TC80 High Temperature Thermocouple Assembly BR En Us 18275
User Manual: TC80
Open the PDF directly: View PDF 
.
Page Count: 6
| Download | |
| Open PDF In Browser | View PDF |
Thermocouples TC80 - High Temperature Thermocouple Assembly Type R (Pt-13%Rh/Pt), Type S (Pt-10%Rh/Pt), Type B (Pt/30%Rh-Pt/6%Rh), Sensor Element: Type K (NiCr-Ni), Type J (Fe-CuNi), Temperature range: Number of sensors: Classification tolerance: Features: The assembly can be supplied with or without a transmitter. Transmitters convert the millivolt input from the thermocouple to a linear analogue or digital output (commonly 4-20 mA). This signal reduces potential inaccuracies in the circuit and negates the requirement for thermocouple extension wire. Type N (NiCrSi-NiSi) 0 °C to +1700 °C (depending upon element and tube material) A variety of neck extensions are possible providing a fixture from the enclosure (connection head) to the assembly. 2-wire single circuit Manufactured from the finest high purity, high temperature ceramics and materials. 4-wire dual circuit Class 3, class 2 and class 1 per DIN EN 60584 ISA standard and special to ANSI MC96.1-1982 Lengths and diameters standard or customer specific Transmitter mounted directly within connection head or on measuring insert DIN plate Calibration - single point and multiple points Material traceability of the thermocouple alloys and inner/outer tube material Selectable accuracy tolerance Options: WIKA worldwide Thermocouple temperature ranges are dependent on element calibration and inner/outer tube material. Type E (NiCr-CuNi), Exchangeable measuring insert Special designs and materials Electrical Temperature Measurement Pure ceramic insulators and tubes are used in conjunction with noble metal thermocouples. These provide greater resistance against contamination and premature degradation. A purge assembly option is available to remove any contaminant gasses that may pass from the process to the inside of the assembly tubes. An optional pressure seal is available to prevent the potential migration of contaminant gasses from entering the electrical enclosure. A variety of process connections to suit the desired application. Secondary sealing can be included as an extra safeguard in the event of thermal or mechanical fatigue of the protective tube. The tubes available provide good thermal and mechanical shock resistance. A metal support tube can be attached over the ceramic tube when there is the possibility of any movement of the refractory lining. The length of the metal support tube should be comparable to the thickness of the refractory wall. A variety of wire sizes are available. North America Africa/Middle East Canada WIKA Instruments Canada Ltd. Edmonton, Alberta Tel.: (+1) 780 463 7035 Fax: (+1) 780 462 0017 E-mail: info@wika.ca www.wika.ca Benelux WIKA Benelux Echt Tel.: (+31) 475 53 55 00 Fax: (+31) 475 53 54 46 E-mail: info@wika.nl www.wika.nl Romania WIKA Instruments Romania S.R.L. Bucuresti Tel.: (+40) 21-456 31 38 Fax: (+40) 21-456 31 37 E-mail: m.anghel@wika.ro www.wika.ro Egypt WIKA Alexander Wiegand GmbH & Co. KG Nasr City, Cairo Tel.: (+20) 2-227 33 140 Fax: (+20) 2-227 33 140 E-mail: Ahmed.Azab@wika.de Kazakhstan TOO WIKA Kasachstan Almaty Tel.: (+7) 3272 33 08 48 Fax: (+7) 3272 78 99 05 E-mail: info@wika.kz www.wika.kz Mexico Instrumentos WIKA México, S.A. de C.V. Álvaro Obregón Tel.: (+52) 55 5020 5300 Fax: (+52) 55 5020 5301 E-mail: ventas@wika.com www.wika.com.mx Bulgaria WIKA Bulgaria EOOD Sofia Tel.: (+359) 2 82138-10 Fax: (+359) 2 82138-13 E-mail: t.antonov@wika.bg www.wika.bg Russia ZAO “WIKA MERA” Moskau Tel.: (+7) 495-648 01 80 Fax: (+7) 495-648 01 81 E-mail: info@wika.ru www.wika.ru Korea WIKA Korea Ltd. Seoul Tel.: (+82) 2-869 05 05 Fax: (+82) 2-869 05 25 E-mail: info@wika.co.kr www.wika.co.kr Finland WIKA Finland Oy Helsinki Tel.: (+358) 9-682 49 20 Fax: (+358) 9-682 49 270 E-mail: info@wika.fi www.wika.fi Serbia WIKA Merna Tehnika d.o.o. Beograd Tel.: (+381) 11 2763 722 Fax: (+381) 11-753 674 E-mail: info@wika.co.yu www.wika.co.yu Iran WIKA Instrumentation Pars Kish Ltd. Tehran Tel.: (+98) 21- 8852 6730 3 Fax: (+98) 21- 8875 7413 E-mail: info@wika.ir www.wika.ir France WIKA Instruments s.a.r.l. Eragny-sur-Oise Tel.: (+33) 1/34 30 84 84 Fax: (+33) 1/34 30 84 94 E-mail: info@wika.fr www.wika.fr Spain Instrumentos WIKA, S.A. Sabadell (Barcelona) Tel.: (+34) 902 902 577 Fax: (+34) 933 938 666 E-mail: info@wika.es www.wika.es Germany - Head Office WIKA Alexander Wiegand GmbH & Co. KG Klingenberg Tel.: (+49) 9372 132-0 Fax: (+49) 9372 132-406 E-mail: info@wika.de www.wika.de Switzerland MANOMETER AG Hitzkirch Tel.: (+41) 41 919 72 72 Fax: (+41) 41 919 72 73 E-mail: info@manometer.ch www.manometer.ch USA WIKA Instrument Corporation Lawrenceville, Georgia Tel.: (+1) 770-513 8200 Fax: (+1) 770-338 5118 E-mail: info@wika.com www.wika.com South America Argentina WIKA Argentina S.A. Buenos Aires Tel.: (+54) 11 4730-1800 Fax: (+54) 11 4761-0050 E-mail: info@wika.com.ar www.wika.com.ar Brazil WIKA DO BRASIL Iperó - SP Tel.: (+55) 15 3459 9700 Fax: (+55) 15 3266 1650 E-mail: marketing@wika.com.br www.wika.com.br Europe Austria WIKA Meßgerätevertrieb Ursula Wiegand GmbH & Co. KG Wien Tel.: (+43) 1-8 69 16 31 Fax: (+43) 1-8 69 16 34 E-mail: info@wika.at www.wika.at Thermocouple transmitter matching Air or inert gas purge system / pressure test connection Pressure seal Protective outer tube Flanged or threaded connections Metal support sleeve Various thermocouple wire sizes 103-02033 11/2007 CA Italy WIKA Italiana SRL Arese (Milano) Tel.: (+39) 02-93 86 11 Fax: (+39) 02-93 86 174 E-mail: info@wika.it www.wika.it Poland Kujawska Fabryka Manometrow Wloclawek Tel.: (+48) 54230 11 00 Fax: (+48) 54230 11 01 E-mail: info@manometry.com.pl www.manometry.com.pl Ukraine WIKA Pribor GmbH Donetsk Tel.: (+38) 062 345-34-16 Fax: (+38) 062 345-34-17 E-mail: info@wika.donetsk.ua www.wika.donetsk.ua United Kingdom WIKA