A5583A Step One Touchscreen OM
User Manual: A5583A StepOne Touchscreen OM
Open the PDF directly: View PDF 
.
Page Count: 36
| Download | |
| Open PDF In Browser | View PDF |
Owner’s Touchscreen Operation Manual
TM
RECUMBENT STEPPER
Before Using this product, read this manual and
follow all safety rules and operating instructions.
THIS PAGE LEFT BLANK INTENTIONALLY
TABLE OF CONTENTS
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SET-UP & INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PRODUCT OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
KEYPAD FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
HANDLEBAR & SEAT ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 11
HEART RATE TRANSMITTER STRAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
PROGRAM INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 20
ADDITIONAL KEY FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
MAINTENANCE & SERVICE. . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - 27
CERTIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
WARRANTY CARD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 29
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
safety information
The purpose of safety symbols is to attract your attention to possible dangers. The safety or attention symbols and their
explanations deserve your careful attention and understanding. The warnings do not, by themselves, eliminate any
danger. The instructions or warnings they give are not substitutes for proper accident prevention measures.
Look for these symbols to point out safety precautions or important information.
CAUTION
Warning
ATTENTION
Read all instructions before using your SCIFIT exercise machine. Save these instructions for future reference.
Close supervision is necessary when the exercise machine is being used by or near children or individuals with
disabilities. Keep children away from extended hand and foot supports.
Use the exercise machine only for its intended use as described in this manual. Do not use attachments not recommended
by the manufacturer.
Never drop or insert any object into any opening.
Do not use outdoors or in a harsh environment where water is present (i.e. pool or spa areas).
1
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
INTRODUCTION
introduction
Guidelines for Healthy Adults
The American College of Sports Medicine (ACSM) and
the American Heart Association (AHA) are continuously
updating guidelines and recommendations for physical
activity.
Thank you for your purchase of the SCIFIT StepOne
recumbent stepper. We have incorporated the finest
technology and ergonomic design into this machine to assist
you in achieving your fitness goals. However, for your
safety, please adhere to the following recommendations
before you begin to exercise.
The current basic recommendations from ACSM and AHA
are:
The SCIFIT StepOne is designed for Class “S”
(Commercial), Class “A” (High Accuracy) and Class “II
a” (Medical Device Directive) applications. The intended
uses are for Cardio & Pulmonary Rehabilitation as well as
Sports Medicine, Physical Therapy, Physical Conditioning
and Strength Training. SCIFIT equipment is suitable for
placement in medical, wellness, fitness, and recreational
facilities. The StepOne recumbent stepper has 200 levels
of console controlled resistance, which ensures that users
of all fitness levels will be able to get a challenging but not
overwhelming workout.
Do moderately intense cardio 30 minutes a day, five days
a week.
OR
Do vigorously intense cardio 20 minutes a day, three days
a week.
AND
Do eight to ten strength-training exercises, eight to twelve
repetitions of each exercise twice a week.
Moderate-intensity physical activity means working hard
enough to raise your heart rate and break a sweat, yet
still being able to carry on a conversation. It should be
noted that to lose weight or maintain weight loss, 60 to
90 minutes of physical activity may be necessary. The 30
minute recommendation is for the average healthy adult to
maintain health and reduce the risk for chronic disease.
Consult Your Physician
Consult your physician or medical specialist before
participating in any exercise program, especially if you
are pregnant or if you are suffering from heart disease,
respiratory disease, diabetes, hypertension, high blood
pressure, elevated cholesterol, arthritis, or any other
diseases and physical complaints.
To review the latest guidelines and recommendations, visit
the American College of Sports Medicine website: www.
acsm.org
Adult Usage
SCIFIT equipment is designed and intended for adult usage
and children of appropriate ages while being supervised.
Young children should be kept a safe distance away from
equipment.
Warning
Stop exercising immediately if you feel nausea, dizziness,
sharp pain, or any other physical discomfort. Failure to
stop exercising can result in injury or death to yourself.
Cool Down
To prevent muscle injuries and soreness, you should always
cool down (at least 5 minutes) by doing a series of stretches
after each workout.
Train Intelligently
To ensure a future of good health, you should always eat
well balanced meals, drink plenty of fluid/water during a
workout, and stay fit by exercising intelligently. Always
follow training guidelines that are specific to your own
physical condition.
caution
Always stretch after a workout session to reduce the risk
of personal injury. Failure to stretch properly may result
in injury to yourself.
Warning
Injuries to health may result from incorrect or excessive
training. Failure to stop exercising can result in injury or
death to yourself.
2
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
SPECIFICATIONS
specifications
Weight
StepOne - 275 lbs (124 kg)
Max User Weight
Fixed/Swivel - 450 lbs (204 kg) Fixed Bariatric- 600 lbs (272 kg) Adjustable - 450 lbs (204 kg)
Power
Self generating w/auto recharge battery back-up (15 Volt AC adapter included).
Resistance System
Electromagnetic Self Generating Resistance
Programs
Manual, Fit Quik, Constant Workout, ISO-Strength, 7 Pre-programmed HILLS profiles,
Heart Rate, Stress Test and Random
Accuracy Class
Class A
Within U.S. & Canada: 5 years parts, 1 year labor
Outside U.S.: 5 years parts, no labor
Warranty
766mm
30in
1742mm
69in
1220mm
48in
3
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
SETUP
& INSTALLATION
specifications
Level Cardiovascular Machine
If the sub-floor is unlevel, the unit is equipped with leveling
end caps. The end caps are designed with the recess of the
end cap off centered. This allows you to rotate the endcap(s)
to a position that will level the equipment. After adjustment,
check and make sure end caps are fully seated against base
frame tubes.
ATTENTION
Depending on the regular operation of the
machine, the StepOne may require the DC wall
pack to be plugged into the machine at all times.
The following guidelines show typical conditions
that would require use of the DC wall pack with
shorter stride rates requiring more steps per minute:
1. A full step stride of 11.5” below 40 Steps per Min.
2. A half step stride of 6” below 80 Step per Minute
Offset Endcap
CAUTION
The StepOne should be positioned with a safety perimeter
of 40” or 1 meter around the unit (see diagram).
Additional personnel may be required to move the machine.
Placement on an unstable sub-floor without a proper safety
perimeter can result in injury to yourself and others.
40” (1m)
Spacing
Placement of Cardiovascular Machine
The StepOne has two transport wheels located in the front
of the machine and can be moved by grabbing the lift handle
at the rear of the machine.
