RN4020 Bluetooth Low Energy Module Data Sheet MP Tool User Guide
User Manual:
Open the PDF directly: View PDF .
Page Count: 82
Download | |
Open PDF In Browser | View PDF |
BLUETOOTH MASS PRODUCTION (MP) TOOL SOFTWARE USER GUIDE 2015MicrochipTechnologyInc. Advance Information page1 BLUETOOTH MASS PRODUCTION (MP) TOOL SOFTWARE USER GUIDE NOTES: Quick Link: - For the Merge Tool for EEPROM Configuration users, please visit MPET For the MP Script file editor and MSF generator users, please visit MPSE For the MPBT usage, please visit MPBT For the Multiple Update Device’s Flash users, please visit MPMF 2015MicrochipTechnologyInc. Advance Information page2 BLUETOOTH MP TOOL SOFTWARE USER GUIDE Table of Contents Table of Contents NOTES: ............................................................................................................................................... 2 Table of Contents .................................................................................................................................. 3 Chapter 1 Preface ....................................................................................................................................... 6 Chapter 2 Overview .................................................................................................................................... 7 2.1 MP Tool Overview ............................................................................................................ 7 2.2 Test Instrument Overview ............................................................................................ 8 2.2.1 Personal Computer (PC) ............................................................................................................. 8 2.2.2 MP Fixtures..................................................................................................................................... 8 2.2.3 RF Instruments (Option) ............................................................................................................. 9 2.2.4 Audio USB Soundcard .............................................................................................................. 10 Chapter 3 Installation ............................................................................................................................... 11 3.1 MP Tool Package ........................................................................................................... 11 3.2 MPBT Environment Setup ........................................................................................... 11 3.3 MPMF Environment Setup........................................................................................... 12 3.4 USB to UART driver ...................................................................................................... 12 Chapter 4 Mass Production EEPROM Tool (MPET) ........................................................................... 15 4.1 MPET Introduction......................................................................................................... 15 4.2 MPET Related File ......................................................................................................... 15 4.3 Generate a Binary File of Full EEPROM .................................................................. 16 4.3.1 Welcome page ............................................................................................................................. 16 4.3.2 Select output file format............................................................................................................ 17 4.3.3 Select base bin file ..................................................................................................................... 18 4.3.4 Add / Remove Merge Files........................................................................................................ 19 4.3.5 Select Output Destination ........................................................................................................ 19 4.3.6 Generate Binary File .................................................................................................................. 20 4.3.7 Complete Info............................................................................................................................... 21 4.4 Generate a Patch File of Part of EEPROM .............................................................. 22 4.4.1 Welcome page ............................................................................................................................. 22 4.4.2 Select output file format............................................................................................................ 23 4.4.3 Select base bin file ..................................................................................................................... 23 4.4.4 Add / Remove Merge Files........................................................................................................ 24 2015MicrochipTechnologyInc. Advance Information page3 4.4.5 Select Output Destination ........................................................................................................ 25 4.4.6 Generate Patch File .................................................................................................................... 26 4.4.7 Calibration Parameter Check ................................................................................................... 27 4.4.8 Complete Info............................................................................................................................... 28 4.5 Error Message ................................................................................................................ 30 4.5.1 Project Name Not Match ........................................................................................................... 30 4.5.2 Device ID Not Match ................................................................................................................... 30 Chapter 5 Mass Production Script Editor (MPSE) ............................................................................... 31 5.1 Introduction ..................................................................................................................... 31 5.2 Graphical User Interface .............................................................................................. 32 5.2.1 Solution Area ............................................................................................................................... 32 5.2.2 Test Item Area .............................................................................................................................. 32 5.2.3 Condition Area ............................................................................................................................. 32 5.2.4 Input / Output Area ..................................................................................................................... 32 5.3 5.4 Test Items Overview ..................................................................................................... 33 Generate MP Script File Step by Step ...................................................................... 