If Not Then B2298558

• Network Guide
  • Introduction
  • Important
  • Software Version Conventions Used in This Manual
  • Trademarks
• Manuals for This Machine
• TABLE OF CONTENTS
  • How to Read This Manual
    • Symbols
  • Setting Up the Machine on a Network
    • Initial Settings Overview
    • Initial Settings
• 1. Using a Printer Server
  • Preparing Printer Server
    • Printing notification via SmartDeviceMonitor for Client
      • Setting the print server
      • Setting a Client
  • Using NetWare
    • Setting Up as a Print Server (NetWare 3.x)
    • Setting Up as a Print Server (NetWare 4.x, 5 / 5.1, 6 / 6.5)
    • Using Pure IP in the NetWare 5 / 5.1 or 6 / 6.5 Environment
    • Setting Up as a Remote Printer (NetWare 3.x)
    • Setting Up as a Remote Printer (NetWare 4.x, 5 / 5.1, 6 / 6.5)
• 2. Monitoring and Configuring the Printer
  • Using Web Image Monitor
    • Displaying Top Page
    • When user authentication is set
      • Login (using Web Image Monitor)
      • Log Off (using Web Image Monitor)
    • About Menu and Mode
    • Access in the Administrator Mode
    • Displaying Web Image Monitor Help
      • Downloading Help
      • Linking the URL of the Help File to the [Help] Button.
  • Using SmartDeviceMonitor for Admin
    • Installing SmartDeviceMonitor for Admin
    • Changing the Network Interface Board Configuration
    • Locking the Menus on the Machine's Control Panel
    • Changing the Paper Type
    • Managing User Information
      • Starting Starting User Management Tool
      • Displaying the Number of Sheets Printed
      • Exporting the information about the number of pages printed
      • Resetting the number of pages printed to 0.
      • Restricting Functions
      • Setting Applicable Functions to New Users
    • Configuring the Energy Saver Mode
    • Setting a Password
    • Checking the Machine Status
    • Changing Names and Comments
    • Load Fax Journal
    • Viewing and Deleting Spool Print Jobs
    • Managing Address Information
  • Using SmartDeviceMonitor for Client
    • Monitoring Printers
    • Checking the Machine Status
    • When Using IPP with SmartDeviceMonitor for Client
  • Printer Status Notification by E-Mail
    • Auto E-mail Notification
    • On-demand E-mail Notification
    • Mail authentication
    • On-demand E-mail Notification
  • Remote Maintenance by telnet
    • Using telnet
    • access
    • appletalk
    • authfree
    • autonet
    • bonjour(rendezvous)
    • btconfig
    • devicename
    • dhcp
    • diprint
    • dns
    • domainname
    • help
    • hostname
    • ifconfig
    • info
    • ipp
    • ipv6
    • lpr
    • netware
    • passwd
    • prnlog
    • route
    • set
    • show
    • slp
    • smb
    • snmp
    • sntp
    • spoolsw
    • sprint
    • ssdp
    • ssh
    • status
    • syslog
    • upnp
    • web
    • wiconfig
    • wins
  • SNMP
  • Getting Printer Information over the Network
    • Current Printer Status
    • Printer configuration
  • Understanding the Displayed Information
    • Print Job Information
    • Print Log Information
    • Configuring the Network Interface Board
  • Message List
    • System Log Information
• 3. Special Operations under Windows
  • Printing Files Directly from Windows
    • Setup
    • Using a Host Name Instead of an IPv4 Address
      • When using DNS
      • When setting the IPv4 address of a printer using DHCP
      • In other cases
    • Printing Commands
      • lpr
      • rcp
      • ftp/sftp
• 4. Appendix
  • When Using Windows Terminal Service / MetaFrame
    • Operating Environment
    • Supported Printer Drivers
    • Limitations
  • Using DHCP
    • Using AutoNet
  • Precautions
    • Connecting a Dial-Up Router to a Network
      • When using NetWare (file server)
      • When Using Network Utility
    • NetWare Printing
      • Form feed
      • Banner page
      • Printing after resetting the machine
    • When the optional IEEE 802.11b interface unit Is Installed
  • Information about Installed Applications
    • RSA® BSAFE
  • Specifications
• INDEX