Instruments Limited Merstham, Redhill Tel.: (+44) (0) 1737 644 008 Fax: (+44) (0) 1737 644 403 E-mail: info@wika.co.uk www.wika.co.uk South Africa WIKA Instruments (Pty.) Ltd. Gardenview, Johannesburg Tel.: (+27) 11-621 00 00 Fax: (+27) 11-621 00 59 E-mail: sales@wika.co.za www.wika.co.za United Arab Emirates WIKA Middle East FZE Jebel Ali, Dubai Tel.: (+971) 4-883 90 90 Fax: (+971) 4-883 91 98 E-mail: wikame@emirates.net.ae Asia China WIKA International Trading (Shanghai) Co., Ltd. Shanghai Tel.: (+86) 21 53 85 25 72 Fax: (+86) 21 53 85 25 75 E-mail: wikash@online.sh.cn India WIKA Instruments India Pvt. Ltd. Wagholi, Pune Tel.: (+91) 20-66293200 Fax: (+91) 20-66293325 E-mail: sales@wika.co.in www.wika.co.in Japan WIKA Japan K.K. Minato-ku, Tokyo Tel.: (+81) 3-5439-6673 Fax: (+81) 3-5439-6674 E-mail: t-shimane@wika.co.jp Malaysia WIKA Instrumentation (M) Sdn Bhd Puchong, Selangor Tel.: (+03) 80631080 Fax: (+03) 80631070 E-mail: info@wika.com.my www.wika.com.my Singapore WIKA Instrumentation PTE. LTD. Singapore Tel.: (+65) 6844 55 06 Fax: (+65) 6844 55 07 E-mail: info@wika.com.sg www.wika.com.sg Taiwan WIKA Instrumentation Taiwan Ltd. Pinjen, Taoyuan Tel.: (+886) 3 420 6052 Fax: (+886) 3 490 0080 E-mail: info@wika.com.tw www.wika.com.tw Australia Australia WIKA Australia Pty. Ltd. Rydalmere NSW Tel.: (+61) 2 8845 5222 Fax: (+61) 2 9684 4767 E-mail: sales@wika.com.au www.wika.com.au TC80 High Temperature Thermocouple Assembly TC80 Part Number N 1 TC80 series thermocouple assemblies are designed for measuring extreme high temperatures. They are manufactured using high purity U X R N refractory wall. These designs have options for air or inert gas Applications: 2 Cement Plants M Chemical and petrochemical industries 6 3 Energy and power plant technology Glass, porcelain and ceramics industries 11 Outer tube diameter (S e e N ot e s * ) 15 Process connection (S e e N ot e s * ) 3 3/4 inch x 9/16 inch * 1 A 1 1/2 inch, 150 lbs, RF, 316 SS * 1 5 G 8 AWG PTA silicon carbide protection tube (North American standard) 8 T19 (Analogue Transmitter) 4 7/8 inch x 5/8 inch * 2 B 1 1/2 inch, 150 lbs, RF, A105 C/S * 1 5 J 14 AWG 5/8 inch x 3/8 inch * 3 1 1/2 inch, 300 lbs, RF, 316 SS * 1 5 T32 (HART® Transmitter) 6 C 6 M 20 AWG 1 1/2 inch, 300 lbs, RF, A105 C/S * 1 5 T53 (Fieldbus Foundation / PROFIBUS PA Transmitter) 3/4 inch x 1/2 inch * 3 D 9 7 1 Ø 0.35 mm 8 1 inch x 1/2 inch * 3 E 2 inch, 150 lbs, RF, 316 SS * 1 5 2 Ø 0.50 mm 9 1 1/4 inch x 3/4 inch * 3 F 3 Ø 0.20 mm 5 1 3/4 inch x 1 inch * 4 G 2 inch, 300 lbs, RF, 316 SS * 1 5 4 Ø 1.00 mm F 26 mm x 18 mm * 5 H 2 inch, 300 lbs, RF, A105 C/S * 1 5 5 Ø 3.00 mm G 24 mm x 19 mm * I 3 inch, 150 lbs, RF, 316 SS * 1 5 D 16 mm x 12 mm * 6 J 3 inch, 150 lbs, RF, A105 C/S * 1 5 K 3 inch, 300 lbs, RF, 316 SS * B AMK per DIN 43733 (metal protection tube with ceramic inner tube, head form A) AK per DIN 43733 (ceramic protection tube, head form A) X 7 AKK per DIN 43733 (ceramic protection tube with ceramic inner tube, head form A) BK per DIN 43733 (ceramic protection tube, head form B) Metric 9 1000 S (Stainless steel) 7 KN4-A (Aluminum) ASZ-H (Aluminum) with set screws Nipple A Nipple-Union P Threaded pipe sleeve Without S Stainless steel 316 (1.4401) E Carbon steel Z Without 15 mm x 11 mm * 7 K 10 mm x 7 mm * 6 A 24 mm x 18 mm * C 15 mm x 10 mm * 9 E 10 mm x 6 mm * 9 B 22 mm x 18 mm * 1 0 8 Inner tube material Alumina Ceramic (99.7 % purity) C610 Ceramic (approx. 60 % purity) J C799 Ceramic (99.7 % purity) Standard M Mullite (approx. 60 % purity) 2 With air purge Z Without 3 With pressure test connection 4 With ceramic seal Assembly option 13 With ceramic seal and pressure test connection Outer tube material BS (Aluminum) with set screws A Alumina Ceramic (99.7 % purity) C BSZ (Aluminum) with set screws I C610 Ceramic (approx. 60 % purity) X BSZ-H (Aluminum) with set screws Cable entry I I W Without 12 6 A 5 10 Metallic support tube Neck material 1 1000 F (Aluminum) Without / prepared for transmitter E Z 8 T91.10 (Analogue Transmitter, DIN form B) Neck extension B Imperial V M B Mullite (approx. 60 % purity) Metal Ceramic C Hexaloy K Silicon Carbide RSiC Inner tube diameter (S e e N ot e s * ) 1 3/8 inch x 1/4 inch * 1 1 2 11/16 inch x 7/16 inch * 1 1 3 3/4 inch x 9/16 inch * D 16 mm x 12 mm * 1 2 I 15 mm x 11 mm * 1 2 K 10 mm x 7 mm * C 15 mm x 10 mm * 1 3 E 10 mm x 6 mm * 1 3 Z 14 16 11 2 inch, 150 lbs, RF, A105 C/S * 1 5 L 3 inch, 300 lbs, RF, A105 C/S * 1 5 M 4 inch, 150 lbs, RF, 316 SS * 1 5 N 4 inch, 150 lbs, RF, A105 C/S * 1 5 O 4 inch, 300 lbs, RF, 316 SS * 1 5 P 4 inch, 300 lbs, RF, A105 C/S * 1 5 1 G 1/2, carbon steel * 1 6 2 G 3/4, carbon steel * 1 6 3 G 1, carbon steel * 1 6 4 G 1 1/4, carbon steel * 1 6 5 Dimensions adapted to thermowell, malleable cast iron * 1 7 6 With mating flange, dimensions adapted to thermowell, malleable cast iron * 1 7 Z Without Process connection design 50 mm 75 mm H 100 mm I 125 mm J 150 mm 22 23 24 25 26 Z Without ZZZZ 11 Use only with codes A or M for Inner tube material (Field 12) 12 Use only with code I for Inner tube material (Field 12) 13 Use only with code J for Inner tube material (Field 12) 14 Use only with code 6 for Process connection design (Field 14) 15 Use only with codes 7, 8 or 9 for Process connection design (Field 14) 16 Use only with code 4 for Process connection design (Field 14) 17 Use only with code 5 for Process connection design (Field 14) ZZZ Without Steel (1.4762) 9 Flange (cemented) 8 ISA standard to ANSI MC96.1-1982 Steel (1.4841) 4 Threaded bushing (adjustable) 9 ISA special to ANSI MC96.1-1982 F 3/4 NPT 5 Stop flange DIN 43734 (adjustable) 2 Class 2 per DIN EN 60584 E Straight, fixed with two set screws Z Without 1 Class 1 per DIN EN 60584 Z Without 3 Class 3 per DIN EN 60584 Notes Use only with codes D, E, F or G for Outer tube material (Field 10) 350 mm F Without 10 300 mm G Additional Text Use only with code J for Outer tube material (Field 10) 350 Classification tolerance T Z 9 300 Flange (partial penetration welded, 6 mm fillet) Additional order details Use only with codes D, E, F, G or J for Outer tube material (Field 10) 200 mm 8 Without 8 200 Carbon steel (1.0305), enamelled Quality certificates Use only with codes D, E, F, G or I for Outer tube material (Field 10) 150 mm E 1 Z 7 80 mm Single Certificates Use only with code I for Outer tube material (Field 10) 150 1 Without 6 080 Flange (full penetration welded) 2000 mm ZZZZZ Use only with codes H or K for Outer tube material (Field 10) 7.5 inch (Air Purge only) 7 1400 mm 02000 5 075 Carbon steel (1.0305) 01400 Without Type E (NiCr-CuNi) / 0...