20 pint plastic oil reservoir 562905 6 lb plastic grease reservoir 562884 12 lb plastic grease reservoir 562885 20 lb plastic grease reservoir LubriSystem Spare Parts and Accessories 563014 Low level switch for LubriSystem 6 pt oil reservoir, 10 watt 563015 Low level switch for LubriSystem 12 pt oil reservoir, 10 watt 563322 Low level switch for any LubriSystem grease reservoir 563016 Low level switch for LubriSystem 20 pt oil reservoir, 10 watt 563315 115 VAC solenoid valve, for LubriSystem 563332 24 VDC solenoid valve, for LubriSystem standard air operated pump body, 9:1 ratio 563579 LubriSystem (no reservoir) 563580 LubriSystem hand pump body (no reservoir) Maxi-Flo Reservoirs 563930 Electric Maxi-Flo replacement reservoir kit Maxi-Flo Spare Parts/Accessories 557826 Replacement switch, low level 563375 Maxi-Flo relief valve, 600 psi Meter-Flo Reservoirs 564340 30 gallon metal oil reservoir Meter-Flo Replacement Pumps 558949 56 cu. In./min @ 1140 RPM - 84 cu. In./min @ 1725 RPM 557816 76 cu. In./min @ 1140 RPM - 117 cu. In./min @ 1725 RPM 558950 76 cu. In./min @ 1140 RPM - 117 cu. In./min @ 1725 RPM Meter-Flo Replacement Pumps (continued) 558951 111 cu. In./min @ 1140 RPM - 168 cu. In./min @ 1725 RPM 557818 26 cu. In./min @ 1140 RPM - 40 cu. In./min @ 1725 RPM 557819 557820 558955 9 cu. In./min @ 1140 RPM - 14 cu. In./min @ 1725 RPM 161 cu. In./min @ 1140 RPM - 245 cu. In./min @ 1725 RPM 161 cu. In./min @ 1140 RPM - 245 cu. In./min @ 1725 RPM Replacement Motor, 1/4 HP, 115/230VAC, single-phase, 60Hz, 558289 1725 RPM, TENV Paddle Base w/ pump P/N 557814 (no Motor, no 563557 Meter-Flo Reservoir) Paddle Base w/ pump P/N 557813 (no Motor, no 564411 Meter-Flo Reservoir) Motor, 1/4 HP, 230/460VAC, 3-phase, 60Hz, 1725 558290 Replacement RPM, TENV Meter-Flo Spare Parts and Accessories 561063 Meter-Flo paddle base 561067 Mounting bracket, for Meter-Flo paddle base and pump 563303 Coupling for, Meter-Flo paddle base and pump 557067 Coupling guard, for Meter-Flo paddle base and pump 563303 Meter-Flo conversion coupling kit Miniature Meter-Flo Spare Parts and Accessories motor reduction assembly, 14 cu in/min. flow rate (with 564415 Gear pump) motor reduction assembly, 1 cu in/min. flow rate 564412 Gear (with pump) motor reduction assembly, 5 cu in/min. flow rate 564413 Gear (with pump) 557828 High pressure switch, moisture resistant, 324 bar (4700 psi) max 557825 Low level switch 557810 Replacement suction strainer 563558 Relief valve PH Pump Reservoirs 562891 5 pint plastic oil reservoir 562904 6 pint plastic oil reservoir 562889 12 pint plastic oil reservoir 562890 20 pint plastic oil reservoir 562888 5 lb plastic grease reservoir 562905 6 lb plastic grease reservoir 562884 12 lb plastic grease reservoir 562885 20 lb plastic grease reservoir 564264 5 lb metal grease reservoir 562886 12 lb metal grease reservoir PH Pump Spare Parts and Accessories 563160 Automatic 2,500 psi relief valve, for PH pump 563924 PH manual pump body repair kit 557864 Pressure gauge (3000 psi) Thrif-T Luber Reservoirs 564439 Replacement reservoir kit for 115 VAC Thrif-T Luber Thrif-T