WE261 E 96022000801 442476_r1 !!

Preview ! 96022000801 Weed Eater Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection

User Manual: !! Weed Eater Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection

Open the PDF directly: View PDF .
Page Count: 13

Download
Open PDF In Browser	View PDF

Operator’s Manual
26" RIDING MOWER
SIDE DISCHARGE
ELECTRIC START

BAGGER = 960730027
MULCH KIT = MK26

PARTS AND SERVICE
This product has been expertly engineered and carefully manufactured to rigid quality standards. As with all
mechanical products, some adjustments or part replacement may be necessary during the life of your unit.

For Parts and service, contact our authorized distributor: call 1-800-849-1297
•

For replacement parts, have available the following information:
a.

Model Number/Manufacturer's I.D. Number

Description of part.

For Technical Assistance: call 1-800-829-5886
For a Parts Manual, go to our website: www.weedeater.com

NOTE:

HOP provides parts and service through its authorized distributors and dealers; therefore,
all requests for parts and service should be directed to your local dealer(s). The philosophy
of HOP is to continually improve all of its products. If the operating characteristics or the
appearance of your product differs from those described in this Manual, please contact
your local dealer for updated information and assistance.

Catalog No.

WE261

IMPORTANT:
Read and follow all Safety
Rules and Instructions before
op er at ing this equipment.
Patents Pending

Gasoline containing up to 10% ethanol (E10) is acceptable for use in this
machine. The use of any gasoline exceeding 10% ethanol (E10) will void the
product warranty.

02.21.11 BAD

Printed in the U.S.A.

532 44 24-76 Rev. 1

RIDING MOWER

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

DECALS

SAFETY RULES
DANGER: This cutting machine is capable of amputating hands and feet and throwing
objects. Failure to observe the following safety instructions could result in serious
injury or death.

7
8
4
6

2 3

• Never direct discharged material toward
anyone. Avoid discharging material
against a wall or obstruction. Material may
ricochet back toward the operator. Stop the
blade when crossing gravel surfaces.
• Do not operate machine without the entire
grass catcher, discharge chute, or other
safety devices in place and working.
• Slow down before turning.
• Never leave a running machine unattended. Always turn off blade, set parking brake, stop engine, and remove keys
before dismounting.
• Disengage blade when not mowing. Shut
off engine and wait for all parts to come
to a complete stop before cleaning the
machine, removing the grass catcher, or
unclogging the discharge chute.
• Operate machine only in daylight or good
artificial light.
• Do not operate the machine while under
the influence of alcohol or drugs.
• Watch for traffic when operating near or
crossing roadways.
• Use extra care when loading or unloading
the machine into a trailer or truck.
• Always wear eye protection when operating machine.
• Data indicates that operators, age 60
years and above, are involved in a large
percentage of riding mower-related injuries. These operators should evaluate
their ability to operate the riding mower
safely enough to protect themselves and
others from serious injury.
• Keep machine free of grass , leaves or
other debris build-up which can touch hot
exhaust / engine parts and burn. Do not
allow the mower deck to plow leaves or
other debris which can cause build-up to
occur. Clean any oil or fuel spillage before
operating or storing the machine. Allow
machine to cool before storage.

WARNING: In order to prevent accidental starting when setting up, transporting,
adjusting or making repairs, always disconnect spark plug wire and place wire where
it cannot contact spark plug.
WARNING: Do not coast down a hill in
neutral, you may lose control of the riding
mower.
WARNING: Engine exhaust, some of its
constituents, and certain vehicle components
contain or emit chemicals known to the State
of California to cause cancer and birth defects
or other reproductive harm.
WARNING:This unit is not intended for
towing, or use of wheel weights. Only use
attachments designed specifically for this
riding mower.
WARNING: Battery posts, terminals and
related accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and birth defects
or other reproductive harm. Wash hands
after handling.

I. GENERAL OPERATION
KEY PART
NO. NO.

DESCRIPTION

1
2
3
4
6
7
8
9
----

DECAL, STEERING WHEEL
DECAL, V-BELT SCH 30"
DECAL, WARN. DEFLECT/CTFGR
DECAL, DECK/DEFLECTOR
DECAL
DECAL, WARNING
DECAL, WARNING SPARK ARRESTOR
DECAL, LRV STEERING BRKT.
DECAL, BYPASS
MANUAL OPERATOR ENGLISH
MANUAL OPERATOR SPANISH

532 43 05-88
532 43 35-96
532 42 51-13
532 44 07-79
532 43 67-55
532 43 44-57
532 42 41-02
532 43 73-12
532 43 24-79
532 44 24-76
532 44 24-77

NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

• Read, understand, and follow all instructions on the machine and in the manual
before starting.
• Do not put hands or feet near rotating
parts or under the machine. Keep clear
of the discharge opening at all times.
• Only allow responsible adults, who are
familiar with the instructions, to operate
the machine.
• Clear the area of objects such as rocks,
toys, wire, etc., which could be picked up
and thrown by the blade.
• Be sure the area is clear of bystanders
before operating. Stop machine if anyone
enters the area.
• Never carry passengers.
• Do not mow in reverse unless absolutely
necessary. Always look down and behind
before and while backing.

