Manuale_Tecnico_posto_interno_MINI_Art.6701_Art.6700_3ED_EN_cod.2G40001629 6701W Technical Manual

6701W-tech-manual 6701W-tech-manual

User Manual: 6701W technical manual

Open the PDF directly: View PDF .
Page Count: 24

TECHNICAL

MANUAL

Mini

art. 6701- art. 6700 Passion.Technology.Design.

Table of contents

Warning ............................................................................................ 2

Monitor description ......................................................................... 3

Soft-touch keys description .................................................................... 4

Indicator LED description........................................................................4

Installation ........................................................................................ 5

Removing / Fitting the terminal ..............................................................6

Fitting upgrade KIT Art. 6733W ............................................................... 6

Monitor conﬁguration ..................................................................... 7

Standard conﬁguration for soft-touch keys ..........................................7

Advanced monitor conﬁguration ............................................................8

Warning ............................................................................................... 8

Programming for intercom call ............................................................8

Programming/deleting intercom address

(selective intercom only) ..............................................................8

Programming buttons for intercom call .......................................9

Direct programming of intercom call .........................................10

Programming keys for generic or coded actuator ............................11

Programming buttons for other functions ......................................... 12

Programming range ..........................................................................13

Monitor ringtone selection ................................................................13

Programming reset ...........................................................................14

Riser addresses ............................................................................. 15

Operating distances with Art. 4888C ........................................... 16

Wiring diagrams with Art. 4888C ................................................. 17

System with Art. 4888C: 1 Ikall series external unit ............................17

System with Art. 4888C: 2 main monitors in cascade connection ....18

System with Art. 4888C: 2 main monitors

and 1 secondary monitor in branch connection .................................18

System with Art. 4888C: 2 main monitors

and 1 secondary monitor in cascade connection ............................... 18

Operating distances with KIT 8461M-MB ................................... 19

Operating distances with Art. 1210 .............................................. 20

Wiring diagrams with KIT 8461M-MB and Art.1210 ................... 21

KIT 8461M-MB: standard single-family system ..................................21

System with Art. 1210 ............................................................................21

KIT 8461M-MB or system with Art. 1210:

secondary monitor in branch connection ............................................ 22

KIT 8461M-MB or system with Art. 1210:

2 additional secondary monitors in cascade connection ..................22

Floor door call connection variant ............................................... 22

Warning

Intended use

This Comelit product was designed for use in the creation of audio and video communication systems in residential,

commercial or industrial settings and in public buildings or buildings used by the public.

Installation

All activities connected to the installation of Comelit products must be carried out by qualiﬁed technical personnel, with

careful observation of the indications provided in the Manuals / Instruction sheets supplied with those products.

Wires

Cut o the power supply before carrying out any maintenance procedures.

Use wires with a cross-section suited to the distances involved, observing the instructions provided in the system

manual.

We advise against running the system wires through the same duct as the power cables (230V or higher).

Safe usage

To ensure Comelit products are used safely:

• carefully observe the indications provided in the Manuals / Instruction sheets

• make sure the system created using Comelit products has not been tampered with / damaged.

Maintenance

Comelit products do not require maintenance aside from routine cleaning, which should be carried out in accordance

with the indications provided in the Manuals / Instruction sheets.

Any repair work must be carried out

• for the products themselves, exclusively by Comelit Group S.p.A.,

• for systems, by qualiﬁed technical personnel.

Disclaimer

Comelit Group S.p.A. does not assume any responsibility for

• any usage other than the intended use

• non-observance of the indications and warnings contained in this Manual / Instruction sheet.

Comelit Group S.p.A. nonetheless reserves the right to change the information provided in this Manual / Instruction

sheet at any time and without prior notice.

Monitor description

LL CFP1 CFP2

1. Brightness control

fTo increase the value, turn clockwise

2. Colour intensity adjustment for Art. 6701

Contrast adjustment for B/W monitor Art. 6700

fTo increase the value, turn clockwise

3. 4.3’’ LCD screen (in colour for Art. 6701, B/W for Art. 6700)

4. Call volume adjustment (high - medium - low)

5. Soft-touch keys

6. Monitor handset (lift handset to start communication)

7. S1 User code programming microswitches (see table on page. 15)

8. S2 Button and function programming microswitches (marked with a red corner)

DIP 1-2-3-4 for button function programming

DIP 5-6 access to programming

DIP 7 for power supply voltage management (see diagrams and variants on page 17), default = OFF

9. Loudspeaker volume adjustment (for setting intercom audio only)

10. CV5 Video closing jumper

11. Pin for securing terminal block

12. Space for housing the operation accessory for keys (standard on all black monitors, available to purchase

separately for white monitors Art. 6733W)

Terminal block for system connection

LL Bus line connection terminals

CFP1 CFP2 Floor door call input

For systems with 2-wire KIT or Art. 1210, set DIP 7 to ON.

