Manual For The 63269 Drain Cleaner Replacement Cable And Cutter Set
User Manual: Manual for the 63269 Drain Cleaner Replacement Cable and Cutter Set Drain Cleaner Replacement Cable and Cutter Set
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. REV 16h Visit Visit our our website website at: at: http://www.harborfreight.com http://www.harborfreight.com Email our technical support Email our technical support at: at: productsupport@harborfreight.com productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible. Copyright© 2016 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. IMPORTANT SAFETY INFORMATION Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles and rubber gloves during assembly. 3. Keep assembly area clean and well lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble when tired or when under the influence of alcohol, drugs or medication. Use Precautions 1. This product is not a toy. Do not allow children to play with or near this item. 3. Inspect before every use; do not use if parts are loose or damaged. 2. Use as intended only. Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Manual-Feed Drain Cleaner 1. Unplug Drain Cleaner from outlet. 2. Remove old Cable by pulling Cable completely out of Drum. Cable 3. Remove old Cable from Drum‑Connecting Cable. 4. Connect new Cable to Drum-Connecting Cable. 5. Feed new Cable into Drum. Drum-Connecting Cable Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Page 2 For technical questions, please call 1-888-866-5797. Item 63269 Power-Feed Drain Cleaner 1. Unplug Drain Cleaner from outlet. 2. Pull out approximately 1 foot of old Cable. Remove Screw and Washer from end of Cable. 4. Move Power-Feed Lever so that Shear Pin/Roller lines up with groove in shaft. Remove Shear Pin/Roller by lifting up through Groove. 3. Remove Tension Knob by turning counterclockwise. Remove Spring. 5. Remove Nut, Washer and Knob. Lift Power-Feed Assembly off unit. 6. Remove old Cable from Power-Feed Assembly. Tension Knob Groove Power-Feed Lever Shear Pin/ Roller Spring (not shown) Power-Feed Assembly Knob Nut and Washer 7. Remove old Cable by pulling Cable completely out of Drum. Cable 8. Remove old Cable from Drum‑Connecting Cable. 9. Remove Screw and Washer from end of new Cable. 10. Insert new Cable through Power-Feed Assembly. 11. Replace Washer and Screw to end of new Cable. 12. Connect new Cable to Drum-Connecting Cable. 13. Reattach Power-Feed Assembly. 14. Reassemble Power-Feed Assembly. 15. Power-Feed new cable into Drum according to Drain Cleaner’s instruction manual. Drum-Connecting Cable Cutters Refer to Drain Cleaner’s instruction manual for assembly and use. Item 63269 For technical questions, please call 1-888-866-5797. Page 3 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c123 79.158978, 2016/02/13-01:11:19 Instance ID : uuid:8659a59d-b076-fc4a-9800-d101cea33800 Original Document ID : adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Document ID : xmp.id:d601ca4c-d1dc-48ae-869e-5e264453bb93 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:ebf267b7-094d-48e8-be0c-93307de82f46 Derived From Document ID : xmp.did:966331cf-395c-46af-93d9-75c7a9413514 Derived From Original Document ID: adobe:docid:indd:2947f79c-bab0-11df-a4dc-d1b6dbadcc65 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Macintosh) History Changed : / History When : 2016:08:01 08:52:01-07:00 Create Date : 2016:08:01 08:52:01-07:00 Modify Date : 2016:08:01 08:52:05-07:00 Metadata Date : 2016:08:01 08:52:05-07:00 Creator Tool : Adobe InDesign CC 2015 (Macintosh) Export Script : Export pdf script v3.82 Format : application/pdf Rights : Copyright© 2016 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Marked : True Web Statement : http://www.harborfreight.com Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CC 2015 (Macintosh)EXIF Metadata provided by EXIF.tools