34 5.4.1 Select your solution ................................................................................................................... 34 5.4.2 Give your own product name .................................................................................................. 35 5.4.3 Select RF test instrument ......................................................................................................... 35 5.4.4 Choose test items for MP ......................................................................................................... 37 5.4.5 Configure test item’s parameter and limitation .................................................................. 37 5.4.6 Save MP Script File (MSF) ........................................................................................................ 40 5.5 FAQ .................................................................................................................................... 40 Chapter 6 Mass Production Board level test Tool (MPBT) .................................................................. 46 6.1 Introduction ..................................................................................................................... 46 6.2 Testing environment Setup......................................................................................... 46 6.2.1 Single-Site..................................................................................................................................... 46 6.2.2 Dual-Site ........................................................................................................................................ 47 6.2.3 Sound Card connection ............................................................................................................ 48 6.2.4 VICTOIRA Identification ............................................................................................................ 48 6.3 Configuration .................................................................................................................. 49 6.3.1 SYSTEM Page .............................................................................................................................. 49 6.3.2 DEVICE Page ................................................................................................................................ 51 6.3.3 INSTRUMENT Page .................................................................................................................... 52 6.3.4 BT ADDRESS Page ..................................................................................................................... 53 6.3.5 RF METER Page .......................................................................................................................... 57 2015MicrochipTechnologyInc. Advance Information page4 6.3.6 HANDLER Page ........................................................................................................................... 58 6.3.7 MANUFACTURE INFO Page ..................................................................................................... 59 6.3.8 APPLY Page ................................................................................................................................. 60 6.4 Run the Test .................................................................................................................... 61 6.4.1 Put Device Under Test (DUT) in Socket ................................................................................ 61 6.4.2 Single-Site Test Page................................................................................................................. 61 6.4.3 Dual-Site Test Page .................................................................................................................... 63 6.4.4 Dual-Site Test Page for Special Bar Code COM Port ........................................................ 64 6.4.5 Auto-Handler Test Page ............................................................................................................ 65 6.5 Error-Code ....................................................................................................................... 66 6.6 Test Log ........................................................................................................................... 66 6.7 FAQ .................................................................................................................................... 66 Chapter 7 Mass Production Multi Flash (MPMF) ................................................................................. 70 7.1 Introduction ..................................................................................................................... 70 7.2 Graphical User Interface .............................................................................................. 70 7.3 Configuration Dialog..................................................................................................... 71 7.4 Write the Flash with Multiple DUTs........................................................................... 72 7.5 FAQ .................................................................................................................................... 74 Appendix A. Revision History ................................................................................................................. 76 Appendix B. MPBT Communicate with Customer’s tool ..................................................................... 77 2015MicrochipTechnologyInc. Advance Information page5 BLUETOOTH MP TOOL SOFTWARE USER GUIDE Chapter 1 Preface MP Tool is a Windows XP and Win7 compatible software package that supports rapid the production on Microchip’s BT ICs and Modules. MP Tool simplifies the manufactory process by providing a high-level, menu-driven environment that allows the users to quickly and easily develop a Test Script and an automatic MP Testing. This user’s guide will explain how to setup the tool and configure it with an applicable example of creating a MP testing. This document will help the user become familiar with the purpose and functionality of the Microchip’s ICs and Modules and be able to use the MP Tool with ease. 2015MicrochipTechnologyInc. Advance Information page6 BLUETOOTH MP TOOL SOFTWARE USER GUIDE Chapter 2 Overview This chapter provides an overview of the Bluetooth MP Tool and identifies the instrument of MP test environment. Topics covered include: • MP Tool Overview • Test Instrument Overview 2.1 MP Tool Overview The MP Tool consists of four tools include: Mass Production EEPROM Tool (MPET), Mass Production Script Editor (MPSE), Mass Production Board Level Test Tool (MPBT) and Mass Production Multi Flash (MPMF). That can have their own functions and related to others (FIGURE 2-1). This provides greater flexibility and potential in MP process. The following chapter will descript more detail of these tools. FIGURE 2-1 MP Tool Overview 2015MicrochipTechnologyInc. Advance Information page7 2.2 Test Instrument Overview This section will provide MP related instruments overview. 