Scrambler 500 2X4 International 457377
User Manual: Scrambler 500 2X4 International
Open the PDF directly: View PDF 
.
Page Count: 35
| Download | |
| Open PDF In Browser | View PDF |
The Power of Knowledge Engineering SKF is your source for a wide range of products c various industries. From automotive to heav industrial applications, SKF offers a solution to k machines operating and your business profitable. www.vsm.skf.com Download literature, access technical tips and view product information For catalog related questions, please email: vsm.updates@skf.com View detailed technical and product videos at www.skfpartsinfo.tv Follow us on Twitter @skfpartsinfo to stay on top of all the latest technical and product information. ® SKF is a registered trademark of the SKF Group. © SKF Group 2014 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. Publication 457377 (rev. 02/14) Printed in U.S.A. Catalog 457377 2014 Supercedes 457377, Dated 2011 Torque specification guide Front & rear axle nut torque specifications for FWD, RWD & 4WD vehicles Instructions One of the most common mistakes during installation is improper torque of the Axle nut. To guarantee the (Bearing, Spindle or Hub) is torqued correctly, follow the manufacture’s installation procedure. Ignoring these important details will reduce the life of your (Bearing, Spindle or Hub). Use a qualified, calibrated torque wrench. Do not use an impact gun to install the axle nut. The impact gun will damage the axle nut. It will also leave your spindle nut under or over torque resulting in hub assembly failure. To ensure that you have the correct torque for the application refer to this guide or contact the vehicle manufactures dealer. It is important that you properly torque the spindle nut to ensure optimum bearing life. Under torque of an axle nut will allow excessive movement causing uneven loading and excessive wear. Over torque of the axle nut will cause excessive load and cause the bearing to overheat, this is one of the most common causes for failures. All replacement hub units are not created equal SKF premium quality hubs vs “Value” grade hubs • Engineered to meet or exceed OE specifications • Reverse engineered to generic specifications • Life expectancy of 100,000+ miles • Typically last about 25% to 35% as long as the OE hub (25,000 to 35,000 miles) • OE sensors assure correct ABS functions • Low quality reproduction sensors can cause ABS system malfunctions • Premium seals, both inboard and outboard, protect the bearing • Reproduction seals selected for price, not performance, quickly subject the bearing to contamination • Precision bearing preload and correct application of advanced manufacturing techniques such as orbital rolling • Imprecise bearing preload and inconsistent manufacturing techniques may lead to poor performance and shortened bearing life • 100% tested to the actual OE specifications per part number for fit, form and function • Tests not performed on all critical areas – defective return rates run 6 to 12 times higher than premium hubs • High quality steel and surface finishes • Inferior quality steel and surface finishes will lead to bearing noise and premature failure • Proper implementation of heat treatment • Heat treatment improperly applied and/or poorly controlled can result in safety issues like a wheel off condition • Precise assembly tolerances • Inconsistent and imprecise assembly tolerances may lead to wheel pulsation Don’t compromise your customer’s vehicle safety. Always install SKF premium quality hubs! Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Acura Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Audi - cont. 1.6EL......................................1997-2005......... 134/182 2.2CL, 2.3CL, 3.0CL ..........1997-1999 ........ 181/245 2.5TL ....................................1995-1998 ........ 181/245 3.2CL ....................................2001-2003 ........ 181/245 3.2TL ....................................1996-2007 ........ 181/245 3.5RL ....................................1996-2004......... 181/245 Integra ..................................1986-2001......... 134/181 IXL 1.5L,2.0L........................2013..................... 133/181 IXL 2.4L.................................2013..................... 181/245 Legend ..................................1991-1995......... 242/335 1986-1990......... 180/244 MDX........................................2007-2013......... 242/329 2003-2006......... 210/285 2001-2002......... 181/245 NSX........................................1991-2005......... — RDX .......................................2013..................... 242/329 2007-2012......... 242/329 RL ..........................................2009-2012......... 242/329 2005-2007......... 242/329 RSX ........................................2002-2006......... 134/181 RSX Type S ...........................2002-2006......... 181/245 SLX ........................................1996-1999......... IUA TL FWD.................................2009-2013......... 242/329 TL AWD.................................2009-2013......... 242/329 TL............................................2008..................... 181/245 2005-2008......... 181/245 TSX ........................................2009-2013......... 242/329 2004-2008......... 181/245 Vigor ......................................1992-1994......... 181/245 ZDX.........................................2010-2013......... 242/329 — 134/181 134/181 134/181 134/181 181/245 134/181 — — 206/285 180/244 181/245 181/245 181/245 242/329 133/181 181/245 181/245 181/245 134/181 134/181 — — 181/245 134/181 134/181 — — 134/181 181/245 AM General H2...........................................2003-2009......... 173/235 H3...........................................2006-2010......... 191/260 — — American Motors AMX........................................1978-1980......... AMB Concord..................................1978-1983......... AMB Eagle......................................1980-1988......... — Gremlin..................................1977-1978......... AMB Matador.................................1977-1978......... AMB Pacer......................................1977-1980......... AMB Spirit.......................................1979-1983......... AMB — — — — — — — Audi 100.........................................1992-1994......... 147/200[30] 100, 200...............................1989-1991......... 147/200[30] 100 Quattro..........................1989-1991......... 147/200[30] 200 Quattro..........................1989-1991......... 147/200[30] 4000......................................1980-1987......... 167/226 4000 Quattro.......................1984-1987......... 203/280 AIA AIA 147/200[30] 147/200[30] AIA 203/280 5000......................................1978-1988......... 202/280 5000 Quattro.......................1984-1988......... 202/280 80...........................................1988-1991......... 195/265 80 Quattro............................1988-1991......... 195/265 90 FWD.................................1992-1995......... 147/200[30] 90 AWD.................................1992-1995......... 81/110[30] 90...........................................1988-1991......... 195/265 90 Quattro............................1992-1995......... 147/200[30] 1988-1991......... 195/265 Allroad Quattro.....................2013..................... [50] 2001-2005......... [31] A3, A3 Quattro.....................2006-2013......... VWH A4, A4 Quattro.....................2008-2013......... [50] 2006-2007......... [51] A4...........................................1996-2005......... [31] A4 Quattro............................1996-2005......... [31] A5...........................................2010-2013......... [50] A5 Quattro............................2008-2013......... [50] A6...........................................2005-2013......... [50] 1998-2004......... [31] 1995-1997......... 147/200[30] A6 Quattro............................2005-2013......... [50] 1998-2004......... [31] 1995-1997......... 147/200[30] A7 Quattro............................2012-2013......... [50] A8...........................................1997-1999......... 140/190[32] A8 Quattro............................2006-2013......... 147/200[45] A8 Quattro............................1997-2005......... 140/190[32] Cabriolet................................1994-1998......... 147/200[30] Coupe.....................................1990-1991......... 195/265 1981-1987......... 167/226 Fox..........................................1976-1979......... 167/226 Q5...........................................2009-2013......... [50] Q7...........................................2007-2013......... [53] RS4.........................................2007-2008......... [51] RS5.........................................2013..................... [50] RS6.........................................2003-2004......... [31] R8...........................................2008-2013......... [111] S4...........................................2008-2013......... [50] 2006-2007......... [51] 2000-2005......... [31] S4 Quattro............................2000-2005......... [31] S4 FWD.................................1992-1994......... 147/200[30] S4 AWD.................................1992-1994......... 147/200[30] S5...........................................2008-2013......... [50] S6...........................................2007-2013......... [50] S6 Quattro............................2002-2013......... [31] S6 FWD.................................1995..................... 147/200[30] S6 AWD.................................1995-1997......... 147/200[30] S7...........................................2013..................... [50] [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 AIA — AIA 236/320 AIA 89/120[30] AIA 177/240 236/320 [50] [31] VWH [50] 147/200[45] AIA 85/115[32] [50] [50] — — AIA [50] [31] 147/200[30] [50] — 147/200[45] 140/190[32] AIA AIA AIA AIA [50] [53] [50] [50] [31] [50] [50] 147/200[45] AIA 85/115[32] AIA 147/200[30] [50] [50] [31] AIA 147/200[30] [50] 3 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Audi - cont. Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm BMW - cont. S8...........................................2013..................... 147/200[45] 2007-2009......... [50] 2001-2003......... 140/190[32] S7...........................................2013..................... [50] TT AWD.................................2007-2013......... VWH 2000-2005......... [33] TT FWD.................................2007-2010......... VWH 2000-2005......... [33] V8 Quattro............................1990-1994......... 147/200[30] 147/200[45] [50] 140/190[32] [50] VWH [33] 129/175 147/200[30] BMW Active Hybrid 3.....................2013..................... — Active Hybrid 5.....................2013..................... — Active Hybrid 7.....................2013..................... — M Coupe, Roadster .............1998-2002......... — M3 .........................................2008-2013......... — 1995-2006......... — 1988-1991......... M5 .........................................2013..................... — 2006-2010......... — 2000-2003......... — 1991-1993......... — M6 ........................................2012-2013......... — M6 Coupe, Convertible ......2006-2010......... — X1............................................2013..................... — X3 ..........................................2011-2013......... 155/210 [44][113] 2004-2010......... 310/420 X5 ..........................................2000-2013......... 310/420 X6............................................2008-2013......... 310/420 Z3 ...........................................1997-2002......... — Z4 ...........................................2009-2013......... — 2003-2008......... — Z8 ...........................................2000-2003......... — 1 Series.................................2012-2013......... — 2008-2011......... — 1M Series..............................2011..................... — 3 Series AWD (E92,E93)...2012-2013......... 310/420 3 Series AWD (F30)............2012-2013......... 155/210[44] 3 Series RWD (E92,E93)...2012-2013......... — 3 Series RWD (F30)............2012-2013......... — 3 Series AWD ......................2008-2011......... 310/420 2006-2007......... 310/420 2000-2005......... 310/420 1985-1992......... 184/250 4 Make/ Model 107/145 [114] 74/100 [84][114] 74/100 [84][114] [40] 221/300[92] [40] 147/200 [115] 310/420 221/300 214/290 [115] 310/420 155/210 [44][113] 74/100 [55][114] 221/300 310/420 310/420 [40] 184/250 221/300 221/300 [92][101] [54][92] [92][101] [101] 107/145[27] [101] 107/145[27] [46] [46] [40] [40] 3 Series RWD ......................2008-2011......... — 2006-2007......... — 1985-2005......... 214/290 5 Series AWD (F07/F10)...2010-2013......... 155/210[44] 5 Series AWD (E60)............2004-2010......... 221/300 5 Series AWD (E61)............2006-2010......... 310/420 5 Series RWD (F07/F10)...2010-2013......... — 5 Series RWD (E60)............2004-2010......... — 5 Series RWD (E61)............2006-2010......... — 5 Series RWD ......................1997-2003......... — 1988-1995......... — 1985-1987......... — 6 Series AWD.......................2012-2013......... 155/210 [44][113] 6 Series RWD.......................2012-2013......... — 6 Series.................................2004-2010......... — 7 Series AWD.......................2010-2013......... 155/210 [44][92] 7 Series RWD.......................2009-2013......... — 2002-2008......... — 1988-1994......... — 1985-1987......... — 7 Series ................................2002-2007......... — 1995-2001......... — 8 Series ................................1994-1997......... — [54][92] [46] [40] 74/100[84] 310/420 310/420 [115] 310/420 310/420 221/300 214/290 188/260 74/100 [55][114] [115] 310/420 74/100 [55][92] [115] 310/420 214/290 188/260 310/420 221/300 214/290 Buick Allure .....................................2005-2009......... 118/160 Century .................................2001-2005......... 118/160 1998-2000......... 159/216 1997..................... 151/205 1996..................... 107/145 1992-1995......... 103/140[4] 1983-1991......... 185/260 1982..................... 225/290 1976-1981......... GMA Electra ...................................1985-1990......... 185/260 1980-1984......... GMA Enclave..................................2008-2013......... 173/235 Encore....................................2013..................... 37/50[82] Estate Wagon ......................1980-1990......... GMA LaCrosse AWD......................2010-2013......... GMS LaCrosse FWD.....................2010-2013......... GMS LaCrosse ...............................2005-2009......... 118/160 LeSabre ................................1998-2005......... 118/160 1992-1997......... 107/145 1986-1991......... 185/260 1980-1985......... GMA Lucerne ................................2006-2011......... 118/160 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — — — — — — — — — — — 151/205 — — GMS — — — — — — — Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Buick - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Cadillac - cont. Park Avenue .........................1998-2005......... 118/160 1992-1997......... 107/145 1991..................... 185/260 Rainer ...................................2004-2007......... 103/140 Reatta ...................................1988-1991......... 180/244 Regal .....................................2011-2013......... GMS 2001-2004......... 118/160 1998-2000......... 159/215 1995-1997......... 151/205 1988-1994......... 184/250 1980-1987......... GMA Rendezvous .........................2007..................... 192/260 2002-2006......... 192/260 Riviera ...................................1999..................... 118/160 1995-1998......... 107/145 1986-1993......... 183/248 1980-1985......... 175/240 Roadmaster .........................1991-1996......... GMA Skyhawk ...............................1982-1988......... 185/260 1980..................... GMA Skylark ..................................1998..................... 74/100[3] 1983-1997......... 185/260 1980-1982......... 225/290 Somerset ..............................1985-1987......... 185/260 Terraza ..................................2005-2007......... 118/160 Verano....................................2012-2013......... GMS — — — — — — — — — — — — 192/260 — — — — — — — — — — — — — Cadillac Allante ...................................1993..................... 110/145 1987-1992......... 183/245 ATS.........................................2013..................... 184/250 Brougham ............................1977-1992......... GMA Calais......................................1976..................... GMC Catera ...................................1997-2001......... 236/320 Cimarron ..............................1982-1988......... 185/260 CTS, CTS Sport Wagon RWD w/o RPOJ56............2010-2013......... — CTS, CTS Sport Wagon RWD w/ RPOJ56..............2010-2013......... — CTS, CTS Sport Wagon AWD....................................2010-2013......... 158/215 CTS RWD..............................2008-2009......... — CTS AWD...............................2008-2009......... 158/215 CTS ........................................2003-2007......... — Concours Deville..................1997-1999......... 118/160 1994-1996......... 107/145 — — 184/250 — — — — 170/230 158/215 158/215 158/215 158/215 118/160 — — Deville ...................................2000-2005......... [5] 1997-1999......... 118/160 1992-1996......... 107/145 1985-1991......... 180/244 1980-1984......... GMA 1977-1984......... GMA 1976..................... GMC DTS ........................................2008-2011......... [56] 2006-2007......... [5] Eldorado ...............................1997-2002......... 118/160 1993-1996......... 107/145 1992..................... 110/145 1986-1991......... 180/244 1979-1985......... 176/238 1976-1978......... 110/145 Escalade 2WD .....................2007-2013......... — 2002-2006......... 177/240 Escalade AWD .....................2007-2013......... 177/240 2002-2006......... 177/240 Escalade 4WD .....................1999-2000......... 165/225 Escalade ESV .......................2007-2013......... 177/240 2003-2006......... 177/240 Escalade EXT 2WD ............2007..................... — 2002-2006......... — Escalade EXT 4WD ............2007-2013......... 177/240 2002-2006......... 177/240 Fleetwood ............................1993-1996......... GMA 1992..................... 107/145 1985-1991......... 180/244 1977-1984......... GMA 1976..................... GMC Limousine ............................1977-1984......... GMA Seville ....................................1997-2004......... 118/160 1993-1996......... 107/145 1992..................... 110/145 1986-1991......... 180/244 1980-1985......... 176/238 1977-1979......... GMA SRX.........................................2012-2013......... 184/250 2010-2011......... 184/250 2008-2009......... 159//215 2004-2007......... 118/160 STS RWD .............................2005-2011......... 118/160 STS AWD .............................2005-2011......... — XLR ........................................2004-2009......... — XTS.........................................2013..................... GMS — — — — — — — [79] [79] — — — — — — — GMQ[15] — GMQ[15] GMD[15] — GMQ[15] — GMQ[15] — GMQ[15] — — — — — — — — — — — — GMS 184/250 170/230 118/160 118/160 118/160 151/205 GMS Chevrolet Aveo, Aveo 5.........................2004-2011......... 221/300 Bel Air.....................................1980..................... GMA Beretta ..................................1987-1996......... 185/260 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 148/190 — — 5 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Chevrolet - cont. Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Chevrolet - cont. Camaro .................................2010-2013......... — 1993-2002......... — 1980-1992......... GMA Caprice ..................................2012-2013......... — 1980-1996......... GMA Cavalier .................................2002-2005......... 148/200 1998-2001......... 144/195 1982-1997......... 185/260 Celebrity ................................1983-1990......... 185/260 1982..................... 225/290 Chevette ...............................1980-1987......... GMA Citation .................................1983-1985......... 185/260 1980-1982......... 225/290 Classic....................................2004-2005......... [57] Cobalt ....................................2009-2010......... [58] 2005-2008......... 155/210 Corsica ..................................1987-2006......... 185/260 Corvette ................................2006-2013......... — 1997-2005......... — 1984-1996......... — 1980-1983......... GMA Cruze......................................2011-2013......... [70] HHR........................................2006-2011......... 155/210 El Camino .............................1980-1987......... GMA Impala ...................................2003-2013......... 155/210 2001-2002......... 118/160 2000..................... 159/215 1980-1996......... GMA Lumina .................................1998-2001......... 159/216 1995-1997......... 151/205 1990-1994......... 184/250 Lumina APV .........................1995-1996......... 