SAFETY RULES

II. SLOPE OPERATION

III. CHILDREN

Slopes are a major factor related to loss of
control and tip-over accidents, which can
result in severe injury or death. Operation
on all slopes requires extra caution. If you
cannot back up the slope or if you feel uneasy
on it, do not mow it.
• Mow up and down slopes (15° Max), not
across.
• Watch for holes, ruts, bumps, rocks, or
other hidden objects. Uneven terrain could
overturn the machine. Tall grass can hide
obstacles.
• Choose a low ground speed so that you
will not have to stop or shift while on the
slope.
• Do not mow on wet grass. Tires may lose
traction.
• Always keep the machine in gear when
going down slopes. Do not shift to neutral
and coast downhill.
• If machine stops while going uphill,
disengage blade, shift into reverse and
back down slowly.
• Avoid starting, stopping, or turning on a
slope. If the tires lose traction, disengage
the blade and proceed slowly straight down
the slope.
• Keep all movement on the slopes slow and
gradual. Do not make sudden changes
in speed or direction, which could cause
the machine to roll over.
• Use extra care while operating machine
with grass catchers or other attachments;
they can affect the stability of the machine.
• Do no use on steep slopes.
• Do not try to stabilize the machine by
putting your foot on the ground.
• Do not mow near drop-offs, ditches, or
embankments. The machine could suddenly roll over if a wheel is over the edge
or if the edge caves in.

Tragic accidents can occur if the operator
is not alert to the presence of children.
Children are often attracted to the machine
and the mowing activity. Never assume
that children will remain where you last
saw them.
• Keep children out of the mowing area and
in the watchful care of a responsible adult
other than the operator.
• Be alert and turn machine off if a child
enters the area.
• Before and while backing, look behind and
down for small children.
• Never carry children, even with the blade
shut off. They may fall off and be seriously
injured or interfere with safe machine
operation. Children who have been given
rides in the past may suddenly appear in
the mowing area for another ride and be run
over or backed over by the machine.
• Never allow children to operate the machine.
• Use extra care when approaching blind
corners, shrubs, trees, or other objects
that may block your view of a child.

IV. SERVICE
SAFE HANDLING OF GASOLINE

To avoid personal injury or property damage, use extreme care in handling gasoline.
Gasoline is extremely flammable and the
vapors are explosive.
• Extinguish all cigarettes, cigars, pipes,
and other sources of ignition.
• Use only approved gasoline container.
• Never remove gas cap or add fuel with
the engine running. Allow engine to cool
before refueling.
• Never fuel the machine indoors.
• Never store the machine or fuel container
where there is an open flame, spark, or
pilot light such as on a water heater or
other appliances.

RIDING MOWER

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

MOWER DECK

KEY PART
NO. NO.

DESCRIPTION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
47
48
49
50
51
52

DECK, 26"
MANDREL ASM
KEEPER, BELT
PULLEY, MANDREL
BELT
COVER, MANDREL
LIFT ASM, DECK
LINK, DECK LIFT
LINK, ADJUSTABLE
DEFLECTOR
SUPPORT, DEFLECTOR
ROD, HINGE
SPRING, TORSION
ARM, MOWER SUPPORT
NUT, LOCK
STUD
WASHER
PIN
BOLT, SHOULDER
PIN
WASHER, 17/32 X 1 3/16
LINK, DECK
NUT, LCK 3/8-16
SPRING, DECK
PIN
SPACER, MANDREL
BOLT, MANDREL
NUT, LOCK
BLADE
BOLT, BLADE
PULLEY, IDLER
GUARD, IDLER
KEEPER, BELT IDLER
BOLT, 3/8-16 X 1 1/2
ARM, BRAKE
SCREW, 1/4-20 X 5/8
NUT, 3/8-16 FLANGE
ARM, IDLER
BOLT, 5/16-18 X 1/2
WASHER, 16 GA.
CAP, SLEEVE
NUT, PUSH
GRIP, HANDLE
PLUNGER
PIN
BUTTON PLUNGER
KEEPER BELT
SPACER RETAINER
SCREW 3/8-16 X 1
BUMPER
SCREW 3/8-16 X 1/2

532 42 81-93
532 19 28-70
532 43 25-20
532 43 25-94
532 42 85-78
532 42 82-42
532 42 93-95
532 42 91-95
532 42 93-97
532 43 89-23
532 42 89-68
532 13 14-91
532 19 70-26
532 41 88-63
873 90 05-00
532 19 51-61
819 19 19-12
532 19 42-09
532 19 65-39
532 19 42-08
819 17 19-12
532 42 93-50
873 90 06-00
532 42 95-31
532 12 47-88
532 18 76-90
532 17 39-84
532 40 02-34
532 42 85-00
532 19 30-03
532 19 31-97
532 14 10-43
532 19 34-14
872 11 06-12
532 19 94-70
532 13 77-29
873 90 06-00
532 42 84-35
817 49 05-08
819 17 16-16
532 10 53-04
532 11 04-52
532 12 56-31
532 42 94-01
532 10 57-67
532 12 45-26
532 43 86-10
532 19 90-92
817 00 06-16
532 40 47-42
817 67 06-08

NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

RIDING MOWER

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

MOWER DECK

47
44
43

7
45
37
39
21
20
36
19

39
8
17

6
36

35
4

27
10

38
27
26

• Never fill containers inside a vehicle or
on a truck or trailer bed with plastic liner.
Always place containers on the ground
away from your vehicle when filling.
• Remove gas-powered equipment from the
truck or trailer and refuel it on the ground.
If this is not possible, then refuel such
equipment with a portable container, rather
than from a gasoline dispenser nozzle.
• Keep the nozzle in contact with the rim
of the fuel tank or container opening at
all times until fueling is complete. Do not
use a nozzle lock-open device.
• If fuel is spilled on clothing, change clothing
immediately.
• Never overfill fuel tank. Replace gas cap
and tighten securely.