2.2.1 Personal Computer (PC) The Operation System (OS) with Windows XP or 7 (32bit) Must two or more RS232 port interface Must four or more USB port interface NI GPIB-USB-HS is option and depend on RF test item selection 2.2.2 MP Fixtures The MP Fixture is a device to hold the DUT (Device Under Test). Which can be easily fix and remove the DUT. Allow it to be tested by being subjected to controlled electronic test signals. Two kind of fixture: MPBT fixture for MPBT usage (FIGURE 2-2) MPMF fixture for MPMF usage (FIGURE 2-3) FIGURE 2-2 MPBT fixture 2015MicrochipTechnologyInc. Advance Information page8 FIGURE 2-3 MPMF one to four fixture 2.2.3 RF Instruments (Option) MP Tool is support three kind of RF testers: Anritsu MT8852 (FIGURE 2-4) (Visit: Anritsu) Agilent N4010 (FIGURE 2-5) (Visit: Agilent) Lite-Point IQview / IQflex (FIGURE 2-6) (Visit: Lite-Point) FIGURE 2-4 Anritsu MT8852 FIGURE 2-5 Agilent N4010 2015MicrochipTechnologyInc. Advance Information page9 FIGURE 2-6 Lite-Point IQview 2.2.4 Audio USB Soundcard MP Tool only supported one USB soundcard and type is: INTOPIC JAZZ-UB80 USB Sound Card (FIGURE 2-7) (Visit: INTOPIC) FIGURE 2-7 INTOPIC JAZZ-UB80 USB Sound Card 2015MicrochipTechnologyInc. Advance Information page10 BLUETOOTH MP TOOL SOFTWARE USER GUIDE Chapter 3 Installation This chapter provides a setup of MP (Mass Production) test environment, which includes MP fixture, test environment. Topics covered include: • MP Tool package • MPBT environment setup • MPMF environment setup • USB to UART driver 3.1 MP Tool Package Figure 3-1 shows MP related tools and files when you un-zip the MP Tool package. Includes: DOC folder: User Manuals of MP Tools. DS folder: The Default Setting for MPSE used. issc_default_bin folder: Binary file of default EEPROM, used to merge other EEPROM by MPSE. ftd2xx.dll: USB driver. MPBT2: Mass Production Board level Test MPET: Mass Production EEPROM Tool MPSE: Mass Production Script Editor MPMF: Mass Production Multi Flash FIGURE 3-1 Un-Zip MP Tool Package 3.2 MPBT Environment Setup Figure 3-2 illustrates overview of MPBT test environment. The Power supply (+9V) is a source and plugged into the MP Fixture. USB and RS232 are connected between PC and MP fixture for communication. In RF BT test, you can choose extension RF BT testers to instead of GU like Anritsu MT8852, Lite-point IQ View or Agilent N4010. 2015MicrochipTechnologyInc. Advance Information page11 FIGURE 3-2 Overview of MPBT test Environment 3.3 MPMF Environment Setup Figure 3-3 illustrates overview of MPMF test environment. The Power supply (+5V) is a source and plugged into the MPMF 1 to 4 Fixture. USB is connected between PC and MPMF 1 to 4 fixture for communication. FIGURE 3-3 Overview of MPMF test Environment 3.4 USB to UART driver You may get the notice of driver when you first setup MP Fixture with you test PC. That means your test PC doesn’t have MP Fixture driver. Please flow below steps to finish USB to UART driver installation. 2015MicrochipTechnologyInc. Advance Information page12 FIGURE 3-4 Device Manager No Driver Open Device Manager (Figure 3-4) to check the MP Fixture’s driver is installed correct or not. If not, Please download MP Fixture driver from FTDI web site. You can visit http://www.ftdichip.com/Drivers/D2XX.htm and check section Currently Supported D2XX Drivers (Figure 3-5) download it via your IE. FIGURE 3-5 Download FTDI D2xxx Driver Click here download Execute as administrator (Figure 3-6). And flow the Wizard to finish MP Fixture driver installation. After that, you will get new COM port number of MP Fixture on your Device Manager (Figure 3-7). 2015MicrochipTechnologyInc. Advance Information page13 FIGURE 3-6 Open FTDI D2XXX Driver FIGURE 3-7 USB to UART Driver Finish New COM port 2015MicrochipTechnologyInc. Advance Information page14 BLUETOOTH MP TOOL SOFTWARE USER GUIDE Chapter 4 Mass Production EEPROM Tool (MPET) The MPET is EEPROM merge tool. This chapter provides an Introduction and operation of MPET. Topics covered include: • Introduction • Related File • Generate Bin • Generate IPF • Generate IPF for UI • Error Message 4.1 MPET Introduction This tool is used to merge variety customer setting like User Interface (UI), DSP (Digital Signal Processing), 8051 and so on. The end result of using the tool will be a generated Binary File (.bin) or Patch File (.ipf), which can be written into a BT device both IC and Module by MPBT. 4.2 MPET Related File Figure 4-1 illustrates the related files of MPET. The Input (green color) includes default.bin as a base file, UI (User Interface).txt, 8051.txt, DSP (Digital Signal Processor).txt, and others.txt as customize file. After that, Output (orange color) binary file of fully EEPROM or patch file (ipf) of part of EEPROM depend of what kind of operation mode you selected. 2015MicrochipTechnologyInc. Advance Information page15 FIGURE 4-1 MPET Files Relationship 4.3 Generate a Binary File of Full EEPROM 4.3.1 Welcome page FIGURE 4-2 MPET Wizard - Welcome Page 2015MicrochipTechnologyInc. Advance Information page16 4.3.2 Select output file format Select output file format as Default (Full EEPROM, *.bin) tool will output *.bin and *.txt after merge success. Please select “Next” for next step. FIGURE 4-3 MPET Wizard – Output Selection Page 2015MicrochipTechnologyInc. Advance Information page17 4.3.3 Select base bin file Press “Browse” button to open file browser to select base bin file. The bin file description will show below information. And make sure that Solution Name is corrected. Please select “Next” for next step. Load default bin into IPF: Load default bin content into IPF. Please note that once enable (checked) this option while EEPROM data will be overwrite except MP calibrated data. (MPET didn’t support this function in the output bin file mode.) Format Version: Show merge base bin file format version. Solution Name: Show merge base bin file solution name. EEPROM Version: Show merge base bin file EEPROM version. Company Name: file contain company name Project Name: file contain product name. TXT files: Show merge base bin file contain all txt files’ name. IPF files: Show merge base bin file contain all ipf files’ name. FIGURE 4-4 MPET Wizard – Default Binary File Selection Page 2015MicrochipTechnologyInc. Advance Information page18 4.3.4 Add / Remove Merge Files Customized setting in selected BIN This list shows files that included by bin file. If the bin file you selected is default that will be empty. Please select “Next” for next step. Merge List This list show all files that you want to merge with base bin file. Output file will content all in this list box. Press this button to move file from customized bin to merge list Press this button to open file browser dialog to select new file to merge list Press this button to remove merge list selected file. FIGURE 4-5 MPET Wizard – Add/Remove File Page 4.3.5 Select Output Destination Press “Output File” button to open file browser to select output destination. Tool will bring out the default Company Name and Project Name and that can be changed by users. Please select “Next” for next step. 2015MicrochipTechnologyInc. Advance Information page19 FIGURE 4-6 MPET Wizard – Output Destination Page 4.3.6 Generate Binary File Press “Generate” button to generate binary file of full EEPROM. And page shows merged information. Please select “Next” for next step. Merge Type: output file type, bin or ipf. Solution (IC): solution name of base bin file Source File: path of base bin file Output File: path of output file Company Name: company name Product Name: product name Merge Files: merge file list 2015MicrochipTechnologyInc. Advance Information page20 FIGURE 4-7 MPET Wizard – Generate Page 4.3.7 Complete Info Press “Finish” button to close tool. And page shows output file information. Output Path: output file path Output File: output file name of bin and txt. CheckSum: File check sum number. 