104/145 1990-1994......... 185/260 Malibu....................................2013..................... GMS 2004-2012......... 159/215 1997-2003......... [34] 1980-1983......... GMA Malibu Maxx ........................2004-2007......... 159/215 Metro ....................................1998-2001......... 129/175 Monte Carlo .........................2003-2007......... 118/160 2001-2002......... 118/160 1998-2000......... 159/215 1995-1997......... 151/205 1980-1988......... GMA Monza ...................................1980..................... GMA Nova ......................................1985-1988......... 137/186 Orlando..................................2013..................... GMS Prizm .....................................1998-2000......... 166/225 Spark......................................2013..................... 177/240 Spectrum .............................1985-1988......... 137/186 6 Make/ Model 199/270 — — 100 — — — — — — — — — — — — — 151/205 118/160 164/223 100/130 — — — — — — — — — — — — — — — — — — — — — — — — 90/123 — — 140/190 IUC Sprint ....................................1989-1991......... 125/179 1985-1988......... 151/210 Sonic......................................2012-2013......... [48] Uplander ...............................2008-2009......... 118/160 2005-2007......... 118/160 Venture .................................2002-2005......... 118/160 1998-2001......... 118/160 1997..................... 151/205 Volt..........................................2011-2013......... [70] 125/179 62/100 — — 192/260 192/260 — — — Chevrolet / GMC Trucks Acadia FWD .........................2007-2013......... 173/235 Acadia AWD .........................2007-2013......... 173/235 Astro.......................................1985-1989......... GMA Astro AWD ...........................1996-2005......... 147/200 Astro 2WD ...........................2003-2005......... — 1990-2002......... GMA Astro 4WD ...........................1990-1995......... 180/244 Avalanche 2WD ..................2002-2013......... — Avalanche 4WD ..................2002-2013......... 177/240 Blazer 2WD..........................1992-1994......... GMA 1980-1987......... GMA 1976-1978......... GMA Blazer R/V 2WD..................1988-1991......... GMA Blazer 4WD..........................1992-1994......... 165/225 1988-1991......... GMM[12] GML[13] 1980-1987......... GMM[12] GML[13] 1979..................... GMN 1976-1978......... GMN Caballero................................1980-1987......... GMA Canyon 2WD .......................2004-2012......... — Canyon 4WD .......................2004-2012......... 191/260 Captiva Sport........................2012-2013......... 151/205[75] Colorado 2WD .....................2004-2012......... — Colorado 4WD .....................2004-2012......... 191/260 C10, C1500 2WD Pickup ................................1976-1986......... GMA C1500 2WD Pickup ...........1997-2000......... GMA 1988-1996......... GMA C20, C2500 2WD Pickup ................................1979-1986......... GMA C2500 2WD Pickup ...........1997-2000......... GMA 1988-1996......... GMA [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — 118/160 — — — — — — — — — — — — — — — — — — — — 151/205[75] — — — — — GMI[15] GMJ[11] GMD GMF Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Chevrolet / GMC Trucks - cont. C3500 2WD Pickup ...........1997-2000......... GMA 1994-1996......... GMA 1991-1993......... GMA 1988-1990......... GMA C30, C3500 2WD Pickup ................................1979-1986......... GMA 1976-1978......... GMA Denali ....................................2007..................... 177/240 2004-2006......... 173/235 Denali 2WD .........................2001-2003......... — 1999-2000......... GMA Denali 4WD .........................2001-2003......... 155/210 1999-2000......... 165/225 El Camino..............................1980-1987......... GMA Envoy 2WD...........................2002-2007......... 103/140 Envoy 4WD...........................1999-2007......... 103/140 Equinox..................................2007-2013......... 151/205 2005-2006......... 151/205 G10, G1500 Van..................1992-1996......... GMA 1988-1991......... GMA 1979-1987......... GMA G1500 Van............................2003-2012......... — 2001-2002......... GMA 1998-2000......... GMA 1996-1997......... GMA G1500 Van AWD..................2007..................... 155/210 2003-2006......... 173/235 G20, G2500 Van..................1992-1996......... GMA 1988-1991......... GMA 1976-1987......... GMA G2500 Van............................2003-2013......... — 2001-2002......... GMA 1998-2000......... GMA 1996-1997......... GMA G30, G3500 Van..................1992-1996......... GMA 1988-1991......... GMA 1983-1987......... GMA 1979-1982......... GMA Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Chevrolet / GMC Trucks - cont. GMD[15] GME[14] GMF[15] GME[14] GMF[15] GMG[7] GMF[15] GMG[7] GMI[15] GMJ[11] GMJ — GMQ[15] GMQ[15] GMD[15] GMQ[15] GMD[15] — — — 151/205 81/110 — — — — — — — — — — — — GMQ[15] GMQ[15] GMD GMF GMF GMG[7] GMI[8] GMI[15] GMG[7] GMJ[11] GMJ[15] GMH[7] GMJ[11] G3500 Van............................2003-2013......... — 2001-2002......... GMA 1998-2000......... GMA 1996-1997......... GMA G4500 Van............................2012-2013......... — H1500,H2500 Van AWD...2003-2013......... 155/210 HHR........................................2006-2007......... 155/210 Jimmy 2WD..........................1988-1991......... GMA 1979-1987......... GMA 1976-1978......... GMA Jimmy 4WD..........................1988-1991......... GMM[12] GML[13] 1980-1987......... GMM[12] GML[13] 1979..................... GMN 1976-1978......... GMN K10, K1500 4WD Pickup.................................1980-1986......... GMM[12] GML[13] K1500 4WD Pickup............1991-2000......... 165/225 1988-1990......... 175/235 K20, K2500 4WD Pickup.................................1980-1986......... GMM[12] GML[13] K2500 4WD Pickup............1997-2000......... 165/225 1991-1996......... 165/225 1988-1990......... 175/235 K3500 4WD Pickup............1997-2000......... 165/225 1994-1996......... 165/225 1991-1993......... 165/225 1988-1990......... 175/235 K30, K3500 4WD Pickup.................................1983-1986......... GMM[12] GML[13] 1980-1982......... GMM[12] GML[13] LUV Pickup 2WD.................1976-1982......... GMA LUV Pickup 4WD.................1980-1982......... — R10, R1500 2WD Pickup.................................1987-1991......... GMA R20, R2500 2WD Pickup.................................1987-1991......... GMA R30, R3500 2WD Pickup.................................1987-1991......... GMA [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 GMQ[15] GMQ[15] GMD GMF GMQ[15] — — — — — — — — — — — — — — GMI[15] GMJ[11] GMD GMF GMF GMD[15] GME[14] GMF[15] GME[14] GMF[15] GME[14] GMF[15] GME[14] GMI[15] GMG[7] GMJ[11] GMI[15] GMH[7] GMJ[11] — — GMI GMI GMG[7] GMI[8] 7 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Chevrolet / GMC Trucks - cont. S Blazer, Jimmy 2WD.........1982-2003......... GMA S Blazer, Jimmy 4WD.........1997-2005......... 103/140 S Blazer, Jimmy, Typhoon, Syclone 4WD...1986..................... 181/245 S Blazer, Jimmy 4WD.........1982-1985......... 174/235 S10, Sonoma, S15 2WD...1982-2004......... GMA S10, Sonoma, S15 4WD...1997-2004......... 103/140 1986-1996......... 180/244 1982-1985......... 174/235 Safari .....................................1985-1989......... GMA Safari 2WD ..........................2003-2005......... — 1990-2002......... GMA Safari AWD ..........................1996-2005......... 147/200 Safari 4WD ..........................1990-1995......... 180/244 Sierra, Silverado 2WD........2010-2013......... — 1999-2009......... — Sierra, Silverado 4WD........2010-2013......... 188/255 1999-2009......... 177/240 SSR.........................................2004-2006......... — Suburban 2WD....................2000-2013......... — 1997-1999......... GMA 1992-1996......... GMA 1988-1991......... GMA 1979-1987......... GMA Suburban 4WD....................2000-2013......... 177/240 1997-1999......... 165/225 1992-1996......... 165/225 1988-1991......... GMM[12] GML[13] 1980-1987......... GMM[12] GMM[13] Tahoe, Yukon 2WD .............1998-2013......... — 1997..................... GMA 1995-1996......... GMA Tahoe, Yukon 4WD .............1998-2013......... 177/240 1997..................... 165/225 1995-1996......... 165/225 Terrain....................................2010-2013......... 151/205 Tracker ..................................1999-2004......... 159/216 1998..................... 155/210 TrailBlazer 2WD ..................2002-2009......... — TrailBlazer 4WD ..................2002-2009......... 103/140 Traverse FWD.......................2009-2013......... 173/235 Traverse AWD.......................2009-2013......... 173/235 V10, V1500 4WD Pickup ................................1987-1991......... GMM[12] GML[13] V20, V2500 4WD Pickup ................................1987-1991......... GMM[12] GML[13] 8 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Chevrolet / GMC Trucks - cont. — — — — — — — — — — — — — GMQ[15] GMQ[15] GMQ[15] GMQ[15] — GMQ[15] GMD GMF GMI GMI[15] GMQ[15] GMD GMF GMI GMI[15] GMJ[11] GMQ[15] — — GMQ[15] — — 151/205 — — — — 151/205 GMI GMI V30, V3500 4WD Pickup ................................1987-1991......... GMM[12] GMM[13] Yukon XL 2WD ....................2001-2013......... — 2000..................... — Yukon XL 4WD ....................2001-2013......... 177/240 2000..................... 177/240 GMG[7] GMI[8] GMQ[15] GMD GMQ[15] GMD Chrysler All ...........................................1980-1981......... CRA 200.........................................2011-2013......... 118/160 300 RWD .............................2005-2013......... — 300 AWD .............................2005-2013......... 157/213 300M ....................................2001-2004......... 105/142 1999-2000......... 120/163 Aspen RWD..........................2007-2009......... — Aspen 2WD .........................2007..................... — Aspen 4WD .........................2007-2009......... 185/251 Cirrus ....................................2000..................... 105/142 1995-1999......... 180/244 Concorde ..............................2001-2004......... 105/142 1995-2000......... 120/163 1993-1994......... 80/108 Conquest ..............................1987-1989......... CRB Cordoba ................................1982-1983......... CRA Crossfire.................................2004-2008......... — Daytona ................................1984-1993......... 180/244 Dynasty .................................1988-1993......... 180/244 E Class ..................................1983-1984......... 180/244 Fifth Ave ................................1990-1993......... 180/244 1982-1989......... CRA Imperial ................................1990-1993......... 180/244 1982-1983......... CRA Intrepid..................................2001-2004......... 105/142 1995-2000......... 120/163 1993-1994......... 80/108 Laser .....................................1984-1986......... 180/244 LeBaron ................................1982-1995......... 180/244 LHS .......................................2001..................... 105/142 1995-2000......... 120/163 1994..................... 80/108 New Yorker ...........................1995-1996......... 120/163 1994..................... 80/108 1983-1993......... 180/244 1982..................... CRA Newport ...............................1982-1987......... CRA Pacifica ..................................2004-2008......... 180/244 PT Cruiser ............................2001-2010......... 180/244 Prowler .................................2001-2002......... — [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — — 157/213 157/213 124/168 124/168 — — — 185/250 185/250 124/168 124/168 125/170 — — 164/220 CRC CRC CRC CRC — CRC — 124/168 124/168 125/170 CRC CRC 124/168 124/168 125/170 124/168 125/170 CRC — — 180/244 160/217 105/141 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Chrysler - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Dodge / Plymouth - cont. Sebring Convertible ...........2008-2010......... 97/132 2001-2006......... 110/150 2000..................... 105/142 1996-1999......... 180/244 Sebring Coupe ....................1995-2005......... 167/226 Sebring Sedan ....................2007-2010......... 97/132 2001-2006......... 110/150 TC ...........................................1989-1991......... 180/244 Town & Country ..................2008-2013......... 118/244 2005-2007......... 180/244 Town & Country AWD ........1999-2004......... 180/244 1990-1998......... 180/244 Town & Country FWD ........1999-2004......... 180/244 1990-1998......... 180/244 Voyager AWD ......................2000-2003......... 180/244 Voyager FWD ......................2000-2003......... 180/244 181/245 185/250 185/250 185/250 — — 185/250 — — — 180/244 — — CRC 180//244 — Daewoo Lanos ....................................2000-2002......... DAA 1999..................... DAA Leganza ................................2001-2002......... DAE 1999-2000......... DAA Nubira ...................................2001-2002......... DAA 1999-2000......... DAA DAB DAC 207/280 210/285 DAD DAD Daihatsu Charade.................................1988-1992......... 148/201 Rocky......................................1990-1992......... DHA 144/106 — Dodge / Plymouth 024, TC3 ..............................1980-1982......... 180/244 400.........................................1982-1983......... 180/244 600.........................................1982-1988......... 180/244 Aries.......................................1981-1989......... 180/244 Arrow.....................................1976-1980......... CRB Aspen.....................................1978-1980......... CRA Avenger ................................2009-2013......... 118/160 1995-2000......... 167/226 Avenger AWD.......................2008..................... 118/160 Breeze ...................................2000..................... 105/142 1996-1999......... 180/244 Caliber....................................2010-2012......... 180/244 Caliber AWD .........................2007-2009......... 181/245 Caliber FWD .........................2007-2009......... 181/245 Caravan AWD.......................1999-2004......... 180/244 1990-1998......... 180/244 Caravan FWD ......................1999-2007......... 180/244 1990-1998......... 180/244 Caravan, Voyager ................1984-1989......... 180/244 Caravelle................................1982-1988......... 180/244 Cargo Van..............................2012..................... 118/160 CRC CRC CRC CRC — — — — 118/160 185/250 185/250 — 181/245 — 180/244 — — CRC CRC CRC — Challenger ............................2008-2013......... 184/250 1978-1983......... CRB Champ...................................1979-1982......... 167/226 Charger AWD .......................2007-2013......... 157/213 Charger RWD ......................2007-2013......... 152/207 Charger .................................2006..................... 184/250 1982-1987......... 180/244 1978-1979......... CRA Colt ........................................1993-1994......... 167/226 1989-1992......... 167/226 1985-1988......... 167/226 1979-1984......... 167/226 1976-1980......... CRB Conquest ..............................1984-1986......... CRB Dart........................................2013..................... 148/200[95] Daytona ................................1984-1993......... 180/244 Diplomat................................1977-1989......... CRA Dynasty .................................1988-1993......... 180/244 Grand Caravan.....................2008-2013......... 118/160 2005-2007......... 180/244 Grand Caravan, Grand Voyager AWD........1999-2004......... 180/244 1990-1998......... 180/244 Grand Caravan, Grand Voyager FWD........1999-2004......... 180/244 1990-1998......... 180/244 Grand Caravan, Grand Voyager CRC..........1988-1989......... 180/244 Grand Fury............................1977-1989......... CRA Horizon..................................1978-1990......... 180/244 Intrepid .................................2001-2004......... 105/142 1995-2000......... 120/163 1993-1994......... 80/108 Journey AWD.......................2009-2013......... 97/132 Journey FWD.......................2009-2013......... 97/132 Lancer ...................................1985-1989......... 180/244 Laser 4WD ...........................1990-1994......... 167/226 Laser FWD ...........................1990-1994......... 167/226 Magnum AWD ....................2005-2008......... 157/213 Magnum RWD ....................2005-2008......... 184/250 Magnum................................1978-1979......... CRA Mini Ram Van.......................1984-1988......... 180/245 Mirada ...................................1980-1983......... CRA Monaco .................................1990-1992......... 181/245 Neon .....................................2000-2005......... 180/244 1996-1998......... 135/183 1995..................... 150/203 Neon SRT-4 ........................2003-2005......... 180/244 Omni.......................................1980-1990......... 180/244 Prowler .................................1997-2000......... — Rampage, Scamp ...............1982-1984......... 180/244 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 157/213 — CRB 157/213 157/213 157/213 CRC — 130/180 127/175 90/125 CRB — — 129/175 CRC — CRC — — 180/244 — — CRC — CRC 124/168 124/168 125/170 181/245 CRC 138/190 166/225 157/213 157/213 — — — 123/167 160/217 160/217 160/217 160/217 CRC 105/141 — 9 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Dodge / Plymouth - cont. Shadow, Sundance ............1987-1994......... 180/244 Spirit.......................................1989-1995......... 180/244 St. Regis ...............................1980-1981......... CRA Stealth AWD ........................1991-1996......... 166/225 Stealth FWD ........................1991-1996......... 166/225 Stratus Coupe .....................2001-2005......... 167/226 Stratus Sedan ..................... 2001-2006........ 110/150 2000..................... 105/142 1995-1999......... 180/244 TC3.........................................1980-1982......... 180/244 Turismo..................................1982-1987......... 180/244 Viper ......................................1997-2006......... — Vista ......................................1992-1994......... 167/226 Vista 4WD ............................1984-1991......... 165/224 Vista FWD ............................1984-1991......... 165/224 Volare.....................................1978-1980......... CRA Voyager AWD........................1999-2000......... 180/244 1990-1998......... 180/244 Voyager FWD.......................1999-2000......... 180/244 1990-1998......... 180/244 Voyager..................................1984-1989......... 180/244 B150 Van .............................1985-1993......... DTB B150 Van .............................1981-1984......... DTB B1500 Van ...........................2002-2003......... DTK 1994-2001......... DTB B200 Van .............................1980..................... DTB B250 Van .............................1985-1993......... DTB 1981-1984......... DTB B2500 Van ...........................2002-2003......... DTK 1994-2001......... DTB 1994-1998......... DTB B300 Van .............................1980..................... DTB B350 Van .............................1985-1993......... DTB 1981-1984......... DTB B3500 Van ...........................2002-2003......... DTK 1994-2001......... DTB D100, D150 2WD Pickup ......................1985-1993......... DTB 1980-1984......... DTB 10 Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Dodge / Plymouth Trucks - cont. CRC CRC — 203/280 166/225 — 185/250 185/250 185/250 CRC CRC 190/258 166/225 — CRB — 180/244 CRC — — CRC Dodge / Plymouth Trucks Arrow 2WD...........................1979-1980......... CRD Arrow 4WD...........................1979-1980......... DTF B100 Van .............................1980..................... DTB Make/ Model — — DTE[17] DTD[18] DTD DTE[17] DTD[18] DTC DTC DTE[17] DTD[18] DTD DTE[17] DTD[18] DTC DTC DTC DTE[17] DTD[18] DTD DTE[17] DTD[18] DTC DTC D200 2WD Pickup .............1980..................... DTB D250 2WD Pickup .............1985-1993......... DTB 1981-1984......... DTB D300 2WD Pickup .............1980..................... DTB D350 2WD Pickup .............1985-1993......... DTB 1981-1984......... DTB Dakota 2WD.........................2005-2011......... — 1997-2004......... 185/251 1987-1996......... DTB Dakota 4WD.........................2005-2011......... 185/251 1997-2004......... 173/235 1987-1996......... 190/258 Durango 2WD......................2011-2013......... — 1997-2010......... — Durango 4WD......................2011-2013......... 229/310 1997-2010......... 185/251 Nitro 2WD.............................2007-2011......... — Nitro 4WD.............................2007-2011......... 100/135 Raider.....................................1987-1989......... DTF Ram 1500 Pickup...............2006-2013......... 2WD w/Indep Susp......................................... — 4WD w/Indep Susp......................................... 185/251 2003-2007......... 