Endcap
Endcap
LIFT
HANDLE
40” (1m)
Spacing
40” (1m)
Spacing
Position the unit in a location that has a stable and level
sub-floor. Equipment should be positioned in a location
that is not in direct sunlight, extreme temperatures and
humidity or where it may be splashed with water or fluids.
This machine is intended for indoor use only.
4
SCIFIT
Scientific Solutions For Fitness
SCIFIT
40” (1m)
Spacing
Scientific Solutions For Fitness
SCIFIT
PRODUCT
OVERVIEW
specifications
ERGONOMIC
EASY GRIP
HANDLES
INTELLI-FIT
CONSOLE
ERGONOMIC
SEAT ASSEMBLIES
(MODEL DEPENDENT)
HANDLEBAR LENGTH
AND ANGLE CLAMPS
OVERSIZED
COMFORT
FOOTBEDS
FOOT PEDAL FOR
ADJUSTABLE
FORWARD/BACKWARD
SEAT MOTION
LEVELING
ENDCAPS
5
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
KEYPAD
FUNCTIONS
specifications
ATTENTION
The tactile keys on the membrane switch are fully functional and may still be used for
Data Entry, Workout selection, etc., if so chosen.
Pause
Clear
Enter
Quick
Start
WORKOUT
SELECTION
The operator can
choose up to eight
different workouts.
WARNING! Heart rate monitoring systems may be inaccurate.
Over exercise may result in serious injury.
If you feel faint or pain stop exercising immediately
PAUSE/CLEAR
This key pauses the workout at anytime.
Three choices then become available:
1. Continue the workout
2. Change data entry information
3. Stop the workout
QUICK START
Begins a pre-programmed
15 minute workout session.
UP/DOWN ARROWS
These keys increase or
decrease values of workout
parameters.
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
ENTER
This key confirms the
operator’s category value
selection in the data entry
screen.
6
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
HANDLEBAR
& SEAT ADJUSTMENTS
specifications
Handlebar Adjustments
The right and left handlebars of the StepOne can be adjusted into different positions with the attached
clamping mechanism, so the operator can place themselves into the proper biomechanical position for a
comfortable workout.
Repositioning The Handlebar
Gently grab the handle of the clamping mechanism and pull downward freeing the handlebar to move away
from the machine or toward the machine. Using the etched numbers on the handlebar determine the most
comfortable position for your arm length.
When the desired position has been determined, lock the handlebar in place by pushing upward on the
clamp handle until it is firmly against the body of the clamp mechanism.
7
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
HANDLEBAR
& SEAT ADJUSTMENTS
specifications
Handlebar Angle Adjustments
The handle can also be positioned into three different angles to allow the operator’s hand a more ergonomic
and comfortable setting during the workout.
L (+30 )
R (-30 )
L (0 )
R (0 )
L (- 30 )
R (+30 )
ETCHED
LOCATOR
Step 1: Open the clamp to free the handle.
Step 2: Use the etched notch on the handle to position the handle at the preferred angle.
Step 3: Close the clamp to secure the angle position.
8
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
HANDLEBAR
& SEAT ADJUSTMENTS
specifications
FIXED SEATPOSTS
SEAT REMOVALS
Step 1: Place one hand on the back
of the seat cushion back support.
Step 2: Use the other hand to pull upward and hold the
yellow adjustment knob located on the front of the seatpost.
Step 3: Slide the seat assembly backwards until it is
completely off of the machine seat track.
LIFT AND
HOLD
REMOVE
FORWARD/BACKWARD ADJUSTMENTS
The seat can be adjusted in 1” (25.4mm) increments and is
held in place with a spring loaded pin. This is done by using
the round yellow knob at the front of the seat assembly.
Step 1: Place one hand on the back
of the seat cushion back support.
Step 2: Use the other hand to pull upward and hold the
yellow adjustment knob located on the front of the seatpost.
Step 3: Slide the seat assembly forward or backwards on the
machine seat track to the desired position.
LIFT AND
HOLD
BACKWARD
FORWARD
9
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
HANDLEBAR
& SEAT ADJUSTMENTS
specifications
ADJUSTABLE & FIXED/SWIVEL SEATPOSTSS
SEAT REMOVALS
Step 1: Place one hand on the back
of the seat cushion back support.
Step 2a (Adjustable Only): Use the other hand to pull upward
and hold the yellow T-Handle located in front of the seat.
2a
Step 2b (Fixed/Swivel): Step on the yellow foot pedal.
Step 3: Slide the seat assembly backwards until it is
completely off of the machine seat track.
REMO
2b
VE
ADJ. BUCKET SEAT SHOWN
FORWARD/BACKWARD ADJUSTMENTS
The seat can be adjusted in 1” (25.4mm) increments and is
held in place with a spring loaded pin. This is done by using
one of two options (1) Pull cable or (2) Foot pedal.
Step 1: Place one hand on the back
of the seat cushion back support.
OPTION #1
Step 2 Option #1 (Adjustable Only):
Use the other hand to pull upward and hold the
yellow T-Handle located in front of the seat.
BACK
WARD
Step 2 Option #2 (Adjustable, Fixed/Swivel)
Step on the yellow foot pedal
OPTION #2
FORW
ARD
Step 3: Slide the seat assembly forward or backwards on the
machine seat track to the desired position.
10
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
HANDLEBAR
& SEAT ADJUSTMENTS
specifications
ADJUSTABLE & FIXED/SWIVEL SEATPOSTSS
SEAT ROTATIONS
Step 1: Push downward on the yellow handle
adjustment lever to rotate the seat right or left.
PUSH THE
LEVER
DOWNWARD
TO ROTATE
THE SEAT
Note: The seat will lock into place every 90 degree
postion.
(ADJUSTABLE BUCKET SEAT SHOWN)
vertical adjustment
(adjustable seatpost only)S
Step 1: Pull the yellow handle lever
upward to raise or lower the seat assembly.
PULL THE
YELLOW
HANDLE
LEVER
UPWARD
Note: No weight should be on the seat when raising.
11
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Heart rate
transmitter strap
specifications
Heart Rate Transmitter Strap
The optional wireless heart rate transmitter accessory is a
useful device if you desire continuous feedback on your
current heart rate during a workout. In addition, the StepOne
includes a heart rate control program which requires the use
of the strap.
Calculating Target Heart Rate Zone
Your approximate Maximum Heart Rate (MHR) is equal
to 220 minus your age. The upper limit of your target zone
is equal to 0.85 times your MHR. The lower limit of your
target zone is equal to 0.60 times your MHR.