• If you strike a foreign object, stop and
inspect the machine. Repair, if necessary,
before restarting.
• Never make any adjustments or repairs
with the engine running.
• Check grass catcher components and the
discharge chute frequently and replace
with manufacturer’s recommended parts,
when necessary.
• Mower blade is sharp. Wrap the blade or
wear gloves, and use extra caution when
servicing them.
• Check brake operation frequently. Adjust
and service as required.
• Maintain or replace safety and instruction
labels, as necessary.
• Be sure the area is clear of bystanders
before operating. Stop machine if anyone
enters the area.
• Never carry passengers.
• Do not mow in reverse unless absolutely
necessary. Always look down and behind
before and while backing.

GENERAL SERVICE

SAFETY RULES

• Never operate machine in a closed area.
• Keep all nuts and bolts tight to be sure the
equipment is in safe working condition.
• Never tamper with safety devices. Check
their proper operation regularly.
• Keep machine free of grass, leaves, or
other debris build-up. Clean oil or fuel spillage and remove any fuel-soaked debris.
Allow machine to cool before storing.

2
11
41

13
24

12
42

23
52

18
17

15
16
14

LRV-A_Deck_5

21
16
17

29
30

RIDING MOWER

PRODUCT SPECIFICATIONS

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

STEERING

CUSTOMER RESPONSIBILITIES

Gasoline Capacity
and Type:
Oil Type
(API-SG-SL):
Oil Capacity:
Spark Plug:

1.2 qt.
Unleaded Regular
SAE 30 (above 32°F)
SAE 5W-30(below 32°F)
20 oz.
Champion RC12YC
(Gap: .030")
Ground Speed
Forward: 0-4 mph
Reverse: 0-1 mph
Blade Bolt Torque: 45-55 Ft. Lbs.

• Read and observe the safety rules.
• Follow a regular schedule in maintaining,
caring for and using your riding mower.
• Follow the instructions under “Maintenance” and “Storage” sections of this
owner’s manual.
WARNING: This riding mower is
equipped with an internal combustion engine and should not be used on or near any
unimproved forest-covered, brush-covered
or grass-covered land unless the engine’s
exhaust system is equipped with a spark
arrester meeting applicable local or state
laws (if any). If a spark arrester is used, it
should be maintained in effective working
order by the operator.
In the state of California the above is required
by law (Section 4442 of the California Public
Resources Code). Other states may have
similar laws. Federal laws apply on federal
lands. A spark arrester for the muffler is
available through your nearest authorized
service center.

UNASSEMBLED PARTS

ª,ARGEª&LATª7ASHER
3TEERINGª7HEELª)NSERT
3TEERINGª7HEEL

KEY PART
NO. NO.

DESCRIPTION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31

WHEEL ASM (FRONT)
E-CLIP
WASHER, HARDENED
WASHER, 1/4 X 3/4
SPINDLE, RH
WASHER, HARDENED THRUST
BUSHING, STEERING COLUMN
PIN, 5/64 X 3/4 COTTER
WASHER
WELDMENT, LWR STRG SHAFT
LINK, STRNG LH
LINK, STRNG RH
BOLT, 5/16-18 X 1 1/2
WASHER
NUT, 5/16-18
BUSHING, STEERING SNAP
SUPPORT, UPPER STEERING
BUSHING, UPPER STEERING
BOLT, 5/16-18 X 3/4
CLIP, RETAINER SPRING
COVER, STEERING COLUMN
SHAFT, STEERING
ADAPTER, STEERING WHEEL
WASHER, 9/16 X 2 3/8 12 GA.
NUT, JAM LOCK 1/2-20
WHEEL, STEERING
CAP, STEERING WHEEL
CLIP, RETAINER SPRING
SPINDLE, LH
CAP, HUB, AXLE
WASHER 1-1/16 X 2 X 10 GA

532 43 65-00
812 00 00-01
532 18 89-67
532 12 17-49
532 43 53-24
532 12 49-31
532 12 49-37
532 42 10-76
819 13 14-14
532 42 80-57
532 42 80-35
532 42 80-36
874 78 05-24
819 13 10-16
873 80 05-00
532 42 80-44
532 42 82-52
532 07 67-15
817 00 05-12
532 42 80-45
532 42 83-47
532 42 82-13
532 43 77-47
819 18 38-12
873 94 08-00
532 44 16-14
532 44 16-15
532 19 98-49
532 43 53-23
532 43 64-99
819 34 32-10

ª ª*AMª.UT
NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

ª0IN
ªª&LATª7ASHER

ª ª,OCKª.UT

3TEERINGª7HEELª!DAPTER
3TEERINGª#OVER

ª ªXªªª
(EXª"OLT

3TEERINGª
3HAFTª#OVER
3TEERINGª3HAFTª

ª7ASHER
ª+EY
3EAT

3LOPEª3HEET

ª+NOB

RIDING MOWER

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

STEERING

27
25
24
26

14
10
20

12
8

Steering Shaft

9
31

2
6

7
30

Plastic Cover

6. Remove steering wheel adapter from
steering wheel and slide adapter onto
steering shaft.
7. Press steering wheel into position on
shaft, install large washer, and tighten
nut securely.
8. Snap steering wheel insert into center of
steering wheel securely.
INSTALL SEAT
1. Pivot seat upward and remove from the
cardboard packing. Remove the cardboard packing and discard.
2. Place seat on seat pan so head of shoulder bolt is positioned over large slotted
hole in pan.
3. Push down on seat to engage shoulder
bolt in slot and pull seat towards rear of
riding mower.

