ABS Technical Information 2011

User Manual: ABS Technical Information 2011

Open the PDF directly: View PDF .
Page Count: 209

Download
Open PDF In Browser	View PDF

ABS
Pipe, Fittings & Valves
for cooling, chilled
water, chemicals and
drinking water
Technical Information 2011

Technical Information
For technical data including operating &
control pressures, dimensions as well
as the use of accessories, please refer to
data sheets which are available in both
printed and electronic (pdf) formats from
the Coventry Sales Office (details on back
cover).
For details of our range of plastic pipe,
fittings, hand and actuated operated valves
in PVC-U, PVC-C, PP, PVDF, PFA and PE
as well as our INSTAFLEX PB and SIGNET
measurement and control range, please
request Price Lists from the Coventry Sales
Office.

Important Note
The technical data given in this catalogue is for
preliminary information purposes only and is
published without guarantee. All pictures and
drawings are for illustrative purposes only and
should not be regarded as wholly accurate in every
detail. We reserve the right to withdraw or to alter
the specification of any product without notice.
Please consult our Terms and Conditions
www.georgefischer.co.uk

Application Knowledge
GF ABS
Water, chilled water, cooling, drinking water & chemical conveyance
Fields of Application:
Water treatment
Chemical industry
Drinking water
Swimming pools
Marine industry
Food and beverage production
Building services
Product Range
Pipes
Fittings
Manual valves
Actuated valves
Jointing systems
Flow, pH, conductivity, turbidity, level, pressure, chlorine
and temperature measurement
Available in the widest standards available: BS Inch, EN/ISO metric
EN/ISO - d16 - d315mm
BS Inch - 3/8" - 8"
Application range:
Resistant to bases, weak acids and salts, suitable for
drinking water
-40°C to 60°C
Jointing system:
Tangit gap filling solvent cement

i

Worldwide Approval
GF ABS is manufactured and tested to the highest quality. Our own
compound and strict quality controls for each raw material delivery
form the basis for our high quality products.
Our own independently accredited test laboratory for components of
plastic piping systems according to EN ISO 45001 assures the highest
quality.
Quality and environmental management systems according to ISO
9001 and 14001 are the basis for the continuous improvement of our
performance.
Third party approvals for GF ABS offer peace of mind to customers
using the products.

Approved for use within public water
supplies and by the Secretary of State.
GF ABS is listed in the "List of Approved
Products" published by the DWI

ii

Distribution, Warehousing and Technical Support
The excellent location of the Distribution Centre in Coventry offers
the latest in state of the art distribution and warehousing systems.
An enhanced delivery system and 24 hour warehousing programme
guarantees prompt delivery to GF customers nationwide.
Our Technical support staff are qualified to offer you advice and guide
you through the wealth of products GF can supply. We make sure you
feel confident that the product matches your requirements and leaving
you fully assured that GF is your preferred supplier.

GF Fleet of delivery vehicles

Tracking delivery of your order

Automation
GF manufacture a complete range of actuators and actuated valves
which includes pneumatic as well as electric actuators. Thanks to
their modular design, the actuators can be configured specifically to
your application (eg. positioner, additional limit switches, fail-safe unit,
AS-Interface connection, etc.) Housing material is robust and resistant
PPGF. All actuators are sized specific to GF valves, resulting in an increased service life. Connections to third party valves are no problem
due to EN ISO 5211 interface.

SIGNET
The GF Signet range of flow control and measurement equipment is
at the cutting edge of technology in this field.
Flow, pH, level, conductivity, temperature, 				
turbidity, chlorine, pressure and						
ORP are all catered for 							
within the range.

iii

General
Acrylonitrile-Butadiene-Styrene (ABS) is a versatile standard polymer. In addition to its application
in piping systems, ABS is mainly common in
automotive applications and in high-quality
household devices. The wide area of application
relates to the versatile characteristic profile of
ABS. It can be adapted to the application by
varying the composition of its three components:
acrylonitrile, styrene and polybutadiene. While
acrylonitrile provides strength to the material and
gives ABS an improved chemical resistance
relative to polystyrene, the styrenic component
provides both strength and a quality surface
finish. The chemically bound polybutadienerubber particles, on the other hand, give the
material its toughness and impact strength, even
at very low temperatures. The ABS used by GF
shows a good balance between toughness and
strength, making it especially suitable for low
temperature applications. Accordingly the areas of
application are mainly refrigeration and air
conditioning systems as well as water treatment.

iv

The advantages of ABS include:
• high impact strength even at low temperatures
• corrosion resistance
• simple installation via solvent cement joints
• low heat conductivity
• halogen free
• non-toxic
• biologically inert; no support of microbial growth
• low weight
• low pressure losses due to smooth surfaces
• good abrasion resistance
• problem-free recycling

Mechnical properties
In addition to the good strength and stiffness,
ABS is especially characterised by a very high
impact strength. Impact strength is a measure of impact energy that the material absorbs
until it breaks. For this test, a specimen is
weakened with a sharp notch and then struck.
Without a notch, there is no breakage of the
test specimen. The exceptionally high notched
impact strength values, even at low temperatures, indicate the material's high robustness
and tolerance against surface damage. GF ABS
pipes are routinely tested for their toughness
according to EN ISO 15493. In this test, a weight
falling from, a height of 2 metres hits the pipe
that has been cooled to 0 °C. The mass of the
falling weight varies, depending on the pipe
dimensions, from 0.5 (dn = 20mm) to 9 kg (dn
= 225 mm). The high load in the falling-weight
test ensures that the excellent toughness of the
material is not reduced as a result of processing
into pipe. The internal pressure resistance is
provided by the hydrostatic strength curve based
on the EN ISO 15493 standard (also see the ABS
Calculation and Long-Term Behaviour section).
The application limits for pipes and fittings, as
shown in the pressure-temperature diagram,
can be derived from these curves.
Chemical, weathering and abrasion resistance
ABS is characterised by its good resistance to
various chemicals. In general, ABS is resistant to
water, salt solutions and most dilute acids and
bases. Its resistance to alcohols, aliphatic
hydrocarbons, oils and greases is, however, to be
regarded as limited. ABS is not resistant to
concentrated mineral acids, organic acids and
solvents such as esters, ketones and chlorinated
and aromatic hydrocarbons. For detailed information, please refer to the detailed list of chemical
resistance from GF or contact your local GF
subsidiary. If the ABS piping system is exposed to
direct sunlight over a long period, its surface loses
its shine and the colour shifts to light grey. Due to
the very high impact strength of ABS, the resulting
loss of toughness generally causes no problems
in moderate climate zones. For extreme weather
conditions or very high loads on the piping system,
we nevertheless recommend protecting the surface
from direct sunlight. In addition to the excellent
impact strength, the polybutadiene rubber particles
in ABS cause an outstanding resistance against
abrasion. Because of this, ABS piping systems
have been used for a long time to transport solids
and slurries, for example, in mining applications.
Experience has shown that ABS, as well as PE,

offers considerable advantages over metal and other
plastics for many such applications. Please contact
GF if you are planning such an application. We
would be glad to advise you about the suitability of
our ABS, PE and other materials for your media.
Thermal properties
The outstanding characteristics of ABS allow its
application in a wide temperature range between
- 40 °C and +60 °C. At higher temperatures, the
tensile strength and stiffness of the material drop
and at lower temperatures, they rise. Therefore,
please consult the pressure-temperature diagram
for your maximum working temperature. As all
thermoplastics, ABS shows a higher thermal
expansion than metals. This is not a problem if the
thermal expansion is taken into account during the
planning stage of the piping system. The expansion
coefficient amounts to 0.1 mm/m K in the application
temperature range.
At 0.17 W/m K, the heat conductivity of ABS is very
low. Because of the insulation properties of the
material and the resulting savings in energy or
insulation, an ABS piping system is notably more
economical in comparison to a system made of copper
(370 W/m K) or other metals. Should there be a need
for additional insulation, e. g. in cooling applications,
GF offers COOL-FIT, a system specially dedicated to
this market. COOL-FIT it is a preinsulated ABS
system that has the advantage of quick and easy
installation.
Combustion behaviour
ABS self-ignites at temperatures exceeding 450 °C.
ABS burns when exposed to an open flame.
After removing the flame, the material continues
burning. The oxygen index amounts to 19 %.
(Materials that burn with less than 21 % of oxygen in
the air are considered to be flammable). According
to UL-94, ABS has a HB (Horizontal Burning)
flammability coefficient and falls into building
material class B2 (conventional inflammable,
non-dripping) according to DIN 4102-1. Basically,
toxic substances are released by all burning processes. Carbon monoxide is generally the
combustion product most dangerous to humans.
When ABS burns, primarily carbon dioxide, carbon
monoxide and water are formed. Tests have shown
that the relative toxicity of the products of combustion
are similar or even lower than those of natural products such as wood, wool and cotton. ABS combustion gases are not corrosive. Nevertheless, the burning
forms soot. Because of this, smoke develops during
combustion. Water, foam and carbon dioxide are
suitable fire-fighting agents.

v

Electrical properties
ABS has good electrical insulation capacity. The
specific volume resistance is 3.5 x 1016 Ωcm and
the specific surface resistance is 1013 Ω.
These figures have to be taken into account
wherever there is a danger of fires or explosion.

vi

Design of metric and inch
piping systems

The following pressure/temperature diagram
for ABS pipes and fittings is valid for a lifetime
of 25 years.
The design factor of 2.1 for inch-based
systems and 1.8 for metric systems
recommended by GF is incorporated.
It can be used for water or media resembling
water, in other words, media which have no
derating factor regarding the chemical resistance.
Remark: Please take into account the
pressure/temperature diagrams for valves and
special fittings. Because of the construction
and/or sealing material used, differences
are possible when compared with pipes and
fittings. This information can be found in the
planning fundamentals of the relevant types of
valves, respectively special fittings.
The influence of the anti-freeze compound has
to be taken into account when calculating the
allowable operating pressure. Please contact
your GF representative for further information.
Attention: According to the 10 °C curve in the
long-term diagram for ABS, the permissible
pressure in the temperature range -50 ° to
+10 °C can be
• 7.5 bar for the PN6 system.
• 11.8 bar for the PN10 system.
The maximum pressure for the PN16 system
has been limited to 16 bar.

vii

General
Thermoplastics are subject to greater thermal
expansion and contraction than metals. Pipes
installed above ground, against walls or in
ducts, especially those exposed to temperature variations, require changes in length to be
taken up in order to prevent extra strain on
the pipes. Length changes can be taken up by:
a) flexible sections
b) compensators
Flexible sections are the most common
solution, being the simplest and the most
economical. The calculations for and the
positioning of flexible sections are therefore
described in detail.

viii

Fundamentals
The low modulus of elasticity of thermoplastics allows changes in length to be taken up
by special pipe sections, where pipe supports
are positioned so that they can take advantage
of the natural flexibility of the material. The
length of such sections is determined by the
diameter of the pipeline and the extent of the
thermal expansion to be compensated.
Flexible sections arise naturally at any
branching or change in direction of the
pipeline. The movement LB of the flexible
section as a result of a change ΔL in the
length must not be restrained by fixed pipe
brackets, protrusions wall, girders or the like.

Calculation of change in length
The change in length caused by temperature can
be calculated using the following formula:

The installation temperature must therefore
be incorporated into the calculations as well
as the maximum and minimum operating
temperatures. It is preferable to use "+"
to indicate expansion of the pipe and "-"
to indicate contraction. The larger change in
length is the one to be used for determining
the required length of the flexible section.

with:
• ΔL = temperature-related change in length (mm)
• L = length of the pipe section (m)
• ΔT = difference of temperature (K)
• α = coefficient of linear expansion (mm / m K)

ix

x

xi

xii

xiii

Recommendations for installation
Length changes in pipe sections should
always be accommodated through the arrangement of fixed brackets. The following
examples show how the changes can be
distributed in pipe sections by suitable
positioning of fixed brackets.

Pre-stress
Length changes in pipe sections should always
be accommodated through the arrangement of
fixed brackets.
The following examples show how the changes
can be distributed in pipe sections by suitable
positioning of fixed brackets.
Expansion loops can be installed to take up
changes in length when flexible sections cannot
be included at a change in direction or branch in
the pipeline or if substantial changes in the length
of a straight section need to be taken up. In such
a case the compensation for changes in length is
distributed over two flexible sections.

xiv

Installing compensators
The low modulus of elasticity means that the reaction force of plastic pipes to thermal changes is
low compared to metal pipes. This makes normal
compensators designed for use with metal pipes
unsuitable because of their high inherent resistance. Only freely moving compensators may be
used in plastic pipe systems, i. e. those with a low
resistance. The following compensators may be
considered: rubber compensators, PTFE
corrugated compensators or suitably selected
metal multi-disc compensators.
Carefully placed fixed points should be used when
fitting compensators for the regulation of the pipe
in order to ensure their unhindered operation.
The installation temperature provides the basis for
the calculations to ensure this.

Installing Valves
Valves should be secured as directly as possible,
so that the actuation forces are transmitted
directly and not via the pipeline. Valve brackets
or valves from GF with an integrated fastening
device are used to securely fasten plastic valves.
These valve brackets are also used to bear the
loads of the valve and filling weight of the pipeline. Any changes in length which arise can be
prevented with the appropriate fixed points
before or after the valve. You will find more
information under the respective valve types.

Installing pipework under plaster or
embedding it in concrete
Installing Valves
Installing pipework under plaster or embedding
it in concrete
Padded pipework
Where pipework is installed under plaster or
embedded into concrete, the flexible sections
at bends and branches must be padded for the
calculated distance H, as also must any
branches and elbows included in the affected
section. Use only flexible materials as padding,
such as glass wool, mineral wool, foam or
similar.

xv

Unpadded pipework
Unpadded pipes can also be plastered or
concreted in directly. Since the axial stress
arising from internal pressure is half as great as
the circumferential stress, pipelines can support
limited additional axial stress without becoming
overloaded. In such cases the level of stress
expected must be calculated. The same is true
of any section of pipe between two fixed points
where no allowance has been made for changes
in length. The load at the fixed points must be
calculated and considered when planning the
fixed points. The distance between pipe brackets
in such cases may have to be reduced from the
normal values in order to prevent bowing
in the pipeline.
Care must be taken to avoid creating cavities
when plastering or concreting in the pipeline,
because under unfavourable conditions these
can become areas of stress concentration.
A rich plaster mixture (1 : 3 to 1 :4) should be
used to allow the forces arising from temperature variations to be transmitted away without
causing the plaster to crack.

xvi

Pipe support for plastics pipes
Plastic pipe systems should be installed using
supports designed for use with plastics and
should then be installed taking care not to damage or over stress the pipe.
Arranging Loose Brackets
What is a loose pipe bracket?
A loose pipe bracket is a bracket which allows
axial movement of the pipe, to allow stress
free compensation of temperature changes
and compensation of any other operating
condition changes

Spacer to avoid clamping
Axial movement of the pipeline must not be
prevented by fittings placed next to pipe
brackets or by any other component affecting
the diameter of the pipe. Sliding brackets and
hanging brackets permit the pipe to move in
different directions. Attaching a sliding block
to the base of the pipe bracket permits free
movement of the pipe along a flat supporting
surface. Sliding and hanging brackets are
needed in situations where the pipeline changes
direction and free movement of the pipe must
be allowed.
Arranging fixed points
What is a fixed point?
A fixed pipe bracket is a bracket which prevents
the pipe from moving in any direction. The aim
of which is to control system stresses caused by
temperature changes.

The inner diameter of the bracket should be
larger than the outside diameter of the pipe
to allow free movement of the pipe. The inner
edges of the brackets should be free from any
sharp contours which could damage the plastic.
If the brackets’ inside diameter is not larger
than the pipe then the bracket should not be
fully tightened, thus allowing the pipe to move.
Another method is to use brackets with spacers
which also avoids clamping the bracket on the
pipe.

xvii

Starting from the dimension d90 the
KLIP-IT brackets must be installed
standing, like shown in the assembly
examples. The support distances given
in the following, specified for the KLIP-IT
tubing clamps, apply only to this mounting method.

Information:
Pipe brackets must be robust and mounted firmly to
be able to take up the forces arising from changes in
length in the pipeline. Hanging brackets or KLIP-IT
pipe brackets are unsuitable for use as fixed points.
KLIP-IT pipe brackets
These robust plastic pipe brackets can be used not
only under rigorous operating conditions, but also
where the pipework is subject to aggressive media
or atmospheric conditions. They may be used for all
materials of pipes. Don't use KLIP-IT pipe brackets
as fixed points!

xviii

Using the tables for pipe bracket spacing
Plastic pipelines need to be supported at
certain intervals depending on several
factors: the material, the average pipe wall
temperature, the density of the medium
transported and the size and wall thickness
of the pipe. Determining the spacing between
pipe brackets is based on the permissible
deflection of the pipe between consecutive
brackets.
Information:
The values given in the tables apply only to
pipelines which are freely movable in the
axial direction.
Pipelines which are fastened tightly in the
axial direction (fixed installations) must be
checked for buckling. In most cases, this
leads to a reduction of the maximum
inner pressure and shorter distances
between the support brackets.
Furthermore, the forces that act on the fixed
points must also be taken into consideration.
For assistance, please contact your nearest
GF representative.

xiv

Solvent cement jointing calls for adequate
technical know-how, which can be acquired in
the appropriate training courses. Your GF
representative will gladly provide you with
information about training possibilities.
The dimensions of GF pipes, fittings and valves conform generally to the various national
standards as well as to ISO 727-1 concerning
dimensions of sockets. Our fittings and valves
can be used with any ABS pipes whose outside
diameter tolerance conforms to ISO 11922-1.
According to ISO 727-1 the following minimal
cement lengths are as shown in the table:

Cutting the pipe to length

Chamfering the pipe

xx

Note: The quantities specified above are to be
understood as practice-orientated maximum
values. In principle the quantities depend on
gap dimensions, temperatures, working
technique.

Solvent cementing equipment

Preparations
The pipe must be cut off at right angles.
Remove the inside edges and chamfer the
outside ones as illustrated in the sketch. Only
then is an optimal solvent cemented joint
possible.
Important: Well-chamfered pipe ends prevent
the layer of cement from being removed as the
pipe is inserted into the fitting

Marking the jointing length
Wipe the outside of the pipe and the inside
of the socket with a clean cloth to remove
obvious dirt. Marking the jointing length on the
pipe end makes it possible to check afterwards
whether the pipe has been inserted to the full
extent of the socket.
Note: If the outside diameter of the pipe and
the inside diameter of the socket are at
opposite extremes of their tolerances, then the
pipe cannot be inserted dry into the fitting
socket. This will only become possible once
the cement has been applied.

xxi

Checking the cement
The Tangit ABS cement is supplied ready for use.
Stir thoroughly before using! Cement of the
correct consistency will run evenly from a
wooden spatula held at a slant. Cement which
no longer runs smoothly is unusable.
The cement must not be thinned.
For more information please consult the safety
datasheets under the following link:
https://www.sdb.henkel.de/index.cfm
Cement and cleaner should be stored in a cool,
dry place (5–35 °C)! Under these conditions the
cement and cleaner are durable for 24 months
starting from the date of filling (imprinted on
the tin).
Cementing
Clean the outside of the pipe end and the inside
of the socket thoroughly with ABS cleaner and
absorbent paper.
Use a fresh piece of paper for each component.
If the surfaces are free from grease, cleaning
with absorbent paper and Tangit cleaner is not
absolutely necessary for ABS.
But remove any condensation which may have
formed on the parts.

Cleaning the pipe and socket
ABS pipes should be cemented at temperatures
between +5 °C and +40 °C. Take the following
protective measures if the temperatures deviate
from the above:
At low temperatures, condensation or ice water
which may have formed must be removed, e. g.
with warm air. Cement and cleaner should be
stored at room temperature. Please observe the
waiting times mentioned in the following until
the next cementing.
Avoid uneven overheating (->shorten the opening
time) when cementing at higher temperatures by
protecting the jointing area from direct sunlight.
The quick curing time of the cement necessitates that the joint is made within the opening
time after application of the cement has started.
The opening time of the ABS cement varies with
the ambient temperature and the thickness of
the cement applied:

Important: Pipe end and fitting socket must be
dry and free from grease and dirt and must not
be touched after cleaning.

xxii

xiii

Begin by applying a normal layer of cement to
the fitting and then a thicker one to the pipe end
with firm brush pressure. Work in well.
The brush strokes should always be in an axial
direction. To ensure that both jointing surfaces
are completely covered with a smooth, even layer
of cement, the brush should be generously
loaded with cement.

A bead of excess solvent cement around the
complete external circumference of the joint
and a slightly smaller bead again around the
complete internal circumference show that
the joint has been performed correctly.
After use, clean the brush of excess cement
with dry absorbent paper and then clean
thoroughly using TANGIT cleaner. Brushes
must be dry before being re-used (shake out).

Applying the cement
The joints can be made single-handed for pipes
with diameters up to d63 mm.
For d75 mm and larger pipes, two people are
needed to apply the cement to the pipe end and
fitting socket simultaneously in order to avoid
exceeding the maximum opening time of the
cement.
After the cement has been applied, insert the
pipe to the full depth of the socket immediately
without twisting and bring them into the correct
alignment. Ensure that the outlet of the fitting is
in the correct position. Hold them in this position
to allow the cement to set.

Replace the lid of the cement tin during
work breaks
Replace the lid of the cement tin after use to
prevent the solvent evaporating. Using the
conical lid allows leaving the brush in the
cement tin during breaks. Solvent cement
dissolves ABS. Pipes and fittings must
therefore not be laid on or allowed to come
into contact with spilled cement or paper
containing cement residues.

Up to the dimension d140 wait at least
10 minutes before the next joint, extend the
waiting time at temperatures under 10 °C to 15
minutes.
For the dimensions d160 to d225 wait at least 30
minutes before the next joint, extend the waiting
time at temperatures under 10 °C to 60 minutes.
In order to avoid any forces on the cemented
components by the weight of the piping system a
support of the pipeline is necessary.
Remove any surplus cement immediately, using
absorbent paper.

xiv

xxiii

Do not close off cement pipelines during
the drying process. This is particularly important at temperatures below + 5 °C, when
there is otherwise a danger of damaging the
material.
After the drying process (see waiting times
in the following table) the pipelines can be
filled. It is recommended to flush the pipeline before use, and leave it filled with water
if it is not directly used.
To ensure the traceability (if necessary) of
the used Tangit ABS batch, place the batch
marking on the test report. This batch
marking is attached to each dispatch unit.
If several batches are used in one project,
place one marking from each batch on the
test report.

Attention: Care should be taken, if the
medium has a large temperature difference
to the installation temperature.
Please consult your local GF Representative.
Internal pressure test with water
This pressure test shall be carried out
according to the information given in the
chapter "Internal pressure test with water or
a similar incompressible fluid". The waiting
time after the last joint until the pressure
test is shown in the following table:

Attention: Care should be taken, if the
medium has a large temperature difference
to the installation temperature.
Please consult your local GF Representative.

Drying period and pressure testing
of ABS piping systems d16 - d225
The length of the drying period before the
joint may be subjected to testing or operating pressure depends on the ambient temperature, the dimension and the tolerances.
The following tables shows the different
waiting times.
Remark: For temperatures above 20 °C the
test pressure must be reduced according to
the requirements given in the chapter "Final
testing and commissioning".

xxiv

Internal pressure test or leak tightness test
with gas/air
Due to the risk of a pressure test with a
compressible test medium this pressure
test shall be carried out only in exceptional
cases! Please consult also the safety precautions given in the chapter "Internal pressure test of ABS pipelines". The following
diagram shows the waiting time depending
on the test pressure for a ambient
temperature between 10 to 30 °C:

xv

Repair works
If the pipeline is only subjected to the
operating pressure with fluids, e. g. after
adaptation or repair works, the following
rule of thumb for the waiting time applies,
which is depending on the diameter:
Dimension d16 up to d140

Protect pipes and fittings from spilled
solvent cement, cleaner and absorbent
paper which has been used to wipe off
cement. Do not dispose of surplus solvent
cement or cleaner in drainage systems.
The use of protective gloves is recommended to avoid contact with skin. If the cement
or the cleaner get in contact with eyes,
rinse immediately with water. Consult a
doctor! Immediately change clothes that
have solvent cement on them.
Always obey the safety regulations issued
by the authorities responsible.

Safety precautions
Tangit cement and cleaner contain highly
volatile solvents. This makes good ventilation or adequate fume extraction essential
in closed spaces. Since the solvent fumes
are heavier than air, extraction must occur
at floor level, or at least below the working
level. Place paper which has been used for
cleaning or for the removal of surplus
cement into closed containers to minimise
the amount of solvent fumes in the air.
Cement and cleaner are inflammable.
Extinguish open fires before commencing
work. Switch off unprotected electrical
apparatus, electric heaters, etc. Do not
smoke!
Discontinue any welding operations.
Furthermore, observe all instructions
issued by the solvent cement manufacturer
(e.g. label of the tin and any supplementary
documentation).

xvi

Adequate ventilation
of the workplace

No open flames when cementing.
No smoking.

xxv

General
The internal pressure test is done when installation work has been completed and necessitates an operational pipeline or operational
test sections. The test pressure load should
furnish experimental proof of operational
safety. The test pressure is not based on the
working pressure, but rather on the internal
pressure load capacity, derived from the pipe
wall thickness.
Supplement 2 of DVS 2210-1 forms the basis
for the following information. This replaces the
data in DVS 2210-1 entirely. The modifications
became necessary because the reference value ”nominal pressure (PN)” is being used less
and less to determine the test pressure (1.5 x
PN, or 1.3 x PN) and is being replaced by SDR,
• a short-term overload or even a reduction in
the service life can occur if in the course of the
internal pressure test based on the nominal
pressure the pipe wall temperature TR = 20 °C
is exceeded by more than 5°C.
• Test pressures are therefore determined in
relation to SDR and the pipe wall temperature.
The 100-h value from the long-term behaviour
diagram is used for the test clamping.
Test Parameters
The following table indicates recommended
methods of testing the internal pressure.

xxvi

Pre-test
The pre-test serves to prepare the piping
system for the actual test (main test). In the
course of pre-testing, a tension-expansion
equilibrium in relation to an increase in
volume will develop in the piping system.
A material related drop in pressure will occur
which will require repeated pumping to restore
the test pressure and also frequently a
re-tightening of the flange connection screws.
The guidelines for an expansion-related
pressure decrease in pipes are:

Main test
In the context of the main test, a much smaller
drop in pressure can be expected at constant
pipe wall temperatures so that it is not necessary to pump again. The checks can focus primarily on leak detection at the flange joints and
any position changes of the pipe.
Observe if using compensators
If the pipeline to be tested contains compensators, this has an influence on the expected axial
forces of the pipeline. Because the test pressure is higher than the working pressure, the axial
forces on the fixed points become higher. This
has to be taken into account when designing
the fixed points.

Adequate time should be allowed between
filling and testing the pipeline, so that the air
contained in the piping system can escape via
the vents: ca. 6 - 12 h, depending on the
nominal diameter

Observe if using valves
When using a valve at the end of a pipeline (end
or final valve), the valve and the pipe end should
be closed by a dummy flange or cap. This prevents inadvertent opening of the valve or any
pollution of the inside of the valve.
Filling the pipeline
Before starting with the internal pressure test,
the following points must be checked:
Was installation done according to the available
plans?
• All pressure relief devices and flap traps
mounted in the flow direction?
• All end valves shut?
• Valves in front of other devices are shut to
protect against pressure.
• Visual inspection of all joints, pumps,
measurement devices and tanks.
• Has the waiting period after the last fusion /
cementing been observed?
Now the pipeline can be filled from the geodetic
lowest point. Special attention should be given
to the air vent. If possible, vents should be provided at all the high points of the pipeline and
these should be open when filling the system.
Flushing velocity should be at least 1 m/sec.

The test pressure is applied according to the
diagram.
Here it is important that the pressure increase
rate does not cause any water hammer!
Definitions
Y = test pressure in %
X = time for pressure increase in min
1) = pressure increase rate up to DN 100
2) = range of pressure increase rates >DN 100
- 400
3) = reference values for pressure increase
rate DN 500 and greater is: 500 / DN 		
[bar/10 min]
Determining the test pressure
The allowable test pressure is calculated according to the following formula:

Reference values for the filling volume are
given in the following table.

xxvii

514-519

General
To make things easier, the permissible test
pressures can be taken directly from the
following diagrams.
Definitions:
P = permissible test pressure in bar
T = pipe wall temperature in °C

Checks during testing
The following measurement values must be
recorded consistently during testing:

xxviii

General
• Internal pressure at the absolute low
point of the pipeline
• Medium and ambient temperature
• Water volume input
• Water volume output
• Pressure drop rates

ABS Pressure Pipe Systems
Standards
George Fischer metric fittings in ABS are
generally in accordance with DIN 8063 and
the pipe with DIN 16890/16891. George
Fischer’s inch range of fittings is generally
in accordance with BS 5392 and the pipe
with BS 5391.

Sizes (Metric vs Inch)
For those unfamiliar with the difference
between metric and inch sizes the
fol­lowing note may be helpful. In imperial
systems, the sizes of pipe, fittings and
other components such as valves are identified by reference to the nominal size of the
bore of the pipe expressed in inches and
fractions of an inch.
In metric systems, however, sizes are identified by references to the outside diameter
of the pipe expressed in millimetres.

The table below shows the metric sizes
which are regarded for practical pur­poses
as being generally equivalent to imperial
sizes up to 8 inches. It should, however, be
understood that metric s­ izes are not simply
inch sizes which have been converted into
millimetres and called metric; their actual
dimen­sions are slightly different and they
are, with the exception of 21/2" (75 mm) and
5" (140 mm) not interchangeable.

IMPERIAL SIZES
Nominal Bore
inches
/4
/8
1
/2
3
/4
1
11/4
11/2
2
21/2
3
4
5
6
8
10
1
3

12

METRIC SIZES
Pipe outside
Nominal bore
diameter (mm)
(mm)
12
16
20
25
32
40
50
63
75
90
110
140
160
225
250
280
315

8
10
15
20
25
32
40
50
65
80
100
125
150
200
250
250
300

xxix

ABS BS Inch Product Range
(for further details please contact your local George Fischer Supplier)
Pipe
Class E
Class D
Class C
Class T

(15 bar, 217 lb/in2 at 20°C)
(12 bar, 173 lb/in2 at 20°C)
( 9 bar, 130 lb/in2 at 20°C)
(12 bar, 173 lb/in2 at 20°C)

3/8"–4"
6"
1"–8"
1/2"–2"

Fittings

xxx

Long Bends

Class E

1/2"–4"

Short Pattern Bend

Class C

8"

Elbows 90°

Class E
Class C

3/8"–4"
6"

Tee 90°

Class E
Class D
Class C

3/8"–4"
6"
8"

Tee 90° Reduced

Class E

3/4"–1/2"–4"–3"

Tee 45°

Class E

1/2"–5"

Elbow 45°

Class E
Class D
Class C

3/8"–4"
6"
8"

Socket

Class E
Class D
Class C

3/8"–4"
6"
8"

Cap

Class E

3/8"–4"

Flange Adaptors
(Serrated, O-ring groove, flat)

Class E

1/2"–4"

Class D
Class C

6"
8"

Full Faced Flanges
(BS 10, BS 4504/ISO, ASA, undrilled)

Class E

1/2"–4"

Class D

6"

Union
(EPDM and FPM)

Class E

3/8"–2"

Short Reducing Bushes

Class E
Class D

3/8"–4"
6"–8"

Long Reducing Bushes

Class E
Class D

3"–4"
6"

Adaptor Sockets		
(Female Thread x Socket)

3/8"–2"

Adaptor		
(Nipple x Female Thread)

1/2"–2"

Adaptor Bush		
(Socket x Male Thread)

3/8"–2"

Adaptor Unions		
(Brass, PVC, Malleable Iron)

3/8"–2"

Accessories 		
(Loose Flanges, Sets, Pipe Brackets etc.)

various

Hand-operated and actuated valves
Ball Valve, Type 546, Class E
(EPDM and FPM, Thread Socket Versions)

3/8"–4"

Diaphragm Valve, Type 514/515/317/517, Class D
(EPDM and PTFE)

1/2"–4"

Butterfly Valves, Type 567/568 Class D
(EPDM and FPM)

2"–8"

Ball Check Valve, Type 360, Class D

3/8"–2"

Angle Seat Check Valve Type 303, Class D

1/2"–2"

Electrically Actuated Ball Valves, Type 130 and Type 107

3/8"–4"

Pneumatically Actuated Ball Valves, Type 230

3/8"–4"

Pneumatically Actuated Diaphragm Valves, Type Diastar 16,10 		
1/2"–6"
and 6 and Type 018		
Electronically Actuated Butterfly Valves, Type 140, 141

1/2"–6"

Electronically Actuated Butterfly Valves, Type 140, 141

2"–8"

Pneumatically Actuated Butterfly Valves, Type 240, 241

2"–8"

xxxi

ABS Metric Product Range
(for further details please contact your local George Fischer Supplier)
Pipe
PN10
PN6

(10 bar at 20°C water)
(6 bar at 20°C water)

d16 - d225
d250 - d315

Long Bends

(10 bar at 20°C water)

d16 - d225

Short Pattern Bend

(10 bar at 20°C water)
(6 bar at 20°C water)

d16 - d225		
d250 - d315

Elbows 90°

(10 bar at 20°C water)
(6 bar at 20°C water)

d20 - d225		
d250

Tee 90°

(10 bar at 20°C water)
(6 bar at 20°C water)

d20 - d225		
d250

Tee 90° Reduced

(10 bar at 20°C water)

d20 - d225

Tee 45°

(10 bar at 20°C water)
(6 bar at 20°C water)

d20 - d225		
d75 - d140

Elbow 45°

(10 bar at 20°C water)
(6 bar at 20°C water)

d20 - d225		
d250 - d315

Cap

(10 bar at 20°C water)

d16 d160

Flange Adaptors
(Serrated/flat)

(10 bar at 20°C water)
(6 bar at 20°C water)

d20 - d225
d250 - d315

Union
(EPDM and FPM)

(10 bar at 20°C water)

d16 - d110

Short Reducing Bushes

(10 bar at 20°C water)
(6 bar at 20°C water)

d16 - d225
d250 - d315

Long Reducing Bushes

(10 bar at 20°C water)

d32 - d90

Adaptor Sockets
(Female Thread x Socket)

(10 bar at 20°C water)

d20 - d63

Adaptor Sockets
(Nipple x Female Thread)

(10 bar at 20°C water)

d16 - d63

Adaptor Bush
(Socket x Male Thread)

(10 bar at 20°C water)

d16 - d63

Adaptor Unions
(Brass, PVC-U, Malleable Iron)

(10 bar at 20°C water)

d16 - d110		

Fittings

Accessories 		
(Loose Flanges, Sets, Pipe Brackets etc.)

xxxii

various

Hand-operated and actuated valves
Ball Valve, Type 546
(EPDM and FPM)

(10 bar at 20°C water)

d16 - d110

3 way Ball Valve, Type 543
(EPDM and FPM)

(10 bar at 20°C water)

d16 - d63		

Diaphragm Valve, Type 515/514/317/517
(EPDM and PTFE)

(10 bar at 20°C water)

d16 - d63

Butterfly Valve, Type 567/568/037/038
(EPDM and PTFE)

(10 bar at 20°C water)

d63 - d315

Butterfly Valve, Type 037, 038

(10 bar at 20°C water)

d63 - d315

Ball Check Valve, Type 360
(EPDM and PTFE)

(10 bar at 20°C water)

d16 - d63

Angle Seat Check Valve Type 303

(10 bar at 20°C water)

d20 - d63

Electrically Actuated Ball Valves, 				
Type 130 and Type 107
(10 bar at 20°C water)
d16 - d110
Pneumatically Actuated Diaphragm 				
Valves
(10 bar at 20°C water)
d16 - d110		
(EPDM and FPM)
(6 bar at 20°C water)
Electrically Actuated Butterfly Valves 				
Type 140, 141
(10 bar at 20°C water)
d63 - d225
Pneumatically Actuated Butterfly Valves 				
Type 240,241
(10 bar at 20°C water)
d63 - d225

xxxiii

Abbreviations

xxxiv

Contents
Page

ABS BS Inch

3

ABS metric

23

Accessories

139

Index

157

1

2

ABS BS Inch
Page
Pipes

4

Solvent Cement Fittings

6

Adaptor Fittings ABS

12

Flange adaptors

16

Full Face Flange (drilled)

17

Unions

19

Adaptor Unions ABS

20

3

Pipes
Pipe ABS grey class E 15 bar at 20°C
• Dimensions: BS 5391
• Pipe length: 6m with plain ends
• Minimum order quantity: 1 length
d

[inch]

PN

Code

kg/m

e

[mm]

di

[mm]

15
1∕2
15
3∕4
15
1 15
1 1∕4 15

169 018 080
169 018 081
169 018 082
169 018 083
169 018 084

0.090
0.001
0.210
0.330
0.001

1,7
2,0
2,5
3,1
3,9

6
8
14
19
24

1 1∕2
2
3
4

169 018 085
169 018 086
169 018 088
169 018 089

0.680 4,5
1.060 5,6
2.280 8,3
0.300 10,6

29
39
59
80

3∕8

15
15
15
15

Pipe ABS grey class C 9 bar at 20°C
• Dimensions: BS 5391
• Pipe length: 6m with plain ends
• Minimum order quantity: 1 length
d

[inch]

PN

Code

6 12 169 018 067

kg/m

e

[mm]

di

[mm]

6.330 12.8 125.8

Pipe ABS grey class C 9 bar at 20°C
• Dimensions: BS 5391
• Pipe length: 6m with plain ends
• Minimum order quantity: 1 length
d

[inch]

1

1 1∕4
1 1∕2
2
3

PN

9
9
9
9
9

Code

169 018 033
169 018 034
169 018 035
169 018 036
169 018 038

2 1∕2 10 169 017 087
4 9 169 018 039
5 10 169 017 091
6 9 169 018 042
8 9 169 018 045

4

kg/m

0.500
0.340
0.001
0.001
1.130

e

[mm]

2.0
2.5
2.8
3.6
5.2

di

[mm]

21.0
27.0
33.0
44.0
66.0

1.154 4.5 66.0
2.480 6.7 88.0
4.083 8.6 122.8
0.300 9.9 120.0
9.530 12.7 127.0

Pipe ABS grey class 7 (T) 12 bar at 20°C
Dimensions: BS 5391
Pipe length: 6m with plain ends
Minimum order quantity: 1 length
Thick wall pipe to allow for threading

•
•
•
•
d

[inch]

PN

12
12
1 12
1 1∕4 12
1 1∕2 12
2 12
1∕2
3∕4

Code

169 018 106
169 018 107
169 018 108
169 018 109
169 018 110
169 018 111

kg/m

0.220
0.001
0.001
0.680
0.870
1.310

e

di

[mm] [mm]

3.6
3.6
4.3
5.3
6.0
7.2

5
11
16
21
26
36

5

Solvent Cement Fittings
29 00 11

Bend 90° ABS Inch BS
d

[inch]

PN

z

D

[mm]

0.021 40
0.035 50
0.049 64
0.155 80
0.262 100

2
2 1∕2
3
4

729 001 111
729 000 112
729 001 113
729 001 115

0.388
0.585
1.532
2.720

15
10
15
15

L

[mm]

729 001 106
729 001 107
729 001 108
729 001 109
729 001 110

[mm]

29 58
35 71
43 88
54 109
64 131

126 76 163
150 90 194
180 113 231
220 137 284

Bend 90°, short pattern, ABS BS Inch
d

[mm]

8

29 00 16

kg

15
3∕4
15
1 15
1 1∕4 15
1 1∕2 15
1∕2

29 01 11

Code

PN Code

9 729 011 120

kg

z

[mm]

D

[mm]

L

[mm]

6.800 168 256 287

Long Radius Bend 90°, ABS BS Inch
Other angles and sizes are available on request
d

[inch]

PN

kg

R

[mm]

L

[mm]

15
3∕4
15
1 15
1 1∕4 15
1 1∕2 15

729 001 656
729 001 657
729 001 658
729 001 659
729 001 660

0.017 51 71
0.032 76 108
0.051 102 133
0.103 127 170
0.152 152 201

2
2 1∕2
3
4

729 001 661
729 001 662
729 001 663
729 001 664

0.328
1.444
1.125
2.202

1∕2

6

Code

15
15
15
15

203
255
305
406

272
340
402
544

29 15 11

Long Radius Bend 45°, ABS BS Inch
Other angles and sizes are available on request
d

[inch]

PN

R

[mm]

L

[mm]

729 151 176
729 151 177
729 151 178
729 151 179
729 151 180

0.016 51 50
0.023 76 63
0.038 102 75
0.077 127 100
0.113 152 112

2
2 1∕2
3
4

729 151 181
729 151 182
729 151 183
729 151 184

0.231
1.444
0.844
1.694

15
15
15
15

203
255
305
406

150
200
238
301

Elbow 45° ABS Inch BS
d

[inch]

PN

Code

kg

z

D

[mm] [mm]

L

[mm]

15
1∕2
15
3∕4
15
1 15
1 1∕4 15

729 151 105
729 151 106
729 151 107
729 151 108
729 151 109

0.006
0.011
0.019
0.026
0.046

4
7
8
10
11

23
28
33
41
51

20
24
29
33
40

1 1∕2
2
2 1∕2
3
4

729 151 110
729 151 111
729 150 112
729 151 113
729 151 115

0.068
0.199
0.228
0.405
0.866

11 57
15 72
17 89
21 109
26 135

41
51
61
72
89

5 10 729 150 116
6 15 729 151 117
8 9 729 151 120

1.190
1.865
3.900

32 162 108
38 198 129
49 250 168

3∕8

29 10 11

kg

15
3∕4
15
1 15
1 1∕4 15
1 1∕2 15
1∕2

29 15 11

Code

15
15
10
15
15

Elbow 90° ABS Inch BS
d

[inch]

PN

Code

kg

z

D

[mm] [mm]