2015MicrochipTechnologyInc. Advance Information page21 FIGURE 4-8 MPET Wizard – Finish Page 4.4 Generate a Patch File of Part of EEPROM 4.4.1 Welcome page FIGURE 4-9 MPET Wizard - Welcome Page 2015MicrochipTechnologyInc. Advance Information page22 4.4.2 Select output file format Select output file format as UI Patch Only (Customized UI Updates, *.ipf), tool will output *.ipf after merge success. Please select “Next” for next step. FIGURE 4-10 MPET Wizard – Output Selection Page 4.4.3 Select base bin file Press “Browse” button to open file browser to select base bin file. The bin file description will show below information. And make sure that Solution Name is corrected. Please select “Next” for next step. Load default bin into IPF: Load default bin content into IPF. Please note that once enable (checked) this option while EEPROM data will be overwrite except MP calibrated data. Format Version: Show merge base bin file format version. Solution Name: Show merge base bin file solution name. EEPROM Version: Show merge base bin file EEPROM version. Company Name: file contain company name Project Name: file contain product name. TXT files: Show merge base bin file contain all txt files’ name. 2015MicrochipTechnologyInc. Advance Information page23 IPF files: Show merge base bin file contain all ipf files’ name. FIGURE 4-11 MPET Wizard – Default Binary File Selection Page 4.4.4 Add / Remove Merge Files Customized setting in selected BIN This list shows files that included by bin file. If the bin file you selected is default that will be empty. Please select “Next” for next step. Merge List This list show all files that you want to merge with base bin file. Output file will content all in this list box. Press this button to move file from customized bin to merge list Press this button to open file browser dialog to select new file to merge list Press this button to remove merge list selected file. 2015MicrochipTechnologyInc. Advance Information page24 FIGURE 4-12 MPET Wizard – Add/Remove File Page 4.4.5 Select Output Destination Press “Output File” button to open file browser to select output destination. Tool will bring out the default Company Name and Project Name and that can be changed by users. Please select “Next” for next step. 2015MicrochipTechnologyInc. Advance Information page25 FIGURE 4-13 MPET Wizard – Output Destination Page 4.4.6 Generate Patch File Press “Generate” button to generate patch file of part of EEPROM. And page shows merged information. Please select “Next” for next step. Merge Type: output file type, bin or ipf. Solution (IC): solution name of base bin file Output File: path of output file Merge Files: merge file list 2015MicrochipTechnologyInc. Advance Information page26 FIGURE 4-14 MPET Wizard – Generate Page 4.4.7 Calibration Parameter Check This page will appear when UI patch cover with calibration address. If you want to replace it with merge file, please check box. Then press “Next” button to generate output file. 2015MicrochipTechnologyInc. Advance Information page27 FIGURE 4-15 MPET Wizard – Calibration Parameter Check Page 4.4.8 Complete Info Press “Finish” button to close tool. And page shows output file information. Output Path: output file path Output File: output file name of bin and txt. CheckSum: File check sum number. 2015MicrochipTechnologyInc. Advance Information page28 FIGURE 4-16 MPET Wizard – Finish Page 2015MicrochipTechnologyInc. Advance Information page29 4.5 Error Message 4.5.1 Project Name Not Match If you see this dialog as bellow, that means the merge base bin file project information not match merge list files project information. 4.5.2 Device ID Not Match If you see this dialog as bellow, that means the merge base bin file device id not same as merge list files project information. This check only on BT5502 series device. 2015MicrochipTechnologyInc. Advance Information page30 BLUETOOTH MP TOOL SOFTWARE USER GUIDE Chapter 5 Mass Production Script Editor (MPSE) The MPSE is a script editor tool. This chapter provides an Introduction and operation of MPSE. Topics covered include: • Introduction • Graphical User Interface • Test Items Overview • Generate MP Script File (MSF) Step By Step • FAQ 5.1 Introduction This tool is used to create test script file (called .msf) for MPBT. Which file includes MP test items, sequence, conditions and DUT (Device Under Test) information. So that, MPBT knows that what DUT version is, which test items have, and judge the DUT with test conditions. FIGURE 5-1 MPSE Files Relationship 2015MicrochipTechnologyInc. Advance Information page31 5.2 Graphical User Interface This section split up MPSE GUI into four areas for description. Please refer following subsection. 5.2.1 - Solution Area Product Name: Product name (changeable). Solution: List of all Microchip solutions. RFinDevice: The selection of RF test instrument. V-MeterDevice: Power supply and meter 5.2.2 Test Item Area How many test items supported is depend on what solution and RF test Instrument you selected. Each test item was designed at RD stage. You can only change parameters and limitations in Condition Area. And have some default recommend basic test item. Support Test Item (Left): The solution supported test items but not selected yet. MP Test Item (Right): These test items will save into MP Script File (MSF) when you press “SAVE” button. You can modify it depend on your request. ADD --> Add selected item from Support Test Item to MP Test Item. DEL <-- Remove selected item from MP Test Item list to Support Test Item. 5.2.3 Condition Area Selection: List of defined value is select only Editor: You can input parameter, but be careful the valid range. 5.2.4 - Input / Output Area SAVE: Save all of test setting as MP Script File (*.msf) for MPBT uses. LOAD: Load back all of test setting from Script File (*.msf) for modification. EXIT: Exit tool 2015MicrochipTechnologyInc. Advance Information page32 FIGURE 5-2 MPSE GUI Solution Area Test Item Area Condition Area Input / Output Area 5.3 Test Items Overview This Table indicates the most popular used case that may change in the future. If you’re abnormal case doesn’t on the test list. Please contact your FAE for clarification. Table 5-1 Test Item Category SYSTEM ID 10 20 5x 7x 25x 26x 500 2015MicrochipTechnologyInc. Name Initialization Write Flash System verify GPIO test LED test Write EEPROM Description Requirement MP Fixture The Bin File usually from Advance Information page33 550 Patch EEPROM PMU 1000 ~ 1400 15xx RF Calibration 2000 ~ 2070 System power calibration Battery Detect Calibration RF loopback self-test 208x 258x 21xx 26xx 27xx 28xx Audio Test RF Test Peripheral 5.4 7000 ~ 7500 77xx 8xxx 9xxx MPET The Patch file usually from MPET MP Fixture MP Fixture RF Tester Frequency Calibration Tx Power Calibration Tx DEVM check Rx Sensitivity Test Audio test BT test USB soundcard RF Tester NFC, External Flash Generate MP Script File Step by Step 5.4.1 Select your solution You can see all of solution when you drop-down the list. To select the solution that suits your DUT (Device Under Test). 