1. Insert steering shaft into mount and securely fasten with bolt, washer, and nut
provided.
2. Insert pin into hole in steering shaft.
3. Slide plastic cover over steering shaft
and into position.

Steering Shaft

HOW TO SET UP YOUR RIDING
MOWER
INSTALL STEERING COLUMN

Foam Cover

UNPACK CARTON
1. Cut along dotted lines on all four panels
of carton. Remove carton and top frame
as one unit.
2. Remove packing materials from riding
mower.
NOTE: Only cut carton with a short blade
utility knife, a long blade or saw can puncture
tires on unit.

Your new riding mower has been assembled at the factory with the exception of those
parts left unassembled for shipping purposes. To ensure safe and proper operation of your
riding mower all parts and hardware you assemble must be tightened securely. Use the
correct tools as necessary to insure proper tightness.
TOOLS REQUIRED FOR ASSEMBLY 4. Slide steering shaft protective foam cover
over shaft.
A socket wrench set will make assembly
easier. Standard wrench sizes you need 5. Position front wheels of the riding mower
so they are pointing straight forward.
are listed below.
(1) 3/4" wrench
Insert
Nut
(1) 1/2" wrench
(1) Utility knife
Steering Wheel
Washer
(1) Tire pressure gauge
When right or left hand is mentioned in
this manual, it means when you are in the
Adapter
operating position (seated behind the steering wheel).

TO REMOVE RIDING MOWER FROM
CARTON

ASSEMBLY/PRE-OPERATION

8
7

4
1

5
29

Nut

Washer

Steering
Shaft
Mount

Seat

Bolt

Seat Pan

LRV-A_Steering_1_r4
1

6
46
02

Shoulder
Bolt

4. Pivot seat and pan forward and assemble
adjustment knob and flat washer loosely.
Do not tighten.

WARNING: Before starting, read, understand and follow all instructions in the
Operation section of this manual. Be sure
riding mower is in a well-ventilated area.
Be sure the area in front of riding mower is
clear of other people and objects.

TO ROLL RIDING MOWER OFF
SKID (See Operation section for
location and function of controls)

Flat Washer

1. Raise deck lift lever to its highest
position.
2. Release parking brake by depressing
clutch/brake pedal.
3. Engage freewheel control. See “TO
TRANSPORT” in the operation section
of this manual.
4. Roll riding mower forward off skid.

02464

Adjustment Knob

5. Lower seat into operating position and
sit in seat.
6. Slide seat until a comfortable position is
reached which allows you to press clutch/
brake pedal all the way down.
7. Get off seat without moving its adjusted
position.
8. Raise seat and tighten adjustment knob
securely.

CHECK TIRE PRESSURE

The tires on your riding mower were
overinflated at the factory for shipping purposes. Correct tire pressure is important
for best cutting performance.
• Reduce tire pressure to PSI shown on
tires.

CHECK BATTERY
Make sure battery is securely fastened,
and that all wires are securely connected.
• Battery is located under the seat.
• Battery has been fully charged from the
factory, before installation.

CHECK DECK LEVELNESS

For best cutting results, mower housing
should be properly leveled. See “TO LEVEL
MOWER HOUSING” in the Service and
Adjustments section of this manual.

Seat

CHECK FOR PROPER POSITON OF
MOWER DRIVE BELT
See the figure that is shown for replacing
the mower drive belt in the service and
adjustment section of this manual. Verify
that the belt is routed correctly.

CHECK BRAKE SYSTEM

After you learn how to operate your riding mower, check to see that the brake
is operating properly. See “TO ADJUST
BRAKE” in the Service and Adjustments
section of this manual.

Battery

RIDING MOWER
DRIVE

KEY PART
NO. NO.
-1
2
3
4
5
6
7

532 43 61-44
532 43 64-98
532 12 17-48
812 00 00-01
532 12 35-83
532 42 79-39
532 42 80-69
532 42 78-73

8
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39

812 10 00-09
532 42 88-76
532 00 13-70
532 43 06-45
532 43 08-45
532 43 85-68
532 12 47-93
532 42 79-26
532 43 72-81
532 42 47-59
532 43 08-70
532 42 79-97
532 42 80-77
532 42 80-76
532 43 13-74
532 42 79-95
532 42 83-03
532 42 98-16
532 42 90-53
532 42 83-02
532 17 48-40
532 18 39-00
532 42 90-55
532 42 84-64
532 42 84-61
532 42 84-62
532 41 15-55
872 11 04-06
873 80 04-00
532 16 54-92
874 78 04-12

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

KEY PART
NO. NO.

DESCRIPTION
SERVICE KIT, TRANSAXLE
WHEEL ASM (REAR)
WASHER, 16 GA.
E-CLIP
KEY. SQUARE
WELDMENT. DRIVE AXLE
CHAIN DRIVE
SPROCKET. 9 TOOTH
SPLINED
RING, SNAP
DIFFERENTIAL ASM
WASHER, THRUST
CHAIN, PRIMARY DRIVE
BUSHING
BRACKET, CARRIER
BEARING ASM
SHAFT INPUT
WHEEL, FRICTION A5M
ARM, SHIFT
ROD, BYPASS
BRACE CARRIER REAR
SPRING, CARRIER
SPRING, BRAKE
SPRING, BYPASS
BRACE CARRIER BOX
LINK, SHIFT
ARM. CLUTCH
WELDMENT SHIFT LEVER
SUPPORT, SHIFT LEVER
WASHER, NYLON
HUB SHIFT LEVER
SPACER, NYLON
MNTG BRKT. SHIFT ARM
BRACKET, SHIFTER FLEX
TUBE SHIFT ARM
GRIP, HANDLE
BOLT, CARRIAGE - 114-20 X 3/4
NUT NYLON LOCK 114-20
BOLT, SHOULDER
BOLT, 1/4-20 X 3/4