A maximum of 1 main monitor can be set in systems with 2-WIRE KIT or Art. 1210, and 2 main monitors in systems

with Art. 4888C.

DIP 8:

ON secondary monitor

OFF main monitor (default)

Soft-touch keys description

Indicator LED description

fPress the desired key once to activate the function associated with it

Lock-release LED

slow flashing: door open;

1 flash after pressing: door opening conﬁrmation;

continuous flashing: call in progress.

Privacy LED (red)

steady: privacy function enabled

3 flashes (every 5 sec.): doctor function enabled

continuous flashing: device in programming mode

4 flashes: system engaged

Lock-release key

Key 1 Actuator function (programmable)

Key 2 Self-ignition function (programmable)

Privacy key

Keys (programmable) present as standard on all black monitors (for white monitors the KIT with additional buttons Art.

6733W is available to purchase separately)

Wait for approximately 1 sec. before pressing the same key again. Pressing the same key several times in quick

succession will cancel the command.

The monitor Art. 3701/6700 is designed for use in colour systems, in the SB2 section downstream of Art. 4888C, or

in systems without mixer, such as the system with 2-wire KIT or Art. 1210.

Installation

optional

fixing

16,0 cm

17,5 cm

1C1B1A

6 7

CLACK!

Removing / Fitting the terminal

L L C

(to remove)

CLACK!

8 97

LL CFP1 CFP2

Fitting upgrade KIT Art. 6733W

Standard conﬁguration for DIP switches 1-2-3-4

Monitor conﬁguration

Standard conﬁguration for soft-touch keys

DIP S2 Art. (6700W / 6700W/BM / 6701W / 6701W/BM ) + Art. 6733W /

Art. 6701B / 6701B/BM

DIP 1 DIP 2 DIP 3 DIP 4 P1 P2 P3 P4 P5 P6

0000ACT AI CCS D PAN K

1000CCS AI INT INTb D ACT

0100INT AI INTb ACT CCS CCP

1100ACT CCS CCP PAN K D

0010ACT ACT ACT ACT ACT ACT ACT

1010INT ACT CCS CCP INTb PAN

0110AI D K CCS CCP INTb

1110INTb INT AI INT PAN D

0001CCS PAN D AI INT INTb

1001 K CCS PAN CCP AI INT

0101CCP K PAN ACT INT AI

1101PAN CCP CCS K ACT D

0011INTb AI INT ACT D CCS

1011INT INT INT INT INT INT

0111NULL NULL NULL NULL NULL NULL NULL

1111 PROG

Legend

Lock- release

ACT Actuator

AI Self-ignition

CCP Main switchboard call – not for use in systems with KIT

CCS Secondary switchboard call – not for use in systems with KIT

K Guardian doorentry phone call

D Doctor

PAN Panic – not for use in systems with KIT

INT Programmable intercom, general or selective - standard singlefamily calling for KIT and Simplebus Top

INTb Two-family intercom - for KIT only

NULL No function

PROG

Programmed functions, see pages 8-12.

In this Dip switch setting, the buttons control the programmed functions; the NON-programmed buttons

control functions referred to on line 0000 (default).

If the default settings (see table on page 7) do not reﬂect requirements, the keys can be programmed dierently by carrying

out the steps below.

At the end, set S2 DIP switches 1-2-3-4 to the combination 1111 (PROG setting in the configuration tables on pages

8-12). In this dip switch setting, the keys control the programmed functions; the NON-programmed keys control

functions referred to on line 0000 (see table on page 7). Restore the user code setting on S1, see table A on page 15.

Warning

Programming/deleting intercom address (selective intercom only)

Selective intercom addresses

You must set the intercom address on all the riser’s internal units.

You can assign the same intercom address to a maximum of 3 internal units.

For group calls, select the desired intercom codes simultaneously (max. 3).

Advanced monitor conﬁguration

Programming for intercom call

General intercom: function allowing calls to one or more internal units identified by the same call address as used

by the external unit.

Selective intercom: function allowing calls to one or more internal units identified by a dedicated call address (see

table B, page 8) which is different from the one used by the external unit.