+870 °C D 1000 mm Use only with code K for Outer tube material (Field 10) 7 Without 710 mm 01000 4 4.2 inch Dual 500 mm 00710 Please specify (e.g. 84 mm = 0084) (e.g. 9.5 inch = 0950) 1.0 inch 2 355 mm 00500 Use only with code C for Outer tube material (Field 10) 042 Double threaded hex bushing 26 00355 3 010 6 25 Please specify (e.g. 844 mm = 00844) (e.g. 9.5 inch = 00950) Use only with code B for Outer tube material (Field 10) Type N (NiCrSi-NiSi) / 0...+1260 °C Number of sensors ***** 2 5 23 A-Dimension (A) Use only with codes A, I or M for Outer tube material (Field 10) X-Dimension (X) **** 22 24 1 Type J (Fe-CuNi) / 0...+760 °C M20 x 1.5 KN4-A F G Type K (NiCr-Ni) / 0...+1260 °C T 1000F 1000S 6.0 inch 3 Z BSZ-H E 1 Imperial Grid 1” x 1” BSZ 5.0 inch ZZZZZ C530 Ceramic (approx. 73 - 75 % purity) BS D B C799 Ceramic (99.7 % purity) ASZ-H 4.0 inch ***** J 1/2 NPT 3.0 inch Type B (Pt/30%Rh-Pt/6%Rh) +870...1700 °C (ANSI), +600...+1700 °C (DIN) H S B C S 3/4 NPT Head instrument connection 2.0 inch Type S (Pt-10%Rh/Pt) 0...+1480 °C (ANSI), 0...+1600 °C (DIN) F 18 A R Connection Heads ASZ 21 H-Dimension (H) Type R (Pt-13%Rh/Pt) 0...+1480 °C (ANSI), 0...+1600 °C (DIN) 1/2 NPT 17 21 Element 12 Without 20 15 S AS 20 Wire gauge of sensor T12 (Programmable Digital Transmitter) Power and Utilities 5 19 3 ASZ (Aluminum) with set screws 4 Terminal block / Transmitter PTA ceramic protection tube (North American standard) 6 Z 19 26 AWG U Sulphur Recovery Plants 18 24 AWG AS (Aluminum) with set screws Smelting Plants 17 P T Semi-Conductor Industries 16 O Incinerators Reactors 15 3/4 NPT, stainless steel * 1 4 Connection head 5 Furnaces, kilns, ovens and boilers 14 8 Unit of measure I 13 11/16 inch x 7/16 inch * 1 BMK per DIN 43733 (metal protection tube with ceramic inner tube, head form B) U TC80 series assemblies are suitable for measuring the radiant temperatures in most industrial and commercial high temperature applications including: 12 2 T U 11 Ceramic terminal block BM per DIN 43733 (metal protection tube, head form B) X 10 2 S H purging, pressure seals, and rugged outer protection tubes. 9 1/2 NPT, stainless steel * 1 4 AM per DIN 43733 (metal protection tube, head form A) A wide variety of designs are available that include connection to 8 7 P O 7 3/8 inch x 1/4 inch * 1 there is contact with noble metal thermocouple sensors (Types R, S, with standard thermocouple sensors or as outer protection tubes. 6 1 PTA metal/ceramic protection tube (North American standard) and corrosion resistant metals can be used when there is contact 5 Crastin terminal block V Q 4 1 High purity and high temperature ceramics must be used when and B having platinum and platinum/rhodium elements). Oxidation 3 TC80-XXXXXXXXX-XXXX-XX-XXXXXXXXXXXXXXXXXXXXXX-XX Thermocouple assembly description Y and high temperature ceramics as well as oxidation and corrosion process flanges, threaded fittings and direct mounting into a furnace 2 Code ~2" (~50 mm) resistant metals. 1 Note: Some configurations are unavailable. Your WIKA sales person will notify you if you have made an incorrect selection Imperial TC80 High Temperature Thermocouple Assembly Create your product part number by selecting the appropriate assembly items from each of the categories below. Enter the item code into the applicable box to generate the part number. Metric Part of Your Business U-Dimension (U) Please specify (e.g. 84 mm = 00084) (e.g. 9.5 inch = 00950) Without N-Dimension (N) Thermocouples TC80 - High Temperature Thermocouple Assembly Type R (Pt-13%Rh/Pt), Type S (Pt-10%Rh/Pt), Type B (Pt/30%Rh-Pt/6%Rh), Sensor Element: Type K (NiCr-Ni), Type J (Fe-CuNi), Temperature range: Number of sensors: Classification tolerance: Features: The assembly can be supplied with or without a transmitter. Transmitters convert the millivolt input from the thermocouple to a linear analogue or digital output (commonly 4-20 mA). This signal reduces potential inaccuracies in the circuit and negates the requirement for thermocouple extension wire. Type N (NiCrSi-NiSi) 0 °C to +1700 °C (depending upon element and tube material) A variety of neck extensions are possible providing a fixture from the enclosure (connection head) to the assembly. 2-wire single circuit Manufactured from the finest high purity, high temperature ceramics and materials. 4-wire dual circuit Class 3, class 2 and class 1 per DIN EN 60584 ISA standard and special to ANSI MC96.1-1982 Lengths and diameters standard or customer specific Transmitter mounted directly within connection head or on measuring insert DIN plate Calibration - single point and multiple points Material traceability of the thermocouple alloys and inner/outer tube material Selectable accuracy tolerance Options: WIKA worldwide Thermocouple temperature ranges are dependent on element calibration and inner/outer tube material. Type E (NiCr-CuNi), Exchangeable measuring insert Special designs and materials Electrical Temperature Measurement Pure ceramic insulators and tubes are used in conjunction with noble metal thermocouples. These provide greater resistance against contamination and premature degradation. A purge assembly option is available to remove any contaminant gasses that may pass from the process to the inside of the assembly tubes. An optional pressure seal is available to prevent the potential migration of contaminant gasses from entering the electrical enclosure. A variety of process connections to suit the desired application. Secondary sealing can be included as an extra safeguard in the event of thermal or mechanical fatigue of the protective tube. The tubes available provide good thermal and mechanical shock resistance. A metal support tube can be attached over the ceramic tube when there is the possibility of any movement of the refractory lining. The length of the metal support tube should be comparable to the thickness of the refractory wall. A variety of wire sizes are available. North America Africa/Middle East Canada WIKA Instruments Canada Ltd. Edmonton, Alberta Tel.: (+1) 780 463 7035 Fax: (+1) 780 462 0017 E-mail: info@wika.ca www.wika.ca Benelux WIKA Benelux Echt Tel.: (+31) 475 53 55 00 Fax: (+31) 475 53 54 46 E-mail: info@wika.nl www.wika.nl Romania WIKA Instruments Romania S.R.L. Bucuresti Tel.: (+40) 21-456 31 38 Fax: (+40) 21-456 31 37 E-mail: m.anghel@wika.ro www.wika.ro Egypt WIKA Alexander Wiegand GmbH & Co. KG Nasr City, Cairo Tel.: (+20) 2-227 33 140 Fax: (+20) 2-227 33 140 E-mail: Ahmed.Azab@wika.de Kazakhstan TOO WIKA Kasachstan Almaty Tel.: (+7) 3272 33 08 48 Fax: (+7) 3272 78 99 05 E-mail: info@wika.kz www.wika.kz Mexico Instrumentos WIKA México, S.A. de C.V. Álvaro Obregón Tel.: (+52) 55 5020 5300 Fax: (+52) 55 5020 5301 E-mail: ventas@wika.com www.wika.com.mx Bulgaria WIKA Bulgaria EOOD Sofia Tel.: (+359) 2 82138-10 Fax: (+359) 2 82138-13 E-mail: t.antonov@wika.bg www.wika.bg Russia ZAO “WIKA MERA” Moskau Tel.: (+7) 495-648 01 80 Fax: (+7) 495-648 01 81 E-mail: info@wika.ru www.wika.ru Korea WIKA Korea Ltd. Seoul Tel.: (+82) 2-869 05 05 Fax: (+82) 2-869 05 25 E-mail: info@wika.co.kr www.wika.co.kr Finland WIKA Finland Oy Helsinki Tel.: (+358) 9-682 49 20 Fax: (+358) 9-682 49 270 E-mail: info@wika.fi www.wika.fi Serbia WIKA Merna Tehnika d.o.o. Beograd Tel.: (+381) 11 2763 722 Fax: (+381) 11-753 674 E-mail: info@wika.co.yu www.wika.co.yu Iran WIKA Instrumentation Pars Kish Ltd. Tehran Tel.: (+98) 21- 8852 6730 3 Fax: (+98) 21- 8875 7413 E-mail: info@wika.ir www.wika.ir France WIKA Instruments s.a.r.l. Eragny-sur-Oise Tel.: (+33) 1/34 30 84 84 Fax: (+33) 1/34 30 84 94 E-mail: info@wika.fr www.wika.fr Spain Instrumentos WIKA, S.A. Sabadell (Barcelona) Tel.: (+34) 902 902 577 Fax: (+34) 933 938 666 E-mail: info@wika.es www.wika.es Germany - Head Office WIKA Alexander Wiegand GmbH & Co. KG Klingenberg Tel.: (+49) 9372 132-0 Fax: (+49) 9372 132-406 E-mail: info@wika.de www.wika.de Switzerland MANOMETER AG Hitzkirch Tel.: (+41) 41 919 72 72 Fax: (+41) 41 919 72 73 E-mail: info@manometer.ch www.manometer.ch USA WIKA Instrument Corporation Lawrenceville, Georgia Tel.: (+1) 770-513 8200 Fax: (+1) 770-338 5118 E-mail: info@wika.com www.wika.com South America Argentina WIKA Argentina S.A. Buenos Aires Tel.: (+54) 11 4730-1800 Fax: (+54) 11 4761-0050 E-mail: info@wika.com.ar www.wika.com.ar Brazil WIKA DO BRASIL Iperó - SP Tel.: (+55) 15 3459 9700 Fax: (+55) 15 3266 1650 E-mail: marketing@wika.com.br www.wika.com.br Europe Austria WIKA Meßgerätevertrieb Ursula Wiegand GmbH & Co. KG Wien Tel.: (+43) 1-8 69 16 31 Fax: (+43) 1-8 69 16 34 E-mail: info@wika.at www.wika.at Thermocouple transmitter matching Air or inert gas purge system / pressure test connection Pressure seal Protective outer tube Flanged or threaded connections Metal support sleeve Various thermocouple wire sizes 103-02033 11/2007 CA Italy WIKA Italiana SRL Arese (Milano) Tel.: (+39) 02-93 86 11 Fax: (+39) 02-93 86 174 E-mail: info@wika.it www.wika.it Poland Kujawska Fabryka Manometrow Wloclawek Tel.: (+48) 54230 11 00 Fax: (+48) 54230 11 01 E-mail: info@manometry.com.pl www.manometry.com.pl Ukraine WIKA Pribor GmbH Donetsk Tel.: (+38) 062 345-34-16 Fax: (+38) 062 345-34-17 E-mail: info@wika.donetsk.ua www.wika.donetsk.ua United Kingdom WIKA Instruments Limited Merstham, Redhill Tel.: (+44) (0) 1737 644 008 Fax: (+44) (0) 1737 644 403 E-mail: info@wika.co.uk www.wika.co.uk South Africa WIKA Instruments (Pty.) Ltd. Gardenview, Johannesburg Tel.: (+27) 11-621 00 00 Fax: (+27) 11-621 00 59 E-mail: sales@wika.co.za www.wika.co.za United Arab Emirates WIKA Middle East FZE Jebel Ali, Dubai Tel.: (+971) 4-883 90 90 Fax: (+971) 4-883 91 98 E-mail: wikame@emirates.net.ae Asia China WIKA International Trading (Shanghai) Co., Ltd. Shanghai Tel.: (+86) 21 53 85 25 72 Fax: (+86) 21 53 85 25 75 E-mail: wikash@online.sh.cn India WIKA Instruments India Pvt. Ltd. Wagholi, Pune Tel.: (+91) 20-66293200 Fax: (+91) 20-66293325 E-mail: sales@wika.co.in www.wika.co.in Japan WIKA Japan K.K. Minato-ku, Tokyo Tel.: (+81) 3-5439-6673 Fax: (+81) 3-5439-6674 E-mail: t-shimane@wika.co.jp Malaysia WIKA Instrumentation (M) Sdn Bhd Puchong, Selangor Tel.: (+03) 80631080 Fax: (+03) 80631070 E-mail: info@wika.com.my www.wika.com.my Singapore WIKA Instrumentation PTE. LTD. Singapore Tel.: (+65) 6844 55 06 Fax: (+65) 6844 55 07 E-mail: info@wika.com.sg www.wika.com.sg Taiwan WIKA Instrumentation Taiwan Ltd. Pinjen, Taoyuan Tel.: (+886) 3 420 6052 Fax: (+886) 3 490 0080 E-mail: info@wika.com.tw www.wika.com.tw Australia Australia WIKA Australia Pty. Ltd. Rydalmere NSW Tel.: (+61) 2 8845 5222 Fax: (+61) 2 9684 4767 E-mail: sales@wika.com.au www.wika.com.au TC80 High Temperature Thermocouple Assembly TC80 Part Number N 1 TC80 series thermocouple assemblies are designed for measuring extreme high temperatures. They are manufactured using high purity U X R N refractory wall. These designs have options for air or inert gas Applications: 2 Cement Plants M Chemical and petrochemical industries 6 3 Energy and power plant technology Glass, porcelain and ceramics industries 11 Outer tube diameter (S e e N ot e s * ) 15 Process connection (S e e N ot e s * ) 3 3/4 inch x 9/16 inch * 1 A 1 1/2 inch, 150 lbs, RF, 316 SS * 1 5 G 8 AWG PTA silicon carbide protection