2WD w/Link/Coil Susp................................... — 4WD w/Link/Coil Susp................................... 263/356 2003-2005......... 2WD w/Indep Susp......................................... — 4WD w/Indep Susp......................................... 185/251 2000-2002......... — 2WD................................................................... 185/251 4WD................................................................... 180/244[16] 1996-1999......... DTA 2WD................................................................... — 4WD................................................................... 175/237[16] 1994-1995......... DTA 2WD................................................................... — 4WD................................................................... 180/244[16] Ram 2500 Pickup...............2013..................... 4WD w/Link/Coil Susp................................... [38] 2010-2012......... 2WD w/Link/Coil Susp................................... — 2WD w/Link/Coil Susp................................... — 4WD w/Link/Coil Susp................................... [38] 4WD w/Link/Coil Susp................................... [38] DTD DTE[17] DTD[18] [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 DTE[17] DTD[18] DTD[18] DTE[17] DTD[18] DTE[17] DTD[18] DTD DTD DTE — — — — — — — — — — — — — — — — — DTL[9] DTL[9] — DTC DTC DTC — DTC DTC — DTC DTL[9] DTL[9] DTM[2] DTL[9] DTM[2] Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Make/ Model Year Front proc. or torque ft-lbs/Nm Dodge / Plymouth Trucks - cont. Dodge / Plymouth Trucks - cont. Ram 2500 Pickup - cont. Ram 3500 Pickup - cont. 2008-2009......... 2WD w/Indep Susp......................................... — 2WD w/Indep Susp......................................... — 2WD w/Link/Coil Susp................................... — 2WD w/Link/Coil Susp................................... — 4WD w/Indep Susp......................................... 185/251 4WD w/Indep Susp......................................... 185/251 4WD w/Link/Coil Susp................................... 263/356 4WD w/Link/Coil Susp................................... 263/356 2006-2007......... 2WD w/Link/Coil Susp................................... — 2WD w/Indep Susp......................................... — 4WD w/Link/Coil Susp................................... 263/356 4WD w/Indep Susp......................................... 185/251 2003-2005......... 2WD w/Link/Coil Susp................................... — 2WD w/Indep Susp......................................... — 4WD w/Link/Coil Susp................................... [38] 4WD w/Indep Susp......................................... 185/251 2000-2002......... 280/380 2WD................................................................... 280/380 4WD................................................................... 180/244[16] 1996-1999......... DTA 2WD................................................................... DTA 4WD................................................................... 175/237[16] 1994-1995......... DTA 2WD................................................................... DTA 4WD................................................................... 180/244[16] Ram 3500 Pickup...............2013..................... 4WD w/Link/Coil Susp................................... [38] 2010-2012......... 2WD w/Link/Coil Susp................................... — 2WD w/Link/Coil Susp................................... — 4WD w/Link/Coil Susp................................... [38] 4WD w/Link/Coil Susp................................... [38] 2008-2009......... 2WD w/Indep Susp......................................... — 2WD w/Indep Susp......................................... — 2WD w/Link/Coil Susp................................... — 2WD w/Link/Coil Susp................................... — 4WD w/Indep Susp......................................... 185/251 4WD w/Indep Susp......................................... 185/251 4WD w/Link/Coil Susp................................... 263/356 4WD w/Link/Coil Susp................................... 263/356 2006-2007......... 2WD w/Link/Coil Susp................................... — 2WD w/Indep Susp......................................... — 4WD w/Link/Coil Susp................................... 263/356 4WD w/Indep Susp......................................... 185/251 DTL[9] DTM[2] DTL[9] DTM[2] DTL[9] DTM[2] DTL[9] DTM[2] DTL[9] DTL[9] DTL[9] DTL[9] DTL[9] DTL[9] DTL[9] DTL[9] DTC DTC DTC DTC DTC DTC DTC DTC DTC 2000-2002......... 2WD................................................................... 280/380 4WD................................................................... 180/244[16] 1996-1999......... 2WD................................................................... DTA 4WD................................................................... 175/237[16] 1994-1995......... 2WD................................................................... DTA Ram 4500,5500.................2008-2013......... [49] 2008-2013......... — 2008-2013......... — Ram 50 Pickup 2WD..........1981-1993......... CRD Ram 50 Pickup 4WD..........1981-1993......... DTF Ramcharger, Trailduster 4WD....................................1980-1993......... DTG Ramcharger, Trailduster 2WD....................................1979-1993......... DTB Sprinter, Dual Rear Wheels, Inner Hub Nut...2004-2010......... — Sprinter, Dual Rear Wheels, Outer Hub Nut...2004-2010......... — Sprinter, Single Rear Wheels................................2004-2010......... — W100, W150 4WD Pickup.......................1985-1993......... DTG 1980-1984......... DTG W200 HD 4WD Pickup......1980..................... DTI W200 LD 4WD Pickup.......1980..................... DTG DTL[9] DTL[9] DTM[2] DTL[9] DTM[2] DTL[9] DTM[2] DTL[9] DTM[2] DTL[9] DTM[2] DTL[9] DTM[2] DTL[9] DTL[9] DTL[9] DTL[9] W250 HD 4WD Pickup......1985-1993......... DTG 1981-1984......... DTG W250 LD 4WD Pickup.......1992-1993......... DTH 1985-1991......... DTI 1981-1984......... DTI W300 4WD Pickup.............1980..................... DTI W350 4WD Pickup.............1992-1993......... DTH 1985-1991......... DTI 1981-1984......... DTI Rear proc. or torque ft-lbs/Nm DTC DTC DTC DTC DTC — DTL[9] DTM[2] — — — — [41] 184/250 — DTD DTE[17] DTE[17] DTD[18] DTE[17] DTD[18] DTD DTE[17] DTD[18] DTD DTD DTE[17] DTD[18] DTE[17] DTD[18] DTD DTD DTE[17] DTD[18] Eagle Eagle Wagon.........................1988..................... — Medallion...............................1988-1989......... — Premier..................................1988-1992......... 181/245 Summit..................................1993-1996......... 167/226 1989-1992......... 167/226 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — — 123/167 130/180 127/175 11 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Eagle - cont. Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Ford / Mercury - cont. Summit Wagon....................1992-1996......... 167/226 Summit Wagon FWD..........1989-1991......... 165/224 Summit Wagon 4WD.........1989-1991......... 165/224 Talon AWD.............................1995-1998......... 167/226 1990-1994......... 167/226 Talon FWD............................1995-1998......... 167/226 1990-1994......... 167/226 Vision......................................1995-1997......... 120/163 1993-1994......... 80/108 166/225 CRB CRB 167/226 138/190 — 167/226 124/168 125/170 Fiat 500.........................................2012-2013......... 229/310 — Ford / Mercury Aspire.....................................1997..................... 116-174/ 157-235[89] 1994-1996......... 116-174/ 157-235[89] C-Max....................................2013..................... 59/80[44] Capri.......................................1992-1994......... 145/196 Contour, Mystique................1998-2000......... 199/270 1995-1997......... 246/334 Cougar...................................1999-2002......... 214/290 1989-1997......... 221/300 1981-1988......... FDA Country Squire, Colony Park........................1981-1991......... FDA Crown Victoria......................2003-2011......... — 1992-2002......... 221/300 1983-1991......... FDA Edge FWD.............................2011-2013......... FDE 2007-2010......... FDE Edge 4WD.............................2011-2013......... FDE 2007-2010......... FDE Escort.....................................2000-2002......... 205/277 1991-1999......... 205/277 1981-1990......... 188/255 EXP.........................................1981-1987......... 188/255 Fairlane..................................1976-1980......... FDA Fairmont................................1981-1983......... FDA Festiva....................................1989-1993......... 145/196 Fiesta......................................2011-2013......... Five Hundred 2WD.............2007..................... 259/350[42] Five Hundred 4WD.............2007..................... 259/350[42] Five Hundred........................2005-2006......... 258/350[42] Flex FWD...............................2009-2013......... FDE Flex AWD...............................2009-2013......... FDE Focus......................................2012-2013......... 59/80[44] 2005-2011......... 199/270 2000-2004......... 233/316 Freestar.................................2004-2007......... 111/150 12 Make/ Model FDG FDF — FDC 210/290 210/290 214/290 221/300 — — — — — FDE — — [60] 152/206 152/206 FDA FDA — — FDB — 148/200 148/200 — FDE — 173/235 173/235 — Freestyle FWD......................2005-2007......... 259/350[42] Freestyle AWD......................2005-2007......... 259/350[42] Fusion AWD..........................2013..................... 147/200 2006-2012......... 188/255 [59][61] Fusion FWD..........................2013..................... — 2006-2012......... 188/255 [59][61] Granada.................................1981-1982......... FDA Grand Marquis.....................2003-2011......... — 1992-2002......... 221/300 1983-1991......... FDA LTD.........................................1981-1986......... FDA LN7.........................................1982-1983......... 190/255 Lynx........................................1981-1987......... 190/255 Marauder..............................2003-2004......... — Milan AWD............................2006-2011......... 188/255 [59][61] Milan FWD............................2006-2011......... 188/255 Montego FWD......................2007..................... 259/350[42] Montego AWD......................2007..................... 259/350[42] Monterey...............................2005-2007......... 111/150 Mustang................................2006-2013......... 251/340[59] 2005..................... 221/300 Mustang Cobra.....................1999-2004......... 258/350 Mustang................................1994-2004......... 258/350 1981-1993......... FDA Mystique................................1998-2000......... 199/270 1995-1997......... 246/334 Probe......................................1993-1997......... 205/277 1989-1992......... 205/277 Sable,Taurus, Taurus X FWD....................................2008-2013......... FDE Sable, Taurus, Taurus X AWD....................................2008-2013......... FDE Sable, Taurus........................2000-2007......... 184/250 1986-1999......... 190/258 Tempo, Topaz........................1984-1994......... 190/255 Thunderbird..........................2002-2005......... — 1989-1997......... 221/300 1981-1988......... FDA Tracer.....................................1991-1999......... 205/277 1987-1989......... 145/196 Villager...................................1993-2002......... 203/275 Windstar................................2000-2003......... 184/250 1998-1999......... 186/252 1995-1997......... 194/263 XR7.........................................1981-1982......... FDA Zephyr....................................1981-1983......... FDA ZX2.........................................1998-2003......... 205/277 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — 148/200 147/200 188/255 [59][61] 147/200 — — — — — — FDA FDA — 188/255 [59][61] — — 148/200 — — — 240/325 — — 199/270 210/290 154/206 100/136 — FDE 221/300 221/300 FDA 302/410 221/300 — 152/206 — 178/240 221/300 221/300 FDD — — 152/206 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Ford / Mercury Trucks Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Ford / Mercury Trucks- cont. Aerostar 2WD......................1995-1997......... FTA 1986-1994......... FTA Aerostar 4WD......................1995-1997......... 185/257 1986-1994......... 190/260 Bronco...................................1995-1996......... FTM[20] FTQ[21] 1986-1994......... FTL[20] FTO[21] 1981-1985......... FTJ 1977-1980......... FTE Bronco II 2WD......................1984-1990......... FTA Bronco II 4WD......................1984-1990......... FTU[20] FTV[21] Courier...................................1976-1982......... FTD E150 Van...............................2011-2013......... FT6 2007-2010......... FTY 2004-2006......... [39] 1998-2003......... FTY 1977-1997......... FTB E250 Van .............................2011-2013......... FT6 2007-2010......... FTY 2004-2006......... [39] 1998-2003......... FTY 1987-1997......... FTB 1977-1986......... FTB E350 Van .............................2011-2013......... FT6 2007-2010......... FTY 2004-2006......... [39] 1998-2003......... FTY 1987-1997......... FTB 1977-1986......... FTB E450 Van .............................2011-2013......... FT6 1998-2010......... FTY E550 Van .............................2003..................... — Escape FWD.........................2013..................... 59/80[44] 2012..................... 221/300[59] 2004-2011......... 221/300[59] 2001-2003......... 214/290 Escape 4WD.........................2013..................... 59/80[44] 2012..................... 221/300[59] 2004-2011......... 221/300[59] 2001-2003......... 214/290 Escape....................................2001-2003......... 214/290 Excursion ..............................2000-2005......... FTY Expedition 2WD ..................2010-2013......... — 2009..................... — 2007-2008......... — 2003-2006......... — 1997-2002......... FTN — — — — — — — — — — — — — — — — — — — — — — — FTT[23] FTS[24] FTH FTZ[24] FTZ[24] — FTZ[24] FTT[23] FTS[24] FTH FTZ[24] FTZ[24] FTZ[24] 214/290[59] 214/290[59] 214/290 98/133 214/290[59] 221/300[59] 214/290 214/290 FT1[23] 184/250[62] 258/350[59] 254/345 250/338 — Expedition 4WD ..................2010-2013......... 20/27[59] 2009..................... 20/27[59] 2007-2008......... 20/27 2003-2006......... 20/27 1997-2002......... 221/300 Explorer 2WD.......................2011-2013......... — 2002-2010......... — 2001..................... — 1997-2000......... FT2 1995-1996......... FTA 1991-1994......... FTA 2002-2010......... 184/250[59] 2001..................... 184-250 1997-2000......... 184-250 1995-1996......... 195/270 1993-1994......... FTW[20] FTX[21] 1991-1992......... FTU[20] FTV[21] Explorer Sport Trac 2WD...2007-2010......... — Explorer Sport Trac 4WD...2007-2010......... 148/200 Explorer Sport & Sport-Trac 2WD .............2001-2003......... FT2 Explorer Sport & Sport-Trac 4WD ..............2004-2005......... 162/220 2001-2003......... 184/250 F100 Pickup 2WD ..............1977-1983......... FTB F100 Pickup 4WD ..............1981-1983......... FTJ 1977-1980......... FTE F150 Pickup 2WD ..............2013..................... — 2009-2012......... — 2007-2008......... 296/400 2004-2006......... FTY 1997-2003......... FTY 1977-1996......... FTB F150 Pickup 4WD ..............2013..................... 30/40[59] 2009-2012......... 20/27[59] 2007-2008......... 20/27 2004-2006......... 20/27 1997-2003......... 221/300 1996..................... FTM[20] FTR[21] 1995..................... FTM[20] FTQ[21] 1994..................... FTQ[21] FTL[20] 1986-1993......... FTL[20] FTO[21] 1981-1985......... FTJ 1977-1980......... FTE [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 184/250[62] 184/250[62] 254/345 250/338 — FDE 203/275[59] — — — — FDE 203/275[59] — — — — — 203/275 203/275 — — — — — — — — — — — — — — — — — — — — — — 13 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Ford / Mercury Trucks- cont. F250 LD Pickup 2WD .......1997-1998......... FTP 1977-1996......... FTB F250 LD Pickup 4WD .......1997-1998......... 221/300 1996..................... FTM[20] FTR[21] 1995..................... FTM[20] FTQ[21] 1994..................... FTL[20] FTQ[21] 1986-1993......... FTL[20] FTO[21] 1981-1985......... FTJ[19] FTK[22] 1977-1980......... FTE F250 HD Pickup 2WD ......1987-1997......... FTB 1981-1986......... FTB 1977-1980......... FTB F250 HD Pickup 4WD ......1996-1997......... FTM[20] FTR[21] 1995..................... FTM[20] FTQ[21] 1994..................... FTL[20] FTQ[21] 1987-1993......... FTL[20] FTO[21] 1986..................... FTL[20] FTO[21] 1981-1985......... FTJ[19] FTK[22] 1977-1980......... FTE F350 Pickup 2WD ..............1988-1997......... FTB — — — — — — — — FTT[23] FTS[24] FTH FTG FTT[23] FTS[24] FTT[23] FTS[24] FTT[23] FTS[24] FTT[23] FTS[24] FTH FTH F Super Duty 2WD 250-350............................2011-2013......... FT3 2007-2010......... FT3 FT7,FT4 FTZ,FT4 1994-1995......... FTQ 1987-1993......... FTO 14 F Super Duty 4WD 250-350............................2011-2013......... — 2007-2010......... — F Super Duty 2WD 450-550............................2011-2013......... — 2007-2010......... — F Super Duty 4WD 450-550............................2011-2013......... — 2007-2010......... — F Super Duty 250-550 ...........................1999-2006......... FTY — 1986..................... FTO 1981-1985......... FTK 1977-1980......... FTE 1981-1986......... FTB 1977-1980......... FTB F350 Pickup 4WD ..............1996-1997......... FTR Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Ford / Mercury Trucks- cont. FTG FTT[23] FTS[24] FTT[23] FTS[24] FTH FTG FTT[23] FTS[24] FTT[23] FTS[24] FTT[23] FTS[24] FTH FTH FTG 1987..................... FTB Make/ Model Mariner FWD........................2005-2011......... 221/300[59] Mariner 4WD.......................2005-2011......... 221/300[59] Mountaineer 2WD..............2002-2010......... — 2001..................... — 1997-2000......... FT2 Mountaineer 4WD..............2002-2010......... 184/250[59] 2001..................... 184-250 1997-2000......... 184-250 Ranger 2WD ........................2006-2011......... FT2 2001-2005......... FT2 1998-2000......... FTA 1995-1997......... FTA 1983-1994......... FTA Ranger 4WD ........................2006-2011......... 184/250[59] 2001-2005......... 162/220 1998-2000......... [25] 1993-1997......... FTW[20] FTX[21] 1983-1992......... FTU[20] FTV[21] Transit Connect....................2010-2013......... 207/280[59] FT7,FT4 FTZ,FT4 FTZ,FT4 FTZ,FT4 FTZ,FT4 FTZ,FT4 FT1[23] FTZ[24] 214/290[59] 221/300[59] 203/275[59] — — 203/275[59] — — — — — — — — — — — 251/340[59] Geo Metro......................................1989-1997......... 129/175 Prizm......................................1993-1997......... 159/216 1989-1992......... 137/186 Spectrum..............................1989..................... 137/186 Storm.....................................1990-1993......... 137/186 Tracker...................................1989-1997......... 155/210 129/175 — 90/123 IUC — — GMC Trucks - See Chevrolet / GMC Trucks Honda Accord....................................2008-2013......... 242/328 1990-2002......... 181/245 1986-1989......... 134/181 1983-1985......... 137/190 1976-1982......... 108/150 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — 134/181 134/181 HAA HAA Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Honda - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Hyundai - cont. Accord 2.4L A/T ..................2003-2007......... 134/181 Accord 2.4L M/T .................2003-2007......... 181/245 Accord 3.0L ..........................2003-2007......... 181/245 Accord Crosstour FWD.......2010-2013......... 242/329 Accord Crosstour AWD.......2010-2013......... 242/329 Civic .......................................1984-2006......... 134/181 1976-1983......... 108/150 Civic SI ..................................2007-2013......... 181/245 Civic Exc. SI ..........................2007-2013......... 134/181 CR-V ......................................2012-2013......... 242/328 20007-2011...... 242/328 1997-2006......... 181/245 CRX ........................................1984-1991......... 134/181 CRZ.........................................2011-2013......... 134/181 Del Sol ..................................1993-1997......... 134/181 Element ................................2003-2011......... 181/245 Fit ...........................................2007-2013......... 134/181 Insight ...................................2010-2013......... 134/181 2000-2006......... 134/181 Odyssey ................................2005-2013......... 242/328 1995-2004......... 181/245 Passport 2WD & 4WD ......1994-2002......... IUA Pilot .......................................2009-2013......... 242/328 2005-2008......... 210/285 2003-2004......... 181/245 Prelude .................................1992-2001......... 181/245 1990-1991......... 181/245 1983-1989......... 134/181 1979-1982......... 108/150 Ridgeline ...............................2006-2013......... 242/328 S2000 ...................................2000-2009......... 