General and selective intercoms CANNOT be used together on the same riser.

Take note of the S2, S1 setting and restore it when programming is complete

1) 2) 3)

Programming; set code,

TAB. B on page 8

S2 DIP

1 2 3 4 5 6

000111

Cancellation

DIP OFF

DIP ON

S2 DIP

1 2 3 4 5 6

111111

TAB. B

Code Dip switch ON S1 Code Dip switch ON S1

1 1 5 5

2 2 6 6

3 3 7 7

4 4 8 8

Example 1 - all systems (INCLUDING KITS!) - General intercom

on a monitor with user code 5, P3 programming = general internal call, P4 = general intercom with address 9

Example 2 - Selective intercom

on a monitor with user code 1 and intercom address 1, P3 programming = selective intercom with address 2, P4 = selective

intercom with address 3

1. Set S2 DIP switch 6 to the combination 01.

»the privacy LED ﬂashes.

S2 DIP

1 2 3 4 5 6

000001

2. Refer to the table on page 9 and select a combination in which the intercom function (either INT or INTb) is listed for the

keys you wish to program.

E.g. 1: for P3= general internal call, set S2 DIP switches 1-2-3-4 to the combination 1000 or 0011 or 1011 (P3=INT), set S1

with address 5 in accordance with table A on page 15, go to point 3.

E.g. 1: for P4= general intercom, set S2 DIP switches 1-2-3-4 to the combination 1110 or 1011 (P4=INT), set S1 with

address 9 in accordance with table A on page 15, go to point 3.

E.g. 2: for P3= single-family intercom, set S2 DIP switches 1-2-3-4 to the combination 1000 or 0011 or 1011 (P3=INT), set

S1 with address 2 in accordance with table B on page 8, go to point 3.

E.g. 2: for P4= selective intercom, set S2 DIP switches 1-2-3-4 to the combination 1110 or 1011 (P4=INT), set S1 with

address 3 in accordance with table B on page 8, go to point 3.

3. Press and release the key to be associated with the function

»the lock-release LED lights up.

»a conﬁrmation tone will sound.

4. To exit programming mode, set S2 DIP switches 5-6 to the combination 00

fthe privacy LED switches o

5. When programming is complete, set S2 DIP switches 1-2-3-4 to the combination 1111. Restore the user code

setting on S1, see table A on page 15.

Programming buttons for intercom call

DIP S2 Art. (6700W / 6700W/BM / 6701W / 6701W/BM ) +

Art. 6733W Art. 6701B / 6701B/BM DIP S1

DIP 1 DIP 2 DIP 3 DIP 4 P1 P2 P3 P4 P5 P6

ADDRESS

0 0 0 0

1 0 0 0 INT INTb

0 1 0 0 INT INTb

1 1 0 0

0 0 1 0

1 0 1 0 INT INTb

0 1 1 0 INTb

1 1 1 0 INTb INT INT

0 0 0 1 INT INTb

1 0 0 1 INT

0 1 0 1 INT

1 1 0 1

0 0 1 1 INTb INT

1 0 1 1 INT INT INT INT INT INT

0 1 1 1

1 1 1 1 PROG

Direct programming of intercom call

NOTE If a call is received during programming, it must be answered and the programming procedure resumed

afterwards.

Allows direct programming of intercom call via the internal units.

√Requires 2 operators

Step 1: enter programming mode

Operator 1 and Operator 2 carry out the following procedures on 2 internal units:

1. Set S2 DIP switches 1-2 -3-4 to the combination 1111

2. Lift the handset

3. Press and hold the privacy and lock-release keys for 3 sec.

»The internal unit emits 1 tone.

»The privacy LED ﬂashes.

»The internal unit enters audio mode.

»At this point the 2 operators will be communicating with each other.

Step 2: intercom call programming

Operator 1:

fPress the key you want to program to call operator 2 (e.g. 2).

»The internal unit manned by operator 1 emits a conﬁrmation tone.

Operator 2:

fPress the key you want to program to call operator 1 (e.g. 1).

»The internal unit manned by operator 2 emits a conﬁrmation tone.

Operator 1/ Operator 2:

fHang up the handset.

»The internal unit emits 1 tone.

»Programming of the 2 internal units is now complete.

To program another internal unit, move on to STEP 3.

