KT 208 AC User Manual

User Manual: 208

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadKT-208 208 AC-208 User Manual
Open PDF In BrowserView PDF
AC-208 Universal Air Conditioner Remote Control

Model Setting of Remote Control
1. Gently pull side cover of remote control down past the reset button to
expose the battery compartment. Install 2 AAA batteries as per polar
indicated on battery cabin.
2. Find the model code from Model Code List. If there are more than one
numbers for one brand , you will have to try each one until you find the correct
code. e.g., for SANYO, try model codes 035 to 039 starting with 35.
3. Press the SET keyhole gently with the end of a bent paper clip, MODEL code
on LCD will flash, then press the + CODE SEL key to your selected code
number. You can hold the key down for faster access. Once you desired
number appears press the ENTER key, the MODEL code stops flashing. Aim
the remote at the air conditioner by pressing ON/OFF key. If the AC turns on
your remote is ready to use. If not, try the next number.
Remote Control Auto Search
If you do not know model of air conditioner and/or remote control or you
cannot find required model from Model Code List , please operate as per the
following steps:
1. Press the SET keyhole gently with the end of a bent paper clip, model code on
LCD will flash. Aim the remote control at air conditioner. Press the AUTO
search key once, model code adds 1 automatically and emit corresponding
ON/OFF signal. Press and release until air conditioner receives signal and

AC-208 Universal Air Conditioner Remote Control
produces buzzer sound. Then press ENTER key.
2.

After turning on the air conditioner, try other function key .If they do not work,
repeat above steps until it is correct.

Attention
1. You will have to set the model number again if you remove the batteries.
Therefore check the code on the remote for quick and easy change over and
code setting.

If it is not used for a long time, remove the battery to

prevent possible battery leakage. When the LCD looks dim, change the
batteries (do not mix new and old batteries)
2. If abnormal situation appears because of incorrect use, please put pen tip
or other thin item into “Reset” hole. Press it to restore to origianal factory
settings. It is necessary to set model code again.
3. The manufacturer keeps the right to change the parameter and function of
the product.
Technical Parameters
Controllable distance:

Large than 8 meters

Power supply voltage:

DC 3V

Battery

Battery AAA(UM-4.R03)*2

Dimension:

L 160mm

Weight:

Approx.95g (excl.the batteries)

W 58mm

D18mm
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Creator                         : KT-208.doc - Microsoft Word
Create Date                     : 2007:09:19 08:39:39
Title                           : KT-208.PDF
Author                          : Rob Livett
Producer                        : Acrobat PDFWriter 4.0 for Windows NT
EXIF Metadata provided by EXIF.tools

Navigation menu