7.3.1.2 Packet Tracer Skills Integration Challenge Instructions

7.3.1.2%20Packet%20Tracer%20-%20Skills%20Integration%20Challenge%20Instructions

7.3.1.2%20Packet%20Tracer%20-%20Skills%20Integration%20Challenge%20Instructions

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 3

Download7.3.1.2 Packet Tracer - Skills Integration Challenge Instructions
Open PDF In BrowserView PDF
Packet Tracer - Skills Integration Challenge
Topology

Addressing Table
IPv4 Address
Device

Subnet Mask

Interface
IPv6 Address/Prefix
S0/0/0

172.31.6.1

255.255.255.252

S0/0/1

10.10.8.1

255.255.255.252

S0/1/0

209.165.200.226

255.255.255.224

R1

S0/0/0

172.31.6.2

255.255.255.252

R2

S0/0/1

10.10.8.2

255.255.255.252

S0/0/0

2001:DB8:A001:6::1/64

S0/0/1

2001:DB8:A001:7::1/64

S0/1/0

2001:DB8:CAFE:1::2/64

R3

S0/0/0

2001:DB8:A001:7::2/64

R4

S0/0/1

2001:DB8:A001:6::2/64

IPv4-Edge

IPv6-Edge

Scenario
In this activity, you are tasked with implementing EIGRP for IPv4 and IPv6 on two separate networks. Your
task includes enabling EIGRP, assigning router-IDs, changing the hello timers, configuring EIGRP summary
routes and limiting EIGRP advertisements.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 1 of 3

Packet Tracer - Skills Integration Challenge

Requirements
EIGRP for IPv4


Implement EIGRP on IPv4 enabled routers using Autonomous System 1.
-

Use the classful network address for the loopback interfaces.

-

Use the wildcard mask to advertise the /30 networks between R1, R2 and IPv4-Edge.

-

Use the default method to only allow EIGRP updates out the active EIGRP serial interfaces.

-

Advertisements should not be summarized.



Configure a directly attached default route on IPv4-Edge and propagate it in EIGRP updates.



Configure the serial interfaces between R1, R2 and IPv4-Edge to send hellos every 10 seconds.



On R1 and R2, configure an EIGRP summary route for the loopback networks.
R1 Loopback Networks

R2 Loopback Networks

172.31.0.0/25

10.10.0.0/24

172.31.0.128/25

10.10.1.0/24

172.31.1.0/25

10.10.2.0/23

172.31.1.128/25

10.10.4.0/22

Summary:

Summary:



R1 and R2 should only have four EIGRP routes in the routing table, one of which is the default route
(D*EX). IPv4-Edge should only have two EIGRP routes in the routing table.



Verify R1 and R2 can ping the IPv4 Server. IPv4 Server should also be able to ping every loopback
address on R1 and R2.

EIGRP for IPv6


Implement EIGRP on IPv6 enabled routers using Autonomous System 1.
-

Assign IPv6-Edge with the router-ID of 1.1.1.1

-

Assign R3 with the router-ID of 3.3.3.3

-

Assign R4 with the router-ID of 4.4.4.4



Configure a directly attached default route on IPv6-Edge and propagate it in EIGRP updates.



On R3 and R4, configure an EIGRP summary route for the loopback networks.
R3 Loopback Networks



R4 Loopback Networks

2001:DB8:1:1:A000::1/72

2001:DB8:1:1:BB80::1/76

2001:DB8:1:1:A100::1/72

2001:DB8:1:1:BB90::1/76

2001:DB8:1:1:A200::1/72

2001:DB8:1:1:BBA0::1/76

2001:DB8:1:1:A300::1/72

2001:DB8:1:1:BBB0::1/76

Summary:

Summary:

R3 and R4 should only have four EIGRP routes in the routing table, counting the default external route.
IPv6-Edge should only have two EIGRP routes in the routing table.

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Page 2 of 3

Packet Tracer - Skills Integration Challenge


Verify R3 and R4 can ping the IPv6 Server. IPv6 Server should also be able to ping every loopback
address on R3 and R4.

Suggested Scoring Rubric
Note: Packet Tracer does not currently grade EIGRP for IPv6 summary routes. Therefore, part of your grade
depends on routing table verification by your instructor.

Scored Work

Possible
Points

IPv6-Edge Routing Table

10

Packet Tracer Score

90

Total Score

100

© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public.

Earned
Points

Page 3 of 3



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : en-US
Tagged PDF                      : Yes
Author                          : Betty Staerk
Creator                         : Microsoft® Word 2016
Create Date                     : 2016:12:20 11:02:16-07:00
Modify Date                     : 2016:12:20 11:02:16-07:00
Producer                        : Microsoft® Word 2016
EXIF Metadata provided by EXIF.tools

Navigation menu