tube (North American standard) 8 T19 (Analogue Transmitter) 4 7/8 inch x 5/8 inch * 2 B 1 1/2 inch, 150 lbs, RF, A105 C/S * 1 5 J 14 AWG 5/8 inch x 3/8 inch * 3 1 1/2 inch, 300 lbs, RF, 316 SS * 1 5 T32 (HART® Transmitter) 6 C 6 M 20 AWG 1 1/2 inch, 300 lbs, RF, A105 C/S * 1 5 T53 (Fieldbus Foundation / PROFIBUS PA Transmitter) 3/4 inch x 1/2 inch * 3 D 9 7 1 Ø 0.35 mm 8 1 inch x 1/2 inch * 3 E 2 inch, 150 lbs, RF, 316 SS * 1 5 2 Ø 0.50 mm 9 1 1/4 inch x 3/4 inch * 3 F 3 Ø 0.20 mm 5 1 3/4 inch x 1 inch * 4 G 2 inch, 300 lbs, RF, 316 SS * 1 5 4 Ø 1.00 mm F 26 mm x 18 mm * 5 H 2 inch, 300 lbs, RF, A105 C/S * 1 5 5 Ø 3.00 mm G 24 mm x 19 mm * I 3 inch, 150 lbs, RF, 316 SS * 1 5 D 16 mm x 12 mm * 6 J 3 inch, 150 lbs, RF, A105 C/S * 1 5 K 3 inch, 300 lbs, RF, 316 SS * B AMK per DIN 43733 (metal protection tube with ceramic inner tube, head form A) AK per DIN 43733 (ceramic protection tube, head form A) X 7 AKK per DIN 43733 (ceramic protection tube with ceramic inner tube, head form A) BK per DIN 43733 (ceramic protection tube, head form B) Metric 9 1000 S (Stainless steel) 7 KN4-A (Aluminum) ASZ-H (Aluminum) with set screws Nipple A Nipple-Union P Threaded pipe sleeve Without S Stainless steel 316 (1.4401) E Carbon steel Z Without 15 mm x 11 mm * 7 K 10 mm x 7 mm * 6 A 24 mm x 18 mm * C 15 mm x 10 mm * 9 E 10 mm x 6 mm * 9 B 22 mm x 18 mm * 1 0 8 Inner tube material Alumina Ceramic (99.7 % purity) C610 Ceramic (approx. 60 % purity) J C799 Ceramic (99.7 % purity) Standard M Mullite (approx. 60 % purity) 2 With air purge Z Without 3 With pressure test connection 4 With ceramic seal Assembly option 13 With ceramic seal and pressure test connection Outer tube material BS (Aluminum) with set screws A Alumina Ceramic (99.7 % purity) C BSZ (Aluminum) with set screws I C610 Ceramic (approx. 60 % purity) X BSZ-H (Aluminum) with set screws Cable entry I I W Without 12 6 A 5 10 Metallic support tube Neck material 1 1000 F (Aluminum) Without / prepared for transmitter E Z 8 T91.10 (Analogue Transmitter, DIN form B) Neck extension B Imperial V M B Mullite (approx. 60 % purity) Metal Ceramic C Hexaloy K Silicon Carbide RSiC Inner tube diameter (S e e N ot e s * ) 1 3/8 inch x 1/4 inch * 1 1 2 11/16 inch x 7/16 inch * 1 1 3 3/4 inch x 9/16 inch * D 16 mm x 12 mm * 1 2 I 15 mm x 11 mm * 1 2 K 10 mm x 7 mm * C 15 mm x 10 mm * 1 3 E 10 mm x 6 mm * 1 3 Z 14 16 11 2 inch, 150 lbs, RF, A105 C/S * 1 5 L 3 inch, 300 lbs, RF, A105 C/S * 1 5 M 4 inch, 150 lbs, RF, 316 SS * 1 5 N 4 inch, 150 lbs, RF, A105 C/S * 1 5 O 4 inch, 300 lbs, RF, 316 SS * 1 5 P 4 inch, 300 lbs, RF, A105 C/S * 1 5 1 G 1/2, carbon steel * 1 6 2 G 3/4, carbon steel * 1 6 3 G 1, carbon steel * 1 6 4 G 1 1/4, carbon steel * 1 6 5 Dimensions adapted to thermowell, malleable cast iron * 1 7 6 With mating flange, dimensions adapted to thermowell, malleable cast iron * 1 7 Z Without Process connection design 50 mm 75 mm H 100 mm I 125 mm J 150 mm 22 23 24 25 26 Z Without ZZZZ 11 Use only with codes A or M for Inner tube material (Field 12) 12 Use only with code I for Inner tube material (Field 12) 13 Use only with code J for Inner tube material (Field 12) 14 Use only with code 6 for Process connection design (Field 14) 15 Use only with codes 7, 8 or 9 for Process connection design (Field 14) 16 Use only with code 4 for Process connection design (Field 14) 17 Use only with code 5 for Process connection design (Field 14) ZZZ Without Steel (1.4762) 9 Flange (cemented) 8 ISA standard to ANSI MC96.1-1982 Steel (1.4841) 4 Threaded bushing (adjustable) 9 ISA special to ANSI MC96.1-1982 F 3/4 NPT 5 Stop flange DIN 43734 (adjustable) 2 Class 2 per DIN EN 60584 E Straight, fixed with two set screws Z Without 1 Class 1 per DIN EN 60584 Z Without 3 Class 3 per DIN EN 60584 Notes Use only with codes D, E, F or G for Outer tube material (Field 10) 350 mm F Without 10 300 mm G Additional Text Use only with code J for Outer tube material (Field 10) 350 Classification tolerance T Z 9 300 Flange (partial penetration welded, 6 mm fillet) Additional order details Use only with codes D, E, F, G or J for Outer tube material (Field 10) 200 mm 8 Without 8 200 Carbon steel (1.0305), enamelled Quality certificates Use only with codes D, E, F, G or I for Outer tube material (Field 10) 150 mm E 1 Z 7 80 mm Single Certificates Use only with code I for Outer tube material (Field 10) 150 1 Without 6 080 Flange (full penetration welded) 2000 mm ZZZZZ Use only with codes H or K for Outer tube material (Field 10) 7.5 inch (Air Purge only) 7 1400 mm 02000 5 075 Carbon steel (1.0305) 01400 Without Type E (NiCr-CuNi) / 0...+870 °C D 1000 mm Use only with code K for Outer tube material (Field 10) 7 Without 710 mm 01000 4 4.2 inch Dual 500 mm 00710 Please specify (e.g. 84 mm = 0084) (e.g. 9.5 inch = 0950) 1.0 inch 2 355 mm 00500 Use only with code C for Outer tube material (Field 10) 042 Double threaded hex bushing 26 00355 3 010 6 25 Please specify (e.g. 844 mm = 00844) (e.g. 9.5 inch = 00950) Use only with code B for Outer tube material (Field 10) Type N (NiCrSi-NiSi) / 0...+1260 °C Number of sensors ***** 2 5 23 A-Dimension (A) Use only with codes A, I or M for Outer tube material (Field 10) X-Dimension (X) **** 22 24 1 Type J (Fe-CuNi) / 0...+760 °C M20 x 1.5 KN4-A F G Type K (NiCr-Ni) / 0...+1260 °C T 1000F 1000S 6.0 inch 3 Z BSZ-H E 1 Imperial Grid 1” x 1” BSZ 5.0 inch ZZZZZ C530 Ceramic (approx. 73 - 75 % purity) BS D B C799 Ceramic (99.7 % purity) ASZ-H 4.0 inch ***** J 1/2 NPT 3.0 inch Type B (Pt/30%Rh-Pt/6%Rh) +870...1700 °C (ANSI), +600...+1700 °C (DIN) H S B C S 3/4 NPT Head instrument connection 2.0 inch Type S (Pt-10%Rh/Pt) 0...+1480 °C (ANSI), 0...+1600 °C (DIN) F 18 A R Connection Heads ASZ 21 H-Dimension (H) Type R (Pt-13%Rh/Pt) 0...+1480 °C (ANSI), 0...