242/329 134/181 134/181 134/181 — 181/245 134/181 HAA — — [109] 181/245 134/181 134/181 134/181 134/181 134/181 134/181 134/181 119/162 — 181/245 — 181/245 181/245 181/245 134/181 181/245 HAA HAA 181/245 181/245 Hyundai Accent ...................................2012-2013......... 202/274 2007-2011......... 188/260 2006..................... 175/237 2001-2005......... 175/237 1995-2000......... 170/230 Azera .....................................2012-2013......... 199/270 2007-2011......... 207/280 2006..................... 170/230 Elantra ..................................2007-2013......... 202/274 2001-2006......... 192/260 1996-2000......... 192/260 1995-92 ............. 192/260 Elantra GT.............................2013..................... 199/270 Entourage ............................2007-2008......... 199/275 Equus.....................................2011-2013......... — Excel ......................................1990-1994......... 170/230 1986-1989......... 170/230 Genesis..................................2009-2013......... — — — — 147/200 147/200 — — — — 192/260 162/220 148/200 — 188/260 203/280 129/175 HIA 188/255 Genesis Coupe......................2010-2013......... — Santa Fe ...............................2013..................... 199/270 2008-2012......... 188/255 2001-2007......... 170/230 Scoupe ..................................1991-1995......... 170/230 Sonata ..................................2011-2013......... 188/255 2008-2010......... 207/280 2002-2007......... 177/240 1995-2001......... 170/230 1992-1994......... 170/230 1989-1991......... 170/230 Tiburon .................................1997-2001......... 170/230 Tiburon 2.0L ........................2008..................... 192/260 2008..................... 207/280 2003-2007......... 170/230 177/240 Tucson....................................2010-2013......... 203/275 2005-2006......... HIB Tucson 2WD ........................2007-2009......... HIB Tucson 4WD ........................2007-2009......... HIB Veloster..................................2012-2013......... 202/274 Veracruz AWD......................2007-2012......... 202/274 Veracruz FWD......................2007-2012......... 202/274 XG300 ...................................2001..................... 192/260 XG350 ...................................2002-2005......... 192/260 188/255 199/270 188/255 170/230 127/175 — — 177/240 167/226 196/270 HIA 158/215 192/260[93] 192/260[93] 170/230 170/230 203/275 170/230 170/230 190/258 — 202/274 — 170/230 170/230 Infiniti EX35 AWD............................2011-2012......... 92/125 2008-2010......... 92/125 EX35 RWD............................2011-2012......... — 2008-2010......... — 2013..................... — EX37 AWD............................2013..................... 92/125 FX35, FX45 AWD................2003-2008......... 203/275 FX35, FX45 RWD................2003-2008......... — FX35, FX50 RWD................2011-2012......... — 2011-2012......... 92/125 2009-2010......... — 2009-2010......... 92/125 FX37 AWD............................2013..................... 92/125 FX37 RWD............................2013..................... — G20.........................................2002..................... 217/294 1999-2001......... 203/275 1991-1996......... 203/275 G25 AWD..............................2011-2012......... 92/125 G25 RWD..............................2011-2012......... — G35.........................................2003-2006......... 177/240 G35 Coupe............................2007..................... — G35 Sedan AWD..................2008..................... 92/125 2007..................... 92/125 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 77/105 135/183 77/105 135/183 77/105 77/105 177/240 177/240 77/105 77/105 136/185 136/185 77/105 77/105 163/221 156/210 163/221 77/105 77/105 177/240 177/240 133/180 129/175 15 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Infiniti - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Isuzu - cont. G35 Sedan RWD.................2008..................... — 2007..................... — G37 AWD..............................2010-2013......... 92/125 2009..................... 92/125 2008..................... 92/125 G37 RWD..............................2010-2013......... — 2009..................... — 2008..................... — I30..........................................2000-2001......... 217/294 1996-1999......... 203/275 I35..........................................2002-2004......... 203/275 J30.........................................1993-1997......... 217/294 JX35 AWD.............................2013..................... 135/182 JX35 FWD.............................2013..................... 135/182 M30........................................1990-1992......... — M35H.....................................2012-2013......... — M35,M45..............................2010..................... 92/125 2009..................... 92/125 2008..................... 92/125 2006-2007......... 92/125 M37,M56..............................2011-2013......... 92/125 M45........................................2003-2004......... 181/245 Q45.........................................1990-2006......... 181/245 QX4.........................................1997-2003......... NDG QX56......................................2011-2013......... 90/123 2004-2010......... 101/137 133/180 129/175 77/105 [63] [63] 77/105 [63] 133/180 163/221 163/221 163/221 178/241 92/125 — 117/152 77/105 136/185 [63] 135/183 130/175 77/105 177/240 177/240 181/245 164/223 170/230 Isuzu Amigo.....................................1998-2000......... IUA Amigo 2WD..........................1989-1994......... IUB Amigo 4WD..........................1989-1994......... IUA Ascender 2WD.....................2003-2008......... — Ascender 4WD.....................2003-2008......... 103/140 Axiom 2WD..........................2002-2004......... 181/245 Axiom 4WD..........................2002-2004......... — Hombre 2WD ......................1997-2000......... GMA 1996..................... GMA Hombre 4WD ......................1997-2000......... 103/140 1996..................... 181/245 I-Mark ...................................1986-1989......... 137/186 1981-1984......... IUC I-Mark FWD .........................1985..................... 137/186 I-Mark RWD ........................1985..................... IUC Impulse .................................1990-1993......... 137/186 1983-1989......... IUD i-280, i-290, i-350, i-370 2WD .......................2006-2008......... — i-280, i-290, i-350, i-370 4WD .......................2006-2008......... 191/260 Oasis ......................................1996-1999......... 181/245 — — — — — — — — — — — IUC — IUC — — — — — 134/185 Pickup 2WD .........................1988-1995......... IUB 1981-1987......... IUE Pickup 4WD .........................1988-1995......... IUA 1981-1987......... IUF Rodeo ....................................1991-2002......... IUA Rodeo 2WD..........................2003-2004......... — Rodeo 4WD..........................2003-2004......... 181/245 Rodeo Sport ........................2001-2003......... IUA Stylus ....................................1991-1993......... 137/186 Trooper .................................1992-2002......... IUA 1984-1991......... IUF Vehicross...............................2000-2001......... IUA — — — — — — — — — — — — Jaguar All............................................1980-1987......... JGB S-Type...................................2000-2008......... — X-Type...................................2002-2008......... 200/270 XF AWD..................................2013..................... 221/300 XF RWD.................................2009-2013......... — XFR.........................................2010-2013......... — XJ AWD..................................2013..................... 221/300 XJ RWD.................................2004-2013......... — XJ Series...............................2004-2007......... — XJ6, XJ12 & XJS..................1988-1997......... JGA XJ8.........................................1998-2003......... — XK, XKR Series.....................2004-2013......... — XK8.........................................1997-2003......... — — 221/300 200/270 221/300 221/300 221/300 221/300 221/300 221/300 — 236/320 221/300 236/320 Jeep Cherokee...............................1996-2001......... 175/237 1976-1983......... JPB Cherokee 2WD.....................1984-1995......... JPA Cherokee 4WD.....................1984-1995......... 175/237 CJ-5.......................................1977-1983......... JPB CJ-7.......................................1977-1986......... JPB Comanche 2WD...................1986-1992......... JPA Comanche 4WD...................1986-1992......... 175/237 Commander..........................2006-2010......... 100/135 Compass, Patriot AWD.......2007-2013......... 180/244 Compass, Patriot FWD.......2007-2013......... 180/244 Grand Cherokee...................2005-2010......... 100/135 1993-2004......... 175/237 Grand Cherokee AWD.........2011-2013......... 229/310 Grand Cherokee RWD........2011-2013......... — Grand Wagoneer ................1993..................... 175/237 1984-1991......... JPB J10 Pickup ...........................1976-1987......... JPB J20 Pickup ...........................1976-1987......... JPB Liberty RWD ........................2002-2012......... — Liberty 4WD ........................2002-2012......... 100/135 Scrambler ............................1982-1985......... JPB [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — — — — — — — — — 181/245 — — — 229/310 229/310 — — — — — — — 16 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Jeep - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Lexus Wagoneer .............................1976-1983......... JPB Wagoneer 2WD ..................1984-1990......... JPA Wagoneer 4WD ..................1984-1990......... 175/237 Wrangler ...............................2007-2013......... 100/136 1987-2006......... 175/237 — — — — — Kia Amanti...................................2004-2009......... 207/280 Borrego RWD.......................2009-2010......... 199/270 Borrego 4WD.......................2009-2010......... 199/270 Forte.......................................2010-2013......... 203/275[93] Optima [81]...........................2011-2013......... 188/255 Optima [67]...........................2006-2010......... 203/280 Optima [66]...........................2001-2006......... 192/260 Rio...........................................2012-2013......... 202/275 Rio [65]..................................2005-2011......... 188/255 Rio [64]..................................2001-2005......... 145/200[93] Rio5........................................2011-2013......... 202/275 2006-2011......... 188/255 Rondo.....................................2007-2010......... 203/275 Sedona...................................2006-2012......... 199/270[93] 2002-2005......... 199/270[93] Sephia....................................1997-2001......... 180/244 1994-1996......... 177/240 Sorento..................................2011-2013......... 159/215 2003-2009......... 198/275 Soul........................................2011-2013......... 199/270 Spectra, Spectra5................2008-2009......... 188/255 2001-2007......... 180/244 Sportage................................1995-2002......... KIA Sportage FWD.....................2011-2013......... 202/274 2005-2010......... 207/280[86] Sportage 4WD.....................2011-2013......... 202/274 2005-2010......... 207/280[86] — 199/270 199/270 — — — 192/260 — — KIB — — — 188/255 25/33 180/244 [35] 159/215 — — 188/255 180/244 — — 207/280[86] 202/274 207/280[86] Land Rover Defender ..............................1997..................... LRC 1993-1995......... LRB Discovery ..............................1995-1997......... LRA Discovery II ...........................1998-2004......... 360/490[6] Evoque...................................2012-2013......... 89/120[26] Freelander ............................2002-2005......... 295/400 LR2.........................................2008-2013......... [71] LR3 ........................................2005-2009 ........ 258/350 LR4.........................................2010-2013......... 170/230[95] Range Rover ........................2013..................... 89/120[26] 2003-2012......... 311/420 2000-2002......... 192/260[6] 1995-1997......... LRA Range Rover Sport .............2010-2013......... 169/230[95] 2008-2009......... 169/230[95] — — — — 73/100[44] 295/400 LRD 258/350 311/420[95] 89/120[26] 311/420 — — 311/420[95] 258/350[95] CT200H.................................2011-2013......... 159/216 ES250 ...................................1990-1991......... 137/186 ES300 ...................................1992-2003......... 217/294 ES300H.................................2013..................... 217/294 ES330 ...................................2004-2006......... 217/294 ES350 ...................................2007-2013......... 217/294 GS300....................................1993-1997......... 147/199 GS300 AWD.........................2006..................... 217/294 GS300 FWD.........................2001-2006......... 217/294 GS300, GS400.....................1998-2000......... 147/199 GS350 AWD.........................2007-2013......... 217/294[96] GS350 RWD.........................2007-2013......... — GS430....................................2001-2007......... — GS450H.................................2007-2013......... — GS460 2WD.........................2008-2011......... — GS460 4WD.........................2008-2011......... 217/294[96] GX460....................................2010-2013......... 173/235 GX470....................................2003-2009......... 173/235 HS250H................................2010-2012......... 159/216[97] IS250 AWD...........................2006-2013......... 217/294[96] IS250 RWD..........................2006-2013......... — IS300.....................................2000-2005......... 108/147 IS350 AWD...........................2006-2013......... 217/294[96] IS350 RWD..........................2011-2013......... — IS-F........................................2008-2013......... — LS400....................................2000..................... — 1995-1999......... 147/199 1990-1994......... 147/199 LS430....................................2001-2006......... — LS460 AWD..........................2009-2013......... 217/294[97] LS460 RWD.........................20007-2013...... — LS600HL...............................2008-2013......... 217/294[97] LX450....................................1996-1997......... TAA LX470....................................1998-2007......... TAH LX570....................................2008-2013......... [52] RX300 2WD.........................1999-2003......... 217/294 RX300 4WD.........................1999-2003......... 217/294 RX330 2WD.........................2004-2006......... 217/294 RX330 4WD.........................2004-2006......... 217/294 RX350 2WD.........................2007-2013......... 217/294 RX350 4WD.........................2007-2013......... 217/294 RX400H 2WD......................2006-2008......... 217/294 RX400H 4WD......................2006-2008......... 217/294 RX450H 2WD......................2010-2013......... 217/294 RX450H 4WD......................2010-2013......... 217/294 SC300, SC400.....................1992-2000......... 147/199 SC430....................................2002-2010......... 147/199 — 90/123 — — — — 213/289 214/290 213/289 213/289 214/290[96] 214/290[96] 214/290 214/290[96] 214/290[96] 214/290[96] — — — 214/290[96] 214/290[96] 213/289 214/290[96] 214/290[96] 214/290[96] 213/289 213/289 253/343 214/290 214/290[97] 214/290[96] 214/290[97] — — — — 159/216 — 217/294 — 217/294 — 217/294 — 217/294 213/289 213/289 Lincoln Aviator....................................2003-2005......... 184/250 Blackwood.............................2002..................... FTY [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 203/275 — 17 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Lincoln - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Mazda - cont. Continental............................1999-2002......... 184/250 1988-1998......... 190/258 LS............................................2000-2006......... — Mark VII..................................1988-1992......... FDA Mark VIII.................................1993-1998......... 221/300 Mark LT Pickup 2WD..........2006-2008......... 296/400 Mark LT Pickup 4WD..........2006-2008......... 20/27 MKS AWD..............................2009-2013......... FDE MKS FWD.............................2009-2013......... FDE MKT AWD..............................2010-2013......... FDE MKT FWD..............................2010-2013......... FDE MKX AWD..............................2011-2013......... FDE 2007-2010......... FDE MKX FWD..............................2011-2013......... FDE 2007-2010......... FDE MKZ AWD..............................2013..................... 147/200 2007-2012......... 189/255[61] MKZ FWD..............................2013..................... 147/200 2007-2012......... 189/255[61] Navigator 2WD....................2003-2006......... — 1998-2002......... FTN Navigator 4WD....................2003-2006......... 20/27 1998-2002......... 221/300 Navigator, Navigator L 2WD....................................2010-2013......... — 2009..................... — 2007-2008......... — Navigator, Navigator L 4WD....................................2010-2013......... 20/27 2009..................... 20/27 2007-2008......... 20/27 Town Car...............................2003-2011......... — 1991-2002......... 221/300 1988-1990......... FDA Zephyr....................................2006..................... 185/255 221/300 221/300 221/300 — — — — FDE — FDE — FDE [60] — 147/200 189/255[61] 189/255[61] 221/300 — 221/300 — 184/250[62] 258/350 254/345 184/250[62] 258/350 254/345 — — — 185/255 Mazda All ...........................................1976-1987......... FDA 323.........................................1990-1994......... 205/277 1986-1989......... 144/196 626.........................................1983-1987......... 145/200 1979-1982......... MAB 626, MX-6 ...........................1993-2002......... 205/277 1988-1992......... 205/277 808.........................................1976-1977......... MAB 929.........................................1988-1991......... 100/138 929, Serenia ........................1992-1995......... 152/206 B1800 Pickup......................1976-1978......... MAC B2000 Pickup .....................1979-1987......... MAC B2200 Pickup .....................1982-1993......... MAC — 152/206 MAA MAA — 152/206 102/138 — 203/275 203/275 — — — B2300 Pickup 2WD ...........2001-2009......... FT2 1994-1997......... FTA B2300 Pickup 4WD ...........2001-2009......... 162/220 1994-1997......... FTW[20] FTX[21] B2500 Pickup 2WD ...........2001..................... FTP 1998-2000......... FTA [25] B2500 Pickup 4WD ...........2001..................... 162/220 B2600 Pickup 2WD ...........1987-1993......... MAC B2600 Pickup 4WD ...........1987-1993......... MAD B3000 Pickup 2WD ...........2001-2007......... FT2 1998-2000......... FTA 1994-1997......... FTA B3000 Pickup 4WD ...........2001-2007......... 162/220 1998-2000......... [25] 1994-1997......... FTW[20] FTX[21] B4000 Pickup 2WD ...........2001-2009......... FT2 1998-2000......... FTA 1994-1997......... FTA B4000 Pickup 4WD ...........2001-2009......... 162/220 1998-2000......... [25] 1994-1997......... FTW[20] FTX[21] CX-5 AWD.............................2013..................... FT8 CX-5 FWD.............................2013..................... FT8 CX7 AWD...............................2007-2012......... 202/274[98] CX7 FWD...............................2007-2012......... 202/274[98] CX9 AWD...............................2007-2013......... 202/274[98] CX9 FWD...............................2007-2013......... 202/274[98] GLC ........................................1977-1980......... MAB GLC Wagon ..........................1981-1983......... MAB GLC Exc. Wagon ..................1981-1985......... 145/200 Mazda 2.................................2011-2013......... 202/274 Mazda 3 ................................2007-2013......... 202/274 2004-2006......... MA3 Mazda 5 ................................2007-2013......... 202/274 2006..................... 188/255 Mazda 6 AWD......................2003-2013......... 202/274 Mazda 6 FWD......................2006-2007......... 202/274 Miata (MX-5)........................2004-2013......... — Miata .....................................1999-2003......... 159/216[87] 1990-1997......... 159/216 Millenia .................................1995-2002......... 205/277 MPV .......................................2000-2006......... 205/277 MPV 2WD ............................1989-1998......... 152/206 MPV 4WD ............................1989-1998......... 203/275 MX-3, Precidia ....................1992-1996......... 205/277 MX-5 .....................................2006..................... — [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — — — — — — — — — — — — — — — — FT8 — 202/274 — 202/274 — — — MAB — — — — — 235/319 — 202/275[10] 235/319[68] 217/293[88] 152/206 152/206 — — 152/206 188/255 18 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Mazda - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Mercedes-Benz - cont. MX-6......................................1993-1997......... 