65HM167 50HM67 OM E

User Manual: 65HM167

Open the PDF directly: View PDF .
Page Count: 74

Download
Open PDF In Browser	View PDF

50HM67_EN.book Page 1 Wednesday, February 14, 2007 4:18 PM

Integrated High Definition
DLP® Projection Television
HIGH-DEFINITION TELEVISION

50HM67
57HM167
65HM167

For an overview of steps for setting up your new TV, see page 10.
Note: To display a High Definition picture, the TV must be receiving a
High Definition signal (such as an over-the-air High Definition TV
broadcast, a High Definition digital cable program, or a High Definition
digital satellite program). For details, please contact your TV antenna
installer, cable provider, or satellite provider.
Note: If the TV is powered off and then quickly on again when the
lamp unit is hot, it may take several minutes for the picture to appear
on-screen. This is a property of DLP® TV lamp technology and is NOT
a sign of malfunction. For details, see "IMPORTANT NOTICE ABOUT
HOT LAMP RESTART" on page 6.
© 2007 TOSHIBA CORPORATION
All Rights Reserved

Owner’s Record
The model number and serial number are on the back of
your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
Model number:
Serial number:
YC/N VX1A00039100

HM67 (E/F) Web 213:276

50HM67_EN.book Page 2 Wednesday, February 14, 2007 4:18 PM

Dear Customer,
Thank you for purchasing this Toshiba TV. This manual will
help you use the many exciting features of your new TV. Before
operating the TV, please read this manual completely, and
keep it nearby for future reference.

Safety Precautions
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.

WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL. (This does not apply to “Lamp
unit replacement and care” in Chapter 9.)
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

Lamp Unit Replacement

CAUTION: This television is for use only with
the Toshiba stand indicated below. Use with other
carts or stands is capable of resulting in
instability, causing possible injury.
Television
Stand Model
50HM67
ST 5067
57HM167
ST 57167
65HM167
ST 65167

NOTE TO CATV INSTALLERS IN THE U.S.A.
This is a reminder to call the CATV system installer’s attention
to Article 820-40 of the U.S. NEC, which provides guidelines for
proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical. For additional
antenna grounding information, see items 28 and 29 on page 4.

Child Safety
It Makes A Difference
Where Your TV Stands
Congratulations on your purchase!
As you enjoy your new TV, keep these safety tips in mind:

The Issue
a If you are like most consumers, you have a TV in your home.
Many homes, in fact, have more than one TV.
a The home theater entertainment experience is a growing trend,
and larger TVs are popular purchases; however, they are not
always supported on the proper TV stands.
a Sometimes TVs are improperly secured or
inappropriately situated on dressers, bookcases,
shelves, desks, audio speakers, chests, or carts.
As a result, TVs may fall over, causing
unnecessary injury.

Toshiba Cares!
a The consumer electronics industry
is committed to making home
entertainment enjoyable and safe.
a The Consumer Electronics Association
formed the Home Entertainment Support
Safety Committee, comprised of TV and
consumer electronics furniture manufacturers, to
advocate children’s safety and educate consumers
and their families about television safety.

The lamp in this product has a limited service life. The length
of service life varies depending on product use and user
settings. If you use the lamp beyond its service life:
• you may notice a reduction in the colors and/or brightness
of the picture, at which time you should replace the lamp
unit; and
• the strength of the quartz glass in the lamp will be reduced
and the lamp may rupture. If the lamp ruptures, the TV will
not operate until the lamp unit is replaced.
Dispose of the used lamp unit by the approved method for
your area.
See “Lamp unit replacement and care”
in Chapter 9.

Note: The lamp unit contains mercury.
Disposal of mercury may be regulated due to
environmental considerations. For disposal or recycling
information, contact your local authorities or the Electronic
Industries Alliance (www.eiae.org).

Tune Into Safety
a One size does NOT fit all! Use appropriate furniture large
enough to support the weight of your TV (and other electronic
components).
a Use appropriate angle braces, straps, and anchors to secure your
furniture to the wall (but never screw anything directly into the TV).
a Carefully read and understand the other enclosed
instructions for proper use of this product.
a Do not allow children to climb on or play with furniture and TVs.
a Avoid placing any item on top of your TV (such as a VCR, remote
control, or toy) that a curious child may reach for.
a Remember that children can become excited while watching
a program and can potentially push or pull a TV over.
a Share our safety message about this hidden hazard of the home
with your family and friends. Thank you!
2500 Wilson Blvd.
Arlington, VA 22201 U.S.A.
www.CE.org
CEA is the Sponsor, Producer and
Manager of the International CES ®

HM67 (E/F) Web 213:276

50HM67_EN.book Page 3 Wednesday, February 14, 2007 4:18 PM

Important Safety Instructions
1)

Read these instructions.

2)
3)
4)

Keep these instructions.
Heed all warnings.
Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

Do not defeat the safety purpose of Wide blade
the polarized or grounding type
plug. A polarized plug has two blades
with one wider than the other.
A grounding type plug has two blades
and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protect the power cord from being walked
on or pinched, particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.

Additional Safety Precautions
14a) Item 14 does not apply to “Lamp unit replacement and
care” in Chapter 9.
14b) CAUTION: If the TV is dropped and the cabinet or
enclosure surface has been damaged or the TV does
not operate normally, take the following precautions:
• ALWAYS turn off the TV and unplug the power cord to
avoid possible electric shock or fire.
• To prevent personal injury, never handle the damaged
television.
• ALWAYS contact a service technician to inspect the TV
any time it has been damaged or dropped.

15) CAUTION:
• To reduce the risk of electric shock, do not use the
polarized plug with an extension cord, receptacle, or
other outlet unless the blades can be inserted
completely to prevent blade exposure.
• To prevent electric shock, match wide blade of plug to
wide slot; fully insert.
16) WARNING: This product contains a lamp to project
the picture, and requires special safety precautions:
• See Chapter 9 for instructions on lamp unit replacement
and care.
• DO NOT attempt to service this product except as
specified in the “Lamp unit replacement and care”
section in Chapter 9. The only user-serviceable item in
this product is the lamp unit.
17) WARNING:
To prevent the spread of fire, keep candles or other open
flames away from this product at all times.

Installation, Care, and Service
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
18) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
19)

DANGER: RISK OF
SERIOUS PERSONAL
INJURY, DEATH, OR
EQUIPMENT DAMAGE!
Never place the TV on an unstable cart,
stand, or table. The TV may fall, causing
serious personal injury, death, or serious
damage to the TV.

20) Never place or store the TV in direct sunlight; areas
subject to excessive dust or vibration; or locations with
temperatures at or below 41°F (5°C). See “Specifications”
section on page 66 on operating conditions.
21) Always place the TV on the TV stand provided with the TV
or on a sturdy, level, stable surface that can safely support
the size and weight of the unit. See “Notice of possible TV
stand instability” and “Child Safety” on page 2.
22) The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
23) Always place the back of the television at least one (1)
inch away from any vertical surface (such as a wall) to
allow proper ventilation.

(continued)

HM67 (E/F) Web 213:276

50HM67_EN.book Page 4 Wednesday, February 14, 2007 4:18 PM

24) Never block or cover the slots or openings in the TV
cabinet back, bottom, and sides. Never place the TV:
• on a bed, sofa, rug, or similar surface;
• too close to drapes, curtains, or walls; or
• in a confined space such as a bookcase, built-in
cabinet, or any other place with poor ventilation.
The slots and openings are provided to protect the TV
from overheating and to help maintain reliable operation of
the TV.
25) Never allow anything to rest on or roll over the power cord,
and never place the TV where the power cord is subject to
wear or abuse.
26) Never overload wall outlets and extension cords.
27) Always operate this equipment from a 120 VAC, 60 Hz
power source only.
28) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
Antenna lead-in wire

Ground clamp

Electric service equipment

Ground clamps

29)

Antenna discharge unit
(NEC Section 810-20)

Grounding conductors
(NEC Section 810-21)

Power service grounding
electrode system (NEC Art 250 Part-H)

DANGER: RISK OF SERIOUS
PERSONAL INJURY OR DEATH!
• Use extreme care to make sure you are never in a
position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.
• Never attempt to install any of the following during
lightning activity: a) an antenna system; or b) cables,
wires, or any home theater component connected to an
antenna or phone system.

32)

WARNING:
RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind into the TV
cabinet slots.

33) If the air temperature rises suddenly (for example, when
the TV is first delivered), condensation may form on the
lenses. This can make the picture appear distorted or the
color appear faded. If this happens, turn off the TV for 6 to
7 hours to allow the condensation to evaporate.
34) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
35) During normal use, the TV may make occasional snapping
or popping sounds. This is normal, especially when the
unit is being turned on or off. If these sounds become
frequent or continuous, unplug the power cord and contact
a Toshiba Authorized Service Center.
36) Special care for DLP® (Digital Light Processing) units:
• The lamp unit in this product has a limited service life.
The length of service life varies depending on product
use or user settings. If you use the lamp beyond its
service life:
• you may notice a reduction in the colors and/or
brightness of the picture, at which time you should
replace the lamp unit; and
• the strength of the quartz glass in the lamp will be
reduced and the lamp may rupture. If the lamp ruptures,
the TV will not operate until the lamp unit is replaced.
See “Lamp unit replacement and care” in Chapter 9.
• Dispose of the used lamp unit by the approved method
for your area.
•
The lamp unit contains mercury. Disposal of
mercury may be regulated due to
environmental considerations. For disposal or
recycling information, please contact your
local authorities or the Electronic Industries
Alliance (www.eiae.org).

Service
37)

WARNING:
RISK OF ELECTRIC SHOCK!

Care
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
30) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.
31) Always unplug the TV before cleaning. Never use liquid or
aerosol cleaners. Clean only with a soft, dry cloth. Do not
spray volatile compounds, such as insecticide, on the
cabinet. This may discolor or damage the cabinet.

Never attempt to service the TV yourself, except as
specified in the “Lamp unit replacement and care” section
in Chapter 9. Opening and removing the covers may
expose you to dangerous voltage or other hazards. Failure
to follow this WARNING may result in death or serious
injury. Refer all servicing not specified in this manual to a
Toshiba Authorized Service Center.
38) If you have the TV serviced:
• Ask the service technician to use only replacement
parts specified by the manufacturer.
• Upon completion of service, ask the service technician
to perform routine safety checks to determine that the
TV is in safe operating condition.
DLP® and the DLP logo are registered trademarks of Texas
Instruments.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 5 Wednesday, February 14, 2007 4:18 PM

39) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the TV.
Note: The lamp unit contains mercury. Disposal of
mercury may be regulated due to environmental
considerations. Dispose of the used lamp unit by the
approved method for your area.
For disposal or recycling information, please contact your
local authorities or the Electronic Industries Alliance
(www.eiae.org).

ENERGY STAR ® qualified television. Products
that earn the ENERGY STAR prevent green
house gas emissions by meeting strict
energy efficiency guidelines set by the U.S.
Environmental Protection Agency and the U.S.
Department of Energy. ENERGY STAR and the
ENERGY STAR mark are registered U.S. marks.

FCC Declaration of Conformity
Compliance Statement
(Part 15):
The Toshiba 50HM67, 57HM167, and 65HM167 Televisions
comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
The party responsible for compliance to these rules is:
Toshiba America Consumer Products, L.L.C.
82 Totowa Rd. Wayne, NJ 07470.
Ph: 1-800-631-3811
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
removing and applying power to the equipment, the user is
encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the
receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Caution: Changes or modifications to this equipment not
expressly approved by Toshiba could void the user’s authority
to operate this equipment.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 6 Wednesday, February 14, 2007 4:18 PM

Important notes about your
DLP® projection TV
1) The light source for this TV is a projection lamp unit with a
limited service life. When the lamp wears out, the picture
may become dark or black or the lamp may fail, at which time
you must replace the lamp unit (- “Lamp unit replacement
and care” on pages 63–65).
2) When the lamp mode is set to Low Power, every time the
TV is powered on, the lamp will initially be in High Bright
mode but will switch to Low Power mode after a short
period of time. You may notice a change in screen brightness
when this happens. This is normal and is not a sign of
malfunction (- page 57 for details).
3) Every time the TV is powered on, it may take several minutes
for the picture to obtain full brightness (- “IMPORTANT
NOTICE ABOUT HOT LAMP RESTART,” at right).
4) The TV’s display is manufactured using an extremely high
level of precision technology; however, an occasional pixel
(dot of light) may show constantly on the screen. This is a
structural property of DLP® (Digital Light Processing®)
technology and is not a sign of malfunction. Such pixels are
not visible when the picture is viewed from a normal viewing
distance.
5) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture quality may
be affected by your viewing position and length of viewing
time. If you sit too closely to the TV for too long, you may
suffer from eye fatigue. See item 30 under “Care” on page 4.
6) Depending on the media you are viewing, it is possible,
although unlikely, that a limited number of viewers may see
a “rainbow effect” on the screen, which can, in rare instances,
result in eye fatigue. This is a rare occurrence related to
DLP® technology and is not a sign of TV malfunction.
7)
This TV contains several cooling fans to moderate
the internal temperature. You may be able to hear
the fans for several minutes after the TV is turned
off. This is a function of the Power-On Mode
feature and is not a sign of TV malfunction. You can set
the Power-On Mode feature to stop the fans as soon as the
TV is powered off. See “Setting the Power-On Mode
feature” (- page 35).
8) The yellow and blue LED lights at the bottom center of the
TV front indicate your TV’s current status. If either light
flashes, see “LED indications” (- page 62).
9) Every time the TV power cord is plugged in, the yellow LED
will blink until the TV enters standby mode (plugged in but
not powered on). This is normal and is not a sign of
malfunction.

“Voice announce” feature
When certain non-standard conditions occur, the LEDs
on the TV will blink and the TV will play a recorded
“voice announcement” describing the condition (see the
LED indication table on page 62 for the specific conditions
that include a voice announcement).
To repeat the voice announcement and hear additional
information, press the MENU button on the TV while the
LEDs are blinking.

IMPORTANT NOTICE ABOUT HOT LAMP RESTART
When the TV has been powered on long enough for the lamp
unit to get hot, it may take several minutes for the picture to
appear in the following situations:

• When the Power-On Mode feature is set to PowerSaving and you turn the TV off and then on again
within a few minutes; or
• If the TV is on when a short-term power failure, power
surge, or other similar power failure occurs, such that
the TV loses and regains power within a few minutes.
This is a property of DLP® TV lamp technology and is
NOT a sign of malfunction.
If this occurs, the yellow LED on the TV front panel will blink
(and the blue LED will be lit solid) until the TV is finished
restarting the lamp and the normal picture appears. If both
LEDs are blinking, you will need to turn the TV off and then
on again to restart the lamp.

Trademark Information
• WOW, SRS and l symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
• Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
• HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
• DLP® and the DLP logo are registered trademarks of Texas
Instruments.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 7 Wednesday, February 14, 2007 4:18 PM

Contents
Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Welcome to Toshiba . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Features of your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Overview of steps for installing, setting up, and using
your new TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
TV front and side panel controls and connections . . . . . . . . 11
TV back panel connections. . . . . . . . . . . . . . . . . . . . . . . . . . 12

Chapter 2: Connecting your TV . . . . . . . . . . . . . . . . . . . . . . .13
Overview of cable types . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
About the connection illustrations . . . . . . . . . . . . . . . . . . . . 13
Connecting a VCR and antenna or Cable TV
(no Cable box) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Connecting a VCR with S-video and a cable box . . . . . . . . 15
Connecting a DVD player with ColorStream®
(component video), a VCR, and a satellite receiver . . . . . . . 16
Connecting a device to the IR OUT infrared terminal using
the IR blaster cable for IR pass-through device
control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Connecting a camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting an HDMI™ or DVI device to the HDMI
input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Connecting a digital audio system . . . . . . . . . . . . . . . . . . . . 20
Connecting an audio system . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting a personal computer (PC) . . . . . . . . . . . . . . . . . 21

Chapter 3: Using the remote control . . . . . . . . . . . . . . . . . . .22
Preparing the remote control for use. . . . . . . . . . . . . . . . . . . 22
Installing the remote control batteries . . . . . . . . . . . . . . . . . 22
Remote control effective range. . . . . . . . . . . . . . . . . . . . . . . 22
Learning about the remote control . . . . . . . . . . . . . . . . . . . . 23
Using the remote control to control your other devices . . . . 24
Remote Control functional key chart . . . . . . . . . . . . . . . . . . 25
Programming the remote control to control your other
devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Remote control codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Chapter 4: Menu layout and navigation . . . . . . . . . . . . . . . . .29
Main menu layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Setup/Installation menu layout . . . . . . . . . . . . . . . . . . . . . . . 30
Navigating the menu system. . . . . . . . . . . . . . . . . . . . . . . . . 30

Chapter 5: Setting up your TV. . . . . . . . . . . . . . . . . . . . . . . .31
Selecting the menu language . . . . . . . . . . . . . . . . . . . . . . . . 31
Configuring the antenna input source for the ANT
terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Programming channels into the TV’s channel memory . . . . 32
Programming channels automatically . . . . . . . . . . . . . . 32
Manually adding and deleting channels in the channel
memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Labeling channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Setting the HDMI™ audio mode . . . . . . . . . . . . . . . . . . . . . . 34
Setting the Power-On Mode feature . . . . . . . . . . . . . . . . . . . 35
Viewing the digital signal meter . . . . . . . . . . . . . . . . . . . . . . 35
Viewing the system status. . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only) . . . . . . . . . . . . . . . . . . . . . . 42
Using the auto aspect ratio feature . . . . . . . . . . . . . . . . . . . . 43
Selecting the cinema mode (480i and 1080i signals) . . . . . . 43
Adjusting the picture. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Selecting the picture mode . . . . . . . . . . . . . . . . . . . . . . . 44
Adjusting the picture quality . . . . . . . . . . . . . . . . . . . . . 44
Using the closed caption mode . . . . . . . . . . . . . . . . . . . . . . . 45
Base closed captions . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Digital CC Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
CC Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Adjusting the audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Muting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Using the digital audio selector . . . . . . . . . . . . . . . . . . . 46
Selecting stereo/SAP broadcasts . . . . . . . . . . . . . . . . . . 47
Adjusting the audio quality . . . . . . . . . . . . . . . . . . . . . . 47
Using the StableSound® feature. . . . . . . . . . . . . . . . . . . 48
Selecting the optical audio output format . . . . . . . . . . . 48
Using the Dolby® Digital Dynamic Range
Control feature. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Using the Locks menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Entering the PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . 49
If you cannot remember your PIN code . . . . . . . . . . . . . 49
Changing your PIN code . . . . . . . . . . . . . . . . . . . . . . . . 49
Blocking TV programs and movies by rating
(V-Chip) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Downloading an additional rating system for blocking
TV programs and movies . . . . . . . . . . . . . . . . . . . . 50
Blocking channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Unlocking programs temporarily . . . . . . . . . . . . . . . . . . 52
Using the input lock feature . . . . . . . . . . . . . . . . . . . . . . 52
Using the control panel lock feature . . . . . . . . . . . . . . . 53
Using the PC settings feature . . . . . . . . . . . . . . . . . . . . . . . . 53
Setting the PC Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Setting the sleep timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Displaying TV status information. . . . . . . . . . . . . . . . . . . . . 55
Understanding the auto power off feature . . . . . . . . . . . . . . 55
Understanding the last mode memory feature . . . . . . . . . . . 55

Chapter 7: Using the TV’s advanced features . . . . . . . . . . . . . 56
Using the advanced picture settings features . . . . . . . . . . . . 56
Using dynamic contrast . . . . . . . . . . . . . . . . . . . . . . . . . 56
Using the static gamma feature . . . . . . . . . . . . . . . . . . . 56
Selecting the color temperature . . . . . . . . . . . . . . . . . . . 57
Selecting the lamp mode . . . . . . . . . . . . . . . . . . . . . . . . 57
Using CableClear® digital noise reduction . . . . . . . . . . 58
Using MPEG noise reduction. . . . . . . . . . . . . . . . . . . . . 58
Using the Game Mode feature . . . . . . . . . . . . . . . . . . . . 59
Using the advanced audio settings features . . . . . . . . . . . . . 59
Using the SRS WOW™ surround sound feature . . . . . . 59

Chapter 8: Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 60
General troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
LED indications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Chapter 6: Using the TV’s features . . . . . . . . . . . . . . . . . . . .37
Selecting the video input source to view . . . . . . . . . . . . . . . 37
Labeling the video input sources . . . . . . . . . . . . . . . . . . . . . 37
Tuning channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Tuning channels using the Channel Browser™ . . . . . . . 38
Tuning to the next programmed channel . . . . . . . . . . . . 40
Tuning to a specific channel (programmed or
unprogrammed) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Switching between two channels using Channel
Return . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Switching between two channels using SurfLock™ . . . . 40
Selecting the picture size . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

(continued)

HM67 (E/F) Web 213:276

50HM67_EN.book Page 8 Wednesday, February 14, 2007 4:18 PM

Chapter 9: Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
Lamp unit replacement and care . . . . . . . . . . . . . . . . . . . . . . 63
Replacing the lamp unit
(User-replaceable component). . . . . . . . . . . . . . . . . 63
When to replace the lamp unit . . . . . . . . . . . . . . . . . . . . 63
How to replace the lamp unit . . . . . . . . . . . . . . . . . . . . . 64
Disposing of the used lamp unit. . . . . . . . . . . . . . . . . . . 65
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Limited United States Warranty
for DLP® Television Models . . . . . . . . . . . . . . . . . . . . . 67
Limited Canadian Warranty
for Toshiba Brand DLP® Television Models . . . . . . . . . 68

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

HM67 (E/F) Web 213:276

50HM67_EN.book Page 9 Wednesday, February 14, 2007 4:18 PM

Chapter 1: Introduction
NOTICE OF POSSIBLE TV STAND INSTABILITY
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH! Use this TV only with
the TOSHIBA TV stand listed in the
“Specifications” section of this manual. Use with other
stands may result in instability, causing possible injury or
death.

Welcome to Toshiba
Thank you for purchasing this Toshiba TV, one of the most
innovative DLP® projection TVs on the market. This digital
television is capable of receiving analog basic, digital basic
and digital premium cable television programming by direct
connection to a cable system providing such programming. A
security card provided by your cable operator is required to
view encrypted digital programming. Certain advanced and
interactive digital cable services such as video-on-demand, a
cable operator's enhanced program guide and data-enhanced
television services may require the use of a set-top box. For
more information call your local cable operator.