+1600 °C (DIN) 1/2 NPT 17 21 Element 12 Without 20 15 S AS 20 Wire gauge of sensor T12 (Programmable Digital Transmitter) Power and Utilities 5 19 3 ASZ (Aluminum) with set screws 4 Terminal block / Transmitter PTA ceramic protection tube (North American standard) 6 Z 19 26 AWG U Sulphur Recovery Plants 18 24 AWG AS (Aluminum) with set screws Smelting Plants 17 P T Semi-Conductor Industries 16 O Incinerators Reactors 15 3/4 NPT, stainless steel * 1 4 Connection head 5 Furnaces, kilns, ovens and boilers 14 8 Unit of measure I 13 11/16 inch x 7/16 inch * 1 BMK per DIN 43733 (metal protection tube with ceramic inner tube, head form B) U TC80 series assemblies are suitable for measuring the radiant temperatures in most industrial and commercial high temperature applications including: 12 2 T U 11 Ceramic terminal block BM per DIN 43733 (metal protection tube, head form B) X 10 2 S H purging, pressure seals, and rugged outer protection tubes. 9 1/2 NPT, stainless steel * 1 4 AM per DIN 43733 (metal protection tube, head form A) A wide variety of designs are available that include connection to 8 7 P O 7 3/8 inch x 1/4 inch * 1 there is contact with noble metal thermocouple sensors (Types R, S, with standard thermocouple sensors or as outer protection tubes. 6 1 PTA metal/ceramic protection tube (North American standard) and corrosion resistant metals can be used when there is contact 5 Crastin terminal block V Q 4 1 High purity and high temperature ceramics must be used when and B having platinum and platinum/rhodium elements). Oxidation 3 TC80-XXXXXXXXX-XXXX-XX-XXXXXXXXXXXXXXXXXXXXXX-XX Thermocouple assembly description Y and high temperature ceramics as well as oxidation and corrosion process flanges, threaded fittings and direct mounting into a furnace 2 Code ~2" (~50 mm) resistant metals. 1 Note: Some configurations are unavailable. Your WIKA sales person will notify you if you have made an incorrect selection Imperial TC80 High Temperature Thermocouple Assembly Create your product part number by selecting the appropriate assembly items from each of the categories below. Enter the item code into the applicable box to generate the part number. Metric Part of Your Business U-Dimension (U) Please specify (e.g. 84 mm = 00084) (e.g. 9.5 inch = 00950) Without N-Dimension (N) TC80 Part Number N 1 TC80 series thermocouple assemblies are designed for measuring extreme high temperatures. They are manufactured using high purity U X R N refractory wall. These designs have options for air or inert gas Applications: 2 Cement Plants M Chemical and petrochemical industries 6 3 Energy and power plant technology Glass, porcelain and ceramics industries 11 Outer tube diameter (S e e N ot e s * ) 15 Process connection (S e e N ot e s * ) 3 3/4 inch x 9/16 inch * 1 A 1 1/2 inch, 150 lbs, RF, 316 SS * 1 5 G 8 AWG PTA silicon carbide protection tube (North American standard) 8 T19 (Analogue Transmitter) 4 7/8 inch x 5/8 inch * 2 B 1 1/2 inch, 150 lbs, RF, A105 C/S * 1 5 J 14 AWG 5/8 inch x 3/8 inch * 3 1 1/2 inch, 300 lbs, RF, 316 SS * 1 5 T32 (HART® Transmitter) 6 C 6 M 20 AWG 1 1/2 inch, 300 lbs, RF, A105 C/S * 1 5 T53 (Fieldbus Foundation / PROFIBUS PA Transmitter) 3/4 inch x 1/2 inch * 3 D 9 7 1 Ø 0.35 mm 8 1 inch x 1/2 inch * 3 E 2 inch, 150 lbs, RF, 316 SS * 1 5 2 Ø 0.50 mm 9 1 1/4 inch x 3/4 inch * 3 F 3 Ø 0.20 mm 5 1 3/4 inch x 1 inch * 4 G 2 inch, 300 lbs, RF, 316 SS * 1 5 4 Ø 1.00 mm F 26 mm x 18 mm * 5 H 2 inch, 300 lbs, RF, A105 C/S * 1 5 5 Ø 3.00 mm G 24 mm x 19 mm * I 3 inch, 150 lbs, RF, 316 SS * 1 5 D 16 mm x 12 mm * 6 J 3 inch, 150 lbs, RF, A105 C/S * 1 5 K 3 inch, 300 lbs, RF, 316 SS * B AMK per DIN 43733 (metal protection tube with ceramic inner tube, head form A) AK per DIN 43733 (ceramic protection tube, head form A) X 7 AKK per DIN 43733 (ceramic protection tube with ceramic inner tube, head form A) BK per DIN 43733 (ceramic protection tube, head form B) Metric 9 1000 S (Stainless steel) 7 KN4-A (Aluminum) ASZ-H (Aluminum) with set screws Nipple A Nipple-Union P Threaded pipe sleeve Without S Stainless steel 316 (1.4401) E Carbon steel Z Without 15 mm x 11 mm * 7 K 10 mm x 7 mm * 6 A 24 mm x 18 mm * C 15 mm x 10 mm * 9 E 10 mm x 6 mm * 9 B 22 mm x 18 mm * 1 0 8 Inner tube material Alumina Ceramic (99.7 % purity) C610 Ceramic (approx. 60 % purity) J C799 Ceramic (99.7 % purity) Standard M Mullite (approx. 60 % purity) 2 With air purge Z Without 3 With pressure test connection 4 With ceramic seal Assembly option 13 With ceramic seal and pressure test connection Outer tube material BS (Aluminum) with set screws A Alumina Ceramic (99.7 % purity) C BSZ (Aluminum) with set screws I C610 Ceramic (approx. 60 % purity) X BSZ-H (Aluminum) with set screws Cable entry I I W Without 12 6 A 5 10 Metallic support tube Neck material 1 1000 F (Aluminum) Without / prepared for transmitter E Z 8 T91.10 (Analogue Transmitter, DIN form B) Neck extension B Imperial V M B Mullite (approx. 60 % purity) Metal Ceramic C Hexaloy K Silicon Carbide RSiC Inner tube diameter (S e e N ot e s * ) 1 3/8 inch x 1/4 inch * 1 1 2 11/16 inch x 7/16 inch * 1 1 3 3/4 inch x 9/16 inch * D 16 mm x 12 mm * 1 2 I 15 mm x 11 mm * 1 2 K 10 mm x 7 mm * C 15 mm x 10 mm * 1 3 E 10 mm x 6 mm * 1 3 Z 14 16 11 2 inch, 150 lbs, RF, A105 C/S * 1 5 L 3 inch, 300 lbs, RF, A105 C/S * 1 5 M 4 inch, 150 lbs, RF, 316 SS * 1 5 N 4 inch, 150 lbs, RF, A105 C/S * 1 5 O 4 inch, 300 lbs, RF, 316 SS * 1 5 P 4 inch, 300 lbs, RF, A105 C/S * 1 5 1 G 1/2, carbon steel * 1 6 2 G 3/4, carbon steel * 1 6 3 G 1, carbon steel * 1 6 4 G 1 1/4, carbon steel * 1 6 5 Dimensions adapted to thermowell, malleable cast iron * 1 7 6 With mating flange, dimensions adapted to thermowell, malleable cast iron * 1 7 Z Without Process connection design 50 mm 75 mm H 100 mm I 125 mm J 150 mm 22 23 24 25 26 Z Without ZZZZ 11 Use only with codes A or M for Inner tube material (Field 12) 12 Use only with code I for Inner tube material (Field 12) 13 Use only with code J for Inner tube material (Field 12) 14 Use only with code 6 for Process connection design (Field 14) 15 Use only with codes 7, 8 or 9 for Process connection