810 04 04-00
819 09 12-10
532 16 60-02
873 68 04-00
817 49 04-36
819 09 10-16
817 49 04-20
532 43 02-49
532 43 02-45
532 42 80-21
532 43 02-47
532 42 80-78
877 01 08-10
532 42 80-19
532 42 80-17
532 43 52-53
532 42 80-16
532 12 47-88
817 49 05-08
532 43 55-59
532 42 79-45
532 42 96-78
877 10 08-12
876 02 02-08
532 42 93-25
532 42 96-94
532 42 96-93
817 49 04-06
532 42 80-70
817 00 05-12
532 43 64-99
812 00 00-02
532 42 95-19

74
75

532 43 78-41
532 43 34-95

DESCRIPTION
WASHER, LOCK
WASHER FLAT
WASHER, SERRATED
NUT, CROWN LOCK 114-20
SCREW 1/4-20 X 2 114
WASHER
SCREW, 1/4-20 X 1 1/2
PLATE BRAKE ANTI - ROTATE
SPRING, BRAKE RETURN
ARM, BRAKE
SPACER RETURN
CALIPER, BRAKE ASM
PIN, DOWEL 1/4
PLATE, BRAKE PAD
PUCK BRAKE
ROTOR, BRAKE
CAP, BRAKE CALIPER
PIN, RETAINER
BOLT, 5/16-16 X 112
CABLE, BRAKE
WELDMENT, PEDAL
ROD, PARKING BRAKE
PIN, .25 X .75 CLEVIS
PIN, 1/16 DIA. COTTER
BRACKET, BRAKE SUPPORT
COVER PEDAL
COVER, BRAKE PEDAL
SCREW, 1/4-20 X 3/8
BRAKE CABLE MOUNT
BOLT, 5/16-18 X 3/4
CAP HUB AXLE
E RING #5133-62
SPROCKET II TOOTH
SPLINED
TENSION LRV CHAIN
SPROCKET IDLER

NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

NOTE: You may now roll your riding
mower off the skid. Follow the appropriate
instruction below to remove the riding mower
from the skid.

40
41
42
43
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73

RIDING MOWER

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

DRIVE

61
63
68

64
58

62
66

24
58
25
70

72
7

64
70
11

36
27

31
14

43
75

3
70

29
14
13

3
15

11
10
70

5
20

57
53

70
38 24

4
1

37
42
40

2
6

34
70

52
50

22
70

47
46
37 8

59
71

5
4

LRV-A_Drive_3

✓CHECKLIST

Before you operate your new riding mower,
we wish to assure that you receive the best
performance and satisfaction from this
Quality Product.
Please review the following checklist:
✓ All assembly instructions have been
completed.
✓ No remaining loose parts in carton.
✓ Battery is properly connected.
✓ Seat is adjusted comfortably and tightened securely.
✓ All tires are properly inflated. (For shipping purposes, the tires were overinflated
at the factory).
✓ Be sure mower deck is properly leveled
side-to-side/front-to-rear for best cutting
results. (Tires must be properly inflated
for leveling).
✓ Check mower belt. Be sure it is routed
properly around pulleys and inside all belt
keepers.
✓ Check wiring. See that all connections
are still secure and wires are properly
clamped.
✓ Before driving riding mower, be sure freewheel control is in “transmission engaged”
position (see “TO TRANSPORT” in the
Operation section of this manual).
While learning how to use your riding mower,
pay extra attention to the following important
items:
✓ Engine oil is at proper level.
✓ Fuel tank is filled with fresh, clean, regular
unleaded gasoline.
✓ Become familiar with all controls, their
location and function. Operate them
before you start the engine.
✓ Be sure brake system is in safe operating
condition.
✓ Be sure Operator Presence System and
Reverse Operation System (ROS) are
working properly (See the Operation and
Maintenance sections in this manual).

RIDING MOWER

OPERATION

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

CHASSIS

These symbols may appear on your riding mower or in literature supplied with the product. Learn and understand their meaning.

REVERSE

NEUTRAL

HIGH

LOW

CHOKE

FAST

SLOW
IGNITION SWITCH

ENGINE OFF

REVERSE
OPERATION
SYSTEM (ROS)

OVER TEMP
LIGHT

FUEL

ENGINE ON

OIL PRESSURE

ENGINE START

BATTERY

PARKING BRAKE

REVERSE

FORWARD

PARKING BRAKE
LOCKED

MOWER HEIGHT

PARKING BRAKE
UNLOCKED

MOWER LIFT

ATTACHMENT
CLUTCH ENGAGED

ATTACHMENT
CLUTCH DISENGAGED

FREEWHEEL CONTROL
DISENGAGED

BRAKE/CLUTCH
PEDAL

DANGER, KEEP HANDS
AND FEET AWAY

SLOPE HAZARDS
KEEP AREA CLEAR
(SEE SAFETY RULES SECTION)

DANGER indicates a hazard which, if not avoided,
will result in death or serious injury.
WARNING indicates a hazard which, if not avoided,
could result in death or serious injury.

FREEWHEEL CONTROL
ENGAGED

Failure to follow instructions
could result in serious injury or
death. The safety alert symbol
is used to identify safety information about hazards which can
result in death, serious injury
and/or property damage.