Features of your new TV
The following are just a few of the many exciting features of
your new Toshiba widescreen, integrated HD, DLP®
projection TV:
• Integrated digital tuning (8VSB ATSC and QAM)
eliminates the need for a separate digital converter set-top
box (in most cases).
• Three HDMI™ digital, high-definition multimedia
interfaces 1080p input support (- page 19).
• Two sets of ColorStream® HD high-resolution component
video inputs (- page 16).
• SRS WOW™ audio technologies (- page 59).
• Digital Audio Out optical audio connection with Dolby®
Digital optical output format (- page 48).
• CableClear® digital picture noise reduction
(- page 58).
• PC IN (Analog RGB) computer terminal (- page 21).
• IR OUT infrared terminal using the IR blaster cable for IR
pass-through device control (- page 13).
• Channel Labeling allows you to put the Call Letters (e.g.
ABC, HBO, etc.) on the screen along with the station
numbers, so you always know what you’re watching
(- page 33).
• 1080p output resolution (57HM167, 65HM167)
• 720p output resolution (50HM67)

HM67 (E/F) Web 213:276

50HM67_EN.book Page 10 Wednesday, February 14, 2007 4:18 PM

Chapter 1: Introduction

Overview of steps for installing,
setting up, and using your new TV

10 After you plug in the TV power cord, the yellow LED
(on the TV front) will blink 3 times. Wait several seconds
until the yellow LED stops blinking and then press p on
the TV or remote control.
See “LED indications” (- page 62).

Follow these steps to set up your TV and begin using its many
exciting features.

11 See “Menu layout and navigation” for a quick overview of

12 Program channels into the TV’s channel memory

Carefully read the important safety, installation, care, and
service information. Keep this manual for future
reference.
Observe the following when choosing a location for the
TV:
• Read “Important notes about your DLP® projection
TV” (- page 6).
• Place the TV on the applicable optional TV stand listed
in the “Specifications” section (if available for this TV
model) or on a sturdy, level, stable surface that can
safely support the size and weight of the unit.
• Place the TV in a location where light does not reflect
on the screen.
• Place the TV far enough from walls and other objects to
allow proper ventilation. Inadequate ventilation may
cause overheating, which will damage the TV. THIS
TYPE OF DAMAGE IS NOT COVERED UNDER
THE TOSHIBA WARRANTY.

Do not plug in any power cords until AFTER you have
connected all cables and devices to your TV.

BEFORE connecting cables or devices to the TV, learn
the functions of the TV’s connections and controls
(- pages 11–12).

Connect your other electronic device(s) to the TV
(- pages 13–21).

6
7

Install the batteries in the remote control (- page 22).

Program the remote control to operate your other
device(s) (- pages 24–28).

AFTER connecting all cables and devices, plug in the
power cords for your TV and other devices.

navigating the TV’s menu system (- page 29).
(- page 32).

13 For details on using the TV’s features, see Chapters 6
and 7.

14 For help, refer to the Troubleshooting Guide, Chapter 8.
15 For lamp unit replacement instructions, see Chapter 9.
16 For technical specifications and warranty information, see
Chapter 9.

17 Enjoy your new TV!

See “Learning about the remote control” (- page 23) for
an overview of the buttons on the remote control.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 11 Wednesday, February 14, 2007 4:18 PM

Chapter 1: Introduction

TV front and side panel controls and connections
Front of TV

Right side of TV

7
4

8
5
6
9
Control panel

Remote sensor (behind the screen) — Point the remote
control toward this area of the TV screen (- “Remote
control effective range” on page 22).
Blue, Yellow, and Green/Red
See “LED indications” on page 62 for additional
information.

POWER — Press to turn the TV on and off.
If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn off the
TV, press and hold the POWER button on the TV control
panel for 5 or more seconds to reset the TV.

CHANNEL Uu — When no menu is on-screen, these
buttons change the channel (programmed channels only;
- page 32).

VOLUME + – — These buttons adjust the volume level.

INPUT — Repeatedly press to change the source you are
viewing (ANT, VIDEO 1, VIDEO 2, ColorStream
HD1, ColorStream HD2, HDMI 1, HDMI 2, HDMI 3,
PC).

MENU (ENTER) — Press to access the menu system
(- pages 29–30). When a menu is on-screen, the MENU
button on the TV’s control panel functions as the ENTER
button.

ARROWS BbC c — When a menu is on-screen, these
buttons function as up/down/left/right menu navigation
buttons.

Side panel

EXIT — Press to instantly close an on-screen menu.

10 VIDEO-2 IN — The side panel A/V connections are
referred to as “VIDEO 2” and include standard A/V
inputs plus an optional S-video input.
Note: Standard (composite) video and S-video cables
carry only video information; separate audio cables are
required for a complete connection.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 12 Wednesday, February 14, 2007 4:18 PM

Chapter 1: Introduction

TV back panel connections
For an explanation of cable types and connections, see pages 13–21.

ColorStream® HD-1 and ColorStream® HD-2 —
Two sets of ColorStream® high-definition component
video inputs (with standard stereo audio inputs) for
connecting devices with component video output, such as
a Toshiba DVD player with ColorStream®.

VIDEO-1 IN — Standard (composite) video and standard
audio inputs for connecting devices with composite video
output.
PC IN — For use when connecting a personal computer.
PC audio input terminals are shared with HDMI-1 analog
audio input terminals, and their use can be configured in
the Audio Setup menu (- page 54).

HDMI™ IN — High-Definition Multimedia Interface
input receives digital audio and uncompressed digital
video from an HDMI device or uncompressed digital
video from a DVI device. Also see item 3. HDMI
connection is necessary to receive 1080p signals.

ANT — Antenna input that supports analog (NTSC) and
digital (ATSC) off-air antenna signals and analog and
digital Cable TV (QAM) signals.

Fixed Audio OUT — Analog audio outputs for
connecting an audio amplifier.

IR OUT — For controlling infrared remote-controlled
devices through the TV. You can connect up to two
devices with an IR blaster cable, and then control the
devices using the TV’s IR pass-through features.

Digital Audio OUT — Optical audio output in Dolby
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input.

Service port (behind the cover) — For service use
only. Used for updating the television’s firmware.

Note: Component video cables carry only video
information; separate audio cables are required for a
complete connection.

HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 13 Wednesday, February 14, 2007 4:18 PM

Chapter 2: Connecting your TV
Overview of cable types
Coaxial (F-type) cable

Coaxial (F-type) cable is used for connecting your antenna,
cable TV service, and/or cable converter box to the ANT input
on your TV.

HDMI™ cable

HDMI (High-Definition Multimedia Interface) cable is for use
with devices with an HDMI output. An HDMI cable delivers
digital audio and video in its native format. This cable carries
both video and audio information; therefore, separate audio
cables are not required for a complete HDMI device
connection (- page 19 and page 21).
Note: HDMI cable provides better picture performance than a
standard (composite) video or S-video cable.

Standard A/V cables (red/white/yellow)
Dual-wand IR blaster cable
Standard A/V cables (composite video) usually come in sets of
three, and are for use with video devices with analog audio and
composite video output. These cables (and the related inputs
on your TV) are typically color-coded according to use: yellow
for video, red for stereo right audio, and white for stereo left
(or mono) audio.

Dual-wand IR blaster cable is for use with video devices with
IR (infrared) remote control. This cable can be used with the
TV’s IR pass-through feature (- page 17).

To obtain IR blaster cable:
Visit www.ceaccessories.toshiba.com.

S-video cable
Optical audio cable
S-video cable is for use with video devices with S-video
output. Separate audio cables are required for a complete
connection.
Note: An S-video cable provides better picture performance
than a composite video cable. If you connect an S-video cable,
be sure to disconnect the standard (composite) video cable or
the picture performance will be unacceptable.

Optical audio cable is for connecting receivers with Dolby
Digital or PCM (pulse-code modulation) optical audio input to
the TV’s DIGITAL AUDIO OUT terminal (- page 20).

Analog RGB (15-pin) computer cable
Component video cables (red/green/blue)
Analog RGB (15-pin) computer cable is for connecting a PC to
the TV’s PC IN terminal (- page 21).
Component video cables come in sets of three and are for use
with video devices with component video output.
(ColorStream® is Toshiba’s brand of component video.) These
cables are typically color-coded red, green, and blue. Separate
audio cables are required for a complete connection.
Note: Component video cables provide better picture
performance than a standard (composite) video or S-video
cable.

About the connection illustrations
You can connect different types and brands of devices to your
TV in several different configurations. The connection
illustrations in this manual are representative of typical device
connections only. The input/output terminals on your devices
may differ from those illustrated herein. For details on
connecting and using your specific devices, refer to each
device’s owner’s manual.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 14 Wednesday, February 14, 2007 4:18 PM

Chapter 2: Connecting your TV

Connecting a VCR and antenna or Cable TV (no Cable box)
From Cable TV or antenna
TV back panel
Stereo VCR
VIDEO

AUDIO
R
IN

CH 3
CH 4
OUT

IN from ANT

OUT to TV

You will need:

To view the antenna or Cable signal:

• coaxial cables
• standard A/V cables
– For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) to VIDEO 2
on the side panel (instead of to VIDEO 1). Do not connect
both types of video cable to VIDEO 2 at the same time or
the picture performance will be unacceptable.
– If you have a mono VCR, connect L/MONO on the TV to
your VCR’s audio out terminal using the white audio cable
only.

Select the ANT video input source on the TV.*

To view the VCR:
Turn ON the VCR. Select the VIDEO 1 video input source on
the TV.*
* To select the video input source, press INPUT on the remote control
(- page 23). To program the TV remote control to operate other
devices, see Chapter 3.

The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 15 Wednesday, February 14, 2007 4:18 PM

Chapter 2: Connecting your TV

Connecting a VCR with S-video and a cable box
An S-video connection will provide better picture performance than a standard (composite) video cable.

From Cable TV
Cable box
IN CH 3
CH 4

TV right side panel

OUT

stereo VCR

TV back panel

VIDEO

AUDIO
R
IN

CH 3
CH 4
OUT

IN from ANT

OUT to TV

You will need:

To view basic and premium Cable channels:

• coaxial cables
• S-video cable
– Do not connect both types of video cable to VIDEO 2 at
the same time or the picture performance will be
unacceptable.

Turn OFF the VCR. Select the ANT video input source on the
TV.* Tune the TV to channel 3 or 4 (whichever channel the
Cable box output is set to). Use the Cable box controls to
change channels.

• standard audio cables
– If you have a mono VCR, connect L/MONO on the TV to
your VCR’s audio out terminal using the white audio cable
only.
Note: When you use a Cable box, you may not be able to use
the remote control to program or access certain features on the
TV.

To view the VCR:
Turn ON the VCR. Select the VIDEO 2 video input source on
the TV.*
* To select the video input source, press INPUT on the remote control
(- page 23). To program the TV remote control to operate other
devices, see Chapter 3.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 16 Wednesday, February 14, 2007 4:18 PM

Chapter 2: Connecting your TV

Connecting a DVD player with ColorStream® (component video), a VCR,
and a satellite receiver
Your TV has two sets of ColorStream® (component video) inputs.
TV back panel

From antenna

AUDIO
OUT
Y

COMPONENT VIDEO S-VIDEO VIDEO
OUT
OUT

Stereo VCR
VIDEO

AUDIO
R
IN

CH 3
CH 4
OUT

DVD player with component video

IN from ANT

OUT to TV

From satellite dish

AUDIO
OUT
Y

Satellite
IN

COMPONENT VIDEO S-VIDEO VIDEO
OUT
OUT

Satellite receiver with component video

You will need:
• coaxial cables
• standard A/V cables
– For better picture performance, if your VCR has S-video,
use an S-video cable (plus the audio cables) to VIDEO 2
on the side panel (instead of to VIDEO 1). Do not connect
both types of video cable to VIDEO 2 at the same time or
the picture performance will be unacceptable.
– If you have a mono VCR, connect L/MONO on the TV to
your VCR’s audio out terminal using the white audio cable
only.
• standard audio cables
• component video cables
– You can connect the component video cables (plus audio
cables) from the DVD player or satellite receiver to either
set of ColorStream terminals on the TV (HD-1 or HD-2).
The ColorStream HD-1 and HD-2 terminals can be used
with Progressive (480p, 720p) and Interlaced (480i, 1080i)
scan systems. A 1080i signal will provide the best picture
performance (1080p is not supported).
– If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to
VIDEO 2 on the side panel. If your DVD player has HDMI
video, see page 19.

To view satellite programs using the component video
connections:
Turn on the satellite receiver. Select the ColorStream HD-2
video input source on the TV.*

To view the VCR or view and record antenna
channels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO 1 video input source on the TV.*

To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record.
Select the ColorStream HD-1 video input source on the TV*
to view the DVD.
* To select the video input source, press INPUT on the remote control
(- page 23). To program the TV remote control to operate other
devices, see Chapter 3.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and
other countries, and may subject you to civil and criminal
liability.

To view antenna or Cable channels:
Select the ANT video input source on the TV.*

To view the DVD player:
Turn ON the DVD player. Select the ColorStream HD-1
video input source on the TV.*

HM67 (E/F) Web 213:276

50HM67_EN.book Page 17 Wednesday, February 14, 2007 4:18 PM

Chapter 2: Connecting your TV

Connecting a device to the IR OUT
infrared terminal using the IR
blaster cable for IR pass-through
device control
You can use the TV’s IR OUT terminal (infrared passthrough) to remotely operate (through the TV) many infrared
remote-controlled devices (such as Toshiba infrared remotecontrolled VCRs or DVD players) enclosed within an
entertainment center or similar cabinet. Without the IR OUT
connection, the device typically would need to be visible to
operate it remotely.

To connect the IR blaster cable:

Locate the infrared sensor on the front of your device.
This sensor is marked on some devices.*

Align one of the IR blaster cable’s wands about 1 inch
away from the infrared sensor on the front of the device
and attach it using double-sided mounting tape. If you
have a second device, attach the second wand in a similar
manner. (See illustration.)
Note: If you do not have a second device, coil the second
wand with a rubber band and leave it behind the TV.

Plug the IR blaster cable’s plug into the TV’s IR OUT
terminal.

To control the device(s):
You will need:
• dual-wand IR blaster cable (- page 13)
• other audio/video cables as required to connect the device(s)

to the TV (- pages 14–19)
Front of IR-controlled DVD player (for example)

Point either the device’s remote control or the TV remote
control (that you previously programmed to operate the
device; - Chapter 3) toward the front of the TV and press the
button for the desired function. The signal passes from the
remote control through the TV to the device via the IR blaster
cable.

Front of IR-controlled audio device (for example)

Infrared
sensor
IR blaster cable wand
(approx.1 inch from device)
TV back panel

Note:
• If you use the device’s remote control to operate the device,
you also will need to use the TV’s remote control to operate
the TV.
• The IR pass-through feature does not support all
IR-controlled devices; satisfactory performance may not be
attainable with certain devices.

*If you cannot locate the device’s infrared sensor:
1
2

3
4
5

Turn OFF the device.
Starting at the lower left corner of the device, place the
end of the device’s remote control (with the infrared
emitter) so it touches the front of the device and press
POWER. (Do not use the TV’s remote control for this
step.)
If the device turns on, the point at which the remote
control touched the device is the location of the sensor.
If the device does not turn on, move the remote control
slightly to the right and press POWER again.
Repeat step 4 until you locate the device’s infrared
sensor.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 18 Wednesday, February 14, 2007 4:18 PM

Chapter 2: Connecting your TV

Connecting a camcorder
You will need:
• standard A/V cables
– For better picture performance, if your camcorder has
S-video, connect an S-video cable (plus the audio
cables).

Camcorder

VIDEO

AUDIO
OUT
L
R

VIDEO 2 inputs on TV right side panel

To view the camcorder video:
Select the VIDEO 2 video input source on the TV.*
* To select the video input source, press INPUT on the remote control
(- page 23). To program the TV remote control to operate other
devices, see Chapter 3.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 19 Wednesday, February 14, 2007 4:18 PM

Chapter 2: Connecting your TV

Connecting an HDMI™ or DVI device
to the HDMI input
The HDMI input on your TV receives digital audio and
uncompressed digital video from an HDMI source device, or
uncompressed digital video from a DVI (Digital Visual
Interface) source device.
This input is designed to accept HDCP (High-Bandwidth
Digital-Content Protection) program material in digital form
from EIA/CEA-861-861B–compliant[1] consumer electronic
devices (such as a set-top box or DVD player with HDMI or
DVI output).
The HDMI input will accept and display 480i, 480p, 720p,
1080i, and 1080p signals.

To connect a DVI device, you will need:
• one HDMI-to-DVI adapter cable (HDMI type A connector)

per DVI device
– For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 9.8 ft (3m). The
recommended length is 6.6 ft (2m).
• one pair of standard analog audio cables per DVI device
– An HDMI-to-DVI adapter cable transfers video only.
Separate analog audio cables are required (see
illustration).
– See “Setting the HDMI™ audio mode” (- page 34).
TV back panel

Note: To connect a PC to the HDMI input, see page 21.

To connect an HDMI device, you will need:
• one HDMI cable (type A connector) per HDMI device
– For proper operation, it is recommended that you use an
HDMI cable with the HDMI Logo (HDMI™). You should use
an HDMI cable shorter than 16.4 ft (5m) for 1080p input
signals.
– HDMI cable transfers both video and audio. Separate
analog audio cables are not required (see illustration).
– See “Setting the HDMI™ audio mode” (- page 34).

DVI device
VIDEO
L

DVI/HDCP
OUT

AUDIO
R
IN IN

OUT

TV back panel

Note: To ensure that the HDMI or DVI device is reset properly,
it is recommended that you follow these procedures:
• When turning on your electronic components, turn on the
TV first, and then the HDMI or DVI device.
• When turning off your electronic components, turn off the
HDMI or DVI device first, and then the TV.

HDMI device
VIDEO

AUDIO
R

HDMI OUT

IN IN

OUT

[1] EIA/CEA-861-861B compliance covers the transmission of
uncompressed digital video with high-bandwidth digital content
protection, which is being standardized for reception of highdefinition video signals. Because this is an evolving technology, it
is possible that some devices may not operate properly with the TV.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.

To view the HDMI device video:
Select the HDMI 1, HDMI 2, or HDMI 3 video input source on
the TV.*
Note: If the audio output mode of the HDMI device is other
than the L-PCM mode, the TV speakers will not output sound.
* To select the video input source, press INPUT on the remote control
(- page 23). To program the TV remote control to operate other
devices, see Chapter 3.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 20 Wednesday, February 14, 2007 4:18 PM

Chapter 2: Connecting your TV

Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby®*
Digital g or 2-channel down-mixed PCM (pulse-code
modulation) signal for use with an external Dolby® Digital
decoder or other external audio system with optical audio
input.

You will need:
• optical audio cable (Use an optical audio cable that has the

larger “TosLink” connector and not the smaller “minioptical” connector.)
Dolby Digital decoder or
other digital audio system

* Manufactured under license from Dolby Laboratories.
Dolby, and the double-D symbol are registered trademarks of Dolby
Laboratories.

Connecting an audio system
This connection allows you to use external speakers with an
external analog audio amplifier to adjust the sound level.

Optical
Audio IN

LINE IN
L
R

Note:
• Some audio systems may not be compatible with Dolby
Digital bitstream signals. Older audio systems that are not
compatible with standard optical out signals may not work
properly, creating a high noise level that may damage
speakers or headphones. THIS DAMAGE IS NOT COVERED
BY YOUR WARRANTY.
• The DIGITAL AUDIO OUT terminal may not output some
digital audio sources because of copy restrictions.

TV back panel

You will need:
• standard audio cables

Analog audio amplifier
LINE IN
L
R

To control the audio:

1
2
3

Turn on the TV and the digital audio device.
Press Y on the TV’s remote control and open the Audio
menu.

TV back panel

Highlight Audio Setup and press T.

Audio
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio Setup

To control the audio:

In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device
(- “Selecting the optical audio output format” on
page 48).
Audio Setup
PC Audio

1
2

Turn on the TV and the stereo amplifier.
Minimize the sound volume from the TV’s built-in
speakers and control the volume level using the
amplifier’s remote control.

HDMI 1 Audio

Auto

MTS

Stereo

Language

English

Optical Output Format
Dolby Digital
Dynamic Range Control
Reset

Dolby Digital
Compressed
Done

HM67 (E/F) Web 213:276

50HM67_EN.book Page 21 Wednesday, February 14, 2007 4:18 PM

Chapter 2: Connecting your TV

Connecting a personal computer
(PC)
To connect a PC to the PC IN terminal on the TV:
When connecting a PC to the PC IN terminal on the TV, use an
analog RGB (15-pin) computer cable and a PC audio cable.
TV back panel

• Depending on the DVD’s title and the specifications of the
PC on which you are playing the DVD-Video, some scenes
may be skipped or you may not be able to pause during
multi-angle scenes.

To connect a PC to the HDMI terminal on the TV:
When connecting a PC to the HDMI terminal on the TV, use
an HDMI-to DVI adapter cable and analog audio cables.
If connecting a PC with an HDMI terminal, use an HDMI cable
(type A connector). Separate analog cables are not necessary
(- page 19).
TV back panel

PC audio
cable
Computer

PC audio
cable
PC audio
output

Computer

PC audio
output

Conversion adapter
(if necessary)
• To use a PC, set the monitor output resolution on the PC

before connecting it to the TV. The following signals can be
displayed:
Format

Resolution

V. Frequency

VGA

640 × 480

60Hz

SVGA

800 × 600

60Hz

XGA

1024 × 768

60Hz

Other formats or non-standard signals will not be displayed
correctly.
• To display the optimum picture, use the PC setting feature
(- “Using the PC settings feature” on page 53).

• The following signal formats can be displayed:

Format

Resolution

V. Frequency

VGA

640 × 480

59.94/60Hz

480i

720 × 480

59.94/60Hz

480p

720 × 480

59.94/60Hz

720p

1280 × 720

59.94/60Hz

1080i

1920 × 1080

59.94/60Hz

1080p

1920 × 1080

59.94/60Hz

Note: The edges of the images may be hidden.

Note:
• The PC audio input terminals on the TV are shared with the
HDMI-1 analog audio input terminals (- page 54).
• Some PC models cannot be connected to this TV.
• An adapter is not needed for computers with a DOS/V
compatible mini D-sub15-pin terminal.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 22 Wednesday, February 14, 2007 4:18 PM

Chapter 3: Using the remote control
Preparing the remote control
for use

• Always remove batteries from the remote control if they are
dead or if the remote control is not to be used for an
extended period of time. This will prevent battery acid from
leaking into the battery compartment.

Your TV remote control can operate your TV and many other
devices such as cable converter boxes, satellite receivers,
VCRs, DVD players, and HTIBs (home theater in a box), even
if they are different brands.

Remote control effective range

If you have a Toshiba device:

For optimum performance, aim the remote control directly at
the TV and make sure there is no obstruction between the
remote control and the TV.

Your TV remote control is preprogrammed to operate most
Toshiba devices (- page 26).

If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:

Point remote control
toward remote sensor
on front of TV.

You can program the TV remote control so it will operate the
other device (- pages 24–28).

Installing the remote control
batteries
1

16.4 ft (5m)

Remove the battery cover from the back of the remote
control.
Squeeze tab
and lift cover.

Install two “AAA” size batteries, making sure to match
the + and – signs on the batteries to the signs on the battery
compartment.

Reinsert the battery cover in the remote control until the
tab snaps.

