Manual For The 63054 10 Ft. X 20 Portable Car Canopy

User Manual: Manual for the 63054 10 Ft. x 20 Ft. Portable Car Canopy 10 Ft. x 20 Ft. Portable Car Canopy

Open the PDF directly: View PDF PDF.
Page Count: 8

Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2015 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Owner’s Manual & Safety Instructions
Vehicle not included.
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
US Patent No.: US 6,994,099 B2
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2015 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15i
Page 2 For technical questions, please call 1-888-866-5797. Item 63054
Table of Contents
Safety ......................................................... 2
Specifications ............................................. 4
Assembly .................................................... 4
Maintenance ............................................... 6
Parts List..................................................... 7
Warranty ..................................................... 8
WARNING SYMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Read the manual before
set-up and/or use.
WARNING marking concerning
Risk of Head Injury. Wear hard hat
during assembly and service.
WARNING marking concerning Risk
of Hand Injury. Wear heavy-duty work
gloves during assembly and service.
Page 3For technical questions, please call 1-888-866-5797.Item 63054
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense
and caution are factors which cannot be built into this product, but must be supplied by the operator.
Assembly Precautions
1. Do not assemble in windy conditions.
2. Assemble and install only on
flat, level, hard surface.
3. Assemble and anchor only according to
these instructions. Improper assembly or
inadequate anchoring can create hazards.
4. Check for utility lines, tree branches and
other structures before assembling.
5. Verify that installation surface has no
hidden utility lines before anchoring.
6. Wear ANSI-approved safety goggles,
heavy-duty work gloves and hard hat
during assembly and service.
7. Keep assembly area clean and well lit.
8. Keep bystanders out of the area during assembly.
9. Do not assemble when tired or when under
the influence of drugs or medication.
10. Product capabilities apply to properly and
completely assembled product only.
Use Precautions
1. DO NOT USE IN HIGH WIND. Disassemble and
store if harsh weather or heavy rain threatens.
2. For temporary use only.
Do not use for long-term shelter.
3. Do not use as tent. Does not meet tent
flammability standards. Do not use grill, heater,
or ignition sources inside or near cover.
4. Do not allow snow, rainwater or debris
to accumulate or pool on roof.
5. Do not hang objects from any part of the Canopy.
6. This product is not a toy. Do not allow
children to play with or near this item.
7. Use as intended only.
8. Inspect regularly, tighten all loose hardware and
loose ropes, and secure all loosened anchors.
If any parts are damaged, bent, or stretched, they
must be replaced. Hardware may loosen during
normal operation stresses. Loose hardware
or damaged/altered parts will compromise
the structural integrity of this product.
9. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
SAVE THESE INSTRUCTIONS.
SAFETYMAINTENANCE ASSEMBLY
Page 4 For technical questions, please call 1-888-866-5797. Item 63054
Specifications
Overall Dimensions 10′ W x 20′ L
Center Height 9′ 6"
Side Height 6′ 3"
Pole Diameter 1.34"
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
TO PREVENT SERIOUS INJURY:
Do not leave this product partially assembled. Assemble this product completely at one time.
Note: At least 2 workers are required for assembly. Before starting assembly, review the instructions and make sure
there is enough time and the proper tools available to properly assemble.
Make sure all parts seat completely and securely. Assemble on a flat, level surface.
1. Lay out six Straight Poles (1), eighteen Swaged Poles (2), six Rafter Poles (3),
six 3-Way Connectors (4), and three 4-Way Connectors (5).
2 2
2
2 2
3 3 3
3 3 3
1 1
44
44
4 45
5
5
11
1 1
2
2
2
2
22
2
2
2 22
22
Figure A: Roof Layout
2. Connect all parts, making sure that crimped tubes insert into plain ends as far as they will go.
Crimped tubes
insert into
plain ends.
Figure B: Roof Assembly
SAFETY MAINTENANCE
ASSEMBLY
Page 5For technical questions, please call 1-888-866-5797.Item 63054
3. Attach a Leg Pole (6) to each of the six remaining
Swaged Poles (2), and add a Foot Plate (7), making
sure the holes in the sides of the Poles are at the top.
4. Starting on one side, insert the Straight Poles
into the Connectors. Repeat on the other side.
6
Connector
Foot Plate
(7)
Hole
Figure C
5. Place the Cover (8) on top of the roof.
Figure D
6. Secure the Cover to the roof by putting the
ends of the Bungee Cords through the eyelets,
around the Pole, and over the balls.
Ball
Bungee
Cord
Eyelet
Pole
Figure E
7. On each corner, wrap the roof rope around
the pole several times until all slack is taken
up, then secure the S-Hook in the hole.
Roof
Rope
S-Hook
Figure F
8. WARNING! Verify that installation surface has no
hidden utility lines before driving Spike Anchors.
9. Cut the Guy Rope (10) into 4 equal lengths.
10. Drive a Spike Anchor (11) about 3 feet
away from each corner, angled inward.
11. On each corner:
a. Tie one end of the Guy Rope securely
to the 3-Way Connector.
b. Thread the other end of the Guy Rope through
the loop on the Spike Anchor, take up all slack,
then tie a secure knot while under tension.
Guy
Rope
Spike
Anchor
Figure G
WARNING! The Cover must be installed and
anchored. The Cover, Guy Ropes and Spike Anchors do
not only anchor the Canopy, they also hold it together.
2
SAFETYMAINTENANCE ASSEMBLY
Page 6 For technical questions, please call 1-888-866-5797. Item 63054
Maintenance
Procedures not specifically explained in this manual must
be performed only by a qualified technician.
TO PREVENT SERIOUS INJURY FROM PRODUCT FAILURE:
Do not use damaged products. If damage is noted, have the problem corrected before further use.
Inspection
MONTHLY, inspect the general condition of the Canopy. Check for:
• loose spike anchors, pole connections, or bungee cords (tighten as needed),
• torn or frayed roof or ropes,
• cracked, bent, or broken parts, and
• any other condition that may affect its safe operation.
Cleaning
1. Immediately remove any accumulated debris from the
roof with a broom, mop, or other soft-sided instrument
from the outside. DO NOT use sharp instruments.
2. PERIODICALLY, clean roof with mild soap and water.
DO NOT use bleach or harsh abrasive products.
SAFETY MAINTENANCE
ASSEMBLY
Page 7For technical questions, please call 1-888-866-5797.Item 63054
Parts List
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Parts List
Note: Individual part illustrations not to scale.
Part Description Illustration Qty
1Straight Pole 40" 6
2 Swaged Rafter 40-3/4" 24
3 Rafter 24-5/8" 6
4 3-Way Connector 6
5 4-Way Connector 3
6Leg Pole 39" 6
7 Foot Plate 6
8 Cover 1
9 Ball Bungee Cord 24
10 Guy Rope 40' 1
11 Spike Anchor 4
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
SAFETYMAINTENANCE ASSEMBLY
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Navigation menu