800764 1.3 Faros Quick Guide E Motion En
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
EMOTION FAROS QUICK GUIDE 800764-1.3 Faros Quick Guide Date of Issue: October 21, 2015 PACKAGE CONTENT Faros sensor is a compact wireless Electrocardiography (ECG) applications. This 1. 2. 3. 4. solution for package contains the following: Faros Sensor USB cable Cable set or Stingray Adapter and Chest Strap eMotion Faros Manager and eMotion EDF Viewer software. Cable sets: 2-electrodes – 900865 3-electrodes – 900866 5-electrodes – 900867 Accessories: USB Cable – 900826 Stingray Adapter – 900809 Chest Strap – 900810 Docking Station – VP00489 Fast-Fix Electrode – 900811 More information concerning device and use can be found from eMotion Faros Series Manual. Manual is included on Faros Sensor memory in PDF-format. Before operating the eMotion Faros, please read the manual thoroughly and retain it for future reference. 2 FAROS SENSOR USB-connector Pushbutton Blue Indicator Orange Indicator Battery States Notification Green Indicator Red Indicator Measurement and PC Error States connection States BEFORE USE CHARGE THE BATTERY. Use the delivered USB cable to connect the sensor to your computer. • Plug the USB Cable to your computer • Plug other end to your Faros Sensor • Blue light indicator starts to blink • Blue light indicator is lit when battery is fully charged Recommended recharge time is 1.5 hours. After recharging un-plug the USB-Cable from Faros and Computer. 3 MEASUREMENT PREPARATION With eMotion Faros Manager software you can manage data acquistion configuration. eMotion Faros Device Manager Overview • Connect your eMotion Faros Sensor to computer • Browse to FAROS_xxx hard drive and open the Software folder. Open Manager folder and run “eMotionFarosManager.exe” • Synchronize sensor time and set the configuration which you want to use for data acquisition • When you are ready click ‘Save’ button to apply settings • Click ‘Close’ to exit application Sensor records data on internal memory or communicates remotely with Bluetooth enabled device. Bluetooth communication is available on Faros 180 and 360 models only. 4 MEASUREMENT PREPARATION Faros default configuration is Datalogger mode. Manager configuration options are showed based on your Faros sensor model. 5 PERFORMING MEASUREMENT The eMotion Faros ECG Sensor has one pushbutton. The device starts when you push the button. Green LED indicates the measuring mode. The device shuts down when you push the button continuously for 5 seconds. Wear your applied part according to illustrations below. Connect your Faros sensor and start measurement. 1. Faros with Cable Set 2. Faros with Chest Strap and Stingray 3. Faros with Fast-Fix Electrode Full electrode and sensor placement pictures are available on eMotion Faros Series Manual which is located on the device memory as PDF file. 6 REVIEWING MEASUREMENT EDF data can be reviewed using eMotion EDF Viewer software. Application is located on Faros Sensor’s internal memory. eMotion EDF Viewer can be used without installation from Faros internal memory or it can be installed on computer. Installation is recommended. Open eMotion EDF Viewer 1. Connect your Faros Sensor to computer using USB Cable 2. Browse to FAROS_xxx hard drive and Software Folder 3. Open eMotion EDF Viewer and run the application Review measurement data 1. Click ‘Open EDF’ in main view 2. Select FAROS_xxx hard drive and open “DATA” folder 3. Folder names indicate the date of performed measurement 4. Select desired measurement and .edf-file and click ‘Open’ Selected data appears on eMotion EDF Viewer. Data can be reviewed using scrollbar or arrow buttons on keyboard. 7 REVIEWING MEASUREMENT Data window presents the recorded ECG data. Possible events are shown in data. Info window contains Faros sensor configuration which was used in measurement. Duration, start and end time are presented. Manually created event(s) are listed in the Events window. An event report can be created from selected patient events by clicking the Event report button. 8 SAFE AND EFFECTIVE USE eMotion Faros ECG sensor doesn’t require any particular maintenance procedure except recharging the battery. For a correct functioning please follow these simple precautions: • Handle this device carefully • Store the device away from dusty or dirty areas • Keep the device away from moisture or extreme temperature • Disconnect Cable Set from Sensor when device is unused • Connect Cable Set only to Faros Sensor • Do not disassemble Faros Sensor or accessories • If a problem occurs use pushbutton to reset the device • For disinfection use non-fluffing cloth dampened in non-alcoholic disinfection fluid or non-alcoholic cleaning and disinfection wipes for medical devices, such as mikrozid® sensitive wipes Do not try to repair, or modify the sensor. If you cannot solve the problem of the device, please contact mega@megaemg.com for support. 9 TROUBLESHOOTING Device does not start measurement (error light indicator blinks three (3) times) • Recharge the sensor • Synchronize device clock via Faros Manager Software • Save settings To reset the device • Push the pushbutton until all light indicators flash eMotion Faros Series Manual can be found from your Faros Sensor memory. Before operating the eMotion Faros, please read the manual thoroughly and retain it for future reference. If a problem occurs, contact us. Contact information presented on last page. 10 FAQ How can I change the measurement modes of the device? Go to the device hard drive Faros XXX (XXX is model, 90, 180 or 360). From this hard drive, you can find the Faros Manager software with which you are able to change the measurement settings. For further information on how to use Faros Manager, please see eMotion Faros Series Manual, chapter 3 My Faros sensor does not start, what might cause this problem? It is important to remember that eMotion Faros sensor uses the energy of the battery also when it is on standby mode (“power off” mode). For example, the device’s inner clock uses the battery also when it is turned off to keep up with the time. This is why we recommend you to recharge the sensor before every measurement, or at least when the sensor has been on standby mode for several days. 11 CONTACT Mega Electronics Ltd Pioneerinkatu 6 70800 Kuopio, Finland Phone +358 (0)17 581 7700 Fax +358 (0)17 580 0978 Email mega@megaemg.com Website www.megaemg.com 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27 Create Date : 2015:10:29 09:58:59+02:00 Metadata Date : 2015:10:29 09:59:03+02:00 Modify Date : 2015:10:29 09:59:03+02:00 Creator Tool : Adobe InDesign CS6 (Windows) Instance ID : uuid:19982c68-8146-4374-87bc-0ac07e99542c Original Document ID : xmp.did:CF3ECCDF146FE511B858A5CCDBA24F15 Document ID : xmp.id:603B71E9127EE5119E5B8092F3C081C4 Rendition Class : proof:pdf Version ID : 1 Derived From Instance ID : xmp.iid:815389CDBF77E511835FDB7C9C3979C9 Derived From Document ID : xmp.did:2C397B4FA171E511BF4097AD1445B3A8 Derived From Original Document ID: xmp.did:CF3ECCDF146FE511B858A5CCDBA24F15 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CS6 (Windows) History Changed : / History When : 2015:10:29 09:58:59+02:00 Format : application/pdf Title : 800764-1.3 Faros Quick Guide.indd Producer : Adobe PDF Library 10.0.1 Trapped : False GTS PDFX Version : PDF/X-4 Page Count : 12 Creator : Adobe InDesign CS6 (Windows)EXIF Metadata provided by EXIF.tools