Caution: Never throw batteries into a fire.
Note:
• Be sure to use AAA size batteries.
• Dispose of batteries in a designated disposal area.
• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.
• If the remote control does not operate correctly, or if the
operating range becomes reduced, replace batteries with
new ones.
• When necessary to replace batteries in the remote control,
always replace both batteries with new ones. Never mix
battery types or use new and used batteries in combination.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 23 Wednesday, February 14, 2007 4:18 PM

Chapter 3: Using the remote control

Learning about the remote control

The buttons used for operating the TV only are described here.
For a complete list of the remote control’s functions, see the
remote control functional key chart (- page 25).

POWER turns the TV on and off. Press p to turn on the
TV, The blue LED indicator on the TV front will be
illuminated. Press p again to turn off the TV.
Note: The Power-On Mode setting will affect the amount
of time it takes for the picture to appear when you turn on
the TV (- page 35).

PIC MODE selects the picture mode (- page 44).

SLEEP accesses the sleep timer (- page 54).

PIC SIZE cycles through the picture sizes: Natural,
TheaterWide 1/2/3, Full, and 4:3 HD (- page 41).

Channel Numbers (0–9, –/100) directly tune
channels. The = button is used to tune digital channels
(- page 40) or to edit the Favorites List (- page 38).

INPUT selects the video input source (- page 37).

CH Bb cycles through programmed channels when no
menu is on-screen (- page 32).

VOL + – adjusts the volume level.

FAV BROWSER accesses the Favorites List in the
Channel Brower™ (- page 38).

10 RECALL displays TV status information (- page 55).
11 CH RTN returns to the last viewed channel or source
(- page 40).
12 MUTE reduces or turns off the sound (- page 46).
13 INFO displays TV status information as well as program
details, when available (- page 55).
14 3 C / # c While watching TV, these buttons open the
Channel Browser™ and tune to the previous/next channel
in the channel history (- page 39). (Also see “Arrow
buttons.”)
15 Arrow buttons (BbC c) When a menu is on-screen,
these buttons select or adjust programming menus. (Also
see 3 C / # c.)
16 ENTER activates highlighted items in the main menu
system.
17 MENU accesses the main TV menu system (- pages 29
and 30).
18 EXIT closes on-screen menus.
19 MODE SELECT switch switches between TV,
CABLE/SAT, AUX 1, and AUX 2 modes (- page 24).
Set to “TV” to control the TV.

Note: The error message “Not Available” may appear if you
press a key for a function that is not available.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 24 Wednesday, February 14, 2007 4:18 PM

Chapter 3: Using the remote control

Using the remote control to control
your other devices
If you have a non-Toshiba device or a Toshiba device that the
remote control is not preprogrammed to operate, you must first
program the remote control to recognize the device (if you
have not already done so) (- pages 26–28).

POWER Turns the selected device on and off.

Channel Numbers (0-9) Press to directly access
channels (as opposed to < ,).

+10 Press to directly access DVD chapters higher than 10.

TOP MENU Accesses a DVD’s top menu.

CH Bb For channels programmed into the channel
memory (- page 40):
B selects the next higher channel.
b selects the next lower channel.

GUIDE Displays the channel guide in the CABLE/SAT
mode.
SET UP Accesses a DVD’s setup menu in the AUX
mode.

INFO Displays TV status information on-screen.

BbC c Press to navigate DVD menus (may not work on
some DVD players).

ENTER Required by some satellite receivers and DVD
players to activate certain functions.

To use your TV remote control to operate a:
• Cable converter box or satellite receiver, set the MODE

SELECT switch to CABLE/SAT.
• VCR, set the MODE SELECT switch to AUX 1.
• DVD player or HTIB, set the MODE SELECT switch to
AUX 2.
Note: Even after the TV remote control is programmed, it may
not operate certain features on any other devices. If this
happens and you wish to use those features, you will need to
use the device’s original remote control.

Point the remote control
directly at the device.

10 DVD CLEAR Press to reset the title and chapter number.
11 PLAY Begins playback of a tape or DVD.
12 PAUSE Press during play or record mode to pause the
picture; press again to restart.
13 STOP Stops the tape or DVD.
14 SKIP z Skips forward to locate later DVD chapters.
15 FF Fast-forwards the tape or DVD. (Press during play
mode to view the picture moving rapidly forward.)
16 SKIP Z Skips back to beginning of current DVD
chapter, or locates previous chapters.
17 REW Rewinds/reverses the tape or DVD. (Press during
play mode to view the picture moving rapidly backward.)
18 TV/VCR To view one program while recording another,
press to select TV mode.

16
17
18
19

SEARCH selects a specific DVD chapter, title or time.
19 REC Starts tape recording.
20 MODE SELECT switch Set to “TV” to control the TV;
“CABLE/SAT” to control a cable converter box or
satellite receiver; “AUX 1” to control a VCR; “AUX 2” to
control a DVD player or HTIB.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 25 Wednesday, February 14, 2007 4:18 PM

Chapter 3: Using the remote control

Remote Control functional key chart
Note:
• “---” = key does not send a signal in that remote control mode.
• “sTV” = key will affect the TV, even though the remote control is in another mode.
• * Not available for your TV.
REMOTE CONTROL KEY
POWER
SLEEP
PIC SIZE
PIC MODE
1-9
0
100/–/+10
INPUT
FAV BROWSER/
TOP MENU
MUTE
SET UP/GUIDE
VOL + –

INFO
ENTER

Toshiba TV
Power
Sleep timer
Picture size
PIC MODE
Digit 1-9
Digit 0
– (sub CH)
TV/Video select
FAV BROWSER
DVD TOP Menu*
Sound mute
Guide*
Volume up/down
Channel
up/down
RECALL
Previous channel
DVD previous menu*
Info
Enter

Menu up/down

---

Menu left/
Channel Browser™
Menu right/
Channel Browser™
Menu
Exit
DVD clear*
Pause*
Play*
Stop*
Skip REV*
Skip FWD*
Rewind*
Fast FWD*

CHBb
RECALL
CH RTN/DVD RTN

c#
MENU
EXIT/DVD CLEAR
PAUSE/STEP
PLAY
STOP
SKIP Z
SKIP z
REW
FF
TV/VCR/
SEARCH
REC
SLOW –
SLOW +
ANGLE
SUB TITLE
AUDIO
EJECT

CABLE
Power
s TV
s TV
s TV
Digit 1-9
Digit 0
--s TV

SAT (satellite)
Power
s TV
s TV
s TV
Digit 1-9
Digit 0
– (sub CH)
s TV

AUX 1 (VCR)
Power
s TV
s TV
s TV
Digit 1-9
Digit 0
100
s TV

AUX 2 (DVD or HTIB)
Power
s TV
s TV
s TV
Digit 1-9
Digit 0
+10
s TV

---

Top Menu

s TV
--s TV
Channel
up/down
s TV

s TV
SAT Guide
s TV
Channel
up/down
s TV

s TV
--s TV
Channel
up/down
s TV

s TV
Setup
s TV

---

DVD Return

-----

Info
Select, Enter
Menu
up/down

-----

Display
Enter

---

Menu up/down

---

Menu left

---

Menu left

---

Menu right

---

Menu right

---

Action Menu

---

DVD Menu

---

Exit

---

DVD Clear

---------------

Pause
Play
Stop
----Rewind
Fast FWD

Pause
Play
Stop
Skip REV
Skip FWD
Rewind
Fast FWD

DVD search*

---

TV/VCR

DVD search

REC MENU*
SLOW REW*
SLOW FWD*
Angle*
Sub title*
Audio*
Eject*

---------------

Record (2 click)
-------------

------DVD Angle
DVD Sub title
DVD Audio
DVD Eject

--s TV

HM67 (E/F) Web 213:276

50HM67_EN.book Page 26 Wednesday, February 14, 2007 4:18 PM

Chapter 3: Using the remote control

Programming the remote control
to control your other devices
Your Toshiba TV remote control is preprogrammed to operate
most Toshiba devices. To program your TV remote control to
operate a non-Toshiba device (or a Toshiba device that it is not
preprogrammed to operate), follow the steps below. For details
on using the remote control to operate the device, see page 24.

In the remote control code table (- page 27), find the
code for your device. If more than one code is listed, try
each one separately until you find one that works.

Set the MODE SELECT switch to the type of device
you are programming the remote control to operate —
CABLE/SAT (for a cable converter box or satellite
receiver), AUX 1 (for a VCR or TV/VCR combo), or
AUX 2 (for a DVD player or HTIB [home theater in a
box]).

While holding down E, press the Channel Number
buttons to enter the 3-digit code for your device.

To test the code, turn on the device, point the remote
control at it, and press p. See notes below.
• If the correct code was entered, the device will turn off.
• If the device does not respond, repeat steps 1–4 using
another code.
• If the device does not respond to another code, you will
need to use the remote control that came with the
device.

Remember to set the MODE SELECT switch back to
“TV” to control the TV.

For future reference, write down the code(s) you used:

DEVICE

CODE

DEVICE

CODE

Note:
• In addition to POWER, confirm that all necessary keys on the
TV remote control operate your device. If some keys are not
operational, repeat the device code setup using another
code (if other codes are listed for your device). If, after trying
all listed codes, the necessary keys do not operate your
device, use the device’s original remote control.
• Every time you change the batteries, you will need to
reprogram the remote control.
• Some newer VCRs respond to either of two codes. These
VCRs have a switch labeled “VCR1/VCR2.” If your VCR has
this kind of switch and does not respond to the codes for
your VCR brand, set the switch to the other position (“VCR1”
or “VCR2”) and reprogram the remote control.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 27 Wednesday, February 14, 2007 4:18 PM

Chapter 3: Using the remote control

Remote control codes
In some cases you may not be able to
operate your device with the TV
remote control. Your other device may
use a code that is not recognized by the
TV remote control. If this happens, use
the device’s remote control.

Cable converter box
ABC
Archer
Cableview
Century
Citizen
Contec
Diamond
GE
Gemini
Hamlin
Hitachi
Jasco
Motorola/GI/Jerrold
Magnavox
Memorex
Multi Canal
Novavision
Panasonic
Philco
Philips
Pioneer
Proscan
Radio Shack
RCA
Realistic
Recoton
Samsung
Scientific Atlanta
Sears
Signature
Signature 2000
Sprucer
Starcom
Stargate
Sylvania
TeleView
Texscan
Tocom
U. S. Electronics
United Cable
Universal
Wards

061, 062, 063, 082,
084, 087, 092,
096, 098
065, 092, 097, 099
064, 094
092
090, 092, 097
083, 085, 086, 088,
093, 098
093
061, 062
069, 070, 094
093
062, 095, 096
097
062, 069, 071, 082,
086, 089, 096, 107
072, 096
092, 104
090
101
081, 083, 085
087
066, 067, 068, 070,
072, 073, 074, 075,
092
076, 077
061, 062
092, 097, 099
064, 081
065
102
077, 090
063, 078, 079, 080,
088, 098, 101, 105
095
062
096
081, 085
069, 082, 087, 096,
103, 104
069, 090
095, 100
090
100
071, 084, 085
087, 096, 098
082
065, 092, 097, 099,
102, 103
096

Echostar
Express Vu
Fujitsu
GE
General Instruments
Hitachi
Hughes
Hughes Network
Systems
Intersat
Janeil
JVC
Kenwood
Magnavox
Optimus
Pansat
Primestar
Proscan
Radio Shack
RCA
Realistic
Samsung
Sony
Star Choice
Star Trak
STS
Toshiba
Uniden
Zenith

020, 040, 044, 046,
050, 053
018, 041, 051
057
027
008, 009, 013
010, 011, 012, 022,
023, 031, 049
033
033
019
048
027
017, 057
029
060
058
036, 052
015, 042
008, 009, 013
022, 023, 030
008, 009, 013, 016
030
059
014, 055
057, 106
025, 026, 037, 054
024
000, 001, 002, 003,
004, 005, 006, 007,
020, 031, 056
021, 028, 030, 032,
035, 039, 043, 045,
047, 058
027

TV/VCR Combo
Action
GE
Goldstar
Panasonic
Precision
Quasar
Realistic
Sony
Toshiba
Zenith
Totevision

078
059, 062
065
065
078
065
079
074
057
065
009, 010, 065

DVD/VCR Combo
Go Video
JVC
RCA
Samsung
Sanyo
Zenith

DVD=087,
VCR=081
DVD=088,
VCR=082
DVD=089,
VCR=083
DVD=090,
VCR=084
DVD=091,
VCR=085
DVD=092,
VCR=086

DVD player

Satellite receiver
Alphastar
Chaparral
DISH Network

Drake

038, 059
034
057

Aiwa
Apex
BOSE
Broksonic

006, 015
016, 017
097
018

Clarion
Classic
Daewoo
Denon
Emerson
Fisher
Funai
GE
Go Video
GPX
Hitachi
JVC
Kenwood
Konka
Magnavox
Memorex
Mintek
NAD
Nakamichi
Norcent
Onkyo
Oritron
Panasonic
Philips
Pioneer
Proscan
Qwestar
RCA
Sampo
Samsung
Sansui
Sanyo
Sharp
Sherwood
Sony
Sylvania
Teac
Technics
Techwood
Toshiba
Yamaha
Zenith

019
020
021
022, 023, 024, 025
026, 027
028
027
001, 029, 030
087
031
005, 032, 033, 034,
035
003, 007, 036, 042,
088
037
008, 009
004, 038
039
040
026
041
043
044
058
010, 045, 046, 047,
048, 049, 050
004, 051
052, 053, 054, 055
001, 056
057, 058
001, 002, 059, 089
060
061, 062, 086, 090
073
063, 091
064, 067
074
011, 012, 065, 066,
068, 069, 070
027
071
072
075
000, 013, 076, 077,
078
079, 080, 081
014, 082, 092

Portable DVD player
Aiwa
Audiovox
Panasonic
RCA

093
094, 095
024, 096, 099
098

VCR
Admiral
Aiko
Aiwa
Akai
Audiovox
Bell & Howell
Broksonic
Calix
Carver
CCE
Citizen
Colortyme

049
019
018
003, 004, 037, 038,
039, 058, 069
010
007, 068
008, 017
010
026
019
009, 010, 011, 012,
013, 014, 015, 019,
057, 073
005

HM67 (E/F) Web 213:276

50HM67_EN.book Page 28 Wednesday, February 14, 2007 4:18 PM

Chapter 3: Using the remote control

Craig
Curtis Mathes
Daewoo
Daytron
Denon
Dimensia
Electrohome
Emerson

Fisher
Fuji
Funai
Garrard
GE
Go Video
Goldstar
Gradiente
Harman Kardon
Hitachi
JBL
JC Penney

Jensen
JVC
Kenwood
Kodak
LG
Lloyds
Logik
LXI
Magnasonic
Magnavox
Marantz
Memorex

MGA
MGN
Minolta
Mitsubishi
Montgomery Ward
Motorola
MTC
Multitech
NEC
Nikko
Noblex
Optimus
Optonica

009, 010, 016, 061,
065, 079
001, 005, 009, 012,
014, 040, 048, 053,
056, 057
011, 013, 015, 017,
018, 019, 057, 078
078
063
001, 048
010, 020, 065
003, 008, 010, 011,
017, 018, 020, 028,
039, 054, 057, 062,
065, 068, 072
007, 016, 021, 022,
023, 057, 064, 068,
070, 071, 079
004, 041
018, 073
018
001, 002, 009, 040,
042, 048, 056
056, 059, 061, 081
005, 010, 014, 054,
056, 065, 067
018, 065
005
024, 025, 035, 037,
042, 063, 070, 080
076
005, 006, 007, 008,
009, 010, 023, 024,
025, 026, 035, 056,
061, 063, 065
024, 025, 037, 050
005, 006, 007, 014,
037, 043, 055, 062,
063, 068, 082
005, 006, 007, 012,
014, 037, 043, 050,
053, 068, 071
010
010
053, 073, 079
061
010
061, 065, 078
026, 027, 034, 044,
057, 061, 072
005, 006, 007, 012,
014, 026, 053, 067
007, 009, 010, 016,
018, 034, 049, 063,
065, 066, 068, 075,
079
020, 028, 039
056
024, 025, 035, 063
020, 024, 025, 028,
039, 043, 065
049
049
009, 046, 061
009, 012, 018
005, 006, 007, 012,
014, 037, 043, 053,
054, 067, 070
010
009
010, 049, 065
031

Orion
Panasonic
Pentax
Pentex Research
Philco
Philips
Pioneer
Portland
Proscan
Proton
Quasar
Radio Shack
Radio Shack/Realistic
Radix
RCA

Realistic

Ricoh
Runco
Samsung
Sansui
Sanyo
Scott
Sears

Sharp
Shintom
Signature
Signature 2000
Singer
Sony
STS
Sylvania
Symphonic
Tandy
Tashiko
Tatung
Teac
Technics
Teknika
Toshiba
Totevision
Unitec
Unitech
Vector Research

054, 057, 062, 065,
068, 072
036, 045, 046, 057,
061, 072, 079
012, 024, 025, 035,
042, 053, 063
014
026, 027, 063
026, 031, 044, 057
006, 024, 043, 055
012, 013, 015
001, 002, 048
061
045
010, 031, 065
007, 009, 010, 016,
018, 020, 021, 022,
031, 049
010
001, 002, 003, 009,
024, 025, 029, 035,
040, 042, 045, 048,
055, 056, 063, 071,
083
007, 009, 010, 011,
016, 018, 020, 021,
022, 031, 049, 051,
056, 060, 065, 075,
079
047
034
009, 011, 038, 056,
073, 084
006, 037, 043, 061
007, 009, 016, 054,
064, 068, 071, 075,
079, 085
008, 011, 017, 028,
030, 057, 065, 072
007, 010, 016, 021,
022, 023, 024, 025,
035, 053, 057, 063,
064, 065, 068, 071,
075, 079
013, 020, 031, 049,
051, 060, 066
004, 025, 032, 061
049
075
047, 061
004, 032, 033, 041,
052, 058, 070, 074,
076, 077, 080
035
018, 026, 027, 028,
044, 072
018, 050, 051, 053,
073, 079
007
010
037
018, 029, 037
036
010, 018, 065
000, 011, 021, 023,
024, 028, 030, 039,
057, 074, 078, 079
009, 010, 065
073
009
005, 006, 011, 012,
053

Video Concepts
Wards

White Westinghouse
XR-1000
Yamaha
Zenith

005, 006, 011, 012,
039, 053
009, 010, 011, 016,
018, 020, 024, 025,
031, 035, 049, 051,
056, 057, 060, 065,
066, 079
073
018
005, 006, 007, 014,
037, 053
004, 032, 034, 041,
047, 069, 086

HTIB
Lasonic
Panasonic
Venturer

083
084
085

HM67 (E/F) Web 213:276

50HM67_EN.book Page 29 Wednesday, February 14, 2007 4:18 PM

Chapter 4: Menu layout and navigation
Main menu layout
The tables below and on the next page provide a quick overview of your TV’s menu system.
To open the main menus (illustrated below), press Y on the remote control or TV control panel.
Icon
Video

Audio

Preferences

Locks

Setup

Item
Mode
Picture Settings
Noise Reduction
Game Mode
Theater Settings
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio Setup
CC (Closed Caption) Selector
Base CC Mode
Digital CC Settings
Input Labeling
Channel Labeling
Menu Language
Channel Browser Setup
Enable Rating Blocking
Edit Rating Limits
Channels Block
Input Lock
Front Panel Lock
New PIN Code
Installation
Sleep Timer
PC Settings
Power-On Mode

Option
S Sports/Standard/Movie/Preference
S [Opens the Picture Settings menu]
S [Opens the Noise Reduction menu]
S On/Off
S [Opens the Theater Settings menu]
S [Launches the temporary Audio Selector]
S [Opens the Audio Settings menu]
S [Opens the Advanced Audio Settings menu]
S [Opens the Audio Setup menu]
S [Launches the temporary CC Selector]
S OFF/CC1/CC2/CC3/CC4/T1/T2/T3/T4
S [Opens the Digital CC Setup menu]
S [Opens the Input Labeling menu]
S [Opens the Channel Labeling menu]
S English/French/Spanish
S [Opens the Channel Browser Setup menu]
S Off/On
S [Opens the Edit Rating Limits menu]
S [Opens the Channels block menu]
S Off/Video/Video+
S Off/On
S [Opens the New PIN Code entry screen]
S [Opens the Installation menu]
S [Opens the Sleep Timer menu]
S [Opens the PC Settings menu]
S Power-Saving/Fast

Page
44
44
58
59
41
46
47
59
47
46
45
45
37
33
31
38
50
50
51
52
53
49
31
54
53
35

HM67 (E/F) Web 213:276

50HM67_EN.book Page 30 Wednesday, February 14, 2007 4:18 PM

Chapter 4: Menu layout and navigation

Setup/Installation menu layout
The Installation menu contains the Terrestrial and System Status menus.
To open the Installation menu (illustrated below), press Y on the remote control or TV control panel, open the Setup menu,
select Installation, and press T.
Icon
Press Y,
Terrestrial
open the
Setup menu,
and then
open the
Installation System Status
sub-menu.

Item
Input Configuration
Channel Program
Channel Add/Delete
Signal Meter

Option
S [Opens the Input Configuration menu]
S [Start] S [Scans for new channels on ANT]
S [Opens the Channel Add/Delete menu]
S [Opens the Signal Meter menu]

Page
31
32
32
35

System Information

S [Opens the System Information screen]

Navigating the menu system
You can use the buttons on the remote control or TV control
panel to access and navigate your TV’s on-screen menu
system.
• Press Y to open the menu system.
• When a menu is open, use the up/down/left/right arrow
buttons (BbC c) on the remote control or TV control panel
to move in the corresponding direction in the menu.
• Press T to save your menu settings or select a highlighted
item. (A highlighted menu item appears in a different color
in the menu.)
• All menus close automatically if you do not make a selection
within 60 seconds, except the signal meter menu, which
closes automatically after about 5 minutes.
• To close a menu instantly, press O.

Note:
• The menu background may sometimes appear black,
depending on the signal the TV is receiving. This is not a
sign of malfunction.

Video
Mode

Sports

Picture Settings
Noise Reduction
Off

Game Mode
Theater Settings

Navigate

CH RTN Back

ENTER Select

EXIT Exit

• The Video sub-menu appears with a black background,
which looks different from other menus.
Mode: Sports

Picture Settings
Contrast

100

Brightness

Color

Tint

Sharpness

Advanced Picture Settings
Reset

Done

HM67 (E/F) Web 213:276

50HM67_EN.book Page 31 Wednesday, February 14, 2007 4:18 PM

Chapter 5: Setting up your TV
Selecting the menu language
You can choose from three different languages (English,
French and Spanish) for the on-screen display of menus and
messages.

To select the menu language:

1
2
3

Press Y and open the Preferences menu.

Configuring the antenna input
source for the ANT terminal
To configure the ANT input source:

1
2

Press Y and open the Setup menu.
Highlight Installation and press T.

Highlight Menu Language and press c.
Press B or b to select your preferred menu language and
press T.

Setup
Installation
Sleep Timer
PC Settings
Power-On Mode

Preferences

CC Selector
Base CC Mode

Off

Digital CC Settings
Input Labeling

Fast

(A new set of Installation menu icons will appear, as
shown below.) Open the Terrestrial menu, highlight
Input Configuration, and press T.

Channel Labeling
Menu Language
Channel Browser Setup

English

Installation

Français

Terrestrial

Español

Input Configuration

Press O to close the Preferences menu.

Channel Program
Channel Add/Delete
Signal Meter

Press C or c to select the input source (Cable or
Antenna) for the ANT input on the TV.
Input Configuration
Antenna In

Cable
Cancel

Done

To save your new settings, highlight Done and press T.
To revert to your original settings, highlight Cancel and
press T.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 32 Wednesday, February 14, 2007 4:18 PM

Chapter 5: Setting up your TV

Programming channels into the
TV’s channel memory

When you press < or , on the remote control or TV control
panel, your TV will stop only on the channels you programmed
into the TV’s channel memory.
Follow the steps below to program channels into the TV’s
channel memory.

(A new set of Installation menu icons will appear, as
shown below.) Open the Terrestrial menu, highlight
Channel Program to bring up the Start, and press T
again to begin channel programming.
Installation
Terrestrial
Input Configuration
Start

Channel Program
Channel Add/Delete
Signal Meter

Programming channels automatically
ANT
Cable
Scanning channels, please wait ...

Your TV can automatically detect all active channels in your
area and store them in its memory. After the channels are
programmed automatically, you can manually add or erase
individual channels in the channel memory.
Note:
• You must configure the antenna input source before
programming channels (- page 31).
• If the Antenna input signal type is set to Cable, the automatic
channel programming process erases channels that were
previously programmed into the TV’s memory.
• If the Antenna input signal type is set to Antenna, the
automatic channel programming process adds newly found
channels to the existing set of programmed channels (and
does NOT erase channels that were previously
programmed into the TV’s memory.) To remove an Antenna
source channel from the memory, you must manually delete
it.
• To tune the TV to a channel not programmed in the channel
memory, you must use the Channel Number buttons on the
remote control.
• Programming channels when the antenna input is
configured for Cable will take substantially longer than when
the antenna input is configured for Antenna. This is normal;
however, once channel programming is finished, you should
not have to repeat the programming process again unless
your Cable TV service lineup changes significantly.

To program channels automatically:

Configure the antenna input source, if you have not
already done so (- page 31).

2
3

Press Y and open the Setup menu.
Highlight Installation and press T.

52%

Number of Channels Found - 73
Scanning Digital Channels
Found Channel - 118
Abort

The TV will automatically cycle through all the antenna
channels, and store all active channels in the channel
memory. While the TV is cycling through the channels,
the message “Scanning channels, please wait” appears (as
shown above).

To cancel channel programming, press O on the remote
control (or highlight Abort in the on-screen display and
press T).
When channel programming is finished, press < or , to
view the programmed channels.

Manually adding and deleting channels
in the channel memory
After automatically programming channels into the channel
memory, you can manually add or delete individual channels.

To add or delete channels in the channel memory:

1
2
3

Press Y and open the Setup menu.
Highlight Installation and press T.
(A new set of Installation menu icons will appear, as
shown below.) Open the Terrestrial menu, highlight
Channel Add/Delete, and then press T.
Installation
Terrestrial
Input Configuration
Channel Program

Setup

Channel Add/Delete

Installation

Signal Meter

Sleep Timer
PC Settings
Power-On Mode

Fast

HM67 (E/F) Web 213:276

50HM67_EN.book Page 33 Wednesday, February 14, 2007 4:18 PM

Chapter 5: Setting up your TV

To add a channel to the channel memory:
Highlight the unchecked box next to the channel number you
want to add, and then press T to check the box.

To manually add digital subchannels on a physical
channel:
Use the Channel Numbers and the Dash (=) on the remote
control to enter the channel number (for example, 56–1).
If the channel is found, the number will be added to the list and
the box will be checked.
If the channel is not found, a message will appear.

To remove a channel from the channel memory:
Highlight the checked box next to the channel number you
want to remove, and then press T to uncheck the box.

Labeling channels
A list of common channel labels (logos) for various channels
(ABC, CBS, etc.) will be programmed into the TV. You will
be able to view and assign these logos from the Channel
Labeling window. If the desired channel label is not provided
in the list, you will be able to manually enter/edit labels using
the software keyboard.

To assign channel labels:

1
2

Press Y and open the Preferences menu.
Highlight Channel Labeling and press T.
The Channel Labeling window opens.

To save your new settings:
Highlight Done and press T.

Preferences
CC Selector

Off

To revert to your original settings:

Base CC Mode
Digital CC Settings

CC2

Highlight Cancel and press T before saving.

Input Labeling

CC3

Off

CC1

Channel Labeling

To remove all channels from the channel memory:

CC4

English

Menu Language

Channel Browser Setup

Highlight Reset and press T, and then highlight Done and
press T.

Channel Labeling
{No Label}

Channel Add/Delete

A&E

ANT

24
A&E

Analog

ABC

2-1

Digital

ABCFAM

2-2

Digital

ABCHD

Analog

AMAX

Analog

AMAXW

Custom

Digital

AMC

Clear All

Analog

ANIMAL

Done

Analog

Reset

7-1

Digital

Cancel

Analog

Done

To remove encrypted channels from the channel
memory:
If an encrypted channel is accidentally added to the channel list
by programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel
surfing. When you tune to an encrypted channel, the following
message will appear.

Press CH UP/DOWN to
change channels.

3
4

Press < or , to select the channel you want to label.

5
6

Repeat steps 3 and 4 for other channels.

Press BbC c to highlight the desired channel label and
press T.
To save your settings, highlight Done and press T.
Channel Labeling
{No Label}
A&E
ABC
ABCFAM

ANT

24
A&E
Press CH UP/DOWN to
change channels.

ABCHD

Digital Channel Is Encrypted - Press 1 on remote to remove channel

AMAX

Press “1” button while the message is on the screen to
remove the unnecessary channel from the channel list.

AMAXW

Custom

AMC

Clear All

ANIMAL

Done

The maximum number of labels that can be stored is 128.

To remove channel labels:

1
2

Open the Channel Labeling window.
Press < or , to select the channel for which you want to
remove the label.

(continued)

HM67 (E/F) Web 213:276

50HM67_EN.book Page 34 Wednesday, February 14, 2007 4:18 PM

Chapter 5: Setting up your TV

Press BbC c to highlight No Label and press T.

Channel Labeling
{No Label}

Channel Labeling

ANT

A&E

Highlight Yes from the deletion confirmation window
and press T.
TIMES

ABC

TLC

Press CH UP/DOWN to
change channels.

ABCFAM

TMC

ABCHD

TMCX

AMAX

4
5

AMAXW

Custom

AMC

Clear All

ANIMAL

Done

TMCw

Repeat steps 2 and 3 for other channels.
To save your settings, highlight Done and press T.

To create and assign a custom label:

TNT

Custom

TNTHD

Clear All

TOCDEFG

Done

Setting the HDMI™ audio mode
To set the HDMI audio mode:

Press < or , to select a channel you want to label.

1
2
3

Press Bb c to highlight Custom and press T.
The software keyboard will appear.
{No Label}

ANT

A&E

ABC1 1

A&E

A BCHCRTN
a Cancel
b c 2
2Edit

Press CH UP/DOWN to
4
4 G H I g h ichange
5
ABCFAM
channels. J K L j k l 5

7 PQR S p q r s 7
ABCHD
_
100 Backspace

8 T U V t u v 8
0 0

AMAX

Send
Exit
E F d
e f 3
3 D EXIT

6 MNOmn o 6
9 WX Y Zw x y z 9

Yes

Highlight Done and press T to save changes, and go
back to the Channel Labeling window.

Open the Channel Labeling window.

Channel Labeling

Press Y and open the Audio menu.
Highlight Audio Setup and press T.
Press B or b to select HDMI 1 Audio and then press
C or c to select the HDMI 1 audio mode (Auto, Digital,
or Analog). (Auto is the recommended mode.) See
“Connecting an HDMI or DVI device to the HDMI input”
(- page 19).

INPUT Space

Audio Setup

AMAXW

Delete the selected custom label?

Press CH UP/DOWN to
change channels.

TMCXw

If the desired channel label is not available from the list of
presets, you can create a custom label.

1
2
3

ANT

AMC

Clear All

ANIMAL

Done

PC Audio

HDMI 1 Audio

Auto

MTS

Stereo

Language

English

Repeatedly press the corresponding key on the remote
control to highlight the desired character on the on-screen
software keyboard.

Optical Output Format

Dolby Digital
Compressed

Dolby Digital
Dynamic Range Control

The highlighted character is entered after you either press
a different key, press c key, or after a two-second pause.

Reset

Repeat steps 4 and 5 until you have entered all desired
text.

7
8

When finished, press T.
(New labels will be added to the list in alphabetical order
and marked with an icon to indicate that they are
custom.) Highlight the new custom label and press T to
assign. Assigned channel labels will be displayed in the
banner, Channel Add/Delete window, and Channels
Block window.

Done

Note: Because the PC and HDMI-1 inputs share the same set
of analog audio inputs, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to “No,” the
HDMI 1 Audio setting changes to “Auto.” If PC Audio is set to
“Yes,” the HDMI 1 Audio setting is set to “Digital” and is
grayed out in the menu. (Also see item 3 on page 12 and
“Setting the PC Audio” on page 54.)

To delete the custom label:

1
2

Open the Channel Labeling window.
Highlight the label to be deleted and press =.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 35 Wednesday, February 14, 2007 4:18 PM

Chapter 5: Setting up your TV

Setting the Power-On Mode feature

Viewing the digital signal meter

You can select either Power-Saving or Fast mode.
If you select Power-Saving mode and you turn off the TV, it
can take several seconds for the picture to appear when you turn
on the TV again. Power-Saving mode saves more power than
Fast mode. See “Specifications” on page 66 for details.
If you select Fast mode and the TV is turned off, the TV will
stay in Standby mode for several minutes (see Note below). If
the TV is turned on from Standby mode, the full picture
appears immediately.

You can view the digital signal meter in the ANT digital TV
input source only.

To view the digital signal meter:

1
2
3

To set the Power-On Mode feature:

1
2
3

Press Y and open the Setup menu.
Highlight Installation and press T.
A new set of Installation menu icons will appear, as shown
below. Open the Terrestrial menu, highlight Signal
Meter, and press T.
Installation

Press Y and open the Setup menu.

Terrestrial

Highlight Power-On Mode and press c.

Input Configuration
Channel Program

Press b or B to select either Fast or Power-Saving and
press T.

Setup
Installation
Sleep Timer
PC Settings
Power-On Mode

Channel Add/Delete
Signal Meter

Fast

Power-Saving
Fast

Note: If Power-On Mode is set to Fast and you turn off the TV,
the following will occur for a few minutes:
• The screen (lamp) lights dimly; and
• The fans continue to run.
This is a function of the Power-On Fast Shutdown mode and is
not a TV malfunction. If you do not prefer this, set the PowerOn Mode feature to Power-Saving.
When the Power-On Mode feature is set to Power-Saving, if
you repeatedly turn the TV on and off in a short period of time,
the useful service life of the lamp may be shorter than the
average useful service life (- page 63).

IMPORTANT NOTICE ABOUT HOT LAMP RESTART
When the TV has been powered on long enough for the
lamp unit to get hot, it may take several minutes for the
picture to appear in the following situations:
• When the Power-On Mode feature is set to PowerSaving and you turn the TV off and then on again within
a few minutes; or
• If the TV is on when a short-term power failure, power
surge, or other similar power failure occurs, such that
the TV loses and regains power within a few minutes.
This is a property of DLP® TV lamp technology and is
NOT a sign of malfunction.
If this occurs, the yellow LED on the TV front panel will
blink (and the blue LED will be lit solid) until the TV is
finished restarting the lamp and the normal picture
appears. If both LEDs are blinking, you will need to turn
the TV off and then on again to restart the lamp.

Press BbC c to select the antenna input and digital
channel whose signal you want to check.
Note: The physical digital channel number listed in the
Signal Meter screen may not correspond to a virtual TV
channel number. Contact your local broadcasters to
obtain the RF channel numbers for your local digital
stations.
Signal Meter
Signal Locked

Peak

Physical Digital Channel
Virtual Digital Channel
Advanced

4
4-1
Done

To close the screen and return to the Terrestrial
menu:
Highlight Done and press T.

To return to normal viewing:
Press O.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 36 Wednesday, February 14, 2007 4:18 PM

Chapter 5: Setting up your TV

Viewing the system status
To view the system status:

Highlight Yes and press T. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the reset process.
System Information

1
2
3

Press Y and open the Setup menu.
Highlight Installation and press T.
A new set of Installation menu icons will appear, as shown
below. Open the System Status menu, highlight
System Information, and press T.

Press YES to confirm. After the TV
turns off, unplug it and plug it back
in to complete the reset.

Yes

To cancel the reset:
Highlight No and press T.

Installation
System Status
System Information

Press C c to scroll through the menu bar to select the
Software Version and view the related information.
System Information
Software Version
HM07
3.2.21.0
Nov 17 2006 - 01:52:20
FW: 0B

Done

To close the screen and return to the Installation
menu:
Highlight Done and press T.

To return to normal viewing:
Press O.

Reset Factory Defaults
To reset all settings and channels to their factory
default values:

1
2

Press Y and open the Setup menu.
Highlight Installation and press T. A new set of
Installation menu icons will appear.

Open the System Status menu, highlight System
Information, and press T.

Press C c to scroll through the menu bar to select
Factory Defaults.
System Information
Factory Defaults
This window provides the ability to reset the TV
settings.Type in your PIN now (or "0000" if no
PIN has been set) to restore settings to their
factory default values.

Done

Enter your PIN code (or 0000 if no PIN code has been set).

HM67 (E/F) Web 213:276

50HM67_EN.book Page 37 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features
Selecting the video input source
to view
To select the video input source to view:

1
2

Press + on the remote control or TV control panel.
And then either:
a) Press 0–8; or
b) Repeatedly press Bb on the remote control and then
press T to change the input; or
c) Repeatedly press + on the remote control or TV
control panel to change the input.
The current signal source displays in the top right corner
of the Input Selection screen.
Input Selection
0
1
2
3
4
5
6
7
8

ANT

ANT
Video 1
Video 2
ColorStream HD1
ColorStream HD2
HDMI 1
HDMI 2
HDMI 3
PC

0 - 8 / INPUT to Select

Labeling the video input sources
You can label each video input source according to the type of
device you connected to each source, from the following preset
list of labels:
• – – (default label)
• Audio Receiver
• Cable
• Compact Disc
• DTV
• DVD
• Game Console
• HD DVD
• Laser Disk
• Satellite/DSS
• VCR
• Video Recorder
• Hide (to hide an unused input in the Input Selection screen)
Note: If you select PC in the Input Selection screen, you can
choose only “– –” or “Hide” as the label.

To label the video input sources:
Navigate

Note:
• You can label the video input sources according to the
specific devices you have connected to the TV
(- “Labeling the video input sources” at right).
• Sources can also be “hidden” (- “Labeling the video input
sources” at right).
• “No Video Signal” will appear randomly on the screen if no
signal is received in video input mode.

1
2
3

Press Y and open the Preferences menu.
Highlight Input Labeling and press T.
Press B or b to highlight the video source you want to
label.

Preferences
CC Selector

Off

Base CC Mode

Off

CC1

Digital CC Settings

CC2

Input Labeling

CC3

Channel Labeling
Menu Language
Channel Browser Setup

CC4

English

T1
T2

Input Labeling
Video 1

VCR

Video 2

Cable

ColorStream HD 1

Video Recorder

ColorStream HD 2

Hide

HDMI 1

DTV

HDMI 2

Satellite/DSS

HDMI 3

DVD

-Reset

Done

(continued)

HM67 (E/F) Web 213:276

50HM67_EN.book Page 38 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Press C or c to select the desired label for that input
source. If a particular input is not used, you can select
Hide as the label, which will cause that input to be
“grayed out” in the Input Selection screen and skipped
over when you press + on the remote control.

To save the new input labels, highlight Done and
press T.
To revert to the factory default labels, highlight Reset
and press T.

Input labeling example:
The screen below left shows the default Input Selection
screen (with none of the inputs labeled as a specific device).
The screen below right is an example of how you could label
the inputs if you connected a VCR to VIDEO 1, Cable TV to
VIDEO 2, a video recorder to ColorStream HD1, a DTV settop box to HDMI 1, a satellite/DSS set-top box to HDMI 2, and
a DVD player to HDMI 3. Also note that the ColorStream HD2
input is labeled “Hidden,” which means that input will be
skipped over when + is pressed.
Input Selection
0
1
2
3
4
5
6
7
8

ANT

Input Selection
0
1
2
3
4
5
6
7
8

ANT
Video 1
Video 2
ColorStream HD1
ColorStream HD2
HDMI 1
HDMI 2
HDMI 3
PC

0 - 8 / INPUT to Select

Input Selection screen with
no inputs labeled.

1
2
3

Press Y and open the Preferences menu.
Highlight Input Labeling and press T.
Highlight Reset and press T.

The Channel Browser™ provides an easy navigation interface
for all your channels and inputs. This feature allows you to:
• Navigate the contents of all of your inputs.
• Keep a list of your favorite channels (see “Favorites
Browser,” below).
• Keep a history of the last 32 channels or inputs viewed.
• Quickly surf and tune your recently viewed channels/inputs
from the Channel Browser™ History List (illustrated on the
next page).
• Surf via Browse mode (to immediately tune channels as you
highlight them in the Channel Browser™) or Select mode (to
surf over channels in the Channel Browser™ before you
select one to tune).
• Quickly change inputs from the Inputs List.

The Favorites Browser allows you to quickly set up a favorite
channels/inputs list that is integrated into the Channel Browser™.

To add a favorite channel/input:
Navigate

Input Selection screen with
all inputs labeled except input 4,
which has been hidden.

To clear the input labels:

Tuning channels using the
Channel Browser™

Favorites Browser

0 - 8 / INPUT to Select

Navigate

ANT

ANT
VCR
Cable
Video Recorder
ColorStream HD2 (Hidden)
DTV
Satellite/DSS
DVD

Tuning channels

1
2

Tune to the channel or input.
Press and hold n for 3 seconds.

Note: Additions are added to the beginning of the Favorites list
on the left side of the Channel Browser™.

To delete a favorite channel/input:

1
2

Press n to open the Favorites browser list.

Press and hold = for 3 seconds. The channel/input will
be removed from the Favorites list.

Highlight the channel or input to delete by pressing
3 C or # c.

To set up the Channel Browser™:

1
2
3

Press Y and open the Preferences menu.
Highlight Channel Browser Setup and press T.
Press B to highlight Navigation, and then press C or c
to select either Browse Mode or Select Mode.
Channel Browser Setup
Navigation

Select Mode

History List

Power Off Clear (On)

ANT List

Inputs List

Favorites List

On
Reset

Done

HM67 (E/F) Web 213:276

50HM67_EN.book Page 39 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Press b to highlight History List, and then press C or c
to select the setting you prefer: either Power Off Clear
(On), On, or Off.
Note: When History List is set to On, the channels and
inputs stored in the list will be saved every power on/off
cycle. When History List is set to Power Off Clear (On),
the channels and inputs stored in the list will be cleared
with every power on/off cycle of the TV.

Press b to highlight ANT List, and then press C or c to
select On or Off.

Press b to highlight Inputs List, and then press C or c
to select On or Off.

Press b to highlight Favorites List, then press C or c to
select On or Off.

To save your entries, highlight Done and press T.
To return to factory defaults, highlight Reset and
press T.

• If all lists are turned off, pressing 3 C, # c, or n will
not display the Channel Browser™. If Favorites List is
turned off, n will have no effect.
• Pressing n will bring up the Channel Browser™
Favorites list regardless of the last selected list in the
Channel Browser™.

To tune to a channel or input in Browse mode:

While watching TV, press 3 C or # c to open the
Channel Browser™ and surf back to a previous item or
surf forward to the next item in the list.
In Browse mode, when you stop on an item in the
Channel Browser™, it will be highlighted and the TV will
automatically tune to the channel or input.

Press O to close the Channel Browser™.
Note: The Channel Browser™ will close automatically if
you do not make a selection within 30 seconds.

To open the Channel Browser™:

To tune to a channel or input in Select mode:

• Press 3 C or # c on the remote control.

While watching TV, press 3 C or # c to open the
Channel Browser™ and surf back to a previous item or
forward to the next item in the list.
In Select mode, when you stop on an item in the Channel
Browser™, it will be highlighted but you must press T to
tune the TV to the highlighted item.

2
3

Press T to tune the TV to the highlighted item.

• Press 3 C to surf backward through the previously tuned 32

channels in the History list, the channels in the ANT channel
list, the inputs in the Inputs list, or the favorite channels/
inputs in Favorites list.
• Press # c to surf forward through the channel History, the
ANT channel list, the Inputs list, or the favorite channels/
inputs in Favorites list.

Elements of the Channel
1

Press O to close the Channel Browser™.

Browser™

Adding and clearing channels and inputs in the
History List

Adding channels and inputs to the History List:

History

TVLAND

ABCHD

3
WEATHER

Current list (History, ANT, Inputs, or Favorites)

Input type

Channel or input currently being viewed

Channel or input that is currently highlighted in the
browser

Channels stored in the History List

Channel labels

To toggle among the available lists:
After opening the Channel Browser™, press B or b to toggle
among History, ANT, Inputs, and Favorites.
Note:
• The Channel Browser™ opens in History List by default.
Once another list has been selected, the Channel Browser™
will open in the last selected list.

As a channel or input is tuned, the Channel Browser™ adds it
to the History List and displays it on the “right side” of the
Channel Browser™. Previously tuned channels/inputs are
“shifted” to the left, eventually moving off the left side. Press
3 C to surf backward through the previously tuned channels/
inputs. Any channel or input that is tuned repeatedly will not
be repeated in the History List, but instead is moved to the end
of the list on the right side of the Channel Browser™.
The Channel Browser™ will store the following channels:
• All channels that are tuned using the numeric buttons on the
remote control.
• All channels that are tuned using < or , on the remote
control.
Note: Whenever an item is selected that cannot be tuned (for
various reasons), the TV will automatically tune to the
previously viewed channel or input.

(continued)

HM67 (E/F) Web 213:276

50HM67_EN.book Page 40 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Clearing channels from the History List:
• Reconfiguring the ANT input will clear the History List.
Note: See page 31 for details on configuring the antenna
input.
• Once 32 channels or inputs are stored in the History List, the

oldest item will be removed from the list when a new
channel or input is tuned.
• If History List in the Channel Browser Setup is set to
“Power Off Clear (On),” turning off the TV will clear the
History List.

Tuning to the next programmed channel
To tune to the next programmed channel:

Switching between two channels using
SurfLock™
The SurfLock™ feature temporarily “memorizes” one channel
to the R button, so you can return to that channel quickly
from any other channel by pressing R. To memorize a
channel to the R button:

Tune the TV to the channel you want to program into the
R button.

Press and hold R for about 2 seconds until the message
“Channel Memorized” appears on-screen. The channel
has been programmed to the R button.

You can then change channels repeatedly, and when you
press R, the memorized channel will be tuned.