205/277 1988-1992......... 205/277 Navajo 2WD ........................1991-1994......... FTA Navajo 4WD ........................1993-1994......... FTW[20] FTX[21] 1991-1992......... FTU[20] FTV[21] Protégé, Protégé 5..............1990-2003......... 205/277 RX-7 ......................................1993-1995......... 152/206 1986-1992......... MAB 1979-1985......... MAB RX-8 ......................................2004-2011......... — Serenia..................................1992-1995......... 152/206 Tribute....................................2008-2011......... 222/300 2001-2006......... 214/290 152/206 102/138 — — — — — 152/206 203/275 203/275 — 202/275 203/275 222/300 214/290 Mercedes-Benz C Series..................................2008-2013......... — 1997-2007......... — C Series 4 Matic...................2008-2013......... [102] 2003-2007......... 81/110[82] CL Series...............................2010-2013......... — 2006-2009......... — 2000-2005......... 236/320 CL 63AMG.............................2008-2013......... — CL 65AMG.............................2008-2013......... — CL Series 4 Matic................2009-2013......... [102] CLK Series.............................1998-2012......... — CLK AMG Series...................2001-2009......... — CLK AMG Cabriolet, Black Series.......................2004-2009......... — CLS Series.............................2012-2013......... — 2006-2011......... — CLS Series 4 Matic..............2012-2013......... [102] E Series.................................2004-2012......... — 1999-2003......... [83] 1997-1998......... [83] E Series 4 Matic...................2010-2013......... [102] 2004-2009......... 51/70[44] 1999-2003......... [30] 1997-1998......... [30] G Series.................................2002-2013......... 133/180 GL Series...............................2013..................... [106] 2007-2012......... 192/260[84] GLK Series............................2010-2013......... [102] GLK Series 4 Matic..............2010-2013......... 192/260[84] ML Series..............................2013..................... — 2006-2011......... 192/260[84] 1998-2005......... 361/490 ML Series 4 Matic...............2012-2013......... [106] R Series.................................2006-2012......... 192/260[84] [103] 162/220 [103] 162/220 [103] [104] 236/320 [103] [105] [103] 162/220 162/220 [104] 258/350 [103] 258/350 [103] 236/320 162/220 [103] [103] 236/320 162/220 — [108] — [103] — [108] [107] 361/490 [108] [107] S Series.................................2006-2013......... — 1997-2005......... — S55 AMG...............................2001-2006......... — S63,S65 AMG......................2006-2012......... — S Series 4 Matic...................2006-2013......... [102] 2003-2005......... 51/70[44] SL Series...............................2006-2013......... — ................................................2003-2005......... — ................................................1997-2002......... — SL 65 AMG............................2005-2011......... — SLK Series.............................2012-2013......... — 2000-2011......... — SLK 55 AMG Series.............2002-2013......... — Sprinter Dual Rear Wheels................................2011-2013......... Inner Hub Nut.................................................. — Outer Hub Nut................................................. — Sprinter Single Rear Wheel..................................2011-2013......... — [103][78] 236/320 [104] [105] [103][78] 236/320 [103] 236/320 162/220 [77] 258/350 162/220 258/350 [41] 184/250 — Mercury - See Ford / Mercury Mini Cooper AWD.........................2002-2013......... 134/182 Cooper FWD........................................................ 134/182 134/182 [117] — Mitsubishi 3000GT AWD ......................1991-1999......... 166/225 3000GT FWD ......................1991-1999......... 166/225 Cordia, Tredia .......................1983-1988......... 167/226 Diamante ..............................1997-2004......... 167/226 1992-1996......... 167/226 Eclipse....................................2006-2012......... 167/226 2000-2005......... 167/226 Eclipse AWD .........................1995-1999......... 167/226 1990-1994......... 167/226 Eclipse FWD .........................1995-1999......... 167/226 1990-1994......... 167/226 Endeavor FWD.....................2004-2011......... 188/225 Endeavor 4WD.....................2004-2011......... 188/225 Expo ......................................1992-1996......... 167/226 Galant ....................................2010-2012......... 188/255 1994-2009......... 167/226 1985-1988......... 167/226 Galant AWD..........................1989-1993......... 167/226 Galant FWD .........................1989-1993......... 167/226 I-MIEV....................................2012..................... — Lancer ...................................2002-2007......... 181/245 Lancer AWD..........................2011..................... 129/176[110] 2008-2010......... 129/176 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 203/280 166/225 MIA — 166/225 — — 166/225 138/190 — 166/225 — 188/225 166/225 — — MIA MIA MIA 129/176 130/175 129/176 129/176 19 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Mitsubishi - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Nissan - cont. Lancer AWD Evolution........2012-2013......... 129/176[110] Lancer AWD Ex. Evolution.2012-2013......... 184/250 Lancer FWD..........................2012-2013......... 184/250 2011..................... 129/176[110] 2008-2010......... 129/176 Mirage ...................................1993-2002......... 167/226 1989-1992......... 167/226 1985-1988......... 167/226 Montero.................................2004-2006......... 148/200 2001-2003......... 188/255 1983-2000......... DTF Montero Sport 2WD...........1997-2004......... DTJ Montero Sport 4WD...........1997-2004......... DTJ Outlander AWD....................2003-2006......... 181/245 Outlander 2WD....................2007-2013......... 129/176 2003-2006......... 181/245 Outlander 4WD....................2007-2013......... 129/176 Outlander Sport 2WD........2011-2013......... 129/176 Outlander Sport 4WD........2011-2013......... 129/176 Pickup 2WD..........................1983-1996......... CRD Pickup 4WD..........................1983-1996......... DTF Precis......................................1993-1994......... 170/230 1990-1992......... 167/226 1987-1989......... 167/226 Raider.....................................2006-2009......... 185/251 Sigma.....................................1988-1990......... 167/226 Starion...................................1984-1989......... CRB Van..........................................1987-1990......... CRD 129/176 129/176 — — — 130/180 127/175 90/125 188/255 188/255 — — — 181/245 — 130/175 129/176 — 129/176 — — 127/175 127/175 HIA — MIA — — Nissan 200SX....................................1995-1998......... 174/236 1977-1988......... NDB 210.........................................1979-1982......... NDE 240SX....................................1995-1998......... 181/245 1989-1994......... 134/182 280ZX....................................1979-1983......... NDB 300ZX....................................1990-1996......... 181/245 1984-1989......... NDB 310.........................................1979-1982......... — 350Z.......................................2003-2009......... — 370Z.......................................2012-2013......... — 2011..................... — 2009-2010......... — 510.........................................1978-1981......... NDE 810.........................................1978-1983......... NDB Altima.....................................2013..................... 135/182 2008-2012......... 129/175 2007..................... 92/125 2002-2006......... 202/275 1993-2001......... 203/275 163/221 — — 178/241 203/275 — 178/241 — NDC 177/240 77/105 133/180 [63] — — — — — — 163/221 Armada 2WD.......................2012-2013......... — 2005-2011......... — Armada 4WD.......................2012-2013......... 101/137 2005-2011......... 101/137 Axxess FWD..........................1990..................... 203/275 Axxess 4WD.........................1990..................... 203/275 B210......................................1976-1978......... NDB Cube.......................................2009-2013......... 92/125 Frontier 2WD........................2005-2013......... — 2004..................... NDA 1998-2003......... NDA Frontier 4WD........................2005-2013......... 101/137 2004..................... NDG 1998-2003......... NDG GT-R.......................................2009-2013......... 166/225 Juke 2WD.............................2011-2013......... 136/185 Juke 4WD.............................2011-2013......... 136/185 Leaf.........................................2011-2013......... 136/185 Maxima..................................2009-2013......... 203/275 2007-2008......... 203/275 2004-2006......... 217/294 2000-2003......... 217/294 1989-1999......... 203/275 1985-1988......... 203/275 1983-1984......... NDB Murano AWD........................2013..................... 177/240 2011-2012......... 177/240 2009-2010......... 129/175 2003-2007......... 92/125 Murano FWD........................2013..................... 177/240 2011-2012......... 177/240 2009-2010......... 129/175 2003-2007......... 92/125 NX...........................................1991-1993......... 174/236 Pathfinder 2WD...................2013..................... — 2005-2012......... — Pathfinder 4WD...................2013..................... 135/182 2005-2012......... 101/137 Pathfinder..............................1996-2004......... NDG Pathfinder 2WD...................1987-1995......... NDD Pathfinder 4WD...................1987-1995......... NDG Pathfinder Armada 2WD...2004..................... — Pathfinder Armada 4WD...2004..................... 101/137 Pickup 2WD..........................1981-1997......... NDD Pickup 4WD..........................1987-1997......... NDG 1984-1985......... NDH ................................................1981-1982......... 126/175 Pickup 4WD, Early...............1983..................... 126/175 Pickup 4WD, Late................1983..................... NDH Pickup 4WD, 720................1986..................... NDH Pickup 4WD, D21................1986..................... NDG [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 135/182 170/230 135/182 170/230 163/221 203/275 — — — 206/280 — — 206/280 — 166/225 — 92/125 — — — — 163/221 163/221 — — 92/125 129/175 129/175 92/125 — — — — 163/221 92/125 177/240 92/125 177/240 — — — 170/230 170/230 — — — — — — — — 20 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Nissan - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Oldsmobile - cont. Pickup....................................1976-1980......... NDE Pulsar.....................................1987-1990......... 174/236 1983-1986......... — Quest......................................2011-2013......... 155/211 2004-2009......... 92/125 1993-2002......... 203/275 Rogue AWD..........................2011-2013......... 136/185 2008-2010......... 92/125 Rogue FWD..........................2011-2013......... 136/185 2008-2010......... 92/125 Sentra....................................2013..................... 96/130 2012..................... 140/190 2007-2011......... 92/125 2006..................... 145/197 1987-2001......... 174/236 1982-1986......... — Sentra 1.8L...........................2002-2005......... 174/236 Sentra 2.5L...........................2002-2005......... 217/294 SE-R 2.5L.............................2002-2003......... 217/294 Stanza....................................1987-1992......... 203/275 1982-1986......... 174/236 Titan.......................................2004-2013......... 101/137 Versa Hatchback..................2012..................... 140/190 Versa Sedan..........................2012-2013......... 183/247 Versa......................................2007-2011......... 83/113 Xterra.....................................2005-2013......... 101/137 Xterra 2WD...........................2000-2004......... NDA Xterra 4WD...........................2000-2004......... NDG — 163/221 NDC — — 178/240 92/125 — — 92/125 — — — 163/221 163/221 NDC 163/221 163/221 163/221 — NDC — — 177/240 — — — — Oldsmobile 88...........................................1998-1999......... 118/160 1992-1997......... 107/145 1986-1991......... 185/260 1980-1985......... GMA 98...........................................1992-1996......... 107/145 1985-1991......... 185/260 1980-1984......... GMA Achieva .................................1998..................... 74/100[3] 1992-1997......... 185/260 Alero ......................................1999-2004......... [34] Aurora ...................................2001-2003......... 118/160 1998-1999......... 118/160 1995-1997......... 107/145 Bravada ................................1997-2004......... 103/140 1991-1996......... 181/245 Calais .....................................1985-1991......... 185/260 Ciera, Cruiser .......................1996..................... 107/145 1992-1995......... 103/140[4] 1983-1991......... 185/260 1982..................... 225/290 Custom Cruiser ...................1980-1992......... GMA — — — — — — — — — — — — — — — — — — — — Cutlass FWD ........................1997-1999......... 284/385 Cutlass Supreme ................1996-1997......... 151/205 1988-1995......... 184/250 Cutlass Supreme RWD .....1988..................... GMA Cutlass RWD ........................1980-1987......... GMA Firenza ..................................1982-1988......... 185/260 Intrigue .................................2001-2002......... 159/215 1998-2000......... 118/160 LSS ........................................1998-1999......... 118/160 1992-1997......... 107/145 Omega ..................................1983-1984......... 185/260 1980-1982......... 225/290 Regency ................................1998..................... 118/160 1997..................... 107/145 Silhouette .............................2002-2004......... 118/160 1998-2001......... 118/160 1997..................... 151/205 1995-1996......... 104/145 1990-1994......... 185/260 Starfire ..................................1980..................... GMA Toronado ..............................1986-1992......... 183/248 1979-1985......... 175/240 Trofeo ....................................1988-1992......... 183/248 — — — — — — — — — — — — — — 192/260 — — — — — — — Plymouth - See Dodge / Plymouth Plymouth Trucks - See Dodge / Plymouth Trucks Pontiac 1000......................................1983-1987......... GMA 2000......................................1983..................... 185/260 6000......................................1983-1991......... 185/260 1982..................... 225/290 Acadian..................................1980-1987......... GMA Aztec.......................................2001-2005......... 192/260 Bonneville.............................1998-2005......... 118/160 1992-1997......... 107/145 1987-1991......... 185/260 Bonneville, Catalina.............1980-1986......... GMA Fiero.......................................1988..................... 220/280 1984-1987......... 195/267 Firebird...................................1993-2002......... — 1980-1992......... GMA Firefly......................................1989-1997......... 129/175 1985-1988......... 151/210 Grand Am..............................1999-2005......... [34] 1998..................... 74/100[3] 1985-1997......... 185/260 1980-1981......... GMA [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — — — — — 192/260 — — — — 200/270 200/270 — — 129/175 62/100 — — — — 21 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Pontiac - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Porsche - cont. Grand Prix.............................1998-2008......... 118/160 1995-1997......... 151/205 1988-1994......... 184/250 1980-1987......... GMA GTO.........................................2004-2006......... — G3...........................................2009..................... 221/300 G5...........................................2009..................... [58] 2007-2008......... 155/210 G6...........................................2005-2010......... 159/215 G8...........................................2008-2009......... — J2000....................................1982..................... 185/260 Laurentian............................1980-1981......... GMA LeMans..................................1988-1993......... GMR 1980-1981......... GMA Montana................................1999-2001......... 118/160 Montana SV6.......................2007-2009......... 118/160 Montana, Montana SV6.....2002-2006......... 118/160 Parisienne.............................1980-1986......... GMA Phoenix..................................1983-1984......... 185/260 1980-1982......... 225/290 Pursuit...................................2005-2006......... 155/210 Safari Wagon........................1980-1989......... GMA Solstice...................................2006-2009......... — Sunbird..................................1984-1994......... 185/260 1980..................... GMA Sunburst................................1985-1987......... 137/186 Sunfire...................................2002-2005......... 148/200 1998-2001......... 144/195 1995-1997......... 185/260 Sunrunner............................1994-1997......... 155/210 T1000....................................1981-1982......... GMA Tempest.................................1987-1991......... 185/260 Torrent...................................2007-2009......... 151/205 2006..................... 151/205 Trans Sport...........................1997-1999......... 118/160 1995-1996......... 104/145 1990-1994......... 185/260 Vibe.........................................2003-2008......... 159/216 Vibe AWD..............................2009-2010......... 159/215 Vibe FWD..............................2009-2010......... 159/215 Wave......................................2005-2007......... 221/300 — — — — 221/300 — — — — [69] — — — — — — 192/260 — — — — — 159/215 — — IUC — — — — — — 151/205 81/110 — — — — 159/215 — 140/190 Porsche All ...........................................1980-1994......... POA Except 911 ...........................1995..................... POA 911 Turbo ............................2001-2006......... 340/460 911 AWD...............................1995-2012......... 340/460 911 RWD..............................1995-2012......... [29] Boxster .................................1995-2013......... [29] Cayman ................................2006-2013......... [29] Cayenne ................................2003-2013......... 340/460 — — 340/460 340/460 340/460[1] 340/460 340/460 340/460 Panamera AWD...................2010-2013......... 340/460 Panamera RWD...................2010-2013......... — 340/460 340/460 Saab 9-2X ......................................2005-2006......... 162/220 9-3.........................................2003-2007......... 170/230 1999-2002......... [36] 9-3X AWD ............................2008-2011......... 170/230 9-3 FWD...............................2008-2011......... 170/230 9-5.........................................2011..................... SBA 2007-2010......... 170/230 2002-2006......... 148/200[37] 2000-2001......... 125/170[27] 1999..................... [36] 9-7X ......................................2005-2009......... 103/140 900.........................................1994-1998......... 214/290 1979-1993......... 222/300 9000......................................1986-1998......... 214/290 140/190 — — 170/230 — SBA — — — — — 222/300 — Saturn Astra.......................................2008-2009......... [70] Aura........................................2007-2009......... 159/215 ION..........................................2004-2007......... 155/210 2003..................... 81/110 L Series..................................2000-2005......... SNA Outlook AWD........................2007-2010......... 173/235 Outlook FWD........................2007-2010......... 172/235 Relay AWD............................2005-2006......... 118/160 Relay FWD............................2005-2007......... 118/160 S Series.................................1991-2002......... 148/200 SKY.........................................2007-2010......... — Vue AWD...............................2008-2009......... 151/205 2007..................... 151/205 2002-2006......... 151/205 Vue FWD...............................2002-2009......... 151/205 — — — — — 150/205 — 192/260 — — 159/215 151/205 63/85[43] 81/110 — Scion FR-S.......................................2013..................... — iQ.............................................2012-2013......... 159/216[93] tC w/MT.................................2011-2013......... 215/292[93] tC.............................................2005-2013......... 159/216 xA............................................2004-2006......... 159/216 xB............................................2004-2013......... 159/216 xD............................................2008-2013......... 