design (Field 14) 16 Use only with code 4 for Process connection design (Field 14) 17 Use only with code 5 for Process connection design (Field 14) ZZZ Without Steel (1.4762) 9 Flange (cemented) 8 ISA standard to ANSI MC96.1-1982 Steel (1.4841) 4 Threaded bushing (adjustable) 9 ISA special to ANSI MC96.1-1982 F 3/4 NPT 5 Stop flange DIN 43734 (adjustable) 2 Class 2 per DIN EN 60584 E Straight, fixed with two set screws Z Without 1 Class 1 per DIN EN 60584 Z Without 3 Class 3 per DIN EN 60584 Notes Use only with codes D, E, F or G for Outer tube material (Field 10) 350 mm F Without 10 300 mm G Additional Text Use only with code J for Outer tube material (Field 10) 350 Classification tolerance T Z 9 300 Flange (partial penetration welded, 6 mm fillet) Additional order details Use only with codes D, E, F, G or J for Outer tube material (Field 10) 200 mm 8 Without 8 200 Carbon steel (1.0305), enamelled Quality certificates Use only with codes D, E, F, G or I for Outer tube material (Field 10) 150 mm E 1 Z 7 80 mm Single Certificates Use only with code I for Outer tube material (Field 10) 150 1 Without 6 080 Flange (full penetration welded) 2000 mm ZZZZZ Use only with codes H or K for Outer tube material (Field 10) 7.5 inch (Air Purge only) 7 1400 mm 02000 5 075 Carbon steel (1.0305) 01400 Without Type E (NiCr-CuNi) / 0...+870 °C D 1000 mm Use only with code K for Outer tube material (Field 10) 7 Without 710 mm 01000 4 4.2 inch Dual 500 mm 00710 Please specify (e.g. 84 mm = 0084) (e.g. 9.5 inch = 0950) 1.0 inch 2 355 mm 00500 Use only with code C for Outer tube material (Field 10) 042 Double threaded hex bushing 26 00355 3 010 6 25 Please specify (e.g. 844 mm = 00844) (e.g. 9.5 inch = 00950) Use only with code B for Outer tube material (Field 10) Type N (NiCrSi-NiSi) / 0...+1260 °C Number of sensors ***** 2 5 23 A-Dimension (A) Use only with codes A, I or M for Outer tube material (Field 10) X-Dimension (X) **** 22 24 1 Type J (Fe-CuNi) / 0...+760 °C M20 x 1.5 KN4-A F G Type K (NiCr-Ni) / 0...+1260 °C T 1000F 1000S 6.0 inch 3 Z BSZ-H E 1 Imperial Grid 1” x 1” BSZ 5.0 inch ZZZZZ C530 Ceramic (approx. 73 - 75 % purity) BS D B C799 Ceramic (99.7 % purity) ASZ-H 4.0 inch ***** J 1/2 NPT 3.0 inch Type B (Pt/30%Rh-Pt/6%Rh) +870...1700 °C (ANSI), +600...+1700 °C (DIN) H S B C S 3/4 NPT Head instrument connection 2.0 inch Type S (Pt-10%Rh/Pt) 0...+1480 °C (ANSI), 0...+1600 °C (DIN) F 18 A R Connection Heads ASZ 21 H-Dimension (H) Type R (Pt-13%Rh/Pt) 0...+1480 °C (ANSI), 0...+1600 °C (DIN) 1/2 NPT 17 21 Element 12 Without 20 15 S AS 20 Wire gauge of sensor T12 (Programmable Digital Transmitter) Power and Utilities 5 19 3 ASZ (Aluminum) with set screws 4 Terminal block / Transmitter PTA ceramic protection tube (North American standard) 6 Z 19 26 AWG U Sulphur Recovery Plants 18 24 AWG AS (Aluminum) with set screws Smelting Plants 17 P T Semi-Conductor Industries 16 O Incinerators Reactors 15 3/4 NPT, stainless steel * 1 4 Connection head 5 Furnaces, kilns, ovens and boilers 14 8 Unit of measure I 13 11/16 inch x 7/16 inch * 1 BMK per DIN 43733 (metal protection tube with ceramic inner tube, head form B) U TC80 series assemblies are suitable for measuring the radiant temperatures in most industrial and commercial high temperature applications including: 12 2 T U 11 Ceramic terminal block BM per DIN 43733 (metal protection tube, head form B) X 10 2 S H purging, pressure seals, and rugged outer protection tubes. 9 1/2 NPT, stainless steel * 1 4 AM per DIN 43733 (metal protection tube, head form A) A wide variety of designs are available that include connection to 8 7 P O 7 3/8 inch x 1/4 inch * 1 there is contact with noble metal thermocouple sensors (Types R, S, with standard thermocouple sensors or as outer protection tubes. 6 1 PTA metal/ceramic protection tube (North American standard) and corrosion resistant metals can be used when there is contact 5 Crastin terminal block V Q 4 1 High purity and high temperature ceramics must be used when and B having platinum and platinum/rhodium elements). Oxidation 3 TC80-XXXXXXXXX-XXXX-XX-XXXXXXXXXXXXXXXXXXXXXX-XX Thermocouple assembly description Y and high temperature ceramics as well as oxidation and corrosion process flanges, threaded fittings and direct mounting into a furnace 2 Code ~2" (~50 mm) resistant metals. 1 Note: Some configurations are unavailable. Your WIKA sales person will notify you if you have made an incorrect selection Imperial TC80 High Temperature Thermocouple Assembly Create your product part number by selecting the appropriate assembly items from each of the categories below. Enter the item code into the applicable box to generate the part number. Metric Part of Your Business U-Dimension (U) Please specify (e.g. 84 mm = 00084) (e.g. 9.5 inch = 00950) Without N-Dimension (N) WIKA worldwide North America Europe Canada WIKA Instruments Canada Ltd. Edmonton, Alberta Tel.: (+1) 780 463 7035 Fax: (+1) 780 462 0017 E-mail: info@wika.ca www.wika.ca Austria WIKA Meßgerätevertrieb Ursula Wiegand GmbH & Co. KG Wien Tel.: (+43) 1-8 69 16 31 Fax: (+43) 1-8 69 16 34 E-mail: info@wika.at www.wika.at Mexico Instrumentos WIKA México, S.A. de C.V. Álvaro Obregón Tel.: (+52) 55 5020 5300 Fax: (+52) 55 5020 5301 E-mail: ventas@wika.com www.wika.com.mx Benelux WIKA Benelux Echt Tel.: (+31) 475 53 55 00 Fax: (+31) 475 53 54 46 E-mail: info@wika.nl www.wika.nl USA WIKA Instrument Corporation Lawrenceville, Georgia Tel.: (+1) 770 513 8200 Fax: (+1) 770 338 5118 E-mail: info@wika.com www.wika.com Bulgaria WIKA Bulgaria EOOD Sofia Tel.: (+359) 2 82138-10 Fax: (+359) 2 82138-13 E-mail: t.antonov@wika.bg www.wika.bg USA WIKA Instrument Corporation Houston Facility Deer Park, Texas Tel.: (+1) 713 475 0022 Fax: (+1) 713 475 0011 E-mail: info@wikahouston.com www.wika.com Finland WIKA Finland Oy Helsinki Tel.: (+358) 9-682 49 20 Fax: (+358) 9-682 49 270 E-mail: info@wika.fi www.wika.fi South America Argentina WIKA Argentina