2015MicrochipTechnologyInc. Advance Information page34 FIGURE 5-3 MPSE Solution 5.4.2 Give your own product name After selection of solution, MPSE will bring out the default Production Name You can change it with your own production name. FIGURE 5-4 MPSE Product Name 5.4.3 Select RF test instrument Base on your test environment to select RF test instrument. If your RF instrument doesn’t show on the list, please contact your FAE to get more supporting. The kind of RF test items will different when you changed RF instrument type. FIGURE 5-5 MPSE RF Instrument 2015MicrochipTechnologyInc. Advance Information page35 FIGURE 5-6 MPSE RF GU Test Item FIGURE 5-7 MPSE RF 8852 Test Item 2015MicrochipTechnologyInc. Advance Information page36 5.4.4 Choose test items for MP Move the mouse cursor to test item in Support Test Item and left click. And then Press “ADD” button to add item into MP Test Item. Repeat it until the items is enough for your tests. Otherwise you can remove items you don’t want in MP Test Item with “DEL” button. FIGURE 5-8 MPSE Add Test Item 5.4.5 Configure test item’s parameter and limitation Move the mouse cursor to test item in MP Test Item and left click. The item’s parameters and limitation will show on Condition Area. That has default setting, you can change it. FIGURE 5-9 MPSE Test Condition 2015MicrochipTechnologyInc. Advance Information page37 The MPSE has four type of editor: Select type The option values are defined at RD stage. You just choose a fit one. FIGURE 5-10 MPSE Editor Type - Select Edit type In this type, you can key value in editor. And tool will check validation after “SAVE” button clicked. FIGURE 5-11 MPSE Editor Type - Edit 2015MicrochipTechnologyInc. Advance Information page38 File type In this type, you need input specific file and key-in checksum. Table 5-2 MPSE File Type Extension File Name HEX BIN IPF ITEMs 20,9850,9870 500 550 Comment Write Flash Write EEPROM Patch EEPROM FIGURE 5-12 MPSE Editor Type - File GPIO type This type is for Item 250 GPIO Check. Refer following comment: OUTPUT/ INPUT: GPIO PIN selection. CONNECT: test type Open/Short ADD: add one test case in the list DEL: delete selected test case in list DEFAULT: Load back the default test cases list CLEAR: clear test cases list 2015MicrochipTechnologyInc. Advance Information page39 FIGURE 5-13 MPSE Editor Type - GPIO 5.4.6 Save MP Script File (MSF) Click “SAVE” button to save configuration as MSF. And you can click “LOAD” button when you want to load back MSF. Click “EXIT” to close the tool. 5.5 FAQ Q1 Why is there a warning message when we remove default test item from MP Test Item list? How can I do? A1 Because those test items are Microchip recommend that the basic test items. This message just want user double check match your request。Click (Y) to remove test Item. Otherwise click (N) to keep this test item. 2015MicrochipTechnologyInc. Advance Information page40 Q2 Why is there an error message when I save file? A2 Please check Item 20 file path & checksum. File path can’t use default file. User need select Flash.HEX file. Checksum can’t use default value. User need key-in Flash.HEX checksum. Q3 Why is there an error message when I save file﹖ A3 Please confirm the correct of the Flash.hex file. The Flash.hex file didn’t match Solution name 2015MicrochipTechnologyInc. Advance Information page41 Q4 Why is there an error message when I save file? A4 Please check Item 500 file path & checksum. File path can’t use default file. User need select EEPROM.BIN file. Checksum can’t use default value. User need key-in EEPROM.BIN checksum. Q5 Why is there an error message when I save file? A5 Please confirm the correct of the EEPROM.BIN file. The EEPROM.BIN file didn’t match Solution name. 2015MicrochipTechnologyInc. Advance Information page42 Q6 Why is there an error message when I save file? A6 Please select any RF test item into MP Test Item list when you select MT8852B instrument. 2015MicrochipTechnologyInc. Advance Information page43 Q7 Why is there an error message when I save file? A7 Please check Item 2180 Power level 0, 1, 2, EDR, BDR values. Please find High power : 1 is EDR Max Power and Low power: -1 is power level 2. EDR Power minus Power level2 to less than 7 and more than 3 The difference between each of power level need had 3 ~ 7 2015MicrochipTechnologyInc. Advance Information page44 Q8 Why is there an error message when I load file? A8 The *.msf file had been modified without use the MPSE tool. Please create new *.msf file. Q9 Why I got this warring message? A9 When you remove the recommend test item from Microchip tool will show warring message. 2015MicrochipTechnologyInc. Advance Information page45 BLUETOOTH MP TOOL SOFTWARE USER GUIDE Chapter 6 Mass Production Board level test Tool (MPBT) The MPBT is major of MP tool. That executes testing and judges DUT by test result. This chapter provides an Introduction and operation of MPBT. Topics covered include: • Introduction • Testing Environment Setup • Configuration • Run the Test • FAQ 6.1 Introduction This tool is used test DUT with MP Fixture. It will follow the script file (.msf) automatically testing and calibration. After that, it will show result of DUT and save testing log. FIGURE 6-1 Relationship of MPBT 6.2 Testing environment Setup 6.2.1 Single-Site 2015MicrochipTechnologyInc. Advance Information page46 FIGURE 6-2 RF Test with GU at Single-Site FIGURE 6-3 RF Test with RF Tester at Single-Site 6.2.2 Dual-Site FIGURE 6-4 RF Test with GU at Dual-Site 2015MicrochipTechnologyInc. Advance Information page47 FIGURE 6-5 RF Test with RF Tester at Dual-Site 6.2.3 Sound Card connection FIGURE 6-6 Connection audio cable between Soundcard and AC102013 6.2.4 VICTOIRA Identification In Dual-Site test environment, you need configure the switch (SW) for identification of VICTORIA. Please refer Table 6-1. 2015MicrochipTechnologyInc. Advance Information page48 FIGURE 6-7 VICTORIA Overview Side SW Table 6-1 VICTORIA Identification Site Number Side Switch 1 2 1 (default) ON ON 2 OFF ON 3 ON OFF 4 OFF OFF More details for VICTORIA (PN: AC102013), please refer Bluetooth MP Board AC102013 User Guide you find it from Microchip web site. 6.3 Configuration The MPBT configuration is divided into several tabbed pages. Each page includes a parameter summary which allows the user to keep track of the changes made. 6.3.1 SYSTEM Page TEST SCRIPT LOAD FILE button: Input .msf file, after load file show other pages File Path: file location of msf Product Name: name of product Device Name: name of DUT 2015MicrochipTechnologyInc. Advance Information page49 SETTING Save Output Log: Enable MP testing log BROWSE button: Select log file location Enable Dump EEPROM When The Test Is Successful: Dump EEPROM table when test result is Pass. Enable save individual file for each DUT: Save every individual test log file into Pass folder or Fail folder when test finish. Enable Pass Alarm: Alarm when test result is Pass Enable Failure Alarm: Alarm when test result is Fail. S/N Begin of Serial Number ACCESSORY SN Product Serial Number (Maximum is 10 numbers) LOCAL DEVICE NAME When .msf has ITEM 595 Write Local Device Name, It will enable Customer Prefix: Set Device Name Start Of SN: When enable Device Name with SN, it will enable PASSWORD CHANGE button: Changes the password of LOAD FILE STATUS of configurations FIGURE 6-8 SYSTEM Configure Page 2015MicrochipTechnologyInc. Advance Information page50 6.3.2 DEVICE Page Site Number: Select platform number, 1: Single-Site, 2: Dual-Site Shielding Box: NONE_SBOX: No uses GIT_SBOX: Use kind of GIT_SBOX shielding box. Global Instrument Tech SITE 1 Access Port COM Port: Set DUT’s UART port number Baud Rate: Set DUT’s UART baud rate Information: Set SITE1 information, this data will save in Log. Box Port COM Port: Set shielding box UART port number Baud Rate: Set shielding box UART baud rate GIT_BOX baud rate is 9600 SITE 2 is as above SITE1. FIGURE 6-9 DEVICE Configure Page 2015MicrochipTechnologyInc. Advance Information page51 6.3.3 INSTRUMENT Page VOLTAGE-METER: Only support Microchip BT MP Test Board AC102013. CURRENT-METER: Only support Microchip BT MP Test Board AC102013. LASER-METER: No Use. FIGURE 6-10 INSTRUMENT Configure Page 2015MicrochipTechnologyInc. Advance Information page52 6.3.4 BT ADDRESS Page BT ADDRESS: MPBT supports six type of DUT’s BT address writing. Please refer following description NO WRITE: No write (no change) DUT BD Address after testing. Confirm BT Address: This option used to verifies DUT’s existing BT Address connection. And it needs Barcode Reader. About Barcode configuration, please refer BAR-CODE type. RANGE: Start: Beginning of BT Address Count: Amount of BT Address Current: Current use BT Address BAR-CODE: Ask Device Ready Dialog: When option is enabled (checked) MPBT will appear a dialog to ask operator to start the test. Therefore, operator has time to input DUT in fixture when barcode label is hard to read. Enable Check BT Address Range: User can define the “Check BT Range Start” and “Check BT Range Stop” range. After run finish, MP will check input Barcode need in the Range. The Site1 range and Site2 range can’t repeat region. 2015MicrochipTechnologyInc. Advance Information page53 *Enable Special Bar Code COM Port: User can define the “Bar Code COM Port” and “Bar Code Baud Rate”. MP will inquire this com port data. If MP get data (BT Address) from COM port, MP will used this data and start test flow. *Note: 1. This function just for special bar code scanner.(SUNITEC) 2. This function only available in the dual mode. Search Type: The parser for BT address in Barcode label. INDEX: BT Address start point (index origin = 0) KEYWORD: Keyword of BT Address in Barcode label Add-on Prefix: Input fixed BT Address, it will merged with read data of Barcode label (maximum is 12 numbers) Ex: Add-on Prefix 001167, Barcode read 123456 => 001167123456 Address Has Delimiter: Barcode and Add-on Prefix has delimiter symbol. FIX ADDR: BT Address: Input fixed BT Address. 2015MicrochipTechnologyInc. Advance Information page54 FROM TAG: Read BT Address from NFC Tag. Note that, this type needs NFC Reader. MPBT support NFC Reader: ACS ACR 122 (visit: ACS) FROM HANDLER: If Auto-Handler can provide a BT Address, you can choose this type. That also needs Barcode parser. (Please refer BAR-CODE type) NFC READER Detect Timeout: limited detect tag. (sec) Data Area Size (DAS): Set NFC tag’s size. When .msf include ITEM 9800 it will enable SITE1: Select model of NFC reader SITE2: As above SITE1 2015MicrochipTechnologyInc. Advance Information page55 FIGURE 6-11 BT ADDRESS Configure Page 2015MicrochipTechnologyInc. Advance Information page56 6.3.5 RF METER Page RF METER: RF instrument setting MT8852 RS232: MT8852 COM port and Baud rate setting RF CABLE LOSS: SITE 1 and SITE2 RF cable loss RF Frequency Calibration: Channel of Frequency calibration. (Enable depend on MSF setting) RF Tx Power Verify: Channel of Tx power. (Enable depend on MSF setting) RF Rx Sensitivity: Channel of Rx sensitivity. (Enable depend on MSF setting) FIGURE 6-12 RF METER Configure Page 2015MicrochipTechnologyInc. Advance Information page57 6.3.6 HANDLER Page MODE: Select DUT exchange type. MPBT support three modes. Please refer Table 6-2 Auto-Handler Table 6-2 Auto-Handler Name and Interface Name MANUAL HT3000 GIT_ATS Interface N/A RS232 .ini file Parameter N/A COM port Ini Folder Note Operator changed by hand Refer Appendix B more detail Handler No: Set Handler number. This number will save in Log. COM Port: UART COM port number Baudrate: UART baud rate *Ini Folder: .ini files location. (Barcode.ini, EOT.ini, SOT.ini, Status.ini) *Note: After APPLY process will auto create SITE1 folder to store these .ini files. (SITE2 folder for second site if site number is 2. Refers 6.3.2 DEVICE Page) ASSIGN BIN LIST: BIN table. Table change flow: 1. Select Test Item 2. Select BIN number 3. Click MODIFY button to save new setting on list FIGURE 6-13 HANDLER Configure Page 2015MicrochipTechnologyInc. Advance Information page58 6.3.7 MANUFACTURE INFO Page INFORMATION: Save the list data in Log’s title Ex: WorkingOrder:WO123 Load button: Input Manufacture Information text file Text Format: [Name], [Data] EX: WorkingOrder, WO123 ManufactureOrder, MO456 Clear button: Clear list FIGURE 6-14 MANUFACTURE INFO Configure Page 2015MicrochipTechnologyInc. Advance Information page59 6.3.8 APPLY Page 1. List of test item and test environment check result 2. OPERATOR: Input Operator’s ID, This ID will save in Log 3. APPLY button: Apply all of setting. 4. Next Time Auto-APPLY: auto apply last setting when this option enabled. Click TEST Page start test FIGURE 6-15 APPLY Configure Page 1 4 2 3 TEST page will appeared next to Configure page when all setting is OK. 2015MicrochipTechnologyInc. Advance Information page60 FIGURE 6-16 TEST Page 6.4 Run the Test 6.4.1 Put Device Under Test (DUT) in Socket Put DUT in MP fixture’s socket before you run the MP testing. FIGURE 6-17 DUT Into Socket 6.4.2 Single-Site Test Page RUN button: Start test button Testing information FIGURE 6-18 Single-Site Testing Information Project Name Statistics Device Name Written BT Address Result (REMAIN enabled when BT ADDRERSS type is RANGE) Test items and status. 