BELL_2014_catalogue_Aw_inner_Bell_2009_catalogue_aw Bell System Full Product Catalogue

User Manual: Bell System Full Product Catalogue

Open the PDF directly: View PDF .
Page Count: 92

Download
Open PDF In Browser	View PDF

bellissimo door entry colour video telephone

bellfree ‘handsfree’ colour video apartment station

bellissimo audio telephone

801 door entry telephone

bellini panel range

door entry panels – SPA range (standard panel alluminium)

door entry panels – VRP & LCP range (vandal resistant & laser cut)

bellini systems

900 series audio door entry systems

VRK series vandal resistant door entry systems

belltone door entry telephone interface

DDA door entry systems (DDA - disability discrimination act)

bellissimo colour video door entry systems

digibell digital door entry systems

BSX & DAX isolating exchange door entry systems

combined door entry and proximity systems

bellcode coded access systems

cs109 combined door entry and coded access (secure)

cs106 combined door entry and coded access (standalone)

door entry components and accessories

bellcall emergency call system

The contemporary and stylistic bellissimo video telephone has a slim
and curvaceous profile. It is supplied in white to complement most
modern wall furnishings and is now the preferred choice of many of
the UK new build property developers.

The bellissimo model BS video telephone is manufactured in white
high-impact ABS plastic for high durability and has a 3.5” LCD colour
display providing a high definition quality picture.

With a fresh modern look the video telephone has soft silicone backlit
buttons and a ringer volume control. Privacy of speech is included
whereby only the called resident can converse with the caller.

These telephones can operate over long distances with standard CAT5
cables. They are wall mounted without the need for additional brackets
and connections to the telephone use removable connecting blocks.

Model BS

Privacy of speech is included

The telephone has three ‘soft-touch’ silicone

Private

whereby only the called resident

rubber push buttons that can be backlit and

To avoid disturbance the resident can push this button to mute

can converse with the caller.

each has a clear and precise function symbol;

the ringing tone and the button will illuminate in RED. The

When called the telephone

telephone will revert to normal operating mode after a selectable fixed

activates the display and enables

period (adjustable between 1 minute and 10 hours, or indefinitely).

speech

for

fixed

period

(adjustable 15 – 180 seconds).

View

Door

This button will flash in AMBER whilst the telephone is

A momentary press of this button will provide a timed

ringing. The telephone will normally display the picture from the

output to the lock release (adjustable at the panel controller, typically

panel camera unless the auto-picture option has been disabled and

3 seconds). The button will flash in GREEN to indicate that the door

in this instance the resident must press the flashing amber button or

may be released and will be lit permanently in GREEN if the door has

lift the handset for the display to appear.

been left in an open state (door contact required).

The model BS-DESK is available for table top mounting. The BS-DESK
is factory fitted on a sloped pedestal for ease of use and has a captive
cable with plug-in connector for the supplied telephone wall

Model BS-A
Audio phone
for extension

Telephone Dimensions:
H = 225mm, W = 180mm, D = 60mm

mounting socket.

The model BS video telephone can be connected to further model BS
video telephones for extension purposes. Alternatively, a model BS-A
audio telephones can be considered. In addition, a flashing beacon
(model BS-FB) and an extension sounder (model BS-RT) can also be
used as extensions.
Model BS-DESK
5

The bellfree colour video apartment station is a welcome addition to
our range of door entry systems. It operates with true ‘hands-free’
speech with outstanding clarity. Its sophisticated and universal appeal
makes it the ideal choice for new build apartment blocks and
refurbishments.

The bellfree system is compatible with the Bellissimo video telephone
(model BS) and the Bellissimo audio telephone (model BS-A). This
makes it a perfect solution for mixed housing developments and also
allows for added options for extension telephones.

The model BF apartment station is supplied for both surface and flush
fitting without additional brackets or connectors.

Sensitive Touch Pad for user operation

Surface or Flush fitting without additional
brackets or connectors

Model BF

The bellfree apartment station has a contemporary and slim profile to

• White satin-gloss finish to complement most wall furnishings.

Each standard BF packaged system provides all necessary components

complement modern apartments. It has true ‘hands-free’ speech

• Discreet contrast and call-tone volume controls

to install a complete video door entry system.

operation utilising a semi-custom Digital Processor with ‘Adaptive

• Supplied for both surface and flush fitting without the need for

Acoustic Echo & Ambient Noise Cancellation’.

additional boxes, brackets or connectors.
• It requires standard CAT5 cable and has removable connectors for

Some of the notable features of the bellfree apartment station
and system are;
• High quality colour video with a 3.5” TFT screen.
• True ‘hands-free’ speech.
• A sensitive Touch Pad for user operation with multi-coloured backlighting and universal graphic symbols.
8

ease of installation.
• Compatible with bellissimo video and audio telephones for
installation in mixed housing developments.
• Available with a range of vandal resistant stainless steel door

A standard multi-way BF system comprises of;
• model BF bellfree apartment stations
• model BSC4 telephone controller (one for every 4 units)
• model BFP stainless steel front door panel
• relevant BFD panel controller
• model CAMBS-C colour CCD day/night camera with infra-red lamps

panels with options for digital panels, DDA compliant panels,

• speech unit

proximity and coded access.

• model PS4 12v DC power supplies

Model BF4/VR
4 way system

Digital option

Proximity option

• model 203 surface lock release

Model BSC4 Controller

BFD72

• full wiring and installation manual

The model BSC4 interfaces up to 4 bellfree apartment stations on to

BFD-DIG - digital panel controller

- nine to seventy two button panel controller

the CAT5 distribution and provides line isolation. Each bellfree unit
Ordering information

has its own designated port with removable terminal blocks.

prior to installation to ascertain full cable specification and layout.

Order a model BF1 for a complete single station system. For multistation systems order a model BFn, where n is the number of stations.

Door Panel Controllers

Append /S for surface panels.

Each door panel on a system is connected to a door controller for

e.g. a model BF6 is a complete 6 station flush system

connection to the CAT5 distribution network and provides all inputs

a model BF6/S is a complete 6 station surface system

Please request a copy of the installation and operation manual

and outputs to the door and panel.

For tradesmen facility, add the code TRBF (a model TS2000-BST time

BFD1

- one button panel controller

clock is included).

BFD8

- two to eight panel controller
9

The bellissimo audio telephone complements the bellissimo video
range. It incorporates the extra functions and features of the video
system which is often requested by specifiers for audio systems.

The contemporary design has an extremely slim profile giving the
telephone a flush-effect when mounted on the wall. The telephone is
manufactured from high impact white ABS plastic with two ‘softtouch’ silicone rubber push-buttons that are selectively backlit and
clearly marked with symbols.

Two models are currently available;
model BS-A for audio extensions on the bellissimo video systems or
for connection to the bellcall digital systems.

model BS-LX available for connection to any of our standard 12v DC
door entry systems and can be considered as a direct replacement for
the model 500LX telephone previously supplied.

Model BS-LX

The slim-line white bellissimo audio telephones are manufactured
from high impact ABS plastic and have a flush effect profile when
mounted on the wall.

The white handset cord is coiled and has a plug-in connector at the
telephone base. No wires or parts are connected to the removable
cover so that that when it is removed there is no risk of damage.

Model BS-A

Standard features on these telephones are ‘privacy

(adjustable between 1 minute and 10 hours, or indefinitely).

Two models are currently available;

of speech’, ‘ringing tone muting’ with timing

The button is permanently lit in RED when the telephone ringing tone

Model BS-A

options, ‘adjustable ring volume’ and ‘door open’

is muted

This model is used for audio extensions on the bellissimo video

indication. Two ‘soft-touch’ silicone rubber push-

systems and also for connection to the digital systems when the extra

buttons are provided that are selectively backlit

Door

and clearly marked with symbols;

A momentary press of this button will release the lock

Private

function afforded by the telephone is specified.

mechanism. The button will be permanently lit in GREEN if the door

Model BS-LX

has been left in an open state (door contact required).

A full function telephone designed for connection to our standard 12v

To avoid disturbance from nuisance calls the resident may

DC door entry systems. This telephone is commonly used on the BSX

push this button to mute the ringing tone. The telephone

and DAX full line isolation systems and is a direct replacement for the

will revert to normal operating mode after a selectable fixed period

Telephone Dimensions: H = 235mm, W = 105mm, D = 25mm

model 500LX telephone previously supplied.
13

The model 801 is Bell Systems’ original door entry telephone. It has
been re-styled a number of times over the years and still maintains
its classic design. The 801 telephone continues to be the most
popular in the UK market owing to its exceptional reliability and
economical price.

The model 801 telephone operates from both12v AC or 12v DC and is
included in the standard model 900 and VRK audio door entry
systems as well as the CS and CSP series of combined keypad and
proximity door entry systems.

Model 801

The telephone is manufactured in white high-impact ABS plastic for

The model 801 telephone operates from both12v AC or 12v DC and is

Available models;

high durability and complements most wall furnishings. It incorporates

included in the standard model 900 and VRK audio door entry

• Model 801 (standard)

a 'lock release' push-button discreetly positioned on the base, and

systems. It is also included in the CS series of combined keypad and

• Model 801PS (with mute + privacy)

under the handset, to prevent inadvertent use. With its wide handset

proximity door entry systems.

• Model 801-DESK (desk mount)

the model 801 is especially recommended for the elderly.
Dimensions: H = 212mm, W = 85mm, D = 55mm
The Electronic Ringing Tone has a useful safety feature whereby the
tone is reduced when the handset is ‘off the hook’.