Step 3: programming other internal units

Operator 1/ Operator 2:

1. Once the new station has been reached, carry out step 1 to begin communication

2. Repeat step 2

Example:

on a monitor with user code 5, P1 programming = generic actuator, P2 = coded actuator (code 125)

1. Set S2 DIP switch 6 to the combination 01.

»the privacy LED ﬂashes.

S2 DIP

1 2 3 4 5 6

000001

2. Refer to the table on page 11 and select a combination in which the actuator function (ACT) is listed for the keys you

wish to program.

E.g.: for P1= generic actuator, set S2 DIP switches 1-2-3-4 to the combination 0000 or 1100 or 0010 (P1=ACT), set S1 DIP

switches to the combination 11111111, go to point 3.

E.g.: for P2= coded actuator (code 125), set S2 DIP switches 1-2-3-4 to the combination 0010 or 1010 (P2=ACT), set S1

with address 125 in accordance with table A on page 15, go to point 3.

3. Press and release the key to be associated with the function.

»the lock-release LED lights up.

»a conﬁrmation tone will sound.

4. To exit programming mode, set S2 DIP switches 5-6 to the combination 00.

»the privacy LED switches o.

5. When programming is complete, set S2 DIP switches 1-2-3-4 to the combination 1111. Restore the user code

setting on S1, see table A on page 15.

DIP S2 Art. (6700W / 6700W/BM / 6701W / 6701W/BM ) +

Art. 6733W Art. 6701B / 6701B/BM DIP S1

DIP 1 DIP 2 DIP 3 DIP 4 P1 P2 P3 P4 P5 P6

ADDRESS

0 0 0 0 ACT

1 0 0 0 ACT

0 1 0 0 ACT

1 1 0 0 ACT

0 0 1 0 ACT ACT ACT ACT ACT ACT ACT

1 0 1 0 ACT

0 1 1 0

1 1 1 0

0 0 0 1

1 0 0 1

0 1 0 1 ACT

1 1 0 1 ACT

0 0 1 1 ACT

1 0 1 1

0 1 1 1

1 1 1 1 PROG

Programming keys for generic or coded actuator

Take note of the DIP-switch settings

Programming buttons for other functions

DIP S2 Art. (6700W / 6700W/BM / 6701W / 6701W/BM ) + Art. 6733W

Art. 6701B / 6701B/BM

DIP 1 DIP 2 DIP 3 DIP 4 P1 P2 P3 P4 P5 P6

0000 AI CCS D PAN K

1000CCS AI D

0 1 0 0 AI CCS CCP

1 1 0 0 CCS CCP PAN K D

0 0 1 0

1 0 1 0 CCS CCP PAN

0 1 1 0 AI D K CCS CCP

1 1 1 0 AI PAN D

0 0 0 1 CCS PAN D AI

1 0 0 1 K CCS PAN CCP AI

0 1 0 1 CCP K PAN AI

1 1 0 1 PAN CCP CCS K D

0 0 1 1 AI D CCS

1 0 1 1

0 1 1 1 NULL NULL NULL NULL NULL NULL NULL

1 1 1 1 PROG

Legend

Lock- release

AI Self-ignition

CCP Main switchboard call – not for use in systems with KIT

CCS Secondary switchboard call – not for use in systems with KIT

K Guardian doorentry phone call

D Doctor

PAN Panic – not for use in systems with KIT

NULL No function

PROG Programmed functions

Example:

on a monitor with user code 5, P1 programming = self-ignition, P4 = Secondary switchboard call.

1. Set S2 DIP switch 6 to the combination 01.

»the privacy LED ﬂashes.

S2 DIP

1 2 3 4 5 6

000001

2. Refer to the table on page 12 and select a combination in which the desired/necessary functions are listed for the keys

you wish to program.

E.g. 1: for P1= self-ignition, P4= switchboard call, set S2 DIP switches 1-2-3-4 to the combination 0110 (P1=AI, P4=CCS).

3. Press and release the keys to which you wish to assign the functions

»the lock-release LED lights up.

»une tonalité de conﬁrmation retentit.

4. To exit programming mode, set S2 DIP switches 5-6 to the combination 00

»the privacy LED switches o.

5. When programming is complete, set S2 DIP switches 1-2-3-4 to the combination 1111.

Carry out steps 1 to 4

Programming range

Monitor ringtone selection

Take note of the S2, S1 setting and restore it when programming is complete

1) 2) 3) 4)

Range minimum

address

set code, TAB. A

on page 15

S2 DIP

123456

000010

Range maximum

address

Enable range

Disable range

Deleting the range

DIP OFF

DIP ON

S2 DIP

123456

111110

S2 2 sec

1. Press and hold for 6 sec.

»a conﬁrmation tone will sound

»the privacy LED will ﬂash to indicate “programming” mode.