2015MicrochipTechnologyInc. Advance Information page61 Bar-Code input area, when BD Address type is BAR-CODE. FIGURE 6-18 Single-Site TEST Page 2015MicrochipTechnologyInc. Advance Information page62 6.4.3 Dual-Site Test Page SITE1: RUN: Start test. SITE1 test result and written BT Address. SITE2:As above SITE1 Information FIGURE 6-20 Dual-Site Testing Information Project Name Statistics Device Name (REMAIN enabled when BT ADDRERSS type is RANGE) Bar-Code input area, when BD Address is BAR-CODE mode. FIGURE 6-21 Dual-Site Test Page 2015MicrochipTechnologyInc. Advance Information page63 6.4.4 Dual-Site Test Page for Special Bar Code COM Port Key-in “START”. MP start to inquire bar code data. SITE1: bar code scanner input BT Address to start test. SITE1 test result and written BT Address. SITE2: As above SITE1. Information Key-in “STOP”. MP stop to inquire bar code data. FIGURE 6-22 Dual-Site Testing Information Project Name Statistics Device Name (REMAIN enabled when BT ADDRERSS type is RANGE) FIGURE 6-23 Dual-Site Test Page 2015MicrochipTechnologyInc. Advance Information page64 6.4.5 Auto-Handler Test Page SITE1: Test result and Information Result statistic includes PASS, FAIL and TOTAL. Binning information the blue color means last one SITE2: As above SITE1 Test information FIGURE 6-24 Auto-Handler Testing Information Project Name Statistics Device Name FIGURE 6-25 Auto Handler Test Page 2015MicrochipTechnologyInc. Advance Information page65 6.5 Error-Code When DUT occurs some error at testing process, MPBT will show error-code on test information area. The Error-Code consists of Main Error Code and Sub Error Code. Main Error Code is equal the test item number. Sub Error Code represents that what kind of error type. For example, Error code 1500-00. Table 6-3 Error-Code Description Sample Main Sub Error Code 1500 00 Description Battery Detect Calibration test item Calibration value Out of limitation Please refer Mass Production Test Tool release note.pdf section MPBT Error Code for more details FIGURE 6-26 Error-Code 6.6 Test Log File name consist of ProjectName-YYMMDDHHMMSS.csv. You can change the file path at SYSTEM configure page. The log has all of test data, like test result, error-code, testing time, measured data and pass condition. And append each test item at left site. The log’s order is depend on MP script file (MSF). Table 6-25 Test Log sample BTADDRESS DUT NO1 DUT NO2 DUT NO3 … 6.7 RESULT PASS FAIL PASS … ERRORCODE 0 1500-00 0 … ITEM 500 500 500 … VALUE xx xx xx … ITEM 1500 1500 1500 … VALUE xx xx xx … ITEM 2080 2080 2080 … VALUE xx xx xx … … … … … … FAQ Q1 How to change Operator’s ID after APPLY? A1 On TEST page push F8 Key, and shows dialog of operator ID 2015MicrochipTechnologyInc. Advance Information page66 Q2 What can I do if show “Please First Input Tester Id” on APPLY page? A2 Please input the Operator ID before push APPLY button Q3 It shows “connect VICTORIA (Site1/Site2) failed” on APPLY page, How can I do? A3 Please check the SITE1 (SITE2) fixture (VICTORIA/VENUS) is power on, connected and switch (switch please refer 3. Control Board Setting) Q4 What mean is this dialog on APPLY? A4 Please makes sure all of instrument is ready before you press APPLY button. Ex: Device, Audio Card, MT8852 and so on. Q5 When I use BAR-CODE mode to input BT Address, I already scan the barcode of BT Address but it doesn’t run test? A5 Because MPBT support multi-site test, so you need to notice MPBT which Site is on 2015MicrochipTechnologyInc. Advance Information page67 test by scan barcode of SITE1 or SITE2 again. Q6 My barcode length is small than 12 bytes, How to solve it? A6 You can use the Add-on Prefix to full the BD Address to 12 bytes. Ex: Barcode Address is “7808DF0”. You can input “00116” as Add-on Prefix, finally MPBT will merge both to “001167808DF0”. Q7 How to know Control board (VICTORIA) is ready? A7 Have two versions: VICTORIA 2.1: You can see the Device Manager -> USB bus, If Control Board is ready, it will show name of ISSC Vendor Flash USB Driver. If you have two or more Control Board and you can see two names of ISSC Vendor Flash USB Driver, and so on. VICTORIA 2.15/2.5: Device Manager -> COM and LPT, If Control Board is ready, it will shows USB Serial Port(COMx). (x means COM’s number). Just like USB bus, if you have two or more Control Board you can see two names of COMx and so on. 2015MicrochipTechnologyInc. Advance Information page68 Q8 What is means of error code? A8 Error Description Code 0000-10 The input BD Address is error 0000-50 The test item does not support 0000-51 Initial parameter error 0000-70 Create Log error 0000-71 Open Log error ****-98 Load test parameters error(*.msf) More error code you can refer Release Note of each MP tools released: ISSC Mass Production Test Tool_release_note.pdf Q9 How many supported Test item MPBT have? A9 Please refers Release Note of each MP tools released. ISSC Mass Production Test Tool_release_note.pdf 2015MicrochipTechnologyInc. Advance Information page69 BLUETOOTH MP TOOL SOFTWARE USER GUIDE Chapter 7 Mass Production Multi Flash (MPMF) The MPMF is a write multiple flash tool. This chapter provides an Introduction and operation of MPBT. Topics covered include: • Introduction • Graphical User Interface • Configuration • Write the flash with multiple DUT • FAQ 7.1 Introduction This tool is used to write flash of multiple DUTs, and maximum to 8 DUTs at once. Duo to write a flash take a lot of time, this is cost efficiency way to update the flash. FIGURE 7-1 Relationship of MPMF 7.2 Graphical User Interface Product Name: Product’s name, changeable by MPSE. Checksum (FLASH): Checksum of FLASH file Checksum (EEPROM): Checksum of bin file PASS: Counter of Pass 2015MicrochipTechnologyInc. Advance Information page70 FAIL: Counter of Fail Total: Counter of total CONFIGURE button: Open configuration dialog RUN: Execute all of device testing DEVICE 0~7 COM Port: Show Device’s COM Port Result: Show testing result run button: Single run FIGURE 7-2 MPMF Main Page 7.3 Configuration Dialog Browse button: Select path of MP Script File Write Mode: MPMF supports two modes IBDK and BOOT to write the flash. Confirm the device mode before your running. Support Item Indicator: This table indicates that MPMF supported test item from MP Script File (MSF). DEVICE 0~7 Check: Enable (checked) select what Device you want to test Port: Configure Device’s COM Port Log Directory: Enable save log when test finish 2015MicrochipTechnologyInc. Advance Information page71 Browse button: Select path of Log file Enable Failed Alarm: Alarm when test fail Save: Save current configuration into .ini file Load: Load back configuration from .ini file Apply button: Apply all of settings and leave configuration dialog. Cancel button: Cancel the settings and leave configuration dialog. FIGURE 7-3 MPMF Configure Page 7.4 Write the Flash with Multiple DUTs After configuration, please flow below step to write flash 1. Put DUTs into socket of MPMF fixture 2. Power on by switch 3. Press MPMF RUN button to write flash 4. Wait test result and change DUTs 2015MicrochipTechnologyInc. Advance Information page72 FIGURE 7-4 MPMF 1 to 4 Fixture Power Switch DUT 4 DUT 2 DUT 3 DUT 1 FIGURE 7-5 MPMF Main Page Write Flash 2015MicrochipTechnologyInc. Advance Information page73 7.5 FAQ Q1 Is MPMF support all of MPBT test item? A1 No. Only support Write Flash and Write EEPROM related item. Please refer Support Item Indicator at Configuration Dialog. Q2 How to create .msf file? A2 MPSE can creates .msf Q3 How to solve this problem? A3 The .msf does not have any item of MPMP supported. Please confirm your test items with MPSE Q4 How to solve “Not be select any Device”? A4 You have no select any device (Device 0~7) on Configuration dialog Q5 How to solve “Use con port the same” A5 The selected test Devices has same COM Port number. Please change COM Port. 2015MicrochipTechnologyInc. Advance Information page74 Q6 What is “Whether the EEPROM model is the 24C08”? A6 This message is notice. Please double confirm your DUT’s EEPROM size is 1k bytes (24C08). Q6 How to solve “EEPROM model not support 24C32”? A6 MPMF does not support write EEPROM size over 1k bytes at BOOT mode 2015MicrochipTechnologyInc. Advance