4120EC PROGRAMMING FORM Prog

User Manual: 4120EC-prog

Open the PDF directly: View PDF PDF.
Page Count: 2

4120EC PROGRAMMING FORM
DEFAULT VALUES, WHERE APPUCABLE, ARE SHOWN IN BRACKETS [ ]
●OO INSTALLER CODE
●u1 MASTER CODE
❑n(lrl [ENTER&9, [134]
*O2 RESPONSE TYPE (O&lo)
d d b ckl ‘ones
[019] [011] [013] [014]
C&lb6dl ‘ones
[015] [016] [o171 [Opq
*O5 MULTIPLE ALARMS &RESPONSE TYPES
FOR KEYPAD PANICS
mmm
Multiple Alarms 3&#(or C) ●&#(or B)
[010] [ol~ [016]
1st location: 00 =one alarmfper zonelper armed period; 01. multiple
alarms/per zone/per armed period.
2nd &3rd locations: enter response types for keypad panics.
RESPONSE TYPES
00. unusedZone 05= Trouble by dayl Alarm by night
01 =SE #1 C6 =24-hour Silant
02= Not US’d 07= 24-hour Audible
03- Perimetar 08= 24-hour Auxiliary
04 =Interior Follower 09. Fire
●O8 N.O. or N.C. SENSOR LOOP (ZONES 14)
bflflbflflbfl
[1] [1] [1] [1] [1] [1] [1] [1]
O=N.O. Sensor Loop; 1=N.C. Sensor LMp.
●O9 ENTRY DELAY
~X15secsp3C-15)
●1OEXIT DELAY
[0[2] ~X15 S’CSW-15)
[013]
’13 ALARM SOUNDER TIME DURATION
’14
❑
●21
•1
●25
•1
●27
•1
[2]
●29
•1
[1]
’31
ZONE 8RESPONSE TIME
O=Slow, 1=Fast [0]
NO FIRE TIME-OUT
l= Yes, O=No [0]
DISABLE DURESS IN ADEMCO EXPRESS FORMAT
l= Yes, O=No [0]
TEST REPORT INTERVAL
O=No report; 1=12 hrs.; 2=24 hrs.; 3=168 hrs.
QUICK ARM ’30 TOUCH-TONE DIAL
l= Yes, O=No ul. Yes, O. Rotary
[0]
PABX CODE
-—— —
L!-ll_!_J l_!._l L_!_l””’S-F I
●32 SUBSCRIBER #
mmmm
Y33 PRIMARY PHONE #
00-09; B-F
❑nclclnclclmclclclcw
●34 SECONDARY PHONE #
❑lnclclnclclclclclclcl”
’35 CS DOWNLOAD PHONE #
Elclmlnclnclnnclcl”’
’36 CS lD# 00-09; A-F
mlmlmmnlmlnlnl
[115] [115] [115] 115] [115] 115] [1 [5] 1Is]
●4O PROGRAM TAMPER CODE
m~9: 64 [Op]
*4I DISABLE USAGE OF EOLR SUPERV. ON ZONE 1‘
❑I=NoEOLR; O=EOLR supervision [0]
’44 RING DETECT COUNT
l--!-l [010]
00= no ring detect 01-14 for ring counts of 1-1 4; 15 when telephone
answering machine is cwwted to the same phone line.
‘?5
[0]
’48
•1
[0]
*49
❑
●54
•1
*55
•1
[0]
’57
•1
[0]
●59
•1
[1]
*6O
•1
●65
PRIMARY TRANSMISSION FORMAT
0. ADEMCO LO SPEED; 1=RADIONICS; 2=ADEMCO EXPRESS
SECONDARY TRANSMISSION FORMAT
0. ADEMCO LO SPEED; 1=RADIONICS; 2=ADEMCO EXPRESS
CHECKSUM VERIFY
l= Yes, O=No [0]
4+2 ZONE FORMAT SELECTION
1=4+2 Format, O=3+1/4+1 [0]
ALARM REPORT ●56 RESTORE REPORT
0=Standard, 1. Expanded ❑O. Standard,l =Expanded
[1]
BYPASS REPORT ●58 TROUBLE REPORT
O. Standard, 1=Expanded mo= Standard, 1=Expandad
[0]
OPEN/CLOSE REPORT
O. Standard, 1=Expanded
LOW BAT, AC LOSS& TEST REPORT
O=Standard, t . Expended
ALARM REPORTING CODES ASSIGNED
mmmmmmmm
;I)][70] [;0] [fo] [$] [0;:] [~0] Ho]
Enter 01-1 5; 00 =no code repordng
(NOTE: When reporting 4+2 format, 2nd digit is always zone number)
4120EC-PR V3 9/93
WWW.DIYALARMFORUM.COM
●66 ALARM REPORTING CODES ASSIGNED (CONT’D)
mmm (01-15); 00=no channel reporting
Duress 3&?# Panic *& #Panic See Note in ●65
(or C) (or B)
[010] [010] [010]
NON-ALARM CODES
(01-15) AC LOSS
(00 for no AC Loss 2nd Digit
code Trbl
reporting) Trbl Restr
Bypass
Bypass Restr
flstr code for Alrrn,
AC Loss, Lo Bat
●67 “68
I.--u
m
r-i-1
open~ IJ
Close ml
Lo Bat ~
ml L. Bat 2- fJigit m
m‘est m
~Cance’m
Ill
[I
Defaults for above are all 010
HEXADECIMAL TO NUMERIC ENTRY CONVERSION
O=10 (REPORT CODES)
O=00 (SUBS ID, PABX OR CS ID)
1=01 ,2=02, 3=03 ,4=04, 5=05, 6=06 ,7=07, 8=08, 9=09, 6=11, C=12, D=13, E=14 ,F=l 5
●To Enter Program Mode: a) Press [*] and [#] at the same time within 30 seconds after power is applied to the
control, or
b) Enter installer code+ [8]+ [0] +[0]. Enter first field address to begin programming
(e.g., ●O1).
13
I●To Set Standard Defaults: Press ●96 I
I●To Exit Program Mode: Press *99 or ●98: *99 allows re-entry to the programming mode by installer code.
*98 prevents re-entry to programming mode by installer code. I
2NDEMC0
ADIVISION OF PllllVAY CORPORATION
*
4120EC-PR V3 9/93
WWW.DIYALARMFORUM.COM

Navigation menu