7800477 BTP22675HW, 22 6.75GT High Wheel Self Propelled Mower (2009) !!
Preview ! 7800477 Yard Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection
User Manual: !! Yard Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
7800477 - BTP22675HW N o R tf ep o r ro du ct io n Parts Manual Manual Part No.7006274 Revision A Rev. Date 02/2009 Table Of Contents PRODUCT COMPONENTS PAGES Handle & Bag Group ............................................................................................................................................ Engine, Blade & Deck Group ............................................................................................................................... Wheels & Covers Group ...................................................................................................................................... Decal Group ......................................................................................................................................................... 4 6 8 12 N o R tf ep o r ro du ct io n Torque Specification Chart ..................................................................... Inside Back Cover Handle & Bag Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 3 Handle & Bag Group REF NO PART NO. QTY. DESCRIPTION 7101676AMA 7300705AMA 7023810YP 071530MA 7076978SM 7101861MA 025X14MA 7024649YP 1101670MA 7035744YP 7090391SM 7102573YP 7101230AYP 7091740SM 7301013AYP 7091508SM 7090951SM 1 1 1 1 2 1 1 4 1 4 4 1 1 4 1 2 2 BAIL, OPC PROPELLED HANDLE, UPPER, PROPELLED FOAM GRIP, 18.75 (on upper handle, not shown) GUIDE, ROPE (1/4-20 thread) NUT, HEX, 1/4C NYL RNG CABLE, BAIL, HW PROPELLED BOLT, HEX .25-20 X 2.00 WIRE TIE, 11 INCH STD BLK NYLON CONTROL, DRIVE, SINGLE SPEED KNOB, 5/16-18 WING (BLACK) LOCKWASHER, 5/16 BAG, CLOTH, GRASS BAG FRAME, BAG 22" BOLT, 5/16-18 X 2 GR2 was 7091189YP HANDLE, LOWER (2009) BOLT, 5/16-18 X 3/4 GR5 YZ NUT, HEX, 5/16-18 BLACK N o R tf ep o r ro du ct io n 1 2 -3 4 5 6 7 8 9 10 11 12 13 14 15 16 Footnotes The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 4 Engine, Blade & Deck Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 5 Engine, Blade & Deck Group REF NO PART NO. QTY. DESCRIPTION -7101449YP 7900018YP 1101596MA 7300400ZMA 025X11MA 7100763MA 26X303MA 7100740YP 7100851AYP 1101989MA 01X144MA 1 1 1 1 1 3 1 1 1 1 1 1 * ENGINE, B&S, 6.75GT Mod. 126T02-0675-B3 ASSY, ENGINE SPACER , 22 WBM, PROPELLED (incl. 3 bushings, p/n 7101448) SCREW, Round Washer Head Torx, Hi-Lo COVER, BELT 22” (same look except no top hole) DECK, 22 WALK, 3-N-1 BOLT, 3/8-16 NS X 2.50” PULLEY, ENGINE, 22 DECK, SS SCREW, #8-11 X .63 POLY HUB, BLADE, 22 DECK BLADE, 22, WALK MOWER WASHER, BELLVILLE, .38 ID X 1.183 OD BOLT, HEX HEAD, 3/8-24 NF X 3.25 N o R tf ep o r ro du ct io n 1 2 3 4 5 6 7 8 9 10 11 12 Footnotes NOTE: * Purchase engine parts from engine manufacturer dealer. The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 6 Wheels & Covers Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 7 Wheels & Covers Group QTY. DESCRIPTION 7300400ZMA 1101105MA 7091286YP 7300440ZMA 