159/216[59] 104/190[93] — — — — — Smart Fortwo....................................2008-2013......... — 33/45[44] Sterling All............................................1987-1991......... 215/290 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — 22 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Subaru Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Toyota Baja .......................................2003-2006......... 162/220 BRZ.........................................2013..................... — B9 Tribeca ............................2006-2007......... 177/240 Forester ................................2004-2006......... 162/220 Forester AWD ......................2007-2013......... 162/220 2003-2006......... 140/190 1998-2002......... 137/186 Impreza ................................2004-2013......... 162/220 2003..................... 140/190 Impreza AWD ......................1993-2002......... 137/186 Impreza FWD ......................1993-1995......... 137/186 Justy ......................................1987-1994......... 130/177 Legacy, Outback ..................2004-2013......... 162/220 2002-2003......... 159/216 2000..................... 137/186 Legacy, Outback, 2.5L .......2001..................... 137/186 Legacy, Outback, 3.0L .......2001..................... 159/216 Legacy AWD ........................1990-1999......... 137/186 Legacy FWD ........................1990-1996......... 137/186 SVX ........................................1992-1997......... 137/186 Tribeca...................................2008-2013......... 177/240[98] XV Crosstrek.........................2013..................... 162/220 All Others 4WD ...................1976-1994......... 148/200 All Others FWD ...................1976-1994......... 148/200 177/240 140/190[98] 177/240 — 140/190 140/190 137/186 140/190 140/190 137/186 SUA SUA 177/240 174/235 174/235 174/235 174/235 137/186 SUA 138/187 177/240[98] 140/190 145/196 SUA Suzuki Aerio, Aerio SX.....................2002-2007......... 127/175 Esteem...................................1995-2002......... 127/175 Equator..................................2009-2012......... 101/137 Forenza..................................2004-2008......... 221/300 Grand Vitara..........................1999-2005......... 156/216 Grand Vitara AWD...............2006-2013......... 160/220 Grand Vitara FWD...............2006-2013......... 160/220 Kizashi AWD..........................2010-2013......... 185/250 Kizashi FWD..........................2010-2013......... 185/250 Reno.......................................2006-2008......... 221/300 Samari...................................1989-1995......... SZA Sidekick..................................1991-1998......... 152/210 1989-1990......... 119/160 Swift.......................................1989-2001......... 127/175 SX4 FWD...............................2007-2013......... 147/200 SX4 4WD..............................2007-2013......... 147/200 Verona....................................2004-2006......... 236/320 Vitara......................................1999-2004......... 156/216 XL-7 AWD.............................2008-2009......... 151/205 2007..................... 151/205 XL-7 FWD.............................2008-2009......... 151/205 2007..................... 151/205 XL-7.......................................2004-2006......... 157/216 X-90.......................................1996-1998......... 152/210 127/175 127/175 — — — 160/220 — 185/250 — — — — [28] — 129/175 — — 151/205 81/110 — — — 4-Runner 2WD ...................2003-2013......... 203/275 1996-2002......... — 1986-1995......... TAD 1984-1985......... TAD 4-Runner 4WD ...................2003-2013......... 173/235 1996-2002......... 174/235 1986-1995......... TAB 1984-1985......... TAC Avalon....................................2011-2013......... 217/294 Avalon w/ABS ......................1995-2010......... 217/294 Avalon w/o ABS ...................1995-2010......... 217/294 Camry....................................2011-2013......... 217/294 1983-1986......... 137/186 Camry w/ABS ......................1992-2010......... 217/294 Camry w/o ABS ...................1992-2010......... 217/294 Camry 4WD .........................1987-1991......... 137/186 Camry FWD .........................1987-1991......... 137/186 Camry Solara ......................1999-2008......... 217/294 Celica .....................................1994-2005......... 159/216 1986-1987......... 137/186 1976-1985......... TAE Celica FWD ...........................1992-1993......... 166/226 1988-1991......... 137/186 Celica 4WD ..........................1992-1993......... 166/226 1988-1991......... 137/186 Corolla ...................................2003-2013......... 159/216 1998-2012......... 166/225 1993-1997......... 159/216 1991-1992......... 152/206 1988-1990......... 137/186 1976-1983......... TAE Corolla FWD ........................1984-1987......... 137/186 Corolla RWD ........................1984-1987......... TAE Corona ..................................1976-1982......... TAE Cressida ................................1989-1992......... 108/147 1978-1988......... TAE Echo ......................................2000-2005......... 159/216 FJ Cruiser 2WD ...................2007-2013......... 203/275 FJ Cruiser 4WD ...................2007-2013......... 174/235 Highlander FWD .................2001-2013......... 217/294 Highlander 4WD .................2001-2013......... 217/294 Land Cruiser.........................2011-2013......... [80] 2008-2010......... [52] 1998-2007......... TAH 1981-1997......... TAA 1976-1980......... — Matrix FWD .........................2003-2013......... 159/216 Matrix 4WD .........................2003-2013......... 159/216 MR2 .......................................2000-2005......... — 1985-1989......... 90/123 [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 — — — — — — — — — — 90/123 — 90/123 — 90/123 137/187 90/123 — — 90/123 — 90/123 90/123 166/226 137/186 — — — 90/123 90/123 — 90/123 — — 203/275 — — — — — 217/294 — — — — — — 159/216 159/216 137/186 23 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Toyota - cont. Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Toyota - cont. MR2 Turbo ...........................1993-1995......... 90/123 1991-1992......... 90/123 MR2 Exc. Turbo ...................1993-1995......... 90/123 1991-1992......... 90/123 Paseo ....................................1994-1997......... 159/216 1992-1993......... 166/226 Pickup 2WD .........................1986-1995......... TAD 1979-1985......... TAD Pickup 4WD .........................1986-1995......... TAB 1979-1985......... TAC Previa ....................................1991-1997......... 147/199 Prius ......................................2001-2013......... 159/216 Prius C, Prius V.....................2012-2013......... 159/216 RAV4 .....................................1996..................... 159/216 RAV4 4-cyl. 2WD ...............2007-2012......... 159/216 RAV4 4-cyl. 4WD ...............2007-2012......... 159/216 RAV4 V6 2WD .....................2007-2012......... 215/292 RAV4 V6 4WD .....................2007-2012......... 215/292 RAV4 2WD ...........................1998-2006......... 159/216 RAV4 4WD ...........................1998-2006......... 159/216 RAV4 4WD, 2WD w/ABS...1997..................... 159/216 Sequoia 2WD.......................2008-2013......... 282/382 2001-2007......... 203/274 Sequoia 4WD.......................2008-2013......... 249/338 2001-2007......... 173/235 Sienna AWD ........................2011-2013......... 217/294 2007-2010......... 217/294 2004-2006......... 217/294 Sienna FWD ........................1998-2012......... 217/294 Starlet ...................................1981-1984......... TAE Supra ....................................1993-1998......... 147/199 1987-1992......... 147/199 1982-1985......... 100/137 1979-1981......... TAE Supra 2.8L ...........................1986..................... 100/137 Supra 3.0L ...........................1986..................... 147/199 T100 Pickup 2WD .............1993-1998......... TAD T100 Pickup 4WD .............1993-1998......... TAB Tacoma 2WD .......................2011-2013......... 147/199 2005-2010......... 147/199 1997-2004......... TAD 1995-1998......... TAD Tacoma 4WD .......................2011-2013......... 173/235 2005-2010......... 173/235 1997-2004......... 174/235 1995-1998......... TAB Tacoma Prerunner..............2005-2010......... 203/275 217/294 217/294 159/216 137/186 TAF TAF — — — — — — — 152/206 — 159/216 — 159/216 — 159/216 159/216 251/340 — 251/340 — 217/294 159/216 217/294 — — 213/289 203/275 100/137 — 100/137 203/275 — — — — — — — — — — — Tercel .....................................1994-1999......... 159/216 1992-1993......... 166/226 1989-1991......... 137/186 1983-1988......... 137/186 1980-1982......... 90/127 Tundra 2WD ........................2007-2013......... 282/382 2000-2006......... 203/274 Tundra 4WD ........................2007-2013......... 249/338 2000-2006......... 173/235 Van 2WD ..............................1984-1989......... TAE Van 4WD ..............................1984-1989......... TAG Vensa AWD...........................2009-2013......... 217/294 Vensa FWD...........................2009-2013......... 217/294 Yaris .......................................2006-2013......... 160/216 TAF TAF TAF TAF TAF — — — — — — 217/294 — — Volkswagen Cabrio.....................................1995-2002......... 195/265 Cabriolet................................1985-1992......... 174/240 CC AWD..................................2009-2013......... VWH CC FWD.................................2009-2013......... VWH Corrado..................................1990-1994......... 195/265 EuroVan FWD.......................1997-2003......... 111/150[30] EuroVan AWD.......................1997-2003......... 111/150[30] EuroVan.................................1993-1996......... 148/200 Eos..........................................2013..................... VWH 2012..................... VWI 2007-2011......... VWE Fox..........................................1987-1993......... 170/230 GLI..........................................2009..................... [85] 2008..................... 147/200[47] Golf.........................................1999-2006......... VWC Golf AWD...............................2012-2013......... VWH Golf FWD...............................2010-2013......... VWH Golf w/Base Suspension....1985-1998......... 195/265 Golf w/Plus Suspension.....1985-1998......... VWD GTI..........................................2010-2013......... VWH 2006-2009......... VWE 1983-1984......... 174/240 GTI w/Base Suspension.....1985-1998......... 195/265 GTI w/Plus Suspension......1985-1998......... VWD Jetta.......................................2011-2013......... VWH 2007-2010......... VWE 1999-2006......... VWC 1980-1984......... 174/240 Jetta w/Base Suspension..1985-1998......... 195/265 Jetta w/Plus Suspension...1985-1998......... VWD New Beetle...........................2012-2013......... VWJ 1998-2010......... VWC Passat.....................................2013..................... VWL 2012..................... VWH 2009-2010......... VWE[75] [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 VWB VWB VWH [74] VWB — 111/150[30] VWB [74] [77] 148/200[45] VWB — — 129/175 VWH [99] VWB VWB [99] VWF VWB VWB VWB [99] VWF 129/175 VWB VWB VWB 133/180[44] 129/175 133/180[44] 133/180[45] [74] 24 Make/ Model Year Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm Volkswagen - cont. Front proc. or torque ft-lbs/Nm Rear proc. or torque ft-lbs/Nm S40, V40 ..............................2004-2006......... 26/35 [44] 2003..................... 89/120[26] S60 AWD...............................2011-2013......... 26/35[44] 2001-2009......... 26/35[44] S60 FWD............................................................. 26/35[44] ............................... 37/50 S70, V70 ..............................1998-2000......... 89/120[26] S80 ........................................2001-2006......... 26/35[30] 1999-2000......... 37/50 S80 AWD...............................2007-2013......... 26/35[44] S80 FWD............................................................. 26/35[44] S90, V90 ..............................1998-1999......... VOA V50 ........................................2011..................... 26/35[44] V50 AWD...............................2005-2010......... 26/35[44] V50 FWD............................................................. 26/35[44] V70 ........................................2008-2010......... 26/35 [44] V70 FWD..............................2001-2007......... 26/35 [44] V70, V70R AWD................................................. 26/35 [44] XC60.......................................2010-2013......... 26/35[44] XC70.......................................2008-2013......... 26/35[44] 2006-2007......... 26/35[44] XC90 AWD............................2003-2013......... 26/35[44] XC90 FWD........................................................... 26/35[44] 37/50 89/120[26] 26/35 37/50 — — — — — 26/35 — 102/140[26] 81/110 37/50 — — — 37/50 26/35 26/35 36/50 37/50 — Make/ Model Year Volvo - cont. Passat AWD..........................2007-2008......... VWE[75] 1998-2006......... [31] Passat FWD..........................2007-2008......... VWE[75] 1998-2006......... [31] Passat w/Base Suspension FWD..............1995-1997......... 195/265 Passat w/Plus Suspension FWD..............1995-1997......... 66/90[27] Passat w/Base Suspension 4WD.............1995-1997......... 195/265 Passat w/Plus Suspension 4WD.............1995-1997......... 66/90[27] Passat Synchro.....................1990-1994......... 195/265 Passat Exc. Synchro............1990-1994......... 195/265 Phaeton.................................2004-2006......... — Pickup....................................1980-1984......... 174/240 Quantum Synchro...............1982-1988......... 170/230 Quantum Exc. Synchro.......1982-1988......... 170/230 R32.........................................2008..................... VWE[75] Rabbit.....................................2006-2010......... VWE[75] 1976-1984......... 174/240 Routan...................................2009-2011......... 118/160 Scirocco..................................1985-1989......... 195/265 1976-1984......... 174/240 Tiguan AWD..........................2009-2013......... VWH Tiguan FWD..........................2009-2013......... VWH Touareg ...............................2011-2013......... VWK Touareg w/17, 18, 18 Plus Wheels.......................2003-2010......... 369/500 Touareg w/16 Wheels........2003-2010......... 148/200 Vanagon................................1980-1983......... VWB Vanagon Synchro................1984-1991......... 258/350 Vanagon Exc. Synchro........1984-1991......... VWB [73] 85/116 [74] AIA VWB 66/90[27] 66/90[27] VWB 170/230 VWB 148/200[45] VWB 170/230 VWB VWG VWF VWB — VWB VWB VWH — VWK Yugo All............................................1985-1991......... 160/215 — 369/500[75] 148/200[75] 253/350 253/350 253/350 Volvo 240, 260 Series .................1976-1993......... VOA 740[72]..................................1985-1990......... VOA 760.........................................1988-1990......... VOA 760[72]..................................1983-1987......... VOA 780[72]..................................1987-1990......... VOA 850.........................................1993-1997......... 89/120[26] 940.........................................1991-1995......... VOA 960.........................................1992-1997......... VOA C30.........................................2008-2013......... 26/35[44] C70 ........................................2007-2013......... 26/35 [44] 1998-2006......... 89/120[26] Coupe ....................................1991..................... VOA DL, GL, GLE, GLT ................1980-1984......... VOA S40 ........................................2011..................... 26/35[44] S40 AWD...............................2007-2010......... 26/35 [44] S40 FWD, V40 ....................2007-2010......... 26/35[44] — — 102/140[26] 102/140[26] — 102/140[26] 102/140[26] — — — 102/140[26] — 37/50 37/50 — [ ] Footnote codes, see pages 26-28 • Adjustment procedure codes, see pages 29-33 25 Footnote codes [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] 26 Additional lock nut on 911 Carrera RS, 147 ft-lbs/200 Nm. With 302RBI rear axle. After tightening to this value, turn an additional 40 degrees. After tightening to this value, turn an additional 20 degrees. Soft ride & sport suspension, 118 ft-lbs/160 Nm; heavy duty suspension, 170 ft-lbs/230 Nm. Driveshaft nut. With Rockwell 12" or 12 1/4" ring gear. With 9 3/4" or 10 1/2" ring gear. With 10.5 or 11.5 rear axle. Maximum value shown. Torque value varies from 174-202 ft-lbs/236- 275 Nm. With 9 3/4" ring gear. With manual locking hubs. With automatic locking hubs. With 11" ring gear (Dana 80 with rear disc brakes). With 10 1/2" or 12 1/2" ring gear. Tighten nut to specified value and tighten further to align cotter pin with hole. With double nut type bearing unit. With wedge nut type bearing unit. With Dana 44 axle. With manual locking hubs. With automatic locking hubs. With Dana 50 axle. With Ford axle. With Dana axle. The wheel hub and bearing are not serviceable or adjustable. If the bearing retaining nut is removed, the hub and bearing must be replaced. After tightening to specification, turn an additional 60 degrees. After tightening to specification, turn an additional 45 degrees. Less wheel hub, 73 ft-lbs/100 Nm. With wheel hub, 127 ft-lbs/175 Nm. Wheel hub to wheel carrier, 340 ft-lbs/460 Nm. After tightening to this value, turn an additional 90 degrees. M14 bolt, tighten to 85 ft-lbs/115 Nm, then turn an additional 180 degrees. M16 bolt, tighten to 140 ft-lbs/190 Nm, then turn an additional 180 degrees. After tightening to this value, turn an additional 180 degrees. Use new bolt or nut. Bolt: Tighten bolt to 177 ft-lbs/240 Nm, loosen 90 degrees, loosen 90 degrees, tighten bolt to 177 ft-lbs/240 Nm, then advance bolt an additional 90 degrees. Nut: Older adhered type hub stamped 8N0 615, apply Audi locking fluid D185 400 A2, or equivalent, tighten nut to 195 ft-lbs/235 Nm. Newer greased type hub stamped 8N0 615A or B, apply grease G052 142 A2, or equivalent, tighten nut to 140 ft-lbs/190 Nm, then turn an additional 90 degrees. First design nut (Pac-style nut painted black), 284 ft-lbs/385 Nm; second design nut (solid gray nut), 173 ft-lbs/235 Nm. Rear disc brake, 131-173 ft-lbs/177-235 Nm; rear drum brake, 154-200 ft-lbs/209-279 Nm. Nut less top groove, 214 ft-lbs/290 Nm; nut with top groove, 125 ft-lbs/ 170 Nm, then turn an additional 45 degrees. After tightening to this value, turn an additional 30 degrees. Tighten axle nut to 132 ft-lbs/179 Nm, rotate axle 5 to 10 times to seat hub bearings, tighten axle nut to 263 ft-lbs/356 Nm. Align axle nut to next forward cotter pin hole and install cotter pin. With Dana 70 axles, tighten bolts to 105 ft-lbs/143 Nm, loosen 90 degrees, tighten to 70 ft-lbs/95 Nm, loosen 90 degrees, tighten 18 ft-lbs/24 Nm. With Dana 135 axles, tighten bolts to 99 ft-lbs/133 Nm, loosen 90 degrees, tighten to 70 ft-lbs/95 Nm, loosen 90 degrees, tighten 18 ft-lbs/24 Nm. M22 nut, tighten to 147 ft-lbs/200 Nm; M24 nut, tighten to 184 ft-lbs/ 250 Nm; M27 nut, 221 ft-lbs/300 Nm. Tighten inner hub nut 221 ft-lbs/300 Nm while spinning wheel hub constantly. Turn back inner nut and then tighten until it touches thrust washer without play. Then tighten 1/8 turn. Install and tighten new front axle wheel end nut to specification in a continuous rotation. Stopping the rotation during installation will cause the nylon lock to seat incorrectly. Footnote codes [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] [66] [67] [68] [69] [70] [71] [72] [73] [74] [75] [76] [77] [78] [79] [80] [81] Then turn additional 36 degrees. Then turn additional 90 degrees. Then turn additional 180 degrees. M27 nut, tighten to 310 ft-lbs/420 Nm; M24 nut, tighten to 184 ft-lbs/ 250 Nm. Then turn additional 80 degrees. There are two styles of axle nuts. Style 1 has a thin collar measuring 1.5mm thick; Style 2 has a thick collar measuring 2.7mm thick. For the Style 1 axle nut, torque to 244 ft-lbs/330 Nm. For style 2 axle nut, tighten to 37 ft-lbs/50 Nm, plus 60 degrees. Do not reuse old nut. With 9 1/4 axle, 132 ft-lbs/179 Nm, then rotate 5 to 10 times, final torque 263 ft-lbs/356 Nm. With 275 FBI axle, 243 ft-lbs/330 Nm. With vehicle on the ground, loosen 90 degrees. With vehicle off the ground and brakes applied, tighten new bolt to 147 ft-lbs/200 Nm. Install wheels and lower the vehicle onto its wheels. Tighten the axle shaft bolt an additional 180 degrees. Always replace bolt after removal. With M14 bolt, tighten to 85 ft-lbs/115 Nm; with M16 bolt, tighten to 147 ft-lbs/200 Nm, if vehicle is raised. Only turn an additional 180 degrees when vehicle is on floor. Always replace nut after removal. Using a 39mm socket, tighten axle shaft nut to 148 ft-lbs/200 Nm. Loosen the axle shaft nut. Tighten the axle shaft nut to 251 ft-lbs/340 Nm. With vehicle on the ground, loosen 90 degrees. With vehicle off the ground and brakes applied, tighten new nut to 110 ft-lbs/150 Nm. Install wheels and lower the vehicle onto its wheels. Tighten the axle shaft nut to 368 ft-lbs/500 