Application Kit TC2X7 V1.0 Manual V10

• Trademarks
• Table of Contents
• List of Figures
• List of Tables
• 1 Introduction
• 2 Application Kit Features
  • 2.1 Summary of Features
  • 2.2 Block Diagram
    • Figure 2-1 Application Kit TC2X7 Block Schematic
  • 2.3 Placement
    • Figure 2-2 Applcation Kit TC2X7 V1.X Top Placement
    • Figure 2-3 Applcation Kit TC2X7 V1.X Bottom Placement
• 3 Application Kit Information
  • 3.1 Power Supply
  • 3.1.1 Power via supply connector (X101)
  • 3.1.2 Power via Micro USB (BU301)
  • 3.1.3 Multi Voltage Safety Micro Processor Supply TLF35584QV
  • 3.2 Real Time Clock
  • 3.3 XGA Display
  • 3.3.1 Write a display register
  • 3.3.2 Read a display register
  • 3.3.3 Touch controller
  • 3.4 Micro SD card
  • 3.5 LEDs
  • 3.6 Clock
  • 3.7 USB Connector
    • DAS website
  • 3.7.1 Serial Connection to PC
  • 3.7.2 miniWiggler JDS
  • 3.8 Beeper
  • 3.9 MultiCAN
  • 3.10 LIN
  • 3.11 Ethernet
  • 3.12 Core current measurement
  • 3.13 Other peripherals
  • 3.14 Toggle LED’s
  • 3.15 Debug System
  • 3.15.1 OCDS1
• 4 Signal Description
  • Table 4-1 Power Signals
  • Table 4-2 Reset Signals
  • Table 4-3 Interrupt Signals
  • Table 4-4 Clock Signals
  • Table 4-5 Debug Signals
  • Table 4-6 Peripheral Signals
• 5 Connector Pin Assignment
  • 5.1 IO Connectors TC237
    • Figure 5-1 IO Connectors TC237- Pinout
  • 5.2 IO Connectors TC267, TC277, TC297
    • Figure 5-2 IO Connectors TC267, TC277, TC297 - Pinout
  • 5.3 Power connector pinout
    • Figure 5-3 Power connector pinout
  • 5.4 USB connector pinout
    • Figure 5-4 USB connector Pinout
  • 5.5 CAN connector pinout
    • Figure 5-5 CAN connector pinout (IDC10)
  • 5.6 LIN connector pinout
    • Figure 5-6 LIN connector pinout (IDC10)
  • 5.7 OCDS connector pinout
    • Figure 5-7 OCDS connector pinout (IDC16)
  • 5.8 Ethernet Connector
    • Figure 5-8 Ethernet connector pinout (RJ45)
  • 5.9 DAP connector pinout
    • Figure 5-9 DAP connector pinout (FTSH10)
• 6 Schematic and Layout
  • 6.1 Schematic
  • 6.1.1 Known problems/differences
    • Figure 6-1 Schematic - Project
    • Figure 6-2 Schematic - CPU and Power Supply
    • Figure 6-3 Schematic - Peripherals
    • Figure 6-4 Schematic - miniWiggler JDS and OCDS1
  • 6.2 Layout
    • Figure 6-5 Component Plot Top Layer
    • Figure 6-6 Component Plot Bottom Layer
  • 6.3 Layout with Dimensioning
    • Figure 6-7 Dimensioning (mm)
    • Figure 6-8 Dimensioning (mil)
  • Keyword Index
• A
• B
• C
• D
• E
• F
• H
• I
• L
• M
• O
• P
• R
• S
• T
• U
• W
• X