Luber Spare Parts and Accessories 564065 Replacement Thrif-T Luber pump 557641 Replacement motor for 115 VAC Thrif-T Luber electric pumps 558031 Replacement timer board for 115 VAC Thrif-T Luber timers 564066 Thrif-T Luber low level switch kit 557826 Replacement low level switch 558296 Thrif-T Luber pressure gauge 564053 Thrif-T Luber filters 563162 Thrif-T Luber relief valve, 150 psi 556677 Rubber plug for Thrif-T luber reservoir 561143 TLTP-25, Thrif-T Luber 5/32 in plastic tubing (25 ft) MSA Spare Parts and Accessories 563912 MSA-10 repair kit 563072 Air inlet restrictor valve 563913 MSA-100 repair kit ABOUT GRACO Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service. Working closely with qualified distributors, Graco offers systems, products and technology that set the quality standard in a wide range of fluid handling solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for the contractor industry. Graco’s ongoing investment in fluid management and control will continue to provide innovative solutions to a diverse global market. GRACO LOCATIONS CONTACT AMERICAS EUROPE MAILING ADDRESS MINNESOTA BELGIUM P.O. Box 1441 Minneapolis, MN 55440-1441 Tel: 612.623.6000 Fax: 612.623.6777 Worldwide Headquarters Graco Inc. 88-11th Avenue N.E. Minneapolis, MN 55413 European Headquarters Graco N.V. Industrieterrein-Oude Bunders Slakweidestraat 31 3630 Maasmechelen, Belgium Tel: 32.89.770.700 Fax: 32.89.770.777 ASIA PACIFIC ASIA PACIFIC ASIA PACIFIC JAPAN CHINA KOREA Graco K.K. 1-27-12 Hayabuchi Tsuzuki-ku Yokohama City, Japan 2240025 Tel: 81.45.593.7300 Fax: 81.45.593.7301 Graco Hong Kong Ltd. Shanghai Representative Office Building 7 1029 Zhongshan Road South Huangpu District Shanghai 200011 The People’s Republic of China Tel: 86 21 649 50088 Fax: 86 21 649 50077 Graco Korea Inc. Choheung Bank Building 4th Floor #1599 Gwanyang-Dong, Dongan-Ku, Anyang-Si, Gyunggi-Do, Korea 431-060 Tel: 82(Korea).31.476.9400 Fax: 82(Korea).31.476.9801 All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Graco is certified ISO 9001. Europe +32 89 770 700 FAX +32 89 770 777 WWW.GRACO.COM ©2011 Graco BVBA 340379E Rev.B 06/11. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 5.4-c002 1.000000, 0000/00/00-00:00:00 Format : application/pdf Subject : 340379Eb , Automatic Lubrication Pumps, 340379Eb, Automatic Lubrication Pumps Description (x-repair) : 340379ENEU Automatic Lubrication Pumps Modified : 2013:07:01 11:12:38.219-05:00 Title (x-repair) : 340379ENEU Automatic Lubrication Pumps Modify Date : 2011:08:17 12:03:10-05:00 Metadata Date : 2011:08:17 12:03:10-05:00 Create Date : 2011:08:12 13:55-05:00 Creator Tool : Adobe InDesign CS5 (7.0) Sha 1 : 94250ed9505a72ba7ef51078976ce0973b622d71 Extracted : 2013:07:01 11:12:36.48-05:00 Keywords : 340379Eb , Automatic Lubrication Pumps Producer : Acrobat Distiller 8.2.5 (Macintosh) Instance ID : uuid:f22c5eb7-c353-4dc7-8c39-5e84be1b81fa Document ID : uuid:c09df632-5ceb-5546-b995-f11594538b09 Page Count : 20 Creator : Adobe InDesign CS5 (7.0) Title : 340379ENEU Automatic Lubrication PumpsEXIF Metadata provided by EXIF.tools