The telephone has two levels for the ringing tone. A HI or LO position
can be set within the telephone on installation or at future date.
16

Model 801

801S - Mute Switch.

this feature, the speech clarity of the system will be impaired if

A switch is included on the side of the telephone to allow the user to

telephones are left 'off the hook’; this is more likely on a larger system.

mute the call-tone and prevent disturbances from nuisance calls.
The model 801-DESK is available for
801P - Privacy of Speech.

table top mounting. The model

Any conversation between the visitor and the resident on the called

801-DESK is factory fitted on a

telephone is totally private. The telephone will remain 'live' for a set

sloped pedestal for ease of use and

period after being called and will then automatically close down the

has a captive cable with plug-in

speech connection. The 'privacy of speech' feature is highly

connector

recommended on systems that have in excess of 10 stations. Without

telephone wall mounting socket.

for

the

supplied
Model 801-DESK

Bell System is pleased to announce the launch of the new bellini
range of door entry surface mounting panels. These new stylish
panels can be considered as an elegant alternative to the traditional
SPA series of panels.

The bellini panels are designed for installations at low-rise
apartments, maisonettes and conversions making them an ideal
choice for the private building sector and property developers. The
range currently includes audio, audio combined with a keypad and
video panels.

All panels are manufactured from anodised aluminium in a
contemporary design and have black plastic trims with contrasting
chromed pushbuttons and speech grill. The front panels are hinged
from the back box for ease of installation and the hinges can easily be
changed from one side to the other to assist in tight locations

Model BLP2
Audio Panel

Model BLP106-3
Combined Panel

Model BLVP8
Video Panel

The front panels are hinged from the back box and the hinges can
easily be changed from one side to the other to assist their
installation in tight locations.

Optional nameplate illumination is available with the model BLP-LAMP

The bellini panels can be purchased independently or as part of a

lighting module.

packaged system. Three styles of panel are immediately available;

Panels do not included the speech unit and a model 61 speech unit

• Audio panel; 1, 2, 3, 4, 6, 8, 10 and 12 buttons

The bellini video panels include a protected CCD colour camera for
connection to the bellissimo video system.

should be ordered with each panel.
The bellini audio combined panels include an integral model C106

• Audio and video panel; 1, 2, 3, 4, 6 and 8 buttons

keypad for a residents’ coded access facility.
• Audio panel with integral keypad; 1, 2, 3, 4 and 6 buttons
20

Innovative hinged assembly
for ease of wiring

Bellini Panel Dimensions (mm) panels up to 3 buttons are single pushbuttons, panels above are double pushbuttons.
AUDIO

VIDEO

KEYPAD

CODE

Height

Width

Depth

CODE

Height

Width

Depth

CODE

Height

Width

Depth

BLP1

185

100

BLVP1

260

100

BLP106-1

285

100

BLP2

210

100

BLVP2

285

100

BLP106-2

310

100

BLP3

235

100

BLVP3

310

100

BLP106-3

335

100

BLP4

210

100

BLVP4

285

100

BLP106-4

310

100

BLP6

235

100

BLVP6

310

100

BLP106-6

335

100

BLVP8

335

100

BLP8

260

100

BLP10

285

100

BLP12

310

100

35
21

The SPA panels are supplied in the model 900 series door entry
systems and are a popular choice due to their high durability,
resistance to corrosion and low cost.
These panels offer a contemporary and attractive style. The panels up
to 10 buttons are manufactured from 3 mm brushed anodised
aluminum with an integral grill that protects the speech unit and
complements the surface back box. The grill has fixings on the rear to
firmly secure the speech unit.
As standard, the panels are supplied with a low-profile surfacemounting box moulded in black to complement the push-buttons.
Alternatively, the panels can be supplied with a flush fitting zintec
back box and vandal resistant bolts.

Model SPA1

Model SPA4

Model SPA6

Panels 1 to 10 buttons

from the front for replacement or amendment of the name or number

Tradesman’s button. A nameplate is positioned adjacent to the push-

They are manufactured from 3 mm brushed anodised aluminium with

on the paper insert (included with each button).

buttons. Optional backlighting can be achieved by fitting festoon lamp
units to the back-box; specify model 37 holder and model 36 bulb.

an integral grill that protects the speech unit and complements the
surface back box. The grill has fixings on the rear to firmly secure a

Optional backlighting can be achieved by fitting a model SPA-LAMP

model 61 speech unit.

lamp unit to each push-button.

A single push-button with integral nameplate is provided for each

Panels above 10 buttons

box by means of vandal resistant bolts (model 38) requiring a special

station including an optional Tradesman’s button. This push-button

These panels are manufactured from 4mm brushed anodised

tool (model 39) for their removal. These bolts and one special tool are

has a versatile design whereby pressure from any part of the

aluminium and are available in even numbers and for flush-fitting only.

supplied with each panel.

nameplate will initiate a call. The nameplate can easily be removed

A single push-button is provided for each station including an optional

The back box is manufactured from Zintec, a coated steel material
that prevents tarnishing and rusting. The panel is attached to the back

Model SPA12

SPA Door Entry Panel Dimensions SPA1 to SPA10 and SPA1F to SPA10F
Flush Panel (F)
Ordering information

Code

Order a model SPA n, where n is the number of push-buttons required

Panel (mm)

Surface Panel

Backbox (mm)

SPA1

170

159

190

102

(Please include an extra push-button should a Tradesmen/Services

SPA2

230

219

248

100

button be required).

SPA3

270

259

288

100

SPA4

270

259

288

100

different style panel and are

All panels up to 10 buttons require a model 61 speech unit.

SPA5

370

359

388

100

flush fitting only.

Panels above 10 buttons require a model 51 speech unit.

SPA6

370

359

388

100

Sizes on application.

SPA7

370

359

388

100

Panel dimensions are

SPA8

470

459

488

100

approximate and may change

SPA9

470

459

488

100

SPA10

470

459

488

100

e.g. a 9 button unit would be a model SPA9.

Sizes above 10 buttons use a

without notice.
25

In vulnerable areas the entrance panel may be subject to vandalism.
This is common with local authority and public housing. Although it
is impossible to withstand extreme acts of vandalism, our VRP panels
are designed to resist all but the most determined of vandals. The LCP
panel offers even greater protection than the VRP panels and will
resist most attacks of vandalism.

The VRP panels are manufactured in our factory from 2.5mm 316
marine grade stainless steel. A stainless steel vandal resistant pushbutton is provided for each station and optionally for Trades. For each
push-button a number or letter can be engraved on the panel for
permanent identification. Many options are available for these panels
including keypads, proximity readers and cameras.

Model VRP1

Model VRP4

The VRP panels are manufactured from 2.5 mm 316 marine grade*

For each push-button a number or letter can be engraved on the

stainless steel or optionally in solid brass. They are supplied for flush

panel for permanent identification. The engraving of flat numbers is

mounting with a zintec back-box or optionally for surface fitting

included in the price but any further engraving, e.g. building names

with a stainless steel cowling. The panel is fixed to its back-box

or instructions will incurr a modest surcharge.

Model VRP9-S

with tamper proof bolts (a special ¼” hex bit is supplied).
Although we generally supply panels to fit standard back boxes, they

A single stainless steel vandal resistant push-button (or brass button

can be manufactured to custom dimensions; prices for this can be

Custom layouts can include;

for brass panel) is provided for each station and optionally for Trades.

obtained on application.

These buttons are individually attached by means of a nut on the rear

Since there are many variations with vandal panels an illustrative and

of the panel.

dimensioned drawing is provided for approval prior to manufacture.

•
•
•
•
•

Custom engraving with numbers and text
Trades facility
Cut out for CCD camera
Cut out for Proximity readers with stud fixings
Keypads for access control

Model VRP5
with extra engraving

Model LCP7

Model VRP6-WIN

*Despite the fact that the highest quality of 316 marine grade

just 0.3 mm rejecting implements that could be used to force the

the price but any further engraving can be

stainless steel is used in the manufacture of our panels they can

panel from its box. The bezel is securely welded to the back-box

included for a modest surcharge.

still be prone to tarnishing in some coastal locations or in areas

providing an extremely strong fixing to the wall. The removable

of industrial pollution. If in doubt about the suitability of these

plate is fixed to the bezel and back box with countersunk A2

Ordering information

panels in your area please contact us for advice.

stainless steel security bolts requiring the use of a specialist tool for

Order a model VRP n or LCP n, where n is the

their removal (supplied).

number of push-buttons required.

LCP Laser Cut Panels

e.g. a 4 button unit would be a model VRP4.

The LCP panel offers even greater protection than the VRP panels and

Vandal resistant push-buttons are included which are individually

(Please include an extra push-button should a

will resist most attacks of vandalism. The front-plate consists of an

attached by means of a back nut on the rear of the panel. For each

Tradesmen/Services button be required.)

overlapping bezel and a removable plate cut by a laser from the same

push-button a number or letter can be engraved on the panel for

For surface panels add –S to the order code e.g. VRP4-S

sheet of 2.5 mm 316 marine grade stainless steel. This leaves a gap of

permanent identification. The engraving of flat numbers is included in

All panels require a model 61 speech unit.
29

The bellini systems are designed for installations in low-rise
apartments, maisonettes and conversions making them an ideal
choice for the private building sector and property developers. The
range currently includes audio systems, audio and keypad combined
systems and video systems.

The surface mounted panels are manufactured from anodised
aluminium with a contemporary design and profile. The panels have
curved black plastic trims which contrast with the distinctive chromed
pushbuttons and speech grill. The front panels are hinged from the
back box and the hinges can easily be changed from one side to the
other to assist their installation in tight locations.

These new stylish systems can be considered as an elegant alternative
to the traditional 900 series systems. An optional tradesmen facility is
available on all but the largest system size in each version.

Model BL2
2 way audio system

Model BL106-3
3 way combined system

bellini audio systems

bellini combined audio and coded access systems

available and the model 210 (fail-secure) or the model 206 (fail-safe)

The bellini audio systems include the new contemporary surface

The bellini combined systems include the new contemporary surface

lock release is recommended.

mounted bellini panels. Each audio system includes a bellini audio

mounted bellini panels. A complementary chromed model C106

panel, the popular model 801 white wall-mounting telephones, a

keypad with LED indicators is included for coded access functions. The

Panel sizes include 1, 2, and 3 with single buttons and, 4 and 6 with

model 61 speech unit and a power supply. A fail-secure lock output is

C106 keypad may be programmed with up to 10 unique access codes

double buttons to keep panel dimensions to a minimum.

available and the model 210 lock release is recommended.

and has many programmed functions including lock duration, lock

Optional nameplate illumination is available with the model BLP-LAMP

delay and timed restrictions.

lighting module.