028X49MA 215X21MA 7101243YP 7101461YP 7091020YP 1101596MA 7900018YP 7300582ZMA 7300583ZMA 7101193MA 7091508SM 7090951SM 26X217MA 7300855ZMA 7300856ZMA 015X88MA 7900053MA 7091086YP 7090606SM 7091528SM 7101931MA 7091585SM 17X169MA 7101708MA 7026257MA 7101206MA 7101270YP 043844MA 164X27MA 01X156MA 7300854ZMA 7101351MA 7101710MA 7014341YP 7101207YP 7101402YP 1101097MA 215X19ZMA 166X38MA 1 1 4 1 2 1 1 1 4 1 1 1 1 1 2 2 3 1 1 3 8 6 2 2 2 4 4 2 2 1 2 1 1 1 1 2 2 4 2 2 1 1 1 DECK, 22 WALK, 3-N-1 GUARD, REAR 22 HW (19-1/2 long) was 721685 (18-1/4 long) HWST, 10-24X.50 SEMS BAFFLE, FRONT, 22 WBM CAP, RETAINER ROD, PIVOT, REAR DOOR DOOR, REAR DISCHARGE, 22 WALK MOWER SPRING, TORSION, REAR DOOR, 22 WBM PUSHNUT, 1/4 COVER, BELT 22” SCREW, Round Washer Head Torx, Hi-Lo BRACKET, LOWER HANDLE, RH, 22 WBM, HW (not shown detached) BRACKET, LOWER HANDLE, LH, 22 WBM, HW (not shown detached) BELT, DRIVE 22 (3L Section;33.75 effective length) RHSSNB, 5/16-18 X 3/4 GR5 YZ LHCLN, 5/16-18 BLACK TORX ST, 1/4-20 X 11/16 BRACKET, CHUTE PLATE-MULCH, 22 RB SCOTT'S NUT, HEX FLANGE LOCK, 5/16-18 NC HFLN, 3/8-16, BRIGHT ZINC HHCS, 3/8-16 X 3/4 HFLB, 5/16-18 X 5/8 FLW, .375 X .875 X .083 YZ HUBCAP, 12 WHEEL, BLACK HCLN, 3/8-16 YZ WASHER, FLAT, 1 OD X .387 ID WHEEL, 12X 2 IDLE, W/DB TRD, BRUTE YELLOW WASHER, .531 X .781 3-WAVE TRANSMISSION, 22 WBM SS, FWD PIN, DRIVE, 22 WBM, FWD SPACER, ENGINE SPRING, COMPRESSION BOLT, Hex-Head 5/16-18 X 3.00 P&OIL BAFFLE, REAR, 22 DECK HUBCAP, ROUND, BLACK WHEEL, 8X 2 DRIVE, W/DB TRD, BRUTE YELLOW RETAINING RING GEAR, PINION, 22 WBM, FWD SHIELD, DUST, 22 WBM, FWD CHUTE, SIDE, PLASTIC, BLACK ROD, PIVOT, CHUTE SPRING, TORSION, CHUTE N o R tf ep o r ro du ct 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 io n REF NO PART NO. Footnotes The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 8 Wheels & Covers Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 9 Wheels & Covers Group REF NO PART NO. QTY. DESCRIPTION 1101098MA 7501056YP 7501055YP 7501057YP 7501058YP 7100633YP 1 1 1 1 1 COVER, MULCH, PLASTIC, BLACK ASSY, Height-Of-Cut, RR, 22”, 9 Position (shown detached) ASSY, Height-Of-Cut, LR, 22”, 9 Position (shown attached) ASSY, Height-Of-Cut, RF, 22”, Propelled, 9 Position (shown detached) ASSY, Height-Of-Cut, LF, 22”, Propelled, 9 Position (shown attached) GRIP, Latch, Height-Of-Cut (not shown) N o R tf ep o r ro du ct io n 44 45 46 47 48 -- Footnotes The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 10 Decal Group N o R tf ep o r ro du ct io n NOTE: Unless noted otherwise, use the standard hardware torque specification chart. The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 11 Decal Group REF NO PART NO. QTY. DESCRIPTION 7101911MA 7013010SM 7102286YP 7029782MA 7101815MA 7102372YP 7101394YP 1 1 1 1 1 1 1 DECAL, Engine, TP, Brute 675 DECAL, Danger, Cut Finger DECAL, Blade CPSC DECAL, OPC Bail International Symbol DECAL, Deck Front 22” DECAL, Customer Service, Brute DECAL, Warning, Rear Discharge Door N o R tf ep o r ro du ct io n 1 2 3 4 5 6 7 Footnotes The above parts group applies to the following Mfg. Nos.: 7800477 - BTP22675HW Briggs and Stratton Yard Power Products Group Copyright © 2009 by Briggs and Stratton Corporation Milwaukee, WI, USA. All rights reserved 12 MANITOBA Central Power (800) 444-7774 Atlantic Power (800) 456-5692 ONTARIO SEDCO (800) 346-4260 Preferred Power (800) 331-7164 io n N o R tf ep o r ro du ct SASKATCHEWAN MWE (800) 683-8484 ALBERTA Magneto Power (800) 733-7388 INCLUDES TRUST ISLANDS WITH UNITED STATES ZIPCODES HAWAII Small Engine Clinic BRITISH COLUMBIA Power Source Canada (905) 829-0006 QUEBEC 12/07 20 Empire Stat Rd Castleton, NY 12033 6509-A Northpark Blvd Charlotte, NC 28216 3700 Paragon Dr Columbus, OH 43228 1000 W. Donges Bay Rd Suite 100 Mequon, WI 53092 225 Henry D. Robinson Blvd Pendergrass, GA 30567 2815 Bristol Circle, Unit 1 Oakville, ON L6H 6X5 Atlantic Power Preferred Power Inc Central Power Systems Magneto Power LLC Sedco, Inc Power Source Canada, LTD io n 3700 Paragon Dr Columbus, OH 43228 Central Power Systems N o R tf ep o r ro du ct 700 Enterprise Rd Aurora, IL 60504 Midwest Engines www.powersourcecanada.ca www.sedcoinc.com www.magnetopower.com www.centralpower.com www.centralpower.com www.atlanticpowerinc.com www.centralpower.com www.mwe.net Briggs & Stratton Corporation INTEGRATED DISTRIBUTOR NETWORK (905) 829-0006 (800) 346-4260 (800) 733-7388 (800) 444-7774 (800) 331-7164 (800) 456-5692 (800) 444-7774 (800) 683-8484 Hardware Identification & Torque Specifications Torque Specification Chart Torque Specification Chart FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%) 5.6 8.8 Class 5.6 10.9 Class 10.9 Class 8.8 SAE Grade 2 Class 12.9 Size Of Hardware in/lbs Size Of Hardware ft/lbs Nm. in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. in/lbs ft/lbs Nm. M3 M4 M5 M6 M7 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30 M33 M36 M39 .56 1.28 2.50 4.3 7.1 10.5 21 36 58 88 121 171 230 295 435 590 800 1030 1340 13.44 30.72 60.96 7.3 12.1 17.7 35 61 101 147 202 290 390 497 733 995 1349 1740 2249 1.28 19.2 2.90 43.44 5.75 5.97 9.9 10.3 16.5 16.9 25 24 50 48 83 86.2 136 132 210 200 287 275 405 390 559 530 708 375 995 1032 1350 1401 1830 1902 2360 2441 3050 3163 1.80 4.10 8.10 14 23 34 67 117 185 285 390 550 745 960 1400 1900 2580 3310 4290 22.92 52.56 7.15 12.1 19.9 29 59 103 162 250 346 486 656 840 1239 1681 2278 2935 3798 2.15 4.95 9.7 16.5 27 40 81 140 220 340 470 660 890 1140 1680 2280 3090 3980 5150 20 10 30 40 50 60 80 70 90 Body Diameter Nut, M8 Screw, M8- 1.25 x 25 Thread Diameter (mm) Threads Inside Diameter (in) per inch 1/2 1 3/4 2.1 2.3 3.1 3.5 7.6 8.6 15.0 16.3 27.2 31.3 40.8 47.6 68.0 74.8 88.4 102.0 122.4 136 217.6 244.8 190.4 210.8 299.2 326.4 Body Length (mm) Body Length (in) in/lbs ft/lbs 30 31 43 49 8 10 17 19 30 35 50 55 75 90 110 120 150 180 260 300 400 440 580 640 SAE Grade 8 Nm. in/lbs ft/lbs Nm. 3.4 3.5 4.9 5.5 10.9 13.6 23.1 25.8 40.8 47.6 68.0 74.8 102.0 122.4 149.6 163.2 204.0 244.8 353.6 408.0 544.0 598.4 788.8 870.4 41 43 60 68 12 14 25 29 45 50 70 80 110 120 150 170 220 240 386 420 600 660 900 1,000 4.6 4.9 6.8 7.7 16.3 19.0 34.0 34.0 61.2 68.0 95.2 108.8 149.6 163.2 204.0 231.2 299.2 326.4 525.0 571.2 816.0 897.6 1,244.0 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. Screw, 1/2- 16 x 2 Nut, 1/2-16 1/4 Distance between threads (mm) Threads per inch Thread Diameter (mm) Body Diameter SAE Grade 5 Nm. 100 Body Length 0 19 20 27 31 66 76 11 12 20 23 30 35 50 55 65 75 90 100 160 180 140 155 220 240 8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 5/16-24 3/8-16 3/8-24 7/16-14 7/16-20 1/2-13 1/2-20 9/16-12 9/16-18 5/8-11 5/8-18 3/4-10 3/4-16 7/8-9 7/8-14 1-8 1-12 The guides and ruler furnished below are designed to help you select the appropriate hardware. 0 in/lbs ft/lbs N o R tf ep o r ro du ct 5.88 13.44 26.4 44.64 5.2 7.7 15 26 42 64 89 126 169 217 320 435 590 759 988 No Marks Hardware Grade 12.9 io n Property Class FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) 1/4 1/2 2 3/4 1/4 1/2 3 3/4 1/4 1/2 4 Common Hardware Types 3/4 Hex Head Capscrew Washer Standard Hardware Sizing When a washer or nut is identified as 1/2” (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is present it represents the threads per inch (distance between threads). When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ), this means the Nominal size, or body diameter is 1/2 inch (8mm metric thread diameter), the second number,16, represents the threads per inch, (1.25 thread diameter). The final number is the body length of the bolt or screw, 2 inches (50mm). Lockwasher Carriage Bolt Hex Nut Wrench & Fastener Size Guide 1/4” Bolt or Nut Wrench—7/16” 5/16” Bolt or Nut Wrench—1/2” 3/8” Bolt or Nut Wrench—9/16” M6 Bolt or Nut Wrench—10mm M8 Bolt or Nut Wrench—13mm M10 Bolt or Nut Wrench—17mm 7/16” Bolt or Nut 1/2” Bolt or Nut Wrench (Bolt)—5/8” Wrench—3/4” Wrench (Nut)—11/16” M12 Bolt or Nut Wrench—19mm M14 Bolt or Nut Wrench—22 mm io n N o R tf ep o r ro du ct IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS. BRUTE™ is a trademark of Briggs & Stratton Yard Power Products. Copyright© 2008 Briggs & Stratton Power Products Group. All rights reserved. No part of this page can be reproduced or transmitted in any form by any means without the express written permission of Briggs & Stratton Power Products Group. Briggs & Stratton Yard Power Products Group 3515 N. 124 Street / PO Box 702 Wauwatosa, WI 53222 USA www.brutepower.com © Copyright 2009 by Briggs & Stratton Corporation Milwaukee, WI, USA. All rights reserved
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Annotate, Fill forms, Extract, Print high-res Page Mode : UseThumbs XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2009:02:11 08:57:26-06:00 Modify Date : 2009:02:11 09:14:29-06:00 Metadata Date : 2009:02:11 09:14:29-06:00 Producer : Acrobat Distiller 8.1.0 (Windows) Format : application/pdf Title : 7800477 - BTP22675HW, 22" 6.75GT High Wheel Self-Propelled Mower (2009) Description : Parts Manual Creator : 46468 Document ID : uuid:7069a0a4-bfb0-4251-bff3-6ef425a9cefe Instance ID : uuid:b0f9c49b-cb36-4b79-8576-bf954a41b21b Has XFA : No Page Count : 16 Page Layout : TwoColumnRight Subject : Parts Manual Author : 46468EXIF Metadata provided by EXIF.tools