Manual For The 63269 Drain Cleaner Replacement Cable And Cutter Set

User Manual: Manual for the 63269 Drain Cleaner Replacement Cable and Cutter Set Drain Cleaner Replacement Cable and Cutter Set

Open the PDF directly: View PDF PDF.
Page Count: 4

Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Visit our website at: http://www.harborfreight.com
Email our technical support at: productsupport@harborfreight.com
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2016 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 16h
Page 2 For technical questions, please call 1-888-866-5797. Item 63269
IMPORTANT SAFETY INFORMATION
Assembly Precautions
1. Assemble only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
rubber gloves during assembly.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use
if parts are loose or damaged.
Assembly Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
Manual-Feed Drain Cleaner
1. Unplug Drain Cleaner from outlet.
2. Remove old Cable by pulling Cable
completely out of Drum.
3. Remove old Cable from Drum-Connecting Cable.
4. Connect new Cable to Drum-Connecting Cable.
5. Feed new Cable into Drum.
Cable
Drum-Connecting
Cable
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Page 3For technical questions, please call 1-888-866-5797.Item 63269
Power-Feed Drain Cleaner
1. Unplug Drain Cleaner from outlet.
2. Pull out approximately 1 foot of old Cable.
Remove Screw and Washer from end of Cable.
3. Remove Tension Knob by turning
counterclockwise. Remove Spring.
4. Move Power-Feed Lever so that
Shear Pin/Roller lines up with groove
in shaft. Remove Shear Pin/Roller
by lifting up through Groove.
5. Remove Nut, Washer and Knob. Lift
Power-Feed Assembly off unit.
6. Remove old Cable from Power-Feed Assembly.
Tension
Knob
Power-Feed
Lever
Shear Pin/
Roller
Knob
Spring
(not shown)
Nut and
Washer
Power-Feed
Assembly
Groove
7. Remove old Cable by pulling Cable
completely out of Drum.
8. Remove old Cable from Drum-Connecting Cable.
9. Remove Screw and Washer from end of new Cable.
10. Insert new Cable through Power-Feed Assembly.
11. Replace Washer and Screw to end of new Cable.
12. Connect new Cable to Drum-Connecting Cable.
13. Reattach Power-Feed Assembly.
14. Reassemble Power-Feed Assembly.
15. Power-Feed new cable into Drum according
to Drain Cleaner’s instruction manual.
Cable
Drum-Connecting
Cable
Cutters
Refer to Drain Cleaner’s instruction manual for assembly and use.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Navigation menu