Nm. Always replace nut after removal. With M27, thread tighten to 310 ft-lbs/420 Nm; with M24, thread tighten to 106 ft-lbs/145 Nm, then turn additional 90 degrees. Then turn additional 45 degrees. With RPO Codes FE1 or FE3, 118 ft-lbs/160 Nm; with RPO Code FE7, 170 ft-lbs/230 Nm. First design, 284 ft-lbs/385 Nm; second design, 173 ft-lbs/235 Nm. With RPO Code LNF, MU3, 159 ft-lbs/215 Nm; without RPO Code LNF, MU3, 155 ft-lbs/210 Nm. Use new original equipment nut. Using new nut, tighten inner nut to 203 ft-lbs/275 Nm; outer hub nut to 129 ft-lbs/175 Nm. Remove and discard the old wheel hub nut. With the vehicle raised up, apply the brake so the halfshaft will not rotate and install a new wheel hub nut. Do not attempt to tighten the nut with the vehicle on the ground or the wheel bearing will be damaged. Stake the new nut in the keyway to .039 in (1mm) minimum depth. Use new original equipment nut. Have assistant apply the brakes to keep the halfshaft from rotating. Rear CV axle without adjusting cap and spring washer, torque to 136 ft-lbs/185 Nm; with adjusting cap and spring washer, torque to 77 ft- lbs/105 Nm. Kia Rio model code ‘BC’. Kia Rio model code ‘JB’. Kia Optima model code ‘MS’. Kia Optima model code ‘MG’. Maximum value shown. Torque value varies from 174-235 ft-lbs/236- 319 Nm. Tighten in three steps: First, 110 ft-lbs/150 Nm; second, loosen 180 degrees; last, tighten 313 ft-lbs/425 Nm. Tighten in three steps: First, 111 ft-lbs/150 Nm; second, loosen 45 degrees; last, tighten 185 ft-lbs/250 Nm. Torque bolt to 33 ft-lbs plus an additional 80 degrees. The 700 Series has 2 different types of wheel bearings available. The 1982 to 1987 700 Series had an integral front wheel hub and brake disc. The hub was fitted with a conical bearing and castle nut held with a cotter pin. For 1988 and onward the hub and brake disc are separate. Volvo states for 1982-1987 vehicles, once the earlier integral hub/disc units are no longer available, service kits must be used. The service kit included a separate brake disc, a new hub, bearing and seals. There are different torques depending on the type of hub. The tightening torques for 1982-1987 vehicles with the integral hub/disc design are: Torque to 42 ft-lbs (57 Nm). Turn the wheel while tightening. Loosen the nut half a turn and re-tighten to 1.1 ft-lbs (1.5 Nm) (finger tight). Insert the cotter pin. If the holes don’t line up, tighten nut until they do. The tightening torques for 1982-1992 with the separate hub and rotor are: Torque to 74 ft-lbs (100 Nm) plus an additional 45 degrees. Tighten bolt to 52 ft-lbs/70 Nm plus an additional 90 degrees. Always replace bolt after removal. Tighten bolt to 148 ft-lbs/200 Nm plus an additional 180 degrees. Always replace bolt after removal. Use new original equipment bolt. Vehicles with aluminum wheel bearing housing, 148 ft-lbs/200 Nm plus additional 180 degrees; with steel wheel bearing housing, 133 ft-lbs/ 180 Nm plus additional 180 degrees. Tighten with code P99 to 280 ft-lbs/380 Nm; without code P99, 110 ft-lbs/150 Nm plus an additional 45 degrees. Model 221 with code Z07 or Z19, tighten 273 ft-lbs/390 Nm. Models with FE7 suspension 147 ft-lbs/200 Nm. Tighten in two steps; 1st step, 148 ft-lbs/200 Nm Then, 250 ft-lbs/340 Nm. Kia Optima model code ‘TF’. 27 Footnote codes [82] [83] [84] [85] [86] [87] [88] [89] [90] [91] [92] [93] [94] [95] [96] [97] [98] [99] [100] [101] [102] [103] [104] [105] [106] [107] [108] [109] [110] [111] [112] [113] [114] [115] [116] [117] 28 Then turn additional 60 degrees. Bolt, 199 ft-lbs/270 Nm; Nut, 206 ft-lbs/280 Nm. Then turn additional 45 degrees. M16 Bolt Hex head, 148 ft-lbs/200 Nm, then an additional 180 degrees. M16 Bolt, 12 point 52 ft-lbs/70 Nm, then an additional 90 degrees. Maximum value shown. Torque value varies from 148-206 ft-lbs/200- 279 Nm. Maximum value shown. Torque value varies from 123-159 ft-lbs/167- 216 Nm. Maximum value shown. Torque value varies from 159-217 ft-lbs/216- 293 Nm. If bearings are replaced, proceed as follows to select the proper bearing preload spacer. Drive inner and outer bearing races into steering knuckle. Lubricate races and new bearings with engine oil, then install bearing into steering knuckle. Install spacer selection tool kit T87C1104-B, original spacer and hardware to steering knuckle in a soft jaw vise. Tighten center bolt in increments to 36 ft-lbs, 72 ft-lbs, 108 ft-lbs and 145 ft-lbs. After bolt is tightened to each specification, remove from vise and rotate knuckle to seat bearings. Measure the torque required to start rotation of center bolt using an inch pound torque wrench. If torque reading is 2.2-10.4 in-lbs, the spacer thickness is correct. If less than 2.2 in-lbs, a thinner spacer is required. If greater than 10.4 in-lbs, a thicker spacer is required. See service manual for details. Use new nut. After installing nut, stake nut shoulder against spindle. The nut must be replaced if it splits or cracks during staking. Use new nut. Before installing nut, apply a small amount of engine oil to seating surface of nut. After tightening nut, stake nut shoulder against spindle. The nut must be replaced if it splits or cracks during staking. Use new nut. Before installing nut, apply a small amount of engine oil to retaining nut to wheel bearing contact surface. After tightening nut, stake nut shoulder in two locations against spindle. The nut must be replaced if it splits or cracks during staking. Use new nut. After tightening, stake nut into shaft groove. The nut must be replaced if it splits or cracks during staking. Use new nut. After installing nut, stake nut shoulder against spindle in two places. The nut must be replaced if it splits or cracks during staking. Use new retaining nut. After tightening, stake nut. After tightening, stake lock nut. Stake shaft nut after axle hub bearing looseness & axle hub runout inspections. Use new nut. After tightening, stake nut (.02 inch minimum) into shaft groove. The nut must be replaced if it splits or cracks during staking. Tighten bolt to 133 ft-lbs/180 Nm plus an additional 90 degrees. Always replace bolt after removal. Without police package, tighten to 258 ft-lbs/350 Nm. Loosen 180 degrees, then tighten to 258 ft-lbs/350 Nm. Always replace nut after removal. With police package, tighten to 111 ft-lbs/150 Nm. Loosen 180 degrees, then tighten to 313 ft-lbs/425 Nm. Always replace nut after removal. With M27 thread, tighten to 310 ft-lbs/420 Nm; with M24 thread, tighten to 106 ft-lbs/145 Nm, then turn additional 45 degrees. Always replace nut after removal. Tighten 118 ft-lbs/160 Nm, back off nut, tighten 88 ft-lbs/120 Nm, final torque additional 90 degrees. Tighten self locking, 258 ft-lbs/350 Nm; non self locking, 125 ft-lbs/170 Nm, tighten additional 45 degrees. Tighten self locking, 258 ft-lbs/350 Nm; without self locking, 236 ft-lbs/320 Nm. Tighten 110 ft-lbs/150 Nm plus additional 45 degrees. Tighten 184 ft-lbs/250 Nm, loosen 180 degrees, 147 ft-lbs/200 Nm, tighten additional 30 degrees. Tighten 184 ft-lbs/250 Nm, tighten additional 45 degrees. Tighten 258 ft-lbs/350 Nm, loosen 180 degrees, tighten 184 ft-lbs/250 Nm, torque an additional 30 degrees. Rear spindle nut with 4WD, 181 ft-lbs/245 Nm. With real time AWD system, 133 ft-lbs/181 Nm. Front axle torque with castle nut, 129 ft-lbs/176 Nm. Torque with flange nut, 184 ft-lbs/250 Nm. Collar bolt: With vehicle on the ground, loosen 90 degrees. With vehicle off the ground and brakes applied, tighten new bolt to 147 ft-lbs/ 200 Nm. Install wheels and lower the vehicle onto its wheels. Tighten the axle shaft bolt an additional 180 degrees. Always replace bolt after removal. 12 point nut: With vehicle on the ground, loosen 90 degrees. With vehicle off the ground and brakes applied, tighten new nut to 110 ft-lbs/150 Nm. Install wheels and lower the vehicle onto its wheels. Tighten the axle shaft nut to 368 ft-lbs/500 Nm. Always replace nut after removal. Tighten an additional 57 degrees-63 degrees. Replace collar bolt and compression spring. Use new nut. After tightening nut, stake nut on flat areas of output shaft. With M27 thread, tighten to 74 ft-lbs/100 Nm; then turn an additional 45 degrees. Replace collar nut after removal. With M16 thread, tighten to 37 ft-lbs/50 Nm; then turn an additional 155 degrees. Replace collar bolt and spring after removal. Tighten M5 nut 4 ft-lbs/5 Nm. Replace collar nut and oil contact surface. Adjustment procedures AIA Tighten the hub nut gradually while turning the thrust washer with a screwdriver tip. Do not bend or pry with the screwdriver. Tighten the hub nut to the point where the washer cannot be turned and back off slightly. Install the locknut and cotter pin. AMA Tighten hub nut to 20 ft-lbs/27 Nm then back off 1/3 turn. Tighten to 12 in-lbs/1.5 Nm while turning wheel. Install the cage nut and cotter pin. AMB Tighten hub nut to 25 ft-lbs/33 Nm then back off 1/3 turn. Tighten to 6 in-lbs/1 Nm while turning wheel. Install the cage nut and cotter pin. AMC Tighten hub nut to 22 ft-lbs/30 Nm then back off 1/3 turn. Tighten to 6 in-lbs/1 Nm while turning wheel. Install the cage nut and cotter pin. AMD Tighten hub nut to 20-25 ft-lbs/27-33 Nm then back off 1/3 turn. Tighten to 2-10 in-lbs/1 Nm while turning wheel. Install the cage nut and cotter pin. BWA Tighten hub nut to 22-24 ft-lbs/29-32 Nm while rotating wheel. Back off and retighten to 2 ft-lbs/3 Nm. Back off slightly and install cotter pin. CRA Tighten hub nut to 20-25 ft-lbs/25-29 Nm while rotating wheel. Back off 90 degrees and finger tighten. Install cotter pin. CRB Tighten hub nut to 14 ft-lbs/20 Nm. Back off and retighten to 4 ft-lbs/6 Nm. Install cotter pin. CRC Tighten hub nut to 20-27 ft-lbs/27-34 Nm while rotating wheel. Back off and finger tighten. Install cotter pin. CRD Tighten hub nut to 22 ft-lbs/29 Nm. Back off and retighten to 4 ft-lbs/6 Nm. Install cotter pin. DAA Tighten nut to 133 ft-lbs/181 Nm, loosen, tighten to 37 ft-lbs then turn nut an additional 60 degrees. DAB While spinning wheel, tighten nut to 18 ft-lbs/25 Nm, loosen 180 degrees, tighten to 18 in-lbs/2 Nm. DAC While spinning wheel, tighten nut to 15 ft-lbs/20 Nm, loosen 180 degrees, tighten to 9 in-lbs/1 Nm. DAD While spinning wheel, tighten nut to 18 ft-lbs/25 Nm, loosen 180 degrees, tighten to 9 in-lbs/1 Nm. DAE Using a new caulking nut, tighten to 133 ft-lbs/181 Nm, then loosen nut. Tighten the nut 50 degrees, then advance nut an additional 60 degrees. DHA Tighten hub nut to 72-109 ft-lbs/98-147 Nm. Back off nut 1/6 turn. Turn hub 2 to 3 turns. Adjust lock nut so that starting torque is 3.1-7.9 lbs/1.4-3.6 kg when measured with a spring scale attached to the hub wheel stud. Models w/manual hubs, install lock washer and lock nut and tighten to 72-109 ft-lbs/98-147 Nm. Install cotter pin. Recheck staring torque with spring scale. DTC Tighten hub bearing adjustment nut to 120-140 ft-lbs/ 163-190 Nm while turning hub. Loosen 1/8 to 1/3 turn to provide .001-.009” endplay. Tap locking wedge into spindle keyway and adjusting nut. DTD Tighten adjusting nut to 120-140 ft-lbs/163- 190 Nm while turning hub. Loosen 1/3 turn to provide .001-.008” endplay. Tap locking wedge into spindle keyway and adjusting nut. DTE Rotate wheel and tighten locknut until drag is felt at wheel. Back off 1/6 turn to zero or just perceptible endplay. Install lock washer and jambnut. Without turning locknut, tighten jambnut to 35-65 ft-lbs/41-88 Nm. Bend tabs of lock washer over both locknut and jambnut. DTF Tighten locknut to 120 ft-lbs/165 Nm. Back off to 0/0 then retighten to 18 ft-lbs/25 Nm. Back off 30-40 degrees so that the hub turning resistance is 2.6-11.3 lbs/ 0.3-1.3 kg on a spring scale. Install lock washer and loosen locknut slightly to align holes. DTG Tighten adjusting nut to 50 ft-lbs/68 Nm and then loosen. Retorque to 30-40 ft-lbs/41-54 Nm while rotating hub and rotor. Back off 135-150 degrees. Install lock washer by aligning hole on washer with pin on nut. Install outer locknut and torque to 50 ft-lbs/68 Nm. DTH Tighten adjusting nut to 50 ft-lbs/68 Nm and then loosen. Retorque to 30-40 ft-lbs/41-54 Nm while rotating hub and rotor. Back off 135- 150 degrees. Install lock washer by aligning hole on washer with pin on nut. Install outer locknut and torque to 160-205 ft-lbs/217-278 Nm. DTI Tighten adjusting nut to 50 ft-lbs/68 Nm and then loosen. Retorque to 30-40 ft-lbs/41-54 Nm while rotating hub and rotor. Back off 135- 150 degrees. Install tabbed washer and locknut. Without turning adjusting nut, tighten locknut to 65 ft-lbs/88 Nm. Then bend tabs on washer over inner and outer nuts. DTJ Tighten locknut to 120 ft-lbs/165 Nm. Back off to 0/0 then retighten to 18 ft-lbs/25 Nm. Back off 30 degrees so that the hub turning resistance is .9-4.3 lbs/4-9 N on a spring scale. Install lock washer and loosen locknut slightly to align holes. DTK Tighten hub nut to 35 ft-lbs/48 Nm while rotating wheel. Back off nut. Tighten nut to 25 in-lbs/3 Nm. Install cotter pin. Endplay should be .001-.003”. DTL Tighten hub bearing adjustment nut to 22 ft-lbs/30 Nm while turning hub. Loosen nut approximately 30 degrees and align hub nut with axle tube key slot. Install locking key. Endplay should be .001-.010”. DTM Tighten hub nut to 95 Nm (70 ft-lbs) while rotating the hub. Then back off nut 90 degrees and retighten nut to 41 Nm (30 ft-lbs). NOTE: This will set hub to zero end-play. DTA Tighten hub nut 30-40 ft-lbs/37-50 Nm while rotating wheel. Back off and finger tighten. Install cotter pin. Freeplay is measured at wheel .001-.002”. FDA Tighten hub nut to 17-25 ft-lbs/22-29 Nm while rotating wheel. Back off 1/2 turn and re- tighten to 10-15 lbs/ 1-2 kg. Install FDA cotter pin. DTB Tighten hub nut to 30-40 ft-lbs/37-50 Nm while rotating wheel. Back off and finger tighten. Install cotter pin. FDB Tighten hub nut to 18-22 ft-lbs/22-27 Nm while rotating wheel. Back off and retighten until 6-22 in-lbs/0.5-2 Nm of drag is measured at drum with a pull scale. 29 Adjustment procedures FDC Tighten to 18-21 ft-lbs/25-29 Nm, loosen. Using in-lbs torque wrench on wheel stud, measure seal drag. Add amount of seal drag to 1.3-4.3 in-lbs to determine bearing preload. Tighten nut slightly until specified preload is reached. FDD While rotating hub, tighten to 18-23 ft-lbs/24-31 Nm, back-off 2-3 turn, tighten to 18 in-lbs/2 Nm. FDE Tighten old wheel hub, adjusting nut to 258 ft-lbs/350 Nm to seat the halfshaft. Remove and discard the old wheel hub nut. With the vehicle raised up, apply the brake so the halfshaft will not rotate, and install a new wheel hub nut. Tighten nut to 258 ft-lbs/350 Nm. Do not attempt to tighten the nut with the vehicle on the ground or the wheel bearing will be damaged. Tighten the new wheel hub nut to specification within 5 minutes of starting it on treads. Always install a new wheel hub nut after loosening or when not tightening in the specified time. FDF FDG While rotating brake drum, torque locknut to 18-22 ft-lbs/ 25-29 Nm. Loosen locknut until it can be turned by hand and then measure seal drag. To determine specified preload, add seal drag measurement to required bearing preload of 1.3- 4.3 in-lbs. Tighten locknut slightly and then measure amount of force needed to start rotation of drum. Continue to tighten locknut until preload is reached. While rotating brake drum, torque locknut to 18-22 ft-lbs/ 25-29 Nm. Loosen locknut until it can be turned by hand and then measure seal drag. To determine specified preload, add seal drag measurement to required bearing preload of 0.6- 1.91 in-lbs. Tighten locknut slightly and then measure amount of force needed to start rotation of drum. Continue to tighten locknut until preload is reached. FTH Tighten adjusting nut to 130 ft-lbs/180 Nm while rotating hub. Back off enough to get .001-.010” endplay, usually 1/8-1/4 turn. Insert locking wedge in keyway slot. Tap in easily. Do not bottom out against shoulder of adjusting nut. Wedge must cut a new groove in nut or both must be replaced. FTI Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Back off 90 degrees. Install lock ring and align nearest hole with pin on adjusting nut. Tighten locknut to 90 ft-lbs/127 Nm. Endplay should be .001-.010.” FTJ Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Back off 45 degrees. Align lock washer hole with pin on adjusting nut. Tighten locknut to 150 ft-lbs/203 Nm. Endplay should be .001-.006”. FTK Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Back off to 0. Retighten adjusting nut to 48 ft-lbs/ 66 Nm and then back off 135-150 degrees while rotating hub. Insert washer and tighten locknut to 65 ft-lbs/88 Nm. Bend washer tab over adjusting nut and locknut. FTL Using Spanner Locknut Wrench special tool, tighten adjusting nut to 70 ft-lbs/95 Nm. After 70 ft-lbs/95 Nm, nut will ratchet. Apply inward pressure on Spanner to disengage adjusting locknut splines and back off 180 degrees. Tighten adjusting nut to 15 ft-lbs/20 Nm and remove Spanner. Endplay should be 0-.006”. FTM Using Spanner Locknut Wrench special tool, tighten adjusting nut to 70 ft-lbs/95 Nm. After 70 ft-lbs/95 Nm, nut will ratchet. Apply inward pressure on Spanner to disengage adjusting locknut splines and back off 90 degrees. Tighten adjusting nut to 15 ft-lbs/20 Nm and remove Spanner. Endplay should be 0. FTA Tighten hub nut to 17-25 ft-lbs/22-29 Nm while turning wheel. Back off 1/2 turn and tighten to 18-20 in-lbs/2-3 Nm. FTN FTB Tighten hub nut to 22-25 ft-lbs/25-29 Nm while rotating hub in opposite direction. Back off 1/8 turn and install locknut and cotter pin. Tighten hub nut to 30 ft-lbs/40 Nm while turning wheel. Back off 2 turns and tighten to 17-24 ft-lbs/23-24 Nm. Loosen nut 180 degrees. Tighten nut to 17 in-lbs/2 Nm. FTO Tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Back off to 0. Tighten adjusting nut to 35 ft-lbs/48 Nm and back off 135-150 degrees. Align lock washer with keyway and pin on adjusting nut. Tighten locknut to 182 ft-lbs/247 Nm. Endplay should be 0-.006. FTP Tighten hub nut to 17-24 ft-lbs/22-34 Nm while turning wheel. Loosen nut 180 degrees and tighten to 17 in-lbs/ 2 Nm. FTQ Tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Back off 90 degrees. Align lock washer with keyway and pin on adjusting nut. Tighten locknut to 182 ft-lbs/ 247 Nm. FTR Tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Back off 90 degrees. Tighten wheel retaining nut to 16 in-lbs/1.8 Nm. Install key into spindle keyway by inserting the short leg into the aligned slot in nut. Press in until curved portion of retaining key is seated into counterbore of nut. Install cam assembly. Install: metal washer, plastic washer, then splined washer. Install C clip or lock ring. FTC Tighten hub nut to 17-25 ft-lbs/22-29 Nm while rotating hub. Install locknut and back off two slots of the nut. Install cotter pin. FTD Tighten hub nut to 17-25 ft-lbs/22-29 Nm while rotating hub. Back off 1/4 turn and install cotter pin. FTE Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Back off 90 degrees. Install lock ring and align nearest hole with pin on adjusting nut. Tighten locknut to 65 ft-lbs/88 Nm. Endplay should be .001-.010”. FTF Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Back off and retighten to 35 ft-lbs/47 Nm while rotating hub. Back off 1/2 turn. Assemble lock washer hole to pin on adjusting nut. Tighten locknut to 50 ft-lbs/68 Nm. Endplay should be .001-.010”. FTG Tighten adjusting nut to 65 ft-lbs/88 Nm while rotating hub. Back off 3/8 turn. Install lock washer with smooth side out. Tighten locknut to 100 ft-lbs/139 Nm. Bend two tabs of lock washer over adjusting nut and locknut. 