Manual For The 63054 10 Ft. X 20 Portable Car Canopy
User Manual: Manual for the 63054 10 Ft. x 20 Ft. Portable Car Canopy 10 Ft. x 20 Ft. Portable Car Canopy
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
Owner’s Manual & Safety Instructions SaveThis ThisManual ManualKeep Keep this manual for the safety warnings and precautions, assembly, Save this manual for the safety warnings and precautions, assembly, operating, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual back of the manual near the assembly diagram (or month and year of purchase if product has no number). near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and Keep this manual and the receipt in a safe and dry place for future reference. the receipt in a safe and dry place for future reference. REV 15i US Patent No.: US 6,994,099 B2 Vehicle not included. Visit our website at: http://www.harborfreight.com Email our technical support at: productsupport@harborfreight.com When When unpacking, unpacking, make make sure sure that that the the product product is is intact intact and undamaged. If any parts are missing or broken, and undamaged. If any parts are missing or broken, please please call call 1-888-866-5797 1-888-866-5797 as as soon soon as as possible. possible. © ® Copyright Copyright© 2015 2015 by by Harbor Harbor Freight Freight Tools Tools®.. All All rights rights reserved. reserved. No portion of this manual or any artwork contained No portion of this manual or any artwork contained herein herein may may be be reproduced reproduced in in any shape or form without the express written consent of Harbor Freight any shape or form without the express written consent of Harbor Freight Tools. Tools. Diagrams Diagrams within within this this manual manual may may not not be be drawn drawn proportionally. proportionally. Due Due to to continuing continuing improvements, improvements, actual actual product product may may differ differ slightly slightly from from the the product product described described herein. herein. Tools Tools required required for for assembly assembly and and service service may may not not be be included. included. Read this this material material before before using using this this product. product. Read Failure to do so can result in serious injury. Failure to do so can result in serious injury. SAVE THIS MANUAL. SAVE THIS MANUAL. Table of Contents Safety.......................................................... 2 Specifications.............................................. 4 Assembly..................................................... 4 Maintenance................................................ 6 Parts List..................................................... 7 Warranty...................................................... 8 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Page 2 WARNING marking concerning Risk of Eye Injury. Wear ANSI‑approved safety goggles with side shields. WARNING marking concerning Risk of Head Injury. Wear hard hat during assembly and service. Read the manual before set-up and/or use. WARNING marking concerning Risk of Hand Injury. Wear heavy-duty work gloves during assembly and service. For technical questions, please call 1-888-866-5797. Item 63054 Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Assembly Precautions 2. Assemble and install only on flat, level, hard surface. 3. Assemble and anchor only according to these instructions. Improper assembly or inadequate anchoring can create hazards. 4. Check for utility lines, tree branches and other structures before assembling. 5. Verify that installation surface has no hidden utility lines before anchoring. 6. Wear ANSI-approved safety goggles, heavy-duty work gloves and hard hat during assembly and service. 7. Keep assembly area clean and well lit. 8. Keep bystanders out of the area during assembly. 9. Do not assemble when tired or when under the influence of drugs or medication. 10. Product capabilities apply to properly and completely assembled product only. Use Precautions 1. DO NOT USE IN HIGH WIND. Disassemble and store if harsh weather or heavy rain threatens. 2. For temporary use only. Do not use for long-term shelter. 3. Do not use as tent. Does not meet tent flammability standards. Do not use grill, heater, or ignition sources inside or near cover. 4. Do not allow snow, rainwater or debris to accumulate or pool on roof. 5. Do not hang objects from any part of the Canopy. 7. Use as intended only. 8. Inspect regularly, tighten all loose hardware and loose ropes, and secure all loosened anchors. If any parts are damaged, bent, or stretched, they must be replaced. Hardware may loosen during normal operation stresses. Loose hardware or damaged/altered parts will compromise the structural integrity of this product. ASSEMBLY 1. Do not assemble in windy conditions. SAFETY IMPORTANT SAFETY INFORMATION 9. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 6. This product is not a toy. Do not allow children to play with or near this item. Item 63054 For technical questions, please call 1-888-866-5797. MAINTENANCE SAVE THESE INSTRUCTIONS. Page 3 Specifications Overall Dimensions Center Height Side Height Pole Diameter 10′ W x 20′ L 9′ 6" 6′ 3" 1.34" SAFETY Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY: Do not leave this product partially assembled. Assemble this product completely at one time. Note: At least 2 workers are required for assembly. Before starting assembly, review the instructions and make sure there is enough time and the proper tools available to properly assemble. Make sure all parts seat completely and securely. Assemble on a flat, level surface. 1. Lay out six Straight Poles (1), eighteen Swaged Poles (2), six Rafter Poles (3), six 3‑Way Connectors (4), and three 4‑Way Connectors (5). 4 2 1 2 5 2 1 2 4 ASSEMBLY 3 3 3 2 2 2 4 2 1 2 5 2 1 2 4 2 2 2 3 3 3 4 2 1 2 5 2 1 2 4 Figure A: Roof Layout MAINTENANCE 2. Connect all parts, making sure that crimped tubes insert into plain ends as far as they will go. Crimped tubes insert into plain ends. Figure B: Roof Assembly Page 4 For technical questions, please call 1-888-866-5797. Item 63054 3. Attach a Leg Pole (6) to each of the six remaining Swaged Poles (2), and add a Foot Plate (7), making sure the holes in the sides of the Poles are at the top. 7. On each corner, wrap the roof rope around the pole several times until all slack is taken up, then secure the S-Hook in the hole. 4. Starting on one side, insert the Straight Poles into the Connectors. Repeat on the other side. SAFETY Connector Hole 6 2 Roof Rope Foot Plate (7) S-Hook Figure C 5. Place the Cover (8) on top of the roof. Figure F ASSEMBLY 8. WARNING! Verify that installation surface has no hidden utility lines before driving Spike Anchors. 9. Cut the Guy Rope (10) into 4 equal lengths. 10. Drive a Spike Anchor (11) about 3 feet away from each corner, angled inward. 11. On each corner: a. Tie one end of the Guy Rope securely to the 3-Way Connector. 6. Secure the Cover to the roof by putting the ends of the Bungee Cords through the eyelets, around the Pole, and over the balls. Ball Bungee Cord Guy Rope Pole Spike Anchor Eyelet Figure E Figure G WARNING! The Cover must be installed and anchored. The Cover, Guy Ropes and Spike Anchors do not only anchor the Canopy, they also hold it together. Item 63054 For technical questions, please call 1-888-866-5797. Page 5 MAINTENANCE Figure D b. Thread the other end of the Guy Rope through the loop on the Spike Anchor, take up all slack, then tie a secure knot while under tension. Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician. SAFETY TO PREVENT SERIOUS INJURY FROM PRODUCT FAILURE: Do not use damaged products. If damage is noted, have the problem corrected before further use. Inspection MONTHLY, inspect the general condition of the Canopy. Check for: • loose spike anchors, pole connections, or bungee cords (tighten as needed), • torn or frayed roof or ropes, • cracked, bent, or broken parts, and • any other condition that may affect its safe operation. Cleaning 1. Immediately remove any accumulated debris from the roof with a broom, mop, or other soft-sided instrument from the outside. DO NOT use sharp instruments. 2. PERIODICALLY, clean roof with mild soap and water. DO NOT use bleach or harsh abrasive products. ASSEMBLY MAINTENANCE Page 6 For technical questions, please call 1-888-866-5797. Item 63054 Parts List THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SAFETY PLEASE READ THE FOLLOWING CAREFULLY Parts List Note: Individual part illustrations not to scale. Illustration Qty 1 Straight Pole 40" 6 2 Swaged Rafter 40-3/4" 24 3 Rafter 24-5/8" 6 4 3-Way Connector 6 5 4-Way Connector 3 6 Leg Pole 39" 6 7 Foot Plate 6 8 Cover 1 9 Ball Bungee Cord 24 10 Guy Rope 40' 1 11 Spike Anchor 4 ASSEMBLY Description MAINTENANCE Part Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Item 63054 For technical questions, please call 1-888-866-5797. Page 7 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42 Instance ID : uuid:f262c204-6045-ff42-ba61-89341b68def3 Original Document ID : adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Document ID : xmp.id:da20f794-c3d6-4b3b-9f10-f19dc3337d04 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:bc8a2c49-ca9c-441f-89e2-feac5d17a049 Derived From Document ID : xmp.did:bc8a2c49-ca9c-441f-89e2-feac5d17a049 Derived From Original Document ID: adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2015:09:09 14:05:08-07:00 Create Date : 2015:09:09 14:05:08-07:00 Modify Date : 2015:09:09 14:05:10-07:00 Metadata Date : 2015:09:09 14:05:10-07:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Export Script : Export pdf script v3.82 Format : application/pdf Rights : Copyright©2015 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Subject : 02.01.01.01 Web Statement : http://www.harborfreight.com Marked : True Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 8 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools