ATV312_programming_manual_EN_BBV46385_02 ATV312 Programming Manual
User Manual:
Open the PDF directly: View PDF
Page Count: 126 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Important information
- Before you begin
- Documentation structure
- Software enhancements
- Steps for setting up the drive
- Setup - Preliminary Recommendations
- Factory configuration
- Basic functions
- Remote display terminal option, ATV31
- Remote graphic display terminal option, ATV61/ATV71
- Remote display terminal option, ATV12
- Structure of the parameter tables
- Compatibility of functions
- List of functions that can be assigned to inputs/outputs
- List of functions that can be assigned to the Network and Modbus control word bits
- Checklist
- Programming
- [SPEED REFERENCE] (rEF-) menu
- [SETTINGS] (SEt-) menu
- [MOTOR CONTROL] (drC-) menu
- [INPUTS / OUTPUTS CFG] (I-O-) menu
- [COMMAND] (CtL-) menu
- Control and reference channels
- Reference channel for [ACCESS LEVEL] (LAC) = [Level 1] (L1) or [Level 2] (L2)
- Control channel for [ACCESS LEVEL] (LAC) = [Level 1] (L1) or [Level 2] (L2)
- Reference channel for [ACCESS LEVEL] (LAC) = [Level 3] (L3)
- Control channel for [ACCESS LEVEL] (LAC) = [Level 3] (L3)
- Control channel for [ACCESS LEVEL] (LAC) = [Level 3] (L3)
- [COMMAND] (CtL-) menu
- [APPLICATION FUNCT.] (FUn-) menu
- [FAULT MANAGEMENT] (FLt-) menu
- [COMMUNICATION] (COM-) menu
- [MONITORING] (SUP-) menu
- Migration ATV31 - ATV312
- Diagnostics and troubleshooting
- Index of functions
- Index of parameter codes and customer settings