Information page75 BLUETOOTH MP TOOL SOFTWARE USER’S GUIDE Appendix A. Revision History REVISION HISTORY Revision 3 (May, 2016) Add Appendix B MPBT communicate with customer’ tool for automatically testing. Add Auto-Apply feature at MPBT APPLY page section. Revision 2 (Oct, 2015) Added the Quick Link page at cover to link each sub MP tool quickly. Renamed the Figure of MP Tool overview Revision 1 (Aug, 2015) Initial Release of this document 2015MicrochipTechnologyInc. Advance Information page76 BLUETOOTH MP TOOL SOFTWARE USER GUIDE Appendix B. MPBT Communicate with Customer’s tool PREFACE The GIT_ATS (Global Instrument Tech – Auto Test Station) is one of MPBT communication types to communicate with outside tool (such as customer’s testing tool and robot handler). And then, become an automatic testing system. When this feature enable, MPBT will be entering standby mode and wait customer’s tool instruction through the .ini file. Once testing finish, MPBT log testing data and notice customer’ tool through .ini as well. Please refer following sections for more detail description. 2015MicrochipTechnologyInc. Advance Information page77 INI FILEs EOT.ini: (End of Test) Create by MPBT after Status.ini setting done. No any content. Status.ini: Create by MPBT when testing finish to save the testing results. Content: [Status] TestResult=FAIL # test result BIN=1 SN=1 YieldRate=90 YieldPass=9 YieldTotal=10 # BIN number, which Tray DUT in # Serial Number the same with Barcode.ini # Yield Rate = YieldPass / YieldTotal * 100 # amount of PASS # amount of Tests ErrorMessage=Error ErrorCode=0000 # Error Message when TestResult FAIL # Error Code when TestResult FAIL TestTime=3 # Testing Time (sec) LogFilePath =d:\Log\xxx.csv # log path and file name. SOT.ini: (Start of Test) Create by Customer’s Tool after Barcode.ini setting done. No any content. Barcode.ini: Create by Customer’s Tool to set testing data (OP ID, BT ADDR…) to instruct MPBT to start tests. [Data] *MAC=001167123456 # BT Address will be update by this when test pass OP_ID=10305001 # Operator’s ID SN=1 # Serial Number **DEVICE_NAME=name # Device Name will be update by this when test pass 2015MicrochipTechnologyInc. Advance Information page78 *Note: To send MAC address to MPBT via GIT_ATS protocol. You also need to configure MPBT BT ADDRESS Page -> FROM HANDLER. Please refers below screenshot **Note: To send Device Name to MPBT via GIT_ATS protocol. You also need to select Test Item “595 Write DUT local device name” and configure as Resource From -> CUSTOMER_TOOL at MPSE. Please refers below screenshot 2015MicrochipTechnologyInc. Advance Information page79 TIMING/ROLE DIAGRAM MPBT Aspect: MPBT EOT.ini Create To notice Customer’ Tool that MPBT is at Test End state Wait SOT created Customer Tool Behavior Status.ini Customer Tool Customer Tool Create SOT to notice MPBT Barcode.ini was set finish Delete To notice Customer Tool, MPBT was get Start instruction SOT was Del? Customer Tool deletes SOT, to notice MPBT, DUT was settled Read Barcode.ini Run Tests Barcode.i ni Create Create Change Next Device 2015MicrochipTechnologyInc. Advance Information page80 Customer’s Tool Aspect: MPBT Customer’s Tool Barcode.ini SOT.ini Wait EOT created MPBT Behavior MPBT creates EOT to tell at Test End State Create Create Wait EOT deleted Customer Tool Create SOT to notice MPBT Barcode.ini was set finish Set DUT into JIG Wait EOT created Delete Customer Tool deletes SOT, to notice MPBT, DUT was settled Read Status.ini Change Next Device 2015MicrochipTechnologyInc. Advance Information page81 WorldwideSalesandService AMERICAS CorporateOffice 2355WestChandlerBlvd. Chandler,AZ85224-6199 Tel:480-792-7200 Fax:480-792-7277 TechnicalSupport:http://w ww.microchip.com/support WebAddress: www.microchip.com Atlanta Duluth,GA Tel:678-957-9614 Fax:678-957-1455 Austin,TX Tel:512-257-3370 BostonWestboroug h,MATel:774-7600087 Fax:774-760-0088 Chicago Itasca,IL Tel:630-285-0071 Fax:630-285-0075 ClevelandIndepen dence,OHTel:216447-0464 Fax:216-447-0643 Dallas Addison,TX Tel:972-818-7423 Fax:972-818-2924 Detroit Novi,MI Tel:248-848-4000 Houston,TX Tel:281-894-5983 IndianapolisNobl esville,INTel:317773-8323 Fax:317-773-5453 LosAngelesMission Viejo,CATel:949462-9523 Fax:949-462-9608 NewYork,NY Tel:631-435-6000 SanJose,CA Tel:408-735-9110 Canada-Toronto Tel:905-673-0699 Fax:905-673-6509 ASIA/PACIFIC AsiaPacificOfficeSuites3 70714,37thFloorTower6,TheG atewayHarbourCity,Kowlo onHongKong Tel:852-2943-5100 Fax:852-2401-3431 Australia-Sydney Tel:61-2-9868-6733 Fax:61-2-9868-6755 China-Beijing Tel:86-10-8569-7000 Fax:86-10-8528-2104 China-Chengdu Tel:86-28-8665-5511 Fax:86-28-8665-7889 China-Chongqing Tel:86-23-8980-9588 Fax:86-23-8980-9500 China-Hangzhou Tel:86-571-8792-8115 Fax:86-571-8792-8116 China-HongKongSAR Tel:852-2943-5100 Fax:852-2401-3431 China-Nanjing Tel:86-25-8473-2460 Fax:86-25-8473-2470 China-Qingdao Tel:86-532-8502-7355 Fax:86-532-8502-7205 China-Shanghai Tel:86-21-5407-5533 Fax:86-21-5407-5066 China-Shenyang Tel:86-24-2334-2829 Fax:86-24-2334-2393 China-Shenzhen Tel:86-755-8864-2200 Fax:86-755-8203-1760 China-Wuhan Tel:86-27-5980-5300 Fax:86-27-5980-5118 China-Xian Tel:86-29-8833-7252 Fax:86-29-8833-7256 ASIA/PACIFIC India-Bangalore Tel:91-80-3090-4444 Fax:91-80-3090-4123 India-NewDelhi Tel:91-11-4160-8631 Fax:91-11-4160-8632 India-Pune Tel:91-20-3019-1500 Japan-Osaka Tel:81-6-6152-7160 Fax:81-6-6152-9310 Japan-Tokyo Tel:81-3-6880-3770 Fax:81-3-6880-3771 Korea-Daegu Tel:82-53-744-4301 Fax:82-53-744-4302 Korea-Seoul Tel:82-2-554-7200 Fax:82-2-558-5932or 82-2-558-5934 EUROPE Austria-Wels Tel:43-7242-2244-39 Fax:43-7242-2244-393 Denmark-Copenhagen Tel:45-4450-2828 Fax:45-4485-2829 France-Paris Tel:33-1-69-53-63-20 Fax:33-1-69-30-90-79 Germany-Dusseldorf Tel:49-2129-3766400 Germany-Munich Tel:49-89-627-144-0 Fax:49-89-627-144-44 Germany-Pforzheim Tel:49-7231-424750 Italy-Milan Tel:39-0331-742611 Fax:39-0331-466781 Italy-Venice Tel:39-049-7625286 Malaysia-KualaLumpur Tel:60-3-6201-9857 Fax:60-3-6201-9859 Netherlands-Drunen Tel:31-416-690399 Fax:31-416-690340 Malaysia-Penang Tel:60-4-227-8870 Fax:60-4-227-4068 Poland-Warsaw Tel:48-22-3325737 Philippines-Manila Tel:63-2-634-9065 Fax:63-2-634-9069 Singapore Tel:65-6334-8870 Fax:65-6334-8850 Taiwan-HsinChu Tel:886-3-5778-366 Fax:886-3-5770-955 Spain-Madrid Tel:34-91-708-08-90 Fax:34-91-708-08-91 Sweden-Stockholm Tel:46-8-5090-4654 UK-Wokingham Tel:44-118-921-5800 Fax:44-118-921-5820 Taiwan-Kaohsiung Tel:886-7-213-7830 Taiwan-Taipei Tel:886-2-2508-8600 Fax:886-2-2508-0102 Thailand-Bangkok Tel:66-2-694-1351 Fax:66-2-694-1350 China-Xiamen Tel:86-592-2388138 Fax:86-592-2388130 China-Zhuhai Tel:86-756-3210040 Fax:86-756-3210049 2015MicrochipTechnologyInc. Advance Information DS50002279A-page82
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 82 Language : zh-TW Tagged PDF : Yes Title : RN4020 Bluetooth Low Energy Module Data Sheet Author : Microchip Technology Inc. Subject : RN4020 Bluetooth Low Energy Module Data Sheet Keywords : RN4020 Bluetooth Low Energy Module Data Sheet, RN4020, DS50002279A, DS50002279, 50002279A, 50002279 Creator : Microsoft® Word 2010 Create Date : 2017:05:25 16:47:45+08:00 Modify Date : 2017:05:25 16:47:45+08:00 Producer : Microsoft® Word 2010EXIF Metadata provided by EXIF.tools