30 Adjustment procedures FTS Using Spanner Locknut Wrench special tool, tighten adjusting nut to 70 ft-lbs/95 Nm. Hub will ratchet as torque is applied. Ratchet back 90 degrees and retighten to 15-20 ft-lbs/18-25 Nm. FT1 Using Spanner Locknut Wrench special tool, tighten adjusting nut to 60 ft-lbs/82 Nm. Hub will ratchet as torque is applied. Ratchet nut back 5 clicks (used bearing) or 7 clicks (new bearing). FTT Using Spanner Locknut Wrench special tool, tighten adjusting nut to 60 ft-lbs/82 Nm. Hub will ratchet as torque is applied. Ratchet nut back 5 clicks (used bearing) or 8 clicks (new bearing). FT2 Tighten hub nut to 17-24 ft-lbs/22-34 Nm while turning wheel. Loosen nut 175 degrees and tighten to 17 in-lbs/2 Nm. FT3 Tighten hub nut to 21 ft-lbs/28 Nm while turning wheel clockwise. Back off 180 degrees. While rotating brake disc, tighten to 17 in-lbs/2 Nm. FT4 With Ford axle using the Ford Axle Locknut Socket or equivalent, tighten the wheel hub nut to 70 ft-lbs/95 Nm while rotating wheel occasionally. Then back off the hub nut 180 degrees, apply inward pressure to the socket to separate the ratcheting components of the hub, and tighten the hub nut to 15 ft-lbs/20 Nm. Verify final bearing adjustment has zero endplay. FT5 Tighten hub nut to 21 ft-lbs/28 Nm while turning wheel. Loosen nut 175 degrees and tighten additional 18 in-lbs/ 2 Nm. FT6 Tighten hub nut to 30 ft-lbs/40 Nm while turning wheel. Back off 2 turns. While rotating brake disc, tighten to 21 ft-lbs/28 Nm. Loosen nut 175 degrees. Tighten to 17 in-lbs/ 2 Nm. FT7 For Dana Full Floating Axles, use Ford axle locknut socket, tighten the wheel hub nut to 70 ft-lbs (95 Nm) while rotating hub. Back off hub nut 90°. Apply inward pressure to the socket to separate the ratcheting components of the hub nut. Tighten hub nut 18 ft-lbs (24 Nm). Attach magnetically mounted dial indicator to the spindle end and place the indicator tip on outside of hub. Check for zero end play, the final bearing adjustment specification. FT8 Tighten drive nut to 74-110 ft-lbs/100-150 Nm, loosen 180°, then tighten to 175-202 ft-lbs/236-274 Nm. GMA Tighten hub nut to 12 ft-lbs/16 Nm while rotating wheel. Back off and finger tighten. Back off slightly to install cotter pin. GMB Snug hub nut while rotating wheel. Back off 1/4-1/2 turn and finger tighten. Install cotter pin. GMC Tighten hub nut to 15 ft-lbs/18 Nm while rotating wheel. Back off and finger tighten. Back off slightly to install cotter pin. GMD Tighten adjustment nut to 50 ft-lbs/68 Nm while rotating hub and drum. Back off 1/4 turn and tighten to 13 ft-lbs/ 17 Nm. Align nut slot with closest keyway. Insert key, retaining ring, and axle. Endplay should be .001-.010”. GME Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub and disc. Back off and retighten to 35 ft-lbs/47 Nm. Back off 135-150 degrees. Insert lock washer and bend one tab over adjusting nut. Install locknut and tighten to 65 ft-lbs/88 Nm. Bend tab of washer over locknut. Endplay should be .001-.010”. GMF Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub and drum. Back off nut to “just loose” (not more than one slot of lock or axle spindle) to align with keyway. Install key, retaining ring, and axle. FTU FTV FTW FTX Tighten the adjusting nut to 35 ft-lbs/47 Nm while turning hub. Back off 90 degrees. Retighten the adjusting nut to 16 in-lbs/1.8 Nm. Install lock washer so that the pin on the adjusting nut aligns with a hole on the washer. Torque locknut to 150 ft-lbs/203 Nm. Install bearing thrust spacer, needle thrust bearing, and axle shaft spacer. Clip snap ring to spindle. Tighten adjusting nut to 35 ft-lbs/47 Nm while turning hub. Back off 90 degrees. Retighten the adjusting nut to 16 in-lbs/1.8 Nm. Align the closest lug in the wheel bearing adjusting nut with the center of the spindle keyway slot. Advance nut to next lug as needed. Install the separate lock key in the spindle keyway under the adjusting nut. Install locknut needle bearing and thrust washer. Push cam assembly onto the locknut by lining up the key in the cam with the spindle keyway. Caution! Do not damage the separate lock key when aligning the spindle nut adjustment lug with the center of the spindle keyway slot. Also, do not damage the fixed cam when aligning the cam key with the spindle keyway. Tighten the adjusting nut to 35 ft-lbs/47 Nm while turning hub. Back off 90 degrees. Retighten the adjusting nut to 16 in-lbs/1.8 Nm. Install lock washer and tighten locknut to 150 ft-lbs/203 Nm. Endplay should be 0-.003”. Install axle shaft spacer and clip the snap ring to the end of the shaft. Tighten adjusting nut to 35 ft-lbs/47 Nm while turning hub. Back off 90 degrees. Retighten the adjusting nut to 16 in-lbs/1.8 Nm. Align the closest lug in the wheel bearing adjusting nut with the center of the spindle keyway slot. Advance nut to next lug as needed. Install the separate lock key in the spindle keyway under the adjusting nut. Install the two-thrust spacer and push or press the cam assembly onto the locknut by lining up the key in the cam with the spindle keyway. Caution! Do not damage the separate lock key when aligning the spindle nut adjustment lug with the center of the spindle keyway slot. Also, do not damage the fixed cam when aligning the cam key with the spindle keyway. FTY Tighten hub nut to 30 ft-lbs/40 Nm while turning wheel. Back off 2 turns. While rotating brake disc, tighten to 1724 ft-lbs/22-34 Nm. Loosen nut 175 degrees. Tighten nut to 17 in-lbs/2 Nm. FTZ Using Spanner Locknut Wrench special tool, tighten adjusting nut to 70 ft-lbs/95 Nm. After 70 ft-lbs/95 Nm, nut will ratchet. Apply inward pressure on Spanner to disengage adjusting locknut splines and back off 90 degrees. Tighten adjusting nut to 18 ft-lbs/24 Nm and remove Spanner. Final bearing adjustment has zero end play. Maximum torque to rotate bearing is 20 in-lbs/2.3 Nm. 31 Adjustment procedures GMG GMH GMR Tighten to 74 ft-lbs/100 Nm, loosen, tighten to 15 ft-lbs/ 20 Nm, turn an additional 90 degrees. GMS Tighten to 111 ft-lbs/150 Nm. Back off 45 degrees and retighten to 184 ft-lbs/250 Nm. HAA Tighten hub nut to 22 ft-lbs/30 Nm. Back off and retighten to 4 ft-lbs/6 Nm. HIA Tighten hub nut to 15 ft-lbs/20 Nm. Back off and retighten to 4 ft-lbs/6 Nm. HIB Tighten the hub bearing nut by the following procedures. Hub bearing nut must be fastened with a torque of 202 ft-lbs/274 Nm and front hub must be rotated 3 times for secure placement of hub bearing. Unfasten hub bearing nut until its tightening torque is 0 ft-lbs/0 Nm. Hub bearing nut must be fastened again with torque 144 ft-lbs/196 Nm. Assemble split pin. If the direction of split pin is not in line with the hole of knuckle, unfasten hub bearing nut within 30° and assemble split pin. IUA Tighten the hub nut to 22 ft-lbs/29 Nm, then fully loosen. Install a spring scale to one of the wheel nut studs. Tighten the hub nut until the scale reads: 4.5-5.5 lbs/22.5 kg for new bearing and seal; 2.5-4.0 lbs/1.2-1.8 kg for a used bearing and seal. IUB Tighten the hub nut to 22 ft-lbs/29 Nm, then fully loosen. Install a spring scale to one of the wheel nut studs. Tighten the hub nut until the scale reads: 1.8-2.2 lbs/2025 kg. IUC Tighten the hub nut to 22 ft-lbs/30 Nm, then fully loosen. Tighten nut finger tight and install cotter pin. IUD Tighten the hub nut until 1.1-3.3 lbs/0.5-1.5 kg of force is required to turn the hub with a spring scale attached to a lug nut stud. IUE Tighten the hub nut to 22 ft-lbs/29 Nm. Turn the hub 2-3 times and loosen the nut. Finger tighten the nut. Tighten the nut further until 2.2 lbs/1.0 kg of force is required to turn the hub with a spring scale attached to a lug stud. IUF Tighten the hub nut to 22 ft-lbs/29 Nm. Turn the hub 2-3 times and loosen the nut. Finger tighten the nut. Tighten the nut further until 3.3 lbs/1.5 kg of force is required to turn the hub with a spring scale attached to a lug stud. Align the holes in the lock washer with the nut. Turn the nut slightly if needed. JGA Tighten hub nut to eliminate endplay. Back off nut slightly to provide endplay of .001-.003”. Tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Back off and retighten to 35 ft-lbs/47 Nm. Back off 1/4 max. Holes in washer must align with tang in slot in spindle. Tighten locknut to 50 ft-lbs/68 Nm. Endplay should be .001-.010”. JGB Tighten hub nut to eliminate endplay. Back off nut slightly to provide endplay of .002-.005”. JPA Tighten the hub nut to 21 ft-lbs/28 Nm while rotating the wheel. Back off 1/2 turn and tighten to 19 in-lbs/1.5 Nm. Tighten adjustment nut to 52 ft-lbs/70 Nm while rotating hub and drum. Loosen nut. Tighten nut until it contacts bearing cone. Torque on nut must be zero to finger tight. Back off nut, if necessary, to align nut slot with closest keyway. Do not back off more than one slot to align keyway. Insert key, retaining ring, and axle shaft. JPB Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Repeat several times. Loosen the adjusting nut 1/6 turn while rotating hub. Install lock washer. Align one of the holes with the peg on the adjusting nut. Install the locknut and tighten to 50 ft-lbs/68 Nm. Endplay should be 0. Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Back off 1/8 turn while rotating hub. Insert lock washer and bend one tab over adjusting nut. Install locknut and tighten to 250 ft-lbs/339 Nm. Bend tab of washer over locknut. Endplay should be “just loose.” Tighten adjusting nut to 90 ft-lbs/120 Nm while rotating hub. Back off 1/8 turn while rotating hub. Insert lock washer and bend one tab over adjusting nut. Install locknut and tighten to 250 ft-lbs/339 Nm. Bend tab of washer over locknut. Endplay should be “just loose.” GMI Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Back off to “just loose.” Torque on nut when contacting bearing must be 0 or finger tight. Insert key into nut through slot or back off slightly. Install snap ring and axle shaft. GMJ Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Back off and retighten to 35 ft-lbs/47 Nm. Back off 1/4 turn and insert washer. Install locknut and tighten to 65 ft-lbs/88 Nm. Endplay should be .025-.250”. GMK Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating hub. Back off 1/8 turn and insert washer. Install locknut and tighten to 175 ft-lbs/235 Nm. GML Tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Back off and retighten to 35 ft-lbs/47 Nm. Back off 3/8 turn. Install ring and torque locknut to 160 ft-lbs/ 217 Nm minimum. Tang on ring must press through slot on spindle. Hole in pin must align with locknut, turn adjusting nut to align. Endplay should be .001-.010”. GMM GMN GMO GMP GMQ 32 Tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Back off and retighten to 50 ft-lbs/68 Nm. Back off to 0. Install ring and torque locknut to 160 ft-lbs/217 Nm minimum. Tang on ring must press through slot on spindle. Hole in pin must align with locknut, turn adjusting nut to align. Endplay should be .001-.010”. Tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Back off and retighten to 35 ft-lbs/47 Nm. Back off 3/8 max. Align nearest hole in adjusting nut lock with adjusting nut pin. Tighten locknut to 80 ft-lbs/108 Nm. Endplay should be .001-.010. Tighten adjusting nut to 50 ft-lbs/68 Nm while turning hub. Back off and retighten to 35 ft-lbs/47 Nm. Back off 3/8 max. Insert lock washer and tighten locknut to 65 ft-lbs/ 88 Nm. Bend one tab over adjusting nut and one over locknut. Endplay is .001-.010. Adjustment procedures JPC Tighten adjusting nut while rotating hub. Repeat several times. After tightening nut, back off 1/6-1/4 turn. Install washer and locknut. Bend one tab of the washer over the locknut. NDB Tighten hub nut to 18-22 ft-lbs/22-26 Nm. Back off and tighten again. Back off up to 60 degrees and install cotter pin. NDC KIA Tighten lock nut against hub to set bearing preload. Use spring scale on hub wheel stud to measure bearing preload which should be 10 in-lbs/1-3 Nm. Tighten hub nut to 29-33 ft-lbs/34-40 Nm. Back off and tighten again. Back off up to 90 degrees and install cotter pin. NDD Tighten hub nut to 25-29 ft-lbs/30-34 Nm. Back off and tighten again. Back off up to 45 degrees and install cotter pin. KIB Tighten lock nut to 20 ft-lbs/27 Nm. Loosen nut slightly until it can be turned by hand. Use spring scale on hub wheel stud to measure bearing grease seal drag. Add grease seal drag reading to value of .6-1.9 lbs/2.6-8.5 Nm. Turn adjusting nut slowly until specified preload is obtained. After preload adjustment, stake nut in position. NDE Tighten hub nut to 22-25 ft-lbs/25-29 Nm. Back off and tighten again. Back off up to 90 degrees and install cotter pin. NDF Tighten hub nut to 16-17 ft-lbs/19-21 Nm. Back off and tighten again. Back off up to 40-70 degrees and install cotter pin. NDG Tighten adjusting nut to 58-72 ft-lbs/78-98 Nm while turning hub. Back off to 0. Tighten adjusting nut to 4.3-13 in-lbs/0.5-1.5 Nm. NDH Tighten adjusting nut to 58-72 ft-lbs/78-98 Nm while turning hub. Back off to 0. Tighten adjusting nut until force to turn hub with a spring scale attached to a lug stud is 1.6-4.7 lbs/0.7-2.1 kg. POA While turning wheel tighten adjusting nut slightly. Back off adjusting nut until brake disc can just be moved using finger pressure on a screwdriver. Tighten adjusting nut retaining screw to 11 ft-lbs. SBA Tighten in three steps; 111 ft-lbs (150 Nm), then loosen 45°, final torque to 185 ft-lbs (250 Nm). SNA Tighten nut to 74-118 ft-lbs/100-160 Nm, loosen, tighten to 15 ft-lbs/20 Nm, turn an additional 90 degrees. SUA Tighten adjusting nut while turning wheel. Back off 1/8 turn and finger tighten. SZA Tighten adjusting nut while turning wheel to 58 ft-lbs/80 Nm. Loosen nut. Tighten nut to 9 ft-lbs/12.5 Nm. TAA Tighten adjusting nut to 43 ft-lbs/60 Nm. Turn the hub right and left several times and retighten to 43 ft-lbs/60 Nm. Loosen the nut and finger tighten. Tighten adjusting nut to 4 ft-lbs/6 Nm. Force to turn hub with a spring scale attached to a lug stud should be 6.4-12.6 lbs/2.9-5.7 kg. Insert lock washer. Tighten locknut to 47 ft-lbs/64 Nm. Recheck turning torque with the spring scale. TAB Tighten adjusting nut to 43 ft-lbs/60 Nm. Turn the hub right and left several times and loosen the adjusting nut. Retighten to 18 ft-lbs/25 Nm. Force to turn hub with a spring scale attached to a lug stud should be 6.4-12.6 lbs/2.9-5.7 kg. Install washer and locknut. Tighten to 35 ft-lbs/47 Nm. Axial play should be 0. TAC Tighten adjusting nut to 43 ft-lbs/60 Nm. Turn the hub right and left several times and loosen the adjusting nut. Retighten to 35-60 in-lbs/4-6 Nm. Force to turn hub with a spring scale attached to a lug stud should be 2.2-8.6 lbs/ 1.0-3.9 kg. Install washer and locknut. Tighten to 65 ft-lbs/ 90 Nm. TAD Tighten adjusting nut to 25 ft-lbs/34 Nm while rotating hub. Back off to 0. Tighten adjusting nut until 1.3-4 lbs/ 0.6-1.8 kg of force is required to turn hub with a spring scale attached to a lug stud. LRA LRB LRC Tighten the hub nut to 50 ft-lbs/61 Nm, then back off 90 degrees. Tighten the hub nut 3 ft-lbs/4 Nm. Endplay should be .004. Install lock nut and tighten to 50 ft-lbs/ 61 Nm. While slowly rotating hub, tighten the hub nut until all endplay is removed, then back off 180 degrees. Tighten the hub nut 13-15 in-lbs. Endplay should be .0005-.004”. Install lock nut and tighten to 70-80 ft-lbs/95-108 Nm. Tighten the hub nut to 37 ft-lbs/50 Nm, then back off 90 degrees. Tighten the hub nut 7 ft-lbs/10 Nm. Endplay should be .0004”. Install lock nut and tighten to 37 ft-lbs/ 50 Nm. LRD Tighten the hub nut to 199 ft-lbs/270 Nm. Tighten the hub nut to 243 ft-lbs/330 Nm. Tighten the hub nut an additional 30 degrees. Stake hub nut. MAA Tighten locknut to 18-22 ft-lbs/25-29 Nm. Turn the hub 2-3 times. Loosen the locknut and finger tighten. Turn the locknut until torque to turn hub with a spring scale attached to a lug stud is 1.3-4.3 in-lbs/.15-.50 kg. Stake locknut. MAB Tighten locknut to 14-18 ft-lbs/20-25 Nm. Turn the hub 2-3 times. Loosen the locknut and finger tighten. Turn the locknut until force to turn hub with a spring scale attached to a lug stud is .77-1.92 lbs/.35-.87 kg. MAC Tighten locknut to 14-22 ft-lbs/20-29 Nm. Turn the hub 2-3 times. Loosen the locknut and finger tighten. Turn the locknut until force to turn hub with a spring scale attached to a lug stud is 1.3-2.4 lbs/.60-1.1 kg. MAD Tighten locknut. Turn the hub 2-3 times. Loosen the locknut and finger tighten. Turn the locknut until force to turn hub with a spring scale attached to a lug stud is 1.3-2.6 lbs/.60-1.2 kg. Install bearing set plate and bolts; spacer, then snap ring. MA3 Tighten locknut to 23-29 ft-lbs/32-39 Nm. Mark lockbolt at one point and tighten it further until marking has moved 85-95 degrees. MIA Tighten hub nut to 14 ft-lbs/20 Nm, rotate wheel 2-3 turns and back off nut. Tighten hub nut to 7 ft-lbs/10 Nm, rotate wheel, retorque to 7 ft-lbs/10 Nm. NDA Tighten hub nut to 25-29 ft-lbs/30-34 Nm. Turn hub several times in each direction to seat bearings, then tighten again to 25-29 ft-lbs/30-34 Nm. Back off 45 degrees and install cotter pin. 33 Adjustment procedures TAE Tighten adjusting nut to 21 ft-lbs/28 Nm while rotating wheel. Back off and finger tighten. Tighten slightly to install cotter pin. Axial endplay should be .002”. TAF Tighten adjusting nut to 22 ft-lbs/29 Nm while rotating wheel. Back off to 0. Tighten adjusting nut until 0-2.6 lbs/ 0-1.2 kg of force is required to turn hub with a spring scale attached to a lug stud. TAG Tighten adjusting nut to 43 ft-lbs/59 Nm while turning wheel. Back off to 0. Tighten adjusting nut to 11 ft-lbs/15 Nm. Force to turn hub with a spring scale attached to a lug stud should be 4.6-7.9 lbs/2.1-3.6 kg. Install washer and torque locknut to 35 ft-lbs/47 Nm. TAH Tighten adjusting nut to 43 ft-lbs/59 Nm while turning wheel. Back off to 0. Tighten adjusting nut to 38-57 in-lbs/4.3-6.5 Nm. Force to turn hub with a spring scale attached to a lug stud should be 9.5-15 lbs/42-67 N. Install washer and tighten locknut to 47 ft-lbs/64 Nm. VOA Tighten adjusting nut to 50 ft-lbs/68 Nm while rotating wheel. Back off 1/3 turn. Loosen slightly and install cotter pin. VOB Tighten adjusting nut to 15 ft-lbs/20, then 33 ft-lbs/45 Nm. Tighten an additional 60 degrees. VWA Tighten adjusting nut to 7 ft-lbs/10 Nm. Back off and finger tighten. Install cotter pin. VWB Tighten the hub nut gradually while turning the thrust washer with a screwdriver tip. Do not bend or pry with the screwdriver. Tighten the hub nut to the point where the washer cannot be turned and back off slightly. Install the locknut and cotter pin. VWC Tighten to 148 ft-lbs/200 Nm. Loosen. Tighten to 37 ftlbs/50 Nm, then turn nut an additional 60 degrees. VWD Tighten to 148 ft-lbs/200 Nm. Loosen. Tighten to 37 ftlbs/50 Nm, then turn nut an additional 30 degrees. VWE With hex head bolt, 148 ft-lbs/200 Nm. Then turn nut an additional 180 degrees. With 12 point bolt, 52 ft-lbs/70 Nm. Then turn nut an additional 90 degrees. VWF With hex head bolt, 133 ft-lbs/180 Nm. Then turn nut an additional 180 degrees. VWG With hex head bolt, 133 ft-lbs/180 Nm. Then turn nut an additional 180 degrees. With 12 point bolt, 52 ft-lbs/70 Nm. Always replace with a new bolt. VWH 12 point bolt without ribs: With vehicle on ground, loosen 90 degrees. With vehicle off the ground and brakes applied, remove bolt. Tighten new bolt 148 ft-lbs/ 200 Nm. Lower vehicle onto its wheels and tighten an additional 180 degrees. 12 point bolt with ribs: With vehicle on ground, loosen 90 degrees. With vehicle off the ground and brakes applied, remove bolt. Tighten new bolt 52 ft-lbs/70 Nm with vehicle off the ground. Lower vehicle onto its wheels and tighten an additional 90 degrees. Hex bolt: Tighten bolt 148 ft-lbs/200 Nm. Lower vehicle onto its wheels and tighten an additional 180°. VWI With hex head bolt: With vehicle on ground, loosen 90 degrees. With vehicle off the ground and brakes applied, remove bolt. Tighten new bolt 148 ft-lbs/200 Nm. Lower vehicle onto its wheels and tighten an additional 180 degrees. With 12 point bolt: Use special tool XZN18-T10162. 12 point bolt without ribs, tighten new bolt 148 ft-lbs/ 200 Nm with vehicle off the ground. Lower vehicle onto its wheels and tighten an additional 180 degrees. 12 point bolt with ribs, tighten new bolt 52 ft-lbs/70 Nm with vehicle off the ground. Lower vehicle onto its wheels and tighten an additional 90 degrees. VWJ With vehicle on ground, loosen 90 degrees. With vehicle off the ground and brakes applied, remove bolt. With 12 point bolt, tighten new bolt 148 ft-lbs/200 Nm. Lower vehicle onto its wheels and tighten an additional 90 degrees. VWK 12 point bolt: With vehicle on ground, loosen 90 degrees. With vehicle off the ground and brakes applied, remove bolt. Tighten new bolt 111 ft-lbs/150 Nm. Lower vehicle onto its wheels and tighten an additional 369 ft-lbs/500 Nm. VWL With grade 10.9 bolt: Tighten 52 ft-lbs/70 Nm plus an additional 90 degrees. With grade 8.8 bolt: Tighten 148 ft-lbs/200 Nm plus an additional 180 degrees. 34 The Power of Knowledge Engineering SKF is your source for a wide range of products covering various industries. From automotive to heavy duty to industrial applications, SKF offers a solution to keep your machines operating and your business profitable. www.vsm.skf.com Download literature, access technical tips and view product information For catalog related questions, please email: vsm.updates@skf.com Mobile parts look up Access our mobile parts look up website for all the latest part numbers at www.skfpartsinfo.com View detailed technical and product videos at www.skfpartsinfo.tv Follow us on Twitter @skfpartsinfo to stay on top of all the latest technical and product information. SKF Parts Info Apps Download SKF apps for access to product information, cross reference, instruction sheets, application data and brochures. ® SKF is a registered trademark of the SKF Group. © SKF Group 2014 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. Publication 457377 (rev. 05/14) Printed in U.S.A. SKF VSM NA 890 N. State Street Suite 200 Elgin, IL 60123 800-882-0008 www.skfpartsinfo.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Create Date : 2016:02:08 09:24:13+01:00 Creator : Adobe InDesign CS6 (Windows) Modify Date : 2016:02:08 09:24:13+01:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Instance ID : uuid:3776f387-2fdb-4413-8b6c-d9fc42dd18c2 Original Document ID : adobe:docid:indd:485efebb-31c6-11df-a52f-a44796af92f9 Document ID : xmp.id:D2AA2CFDF5D5E3118203B85AF1E0B450 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:D1AA2CFDF5D5E3118203B85AF1E0B450 Derived From Document ID : xmp.did:40AF631125DFE211AFA9ACFB32265325 Derived From Original Document ID: adobe:docid:indd:485efebb-31c6-11df-a52f-a44796af92f9 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2014:05:07 09:44:04-05:00 Metadata Date : 2016:02:05 15:04:32-06:00 Creator Tool : Adobe InDesign CS6 (Windows) Format : application/pdf Producer : Adobe PDF Library 10.0.1 Trapped : False Page Layout : SinglePage Page Mode : UseNone Page Count : 35EXIF Metadata provided by EXIF.tools