√The procedure can only take place while the system is in standby; otherwise the privacy LED will ﬂash 4 times to inform the

user that the system is engaged

2. Press and release

Once (1 conﬁrmation tone is emitted) to change the ringtone for calls from the external unit.

Twice (2 conﬁrmation tones are emitted) to change the ringtone for calls from the switchboard.

3 times (3 conﬁrmation tones are emitted) to change the ringtone for intercom calls made from the internal unit.

4 times (4 conﬁrmation tones are emitted) to change the ﬂoor door call ringtone.

Any further pressing of the key repeats the sequence described above.

3. Press and release to scroll through the various available ringtones in sequence.

4. Press to conﬁrm selection of the last ringtone heard and to exit (at any time) change monitor ringtone mode.

»one conﬁrmation tone is emitted

»the privacy LED switches o

5. Repeat steps 1 to 4 to change the other ringtones.

Factory settings:

• Button functions for the S2 DIP switch 1-2-3-4 combination;

• Intercom address absent;

• Range function and min./max. addresses absent;

• Ringtone reset.

Programming reset

Take note of the S2, S1 setting and restore it when programming is complete

1) 2) 3)

DIP OFF

DIP ON

S2 DIP

1 2 3 4 5 6

111111

5 sec

Riser addresses

* NOTE: code 240 is reserved for the porter switchboard

TAB. A

Code

Dip switch

Code

Dip switch

Code

Dip switch

Code

Dip switch

Code

Dip switch

Code

Dip switch

Code

Dip switch

Code

Dip switch

1 1 31 1,2,3,4,5 61 1,3,4,5,6 91 1,2,4,5,7 121 1,4,5,6,7 151 1,2,3,5,8 181 1,3,5,6,8 211 1,2,5,7,8

2 2 32 6 62 2,3,4,5,6 92 3,4,5,7 122 2,4,5,6,7 152 4,5,8 182 2,3,5,6,8 212 3,5,7,8

3 1,2 33 1,6 63 1,2,3,4,5,6 93 1,3,4,5,7 123 1,2,4,5,6,7 153 1,4,5,8 183 1,2,3,5,6,8 213 1,3,5,7,8

4 3 34 2,6 64 7 94 2,3,4,5,7 124 3,4,5,6,7 154 2,4,5,8 184 4,5,6,8 214 2,3,5,7,8

5 1,3 35 1,2,6 65 1,7 95 1,2,3,4,5,7 125 1,3,4,5,6,7 155 1,2,4,5,8 185 1,4,5,6,8 215 1,2,3,5,7,8

6 2,3 36 3,6 66 2,7 96 6,7 126 2,3,4,5,6,7 156 3,4,5,8 186 2,4,5,6,8 216 4,5,7,8

71,2,3 37 1,3,6 67 1,2,7 97 1,6,7 127 1,2,3,4,5,6,7 157 1,3,4,5,8 187 1,2,4,5,6,8 217 1,4,5,7,8

8 4 38 2,3,6 68 3,7 98 2,6,7 128 8 158 2,3,4,5,8 188 3,4,5,6,8 218 2,4,5,7,8

9 1,4 39 1,2,3,6 69 1,3,7 99 1,2,6,7 129 1,8 159 1,2,3,4,5,8 189 1,3,4,5,6,8 219 1,2,4,5,7,8

10 2,4 40 4,6 70 2,3,7 100 3,6,7 130 2,8 160 6,8 190 2,3,4,5,6,8 220 3,4,5,7,8

11 1,2,4 41 1,4,6 71 1,2,3,7 101 1,3,6,7 131 1,2,8 161 1,6,8 191 1,2,3,4,5,6,8 221 1,3,4,5,7,8

12 3,4 42 2,4,6 72 4,7 102 2,3,6,7 132 3,8 162 2,6,8 192 7,8 222 2,3,4,5,7,8

13 1,3,4 43 1,2,4,6 73 1,4,7 103 1,2,3,6,7 133 1,3,8 163 1,2,6,8 193 1,7,8 223 1,2,3,4,5,7,8

14 2,3,4 44 3,4,6 74 2,4,7 104 4,6,7 134 2,3,8 164 3,6,8 194 2,7,8 224 6,7,8

15 1,2,3,4 45 1,3,4,6 75 1,2,4,7 105 1,4,6,7 135 1,2,3,8 165 1,3,6,8 195 1,2,7,8 225 1,6,7,8