CAUTION indicates a hazard which, if not avoided,
might result in minor or moderate injury.
CAUTION when used without the alert symbol,
indicates a situation that could result in damage
to the tractor and/or engine.
HOT SURFACES indicates a hazard which,
if not avoided, could result in death, serious injury
and/or property damage.
FIRE indicates a hazard which, if not avoided,
could result in death, serious injury and/or
property damage.

KEY PART
NO. NO.

DESCRIPTION

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
51
52

WELDMENT, CHASSIS
SUPPORT, AXEL LH
SUPPORT, AXEL RH
SHIELD, TRANSAXLE FRONT
BRACE, AXLE CROSS
COVER, FRICTION DRIVE
PLATE, ENGINE
BRACKET, CHASSIS FRONT
BRACKET, STEERING SUPPORT
PAN, SEAT
BRACKET, SWITCH MOUNTING
BOOT, DUST
COVER, FOOT REST
STRUCTURE, FOOT REST
SUPPORT, FOOT REST
FENDER, CONTROL
GUARD, ENGINE
ENGINE, (NON-CALIFORNIA) 12S907-2411-B1
KEEPER, BELT
BRACKET, BATTERY
LEVER, SWITCH
DECK CLUTCH ASM
KNOB
SCREW, NO. 10
BOLT, CARRIAGE 1/4-20 X 3
NUT, 1/4-20
SPACER, ENGINE
DISC, FRICTION ASM
BOLT, SCKT HD 3/8-24 X 1 .25
BEARING
SPACER, NEUTRAL
BOLT, HEX WSH HD 5/16-18 X 3/8
SPRING, SEAT
SPRING
BOLT, 1/4-20 X 1 1/2
BOLT, SHOULDER
WASHER, 17/32 X 1 3/16
KNOB, SEAT
SPACER
BUSHING, NYLON SNAP
NUT, LOCK
BOLT, 5/16-18 SHOULDER
NUT, 5/16-18
SEAT
BOLT, 5/16-18 X 3/4
BOLT, 5/16-18 X 1/2
SCREW
BEARING, FLANGE, BALL
SCREW, 5/16-18 X1
BOLT, SHOULDER, 5/16-18 X .561
CLIP PUSH-IN HINGED

532 42 80-48
532 42 82-47
532 42 82-44
532 42 83-46
532 42 81-10
532 42 81-09
532 42 80-40
532 42 85-76
532 42 88-56
532 19 55-30
532 17 46-48
532 42 82-48
532 43 64-96
532 42 82-50
532 42 82-49
532 43 64-97
532 42 83-48
532 43 81-54
532 42 89-86
532 42 80-46
532 42 98-15
532 42 88-26
532 14 98-46
532 41 63-58
872 14 04-24
873 51 04-00
532 43 00-87
532 42 83-01
532 43 08-17
532 43 04-70
532 43 73-22
817 49 05-06
532 12 41-81
532 12 12-50
872 05 04-12
532 12 70-18
819 17 19-12
532 16 63-69
532 13 43-00
532 12 12-48
532 12 39-76
532 17 18-52
873 80 05-00
532 42 82-43
817 00 05-12
817 49 05-08
532 08 67-77
532 40 89-81
817 06 05-16
532 16 54-92
532 14 50-06

NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

RIDING MOWER

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

CHASSIS

KNOW YOUR RIDING MOWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING
YOUR RIDING MOWER
Compare the illustrations with your riding mower to familiarize yourself with the locations
of various controls and adjustments. Save this manual for future reference.

Parking
Brake
Pedal

Brake Pedal
35
36

ROS
"ON"

42
52

43
52

42
37

41
49

Ignition
Switch

Lift Lever
Plunger

Motion
Control
Lever

Deck Clutch
Lever

29
30

17
28

16
24

Height
Adjustment
Lever

Freewheel Control

19
46

20
45
46

6
21

Our riding mowers conform to the applicable safety standards of the
American National Standards Institute.

45
9
15
23

LRV-A_Chassis_3

51
45

4
22

PARKING BRAKE LEVER - Locks parking brake into brake position.
MOTION CONTROL LEVER - Selects the
speed and direction of the riding mower.
FREEWHEEL CONTROL - Disengages
transmission for pushing or slowly towing
the riding mower with the engine off.
ROS “ON” POSITION - Allows operation
of mower deck or other powered attachment while in reverse.

DECK CLUTCH LEVER - Used to engage
the mower blade.
BRAKE PEDAL - Used for braking the riding mower and starting the engine.
HEIGHT ADJUSTMENT LEVER - Used to
adjust mower cutting height.
IGNITION SWITCH - Used for starting and
stopping the engine.
LIFT LEVER PLUNGER - Used to release
height adjustment lever when changing its
position.

00155

The operation of any riding mower can result in foreign objects thrown
into the eyes, which can result in severe eye damage. Always wear
safety glasses or eye shields while operating your riding mower or
performing any adjustments or repairs. We recommend a wide vision
safety mask over spectacles or standard safety glasses.

HOW TO USE YOUR RIDING
MOWER

Motion
Control
Lever

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

ELECTRICAL

NOTE: Under certain conditions when riding
mower is standing idle with the engine running, hot engine exhaust gases may cause
“browning” of grass. To eliminate this possibility, always stop engine when stopping
riding mower on grass areas.