For Example:
Your age is 40:
220 - 40 = 180
180 x .85 = 153 (max MHR)
180 x .60 = 108 (min MHR)
The heart rate control program enables the user to
set-up a target heart rate through real-time monitoring of
the user’s heart rate. The console maintains the user’s heart
rate at or below this established target rate by decreasing the
workload if the user’s heart rate exceeds the target.
These values are based upon averages, always consult your
physician to establish the proper Heart rate zone for your
individual health condition.
Activating & Deactivating Transmitter
Heart Rate transmitter straps come in a variety of styles and
manufacturers. To properly activate, secure the strap to the
chest and to deactivate follow the instructions that come
with the transmitter strap.
caution
Always follow the manufacturers instructions for
proper care and use. Failure to follow manufacturers
instructions may result in injury to yourself.
warning
Heart Rate monitoring systems may be inaccurate if
you feel faint. Stop exercising immediately. Excessive
exercising may result in serious injury or death.
12
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
PROGRAM
INSTRUCTIONS
specifications
Programs
SCIFIT products have 200 levels of computer controlled
resistance, which ensures that users of all fitness levels
will be able to get a challenging but not overwhelming
workout. Because the resistance is adjustable in .1
increments, it is easy for the user to track progress. SCIFIT
products feature one of the highest resistance capabilities
available on any cardio equipment.
The StepOne is self-generated and has an extremely low
starting resistance. One pedal movement activates the
console and the screen will remain lit at the most minimal
levels of movement.
When a workout program has been selected, the console
will then advance to the “Data Entry” mode where
additional information is entered prior to the workout
commencing.
The user will have two options of entering data as each
category is displayed on the screen.
A. Using the numerical touchscreen keypad (No. #1).
B. Using the “+” or “-” arrow keys (No. #2).
C. When the correct information has been entered,
touching the “Accept” button will save the data and
advance to the next category or begin the workout if it is
the last category (No. #3).
The StepOne has a battery back up which will keep the
screen lit for a short period after the workout is completed
or if the user stops. This varies between 0 seconds and
3 minutes and can change with the amount of use each
product gets.
(#2)
If you prefer the console to remain lit at all times, a AC
adapter (included) can be plugged into the machine to
accomplish this. This is common in medical settings and
with Fit-Key Programs.
(#1)
(#2)
Touchscreen
Touchscreen allows the user to select any program or
key feature on the console with just a finger tip touch
of the screen. The StepOne offers workout program
options that can be selected from the touchscreen display
(Menu screen example shown below). Six programs are
shown on the screen at one time, additional programs can
also be viewed by touching the “More” key on the screen.
(#3)
13
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
PROGRAM
INSTRUCTIONS
specifications
Programs
The StepOne machine offers eight workout programs
(Not including Quick Start). The following is a summary
of the first six programs.
Using the data entry options described on page 13.
Enter the workout duration:
Quick Start
Allows the user to get on the machine and go. Touching
the “Quick Start” key at the main screen begins a workout
with no set time limit. The intensity level can be changed by
pressing the “Menu” key on the screen to view additional
key features.
Touch the
Time
15:00
key.
Touch the
Select the level intensity:
Changing The Intensity Level:
Touch the
key.
key.
Level
1.0
Additional key features will appear at the bottom of the
screen.
Touch the
Touching the “Increase or Decrease” keys will change the
workout intensity level.
key.
Enter the user weight:
Manual Workout
Allows the user to set the intensity at any level. This level
will not change unless the user manually increases or
decreases the intensity.
Weight
150
Touch the
key.
Touch the
14
SCIFIT
Scientific Solutions For Fitness
SCIFIT
key
and begin the workout.
Scientific Solutions For Fitness
SCIFIT
PROGRAM
INSTRUCTIONS
specifications
Constant Work
Workout resistance is automatically adjusted to compensate
for any change in pedal speed (SPM), thus workload (Watts)
will remain constant at any given setting.
Enter the user weight:
Weight
Touch the
150
key.
Enter the workout duration:
key.
Touch the
and begin the workout.
Time
15:00
ISO-Strength Program
ISO-Strength is a isokenitic program, meaning that
the unit will resist your movements in order to force
you to stay at a set speed. This type of strength
workout will not cause excessive soreness because it
is accommodating. The console will adjust resistance
to keep the user at the target SPM (Steps Per Minute)
key.
Touch the
Touch the
Enter the target watts:
key.
Enter the workout duration:
Target
20
Time
5:00
Touch the
key.
Touch the
key.
15
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
PROGRAM
INSTRUCTIONS
specifications
ISO-Strength Cont’d
Enter the target SPM (Steps Per Min.):
Select the course profile:
Target
20
Course
key.
Touch the
Touch the
Enter user weight:
key.
Enter the workout duration:
Weight
Time
150
15:00
key.
Touch the
Touch the
and begin the workout.
key.
Select the level intensity:
Hills Program
Allows the user to select from seven different Hill profiles
set at various pre-programmed intensities.
The following profiles are available: Course, Sprints,
Twin Peaks, Peak, Progressive, Multi-Peaks and Ramp.
Touch the
Level
1.0
key.
Touch the
key.
16
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
PROGRAM
INSTRUCTIONS
specifications
Enter the user weight:
If the signal continues to be undetected the program
will exit and return to the main screen.
Weight
150
Touch the
key.
Enter the workout duration:
key.
Touch the
and begin the workout.
Time
15:00
Heart Rate Program
A heart rate transmitter chest strap is required for this program.
Refer to page 12 for a complete instruction on using the strap
and to understand how to calculate your target heart rate.
• Place the transmitter strap on your chest
Touch the
key.
Enter the target heart rate:
ATTENTION
Target
120
If you are not wearing a transmitter belt or the belt is not
sending a signal correctly, after a short period of time
the following message will appear.
Touch the
key.
17
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
PROGRAM
INSTRUCTIONS
specifications
Heart Rate Cont’d
More
Pressing this key will change the screen to show an
additional two more pre-programmed workout profiles:
Random and Stress Test.
Enter the user weight:
Weight
150
Touch the
key.
key.
Touch the
and begin the workout.
Random Program
This program randomly displays different workout profiles
each with its own level of difficulty. The user only has to
choose the type of profile, length of workout time and the
level difficulty.
Fit Quik
Allows the user to select a two stage program of
cardiovascular work with ISO-strength (Isokinetic).
Work loads and time durations are preset within the Set-Up
mode.
The following category is only seen when Manual, Hills or
Constant Work is selected in the “Set-up mode”.