Panel sizes include 1, 2, and 3 with single buttons and, 4, 6, 8, 10, and

12 with double buttons to keep panel dimensions to a minimum.

Each combined system includes a bellini panel with keypad, the popular

Optional nameplate illumination is available with the model BLP-LAMP

model 801 white wall-mounting telephones, a model 61 speech unit

lighting module.

and a power supply. A fail-secure and a fail-safe lock output are

Model BLV2
2 way video system

Bellini colour video systems

silicone backlit buttons, a model 61 speech unit, all necessary

The bellini colour video systems include the new contemporary

controllers and a power supply. A fail-secure and a fail-safe lock

surface mounted bellini panels.

output are available and the model 210 (fail-secure) or the model 206
(fail-safe) lock release is recommended.

A protected ‘day-night’ colour CCD camera with infra-red lamps is
mounted in the panel for connection to the video telephone giving a

Panel sizes include 1, 2, and 3 with single buttons and, 4, 6 and 8 with

great colour picture of the visitor during the day and automatically

double buttons to keep panel dimensions to a minimum.

reverting to black and white at night to ensure a clear picture.
Optional nameplate illumination is available with the model BLP-LAMP
Each video system includes a bellini panel with camera, the popular
bellissimo video telephones with a 3.5" colour TFT screen and soft

lighting module.

Ordering information
Audio systems;
Order a model BL n, where n is the number of stations required
e.g. a 4 station audio system is a model BL4
For tradesmen entry add the code TRBL
Combined Audio and keypad systems;
Order a model BL106-n, where n is the number of stations required
e.g. a 4 station combined system is a model BL106-4
For tradesmen entry add the code TRBL
Video systems;
Order a model BLV n, where n is the number of stations required
e.g. a 4 station video system is a model BLV4
For tradesmen entry add the code TRBLV
bellini systems do not include a lock release
33

The 900 Series audio door entry systems are recognised for their high
quality and competitive pricing and are widely accepted as the
industry standard.

Each system provides all of the components necessary to install a
complete audio door entry system; including a surface lock release as
standard. The packaging of these complete systems allows for ease of
specifying, tendering, distribution and installation.

These systems are available from a one way (model 901) up to any size.

Model 901
1 way system

Model 902
2 way system

Each 900 series system comprises of;

The SPA panels supplied in the 900 kits are a popular choice due to

With its wide handset the model 801 is especially recommended for

• model 801 telephone, one for each station

their high durability, resistance to corrosion and low cost. These

the elderly.

• model SPA front door panel

panels are designed with an attractive and contemporary style and are

• model 61 speech unit (model 51above 10 ways)

available surface or flush up to 10 ways. The larger panels are of a

It incorporates a 'lock release' push-button discreetly positioned on

• model 203 surface lock release

more classic style and are available flush fitting only.

the base, and under the handset, to prevent inadvertent use.

• model 212 12v AC PSU (model 225 above 10 stations)
• full wiring and installation instructions

The Electronic Ringing Tone has a useful safety feature wherein the
The model 801 telephone is included as standard in each system.
The telephone is manufactured in white high-impact ABS plastic that
imparts high durability and complements most wall furnishings.

tone is reduced when the handset is ‘off the hook’.

Model 904
4 way system

Model 906
6 way system

Ordering Information
Order a model 901 for a complete single station system.
For multi-way systems order a model 900 + n, where n is the number
of stations, e.g. a model 914 is a complete 14 station system.
(For systems above 20 stations please append the code P for inclusion
of privacy telephones)

For tradesmen entry facility, simply add TR900 to any given system,
e.g. a six station system with trades facility is a model 906 +TR900
(A model TS2000-BST time clock is included).

The VRK Vandal Resistant Door Entry Systems have been devised for
buildings that are prone to external vandalism.

The system can have a range of options including; surface mounting
panels, extra engraving and a tradesmen entry facility. These systems
are available from a one way (model VRK1) up to any size.

Model VRK1
1 way system

Model VRK3+LOGO
3 way system

Each VRK series system comprises of;

the panel). A vandal resistant button is provided for each flat and

The telephone is manufactured in white high-impact ABS plastic

• model 801 telephone, one for each station

optionally one for Tradesmen.

which imparts high durability and complements most wall

• model VRP front door panel

furnishings. It incorporates a 'lock release' push-button discreetly

• model 61 speech unit

Each panel is custom engraved to client's specifications using the

positioned on the base, and under the handset, to prevent

• model 203 surface lock release

Panel Designer software, which creates a dimensioned drawing of the

inadvertent use. With its wide handset the model 801 is especially

• model 212 12v AC PSU (model 225 above 10 stations)

panel for customer approval prior to manufacture. The engraving of

recommended for the elderly.

• full wiring and installation instructions

flat numbers is included in the price of each system. Further engraving
(e.g. Block names) can be included for a modest surcharge.

The model VRP panels are manufactured from 2.5 mm 316 marine

The Electronic Ringing Tone has a useful safety feature wherein the
tone is reduced when the handset is ‘off the hook’.

grade* stainless steel. All panels are flush mounted and fixed to the

The model 801 telephones are included as standard for systems up to

back-box by tamper proof bolts (a special key is required to remove

20 stations and the model 801P with privacy function for larger systems.

Model VRK4 with extra engraving
+ Model TRVRK
4 way system with trade facility

Model VRK8-S
+ Model TRVRK
8 way surface system with trade facility

Ordering Information

*Despite the fact that the highest quality of 316 marine grade

Order a model VRK1 for a complete single station system.

stainless steel is used in the manufacture of our panels they can

For multi-way systems order a model VRK n, where n is the number

still be prone to tarnishing in some coastal locations or in areas

of stations

of industrial pollution. If in doubt about the suitability of these

e.g. a model VRK14 is a complete 14 station system.

panels in your area please contact us for advice.

For surface systems add –S to the order code e.g. VRK14-S

For tradesmen entry facility, simply add TRVRK to any given system
e.g. a six station system with trades facility is a model VRK6 + TRVRK
(A model TS2000-BST time clock is included).

The BT1 Telephone interface offers the convenience of operating

Operation

a door entry system from an existing BT style telephone without

The BT1 interface appears transparent to the phone line, even if the

interfering with its normal usage. Most domestic tone-dialling

BT1 is not powered. When a call is made from the entrance panel the

telephones are compatible with the BT1 including cordless DECT

telephone will ring for a maximum of 30 seconds. When the

telephones which are of great benefit to those people with

telephone is picked up the resident can converse with the visitor and

limited mobility.

operate the lock release by pressing ‘1’ on the telephone to allow
access. Should an external telephone call be received during this

The interface may also be connected onto many telephone

operation the resident has the ability to switch between both calls.

switchboards (PABX) via a dedicated trunk line input, but not an
extension connection.

BT1 Interface Unit
The interface is housed in a discreet ABS plastic enclosure which is

In addition to conversing with a caller at the front door panel the

designed for wall mounting in any indoor location, preferably next to

resident may allow them access by operating the lock release directly

the telephone line and a power point.

from their telephone.
Dimensions: H = 230mm, W = 190mm, D = 45mm

For connecting a one button
door entry panel to own home
telephone including cordless
DECT phones

Model BL1

Model BT901 belltone entry system
For a standard domestic application we offer a complete system that
includes all the necessary parts to complete an installation.
• model BT1 interface unit
• model SPA1 one button surface panel
• model 61 speech unit
• model 340C 12v DC power supply
• model 203 surface lock release

Model BT901
complete BT system
with SPA panel

Model BTBL1
complete BT system
with bellini panel

Model BTVRK1
complete BT system
with VRP panel

Model BTDDA1
complete BT system
with DDA panel

Model BTBL1 Belltone entry system

Model BTVRK1 belltone entry system

Model BTDDA1 belltone entry system

As an alternative for a domestic application we offer a complete bellini

For external areas that may be prone to vandalism we offer a

For an installation that requires attention to DDA regulations we offer

system that includes all the necessary parts.

complete VR system that includes all the necessary parts.

a complete system that includes all the necessary parts.

• model BT1 interface unit

• model BLP1 one button surface bellini panel

• model VRP1 one button flush panel (surface optional)

• model DDAP1/VR one button flush DDA panel (surface optional)

• model 61 speech unit

• model 340C 12v DC power supply

• model 203 surface lock release

These door entry panels and systems are designed to meet the

Each panel has one or more of the following;

requirements of the final part of the Disability Discrimination Act
(DDA). This Act requires service providers and landlords to consider

For the partially sighted;

making reasonable adjustments to the physical features of their

Each vandal resistant pushbutton has a ‘high-visibility’ halo ring. Options

premises to overcome physical barriers to access.

include permanently illuminated buttons, Braille characters and the
connection of a 12V DC tone for indication of lock release operation.

The DDA stipulates that a disabled person cannot be restricted from
gaining access to a site to obtain ‘goods or services’. This includes

For the deaf or ‘hard of hearing’;

people who use wheelchairs, blind and partially sighted people, deaf

Each panel includes two bright indicator lights; one permanently

people, people with arthritis, people with long-term illnesses and

engraved with ‘Speak Now’ when a call has been answered, and the

people with learning disabilities. This obviously has an impact on the

other engraved ‘Door Open’ for when the resident has triggered the

installation of new and existing Access Control Systems and these

lock release. The option of a Panel Inductive Loop is also available.

issues need to be considered at any Public building.
For wheelchair users;
The Bell DDA range has been designed to address the varying

Panels with an extended length can be used that allows operation from

interpretations and to assist compliance with door entry systems in a

both able-bodied and wheelchair users at different heights; the one station

cost effective manner.

panel includes two high visibility ‘halo’ buttons at differing heights.