TO SET PARKING BRAKE
Your riding mower is equipped with an operator presence sensing switch. When engine
is running, any attempt by the operator to
leave the seat without first setting the parking
brake will shut off the engine.
1. Depress brake pedal all the way down
and hold.
2. Depress parking brake lever and release
pressure from brake pedal. Pedal should
remain in brake position. Make sure
parking brake will hold riding mower
secure.
Pa r k i n g B r a k e
Pedal-Push Down
to "Engage"

RIDING MOWER

CAUTION: Always stop riding mower
completely, as described above, before
leaving the operator's position.
TO MOVE FORWARD AND BACKWARD
The direction and speed of movement is
controlled by the motion control lever.
1. Start riding mower with clutch/brake pedal
depressed and motion control lever in
neutral (N) position.
2. Move motion control lever to desired
position.
3. Slowly release clutch/brake pedal to start
movement.
IMPORTANT: Bring riding mower to a complete stop before shifting or changing gears.
Failure to do so will shorten the useful life of
your transaxle.

Mower Height
Adjustment

Deck Clutch
Lever
Brake Pedal
"Disengaged"
"Engaged"
Position
Deck Clutch
Position
Brake Pedal
Lever
"Drive"
"Engaged"
Position
Position

STOPPING
MOWER BLADE • To stop mower blade, move deck clutch
lever to disengaged position.
GROUND DRIVE • To stop ground drive, depress brake pedal
all the way down.

ENGINE • Turn ignition key to “STOP” position and remove key. Always remove key when leaving
riding mower to prevent unauthorized use.
IMPORTANT: Leaving the ignition switch in
any position other than "STOP" will cause
the battery to discharge and go dead.

KEY PART
NO. NO.

DESCRIPTION

1
2
3
4
5
6
7
8
9
10
11
12
13

BATTERY
FOAM, POLYURETHANE
SWITCH, IGN, DLTA, P-IN, ROS
KEY/CHAIN
FUSE, 5A
FUSE, 40A
SWITCH, PLUNGER, NO, OLIVE
RELAY, 40A
SWITCH, INTLK,CL, MWR, GRY
SWITCH, INTERLOCK, NONC,GRAY
MODULE, STARTING, RECOIL, LRV
SWITCH, SEAT, DP, ROS
HARNESS, IGN, ELECTSTART, LRV

532 43 70-70
532 42 54-16
532 19 33-50
532 41 19-33
532 43 33-30
532 42 59-37
532 16 07-84
532 43 15-42
532 10 95-53
532 17 61-38
532 43 18-46
532 19 27-49
532 42 84-77

NOTE: All component dimensions given in U.S. inches
1 inch = 25.4 mm

TO ADJUST MOWER CUTTING HEIGHT
The position of the mower height deck lift
lever determines the cutting height.
• Grasp lift lever.
• Press lift lever plunger with thumb and
move lever to desired position.
The cutting height range is approximately
1-1/2 to 4". The heights are measured from
the ground to the blade tip with the engine
not running. These heights are approximate
and may vary depending upon soil conditions, height of grass and types of grass
being mowed.
• The average lawn should be cut to approximately 2-1/2" during the cool season
and to over 3" during hot months. For
healthier and better looking lawns, mow
often and after moderate growth.
• For best cutting performance, grass over
6" in height should be mowed twice. Make
the first cut relatively high; the second to
desired height.

RIDING MOWER

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

ELECTRICAL

LRV1

5
6

TO OPERATE MOWER
Your riding mower is equipped with an
operator presence sensing switch. Any
attempt by the operator to leave the seat
with the engine running and the deck clutch
engaged will shut off the engine. You must
remain fully and centrally positioned in the
seat to prevent the engine from hesitating or
cutting off when operating your equipment
on rough, rolling terrain or hills.
1. Select desired height of cut.
2. Start mower blade by engaging deck
clutch lever.
TO STOP MOWER BLADEDisengage deck clutch lever.
Deck Clutch Lever
"Disengaged" Position

REVERSE OPERATION SYSTEM (ROS)
Your tractor is equipped with a Reverse
Operation System (ROS). Any attempt by
the operator to travel in the reverse direction with the deck clutch engaged will shut
off the engine unless ignition key is placed
in the ROS "ON" position.
WARNING: Backing up with the deck
clutch engaged while mowing is strongly
discouraged. Turning the ROS "ON", to allow reverse operation with the deck clutch
engaged, should only be done when the
operator decides it is necessary to reposition the machine with the attachment
engaged. Do not mow in reverse unless
absolutely necessary.

Mower Height
Adjustment High
Position

USING THE REVERSE OPERATION
SYSTEM Only use if you are certain no children or
other bystanders will enter the mowing
area.
1. Move motion control lever to neutral
(N) position.
2. With engine running, turn ignition key
counterclockwise to ROS "ON" position.
3. Look down and behind before and
while backing.
4. Slowly move motion control lever to
reverse (R) position to start movement.
5. When use of the ROS is no longer
needed, turn the ignition key clockwise
to engine "ON" position.

Deck Clutch Lever
"Engaged" Position

Mower Height
Adjustment
Low Position

ROS "ON" Position

Engine "ON" Position
(Normal Operating)

CAUTION: Do not operate the mower
without either the entire grass catcher, on
mowers so equipped, or the deflector shield
in place.
9
02828

Deflector Shield

RIDING MOWER

BATTERY

SCH21

FUSE-5A
RED

RED

When starting the engine for the first time
or if the engine has run out of fuel, it will
take extra cranking time to move fuel from
the tank to the engine.
1. Be sure freewheel control is in the
transmission engaged position.
2. Sit on seat in operating position,
depress clutch/brake pedal and set
parking brake.
3. Place motion control lever in neutral
(N) position.
4. Move deck clutch to disengaged position.
5. Insert key into ignition and turn key
clockwise to start position and release
key as soon as engine starts. Do not
run starter continuously for more than
fifteen seconds per minute.
NOTE: If at high altitude (above 3000
feet) or in cold temperature (below 32°F)
the fuel mixture may need to be adjusted
for best performance.