R
Touch the
Note: The highest column of the profile represents the
highest workout level you selected. Columns below it are
percentages of the level selected.
Touch the
key.
key.
Select the course profile:
Enter the user weight:
Weight
150
Random
key.
Touch the
Touch the
key.
and begin the workout.
18
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
PROGRAM
INSTRUCTIONS
specifications
Random Cont’d
Stress Test
A designed stress test to be used as a training program
or use with other diagnostic devices (if applicable).
The user sets a target wattage with timed intervals and
preset wattage increments.
Enter the workout duration:
Time
15:00
Touch the
key.
key.
Touch the
Select the level intensity:
Enter the wattage target:
Level
First Target
50
1.0
key.
Touch the
Touch the
Enter the user weight:
key.
Enter the wattage increments:
Weight
Increments
150
5
key.
Touch the
Touch the
key.
and begin the workout.
19
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
PROGRAM
INSTRUCTIONS
specifications
Stress Test Cont’d
Enter the time intervals:
Interval
5:00
key.
Touch the
Enter the user weight:
Weight
150
Touch the
and begin the workout.
20
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
ADDITIONAL
KEY FEATURES
specifications
This activates two 3-speed cooling fans
(Low, Medium, High) at anytime during the
workout. Each touch of the key will change
the fan airflow speed.
The SCIFIT touchscreen console also includes extra
user friendly key features that may be accessed during a
workout.
Once a workout commences, the word “Menu” will appear
in the lower right corner of the screen.
This feature increases resistance for a short
duration of time during the workout when
activated. Touching this key will activate the
feature and a short count down will be seen
on the screen to prepare the user. The duration
length of the “Power Burst” can be increased
or decreased in the “Set-up” mode.
Just a touch of the “Menu” icon activates a pop-up menu
that appears at the bottom of the screen for additional
selections.
Touch the
key.
Only seen when the “Random” program is
selected. It allows the user to change the
current workout profile at the bottom of the
screen to a different one by touching the
“Change Profile” key anytime during the
workout.
Pop-up menu with additional key features appear.
Key Descriptions
Set-Up Mode Access
Allows the user to change the viewing format
of the workout profile and data displayed on
the screen during the workout.
This code allows the operator to access the “Set-Up Mode”
screen customizing the program parameters for the operator
needs.
Allows the user to change the
intensity of the workout.
Pauses the workout program at anytime. The
screen then changes providing the user with
three options as shown below.
To enter the “Set-Up Mode”:
Press the [One Dot], [Six Dot] and the [ENTER]
keys at the same time. The screen will then change
and display various categories that may be customized
(Also see “Set-Up Mode Document” on the
www.SCFIT.com website).
Change
Returns to the data entry screen where the information
previously entered can be changed.
Manual
Pause
Clear
Continue
Restarts the workout program at the point where the user
had paused it.
Fit-Quik
Constant Work
Iso-Strength
Hills
More
Quick
Start
WARNING! Heart rate monitoring systems may be inaccurate.
Over exercise may result in serious injury.
If you feel faint or pain stop exercising immediately
Stop
Exits the workout and returns to the main screen.
SCIFIT • Scientific Solutions for Fitness • SCIFIT • Scientific Solutions for Fitness • SCIFIT
21
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
MAINTENANCE
& SERVICE
specifications
Maintenance
The StepOne is virtually maintenance free. After training,
always wipe down your SCIFIT exercise product.
Perspiration that continuously settles on the frame,
upholstery, covers, and console may eventually cause rust
or damage. Damage resulting from lack of maintenance is
not covered under warranty.
UNITED STATES CUSTOMER SERVICE
For assistance in the service of SCIFIT products;
phone : +1 (918) 359-2000
fax : +1 (918) 359-2045
e-mail: service@scifit.com
The Product Support department is available by means
of email. A voice mail service is available 24 hours a day
for recording messages to request technical support and to
order replacement parts. Our mailing address is:
If defective components are identified and require
replacement, the equipment should be put out of service
until repaired.
SCIFIT Systems Inc.
5151 S. 110th E. Ave.
Tulsa, OK 74146
USA
caution
Always follow manufacturers instructions for proper care
and use. Failure to follow manufacturers instructions
may result in injury to yourself.
UK & EUROPEAN CUSTOMER SERVICE
StepOne Maintenance Schedule
phone : +44 1344 300022
fax: +44 1344 868838
e-mail: info@scifit.uk.com
Any mechanical or electrical work conducted
within the main body of a medical CE class IIa unit
MUST BE RECALIBRATED. The generic maintenance
schedule below should be applied to both medical CE and
non-medical products
COMPONENT
USE
WHEN
BY WHOM
Covers, Seat, Handlebars
and Console
Damp Cloth
Daily
Club Maintenance
LCD Screen
Damp Cloth
Weekly
Club Maintenance
Battery
Voltmeter
Every
6 Months
Club Maintenance
Seat Assy. Base Frame Roller
Guide and Adjustment Pan
Damp Cloth
Every two
weeks
Club Maintenance
Lower Linkage Connections
SCIFIT LTD (UK)
Lexham House
Forest Road
Binfield
Berkshire, RG42 4HP
UK
High Use - Check Bimonthly
Low Use - Check Every 6 mo.
Company Number: 5970624 (UK)
*COUNTRIES OUTSIDE OF UK & EUROPE
PLEASE USE USA CONTACT NUMBERS*
Club Maintenance
CAUTION
Contact your local waste management agency for
specific requirements concerning recycling and disposal
locations of batteries.
Order online 24/ 7 at www.SCIFIT.com
22
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
WARRANTY
specifications
It is very important that your SCIFIT machine is registered. This can be
done online at http:/www.SCIFIT.com/warrantyregistration.shtml/ or fill out and
mail the registration form on the back of this manual.
SCIFIT Statement of STEP ONE™ Warranty Only
SCIFIT warranties new products against defective workmanship and/or materials under normal and proper use
subject to the following limitations:
(a) SCIFIT’s obligation to the original purchaser shall apply within the
United States and Canada to both parts and the cost of labor required
to replace or repair a defective product, at SCIFIT’s option, for a period of one (1) year from user/
dealer purchase date as documented by *warranty card and if warranty card has not been returned
by user/dealer, then date of shipment from the factory. Thereafter, for a period of four (4) years, such
obligation shall extend only to the supply of replacement parts with any labor costs associated with such
replacement or repair to be at buyer’s expense. Refer to clause (e) for components outside this policy
clause.
Outside the United States and Canada SCIFIT will repair or replace defective product with no labor
included for a period of three (3) years from user purchase date as documented by *warranty card and if
warranty card has not been returned by user then date of shipment from factory. However these warranty
periods for sales outside the United States and Canada are subject to modification by local SCIFIT sales
dealers.
*Note: Original purchaser must register their purchased products either by warranty card return, web site
registration or fax to activate warranty period or shipment date is extant for start of warranty period. A
ninety (90) day period is to be given for warranty registration to allow stock rotation and showroom stock
thereafter registration will be shipment date for the start of the warranty period.
(b) SCIFIT’s obligation shall be limited to repairing or replacing defective parts. No allowance shall be
granted for repairs made by Buyer without SCIFIT’s prior written approval. The decision to replace or
repair shall be solely at SCIFIT’s discretion. SCIFIT reserves the right to require return of warranty parts,
or payment, in some cases. See “Return of Parts” below.
(c) SCIFIT’s warranty does not apply to parts requiring replacement or repair due to normal and
abnormal wear and tear, improper use, corrosion (perspiration), improper maintenance, improper
installation, improper rated, grounded or dedicated electrical circuits or improper storage, nor does it
apply where all or part of the product has been altered from its original state by Buyer or a third party.
(d) THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, ARISING BY LAW OR OTHERWISE INCLUDING WARRANTY OR MERCHANTABILITY
OF FITNESS FOR PARTICULAR PURPOSE, AND IS IN LIEU OF ALL OTHER LIABILITIES
OF SCIFIT INCLUDING DIRECT, INDIRECT, SPECIAL AND CONSEQUENTIAL DAMAGES OR
PENALTIES EXPRESSED OR IMPLIED WHETHER ARISING OUT OF CONTRACT, NEGLIGENCE
OR OTHER SORT.
23
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
WARRANTY
specifications
SCIFIT Statement of Warranty
(e) The below listed items have the following warranty coverage unless
determined to be defective. These items include, but are not limited to:
STEP ONE™
Upholstery
Saddles/Seats
Pedals/Foot beds
Rubber grips
Frame*
Battery
Brake
Seat frame pedestal (seatpost)
Console membrane switch
Springs and Drive belts
Warranty Period
12 months
12 months
12 months
12 months
10 years
1 year
3 years
3 years
3 years
3 years
Accessories Products
Pedal straps
Heart rate receiver/Transmitter
Assist gloves
Leg stabilizer
Warranty Period
Normal wear & tear
90 days
90 days
12 months
*Frame includes: Base and Main frame
(f) Fires, floods, and acts of God, are not covered under ths
warranty.
24
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
WARRANTY
specifications
Freight and Shipping
All SCIFIT products have displayed on the outside packaging “STOP – UPON DELIVERY
INSPECT MERCHANDISE THOUROUGHLY NOTING ANY DAMAGE ON RECEIVING
PAPERWORK PRIOR TO SIGNING”.
................................................................
Shipping and Installation
SCIFIT is not responsible for the repair or replacement of any unit or part damaged during transit
or installation. The customer is responsible for inspection of each unit and part for shipping
damage at the time of installation. If the customer signs an unqualified receipt for freight or
damage goods, the customer is solely responsible for the cost of the repair or replacement
for such freight damage.
................................................................
Software, Trademarks, Copyrights and Patents
If an order includes computer software, such software is transferred by SCIFIT to the customer
pursuant to a single user license, the royalty terms and conditions of that are set forth on or in the
package accompanying the software.
SCIFIT has trademarked several names to uniquely identify its business and products. These
names must not be used by other entities and remain the exclusive right of SCIFIT. SCIFIT’s
decals, user manuals, and service manuals are copyrighted and may not be copied without prior
written approval from SCIFIT.
SCIFIT owns patents on designs and features that are unique to its products. SCIFIT will defend
these patents against those who attempt to utilize these features and designs in other products.
25
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
WARRANTY
specifications
Maintenance
After using, always wipe down your SCIFIT exercise
product. Perspiration that continuously settles on
frame, upholstery, casings and control panels may
eventually cause rust or damage. Damage resulting
from lack of maintenance WILL NOT be covered under
warranty. To clean upholstery, use mild soap and warm
water, then dry with a clean towel. Refer to the machine
maintenance schedule.
.................................................................
Product Support
Assistance for the service of SCIFIT products is available by
•
•
•
•
Fax: +1 (918) 359-2045
Phone: +1 (918) 359-2040
Toll Free: +1 (800) 745-1373
Email: Service@SCIFIT.com
The product support department is staffed from 7 AM to 5 PM US Central Time Monday through
Friday. A voicemail service is available 24 hours daily for recording messages to request
technical support and to order replacement parts. Our goal is to return every voicemail call within
30 minutes of when it is placed during our normal business hours. Some parts may also be
purchased online using a credit card at: www.SCIFIT.com
Please have the following information prior to calling technical support:
• Model number of equipment
• Serial number of equipment
• Point of contact name and phone number
• Detailed description of symptoms encountered.
.................................................................
Parts Shipment
During the first 30 days warranty parts will be shipped via overnight delivery. Determination
must be made before 2:00 PM US Central Time on any given weekday for next day delivery.
During the remainder of the first year warranty period, parts requirements will be filled via ground
shipment. The customer will have the option to request overnight or 2nd day parts shipping, but
will be charged the difference between the ground shipment cost and the overnight or 2nd day
cost.
26
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
WARRANTY
specifications
Return of Parts
SCIFIT is committed to continual improvement in the equipment we market. In order to meet
this commitment, the rapid return of defective parts is essential. The examination of the parts by
our engineering department leads to changes that insure the same problem does not re-occur.
Thank you in advance for your assistance!
When requested by SCIFIT, defective parts must be returned to the SCIFIT factory within 20 days
of receipt of replacement part. SCIFIT reserves the right to invoice buyer and collect for parts
where SCIFIT has requested the parts be returned and buyer has refused to do so.
Please follow these three easy steps for returning parts.
Step 1
Keep the box and packing material in which the new parts arrived.
Step 2
A prepaid return label will be in the parts box for only those parts that need to be returned. If no
prepaid return label is enclosed contact SCIFIT product support at
•
•
•
Phone: +1 (918) 359 - 2040
Toll Free: +1 (800) 745 -1373
Email: Service@SCIFIT.com
When ALL of the parts are received and inspected at the factory, a credit will be issued for the
original parts invoiced. Attention service companies – Labor invoices will NOT be paid until the
defective parts are returned to the factory.
Step 3
Wrap the defective part, place it in the box and affix the return label for a safe return.
.......................................................................
Service Labor
Where applicable, the SCIFIT product support personnel will arrange a local field service
technician to provide field support. Every effort will be made to schedule service during 48
business hours (8 hours per business day) following notification of a problem or as soon as
repair parts are available to the field service technician. Where possible, parts will be supplied in
advance of the field service technicians so that the product is repaired with one call.
.......................................................................
Purchased Parts
All purchased parts will carry a 12 month warranty. Refer to purchased parts shipments and
installation for more information.
.
This Limited Commercial Warranty supercedes the Limited Commercial Warranty printed in the
“Owner’s Operation Manual” for all SCIFIT Systems, Inc. products.
If you have questions or require additional information, please contact SCIFIT Systems, Inc. at:
•
•
•
Phone: +1 (918) 359 - 2040
Toll Free: +1 (800) 745 - 1373
Email: Service@SCIFIT.com
27
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
CERTIFICATIONS
specifications
If your StepOne machine has CE on the label followed by
“0434”, it is a medical machine. The label will be located
at the front of the machine next to the serial number.
0434
DECLARATION OF CONFORMITy
Address:
DECLARATION OF CONFORMITy
SCIFIT Ltd (UK)
Lexham House, Forest Road
Binfield, Berkshire, RG42 4HP
United Kingdom
Address:
EU Support: +44 1344 300022
Email: info@scifit.uk.com
Web: www.scifit.uk.com
EU Support: +44 1344 300022
Email: info@scifit.uk.com
Web: www.scifit.uk.com
Manufacturer: SCIFIT Ltd (UK)
Product:
SCIFIT Ltd (UK)
Lexham House, Forest Road
Binfield, Berkshire, RG42 4HP
United Kingdom
Manufacture:
Product:
Step One – Stepper
Class A (high accuracy class) per EN957-1:2005
Class S (commercial use class) per EN957-1:2005
SCIFIT Ltd (UK)
Step One – Recumbent Stepper
Class IIa device per rule 10 of Annex IX of 93/42/EEC.
Class A (high accuracy class) per EN957-1:2005
Class S (commercial use class) per EN957-1:2005
We, SCIFIT Systems, Inc., hereby declare that the product listed above is in conformity
with the essential requirements of the EC Council Directive 93/42 EEC Medical Device
Directive, as amended by 2007/47/EC and is in conformity with the following standards
and/or normative documents:
We, SCIFIT Systems, Inc., hereby declare that the product listed above is in conformity
with the following standards and/or normative documents:
ISO 9001:2008
EN 957-1:2005
EN 957-8:1998
EN 60601-1-2:2007
EN 60601-1:2006
EN 62304:2006
ISO 13485:2003
ISO 9001:2008
EN 957-1:2005
EN 957-8:2003
EN 60601-1-2:2007
EN 60601-1: 2006
EN 62304:2006
Steve Wright
European Business Development Director
April 2, 2013
Steve Wright
UK Managing Director
17 January, 2013
28
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Scientific Solutions For Fitness
SCIFIT
SCIFIT
Scientific Solutions For Fitness
SCIFIT
Serial Number
Business Phone (_____)
Comment
29
Scientific Solutions For Fitness
SCIFIT
www.SCIFIT.com
Thank You For Choosing
P2278 Rev. B
Referred by SCIFIT User
Saw at ____________________ Tradeshow
Other
Introduced by SCIFIT Dealer
Saw in ______________________ Magazine
Please Check the appropriate box(s) on how you were introduced to SCIFIT:
____Features____Quality____Price____Dealer___User Friendly___Appearance
Please rank the following reasons (1 through 6) for selecting SCIFIT with 1
being most important:
City/State
Entity Purchased From
Date Received
Model Purchased
Home Phone (____)
City/State/Zip
Address
Contact Name
Company Name
Register online at http://www.SCIFIT.com/warrantyregistration.shtml or
complete this form, fold it and return it to SCIFIT. We request you send this card
within 2 weeks after your equipment has been delivered to insure proper warranty
registration.
SCIFIT®
Warranty Card
WARRANTY
CARD
specifications
From
SCIFIT
5151 South 110th East Avenue
Tulsa, OK 74146
Important: Please keep this page for “Recalibration records”
Model Number:
Serial Number:
Date of Purchase:
Calibration Date
Medical Units:
Supplied By: SCIFIT Systems Inc.
User Manual: #A5583A (5/2013)
club or
DATE
certification location
tech
certified service company
1st
Recalibration
2nd
Recalibration
3rd
Recalibration
4th
Recalibration
5th
Recalibration
Please make extra copies for future use
initials
THIS PAGE LEFT BLANK INTENTIONALLY
Order online 24/7 at www.SCIFIT.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.352624, 2008/07/30-18:12:18 Create Date : 2013:05:20 09:09:59-05:00 Metadata Date : 2013:05:20 09:10:45-05:00 Modify Date : 2013:05:20 09:10:45-05:00 Creator Tool : Adobe InDesign CS4 (6.0.6) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11989 bytes, use -b option to extract) Instance ID : uuid:d2496119-9773-4359-8b0e-7720f2418c21 Document ID : xmp.did:59FCD6A357B7E2118728C01F3BD701FA Original Document ID : xmp.did:75CB3F3C22BDE011A191F7C999B10D5F Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:75CB3F3C22BDE011A191F7C999B10D5F, xmp.iid:76CB3F3C22BDE011A191F7C999B10D5F, xmp.iid:77CB3F3C22BDE011A191F7C999B10D5F, xmp.iid:78CB3F3C22BDE011A191F7C999B10D5F, xmp.iid:79CB3F3C22BDE011A191F7C999B10D5F, xmp.iid:A5181CA941BDE011A896FA8887C8D2EA, xmp.iid:A6181CA941BDE011A896FA8887C8D2EA, xmp.iid:A8181CA941BDE011A896FA8887C8D2EA, xmp.iid:5921444AD3BDE011951691E1783FCFAD, xmp.iid:5A21444AD3BDE011951691E1783FCFAD, xmp.iid:5B21444AD3BDE011951691E1783FCFAD, xmp.iid:5C21444AD3BDE011951691E1783FCFAD, xmp.iid:C241411E92BEE0119171FD818CC077D4, xmp.iid:AF0B740AB9C5E011B195B94CBD8CA6BB, xmp.iid:39E244FDAAC9E0118E6CDF1C3D3766C7, xmp.iid:3AE244FDAAC9E0118E6CDF1C3D3766C7, xmp.iid:12B9C832AE9BE211A45DC7052804F241, xmp.iid:F55067A6DB9BE2118C4F8964206C5EE2, xmp.iid:D44F2840439DE2119125A90C3144C179, xmp.iid:D54F2840439DE2119125A90C3144C179, xmp.iid:D64F2840439DE2119125A90C3144C179, xmp.iid:460BC01B049EE211878EDBDB6CA16108, xmp.iid:470BC01B049EE211878EDBDB6CA16108, xmp.iid:480BC01B049EE211878EDBDB6CA16108, xmp.iid:0E9EE64F5DA0E21189EDE9351E9EC43C, xmp.iid:0C26FA7290A0E2118774EC8A00F52E95, xmp.iid:97E7DCEEE5A1E21189F883AB67F414E2, xmp.iid:98E7DCEEE5A1E21189F883AB67F414E2, xmp.iid:91C132F70CA2E211824FF855B546E427, xmp.iid:BC8E6D5424A2E211BB4B840D17E07338, xmp.iid:5166D92BD6A2E2118B90FE2F754DB526, xmp.iid:2B3A7DE1E1A2E2118E4FD0E19E5534EA, xmp.iid:2C3A7DE1E1A2E2118E4FD0E19E5534EA, xmp.iid:2D3A7DE1E1A2E2118E4FD0E19E5534EA, xmp.iid:2E3A7DE1E1A2E2118E4FD0E19E5534EA, xmp.iid:2F3A7DE1E1A2E2118E4FD0E19E5534EA, xmp.iid:BE89F3B26EA3E211A7EA8CF1327B6449, xmp.iid:E29D766E47ABE2118A34FFBB99831842, xmp.iid:E59D766E47ABE2118A34FFBB99831842, xmp.iid:58AE7C872EACE211AFEAEC83F96B2566, xmp.iid:59AE7C872EACE211AFEAEC83F96B2566, xmp.iid:6309F74A34ACE2118D56C7688A0DE66A, xmp.iid:B118D2DEB6ADE211A0EDDD3CD4A40286, xmp.iid:B318D2DEB6ADE211A0EDDD3CD4A40286, xmp.iid:792A0D756CAEE21189E1FA202523C4F7, xmp.iid:A7E6D2016DAEE21194C7A720E7209D3A, xmp.iid:7766C4596DAEE2118E79ED123B8CA146, xmp.iid:AE7628C26DAEE211A14BA1A4C41A06B3, xmp.iid:AF7628C26DAEE211A14BA1A4C41A06B3, xmp.iid:56FF5CD1D0B1E211832EE6046BFF41E0, xmp.iid:57FF5CD1D0B1E211832EE6046BFF41E0, xmp.iid:58FF5CD1D0B1E211832EE6046BFF41E0, xmp.iid:59FF5CD1D0B1E211832EE6046BFF41E0, xmp.iid:5BFF5CD1D0B1E211832EE6046BFF41E0, xmp.iid:F46652627CB2E2118B82D822E598CE60, xmp.iid:1EE661128DB2E211AE56BF56A05F8CF4, xmp.iid:CB4D78FD95B2E2119F5090CECCB12551, xmp.iid:CD4D78FD95B2E2119F5090CECCB12551, xmp.iid:EE35E8692CB3E211962397A746D80A0A, xmp.iid:F035E8692CB3E211962397A746D80A0A, xmp.iid:4268447F58B6E211BF12A13BE87E9460, xmp.iid:F482F2F85FB6E2119E44DC16849B1966, xmp.iid:F682F2F85FB6E2119E44DC16849B1966, xmp.iid:F782F2F85FB6E2119E44DC16849B1966, xmp.iid:D6AA790021B7E21181DEEF90550C1157, xmp.iid:7222154032B7E21196D1D05E55D42AC2, xmp.iid:7322154032B7E21196D1D05E55D42AC2, xmp.iid:58FCD6A357B7E2118728C01F3BD701FA, xmp.iid:59FCD6A357B7E2118728C01F3BD701FA, xmp.iid:5AFCD6A357B7E2118728C01F3BD701FA, xmp.iid:600F9F7423B8E2119130CF1FFCDAB541, xmp.iid:5D0C5121ABB8E211B3CE839A31889896, xmp.iid:5E0C5121ABB8E211B3CE839A31889896, xmp.iid:5F0C5121ABB8E211B3CE839A31889896, xmp.iid:600C5121ABB8E211B3CE839A31889896, xmp.iid:610C5121ABB8E211B3CE839A31889896, xmp.iid:A312276A6CBDE211B2138186A55A1535, xmp.iid:DF6284B88CBDE21181BAFB089A99738F, xmp.iid:1D9D01EC56C1E2118E25BCD268217B08 History When : 2011:08:02 11:12:35-05:00, 2011:08:02 11:32-05:00, 2011:08:02 11:32-05:00, 2011:08:02 13:51:16-05:00, 2011:08:02 13:55:19-05:00, 2011:08:02 14:57:32-05:00, 2011:08:02 15:08:59-05:00, 2011:08:02 16:14:56-05:00, 2011:08:03 08:20-05:00, 2011:08:03 08:36:26-05:00, 2011:08:03 09:12:07-05:00, 2011:08:03 09:19:20-05:00, 2011:08:04 13:45:34-05:00, 2011:08:13 09:32:15-05:00, 2011:08:18 10:01:45-05:00, 2011:08:18 10:08:34-05:00, 2013:04:02 10:58:45-05:00, 2013:04:02 16:27:14-05:00, 2013:04:04 11:18:13-05:00, 2013:04:04 13:30:15-05:00, 2013:04:04 15:08:04-05:00, 2013:04:05 10:18:45-05:00, 2013:04:05 14:11:27-05:00, 2013:04:05 15:42:37-05:00, 2013:04:08 10:02:20-05:00, 2013:04:08 16:08:23-05:00, 2013:04:10 08:52:50-05:00, 2013:04:10 11:24:22-05:00, 2013:04:10 13:32:14-05:00, 2013:04:10 16:19:29-05:00, 2013:04:11 13:32:31-05:00, 2013:04:11 14:56:20-05:00, 2013:04:11 15:12:44-05:00, 2013:04:11 15:15:14-05:00, 2013:04:11 15:15:14-05:00, 2013:04:11 15:41:39-05:00, 2013:04:12 07:44:52-05:00, 2013:04:22 07:23:25-05:00, 2013:04:22 07:49:03-05:00, 2013:04:23 10:57:41-05:00, 2013:04:23 11:10:39-05:00, 2013:04:23 11:47:45-05:00, 2013:04:25 09:46:10-05:00, 2013:04:25 10:18:48-05:00, 2013:04:26 07:26:01-05:00, 2013:04:26 07:29:57-05:00, 2013:04:26 07:32:25-05:00, 2013:04:26 07:35:20-05:00, 2013:04:26 07:36:47-05:00, 2013:04:30 15:01:59-05:00, 2013:04:30 15:23:40-05:00, 2013:04:30 15:26:43-05:00, 2013:04:30 15:37:40-05:00, 2013:04:30 16:05:32-05:00, 2013:05:01 11:30:06-05:00, 2013:05:01 13:29:34-05:00, 2013:05:01 14:33:24-05:00, 2013:05:01 14:57:40-05:00, 2013:05:02 08:30:11-05:00, 2013:05:02 10:48:29-05:00, 2013:05:06 09:23:18-05:00, 2013:05:06 10:16:48-05:00, 2013:05:06 16:05:36-05:00, 2013:05:06 16:15:50-05:00, 2013:05:07 09:18:34-05:00, 2013:05:07 11:22:02-05:00, 2013:05:07 13:29:04-05:00, 2013:05:07 15:49:41-05:00, 2013:05:07 15:49:41-05:00, 2013:05:07 16:15:56-05:00, 2013:05:08 16:08:39-05:00, 2013:05:09 08:19:51-05:00, 2013:05:09 08:25:47-05:00, 2013:05:09 09:06:21-05:00, 2013:05:09 09:07:53-05:00, 2013:05:09 09:19:44-05:00, 2013:05:15 09:33:30-05:00, 2013:05:15 13:24:46-05:00, 2013:05:20 09:09:44-05:00 History Software Agent : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0 History Changed : /, /metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /metadata, /;/metadata, /, /, /, /, /, /, /, /, /, / Derived From Instance ID : xmp.iid:58FCD6A357B7E2118728C01F3BD701FA Derived From Document ID : xmp.did:2E3A7DE1E1A2E2118E4FD0E19E5534EA Derived From Original Document ID: xmp.did:75CB3F3C22BDE011A191F7C999B10D5F Derived From Rendition Class : default Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:844a21e0-931d-4e9d-9e65-5b638036ec88, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:fa5d7537-26f9-4384-ae57-63bacb9080f6, uuid:0c8e2d42-ac57-4033-9701-2ec3e4f6bbf6, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:51fe203b-82c6-4f2d-8001-5c69fdef524a, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:d3944c2e-e84c-41e6-a2a9-b7a09e10391c, uuid:c2005d00-d6c0-4ae8-a565-2743d7965c60, uuid:a70d46f5-eb34-4cc7-b9de-ce10ddd2c7ca, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:fa5d7537-26f9-4384-ae57-63bacb9080f6, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:503a5296-ab9f-4e2f-86f3-a46b47e840d8, uuid:aea12fb1-2d1a-4e78-af19-5d87d498957a, uuid:0cf7a73b-cb0a-48d7-a90d-4163deba33d2, uuid:b71460ad-e538-4aa5-a6f5-f6215c1fc8d6, uuid:4194c606-a5e2-4432-9036-4f814de8d8fa, uuid:89652db9-55c5-4f85-8c62-48fc78bcb539, uuid:887a35a3-b01f-430a-989a-5a0ec9df4588, uuid:2fcd7a39-aa29-4c63-9493-82038f875602, uuid:22584b46-991f-4228-9f23-d2b03e96d759, uuid:5bd21fdf-4513-492b-b74a-c6e96e58ba56, uuid:720fd1ab-d6f6-48df-8de7-30e2c3804b41, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:57bbf16b-a157-442a-834f-3408577f6ae0, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, uuid:cffa4ddd-b3fb-4701-9281-14cd23048985, uuid:17b118dd-4af1-4119-86a7-8ca1e6e4951b, f749fdc7-a52c-11e2-0000-3e6d4ffa3b46, 3173dbd9-75ee-11e1-0000-9c900695f486, b0f49ec6-a52c-11e2-0000-4a50bc46a825, 5b2d02da-75ee-11e1-0000-72154d078365, uuid:844a21e0-931d-4e9d-9e65-5b638036ec88, uuid:844a21e0-931d-4e9d-9e65-5b638036ec88 Manifest Reference Document ID : xmp.did:81B73B8F9D37E111B879F4AAC7AB9949, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:EBA601FC51B2E2119CDDE85F9798E017, xmp.did:74D7E834E3A2E2118FA4B7EC7B9063E6, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:BBE86411DB9BE211A6D5B90EABD3AB21, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:797D2891539DE211B0CCEF99A04FDC69, xmp.did:76D7E834E3A2E2118FA4B7EC7B9063E6, xmp.did:7D3EA26027B3E211B169A78191E5DE19, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:EBA601FC51B2E2119CDDE85F9798E017, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:64F4372B4AB6E2118E7A89FCEC536FDF, xmp.did:813EA26027B3E211B169A78191E5DE19, xmp.did:823EA26027B3E211B169A78191E5DE19, xmp.did:7FE837354CA0E2118009A2D4DD7D5CFB, xmp.did:833EA26027B3E211B169A78191E5DE19, xmp.did:15EA7259ACADE211B21FB099835E552B, xmp.did:16EA7259ACADE211B21FB099835E552B, xmp.did:853EA26027B3E211B169A78191E5DE19, xmp.did:843EA26027B3E211B169A78191E5DE19, xmp.did:1BEA7259ACADE211B21FB099835E552B, xmp.did:19EA7259ACADE211B21FB099835E552B, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:EDA601FC51B2E2119CDDE85F9798E017, xmp.did:7E3EA26027B3E211B169A78191E5DE19, xmp.did:3C9460961ADAE011B8F1D58EBFB77340, xmp.did:7E3EA26027B3E211B169A78191E5DE19, f749fdc7-a52c-11e2-0000-3e6d4ffa3b46, 3173dbd9-75ee-11e1-0000-9c900695f486, b0f49ec6-a52c-11e2-0000-4a50bc46a825, 5b2d02da-75ee-11e1-0000-72154d078365, xmp.did:81B73B8F9D37E111B879F4AAC7AB9949, xmp.did:81B73B8F9D37E111B879F4AAC7AB9949 Doc Change Count : 60228 Format : application/pdf Producer : Adobe PDF Library 9.0 Trapped : False Page Count : 36 Creator : Adobe InDesign CS4 (6.0.6)EXIF Metadata provided by EXIF.tools