Press < or , on the remote control or TV control panel.
Note:This feature will not work unless you program channels
into the TV’s channel memory (- page 32).

Tuning to a specific channel (programmed
or unprogrammed)

The TV will return to the memorized channel one time only.
Once you press R and then change channels again, the CH
RTN memory will be cleared and the button will function as
Channel Return, by switching back and forth between the last
two channels that are tuned. This feature also works for
external inputs.

Tuning analog channels:
Press the Channel Number (0–9) on the remote control. For
example, to select channel 125, press 1, 2, 5.

Tuning digital channels:
Press the Channel Number (0–9) on the remote control,
followed by the dash (=) button and then the sub-channel
number. For example, to select digital channel 125-1, press 1,
2, 5, –, 1.
Note: If a digital channel is not programmed—either through
the automatic channel scan (- page 32) or the channel add/
delete function (- page 32)—you will have to tune the RF
channel using the Channel Number and dash (=) on the
remote control.

Switching between two channels using
Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.

1
2

Select the first channel you want to view.

Press R on the remote control. The previous channel
will display. Each time you press R, the TV will switch
back and forth between the last two channels that were
tuned.

Select a second channel using the Channel Number
buttons (and the dash (=) button if selecting a digital
channel).

Note: If you press R from a non-antenna input, the TV
will return to the last-viewed input.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 41 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Selecting the picture size
You can view many program formats in a variety of picture
sizes—Natural, TheaterWide 1, TheaterWide 2,
TheaterWide 3, Full, and 4:3 HD.
Note: The “picture size” illustrations are examples only. The
format of the image (in any of the picture sizes) will vary
depending on the format of the signal you are currently
watching. Select the picture size that displays the current
program the way that looks best to you.

Note: If you select one of the TheaterWide® picture sizes, the
top and bottom edges of the picture (including subtitles or
captions) may be hidden. To view the hidden edges, either
scroll the picture (TheaterWide 2 and 3 only) or try viewing the
program in Full or Natural picture size.

Natural picture size
• The image is displayed close to its originally formatted

proportion. Some program formats will display with
sidebars and/or bars at the top and bottom.

You can save separate picture size preferences for each input
on your TV.

To select the picture size using the remote control:

1
2

Press I on the remote control.

Natural picture size example

While the Picture Size screen is open, you can do one of
the following to select the desired picture size:
• Repeatedly press I.
• Press the corresponding Number button (0–5) while the
Picture Size screen is open.
• Press B or b while the Picture Size screen is open.

TheaterWide 1 picture size (for 4:3 format programs)
• The center of the picture remains close to its original

proportion, but the left and right edges are stretched wider to
fill the screen.

Picture Size
0
1
2
3
4
5

Natural
TheaterWide 1
TheaterWide 2
TheaterWide 3
Full
4:3 HD

TheaterWide 1 picture size example

TheaterWide 2 picture size (for letter box programs)

0 - 5 / PIC SIZE to Select

To select the picture size using the menus:

1
2
3

Select Picture Size in the Theater Settings menu.
Press C or c to select the desired picture size setting.

• The picture is stretched wider to fill the width of the screen,

but only slightly stretched taller.
• The top and bottom edges of the picture may be hidden. To

view the hidden areas, see “Scrolling the TheaterWide®
picture” (- page 42).

Highlight Done and press T.
Theater Settings

Mode: Sports

Picture Size

Full

Picture Scroll

Cinema Mode

Film

Auto Aspect Ratio

Reset

ABCDEFG----------------

TheaterWide 2 picture size example

Done

Note: Some of the picture sizes may not be available
depending on the receiving signal format (those will be
“grayed out” in the Picture Size screen).
Using these functions to change the picture size (i.e.,
changing the height/ width ratio) for any purpose other than
your private viewing may be prohibited under the Copyright
Laws of the United States and other countries, and may
subject you to civil and criminal liability.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 42 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

TheaterWide 3 picture size (for letter box programs
with subtitles)
• The picture is stretched wider to fill the width of the screen,

Scrolling the TheaterWide® picture
(TheaterWide 2 and 3 only)

but only slightly stretched taller.
• The top and bottom edges are hidden. To view the hidden

areas (such as subtitles or captions), see “Scrolling the
TheaterWide® picture.”

You can set separate scroll settings for the TheaterWide 2 and
TheaterWide 3 modes for each input.

To set the scroll settings:

1
2
ABCDEFG----------------

Press Y and open the Video menu.
Highlight Theater Settings and press T.

ABCDEFG--------------------------

TheaterWide 3 picture size example

Video
Mode

Full picture size (for 16:9 [480i, 480p] source
programs only)

Noise Reduction
Game Mode
Theater Settings

• If receiving a squeezed 4:3 format program, the picture is

stretched wider to fill the width of the screen, but not
stretched taller.
• None of the picture is hidden.

Sports

Picture Settings
Off

In the Picture Size field, select either TheaterWide 2
or TheaterWide 3 (you cannot scroll in any other mode).

4
5

Press b to highlight the Picture Scroll field.
Press C or c to scroll the picture up and down as needed,
from –10 to +20.
Theater Settings

Mode: Sports

Picture Size

TheaterWide 2

Picture Scroll

Full picture size example

4:3 HD picture size (for 720p, 1080i, and 1080p
program sources only)
• Sidebars fill the empty vertical spaces.
• Picture is not distorted from original size.

-5

Cinema Mode

Film

Auto Aspect Ratio

Reset

Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

4:3 HD picture size example

HM67 (E/F) Web 213:276

50HM67_EN.book Page 43 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Using the auto aspect ratio feature
When the auto aspect ratio feature is set to On, the TV will
automatically select the picture size when one of the following
input sources is received:
• A 480i signal from the VIDEO 1, VIDEO 2, ColorStream
HD-1, or ColorStream HD-2 input.
• A 480i, 480p, 720p, 1080i, 1080p, or VGA signal from the
HDMI input.
Aspect ratio of Automatic aspect size (automatically
signal source selected when Auto Aspect is On)
4:3 normal

Natural (with sidebars)

4:3 letter box

TheaterWide 2

16:9 full

Full

Not defined
(no ID-1 data
or HDMI
aspect data)

To set the Cinema Mode to Film:

1
2
3

Press Y and open the Video menu.
Highlight Theater Settings and press T.
In the Cinema Mode field, select Film.
Mode: Sports

Picture Size

The current picture size you set under
“Selecting the picture size” on page 41.

Natural

Picture Scroll

Cinema Mode

Film

Auto Aspect Ratio

To turn on the auto aspect ratio feature:

Reset

On
Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

Press Y and open the Video menu.

To set the Cinema Mode to Video:

Highlight Theater Settings and press T.

Select Video in step 3 above.

In the Auto Aspect Ratio field, select On.
Theater Settings

Mode: Sports

Picture Size

Natural

Picture Scroll

Cinema Mode

Film

Auto Aspect Ratio

Reset

When you view a DVD (3:2 pulldown processed) from a DVD
player connected to the VIDEO 1, VIDEO 2, ColorStream
HD-1, ColorStream HD-2 (component video), or HDMI
inputs on the TV, smoother motion can be obtained by setting
the Cinema Mode to Film.

Theater Settings

Note: The auto aspect ratio feature is not applicable to
antenna or cable input sources.

1
2
3

Selecting the cinema mode
(480i and 1080i signals)

Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

To turn off the auto aspect ratio feature:
Select Off in step 3 above.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 44 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Adjusting the picture

Adjusting the picture quality
You can adjust the picture quality (Contrast, Brightness, Color,
Tint, and Sharpness) to your personal preferences.

Selecting the picture mode

Selection

Pressing C

Pressing c

You can select your desired picture settings from four different
modes, as described below.

Contrast

lower

higher

Brightness

darker

lighter

Mode

Picture Quality

Color

paler

deeper

Sports

Bright and dynamic picture (factory setting)

Tint

reddish

greenish

Standard

Standard picture settings (factory setting)

Sharpness

softer

sharper

Movie

Lower contrast for darkened room (factory
setting)

Preference

Your personal preferences

To select the picture mode:
Press u on the remote control.
The following popup menu appears on-screen.

To adjust the picture quality:

1
2
3

Sports
Standard

Press Y and open the Video menu.
Highlight Picture Settings and press T.
Press B or b to select the picture quality you want to
adjust (Contrast, Brightness, Color, Tint, or
Sharpness), and then press C or c to adjust the setting,
as described in the table above.
Mode: Sports

Picture Settings

Movie

Contrast

100

Preference

Brightness

Color

Press B or b to select the picture mode you prefer and
press T.

Tint

Sharpness

Advanced Picture Settings
Done

Reset

To select the picture mode using the menu system:
Picture Settings

1
2

Press Y and open the Video menu.
Highlight Mode and press T.

Video
Mode

Sports

Picture Settings

Contrast

Mode: Preference
70

To save the new settings, highlight Done and press T.
You can use any of the picture modes (- “Selecting the
picture mode,” above left) as a starting point for adjusting
the picture settings.
To revert back to the base mode that you began adjusting
the picture settings from, highlight Reset and press T.

Noise Reduction
Off

Game Mode
Theater Settings

Press B or b to select the picture mode you prefer and
press T.

The picture qualities you adjusted are automatically saved in
the Preference mode (- “Selecting the picture mode,”
above left) until Reset is selected.

Sports
Standard
Movie
Preference

Note: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 45 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Using the closed caption mode
Base closed captions
The closed caption mode has two options:
• Captions—An on-screen display of the dialogue, narration,
and sound effects of TV programs and videos that are closed
captioned (usually marked “CC” in program guides).
• Text—An on-screen display of information not related to
the current program, such as weather or stock data (when
provided by individual stations).

To view captions or text:

1
2
3

Press Y and open the Preferences menu.
Highlight Base CC Mode and press c.
Press B or b to select the desired closed caption mode and
press T.

Note: A closed caption signal may not display in the following
situations:
• When a videotape has been dubbed
• When the signal reception is weak
• When the signal reception is non-standard

Digital CC Settings
You can customize the closed caption display characteristics
by changing the background color, text size, type, edge, and
color.
Note:
• This feature is available for digital channels only.
• You cannot set the Caption Text and Background as the
same color.

To customize the closed captions:

1
2
3

Preferences
CC Selector
Base CC Mode

Off

Press Y and open the Preferences menu.
Highlight Digital CC Settings and press T.
Press B or b to highlight the characteristic you want to
change, and then press C or c to select the format for that
characteristic (see table below).

Off

Digital CC Settings

CC1

Input Labeling

CC2

Caption Size

Auto

Channel Labeling

CC3

Caption Text Type

Auto

Caption Text Edge

Auto

Caption Text Color

Auto

Background Color

Auto

Caption Text Edge Color

English

Menu Language
Channel Browser Setup

CC4
T1
T2

• To view captions:

Highlight CC1, CC2, CC3, or CC4. (CC1 displays
translation of the primary language in your area.)

Giant pandas eat leaves.

Note: If the program or video you selected is not closed
captioned, no captions will display on-screen.
• To view text:

Highlight T1, T2, T3, or T4.

WORLD WEATHER
LONDON
MOSCOW
PARIS
ROME
TOKYO

Auto

Preview
window

ABC123

Temps
F
C
51
11
57
14
53
12
66
19
65
18

Current
Weather
Clear
Cloudy
Clear
Cloudy
Rain

Note: If text is not available in your area, a black rectangle
may appear on screen. If this happens, set the Base CC
Mode to Off.

Reset

Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

Caption Size

Auto, Small, Standard, Large

Caption Text
Type

Auto, Default, Mono w. Serif, Prop. w. Serif,
Mono w/o Serif, Prop. w/o Serif, Casual,
Cursive, Small Capitals

Caption Text
Edge

Auto, None, Raised, Depressed, Uniform,
Left Drop Shadow, Right Drop shadow

Caption Text
Color

Auto, Black, White, Red, Green, Blue,
Yellow, Magenta, Cyan

Background
Color

Auto, Black, White, Red, Green, Blue,
Yellow, Magenta, Cyan

Caption Text
Edge Color

Auto, Black, White, Red, Green, Blue,
Yellow, Magenta, Cyan

• To turn off the closed caption mode:

Select Off in step 3 above.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 46 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

CC Selector
You can use the CC Selector to temporarily override the
default analog caption mode (set in Base CC Mode) for a
particular channel. However, once you change to another
analog channel, the closed caption setting will automatically
change back to the current Base CC Mode setting.
You can also use the CC Selector to select digital closed
caption services (if available). When such services are not
available, the CC Selector presents a default list of services.
If the selected service is not available, the next best service will
be used instead.

To select closed captions:

1
2

Press Y and open the Preferences menu.
Highlight CC Selector and press T.

Adjusting the audio
Muting the sound
Press W to partially reduce (1/2 MUTE) or turn off (MUTE)
the sound. Each time you press W, the mute mode will change
in the following order:

1/2 Mute

Mute

Volume

If the closed caption mode is set to Off when you select
“MUTE” mode, the closed caption feature is automatically
activated. To mute the audio without automatically activating
the closed caption feature, use Z to set the volume to 0. See
“Using the closed caption mode” (- page 45) for more
information on closed caption modes.

Using the digital audio selector
Preferences
CC Selector
Base CC Mode

Off

Off
CC1

Digital CC Settings
Input Labeling

CC2

Channel Labeling

CC3

Menu Language
Channel Browser Setup

English

CC4
T1
T2

Press B or b to select Closed Caption, and then press
C or c to select the desired service.
Closed Caption

CC 1

Audio

None

You can use the Digital Audio Selector to conveniently
switch between audio tracks on a digital channel (for those
channels that have multiple audio tracks). This temporarily
overrides the audio track chosen by the language option under
Audio Setup (- “Selecting stereo/SAP broadcasts” on
page 47).

To use the digital audio selector:

1
2

Press Y and open the Audio menu.
Highlight Digital Audio Selector and press T.

Press O.
Audio
Digital Audio Selector
Audio Settings
Advanced Audio Settings
Audio Setup

Press B or b to select Audio, and then press C or c to
select the desired service.
Closed Caption

CC 1

Audio

None

Press O.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 47 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Selecting stereo/SAP broadcasts
The multi-channel TV sound (MTS) feature allows you to
output high-fidelity stereo sound. MTS also can transmit a
second audio program (SAP) containing a second language,
music, or other audio information (when provided by
individual stations).
When the TV receives a stereo or SAP broadcast, the word
“STEREO” or “SAP” appears on-screen when E is pressed.
The MTS feature is not available when the TV is in VIDEO
mode.

To listen to stereo sound:

1
2

Press Y and open the Audio menu.
Highlight Audio Setup and press T.

To listen to a second audio program on an analog
station (if available):
Select SAP in step 3 above.
Note:
• A second audio program (SAP) can be heard only on those
TV stations that offer it. For example, a station might
broadcast another language as a second audio program. If
you have SAP on, you will see the current program on the
screen but hear the other language instead of the program’s
normal audio.
• If you have SAP on and the station you are watching is not
broadcasting a second audio program, the station’s normal
audio will be output. However, occasionally there is no
sound at all in SAP mode. If this happens, set the MTS
feature to Stereo mode.

Adjusting the audio quality
You can adjust the audio quality by adjusting the bass, treble,
and balance.

Audio
Digital Audio Selector
Audio Settings
Advanced Audio Settings

To adjust the audio quality:

Audio Setup

In the MTS field, select Stereo.
Audio Setup
PC Audio

HDMI 1 Audio

Auto

MTS

Stereo

Language

English

Optical Output Format
Dolby Digital
Dynamic Range Control
Reset

1
2
3

Press Y and open the Audio menu.
Highlight Audio Settings and press T.
Press b or B to highlight the item you want to adjust
(Bass, Treble, or Balance).
Audio Settings

Dolby Digital
Compressed

Bass

100

Treble

100

Balance

StableSound

Done

Off
Reset

To save the new settings, highlight Done and press T.
To reset the settings to the factory defaults, highlight
Reset and press T.
Note:
• You can typically leave the TV in Stereo mode because
it will automatically output the type of sound being
broadcast (stereo or monaural).
• If the stereo sound is noisy, select Mono to reduce the
noise.

To listen to an alternate language on an ATSC digital
station (if available):

Done

Press C or c to adjust the level.
• C makes the bass or treble weaker or increases the
balance in the left channel (depending on the item
selected).
• c makes the bass or treble stronger or increases the
balance in the right channel (depending on the item
selected).

To save the new settings, highlight Done and press T.
To reset the settings to the factory defaults, highlight
Reset and press T.

Highlight the Language field in step 3 above, and then press
C or c to select the language you prefer.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 48 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Using the StableSound® feature

The StableSound® feature limits the highest volume level to
prevent extreme changes in volume when the signal source
changes (for example, to prevent the sudden increase in
volume that often happens when a TV program switches to a
commercial).

Audio Setup
PC Audio

In the StableSound field, select On.
100

Treble

100

Balance

StableSound

On
Reset

Stereo

Language

English

Optical Output Format

Dolby Digital

Dolby Digital
Dynamic Range Control

Compressed

Reset

Audio Settings
Bass

Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: The RESET function returns your audio adjustments
to the following factory settings:

Bass . . . . . . . .
Treble . . . . . . .
Balance . . . . . .
StableSound . .

center (50)
center (50)
center (0)
Off

Auto

MTS

Press Y and open the Audio menu.
Highlight Audio Settings and press T.

HDMI 1 Audio

To turn on the StableSound® feature:

1
2
3

In the Optical Output Format field, select either
Dolby Digital or PCM, depending on your device.

Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

Using the Dolby® Digital Dynamic Range
Control feature
This dynamic range control feature causes the ATSC dynamic
range to be further compressed, allowing you to switch from
ATSC to analog broadcasts at the same dynamic range.

To use the Dolby Digital Dynamic Range Control:

1
2
3

To turn off the StableSound feature:

Press Y and open the Audio menu.
Highlight Audio Setup and press T.
In the Dolby Digital Dynamic Range Control field,
select Compressed. When Standard is selected, the
audio is output with minimal compression.
Audio Setup

Select Off in step 3 above.

PC Audio

HDMI 1 Audio

Auto

Selecting the optical audio output format

MTS

Stereo

Language

English

You can use this feature to select the optical audio output
format when you connect a Dolby Digital decoder or other
digital audio system to the Optical Audio Out terminal on
the TV (see “Connecting a digital audio system” on page 20).

Optical Output Format

Dolby Digital

Dolby Digital
Dynamic Range Control

Compressed

To select the optical audio output format:

1
2

Press Y and open the Audio menu.
Highlight Audio Setup and press T.

Reset

Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

Note:
• This item will be grayed out for NTSC signals, Video,
ColorStream, and PC inputs.
• The Dolby Digital Dynamic Range Control will function in
relation to Optical Output Format (PCM mode).

HM67 (E/F) Web 213:276

50HM67_EN.book Page 49 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

When the correct PIN code is entered, the Locks menu opens.

Using the Locks menu
The Locks menu includes the Enable Rating Blocking, Edit
Rating Limits, Channels Block, Input Lock, Front (control)
Panel Lock, and New PIN Code features. You can use these
features after entering the correct PIN code.

Locks
Enable Rating Blocking

Input Lock

Off

Front Panel Lock

Off

New PIN Code

Press Y and highlight the Locks menu icon.

If you cannot remember your PIN code
While the PIN code entering screen is displayed, press E
four times within five seconds. The PIN code will be cleared
and you can enter a new PIN code.

Locks
Enable Rating Blocking

Off

Channels Block

Entering the PIN code
1

Off

Edit Rating Limits

Off

Edit Rating Limits
Channels Block
Input Lock

Off

Front Panel Lock

Off

Changing your PIN code

New PIN Code

Press b, which displays the PIN code entry screen.
• The Lock System screen (below) appears if a PIN
code has not been stored. Press the Channel Number
buttons to enter a new four-digit code, enter the code a
second time to confirm, and press T.

1
2
3
4

Lock System

Press Y and highlight the Locks menu icon.
Press b to display the PIN code entering screen.
Enter your four-digit PIN code and press T.
Press b to highlight New PIN Code and press T.

Locks
Enable Rating Blocking

Please enter a 4 digit PIN code

Off

Edit Rating Limits

Off
On

Channels Block

Confirm PIN code

Input Lock

Off

Front Panel Lock

Off

New PIN Code

Cancel

Done

• The Locks/Active screen (below) appears if the PIN

code is already stored. Use the Number buttons to enter
your four-digit code and press T.

Press the Number buttons to enter a new four-digit code.
Reenter the PIN code to confirm it.

Press T. The new PIN code is now active.
New PIN Code

Locks

Active

Please enter a 4 digit PIN code
Please enter the 4 digit PIN code

* * * *

* * * *
Confirm PIN code
* * * *

Cancel

Done

If the wrong PIN code is entered, the message “Incorrect PIN
code, please try again!” appears. Highlight Retry and press
T. Enter the code again and press T.

Cancel

Done

HM67 (E/F) Web 213:276

50HM67_EN.book Page 50 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Blocking TV programs and movies
by rating (V-Chip)

Downloading an additional rating system
for blocking TV programs and movies

Some TV programs and movies include signals that classify
the content of the program (violence, sex, dialog, language).
The V-Chip feature in this TV detects the signals and blocks
the programs according to the ratings you select. (For rating
descriptions, see the tables on the next page.)

In the future, an additional rating system may become
available for use in selectively blocking programs.

Note: Rating blocking is a function of the V-Chip feature in this
TV, which supports the U.S. V-Chip system only.

To download the additional rating system
(if available):

To block and unblock TV programs and movies:

1
2
3
4
5
6

Press Y and highlight the Locks menu icon.

Highlight Alt RS and press T. The Edit Alternate
Ratings screen will appear.

1
2
3
4
5

Press Y and highlight the Locks menu icon.
Press b to display the PIN code entering screen.
Enter your four-digit PIN code and press T.
Press b to highlight Enable Rating Blocking.
Press c and b to select On, and then press T.

Note: The currently tuned station must be receiving a digital
signal before an additional rating system can be downloaded.

Locks
Enable Rating Blocking

Off

Edit Rating Limits
Off

Front Panel Lock

Off

Enter your four-digit PIN code and press T.
Press b to highlight Enable Rating Blocking.
Press c and b to select On, and press T.
Press b to highlight Edit Rating Limits and press T.
The Edit Rating Limits screen appears.

Note:
• The Alt RS button will only be available if an additional
rating system is currently available.
• It may take several minutes for the TV to download the
additional rating system.
• The information displayed in the Alternate Ratings
screen will depend on the configuration of the
additional rating system available at the time of
download.

Channels Block
Input Lock

Press b to display the PIN code entering screen.

New PIN Code

Press b to highlight Edit Rating Limits and press T.
The Edit Rating Limits screen (below) appears.

Press BbC c and then press T to select the level of
blocking you prefer. A box with an “5” is a rating that will
be blocked. As you highlight a rating, a definition for the
rating appears at the bottom of the screen.

When done selecting the ratings you want to block,
highlight Done and press T.

Press B b C c and then press T to select the level of
blocking you prefer. A box with an “5” is a rating that will
be blocked.

When you are finished selecting the ratings you want to
block, highlight Done and press T.