15
1∕2
15
3∕4
15
1 15
1 1∕4 15

729 101 105
729 101 106
729 101 107
729 101 108
729 101 109

0.012
0.016
0.026
0.038
0.058

10
13
16
19
22

1 1∕2
2
2 1∕2
3
4
5
6

729 101 110
729 101 111
729 100 112
729 101 113
729 101 115
729 100 116
729 101 117

0.083
0.162
0.308
0.480
0.980
1.470
2.960

26
32
40
46
59
70
86

3∕8

15
15
10
15
15
10
15

24
28
34
40
52

L

[mm]

25
30
37
42
51

58 56
73 68
90 84
107 97
137 122
162 146
201 176

7

29 20 11

Tee 90° ABS Inch BS
d

[inch]

PN

Code

kg

D

L

[mm]

[mm]

729 201 105
729 201 106
729 201 107
729 201 108
729 201 109

0.018
0.029
0.040
0.055
0.076

10
13
16
19
22

1 1∕2
2
2 1∕2
3
4

729 201 110
729 201 111
729 200 112
729 201 113
729 201 115

0.146
0.296
0.421
0.700
1.181

26 58 56
32 73 68
40 90 84
46 107 97
59 138 122

15
15
10
15
15

5 10 729 200 116
6 15 729 201 117
8 9 729 201 120

25
30
35
43
53

25
30
37
43
51

2.500 71 169 147
4.470 86 202 176
7.680 114 256 233

Tee 90° reducing ABS Inch BS
d

d1

[inch] [inch]
3∕4

1
1

1 1∕4
1 1∕4

PN

15
1∕2
15
3∕4
15
3∕4
15
1 15
1∕2

1∕2
1 1∕2
1 1∕2
1
3∕4
2
2
1
2 1 1∕2
4
3

8

[mm]

15
1∕2
15
3∕4
15
1 15
1 1∕4 15
3∕8

29 20 11

z

15
15
15
15
15
15

Code

kg

z

z1

D

[mm] [mm] [mm]

33
41
41
53
53

L

[mm]

33
39
39
51
51

L1

[mm]

729 201 134
729 201 141
729 201 138
729 201 151
729 201 147

0.026
0.042
0.043
0.081
0.085

14
17
17
30
27

14
17
17
22
22

30
33
36
51
51

729 201 009
729 201 164
729 201 011
729 201 178
729 201 170
729 201 137

0.154
0.158
0.246
0.250
0.265
0.001

29
29
37
37
38
72

29 62 59 44
25 62 59 50
31 77 73 53
31 77 73 56
31 73 68 68
59 138 122 122

29 25 11

Tee 45° ABS Inch BS
d

[inch]

1
1 1∕4
1 1∕2

9
9
9
9
9

2
2 1∕2
5

9 729 251 111
6 729 250 112
6 729 250 116

1∕2
3∕4

29 90 19

PN Code

729 251 106
729 251 107
729 251 108
729 251 109
729 251 110

kg

z

z1

[mm]

0.026
0.039
0.068
0.109
0.207

D

[mm] [mm]

30
36
45
55
67

6
9
10
9
13

0.372 87
0.637 101
4.315 190

L

[mm]

28 68
33 83
41 99
50 118
60 140

L1

[mm]

46
55
67
82
97

16 74 175 123
18 91 207 145
34 168 376 266

Barrel nipple ABS Inch BS
Model:
With solvent cement spigots on both sides
For quick connections between fittings
For the shortest possible distance between fittings
Overall length L = 2 x socket length

•
•
•
•
d

[inch]

PN

kg

L

[mm]

10
1∕2
10
3∕4
10
1 10
1 1∕4 10

729 901 905
729 901 906
729 901 907
729 901 908
729 901 909

0.002
0.004
0.008
0.015
0.027

1 1∕2
2
2 1∕2
3
4
5

729 901 910
729 901 911
729 900 912
729 901 913
729 901 914
729 900 916

0.050 62
0.098 76
0.102 88
0.266 102
0.476 122
152

3∕8

29 91 11

Code

10
10
10
10
10
10

28
32
38
44
52

Socket ABS Inch BS
d

[inch]

PN

Code

kg

z

D

[mm] [mm]

[mm]

15
1∕2
15
3∕4
15
1 15
1 1∕4 15

729 911 105
729 911 106
729 911 107
729 911 108
729 911 109

0.006
0.008
0.013
0.020
0.040

3
3
3
3
3

1 1∕2
2
2 1∕2
3
4

729 911 110
729 911 111
729 910 112
729 911 113
729 911 115

0.048
0.090
0.140
0.260
0.476

3 58 64
5 72 78
4 87 92
7 104 108
8 134 135

3∕8

15
15
10
15
15

table continued next page

23
27
33
41
51

L

35
38
45
51
60

9

d

[inch]

PN

Code

kg

5 10 729 910 116
6 15 729 911 117
8 15 729 911 120

29 96 11

[inch]

PN

0.760
1.310
3.700

L

[mm]

7 162 159
11 197 192
10 253 248

Code

kg

D

[mm]

l

[mm]

15
1∕2
15
3∕4
15
1 15
1 1∕4 15

729 961 105
729 961 106
729 961 107
729 961 108
729 961 109

0.004
0.007
0.011
0.019
0.033

1 1∕2
2
2 1∕2
3
4
5

729 961 110
729 961 111
729 960 112
729 961 113
729 961 115
729 960 116

0.038 62 44
0.097 78 54
0.115 87 65
0.222 112 77
0.570 145 101
0.880 163 114

3∕8

15
15
15
15
15
15

26
30
37
44
55

33
25
30
34
41

Reducing bush short pattern ABS Inch BS
d-d

PN

[inch]

Code

kg

z

l

[mm] [mm]

- 3∕8
- 1∕2
1 - 1∕2
1 - 3∕4
1 1∕4 - 1∕2

15
15
15
15
15

729 901 334
729 901 337
729 901 342
729 901 341
729 901 348

0.002
0.004
0.015
0.008
0.019

2
3
6
3
11

18
21
24
24
29

1 1∕4 - 3∕4
1 1∕4 - 1
1 1∕2 - 1∕2
1 1∕2 - 3∕4
1 1∕2 - 1

15
15
15
15
15

729 901 347
729 901 346
729 901 355
729 901 354
729 901 353

0.019
0.015
0.026
0.027
0.013

8
5
13
10
6

29
29
30
30
30

1 1∕2 - 1 1∕4
2 - 3∕4
2-1
2 - 1 1∕4
2 - 1 1∕2

15
15
15
15
15

729 901 352
729 901 361
729 901 360
729 901 359
729 901 358

0.010
0.046
0.060
0.053
0.038

2
16
13
8
6

30
37
37
37
37

2 1∕2 - 2
3-1
3 - 1 1∕2
3-2
3 - 2 1∕2

15
15
15
15
15

729 901 364
729 901 374
729 901 372
729 901 371
729 901 370

0.710
0.064
0.133
0.131
0.095

8
27
21
14
6

44
51
51
51
51

4 - 3 15 729 901 381
5 - 4 15 729 901 385
8 - 6 15 729 901 396

0.259
0.511
1.230

13 64
13 76
33 119

1∕2
3∕4

10

D

[mm] [mm]

Cap, ABS BS Inch
d

29 90 13

z

29 91 13

Reducing bush long pattern ABS Inch BS
d-d

[inch]

PN

Code

6 - 4 15 729 911 389

kg

z

[mm]

l

[mm]

0.975 133 197

11

Adaptor Fittings ABS
29 10 12

Elbow 90°, ABS BS Inch Rp
Model:
With solvent cement socket BS Inch and parallel female thread Rp
Reinforcing ring stainless (A2)
Connection to plastic or metal threads
Do not use thread sealing pastes that are harmful to ABS

•
•
•
•
d

Rp

[inch] [inch]

Code

kg

15 729 101 206
15 729 101 207
1 15 729 101 208

1∕2

1∕2

3∕4

3∕4

1

29 91 10

PN

z1

z2

D

L

[mm] [mm] [mm] [mm]

0.013
0.028
0.036

12
15
18

11
15
19

30
35
45

27
33
39

Socket ABS Inch BS Rp
Model:
With solvent cement socket BS Inch and parallel female thread Rp
Reinforcing ring stainless (A2)
Connection to plastic or metal threads
Do not use thread sealing pastes that are harmful to ABS

•
•
•
•
d

Rp

[inch] [inch]

PN

15
15
3∕4
3∕4
15
1
1 15
1 1∕4 1 1∕4 15
1 1∕2 1 1∕2 15
2
2 15

29 90 14

3∕8

3∕8

1∕2

1∕2

Code

729 911 005
729 911 006
729 911 007
729 911 008
729 911 009
729 911 010
729 911 011

kg

z

s

l

[mm] [mm] [mm]

0.010
0.015
0.020
0.044
0.055
0.106
0.138

4
4
3
3
3
8
8

27
32
36
36
55
65
8

31
35
40
45
51
69
69

Adaptor ABS Inch BS Rp
Model:
• With solvent cement socket BS Inch and parallel female thread Rp
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to ABS
d

Rp

[inch] [inch]

PN

15
15
1
1 15
1 1∕4 1 1∕4 15
1 1∕2 1 1∕2 15
2
2 15

12

1∕2

1∕2

3∕4

3∕4

Code

729 901 406
729 901 407
729 901 408
729 901 409
729 901 410
729 901 411

kg

0.010
0.025
0.037
0.059
0.073
0.153

z

s

l

[mm] [mm] [mm]

21
23
27
33
38
47

28
34
42
52
62
77

37
41
48
56
61
74

29 91 17

Adaptor Bush ABS BS Inch R
Model:
• With solvent cement socket BS Inch and taper male thread R
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to ABS
d

R

[inch] [inch]

PN

Code

15
15
3∕4
3∕4
15
1
1 15
1 1∕4 1 1∕4 15
1 1∕2 1 1∕2 15
2
2 15

29 91 31

3∕8

3∕8

1∕2

1∕2

kg

729 911 705
729 911 706
729 911 707
729 911 708
729 911 709
729 911 710
729 911 711

z

s

l

[mm] [mm] [mm]

0.010
0.015
0.019
0.031
0.048
0.073
0.133

20
24
25
28
31
32
38

27
32
36
46
55
65
80

34
40
44
50
57
63
76

Adaptor socket ABS metric/Inch BS
Model:
• with BS Inch and metric solvent cement sockets
d

[mm]

d

[inch]

PN

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

29 91 15

10
10
10
10
10

Code

kg

z

L

[mm] [mm]

D

[mm]

729 913 105
729 913 106
729 913 107
729 913 108
729 913 109

0.007
0.010
0.016
0.025
0.045

5
5
5
5
5

35
38
45
51
60

23
27
33
41
51

50 1 1∕2 10 729 913 110
63
2 10 729 913 111
75 2 1∕2 10 729 910 112
90
3 10 729 913 113
110
4 10 729 913 115

0.070
0.130
0.140
0.365
0.630

4 65 59
5 79 75
4 92 87
6 108 104
7 135 134

Adaptor Socket Nipple, ABS BS Inch R
Model:
• With solvent cement spigot/reducing socket and taper male thread R
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to ABS
d

d1

R

[inch] [inch] [inch]

15
15
3∕4
15
1 15

1∕4

3∕8

3∕8

3∕8

1∕2

1∕2

1∕2

3∕4

3∕4

1

PN

Code

729 911 555
729 911 556
729 911 557
729 911 558

kg

0.008
0.012
0.018
0.031

z

z1

s

[mm] [mm] [mm]

36
43
48
55

21
28
31
35

27
32
36
46

13

29 90 15

Reducing Bush (short), ABS BS Inch - Rp
Model:
• With solvent cement spigot BS and parallel female thread Rp
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to ABS
d

Rp

PN

[inch] [inch]
1∕2

3∕8

3∕4

1∕2

1
1

29 91 39

3∕4
1∕2

15
15
15
15

Code

kg

729 901 534
729 901 537
729 901 541
729 901 542

z

D

L

[mm] [mm] [mm]

0.003
0.011
0.011
0.015

3
5
4
8

21
27
33
33

18
21
24
24

Adaptor nipple ABS Inch BS R
Model:
• With solvent cement spigot BS Inch and taper male thread R
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to ABS
d

R

PN

[inch] [inch]

15
1∕2
1∕2
15
3∕4
3∕4
15
1
1 15
1 1∕4 1 1∕4 15
3∕8

3∕8

Code

kg

729 913 905
729 913 906
729 913 907
729 913 908
729 913 909

1 1∕2 1 1∕2 15 729 913 910
2
2 15 729 913 911
3
3 15 729 913 913
4
4 15 729 913 915

29 28 00

l

[mm]

0.007
0.010
0.016
0.025
0.045

43
50
56
63
75

0.070 88
0.130 88
0.365 128
0.630 153

Backnut ABS Inch BS
Model:
• Parallel female thread Rp
Rp

[inch]

PN

15
15
1 15
1 1∕4 15
1 1∕2 15
2 15
1∕2
3∕4

14

Code

169 280 002
169 280 003
169 280 004
169 280 005
169 280 006
169 280 007

kg

0.010
0.021
0.024
0.025
0.034
0.065

D

s

[mm] [mm]

37
42
55
59
70
94

31
36
46
50
60
79

29 96 19

Plug ABS R
Model:
• With taper male thread R
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to ABS
R

[inch]

PN

Code

10 729 961 906
10 729 961 907
1 10 729 961 908

1∕2
3∕4

kg

0.008
0.014
0.022

s

L

[mm] [mm]

27
36
41

25
29
32

15

Flange adaptors
29 79 11

Flange adaptor ABS
Combined jointing face flat and serrated Inch BS
Model:
• Gasket: Flange Gasket EPDM No. 48 40 01, FPM No. 49 40 01
d

[inch]

PN

kg

D1

[mm]

[mm]

[mm]

L1

z

[mm] [mm]

0.007
0.011
0.018
0.027
0.050

21
24
27
32
33

6
7
7
8
8

3
3
3
3
3

2
2 1∕2
3
4
5
6
8

729 791 111
729 790 112
729 791 113
729 791 115
729 790 116
729 791 117
729 791 120

0.078 40 77 40
0.118 106 91 47
0.187 56 108 56
0.309 69 136 69
0.567 188 165 81
0.912 96 198 96
1.449 122 248 122

9
10
11
12
14
16
20

3
3
5
5
5
5
6

15
10
15
15
10
12
9

27
33
41
50
61

L

729 791 106
729 791 107
729 791 108
729 791 109
729 791 110

3∕4

34
41
27
32
33

D

15
15
1 15
1 1∕4 15
1 1∕2 15
1∕2

16

Code

Full Face Flange (drilled)
29 73 11

Full face flange ABS Inch BS
Drilled to BS 10 table D & E
Model:
• Jointing face serrated
• Solvent cement socket BS inch
• It is recommended to use backing flanges in conjunction with all Full Face
Flanges
• For pressure ratings over 2 bar backing flanges must be used
• All Full Face Flanges are manufactured with outside diameter to BS 4504
• ¹ connecting dimensions: BS 10 table E
• * connecting dimensions: BS 10 table D
AL: number of holes
d

DN

[inch] [mm]

15
20
25
32
40

kg

D

[mm]

D1

[mm]

D2

[mm]

D3

H

H1

[mm] [mm] [mm]

AL z

[mm]

729 731 106
729 731 107
729 731 108
729 731 109
729 731 110

0.075
0.083
0.097
0.149
0.180

95
105
115
140
150

67
73
83
88
98

27
33
41
50
61

15
15
15
15
15

10
10
10
10
10

21
24
27
32
33

4
4
4
4
4

3
8
3
3
3

2 50 729 731 111
3 80 729 731 113
¹ 4 100 729 731 114
* 4 100 729 731 164
6 150 729 731 117

0.231
0.238
0.771
0.001
1.486

165
200
220
220
285

115
146
178
178
235

77
108
136
136
198

18
18
18
18
22

10
12
17
17
22

40
56
69
69
96

4
4
8
4
8

3
5
5
5
5

1∕2
3∕4

1
1 1∕4
1 1∕2

29 73 01
29 73 11

Code

Full face flange ABS Inch BS
Drilled to BS 4504 PN10/16
Model:
• Jointing face serrated
• Solvent cement socket BS inch
• It is recommended to use backing flanges in conjunction with all Full Face
Flanges
• For pressure ratings over 2 bar backing flanges must be used
• All Full Face Flanges are manufactured with outside diameter to BS 4504
• ¹ connecting dimensions: BS 4504 and BS 10 table E
AL: number of holes
d

DN

[inch] [mm]

kg

D

[mm]

D1

[mm]

729 731 106
729 731 107
729 731 108
729 730 109
729 730 110

0.075
0.083
0.097
0.150
0.190

95 67
105 73
115 83
140 100
150 110

2 50 729 730 111
3 80 729 730 113
¹ 4 100 729 731 114
6 150 729 730 117

0.240
0.001
0.771
0.001

165
200
220
285

1∕2
3∕4

1
1 1∕4
1 1∕2

15
20
25
32
40

Code

D2

[mm]

D3

H

H1

[mm] [mm] [mm]

AL z

[mm]

27
33
41
50
61

15
15
15
14
14

10
10
10
10
10

21
24
27
32
33

4
4
4
4
4

3
8
3
3
3

125 77
160 108
178 136
240 198

18
18
18
22

10
12
17
22

40
56
69
96

4
4
8
8

3
5
5
5

17

29 73 11
29 73 21

Full face flange ABS Inch BS
Drilled to ANSI B 16.5 class 150
Model:
• Jointing face serrated
• Solvent cement socket BS inch
• It is recommended to use backing flanges in conjunction with all Full Face
Flanges
• For pressure ratings over 2 bar backing flanges must be used
• All Full Face Flanges are manufactured with outside diameter to BS 4504
AL: number of holes
d

DN

[inch] [mm]

15
20
25
32
40

kg

D

[mm]

729 732 106
729 732 107
729 732 108
729 731 109
729 731 110

0.070
0.090
0.097
0.149
0.180

95
105
115
140
150

2 50 729 731 111
3 80 729 732 113
4 100 729 732 114
6 150 729 730 117

0.231
0.238
0.690
0.001

165
200
220
285

1∕2
3∕4

1
1 1∕4
1 1∕2

29 73 00

Code

D1

[mm]

D2

D3

[mm]

60
70
79
88
98

H

H1

[mm] [mm] [mm]

AL z

[mm]

27
33
41
50
61

16
16
16
15
15

10
10
10
10
10

21
24
27
32
33

4
4
4
4
4

3
8
3
3
3

115 77
152 108
190 136
240 198

18
19
19
22

10
12
17
22

40
56
69
96

4
4
8
8

3
5
5
5

Full face flange ABS Inch BS
Undrilled
Model:
• Jointing face serrated
• Solvent cement socket BS inch
• It is recommended to use backing flanges in conjunction with all Full Face
Flanges
• For pressure ratings over 2 bar backing flanges must be used
• All Full Face Flanges are manufactured with outside diameter to BS 4504
d

DN

[inch] [mm]

D

[mm]

b

[mm]

h

l

z

[mm] [mm] [mm]

0.074
0.090
0.105
0.155
0.187

95
105
115
140
150

27
33
41
50
61

10
10
10
10
10

21
24
27
32
33

3
8
3
3
3

2 50 729 730 011
3 80 729 730 013
4 100 729 730 014
6 150 729 730 017

0.238
0.426
0.656
1.832

165 77
200 108
220 136
285 198

10
12
17
22

40
56
69
96

3
5
5
5

3∕4

1
1 1∕4
1 1∕2

18

kg

729 730 006
729 730 007
729 730 008
729 730 009
729 730 010

1∕2

15
20
25
32
40

Code

Unions
29 51 11

Union ABS Inch BS
Model:
• Union End: Solvent cement socket BS Inch
• Union Bush: Solvent cement socket BS inch
• Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00
d

[inch]

PN

15
15
3∕4
15
1 15
1 1∕4 15

kg

z1

z2

D

L1

[mm] [mm] [mm]

L2

[mm] [mm]

729 511 105
729 511 106
729 511 107
729 511 108
729 511 109

0.019
0.035
0.049
0.070
0.127

3
3
3
3
3

8
9
9
9
10

35
43
53
60
74

19
21
24
27
32

24
26
29
33
39

1 1∕2 15 729 511 110
2 15 729 511 111
2 1∕2 10 729 510 112

0.220
0.402
0.461

3
3
3

10 83
10 103
18 135

33
40
47

41
48
62

3∕8
1∕2

29 60 11

Code

Union end ABS Inch BS
Model:
• Solvent cement socket BS inch
d

[inch]

PN

15
15
3∕4
15
1 15
1 1∕4 15
1 1∕2 15
2 15
3∕8
1∕2

29 64 11

Code

729 601 105
729 601 106
729 601 107
729 601 108
729 601 109
729 601 110
729 601 111

kg

z

D

D1

L

[mm] [mm] [mm] [mm]

0.004
0.007
0.011
0.015
0.022
0.033
0.060

3
3
3
3
3
3
3

24
30
38
44
56
62
78

22
27
36
41
53
59
74

19
21
24
27
32
33
40

Union bush ABS Inch BS
Model:
• Solvent cement socket BS inch
d

[inch]

PN

15
1∕2
15
3∕4
15
1 15
1 1∕4 15
1 1∕2 15
2 15
3∕8

Code

729 641 105
729 641 106
729 641 107
729 641 108
729 641 109
729 641 110
729 641 111

kg

0.008
0.009
0.014
0.024
0.043
0.059
0.106

z

D

[mm] [mm]

8
9
9
9
10
10
10

24
28
34
42
52
62
78

G/Tr

3/4
1
1 1/4
1 1/2
2
2 1/4
2 3/4

L

[mm]

24
26
29
33
39
46
58

19

Adaptor Unions ABS
29 51 12

Adaptor Union ABS/PVC-U BS Inch - Rp
Model:
Union Bush: PVC-U parallel female thread Rp
Union End: Solvent cement socket ABS BS inch
Union nut: PVC-U
Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00
Connection to plastic threads only
Do not use thread sealing pastes that are harmful to PVC-U

•
•
•
•
•
•
d

Rp

PN

[inch] [inch]

15
15
3∕4
3∕4
15
1
1 15
1 1∕4 1 1∕4 15
1 1∕2 1 1∕2 15
2
2 15

29 52 11

3∕8

3∕8

1∕2

1∕2

Code

kg

729 511 205
729 511 206
729 511 207
729 511 208
729 511 209
729 511 210
729 511 211

z1

z2

D

[mm] [mm] [mm]

0.025
0.041
0.100
0.172
0.200
0.277
0.430

3
3
3
3
3
3
3

L1

L2

[mm] [mm]

13 35
13 43
14 53
15 60
19 74
26 83
33 103

19
21
24
27
32
33
40

24
26
29
32
38
40
46

Adaptor union ABS/PVC-U Inch BS
Model:
Union End: Solvent cement socket PVC-U BS Inch
Union Bush: Solvent cement socket ABS BS inch
Union Nut: ABS
Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00

•
•
•
•
d

[inch]

PN

15
15
3∕4
15
1 15
1 1∕4 15
1 1∕2 15
2 15
3∕8
1∕2

29 52 31

Code

kg

729 521 105
729 521 106
729 521 107
729 521 108
729 521 109
729 521 110
729 521 111

z1

z2

D

[mm] [mm] [mm]

0.025
0.041
0.066
0.093
0.155
0.209
0.368

3
3
3
3
3
3
3

L1

L2

[mm] [mm]

8 35
9 43
9 53
9 60
10 74
10 83
10 103

19
21
24
27
32
33
40

24
26
29
32
38
40
46

Adaptor union ABS/PVC-U Inch BS/metric
Model:
Union End: Solvent cement socket PVC-U metric
Union Bush: Solvent cement socket ABS BS inch
Union Nut: ABS
Gasket: O-Ring EPDM No. 48 41 00, FPM No. 49 41 00

•
•
•
•
d

d

[inch] [mm]
3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2

20

16
20
25
32
40
50
63

PN

15
15
15
15
15
15
15

Code

729 523 105
729 523 106
729 523 107
729 523 108
729 523 109
729 523 110
729 523 111

kg

0.075
0.120
0.190
0.250
0.400
0.510
0.287

z1

z2

D

[mm] [mm] [mm]

3
3
3
3
3
3
3

13 35
13 43
14 53
15 60
19 74
26 83
33 103

L1

L2

[mm] [mm]

19
21
24
27
32
33
40

24
26
29
32
38
40
46

29 53 13

Adaptor union ABS/malleable iron Inch BS Rp
Model:
Union Nut: ABS
Union Bush: Solvent cement socket BS Inch
Union End: malleable iron with parallel female thread Rp
Gasket: O-Ring EPDM No. 48 41 00

•
•
•
•
d

Rp

[inch] [inch]

PN Code

15
3∕4
3∕4 15
1
1 15
1 1 1∕4 15
1 1∕2 1 1∕2 15
2
2 15
1∕2

29 53 18

1∕2

729 531 306
729 531 307
729 531 308
729 531 309
729 531 310
729 531 311

kg

D

[mm]

0.132 43
0.226 51
0.282 58
0.476 72
0.498 83
0.795 100

L

L1

L2

z1

z2

G

s

[mm] [mm] [mm] [mm] [mm] [inch]

48
51
58
69
78
91

22
22
26
31
33
35

26
29
33
39
46
58

9
7
9
12
14
11

10
10
10
12
14
18

z

G

[mm]

1
1 1/4
1 1/2
2
2 1/4
2 3/4

25
31
38
48
54
67

Adaptor union ABS/malleable iron Inch BS R
Model:
Union Nut: ABS
Union Bush: Solvent cement socket BS Inch
Union End: Malleable iron with taper male thread R
Gasket: O-Ring EPDM No. 48 41 00

•
•
•
•
d

R

PN* Code

[inch] [inch] [bar]

15
3∕4
3∕4
15
1
1 15
1 1∕4 1 1∕4 15
1 1∕2 1 1∕2 15
2
2 15
1∕2

1∕2

729 531 806
729 531 807
729 531 808
729 531 809
729 531 810
729 531 811

kg

D

[mm]

L

[mm]

0.137 43 66
0.226 51 72
0.322 58 80
0.554 72 95
0.654 83 104
0.935 100 118

L1

L2

[mm] [mm] [mm] [inch]

40
43
48
57
59
62

26
29
33
39
46
58

50
53
58
69
73
80

s

[mm]

1
1 1/4
1 1/2
2
2 1/4
2 3/4

25
31
38
48
54
67

Adaptor union R ABS/brass Inch BS
Model:
Union Nut: ABS
Union Bush: Solvent cement socket ABS BS inch
Union End: Brass with taper male thread R
Gasket: O-Ring EPDM No. 48 41 00

•
•
•
•
d

R

[inch] [inch]

PN

15
3∕4
3∕4
15
1
1 15
1 1∕4 1 1∕4 15
1 1∕2 1 1∕2 15
2
2 15
1∕2

1∕2

Code

729 551 906
729 551 907
729 551 908
729 551 909
729 551 910
729 551 911

kg

D

[mm]

L

[mm]

0.123 43 63
0.185 51 71
0.283 58 79
0.503 72 91
0.666 83 97
1.071 100 115

L1

L2

z

G

[mm] [mm] [mm] [inch]

37
42
46
52
56
67

26
29
33
39
41
48

37
42
55
60
65
77

1
1 1/4
1 1/2
2
2 1/4
2 3/4

s

[mm]

25
30
36
46
55
65

21

Adaptor union Rp ABS/Brass Inch BS
Model:
Union Nut: ABS
Union Bush: Solvent cement socket ABS BS inch
Union End: Brass with parallel female thread Rp
Gasket: O-Ring EPDM No. 48 41 00

•
•
•
•
d

Rp

PN

[inch] [inch]

15
15
1
1 15
1 1∕4 1 1∕4 15
1 1∕2 1 1∕2 15
2
2 15

69 25 02

1∕2

1∕2

3∕4

3∕4

Code

kg

729 551 506
729 551 507
729 551 508
729 551 509
729 551 510
729 551 511

D

[mm]

0.084 43
0.134 51
0.179 58
0.327 72
0.452 83
0.722 100

L

L1

L2

z1

z2

G

s

[mm] [mm] [mm] [mm] [mm] [inch] [mm]

48
54
60
70
75
88

22
25
27
31
35
40

26
29
33
39
41
48

7
9
8
10
13
14

9
8
9
11
11
12

1
1 1∕4
1 1∕2
2
2 1∕4
2 3∕4

Tank connector ABS Inch BS
Model:
• End connection: Union with solvent cement socket BS Inch
• Gasket: flat gasket EPDM
d

[inch]

PN

15
1∕2
15
3∕4
15
1 15
1 1∕4 15
1 1∕2 15
2 15
3∕8

22

Code

169 250 225
169 250 226
169 250 227
169 250 228
169 250 229
169 250 230
169 250 231

kg

d1

[mm]

0.073 44
0.131 56
0.194 65
0.001 70
0.446 95
0.485 95
0.001 115

L

[mm]

85
89
97
103
111
119
131

L1

L2

L3

L4

G

[mm] [mm] [mm] [mm] [inch]

65
67
72
75
78
82
87

10
11
12
12
12
13
13

32
30
32
33
32
32
33

14
16
19
22
26
31
38

3/4
1
11/4
11/2
2
21/4
23/4

s

[mm]

33
46
50
60
80
80
83

25
30
36
46
55
65

ABS metric
Page
Metric pipe

25

Pipe fittings for solvent cement jointing

26

Adaptor fittings

33

Threaded fittings

35

Flange adaptor

37

Unions

38

Adaptor Unions

39

Union spare parts

43

Branch saddles

45

Ball valves

49

Spare parts ball valves

74

Diaphragm valves

82

Spare parts diaphragm valves new generation

85

Spare parts diaphragm valves

92

Butterfly valves

94

Spare parts butterfly valves

108

23

Page

24

Angle seat check valves

111

Ball check (non-return) valve

112

Spare parts ball check valves

114

Strainers

117

Spare parts line strainer

119

Variable area flow meters

123

Spare parts variable area flow meters

132

Pipe fittings for solvent cement jointing
29 00 01

Bend 90° ABS metric
• Radius = 2 d
* Available as long as our stock will last
d

d

[mm]

[inch]

20
25
32
40
50
63
75 2 1∕2
90
110
140
* 160

29 01 01

PN

Code

kg

z

[mm]

16
16
10
10
10

729 000 106
729 000 107
729 000 108
729 000 109
729 000 110

0.027 40
0.038 50
0.051 64
0.102 80
0.206 100

10
10
10
10
10
10

729 000 111
729 000 112
729 000 113
729 000 114
729 000 116
729 000 117

0.387
0.585
0.750
2.030
4.100
5.600

126
150
180
220
280
320

D

[mm]

76
90
113
137
168
191

• >d225 - maximum operating temperature: +40°C
[mm]

PN

Code

225 10 729 010 120
280 6 729 010 122
315 6 729 010 123

26

kg

z

[mm]

D

[mm]

[mm]

27 58
35 69
38 86
54 109
61 131

Bend 90° short pattern ABS metric
d

L

L

[mm]

5.650 168 256 287
16.000 210 318 357
21.000 237 356 401

164
194
231
281
356
406

29 10 01

Elbow 90° ABS metric
• >d225 - maximum operating temperature: +40°C
d

[mm]

d

[inch]

16
20
25
32
40

29 15 01

Code

kg

z

[mm]

D

[mm]

L

[mm]

16
16
16
10
10

729 100 105
729 100 106
729 100 107
729 100 108
729 100 109

0.007
0.010
0.017
0.032
0.051

9
11
14
17
21

10
10
10
10
10

729 100 110
729 100 111
729 100 112
729 100 113
729 100 114

0.103
0.196
0.308
0.429
0.786

26 61 57
33 76 72
40 90 84
46 110 97
55 136 116

5 10
10
10
6

729 100 116
729 100 117
729 100 119
729 100 121

1.470 70 162
2.150 80 185
3.372 101 225
8.200 131 282

50
63
75 2 1∕2
90
110
140
160
200
250

PN

21
26
31
40
49

23
27
33
39
47

146
166
207
263

Elbow 45° ABS metric
• >d225 - maximum operating temperature: +40°C
d

[mm]

d

[inch]

20
25
32
40
50

PN

Code

kg

z

D

[mm] [mm]

[mm]

16
16
10
10
10

729 150 106
729 150 107
729 150 108
729 150 109
729 150 110

0.008
0.013
0.046
0.082
0.121

5
6
8
10
12

63
75 2 1∕2
90
110
140
5

10
10
10
10
10

729 150 111
729 150 112
729 150 113
729 150 114
729 150 116

0.144
0.228
0.362
0.775
1.190

14 76 52
17 89 61
20 107 71
28 131 89
32 162 108

160
200
225
250
280
315

10
10
10
6
6
6

729 150 117
729 150 119
729 150 120
729 150 121
729 150 122
729 150 123

1.680
2.506
3.100
7.200
10.500
14.600

36
43
49
60
66
74

25
31
40
49
61

L

185
225
250
282
318
356

21
25
30
36
43

122
149
168
192
213
239

27

29 20 01

Tee 90° ABS metric
• >d225 - maximum operating temperature: +40°C
d

[mm]

d

[inch]

16
20
25
32
40

29 20 01

kg

z

[mm]

D

[mm]

[mm]

729 200 105
729 200 106
729 200 107
729 200 108
729 200 109

0.010
0.014
0.024
0.042
0.074

9
11
14
17
21

10
10
10
10
10

729 200 110
729 200 111
729 200 112
729 200 113
729 200 114

0.131
0.250
0.421
0.687
1.020

26 61 57
34 76 72
40 90 84
47 107 98
55 133 116

5 10
10
10
10
6
6
6

729 200 116
729 200 117
729 200 119
729 200 120
729 200 121
729 200 122
729 200 123

2.500
3.700
4.430
6.850
12.400
17.300
24.100

71
81
101
114
132
152
168

21
25
31
40
49

L

169
193
225
256
282
318
356

23
27
33
39
47

147
167
207
233
263
298
332

Tee 90° reducing ABS metric
d

[mm]

d1

[mm]

PN

Code

kg

25
32
40
40
50

20
25
25
32
25

16
10
10
10
10

729 200 134
729 200 138
729 200 151
729 200 147
729 200 010

0.029
0.048
0.081
0.085
0.135

50
63
63
63
75

32
25
32
50
40

10
10
10
10
10

729 200 164
729 200 011
729 200 178
729 200 170
729 200 182

0.200
0.245
0.249
0.265
0.500

90
90
110
110
140

32
63
32
50
50

10
10
10
10
10

729 200 143
729 200 146
729 200 144
729 200 136
729 200 148

1.000
0.900
2.000
1.900
1.899

140 75 10 729 200 149
160 90 10 729 200 158
200 110 10 729 200 153
225 110 10 729 200 156
225 160 10 729 200 157

2.500
2.800
6.110
7.500
7.900

d

[mm]

25
32
40
40
50
28

Code

16
16
16
10
10

50
63
75 2 1∕2
90
110
140
160
200
225
250
280
315

PN

d1

[mm]

20
25
25
32
25

z

[mm]

14
17
23
23
28

z1

[mm]

14
17
23
23
28

D

[mm]

33
41
50
50
62

table continued next page

L

[mm]

33
39
49
49
59

L1

[mm]

30
36
42
45
47

Closest inch
run-branch-run

- 1∕2 - 3∕4
1 - 3∕4 - 1
1 1∕4 - 3∕4 - 1 1∕4
1 1∕4 - 1 - 1 1∕4
1 1∕2 - 3∕4 - 1 1∕2
3∕4

d

[mm]

d1

z

[mm]

z1

[mm]

[mm]

L

L1

[mm]

Closest inch
run-branch-run

[mm]

32
25
32
50

28
34
35
35

28
34
34
34

62
77
77
77

59
73
73
73

50
53
56
65

75

40

40

41

92

84

66

1 1∕2 - 1 - 1 1∕2
2 - 3∕4 - 2
2-1-2
2 - 1 1∕2 - 2
2 1∕2 - 1 1∕4 - 2

90
90
110
110
140

32
63
32
50
50

46
46
56
56
72

55
55
67
67
82

110 97 93
110 97 93
133 117 89
133 117 98
172 148 113

3-1-3
3-2-3
4-1-4
4 - 1 1∕2 - 4
5 - 1 1∕2 - 5

172
192
232
257
257

5 - 2 1∕2 - 5
6-3-6
7-4-7
8-4-8
8-6-8

148
167
213
239
239

1∕2

122
142
192
204
205

Tee 45° ABS metric
d

[mm]

d

[inch]

20
25
32
40
50

29 30 01

[mm]

50
63
63
63

140 75 72 78
160 90 81 91
200 110 106 131
225 110 119 143
225 160 119 119

29 25 01

D

PN

10
10
10
10
10

Code

kg

z

z1

[mm]

D

[mm] [mm]

729 250 106
729 250 107
729 250 108
729 250 109
729 250 110

0.027
0.043
0.073
0.119
0.202

30
36
45
56
66

63
10 729 250 111
75 2 1∕2 6 729 250 112
90
6 729 250 113
110
6 729 250 114
140
5 6 729 250 116

0.325
0.637
0.940
1.870
4.315

85
101
122
149
190

6
9
10
10
12

L

[mm]

28 68
33 83
41 99
50 118
60 140

L1

[mm]

46
55
67
82
97

14 74 175 123
18 91 207 145
20 107 245 173
27 134 298 210
34 168 376 266

Cross ABS metric
d

[mm]

PN

Code

32 10 729 300 108
63 10 729 300 111

kg

0.070
0.361

z

D

L

[mm] [mm] [mm]

17
34

43
79

39
72

29

29 91 01

Socket ABS metric
• >d225 - maximum operating temperature: +40°C
d

[mm]

d

[inch]

16
20
25
32
40

29 91 31

Code

kg

z

D

[mm] [mm]

L

[mm]

16
16
16
10
10

729 910 105
729 910 106
729 910 107
729 910 108
729 910 109

0.005
0.007
0.011
0.020
0.034

3
3
3
3
3

10
10
10
10
10

729 910 110
729 910 111
729 910 112
729 910 113
729 910 114

0.060
0.107
0.140
0.242
0.570

3 61 65
3 76 79
4 87 92
5 104 107
5 131 132

5 10
10
10
10
6
6
6

729 910 116
729 910 117
729 910 119
729 910 120
729 910 121
729 910 122
729 910 123

0.760
1.176
1.480
2.500
5.400
6.600
8.100

50
63
75 2 1∕2
90
110
140
160
200
225
250
280
315

PN

7
8
9
10
16
16
16

22
26
32
40
49

162
183
221
253
284
321
356

31
35
41
47
55

159
180
221
248
284
314
348

Adaptor socket ABS metric/Inch BS
Model:
• with BS Inch and metric solvent cement sockets
d

[mm]

d

[inch]

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

29 90 09

PN

10
10
10
10
10

Code

kg

z

L

[mm] [mm]

35
38
45
51
60

D

[mm]

729 913 105
729 913 106
729 913 107
729 913 108
729 913 109

0.007
0.010
0.016
0.025
0.045

5
5
5
5
5

23
27
33
41
51

50 1 1∕2 10 729 913 110
63
2 10 729 913 111
90
3 10 729 913 113
110
4 10 729 913 115

0.070
0.130
0.365
0.630

4 65 59
5 79 75
6 108 104
7 135 134

Barrel nipple ABS metric
Model:
•
•
•
•

With solvent cement spigots on both sides
For quick connections between fittings
For the shortest possible distance between fittings
Overall length L = 2 x socket length

d

[mm]

30

d

[inch]

PN

Code

kg

L

[mm]

16
20
25
32
40

16
16
16
10
10

729 900 905
729 900 906
729 900 907
729 900 908
729 900 909

0.003
0.004
0.007
0.009
0.017

28
32
38
44
52

50
63

10 729 900 910
10 729 900 911

0.032
0.063

62
76

table continued next page

d

[mm]

d

[inch]

PN

Code

75 2 1∕2 10 729 900 912
90
10 729 900 913
110
10 729 900 914

29 90 03

kg

L

[mm]

0.102 88
0.173 102
0.309 122

Reducing bush ABS metric
Model:
• With solvent cement spigot and socket metric
d

[mm]

d1

[mm]

PN

Code

kg

z

L

[mm] [mm]

20
25
32
32
40

16
20
20
25
20

16
16
10
10
10

729 900 334
729 900 337
729 900 342
729 900 341
729 900 348

0.003
0.005
0.012
0.009
0.016

2
3
6
4
10

16
19
22
22
26

40
40
50
50
50

25
32
20
25
32

10
10
10
10
10

729 900 347
729 900 346
729 900 355
729 900 354
729 900 353

0.016
0.012
0.024
0.025
0.035

7
4
15
12
9

26
26
31
31
31

50
63
63
63
75

40
32
40
50
50

10
10
10
10
10

729 900 352
729 900 360
729 900 359
729 900 358
729 900 365

0.038
0.060
0.067
0.044
0.105

5
16
12
7
13

31
38
38
36
44

75
90
90
90
110

63
50
63
75
63

10
10
10
10
10

729 900 364
729 900 372
729 900 371
729 900 370
729 900 378

0.076
0.136
0.130
0.133
0.238

7
20
14
7
24

44
51
51
51
61

110
125
140
160
160

90
110
110
110
140

10
10
10
10
10

729 900 376
700 244 660
729 900 385
729 900 390
729 900 388

0.196
0.356
0.454
0.666
0.416

10
8
15
25
10

61
69
76
86
86

200
225
225
250
280
315

160 10 729 900 392
160 10 729 900 396
200 10 729 900 181
225 6 729 900 303
250 6 729 900 306
280 6 729 900 312

0.818
1.640
1.440
1.000
2.500
3.350

20
33
13
12
15
17

106
119
119
131
146
164

31

29 91 03

Reducing bush long ABS metric
d

d1

[mm] [mm]

32
40
50
63
75
90

29 96 01

10
10
10
10
10
10

Code

kg

729 910 342
729 910 347
729 910 354
729 910 360
729 910 366
729 910 371

z

L

[mm] [mm]

0.016
0.026
0.041
0.077
0.115
0.218

30 46
36 55
44 63
54 76
62 88
74 112

Cap ABS metric
d

[mm]

32

20
25
25
32
40
63

PN

PN

Code

kg

16
20
25
32
40

16
16
16
10
10

729 960 105
729 960 106
729 960 107
729 960 108
729 960 109

0.006
0.008
0.013
0.020
0.034

50
63
75
90
110
140
160

10
10
10
10
10
10
10

729 960 110
729 960 111
729 960 112
729 960 113
729 960 114
729 960 116
729 960 117

0.034
0.086
0.115
0.215
0.480
0.880
1.130

D

[mm]

26
30
37
44
55

L

[mm]

24
25
30
34
41

64 44
80 54
87 65
112 77
145 101
163 114
188 130

Adaptor fittings
29 10 02

Elbow 90° ABS metric Rp
Model:
•
•
•
•
•
d

With solvent cement socket metric and parallel female thread Rp
Reinforcing ring stainless (A2)
Connection to plastic or metal threads
Do not use thread sealing pastes that are harmful to ABS
Install with low mechanical stress and avoid large cyclic temperature changes
Rp

[mm] [inch]
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

29 91 02

PN

10
10
10
10
10
10

Code

729 100 206
729 100 207
729 100 208
729 100 209
729 100 210
729 100 211

kg

z1

z2

D

L

[mm] [mm] [mm] [mm]

0.018
0.028
0.047
0.088
0.128
0.233

11
14
17
23
27
33

14
17
22
27
36
46

30
35
45
55
62
75

27
33
39
50
58
73

Socket ABS metric Rp
Model:
•
•
•
•
•
d

With solvent cement socket metric and parallel female thread Rp
Reinforcing ring stainless (A2)
Connection to plastic or metal threads
Do not use thread sealing pastes that are harmful to ABS
Install with low mechanical stress and avoid large cyclic temperature changes
Rp

[mm] [inch]
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

29 91 04

PN

10
10
10
10
10
10

Code

729 910 206
729 910 207
729 910 208
729 910 209
729 910 210
729 910 211

kg

z

L

s

[mm] [mm] [mm]

0.020
0.030
0.040
0.069
0.100
0.162

4
3
3
5
7
7

35
40
45
51
59
69

32
36
46
55
65
80

Reducing bush ABS metric Rp
Model:
•
•
•
•
•
d

With solvent cement spigot metric and parallel female thread Rp
Reinforcing ring stainless (A2)
Connection to plastic or metal threads
Do not use thread sealing pastes that are harmful to ABS
Install with low mechanical stress and avoid large cyclic temperature changes
Rp

[mm] [inch]
3∕8
20
1∕2
25
3∕4
32
40
1
50 1 1∕4
63 1 1∕2

PN

10
10
10
10
10
10

Code

729 910 434
729 910 437
729 910 441
729 910 446
729 910 452
729 910 458

kg

0.012
0.018
0.027
0.048
0.073
0.106

z

D

L

[mm] [mm] [mm]

7
7
15
20
20
10

25
30
35
45
55
62

35
41
48
56
66
77

33

29 90 04

Adaptor ABS metric Rp
Model:
•
•
•
•

With solvent cement spigot metric and parallel female thread Rp
Connection to plastic threads only
Do not use thread sealing pastes that are harmful to ABS
Install with low mechanical stress and avoid large cyclic temperature changes

d

Rp

[mm] [inch]
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

29 91 05

PN

10
10
10
10
10
10

Code

kg

729 900 406
729 900 407
729 900 408
729 900 409
729 900 410
729 900 411

z

L

D

[mm] [mm] [mm]

0.009
0.014
0.026
0.046
0.073
0.127

21
23
27
33
38
47

37
41
48
56
61
74

28
33
42
52
62
77

Adaptor spigot nipple ABS metric R
Model:
•
•
•
•

With solvent cement spigot metric and taper male thread R
Connection to plastic threads only
Do not use thread sealing pastes that are harmful to ABS
Install with low mechanical stress and avoid large cyclic temperature changes

d

R

[mm] [inch]

16

29 91 05

3∕8

PN

Code

kg

10 729 910 505

z

s

[mm] [mm]

0.009

35

27

Adaptor socket nipple ABS metric R
Model:
• With solvent cement spigot/socket metric and taper male thread R
• Connection for plastic threads
• Do not use thread sealing pastes that are harmful to ABS
d

d1

R

[mm] [mm] [inch]

16
20
25
32
40
50

34

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

PN

10
10
10
10
10
10

Code

729 910 556
729 910 557
729 910 558
729 910 559
729 910 560
729 910 561

kg

0.012
0.020
0.031
0.050
0.070
0.123

z

z1

s

[mm] [mm] [mm]

42
47
54
60
66
78

28
31
35
38
40
47

32
36
46
55
65
80

Threaded fittings
29 96 19

Plug ABS R
Model:
• With taper male thread R
• Connection to plastic threads only
• Do not use thread sealing pastes that are harmful to ABS
R

[inch]

PN

Code

10 729 961 906
10 729 961 907
1 10 729 961 908

1∕2
3∕4

29 91 06

kg

s

L

[mm] [mm]

0.008
0.014
0.022

27
36
41

25
29
32

Threaded socket ABS Rp
Model:
•
•
•
•

With parallel female thread Rp
Connection to plastic threads only
Do not use thread sealing pastes that are harmful to ABS
Install with low mechanical stress and avoid large cyclic temperature changes

Rp

[inch]

PN

Code

10 729 910 606
10 729 910 607
1 10 729 910 608

1∕2
3∕4

kg

0.019
0.022
0.041

z

L

s

[mm] [mm] [mm]

9
9
11

35
39
45

32
36
46

35

29 91 15

Threaded nipple R ABS
Model:
BSP taper male threads (R)
Connection to plastic threads only
Do not use thread sealing pastes that are harmful to ABS
Install with low mechanical stress and avoid large cyclic temperature changes

•
•
•
•
R

[inch]

PN

Code

kg

B
A
A
A
B

729 911 505
22 729 911 906
27 729 911 907
36 729 911 908
729 911 509

1 1∕2
2
3
4

B
B
B
B

729 911 510
729 911 511
729 911 513
729 911 515

10
10
10
10

L

[mm]

0.014
0.009
0.014
0.026
0.053

[mm]

16
20
25
32

PN

10
10
10
10

Code

729 960 405
729 960 406
729 960 407
729 960 408

kg

0.007
0.011
0.016
0.026

43
45
49
57
75

0.031 88
0.135 88
0.196 128
0.357 153

Hose connector ABS metric
d

36

[mm]

10
1∕2
10
3∕4
10
1 10
1 1∕4 10
3∕8

29 96 04

Type S

D

L

[mm] [mm]

16
20
25
30

57
73
79
89

Flange adaptor
29 79 01

Flange adaptor ABS metric
Model:
Flat sealing faces/serrated
Counter part: Same flange adaptor
Gasket: Profile flange gasket EPDM No. 48 44 07, FPM No. 49 44 07
Gasket: Flat gasket EPDM No. 48 40 03

•
•
•
•

• >d225 - maximum operating temperature: +40°C
d

[mm]

20
25
32
40
50

DN

[mm]

d

[inch]

15
20
25
32
40

PN

Code

kg

z

D

[mm] [mm]

[mm]

L

[mm]

L1

[mm]

10
10
10
10
10

729 790 106
729 790 107
729 790 108
729 790 109
729 790 110

0.008
0.012
0.020
0.058
0.058

3
3
3
3
3

34
41
50
61
73

21
24
27
30
34

6
7
7
8
8

63 50
75 65 2 1∕2
90 80
110 100
140 125
5

10
10
10
10
10

729 790 111
729 790 112
729 790 113
729 790 114
729 790 116

0.074
0.118
0.187
0.300
0.567

3 76 90
3 91 106
5 108 125
5 131 150
5 165 188

41
47
56
66
81

9
10
11
12
14

160
200
225
250
280
315

10
10
10
6
6
6

729 790 117
729 790 119
729 790 120
729 790 121
729 790 122
729 790 123

0.800
1.120
1.300
1.000
2.161
3.321

5
6
6
9
5
8

91
112
125
140
151
172

16
24
25
23
23
27

150
200
200
250
250
300

27
33
41
50
61

D1

188
224
248
274
307
346

213
250
274
303
329
379

37

Unions
29 51 01

Union ABS metric
Model:
• Union End: Solvent cement socket metric
• Union bush: Solvent cement socket metric
• Gasket: O-ring EPDM No. 48 41 00
d

[mm]

d

[inch]

16
20
25
32
40
50
63
75 2 1∕2
90
110

38

PN

Code

kg

z1

z2

D

[mm] [mm] [mm]

L1

L2

[mm] [mm]

G/Tr

10
10
10
10
10

729 510 105
729 510 106
729 510 107
729 510 108
729 510 109

0.025
0.035
0.050
0.070
0.130

5
4
5
5
3

10
10
10
10
12

35
43
53
60
74

19
21
24
27
31

24
26
29
33
39

3/4
1
1 1/4
1 1/2
2

10
10
10
10
10

729 510 110
729 510 111
729 510 112
729 510 313
729 510 114

0.170
0.340
0.461
0.694
1.069

3
3
3
5
5

14
18
18
18
11

83
103
135
158
158

33
40
47
56
66

46
2 1/4
58
2 3/4
62 Tr 108x5
69 Tr 128x5
72 Tr 154x5

Adaptor Unions
29 54 02

Adaptor union ABS/stainless steel metric Rp
Model:
•
•
•
•

Union End: Stainless Steel WN 1.4404 (316L), parallel female thread Rp
Union Bush: Solvent cement socket ABS metric
Union Nut: ABS
Gasket: O-ring EPDM No. 48 41 00

d

Rp

[mm] [inch]
3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

d

z1

PN

10
10
10
10
10
10
10
z2

EPDM
Code

29 54 07

9
11
11
12
14
15
15

0.053
0.096
0.154
0.212
0.356
0.455
0.721

729 540 205
729 540 206
729 540 207
729 540 208
729 540 209
729 540 210
729 540 211
D

[mm] [mm] [mm] [mm]

16
20
25
32
40
50
63

kg

10 35
10 43
10 51
10 58
12 74
14 83
18 100

L

L1

L2

G

s

[mm] [mm] [mm] [inch]

43
50
55
61
71
79
95

19
24
26
29
33
34
39

24
26
29
33
39
46
58

[mm]

3/4
1
1 1/4
1 1/2
2
2 1/4
2 3/4

19
24
29
36
45
54
63

Adaptor union ABS/stainless steel metric R
Model:
•
•
•
•
d

Union End: Stainless Steel WN 1.4404 (316L), taper male thread R
Union Bush: Solvent cement socket ABS metric
Union Nut: ABS
Gasket: O-ring EPDM No. 48 41 00
R

[mm] [inch]
3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

PN

10
10
10
10
10
10
10

EPDM
Code

729 540 705
729 540 706
729 540 707
729 540 708
729 540 709
729 540 710
729 540 711

kg

0.073
0.126
0.174
0.262
0.476
0.535
0.931

z

D

[mm] [mm]

L

[mm]

40 35 54
44 43 60
46 51 65
50 58 72
58 74 84
62 83 93
73 100 111

L1

L2

G

[mm] [mm] [inch]

30
34
36
40
46
48
55

24
26
29
33
39
46
58

3/4
1
11/4
11/2
2
21/4
23/4

s

[mm]

19
24
32
37
48
54
69

39

29 54 55

Adaptor union ABS/stainless steel metric
Welding end
Model:
•
•
•
•

Union End: Stainless Steel WN 1.4404 (316L) with welding end
Union Bush: Solvent cement socket ABS metric
Union Nut: Stainless Steel WN 1.4404 (316L)
Gasket: O-ring EPDM No. 48 41 00

d

d1

[mm] [mm]

16
20
25
32
40
50
63

29 53 03

17
21
27
34
42
48
60

PN

10
10
10
10
10
10
10

EPDM
Code

kg

z

0.101
0.176
0.204
0.313
0.493
0.566
0.902

729 545 505
729 545 506
729 545 507
729 545 508
729 545 509
729 545 510
729 545 511

L

L1

L2

e

28
32
33
36
38
42
50

42
48
52
58
64
73
88

18
22
23
26
26
28
32

24
26
29
33
39
46
58

1.6
2.0
2.0
2.0
2.0
2.0
2.6

Adaptor union ABS/malleable iron metric Rp
Model:
•
•
•
•
d

Union Nut: ABS
Union Bush: Solvent cement socket ABS metric
Union End: malleable iron with parallel female thread Rp
Gasket: O-Ring EPDM No. 48 41 00
Rp

PN* Code

kg

[mm] [inch] [bar]
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

d

D

[mm] [mm]

20 43
25 51
32 58
40 72
50 83
63 100

40

10
10
10
10
10
10
L

729 530 306
729 530 307
729 530 308
729 530 309
729 530 310
729 530 311
L1

L2

z1

0.064
0.095
0.139
0.240
0.339
0.516
z2

G

[mm] [mm] [mm] [mm] [mm] [inch]

48
51
58
69
78
91

22
22
26
31
33
35

26
29
33
39
46
58

9
7
9
12
14
11

G

[mm] [mm] [mm] [mm] [mm] [inch]

10
10
10
12
14
18

1
1 1/4
1 1/2
2
2 1/4
2 3/4

s

[mm]

25
31
38
48
54
67

3/4
1
1 1/4
1 1/2
2
2 1/4
2 3/4

s

[mm]

32
41
46
55
68
74
88

29 53 08

Adaptor union ABS/malleable iron metric R
Model:
•
•
•
•

Union Nut: ABS
Union Bush: Solvent cement socket ABS metric
Union End: Malleable iron with taper male thread R
Gasket: O-Ring EPDM No. 48 41 00

d

R

PN* Code

kg

[mm] [inch] [bar]
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

29 55 05

10
10
10
10
10
10

D

L

[mm]

[mm]

L1

0.100 43 66
0.147 51 72
0.198 58 80
0.400 72 95
0.490 83 104
0.675 100 118

729 530 806
729 530 807
729 530 808
729 530 809
729 530 810
729 530 811

L2

z

G

[mm] [mm] [mm] [inch]

40
43
48
57
59
62

26
29
33
39
46
58

50
53
58
69
73
80

s

[mm]

1
1 1/4
1 1/2
2
2 1/4
2 3/4

25
31
38
48
54
67

Adaptor union ABS/brass metric Rp
Model:
•
•
•
•

Union Nut: ABS
Union Bush: Solvent cement socket ABS metric
Union End: Brass with parallel female thread Rp
Gasket: O-Ring EPDM No. 48 41 00

d

Rp

[mm] [inch]
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

d

Rp

PN

10
10
10
10
10
10

Code

0.084
0.134
0.179
0.327
0.452
0.722

729 550 506
729 550 507
729 550 508
729 550 509
729 550 510
729 550 511

D

L

[mm] [inch] [mm]

L1

L2

z1

z2

G

[mm] [mm] [mm] [mm] [mm] [inch]

1∕2
20
43
3∕4
25
51
32
1 58
40 1 1∕4 72
50 1 1∕2 83
63
2 100

29 55 09

kg

48
54
60
70
81
98

22
25
27
31
35
40

26
29
33
39
46
58

7
9
8
10
14
14

10
11
11
13
21
21

s

[mm]

1
1 1/4
1 1/2
2
2 1/4
2 3/4

25
30
36
48
55
65

Adaptor union ABS/brass metric R
Model:
•
•
•
•

Union Nut: ABS
Union Bush: Solvent cement socket ABS metric
Union End: Brass with taper male thread R
Gasket: O-Ring EPDM No. 48 41 00

d

R

[mm] [inch]

20
25
25
25
32

PN

10
1∕2
10
3∕4
10
1 10
1∕2
10
1∕2

Code

729 550 906
729 550 957
729 550 907
729 550 967
729 550 958

table continued next page

kg

0.123
0.185
0.293
0.293
0.283

D

[mm]

43
51
51
51
58

L

[mm]

63
66
71
75
70

L1

L2

z

G

[mm] [mm] [mm] [inch]

37
37
42
46
37

26
29
29
29
33

47
48
52
57
48

1
1 1/4
1 1/4
1 1/4
1 1/2

s

[mm]

25
30
30
30
36

41

d

R

[mm] [inch]
3∕4
32
32
1
40 1 1∕4
50 2 1∕2
63
2

20 51 01

PN

10
10
10
10
10

Code

729 550 968
729 550 908
729 550 909
729 550 910
729 550 911

kg

D

[mm]

L

L1

[mm]

L2

z

G

[mm] [mm] [mm] [inch]

0.283 58 75
0.374 58 79
0.503 72 91
0.666 83 102
1.071 100 125

42
46
52
56
67

33
33
39
46
58

53
57
65
71
87

1 1/2
1 1/2
2
2 1/4
2 3/4

Adaptor union ABS/copper for soldering metric
Model:
•
•
•
•

Union End: Copper
Union Bush: Solvent cement socket ABS metric
Union Nut: brass
Gasket: O-ring EPDM No. 48 41 00

d

d1

[mm] [mm]

16
20
25
32
40
50

42

18
22
28
35
42
54

PN

10
10
10
10
10
10

Code

720 510 105
720 510 106
720 510 107
720 510 108
720 510 109
720 510 110

kg

0.079
0.140
0.269
0.198
0.350
0.438

L1

L2

z1

z2

G

[mm] [mm] [mm] [mm] [inch]

25
26
29
33
39
46

17
19
28
27
35
46

11
9
9
10
12
14

4
3/4
3
1
6 1 1/4
5 1 1/2
6
2
3 2 1/4

s

[mm]

32
40
50
52
66
72

s

[mm]

36
36
46
55
65

Union spare parts
29 60 01

Union end ABS metric
Model:
• Solvent cement socket metric
• For adaptor unions 29 53 02, 29 53 07, 29 55 02, 29 55 07
• For union 29 51 01
d

[mm]

29 64 01

PN

Code

kg

z

L

D

[mm] [mm] [mm]

24
30
39
44
57

D1

[mm]

16
20
25
32
40

10
10
10
10
10

729 600 105
729 600 106
729 600 107
729 600 108
729 600 109

0.004
0.007
0.012
0.016
0.042

5
4
5
5
3

19
21
24
27
31

22
28
36
41
53

50
63
75
90
110

10
10
10
10
10

729 600 110
729 600 111
729 600 162
729 600 163
729 600 164

0.045
0.084
0.109
0.178
0.295

3
3
3
5
5

34 63 59
41 78 74
47 101 91
56 121 108
66 146 131

Union bush ABS metric
Model:
• Solvent cement socket metric
• For union 29 51 01
• Jointing face: With O-Ring groove
d

[mm]

29 69 04

PN

Code

kg

z

D

[mm] [mm]

16
20
25
32
40

10
10
10
10
10

729 640 105
729 640 106
729 640 107
729 640 108
729 640 109

0.008
0.011
0.016
0.027
0.046

10
10
10
10
12

50
63
75
90
110

10
10
10
10
10

729 640 110
729 640 111
729 640 112
729 640 123
729 640 114

0.058
0.111
0.160
0.274
0.330

14 62
18 77
18 93
18 110
11 133

L

[mm]

24
28
33
41
50

G/Tr

24
26
29
33
39

3/4
1
1 1/4
1 1/2
2

46
2 1/4
58
2 3/4
62 Tr108x5
69 Tr128x5
72 Tr154x6

Union nut ABS
Model:
• For union 23 51 01
d

[mm]

16
20
25
32
40

PN

10
10
10
10
10

Code

729 690 405
729 690 406
729 690 407
729 690 408
729 690 409

50 10 729 690 410
63 10 729 690 411

kg

0.009
0.014
0.018
0.024
0.049

D

[mm]

L

d

[mm] [mm]

G/Tr

35
43
53
60
74

21
23
25
27
30

3/4
1
1 1/4
1 1/2
2

0.070 83
0.101 103

34
38

2 1/4
2 3/4

table continued next page

43

d

[mm]

PN

Code

75 10 729 690 012
90 10 729 690 013
110 10 729 690 014

44

kg

D

[mm]

0.188 135
0.267 158
0.423 188

L

d

[mm] [mm]

40
43
48

G/Tr

Tr108x5
Tr128x5
Tr154x6

Branch saddles
69 11 00

Branch saddle ABS metric
Model:
For ABS-pipes
Top saddle (ABS) for solvent cementing
Bottom part and wedges made from PVC-U
Outlet with solvent cement socket metric
PN 10

•
•
•
•
•
d

PN* Code

[mm]

kg

[bar]

90
110
160
225

10
10
10
10

169 110 056
169 110 066
169 110 097
169 110 117

0.786
0.864
1.185
1.483

d1

d2

Tapping-Ø L

[mm] [mm] [mm]

50
50
63
63

[mm]

40
40
49
49

39
39
48
48

105
105
120
120

654 - Blue clamp saddles with stainless steel reinforcing ring,
flat gasket and galvanized bolts and nuts (PN16-PN10)
•
•
•
•
•
•
•
•
•
•
•

water PN16-10
suitable for PE and PVC pipes
female thread: ISO 7 (parallel)
material: PP
gasket: O-ring with flat lip (NBR)
reinforcement ring: stainless steel AISI430
bolts and nuts : galvanized
colour: blue
B= N° of bolts
M= bolt type
(*) with O-ring gasket

d

Rp

[mm]

[inch]

* 20
* 25
* 25
* 32
* 32
* 32
40
40
40
50

PN

B

M

Code

kg

16
16
16
16
16

2
2
2
2
2

M8X40
M8X30
M8X30
M8X30
M8X30

158 001 041
158 001 042
158 001 043
158 001 044
158 001 045

0.119
0.110
0.123
0.103
0.115

1 16
16
3∕4
16
1 16
1∕2
16

2
2
2
2
4

M8X40
M8X40
M8X40
M8X40
M8X40

158 001 046
158 001 047
158 001 048
158 001 049
158 001 050

0.162
0.135
0.146
0.153
0.196

4
4
4
4
4

M8X40
M8X40
M8X40
M8X40
M8X40

158 001 051
158 001 052
158 001 053
158 001 054
158 001 055

0.209
0.217
0.221
0.212
0.222

M8X40 158 001 056
M8X40 158 001 058
M8X40 158 001 057

0.228
0.268
0.275

1∕2
1∕2
3∕4
1∕2
3∕4

1∕2

3∕4
50
50
1
50 1 1∕4
1∕2
63
3∕4
63

16
16
16
16
16

63
1 16 4
63 1 1∕4 16 4
63 1 1∕2 16 4

table continued next page

45

d

Rp

[mm]

[inch]

75
75

1∕2
3∕4

B

16 4
16 4

M

Code

kg

M8X60 158 001 059
M8X60 158 001 060

0.364
0.376

75
1 16
75 1 1∕4 16
75 1 1∕2 16
75
2 16
1∕2
90
16

4
4
4
4
4

M8X60
M8X60
M8X60
M8X60
M8X60

158 001 061
158 001 063
158 001 062
158 001 064
158 001 065

0.384
0.421
0.428
0.437
0.412

3∕4
90
90
1
90 1 1∕4
90 1 1∕2
90
2

16
16
16
16
16

4
4
4
4
4

M8X60
M8X60
M8X60
M8X60
M8X60

158 001 066
158 001 067
158 001 069
158 001 068
158 001 070

0.421
0.432
0.472
0.474
0.481

1∕2
110
3∕4
110
110
1
110 1 1∕4
110 1 1∕2

16
16
16
16
16

6
6
6
6
6

M8X50
M8X50
M8X50
M8X50
M8X50

158 001 071
158 001 072
158 001 073
158 001 075
158 001 074

0.511
0.523
0.533
0.565
0.566

2 16 6
3 6 6
1∕2
16 6
3∕4
16 6
1 16 6

M8X50
M8x70
M8X50
M8X50
M8X50

158 001 076
158 001 077
158 001 078
158 001 079
158 001 080

0.570
1.108
0.578
0.590
0.592

125 1 1∕4 16 6
125 1 1∕2 16 6
125
2 16 6
* 125
3 6 6
* 125
4 6 6

M8X50
M8X50
M8X50
M8X70
M8X70

158 001 082
158 001 081
158 001 083
158 001 084
158 001 085

0.629
0.627
0.640
1.009
1.051

6
6
6
6
6

M8X70
M8X70
M8X70
M8X70
M8X70

158 001 086
158 001 087
158 001 088
158 001 090
158 001 089

0.830
0.843
0.849
0.880
0.892

2 16 6
3 10 6
4 10 6
1∕2
16 6
3∕4
16 6

M8X70
M8X70
M8X70
M8X70
M8X70

158 001 091
158 001 092
158 001 093
158 001 094
158 001 095

0.898
1.132
1.196
0.899
0.908

110
* 110
125
125
125

1∕2
140
3∕4
140
140
1
140 1 1∕4
140 1 1∕2

140
* 140
* 140
160
160

46

PN

16
16
16
16
16

160
1 16
160 1 1∕4 16
160 1 1∕2 16
160
2 16
* 160
3 10

6
6
6
6
6

M8X70
M8X70
M8X70
M8X70
M8X70

158 001 096
158 001 098
158 001 097
158 001 099
158 001 100

0.917
0.950
0.954
0.956
1.185

* 160
4
* 180
1
* 180 1 1∕4
* 180 1 1∕2
* 180
2

10
10
10
10
10

6
6
6
6
6

M8X70
M10X80
M10X80
M10X80
M10X80

158 001 101
158 001 102
158 001 104
158 001 103
158 001 105

1.262
1.980
2.013
2.007
2.018

* 180
3
* 180
4
* 200 1 1∕2
* 200
2

10
10
10
10

6
6
6
6

M10X80
M10X80
M10X80
M10X80

158 001 106
158 001 107
158 001 108
158 001 109

2.043
2.092
1.966
1.946

table continued next page

d

Rp

[mm]

[inch]

* 200

PN

B

M

3 10 6

* 200
4 10 6
* 225 1 1∕2 10 6
* 225
2 10 6
* 225
3 10 6
* 225
4 10 6

Code

kg

M10X80 158 001 110

1.980

M10X80
M10X80
M10X80
M10X80
M10X80

158 001 111
158 001 112
158 001 113
158 001 114
158 001 115

2.020
2.049
2.050
2.150
2.184

* 250
* 250
* 250
280
* 280

2
3
4
2
3

10
10
10
10
10

6 M10X80 158 001 116
6 M10X80 158 001 117
6 M10X80 158 001 118
6 M10X160 158 001 119
6 M10X160 158 001 120

2.472
2.466
2.478
3.440
3.543

* 280
315
* 315
* 315

4
2
3
4

10
10
10
10

6
6
6
6

3.585
4.156
4.267
4.279

d

Rp

[mm]

d1

[inch] [mm]

* 20
* 25
* 25
* 32
* 32

M10X160
M10X110
M10X110
M10X110

L

[mm]

L1

[mm]

158 001 121
158 001 122
158 001 123
158 001 124

H

[mm]

H1

[mm]

12
13
13
14
14

46
49
49
49
49

77
79
79
79
79

59
58
58
62
62

26
15
15
20
20

1∕2

14
21
21
21
21

62
62
62
62
62

87
86
86
86
86

70
71
71
70
82

20
20
20
19
20

3∕4
50
50
1
50 1 1∕4
1∕2
63
3∕4
63

21
21
21
18
24

62 86
62 86
62 86
62 101
62 101

82
82
82
96
96

20
20
20
21
21

63
1
63 1 1∕4
63 1 1∕2
1∕2
75
3∕4
75

31
31
31
16
21

62
62
62
79
79

101 96
101 96
101 96
123 102
123 104

21
21
21
14
16

75
1
75 1 1∕4
75 1 1∕2
75
2
1∕2
90

27
35
42
53
16

79
79
79
79
87

123
123
123
123
138

107
109
109
112
116

19
21
21
24
14

3∕4
90
90
1
90 1 1∕4
90 1 1∕2
90
2

21
27
35
42
53

87
87
87
87
87

138
138
138
138
138

118
121
123
123
126

16
19
21
21
24

1∕2
110
3∕4
110
110
1
110 1 1∕4

15
20
26
35

99
99
99
99

152
152
152
152

150
150
150
150

23
23
23
23

* 32
40
40
40
50

1∕2
1∕2
3∕4
1∕2
3∕4

1
1∕2
3∕4

1

table continued next page

47

d

[mm]

Rp

d1

[inch] [mm]

110 1 1∕2

L1

[mm]

H

[mm]

H1

[mm]

23

51 99 152 150
85 99 152 150
15 101 166 169
20 101 166 169
26 101 166 169

23
23
24
24
24

125 1 1∕4
125 1 1∕2
125
2
* 125
3
* 125
4

35
41
50
85
90

101
101
101
139
139

166
166
166
178
178

168
168
168
180
181

23
23
23
37
38

1∕2
140
3∕4
140
140
1
140 1 1∕4
140 1 1∕2

18
24
30
38
45

114
114
114
114
114

207
207
207
207
207

191
191
191
191
191

25
25
25
25
24

3∕4

50
85
90
18
24

114
142
142
114
114

207
208
208
226
226

191
201
201
215
215

24
38
38
24
24

160
1
160 1 1∕4
160 1 1∕2
160
2
* 160
3

30
37
45
51
84

114
114
114
114
142

226
226
226
226
228

215
215
215
215
222

24
24
24
24
38

* 160
4
* 180
1
* 180 1 1∕4
* 180 1 1∕2
* 180
2

90
30
36
54
54

142
169
169
169
169

228
262
262
262
262

222
265
265
265
265

38
38
38
38
38

* 180
3 85 169 262 265
* 180
4 103 169 262 267
* 200 1 1∕2 45 169 262 265
* 200
2 54 169 262 265
* 200
3 85 169 262 265

38
40
38
38
38

* 200
4 103
* 225 1 1∕2 45
* 225
2 51
* 225
3 85
* 225
4 103

140
* 140
* 140
160
160

48

[mm]

99 152 150

110
* 110
125
125
125

2
3
1∕2
3∕4

1

2
3
4
1∕2

41

L

262
287
287
287
287

267
287
287
295
295

40
26
26
37
38

* 250
* 250
* 250
280
* 280

2 55 178 310
3 85 178 310
4 103 178 310
2 51 179 335
3 78 179 335

314
314
314
326
338

38
38
38
31
41

* 280
315
* 315
* 315

4
2
3
4

338
350
363
363

46
31
41
46

98
51
78
98

169
145
145
174
174

179
246
246
246

335
390
390
390

Ball valves
Ball valve type 546 ABS
With solvent cement sockets BS Inch
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Without mounting inserts
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Inch DN

[mm]

PN

kv-value
(Δp=1 bar)
[l/min]

EPDM
Code

kg

10
15
20
25
32

10
10
10
10
10

71
185
350
700
1000

169 546 201
169 546 202
169 546 203
169 546 204
169 546 205

0.112
0.114
0.178
0.258
0.457

40
50
65
3 80
4 100

10
10
10
10
10

1600
3100
5000
7000
11000

169 546 206
169 546 207
169 546 008
169 546 209
169 546 210

0.642
1.175
3.900
5.700
9.100

3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2

Inch D

[mm]

3∕8
1∕2
3∕4

1
1 1∕4

50
50
58
68
84

1 1∕2 97
2 124
166
3 200
4 238

H

[mm]

57
57
67
73
90

H1

[mm]

L

[mm]

L1

[mm]

27 92 77
27 95 77
30 110 97
36 123 97
44 146 128

97 51 157
116 64 183
149 85 233
161 105 254
178 123 301

128
152
270
270
320

L2

[mm]

56
56
65
71
85

L4

[mm]

25
25
25
25
45

89 45
101 45
136 70
141 70
164 120

L5

L6

[mm] [mm]

32
32
39
39
54

45
45
58
58
74

z

[mm]

60
60
69
75
89

54 74 97
66 87 110
64 206 144
64 206 151
64 256 174

49

Ball valve type 546 ABS
With mounting inserts
With solvent cement sockets BS Inch
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Integrated stainless steel mounting inserts
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Inch DN

[mm]

kv-value
(Δp=1 bar)
[l/min]

EPDM
Code

kg

10
15
20
25
32

10
10
10
10
10

71
185
350
700
1000

169 546 241
169 546 242
169 546 243
169 546 244
169 546 245

0.112
0.114
0.178
0.258
0.457

40
50
65
3 80
4 100

10
10
10
10
10

1600
3100
5000
7000
11000

169 546 246
169 546 247
169 546 068
169 546 249
169 546 250

0.642
1.175
3.900
5.700
9.100

3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2

Inch D

[mm]

3∕8
1∕2
3∕4

1
1 1∕4

50
50
58
68
84

1 1∕2 97
2 124
166
3 200
4 238

50

PN

H

[mm]

57
57
67
73
90

H1

[mm]

27
27
30
36
44

97 51
116 64
149 85
161 105
178 123

H2

L

[mm] [mm]

L1

[mm]

12 92 77
12 95 77
12 110 97
12 123 97
15 146 128
15
15
15
15
22

157
183
233
254
301

128
152
270
270
320

L2

[mm]

56
56
65
71
85

L4

[mm]

25
25
25
25
45

89 45
101 45
136 70
141 70
164 120

L5

L6

[mm] [mm]

32
32
39
39
54

45
45
58
58
74

M

z

[mm]

M6
M6
M6
M6
M8

60
60
69
75
89

54 74 M8
66 87 M8
64 206 M8
64 206 M8
64 256 M12

97
110
144
151
174

Ball valve type 546 ABS
With lockable handle
With solvent cement sockets BS Inch
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Integrated stainless steel mounting inserts
• Lockable hand lever with ratchet settings
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Inch DN

[mm]

PN

kv-value
(Δp=1 bar)
[l/min]

EPDM
Code

kg

10
15
20
25
32

10
10
10
10
10

71
185
350
700
1000

169 546 221
169 546 222
169 546 223
169 546 224
169 546 225

0.121
0.123
0.193
0.273
0.480

40
50
65
3 80
4 100

10
10
10
10

1600
3100
5000
7000
11000

169 546 226
169 546 227
169 546 088
169 546 229
169 546 230

0.665
1.205
4.200
6.100
9.400

3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2

Inch D

H

3∕8

50 79
50 79
58 88
68 94
84 113

[mm]

1∕2
3∕4

1
1 1∕4

1 1∕2 97
2 124
166
3 200
4 238

[mm]

H1

[mm]

27
27
30
36
44

119 51
141 64
224 85
235 105
245 123

H2

L

[mm] [mm]

L1

[mm]

12 92 87
12 95 87
12 110 108
12 123 108
15 146 140
15
15
15
15
22

157
183
233
254
301

140
165
270
270
320

L2

[mm]

56
56
65
71
85

L4

[mm]

25
25
25
25
45

89 45
101 45
136 70
141 70
164 120

L5

L6

[mm] [mm]

42
42
50
50
66

45
45
58
58
75

M

z

[mm]

M6
M6
M6
M6
M8

60
60
69
75
89

66 75 M8
78 87 M8
64 206 M8
64 206 M8
64 256 M12

97
110
144
151
174

51

Ball valve type 546 ABS
With solvent cement sockets metric
Model:
• For easy installation and removal
• z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Ball seals PTFE
• Without mounting inserts
Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d

[mm]

DN

[mm]

16
20
25
32
40

kv-value
(Δp=1 bar)
[l/min]

EPDM
Code

kg

10
15
20
25
32

10
10
10
10
10

71
185
350
700
1000

169 546 001
169 546 002
169 546 003
169 546 004
169 546 005

0.112
0.114
0.178
0.258
0.457

50 40
63 50
75 65
90 80
110 100

10
10
10
10
10

1600
3100
5000
7000
11000

169 546 006
169 546 007
169 546 008
169 546 009
169 546 010

0.642
1.175
3.900
5.700
9.100

d

[mm]

52

PN

D

[mm]

16
20
25
32
40

50
50
58
68
84

50
63
75
90
110

97
124
166
200
238

H

[mm]

57
57
67
73
90

H1

[mm]

L

[mm]

L1

[mm]

27 92 77
27 95 77
30 110 97
36 123 97
44 146 128

97 51 157
116 64 183
149 85 233
161 105 254
178 123 301

128
152
270
270
320

L2

[mm]

56
56
65
71
85

L4

[mm]

25
25
25
25
45

89 45
101 45
136 70
141 70
164 120

L5

L6

[mm] [mm]

32
32
39
39
54

45
45
58
58
74

z

[mm]

64
64
72
79
94

54 74 95
66 87 107
64 206 144
64 206 151
64 256 174

Ball valve type 546 ABS
With mounting inserts
With solvent cement sockets metric
Model:
For easy installation and removal
Ball seals PTFE
Integrated stainless steel mounting inserts
z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)

•
•
•
•

Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d

[mm]

DN

[mm]

16
20
25
32
40

PN

kv-value
(Δp=1 bar)
[l/min]

EPDM
Code

kg

10
15
20
25
32

10
10
10
10
10

71
185
350
700
1000

169 546 061
169 546 062
169 546 063
169 546 064
169 546 065

0.112
0.114
0.178
0.258
0.457

50 40
63 50
75 65
90 80
110 100

10
10
10
10
10

1600
3100
5000
7000
11000

169 546 066
169 546 067
169 546 068
169 546 069
169 546 070

0.642
1.175
3.900
5.700
9.100

d

[mm]

D

[mm]

16
20
25
32
40

50
50
58
68
84

50
63
75
90
110

97
124
166
200
238

H

[mm]

57
57
67
73
90

H1

[mm]

27
27
30
36
44

97 51
116 64
149 85
161 105
178 123

H2

L

[mm] [mm]

L1

[mm]

12 92 77
12 95 77
12 110 97
12 123 97
15 146 128
15
15
15
15
22

157
183
233
254
301

128
152
270
270
320

L2

[mm]

56
56
65
71
85

L4

[mm]

25
25
25
25
45

89 45
101 45
136 70
141 70
164 120

L5

L6

[mm] [mm]

32
32
39
39
54

45
45
58
58
74

M

z

[mm]

M6
M6
M6
M6
M8

64
64
72
79
94

54 74 M8
66 87 M8
64 206 M8
64 206 M8
64 256 M12

95
107
144
151
174

53

Ball valve type 546 ABS
With mounting inserts
With threaded sockets Rp
Model:
For easy installation and removal
Ball seals PTFE
Integrated stainless steel mounting inserts
z-dimension, valve end and union nut are not compatible with type 346

•
•
•
•

Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
Rp

DN

[inch] [mm]

10
15
20
25
32
40
50

3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2
Rp

D

[inch] [mm]

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10

71
185
350
700
1000
1600
3100

H

[mm]

50 57
1∕2
50 57
3∕4
58 67
1 68 73
1 1∕4 84 90
1 1∕2 97 97
2 124 116
3∕8

H1

EPDM
Code

0.112
0.114
0.178
0.258
0.457
0.642
1.175

169 546 021
169 546 022
169 546 023
169 546 024
169 546 025
169 546 026
169 546 027

H2

L

[mm] [mm] [mm]

27
27
30
36
44
51
64

kg

12
12
12
12
15
15
15

L1

[mm]

L2

[mm]

95 77 56
100 77 56
114 97 65
127 97 71
146 128 85
152 128 89
177 152 101

L4

L5

L6

[mm] [mm] [mm]

25
25
25
25
45
45
45

32
32
39
39
54
54
66

45
45
58
58
74
74
87

M

z

[mm]

M6 69
M6 67
M6 78
M6 85
M8 100
M8 106
M8 121

Ball valve type 546 ABS
With mounting inserts
With butt fusion spigots long PE100 SDR11 metric
Model:
•
•
•
•

For easy installation and removal
Ball seals PTFE
Integrated stainless steel mounting inserts
z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)

Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d

DN

[mm] [mm]

20
25
32

54

PN

15 10
20 10
25 10

kv-value
(Δp=1 bar)
[l/min]

EPDM
Code

185 800 024 832
350 800 024 834
700 800 015 141

table continued next page

kg

0.150
0.220
0.310

d

DN

[mm] [mm]

40
50
63
d

PN

kv-value
(Δp=1 bar)
[l/min]

32 10
40 10
50 10
D

[mm] [mm]

H

[mm]

20 50 57
25 58 67
32 68 73
40 84 90
50 97 97
63 124 116

EPDM
Code

kg

1000 800 015 142
1600 800 015 179
3100 800 015 143
H1

H2

L

[mm] [mm] [mm]

27
30
36
44
51
64

12
12
12
15
15
15

L1

[mm]

0.530
0.740
1.370
L2

[mm]

193 77 56
216 97 65
223 97 71
249 128 85
271 128 89
321 152 101

L4

L5

L6

[mm] [mm] [mm]

25
25
25
45
45
45

32
39
39
54
54
66

45
58
58
74
74
87

M

e

[mm]

M6 2,25
M6 2,3
M6 2,9
M8 3,7
M8 4,6
M8 5,8

55

Ball valve type 546 ABS
With lockable handle
With solvent cement sockets metric
Model:
For easy installation and removal
Ball seals PTFE
Integrated stainless steel mounting inserts
z-dimension, valve end and union nut are not compatible with type 346
(DN10/15-50) resp. type 370 (DN65-100)
• Lockable hand lever with ratchet settings
•
•
•
•

Option:
• Individual configuration of the valve (see diagram)
• Multifunctional module with integrated limit switches
• Pneumatic or electric actuators from +GF+
d

[mm]

DN

[mm]

16
20
25
32
40

kv-value
(Δp=1 bar)
[l/min]

EPDM
Code

kg

10
15
20
25
32

10
10
10
10
10

71
185
350
700
1000

169 546 081
169 546 082
169 546 083
169 546 084
169 546 085

0.121
0.123
0.193
0.273
0.480

50 40
63 50
75 65
90 80
110 100

10
10
10
10
10

1600
3100
5000
7000
11000

169 546 086
169 546 087
169 546 088
169 546 089
169 546 090

0.665
1.205
4.200
6.100
9.400

d

[mm]

16
20
25
32
40
50
63
75
90
110

56

PN

D

[mm]

H

[mm]

50 79
50 79
58 88
68 94
84 113
97
124
166
200
238

H1

[mm]

27
27
30
36
44

119 51
141 64
224 85
235 105
245 123

H2

L

[mm] [mm]

L1

[mm]

12 92 87
12 95 87
12 110 108
12 123 108
15 146 140
15
15
15
15
22

157
183
233
254
301

140
165
270
270
320

L2

[mm]

56
56
65
71
85

L4

[mm]

25
25
25
25
45

89 45
101 45
136 70
141 70
164 120

L5

L6

[mm] [mm]

42
42
50
50
66

45
45
58
58
75

M

z

[mm]

M6
M6
M6
M6
M8

64
64
72
79
94

66 75 M8
78 87 M8
64 206 M8
64 206 M8
64 256 M12

95
107
144
151
174

Multifunctional handle 546 red (K11)
With ratchet settings lockable
Note:
To retrofit the ball valve 546 with the multifunctional handle a multifunction module is neccessary in the dimensions DN65-100
d-d

DN-DN

[mm]

[mm]

16 - 20
- 25
- 32
- 40
- 50

10 - 15
- 20
- 25
- 32
- 40

- 63
- 50
- 75
- 65
- 90
- 80
110 - 140 100 - 125

Code

kg

D

D1

[mm]

H

L1

[mm] [mm]

167 484 100
167 484 101
167 484 102
167 484 103
167 484 104

0.026
0.045
0.045
0.082
0.082

26
34
34
40
40

167 484 105
161 486 689
161 486 690
161 486 691

0.104 44
0.480 115
0.480 115
0.480 115

5
5
5
5
5

L5

[mm]

53
59
59
69
69

L6

[mm] [mm]

87
108
108
140
140

5 80 165
12 105 270
12 105 270
12 107 320

42
50
50
66
66

45
58
58
75
75

78 87
64 206
64 206
64 256

Handle extension 546 PVC-U inch BS/ASTM
Model:
• For Ball Valve Type 546
DN-DN
[mm]

10 - 15
20 - 25
32 - 40
50 -

Inch

3/8-1/2
3/4-1
1 1/4-1 1/2
2

Code

161 486 443
161 486 444
161 486 445
161 486 446

kg

0.032
0.037
0.047
0.058

H

H1

H2

H3

D

[mm] [mm] [mm] [mm] [mm]

41
50
65
84

52
62
76
87

29
32
34
37

36
39
44
48

26
36
40
44

57

3-Way ball valve type 543 ABS
Horizontal/L-port
With solvent cement sockets metric
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-C opened, see flow scheme
d

DN

[mm] [mm]

16
20
25
32
40
50
63
d

10
15
20
25
32
40
50
D

[mm] [mm]

16 50
20 50
25 58
32 68
40 84
50 97
63 124

58

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
L

[mm]

50
75
150
280
480
620
1230
L1

[mm]

EPDM
Code

kg

0.187
0.192
0.276
0.420
0.716
1.061
2.064

169 543 001
169 543 002
169 543 003
169 543 004
169 543 005
169 543 006
169 543 007

L2

[mm]

109 77 73
112 77 73
131 97 86
151 97 99
181 128 120
205 128 137
261 152 179

L3

L4

L5

L6

H

[mm] [mm] [mm] [mm] [mm]

36
36
43
50
60
69
89

25
25
25
25
45
45
45

32
32
39
39
54
54
66

45 57
45 57
58 67
58 73
74 90
74 97
87 116

H1

H2

[mm] [mm]

28
28
32
36
45
51
65

8
8
8
8
9
9
9

M

6
6
6
6
8
8
8

z

[mm]

81
81
94
107
130
143
185

z1

[mm]

40
40
47
54
65
72
92

3-Way ball valve type 543 ABS
Horizontal/L-port
With threaded sockets Rp
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-C opened, see flow scheme
Rp

DN

[inch] [mm]

10
15
20
25
32
40
50

3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2
Rp

D

[inch] [mm]

50
1∕2
50
3∕4
58
1 68
1 1∕4 84
1 1∕2 97
2 124
3∕8

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
L

[mm]

50
75
150
280
480
620
1230
L1

[mm]

EPDM
Code

kg

0.187
0.192
0.276
0.420
0.716
1.061
2.064

169 543 041
169 543 042
169 543 043
169 543 044
169 543 045
169 543 046
169 543 047

L2

[mm]

113 77 73
117 77 73
135 97 86
155 97 99
179 128 120
201 128 137
255 152 179

L3

L4

L5

L6

H

[mm] [mm] [mm] [mm] [mm]

36
36
43
50
60
69
89

25
25
25
25
45
45
45

32
32
39
39
54
54
66

45 57
45 57
58 67
58 73
74 90
74 97
87 116

H1

H2

[mm] [mm]

28
28
32
36
45
51
65

8
8
8
8
9
9
9

M

6
6
6
6
8
8
8

z

[mm]

87
85
100
113
134
155
199

z1

[mm]

43
42
50
57
67
78
99

59

3-Way ball valve type 543 ABS
Horizontal/L-port
With butt fusion spigots long
PE100 SDR11 metric
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-C opened, see flow scheme
d

DN

[mm] [mm]

20
25
32
40
50
63
d

15
20
25
32
40
50
D

[mm] [mm]

20 50
25 58
32 68
40 84
50 97
63 124

60

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
L

[mm]

75
150
280
480
620
1230
L1

[mm]

EPDM
Code

kg

0.203
0.296
0.450
0.762
1.161
2.509

169 543 302
169 543 303
169 543 304
169 543 305
169 543 306
169 543 307

L2

[mm]

210 77 73
237 97 86
251 97 99
283 128 120
319 128 137
399 152 179

L3

L4

L5

L6

H

[mm] [mm] [mm] [mm] [mm]

36
43
50
60
69
89

25
25
25
45
45
45

32
39
39
54
54
66

45 57
58 67
58 73
74 90
74 97
87 116

H1

H2

[mm] [mm]

28
32
36
45
51
65

8
8
8
9
9
9

M

6
6
6
8
8
8

e

[mm]

2.3
2.3
2.9
3.7
4.6
5.8

3-Way ball valve type 543 ABS
Horizontal/L-port
With solvent cement sockets BS
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-C opened, see flow scheme
Inch DN

[mm]

10
15
20
25
32
40
50

3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2
Inch D

[mm]

50
1∕2
50
3∕4
58
1 68
1 1∕4 84
1 1∕2 97
2 124
3∕8

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
L

[mm]

50
75
150
280
480
620
1230
L1

[mm]

EPDM
Code

kg

0.187
0.192
0.276
0.420
0.716
1.061
2.064

169 543 061
169 543 062
169 543 063
169 543 064
169 543 065
169 543 066
169 543 067

L2

[mm]

109 77 73
112 77 73
131 97 86
151 97 99
181 128 120
205 128 137
261 152 179

L3

L4

L5

L6

H

[mm] [mm] [mm] [mm] [mm]

36
36
43
50
60
69
89

25
25
25
25
45
45
45

32
32
39
39
54
54
66

45 57
45 57
58 67
58 73
74 90
74 97
87 116

H1

H2

[mm] [mm]

28
28
32
36
45
51
65

8
8
8
8
9
9
9

M

6
6
6
6
8
8
8

z

[mm]

77
77
90
103
124
145
189

z1

[mm]

38
38
45
52
62
73
94

61

3-Way ball valve type 543 ABS
Horizontal/T-port
With solvent cement sockets metric
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
d

DN

[mm] [mm]

16
20
25
32
40
50
63
d

10
15
20
25
32
40
50
D

[mm] [mm]

16 50
20 50
25 58
32 68
40 84
50 97
63 124

62

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
L

[mm]

140
200
470
793
1290
1910
3100
L1

[mm]

EPDM
Code

kg

0.186
0.191
0.274
0.415
0.708
1.045
2.030

169 543 201
169 543 202
169 543 203
169 543 204
169 543 205
169 543 206
169 543 207

L2

[mm]

109 77 73
112 77 73
131 97 86
151 97 99
181 128 120
205 128 137
261 152 179

L3

L4

L5

L6

H

[mm] [mm] [mm] [mm] [mm]

36
36
43
50
60
69
89

25
25
25
25
45
45
45

32
32
39
39
54
54
66

45 57
45 57
58 67
58 73
74 90
74 97
87 116

H1

H2

[mm] [mm]

28
28
32
36
45
51
65

8
8
8
8
9
9
9

M

6
6
6
6
8
8
8

z

[mm]

81
81
94
107
130
143
185

z1

[mm]

40
40
47
54
65
72
92

3-Way ball valve type 543 ABS
Horizontal/T-port
With threaded sockets Rp
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
Rp

DN

[inch] [mm]

10
15
20
25
32
40
50

3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2
Rp

D

[inch] [mm]

50
1∕2
50
3∕4
58
1 68
1 1∕4 84
1 1∕2 97
2 124
3∕8

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
L

[mm]

140
200
470
793
1290
1910
3100
L1

[mm]

EPDM
Code

kg

0.186
0.191
0.274
0.415
0.708
1.045
2.030

169 543 241
169 543 242
169 543 243
169 543 244
169 543 245
169 543 246
169 543 247

L2

[mm]

113 77 73
117 77 73
135 97 86
155 97 99
179 128 120
201 128 137
255 152 179

L3

L4

L5

L6

H

[mm] [mm] [mm] [mm] [mm]

36
36
43
50
60
69
89

25
25
25
25
45
45
45

32
32
39
39
54
54
66

45 57
45 57
58 67
58 73
74 90
74 97
87 116

H1

H2

[mm] [mm]

28
28
32
36
45
51
65

8
8
8
8
9
9
9

M

6
6
6
6
8
8
8

z

[mm]

87
85
100
113
134
155
199

z1

[mm]

43
42
50
57
67
78
99

63

3-Way ball valve type 543 ABS
Horizontal/T-port
With butt fusion spigots long
PE100 SDR11 metric
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
d

DN

[mm] [mm]

20
25
32
40
50
63
d

15
20
25
32
40
50
D

[mm] [mm]

20 50
25 58
32 68
40 84
50 97
63 124

64

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
L

[mm]

200
470
793
1290
1910
3100
L1

[mm]

EPDM
Code

kg

0.203
0.296
0.450
0.762
1.161
2.509

169 543 322
169 543 323
169 543 324
169 543 325
169 543 326
169 543 327

L2

[mm]

210 77 73
237 97 86
251 97 99
283 128 120
319 128 137
399 152 179

L3

L4

L5

L6

H

[mm] [mm] [mm] [mm] [mm]

36
43
50
60
69
89

25
25
25
45
45
45

32
39
39
54
54
66

45 57
58 67
58 73
74 90
74 97
87 116

H1

H2

[mm] [mm]

28
32
36
45
51
65

8
8
8
9
9
9

M

6
6
6
8
8
8

e

[mm]

2.3
2.3
2.9
3.7
4.6
5.8

3-Way ball valve type 543 ABS
Horizontal/T-port
With solvent cement sockets BS
Model:
• For easy installation and removal (valve end and union nut are compatible
with type 546)
• Ball seals PTFE
• Pneumatic or electric actuator available separately
• Angle of operation 360° without turn limiter
• Turn limiter 90° enclosed, in different positions usable as a clip-on ring
• Integrated stainless steel mounting inserts
• Delivery status A-B-C opened, see flow scheme
Inch DN

[mm]

10
15
20
25
32
40
50

3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2
Inch D

[mm]

50
1∕2
50
3∕4
58
1 68
1 1∕4 84
1 1∕2 97
2 124
3∕8

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
L

[mm]

140
200
470
793
1290
1910
3100
L1

[mm]

EPDM
Code

kg

0.186
0.191
0.274
0.415
0.708
1.045
2.030

169 543 261
169 543 262
169 543 263
169 543 264
169 543 265
169 543 266
169 543 267

L2

[mm]

109 77 73
112 77 73
131 97 86
151 97 99
181 128 120
205 128 137
261 152 179

L3

L4

L5

L6

H

[mm] [mm] [mm] [mm] [mm]

36
36
43
50
60
69
89

25
25
25
25
45
45
45

32
32
39
39
54
54
66

45 57
45 57
58 67
58 73
74 90
74 97
87 116

H1

H2

[mm] [mm]

28
28
32
36
45
51
65

8
8
8
8
9
9
9

M

6
6
6
6
8
8
8

z

[mm]

77
77
90
103
124
145
189

z1

[mm]

38
38
45
52
62
73
94

65

3-Way ball valve type 543 ABS
Vertical/L-port
With solvent cement sockets metric
Model:
•
•
•
•
•
•

Vertical inlet solvent cement spigot metric
Easy installation and removal using union on third outlet
Ball seals PTFE
Electric actuator available separately
Angle of operation 360° without turn limiter
Delivery status B-C opened, see flow scheme

Mode of action:
• For interconnection of two inputs
d

DN

[mm] [mm]

16
20
25
32
40
50
63
d

10
15
20
25
32
40
50
D

[mm] [mm]

16 50
20 50
25 58
32 68
40 84
50 97
63 124

66

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
L

[mm]

49
77
146
260
437
667
1293
L1

[mm]

EPDM
Code

kg

0.124
0.127
0.194
0.284
0.475
0.676
1.234

169 543 401
169 543 402
169 543 403
169 543 404
169 543 405
169 543 406
169 543 407

L2

[mm]

92 77 56
95 77 56
111 97 66
123 97 71
146 128 85
157 128 89
183 152 101

L3

L4

H

[mm] [mm] [mm]

32
32
39
39
54
54
66

H1

[mm]

z

[mm]

45 57 62 64
45 57 62 64
58 67 72 74
58 73 77 79
74 90 87 95
74 97 97 95
87 116 112 107

3-Way ball valve type 543 ABS
Vertical/L-port
With threaded sockets Rp
Model:
•
•
•
•
•
•

Vertical inlet solvent cement spigot metric
Easy installation and removal using union on third outlet
Ball seals PTFE
Electric actuator available separately
Angle of operation 360° without turn limiter
Delivery status B-C opened, see flow scheme

Mode of action:
• For interconnection of two inputs
Rp

DN

[inch] [mm]

10
15
20
25
32
40
50

3∕8
1∕2
3∕4

1
1 1∕4
1 1∕2
2
Rp

D

[inch] [mm]

50
1∕2
50
3∕4
58
1 68
1 1∕4 84
1 1∕2 97
2 124
3∕8

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
L

[mm]

49
77
146
260
437
667
1293
L1

[mm]

EPDM
Code

kg

0.124
0.127
0.194
0.284
0.475
0.676
1.234

169 543 421
169 543 422
169 543 423
169 543 424
169 543 425
169 543 426
169 543 427

L2

[mm]

96 77 56
99 77 56
115 97 66
127 97 71
144 128 85
153 128 89
177 152 101

L3

L4

H

[mm] [mm] [mm]

32
32
39
39
54
54
66

H1

[mm]

z

[mm]

45 57 62 69
45 57 62 67
58 67 72 78
58 73 77 85
74 90 87 100
74 97 97 106
87 116 112 121

67

Handle extension 546 and 543 PVC-U metric
Model:
• For ball valve type 546 and 543
• Composed of adapter sockets for handle connection and stem connection
• PVC-U pipe in suitable length has to be obtained on site
d-d

[mm]

DN-DN
[mm]

Code

16 - 20 10 - 15 161 486 435
25 - 32 20 - 25 161 486 436
40 - 50 32 - 40 161 486 437
- 63 - 50 161 486 438

kg

H

H1

H2

H3

0.032
0.037
0.047
0.058

41
50
65
84

52
62
76
87

29
32
34
37

36
39
44
48

Handle extension for ball valve type 546 PVC-U
DN65 - DN100
Model:
• Multiple use in succession possible
• Height variable
d-d

[mm]

DN-DN
[mm]

Code

75 - 90 65 - 80 161 490 920
- 110 - 100 161 490 921

68

kg

0.345
0.418

D

[mm] [mm] [mm] [mm] [mm]

D

H

[mm] [mm]

H1

[mm]

58 143 100
64 143 100

26
36
40
44

Mounting plate 546 and 543 PP-GF (L02)
• 2 mounting screws inclusive
d-d

[mm]

Inch

16 - 32
40 - 63
d-d

[mm]

16 - 32
40 - 63

DN-DN

[inch]

Code

[mm]

kg

3∕8 - 1 10 - 25 167 484 110
1 1∕4 - 2 32 - 50 167 484 111

B

D

H

H1

H2

L

L1

[mm] [mm] [mm] [mm] [mm] [mm]

48
54

8
9

20
20

14
14

0.055
0.086
L2

[mm]

[mm]

4 106 92 62
4 149 134 104

L3

L4

L5

[mm] [mm] [mm]

31
52

41
62

25
45

Multifunctional module (I03) PP-GF
With mechanical limit switches Ag Ni
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separately.
• Including Plug 3P+E / Protection: IP65
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
d-d

[mm]

Inch

DN-DN

[inch]

3∕8 - 1∕2
16 - 20
3∕4 - 1
25 - 32
40 - 50 1 1∕4 - 1 1∕2
- 63
2
75 - 90
2 1∕2 - 3
- 110
4

d-d

[mm]

H1

[mm]

Code

[mm]

H5

[mm]

10 - 15
20 - 25
32 - 40
- 50
65 - 80
- 100
L1

[mm]

16 - 20 27 50 87
25 - 32 30 53 108
40 - 50 44 72 140
- 63 64 94 165
75 - 90 85 157 270
- 110 123 175 320

kg

0.110
0.120
0.135
0.175
0.460
0.480

167 482 626
167 482 627
167 482 628
167 482 629
167 482 630
167 482 631

L5

L6

[mm] [mm]

42 45
50 58
66 75
78 87
64 206
64 256

L8

L9

[mm] [mm]

34
38
41
46

73
77
80
85

69

Multifunctional module (I02) PP-GF
Module empty
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separately.
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
• The multifunctional module from d75 - d110 has a master gauge F07 according to EN ISO 5211.
d-d

[mm]

Inch

DN-DN

[inch]

3∕8 - 1∕2
16 - 20
3∕4 - 1
25 - 32
40 - 50 1 1∕4 - 1 1∕2
- 63
2
75 - 90
2 1∕2 - 3
- 110
4

d-d

[mm]

B

[mm]

Code

[mm]

H1

[mm]

10 - 15
20 - 25
32 - 40
- 50
65 - 80
- 100
H5

[mm]

kg

H6

L

L1

[mm] [mm] [mm]

16 - 20 67 27 50
25 - 32 75 30 53
40 - 50 81 44 72
- 63 91 64 94
75 - 90 90 85 157
- 110 106 123 175

0.055
0.070
0.080
0.120
0.135
0.175

167 482 680
167 482 681
167 482 682
167 482 683
167 482 684
167 482 685

17
16
16
19
23
23

72
72
80
93
85
97

87
108
140
165
270
320

L2

L3

L5

L6

[mm] [mm] [mm] [mm]

54
52
60
68

40
46
50
65

42 45
50 58
66 75
78 87
64 206
64 256

L8

[mm]

34
38
41
46

Multifunctional module (I04) PP-GF
With mechanical limit switches Au
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separately.
• Including Plug 3P+E / Protection: IP65
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
d-d

[mm]

Inch

DN-DN

[inch]

3∕8 - 1∕2
16 - 20
3∕4 - 1
25 - 32
40 - 50 1 1∕4 - 1 1∕2
- 63
2
75 - 90
2 1∕2 - 3
- 110
4

d-d

[mm]

16 - 20
25 - 32
40 - 50

70

H1

[mm]

27
30
44

Code

[mm]

H5

[mm]

10 - 15
20 - 25
32 - 40
- 50
65 - 80
- 100
L1

[mm]

L6

[mm] [mm]

table continued next page

0.110
0.120
0.135
0.175
0.460
0.480

167 482 635
167 482 636
167 482 637
167 482 638
167 482 639
167 482 640

L5

50 87
53 108
72 140

kg

42
50
66

45
58
75

L8

L9

[mm] [mm]

34
38
41

73
77
80

d-d

[mm]

H1

[mm]

H5

[mm]

L1

[mm]

L5

L6

[mm] [mm]

- 63 64 94 165
75 - 90 85 157 270
- 110 123 175 320

78 87
64 206
64 256

L8

L9

[mm] [mm]

46

85

Multifunctional module (I05) PP-GF
With inductive limit switches Namur
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separately.
• Including Plug 3P+E / Protection: IP65
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
d-d

[mm]

Inch

DN-DN

[inch]

3∕8 - 1∕2
16 - 20
3∕4 - 1
25 - 32
40 - 50 1 1∕4 - 1 1∕2
- 63
2
75 - 90
2 1∕2 - 3
- 110
4

d-d

[mm]

H1

[mm]

Code

[mm]

H5

[mm]

10 - 15
20 - 25
32 - 40
- 50
65 - 80
- 100
L1

[mm]

16 - 20 27 50 87
25 - 32 30 53 108
40 - 50 44 72 140
- 63 64 94 165
75 - 90 85 157 270
- 110 123 175 320

kg

0.110
0.120
0.135
0.175
0.460
0.480

167 482 671
167 482 672
167 482 673
167 482 674
167 482 675
167 482 676

L5

L6

[mm] [mm]

42 45
50 58
66 75
78 87
64 206
64 256

L8

L9

[mm] [mm]

34
38
41
46

73
77
80
85

71

Multifunctional module (I06) PP-GF
With inductive limit switches PNP
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separately.
• Including Plug 3P+E / Protection: IP65
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
d-d

[mm]

Inch

DN-DN

[inch]

3∕8 - 1∕2
16 - 20
3∕4 - 1
25 - 32
40 - 50 1 1∕4 - 1 1∕2
- 63
2
75 - 90
2 1∕2 - 3
- 110
4

d-d

[mm]

H1

[mm]

Code

[mm]

H5

[mm]

10 - 15
20 - 25
32 - 40
- 50
65 - 80
- 100
L1

[mm]

0.110
0.120
0.135
0.175
0.460
0.480

167 482 662
167 482 663
167 482 664
167 482 665
167 482 666
167 482 667

L5

L6

[mm] [mm]

16 - 20 27 50 87
25 - 32 30 53 108
40 - 50 44 72 140
- 63 64 94 165
75 - 90 85 157 270
- 110 123 175 320

kg

42 45
50 58
66 75
78 87
64 206
64 256

L8

L9

[mm] [mm]

34
38
41
46

73
77
80
85

Multifunctional module (I07) PP-GF
With inductive limit switches NPN
Model:
• Accessory to Ball Valve Type 546
• Multifunctional module acts as an intermediate element for actuators
• For operation with handle, multifunctional handle has to be ordered separately.
• Including Plug 3P+E / Protection: IP65
• Including screws to mount the module and stainless steel coupling piece
(V2A) for dimension DN65-100
d-d

[mm]

Inch

DN-DN

[inch]

3∕8 - 1∕2
16 - 20
3∕4 - 1
25 - 32
40 - 50 1 1∕4 - 1 1∕2
- 63
2
75 - 90
2 1∕2 - 3
- 110
4

d-d

[mm]

16 - 20
25 - 32
40 - 50

72

H1

[mm]

27
30
44

Code

[mm]

H5

[mm]

10 - 15
20 - 25
32 - 40
- 50
65 - 80
- 100
L1

[mm]

L6

[mm] [mm]

table continued next page

0.110
0.120
0.135
0.175
0.460
0.480

167 482 653
167 482 654
167 482 655
167 482 656
167 482 657
167 482 658

L5

50 87
53 108
72 140

kg

42
50
66

45
58
75

L8

L9

[mm] [mm]

34
38
41

73
77
80

d-d

[mm]

H1

[mm]

H5

[mm]

L1

[mm]

- 63 64 94 165
75 - 90 85 157 270
- 110 123 175 320

L5

L6

[mm] [mm]

78 87
64 206
64 256

L8

L9

[mm] [mm]

46

85

73

Spare parts ball valves
Spare parts ball valve type 546

Central part
Model:
• Every connecting pieces and union nuts are listed on product range industry
valves
• Ball seals standard in PTFE
• Central part consisting of: body (1), union bush (2), ball (5), stem (6), ball-,
backing-, body-, face- and stem seal (7-11), standard lever (12) and threaded
inserts stainless steel (14)
d

[mm]

Inch DN

[mm]

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

ABS EPDM
Code

kg

10
15
20
25
32

169 480 751
169 480 751
169 480 752
169 480 753
169 480 754

0.075
0.075
0.120
0.175
0.310

50 1 1∕2 40
63
2 50
75 2 1∕2 65
90
3 80
110
4 100

169 480 755
169 480 756
169 480 757
169 480 758
169 480 759

0.405
0.700
2.660
3.780
5.990

Ball set
Model:
• Ball seals standard in PTFE
• Ball set consisting of: ball (5), stem (6), ball-, backing-, body- and stem seal
(7-9,11)
d

[mm]

74

Inch DN

[mm]

ABS EPDM
Code

kg

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

10
15
20
25
32

169 480 900
169 480 900
169 480 901
169 480 902
169 480 903

0.013
0.013
0.020
0.035
0.065

50 1 1∕2
63
2

40 169 480 904
50 169 480 905

0.100
0.195

table continued next page

d

[mm]

Inch DN

[mm]

ABS EPDM
Code

75 2 1∕2 65 169 480 906
90
3 80 169 480 907
110
4 100 169 480 908

kg

0.388
0.610
1.014

Lever
d

Standard lever
red
Code

Standard lever
black
Code

Multifunctional
lever
Code

10
15
20
25
32

167 484 088
167 484 088
167 484 089
167 484 090
167 484 091

167 484 076
167 484 076
167 484 077
167 484 078
167 484 079

167 484 100
167 484 100
167 484 101
167 484 102
167 484 103

0.026
0.026
0.045
0.045
0.082

50 1 1∕2 40
63
2 50
75 2 1∕2 65
90
3 80
110
4 100

167 484 092
167 484 093
167 484 094
167 484 095
167 484 096

167 484 080
167 484 081
167 484 082
167 484 083
167 484 084

167 484 104
167 484 105
161 486 689
161 486 690
161 486 691

0.082
0.104
0.480
0.480
0.480

[mm]

Inch DN

[mm]

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

kg

Face seal
Model:
• Face seal no. 10
d

[mm]

Inch DN

[mm]

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

EPDM
Code

kg

10
15
20
25
32

748 410 059
748 410 059
748 410 106
748 410 151
748 410 062

0.004
0.004
0.002
0.002
0.002

50 1 1∕2 40
63
2 50
75 2 1∕2 65
90
3 80
110
4 100

748 410 003
748 410 231
748 410 119
748 410 023
748 410 254

0.004
0.010
0.006
0.010
0.020

Seal set
Model:
• Seal set consisting of: backing-, body-, face- and stem seal (8-11)
d

[mm]

Inch DN

[mm]

EPDM
Code

kg

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

10
15
20
25
32

161 486 400
161 486 400
161 486 401
161 486 402
161 486 403

0.002
0.002
0.002
0.003
0.005

50 1 1∕2
63
2

40 161 486 404
50 161 486 405

0.012
0.016

table continued next page

75

d

[mm]

Inch DN

[mm]

EPDM
Code

kg

75 2 1∕2 65 161 486 406
90
3 80 161 486 407
110
4 100 161 486 408

0.018
0.024
0.039

Spare parts ball valve type 543 horizontal

Central part L-port
Model:
• Every connecting pieces and union nuts are listed on product range industry
valves
• Ball seals standard in PTFE
• Central part consisting of: body (1), union bush (2), ball (5), stem (6), ball-,
backing-, body-, face- and stem seal (7-11), standard lever (12) and threaded
inserts stainless steel (14)
d

[mm]

Inch DN

ABS EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

169 481 202
169 481 202
169 481 203
169 481 204
169 481 205
169 481 206
169 481 207

kg

0.120
0.120
0.177
0.267
0.471
0.699
1.340

Central part T-port
Model:
• Ball seals standard in PTFE
• Central part consisting of: body (1), union bush (2), ball (5), stem (6), ball-,
backing-, body-, face- and stem seal (7-11), standard lever (12) and threaded
inserts stainless steel (14)
d

[mm]

Inch DN

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

76

ABS EPDM

[mm] Code

10
15
20
25
32
40
50

169 481 212
169 481 212
169 481 213
169 481 214
169 481 215
169 481 216
169 481 217

kg

0.120
0.120
0.175
0.262
0.462
0.683
1.306

Ball set L-port
Model:
• Ball seals standard in PTFE
• Ball set consisting of: lever (12), ball (5), stem (6), ball-, backing-, body- and
stem seal (7-9,11)
d

[mm]

Inch DN

ABS EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

kg

0.026
0.026
0.049
0.066
0.114
0.170
0.282

169 481 282
169 481 282
169 481 283
169 481 284
169 481 285
169 481 286
169 481 287

Ball set T-port
Model:
• Ball seals standard in PTFE
• Ball set consisting of: lever (12), ball (5), stem (6), ball-, backing-, body- and
stem seal (7-9,11)
d

[mm]

Inch DN

ABS EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

kg

169 481 292
169 481 292
169 481 293
169 481 294
169 481 295
169 481 296
169 481 297

0.025
0.025
0.048
0.060
0.105
0.154
0.247

Lever
d

[mm]

Inch DN

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

d

[mm]

Standard lever LCode

Standard lever Lport black
Code

Standard lever Tport red
Code

167 484 488
167 484 488
167 484 489
167 484 490
167 484 491
167 484 492
167 484 493

167 484 376
167 484 376
167 484 377
167 484 378
167 484 379
167 484 380
167 484 381

167 484 588
167 484 588
167 484 589
167 484 590
167 484 591
167 484 592
167 484 593

Standard lever TCode

Multifunctionallever L-port red
Code

Multifunctionallever T-port red
Code

167 484 576
167 484 576
167 484 577
167 484 578
167 484 579
167 484 580
167 484 581

167 484 442
167 484 442
167 484 443
167 484 444
167 484 445
167 484 446
167 484 447

167 484 542
167 484 542
167 484 543
167 484 544
167 484 545
167 484 546
167 484 547

[mm] port red

10
15
20
25
32
40
50

Inch DN

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

[mm] port black

10
15
20
25
32
40
50

kg

0.026
0.026
0.045
0.045
0.082
0.082
0.104

77

Face seal
Model:
• Face seal no. 10
d

[mm]

Inch DN

EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

748 410 059
748 410 059
748 410 106
748 410 151
748 410 062
748 410 003
748 410 231

kg

0.004
0.004
0.002
0.002
0.002
0.004
0.010

Seal set
Model:
• Seal set consisting of: backing-, body-, face- and stem seal (8-11)
d

[mm]

Inch DN

EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

161 488 242
161 488 242
161 488 243
161 488 244
161 488 245
161 488 246
161 488 247

kg

0.011
0.011
0.011
0.014
0.014
0.026
0.032

Turn limiter 90°
d

[mm]

Inch DN

[mm]

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

Code

kg

167 482 479
167 482 479
167 482 480
167 482 480
167 482 481
167 482 481
167 482 482

0.001
0.001
0.002
0.002
0.004
0.004
0.004

Assembly kit
Model:
• Intermediate element for ball valve type 543 horizontal and electric or pneumatic actuators EA21; PA11/21
• Including screws and position indicator for actuators
d

[mm]

Inch

[inch]

DN

[mm]

Code

3∕8 - 1∕2
16 - 20
10 - 15 167 484 941
3∕4 - 1
25 - 32
20 - 25 167 484 942
40 - 50 1 1∕4 - 1 1∕2 32 - 40 167 484 943
63
2
50 167 484 944

78

kg

0.156
0.181
0.197
0.236

Spare parts ball valve type 543 vertical

Central part L-port
Model:
• Every connecting pieces and union nuts are listed on product range industry
valves
• Ball seals standard in PTFE
• Central part consisting of: body (1), union bush (2), ball (5), stem (6), ball-,
backing-, body-, face- and stem seal (7-11) and standard lever (12)
d

[mm]

Inch DN

ABS EPDM

[mm] Code

3∕8
16
3∕8
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

kg

0.079
0.079
0.129
0.181
0.311
0.435
0.751

169 481 221
169 481 222
169 481 223
169 481 224
169 481 225
169 481 226
169 481 227

Central part diverter ball
Model:
• Ball seals standard in PTFE
• Central part consisting of: body (1), union bush (2), ball (5), stem (6), ball-,
backing-, body-, face- and stem seal (7-11) and standard lever (12)
d

[mm]

Inch DN

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

ABS EPDM

[mm] Code

10
15
20
25
32
40
50

169 481 231
169 481 232
169 481 233
169 481 234
169 481 235
169 481 236
169 481 237

kg

0.079
0.079
0.127
0.176
0.303
0.419
0.717

79

Ball set L-port
Model:
• Ball seals standard in PTFE
• Ball set consisting of: lever (12), ball (5), stem (6), ball-, backing-, body- and
stem seal (7-9,11)
d

[mm]

Inch DN

ABS EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

kg

0.026
0.026
0.049
0.063
0.111
0.155
0.298

169 481 302
169 481 302
169 481 303
169 481 304
169 481 305
169 481 306
169 481 307

Ball set diverter ball
Model:
• Ball seals standard in PTFE
• Ball set consisting of: lever (12), ball (5), stem (6), ball-, backing-, body- and
stem seal (7-9,11)
d

[mm]

Inch DN

ABS EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

kg

169 481 312
169 481 312
169 481 313
169 481 314
169 481 315
169 481 316
169 481 317

0.020
0.020
0.037
0.041
0.070
0.083
0.122

Lever
d

[mm]

Inch DN

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

d

[mm]

10
15
20
25
32
40
50

Inch DN

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

80

Standard lever LCode

Standard lever di- Multifunctionalverter ball red
lever L-port red
Code
Code

167 484 688
167 484 688
167 484 689
167 484 690
167 484 691
167 484 692
167 484 693

167 484 788
167 484 788
167 484 789
167 484 790
167 484 791
167 484 792
167 484 793

Multifunctional-

kg

[mm] port red

[mm] lever diverter ball

red
Code

10
15
20
25
32
40
50

167 484 742
167 484 742
167 484 743
167 484 744
167 484 745
167 484 746
167 484 747

0.026
0.026
0.045
0.045
0.082
0.082
0.104

167 484 642
167 484 642
167 484 643
167 484 644
167 484 645
167 484 646
167 484 647

Face seal
Model:
• Face seal no. 10
d

[mm]

Inch DN

EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

748 410 059
748 410 059
748 410 106
748 410 151
748 410 062
748 410 003
748 410 231

kg

0.004
0.004
0.002
0.002
0.002
0.004
0.010

Seal set
Model:
• Seal set consisting of: backing-, body-, face- and stem seal (8-11)
d

[mm]

Inch DN

EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

161 486 400
161 486 400
161 486 401
161 486 402
161 486 403
161 486 404
161 486 405

kg

0.002
0.002
0.002
0.003
0.005
0.012
0.016

Assembly kit
Model:
• Intermediate element for ball valve type 543 vertical and electric or pneumatic
actuators EA21; PA11/21
• Including screws and position indicator for actuators
d

[mm]

Inch

[inch]

DN

[mm]

Code

3∕8 - 1∕2
16 - 20
10 - 15 167 484 945
3∕4 - 1
25 - 32
20 - 25 167 484 946
40 - 50 1 1∕4 - 1 1∕2 32 - 40 167 484 947
63
2
50 167 484 948

kg

0.156
0.181
0.197
0.236

81

Diaphragm valves
Diaphragm valve type 514 ABS
With solvent cement sockets BS
Model:
Double flow rate compared to predecessor
One housing nut replaces four screws
Handwheel with built-in locking mechanism
For easy installation and removal
Short overall length

•
•
•
•
•

Option:
• Individual configuration of the valve (see diagram)
• Self adjusting multifunctional module with integrated limit switches
Inch DN

[mm]

15
20
25
32
40
50

1∕2
3∕4

1
1 1∕4
1 1∕2
2
Inch D

[mm]

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
D2

125
271
481
759
1263
1728

[mm]

D3

[mm]

EPDM
Code

PTFE/EPDM
Code

169 514 512
169 514 513
169 514 514
169 514 515
169 514 516
169 514 517

169 514 532
169 514 533
169 514 534
169 514 535
169 514 536
169 514 537

L

[mm]

65 65 43
3∕4
80 65 51
1 88 87 58
1 1∕4 101 87 72
1 1∕2 117 135 83
2 144 135 100
1∕2

128
152
166
192
222
266

L2

H

[mm] [mm]

25
25
25
45
45
45

73
81
107
115
148
166

H1

H2

[mm] [mm]

14
18
22
26
32
39

12
12
12
15
15
15

M

M6
M6
M6
M8
M8
M8

kg

0.364
0.476
1.079
1.317
2.350
3.063
z

[mm]

Lift =
Hx
[mm]

96
114
122
140
160
190

7
10
13
15
19
25

Diaphragm valve type 514 ABS
With solvent cement sockets metric
Model:
•
•
•
•
•

Double flow rate compared to predecessor
One housing nut replaces four screws
Handwheel with built-in locking mechanism
For easy installation and removal
Short overall length

Option:
• Individual configuration of the valve (see diagram)
• Self adjusting multifunctional module with integrated limit switches
d

DN

[mm] [mm]

20
25
32
40
50
63
82

15
20
25
32
40
50

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10

125
271
481
759
1263
1728

EPDM
Code

PTFE/EPDM
Code

169 514 012
169 514 013
169 514 014
169 514 015
169 514 016
169 514 017

169 514 032
169 514 033
169 514 034
169 514 035
169 514 036
169 514 037

table continued next page

kg

0.364
0.478
1.081
1.357
2.374
3.111

d

D

[mm] [mm]

D2

[mm]

D3

[mm]

20 65 65 43
25 80 65 51
32 88 87 58
40 101 87 72
50 117 135 83
63 144 135 100

L

[mm]

L2

H

[mm] [mm]

128
152
166
192
222
266

25
25
25
45
45
45

73
81
107
115
148
166

H1

H2

M

[mm] [mm]

14
18
22
26
32
39

12
12
12
15
15
15

z

[mm]

M6
M6
M6
M8
M8
M8

Lift =
Hx
[mm]

96
114
122
140
160
190

7
10
13
15
19
25

Diaphragm valve type 515 ABS
With solvent cement spigots metric
Model:
•
•
•
•

Double flow rate compared to predecessor
One housing nut replaces four screws
Handwheel with built-in locking mechanism
Overall length EN 558

Option:
• Individual configuration of the valve (see diagram)
• Self adjusting multifunctional module with integrated limit switches
d

DN

[mm] [mm]

20
25
32
40
50
63
d

15
20
25
32
40
50
D

[mm] [mm]

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
D2

[mm]

125
271
481
759
1263
1728
L

[mm]

20 65 65 124
25 80 65 144
32 88 87 154
40 101 87 174
50 117 135 194
63 144 135 224

EPDM
Code

PTFE/EPDM
Code

169 515 012
169 515 013
169 515 014
169 515 015
169 515 016
169 515 017

169 515 032
169 515 033
169 515 034
169 515 035
169 515 036
169 515 037

L2

H

[mm] [mm]

25
25
25
45
45
45

73
81
107
115
148
166

H1

H2

[mm] [mm]

14
18
22
26
32
39

12
12
12
15
15
15

M

kg

0.318
0.412
0.992
1.164
2.141
2.726

Lift =
Hx
[mm]

M6
M6
M6
M8
M8
M8

7
10
13
15
19
25

83

Diaphragm valve type 317 ABS
With flanges metric
Model:
•
•
•
•
•

Overall length according to EN 558
Flat sealing faces
Other dimensions available on request
DN 80-150 with fixed flange
Minimum temperature: - 30°C

Option:
• Handwheel lockable DN15-65 (basic version not lockable)
* DN80 and DN150 fixed flanges metric and Inch ANSI B16.5
d

[mm]

DN

[mm]

PN

kv-value
(Δp=1 bar)
[l/min]

75 65 10
* 90 80 10
110 100 10
d

[mm]

D

[mm]

D1

[mm]

kg

992 169 317 423
1700 169 317 024
2700 169 317 025
D2

[mm]

75 185 145 152
* 90 200 160 270
110 225 180 270

84

EPDM
Code

D3

L

[mm] [mm]

18 290
18 310
18 350

L1

L2

[mm] [mm]

5.000
8.350
11.600
H

[mm]

70 201
35 120 265
35 120 304

H1

H2

[mm] [mm]

46
57
69

M

AL Lift =
Hx

15 M8 4
23 M12 8
23 M12 8

[mm]

30
40
50

Spare parts diaphragm valves new generation
Spare parts for hand-operated valves
Type 514/515/517/519

Bonnet complete
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

d

[mm]

Standard configu- For pressure tight Standard configuhousing PN10
ration PN16
Code
Code
Code

[mm] ration PN10

15
20
25
32
40
50

Inch DN

198 151 742
198 151 743
198 151 744
198 151 745
198 151 746
198 151 747

198 151 752
198 151 753
198 151 754
198 151 755
198 151 756
198 151 757

198 151 842
198 151 843
198 151 844
198 151 845
198 151 846
198 151 847

For pressure tight kg

[mm] housing PN16

Code

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

15
20
25
32
40
50

198 151 852
198 151 853
198 151 854
198 151 855
198 151 856
198 151 857

0.137
0.177
0.366
0.390
0.746
1.016

Hand wheel
Model:
• Without position indicator
DN

[mm]

Code

15 - 20 198 204 162
25 - 32 198 204 164
40 - 50 198 104 166

kg

0.035
0.068
0.190

85

Position indicator
d

[mm]

Inch DN

[mm]

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

15
20
25
32
40
50

Code

kg

0.011
0.011
0.013
0.012
0.014
0.015

167 484 992
167 484 993
167 484 994
167 484 995
167 484 996
167 484 997

Spindle assembly
Model:
• Incl. position indicator and compressor
DN-DN
[mm]

Code

kg

15 - 20 198 204 327
25 - 32 198 204 328
40 - 50 198 204 329

0.049
0.135
0.251

Seal set
Model:
• For manual valve - pressure tight housing
• Incl. position indicator
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

86

EPDM

[mm] Code

15
20
25
32
40
50

198 000 892
198 000 893
198 000 894
198 000 895
198 000 896
198 000 897

kg

0.004
0.004
0.007
0.006
0.008
0.009

Spare parts for automatic valves
Diastar Six/Ten/Sixteen

Actuators
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

d

[mm]

Diastar Six

Diastar Ten
Code

Diastar Sixteen
FC
Code

Diastar Ten FO
Code

198 151 762
198 151 763
198 151 764
198 151 765
198 151 766
198 151 767

198 151 772
198 151 773
198 151 774
198 151 775
198 151 776
198 151 777

198 151 782
198 151 783
198 151 784
198 151 785
198 151 786
198 151 787

198 151 792
198 151 793
198 151 794
198 151 795
198 151 796
198 151 797

[mm] Code

15
20
25
32
40
50

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

Diastar Ten DA kg

[mm] Code

15
20
25
32
40
50

198 151 802
198 151 803
198 151 804
198 151 805
198 151 806
198 151 807

0.427
0.718
0.823
1.269
2.141
2.364

Indicator cap
Size Code

1-2 198 806 639
3-5 198 806 640

kg

0.002
0.004

87

Compressor set
Model:
• Incl. diaphragm holder
d

[mm]

Inch

DN

[mm]

20
1/2
25
3/4
32
1
40 1 1/4
50 1 1/2
63
2

15
20
25
32
40
50

Code

kg

0.032
0.035
0.073
0.084
0.122
0.146

198 000 872
198 000 873
198 000 874
198 000 875
198 000 876
198 000 877

Seal set
Model:
• Spindle seal and piston seal
Size

Diastar Six/Ten/
Sixteen
Code

Only for Diastar
Six DN40/DN50
Code

Gr. 1
Gr. 2
Gr. 3
Gr. 4
Gr. 5

198 000 881
198 000 882
198 000 883
198 000 884
198 000 885

198 000 886
-

kg

0.006
0.008
0.006
0.010
0.072

Spare parts diaphragm
For type 514/515/517/519
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

d

[mm]

15
20
25
32
40
50

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

88

NBR

EPDM
Code

FPM
Code

PTFE/EPDM
Code

745 500 012
745 500 013
745 500 014
745 500 015
745 500 016
745 500 017

748 500 012
748 500 013
748 500 014
748 500 015
748 500 016
748 500 017

749 500 012
749 500 013
749 500 014
749 500 015
749 500 016
749 500 017

747 502 012
747 502 013
747 502 014
747 502 015
747 502 016
747 502 017

[mm] Code

PTFE/EPDM HP PTFE/FPM
Code

[mm] Code

15
20
25
32
40
50

747 502 032
747 502 033
747 502 034
747 502 035
747 502 036
747 502 037

747 503 012
747 503 013
747 503 014
747 503 015
747 503 016
747 503 017

kg

0.013
0.021
0.031
0.045
0.069
0.118

Spare parts for valve body type 514
Valve body with true union
Model:
• Without connection parts
d

[mm]

Inch DN

ABS

[mm] Code

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

15
20
25
32
40
50

169 481 322
169 481 323
169 481 324
169 481 325
169 481 326
169 481 327

kg

0.086
0.137
0.181
0.295
0.435
0.782

Union nut
d

[mm]

Inch DN

ABS

[mm] Code

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

15
20
25
32
40
50

729 690 406
729 690 407
729 690 408
729 690 409
729 690 410
729 690 411

kg

0.014
0.018
0.024
0.049
0.070
0.101

O-ring
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

EPDM

FPM
Code

748 410 006
748 410 007
748 410 008
748 410 009
748 410 010
748 410 011

749 410 006
749 410 007
749 410 008
749 410 009
749 410 010
749 410 011

[mm] Code

15
20
25
32
40
50

kg

0.002
0.002
0.002
0.006
0.007
0.010

89

Spare parts for valve body type 515
Valve body with spigot ends
d

[mm]

Inch DN

ABS solvent ce-

kg

[mm] ment spigot

Code

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

15
20
25
32
40
50

0.089
0.140
0.187
0.287
0.455
0.793

169 481 862
169 481 863
169 481 864
169 481 865
169 481 866
169 481 867

Spare parts for valve body type 517
Flange adaptor flat
d

[mm]

Inch DN

ABS metric

[mm] Code

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

15
20
25
32
40
50

729 790 106
729 790 107
729 790 108
729 790 109
729 790 110
729 790 111

kg

0.008
0.012
0.020
0.058
0.058
0.074

Flange
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

90

PVC-U metric

[mm] Code

15
20
25
32
40
50

721 700 006
721 700 007
721 700 008
721 700 009
721 700 010
721 700 011

table continued next page

LVI PVC-U ASTM
Code

721 702 206
721 702 207
721 702 208
721 702 209
721 702 210
721 702 211

LVI

d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

d

[mm]

PP-V metric

[mm] Code

15
20
25
32
40
50

Inch DN

727 700 406
727 700 407
727 700 408
727 700 409
727 700 410
727 700 411
PP-ST ASTM

[mm] Code

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

15
20
25
32
40
50

LVI

PP-V ASTM
Code

183 38 09
183 38 10
183 38 11
183 38 12
183 38 13
183 38 14

727 701 406
727 701 407
727 701 408
727 701 409
727 701 410
727 701 411

LVI PP-ST metric
Code

LVI

727 700 206
727 700 207
727 700 208
727 700 209
727 700 210
727 700 211

LVI kg

0.210
0.250
0.420
0.670
0.860
0.930

727 701 206
727 701 207
727 701 208
727 701 209
727 701 210
727 701 211

Flat gasket
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

EPDM

[mm] Code

15
20
25
32
40
50

748 400 006
748 400 007
748 400 008
748 400 009
748 400 010
748 400 011

kg

0.003
0.004
0.002
0.003
0.004
0.006

91

Spare parts diaphragm valves
Spare parts diaphragm valve type 317

Bonnet complete
Model:
• Without diaphragm (1, 3)
d

[mm]

Inch DN

[mm]

elastomer diaphragm
Code

75 2 1∕2 65 161 484 631
90
3 80 161 482 514
110
4 100 161 482 515

PTFE diaphragm kg
Code

161 484 638
161 482 516
161 482 517

1.526
3.967
5.700

Diaphragm (2)
d

[mm]

Inch DN

[mm]

NBR
Code

EPDM
Code

FPM
Code

PTFE/EPDM
Code

75 2 1∕2 65 161 480 231 161 481 028 161 481 098 161 480 240
90
3 80 161 480 232 161 481 029 161 481 099 161 480 241
110
4 100 161 480 233 161 481 030 161 481 100 161 480 242
d

[mm]

Inch DN

[mm]

PTFE/FPM
Code

PTFE/EPDM HP CSM
Code
Code

75 2 1∕2 65 161 481 932 161 484 458
90
3 80 161 484 459
110
4 100 161 484 460

161 480 237
161 480 238
161 480 239

Pressure spindel (3)
d

[mm]

Inch DN

[mm]

elastomer diaphragm
Code

75 2 1∕2 65 161 484 694
90
3 80 161 483 008
110
4 100 161 483 009

92

PTFE diaphragm kg
Code

161 484 702
161 483 020
161 483 021

0.134
0.335
0.495

kg

0.230
0.300
0.450

Fastening set (4)
Model:
• * with support plate
d

Inch DN

[mm]

[mm]

for PVC-U PVC-C
ABS
Code

kg

75 2 1∕2 65 161 483 032
90
3 80 161 483 033
110
4 100 161 483 034

0.679
0.845
1.440

Valve body with backing/fixed flange (5)
Inch d

[mm]

DN

[mm]

ABS ANSI
Code

3 90 80 169 480 282
4 110 100 169 480 283

kg

3.210
4.900

O-ring seal (6)
d

[mm]

90
110

Inch DN

[mm]

NBR
Code

3 80 745 410 107
4 100 745 410 107

kg

0.007
0.007

Indicator cap (7)
d

[mm]

90
110

Inch DN

[mm]

PVC-U SAN
Code

3 80 161 481 759
4 100 161 481 760

kg

0.032
0.035

93

Butterfly valves
Butterfly valve type 567 ABS
Bare shaft
Model:
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
• Overall length according to EN 558, ISO 5752
• Interface F07 according to DIN/ISO 5211
d

[mm]

63
75
90
110
140
160
225
d

[mm]

63
75
90
110
140
160
225
d

[mm]

DN

[mm]

50
65
80
100
125
150
200
D

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
D1

[mm] min.
[mm]

19
19
19
19
23
24
23
Q1

[mm]

120.0
139.7
150.0
175.0
210.0
241.3
290.0
Q2

[mm]

63 40
75 54 35
90 67 50
110 88 74
140 113 97
160 139 123
225 178 169

94

EPDM
Code

1470
2200
3000
6500
11500
16600
39600
D1
max.
[mm]

125.0
145.0
160.0
190.5
215.9
241.3
295.0

kg

0.763
0.859
0.999
1.535
2.018
2.858
4.129

169 567 802
169 567 803
169 567 804
169 567 805
169 567 806
169 567 807
169 567 808

d2

[mm]

104
115
131
161
187
215
267

D3

D4

H

[mm] [mm] [mm]

70
70
70
70
70
70
70

90
90
90
90
90
90
90

222
235
247
287
313
335
387

H1

[mm]

77
83
89
104
117
130
158

H2

[mm]

134
140
146
167
181
189
210

H3

H4

H5

L

[mm] [mm] [mm] [mm]

27
27
27
16
16
19
19

23
23
23
23
23
23
23

11
11
11
14
14
17
17

45
46
49
56
64
72
73

Lugstyle butterfly valve type 568 ABS
Bare shaft
Model:
Outer body in GGG-40.3 epoxy-coated
Connecting dimension: ISO 7005 PN10, EN 1092 PN10, DIN 2501 PN10
Overall length according to EN 558, ISO 5752
Interface F07 according to DIN/ISO 5211

•
•
•
•
d

[mm]

63
75
90
110
140
160
225
d

[mm]

63
75
90
110
140
160
225

DN

[mm]

50
65
80
100
125
150
200
d2

[mm]

150
170
184
216
246
273
334

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
D

M16
M16
M16
M16
M16
M20
M20

1470
2200
3000
6500
11500
16600
39600
D1

[mm]

125
145
160
180
210
240
295

EPDM
Code

kg

2.853
3.200
4.217
5.633
7.502
9.341
14.105

169 568 802
169 568 803
169 568 804
169 568 805
169 568 806
169 568 807
169 568 808

D3

D4

H

[mm] [mm] [mm]

70
70
70
70
70
70
70

90
90
90
90
90
90
90

222
235
247
287
313
335
387

H1

[mm]

77
83
89
104
117
130
158

H2

[mm]

134
140
146
167
181
189
210

H3

H4

L

Q1

[mm] [mm] [mm] [mm]

27
27
27
16
16
19
19

23
23
23
23
23
23
23

Q2

[mm]

45 40
46 54 35
49 67 50
56 88 74
64 113 97
72 139 123
73 178 169

95

Lugstyle butterfly valve type 568 ABS
Bare shaft
Model:
•
•
•
•

Outer body in GGG-40.3 epoxy-coated
Connecting dimension ANSI/ASME B 16.5 Class 150
Overall length according to EN 558, ISO 5752
Interface F07 according to DIN/ISO 5211

Inch d

[mm]

2

2 1∕2
3
4
5
6
8

63
75
90
110
140
160
225

Inch d2

[mm]

2
2 1∕2
3
4
5
6
8

150
170
177
216
246
273
334

Inch Q2

[mm]

2

2 1∕2 35
3 50
4 74
5 97
6 123
8 169

96

DN

[mm]

50
65
80
100
125
150
200

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10

D

UNC 5/8
UNC 5/8
UNC 5/8
UNC 5/8
UNC 3/4
UNC 3/4
UNC 3/4

1470
2200
3000
6500
11500
16600
39600
D1

[mm]

121
138
152
191
216
241
298

D3

EPDM
Code

kg

169 568 902
169 568 903
169 568 904
169 568 905
169 568 906
169 568 907
169 568 908
D4

H

[mm] [mm] [mm]

70
70
70
70
70
70
70

90
90
90
90
90
90
90

222
235
247
287
313
335
387

H1

[mm]

77
83
89
104
117
130
158

2.853
3.200
3.588
5.633
7.502
9.341
14.105
H2

[mm]

134
140
146
167
181
189
210

H3

H4

L

Q1

[mm] [mm] [mm] [mm]

27
27
27
16
16
19
19

23
23
23
23
23
23
23

45 40
46 54
49 67
56 88
64 113
72 139
73 178

Butterfly valve type 567 ABS
Hand lever with ratchet settings
Model:
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
• Overall length according to EN 558, ISO 5752
d

[mm]

63
75
90
110
140
160
225
d

[mm]

63
75
90
110
140
160
225

DN

[mm]

50
65
80
100
125
150
200
D

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
D1

[mm] min.
[mm]

19
19
19
19
23
24
23

EPDM
Code

120.0
139.7
150.0
175.0
210.0
241.3
290.0

1470
2200
3000
6500
11500
16600
39600
D1
max.
[mm]

125.0
145.0
160.0
190.5
215.9
241.3
295.0

kg

169 567 002
169 567 003
169 567 004
169 567 005
169 567 006
169 567 007
169 567 008

d2

[mm]

104
115
131
161
187
215
267

H

[mm]

264
277
289
325
352
373
435

H1

[mm]

77
83
89
104
117
130
158

1.400
1.150
1.221
1.805
2.536
3.128
4.936
H2

[mm]

134
140
146
167
181
189
210

H3

L

L1

[mm] [mm] [mm]

54
54
54
55
55
55
67

45
46
49
56
64
72
73

106
106
106
106
106
106
140

L2

[mm]

Q1

[mm]

Q2

[mm]

205 40
205 54 35
205 67 50
255 88 74
255 113 97
255 139 123
408 178 169

97

Butterfly valve type 567 ABS
Reduction gear with handwheel
Model:
• Connecting dimension: ISO 7005 PN 10, EN 1092 PN 10, DIN 2501 PN 10,
ANSI/ASME B 16.5 Class 150, BS 1560: 1989, BS 4504, JIS B 2220
• Overall length according to EN 558, ISO 5752
d

[mm]

63
75
90
110
140
160
225
d

[mm]

63
75
90
110
140
160
225
d

[mm]

63
75
90
110
140
160
225

98

DN

[mm]

50
65
80
100
125
150
200
D

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
D1

[mm] min.
[mm]

19
19
19
19
23
24
23
L3

[mm]

EPDM
Code

120.0
139.7
150.0
175.0
210.0
241.3
290.0
Q1

[mm]

1470
2200
3000
6500
11500
16600
39600
D1
max.
[mm]

125.0
145.0
160.0
190.5
215.9
241.3
295.0
Q2

[mm]

155 40
155 54 35
155 67 50
155 88 74
155 113 97
155 139 123
155 178 169

kg

169 567 022
169 567 023
169 567 024
169 567 025
169 567 026
169 567 027
169 567 028

d2

[mm]

104
115
131
160
187
215
267

D3

[mm]

150
150
150
150
150
150
150

H

[mm]

278
291
303
339
365
387
436

3.078
3.201
3.259
3.795
4.526
5.118
6.389
H1

[mm]

77
83
89
104
117
130
158

H2

[mm]

134
140
146
167
181
189
210

H3

L

L1

[mm] [mm] [mm]

50
50
50
50
50
50
50

45
46
49
56
64
72
73

110
110
110
110
110
110
110

L2

[mm]

120
120
120
120
120
120
120

Lugstyle butterfly valve type 568 ABS
Hand lever with ratchet settings
Model:
• Outer body in GGG-40.3 epoxy-coated
• Connecting dimension ANSI/ASME B 16.5 Class 150
• Overall length according to EN 558, ISO 5752
Inch d

[mm]

2

2 1∕2
3
4
5
6
8

63
75
90
110
140
160
225

Inch d2

[mm]

2 150
2 1∕2 170
3 177
4 216
5 246
6 273
8 334

DN

[mm]

50
65
80
100
125
150
200

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10

D

UNC 5/8
UNC 5/8
UNC 5/8
UNC 5/8
UNC 3/4
UNC 3/4
UNC 3/4

1470
2200
3000
6500
11500
16600
39600
D1

[mm]

121
138
152
191
216
241
298

H

[mm]

265
277
289
326
353
374
435

EPDM
Code

kg

3.075
3.422
3.810
5.903
7.772
9.611
14.912

169 568 102
169 568 103
169 568 104
169 568 105
169 568 106
169 568 107
169 568 108
H1

[mm]

77
83
89
104
117
130
158

H2

[mm]

134
140
146
167
181
189
210

H3

L

L1

[mm] [mm] [mm]

54
54
54
55
55
55
67

45
46
49
56
64
72
73

106
106
106
106
106
106
140

L2

[mm]

205
205
205
255
255
255
408

L3

[mm]

Q1

[mm]

150 40
160 54
175 67
244 88
272 113
297 139
360 178

Inch Q2

[mm]

2

2 1∕2 35
3 50
4 74
5 97
6 123
8 169

99

Lugstyle butterfly valve type 568 ABS
Reduction gear with handwheel
Model:
• Outer body in GGG-40.3 epoxy-coated
• Connecting dimension ANSI/ASME B 16.5 Class 150
• Overall length according to EN 558, ISO 5752
Inch d

[mm]

2

2 1∕2
3
4
5
6
8

63
75
90
110
140
160
225

Inch d2

[mm]

2 150
2 1∕2 170
3 177
4 216
5 246
6 273
8 334
Inch L4

[mm]

DN

[mm]

50
65
80
100
125
150
200

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10

D

1470
2200
3000
6500
11500
16600
39600
D1

[mm]

UNC 5/8
UNC 5/8
UNC 5/8
UNC 5/8
UNC 3/4
UNC 3/4
UNC 3/4
Q1

[mm]

Q2

[mm]

2 150 40
2 1∕2 160 54 35
3 175 67 50
4 244 88 74
5 272 113 97
6 297 139 123
8 360 178 169

100

121
138
152
191
216
241
298

D3

[mm]

150
150
150
150
150
150
150

EPDM
Code

kg

5.113
5.460
5.848
7.893
9.762
11.601
16.365

169 568 122
169 568 123
169 568 124
169 568 125
169 568 126
169 568 127
169 568 128
H

[mm]

279
291
303
339
366
387
436

H1

[mm]

77
83
89
104
117
130
158

H2

[mm]

134
140
146
167
181
189
210

H3

L

L1

[mm] [mm] [mm]

50
50
50
50
50
50
50

45
46
49
56
64
72
73

110
110
110
110
110
110
110

L2

[mm]

120
120
120
120
120
120
120

L3

[mm]

155
155
155
155
155
155
155

Lugstyle butterfly valve type 568 ABS
Hand lever with ratchet settings
Model:
• Outer body in GGG-40.3 epoxy-coated
• Connecting dimension: ISO 7005 PN10, EN 1092 PN10, DIN 2501 PN10
• Overall length according to EN 558, ISO 5752
d

[mm]

63
75
90
110
140
160
225
d

[mm]

63
75
90
110
140
160
225

DN

[mm]

50
65
80
100
125
150
200
d2

[mm]

150
170
184
216
246
273
334

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
D

M16
M16
M16
M16
M16
M20
M20

1470
2200
3000
6500
11500
16600
39600
D1

[mm]

125
145
160
180
210
240
295

EPDM
Code

kg

3.075
3.422
4.439
5.903
7.772
9.611
14.912

169 568 002
169 568 003
169 568 004
169 568 005
169 568 006
169 568 007
169 568 008

H

[mm]

265
277
289
326
353
374
435

H1

[mm]

77
83
89
104
117
130
158

H2

[mm]

134
140
146
167
181
189
210

H3

L

L1

[mm] [mm] [mm]

54
54
54
55
55
55
67

45
46
49
56
64
72
73

106
106
106
106
106
106
140

L2

[mm]

205
205
205
255
255
255
408

L3

[mm]

Q1

[mm]

Q2

[mm]

150 40
160 54 35
205 67 50
244 88 74
272 113 97
297 139 123
360 178 169

101

Lugstyle butterfly valve type 568 ABS
Reduction gear with handwheel
Model:
• Outer body in GGG-40.3 epoxy-coated
• Connecting dimension: ISO 7005 PN10, EN 1092 PN10, DIN 2501 PN10
• Overall length according to EN 558, ISO 5752
d

[mm]

63
75
90
110
140
160
225
d

[mm]

63
75
90
110
140
160
225
d

[mm]

DN

[mm]

50
65
80
100
125
150
200
d2

[mm]

150
170
184
216
246
273
334
Q1

[mm]

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10
D

M16
M16
M16
M16
M16
M20
M20
Q2

[mm]

63 40
75 54 35
90 67 50
110 88 74
140 113 97
160 139 123
225 178 169

102

1470
2200
3000
6500
11500
16600
39600
D1

[mm]

125
145
160
180
210
240
295

EPDM
Code

kg

5.113
5.460
6.477
7.893
9.762
11.601
16.365

169 568 022
169 568 023
169 568 024
169 568 025
169 568 026
169 568 027
169 568 028

D3

[mm]

150
150
150
150
150
150
150

H

[mm]

279
291
303
339
366
387
436

H1

[mm]

77
83
89
104
117
130
158

H2

[mm]

134
140
146
167
181
189
210

H3

L

L1

[mm] [mm] [mm]

50
50
50
50
50
50
50

45
46
49
56
64
72
73

110
110
110
110
110
110
110

L2

[mm]

120
120
120
120
120
120
120

L3

[mm]

155
155
155
155
155
155
155

L4

[mm]

150
160
205
244
272
297
360

Metal - butterfly valve type 037M
With hand lever
Model:
• Housing: Aluminium ASTM S 12A, Rilsan® coated
• Seatliner available in EPDM and FPM
d

[mm]

DN

[mm]

Inch PN

kv-value
(Δp=1 bar)
[l/min]

63 50
2 10
75 65 2 1∕2 10
90 80
3 10
110 100
4 10
140 125
5 10
160
225
280
315
d

[mm]

150
200
250
300
DN

[mm]

6
8
10
12

10
10
10
10

Inch PN

d

[mm]

150
200
250
300

220
320
500
800
1300

199 037 000
199 037 001
199 037 002
199 037 003
199 037 004

199 037 013
199 037 014
199 037 015
199 037 016
199 037 017

27130
47130
77110
114240

1900
3330
5400
8000

199 037 005
199 037 006
199 037 007
199 037 008

199 037 018
199 037 019
199 037 020
199 037 021

Cv value Disc: stainless
(Δp=1 psi) steel EPDM
[gal (US) / Code

Disc: stainless
steel FPM
Code

kv-value
(Δp=1 bar)
[l/min]

DN

[mm]

6
8
10
12

10
10
10
10

Inch PN

d

[mm]

150
200
250
300
DN

[mm]

min]

3140
4570
7140
11710
18570

220
320
500
800
1300

199 037 200
199 037 201
199 037 202
199 037 203
199 037 204

199 037 213
199 037 214
199 037 215
199 037 216
199 037 217

27130
47130
77110
114240

1900
3330
5400
8000

199 037 205
199 037 206
199 037 207
199 037 208

199 037 218
199 037 219
199 037 220
199 037 221

kv-value
(Δp=1 bar)
[l/min]

63 50
2 10
75 65 2 1∕2 10
90 80
3 10
110 100
4 10
140 125
5 10
160
225
280
315

6
8
10
12
d3

[mm]

10
10
10
10
L

Disc: ductile iron/
Rilsan® coated
FPM
Code

3140
4570
7140
11710
18570

63 50
2 10
75 65 2 1∕2 10
90 80
3 10
110 100
4 10
140 125
5 10
160
225
280
315

Cv value Disc: ductile iron/
(Δp=1 psi) Rilsan® coated
[gal (US) / EPDM
min]
Code

Cv value Disc: Alu-bronze
(Δp=1 psi) EPDM
[gal (US) / Code
min]

Disc: Alu-bronze
FPM
Code

3140
4570
7140
11710
18570

220
320
500
800
1300

199 037 400
199 037 401
199 037 402
199 037 403
199 037 404

199 037 413
199 037 414
199 037 415
199 037 416
199 037 417

27130
47130
77110
114240

1900
3330
5400
8000

199 037 405
199 037 406
199 037 407
199 037 408

199 037 418
199 037 419
199 037 420
199 037 421

L1

L2

[mm] [mm] [mm]

[mm]

H1

[mm]

290 53
312 63
327 71
360 87
388 102

H2

[mm]

H3

[mm]

63 50 95
75 65 114
90 80 131
110 100 152
140 125 182

43
46
46
52
56

45
45
45
45
45

140
152
159
178
191

95
95
95
95
95

160 150 209

56

45 320 416 118 203

95

table continued next page

220
220
220
220
320

H

103

d

[mm]

DN

[mm]

d3

[mm]

225 200 262
280 250 331
315 300 380

L

L1

L2

[mm] [mm] [mm]

60
68
78

H

[mm]

H1

[mm]

H2

[mm]

45 320 489 149 245
63 560 525 200 275
63 560 592 227 315

H3

[mm]

95
50
50

Metal - butterfly valve type 038M
With hand lever
Model:
• Seatliner available in EPDM and FPM
• Housing: ductile iron GGG-40/ASTM A536, Rilsan® coated
• Available in ANSI standard upon request
• In case this valve is used at the end of the line, the following pressures must
not be exceeded: DN50 to DN150 5,6bar and >DN200 3,5bar
d

[mm]

DN

[mm]

Inch PN

[l/min]

63 50
2 10
75 65 2 1∕2 10
90 80
3 10
110 100
4 10
140 125
5 10
160
225
280
315
d

[mm]

150
200
250
300
DN

[mm]

6
8
10
12

10
10
10
10

Inch PN

d

[mm]

63
75
90
104

150
200
250
300
DN

[mm]

6
8
10
12

10
10
10
10

Inch PN

50
2 10
65 2 1∕2 10
80
3 10

Cv value Disc: ductile iron/
(Δp=1 psi) Rilsan® coated
[gal (US) / EPDM
min]
Code

Disc: ductile iron/
Rilsan® coated
FPM
Code

3140
4570
7140
11710
18570

220
320
500
820
1300

199 038 000
199 038 001
199 038 002
199 038 003
199 038 004

199 038 013
199 038 014
199 038 015
199 038 016
199 038 017

27130
47130
77110
114240

1900
3330
5400
8000

199 038 005
199 038 006
199 038 007
199 038 008

199 038 018
199 038 019
199 038 020
199 038 021

Cv value Disc: stainless
(Δp=1 psi) steel EPDM
[gal (US) / Code

Disc: stainless
steel FPM
Code

kv-value
(Δp=1 bar)
[l/min]

63 50
2 10
75 65 2 1∕2 10
90 80
3 10
110 100
4 10
140 125
5 10
160
225
280
315

kv-value
(Δp=1 bar)

min]

3140
4570
7140
11710
18570

220
320
500
820
1300

199 038 200
199 038 201
199 038 202
199 038 203
199 038 204

199 038 213
199 038 214
199 038 215
199 038 216
199 038 217

27130
47130
77110
114240

1900
3330
5400
8000

199 038 205
199 038 206
199 038 207
199 038 208

199 038 218
199 038 219
199 038 220
199 038 221

kv-value
(Δp=1 bar)
[l/min]

Cv value Disc: Alu-bronze
(Δp=1 psi) EPDM
[gal (US) / Code
min]

3140
4570
7140

table continued next page

220 199 038 400
320 199 038 401
500 199 038 402

d

[mm]

DN

[mm]

Inch PN

[l/min]

110 100
140 125
160
225
280
315
d

[mm]

4 10
5 10

150
200
250
300
DN

[mm]

kv-value
(Δp=1 bar)

6
8
10
12

kv-value
(Δp=1 bar)
[l/min]

d

[mm]

150
200
250
300
d3

[mm]

6
8
10
12
L

10
10
10
10
L1

820 199 038 403
1300 199 038 404

27130
47130
77110
114240

63 50
2 10
75 65 2 1∕2 10
90 80
3 10
110 100
4 10
140 125
5 10
160
225
280
315

min]

11710
18570

10
10
10
10

Inch PN

Cv value Disc: Alu-bronze
(Δp=1 psi) EPDM
[gal (US) / Code

1900
3330
5400
8000

199 038 405
199 038 406
199 038 407
199 038 408

Cv value Disc: Alu-bronze
(Δp=1 psi) FPM
[gal (US) / Code

kg

min]

3140
4570
7140
11710
18570

220
320
500
820
1300

199 038 413
199 038 414
199 038 415
199 038 416
199 038 417

3.800
4.900
5.400
9.100
11.000

27130
47130
77110
114240

1900
3330
5400
8000

199 038 418
199 038 419
199 038 420
199 038 421

12.800
19.300
35.000
49.000

L2

[mm] [mm] [mm]

H

[mm]

H1

[mm]

H2

H3

[mm] [mm]

63
75
90
110
140

95
114
131
152
182

43
46
46
52
56

45
45
45
45
45

220
220
220
220
320

298 63
320 73
335 81
370 97
398 112

95
95
95
95
95

152
178
200
229
254

160
225
280
315

209
262
331
380

56
60
68
78

45
45
63
63

320
320
560
560

420
489
573
651

95
95
95
95

280
343
406
483

122
149
203
241

105

Metal - butterfly valve type 038G
Reduction gear with handwheel
Model:
• Seatliner available in EPDM and FPM
• Housing: ductile iron GGG-40/ASTM A536, Rilsan® coated
• Available in ANSI standard upon request
• In case this valve is used at the end of the line, the following pressures must
not be exceeded: DN50 to DN150 5,6bar and >DN200 3,5bar
d

[mm]

DN

[mm]

Inch PN

[l/min]

63 50
2 10
75 65 2 1∕2 10
90 80
3 10
110 100
4 10
140 125
5 10
160
225
280
315
d

[mm]

150
200
250
300
DN

[mm]

6
8
10
12

10
10
10
10

Inch PN

d

[mm]

150
200
250
300
DN

[mm]

6
8
10
12

10
10
10
10

Inch PN

160
225
280
315
d

[mm]

63
75
90
106

150
200
250
300
DN

[mm]

6
8
10
12

10
10
10
10

Inch PN

50
2 10
65 2 1∕2 10
80
3 10

Disc: ductile iron/
Rilsan® coated
FPM
Code

220
320
500
820
1300

199 038 026
199 038 027
199 038 028
199 038 029
199 038 030

199 038 039
199 038 040
199 038 041
199 038 042
199 038 043

27130
47130
77110
114240

1900
3330
5400
8000

199 038 031
199 038 032
199 038 033
199 038 034

199 038 044
199 038 045
199 038 046
199 038 047

Cv value Disc: stainless
(Δp=1 psi) steel EPDM
[gal (US) / Code

Disc: stainless
steel FPM
Code

kv-value
(Δp=1 bar)

min]

3140
4570
7140
11710
18570

220
320
500
820
1300

199 038 226
199 038 227
199 038 228
199 038 229
199 038 230

199 038 239
199 038 240
199 038 241
199 038 242
199 038 243

27130
47130
77110
114240

1900
3330
5400
8000

199 038 231
199 038 232
199 038 233
199 038 234

199 038 244
199 038 245
199 038 246
199 038 247

kv-value
(Δp=1 bar)
[l/min]

63 50
2 10
75 65 2 1∕2 10
90 80
3 10
110 100
4 10
140 125
5 10

Cv value Disc: ductile iron/
(Δp=1 psi) Rilsan® coated
[gal (US) / EPDM
min]
Code

3140
4570
7140
11710
18570

[l/min]

63 50
2 10
75 65 2 1∕2 10
90 80
3 10
110 100
4 10
140 125
5 10
160
225
280
315

kv-value
(Δp=1 bar)

Cv value Disc: Alu-bronze
(Δp=1 psi) EPDM
[gal (US) / Code
min]

3140
4570
7140
11710
18570

220
320
500
820
1300

199 038 426
199 038 427
199 038 428
199 038 429
199 038 430

27130
47130
77110
114240

1900
3330
5400
8000

199 038 431
199 038 432
199 038 433
199 038 434

kv-value
(Δp=1 bar)
[l/min]

Cv value Disc: Alu-bronze
(Δp=1 psi) FPM
[gal (US) / Code

kg

min]

3140
4570
7140

table continued next page

220 199 038 439
320 199 038 440
500 199 038 441

5.300
6.400
6.900

d

[mm]

DN

[mm]

Inch PN

[l/min]

110 100
140 125
160
225
280
315
d

[mm]

150
200
250
300
d3

[mm]

kv-value
(Δp=1 bar)

4 10
5 10
6
8
10
12
D5

[mm]

10
10
10
10
L

Cv value Disc: Alu-bronze
(Δp=1 psi) FPM
[gal (US) / Code
min]

11710
18570
27130
47130
77110
114240
L1

[mm] [mm]

84
84
84
84
84

kg

L2

[mm]

820 199 038 442
1300 199 038 443

10.400
12.300

1900
3330
5400
8000

14.100
20.400
37.000
51.000

L3

199 038 444
199 038 445
199 038 446
199 038 447

L4

[mm] [mm]

H

[mm]

H1

[mm]

H2

[mm]

H3

[mm]

63
75
90
110
140

95
114
131
152
182

125
125
125
125
125

43
46
46
52
56

152
152
152
152
152

38
38
38
38
38

107
107
107
107
107

261 63
283 73
298 81
333 97
361 112

140
152
159
178
191

58
58
58
58
58

160
225
280
315

209
262
331
380

125
125
250
250

56 84 152
60 84 152
68 106 152
78 106 152

38
38
52
52

107
107
141
141

383
452
545
623

203
245
275
315

58
58
67
67

122
149
203
241

107

Spare parts butterfly valves
Spare parts butterfly valve type 567/568

Inner body
Model:
• Inner body consisting of: inner body (2) and profile seal (13)
d

[mm]

Inch DN

[mm]

ABS EPDM
Code

63
2 50 169 481 067
75 2 1∕2 65 169 481 068
90
3 80 169 481 069
110
4 100 169 481 070
140
5 125 169 481 071
160
6 150 169 481 072
225
8 200 169 481 073

kg

0.113
0.137
0.194
0.346
0.510
0.632
1.085

Flange seal (12)
Model:
• included in delivery 1 pcs.
d

[mm]

108

Inch DN

[mm]

EPDM
Code

kg

63
2 50 161 486 959
75 2 1∕2 65 161 486 960
90
3 80 161 486 961
110
4 100 161 486 962
125
5 125 161 486 963

0.007
0.008
0.009
0.021
0.025

160
225
280
315
355

6
8
10
12
14

150
200
250
300
350

161 486 964
161 486 965
161 486 966
161 486 967
748 410 318

0.030
0.037
0.053
0.061
0.001

400
450
500
630

16
18
20
24

400
450
500
600

748 410 319
748 410 320
748 410 321
748 410 322

0.002
0.002
0.002
0.002

Disc (3)
d

[mm]

Inch DN

[mm]

ABS
Code

63
2 50 169 480 951
75 2 1∕2 65 169 480 952
90
3 80 169 480 953
110
4 100 169 480 954
140
5 125 169 480 955
160
6 150 169 480 956
225
8 200 169 480 957

kg

0.027
0.046
0.078
0.151
0.272
0.475
0.590

End stopp PP glasfiber reinforced (4)
d

[mm]

Inch DN

[mm]

Code

kg

63
2 50 167 483 251
75 2 1∕2 65 167 483 251
90
3 80 167 483 251
110
4 100 167 483 252
140
5 125 167 483 252

0.023
0.023
0.023
0.033
0.033

160
225
280
315

0.049
0.049
0.096
0.096

6
8
10
12

150
200
250
300

167 483 253
167 483 253
167 483 254
167 483 254

Shaft set
Model:
• Shaft set consisting of: shaft chrom steel 1.4301 AISI 304 (6), retention ring
(7, 9) and washer (8)
d

[mm]

Inch DN

[mm]

Code

kg

63
2 50 161 486 899
75 2 1∕2 65 161 486 900
90
3 80 161 486 901
110
4 100 161 486 902
140
5 125 161 486 903

0.225
0.237
0.249
0.429
0.469

160
225
280
315
355

6
8
10
12
14

150
200
250
300
350

161 486 904
161 486 905
161 486 906
161 486 907
161 486 908

0.749
0.844
2.335
2.536
7.600

400
450
500
630

16
18
20
24

400
450
500
600

161 486 909
161 486 926
161 486 927
161 486 928

8.900
11.800
14.400
26.000

Hand lever
d

[mm]

Inch DN

63
2
75 2 1∕2
90
3

[mm]

with index plate with fine adjustment
Code
Code

50 161 486 690 161 486 325
65 161 486 690 161 486 325
80 161 486 690 161 486 325

table continued next page

kg

0.485
0.485
0.485
109

d

[mm]

Inch DN

[mm]

110
140
160
225
280
315

with index plate with fine adjustment
Code
Code

4 100 161 486 691 161 486 326
5 125 161 486 691 161 486 326
6
8
10
12

150
200
250
300

161 486 694 161 486 327
161 486 695 161 486 328
161 486 697
161 486 697

kg

0.540
0.540
0.537
1.375
0.330
0.330

Profile seal (13) DN350-600
d

[mm]

355
400
450
500
630

Inch DN

[mm]

14
16
18
20
24

350
400
450
500
600

EPDM
Code

kg

748 440 018
748 440 019
748 440 020
748 440 021
748 440 022

0.261
0.297
0.430
0.480
0.686

Intermediate element
Gear operated with handwheel 567 / 568
d

[mm]

DN

[mm]

Code

kg

63 50 198 000 621
75 65 198 000 621
90 80 198 000 621
110 100 198 000 622
140 125 198 000 622

0.150
0.150
0.150
0.150
0.150

160
225
280
315

0.100
0.100
0.750
0.750

150
200
250
300

198 000 599
198 000 599
198 000 880
198 000 880

Reduction gear with handwheel
d

[mm]

110

Inch DN

[mm]

Code

kg

75 2 1∕2 65 161 482 408
90
3 80 161 482 408
110
4 100 161 482 408
125 4 1∕2 125 161 482 408
160
6 150 161 482 408

2.260
2.260
2.260
2.260
2.260

225
280
315

2.260
2.840
2.840

8 200 161 482 408
10 250 161 483 462
12 300 161 483 462

Angle seat check valves
Angle seat check valve type 303 ABS
With solvent cement spigots metric
Model:
•
•
•
•

For horizontal or vertical installation
Leakproof from: EPDM 2m, FPM 3m water column
Specific gravity of piston approx. 2 kg/dm³
Overall length EN 558

d

DN

[mm] [mm]

20
25
32
40
50
63

15
20
25
32
40
50

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10

95
180
327
484
725
1130

EPDM
Code

169 303 006
169 303 007
169 303 008
169 303 009
169 303 010
169 303 011

kg

0.090
0.137
0.228
0.348
0.624
1.108

D

L

[mm] [mm]

43
47
56
64
82
95

124
144
154
174
194
224

L1

[mm]

130
150
160
180
200
230

L2

H

[mm] [mm]

28 65
37 75
37 90
44 102
48 123
60 144

111

Ball check (non-return) valve
Ball check (non return) valve type 360 ABS
With solvent cement sockets Inch BS
Inch PN

kv-value
(Δp=1 bar)
[l/min]

16
16
3∕4
16
1 16
1 1∕4 16
1 1∕2 16
2 16

170
150
330
390
710
900
1390

3∕8
1∕2

Inch z

[mm]

D

L

[mm]

[mm]

71 46
1∕2
70 46
3∕4
82 56
1 87 67
1 1∕4 98 82
1 1∕2 101 92
2 121 120
3∕8

EPDM
Code

FPM
Code

169 360 521
169 360 522
169 360 523
169 360 524
169 360 525
169 360 526
169 360 527

169 360 531
169 360 532
169 360 533
169 360 534
169 360 535
169 360 536
169 360 537

kg

0.105
0.105
0.174
0.269
0.442
0.727
1.315

L2

[mm]

99 63
102 63
120 75
131 79
150 89
163 95
197 115

Ball check (non return) valve type 360 ABS
With threaded sockets Rp Inch
Inch PN

kv-value
(Δp=1 bar)
[l/min]

16
1∕2
16
3∕4
16
1 16
1 1∕4 16
1 1∕2 16
2 16

170
150
330
390
710
900
1390

3∕8

Inch z

[mm]

D

[mm]

71 46
1∕2
70 46
3∕4
82 56
1 87 67
1 1∕4 98 82
1 1∕2 101 92
2 121 120
3∕8

112

L

[mm]

EPDM
Code

FPM
Code

169 360 421
169 360 422
169 360 423
169 360 424
169 360 425
169 360 426
169 360 427

169 360 431
169 360 432
169 360 433
169 360 434
169 360 435
169 360 436
169 360 437

L2

[mm]

99 63
102 63
120 75
131 79
150 89
163 95
197 115

kg

0.105
0.105
0.174
0.269
0.442
0.727
1.315

Ball check (non-return) valve type 360 ABS
With solvent cement sockets metric
Model:
•
•
•
•
•

For easy installation and removal
The ball seals at a minimum water column of 2 m
Vibration free even at high flow velocity
Minimum temperature: - 40°C
For horizontal or vertical installation

d

DN

[mm] [mm]

16
20
25
32
40
50
63

10
15
20
25
32
40
50

PN

kv-value
(Δp=1 bar)
[l/min]

10
10
10
10
10
10
10

170
150
330
390
710
900
1390

EPDM
Code

169 360 401
169 360 402
169 360 403
169 360 404
169 360 405
169 360 406
169 360 407

kg

z

[mm]

D

[mm]

0.105 71 45
0.105 70 45
0.175 82 56
0.271 87 67
0.445 98 82
0.715 101 92
1.271 121 120

L

[mm]

L2

[mm]

99 63
102 63
120 75
131 79
150 89
163 95
197 115

113

Spare parts ball check valves
Spare parts ball check valve type 360

Central part
Model:
• Central part consisting of: body (1), ball (2), support ring (3), sealing ring
(4) and union bush (5)
d

[mm]

Inch DN

ABS EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

169 480 250
169 480 251
169 480 252
169 480 253
169 480 254
169 480 255
169 480 256

kg

0.063
0.063
0.105
0.170
0.274
0.422
0.799

Ball (2)
d

[mm]

d

PVC-U

PP-H with talc
density 1.24
Code

PP-H 100%
Code

161 330 304
161 330 304
161 330 354
161 330 404
161 330 454

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

10
15
20
25
32

167 481 165
167 481 165
167 481 166
167 481 167
167 481 168

167 480 024
167 480 024
167 480 025
167 480 026
167 480 027

50 1 1∕2
63
2
90
3

40 161 330 504 167 481 169
50 161 330 554 167 481 170
80 161 330 654

167 480 028
167 480 029

[mm]

114

Inch DN

Inch DN

PVDF

[mm] Code

kg

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

10
15
20
25
32

175 480 153
175 480 153
175 480 154
175 480 155
175 480 156

0.010
0.010
0.014
0.028
0.064

50 1 1∕2
63
2
90
3

40 175 480 157
50 175 480 158
80

0.093
0.214
0.475

Sealing ring (4)
d

[mm]

Inch DN

EPDM

[mm] Code

kg

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

10
15
20
25
32

161 483 259
161 483 259
161 483 260
161 483 261
161 483 262

0.005
0.005
0.003
0.005
0.004

50 1 1∕2
63
2
90
3

40 161 483 263
50 161 483 264
80 161 480 141

0.012
0.025
0.046

Face seal (6)
d

[mm]

Inch DN

EPDM

[mm] Code

kg

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4

10
15
20
25
32

748 410 042
748 410 042
748 410 116
748 410 103
748 410 027

0.002
0.002
0.002
0.003
0.005

50 1 1∕2
63
2
90
3

40 748 410 010
50 748 410 011
80 748 410 099

0.004
0.005
0.009

Union nut (8)
d

[mm]

Inch DN

ABS

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

169 480 101
169 480 101
169 480 102
169 480 103
169 480 104
169 480 105
169 480 106

kg

0.013
0.013
0.030
0.004
0.063
0.085
0.160

Valve end with socket (7)
d

[mm]

Inch DN

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

ABS metric

[mm] Code

10
15
20
25
32
40
50

169 480 152
169 480 153
169 480 154
169 480 155
169 480 156
169 480 157
169 480 158

kg

0.007
0.007
0.010
0.016
0.032
0.052
0.087

115

Seal set (4, 6)
d

[mm]

Inch DN

EPDM

[mm] Code

3∕8
16
1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

10
15
20
25
32
40
50

161 482 910
161 482 910
161 482 911
161 482 912
161 482 913
161 482 914
161 482 915

kg

0.003
0.003
0.007
0.011
0.016
0.032
0.065

Body (1)
d

[mm]

90

116

Inch DN

PVC-U

[mm] Code

3

80 161 480 158

kg

1.790

Strainers
Line strainer type 305 ABS
With solvent cement spigots metric
Model:
•
•
•
•
•
•

Protects valves, pumps, etc. from becoming soiled
Easy dismantling for cleaning the screens
Cylindrical screen must be ordered separately
Overall length EN 558
Screen in stainless steel operable temperature range up -40°C to +60°C
Screen in PVC-U operable temperature range up 0°C to +60°C

d

DN

[mm] [mm]

20
25
32
40
50
63

15
20
25
32
40
50

PN

10
10
10
10
10
10

EPDM
Code

kg

169 305 302
169 305 303
169 305 304
169 305 305
169 305 306
169 305 307

D

L

[mm]

[mm]

0.080 48
0.120 54
0.180 62
0.280 71
0.470 88
0.780 103

124
144
154
174
194
224

L1

[mm]

L2

H

[mm] [mm]

130
150
160
180
200
230

28 65
37 76
37 90
44 104
48 124
60 148

Cylindrical screen type 305 PVC-U
Screen perforations 0.5 mm
• For line strainers Type 305
d

[mm]

Inch DN

kv-value

[mm] (Δp=1 bar)
[l/min]

Code

kg

D

L

[mm] [mm]

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2

15
20
25
32
40

35
65
90
155
225

161 305 339
161 305 389
161 305 439
161 305 489
161 305 539

0.005
0.007
0.003
0.004
0.007

14
18
24
30
38

39
48
60
71
87

63
2
75 2 1∕2
90
3

50
65
80

370 161 305 589
575 161 305 639
955 161 305 689

0.010
0.012
0.017

48 106
61 100
73 118

Cylindrical screen type 305 PVC-U
Screen perforations 0.8 mm
• For line strainers Type 305
d

DN

kv-value

[mm] [mm] (Δp=1 bar)
[l/min]

Code

kg

D

L

[mm] [mm]

20
25
32
40
50

15
20
25
32
40

35
65
90
155
225

161 305 338
161 305 388
161 305 438
161 305 488
161 305 538

0.005
0.007
0.003
0.004
0.006

14
18
24
30
38

39
48
60
71
87

63
75
90

50
65
80

370 161 305 588
575 161 305 638
955 161 305 688

0.009
0.012
0.010

48 106
61 100
73 118

117

Cylindrical screen type 305 PVC-U
Screen perforations 1.4 mm
d

DN

kv-value

[mm] [mm] (Δp=1 bar)
[l/min]

Code

kg

D

L

[mm] [mm]

20
25
32
40
50

15
20
25
32
40

35
65
90
155
225

161 305 337
161 305 387
161 305 437
161 305 487
161 305 537

0.005
0.003
0.003
0.004
0.006

14
18
24
30
38

39
48
60
71
87

63
75
90

50
65
80

370 161 305 587
575 161 305 637
955 161 305 687

0.008
0.011
0.015

48 106
61 100
73 118

Cylindrical screen type 305 PVC-U
Screen perforations 2.2 mm
d

DN

kv-value

[mm] [mm] (Δp=1 bar)
[l/min]

Code

kg

D

L

[mm] [mm]

20
25
32
40
50

15
20
25
32
40

35
65
90
155
225

161 305 336
161 305 386
161 305 436
161 305 486
161 305 536

0.005
0.003
0.003
0.003
0.005

14
18
24
30
38

39
48
60
71
87

63
75
90

50
65
80

370 161 305 586
575 161 305 636
955 161 305 686

0.008
0.010
0.013

48 106
61 100
73 118

Screen stainless steel
Screen perforation 0.5 mm
Model:
• Stainless Steel A4 Quality (AISI 316)
• For line strainers Type 305
d

DN

kv-value

[mm] [mm] (Δp=1 bar)
[l/min]

118

Code

kg

D

L

[mm] [mm]

20
25
32
40
50

15
20
25
32
40

35
60
85
130
200

161 486 100
161 486 101
161 486 102
161 486 103
161 486 104

0.002
0.004
0.006
0.009
0.014

14
18
24
30
38

39
48
60
71
87

63
75
90

50
65
80

330 161 486 105
460 161 486 106
665 161 486 107

0.022
0.026
0.036

48 106
61 100
73 118

Spare parts line strainer
Spare parts line strainer type 305/306

Screen set
Model:
• Screen set PVC-U DN10-DN50 consisting of: screen (3), screen support ring
(2) and circlip (6), PVC-U DN65-DN80: screen (3) and screen support ring (2).
PP-H DN15-DN50: screen basket compl. without screen (2) and circlip (7)
d

[mm]

Inch DN

PVC-U

PP-H
Code

161 483 126
161 483 127
161 483 128
161 483 129
161 483 130

[mm] Code

kg

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2

15
20
25
32
40

167 305 001
167 305 002
167 305 003
167 305 004
167 305 005

0.110
0.070
0.255
0.135
0.140

63
2
75 2 1∕2
90
3

50 161 483 131 167 305 006
65 161 483 132
80 161 483 133

0.140
0.490
0.390

Body (1)
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

ABS

[mm] Code

15
20
25
32
40
50

169 480 600
169 480 601
169 480 602
169 480 603
169 480 604
169 480 605

119

Screen cage
Model:
• Screen cage in PVC-U (3) and PP-H (2)
d

[mm]

Inch DN

PVC-U

PVC-C
Code

PP-H
Code

161 305 303
161 305 353
161 305 403
161 305 453
161 305 503

163 481 102
163 481 103
163 481 104
163 481 105
163 481 106

[mm] Code

kg

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2

15
20
25
32
40

167 305 020
167 305 021
167 305 022
167 305 023
167 305 024

0.005
0.007
0.003
0.004
0.005

63
2
75 2 1∕2
90
3

50 161 305 553 163 481 107 167 305 025
65 161 305 603
80 161 305 653

0.010
0.309
0.372

Screen cage bracket
Model:
• Only for the version in PP-H available
d

[mm]

Inch DN

PP-H

[mm] Code

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

15
20
25
32
40
50

167 305 040
167 305 041
167 305 042
167 305 043
167 305 044
167 305 045

kg

0.018
0.024
0.035
0.055
0.088
0.132

Valve end metric
Model:
• Only for the version in PP-H available
d

[mm]

Inch DN

fusion socket PP- butt fusion spigot kg
IR PP-H SDR11
Code
Code

[mm] H

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

15
20
25
32
40
50

727 600 106
727 600 107
727 600 108
727 600 109
727 600 110
727 600 111

727 608 506
727 608 507
727 608 508
727 608 509
727 608 510
727 608 511

Valve nut
Model:
• Union nut PVC-U DN10-DN50 (4), PP-H (6, 8)
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

120

Cap nut ABS

[mm] Code

15
20
25
32
40
50

169 480 609
169 480 610
169 480 611
169 480 612
169 480 613
169 480 614

kg

0.025
0.018
0.030
0.035
0.064
0.110

0.010
0.017
0.024
0.041
0.054
0.092

Body seal
Model:
• Body seal vor PVC-U (5), PP-H (10)
d

[mm]

Inch DN

EPDM

[mm] Code

kg

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2

15
20
25
32
40

748 410 006
748 410 001
748 410 007
748 410 002
748 410 003

0.001
0.002
0.002
0.003
0.004

63
2
75 2 1∕2
90
3

50 748 410 012
65 748 410 013
80 748 410 014

0.004
0.006
0.007

Screen perforation
Model:
• For PVC-U (7), PP-H (3)
• Stainless Steel A4 Quality (AISI 316)
d

[mm]

Inch DN

PVC-U 0.5mm

PVC-U 0.8mm
Code

PVC-U 1.4mm
Code

PVC-U 2.2mm
Code

161 305 339
161 305 389
161 305 439
161 305 489
161 305 539

161 305 338
161 305 388
161 305 438
161 305 488
161 305 538

161 305 337
161 305 387
161 305 437
161 305 487
161 305 537

161 305 336
161 305 386
161 305 436
161 305 486
161 305 536

[mm] Code

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2

15
20
25
32
40

63
2
75 2 1∕2
90
3

50 161 305 589 161 305 588 161 305 587 161 305 586
65 161 305 639 161 305 638 161 305 637 161 305 636
80 161 305 689 161 305 688 161 305 687 161 305 686

d

[mm]

Inch DN

PP-H

stainless steel
0.5mm
Code

167 305 030
167 305 031
167 305 032
167 305 033
167 305 034

[mm] Code

kg

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2

15
20
25
32
40

161 486 100
161 486 101
161 486 102
161 486 103
161 486 104

0.002
0.004
0.006
0.009
0.014

63
2
75 2 1∕2
90
3

50 167 305 035 161 486 105
65
161 486 106
80
161 486 107

0.022
0.026
0.036

Plug (4)
Model:
• Only for PVC-U DN65-DN80
d

[mm]

Inch DN

75 2 1∕2
90
3

PVC-U

[mm] Code

65 161 305 604
80 161 305 654

kg

0.200
0.265

121

Circlip (7)
Model:
• Only for the version in PP-H available
d

[mm]

Inch DN

1∕2
20
3∕4
25
32
1
40 1 1∕4
50 1 1∕2
63
2

122

PP-H

[mm] Code

15
20
25
32
40
50

161 482 017
161 482 018
161 482 019
161 482 020
161 482 021
161 482 022

kg

0.003
0.003
0.005
0.003
0.003
0.004

Variable area flow meters
Variable area flow meters
Float in PVDF without magnet
With solvent cement sockets ABS BS Inch
Scale range
[l/h]

d

DN

50 - 500
1
100 - 1000
1
300 - 3000 1 1∕2
600 - 6000 1 1∕2
1000 - 10000
2
1500 - 15000
2
Scale range
[l/h]

Taper tube in

Taper tube in

in EPDM
Code

rings in EPDM
Code

198 802 814
198 802 816
198 802 818
198 802 820
198 802 822
198 802 824

198 802 815
198 802 817
198 802 819
198 802 821
198 802 823
198 802 825

[inch] [mm] Polyamid O-rings Polysulfone O-

D

[mm]

25
25
40
40
50
50
L

[mm]

50 - 500 58 385
100 - 1000 58 385
300 - 3000 83 403
600 - 6000 83 403
1000 - 10000 101 417
1500 - 15000 101 417

L1

[mm]

341
341
341
341
341
341

L2

[mm]

335
335
335
335
335
335

G

[inch]

1 1∕2
1 1∕2
2 1∕4
2 1∕4
2 3∕4
2 3∕4

123

Variable area flow meters
Float in PVDF with magnet
With solvent cement sockets ABS BS Inch
Model:
• Suitable limit switches see accessories for variable area flow meters
Scale range
[l/h]

d

DN

50 - 500
1
100 - 1000
1
300 - 3000 1 1∕2
600 - 6000 1 1∕2
1000 - 10000
2
1500 - 15000
2
Scale range
[l/h]

Taper tube in

Taper tube in

in EPDM
Code

rings in EPDM
Code

198 802 826
198 802 828
198 802 830
198 802 832
198 802 834
198 802 836

198 802 827
198 802 829
198 802 831
198 802 833
198 802 835
198 802 837

[inch] [mm] Polyamid O-rings Polysulfone O-

D

[mm]

25
25
40
40
50
50
L

[mm]

50 - 500 58 385
100 - 1000 58 385
300 - 3000 83 403
600 - 6000 83 403
1000 - 10000 101 417
1500 - 15000 101 417

124

L1

[mm]

341
341
341
341
341
341

L2

[mm]

335
335
335
335
335
335

G

[inch]

1 1∕2
1 1∕2
2 1∕4
2 1∕4
2 3∕4
2 3∕4

Variable area flow meters
Float in PVDF without magnet
With solvent cement sockets ABS metric
Scale range
[l/h]

d

50 - 500
100 - 1000
300 - 3000
600 - 6000
1000 - 10000
1500 - 15000
Scale range
[l/h]

DN

Taper tube in

Taper tube in

in EPDM
Code

rings in EPDM
Code

198 807 120
198 807 121
198 807 122
198 807 123
198 807 124
198 807 125

198 807 126
198 807 127
198 807 128
198 807 129
198 807 130
198 807 131

[mm] [mm] Polyamid O-rings Polysulfone O-

32
32
50
50
63
63
D

[mm]

25
25
40
40
50
50
L

[mm]

50 - 500 58 385
100 - 1000 58 385
300 - 3000 83 403
600 - 6000 83 403
1000 - 10000 101 417
1500 - 15000 101 417

L1

[mm]

341
341
341
341
341
341

L2

[mm]

335
335
335
335
335
335

G

[inch]

1 1∕2
1 1∕2
2 1∕4
2 1∕4
2 3∕4
2 3∕4

125

Variable area flow meters
Float in PVDF with magnet
With solvent cement sockets ABS metric
Model:
• Suitable limit switches see accessories for variable area flow meters
Scale range
[l/h]

d

50 - 500
100 - 1000
300 - 3000
600 - 6000
1000 - 10000
1500 - 15000
Scale range
[l/h]

DN

Taper tube in

Taper tube in

in EPDM
Code

rings in EPDM
Code

198 807 132
198 807 133
198 807 134
198 807 135
198 807 136
198 807 137

198 807 138
198 807 139
198 807 140
198 807 141
198 807 142
198 807 143

[mm] [mm] Polyamid O-rings Polysulfone O-

32
32
50
50
63
63
D

[mm]

25
25
40
40
50
50
L

[mm]

50 - 500 58 385
100 - 1000 58 385
300 - 3000 83 403
600 - 6000 83 403
1000 - 10000 101 417
1500 - 15000 101 417

126

L1

[mm]

341
341
341
341
341
341

L2

[mm]

335
335
335
335
335
335

G

[inch]

1 1∕2
1 1∕2
2 1∕4
2 1∕4
2 3∕4
2 3∕4

Short Version
Float in PVDF without magnet
With solvent cement sockets ABS BS Inch
Model:
• Union nuts and valve ends in other materials on request
Type

d

DN

Scale range

[inch] [mm] [l/h]

SK50
SK51
SK52
SK60
SK61

3∕8

SK62
SK70
SK71
SK72
SK73

1∕2

3∕8
3∕8
1∕2
1∕2

1
1
1
1

Taper tube in
Polysulfone Orings in EPDM
Code

D

L

[mm] [mm]

L1

[mm]

L2

[mm]

10
10
10
15
15

2.5 - 25
5 - 50
10 - 100
8 - 80
15 - 150

198 807 040
198 807 041
198 807 042
198 807 043
198 807 044

35
35
35
43
43

199
199
199
223
223

171
171
171
191
191

165
165
165
185
185

15
25
25
25
25

20 - 200
15 - 150
30 - 300
50 - 500
100 - 1000

198 807 045
198 807 046
198 807 047
198 807 048
198 807 049

43
60
60
60
60

223
250
250
250
250

191
206
206
206
206

185
200
200
200
200

127

Short Version
Float in PVDF with magnet
With solvent cement sockets ABS BS Inch
Model:
• Suitable limit switches see accessories for variable area flow meters
• Union nuts and valve ends in other materials on request
Type

128

d

DN

Scale range

[inch] [mm] [l/h]

SK500
SK510
SK520
SK600
SK610

3∕8

SK620
SK700
SK710
SK720
SK730

1∕2

3∕8
3∕8
1∕2
1∕2

1
1
1
1

Taper tube in
Polysulfone Orings in EPDM
Code

D

L

[mm] [mm]

L1

[mm]

L2

[mm]

10
10
10
15
15

2.5 - 25
5 - 50
10 - 100
8 - 80
15 - 150

198 807 050
198 807 051
198 807 052
198 807 053
198 807 054

35
35
35
43
43

199
199
199
223
223

171
171
171
191
191

165
165
165
185
185

15
25
25
25
25

20 - 200
15 - 150
30 - 300
50 - 500
100 - 1000

198 807 055
198 807 056
198 807 057
198 807 058
198 807 059

43
60
60
60
60

223
250
250
250
250

191
206
206
206
206

185
200
200
200
200

Short Version
Float in PVDF without magnet
With solvent cement sockets ABS metric
Model:
• Union nuts and valve ends in other materials on request
Type

d

DN

Scale range

[mm] [mm] [l/h]

Taper tube in
Polysulfone Orings in EPDM
Code

D

L

[mm] [mm]

L1

[mm]

L2

[mm]

SK50
SK51
SK52
SK60
SK61

16
16
16
20
20

10
10
10
15
15

2.5 - 25
5 - 50
10 - 100
8 - 80
15 - 150

198 807 144
198 807 145
198 807 146
198 807 147
198 807 148

35
35
35
43
43

199
199
199
223
223

171
171
171
191
191

165
165
165
185
185

SK62
SK70
SK71
SK72
SK73

20
32
32
32
32

15
25
25
25
25

20 - 200
15 - 150
30 - 300
50 - 500
100 - 1000

198 807 149
198 807 150
198 807 151
198 807 152
198 807 153

43
60
60
60
60

223
250
250
250
250

191
206
206
206
206

185
200
200
200
200

129

Short Version
Float in PVDF with magnet
With solvent cement sockets ABS metric
Model:
• Suitable limit switches see accessories for variable area flow meters
• Union nuts and valve ends in other materials on request
Type

d

DN

Scale range

Taper tube in
Polysulfone Orings in EPDM
Code

[mm] [mm] [l/h]

D

L

L1

[mm] [mm]

[mm]

[mm]

SK500
SK510
SK520
SK600
SK610

16
16
16
20
20

10
10
10
15
15

2.5 - 25
5 - 50
10 - 100
8 - 80
15 - 150

198 807 154
198 807 155
198 807 156
198 807 157
198 807 158

35
35
35
43
43

199
199
199
223
223

171
171
171
191
191

165
165
165
185
185

SK620
SK700
SK710
SK720
SK730

20
32
32
32
32

15
25
25
25
25

20 - 200
15 - 150
30 - 300
50 - 500
100 - 1000

198 807 159
198 807 160
198 807 161
198 807 162
198 807 163

43
60
60
60
60

223
250
250
250
250

191
206
206
206
206

185
200
200
200
200

Accessories
4-20 mA sensor
For type 335 and type 350
Type

130

L2

d

DN

Corresponds to water scale Code

[mm] [mm] [l/h]

kg

GK 15
GK 15
GK 15
GK 15
GK 15

32
32
40
40
50

25
25
32
32
40

50-500
100-1000
150-1500
250-2500
200-2000

198 335 962
198 335 963
198 335 964
198 335 965
198 335 966

0.150
0.150
0.150
0.150
0.150

GK 15
GK 15
GK 15
GK 15
GK 15

50
50
63
63
63

40
40
50
50
50

300-3000
600-6000
600-6000
1000-10000
1500-15000

198 335 967
198 335 968
198 335 969
198 335 991
198 335 992

0.150
0.150
0.150
0.150
0.150

GK 15
GK 15
GK 15

75
75
75

65
65
65

2000-20000 198 335 993
3000-30000 198 335 994
8000-60000 198 335 995

0.150
0.150
0.150

Accessories
Limit contacts GK10/GK11
For type 335/350 and short version
Type

Code

GK10 (min.) 198 335 960
GK11 (max.) 198 335 961

kg

0.033
0.033

131

Spare parts variable area flow meters
Variable area flow meter type 335

Taper tube with water scale (1)
• PVC-U transparent
Scale range
[l/h]

[mm]

Inch DN

PVC-U transpar-

Polyamid
Code

[mm] ent

Code

50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000

32
1
32
1
40 1 1∕4
40 1 1∕4
50 1 1∕2

25
25
32
32
40

198 335 055
198 335 056
198 335 057
198 335 058
198 335 059

198 335 070
198 335 071
198 335 072
198 335 073
198 335 074

300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000

50 1 1∕2
50 1 1∕2
63
2
63
2
63
2

40
40
50
50
50

198 335 060
198 335 061
198335062*
198335063*
198335064*

198 335 075
198 335 076
198 335 077
198 335 078
198 335 079

2000 - 20000
3000 - 30000
8000 - 60000

75 2 1∕2
75 2 1∕2
75 2 1∕2

65 198335065*
65 198335066*
65 198335067*

198 335 080
198 335 081
198 335 082

Scale range
[l/h]

132

d

d

[mm]

Inch DN

Polysulfon

[mm] Code

kg

50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000

32
1
32
1
40 1 1∕4
40 1 1∕4
50 1 1∕2

25
25
32
32
40

198 335 085
198 335 086
198 335 087
198 335 088
198 335 089

0.214
0.214
0.290
0.290
0.350

300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000

50 1 1∕2
50 1 1∕2
63
2
63
2
63
2

40
40
50
50
50

198 335 090
198 335 091
198 335 092
198 335 093
198 335 094

0.350
0.350
0.453
0.453
0.453

2000 - 20000
3000 - 30000
8000 - 60000

75 2 1∕2
75 2 1∕2
75 2 1∕2

65 198 335 095
65 198 335 096
65 198 335 097

0.622
0.622
0.622

Taper tube without scale (1)
• PVC-U transparent
Scale range
[l/h]

d

[mm]

Inch DN

PVC-U transpar-

Polyamid
Code

[mm] ent

Code

50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000

32
1
32
1
40 1 1∕4
40 1 1∕4
50 1 1∕2

25
25
32
32
40

198 335 255
198 335 256
198 335 257
198 335 258
198 335 259

198 335 270
198 335 271
198 335 272
198 335 273
198 335 274

300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000

50 1 1∕2
50 1 1∕2
63
2
63
2
63
2

40
40
50
50
50

198 335 260
198 335 261
198335262*
198335263*
198335264*

198 335 275
198 335 276
198 335 277
198 335 278
198 335 279

2000 - 20000
3000 - 30000
8000 - 60000

75 2 1∕2
75 2 1∕2
75 2 1∕2

65 198335265*
65 198335266*
65 198335267*

198 335 280
198 335 281
198 335 282

Scale range
[l/h]

d

[mm]

Inch DN

Polysulfon

[mm] Code

kg

50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000

32
1
32
1
40 1 1∕4
40 1 1∕4
50 1 1∕2

25
25
32
32
40

198 335 285
198 335 286
198 335 287
198 335 288
198 335 289

0.214
0.214
0.290
0.290
0.350

300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000

50 1 1∕2
50 1 1∕2
63
2
63
2
63
2

40
40
50
50
50

198 335 290
198 335 291
198 335 292
198 335 293
198 335 294

0.350
0.350
0.453
0.453
0.453

2000 - 20000
3000 - 30000
8000 - 60000

75 2 1∕2
75 2 1∕2
75 2 1∕2

65 198 335 295
65 198 335 296
65 198 335 297

0.622
0.622
0.622

Insert PVDF (3,4)
Scale range
[l/h]

d

[mm]

Inch DN

top (4)

bottom (3)
Code

[mm] Code

kg

50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000

32
1
32
1
40 1 1∕4
40 1 1∕4
50 1 1∕2

25
25
32
32
40

198 335 970
198 335 970
198 335 971
198 335 971
198 335 972

198 335 977
198 335 977
198 335 978
198 335 978
198 335 979

0.012
0.012
0.019
0.019
0.024

300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000

50 1 1∕2
50 1 1∕2
63
2
63
2
63
2

40
40
50
50
50

198 335 972
198 335 972
198 335 973
198 335 973
198 335 974

198 335 979
198 335 979
198 335 980
198 335 980
198 335 982

0.024
0.024
0.042
0.042
0.042

2000 - 20000
3000 - 30000
8000 - 60000

75 2 1∕2
75 2 1∕2
75 2 1∕2

65 198 335 975 198 335 981
65 198 335 975 198 335 981
65 198 335 975 198 335 981

0.059
0.059
0.059

133

Float PVDF (2)
Scale range

d

[l/h]

[mm]

Inch DN

Without magnet With magnet
(bistabil)
Code

kg

[mm] Code

50 - 500
100 - 1000
150 - 1500
250 - 2500
200 - 2000

32
1
32
1
40 1 1∕4
40 1 1∕4
50 1 1∕2

25
25
32
32
40

198 335 455
198 335 455
198 335 455
198 335 455
198 335 456

198 335 470
198 335 470
198 335 470
198 335 470
198 335 471

0.150
0.150
0.150
0.150
0.328

300 - 3000
600 - 6000
600 - 6000
1000 - 10000
1500 - 15000

50 1 1∕2
50 1 1∕2
63
2
63
2
63
2

40
40
50
50
50

198 335 457
198 335 457
198 335 457
198 335 457
198 335 458

198 335 471
198 335 471
198 335 471
198 335 471
198 335 472

0.328
0.328
0.328
0.328
0.328

2000 - 20000
3000 - 30000
8000 - 60000

75 2 1∕2
75 2 1∕2
75 2 1∕2

65 198 335 459 198 335 473
65 198 335 459 198 335 473
65 198 335 460 198 335 474

0.920
0.920
0.746

Guiding rod (10)
Model:
• Only for DN50 (1'500 - 15'000 l/h) and DN65 (all metering ranges)
Scale range

d

[l/h]

[mm]

1500 - 15000
2000 - 20000
3000 - 30000
8000 - 80000

Inch DN

Peek

Stainless steel
Code

198 335 985
198 335 985
198 335 985
198 335 985

198 335 098
198 335 098
198 335 098
198 335 098

[mm] Code

63
2
75 2 1∕2
75 2 1∕2
75 2 1∕2

50
65
65
65

kg

0.013
0.013
0.013
0.013

Insert guiding rod PVDF (for 10)
Model:
• Only for DN50 (1'500 - 15'000 l/h) and DN65 (all metering ranges)
Scale range

d

[l/h]

[mm]

1500 - 15000
2000 - 20000
3000 - 30000
8000 - 80000

Inch DN

63
2
75 2 1∕2
75 2 1∕2
75 2 1∕2

Insert guiding rod kg

[mm] Code

50
65
65
65

198 335 986
198 335 987
198 335 987
198 335 987

Flow value indicator PS (8)
Model:
• For all dimensions type 335/350
d

[mm]

Inch DN

32
1
40 1 1∕4
50 1 1∕2
63
2
75 2 1∕2

134

Flow value indica- kg

[mm] tor

Code

25
32
40
50
65

198 335 990
198 335 990
198 335 990
198 335 990
198 335 990

0.001
0.001
0.001
0.001
0.001

0.020
0.020
0.020
0.020

O-rings (7)
d

[mm]

Inch DN

EPDM

[mm] Code

32
1
40 1 1∕4
50 1 1∕2
63
2
75 2 1∕2

25
32
40
50
65

748 410 008
748 410 009
748 410 010
748 410 011
748 410 014

kg

0.001
0.003
0.004
0.005
0.007

Union nut (5)
Union nut not useable for the special version with taper tube in PVDF
d

[mm]

Inch DN

ABS

[mm] Code

32
1
40 1 1∕4
50 1 1∕2
63
2
75 2 1∕2

25
32
40
50
65

729 690 408
729 690 409
729 690 410
729 690 411
-

kg

0.024
0.049
0.070
0.101

Union end / Socket (6)
For DN65 PVDF only spigot
d

[mm]

Inch DN

32
1
40 1 1∕4
50 1 1∕2
63
2
75 2 1∕2

ABS

[mm] Code

25
32
40
50
65

729 600 108
729 600 109
729 600 110
729 600 111
700 246 112

kg

0.016
0.042
0.045
0.084
0.155

135

Spare part for variable area flow meter
SK50-SK73/SK500-SK730
Short version taper tube Polysulfone
Type

d

DN

[mm] [mm]

Code

kg

SK 50 / 500
SK 51 / 510
SK 52 / 520
SK 60 / 600
SK 61 / 610

16
16
16
20
20

10
10
10
15
15

198 801 341
198 801 342
198 801 343
198 801 449
198 801 450

0.150
0.150
0.150
0.150
0.150

SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730

20
32
32
32
32

15
25
25
25
25

198 801 451
198 801 445
198 801 338
198 801 339
198 801 340

0.150
0.150
0.150
0.150
0.150

Short version taper tube PVC-U transparent
Type

d

DN

[mm] [mm]

Code

kg

SK 50 / 500
SK 51 / 510
SK 52 / 520
SK 60 / 600
SK 61 / 610

16
16
16
20
20

10
10
10
15
15

198 803 790
198 803 791
198 803 792
198 803 793
198 803 794

0.040
0.150
0.150
0.060
0.060

SK 62 / 620
SK 70 / 700
SK 71 / 710
SK 72 / 720
SK 73 / 730

20
32
32
32
32

15
25
25
25
25

198 803 795
198 803 796
198 803 797
198 803 798
198 803 799

0.300
0.127
0.150
0.120
0.120

Short version float PVDF
Without magnet
Type

d

DN

[mm] [mm]

SK 50 / 51 / 52
SK 60 / 61 / 62
SK 70 / 71 / 72 / 73

16
20
32

Code

kg

10 198 806 219
15 198 806 220
25 198 806 221

0.005
0.010
0.032

Short version float PVDF
With magnet bistable
Type

d

DN

[mm] [mm]

SK 500 / 510 / 520
SK 600 / 610 / 620
SK 700 / 710 / 720 / 730

16
20
32

Code

10 198 806 222
15 198 806 223
25 198 806 224

Short version float PTFE
Without magnet
Type

SK 73
136

d

DN

[mm] [mm]

32

Code

25 198 807 166

kg

0.019

kg

0.005
0.010
0.032

Short version top insert PVDF
Type

SK 50 / 500; 51 / 510; 52 / 520
SK 60 / 600; 61 / 610; 62 / 620
SK 70 / 700; 71 / 710; 72 / 720; 73 / 730

d

DN

[mm] [mm]

16
20
32

Code

10 198 807 188
15 198 807 187
25 198 807 182

kg

0.010
0.010
0.010

137

138

Accessories
Page
Brackets

140

Solvent and Tools

144

Backing Flanges & Gaskets

145

139

Brackets
670610

KLIP-IT pipe clip type 061 PP BS
Model:
• 3/8" - 2": height designed for Ball Valve Type 546 and 543
• Material: Clip and safety clip PP black, UV resistant, bolts galvanized
• Minimum order quantity: standard packaging SP
d

[inch]

Code

kg

0.003
0.007
0.007
0.008
0.009

0.003
0.007
0.007
0.008
0.009

167 061 059
167 061 060
167 061 061
167 061 012
167 061 013
167 061 114
167 061 016

0.012
0.022
0.030
0.058
0.090
0.114
0.217

0.012
0.022
0.030
0.058
0.090
0.114
0.217

D

L2

167 061 054
167 061 055
1∕2 167 061 056
3∕4 167 061 057
1 167 061 058
1∕4
3∕8

1
1 1∕2
2
2 1∕2
3
4
5
d

kg/m

D1

L1

H

[inch] [mm] [mm] [mm] [mm] [mm]

H1

H2

H3

[mm] [mm] [mm]

SC

1

5
6
6
6
6

8
10
10
10
10

11
14
17
19
24

14
17
19
22
27

21
23
25
28
31

10
10
10
10
10

6
6
6
6
6

12
16
16
16
16

M5
M5
M5
M5
M5

1
1 1∕2
2
2 1∕2
3
4
5

7
7
9
9
9
9
9

14
14
17
17
17
17
17

34
37
45
52
65
79
98

34 35
37 40
45 52
52 58
65 65
79 81
98 110

10
10
10
10
10
10
10

7
7
10
10
10
10
10

22
22
25
25
28
28
32

M6
M6
M8
M8
M8
M8
M8

1∕4
3∕8
1∕2
3∕4

KLIP-IT spacer type 061 PP
Model:
• For pipe clips Type 061/061H, PP black, UV resistant
• Minimum order quantity: standard packaging SP
d

Inch

[mm]

10 - 12
16
20
25
32
40
50
63
75
90
140

Code

[inch]
1∕8

kg

D

L1

[mm] [mm]

L2

[mm]

H

H1

H2

[mm] [mm] [mm]

SC

- 1∕4 167 061 153
3∕8 167 061 155
1∕2 167 061 156
3∕4 167 061 157
1 167 061 158

0.003
0.006
0.006
0.007
0.008

5
6
6
6
6

11
14
17
19
24

14
17
19
22
27

20
20
20
20
20

10
10
10
10
10

12
16
16
16
16

M4
M5
M5
M5
M5

1 1∕4
1 1∕2
2
2 1∕2
3

0.016
0.017
0.024
0.027
0.040

7
7
9
9
9

34
37
45
52
65

34
37
45
52
65

20
20
20
20
20

10
10
10
10
10

22
22
25
25
28

M6
M6
M8
M8
M8

167 061 159
167 061 160
167 061 161
167 061 162
167 061 163

table continued next page

d

Inch

[mm]

Code

[inch]

110
125
140
160

4
4 1∕2
5
6

kg

167 061 164
167 061 165
167 061 166
167 061 167

D

L1

[mm] [mm]

0.048
0.059
0.065
0.074

L2

[mm]

9 79 79
9 88 88
9 98 98
9 109 109

H

H1

H2

[mm] [mm] [mm]

20
20
20
20

10
10
10
10

28
32
32
32

SC

M8
M8
M8
M8

KLIP-IT pipe clip type 061 PP metric
Model:
• Material: Clip and safety clip PP black, UV resistant, bolts galvanized
• d16 - d63: Height designed for Ball Valve Type 546 and 543
• Minimum order quantity: standard packagings SP
d

[mm]

d

[inch]

Code

kg

* 10
* 12
* 16
* 20
* 25

167 061 003
167 061 004
167 061 035
167 061 036
167 061 037

0.003
0.003
0.006
0.008
0.009

* 32
40
50
63
75 2 1∕2

167 061 038
167 061 039
167 061 040
167 061 041
167 061 012

0.012
0.027
0.031
0.054
0.058

3 167 061 013
4 167 061 014
167 061 015
5 167 061 016
167 061 017

0.090
0.114
0.174
0.217
0.237

90
110
125
140
160
d

[mm]

D

D1

L1

[mm] [mm] [mm]

L2

[mm]

H

[mm]

H1

H2

H3

[mm] [mm] [mm]

SC

* 10
* 12
* 16
* 20
* 25

5
5
6
6
6

8
8
11
11
11

11
11
14
17
19

14
14
17
19
22

20
21
27
27
30

10
10
10
10
10

6
6
6
6
6

12
12
16
16
16

M4
M5
M5
M5
M5

* 32
40
50
63
75

6
7
7
9
9

11
14
14
17
17

24
34
37
45
52

27
34
37
45
52

36
44
51
64
58

10
10
10
10
10

6
7
7
10
10

16
22
22
25
25

M5
M6
M6
M8
M8

90
110
125
140
160

9
9
9
9
9

17 65 65 65
17 79 79 75
17 88 88 90
17 98 98 110
17 109 109 108

10
10
10
10
10

10
10
10
10
10

28
28
32
32
32

M8
M8
M8
M8
M8

141

KLIP-IT pipe clip type 061 PE metric
Model:
• Material: Clip PE and safety clip PP black, bolts galvanized
• Minimum order quantity: standard packaging SP
• Height not designed for ball valve 546 and 543. Please use spacer 73 06 11.
d

[mm]

73 06 11

Code

kg

D

D1

L1

[mm] [mm] [mm]

L2

[mm]

H

[mm]

H2

H3

[mm] [mm] [mm]

SC

* 10
* 12
* 16
* 20
* 25

173 061 003
173 061 004
173 061 005
173 061 006
173 061 007

0.003
0.006
0.007
0.008
0.009

5
5
6
6
6

8
8
11
11
11

11
11
14
17
19

14
14
17
19
22

20
21
23
25
28

10
10
10
10
10

6
6
6
6
6

12
12
16
16
16

M4
M5
M5
M5
M5

* 32
40
50
63
75

173 061 008
173 061 009
173 061 010
173 061 011
173 061 012

0.012
0.022
0.030
0.044
0.062

6
7
7
9
9

11
14
14
17
17

24
34
37
45
52

27
34
37
45
52

31
35
40
52
58

10
10
10
10
10

6
7
7
10
10

16
22
22
25
25

M5
M6
M6
M8
M8

90
110
125
140
160

173 061 013
173 061 014
173 061 015
173 061 016
173 061 017

0.090
0.114
0.174
0.217
0.237

9
9
9
9
9

17 65 65 65
17 79 79 75
17 88 88 90
17 98 98 110
17 109 109 108

10
10
10
10
10

10
10
10
10
10

28
28
32
32
32

M8
M8
M8
M8
M8

KLIP-IT spacer type 061 PE
Model:
• For pipe clips Type 061, PE black, UV resistant
• Minimum order quantity: standard packaging SP
d

[mm]

Inch

Code

kg

kg/m

16
20
25
32

1/8-1/4
3/8
1/2
3/4
1

173 061 153
173 061 155
173 061 156
173 061 157
173 061 158

0.003
0.005
0.006
0.007
0.008

0.003
0.005
0.006
0.007
0.008

40
50
63
75
90

11/4
11/2
2
21/2
3

173 061 159
173 061 160
173 061 161
173 061 162
173 061 163

0.016
0.017
0.025
0.027
0.040

0.016
0.017
0.025
0.027
0.040

110
125
140
160

4
41/2
5
6

173 061 164
173 061 165
173 061 166
173 061 167

0.048
0.059
0.065
0.074

0.048
0.059
0.065
0.074

d

[mm]

142

H1

D

L1

[mm] [mm]

L2

[mm]

H

H1

H2

[mm] [mm] [mm]

SC

16
20
25
32

5
6
6
6
6

11
14
17
19
24

14
17
19
22
27

20
20
20
20
20

10
10
10
10
10

12
16
16
16
16

40

7

34

34

20

10

22 M6

table continued next page

M4
M5
M5
M5
M5

d

[mm]

D

L1

[mm] [mm]

50
63
75
90

7
9
9
9

110
125
140
160

37
45
52
65

L2

[mm]

H

H1

H2

[mm] [mm] [mm]

SC

37
45
52
65

20
20
20
20

10
10
10
10

22
25
25
28

M6
M8
M8
M8

9 79 79
9 88 88
9 98 98
9 109 109

20
20
20
20

10
10
10
10

28
32
32
32

M8
M8
M8
M8

Pipe clip type 060 PP metric
Model:
Material: Clip and safety clip PP black, UV resistant, bolts galvanized
Accidental opening of the safety clip is not possible
Minimum order quantity: standard packaging SP or gross packaging GP
Clip and safety clip are not assembled in the packaging.
Pipes with flanges can be installed directly

•
•
•
•
•
d

[mm]

d

[inch]

Code

kg

D

L

L1

[mm] [mm]

[mm]

H

[mm]

H1

H2

SC

[mm] [mm]

90
110
125
140
160

3 167 060 038
167 060 039
167 060 040
5 167 060 041
167 060 042

0.163
0.179
0.300
0.309
0.348

9 89 71
9 94 80
11 116 91
11 121 98
11 131 107

105
115
130
130
148

15
15
20
20
20

33
33
35
35
35

M8
M8
M10
M10
M10

180
200
225
250
280

167 060 043
167 060 019
167 060 020
167 060 021
167 060 022

0.378
0.582
0.612
0.698
0.722

11
13
13
13
13

163
175
175
200
200

20
25
25
25
25

35
39
39
39
39

M10
M12
M12
M12
M12

315
355
400

167 060 023
167 060 024
167 060 025

0.842
1.250
1.450

13 219 172 225
17 275 209 258
17 300 228 288

25
30
30

39 M12
50 M16
50 M16

143
152
165
183
198

115
120
132
143
156

Pipe clip type 060 PP BS
Model:
•
•
•
•
d

Material: Clip and safety clip PP black, UV resistant, bolts galvanized
Accidental opening of the safety clip is not possible
Minimum order quantity: standard packaging SP or gross packaging GP
Clip and safety clip are not assembled in the packaging.
d

[inch] [mm]

Code

3 90 167 060 038
4
167 060 064
5 140 167 060 041
6
167 060 067
8
167 060 070

kg

0.163
0.179
0.309
0.348
0.612

kg/m

0.163
0.179
0.309
0.348
0.612

D

L

[mm] [mm]

9
9
11
11
13

L1

[mm]

H

[mm]

89 71 105
100 82 120
121 98 130
136 111 148
165 132 175

H1

H2

[mm] [mm]

15
15
20
25
25

SC

33 M 8
33 M 8
35 M10
35 M 10
39 M 12

143

Solvent and Tools
99 29 80

Tangit ABS solvent cement
•

0,65 kg can (net)

Code

kg

Description

0.751 tin: 0.65 kg

799 298 022

Tangit cleaner
Model:
• 1 litre tin
Code

kg

90 10 90

kg/m

0.868 0.868

799 298 010

PPC Plastic pipe cutter
• For cutting plastic pipes d10 - d160
d-d

Article

[mm]

Code

10 - 63 PPC 63, s max. = 7.2mm
50 - 110 PPC 110, s max. = 12.7mm
110 - 160 PPC 160, s max. = 19.0mm

90 30 90

kg

kg/m

0.710 0.710
1.400 1.400
1.880 1.880

790 109 001
790 109 002
790 109 003

Chamfering tools
• Chamfering tool (15° bevel) for plastic pipes (PVC, ABS, PB, PP, PE). Coated prism surface suitable for clean room applications. Fast and reliable adjustment to the different pipe diameters and wall thickness.
d-d

[mm]

Code

16 - 200 790 309 003
63 - 400 790 309 004

kg

kg/m

1.100 1.100
2.500 2.500

Round brush
d-d

Code

[mm]

6 - 10
12 - 32

kg

4 mm (for Fittings 6-10mm) 799 299 001
8 mm (for Fittings 12-32mm) 799 299 002

kg/m

0.005 0.005
0.009 0.009

Flat brush
d-d

[mm]

40 - 63
75 - 225
250 - 400

144

Code

25x3 mm (for Fittings 40-63mm) 799 299 003
50x5 mm (for Fittings 75-225mm) 799 299 004
75x6 mm (for Fittings 250-400mm) 799 299 005

kg

kg/m

0.015 0.015
0.026 0.026
0.045 0.045

Backing Flanges & Gaskets
24 70 14

Backing Flange, Galvanised Steel
for Socket Systems
Model:
• Galvanised steel, suitable for laying underground
• Connecting dimensions: BS10:1962
• Bolt circle Table D &E
AL: number of holes
* Table D
** Table E
d

DN

[mm]

[mm]

20
25
32
40
50

d

[inch]

1∕2
15
3∕4
20
25
1
32 1 1∕4
40 1 1∕2

PN

kg

724 701 406
724 701 407
724 701 408
724 701 409
724 701 410

0.220
0.320
0.410
0.820
1.040

63 50
2 16 724 701 411
75 65 2 1∕2 16 724 701 412
90 80
3 16 724 701 413
** 110 100
16 724 703 414
* 100
4 16 724 701 414

1.220
1.200
1.530
1.840
1.840

** 100
140 125
160
225 200
d

DN

[mm]

[mm]

20
25
32
40
50

16
16
16
16
16

Code

4 16 724 701 415
5 16 724 701 416
6 16 724 701 417
8 6 724 701 419
d

D

[inch] [mm]

1∕2
15
3∕4
20
25
1
32 1 1∕4
40 1 1∕2

[mm]

[mm]

D3

H

[mm] [mm]

AL SC

15
15
15
15
15

7
7
7
8
8

4
4
4
4
4

M12x55
M12x60
M12x60
M12x70
M12x75

63 50
2 153 115 78
75 65 2 1∕2 165 127 92
90 80
3 184 146 110
** 110 100
216 178 133
* 100
4 216 178 138

18
18
18
18
18

8
8
8
8
8

4
4
4
8
4

M16x80
M16x85
M16x90
M16x95
M16x95

18
18
22
22

8
8
8
8

8 M16x95
8 M16x110
8 M20x120
8 M20x150

4
5
6
8

216
254
280
337

67
73
83
88
99

D2

28
34
42
51
62

** 100
140 125
160
225 200

96
102
115
121
134

D1

1.840
2.070
2.330
2.750

178
210
235
292

138
167
200
250

145

24 70 16

Backing Flanges for socket sysems - all materials
Model:
• Galvanised steel, suitable for laying underground
• Connecting dimension: ISO 7005, EN 1092, BS 4504, DIN 2501
• Bolt circle PN10/16
AL: number of holes
*Bolt circle PN16
d

DN

[mm]

d

[mm]

20
25
32
40
50

[inch]

1∕2
15
3∕4
20
25
1
32 1 1∕4
40 1 1∕2

Code

0.220
0.320
0.410
0.820
1.040

63 50
2 16 724 701 611
75 65 2 1∕2 16 724 701 612
90 80
3 16 724 701 613
110 100
16 724 700 014
100
4 16 724 701 615

1.220
1.440
1.530
1.840
1.620

d

DN

[mm]

20
25
32
40
50

5 16 724 701 616
6 16 724 701 617
8 6 724 701 720
d

[mm]

16
16
16
16
16

kg

724 701 606
724 701 607
724 701 608
724 701 609
724 701 610

140 125
150
* 225 200

D

[inch] [mm]

1∕2
15
3∕4
20
25
1
32 1 1∕4
40 1 1∕2

D1

[mm]

95 65
105 75
115 85
140 100
150 110

D2

[mm]

2.250
2.510
3.000
D3

H

[mm] [mm]

AL SC

28
34
42
51
62

14
14
14
18
18

7
7
7
8
8

4
4
4
4
4

M12x55
M12x60
M12x60
M16x70
M16x75

63 50
2 165 125 78
75 65 2 1∕2 185 145 92
90 80
3 200 160 110
110 100
220 180 133
100
4 220 180 138

18
18
18
18
18

8
8
8
8
8

4
4
4
8
8

M16x80
M16x85
M16x90
M16x95
M16x95

18
22
22

8 8 M16x110
8 8 M20x120
8 12 M20x150

140 125
150
* 225 200

24 70 18

PN

5 250 210 167
6 285 240 200
8 340 295 250

Backing Flanges for socket systems - all materials
Model:
• Galvanised steel, suitable for laying underground
• Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS
1560, BS EN 1759
• Bolt circle Class 150
AL: number of holes
d

[mm]

20
25
32
40
146

DN

[mm]

d

[inch]

1∕2
15
3∕4
20
25
1
32 1 1∕4

PN

16
16
16
16

Code

724 701 806
724 701 807
724 701 808
724 701 809

table continued next page

kg

0.230
0.300
0.350
0.480

d

[mm]

DN

50

[inch]

PN

Code

kg

40 1 1∕2 16 724 701 810

0.650

63 50
2 16 724 701 811
75 65 2 1∕2 16 724 701 812
90 80
3 16 724 701 813
110 100
16 724 703 814
100
4 16 724 701 815

0.990
1.200
1.310
2.011
1.890

140 125
150
225 200

2.000
1.950
3.160

d

[mm]

DN

5 16 724 701 816
6 16 724 701 817
8 6 724 701 820
d

[mm]

20
25
32
40
50

27 70 04
27 70 05

d

[mm]

D

D1

[inch] [mm]

[mm]

1∕2
15
89
3∕4
20
98
25
1 108
32 1 1∕4 117
40 1 1∕2 127

60
70
79
89
98

D2

[mm]

D3

H

[mm] [mm]

AL SC

28
34
42
51
62

16
16
16
16
16

7
7
7
8
8

4
4
4
4
4

M12x55
M12x60
M12x60
M12x70
M12x75

63 50
2 152 121 78
75 65 2 1∕2 178 140 92
90 80
3 190 152 110
110 100
229 190 133
100
4 229 190 138

19
19
19
19
19

8
8
8
8
8

4
4
4
8
8

M16x80
M16x85
M16x90
M16x95
M16x95

140 125
150
225 200

22
22
22

8 8 M20x120
8 8 M20x120
8 8 M20x150

5 254 216 167
6 279 241 200
8 343 298 250

Backing Flanges, PP-V
For socket systems metric
Model:
Modern full-plastic flange PP-GF (30 % glass-fibre reinforced)
With V-groove which applies force evenly on collar
With integrated bolt retainers as an assembly aid
UV-resistant. Applicable for outside applications
Connecting dimension: ISO 7005, EN 1092, BS 4504, DIN 2501
Bolt circle PN 10

•
•
•
•
•
•

AL: number of holes
d

[mm]

Inch DN

[mm]

PN

Code

LVI

kg

20
25
32
40
50

15
20
25
32
40

16
16
16
16
16

727 700 406
727 700 407
727 700 408
727 700 409
727 700 410

183 38 09
183 38 10
183 38 11
183 38 12
183 38 13

0.080
0.100
0.140
0.220
0.210

63
75
90
110
140

50
65
80
100
125

16
16
16
16
16

727 700 411
727 700 412
727 700 413
727 700 414
727 700 416

183 38 14
183 38 15
183 38 16
183 38 17
183 38 18

0.380
0.480
0.520
0.680
0.800

160
200
225

6 150 16 727 700 417
200 16 727 700 419
8 200 16 727 700 420

table continued next page

183 38 19 1.200
183 38 20 1.500
183 38 21 1.400
147

d

[mm]

Inch DN

[mm]

250
280
315
d

[mm]

20
25
32
40
50

27 70 14
27 70 15

PN

Code

LVI

250 16 727 700 421
250 16 727 700 422
300 16 727 700 423
D

[mm]

D1

[mm]

95 65
105 75
115 85
140 100
150 110

D2

[mm]

D3

H

183 38 22 1.700
183 38 23 1.700
183 38 24 2.400

AL SC

[mm] [mm]

28
34
42
51
62

14
14
14
18
18

16
17
18
20
22

4
4
4
4
4

M12
M12
M12
M16
M16

4
4
8
8
8

M16
M16
M16
M16
M16

63
75
90
110
140

165
185
200
220
250

125 78
145 92
160 110
180 133
210 167

18
18
18
18
18

24
26
27
28
30

160
200
225
250
280
315

285
340
340
395
395
445

241
296
295
350
350
400

22
22
22
22
22
22

32 8 M20
34 8 M20
34 8 M20
38 12 M20
38 12 M20
42 12 M20

190
226
250
277
310
348

kg

Backing Flanges, PP-V
For socket systems Inch ANSI
Model:
Modern full-plastic flange PP-GF (30 % glass-fibre reinforced)
With V-groove which applies force evenly on collar
With integrated bolt-fixing as an assembly aid
UV-resistant. Applicable for outside applications
Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS
1560, BS EN 1759
• Bolt circle class 150
•
•
•
•
•

• DN100 and DN150: only for use with original metric flange adaptors
¹) Suitable for socket- and butt fusion systems (no pictograph on flange)
AL: number of holes
Inch
¹ 1∕2
¹ 3∕4
¹1

¹ 1 1∕4
¹ 1 1∕2
¹2

¹ 2 1∕2

3
4
6
10
12

148

DN

[mm]

PN

Code

LVI

kg

kg/m

15
20
25
32
40

16
16
16
16
16

727 701 406
727 701 407
727 701 408
727 701 409
727 701 410

0.080
0.100
0.140
0.220
0.210

0.080
0.100
0.140
0.220
0.210

50
65
80
100
150
250
300

16
16
16
16
16
16
16

727 701 411
727 701 412
727 701 413
727 701 414
727 700 417
727 701 422
727 701 423

0.380
0.480
0.520
0.680
183 38 19 1.200
1.700
2.400

0.380
0.480
0.520
0.680
1.200
1.700
2.400

table continued next page

Inch

D

[mm]

95
105
¹ 1 115
¹ 1 1∕4 140
¹ 1 1∕2 150
¹ 1∕2
¹ 3∕4

¹2

¹ 2 1∕2

3
4
6
10
12

27 70 02

165
185
200
229
285
406
483

D1

[mm]

D2

D3

[mm]

H

[mm] [mm]

AL SC

60
70
79
89
98

28
34
42
51
62

16
16
16
16
16

16
17
18
20
22

4
4
4
4
4

M12
M12
M12
M16
M16

121
140
152
190
241
362
432

78
92
110
133
190
310
348

19
19
19
19
22
26
26

24 4 M16
26 4 M16
27 4 M16
28 8 M16
32 8 M20
38 12 M20
42 12 M20

Backing flange PP-Steel
For socket systems metric
Model:
PP-GF (30% glass-fibre reinforced) with steel ring
UV-resistant. Applicable for outside applications
Connecting dimension: ISO 7005, EN 1092, BS 4504, DIN 2501
Bolt circle PN 10

•
•
•
•

¹ Connecting dimension: ISO 2536, bolt circle acc. DN125, suitable for flange
adaptor d125/DN100
² Connecting dimension: ISO 2536, bolt circle acc. DN225, suitable for flange
adaptor d250/DN250
AL: number of holes
d

[mm]

d

DN

[inch] [mm]

PN

Code

kg

20
25
32
40
50

15
20
25
32
40

16
16
16
16
16

727 700 206
727 700 207
727 700 208
727 700 209
727 700 210

0.220
0.260
0.430
0.650
0.820

63
75
90
110
¹ 125

50
65
80
100
125

16
16
16
16
16

727 700 211
727 700 212
727 700 213
727 700 214
727 700 215

0.940
1.300
1.400
1.560
2.590

140
160
200
225
² 250

125
6 150
200
200
225

16
16
16
16
16

727 700 216
727 700 217
727 700 219
727 700 220
727 700 221

2.120
3.390
5.850
4.410
8.340

280
315
355
400

250
300
350
400

16
16
16
16

727 700 222
727 700 223
727 700 224
727 700 225

5.520
7.600
13.960
17.380

table continued next page

149

d

D

[mm]

20
25
32
40
50

27 70 12

D1

[mm]

D2

[mm]

[mm]

95 65
105 75
115 85
140 100
150 110

D3

H

[mm] [mm]

AL SC

28
34
42
51
62

14
14
14
18
18

12
12
16
16
20

4
4
4
4
4

M12
M12
M12
M16
M16

63
75
90
110
¹ 125

165
185
200
220
250

125 78
145 92
160 110
180 133
210 150

18
18
18
18
18

20
20
20
20
24

4
4
8
8
8

M16
M16
M16
M16
M16

140
160
200
225
² 250

250
285
340
340
395

210
240
295
295
325

167
190
226
250
277

18
22
22
22
22

24
24
27
27
30

8
8
8
8
8

M16
M20
M20
M20
M20

280
315
355
400

395
445
515
574

350
400
460
515

310
348
388
442

22
22
23
26

30
34
40
40

12
12
16
16

M20
M20
M20
M24

Backing flange PP-Steel
For socket systems Inch/ANSI
Model:
For Flange Adaptors BS/ANSI
Material: PP (30 % glass-fibre reinforced) with steel ring
UV-resistant. Applicable for outside applications
Connecting dimension: ANSI/ASME B 16.5 class 150, ASTM D 4024, BS
1560, BS EN 1759
• Bolt circle class 150
•
•
•
•

• DN100 and DN150: only for use with original metric flange adaptors
AL: number of holes
d

DN

[inch] [mm]

Code

kg

kg/m

0.210
0.250
0.420
0.670
0.860

0.210
0.250
0.420
0.670
0.860

2 50 63 16
2 1∕2 65 75 16
3 80 90 16
4 100 110 16
6 150 160 16
8 200 200 16

727 701 211
727 701 212
727 701 213
727 701 214
727 700 217
727 701 220

0.930
1.340
1.550
1.810
3.390
4.410

0.930
1.340
1.550
1.810
3.390
4.410

1
1 1∕4
1 1∕2

d

D1

[inch] [mm]
1∕2
3∕4

1
1 1∕4

60
70
79
89

20
25
32
40
50

PN

727 701 206
727 701 207
727 701 208
727 701 209
727 701 210

3∕4

150

[mm]

16
16
16
16
16

1∕2

15
20
25
32
40

d

D2

[mm]

28
34
42
51

D3

D

[mm] [mm]

16 95
16 105
16 115
16 140

table continued next page

H

[mm]

12
12
16
16

AL

4
4
4
4

d

D1

D2

[inch] [mm]

1 1∕2

EPDM 48 41 00
FPM 49 41 00

D3

[mm]

D

[mm] [mm]

98

62

2 121
2 1∕2 140
3 152
4 190
6 240
8 298

78
92
110
133
190
250

H

[mm]

AL

16 150

18 4

19
19
19
19
22
22

18
18
20
20
24
27

165
185
200
229
285
340

4
4
4
8
8
8

O-Ring gasket
Model:
•
•
•
•

For unions and adaptor unions
Hardness approx. 65° Shore
EPDM minimum temperature -40°C
FPM minimum temperature -15°C

* for unions PVC-U, PVC-C and ABS: 21 51 01, 21 51 11, 21 53 03, 21 53 08,
21 55 04, 21 55 13, 21 55 18, 23 51 01 and 29 51 01 only
d

DN

EPDM
Code

FPM
Code

8
10
15
20
25

748 410 004
748 410 005
748 410 006
748 410 007
748 410 008

749 410 004
749 410 005
749 410 006
749 410 007
749 410 008

0.002
0.002
0.002
0.002
0.002

0.002
0.002
0.002
0.002
0.002

12
16
20
28
33

2.62
2.62
3.53
3.53
3.53

40 32
50 40
63 50
75 65
90 80
110 100

748 410 009
748 410 010
748 410 011
748 410 014
748 410 015
748 410 016

749 410 009
749 410 010
749 410 011
749 410 014
749 410 015
749 410 016

0.006
0.007
0.010
0.012
0.015
0.031

0.006 51 41
0.007 58 47
0.010 70 60
0.012 93 82
0.015 112 101
0.031 134 120

5.34
5.34
5.34
5.34
5.34
6.99

[mm]

[mm]

10 - 12
16
20
25
32

EPDM 48 40 00
FPM 49 40 00

kg

kg/m

D

[mm]

D1

[mm]

18
21
27
35
40

D2

[mm]

Flat gasket
Model:
• Hardness approx. 65° Shore
• For adaptor unions
d

[mm]

12
16
20
25
32

Inch EPDM
Code

FPM
Code

kg

kg/m

D

[mm]

D1

H

[mm] [mm]

748 400 004
748 400 005
1∕2 748 400 006
3∕4 748 400 007
1 748 400 008

749 400 005
749 400 006
749 400 007
749 400 008

0.002
0.002
0.003
0.004
0.002

0.002
0.002
0.003
0.004
0.002

20
24
30
38
44

13
17
21
27
32

2
2
3
3
3

40 1 1∕4 748 400 009
50 1 1∕2 748 400 010
63
2 748 400 011
75 2 1∕2 748 400 012
90
3 748 400 013

749 400 009
749 400 010
749 400 011
749 400 012
749 400 013

0.003
0.004
0.006
0.009
0.011

0.003 55
0.004 62
0.006 78
0.009 97
0.011 109

42
46
60
75
88

3
3
3
3
3

1∕4
3∕8

151

EPDM 48 40 00
FPM 49 40 00

Flat Gaskets
Model:
• For Flange Adaptors 21 79 01/21 80 01
• Hardness: 70° Shore EPDM, 75° Shore FPM
d

[mm]

DN

[mm]

16
20
25
32
40
63
75
90
110
140
160
225
d

[mm]

152

Inch PN

3∕8
10
1∕2
15
3∕4
20
25
1
32 1 1∕4

10
10
10
10
10

EPDM
Code

FPM
Code

748 400 014
748 400 015
748 400 016
748 400 017
748 400 018

749 400 015
749 400 016
749 400 017
749 400 018

50
2 10 748 400 020
65 2 1∕2 10 748 400 021
80
3 10 748 400 022
100
4 10 748 400 023
125
5 10 748 400 025
150
6 10 748 400 026
200
8 6 748 400 027
D

[mm]

D1

[mm]

H

[mm]

16
20
25
32
40

27
32
39
48
59

16
20
25
32
40

2
2
2
2
3

63
75
90
110
140
160
225

88
104
123
148
186
211
272

63
75
90
110
140
160
220

3
3
3
4
4
4
5

749 400 020
749 400 021
749 400 022
749 400 025
749 400 026
749 400 027

kg

kg/m

0.002
0.003
0.003
0.004
0.008

0.002
0.003
0.003
0.004
0.008

0.017
0.024
0.032
0.015
0.058
0.063
0.103

0.017
0.024
0.032
0.048
0.058
0.063
0.103

EPDM 48 40 03

Flat gasket
Model:
•
•
•
•

For all metric GF Flange Adaptors
Hardness approx. 65° Shore
Integrated fixation aids from d110
Centering on the inner diameter of the screw crown

di FA are the suitable inner diameters of flange adaptors
d

DN

[mm]

[mm]

16
20
25
32
40

PN

Type EPDM
Code

kg

kg/m

10
15
20
25
32

10
10
10
10
10

A
A
A
A
A

748 400 305
748 400 306
748 400 307
748 400 308
748 400 309

0.005
0.010
0.020
0.025
0.030

0.005
0.010
0.020
0.025
0.030

50 40
63 50
75 65
90 80
110 100

10
10
10
10
10

A
A
A
A
B

748 400 310
748 400 311
748 400 312
748 400 313
748 400 314

0.035
0.040
0.045
0.050
0.032

0.035
0.040
0.045
0.050
0.032

100 10 B
125 10 B
150 10 B
200 6 C
200 6 C

748 400 315
748 400 316
748 400 317
748 400 319
748 400 320

0.058
0.062
0.068
0.075
0.079

0.058
0.062
0.068
0.075
0.079

748 400 321
748 400 322
748 400 323

0.103 0.103
0.150 0.150
0.230 0.230

125
140
160 / 180
200
225

250 250
280 250
315 300
d

DN

[mm]

[mm]

16
20
25
32
40

10
15
20
25
32

6 C
6 C
6 C
D

[mm]

[mm]

D2

[mm]

D3

H

di FA

[mm] [mm] [mm]

16
20
25
32
40

2
2
2
2
3

6 - 26
10 - 30
15 - 35
22 - 42
30 - 50

92 50
107 63
127 71
142 84
162 104 180

18

3
3
3
3
4

40 - 60
53 - 73
61 - 81
74 - 94
94 - 114

162
192
218
273
273

180
210
241
295
295

18
18
22
22
22

4
4
4
5
5

109 - 129
124 - 144
145 - 165
185 - 205
206 - 226

250 250 328 250 350
280 250 328 273 350
315 300 378 305 400

22
22
22

5
5
5

240 - 260
263 - 283
295 - 315

50 40
63 50
75 65
90 80
110 100
125
140
160 / 180
200
225

100
125
150
200
200

46
51
61
71
82

D1

119
134
155
195
216

153

EPDM 48 44 07
FPM 49 44 07

Profile flange gasket metric
Model:
•
•
•
•
•
•

For all metric GF Flange Adaptors
Profile Gasket with steel insert (type G-ST-P/K)
Hardness: 70° Shore EPDM, 75° Shore FPM
EPDM: approved acc. to DVGW W 270, KTW recommendation
Centering on the inner diameter of the screw crown
material steel insert: carbon steel

di FA are the suitable inner diameters of flange adaptors
d

DN

[mm]

[mm]

16
20
25
32
40

EPDM
Code

FPM
Code

kg

10
15
20
25
32

16
16
16
16
16

748 440 705
748 440 706
748 440 707
748 440 708
748 440 709

749 440 705
749 440 706
749 440 707
749 440 708
749 440 709

0.007
0.008
0.011
0.014
0.021

50 40
63 50
75 65
90 80
110 100

16
16
16
16
16

748 440 710
748 440 711
748 440 712
748 440 713
748 440 714

749 440 710
749 440 711
749 440 712
749 440 713
749 440 714

0.022
0.041
0.055
0.062
0.085

125
140
160 / 180
200
225

100
125
150
200
200

16
16
16
16
16

748 440 715
748 440 716
748 440 717
748 440 719
748 440 720

749 440 715
749 440 716
749 440 717
749 440 719
749 440 720

0.158
0.118
0.153
0.263
0.181

250
280
315
355
400

250
250
300
350
400

16
16
16
16
16

748 440 721
748 440 722
748 440 723
748 440 724
748 440 725

749 440 721
749 440 722
749 440 723
749 440 724
749 440 725

0.410
0.226
0.334
0.410
0.513

450
500
560
630

500
500
600
600

16
16
16
16

748 440 726
748 440 727
748 440 728
748 440 729

749 440 726
749 440 727
749 440 728
749 440 729

0.718
0.718
0.923
0.923

d

DN

[mm]

[mm]

16
20
25
32
40

10
15
20
25
32

50 40
63 50
75 65
90 80
110 100
125
140
160 / 180
200
225

154

PN

100
125
150
200
200

D

[mm]

46
51
61
71
82

D1

[mm]

H

H1

di FA

[mm] [mm] [mm]

16
20
22
28
40

4
4
4
4
4

3
3
3
3
3

6 - 16
10 - 20
12 - 22
18 - 28
30 - 40

92 46
107 58
127 69
142 84
162 104

4
5
5
5
6

3
4
4
4
5

36 - 46
48 - 58
59 - 69
73 - 84
94 - 104

162
192
218
273
273

6
6
8
8
8

5
5
6
6
6

113 - 123
127 - 137
150 - 160
192 - 203
207 - 220

123
137
160
203
220

table continued next page

d

DN

[mm]

48 40 10

[mm]

D

[mm]

D1

H

[mm]

H1

di FA

[mm] [mm] [mm]

250
280
315
355
400

250
250
300
350
400

328
328
378
438
489

252
274
306
355
400

8
8
8
10
10

6
6
6
7
7

238 - 252
264 - 274
296 - 306
340 - 355
385 - 400

450
500
560
630

500
500
600
600

594
594
695
695

403
447
494
555

10
10
10
10

7
7
7
7

393 - 403
437 - 447
484 - 494
545 - 555

Flat Gaskets for Full Face Flanges
Drilled to BS4504 PN10/16
Model:
• For Flange Adaptors
• Hardness approx. 65° Shore
Inch EPDM
Code

FPM
Code

kg

748 401 006
748 401 007
1 748 401 008
1 1∕4 748 401 109 749 401 109
1 1∕2 748 401 110 749 401 110
1∕2
3∕4

2
3
4
6

748 401 111 749 401 111
748 401 113 749 401 113
748 401 014
748 401 117 749 401 117

Inch D

[mm]

95
3∕4
105
1 115
1 1∕4 140
1 1∕2 150

48 40 10

d

[mm]

k

[mm]

c

[mm]

0.031
0.037
0.037

0.112

no. of holes h

[mm]

1∕2

17 67
22 73
28 83
36 100
45 110

15
15
15
18
18

4
4
4
4
4

3
3
3
3
3

2
3
4
6

165 58 125
200 83 160
220 109 178
285 161 240

18
18
18
22

4
8
8
8

3
3
3
3

Flat Gaskets for Full Face Flanges
Drilled to BS10 tables D and E
Model:
• For Flange Adaptors
• Hardness approx. 65° Shore
Inch
1∕2
3∕4

1
1 1∕4
1 1∕2

EPDM
Code

FPM
Code

748 401 006
748 401 007
748 401 008
748 401 009
748 401 010

749 401 006
749 401 007
749 401 008
749 401 009
749 401 010

table continued next page

kg

0.003
0.004
0.004
0.003
0.004

kg/m

0.003
0.004
0.004
0.003
0.004
155

Inch

EPDM
Code

FPM
Code

2
748 401 011
3
748 401 013
4 Table E 748 401 014
* 4 Table D 748 401 064
6
748 401 017
Inch

D

[mm]

[mm]

95
105
115
140
150

[mm]

c

[mm]

0.020

no. of holes h

[mm]

4
4
4
4
4

3
3
3
3
3

2
165 58 115
3
200 83 146
4 Table E 220 109 178
* 4 Table D 220 109 178
6
285 161 235

18
18
18
18
22

4
4
8
4
8

3
3
3
3
3

1
1 1∕4
1 1∕2

Flat Gaskets for Full Face Flanges
Drilled to ANSI B16.5 Class 150
Model:
• For Flange Adaptors
• Hardness approx. 65° Shore
Inch EPDM
Code

FPM
Code

kg

748 401 206 749 401 206
748 401 207 749 401 207
1 748 401 208 749 401 208
1 1∕4 748 401 009
1 1∕2 748 401 010

kg/m

1∕2
3∕4

2 748 401 211 749 401 211
3 748 401 213 749 401 213
4 748 401 214 749 401 214
Inch D

[mm]

95
3∕4
105
1 115
1 1∕4 140
1 1∕2 150

d

[mm]

17
22
28
36
45

k

[mm]

c

[mm]

0.041
0.055

0.112 0.112

no. of holes h

[mm]

60
70
79
88
98

16
16
16
15
15

4
4
4
4
4

3
3
3
3
3

2 165 58 121
3 200 83 152
4 220 109 190

19
19
19

4
4
8

3
3
3

1∕2

156

0.105
0.011
0.015

15
15
15
15
15

3∕4

17
22
28
36
45

0.105
0.011
0.015
0.112
0.020

749 401 011
749 401 013
749 401 014
749 401 064
749 401 017

k

kg/m

67
73
83
88
98

1∕2

48 40 10

d

kg

Index
Code
158 001 041
158 001 042
158 001 043
158 001 044
158 001 045
158 001 046
158 001 047
158 001 048
158 001 049
158 001 050
158 001 051
158 001 052
158 001 053
158 001 054
158 001 055
158 001 056
158 001 057
158 001 058
158 001 059
158 001 060
158 001 061
158 001 062
158 001 063
158 001 064
158 001 065
158 001 066
158 001 067
158 001 068
158 001 069
158 001 070
158 001 071
158 001 072
158 001 073
158 001 074
158 001 075
158 001 076
158 001 077
158 001 078
158 001 079
158 001 080
158 001 081
158 001 082
158 001 083
158 001 084
158 001 085
158 001 086
158 001 087
158 001 088
158 001 089
158 001 090
158 001 091

Page
88
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
45
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46

Code
158 001 092
158 001 093
158 001 094
158 001 095
158 001 096
158 001 097
158 001 098
158 001 099
158 001 100
158 001 101
158 001 102
158 001 103
158 001 104
158 001 105
158 001 106
158 001 107
158 001 108
158 001 109
158 001 110
158 001 111
158 001 112
158 001 113
158 001 114
158 001 115
158 001 116
158 001 117
158 001 118
158 001 119
158 001 120
158 001 121
158 001 122
158 001 123
158 001 124
161 305 303
161 305 336
161 305 337
161 305 338
161 305 339
161 305 353
161 305 386
161 305 387
161 305 388
161 305 389
161 305 403
161 305 436
161 305 437
161 305 438
161 305 439
161 305 453
161 305 486
161 305 487
161 305 488

Page
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
46
47
47
47
47
47
47
47
47
47
47
47
47
47
47
47
120
118
118
117
117
120
118
118
117
117
120
118
118
117
117
120
118
118
117

Code
161 305 489
161 305 503
161 305 536
161 305 537
161 305 538
161 305 539
161 305 553
161 305 586
161 305 587
161 305 588
161 305 589
161 305 603
161 305 604
161 305 636
161 305 637
161 305 638
161 305 639
161 305 653
161 305 654
161 305 686
161 305 687
161 305 688
161 305 689
161 330 304
161 330 354
161 330 404
161 330 454
161 330 504
161 330 554
161 330 654
161 480 141
161 480 158
161 480 231
161 480 232
161 480 233
161 480 237
161 480 238
161 480 239
161 480 240
161 480 241
161 480 242
161 481 028
161 481 029
161 481 030
161 481 098
161 481 099
161 481 100
161 481 759
161 481 760
161 481 932
161 482 017
161 482 018

Page
117
120
118
118
117
117
120
118
118
117
117
120
121
118
118
117
117
120
121
118
118
117
117
114
114
114
114
114
114
114
115
116
92
92
92
92
92
92
92
92
92
92
92
92
92
92
92
93
93
92
122
122
157

Index
Code
161 482 019
161 482 020
161 482 021
161 482 022
161 482 408
161 482 514
161 482 515
161 482 516
161 482 517
161 482 910
161 482 911
161 482 912
161 482 913
161 482 914
161 482 915
161 483 008
161 483 009
161 483 020
161 483 021
161 483 032
161 483 033
161 483 034
161 483 126
161 483 127
161 483 128
161 483 129
161 483 130
161 483 131
161 483 132
161 483 133
161 483 259
161 483 260
161 483 261
161 483 262
161 483 263
161 483 264
161 483 462
161 484 458
161 484 459
161 484 460
161 484 631
161 484 638
161 484 694
161 484 702
161 486 100
161 486 101
161 486 102
161 486 103
161 486 104
161 486 105
161 486 106
161 486 107
158

Page
122
122
122
122
110
92
92
92
92
116
116
116
116
116
116
92
92
92
92
93
93
93
119
119
119
119
119
119
119
119
115
115
115
115
115
115
110
92
92
92
92
92
92
92
118
118
118
118
118
118
118
118

Code
161 486 325
161 486 326
161 486 327
161 486 328
161 486 400
161 486 401
161 486 402
161 486 403
161 486 404
161 486 405
161 486 406
161 486 407
161 486 408
161 486 435
161 486 436
161 486 437
161 486 438
161 486 443
161 486 444
161 486 445
161 486 446
161 486 689
161 486 690
161 486 691
161 486 694
161 486 695
161 486 697
161 486 899
161 486 900
161 486 901
161 486 902
161 486 903
161 486 904
161 486 905
161 486 906
161 486 907
161 486 908
161 486 909
161 486 926
161 486 927
161 486 928
161 486 959
161 486 960
161 486 961
161 486 962
161 486 963
161 486 964
161 486 965
161 486 966
161 486 967
161 488 242
161 488 243

Page
109
110
110
110
75
75
75
75
75
75
76
76
76
68
68
68
68
57
57
57
57
57
57
57
110
110
110
109
109
109
109
109
109
109
109
109
109
109
109
109
109
108
108
108
108
108
108
108
108
108
78
78

Code
161 488 244
161 488 245
161 488 246
161 488 247
161 490 920
161 490 921
163 481 102
163 481 103
163 481 104
163 481 105
163 481 106
163 481 107
167 060 019
167 060 020
167 060 021
167 060 022
167 060 023
167 060 024
167 060 025
167 060 038
167 060 039
167 060 040
167 060 041
167 060 042
167 060 043
167 060 064
167 060 067
167 060 070
167 061 003
167 061 004
167 061 012
167 061 013
167 061 014
167 061 015
167 061 016
167 061 017
167 061 035
167 061 036
167 061 037
167 061 038
167 061 039
167 061 040
167 061 041
167 061 054
167 061 055
167 061 056
167 061 057
167 061 058
167 061 059
167 061 060
167 061 061
167 061 114

Page
78
78
78
78
68
68
120
120
120
120
120
120
143
143
143
143
143
143
143
143
143
143
143
143
143
143
143
143
141
141
140
140
141
141
140
141
141
141
141
141
141
141
141
140
140
140
140
140
140
140
140
140

Index
Code
167 061 153
167 061 155
167 061 156
167 061 157
167 061 158
167 061 159
167 061 160
167 061 161
167 061 162
167 061 163
167 061 164
167 061 165
167 061 166
167 061 167
167 305 001
167 305 002
167 305 003
167 305 004
167 305 005
167 305 006
167 305 020
167 305 021
167 305 022
167 305 023
167 305 024
167 305 025
167 305 030
167 305 031
167 305 032
167 305 033
167 305 034
167 305 035
167 305 040
167 305 041
167 305 042
167 305 043
167 305 044
167 305 045
167 480 024
167 480 025
167 480 026
167 480 027
167 480 028
167 480 029
167 481 165
167 481 166
167 481 167
167 481 168
167 481 169
167 481 170
167 482 479
167 482 480

Page
140
140
140
140
140
140
140
140
140
140
141
141
141
141
119
119
119
119
119
119
120
120
120
120
120
120
121
121
121
121
121
121
120
120
120
120
120
120
114
114
114
114
114
114
114
114
114
114
114
114
78
78

Code
167 482 481
167 482 482
167 482 626
167 482 627
167 482 628
167 482 629
167 482 630
167 482 631
167 482 635
167 482 636
167 482 637
167 482 638
167 482 639
167 482 640
167 482 653
167 482 654
167 482 655
167 482 656
167 482 657
167 482 658
167 482 662
167 482 663
167 482 664
167 482 665
167 482 666
167 482 667
167 482 671
167 482 672
167 482 673
167 482 674
167 482 675
167 482 676
167 482 680
167 482 681
167 482 682
167 482 683
167 482 684
167 482 685
167 483 251
167 483 252
167 483 253
167 483 254
167 484 076
167 484 077
167 484 078
167 484 079
167 484 080
167 484 081
167 484 082
167 484 083
167 484 084
167 484 088

Page
78
78
69
69
69
69
69
69
70
70
70
70
70
70
72
72
72
72
72
72
72
72
72
72
72
72
71
71
71
71
71
71
70
70
70
70
70
70
109
109
109
109
75
75
75
75
75
75
75
75
75
75

Code
167 484 089
167 484 090
167 484 091
167 484 092
167 484 093
167 484 094
167 484 095
167 484 096
167 484 100
167 484 101
167 484 102
167 484 103
167 484 104
167 484 105
167 484 110
167 484 111
167 484 376
167 484 377
167 484 378
167 484 379
167 484 380
167 484 381
167 484 442
167 484 443
167 484 444
167 484 445
167 484 446
167 484 447
167 484 488
167 484 489
167 484 490
167 484 491
167 484 492
167 484 493
167 484 542
167 484 543
167 484 544
167 484 545
167 484 546
167 484 547
167 484 576
167 484 577
167 484 578
167 484 579
167 484 580
167 484 581
167 484 588
167 484 589
167 484 590
167 484 591
167 484 592
167 484 593

Page
75
75
75
75
75
75
75
75
57
57
57
57
57
57
69
69
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
77
159

Index
Code
167 484 642
167 484 643
167 484 644
167 484 645
167 484 646
167 484 647
167 484 688
167 484 689
167 484 690
167 484 691
167 484 692
167 484 693
167 484 742
167 484 743
167 484 744
167 484 745
167 484 746
167 484 747
167 484 788
167 484 789
167 484 790
167 484 791
167 484 792
167 484 793
167 484 941
167 484 942
167 484 943
167 484 944
167 484 945
167 484 946
167 484 947
167 484 948
167 484 992
167 484 993
167 484 994
167 484 995
167 484 996
167 484 997
169 017 080
169 017 081
169 017 082
169 017 083
169 017 084
169 017 085
169 017 086
169 017 087
169 017 088
169 017 089
169 017 091
169 017 092
169 017 093
169 017 094
160

Page
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
80
78
78
78
78
81
81
81
81
86
86
86
86
86
86
25
25
25
25
25
25
25
4
25
25
4
25
25
25

Code
169 017 095
169 017 096
169 017 097
169 018 033
169 018 034
169 018 035
169 018 036
169 018 038
169 018 039
169 018 042
169 018 045
169 018 067
169 018 080
169 018 081
169 018 082
169 018 083
169 018 084
169 018 085
169 018 086
169 018 088
169 018 089
169 018 106
169 018 107
169 018 108
169 018 109
169 018 110
169 018 111
169 110 056
169 110 066
169 110 097
169 110 117
169 250 225
169 250 226
169 250 227
169 250 228
169 250 229
169 250 230
169 250 231
169 280 002
169 280 003
169 280 004
169 280 005
169 280 006
169 280 007
169 303 006
169 303 007
169 303 008
169 303 009
169 303 010
169 303 011
169 305 302
169 305 303

Page
25
25
25
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
45
45
45
45
22
22
22
22
22
22
22
14
14
14
14
14
14
111
111
111
111
111
111
117
117

Code
169 305 304
169 305 305
169 305 306
169 305 307
169 317 024
169 317 025
169 317 423
169 360 401
169 360 402
169 360 403
169 360 404
169 360 405
169 360 406
169 360 407
169 360 421
169 360 422
169 360 423
169 360 424
169 360 425
169 360 426
169 360 427
169 360 431
169 360 432
169 360 433
169 360 434
169 360 435
169 360 436
169 360 437
169 360 521
169 360 522
169 360 523
169 360 524
169 360 525
169 360 526
169 360 527
169 360 531
169 360 532
169 360 533
169 360 534
169 360 535
169 360 536
169 360 537
169 480 101
169 480 102
169 480 103
169 480 104
169 480 105
169 480 106
169 480 152
169 480 153
169 480 154
169 480 155

Page
117
117
117
117
84
84
84
113
113
113
113
113
113
113
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
112
115
115
115
115
115
115
115
115
115
115

Index
Code
169 480 156
169 480 157
169 480 158
169 480 250
169 480 251
169 480 252
169 480 253
169 480 254
169 480 255
169 480 256
169 480 282
169 480 283
169 480 600
169 480 601
169 480 602
169 480 603
169 480 604
169 480 605
169 480 609
169 480 610
169 480 611
169 480 612
169 480 613
169 480 614
169 480 751
169 480 752
169 480 753
169 480 754
169 480 755
169 480 756
169 480 757
169 480 758
169 480 759
169 480 900
169 480 901
169 480 902
169 480 903
169 480 904
169 480 905
169 480 906
169 480 907
169 480 908
169 480 951
169 480 952
169 480 953
169 480 954
169 480 955
169 480 956
169 480 957
169 481 067
169 481 068
169 481 069

Page
115
115
115
114
114
114
114
114
114
114
93
93
119
119
119
119
119
119
120
120
120
120
120
120
74
74
74
74
74
74
74
74
74
74
74
74
74
74
74
75
75
75
109
109
109
109
109
109
109
108
108
108

Code
169 481 070
169 481 071
169 481 072
169 481 073
169 481 202
169 481 203
169 481 204
169 481 205
169 481 206
169 481 207
169 481 212
169 481 213
169 481 214
169 481 215
169 481 216
169 481 217
169 481 221
169 481 222
169 481 223
169 481 224
169 481 225
169 481 226
169 481 227
169 481 231
169 481 232
169 481 233
169 481 234
169 481 235
169 481 236
169 481 237
169 481 282
169 481 283
169 481 284
169 481 285
169 481 286
169 481 287
169 481 292
169 481 293
169 481 294
169 481 295
169 481 296
169 481 297
169 481 302
169 481 303
169 481 304
169 481 305
169 481 306
169 481 307
169 481 312
169 481 313
169 481 314
169 481 315

Page
108
108
108
108
76
76
76
76
76
76
76
76
76
76
76
76
79
79
79
79
79
79
79
79
79
79
79
79
79
79
77
77
77
77
77
77
77
77
77
77
77
77
80
80
80
80
80
80
80
80
80
80

Code
169 481 316
169 481 317
169 481 862
169 481 863
169 481 864
169 481 865
169 481 866
169 481 867
169 514 012
169 514 013
169 514 014
169 514 015
169 514 016
169 514 017
169 514 032
169 514 033
169 514 034
169 514 035
169 514 036
169 514 037
169 514 512
169 514 513
169 514 514
169 514 515
169 514 516
169 514 517
169 514 532
169 514 533
169 514 534
169 514 535
169 514 536
169 514 537
169 515 012
169 515 013
169 515 014
169 515 015
169 515 016
169 515 017
169 515 032
169 515 033
169 515 034
169 515 035
169 515 036
169 515 037
169 543 001
169 543 002
169 543 003
169 543 004
169 543 005
169 543 006
169 543 007
169 543 041

Page
80
80
90
90
90
90
90
90
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
82
83
83
83
83
83
83
83
83
83
83
83
83
58
58
58
58
58
58
58
59
161

Index
Code
169 543 042
169 543 043
169 543 044
169 543 045
169 543 046
169 543 047
169 543 061
169 543 062
169 543 063
169 543 064
169 543 065
169 543 066
169 543 067
169 543 201
169 543 202
169 543 203
169 543 204
169 543 205
169 543 206
169 543 207
169 543 241
169 543 242
169 543 243
169 543 244
169 543 245
169 543 246
169 543 247
169 543 261
169 543 262
169 543 263
169 543 264
169 543 265
169 543 266
169 543 267
169 543 302
169 543 303
169 543 304
169 543 305
169 543 306
169 543 307
169 543 322
169 543 323
169 543 324
169 543 325
169 543 326
169 543 327
169 543 401
169 543 402
169 543 403
169 543 404
169 543 405
169 543 406
162

Page
59
59
59
59
59
59
61
61
61
61
61
61
61
62
62
62
62
62
62
62
63
63
63
63
63
63
63
65
65
65
65
65
65
65
60
60
60
60
60
60
64
64
64
64
64
64
66
66
66
66
66
66

Code
169 543 407
169 543 421
169 543 422
169 543 423
169 543 424
169 543 425
169 543 426
169 543 427
169 546 001
169 546 002
169 546 003
169 546 004
169 546 005
169 546 006
169 546 007
169 546 008
169 546 009
169 546 010
169 546 021
169 546 022
169 546 023
169 546 024
169 546 025
169 546 026
169 546 027
169 546 061
169 546 062
169 546 063
169 546 064
169 546 065
169 546 066
169 546 067
169 546 068
169 546 069
169 546 070
169 546 081
169 546 082
169 546 083
169 546 084
169 546 085
169 546 086
169 546 087
169 546 088
169 546 089
169 546 090
169 546 201
169 546 202
169 546 203
169 546 204
169 546 205
169 546 206
169 546 207

Page
66
67
67
67
67
67
67
67
52
52
52
52
52
52
52
49
52
52
54
54
54
54
54
54
54
53
53
53
53
53
53
53
50
53
53
56
56
56
56
56
56
56
51
56
56
49
49
49
49
49
49
49

Code
169 546 209
169 546 210
169 546 221
169 546 222
169 546 223
169 546 224
169 546 225
169 546 226
169 546 227
169 546 229
169 546 230
169 546 241
169 546 242
169 546 243
169 546 244
169 546 245
169 546 246
169 546 247
169 546 249
169 546 250
169 567 002
169 567 003
169 567 004
169 567 005
169 567 006
169 567 007
169 567 008
169 567 022
169 567 023
169 567 024
169 567 025
169 567 026
169 567 027
169 567 028
169 567 802
169 567 803
169 567 804
169 567 805
169 567 806
169 567 807
169 567 808
169 568 002
169 568 003
169 568 004
169 568 005
169 568 006
169 568 007
169 568 008
169 568 022
169 568 023
169 568 024
169 568 025

Page
49
49
51
51
51
51
51
51
51
51
51
50
50
50
50
50
50
50
50
50
97
97
97
97
97
97
97
98
98
98
98
98
98
98
94
94
94
94
94
94
94
101
101
101
101
101
101
101
102
102
102
102

Index
Code
169 568 026
169 568 027
169 568 028
169 568 102
169 568 103
169 568 104
169 568 105
169 568 106
169 568 107
169 568 108
169 568 122
169 568 123
169 568 124
169 568 125
169 568 126
169 568 127
169 568 128
169 568 802
169 568 803
169 568 804
169 568 805
169 568 806
169 568 807
169 568 808
169 568 902
169 568 903
169 568 904
169 568 905
169 568 906
169 568 907
169 568 908
173 061 003
173 061 004
173 061 005
173 061 006
173 061 007
173 061 008
173 061 009
173 061 010
173 061 011
173 061 012
173 061 013
173 061 014
173 061 015
173 061 016
173 061 017
173 061 153
173 061 155
173 061 156
173 061 157
173 061 158
173 061 159

Page
102
102
102
99
99
99
99
99
99
99
100
100
100
100
100
100
100
95
95
95
95
95
95
95
96
96
96
96
96
96
96
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142
142

Code
173 061 160
173 061 161
173 061 162
173 061 163
173 061 164
173 061 165
173 061 166
173 061 167
175 480 153
175 480 154
175 480 155
175 480 156
175 480 157
175 480 158
198 000 599
198 000 621
198 000 622
198 000 872
198 000 873
198 000 874
198 000 875
198 000 876
198 000 877
198 000 880
198 000 881
198 000 882
198 000 883
198 000 884
198 000 885
198 000 886
198 000 892
198 000 893
198 000 894
198 000 895
198 000 896
198 000 897
198 104 166
198 151 742
198 151 743
198 151 744
198 151 745
198 151 746
198 151 747
198 151 752
198 151 753
198 151 754
198 151 755
198 151 756
198 151 757
198 151 762
198 151 763
198 151 764

Page
142
142
142
142
142
142
142
142
114
114
114
114
114
114
110
110
110
88
88
88
88
88
88
110
88
88
88
88
88
88
86
86
86
86
86
86
85
85
85
85
85
85
85
85
85
85
85
85
85
87
87
87

Code
198 151 765
198 151 766
198 151 767
198 151 772
198 151 773
198 151 774
198 151 775
198 151 776
198 151 777
198 151 782
198 151 783
198 151 784
198 151 785
198 151 786
198 151 787
198 151 792
198 151 793
198 151 794
198 151 795
198 151 796
198 151 797
198 151 802
198 151 803
198 151 804
198 151 805
198 151 806
198 151 807
198 151 842
198 151 843
198 151 844
198 151 845
198 151 846
198 151 847
198 151 852
198 151 853
198 151 854
198 151 855
198 151 856
198 151 857
198 204 162
198 204 164
198 204 327
198 204 328
198 204 329
198 335 055
198 335 056
198 335 057
198 335 058
198 335 059
198 335 060
198 335 061
198 335 070

Page
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
87
85
85
85
85
85
85
85
85
85
85
85
85
85
85
86
86
86
132
132
132
132
132
132
132
132
163

Index
Code
198 335 071
198 335 072
198 335 073
198 335 074
198 335 075
198 335 076
198 335 077
198 335 078
198 335 079
198 335 080
198 335 081
198 335 082
198 335 085
198 335 086
198 335 087
198 335 088
198 335 089
198 335 090
198 335 091
198 335 092
198 335 093
198 335 094
198 335 095
198 335 096
198 335 097
198 335 098
198 335 255
198 335 256
198 335 257
198 335 258
198 335 259
198 335 260
198 335 261
198 335 270
198 335 271
198 335 272
198 335 273
198 335 274
198 335 275
198 335 276
198 335 277
198 335 278
198 335 279
198 335 280
198 335 281
198 335 282
198 335 285
198 335 286
198 335 287
198 335 288
198 335 289
198 335 290
164

Page
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
132
134
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133
133

Code
198 335 291
198 335 292
198 335 293
198 335 294
198 335 295
198 335 296
198 335 297
198 335 455
198 335 456
198 335 457
198 335 458
198 335 459
198 335 460
198 335 470
198 335 471
198 335 472
198 335 473
198 335 474
198 335 960
198 335 961
198 335 962
198 335 963
198 335 964
198 335 965
198 335 966
198 335 967
198 335 968
198 335 969
198 335 970
198 335 971
198 335 972
198 335 973
198 335 974
198 335 975
198 335 977
198 335 978
198 335 979
198 335 980
198 335 981
198 335 982
198 335 985
198 335 986
198 335 987
198 335 990
198 335 991
198 335 992
198 335 993
198 335 994
198 335 995
198 801 338
198 801 339
198 801 340

Page
133
133
133
133
133
133
133
134
134
134
134
134
134
134
134
134
134
134
131
131
130
130
130
130
130
130
130
130
133
133
133
133
133
133
133
133
133
133
133
133
134
134
134
134
130
130
130
130
130
136
136
136

Code
198 801 341
198 801 342
198 801 343
198 801 445
198 801 449
198 801 450
198 801 451
198 802 814
198 802 815
198 802 816
198 802 817
198 802 818
198 802 819
198 802 820
198 802 821
198 802 822
198 802 823
198 802 824
198 802 825
198 802 826
198 802 827
198 802 828
198 802 829
198 802 830
198 802 831
198 802 832
198 802 833
198 802 834
198 802 835
198 802 836
198 802 837
198 803 790
198 803 791
198 803 792
198 803 793
198 803 794
198 803 795
198 803 796
198 803 797
198 803 798
198 803 799
198 806 219
198 806 220
198 806 221
198 806 222
198 806 223
198 806 224
198 806 639
198 806 640
198 807 040
198 807 041
198 807 042

Page
136
136
136
136
136
136
136
123
123
123
123
123
123
123
123
123
123
123
123
124
124
124
124
124
124
124
124
124
124
124
124
136
136
136
136
136
136
136
136
136
136
136
136
136
136
136
136
87
87
127
127
127

Index
Code
198 807 043
198 807 044
198 807 045
198 807 046
198 807 047
198 807 048
198 807 049
198 807 050
198 807 051
198 807 052
198 807 053
198 807 054
198 807 055
198 807 056
198 807 057
198 807 058
198 807 059
198 807 120
198 807 121
198 807 122
198 807 123
198 807 124
198 807 125
198 807 126
198 807 127
198 807 128
198 807 129
198 807 130
198 807 131
198 807 132
198 807 133
198 807 134
198 807 135
198 807 136
198 807 137
198 807 138
198 807 139
198 807 140
198 807 141
198 807 142
198 807 143
198 807 144
198 807 145
198 807 146
198 807 147
198 807 148
198 807 149
198 807 150
198 807 151
198 807 152
198 807 153
198 807 154

Page
127
127
127
127
127
127
127
128
128
128
128
128
128
128
128
128
128
125
125
125
125
125
125
125
125
125
125
125
125
126
126
126
126
126
126
126
126
126
126
126
126
129
129
129
129
129
129
129
129
129
129
130

Code
198 807 155
198 807 156
198 807 157
198 807 158
198 807 159
198 807 160
198 807 161
198 807 162
198 807 163
198 807 166
198 807 182
198 807 187
198 807 188
198335062*
198335063*
198335064*
198335065*
198335066*
198335067*
198335262*
198335263*
198335264*
198335265*
198335266*
198335267*
199 037 000
199 037 001
199 037 002
199 037 003
199 037 004
199 037 005
199 037 006
199 037 007
199 037 008
199 037 013
199 037 014
199 037 015
199 037 016
199 037 017
199 037 018
199 037 019
199 037 020
199 037 021
199 037 200
199 037 201
199 037 202
199 037 203
199 037 204
199 037 205
199 037 206
199 037 207
199 037 208

Page
130
130
130
130
130
130
130
130
130
136
137
137
137
132
132
132
132
132
132
133
133
133
133
133
133
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103

Code
199 037 213
199 037 214
199 037 215
199 037 216
199 037 217
199 037 218
199 037 219
199 037 220
199 037 221
199 037 400
199 037 401
199 037 402
199 037 403
199 037 404
199 037 405
199 037 406
199 037 407
199 037 408
199 037 413
199 037 414
199 037 415
199 037 416
199 037 417
199 037 418
199 037 419
199 037 420
199 037 421
199 038 000
199 038 001
199 038 002
199 038 003
199 038 004
199 038 005
199 038 006
199 038 007
199 038 008
199 038 013
199 038 014
199 038 015
199 038 016
199 038 017
199 038 018
199 038 019
199 038 020
199 038 021
199 038 026
199 038 027
199 038 028
199 038 029
199 038 030
199 038 031
199 038 032

Page
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
103
104
104
104
104
104
104
104
104
104
104
104
104
104
104
104
104
104
104
106
106
106
106
106
106
106
165

Index
Code
199 038 033
199 038 034
199 038 039
199 038 040
199 038 041
199 038 042
199 038 043
199 038 044
199 038 045
199 038 046
199 038 047
199 038 200
199 038 201
199 038 202
199 038 203
199 038 204
199 038 205
199 038 206
199 038 207
199 038 208
199 038 213
199 038 214
199 038 215
199 038 216
199 038 217
199 038 218
199 038 219
199 038 220
199 038 221
199 038 226
199 038 227
199 038 228
199 038 229
199 038 230
199 038 231
199 038 232
199 038 233
199 038 234
199 038 239
199 038 240
199 038 241
199 038 242
199 038 243
199 038 244
199 038 245
199 038 246
199 038 247
199 038 400
199 038 401
199 038 402
199 038 403
199 038 404
166

Page
106
106
106
106
106
106
106
106
106
106
106
104
104
104
104
104
104
104
104
104
104
104
104
104
104
104
104
104
104
106
106
106
106
106
106
106
106
106
106
106
106
106
106
106
106
106
106
104
104
104
105
105

Code
199 038 405
199 038 406
199 038 407
199 038 408
199 038 413
199 038 414
199 038 415
199 038 416
199 038 417
199 038 418
199 038 419
199 038 420
199 038 421
199 038 426
199 038 427
199 038 428
199 038 429
199 038 430
199 038 431
199 038 432
199 038 433
199 038 434
199 038 439
199 038 440
199 038 441
199 038 442
199 038 443
199 038 444
199 038 445
199 038 446
199 038 447
700 244 660
700 246 112
720 510 105
720 510 106
720 510 107
720 510 108
720 510 109
720 510 110
721 700 006
721 700 007
721 700 008
721 700 009
721 700 010
721 700 011
721 702 206
721 702 207
721 702 208
721 702 209
721 702 210
721 702 211
724 700 014

Page
105
105
105
105
105
105
105
105
105
105
105
105
105
106
106
106
106
106
106
106
106
106
106
106
106
107
107
107
107
107
107
31
135
42
42
42
42
42
42
90
90
90
90
90
90
90
90
90
90
90
90
146

Code
724 701 406
724 701 407
724 701 408
724 701 409
724 701 410
724 701 411
724 701 412
724 701 413
724 701 414
724 701 415
724 701 416
724 701 417
724 701 419
724 701 606
724 701 607
724 701 608
724 701 609
724 701 610
724 701 611
724 701 612
724 701 613
724 701 615
724 701 616
724 701 617
724 701 720
724 701 806
724 701 807
724 701 808
724 701 809
724 701 810
724 701 811
724 701 812
724 701 813
724 701 815
724 701 816
724 701 817
724 701 820
724 703 414
724 703 814
727 600 106
727 600 107
727 600 108
727 600 109
727 600 110
727 600 111
727 608 506
727 608 507
727 608 508
727 608 509
727 608 510
727 608 511
727 700 206

Page
145
145
145
145
145
145
145
145
145
145
145
145
145
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
146
147
147
147
147
147
147
147
147
145
147
120
120
120
120
120
120
120
120
120
120
120
120
91

Index
Code
727 700 207
727 700 208
727 700 209
727 700 210
727 700 211
727 700 212
727 700 213
727 700 214
727 700 215
727 700 216
727 700 217
727 700 219
727 700 220
727 700 221
727 700 222
727 700 223
727 700 224
727 700 225
727 700 406
727 700 407
727 700 408
727 700 409
727 700 410
727 700 411
727 700 412
727 700 413
727 700 414
727 700 416
727 700 417
727 700 419
727 700 420
727 700 421
727 700 422
727 700 423
727 701 206
727 701 207
727 701 208
727 701 209
727 701 210
727 701 211
727 701 212
727 701 213
727 701 214
727 701 220
727 701 406
727 701 407
727 701 408
727 701 409
727 701 410
727 701 411
727 701 412
727 701 413

Page
91
91
91
91
91
149
149
149
149
149
149
149
149
149
149
149
149
149
91
91
91
91
91
91
147
147
147
147
147
147
147
148
148
148
91
91
91
91
91
91
150
150
150
150
91
91
91
91
91
91
148
148

Code
727 701 414
727 701 422
727 701 423
729 000 106
729 000 107
729 000 108
729 000 109
729 000 110
729 000 111
729 000 112
729 000 113
729 000 114
729 000 116
729 000 117
729 001 106
729 001 107
729 001 108
729 001 109
729 001 110
729 001 111
729 001 113
729 001 115
729 001 656
729 001 657
729 001 658
729 001 659
729 001 660
729 001 661
729 001 662
729 001 663
729 001 664
729 010 120
729 010 122
729 010 123
729 011 120
729 100 105
729 100 106
729 100 107
729 100 108
729 100 109
729 100 110
729 100 111
729 100 112
729 100 113
729 100 114
729 100 116
729 100 117
729 100 119
729 100 121
729 100 206
729 100 207
729 100 208

Page
148
148
148
26
26
26
26
26
26
6
26
26
26
26
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
26
26
26
6
27
27
27
27
27
27
27
7
27
27
7
27
27
27
33
33
33

Code
729 100 209
729 100 210
729 100 211
729 101 105
729 101 106
729 101 107
729 101 108
729 101 109
729 101 110
729 101 111
729 101 113
729 101 115
729 101 117
729 101 206
729 101 207
729 101 208
729 150 106
729 150 107
729 150 108
729 150 109
729 150 110
729 150 111
729 150 112
729 150 113
729 150 114
729 150 116
729 150 117
729 150 119
729 150 120
729 150 121
729 150 122
729 150 123
729 151 105
729 151 106
729 151 107
729 151 108
729 151 109
729 151 110
729 151 111
729 151 113
729 151 115
729 151 117
729 151 120
729 151 176
729 151 177
729 151 178
729 151 179
729 151 180
729 151 181
729 151 182
729 151 183
729 151 184

Page
33
33
33
7
7
7
7
7
7
7
7
7
7
12
12
12
27
27
27
27
27
27
7
27
27
7
27
27
27
27
27
27
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
167

Index
Code
729 200 010
729 200 011
729 200 105
729 200 106
729 200 107
729 200 108
729 200 109
729 200 110
729 200 111
729 200 112
729 200 113
729 200 114
729 200 116
729 200 117
729 200 119
729 200 120
729 200 121
729 200 122
729 200 123
729 200 134
729 200 136
729 200 138
729 200 143
729 200 144
729 200 146
729 200 147
729 200 148
729 200 149
729 200 151
729 200 153
729 200 156
729 200 157
729 200 158
729 200 164
729 200 170
729 200 178
729 200 182
729 201 009
729 201 011
729 201 105
729 201 106
729 201 107
729 201 108
729 201 109
729 201 110
729 201 111
729 201 113
729 201 115
729 201 117
729 201 120
729 201 134
729 201 137
168

Page
28
28
28
28
28
28
28
28
28
8
28
28
8
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
28
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8

Code
729 201 138
729 201 141
729 201 147
729 201 151
729 201 164
729 201 170
729 201 178
729 250 106
729 250 107
729 250 108
729 250 109
729 250 110
729 250 111
729 250 112
729 250 113
729 250 114
729 250 116
729 251 106
729 251 107
729 251 108
729 251 109
729 251 110
729 251 111
729 300 108
729 300 111
729 510 105
729 510 106
729 510 107
729 510 108
729 510 109
729 510 110
729 510 111
729 510 112
729 510 114
729 510 313
729 511 105
729 511 106
729 511 107
729 511 108
729 511 109
729 511 110
729 511 111
729 511 205
729 511 206
729 511 207
729 511 208
729 511 209
729 511 210
729 511 211
729 521 105
729 521 106
729 521 107

Page
8
8
8
8
8
8
8
29
29
29
29
29
29
9
29
29
9
9
9
9
9
9
9
29
29
38
38
38
38
38
38
38
19
38
38
19
19
19
19
19
19
19
20
20
20
20
20
20
20
20
20
20

Code
729 521 108
729 521 109
729 521 110
729 521 111
729 523 105
729 523 106
729 523 107
729 523 108
729 523 109
729 523 110
729 523 111
729 530 306
729 530 307
729 530 308
729 530 309
729 530 310
729 530 311
729 530 806
729 530 807
729 530 808
729 530 809
729 530 810
729 530 811
729 531 306
729 531 307
729 531 308
729 531 309
729 531 310
729 531 311
729 531 806
729 531 807
729 531 808
729 531 809
729 531 810
729 531 811
729 540 205
729 540 206
729 540 207
729 540 208
729 540 209
729 540 210
729 540 211
729 540 705
729 540 706
729 540 707
729 540 708
729 540 709
729 540 710
729 540 711
729 545 505
729 545 506
729 545 507

Page
20
20
20
20
20
20
20
20
20
20
20
40
40
40
40
40
40
41
41
41
41
41
41
21
21
21
21
21
21
21
21
21
21
21
21
39
39
39
39
39
39
39
39
39
39
39
39
39
39
40
40
40

Index
Code
729 545 508
729 545 509
729 545 510
729 545 511
729 550 506
729 550 507
729 550 508
729 550 509
729 550 510
729 550 511
729 550 906
729 550 907
729 550 908
729 550 909
729 550 910
729 550 911
729 550 957
729 550 958
729 550 967
729 550 968
729 551 506
729 551 507
729 551 508
729 551 509
729 551 510
729 551 511
729 551 906
729 551 907
729 551 908
729 551 909
729 551 910
729 551 911
729 600 105
729 600 106
729 600 107
729 600 108
729 600 109
729 600 110
729 600 111
729 600 162
729 600 163
729 600 164
729 601 105
729 601 106
729 601 107
729 601 108
729 601 109
729 601 110
729 601 111
729 640 105
729 640 106
729 640 107

Page
40
40
40
40
41
41
41
41
41
41
41
41
42
42
42
42
41
41
41
42
22
22
22
22
22
22
21
21
21
21
21
21
43
43
43
43
43
43
43
43
43
43
19
19
19
19
19
19
19
43
43
43

Code
729 640 108
729 640 109
729 640 110
729 640 111
729 640 112
729 640 114
729 640 123
729 641 105
729 641 106
729 641 107
729 641 108
729 641 109
729 641 110
729 641 111
729 690 012
729 690 013
729 690 014
729 690 405
729 690 406
729 690 407
729 690 408
729 690 409
729 690 410
729 690 411
729 730 006
729 730 007
729 730 008
729 730 009
729 730 010
729 730 011
729 730 013
729 730 014
729 730 017
729 730 109
729 730 110
729 730 111
729 730 113
729 730 117
729 731 106
729 731 107
729 731 108
729 731 109
729 731 110
729 731 111
729 731 113
729 731 114
729 731 117
729 731 164
729 732 106
729 732 107
729 732 108
729 732 113

Page
43
43
43
43
43
43
43
19
19
19
19
19
19
19
44
44
44
43
43
43
43
43
43
43
18
18
18
18
18
18
18
18
18
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
18
18
18
18

Code
729 732 114
729 790 106
729 790 107
729 790 108
729 790 109
729 790 110
729 790 111
729 790 112
729 790 113
729 790 114
729 790 116
729 790 117
729 790 119
729 790 120
729 790 121
729 790 122
729 790 123
729 791 106
729 791 107
729 791 108
729 791 109
729 791 110
729 791 111
729 791 113
729 791 115
729 791 117
729 791 120
729 900 181
729 900 303
729 900 306
729 900 312
729 900 334
729 900 337
729 900 341
729 900 342
729 900 346
729 900 347
729 900 348
729 900 352
729 900 353
729 900 354
729 900 355
729 900 358
729 900 359
729 900 360
729 900 364
729 900 365
729 900 370
729 900 371
729 900 372
729 900 376
729 900 378

Page
18
37
37
37
37
37
37
16
37
37
16
37
37
37
37
37
37
16
16
16
16
16
16
16
16
16
16
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
169

Index
Code
729 900 385
729 900 388
729 900 390
729 900 392
729 900 396
729 900 406
729 900 407
729 900 408
729 900 409
729 900 410
729 900 411
729 900 905
729 900 906
729 900 907
729 900 908
729 900 909
729 900 910
729 900 911
729 900 912
729 900 913
729 900 914
729 900 916
729 901 334
729 901 337
729 901 341
729 901 342
729 901 346
729 901 347
729 901 348
729 901 352
729 901 353
729 901 354
729 901 355
729 901 358
729 901 359
729 901 360
729 901 361
729 901 364
729 901 370
729 901 371
729 901 372
729 901 374
729 901 381
729 901 385
729 901 396
729 901 406
729 901 407
729 901 408
729 901 409
729 901 410
729 901 411
729 901 534
170

Page
31
31
31
31
31
34
34
34
34
34
34
30
30
30
30
30
30
30
9
31
31
9
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
12
12
12
12
12
12
14

Code
729 901 537
729 901 541
729 901 542
729 901 905
729 901 906
729 901 907
729 901 908
729 901 909
729 901 910
729 901 911
729 901 913
729 901 914
729 910 105
729 910 106
729 910 107
729 910 108
729 910 109
729 910 110
729 910 111
729 910 112
729 910 113
729 910 114
729 910 116
729 910 117
729 910 119
729 910 120
729 910 121
729 910 122
729 910 123
729 910 206
729 910 207
729 910 208
729 910 209
729 910 210
729 910 211
729 910 342
729 910 347
729 910 354
729 910 360
729 910 366
729 910 371
729 910 434
729 910 437
729 910 441
729 910 446
729 910 452
729 910 458
729 910 505
729 910 556
729 910 557
729 910 558
729 910 559

Page
14
14
14
9
9
9
9
9
9
9
9
9
30
30
30
30
30
30
30
9
30
30
10
30
30
30
30
30
30
33
33
33
33
33
33
32
32
32
32
32
32
33
33
33
33
33
33
34
34
34
34
34

Code
729 910 560
729 910 561
729 910 606
729 910 607
729 910 608
729 911 005
729 911 006
729 911 007
729 911 008
729 911 009
729 911 010
729 911 011
729 911 105
729 911 106
729 911 107
729 911 108
729 911 109
729 911 110
729 911 111
729 911 113
729 911 115
729 911 117
729 911 120
729 911 389
729 911 505
729 911 509
729 911 510
729 911 511
729 911 513
729 911 515
729 911 555
729 911 556
729 911 557
729 911 558
729 911 705
729 911 706
729 911 707
729 911 708
729 911 709
729 911 710
729 911 711
729 911 906
729 911 907
729 911 908
729 913 105
729 913 106
729 913 107
729 913 108
729 913 109
729 913 110
729 913 111
729 913 113

Page
34
34
35
35
35
12
12
12
12
12
12
12
9
9
9
9
9
9
9
9
9
10
10
11
36
36
36
36
36
36
13
13
13
13
13
13
13
13
13
13
13
36
36
36
13
13
13
13
13
13
13
13

Index
Code
729 913 115
729 913 905
729 913 906
729 913 907
729 913 908
729 913 909
729 913 910
729 913 911
729 913 913
729 913 915
729 960 105
729 960 106
729 960 107
729 960 108
729 960 109
729 960 110
729 960 111
729 960 112
729 960 113
729 960 114
729 960 116
729 960 117
729 960 405
729 960 406
729 960 407
729 960 408
729 961 105
729 961 106
729 961 107
729 961 108
729 961 109
729 961 110
729 961 111
729 961 113
729 961 115
729 961 906
729 961 907
729 961 908
745 410 107
745 500 012
745 500 013
745 500 014
745 500 015
745 500 016
745 500 017
747 502 012
747 502 013
747 502 014
747 502 015
747 502 016
747 502 017
747 502 032

Page
13
14
14
14
14
14
14
14
14
14
32
32
32
32
32
32
32
10
32
32
10
32
36
36
36
36
10
10
10
10
10
10
10
10
10
15
15
15
93
88
88
88
88
88
88
88
88
88
88
88
88
88

Code
747 502 033
747 502 034
747 502 035
747 502 036
747 502 037
747 503 012
747 503 013
747 503 014
747 503 015
747 503 016
747 503 017
748 400 004
748 400 005
748 400 006
748 400 007
748 400 008
748 400 009
748 400 010
748 400 011
748 400 012
748 400 013
748 400 014
748 400 015
748 400 016
748 400 017
748 400 018
748 400 020
748 400 021
748 400 022
748 400 023
748 400 025
748 400 026
748 400 027
748 400 305
748 400 306
748 400 307
748 400 308
748 400 309
748 400 310
748 400 311
748 400 312
748 400 313
748 400 314
748 400 315
748 400 316
748 400 317
748 400 319
748 400 320
748 400 321
748 400 322
748 400 323
748 401 006

Page
88
88
88
88
88
88
88
88
88
88
88
151
151
91
91
91
91
91
91
151
151
152
152
152
152
152
152
152
152
152
152
152
152
153
153
153
153
153
153
153
153
153
153
153
153
153
153
153
153
153
153
155

Code
748 401 007
748 401 008
748 401 009
748 401 010
748 401 011
748 401 013
748 401 014
748 401 017
748 401 064
748 401 109
748 401 110
748 401 111
748 401 113
748 401 117
748 401 206
748 401 207
748 401 208
748 401 211
748 401 213
748 401 214
748 410 001
748 410 002
748 410 003
748 410 004
748 410 005
748 410 006
748 410 007
748 410 008
748 410 009
748 410 010
748 410 011
748 410 012
748 410 013
748 410 014
748 410 015
748 410 016
748 410 023
748 410 027
748 410 042
748 410 059
748 410 062
748 410 099
748 410 103
748 410 106
748 410 116
748 410 119
748 410 151
748 410 231
748 410 254
748 410 318
748 410 319
748 410 320

Page
155
155
155
155
156
156
155
156
156
155
155
155
155
155
156
156
156
156
156
156
121
121
75
151
151
89
89
89
89
89
89
121
121
121
151
151
75
115
115
75
75
115
115
75
115
75
75
75
75
108
108
108
171

Index
Code
748 410 321
748 410 322
748 440 018
748 440 019
748 440 020
748 440 021
748 440 022
748 440 705
748 440 706
748 440 707
748 440 708
748 440 709
748 440 710
748 440 711
748 440 712
748 440 713
748 440 714
748 440 715
748 440 716
748 440 717
748 440 719
748 440 720
748 440 721
748 440 722
748 440 723
748 440 724
748 440 725
748 440 726
748 440 727
748 440 728
748 440 729
748 500 012
748 500 013
748 500 014
748 500 015
748 500 016
748 500 017
749 400 005
749 400 006
749 400 007
749 400 008
749 400 009
749 400 010
749 400 011
749 400 012
749 400 013
749 400 015
749 400 016
749 400 017
749 400 018
749 400 020
749 400 021
172

Page
108
108
110
110
110
110
110
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
88
88
88
88
88
88
151
151
151
151
151
151
151
151
151
152
152
152
152
152
152

Code
749 400 022
749 400 025
749 400 026
749 400 027
749 401 006
749 401 007
749 401 008
749 401 009
749 401 010
749 401 011
749 401 013
749 401 014
749 401 017
749 401 064
749 401 109
749 401 110
749 401 111
749 401 113
749 401 117
749 401 206
749 401 207
749 401 208
749 401 211
749 401 213
749 401 214
749 410 004
749 410 005
749 410 006
749 410 007
749 410 008
749 410 009
749 410 010
749 410 011
749 410 014
749 410 015
749 410 016
749 440 705
749 440 706
749 440 707
749 440 708
749 440 709
749 440 710
749 440 711
749 440 712
749 440 713
749 440 714
749 440 715
749 440 716
749 440 717
749 440 719
749 440 720
749 440 721

Page
152
152
152
152
155
155
155
155
155
156
156
156
156
156
155
155
155
155
155
156
156
156
156
156
156
151
151
89
89
89
89
89
89
151
151
151
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154
154

Code
749 440 722
749 440 723
749 440 724
749 440 725
749 440 726
749 440 727
749 440 728
749 440 729
749 500 012
749 500 013
749 500 014
749 500 015
749 500 016
749 500 017
790 109 001
790 109 002
790 109 003
790 309 003
790 309 004
799 298 010
799 298 022
799 299 001
799 299 002
799 299 003
799 299 004
799 299 005
800 015 141
800 015 142
800 015 143
800 015 179
800 024 832
800 024 834

Page
154
154
154
154
154
154
154
154
88
88
88
88
88
88
144
144
144
144
144
144
144
144
144
144
144
144
54
55
55
55
54
54

Stockist

George Fischer Sales Limited
Paradise Way, Coventry CV2 2ST
Tel. 024 7653 5535, Fax. 024 7653 0450
email uk.ps@georgfischer.com
website www.georgefischer.co.uk

LITGF0743 (01.11)
© George Fischer Sales Ltd.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2011:01:10 08:41:51Z
Metadata Date                   : 2011:01:20 09:08:23Z
Modify Date                     : 2011:01:20 09:08:23Z
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 5716 bytes, use -b option to extract)
Instance ID                     : uuid:d66343f0-2474-11e0-8537-0017f204331c
Document ID                     : adobe:docid:indd:71ecc7a9-bccf-11df-ab1e-ee4e5bac9dcc
Rendition Class                 : proof:pdf
Derived From Instance ID        : c37155b8-bbee-11df-9637-f29151013c5f
Derived From Document ID        : adobe:docid:indd:bcbab5ee-4d4e-11da-b6bd-d711d40120d7
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00
Manifest Placed Y Resolution    : 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:0D3B3C2A29BBDF119878FE9F2DFA099C, uuid:100D8E4329BBDF119878FE9F2DFA099C, uuid:0C7B92B529BBDF119878FE9F2DFA099C, uuid:72AFD3D229BBDF119878FE9F2DFA099C, uuid:75BAD4C429BBDF119878FE9F2DFA099C, uuid:7ABAD4C429BBDF119878FE9F2DFA099C, uuid:7AAFD3D229BBDF119878FE9F2DFA099C, uuid:0B0D8E4329BBDF119878FE9F2DFA099C, uuid:117B92B529BBDF119878FE9F2DFA099C, uuid:060D8E4329BBDF119878FE9F2DFA099C, uuid:F5A83BDE10BCDF11A3E58DFC4597DEB0, uuid:F714E8ECCFBCDF11A6C9CDE103822DFA, uuid:3E00AEBB10BCDF11A3E58DFC4597DEB0, uuid:D0A310C1F5BCDF1196088CED409F7B19, uuid:D84C278E80BDDF11AA7C8F7040D96A9E, uuid:4F4D215A80BDDF11AA7C8F7040D96A9E, uuid:CBE0D07580BDDF11AA7C8F7040D96A9E, uuid:B5A2697C89BDDF11AA7C8F7040D96A9E, uuid:D455220983BDDF11AA7C8F7040D96A9E, uuid:D455220983BDDF11AA7C8F7040D96A9E, uuid:97A453C289BDDF11AA7C8F7040D96A9E, uuid:01DFCE4683BDDF11AA7C8F7040D96A9E, uuid:39DAA06283BDDF11AA7C8F7040D96A9E, uuid:39DAA06283BDDF11AA7C8F7040D96A9E, uuid:5989B18183BDDF11AA7C8F7040D96A9E, uuid:6289B18183BDDF11AA7C8F7040D96A9E, uuid:E6E67ACA83BDDF11AA7C8F7040D96A9E, uuid:5CFD06739CC1DF119BB8C907BEB27E6F, uuid:FFD5B33084BDDF11AA7C8F7040D96A9E, uuid:D30FEF1970C1DF119BB8C907BEB27E6F, uuid:D338BAF39BC1DF119BB8C907BEB27E6F, uuid:CB76551988BDDF11AA7C8F7040D96A9E, uuid:B5A2697C89BDDF11AA7C8F7040D96A9E, uuid:7BA6EE5288BDDF11AA7C8F7040D96A9E, uuid:CB76551988BDDF11AA7C8F7040D96A9E, uuid:11B1277788BDDF11AA7C8F7040D96A9E, uuid:1AB1277788BDDF11AA7C8F7040D96A9E, uuid:B0D2FCA788BDDF11AA7C8F7040D96A9E, uuid:1AB1277788BDDF11AA7C8F7040D96A9E, uuid:B0D2FCA788BDDF11AA7C8F7040D96A9E, uuid:86FAE1C788BDDF11AA7C8F7040D96A9E, uuid:27DCBB62B9BDDF11AA7C8F7040D96A9E, uuid:69033E75B9BDDF11AA7C8F7040D96A9E, uuid:81CCFA8EB9BDDF11AA7C8F7040D96A9E, uuid:5914E5A5B9BDDF11AA7C8F7040D96A9E, uuid:5914E5A5B9BDDF11AA7C8F7040D96A9E, uuid:5E14E5A5B9BDDF11AA7C8F7040D96A9E, uuid:4618CCD0B9BDDF11AA7C8F7040D96A9E, uuid:5914E5A5B9BDDF11AA7C8F7040D96A9E, uuid:5E14E5A5B9BDDF11AA7C8F7040D96A9E, uuid:5E14E5A5B9BDDF11AA7C8F7040D96A9E, uuid:F14D19409EC1DF119BB8C907BEB27E6F, uuid:F14D19409EC1DF119BB8C907BEB27E6F, uuid:F14D19409EC1DF119BB8C907BEB27E6F, uuid:5BDC19EEB9BDDF11AA7C8F7040D96A9E, uuid:F7BE6913BABDDF11AA7C8F7040D96A9E, uuid:A2CFBD574AC2DF11BDE7F4F4728CAD41, uuid:8C8BFB8A4AC2DF11BDE7F4F4728CAD41, uuid:958BFB8A4AC2DF11BDE7F4F4728CAD41, uuid:BA079E02D0BCDF11A6C9CDE103822DFA, uuid:97CD678F00BCDF11A3E58DFC4597DEB0, uuid:630AEAA84AC2DF11BDE7F4F4728CAD41, uuid:77679CD34AC2DF11BDE7F4F4728CAD41, uuid:E5CC2DFF00BCDF11A3E58DFC4597DEB0, uuid:B5079E02D0BCDF11A6C9CDE103822DFA, uuid:0A56A713D0BCDF11A6C9CDE103822DFA, uuid:0F56A713D0BCDF11A6C9CDE103822DFA, uuid:FF4408FA4AC2DF11BDE7F4F4728CAD41, uuid:91CD678F00BCDF11A3E58DFC4597DEB0, uuid:3C420F2901BCDF11A3E58DFC4597DEB0, uuid:CD9A6D1104BCDF11A041E828831BCB9B, uuid:044508FA4AC2DF11BDE7F4F4728CAD41, uuid:AA92503E4BC2DF11BDE7F4F4728CAD41, uuid:80CE44544BC2DF11BDE7F4F4728CAD41, uuid:D80EE3754BC2DF11BDE7F4F4728CAD41, uuid:ACA40CBD4BC2DF11BDE7F4F4728CAD41, uuid:FB0DA2EF03BCDF11A041E828831BCB9B, uuid:D3DED2D9FDBBDF11A041E828831BCB9B, uuid:164DA9E9AEBDDF11AA7C8F7040D96A9E, uuid:2E2D81FEAEBDDF11AA7C8F7040D96A9E, uuid:1F67A11AAFBDDF11AA7C8F7040D96A9E, uuid:59B34332AFBDDF11AA7C8F7040D96A9E, uuid:3B08EB51AFBDDF11AA7C8F7040D96A9E, uuid:4408EB51AFBDDF11AA7C8F7040D96A9E, uuid:4408EB51AFBDDF11AA7C8F7040D96A9E, uuid:BA31F776AFBDDF11AA7C8F7040D96A9E, uuid:608FB28DAFBDDF11AA7C8F7040D96A9E, uuid:30E2B4B7AFBDDF11AA7C8F7040D96A9E, uuid:1A33296F09BCDF11A041E828831BCB9B, uuid:1A33296F09BCDF11A041E828831BCB9B, uuid:F49DD7160785DF11B5B7F2D3E2506B39
Manifest Reference Document ID  : uuid:5D67F62C22EDDD1196838C35BB2B0CE1, uuid:3BC170874AD911DB8FAFAC7EB8640E0F, uuid:17008E224AD911DB8FAFAC7EB8640E0F, uuid:3D1E74024DFE11DB94BCA2214B6984F1, uuid:E866BA894AD811DB8FAFAC7EB8640E0F, uuid:79AFD3D229BBDF119878FE9F2DFA099C, uuid:F7F37C11F8F4DC11A9B9B6574CB4FC29, uuid:17008E1E4AD911DB8FAFAC7EB8640E0F, uuid:7487FC464AEA11DB8FAFAC7EB8640E0F, uuid:E68CFD7E2691DC118153EB24BF671640, uuid:e1defbbb-1dd1-11b2-0a00-0000982afcff, uuid:e1defbbb-1dd1-11b2-0a00-0000982afcff, uuid:e1defbbb-1dd1-11b2-0a00-0000982afcff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:6e0eaf22-1dd2-11b2-0a00-00001893b7ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:9fcc929c-1dd1-11b2-0a00-0000b8d8a8ff, uuid:6393F87D01BCDF11A3E58DFC4597DEB0, uuid:96CD678F00BCDF11A3E58DFC4597DEB0, uuid:E4CC2DFF00BCDF11A3E58DFC4597DEB0, uuid:3E8EE09701BCDF11A3E58DFC4597DEB0, uuid:876BDDDB00BCDF11A3E58DFC4597DEB0, uuid:816BDDDB00BCDF11A3E58DFC4597DEB0, uuid:90CD678F00BCDF11A3E58DFC4597DEB0, uuid:EACC2DFF00BCDF11A3E58DFC4597DEB0, uuid:5D93F87D01BCDF11A3E58DFC4597DEB0, uuid:D003616D01BCDF11A3E58DFC4597DEB0, uuid:D603616D01BCDF11A3E58DFC4597DEB0, uuid:1933296F09BCDF11A041E828831BCB9B, uuid:1933296F09BCDF11A041E828831BCB9B
Manifest Reference Version ID   : 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Has XFA                         : No
Page Count                      : 209
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools