44464 Inst

: 44464-Inst 44464-inst images 714 p4dbimg

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Juniper
Entertainment
Assembly Instructions

Riverside
Furniture
email:info@riverside-furniture.com

Page 1 of 2

Made in Viet Nam

Components and Hardware List
Breakfront TV console Large Shelf

1pc.
A
Adjustable Shelf
Support

E

Small Shelf

Shelf support

2pcs. C
4pcs. D
B
Anti-Tip Restraint
Screw #3 x 5/8
Kit (attached to back)

16pcs. F

16pcs. G

4pcs.

44440 Tv Console

Be sure to check all packing material carefully for small
parts, which may have come loose inside the carton
during shipment.

2 pcs.

Note:
1. The four Small Shelves (C) have been installed for shipping. These are secured using the
Screws (F) underneath the shelves. In order to move the Shelves to a different location, using
your Phillips Screwdriver, remove the screws and move the Shelf Pins and Shelves as desired.

2. Install the Wood Shelf Supports (D) into the notches at the sides of the middle section. Place the
Large Shelves (B) onto the Shelf Supports.
The Levelers located underneath the Base can be adjusted if necessary to compensate for uneven
flooring.

Anti-Tip Restraint
Kit
E
F

Step 1

Step 2

Adjustable
Leveler

Riverside

FURNITURE

email:

info@riverside-furniture.com

Page 2 of 2

Anti-Tip Hardware
Installation Instructions

Notice: Riverside Furniture Corp. recommends that steps be taken for certain furniture items to
prevent or minimize the risk of tip-over. This furniture is equipped with Tip-over Restraint
Hardware for use to minimize this risk, if used. Please follow below installation steps. Riverside
Furniture Corp. recommends that parents and guardians periodically visit the U.S. Consumer
Product Safety Commission (CPSC) website at http://www.cpsc.gov/ and stay up to date on all
issues related to children's product safety.

5/8 inch
Screw

Wall Stud

Approximately
2"

2 inch
Screw
Install screws
through the small
hole in brackets
1. Temporarily locate the furniture to near it's final location in the room next to a wall. Locate a
wall stud behind your furniture and also mark the stud's location on the back of your furniture.
2. Firmly attach one bracket to the stud approximately 2" below the top of the furniture with the
2 inch long Wood Screws provided. It may be necessary to drill 3/32 dia. pilot holes for the
screws.
3. Firmly attach the other bracket onto a solid, structural part on the back of the furniture using
the 5/8 inch long Wood Screws. It may also be necessary to pilot bore for these screws.
4. Move the furniture into its final position, taking care to line up the wall bracket with the
furniture bracket. Thread a strap through the bracket as shown in the illustration. Tighten strap
until snug but do not over tighten.
Caution: Riverside Furniture Corp. assumes no liability for improper installation or excessive
loads placed on screws, brackets or straps. Failure to detach this restraint before moving
furniture may result in personal injury and property damage.
Warning: This tip-over restraint is not to be a substitute for proper adult supervision. Do not
allow children to climb on furniture. Items left on top of the TV and furniture, such as toys,
remote controls and treats might tempt young children to climb. Push the TV as far back as
possible from the front of its stand. Place electrical cords out of a child's reach, and teach
children not to play with the cords.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2017:03:17 08:16:19-05:00
Create Date                     : 2017:03:17 08:16:19-05:00
Metadata Date                   : 2017:03:17 08:16:19-05:00
Creator Tool                    : AutoCAD LT 2017 - English 2017 (21.0s (LMS Tech))
Format                          : application/pdf
Title                           : Model
Document ID                     : uuid:a739f769-3fce-47fd-8cd5-2b974694789c
Instance ID                     : uuid:2b4f4fb3-fd26-4703-96a8-5315bcb33474
Producer                        : pdfplot13.hdi 13.00.052.000
Page Count                      : 2
Creator                         : AutoCAD LT 2017 - English 2017 (21.0s (LMS Tech))

EXIF Metadata provided by EXIF.tools