The Bell DDA panels have been designed to address the varying

Resident or Employee facilities;

interpretations and compliance with the legislation with regards to

Added options include; a panel-mount proximity reader for resident or

door entry systems. All panels are manufactured in 2.5 mm 316 marine

employee access, keypad for resident access, a CCD camera for

grade stainless steel and can be flush or surface mounted.

connection to a video telephone and Tradesmen facilities.
47

Model
DDAP-EXT-1/VRS
surface panel

Model
DDAP-1/VRS
surface panel

Options;

Model
DDAP-3/VRS
surface panel

Illuminated push-buttons

The Bell standard budget DDA systems include audio and video

These vandal resistant stainless steel pushbuttons are offered as an

telephones, coded and proximity access.

Panel Inductive Loop

alternative to the standard high-visibility ‘halo’ buttons. They are

Many door entry specifications now require the inclusion of an

permanently lit with a bright green ring to aid partially sighted visitors.

inductive loop facility on the door panel for benefit of hearing aid

Model
DDAP-6/VRS+Proximity
surface panel

1. Standard DDA systems - model DDA/VR
These are general DDA door entry systems that include;

users. The model PANEL-IDL can be included on any of our vandal

Braille

• DDA panel with ‘halo’ buttons and indicator lights

resistant panels. The weather resistant module is permanently fixed to

In addition to the two styles of pushbutton some building specifiers

• integral speech unit

the rear of the panel with the front being engraved with the

request additional characters in Braille. Braille can be included on any

• 12v DC power supply

internationally recognised symbol.

of our vandal resistant style panels with permanent raised steel ‘pin-

• model 801 standard wall-mounting telephones

heads’. Any Braille character can be used including numbers and text.

• model 203 fail-secure lock release

Optional illuminated
vandal resistant button

Model DDA1/VR
1 way system

proximity reader

Model DDA3/VR
3 way system

Ordering information
Order using model DDA-n/VR where n is the number of stations for

2. ‘Wheelchair’ dual height door entry systems
- model DDA-EXT/VR

3. Combined DDA door entry and proximity systems
- model CSP- DDA/VR

systems with a flush panel.

These single station DDA systems have two call buttons on an

These are complete DDA door entry systems that include a proximity

Order using model DDA-n/VRs where n is the number of stations for

extended panel to enable operation from both able-bodied and

access system as a secondary form of access control for resident use.

systems with a surface panel.

wheelchair users. Each system includes;

For further information on the proximity system and for extra keyfob

e.g. DDA-1/VR is a complete 1 station flush system and DDA-4/VRS is

• DDA long panel with two ‘halo’ buttons and indicator lights

packs please refer to the ‘combined door entry & proximity systems’

a 4 station surface system

• integral speech unit

section of the catalogue.

For tradesmen facility, add the code TRDDA (A model TS200-BST time

• 12v DC power supply

clock is included).

• model 801 standard wall-mounting telephone
• model 203 fail-secure lock release
Ordering information: Order using model DDA-EXT-1/VR for a flush
system or DDA-EXT-1/VRS for a surface system.
49

Extended Model DDA-EXT-1/VR
1 way system

Video Model DDA-BS1/VR
1 way system

Proximity Model CSP-DDA-1/VR/ILL
1 way system

Order using model CSP-DDA-n/VR, where n is the number of stations

• integral speech unit

required

4. Combined ‘Wheelchair’ dual height DDA door
entry and proximity systems
- model CSP-DDA-EXT/VR

• 12v DC power supply

e.g. CSP-DDA-1/VR for a single station system or CSP-DDA-5/VR for

These are complete DDA dual height door entry systems that include

• model 801 standard wall-mounting telephones

five station system

a proximity access system as a secondary form of access control for

• model 203 fail-secure lock release

For tradesmen facility, add the code TRDDA (A model TS200-BST time

resident use. For further information on the proximity system and for

• starter fob pack (includes a ‘pack enable’ card, ‘fail-open’ card and

clock is included).

extra keyfob packs please refer to the ‘combined door entry &

Each system includes;

3 user keyfobs and shadow cards)
• full installation and programming instructions

Ordering information

• DDA door panel with Paxton compact proximity reader.

proximity systems’ section of the catalogue.

Proximity option with
illuminated button

Panel Inductive
Loop option with
Braille and ‘Halo’
button

Video option with
‘Halo’ button

Each system includes;

Ordering information

• 12v DC power supply

• DDA extended door panel with Paxton compact

Order using model CSP-DDA-EXT-1/VR for a flush system or

• model BS bellissimo standard wall-mounting video telephones

CSP-DDA-EXT-1S for a surface system

• panel and telephone controllers

proximity reader.
• integral speech unit

• model 203 fail-secure lock release

• 12v DC power supply

5. Video DDA door entry systems - model DDA-BS/VR

• model 801 standard wall-mounting telephone

These are general DDA video door entry systems. For further

Ordering information

• model 203 fail-secure lock release

information on the video system and for extra keyfob packs please

Order using model DDA-BSn/VR where n is the number of stations

• starter fob pack (includes a ‘pack enable’ card, ‘fail-open’ card and

refer to the ‘combined door entry & proximity systems’ section of the

e.g. DDA-BS1/VR is a complete 1 station video system and DDA-

catalogue. Each system includes;

BS4/VR is a 4 station system

• DDA panel with CCD camera and infra-red lamps

For tradesmen facility, add the code TRDDA (A model TS200-BST time

3 user keyfobs and shadow cards)
• full installation and programming instructions

and indicator lights

clock is included).

• integral speech unit
51

The bellissimo video door entry system is a versatile security product

System Features;

for controlling access to residential homes, blocks of flats and

• System generally connected with standard CAT5 cables

commercial premises. The video telephone allows the resident to view

• No need for separate co-axial cable

a caller at the entrance, speak with them and control their access.

• 3.5” flat screen high resolution LCD colour display
• Ringer mute function and volume control

The contemporary and stylistic bellissimo video telephone has a slim

• High resolution CCD colour day/night camera with infrared lamps

and curvaceous profile complementing most wall furnishings.

• Timed outputs for fail-safe and fail-secure lock release devices
• Optional Tradesmen facility

The ‘soft-touch’ silicone rubber push buttons are backlit and have clear
operating symbols. The telephone is wall-mounted directly without
additional mounting brackets or connectors.

• One videophone per call button and up to three extension
videophones (more with additional power supplies).
• The model BS bellissimo video telephone can be connected to a
conventional or digital panel
• Multiple entrances can be supported with the addition of one
panel and one door controller for each entrance.

Model BS1
1 way system

Model BS4
4 way system

Each standard BS packaged system provides all of the components

Ordering information

Video telephone controller model BSC4

necessary to install a complete video door entry system. A standard

Order a model BS1 for a complete single station system. For multi-

The model BSC4 interfaces up to 4 video telephones on to the CAT5

multiway BS system comprises of:

station systems order a model BS n, where n is the number of stations

distribution and provides line isolation. Each telephone has its own

• model BS bellissimo video telephones

e.g. a model BS8 is a complete 8 station system.

designated port with removable terminal blocks for ease of installation.

• model BSC4 telephone controller (one for every 4 telephones)

For tradesmen facility add the code TRBS

• model BSP front door panel and

(a model TS2000-BST time clock is included).

• relevant BSD panel controller
• model CAMBS-C CCD colour camera with infrared lamps
• model 61 speech unit
• model PS4 12v DC power supplies
• model 203 surface lock release
• full wiring and installation manual
54

Please request a copy of the installation and operation manual
prior to installation to ascertain full cable specification.

Model BS4/VR
4 way V/R system

Model BLV2
2 way bellini system

Door Panel Controllers

Model CAMBS-C camera unit

Each panel on a system is connected to a door controller for

The CAMBS is a solid state day/night colour CCD camera housed

connection to the CAT 5 distribution network and provides all inputs

in the BSP panel and protected by high- impact strength lexan

and outputs to the panel including lock output, exit, door monitor etc.;

window. The camera includes high intensity infra-red lamps for

BSD1 - one button panels

illumination of the caller at night.

BSD8 – two to eight button panels
BSD72 – nine to seventy two button panels
BSD-DIG – digital panels

brass options

bellini options

V/R options

Bellissimo video panels:

bellini options

proximity options

be manufactured for smaller systems if required. All panels are

Combined Video and Proximity (CSP-BSP series)

supplied for flush fitting but can optionally be supplied for surface

A panel-mount proximity reader is included on these panels for

Standard Aluminium (BSP)

mounting. These panels have the same specification as the standard

resident’ access. The panels are supplied for flush-fitting and with

These aluminium panels are supplied as standard in the BS1 – BS8

VRP panels

the option for surface mounting. The features of the compact

systems for surface fitting and are of the same specification as the SPA
series of audio panels. A flush-fitting back-box is available on request.

proximity reader are outlined in the ‘combined door entry and

Combined Video and Keypad (CS-BSP)

proximity’ section.

A stainless steel keypad is included on these panels for resident’

Vandal Resistant (BSP/VR)

access. The panels are supplied for flush-fitting and with the option

DDA compliant (DDA-BSP)

Manufactured in 2.5mm marine grade 316 stainless steel these panels

for surface mounting. The keypad is connected to the model 200

The DDA panels as outlined in ‘dda door entry systems’ can also be

are supplied as standard on panels with over 8 buttons but can also

controller as outlined in the ‘bellcode’ section.

used for video door entry systems.

BSC4 controller

combined brass options
BSD8 controller
digital V/R options

digital LCP options

Digital (BSP-DIG)

Concierge Station

For large block of apartments a digital panel should be considered.

The Concierge Station allows visitors to be pre-screened by on-site

These stainless steel panels give clear and concise user instructions

personnel for enhanced security.

from its bright LED. The LED dot matrix module offers excellent
visibility with large red characters. A transparent Lexan window gives

All Video panels can be independently purchased but complete

maximum protection. Stainless steel vandal resistant buttons are

packaged systems are available for most applications.

used throughout.
Please request a copy of the installation and operation manual prior
to installation to ascertain full cable specification on all video systems.

concierge station
57

The Digibell door entry telephone system is designed primarily for

• Vandal resistant stainless steel pushbuttons.

large apartment blocks in the private or public housing sector where

• Ring and lock reassurance tones.

reliability and serviceability are of prime importance.

• 4-digit coded entry facility for residents or tenants.
• Dedicated Porter/Reception call button.

The use of a digital entrance panel with keypad and display affords a

• Operates from a 12v DC power supply.

more compact solution when compared with a standard panel with

• Uses standard CAT5 cables.

one button per station which may be impractical due to its size.

• Compatible with standard model 801 telephones .
• Tradesmens facility with access code.

The Digibell system offers two levels of cable isolation;
• Full or Phone Isolation – between individual dwellings for

Optional Features of the Digibell;

buildings where vandalism from residents or tenants may

• Choice of Phone Isolation or Zone Isolation.

be expected.

• Time restricted Tradesmen facility (with model TS200-BST

• Zonal Isolation – between floors or zones for a more cost
effective system.

time clock).
• Battery Backup.
• Control equipment supplied in lockable steel cabinets for

Standard Features of the Digibell panel and system;

greater security.

• Capacity for over 400 apartments and 16 entrances per block.

• Compliance with Disability Discrimination Act (DDA).

• Large 4-digit LED display with informative messages e.g. CALL

• Extension tones and Flashing Beacons.

TALK OPEN.
• Alphanumeric apartment numbers e.g. 21A, A21.

• Firemans Switches.
• Vehicle and Pedestrian Gate Integration.

• High quality full duplex speech.

Model BS-A

Model 801

Model DBAP/DDA-S

Model DBAP/VR

Model

Privacy
Of Speech

Ring Tone Mute
Slide Switch

Button with indicator;
adjustable mute time

Digibell Panels Options

system. Telephones connected to a DBA-4I isolator have

All door panels are manufactured from marine grade stainless steel

Door Open

privacy of speech inherent in the design and models 801P and

and have vandal resistant pushbuttons. A 4-digit red LED dot-matrix

Indicator

801PS should not be used. All telephones connected to the

display is mounted behind a LEXAN window. Both flush and surface

same DBA-8Z isolator must be the same model. As standard a

fitting panels are available in the standard version and these are also

maximum of two telephones are allowed in each apartment.

suitable for factory fitting to one of our stainless steel posts. All panels

801

801S

801P

801PS

BS-LX

include security screw fixings.
The entrance panel should be sited in a semi-sheltered
location. All of its electronics are encapsulated in a single
module

providing

conditions.
60

Video option

Our standard telephones are suitable for use with the digibell
Telephone Options:
Telephone

Model DBAP/LCP

protection

against

environmental

Model DBAP/VR

Panel Model

Description

System and Panel Controllers

An example of the parts required for a typical system;

DBAP/VR

Flush stainless steel standard digital panel

Each digital controller requires it own controller and telephones are

One block of 32 flats with one entrance

DBAP/VRS

Surface stainless steel standard digital panel

connected to the system with a choice of two isolator controllers.

32 -

model 801 telephones

DBAP/DDA
DBAP/DDA-S

Flush stainless steel DDA digital panel

model DBAP/VR digital panel

with halo buttons

Part No.

Description

model BSD-DIG panel controller

Surface stainless steel DDA digital panel

BSD-DIG

with halo buttons
DBAP/LCP

Flush stainless steel digital ‘Laser Cut’ digital panel

DBA-4I

Digital door controller (1 required for each

model DBA-8Z isolator controllers

digital panel)

model PS4 12v DC power supply

4 way phone isolator (1 required every 4

model 203 lock release

apartments)
Proximity Fob readers can optionally be integrated into any of the
digital panels. We can either supply the panels with the reader or just
include the cut out and studs for retrofit.

DBA-8Z

8 way zone isolator (1 required every 8

Digital systems with bellissimo colour video telephones or bellfree

apartments)

colour apartment stations are also readily available. Please contact our
sales department for further information and for parts lists.
61

BSX (Bell System Exchange) and DAX Digital Isolating
Door Entry Systems
The BSX and DAX door entry systems are designed to overcome a
common problem experienced in local authority and public housing
where door entry systems are subject to vandalism from visitors and
tenants. These systems operate on the Line Isolation principle which
has two advantages over common-wired systems:

• Any malicious damage sustained to an individual telephone or
its associated cable will not affect the operation of the rest of
the system.
• The telephone conversation between the tenant and the caller is
totally private.

Each system includes Tradesmen/Service entry, a battery standby
facility and timed lock output (failsafe and failsecure) as standard. The
central exchange unit with diagnostic LED’s simplifies maintenance
and any part is easily exchanged with readily available spares.

BSX8 Cabinet

Model 801

Model LCP7

Model BS-LX

The BSX control unit

Telephones

The BSX control equipment is housed in a secure lockable steel IP55

• Optional access control e.g. Proximity controllers.

Any of our standard telephones may be used with the BSX exchange.

rated cabinet and can include the following:

• Adjustable lock, ring and talk times.

Each telephone connected to the BSX control will have ‘privacy of

• Isolating fused PCB removable connectors for the telephones.
• A model TS2000-BST 7 day quartz reserve time clock for trades access.

telephones must be individually cabled directly to the control unit. The

• Regulated PSU with isolation switch.

BSX8

8 station single door

standard model 801 telephones can be used for economy but the

• A control PCB for each entrance providing timed output for door

BSX8-2

8 station two door

model BS-LX is highly recommended due to its added functions.

releases (failsafe and failsecure), output tones and inputs for

BSX16

16 station single door

trades buttons.

BSX16-2 16 station two door

• A 12V 7A/H battery when battery standby is specified.

speech’ due to the line isolation. To achieve full 'line-isolation', the
Four BSX Control units are available;

Telephones must be rung and answered before the lock can be
released. A stuck unlocked button is ignored.

Front door panels

Tradesmen facility

Electric lock release

The model VRP and model LCP panels are recommended for use with

The facility for a time-restricted entry for tradesmen is included on the

The BSX control provides an outputs for both failsecure and failsafe

the BSX system due to their resistance to vandalism.

BSX control. The operation of the Trades push-button will only trigger

lock releases (including magnetic locks).

the door release when the time clock within the BSX control is set to

Reassurance tone

an ON period.

A reassurance to the visitor that a call has been made and to indicate
when the lock release has been operated.

Model DPX-VR
DAX32 Cabinet
Model DPX-LED

Model 801

Model BS-LX

The DAX digital system operates on the Line Isolation principle which

System features;

Model DAX exchange control

has two advantages over common-wired systems;

• up to 256 flats

All the control equipment is installed in one or more IP55 rated secure

• up to 4 entrances

lockable steel cabinets. Each control contains one or more of the

• large LED dot matrix display

following components;

• 4 digit alpha-numeric flat numbers

• All necessary control equipment

• 4 digit coded access facility

• 8 way Relay PCB’s for connection of telephones

• trades facility

• Model TS2000-BST 7 day quartz reserve Time Clock for trades access

• porter facility (optional)

• 12v DC 5A power supply with standby facility

• standby battery backup

• optional 12v 7A/H lead-acid battery

• outputs for fail safe and fail secure releases

The control has LED diagnostics and Test modes for commissioning

• Any malicious damage sustained to an individual telephone or its
associated cable will not affect the operation of the rest of the system.

• The telephone conversation between the tenant and the caller is
totally private.

and maintenance purposes
66

Model DPX-LED Front Door Panel

The LED dot matrix display module offers excellent visibility with large

Telephones

The front-plate consists of an overlapping bezel and a removable plate

red characters. A transparent LEXAN window gives maximum

Any of our standard telephones may be used with the DAX

cut by a laser from the same sheet of 2.5 mm 316 marine grade

protection from vandals. Stainless steel vandal resistant push-buttons

exchange. Each telephone connected to the DAX control will have

stainless steel. This leaves a gap of just 0.35 mm rejecting implements

are used throughout. Clear operating instructions are engraved on the

‘privacy of speech’ due to the line isolation. To achieve full isolation,

that could be used to force the panel from its box.

panel in black.

each telephone station must be individually and directly cabled to
the DAX control. However, the system is able to operate in partial

The bezel is securely welded to a back-box of 1.5 mm 316 grade

For economy, the standard Model DPX-VR can also be considered.

stainless steel. This provides an extremely strong fixing to the wall. The
removable plate is fixed to the bezel and back box with countersunk

isolation mode commonly referred as ‘zone isolation’ for more
economic cable installation.

Options can include cutouts for a Video camera and Proximity.

A2 stainless steel security bolts requiring the use of a specialist tool for

The standard model 801 telephones can be used for economy but the

their removal (supplied).

model BS-LX is highly recommended due to its added functions.
67

It is common for a door entry telephone system to be combined with

Paxton Compact panel Mount Reader

a proximity access system to allow easy access by residents, tenants

This compact panel-mount reader is manufactured by Paxton Access

or staff.

for exclusive use in Bell System door entry systems. It is mounted on
the rear of the panel by four secure threaded studs and nuts and

Distributors have sourced products from two manufacturers but now

protected on the front by a Lexan window. The proximity compact

two Great British manufacturers have combined their leading

reader contains all the electronics inside the reader, from which come

products to offer an outstanding integrated access control system.

three cable pairs connecting to the power, electric release and,

The inclusion of an exclusive Paxton compact standalone reader on

optionally, an exit button. The lock output is fail-secure by default

door entry panel allows authorised personnel free entry to the

with a timed lock output set at 5 seconds. Alternatively, the fail-open

building by means of a keyfob whilst visitors’ access can be controlled

card (included in the starter keyfob pack) can be used to change the

by the Bell System door entry telephone.

lock output to operate a fail-safe lock

The proximity system is the ideal access control solution in situations
where no central programming or reporting is required. Validating
and voiding of users is achieved with a unique shadow card system,
and all system programming is performed with the easy to use
function cards. All packaged systems include a starter pack of keyfobs
and additional keyfobs can be purchased as required.

Starter Keyfob Pack

Keyfob Packs

Door open time card: Sets the amount of time the lock is energized for.

Each CSP system includes a starter keyfob pack consisting of;

A ‘shadow card' system is used for ease of management and the

Fail open release card: Presenting this card reverses the operation of

• One Enrolment card

keyfobs are supplied with a wallet for storing the shadow cards.

the lock output to make it suitable for operating a fail open release.
Presenting this card again reverts operation to the default.

• Three Proximity user keyfobs
• Three user shadows

When installing the system the Starter keyfob pack is added by

Silent operation card: Disable the sounder in the reader. Presenting

• One fail-open release card

presenting the Enrolment card from that pack. Subsequent packs are

this card again enable the sounder.

Additional keyfob packs can be purchased as required.

added by presenting the original Enrolment card followed by the

The full Function Card Pack can be considered for further features

Enrolment card from the new pack. Further configuration is done

Each keyfob is packaged with a corresponding shadow card. Once

or functions.

using the other cards in the pack

installation of the system is complete all user cards are valid and ready
to be issued. Keyfobs are available in packs of 10, 25, 50 or 100 users.
Proximity Function Card Pack – model 820-000.

Model CSP1
1 way system

Model CSP6/VRS
6 way system

The starter keyfob pack included in the system is sufficient to get the

CSP Standard Front Door Panels (7 buttons maximum)

CSP Vandal Resistant Front Door Panels (any size)

system started and in many installations no further features or functions

These panels are similar to the standard audio SPA style panels and are

The vandal resistant panels are manufactured from 2.5 mm 316

are required. However, the full function card pack allows the more

manufactured from 3 mm anodised aluminium with an integral grill

marine grade stainless steel. Panels are flush mounted and fixed to the

advanced features of the proximity system to be utilised including

protecting the speech unit. The compact proximity reader is protected

back-box by tamper proof bolts (a special key is required to remove

zoning with three differing coloured fobs and timing options.

by a Lexan window.

the panel). Optionally, the panels can be supplied with stainless steel
housing for surface mounting.

As standard, the panels are supplied with a low-profile surface
mounting box moulded in black. Alternatively, the panels can be

A single model IP68 stainless steel vandal resistant button is provided

supplied with a flush fitting zintec back-box and vandal resistant

for each flat and the option of one for Tradesmen. The engraving of

bolts. The largest available panel has 7 buttons and thereafter the

flat numbers is included in the price of each system. Further engraving

vandal resistant style should be used.

(e.g. Block names) can be included for a modest surcharge.
71

Model CSPP1

Model CSPP1/VRS

Model CSPP2/VRS

CSP Series proximity systems
These systems are conveniently packaged with all necessary components
to complete an installation including a starter pack of keyfobs.

• starter keyfob pack (includes an ‘enrolment’ card, a ‘fail-open’ card
and 3 user keyfobs and shadow cards)
• full installation and programming instructions

A standard CSP series system comprises of;

Combined video systems

• model 801 standard wall telephones

The convenient range of packaged systems can also include video

• model CSP aluminium door panel with compact proximity reader.

telephones. These systems include;

(Panels above 7 buttons are vandal resistant).

• 12v DC power supply
• model 203 surface lock release
72

• model 61 speech unit
• relevant video controllers
• 12v DC power supply
• model 203 surface lock release

Additional packs of keyfobs can be purchased to the required number.

• model 61 speech unit

Model CSPP4

• model BS bellissimo video telephones
• model CSP stainless steel vandal resistant style panel with colour
CCD day/night camera
• compact proximity reader

• starter keyfob pack
(includes an ‘enrolment’ card, a ‘fail-open’ card and 3 user keyfobs
with their shadow cards)
• full installation and programming instructions

Bellissimo
Video Telephone

V/R option

Model PROX-REAR Rear door Paxton proximity system

Model PAX-2-S reader
in surface V/R housing

Video option

Ordering information:

Model PAX-2 reader in
flush V/R housing

Video CSP systems

This kit includes all the basic components to achieve proximity access at a

Order using CSP-BSn/VR, where n is the number of stations

single door. This system is ideal for giving proximity access at the rear door

Standard CSP systems

when a complete model CSP system has been installed at the front entrance.

Order using CSP-n, where n is the number of stations

For surface use /VRS

This PROX-REAR system comprises of;

e.g. CSP-1 for a one station

For tradesmen facility us ethe code TRCP

e.g. CSP-BS1/VR for a one station

CSP-2 for two stations

• stainless steel panel with compact proximity reader and flush backbox (surface option available)

CSP-BS10/VR for two stations

(A model TS2000-BST time clock is included)

Vandal Resistant CSP systems

• 12v DC power supply

Order using CSP-n/VR, where n is the number of stations

Additional keyfobs;

• model 203 surface lock release

e.g. CSP-1/VR for a one station

No.of fobs in Pack = Code

• starter keyfob pack (includes an ‘enrolment’ card, a ‘fail-open’ card

For surface use /VRS

CSP-10/VR for ten stations

10 = 820-010G 25 = 820-025G 50 = 820-050G 100 = 820-100G

and 3 user keyfobs with their shadow cards)
• full installation and programming instructions
73

These bellcode access control systems are high quality versatile security

The model 200 Controller

product controlling access through doors by means of a digital keypad

The model 200 controller is housed in a stylish and discrete plastic

and electric lock release. The use of a separate controller ensures that

box. Security is further enhanced by placing the controller in a secured

no amount of tampering with the keypad will undermine the system’s

area. This arrangement provides a superior level of security when

security. For convenience the system is programmed from the keypad

compared to many combined keypad/controllers in the market.

and offers a wide range of useful functions.

Programming is easily achieved by entering a ‘security code’ and then
a sequence of simple codes at the keypad.

The secure model 200 controller may be programmed with up to ten

The main features are;

unique codes. If a valid code is entered on the keypad, the lock release

• Ten access codes (programmable from 1 to 8 digits).

will operate for a preset duration. The controller may be programmed

• Timed lock outputs for fail-secure and fail-safe lock releases.

to operate an audible alarm under various circumstances and disable,

• All functions are stored in a protected non-volatile 'EEPROM'

the lock output if necessary. The access codes and other programmable

memory. The access codes and other programmable parameters

parameters are retained indefinitely without power.

are retained indefinitely without power.
• Provisions for a ‘push to exit’ egress switch input.

The keypads have a green and red LED to indicate the system status to

• Space for an extra model 201 control PCB for second door and keypad

the user; the green indicates that the lock release is operating, whilst

• Additional programming functions include;

the red LED indicates an invalid entry or alarm condition.

Lock duration

(1 - 99 seconds)

Lock delay time

(0 - 99 seconds)

Alarm duration

(1 - 99 seconds)

Key limit

(0 - 99 keystrokes)

Code entry time limit

(0 - 99 seconds.)

Duress access mode
Dimensions: H = 230mm, W = 185mm, D = 45mm
75

Model 217 keypad

Model 216 stainless steel keypad

Model 216F flush stainless steel keypad

The bellcode 218 keypad is a slim-line touch sensitive keypad with

The keypad and push-buttons are manufactured in a high grade 316

A flush mounting keypad supplied with a metal flush back box. It is of

no moving parts (uses Piezo technology) designed for operation in

stainless steel and is ideal for sheltered external locations. The back-

identical design to the standard 216 keypad but has larger overall

all environments. It is manufactured in aluminium and anodised for

box is a robust alloy casting which is aluchromed and then powder

dimensions to ensure an adequate overlap.

complete weather protection. The electronics are potted making

coated for maximum protection.

the keypad waterproof and rated at IP68. Each push-button is

Model 216 keypad

Model 218 keypad

Model 218 bellcode keypad

Dimensions (mm):

clearly defined and a re-assurance tone is available to indicate a

The keypad is fixed to the box with Allen type security bolts. It is

Keypad

positive key-stroke. A green and a red LED are included to indicate

recommended for most sheltered environments. A green and a red

Flush box H = 117mm, W = 71mm, D = 25mm

H = 141mm, W = 95mm

operational status.

LED are included to indicate operational status.

Dimensions: H =103mm, W = 66mm, D = 20mm

Dimensions: H = 135mm, W = 90mm, D = 30mm

Model CK200 one door system

Model CK109 one door system

Model CK110 one door system

Model 217 slim-line keypad

Model CK200 coded access system

Model CK110 coded access system

This keypad is manufactured in similar fashion to the 216 but has two

• model 218

• model 217

columns of 6 keys (instead of 3x4) in order to produce a slimmer

• model 200

boxed controller

product suitable for door frames.

• model 340C

12v DC power supply

• model 200

boxed controller

standard rim lock release

• model 340C

12v DC power supply

• model 203

standard rim lock release

• model 203

Touch sensitive slim-line keypad

Dimensions: H = 132mm, W = 40mm, D = 27mm
Complete boxed systems, ideal for the both distributor and installer;

stainless steel slim-line
surface keypad

Model CK109 coded access system
• model 216

stainless steel surface keypad

• model 200

boxed controller

• model 340C

12v DC power supply

• model 203

standard rim lock release
77

A frequent requirement for a door entry system is the facility of a
coded access system. This allows residents, tenants or staff the means
to enter to the building by the operation of an integral keypad
at the main entrance panel.

The CS109 are combined door entry and coded access systems utilising
a panel mounted stainless steel keypad. The system has an independent,
secure controller and therefore can be considered when a high level of
security is necessary. It is available from a single station system up to any
number of telephone stations. However, the keypad feature is available
on any of our door entry systems and can be included with vandal
resistant VRP or LCP style panels, video and brass panels.

The CP109 keypad may be programmed with up to ten unique access
codes. If a valid code is entered on the keypad, the lock release will
operate for a preset duration. The keypad has one green LED and one
red LED to indicate the system status to the user: the green LED
indicates that the lock release is operating, whilst the red LED
indicates an invalid entry. There are ten user access codes and a wide
range of programmable functions.

Model CS109-1
1 way system

Model CS109-4
4 way system

Model 200 controller

Model CP109 Front door panels

A CS109 series systems comprise of

This controls access to one door by means of the stainless steel keypad

The standard panel is attractively designed and manufactured in 3

• model 801 wall mounting telephones

on the front door panel and is housed in an attractive and discreet

mm brushed anodised aluminium. It has an integral robust stainless

• model CP109 aluminium door panel with stainless steel keypad

plastic box. The programming is easily achieved by entering a security

steel keypad of similar design to the model 216 keypad and should be

• model 51 speech unit

code and a sequence of simple codes at the keypad. The controller has

sited in a sheltered location. The panel has a push-button for each

• model 200 independent boxed controller

ten codes available each of which can be 1 to 8 digits. Please refer to

telephone station and can be supplied for surface or flush-mounting

• model 340C power supply

the Coded Access Control section for a list of features and

up to 7 buttons and in vandal resistant up to any size. These panels

• model 203 surface lock release

programmable functions.

can also be manufactured in stainless steel or and include a camera

• full installation and programming instructions

for connection to the bellissimo video entry systems.

V/R option

Brass option

CS 109 Series Combined Coded Access & Door Entry Panel Dimensions
CP109-1 to CP109-7 and CP109-1F to CP109-7F

Ordering information

Flush Panel (F)

Order using model CS109-n, where n is the number of stations required
e.g. CS109-1 for a single station system or CS109-12 for a

Panel (mm)
H

CP109-1

270

259

288

100

CP109-2

370

359

388

100

CP109-3

370

359

388

100

CP109-4

370

359

388

100

CP109-5

470

459

488

100

CP109-6

470

459

488

100

CP109-7

470

459

488

100

12 station system.
For tradesmen facility append the code TRCS.
(A model TS2000 time clock is included).

Surface Panel

Panel

Backbox (mm)

Sizes above 7 buttons are vandal resistant.
Panel dimensions are approximate and may change without notice.
81

The CS106 are combined door entry and coded access systems

The C106 standalone keypad may be programmed with up to ten

utilising an economic C106 standalone keypad module. These can be

access codes of between 1 to 8 digits. The extra codes are provided

considered where a low level of security is deemed to be adequate.

for multi-user application or for timed restricted access (additional

Should a high level of security be necessary then the CS109 combined

time clock required). The keypad has both fail secure and fail safe lock

systems should be used.

outputs and an exit facility from a remote push-button. Other
programmable features include lock duration and lock delay time.

The C106 keypad may be programmed with up to ten unique access

The access and user programs are stored in a protected non-volatile

codes. If a valid code is entered on the keypad, the lock release will

EEPROM memory and all programmed features are retained

operate for a preset duration. The keypad has one green LED and one

indefinitely without power.

red LED to indicate the system status to the user: the green LED
indicates that the lock release is operating, whilst the red LED
indicates an invalid entry. There are ten user access codes and a wide
range of programmable functions.

Two panels are available the CP106 (SPA style) with a maximum of
7 buttons and the BL106 (bellini style) with a maximum of 6 buttons.
For larger systems the CS109 combined systems should be used.

Model CS106-1
1 way system

Model CS106-4
4 way system

Model CP106 front door panels

Standard combined system – CS106 series

These panels are similar to the SPA style panels and are manufactured

Each systems comprise of;

from 3 mm anodised aluminium. They should be sited in a position
that is protected from adverse weather conditions. They are available
for either surface or flush fitting.The C106 keypad module is designed
to complement the panel, push-button and surface box in a
contemporary style. The module has outputs for both failsafe and
failsecure lock releases and connection for an exit button.

The largest available panel is of 7 buttons and the CS109 series should be
considered on any larger system.
84

• model 801 wall mounting telephones

CS106 Standalone Door Entry & Coded Access Combined Panel Dimensions
CP106-1 to CP106-7 and CP106-1F to CP106-7F

Flush Panel (F)
Panel

Panel (mm)

Surface Panel

Backbox (mm)

• model 61 speech unit

CP106-1

270

259

288

100

• model 340C power supply

CP106-2

370

359

388

100

• model 203 surface lock release

CP106-3

370

359

388

100

• full installation and programming instructions

CP106-4

370

359

388

100

Ordering information
Order using model CS106-n, where n is the number of stations required
e.g. CS106-1 for a single station system or CS106-5 for five station system
For tradesmen facility append the code TRCS
(A model TS2000-BST time clock is included).

CP106-5

470

459

488

100

CP106-6

470

459

488

100

CP106-7

470

459

488

100

• model CP106 aluminium door panel with integral keypad module

Sizes above 7 buttons are not available – see CS109 page 74
Panel dimensions are approximate and may change without notice.

BLP106 series

Model BLP106 surface front door panels

Bellini combined system – BL106 series

Ordering information

These new stylish panels can be considered as an elegant alternative

Each systems comprise of;

Order using model BL106-n, where n is the number

to the traditional CP106 panels. These surface mounted panels are

• model 801 telephones

of stations required

manufactured from anodised aluminium with a contemporary design

• model BLP106 aluminium door panel with integral keypad module

e.g. BL106-1 for a single station system or BL106-5 for five

and profile. The largest available panel is of 6 buttons and the CS109

• model 61 speech unit

station system

series should be considered on any larger system. Panel dimensions are

• model 340C power supply

For tradesmen facility append the code TRBL

given in the bellini panel section of the catalogue.

• model 203 surface lock release

(A model TS2000-BST time clock is included).

• full installation and programming instructions

Posts
The mounting of an entrance panel on a post is often required for a variety of applications e.g. for buildings where
a wall mounting panel is not suitable or for entrances to car parks.

The posts are manufactured from polished stainless steel and are designed to accommodate surface vandal
resistant panels of all sizes. The posts have a stainless steel pedestal welded to the base with fixing holes pre-drilled.

All posts are supplied with surface vandal resistant panels pre-fitted and cable entries pre-drilled. Select the
appropriate post and order together with the chosen panel design. The panels can be multi-button, video, digital
or combined with proximity or coded keypad.

Please contact the Sales Department for guidance on suitable panel designs.

Code

Description

Height mm

CHP1

Car Height Post

1200

PHP1

Pedestrian Height Post

1600

DHP1

Dual Height Post - Pedestrian / Car

1600 / 1200

DHP2

Dual Height Post - HGV / Car

2000 / 1200

Post Width: 80mm

Model TS2000-BST

Extension sounders

12V quartz reserve time clock with auto British Summer Time settings.

These units extend the call tone of a door entry telephone to other areas of the premises
to improve audibility. The unit is fabricated in white ABS plastic and can be wall mounted

The TS2000-BST time clock has the facility of automatically adjusting to European/British

in a convenient indoor location. Available models;

time settings. Once the user has programmed the date the clock will automatically adjust

Model RT27 for extensions to the standard 801 telephones

each spring and autumn. This digital timer is purpose made for access control systems

Model BS-RT for extensions to the bellissimo telephones

as it operates from a supply voltage of 12v AC/DC. The clock is designed for wall-

Dimensions: H = 120mm, W = 90mm, D = 38mm

mounting and its main features are;
• Automatic European Time adjustment

Sound Generator and extension tone

model SG1

• 12V AC/DC operating voltage

Like the models above this unit provides an extension of the call tone on a door entry

• LCD display

telephone. In addition to an output of 80 dB at one metre it has 8 user selectable tones.

• Quartz crystal timing with reserve

The unit can be triggered either from a 12 Volts source or from a switch.

• Daily and weekly programs

Dimensions: H = 120mm, W = 90mm, D = 38mm

• 7 day programming
• 8 on/off periods
• 15 repeat options: day, week, weekend, odd weekdays etc.

Flashing beacon

• manual override

This unit gives an effective visual indication of a call at the door entry telephone. This

model FB31

• switching capacity 10A/30V DC

unit is ideal for the 'hard of hearing' or areas with a high level of background noise.

Dimensions: H = 98mm, W = 66mm, D = 40mm

The beacon includes a timer circuit that can be set for between 4 and 40 seconds.
(A model 212 power supply may be required).
Dimensions: H = 113mm, W = 80mm, D = 60mm

Speech unit model 61
This compact unit is fitted to the entrance panel on all our current door entry systems

Flashing beacon

model BS-FB (bellissimo)

(except as indicated below). The unit provides two-way speech and has an individual

This unit gives an effective visual indication of a call at the bellissimo door entry video

volume control for both microphone and speaker. This universal product can be powered

telephone. This unit is ideal for the 'hard of hearing' or areas with a high level of

from either 12V AC or 12V DC depending on the model of telephone used.

background noise.

Dimensions: H = 97mm, W = 58mm, D = 24mm

Dimensions: H = 113mm, W = 80mm, D = 60mm

Speech unit model 51
This unit is generally required as a replacement unit for older systems or for SPA panels
above 10 buttons. The unit provides two-way speech and has an individual volume
control for both microphone and speaker. This universal product can be powered from
either 12V AC or 12V DC depending on the model of telephone used.
Dimensions: H = 136mm, W = 81mm, D = 30mm

Model

12V AC

12V DC

Surface

These switches are typically used an access control system to release the door upon

202

✔

exiting in the absence of a manual lock release. The model B24S stainless steel push-

203

✔

204

✔

205

✔

✔
✔

Exit Switch model 5077 and model 5077L (LED indication)

button is incorporated and is designed for heavy use.
Dimensions: H = 110mm, W = 60mm, D = 34mm

206

An alternative style exit switch with the panel manufactured in 2.5 mm 316 marine

FailSecure

FailSafe

Continuously Monitor
Rated
Switch

✔

✔
✔

✔

2208

✔

2208 M

✔

✔
✔
✔

2208 F

✔

permanently engraved and includes a model B24S vandal resistant push-button

2208 FM

✔

Standard Release Pressure: withstands up to 300 Kg of impact (breakdown at 600 Kg)
Heavy Duty Release Pressure: withstands up to 500 Kg of impact (breakdown at 1000 Kg)

Plate Dimensions: H = 100mm, W = 100mm
Back-box dimensions: H = 75mm, W = 75mm, D = 45mm

Exit Switch (miniature surface mounting)

Heavy
Duty

✔
✔

grade stainless steel and designed to fit a standard single-gang back-box. The panel is

designed for heavy use.

Delayed
Action

✔

210

209

Exit Switch (flush mounting) model 5078

Mortice

model 5080

Power Supplies
Model 212 (12v AC)

This slim-line surface fitting exit switch is manufactured in a robust alloy casting and has

A wall-mounting, double insulated, fused transformer included in basic audio door entry

universal graphic symbols and is perfect for architrave fitting. The switch is rated at 3A

systems up to 10 stations. It has a nominal output of 12v AC @ 1A. Compliant with EN60950.

with 12v – 24v.

Dimensions: H = 140mm, W = 60mm, D = 53mm

Dimensions: H = 83mm, W = 32mm, D = 25
Model 225 (12v AC)
A wall mounting, double insulated, fused transformer for use with door entry telephone
Fire Switch (Flush)

systems. This supply incorporates a relay for the direct operation of the lock release to

model FS1-F

Flush mounting stainless steel Fireman’s Drop-Key Switch with security fixings and

overcome possible voltage drop on larger systems. It has a nominal output of 12V AC @

permanently engraved with FIRE CONTROL.

2 Amps. Compliant with EN60950.

Dimensions: Plate

Dimensions: H = 110mm, W = 235mm, D = 80mm

Box

H = 150mm, W = 150mm
H = 107mm, W = 107mm, D = 65

Model 340C (12v DC)

Fire Switch (Surface) model FS1-S

A wall-mounting fused 12v DC regulated power supply rated at 1.5 Amp for use on DC

Surface mounting red powder coated Fireman’s Drop-Key Switch with stainless steel

door entry systems and our Access Control systems. It can also be used for directly

plate and security fixings, permanently engraved with FIRE CONTROL.

powering failsafe and continuously rated lock releases. Compliant with EN60950.

Dimensions: H = 115mm, W = 115mm, D = 72

Dimensions: H = 140mm, W = 60mm, D = 53mm

Lock Releases

Model PS4 (12v DC)

The standard lock releases are designed to operate with night latch locks on timber

A wall-mounting fused 12v DC regulated power supply rated at 4 Amps for use on video

framed doors. Each release is fabricated from a variety of materials;

entry systems and for powering high current door release mechanisms.

• Main mechanism - plated zinc

• Latch - chrome-plated mazac zinc alloy.

Compliant with EN60950. Dimensions: H = 110mm, W = 235mm, D = 80mm

• Faceplate - epoxy painted steel

• Side cover - stainless steel

Model BC-04

Simple identification label replacement

Model BC-10

The Bellcall is a versatile emergency call system which lends itself to a

The Bellcall emergency call system allows individuals, be they patients,

Some of the features of the Bellcall system;

multitude of applications in a number of different markets. Although

residents or staff, to initiate an alarm call in order to obtain assistance.

• Manufactured in the UK.

these systems are typically installed in care and nursing homes there

An indicator panel will alert an attendant by sounding an alarm and

• Hard-wired; standard alarm cable or CAT5.

are other market sectors that have emergency call systems installed;

by illuminating an LED lamp. Each Lamp has a nameplate label to

• Call point units fit standard single or double gang electrical boxes

• Care Homes • Nursing Homes • Private Hospitals and Hostels

identify the caller or room. The call is generally cleared by attending

• Housing, Employment and Benefit offices • Interview Rooms
• Doctor Surgeries and Medical Centres • Disabled Toilets
• Leisure, Fitness, Health, Spa and Beauty Centres

(surface or flush).

the room where the call originated and by resetting the callpoint.

• Operates on 12v DC with optional standby battery.

Calls can be made from either a wall-mounted callpoint, a ceiling pull

• Two call levels; standard or emergency with differing alarm tones.

switch or a pendant (pear-drop) switch.

• Call reset using pushbutton and/or magnetic key
• Alarm Tone mute.
• External alarm relay.

• Police Stations • Remand Centres • Immigration Centres
90

Model BC-10

Model BC-20

Model BC-30

Indicator Panels

Each panel has three back-lit symbols;

Standard Call Point – generates standard calls.

There are four models of indicator panel available; 4-zone, 10-zone, 20-

Power

Blue

Power On

Emergency Call Point – generates emergency calls. Commonly used

zone and 30-zone. Up to four indicator panels (10, 20, 30-zone) can be

Urgent

Red

Flashes in response to an Emergency Call

in Care Homes.

connected together to give a maximum of 120 zones on one system.

Cancel

Amber

Flashes in response to a standard Alarm

Alert Call Point – allows a user-generated standard call or an alert call

(also press to mute)

by staff in order to call for assistance. Commonly used in Nursing
Homes and Hospitals.

The 10, 20 and 30-zone panels are of a contemporary style in white
with grey contrasting background to aid identification of the caller.

Model

Description

Dimensions

These Indicator panels are designed for surface fitting onto any

BC-04

4-zone indicator panel

85 x 145 x 35 mm

All call points offer two methods of Call Reset which are selectable at

convenient wall to maximise visibility for the attendants. The panels

BC-10

10-zone indicator panel

180 x 160 x 35 mm

installation;

have touch-sensitive buttons for the attendant functions such as

BC-20

20-zone indicator panel

180 x 290 x 35 mm

Button Reset

For general use

alarm mute.

BC-30

30-zone indicator panel

180 x 420 x 35 mm

Magnetic Key Reset

For use generally in Nursing Homes to

The 4-zone panel (model BC-04) is an attractively designed, compact

Call Point Units

unit which can be flush or surface-mounted onto a double gang

All call points fit standard surface or flush fitting single gang

electrical box.

electrical boxes. Any number of call points can be can be wired into

prevent patients or the caller cancelling

a single zone. There are essentially three types of callpoint models
The 10, 20, 30-zone panels all have replaceable strips which can be

available, each available with or without a jack socket; the jack socket

printed with a description of the alarm zone, or for example a patients

is for the connection of a pendant switch also commonly known as a

name or a room number. This flexible system allows the attendants to

‘pear push’ switch:

make regular changes without damaging or marking the panels.

their call.
Model

Description

Dimensions

BC-CP

Standard Call Point

85 x 85 x 35 mm

BC-CPJ

Standard Call Point with Jack Socket

85 x 85 x 35 mm

BC-EP

Emergency Call Point

85 x 85 x 35 mm

BC-EPJ

Emergency Call Point with Jack Socket

85 x 85 x 35 mm

BC-AP

Call Point with Alert

85 x 85 x 35 mm

BC-APJ

Call Point with Alert with Jack Socket

85 x 85 x 35 mm

Model BC-CP

Model BC-CPJ

Model BC-EP

Model BC-EPJ

Model BC-AP

Model BC-APJ

Standard range of peripherals and accessories

Model BC-OD (illuminated)

Model BC-PD2
Model BC-PD3

Pendant switch

Model BC-CS

BC-PD2 and BC-PD3

Model BC-K10
Model BC-K50

Model BC-ODS

Ceiling pull switch

BC-CS

Model Description

Dimensions

BC-PD2 Pendant Switch with 2m lead & jack

140 x 40 x 20 mm

BC-PD3 Pendant Switch with 3m lead & jack

140 x 40 x 20 mm

BC-CS

85mm diam. x 25mm

Ceiling Pull Switch

A hand-held switch typically used for patients in bed or seated on a chair.

Ceiling pull-switches provide auxiliary call points within a room. These

BC-OD Over-door indicator light

The switch has been ergonomically designed for comfort and has a

switches are surface mounted and are typically installed in bathrooms

BC-ODS Over-door indicator light with sounder 85 x 85 x 45 mm

reassurance light when operated. If the lead is inadvertently removed from

or toilets. They are supplied with two red triangles to aid pulling the

BC-K10 Magnetic Reset Keys (pack of 10)

60 x 15 mm

its socket on the call point a call will automatically be generated. Two

cord; one for standing use and one for prone use. A red re-assurance

BC-K50 Magnetic Reset Keys (pack of 50)

60 x 15 mm

models are available one with a 2 metre lead and one with a 3 metre lead.

light illuminates on the ceiling unit when a call is made.

85 x 85 x 45 mm

Power supply requirements
Over-door light

BC-OD and BC-ODS

Magnetic reset keys

BC-K10 and BC-K50

The system is powered by 12v DC power supplies only;

These lights are typically installed in corridors outside rooms or wards

All call points can be reset using either a Push-Button or a Magnetic

Model 340C

12v 1.5A for basic systems

to indicate when a call has been generated. Up to 4 zones can be

Key. These bright yellow keys are typically required in care and nursing

Model 640

12v 1A battery backup supply

combined to cover common areas. Two model are available; a

homes, to prevent the patient from cancelling their call. The keys are

Model PS4

12v 4A for system with more than 10 Over-door lamps

standard model and a model that includes a sounder.

supplied in packs of 10 or 50 each with a key ring.

Model 840

12v 4A battery backup supply

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Neil Burchett
Create Date                     : 2014:05:16 16:23:12+01:00
Modify Date                     : 2014:05:16 16:23:12+01:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37
Creator Tool                    : QuarkXPress 8.5
Producer                        : Acrobat Distiller 9.4.6 (Macintosh)
Format                          : application/pdf
Creator                         : Neil Burchett
Title                           : BELL_2014_catalogue_Aw_inner_Bell_2009_catalogue_aw
Document ID                     : uuid:54e16a9d-7bb5-4b37-833a-ed153050e068
Instance ID                     : uuid:304c4799-375d-483b-b15a-97c9c1f0afdf
Page Count                      : 92

EXIF Metadata provided by EXIF.tools

BELL_2014_catalogue_Aw_inner_Bell_2009_catalogue_aw Bell System Full Product Catalogue

Navigation menu

Versions of this User Manual:

Views

Navigation