Edit Rating Limits
TV (V-CHIP) FV D L
TV-Y

Movies
G

Children

TV-Y7

TV-G

PG-13

TV-PG

TV-14

NC-17

Alt RS

TV-MA

Cancel

"None" Rated

Youth

Done

10 In the Edit Rating Limits screen, highlight Done and
press T.

Note:
• The additional rating system can only be downloaded one
time. You will not be able to download any updates to the
rating system should such updates become available.
• The additional rating system is not designed, transmitted, or
controlled by the TV or Toshiba, nor is the availability of an
additional rating system determined or controlled by
Toshiba. Similarly, the rating of programs in an additional
rating system is not determined, transmitted, or controlled
by the TV or Toshiba.
• The additional rating system is an evolving technology;
therefore, availability, content, and format may vary.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 51 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Independent rating system for broadcasters
Ratings
Description and Content themes
TV-MA

TV-14

Mature Audience Only (This program is specifically
designed to be viewed by adults and therefore may
be unsuitable for children under 17.)
L) Crude or indecent language S) Explicit sexual
activity V) Graphic violence
Parents Strongly Cautioned (This program contains
some material that many parents would find
unsuitable for children under 14 years of age.)
D) Intensely suggestive dialog L) Strong, coarse
language S) Intense sexual situations V) Intense

violence

TV-PG

Parental Guidance Suggested (This program
contains material parents may find unsuitable for
younger children.)
D) Some suggestive dialog L) Infrequent coarse
language S) Some sexual situations V) Moderate

Blocking channels
With the Channels Block feature, you can block specific
channels. You will not be able to tune blocked channels unless
you unlock them.

To block channels:

1
2
3

Press Y and highlight the Locks menu icon.

Press b to highlight Channels Block and then press T.
A list of the channels available for that input will be
displayed along with the call letters for each channel, if
available.

Press b to display the PIN code entering screen.
Enter your four-digit PIN code and press T
(- page 49).

violence

TV-G

General Audience (Most parents would find this
program suitable for all ages.)

TV-Y7,
TV-Y7FV

Directed to Older Children (This program is designed
for children age 7 and above. Note: Programs in
which fantasy violence may be more intense or more
combative than other programs in this category are
designated TV-Y7FV.)
All Children (This program is designed to be
appropriate for all children.)

TV-Y

Locks
Enable Rating Blocking

Off

Edit Rating Limits

Off
On

Channels Block
Input Lock

Off

Front Panel Lock

Off

New PIN Code

Independent rating system for movies
Ratings
Description and Content themes
X-rated (For adults only)
X
Not intended for anyone 17 and under
NC-17

Press Bb to highlight the channel you want to block and
press T, which puts an “5” in the box next to that
channel.
Channels Block
1
2
3
4

Restricted (Under 17 requires accompanying parent
or adult)

PG-13

Parents Strongly Cautioned (Some material may be
inappropriate for children under 13)

Allow All

Block All

Parental Guidance Suggested (Some material may
not be suitable for children)

Cancel

Done

General Audience (Appropriate for all ages)

Note:
• If you place an “5” in the box next to “ ‘None’ Rated,”
programs rated “None” will be blocked; however, programs
that do not provide any rating information will not be
blocked.
• To display the rating of the program you are watching, press
E on the remote control. If it is rated “None,” the word
“NONE” appears in the RECALL screen (as shown below
right). If rating information is not provided, no rating will
appear in the RECALL screen.
TV - PG L V

5
6

6
7

Repeat step 5 for other channels you want to block.
Highlight Done and press T.

To unblock individual channels:
In step 5 above, press Bb to highlight the channel you want to
unblock, press T to remove the “5” from the box, highlight
Done and press T.

NONE

(continued)

HM67 (E/F) Web 213:276

50HM67_EN.book Page 52 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Using the input lock feature

To block all channels at once:
Highlight Block All in step 5 on previous page and then
highlight Done and press T.

To unblock all locked channels at once:
Highlight Allow All in step 5 on previous page and then
highlight Done and press T.

You can use the Input Lock feature to lock the video inputs
(VIDEO 1, VIDEO 2, ColorStream HD-1, ColorStream
HD-2, HDMI 1, HDMI 2, HDMI 3 and PC) and channels 3 and
4. You will not be able to view the input sources or channels
until you unlock the inputs.

To lock/unlock the video inputs:

Channels Block
1
2
3
4
5
6
7

Allow All

Block All

Cancel

Done

1
2
3
4
5

Unlocking programs temporarily
If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:

This program exceeds the rating limit you set.
Push 'mute' to enter PIN.
You can either temporarily unlock the program or select an
unlocked program to watch.

Press Y and highlight the Locks menu icon.
Press b to display the PIN code entering screen.
Enter your four-digit PIN code and press T.
Press b to highlight Input Lock and press c.
Press B or b to select the level of video input locking you
prefer, as described below.
Video: Locks VIDEO 1, VIDEO 2, ColorStream HD1/
HD2, HDMI 1, HDMI 2, HDMI 3, and PC.
Video+: Locks VIDEO 1, VIDEO 2, ColorStream HD1/
HD2, HDMI 1, HDMI 2, HDMI 3, PC and channels 3 and
4.
• Select Video+ if you play video tapes via an ANT
input.

Locks
Enable Rating Blocking

Off

Edit Rating Limits
Channels Block

To temporarily unlock the program:

1
2

Press W.

Input Lock

Off

Front Panel Lock

Off

Video

New PIN Code

Enter your four-digit PIN code and press T. If the correct
code is entered, the program lock mode is released and the
normal picture appears. All locking is disabled until the
TV is turned off, and will be enabled when the TV is
turned on again.
Locks

Video +

Off: Unlocks all video inputs and channels 3 and 4.

Press T.

Active

Enter PIN code to temporarily unblock.

* * * *
Cancel

Done

HM67 (E/F) Web 213:276

50HM67_EN.book Page 53 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Using the control panel lock feature
You can lock the control panel to prevent your settings from
being changed accidentally (by children, for example). When
the control panel lock is On, none of the controls on the TV
control panel will operate except POWER.

To lock the control panel:

1
2
3
4
5

Press Y and highlight the Locks menu icon.
Press b to display the PIN code entering screen.

Using the PC settings feature
You can view an image from a PC on the TV screen.
When a PC is connected to the TV's PC IN terminal, you can
use the PC Settings feature to make adjustments to the image.
If the edges of the picture are cut off, readjust the Horizontal
Position and Vertical Position. If the picture is affected by
interference, readjust the Clock Phase and Sampling
Clock.

Enter your four-digit PIN code and press T.

To adjust the PC settings:

Press b to highlight Front Panel Lock.

Repeatedly press + to select PC input mode
(- “Selecting the video input source to view” page 37).

2
3

Press Y and open the Setup menu.

Press c and C or c to highlight On and press T. When
the control panel is locked and any button on the control
panel (except POWER) is pressed, the message “Not
Available” appears.

Locks
Enable Rating Blocking

Highlight PC Settings and press T.

Setup
Off

Installation

Edit Rating Limits

Sleep Timer

Channels Block

PC Settings

Input Lock

Off

Front Panel Lock

Off

New PIN Code

Power-On Mode

Fast

Off
On

To unlock the control panel:
Highlight Off in step 5 above, or press and hold the
VOLUME – button on the TV control panel for about 10
seconds until the volume icon appears.

Note: If a PC is not connected or there is no pc input
signal, this feature will be grayed out in the Setup menu.

4
5

Press B or b to highlight the item you want to adjust.
Press C or c to make the appropriate adjustments.
PC Settings
Horizontal Position

Vertical Position

Clock Phase

Sampling Clock
Reset

0
Done

Note: The screen is disrupted momentarily when
adjusting the PC settings. This is not a sign of malfunction.
• Horizontal Position:

Moves the picture left/right.
The adjustment range is within ±10 from center.*
• Vertical Position:
Moves the picture up/down.
The adjustment range is within ±10 from center.*
• Clock Phase:
Helps to reduce noise and sharpen the picture.
The adjustment range is within ±4 from center.*
• Sampling Clock:
Helps to reduce noise and minimize periodic vertical stripes
on the screen.
The adjustment range is within ±5 from center.*
* The default settings may vary depending on the input signal format.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 54 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Setting the PC Audio

Setting the sleep timer

This function allows you to output the sound from your PC (if
connected) or mute the sound from your PC and output the
sound from your HDMI (DVI) connection. (- page 21)

You can set the sleep timer to turn off the TV after a set length
of time (maximum of 180 minutes).

To set the sleep timer using the remote control:
To set the PC Audio:

1
2
3

Press Y and open the Audio menu.
Highlight Audio Setup and press T.
Press B or b to select PC Audio and then press C or c
to select No or Yes.
Yes: Outputs the sound from your PC.
No: Mutes the sound from your PC, and outputs the
sound from the HDMI-1 connection.

Press [ on the remote control to set the length of time until
the TV turns off. Repeatedly press [ to increase the time in
10-minute increments, or press B or b to increase or decrease
the time in 10-minute increments, to a maximum of 180
minutes.

To set the sleep timer using the on-screen menus:

1
2

Press Y and open the Setup menu.
Highlight Sleep Timer and press T.

Audio Setup
PC Audio

HDMI 1 Audio

Auto

MTS

Stereo

Language

English

Optical Output Format

Dolby Digital

Dolby Digital
Dynamic Range Control

Compressed

Reset

Done

Note: Because the PC and HDMI-1 inputs share the same
set of analog audio inputs, the PC Audio menu setting
influences the HDMI 1 Audio menu setting. If PC Audio is
set to “No,” the HDMI 1 Audio setting changes to “Auto.”
If PC Audio is set to “Yes,” the HDMI 1 Audio setting is
set to “Digital” and is grayed out in the menu. (Also see
item 3 on page 12 and “Setting the HDMI™ Audio mode”
on page 34.)

Setup
Installation
Sleep Timer
PC Settings
Power-On Mode

Fast

Press the Number buttons to enter the length of time in
10-minute increments.
Sleep Timer
Enter total minutes until the TV
turns off automatically (Maximum
180 minutes)
1 2 0

Cancel

Done

Highlight Done and press T.
Note: When a power failure occurs, the sleep timer setting
may be cleared.

To display the remaining sleep time:
Press [.
Sleep Timer

120 minutes

Note: A message will display on-screen when there is one
minute remaining on the sleep timer.

To cancel the sleep timer:
Repeatedly press [ until it is set to 0 minute.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 55 Wednesday, February 14, 2007 4:18 PM

Chapter 6: Using the TV’s features

Displaying TV status information

Understanding the auto power off
feature

To display TV status information using RECALL:
Press E on the remote control.
The following information will display (if applicable):
• Current input (ANT, VIDEO 1, etc.)
• If ANT is the current input, either “CABLE” (for cable TV)
or “ANT” (for over-the-air broadcasts).
• Channel number (if in ANT mode)
• Channel label (if set)
• Digital signal strength indicator (bar graph in lower right
corner of box; for ATSC signal only)
• Stereo, Mono or SAP audio status (when HDMI input mode,
Dolby Digital or PCM)
• Video resolution
• Aspect ratio of incoming video signal (4:3 or 16:9)
• V-Chip rating status
• Lamp Mode ( : High Bright)
ANT

123-456

Stereo SAP

1080i

16:9

The TV will automatically turn itself off after approximately
15 minutes if it is tuned to a vacant channel or a station that
completes its broadcast for the day. This feature functions in
ANT mode only.

Understanding the last mode
memory feature
If the power is cut off while you are viewing the TV, the
Last Mode Memory feature automatically turns on the TV
when the power is resupplied.
Note: You should unplug the TV’s power cord if it is possible
that you will be away from the TV for an extended period of time
after the power is restored.

TV-PG L V
9:00pm .

ABCHD

To close the RECALL screen:
Press E again.

To display TV status information using INFO:
Press Q on the remote control.
The following additional information will display for off air
digital channels (if applicable):
• Title
• Duration
• Detailed description
ANT

123-456
ABCHD

Stereo SAP

1080i

,
MLB Young s XXX...
,

16:9

TV-PG L V
9:00pm - 11:00pm

Today s Major League Baseball.

Note: The location of the banner can be moved to the top or
bottom of the screen by pressing B or b while the RECALL or
INFO display is on-screen. (The last position will be stored to
memory.)

HM67 (E/F) Web 213:276

50HM67_EN.book Page 56 Wednesday, February 14, 2007 4:18 PM

Chapter 7: Using the TV’s advanced features
Using the advanced picture settings
features

Using the static gamma feature
The static gamma feature allows you to adjust the levels of
black in the picture.

To adjust the static gamma settings:

Using dynamic contrast
When dynamic contrast is set to Low, Middle, or High, the
TV will detect changes in the picture quality that affect the
appearance of your contrast settings and then automatically
adjust the video.

1
2

Press Y and open the Video menu.
Highlight Picture Settings and press T.

Video

To select dynamic contrast preferences:

Mode

1
2

Game Mode
Theater Settings

Sports

Picture Settings
Noise Reduction

Press Y and open the Video menu.
Highlight Picture Settings and press T.

Off

Highlight Advanced Picture Settings and press T.
Mode: Sports

Picture Settings

Video
Mode

Sports

100

Brightness

Picture Settings

Color

Noise Reduction

Tint

Sharpness

Off

Game Mode
Theater Settings

Contrast

Advanced Picture Settings

Mode: Sports

Picture Settings
Contrast

100

Brightness

Color

Tint

Sharpness

Dynamic Contrast
Static Gamma

Reset

Dynamic Contrast
Static Gamma

Reset

Off

• If the setting is moved in the plus direction, the detail of

black colors will be increased.

Cool

High Bright

Lamp Mode

Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the
dynamic contrast setting, the picture mode automatically
changes to Preference.

Done

of black colors will be decreased.

Mode: Preference

Color Temperature

Cool

• If the setting is moved in the minus direction, the detail

Advanced Picture Settings

High

High Bright

Lamp Mode

In the Dynamic Contrast field, select either Off, Low,
Middle or High.

Mode: Preference

Color Temperature

Done

Reset

In the Static Gamma field, press C or c to adjust the
static gamma.
The adjustment range is within ±5 from center.
Advanced Picture Settings

Advanced Picture Settings

Done

Reset

Highlight Advanced Picture Settings and press T.

To save the new settings, highlight Done and press T.
To revert the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard or Movie) and then change the static
gamma setting, the picture mode automatically changes
to Preference.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 57 Wednesday, February 14, 2007 4:18 PM

Chapter 7: Using the TV’s advanced features

Selecting the color temperature

Selecting the lamp mode

You can change the quality of the picture by selecting from
three preset color temperatures (Cool, Medium, and Warm), as
described below.

You can select either the High Bright or Low Power lamp
mode.
The High Bright mode is useful when additional picture
brightness is desired (such as in a bright room).

Mode

Picture Quality

Cool

blueish

Medium

neutral

Warm

reddish

Note: The Lamp Mode field will be grayed out for a while after
the TV is turned on.

To select the lamp mode:

To select the color temperature:

1
2
3
4

Press Y and open the Video menu.
Highlight Picture Settings and press T.

1
2
3
4

Highlight Advanced Picture Settings and press T.
In the Color Temperature field, select the mode you
prefer (Cool, Medium, or Warm).

Press Y and open the Video menu.
Highlight Picture Settings and press T.
Highlight Advanced Picture Settings and press T.
In the Lamp Mode field, select either High Bright or
Low Power.
Advanced Picture Settings
Dynamic Contrast
Static Gamma

Advanced Picture Settings
Dynamic Contrast
Static Gamma

Cool

High Bright

Lamp Mode
Reset

Reset

Color Temperature

Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you select one of the factory-set picture modes
(Sports, Standard, or Movie) and then change the color
temperature mode, the picture mode automatically
changes to Preference.

Cool

High Bright

Lamp Mode

High

Color Temperature

Mode: Preference

Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.
Note: If you set the lamp mode to Low Power, each time
you turn on the TV, the lamp will start out in High Bright
mode but will switch to Low Power mode after a short
period of time. You may notice a change in screen
brightness when this happens. This is normal and is not a
sign of malfunction.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 58 Wednesday, February 14, 2007 4:18 PM

Chapter 7: Using the TV’s advanced features

Using CableClear® digital noise reduction

Using MPEG noise reduction

The CableClear® digital noise reduction feature allows you to
reduce visible interference in your TV picture. This may be
useful when receiving a broadcast with a weak signal
(especially a Cable channel) or playing a noisy video cassette
or disc.

The MPEG noise reduction feature allows you to reduce
visible interference caused by MPEG compression. Choices
for MPEG noise reduction are Off, Low, Middle, and High.
Off is automatically selected when this feature is disabled
(“grayed out”).

To change the CableClear settings:

To select the MPEG noise reduction level:

1
2

1
2
3

Press Y and open the Video menu.
Highlight Noise Reduction and press T.

Video
Mode

Highlight Noise Reduction and press T.
Press B or b to highlight the MPEG Noise Reduction
field, and then press C or c to select either Off, Low,
Middle or High.

Sports

Noise Reduction

Picture Settings
Noise Reduction
Game Mode
Theater Settings

Press Y and open the Video menu.

CableClear

Off

MPEG Noise Reduction
Reset

In the CableClear field, select your desired setting.
Noise Reduction
CableClear

ANT
Auto

MPEG Noise Reduction
Reset

ANT
Auto
Low
Done

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

Low
Done

Note:
• If the current input is ANT, VIDEO 1, or VIDEO 2, the
menu will display the text “CableClear.” The available
selections are Off, Auto, Low, Middle, and High.
• If the current input is ColorStream HD1, ColorStream
HD2, HDMI 1, HDMI 2, or HDMI 3 the menu will display
the text “DNR.” The available selections are Off, Auto,
Low, Middle, and High. Auto will react proportionally
to the strength of the noise. Low, Middle, and High will
reduce the noise in varying degrees, from lowest to
highest, respectively.

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 59 Wednesday, February 14, 2007 4:18 PM

Chapter 7: Using the TV’s advanced features

Using the Game Mode feature
You can use the Game Mode feature for shorter frame delays
when playing a video game requiring split-second timing
between the on-screen display and input from the controller
(such as music creation and high-action games).
This feature is more effective for 480i and 1080i input signals.
Note: To use the Game Mode feature, the current video input
must be Video 1, Video 2, ColorStream HD1,
ColorStream HD2, HDMI 1, HDMI 2, or HDMI 3. The Game
Mode cannot be turned on when any other video input is
selected.

To turn on Game Mode:

1
2

Using the advanced audio settings
features
Using the SRS WOW™ surround sound
feature
SRS WOW™ is a special combination of SRS Labs audio
technologies (SRS 3D, SRS Focus, and SRS TruBass) that
creates a thrilling surround sound experience with deep, rich
bass from stereo sound sources. Your TV’s audio will sound
fuller, richer, and wider.

Press Y and open the Video menu.

To adjust the WOW™ settings:

Press B or b to highlight the Game Mode field, and then
press C or c to select On.

Put the TV in STEREO mode (- “Selecting stereo/SAP
broadcasts” on page 47).

2
3
4

Press Y and open the Audio menu.

Video
Mode

Sports

Picture Settings
Noise Reduction
Game Mode
Theater Settings

Off

Highlight Advanced Audio Settings and press T.
Press b or B to highlight the WOW feature you want to
adjust, and then press C or c to adjust the item.

Off

Advanced Audio Settings

WOW: SRS 3D

To turn off Game Mode:

Off

WOW: SRS Focus

Off

WOW: SRS TruBass

Low

Select Off in step 2 above, change the video input, or turn the
TV off and then on again.

Reset

Done

• WOW: SRS 3D — To turn the surround sound effect

Note: You can change the video input by pressing + on the
remote control (- page 37).

On or Off.
Note: If the broadcast is monaural, the SRS 3D effect
will not work.
• WOW: SRS Focus — To turn the vocal emphasis effect

On or Off.
• WOW: SRS TruBass — To select the desired bass

expansion level (Off, Low, or High).

To save the new settings, highlight Done and press T.
To revert to the factory defaults, highlight Reset and
press T.

WOW, SRS and l symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 60 Wednesday, February 14, 2007 4:18 PM

Chapter 8: Troubleshooting
General troubleshooting
Before calling a service technician, please check this chapter
for a possible cause of the problem and some solutions you can
try.
Black box on-screen
• The closed caption feature is set to one of the Text modes
(T1, T2, T3, or T4). Set the closed caption feature to Off
(- page 45).
TV stops responding to controls
• If the TV stops responding to the controls on the remote
control or TV control panel and you cannot turn off the
TV, press and hold the POWER button on the TV control
panel for 5 or more seconds to reset the TV.
Other problems
• If your TV’s problem is not addressed in this
Troubleshooting section or the recommended solution
has not worked, use the Restore Factory Defaults
procedure (- page 36).
TV will not turn on
• Make sure the power cord is plugged in, and then press
p.
• The remote control batteries may be dead. Replace the
batteries or try the control panel buttons.
• If you have recently replaced the lamp unit, make sure the
lamp unit and lamp unit door are installed properly
(- pages 63–65).
• The lamp unit may need to be replaced (- pages 63–65).
Also see “LED indications” (- page 62).
• If the TV is powered off and then quickly on again when
the lamp unit is hot, it may take several minutes for the
picture to appear on-screen. This is a property of DLP®
TV lamp technology and is NOT a sign of malfunction.
For details, see “IMPORTANT NOTICE ABOUT HOT
LAMP RESTART” (- page 6).
Picture problems
General picture problems
• Check the antenna/cable connections (- Chapter 2).
• Press + on the remote control or TV and select a valid
video input source (- page 37). If no device is
connected to a particular input on the TV, no picture will
display when you select that particular input source. For
device connection details, see Chapter 2.
• Antenna reception may be poor. Use a highly directional
outdoor antenna (if applicable).
• The station may have broadcast difficulties. Try another
channel.
• Adjust the picture qualities (- page 44).
• If you are using a VCR, make sure l on the remote
control is set correctly (- page 24).
• Do not connect both a standard video cable and an
S-video cable to the VIDEO 2 input at the same time
(- page 15).

