Basler Ace USB 3.0 User’s Manual
User Manual:
Open the PDF directly: View PDF
Page Count: 375 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contacting Basler Support Worldwide
- Table of Contents
- 1 Specifications, Requirements, and Precautions
- 2 Installation
- 3 Tools for Changing Camera Parameters
- 4 Camera Functional Description
- 5 Physical Interface
- 5.1 General Description of the Camera Connections
- 5.2 Camera Connector Pin Numbering and Assignments
- 5.3 Camera Connector Types
- 5.4 LED Indicator
- 5.5 Camera Cabling Requirements
- 5.6 Camera Power
- 5.7 Opto-isolated Input (Pin 2/Line 1)
- 5.8 Opto-isolated Output (Pin 4/Line 2)
- 5.9 Direct-coupled General Purpose I/O (GPIO; Pin 1/Line 3, Pin 3/Line 4)
- 5.10 Temporal Performance of I/O Lines
- 5.11 Configuring Input Lines and Signals
- 5.12 Configuring Output Lines and Signals
- 5.13 Significance of I/O Line Status
- 5.14 Checking I/O Line Status
- 6 Image Acquisition Control
- 6.1 Overview
- 6.2 Acquisition Start and Stop Commands and the Acquisition Mode
- 6.3 The Frame Burst Start Trigger
- 6.4 The Frame Start Trigger
- 6.5 Setting the Exposure Time
- 6.6 Electronic Shutter Operation
- 6.7 Overlapping Image Acquisitions
- 6.8 Acquisition Monitoring Tools
- 6.9 Acquisition Timing Chart
- 6.10 Maximum Allowed Frame Rate
- 6.11 Use Case Descriptions and Diagrams
- 7 Features
- 7.1 Feature Availability Charts
- 7.2 Gain
- 7.3 Black Level
- 7.4 Remove Parameter Limits
- 7.5 Digital Shift
- 7.6 Image Region of Interest (ROI)
- 7.7 Sequencer
- 7.8 Binning
- 7.9 Decimation
- 7.10 Scaling
- 7.11 Mirror Image
- 7.12 Luminance Lookup Table
- 7.13 Gamma Correction
- 7.14 Color Creation and Enhancement
- 7.15 Auto Functions
- 7.16 Timestamp Value
- 7.17 Event Notification
- 7.18 Test Images
- 7.19 Device Information Parameters
- 7.20 User Defined Values
- 7.21 User Sets
- 7.22 Line Pitch
- 7.23 Chunk Features
- 8 Troubleshooting and Support
- Revision History
- Index