16 5 46 2,3,4,6 76 3,4,7 106 2,4,6,7 136 4,8 166 2,3,6,8 196 3,7,8 226 2,6,7,8

17 1,5 47 1,2,3,4,6 77 1,3,4,7 107 1,2,4,6,7 137 1,4,8 167 1,2,3,6,8 197 1,3,7,8 227 1,2,6,7,8

18 2,5 48 5,6 78 2,3,4,7 108 3,4,6,7 138 2,4,8 168 4,6,8 198 2,3,7,8 228 3,6,7,8

19 1,2,5 49 1,5,6 79 1,2,3,4,7 109 1,3,4,6,7 139 1,2,4,8 169 1,4,6,8 199 1,2,3,7,8 229 1,3,6,7,8

20 3,5 50 2,5,6 80 5,7 110 2,3,4,6,7 140 3,4,8 170 2,4,6,8 200 4,7,8 230 2,3,6,7,8

21 1,3,5 51 1,2,5,6 81 1,5,7 111 1,2,3,4,6,7 141 1,3,4,8 171 1,2,4,6,8 201 1,4,7,8 231 1,2,3,6,7,8

22 2,3,5 52 3,5,6 82 2,5,7 112 5,67 142 2,3,4,8 172 3,4,6,8 202 2,4,7,8 232 4,6,7,8

23 1,2,3,5 53 1,3,5,6 83 1,2,5,7 113 1,5,6,7 143 1,2,3,4,8 173 1,3,4,6,8 203 1,2,4,7,8 233 1,4,6,7,8

24 4,5 54 2,3,5,6 84 3,5,7 114 2,5,6,7 144 5,8 174 2,3,4,6,8 204 3,4,7,8 234 2,4,6,7,8

25 1,4,5 55 1,2,3,5,6 85 1,3,5,7 115 1,2,5,6,7 145 1,5,8 175 1,2,3,4,6,8 205 1,3,4,7,8 235 1,2,4,6,7,8

26 2,4,5 56 4,5,6 86 2,3,5,7 116 3,5,6,7 146 2,5,8 176 5,6,8 206 2,3,4,7,8 236 3,4,6,7,8

27 1,2,4,5 57 1,4,5,6 87 1,2,3,5,7 117 1,3,5,6,7 147 1,2,5,8 177 1,5,6,8 207 1,2,3,4,7,8 237 1,3,4,6,7,8

28 3,4,5 58 2,4,5,6 88 4,5,7 118 2,3,5,6,7 148 3,5,8 178 2,5,6,8 208 5,7,8 238 2,3,4,6,7,8

29 1,3,4,5 59 1,2,4,5,6 89 1,4,5,7 119 1,2,3,5,6,7 149 1,3,5,8 179 1,2,5,6,8 209 1,5,7,8 239 1,2,3,4,6,7,8

30 2,3,4,5 60 3,4,5,6 90 2,4,5,7 120 4,5,6,7 150 2,3,5,8 180 3,5,6,8 210 2,5,7,8 *240 5,6,7,8

Operating distances with Art. 4888C

The total number of internal units with the same user code and call repetition devices (additional ringtone Art. 1229A)

connected to these internal units cannot exceed 4 (with a maximum of 2 main internal units).

Connect only one call repetition device for each internal unit.

4888C

1214/2C

1216

6700W

6701W

6701B

A MAX B MAX F MAX H MAX

Comelit Art.4577/4579 1 mm2 (Ø 1,2 mm AWG 17) 200 m

(655 feet)

200 m

(655 feet)

50 m

(165 feet)

100 m

(330 feet)

UTP5 cat. 5 0,2 mm2 (Ø 0,5 mm AWG 24) 80 m

(260 feet)

150 m

(490 feet)

60 m

(195 feet)

0,28 mm2 (Ø 0,6 mm AWG 23) 100 m

(330 feet)

150 m

(490 feet)

5 m

(15 feet)

60 m

(195 feet)

0,5 mm2 (Ø 0,8 mm AWG 20) 120 m

(395 feet)

100 m

(330 feet)

25 m

(85 feet)

60 m

(195 feet)

1 mm2 (Ø 1,2 mm AWG 17) 120 m

(395 feet)

150 m

(490 feet)

50 m

(165 feet)

60 m

(195 feet)

1 mm2 (Ø 1,2 mm AWG 17)