• To reengage transmission, reverse above
procedure, or press brake lever all the way
down.

BEFORE STARTING THE ENGINE
CHECK ENGINE OIL LEVEL
The engine in your riding mower has been
shipped, from the factory, already filled with
summer weight oil.
1. Check engine oil with riding mower on
level ground.
2. Remove oil fill cap/dipstick and wipe
clean, reinsert the dipstick and screw cap
tight, wait for a few seconds, remove and
read oil level. If necessary, add oil until
“FULL” mark on dipstick is reached. Do
not overfill.

STARTER

RED

FUSE-40A

WHITE

WHITE
BLACK

B S M
WHITE

A1
L A2

BLACK/WHITE

CLUTCH / BRAKE
(PEDAL UP)

ATTACHMENT CLUTCH
(CLUTCH OFF)

BLACK/WHITE

SAFETY START MODULE
SEAT SWITCH
(NOT OCCUPIED)

GREEN

BLACK

GRAY

REVERSE SWITCH
NOT IN REVERSE

SHORTING CONNECTOR
BLACK

YELLOW

IGNITION
UNIT

BLACK/WHITE

SPARK PLUG
GAP

TO START ENGINE
Freewheel
Control
Engaged

BLACK

STARTER
RELAY

CAUTION: Alcohol blended fuels (called
gasohol or using ethanol or methanol) can
attract moisture which leads to separation
and formation of acids during storage. Acidic
gas can damage the fuel system of an engine
while in storage. To avoid engine problems,
the fuel system should be emptied before
storage of 30 days or longer. Drain the gas
tank, start the engine and let it run until the
fuel lines and carburetor are empty. Use fresh
fuel next season. See Storage Instructions
for additional information. Never use engine
or carburetor cleaner products in the fuel tank
or permanent damage may occur.

Freewheel
Control
Disengaged

MODEL NUMBER WE261 (96022000801)
PRODUCT NUMBER 960 22 00-08

SCHEMATIC

RED

For cold weather operation you should
change oil for easier starting (See the oil
viscosity chart in the Maintenance section
of this manual).
• To change engine oil, see the Maintenance section in this manual.
ADD GASOLINE
• Fill fuel tank to bottom of filler neck. Do
not overfill. Use fresh, clean, regular
unleaded gasoline with a minimum of
87 octane. (Use of leaded gasoline will
increase carbon and lead oxide deposits
and reduce valve life). Do not mix oil with
gasoline. Purchase fuel in quantities that
can be used within 30 days to assure fuel
freshness.
CAUTION: Wipe off any spilled oil or
fuel. Do not store, spill or use gasoline near
an open flame.

BLACK

•

TO OPERATE ON HILLS
WARNING: Do not drive up or down
hills with slopes greater than 15° and do not
drive across any slope. Use the slope guide
at the back of this manual.
• Choose the slowest speed before starting
up or down hills.
• Avoid stopping or changing speed on
hills.
• If stopping is absolutely necessary, push
clutch/brake pedal quickly to brake position
and engage parking brake.
• Move motion control lever to neutral (N)
position.
• To restart movement, slowly release parking brake and clutch/brake pedal.
• Make all turns slowly.
TO TRANSPORT
When pushing or towing your riding mower,
be sure to disengage transmission by placing
freewheel control in freewheel position.
Freewheel control is located at the rear
drawbar of the riding mower.
• Raise mower height adjustment to its
highest position with mower height
adjustment lever.
• Push freewheel control down and over
with foot.

CHARGING SYSTEM OUTPUT
. 5 AMP DC @ 3600 RPM

28 VOLTS AC MIN. @ 3600 RPM
(CHARGING SYSTEM DISCONNECTED)

RED

DIODE

STATOR

SAFETY START MODULE
VIEWED FROM MATING SIDE

REMOVABLE
CONNECTIONS

IGNITION SWITCH
POSITION

CIRCUIT

OFF
RUN/OVERRIDE

M+G+A1
B+A1

RUN
START

B+A1
B + S + A1

“MAKE”

L+A2

WIRING INSULATED CLIPS
NOTE: IF WIRING INSULATED CLIPS
WERE REMOVED FOR SERVICING OF
UNIT, THEY SHOULD BE RE-INSTALLED
TO PROPERLY SECURE YOUR WIRING.

NON-REMOVABLE
CONNECTIONS

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : Adobe InDesign CS5 (7.0)
Modify Date                     : 2011:09:09 10:19:28-05:00
Create Date                     : 2011:02:21 07:45:04-05:00
Metadata Date                   : 2011:09:09 10:19:28-05:00
Format                          : application/pdf
Title                           : WE261-e-96022000801-442476_r1.indd
Creator                         : bduffie
Document ID                     : uuid:6573b242-b7f5-4305-9a00-b515e29eee96
Instance ID                     : uuid:011c47ea-78e6-4cef-9163-054432bb567d
Has XFA                         : No
Page Count                      : 13
Author                          : bduffie

EXIF Metadata provided by EXIF.tools

WE261 E 96022000801 442476_r1 !!

Preview ! 96022000801 Weed Eater Lawn Mower Manuals - Lawn Mower Manuals – The Best Lawn Mower Manuals Collection

Navigation menu

Versions of this User Manual:

Views

Navigation