Noisy picture
• If you are watching an analog channel (off-air broadcast
or Cable TV), you can set the CableClear®/DNR
feature to AUTO to reduce visible interference in the TV
picture (- page 58).
Video Input Selection problems
• If the Input Selection window does not appear when
you press + on the remote control or TV, press + a
second time, which will change to the next video input
source and display the Input Selection window.
Cannot view external signals or channel 3 or 4
• If you cannot view signals from external devices
connected to VIDEO 1, VIDEO 2, ColorStream®,
HDMI 1, HDMI 2, HDMI 3, PC, or from channels 3 or 4,
make sure the Input Lock is set to Off (- page 52).
Poor color or no color
• The station may have broadcast difficulties. Try another
channel.
• Adjust the Tint and/or Color (- page 44).
Picture brightness changes soon after turning on TV
• If you set the lamp mode to Low Power, each time you
turn on the TV, the lamp will start out in High Bright
mode but will switch to Low Power mode after a short
period of time. You may notice a change in screen
brightness when this happens. This is normal and is not a
sign of malfunction (- page 57).
Poor composite or S-video picture
• If the TV is connected to an external A/V device (e.g.,
DVD player, video game system, set-top box, etc.) try
using a ColorStream or HDMI video connection
instead.
Picture and sound are out of sync
• As with all products that contain a digital display, in rare
instances, when viewing certain content (e.g.. television
broadcasts, video games, DVDs), you may notice that the
sound and picture are slightly out of sync. This
phenomenon can be caused by various factors including,
without limitation, video processing within the TV, video
processing in an attached gaming system, and video
processing or different compression rates used by
broadcasters in their programming. You may want to try
one or more of the following suggestions, which may
help to reduce the effect of this phenomenon:
– If the TV is connected to an A/V receiver that has a
programmable audio delay feature, use this feature to
help synchronize the sound to the picture.
– If you notice this phenomenon only on certain TV
channels, please contact your local broadcast, cable, or
satellite provider to inform them of this issue.
LED indications while in reboot from standby
• When you plug the power cord in, the yellow LED will
blink until the TV enters standby mode, (plugged in but
not powered on). This is normal and is not a sign of
malfunction.
Sound problems
• Check the antenna/cable connections (- Chapter 2).
• The station may have broadcast difficulties. Try another
channel.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 61 Wednesday, February 14, 2007 4:18 PM

Chapter 8: Troubleshooting

• The sound may be muted. Press VOLUME.
• If you hear no sound, try setting the MTS feature to

Stereo mode (- page 47).
• If you are not receiving a second audio program from a

known SAP source, make sure the MTS feature is set to
SAP mode (- page 47).
• If you hear audio that seems “incorrect” for the program
you are watching (such as music or a foreign language),
the SAP mode may be on. Set the MTS feature to Stereo
mode (- page 47).
• When using an external audio amplifier, if you connect
the amplifier to the FIXED AUDIO OUT terminals, the
volume of the amplifier must be set above 0 or you will
not hear any sound (- page 20).

Rating blocking (V-Chip) problems
• If you forget your PIN code: While the PIN code entering
screen is displayed, press E four times within 5
seconds. The PIN code you previously stored will be
cleared (- page 49).
• The V-Chip feature is available for the U.S. V-Chip
system only (- page 50).

Remote control problems
• Make sure the remote control is set to the correct device
mode (- page 23).
• Remove all obstructions between the remote control and
the TV.
• The remote control batteries may be dead. Replace the
batteries (- page 22).
• Your TV remote control may not operate certain features
on your external device. Refer to the owner’s manual for
your other device to determine its available features. If
your TV remote control does not operate a specific
feature on another device, use the remote control that
came with the device (- pages 24–28).
• If the TV still does not act as expected, use the Reset
Factory Defaults procedure (- page 36).
Channel tuning problems
• Make sure the remote control is set to the correct device
mode (- page 23).
• The channel may have been erased from the channel
memory by the Channel Add/Delete feature. Add the
channel to the channel memory (- page 32).
• The channel may be blocked by the Channels Block
feature. Unblock the channel (- page 51).
• If you are unable to tune digital channels, check the
antenna configuration (- page 31). If you are still
unable to tune digital channels, clear all channels from
the channel list (- page 33) and reprogram channels
into the channel memory (- page 32). If you are still
unable to tune digital channels, use the Reset Factory
Defaults procedure (- page 36). Also see “TV stops
responding to controls” and “Other problems”
(- page 60).
Closed caption problems
• If the program or video you selected is not closedcaptioned, no captions will display (- page 45).
• If text is not available, a black rectangle may appear.
If this happens, turn off the closed caption feature (page 45).
• A closed-caption signal may not display correctly in the
following situations: a) when a videotape has been
dubbed; b) when the signal reception is weak; or c) when
the signal reception is nonstandard (- page 45).

HM67 (E/F) Web 213:276

50HM67_EN.book Page 62 Wednesday, February 14, 2007 4:18 PM

Chapter 8: Troubleshooting

LED indications
The yellow, blue, and red/green LED lights on the TV (at the bottom center of the TV) indicate the TV’s status, as described below.
Note: If the TV loses A/C power (e.g., a power outage occurs or the power cord is unplugged), when power is restored, the yellow
LED will blink while the TV is booting until the remote control is usable. This is normal and is not a sign of malfunction.

“Voice announce” feature

TV front

When certain non-standard conditions occur, the LEDs
on the TV will blink and the TV will play a recorded
“voice announcement” describing the condition (see the table below
for the specific conditions that include a voice announcement).
To repeat the voice announcement and hear additional information,
press the MENU button on the TV while the LEDs are blinking.

Yellow LED Blue LED Red/Green LED

LED Indication

Condition

1) Blue is ON (solid).

The TV is operating
properly.

2) Green is ON (solid).

Power-On Mode Fast.

3) Yellow blinks.

Standby with Power-On
Mode Fast.

4) Blue is ON (solid).
Yellow blinks.

The lamp is not working
properly.

Voice
Announce

Solution
–

–

See “Setting the Power-On Mode feature” (- page
35).

–

The TV will automatically try to restart itself eight times
(see item #4).
Note: If the TV is powered off and then quickly on again
when the lamp unit is hot, it may take several minutes
for the picture to appear on-screen. This is a property of
DLP® TV lamp technology and is NOT a sign of
malfunction. For details, see “Setting the Power-On
Mode feature” and “IMPORTANT NOTICE ABOUT
HOT LAMP RESTART” (- page 35).

–

5) Yellow is ON
(solid). Red blinks.

The lamp is not working
properly after the eighth
automatic restart (see
item #3).

Turn the TV OFF and then ON again. If the problem
persists, contact TACP Consumer Solutions at 1-800631-3811 in the U.S. or TCL Customer Service at
1-800-268-3404 in Canada.

“Lamp not
working”

6) Yellow is ON
(solid).

The lamp unit door is not
seated properly.

Turn OFF the TV and unplug the power cord. Review
“Lamp unit replacement and care” in Chapter 9 to
ensure that the lamp door is installed securely.

“Lamp door is
open.”

7) Red blinks.

Fan stopped.

“Fan stopped.”

8) Blue blinks slowly.
Red blinks.

Abnormal operation of
BUS line. (light engine).

–

9) Blue blinks slowly.

Abnormal operation of
BUS line.

10)Blue blinks quickly.

Power Protect
Detection.

–

11)Blue blinks quickly.
Red blinks.

The color wheel has
stopped.

“Color wheel
stopped.”

12)Blue blinks quickly.
Yellow blinks.
Red blinks.

An abnormal
temperature increase
has occurred.

Turn OFF the TV and unplug the power cord. Plug the
power cord in again and turn ON the TV.

Turn OFF the TV. Check to make sure none of the slots
or openings in the TV cabinet are covered, blocked, or
dusty. Turn ON the TV again.

–

“Temperature
warning.”

If, after trying the solution, the problem still exists:
• In the U.S., call TACP Consumer Solutions at 1-800-631-3811.
• In Canada, locate the nearest Toshiba authorized service depot by directing your web browser to www.toshiba.ca; click
“Home Entertainment,” and then click “Support.”

HM67 (E/F) Web 213:276

50HM67_EN.book Page 63 Wednesday, February 14, 2007 4:18 PM

Chapter 9: Appendix
Lamp unit replacement and care

When to replace the lamp unit
You should replace the lamp unit:

Replacing the lamp unit
(User-replaceable component)
WARNING: RISK OF ELECTRIC
SHOCK!
TO REDUCE THE RISK OF ELECTRIC
SHOCK, NEVER REMOVE TV COVERS, EXCEPT AS
SPECIFIED HEREIN. REFER ALL SERVICING NOT
SPECIFIED IN THIS MANUAL TO QUALIFIED SERVICE
PERSONNEL. Failure to follow this WARNING may result in
death or serious injury.

The light source for this TV is a mercury lamp with internal
atmospheric pressure that increases during use. The lamp has a
limited service life that varies depending on product use and
user settings.
As is generally the case with all projection TVs that use
projection lamps as a light source, the brightness of the lamp
in this TV may vary somewhat over the expected service life
and will generally decrease over time. Because of the many
variables that can affect the useful service life of the lamp, your
experience may vary from other users.
Note : The lamp is warranted only for the periods and to the
extent set forth in the Limited Warranty applicable to this set.
See “Limited United States Warranty” (- page 67) or “Limited
Canadian Warranty” (- page 68), as applicable.

If you use the lamp beyond its service life:
• you may notice a reduction in the colors and/or brightness of

the picture; and

• if the picture darkens and/or colors fade;
• if the screen (lamp) does not light (LED indication #4,

- page 62); or
• if you hear a loud noise and the picture goes black, which
may indicate a lamp rupture (LED indication #4,
- page 62).

To obtain a replacement lamp unit:
In the U.S.
In warranty:

Visit www.tacp.toshiba.com/service or
call toll-free 1-800-631-3811.

Out of
warranty:

Visit www.ceaccessories.toshiba.com or
consult your consumer electronics dealer.

In Canada
Locate a Toshiba parts distributor by visiting
www.toshiba.ca. Click “Home Entertainment” and then
click “Support.”
Always replace the lamp unit with the model
currently recommended by Toshiba.
For more information, please contact us at the
telephone numbers or websites listed above, as
applicable.
Using any lamp other than those recommended by
Toshiba may cause damage to the TV and/or lamp.
SUCH DAMAGE IS NOT COVERED UNDER YOUR
TOSHIBA WARRANTY.

• the strength of the quartz glass in the lamp will be reduced

and the lamp may rupture (often making a loud noise when
this happens). If the lamp ruptures, the TV will not operate
until the lamp unit is replaced.

CAUTION: Always handle the lamp unit
with care.
The lamp unit in this TV was designed for safe
replacement by consumers; however, if the lamp unit is
subjected to intentional abuse (such as excessive
mechanical abuse or handling by children or pets), the unit
may break, exposing sharp edges or pinch points.

HM67 (E/F) Web 213:276

50HM67_EN.book Page 64 Wednesday, February 14, 2007 4:18 PM

Chapter 9: Appendix

How to replace the lamp unit

Using a manual Phillips screwdriver, loosen the two
screws on the lamp unit.

WARNING: RISK OF ELECTRIC
SHOCK!
TO REDUCE THE RISK OF ELECTRIC
SHOCK, NEVER REMOVE TV COVERS, EXCEPT AS
SPECIFIED HEREIN. REFER ALL SERVICING NOT
SPECIFIED IN THIS MANUAL TO QUALIFIED SERVICE
PERSONNEL. Failure to follow this WARNING may result in
death or serious injury.

Required tools:
Lamp unit screws

• Manual screwdrivers (Phillips and slotted)
• Soft, lint-free gloves

Turn off the TV and unplug the power cord.

WARNING: Eye damage may result from
directly viewing the light produced by
this lamp.
Always turn off the TV and unplug the power cord before
opening the lamp unit door.

WARNING: RISK OF ELECTRIC
SHOCK!
The lamp unit door is provided with an
interlock to reduce the risk of electric shock and excessive
ultraviolet radiation. Never defeat its purpose or attempt
to service without removing the lamp unit door
completely. Failure to follow this WARNING may result in
death or serious injury.

5
STOP! Allow the lamp to cool for at least one (1) hour
before replacing it.

Grasp the lamp unit handle and gently pull the lamp unit
straight out of the TV. Set the old lamp unit aside
(- “Disposing of the used lamp unit” on page 65).
50HM67

On the lamp unit door on the back of the TV, loosen the
screw using a manual screwdriver, and then remove the
lamp unit door.
TV back

NOTE: Wear soft, lint-free gloves when
replacing the lamp unit.

Lamp unit door detail

Carefully insert the new lamp unit straight into the TV
until it is fully seated.

Loosen screw
using manual
screwdriver

HM67 (E/F) Web 213:276

50HM67_EN.book Page 65 Wednesday, February 14, 2007 4:18 PM

Chapter 9: Appendix

Note:
• Never subject the lamp unit to excessive shock.
• Never touch the lamp unit glass or otherwise get it dirty.
Doing so may affect the image quality and reduce the
service life of the lamp. See “Cleaning the lamp unit glass”
below.

Replace the screw and tighten using a manual
screwdriver.

CLEANING THE LAMP UNIT GLASS
If you accidentally touch the lamp unit glass or otherwise get
it dirty, wipe it with a lint-free lens cleaning cloth (such as a
cloth for cleaning camera lenses or eyeglasses).

CAUTION: NEVER clean a hot lamp with any
type of flammable liquid or aerosol cleaning
agent. Many ordinary cleaning agents (such as
glass cleaners) contain chemicals that may be flammable at
certain temperatures. If the lamp unit is not allowed to cool for at
least one (1) hour, such chemicals may ignite.

Lamp unit door

NOTE: Make sure the lamp unit door is installed
securely; otherwise, the TV may not turn on.

10 Plug in the power cord and turn on the TV. After the initial
Using a manual Phillips screwdriver, tighten the two lamp
unit screws.
Note: Hand-tighten only. Do not use an electric
screwdriver.

Lamp unit screws
(use manual Phillips screwdriver only)

NOTE : Make sure the lamp unit and screws are
installed securely; otherwise, the TV may not turn
on and the lamp life may be shortened.

Hand-tighten using a
manual screwdriver

Reattach the lamp unit door, making sure to insert the
hooks on the left side of the lamp unit door inside the
opening in the TV cabinet.

warmup period (which may take several seconds for full
picture brightness), the TV should operate normally. If
any of the following conditions exist, turn off the TV,
unplug the power cord, and repeat steps 1–9 to ensure that
the lamp unit and lamp unit door are installed correctly:
• No picture
• Dark picture
• TV will not turn on
If, after repeating steps 1–9, the problem still exists:
• In the U.S., call TACP Consumer Solutions at
1-800-631-3811.
• In Canada, locate the nearest Toshiba authorized
service depot by directing your web browser to
www.toshiba.ca; click “Home Entertainment,” and
then click “Support.”

Disposing of the used lamp unit
• Place the used lamp unit in the empty box from the new unit.
• Keep the lamp unit out of reach of children and pets.

CAUTION: Always handle the lamp unit
with care.
The lamp unit in this TV was designed for safe
replacement by consumers; however, if the lamp unit is
subjected to intentional or accidental abuse (such as
excessive mechanical abuse or handling by children or
pets), the unit may break, exposing sharp edges or pinch
points.
• Dispose of the used lamp unit by the approved method for

Insert the hooks inside the
TV cabinet opening.

your area.

Lamp unit door

NOTE: The lamp unit contains mercury.
Disposal of mercury may be regulated due to
environmental considerations. For disposal or
recycling information, contact your local authorities or the
Electronic Industries Alliance (www.eiae.org).

HM67 (E/F) Web 213:276

50HM67_EN.book Page 66 Wednesday, February 14, 2007 4:18 PM

Chapter 9: Appendix

Specifications
Note:
• This model complies with the specifications listed
below.
• Designs and specifications are subject to change
without notice.
• This model may not be compatible with features and/or
specifications that may be added in the future.

Television System
NTSC standard
ATSC standard (8VSB)
Digital Cable (64 QAM, 256 QAM; in-the-clear,
unencrypted)
Channel Coverage
VHF: 2 through 13
UHF: 14 through 69
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 135)
Power Source
120 V AC, 60 Hz
Power Consumption
50HM67: 200 W (average)
Less than 1W in standby POWER-SAVING
MODE
15W in standby POWER-FAST MODE
57/65HM167: 205 W (average)
Less than 1 W in standby POWER-SAVING
MODE
15 W in standby POWER-FAST MODE
Audio Power
10 W + 10 W
Speaker Type
Main:
Two 2-3/8 × 4-3/4 inches (60 × 120 mm) round
Tweeter: Two 1-5/16 inches (33 mm) round
Video/Audio Terminals
S-VIDEO INPUT:
Y: 1 V(p-p), 75 ohm, negative sync.
C: 0.286 V(p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT:
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k
ohm or greater)
ColorStream® (component video) HD INPUT:
VIDEO:Y: 1V(p-p), 75 ohm
PR: 0.7 V(p-p), 75 ohm
PB: 0.7 V(p-p), 75 ohm
Suggested formats: 1080i, 720p, 480p, 480i
AUDIO: 150 mV(rms), 22 k ohm or greater
HDMI™ INPUT:
HDMI compliant (type A connector)
HDCP compliant

E-EDID* compliant
Suggested formats: 1080p, 1080i, 720p, 480p, 480i,
VGA
HDMI Audio: 2-channel L-PCM; 32/44.1/48 kHz
sampling frequency; 16/20/24 bits per sample
FIXED AUDIO OUTPUT:
150 mv (rms) (30% modulation equivalent, 2.2 k ohm
or less)
DIGITAL AUDIO OUTPUT:
Optical type
IR OUT:
3 V(p-p), 3.5 mm mono socket
PC INPUT:
15-Pin D-sub Analog RGB
Pin No.
1
2
3
4
5
6
7
8

Signal name
R
G
B
NC
(Not connected)
NC
Ground
Ground
Ground

Pin No.
9
10
11

Signal name
NC
Ground
NC

13
14
15

H-sync
V-sync
NC

Dimensions
50HM67:

Width: 47-3/16 inches (1,199 mm)
Height: 30-11/16 inches (780 mm)
Depth: 16-5/8 inches (422 mm)
57HM167: Width: 52-3/8 inches (1,331 mm)
Height: 33-3/4 inches (857 mm)
Depth: 18-3/4 inches (476 mm)
65HM167: Width: 58 inches (1,473 mm)
Height: 37-1/8 inches (942 mm)
Depth: 21-11/16 inches (550 mm)

Mass (weight)
50HM67: 64.0 lbs (29.0 kg)
57HM167: 72.0 lbs (32.6 kg)
65HM167: 83.0 lbs (37.6 kg)
Operating conditions
Temperature: 41ºF - 95ºF (5ºC - 35ºC)
Humidity: 20 - 80% (no moisture condensation)
Supplied Accessories
• Remote control with two size “AAA” batteries
• Owner’s manual (this book)
Optional Stands
50HM67: ST 5067
57HM167:ST 57167
65HM167:ST 65167
* E-EDID = Enhanced-Extended Display Identification

HM67 (E/F) Web 213:276

50HM67_EN.book Page 67 Wednesday, February 14, 2007 4:18 PM

Chapter 9: Appendix

Limited United States Warranty
for DLP® Television Models
Toshiba America Consumer Products, L.L.C. (“TACP”) makes the
following limited warranties to original consumers in the United States.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL
CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DLP®
TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE.
DLP® TELEVISIONS PURCHASED IN THE U.S.A. AND USED
ANYWHERE OUTSIDE OF THE U.S.A., INCLUDING, WITHOUT
LIMITATION, CANADA AND MEXICO, ARE NOT COVERED BY THESE
WARRANTIES.
DLP® TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF THE
U.S.A., INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO,
AND USED IN THE U.S.A., ARE NOT COVERED BY THESE
WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor
TACP warrants this DLP® Television and its parts against defects in
materials or workmanship for a period of one (1) year after the date of
original retail purchase. DURING THIS PERIOD, TACP WILL, AT TACP'S
OPTION, REPAIR OR REPLACE A DEFECTIVE PART WITH A NEW OR
REFURBISHED PART WITHOUT CHARGE TO YOU FOR PARTS OR
LABOR. During this period, TACP Authorized Service Station personnel
will come to your home when warranty service is required. Depending on
the type of repair required, the service will either be performed in your
home or the DLP® Television will be taken to a TACP Authorized Service
Station for repair and returned to your home at no cost to you.
Limited One (1) Year Warranty on Lamp Unit
TACP warrants the original lamp unit contained in this DLP® Television
against defects in materials or workmanship for a period of one (1) year
after the date of original retail purchase. DURING THIS PERIOD, TACP
WILL, AT TACP'S OPTION, EXCHANGE A DEFECTIVE LAMP UNIT
WITH A NEW OR REFURBISHED LAMP UNIT WITHOUT CHARGE TO
YOU. LABOR CHARGES FOR LAMP UNIT REPLACEMENT ARE YOUR
RESPONSIBILITY AND ARE NOT COVERED UNDER THIS
WARRANTY. The lamp unit is a user-replaceable component.
Rental Units
The warranty for DLP® Television rental units begins on the date of the first
rental or thirty (30) days after the date of shipment to the rental firm,
whichever comes first.
Limited Warranty for Commercial Units
TACP warrants DLP® Televisions, including the lamp units contained
therein, that are sold and used for commercial purposes as follows: all
parts are warranted against defects in materials or workmanship for a
period of ninety (90) days after the date of original retail purchase.
DURING THIS PERIOD, TACP WILL, AT TACP'S OPTION, REPAIR OR
REPLACE A DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU.
Owner's Manual and Product Registration Card
Read this owner’s manual thoroughly before operating this DLP®
Television.
Complete and mail the enclosed product registration card or register your
DLP® Television online at www.tacp.toshiba.com/service as soon as
possible. By registering your DLP® Television you will enable TACP to bring
you new products specifically designed to meet your needs and help us to
contact you in the unlikely event a safety notification is required under the
U.S. Consumer Product Safety Act. Failure to complete and return the
product registration card does not diminish your warranty rights.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:

(1) You must retain your original bill of sale or provide other proof of
purchase.
(2) All warranty servicing of this DLP® Television must be performed by
an Authorized TACP Service Station.
(3) The warranties from TACP are effective only if this DLP® Television is
purchased and operated in the Continental U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment of
customer controls, and installation or repair of antenna systems are
not covered by this warranty. Reception problems caused by
inadequate antenna systems, misaligned satellite dishes, cable
television distribution, VCRs, DVD players/recorders, personal
computer level IEEE 1394 devices, and any other connected signal
source device are your responsibility.
(5) Warranties extend only to defects in materials or workmanship as
limited above, and do not extend to any DLP® Television or parts that
have been lost or discarded by you or to damage to the DLP®
Television or parts caused by fires, misuse, accident, Acts of God
(such as lightning or fluctuations in electric power), improper
installation, improper maintenance, or use in violation of instructions
furnished by TACP; use or malfunction through simultaneous use of
this DLP® Television and connected equipment; or to units that have
been modified or had the serial number removed, altered, defaced,
or rendered illegible.
How to Obtain Warranty Service
If, after following all of the operating instructions in this manual and
reviewing the section entitled “Troubleshooting,” you find that service is
needed:
(1) To find the nearest TACP Authorized Service Station, visit TACP’s
website at www.tacp.toshiba.com/service or contact TACP’s
Consumer Solution Center toll free at 1-800-631-3811.
(2) You must present your original bill of sale or other proof of purchase
to the TACP Authorized Service Station.
For additional information, visit TACP's website:
www.tacp.toshiba.com.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE
U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE EXPRESSLY LIMITED TO THE DURATION OF THE LIMITED
WARRANTIES SET FORTH ABOVE. WITH THE EXCEPTION OF ANY
WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A.
AS HEREBY LIMITED, THE FOREGOING WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES, GUARANTEES,
AGREEMENTS, AND SIMILAR OBLIGATIONS OF TACP WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO
EVENT SHALL TACP BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST
PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR
ERASURE OF RECORDED DATA CAUSED BY USE, MISUSE OR
INABILITY TO USE THIS DLP® TELEVISION).
No person, agent, distributor, dealer, or company is authorized to change,
modify, or extend the terms of these warranties in any manner whatsoever.
The time within which an action must be commenced to enforce any
obligation of TACP arising under the warranty or under any statute or law
of the United States or any state thereof is hereby limited to ninety (90)
days from the date you discover, or should have discovered, the defect.
This limitation does not apply to implied warranties arising under the law
of any state of the U.S.A.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE
TO STATE IN THE U.S.A. SOME STATES OF THE U.S.A. DO NOT
ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED
WARRANTY, WHEN AN ACTION MAY BE BROUGHT, OR THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES. THEREFORE, THE ABOVE PROVISIONS MAY NOT APPLY
TO YOU UNDER SUCH CIRCUMSTANCES.
05