S.A. Buenos Aires Tel.: (+54) 11 4730-1800 Fax: (+54) 11 4761-0050 E-mail: info@wika.com.ar www.wika.com.ar Brazil WIKA DO BRASIL Iperó - SP Tel.: (+55) 15 3459 9700 Fax: (+55) 15 3266 1650 E-mail: marketing@wika.com.br www.wika.com.br France WIKA Instruments s.a.r.l. Eragny-sur-Oise Tel.: (+33) 1/34 30 84 84 Fax: (+33) 1/34 30 84 94 E-mail: info@wika.fr www.wika.fr Germany - Head Office WIKA Alexander Wiegand GmbH & Co. KG Klingenberg Tel.: (+49) 9372 132-0 Fax: (+49) 9372 132-406 E-mail: info@wika.de www.wika.de Italy WIKA Italiana SRL Arese (Milano) Tel.: (+39) 02-93 86 11 Fax: (+39) 02-93 86 174 E-mail: info@wika.it www.wika.it Asia Africa/Middle East Poland Kujawska Fabryka Manometrow Wloclawek Tel.: (+48) 54230 11 00 Fax: (+48) 54230 11 01 E-mail: info@manometry.com.pl www.manometry.com.pl China WIKA International Trading (Shanghai) Co., Ltd. Shanghai Tel.: (+86) 21 53 85 25 72 Fax: (+86) 21 53 85 25 75 E-mail: wikash@online.sh.cn Egypt WIKA Alexander Wiegand GmbH & Co. KG Nasr City, Cairo Tel.: (+20) 2-227 33 140 Fax: (+20) 2-227 33 140 E-mail: Ahmed.Azab@wika.de Romania WIKA Instruments Romania S.R.L. Bucuresti Tel.: (+40) 21-456 31 38 Fax: (+40) 21-456 31 37 E-mail: m.anghel@wika.ro www.wika.ro India WIKA Instruments India Pvt. Ltd. Wagholi, Pune Tel.: (+91) 20-66293200 Fax: (+91) 20-66293325 E-mail: sales@wika.co.in www.wika.co.in Russia ZAO “WIKA MERA” Moskau Tel.: (+7) 495-648 01 80 Fax: (+7) 495-648 01 81 E-mail: info@wika.ru www.wika.ru Japan WIKA Japan K.K. Minato-ku, Tokyo Tel.: (+81) 3-5439-6673 Fax: (+81) 3-5439-6674 E-mail: t-shimane@wika.co.jp Iran WIKA Instrumentation Pars Kish Ltd. Tehran Tel.: (+98) 21- 8852 6730 3 Fax: (+98) 21- 8875 7413 E-mail: info@wika.ir www.wika.ir Serbia WIKA Merna Tehnika d.o.o. Beograd Tel.: (+381) 11 2763 722 Fax: (+381) 11-753 674 E-mail: info@wika.co.yu www.wika.co.yu Spain Instrumentos WIKA, S.A. Sabadell (Barcelona) Tel.: (+34) 902 902 577 Fax: (+34) 933 938 666 E-mail: info@wika.es www.wika.es Switzerland MANOMETER AG Hitzkirch Tel.: (+41) 41 919 72 72 Fax: (+41) 41 919 72 73 E-mail: info@manometer.ch www.manometer.ch Ukraine WIKA Pribor GmbH Donetsk Tel.: (+38) 062 345-34-16 Fax: (+38) 062 345-34-17 E-mail: info@wika.donetsk.ua www.wika.donetsk.ua United Kingdom WIKA Instruments Limited Merstham, Redhill Tel.: (+44) (0) 1737 644 008 Fax: (+44) (0) 1737 644 403 E-mail: info@wika.co.uk www.wika.co.uk Kazakhstan TOO WIKA Kasachstan Almaty Tel.: (+7) 3272 33 08 48 Fax: (+7) 3272 78 99 05 E-mail: info@wika.kz www.wika.kz Korea WIKA Korea Ltd. Seoul Tel.: (+82) 2-869 05 05 Fax: (+82) 2-869 05 25 E-mail: info@wika.co.kr www.wika.co.kr Malaysia WIKA Instrumentation (M) Sdn Bhd Puchong, Selangor Tel.: (+03) 80631080 Fax: (+03) 80631070 E-mail: info@wika.com.my www.wika.com.my Singapore WIKA Instrumentation PTE. LTD. Singapore Tel.: (+65) 6844 55 06 Fax: (+65) 6844 55 07 E-mail: info@wika.com.sg www.wika.com.sg Taiwan WIKA Instrumentation Taiwan Ltd. Pinjen, Taoyuan Tel.: (+886) 3 420 6052 Fax: (+886) 3 490 0080 E-mail: info@wika.com.tw www.wika.com.tw South Africa WIKA Instruments (Pty.) Ltd. Gardenview, Johannesburg Tel.: (+27) 11-621 00 00 Fax: (+27) 11-621 00 59 E-mail: sales@wika.co.za www.wika.co.za United Arab Emirates WIKA Middle East FZE Jebel Ali, Dubai Tel.: (+971) 4-883 90 90 Fax: (+971) 4-883 91 98 E-mail: wikame@emirates.net.ae Australia Australia WIKA Australia Pty. Ltd. Rydalmere NSW Tel.: (+61) 2 8845 5222 Fax: (+61) 2 9684 4767 E-mail: sales@wika.com.au www.wika.com.au
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-702 Producer : Adobe PDF Library 8.0 Trapped : Unknown Keywords : WIKA; TC80; high temperature thermocouple assembly; electrical; temperature; measurement; cement plants; chemcial and petrochemical industries, energy and power plant technology; furnacnes; kilns; ovens; boilers; glass; porcelain; ceramics; incinerators; power; utilities; reactors; semo-conductor; smelting plants; sulphur recovery plants; Create Date : 2008:01:10 09:36:55-07:00 Modify Date : 2010:10:27 13:33:21-04:00 Metadata Date : 2010:10:27 13:33:21-04:00 Creator Tool : Adobe InDesign CS3 (5.0.1) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 10250 bytes, use -b option to extract) Instance ID : uuid:f3cec048-150f-4902-b871-908309f60358 Rendition Class : proof:pdf Document ID : adobe:docid:indd:fdfe4574-920c-11dc-ba5c-e2aeb24424f5 Derived From Instance ID : fdfe4573-920c-11dc-ba5c-e2aeb24424f5 Derived From Document ID : adobe:docid:indd:7d0a6aed-8946-11dc-9403-8402557e1dc0 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 72.00, 72.00, 299.89, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 300.00, 72.00, 72.00, 299.89, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:BB2A0E1A6293DC118813D6679F0F946E, uuid:a6c238f2-9921-2f46-85d6-7290ce4c1090, uuid:8d083800-690e-394a-85aa-8e3aca3ae869, uuid:48B15DCC4389DC11A815D0057D3C5B44, uuid:df1a179c-694b-8546-aeb5-f9a8f5f540ac, uuid:3b4e171e-dc11-11d9-a8ef-0003937d73da, uuid:3b4e171e-dc11-11d9-a8ef-0003937d73da Manifest Reference Document ID : uuid:3EA40837A384DC11BC5CA71A87FF7E70, uuid:42561AC47E84DC11BC5CA71A87FF7E70, uuid:7E7028443F89DC11A815D0057D3C5B44, uuid:E6F57BAF883BDC11A8F8FB6EBB0F7380, uuid:adfc8bc0-c0c8-11d9-8674-0003937d73da, uuid:adfc8bc0-c0c8-11d9-8674-0003937d73da Format : application/pdf Title : TC80 High Temperature Thermocouple Assembly Creator : WIKA Instrument Corporation Description : TC80 High Temperature Thermocouple Assembly Rights : (C) WIKA Instrument Corporation Subject : WIKA, TC80, high temperature thermocouple assembly, electrical, temperature, measurement, cement plants, chemcial and petrochemical industries, energy and power plant technology, furnacnes, kilns, ovens, boilers, glass, porcelain, ceramics, incinerators, power, utilities, reactors, semo-conductor, smelting plants, sulphur recovery plants Marked : True Has XFA : No Page Count : 6 Author : WIKA Instrument CorporationEXIF Metadata provided by EXIF.tools