120 m

(395 feet)

80 m

(260 feet)

50 m

(165 feet)

40 m

(130 feet)

1,5 mm2 (Ø 1,4 mm AWG 15) 150 m

(490 feet)

100 m

(330 feet)

75 m

(245 feet)

60 m

(195 feet)

2,5 mm2 (Ø 1,8 mm AWG 13) 100 m

(330 feet)

SB2V/039MINIC

123456

33436

4680KC

NONC

2 3 4

4888C

230V

~ ~

2628/2638

SCP

OUT

1214/2C

1216

L L

1234 675 8

85 764321 1234 675 8

1595

120-230 V

4680C

OUT

1214/2C

85 764321 1234 675 8

OUT

1214/2C

6700W

6701W

6701B

6700W/BM

6701W/BM

6701B/BM

+ 6710

6700W

6701W

6701B

6700W/BM

6701W/BM

6701B/BM

+ 6710

Art. 4680KC manages calls originating from ONLY digital or button modules if they fall between address 1 and address 10.

* Local door-opener button

Wiring diagrams with Art. 4888C

System with Art. 4888C: 1 Ikall series external unit

SB2/A19MINIC

1 2 3 4 5 6 1 2 3 4 5 6

1216

CV5

85 764321 1234 675 8

1234 675 8

S1 S1

85 764321

6700W

6701W

6701B

6700W

6701W

6701B

OUT

1214/2C

P P

6700W/BM

6701W/BM

6701B/BM

+ 6710

6700W/BM

6701W/BM

6701B/BM

+ 6710

System with Art. 4888C: 2 main monitors in cascade connection

SB2/A22MINIC

123456 123456

1 2 3 4 5 6

P P

1216

85 764321

1234 675 8

CV5

85 764321 1234 675 8

85 764321

OUT

1214/2C

OUT

1214/2C

6700W

6701W

6701B

6700W

6701W

6701B

6700W

6701W

6701B

1234 65

6700W/BM

6701W/BM

6701B/BM

+ 6710

6700W/BM

6701W/BM

6701B/BM

+ 6710

6700W/BM

6701W/BM

6701B/BM

+ 6710

System with Art. 4888C: 2 main monitors and 1 secondary monitor in branch connection

SB2/A21MINIC

123456 123456 123456

1216

85 764321 1234 675 8

1234 675 8

CV5

85 764321 1234 675 8

1234 675 8

OUT

1214/2C

6700W

6701W

6701B

CV5

6700W

6701W

6701B

6700W

6701W

6701B

P P S

6700W/BM

6701W/BM

6701B/BM

+ 6710

6700W/BM

6701W/BM

6701B/BM

+ 6710

6700W/BM

6701W/BM

6701B/BM

+ 6710

System with Art. 4888C: 2 main monitors and 1 secondary monitor in cascade connection

1209

4893

6700W

6701W

1209

4893

1214/2C

1216

1214/2C

6700W

6701W

6700W

6701W

Operating distances with KIT 8461M-MB

The total number of internal units with the same user code and call repetition devices (additional ringtone Art. 1229A)

connected to these internal units cannot exceed 4 (with a maximum of 1 main internal unit and 3 secondary internal units).

Connect only one call repetition device for each internal unit.

A MAX B MAX

Comelit Art. 4577/4579 1 mm2 (Ø 1,2 mm AWG 17) 200 m

(655 feet)

100 m

(330 feet)

UTP5 cat. 5 0,2 mm2 (Ø 0,5 mm AWG 24) 100 m

(330 feet)

60 m

(195 feet)

0,28 mm2 (Ø 0,6 mm AWG 23) 100 m

(330 feet)

60 m

(195 feet)

0,5 mm2 (Ø 0,8 mm AWG 20) 100 m

(330 feet)

60 m

(195 feet)

1 mm2 (Ø 1,2 mm AWG 17) 100 m

(330 feet)

60 m

(195 feet)

1 mm2 (Ø 1,2 mm AWG 17) 80 m

(260 feet)

40 m

(130 feet)

1,5 mm2 (Ø 1,4 mm AWG 15) 100 m

(330 feet)

60 m

(195 feet)

*UTP5 cat. 5 0,2 mm2 (Ø 0,5 mm AWG 24)

MULTI PAIR CABLE

GREEN

ORANGE

BLU

GREEN / WHITE

ORANGE / WHITE

BLU / WHITE

BROWN / WHITE

BROWN

200 m

(660 feet)

70 m

(230 feet)

UTP cable with multi-cable connection: FOLLOW THE COLOURS SHOWN IN THE DIAGRAM!

4681

1214/2C

1216

1210

1214/2C

4681

1214/2C

1216

1210

6700W

6701W

6701B

6700W

6701W

6701B

6700W

6701W

6701B

6700W

6701W

6701B

6700W

6701W

6701B

6700W

6701W

6701B

1214/2C

Operating distances with Art. 1210

The total number of internal units with the same user code and call repetition devices (additional ringtone Art. 1229A)

connected to these internal units cannot exceed 4 (with a maximum of 1 main internal unit and 3 secondary internal units).

Connect only one call repetition device for each internal unit.

UTP cable with multi-cable connection: FOLLOW THE COLOURS SHOWN IN THE DIAGRAM!

A MAX B MAX C MAX H MAX

Comelit Art. 4577/4579 1 mm2 (Ø 1,2 mm AWG 17) 260

(850 feet)

130

(425 feet)

130

(425 feet)

(164 feet)

UTP5 cat. 5 0,2 mm2 (Ø 0,5 mm AWG 24) 80

(260 feet)

(130 feet)

(98 feet)

0,28 mm2 (Ø 0,6 mm AWG 23) 100

(328 feet)

(164 feet)

(98 feet)

0,5 mm2 (Ø 0,8 mm AWG 20) 140

(460 feet)

(230 feet)

(98 feet)

1 mm2 (Ø 1,2 mm AWG 17) 200

(656 feet)

100

(328 feet)

100

(328 feet)

(130 feet)

1,5 mm2 (Ø 1,4 mm AWG 15) 80

(260 feet)

(130 feet)

(98 feet)

*UTP5 cat. 5 0,2 mm2 (Ø 0,5 mm AWG 24)

MULTI PAIR CABLE

GREEN

ORANGE

BLU

GREEN / WHITE

ORANGE / WHITE

BLU / WHITE

BROWN / WHITE

BROWN

260

(850 feet)

130

(425 feet)

130

(425 feet)

(164 feet)

Wiring diagrams with KIT 8461M-MB and Art.1210

KIT 8461M-MB: standard single-family system

System with Art. 1210

85 764321 1234 675 8

6700W

6701W

6700W/BM

6701W/BM

LL O

NC C

1209

110-240V

4893

30 Vdc

MNK/039QC

* Local door-opener button

1 2 3 4 5 6

85 764321 123 4 675 8

6700W

6701W

6701B

OUT

1214/2C

OUT

1214/2C

85 764321 123 4 675 8

6700W

6701W

6701B

1216

1210

110-240V

4681

33436

S2W/001MI

* Local door-opener button

SB2/A24MINIC

1 2 3 4 5 6

1216

1234 675 8

OUT

1214/2C

1234 675 8

S2S1

85 764321

OUT

1214/2C

6700W

6701W

6701B

1209/1210

6700W/BM

6701W/BM

6701B/BM

+ 6710

6700W

6701W

6701B

6700W/BM

6701W/BM

6701B/BM

+ 6710

Floor door call connection variant

If there are a number of door-entry phones or monitor brackets with the

same user code, connect the CFP button to one only; all the devices will ring

simultaneously.

* 20 m MAX - Use screened cable for the connection and do not run cables

near heavy inductive loads or power supply cables (230V / 400V).

CFP

KIT 8461M-MB or system with Art. 1210: secondary monitor in branch connection

KIT 8461M-MB or system with Art. 1210: 2 additional secondary monitors in cascade

connection

1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6

12 34 6 75 8

CV5

85 764321 12 34 6 75 8

1209 / 1210

CV5

12 34 6 75 8

P S S

6700W

6701W

6701B

6700W

6701W

6701B

6700W/BM

6701W/BM

6701B/BM

+ 6710

6700W

6701W

6701B

6700W/BM

6701W/BM

6701B/BM

+ 6710

6700W/BM

6701W/BM

6701B/BM

+ 6710

SB2/A23MINIC

3 ed. - 1rev. 04/2017

cod. 2G40001629

www.comelitgroup.com

Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy

CERTIFIED MANAGEMENT SYSTEMS

Manuale_Tecnico_posto_interno_MINI_Art.6701_Art.6700_3ED_EN_cod.2G40001629 6701W Technical Manual

6701W-tech-manual 6701W-tech-manual

6701W-tech-manual 6701W-tech-manual

Navigation menu

Versions of this User Manual:

Views

Navigation