HM67 (E/F) Web 213:276

50HM67_EN.book Page 68 Wednesday, February 14, 2007 4:18 PM

Chapter 9: Appendix

Limited Canadian Warranty
for Toshiba Brand DLP® Television Models
Toshiba of Canada Limited (“TCL”) makes the following limited warranties
to original consumers in Canada. THESE LIMITED WARRANTIES
EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY
PERSON RECEIVING THIS TOSHIBA BRAND DLP® TELEVISION
MODEL (the “TELEVISION(S)” or “Television(s)”) AS A GIFT FROM THE
ORIGINAL CONSUMER PURCHASER AND TO NO OTHER
PURCHASER OR TRANSFEREE.
TELEVISIONS PURCHASED IN CANADA, AND USED ANYWHERE
OUTSIDE OF CANADA INCLUDING, WITHOUT LIMITATION, THE
UNITED STATES AND MEXICO, ARE NOT COVERED BY THESE
WARRANTIES.
TELEVISIONS PURCHASED ANYWHERE OUTSIDE OF CANADA,
INCLUDING, WITHOUT LIMITATION, THE UNITED STATES AND
MEXICO, AND USED IN CANADA, ARE NOT COVERED BY THESE
WARRANTIES.
Limited One (1) Year Warranty on Parts and Labour
Subject to the more limited warranty if the Television is used for any
commercial or business purposes as set out below, TCL warrants the
Television and its parts, excluding the lamp unit, against material defects
in materials or workmanship that result in the Television failing for a period
of one (1) year after the date of original retail purchase. DURING THIS
PERIOD, TCL WILL, AT TCL'S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR PARTS OR LABOR. During this period, TCL
Television authorized service provider (“ASP”) personnel will come to
your home when warranty service is required. Depending on the type of
repair required, the service will either be performed in your home or the
Television will be taken to an ASP for repair and returned to your home at
no cost to you. IN-HOME SERVICE ONLY APPLIES WITHIN 100
KILOMETERS OF AN ASP. IF YOU ARE NOT WITHIN 100
KILOMETERS OF AN ASP, YOU MUST DELIVER THE ENTIRE
TELEVISION TO AN ASP. YOU MUST PAY FOR ALL
TRANSPORTATION AND INSURANCE CHARGES FOR THE
TELEVISION TO AND FROM THE ASP.
Limited One (1) Year Warranty on the Lamp Unit
TCL warrants the lamp unit in this Television against material defects in
materials or workmanship for a period of one (1) year after the date of
original retail purchase. DURING THIS PERIOD, TCL WILL, AT TCL'S
OPTION, REPAIR OR REPLACE THE DEFECTIVE LAMP UNIT WITH A
NEW OR REFURBISHED LAMP UNIT WITHOUT CHARGE TO YOU
FOR THE LAMP UNIT. YOU MUST DELIVER THE ENTIRE LAMP UNIT
TO AN ASP. YOU MUST PAY FOR ALL TRANSPORTATION AND
INSURANCE CHARGES FOR THE LAMP UNIT TO AND FROM THE
ASP.
Limited Warranty for Commercial Units
TCL warrants Televisions that are used for any commercial or business
purposes as follows: all parts are warranted against material defects in
materials or workmanship that result in the Television failing for a period of
ninety (90) days after the date of original retail purchase. DURING THIS
PERIOD, TCL WILL, AT TCL'S OPTION, REPAIR OR REPLACE THE
DEFECTIVE PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU. ON-SITE SERVICE ONLY APPLIES WITHIN 100
KILOMETERS OF AN ASP. IF YOU ARE NOT WITHIN 100 KILOMETERS
OF AN ASP, YOU MUST DELIVER THE ENTIRE TELEVISION TO AN
ASP. YOU MUST PAY FOR ALL TRANSPORTATION AND INSURANCE
CHARGES FOR THE TELEVISION TO AND FROM THE ASP.
Rental Units
The warranty for Television rental units begins with the date of first rental
or thirty (30) days from the date of shipment to the rental firm, whichever
comes first.

Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING
CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this Television must be performed by an ASP.
(3) The warranties from TCL are effective only if the Television is (i)
purchased as new and unopened from TCL or from TCL’s authorized
distributors, dealers or resellers (“ADR’s”) and (ii) located/operated
in Canada.
(4) Labour charges for set installation, setup, adjustment of customer
controls, and installation or repair of antenna systems are not covered
by these warranties. Reception problems caused by inadequate
antenna systems are your responsibility.
(5) Warranties extend only to material defects in materials or
workmanship as limited above, and do not extend to:
a) Service, repairs or replacement made necessary by accident,
misuse, abuse, moisture, liquids, dust, dirt, neglect, accident,
damage, 24/7 applications, improper installation, improper
operation, improper cleaning, improper maintenance, normal
wear and tear, or any other external cause or event, act or
omission outside the control of TCL, including fire, theft, acts of
God, alteration, power failures, power surges or power shortages,
lightning, other electrical faults, or repairs, modifications or
replacements by persons other than those authorized by TCL to
service the Television;
b) Replacement of missing, discarded or lost parts, the provision of
retrofits, or preventive maintenance;
c) Repair of damage that is cosmetic only or does not affect the
Television functionality, such as wear and tear, scratches and
dents;
d) Service on Toshiba-branded accessory items (such accessory
items may be covered by their own warranty);
e) Service on third party products or service made necessary by
use of incompatible third party products;
f) Service made necessary by the simultaneous use of this
Television and connected equipment;
g) Modifications to the Television not approved in writing by TCL,
and service made necessary by the use or installation of nonToshiba modifications to the Television;
h) Service of a Television on which the TOSHIBA label or logo, rating
label or serial number have been defaced or removed;
i) On-site service and repair of the Television; and
j) Damage to the Television caused by failure to follow the
specifications, User manuals or guides as to usage and/or
storage.
Disclaimer and Limitation of Remedy
TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER EXPRESS
AND IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS
FOR THIS TELEVISION, INCLUDING THE IMPLIED WARRANTIES,
CONDITIONS AND REPRESENTATIONS OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED
AND EXCLUDED. IF THE APPLICABLE LAW, STATUTORY OR
OTHERWISE, PRECLUDES THE EXCLUSION OF ANY IMPLIED
WARRANTIES, CONDITIONS AND REPRESENTATIONS THEN SUCH
IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS ARE
OTHERWISE LIMITED IN DURATION TO THE TERM OF THIS
EXPRESS WRITTEN LIMITED WARRANTY. TO THE EXTENT NOT
PRECLUDED BY LAW, STATUTORY OR OTHERWISE, THIS WRITTEN
WARRANTY SUPERCEDES AND SPECIFICALLY DISCLAIMS ANY
OTHER WARRANTY, CONDITION OR REPRESENTATION NOT
STATED IN THIS WARRANTY, WHETHER MADE BY TCL, TOSHIBA
CORPORATION, THEIR AFFILIATES, ADRs AND ASPs AND
WHETHER MADE ORALLY OR IN WRITING (INCLUDING ANY
STATEMENT IN ANY BROCHURE, PRESS RELEASE,
ANNOUNCEMENT, ADVERTISEMENT, POINT OF SALE DISPLAY,
ETC.).

HM67 (E/F) Web 213:276

50HM67_EN.book Page 69 Wednesday, February 14, 2007 4:18 PM

Chapter 9: Appendix

YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE
INSTRUCTIONS IN THE APPLICABLE USER GUIDES AND/OR
MANUALS. IF YOU FAIL TO DO SO, THIS TELEVISION MAY NOT
FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE. THIS
WARRANTY WILL NOT COVER ANY SERVICE THAT IS REQUIRED, IN
PART OR IN WHOLE, AS A RESULT OF ANY FAILURE TO FOLLOW THE
SET-UP AND USAGE INSTRUCTIONS. THIS WARRANTY DOES NOT
APPLY AND SHALL BE VOID AND UNENFORCEABLE IF THE
TELEVISION IS OPENED, SERVICED, OR REPAIRED BY PERSONS
OTHER THAN THOSE AUTHORIZED BY TCL TO SERVICE OR REPAIR
THE TELEVISION.
IF THE TELEVISION FAILS TO WORK AS WARRANTED ABOVE, YOUR
SOLE AND EXCLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT
OF THE DEFECTIVE PART. IN NO EVENT WILL TCL, TOSHIBA
CORPORATION, THEIR AFFILIATES, ADRs OR ASPs (THE “RELATED
PARTIES”) BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY
DAMAGES, MONEY, REIMBURSEMENT, COSTS OR EXPENSES. THIS
LIMITATION APPLIES TO DAMAGES, MONEY, REIMBURSEMENT,
COSTS OR EXPENSES OF ANY KIND WHATSOEVER INCLUDING ANY
DIRECT OR INDIRECT DAMAGES, DAMAGE TO PROPERTY OR
PERSON, LOST PROFITS, LOST SAVINGS, INCONVENIENCE OR
OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL
DAMAGES, WHETHER FOR BREACH OF WARRANTY, BREACH OF
CONTRACT, TORT (INCLUDING NEGLIGENCE), UNDER A STATUTE OR
UNDER ANY OTHER LAW OR FORM OR ACTION, OR WHETHER
ARISING OUT OF THE USE OF OR INABILITY TO USE THE TELEVISION,
EVEN IF ANY OF THE RELATED PARTIES HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER
PARTY.

Critical Applications
The Television you have purchased is not designed for any “critical
applications.” “Critical applications” means life support systems, medical
applications, connections to implanted medical devices, commercial
transportation, nuclear facilities or systems or any other applications
where Television failure could lead to injury to persons or loss of life or
catastrophic property damage.
IF THE CUSTOMER USES THE TELEVISION IN ANY CRITICAL
APPLICATION, THE CUSTOMER - AND NOT TCL, ITS AFFILIATES, ADRs
OR ASPs - ASSUME SOLE AND FULL RESPONSIBILITY FOR SUCH USE.
TCL RESERVES THE RIGHT TO REFUSE TO SERVICE ANY TELEVISION
USED IN A CRITICAL APPLICATION. TCL, ITS AFFILIATES, ADRs AND
ASPs HEREBY DISCLAIM ANY AND ALL LIABILITY, DAMAGES AND
CONSEQUENCES ARISING OUT OF THE SERVICE OR REFUSAL TO
SERVICE SUCH TELEVISION AND FURTHER DISCLAIM ANY AND ALL
LIABILITY, CONSEQUENCES AND DAMAGES THAT MAY ARISE OR
RESULT FROM THE USE OF THE TELEVISION IN ANY CRITICAL
APPLICATIONS.
General Provisions
If and to the extent that any provision of this limited warranty should
generally be found to be unenforceable, the unenforceable provision shall
be severed from the warranty and deemed not to form part of the warranty.
The remaining provisions of this warranty shall be and remain valid and
enforceable. If and to the extent that any provision of this limited warranty
as it relates to any of the Related Parties is found to be invalid or
unenforceable in respect of that party (the “Excluded Party”), the
Excluded Party shall be deemed to be severed or excluded from the
provision, and the provision shall remain valid, enforceable and
applicable in respect of the other or remaining Related Parties.

No person, agent, distributor, dealer or company is authorized to change,
modify or extend the terms of these warranties in any manner whatsoever.

To the extent permitted by law, this limited warranty shall be governed and
construed in accordance with the laws of Ontario.

Arbitration and Dispute Resolution
To the extent not precluded by law, any claim, dispute, controversy or
disagreement (whether for breach of warranty, breach of contract, tort
(including negligence), under a statute or under any other law or form of
action) against any of the Related Parties arising out of, or otherwise
relating to: (i) this warranty; (ii) the Television; (iii) any oral or written
representations, statements, brochures, press releases, advertising,
announcement, point of sale display, or promotional material relating to the
Television; (iv) the relationships that result from this warranty, (the
foregoing claims, disputes controversies and disagreements are
collectively referred to as the “Dispute”), shall be referred to and resolved
by final and binding arbitration (to the exclusion of the courts). To the
extent not precluded by law, you agree to waive any right that you may
have to commence or participate in any representative or class proceeding
against the Related Parties relating to any Dispute. If and where applicable
and to the extent not precluded by law, you further agree to opt out of any
such representative or class proceedings. Arbitration of any Dispute will
be conducted in the forum and in the manner as agreed to between you
and TCL. Failing such agreement, the arbitration will be conducted by one
arbitrator pursuant to the laws and rules relating to arbitration generally in
force in the jurisdiction in which you reside at the time that the Dispute
arises. To the extent not precluded by law, no claim, dispute, controversy
or disagreement of any other person may be joined or combined with any
Dispute by you, without the prior written consent of TCL.

If there is any inconsistency between this limited warranty, on the one
hand, and any statement in the packaging of the Television or in any other
document enclosed with, or used in the context of the promotion or sale
of, the Television, on the other hand, the provisions of this limited warranty
shall prevail.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual and
checking the “Troubleshooting” section, you find that service is needed:
(1) To find the nearest ASP, visit TCL's web site at www.toshiba.ca, or
call toll free 1-800-268-3404
(2) Present your bill of sale or other proof of purchase to the ASP.
For additional information, visit TCL's website at www.toshiba.ca

HM67 (E/F) Web 213:276

50HM67_EN.book Page 70 Wednesday, February 14, 2007 4:18 PM

Chapter 9: Appendix

A copy of the GPL source code in this product may be obtained by
contacting Toshiba Consumer Solutions at (800)631-3811. There will be
a charge to cover the costs of providing the source code.
A copy of the LGPL source code in this product may be obtained by
contacting Toshiba Consumer Solutions at (800)631-3811. There will be
a charge to cover the costs of providing the source code.
USB Protocol Copyright © 2005 The NetBSD Foundation, Inc. All rights
reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
(1) Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
(2) Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
(3) Neither the name of The NetBSD Foundation nor the names of its
contributors may be used to endorse or promote products derived
from this software without specified prior written permission.
THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC.
AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
This product includes software developed by the OpenSSL Project for use
in the OpenSSL Toolkit (http://www.openssl.org).
This product includes cryptographic software written by Eric Young
(eay@cryptsoft.com).
OpenSSL 0.9.7d Copyright © 1998-2000 the OpenSSL Project. All Rights
reserved. Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following conditions
are met:
(1) Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
(2) Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
(3) All advertising materials mentioning features or use of this software
must display the following acknowledgement: This product includes
software developed by the OpenSSL Project for use in the OpenSSL
Toolkit (http://openssl.org).
(4) The names “OpenSSL Toolkit” and “Open SSL Project” must not be
used to endorse or promote products derived from this software
without prior written permission. For written permission, please
contact openssl-core@openssl.org.
(5) Products derived from this software may not be called “OpenSSL” nor
may “Open SSL” appear in their names without prior written
permission of the OpenSSL Project.
(6) Redistributions of any form whatsoever must retain the following
acknowledgement: “This product includes software developed by the
OpenSSL Project for use in the OpenSSL Toolkit (http://
www.openssl.org).”

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT “AS IS”
AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT
NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product
includes cryptographic software written by Eric Young
(eay@cryptsoft.com). This product includes software written by Tim
Hudson (tjh@cryptsoft.com).
Copyright © 1995-1998 Eric Young (eay@cryptsoft.com). All Rights
reserved. This package is an SSL implementation written by Eric Young
(eay@cryptsoft.com). The implementation was written so as to conform
with Netscapes SSL. This library is free for commercial and noncommercial use so long as the following conditions are adhered to. The
following conditions apply to all code found in this distribution, be it the
RC4, RSA, Ihash, DES, etc., code; not just the SSL code. The SSL
documentation included with this distribution is covered by the same
copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com).
Copyright remains Eric Young’s, and as such any Copyright notices in
the code are not to be removed. If this package is used in a product, Eric
Young should be given attribution as the author of the parts of the library
used. This can be in the form of a textual message at program startup
or in documentation (online or textual) provided with the package.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
(1) Redistributions of source code must retain the copyright notice, this
list of conditions and the following disclaimer.
(2) Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
(3) All advertising materials mentioning features or use of this software
must display the following acknowledgement: “This product includes
cryptographic software written by Eric Young (eay@cryptsoft.com).”
The word ‘cryptographic’ can be left out if the routines from the library
being used are not cryptographic related.
(4) If you include any Windows specific code (or derivative thereof) from
the apps directory (application code) you must include an
acknowledgement: “This product includes software written by Tim
Hudson (tjh@cryptosoft.com).”
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE. The license and distribution terms for any publicly available
version or derivative of this code cannot be changed, i.e. this code cannot
simply be copied and put under another distribution license (including the
GNU Public License).

HM67 (E/F) Web 213:276

50HM67_EN.book Page 71 Wednesday, February 14, 2007 4:18 PM

Index
A

Antenna cable ................................ 13
Antenna input configuration ............ 31
Audio quality adjustments ............... 47
Audio system connection ................ 20
Auto aspect .................................... 43
Auto power off ................................ 55

Game Mode feature ........................ 59

RECALL button ...............................55
Remote control
Battery installation ....................22
Device code table.....................27
Effective range .........................22
Functional key chart .................25
Learning about the buttons .......23
Programming ...........................26

B
Back of the TV................................ 12
Base closed captions ...................... 45
Blocking channels .......................... 51

C
Cable box connection ..................... 15
CableClear® ..................................... 58
Camcorder connection .................... 18
CH Bb buttons ........................ 23, 40
CH RTN button ......................... 23, 40
Channel Browser Setup .................. 38
Channel Browser™ ........................... 38
Channel labeling ............................ 33
Channel Number buttons .......... 23, 40
Channel programming
Automatic programming ........... 32
Manually adding and deleting ... 32
Cinema mode ................................. 43
Closed captions .............................. 45
Color temperature .......................... 57
ColorStream® ................................... 16
Component video ........................... 16
Component video cables ................ 13
Connecting cables .......................... 13

D
Digital Audio Out ............................ 20
Digital audio selector ...................... 46
Digital CC Settings ......................... 45
Digital signal meter ......................... 35
Dolby Digital ................................... 20
Dolby Digital Dynamic Range
Control....................................... 48
DVD player connection ................... 16
DVI connection ............................... 19
Dynamic contrast............................ 56

F
Features, TV .................................... 9
Front of the TV ............................... 11

H
HDMI audio mode ........................... 34
HDMI cable .................................... 13
HDMI™ connection .......................... 19

I
INFO button.................................... 55
INPUT button.................................. 37
Installation, care, and service ............ 3
Installation, setup ............................ 10
Integrated digital tuning ..................... 9
IR blaster........................................ 17
IR OUT connection ......................... 17

L
Labeling video input ........................ 37
Lamp mode .................................... 57
Lamp unit replacement.................... 63
Language selection ......................... 31
Last mode memory feature ............. 55
LED indications.........................11, 62
LOCKS menu
Channels, blocking................... 51
Enable rating blocking .............. 50
New PIN code.......................... 49
Panel lock ................................ 53
Unlocking programs
temporarily ................. 52
Video inputs, locking ................ 52

Reset Factory Defaults ....................36

S
Safety ...............................................2
SAP sound .....................................47
Satellite receiver connection ............16
Scroll settings .................................42
Selecting Menu Language ...............31
Service .............................................4
Side panel control ...........................11
Sleep timer .....................................54
Specifications .................................66
StableSound®................................... 48
Stereo sound ..................................47
SurfLock™ ........................................ 40
S-video cable ..................................13
System status .................................36

T
TheaterWide® picture size ...............41
Troubleshooting ..............................60
TV status information ......................55

Locks menu .................................... 49

V-Chip blocking (Locks menu) .........49
VCR connection ................. 14, 15, 16
Video cables ...................................13
Video input label .............................37
Video input lock ..............................52

MPEG noise reduction .................... 58
MTS feature ................................... 47
MUTE button .................................. 46

O
Optical audio cable ......................... 13
Optical audio output format ............. 48

P
PC Audio ........................................ 54
PC connection ................................ 21
PC settings ..................................... 53
Picture adjustment .......................... 44
Picture mode .................................. 44
Picture quality ................................. 44
Picture scroll ................................... 42
Picture size selection ...................... 41
POWER button .........................11, 23
Power-On Mode ............................. 35

W
Warranty
Canada ....................................68
U.S. .........................................67
WOW:SRS 3D ................................59
WOW:SRS Focus ...........................59
WOW:SRS TruBass ........................59

HM67 (E/F) Web 213:276

50HM67_EN.book Page 72 Wednesday, February 14, 2007 4:18 PM

Notes

HM67 (E/F) Web 213:276

50HM67_EN.book Page 73 Wednesday, February 14, 2007 4:18 PM

Notes

HM67 (E/F) Web 213:276

50HM67_EN.book Page 74 Wednesday, February 14, 2007 4:18 PM

Corporate Headquarters: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A.
NATIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A.

HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA – TEL: (905) 470-5400
SERVICE CENTERS:
TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA – TEL: (905) 470- 5400
MONTREAL: 18050 TRANS CANADA, KIRKLAND, QUEBEC, H9J 4A1, CANADA – TEL: (514) 390-7766
VANCOUVER: 13551 COMMERCE PARKWAY, SUITE 110, RICHMOND, B.C., V6V 2L1, CANADA – TEL: (604) 303-2500
MANUFACTURED BY

CableClear, ColorStream, StableSound, and TheaterWide are registered trademarks of Toshiba America Consumer Products, L.L.C.
Channel Browser and SurfLock are trademarks of Toshiba America Consumer Products, L.L.C.
DLP® and the DLP logo are registered trademarks of Texas Instruments.

PRINTED IN USA
(07-03)

HM67 (E/F) Web 213:276

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Trapped                         : False
Producer                        : Acrobat Distiller 7.0.5 (Windows)
GTS PDFX Conformance            : PDF/X-1a:2001
GTS PDFX Version                : PDF/X-1:2001
Create Date                     : 2007:02:14 16:22:32+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:02:19 08:07:34-06:00
Metadata Date                   : 2007:02:19 08:07:34-06:00
Format                          : application/pdf
Creator                         : .
Title                           : 
Document ID                     : uuid:04ec6184-f1b6-412f-897a-3a3efc5f7a5c
Instance ID                     : uuid:7a2a3a9a-58cb-47a5-9657-632afaa5c176
Page Count                      : 74

EXIF Metadata provided by EXIF.tools

65HM167 50HM67 OM E

Navigation menu

Versions of this User Manual:

Views

Navigation