Amlogic Engineering Notes USB Burning Tool V2 Guide V0.4
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 11
| Download | |
| Open PDF In Browser | View PDF |
en tia Application Notes l! Amlogic Application Notes fid Amlogic USB Burning Tool V2 Guide A m lo gi c C on Revision 0.4 Amlogic, Inc. 2518 Mission College Blvd Santa Clara, CA 95054 U.S.A. www.amlogic.com Legal Notices © 2014 Amlogic, Inc. All rights reserved. Amlogic ® is registered trademarks of Amlogic, Inc. All other registered trademarks, trademarks and service marks are property of their respective owners. This document is Amlogic Company confidential and is not intended for any external distribution. Amlogic Confidential 1/11 Amlogic Application Notes Revision History Date Owner Changes 0.1 0.2 0.3 0.4 July 30, 2013 August 1, 2013 December 25, 2013 June 60, 2014 Jinkai.li Jinkai.li Jinkai.li Jinkai.li Initial version release Modify burning configurations Modify UI and erase configurations Modify Menu A m lo gi c C on fid en tia l! Revision Amlogic Confidential 2/11 Amlogic Application Notes Table of Contents 1. Overview ......................................................................................................................................................................... 4 2. Work Station Standard .................................................................................................................................................... 4 3. Tool UI and Operating Intro ............................................................................................................................................. 5 3.2 Connect Device .................................................................................................................................................... 5 3.3 Load the Image .................................................................................................................................................... 6 3.4 Burn ...................................................................................................................................................................... 6 3.5 Finish Burning ...................................................................................................................................................... 7 3.6 Burning Configurations ......................................................................................................................................... 9 3.7 Statistics ............................................................................................................................................................... 9 3.8 Log ..................................................................................................................................................................... 10 tia l! Main...................................................................................................................................................................... 5 Other Menus .................................................................................................................................................................. 11 A m lo gi c C on fid en 4. 3.1 Amlogic Confidential 3/11 Amlogic Application Notes 1. Overview This tool is mainly used for image burning during mass product. It supports empty platform burning, non-empty platform easing and upgrading, large image burning (image file >1G), key burning. The tool features easy operation and simple and intuitive UI. 2. Work Station Standard tia l! Requirement on PC: Main clock: 2G or above Memory: 1GB Motherboard should support USB 2.0 HS mode or has USB3.0 host controller Note: Not all the USB 2.0 controller supports high speed mode. In the “Device Manger”, the controller that shows “Enhanced Host Controller” will support. en Requirement on OS: XP or Win 7 Close antivirus software fid HUB and USB Cable: “SSK” USB HUB --- SHU023(7-port) “SSK” USB cables are also recommended A m lo gi c C on DC: 5V/2.0A DC power supply to PCBA Amlogic Confidential 4/11 Amlogic Application Notes 3. Tool UI and Operating Intro lo gi c C on fid en tia l! 3.1 Main Figure 2.1 - Main m “Device ID” shows the related ports connected to hub. HUBx-4 means port #4. X shows the scanned hub number in sequence when scanning the USB devices. It is not a fixed value. A 3.2 Connect Device Before start burning, the devices need to be well connected. First power on SSK HUB, connect HUB to USB port of PC and enable the HUB ports which has platform connected. If it shows devices is successfully connected, the corresponding LED of the port will turn green and in the main interface, the status of the related port under device ID will show “Connect success”. Amlogic Confidential 5/11 Amlogic Application Notes 3.3 Load the Image l! Figure 2.2－Load Burning Image Select and load the image file to be burned from the menu “File” – “Import Image”. It is also possible to choose the recent used image files through “Recent files”. A m lo gi c C on fid en tia 3.4 Burn Figure 2.3 Under Image Burning Click “Start” button to start the image burning. During the process, column “status” will show the percentage of the progress and column “time” shows the time burning has used. Amlogic Confidential 6/11 Amlogic Application Notes gi c C on fid en tia l! 3.5 Finish Burning A m lo Figure 2.4 Burning successfully Amlogic Confidential 7/11 C on fid en tia l! Amlogic Application Notes c Figure 2.5 Burning failed lo gi After finish burning, column “Status” shows light green when successfully. Otherwise it shows red. Column “Statistic” represents “number of failure/Total burning number” of the current port”. In the example shown in Figure 2.5, 1 device is burned at the current port and 0 fails. m At the bottom-right corner, it shows the statistics of all the ports. “Total“ shows the total number of burned devices , “Success” shows the number of success and “Error” shows the number of failure. A If re-burning is needed, please re-plug the device and the tool will start to burn automatically. Amlogic Confidential 8/11 Amlogic Application Notes en Figure 2.6 Burning Configurations tia l! 3.6 Burning Configurations fid “Erase flash” means erasing flash. After checking, the user can select the erasing type from : Normal erase, Force erase, Erase all and Force erase all. The default is Normal erase. “Erase bootloader” means erasing bootloader, which is on default. on “Reset after success” means rebooting the device after successfully burnt. The default is not rebooting. “Overwrite key” means overwriting the existing keys. The default is not overwriting. A m lo gi c C 3.7 Statistics Figure 2.7 Statistics “Device ID” corresponds to the “Device ID” in burning status list. “HUBx-4” represents for port #4; “Time” for the local time of finish or termination; “Result” for burning result.in format “[error code]message”. If successful, the error code will be 0x00000000. Otherwise it will be non-zero and the message will show the failure info. Double clicking result item will show the log during the current hour. Amlogic Confidential 9/11 Amlogic Application Notes 3.8 Log A m lo gi c C on fid en tia l! Figure 2.8 Log File The log can be found under tool’s “log” directory, which has sub folders including month and day. The sub-folder “2013.07” has the log of Jul,2013 stored and the sub-folder “2013.07.30” has the log of Jul.30,2014 stored. The final log are save in hour, e.g., “2013.07.30-10” means the log of 10:00 on Jul.30, 2014. Amlogic Confidential 10/11 Amlogic Application Notes 4. Other Menus Figure 3.1 Language menu C on fid “View” menu“ is for adding which columns will be shown in the status list. en Figure 3.2 View menu tia l! “Language” menu lists the UI language which is support. The current language is set to “English”. A m lo gi c Figure 3.3 About menu “Content” shows the help document. “Upgrade” is for online update of the tool. “About USB_Burning_Tool” shows the version info of the tool. Amlogic Confidential 11/11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Page Count : 11 Language : zh-CN Tagged PDF : Yes Modify Date : 2014:06:30 12:59:29+08:00 Author : Lin.xu Create Date : 2014:06:30 12:58:30+08:00 Producer : Microsoft® Word 2013 Title : Amlogic Engineering Notes Creator : Microsoft® Word 2013EXIF Metadata provided by EXIF.tools