54 7891 02E Bogen ENHANCER ESYSx(M) Systems Wiring Diagrams ENHANCE ESYSdia
User Manual: Bogen ENHANCER ESYSx(M) Systems Wiring Diagrams Bogen Microphones s - Telecomuserguides.com
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
SYSTEMS WIRING DIAGRAMS ESYS1(M) MAX BATT CHG. The (BCWHT) Wireless Handheld Microphone operates solely on channel "B". The BCWHT Mic is available with the ESYS “M” package. MI BCWBT ENHANCER IR Receiver BCWHT Wireless Handheld MIC BCIRS Unit 1 FRONT VIEW BCIRS Unit 2 The Enhancer Body-Pack Transmitter (BCWBT) output level is controlled by the body-pack's volume control. REAR VIEW Gold Seal Series Amplifier ACOUSTIC EQ O U T Volume Control for Enhancer The Enhancer Receiver's mixed output level (for each channel) is controlled by the "A" and "B" Volume Controls. GOLD SEAL SERIES MIC 1 62.5 MIC 2 MIC 3 MIC 4 MIC 5/TEL Fig. A (see NOTE 1) FEEDBACK CONTROL MIC 6/AUX 1 125 250 500 1K 2K 4K 8K 12K FRONT VIEW 16K + 12 AUX 2 + 12 MASTER POWER 9 4 4 6 4 6 4 6 4 6 4 6 4 6 ACOUSTIC EQ 6 6 3 2 8 2 8 2 8 2 8 2 8 2 8 2 8 0 O U T 0 3 0 10 0 10 0 10 0 10 0 10 0 10 FRONT VIEW Recessed Volume Control. BLACK 125 WIRE COLOR BLACK BROWN RED ORANGE YELLOW GREEN BLUE VIOLET GREY WHITE IN 315 500 800 1.2K 2K 3.1K 5K 8 OUT 8K AUDIO ENHANCEMENT OUT Master Volume Control for System Output BROWN REAR VIEW + REAR VIEW ESYS1 NOTES: + + 1. When switch is set to "FEEDBACK CONTROL," the amplifier can be used to improve "Max Volume before Feedback". (see Fig. A) 25V COMMON 4W 2W 1W 1/2W 1/4W 1/8W ---------------------- 200 CONTOUR LINK switch set to “IN” + (see NOTE 2) 10 IN 12 - 12 - 25V Fig. B 0 2 FEEDBACK CONTROL 6 + ground CUT 10 6 9 Both LINK Connection jumpers should remain in place S86T725PG8WVR Ceiling Speakers (4) 0 4 2. Cut/Remove bare wire tips off of unused speaker leads on all speakers. (see Fig. B) 3. If necessary, individual speaker output levels can be adjusted by the Speaker’s Recessed Volume Control or by Power Taps. (see Fig. C) Fig. C (see NOTE 3) 25V 25V 25V 25V ESYS2(M) MAX BATT CHG. The (BCWHT) Wireless Handheld Microphone operates solely on channel "B". The BCWHT Mic is available with the ESYS “M” package. MI ENHANCER IR Receiver BCWBT BCIRS Unit 1 FRONT VIEW BCWHT Wireless Handheld MIC BCIRS Unit 2 The Enhancer Body-Pack Transmitter (BCWBT) output level is controlled by the body-pack's volume control. REAR VIEW Gold Seal Series Amplifier ACOUSTIC EQ O U T Volume Control for Enhancer The Enhancer Receiver's mixed output level (for each channel) is controlled by the "A" and "B" Volume Controls. 62.5 MIC 2 MIC 3 MIC 4 MIC 5/TEL MIC 6/AUX 1 (see NOTE 1) FEEDBACK CONTROL GOLD SEAL SERIES MIC 1 Fig. A 125 250 500 1K 2K 4K 8K 12K 16K + 12 AUX 2 FRONT VIEW + 12 MASTER POWER 9 4 4 6 4 6 4 6 4 6 4 6 4 6 ACOUSTIC EQ 6 6 3 2 8 2 8 2 8 2 8 2 8 2 8 2 8 0 0 3 0 10 0 10 0 10 0 10 0 10 0 10 0 10 O U T 6 0 10 2 FEEDBACK CONTROL 6 4 8 9 12 - 12 125 200 315 500 800 1.2K 2K 3.1K 5K 8K IN FG15W Surface-Mount Speakers (4) IN OUT AUDIO ENHANCEMENT CONTOUR OUT Both LINK Connection jumpers should remain in place Master Volume Control for System Output FRONT VIEW + 8 ground LINK switch set to “IN” REAR VIEW REAR VIEW ESYS2 NOTES: 8 1. When switch is set to "FEEDBACK CONTROL," the amplifier can be used to improve "Max Volume before Feedback". (see Fig. A) 7.5W 1W 2W 1W + 15W 7.5W 4W + + 2W 1W 8 8 Series Connected 4W 2W 1W 8 8 (see NOTE 2) 8 7.5W LINE + 8 4W 8 INPUT 15W 7.5W LINE + 8 8 + 2W 1W LINE 4W INPUT 15W 7.5W 8 + 8 + LINE 15W Fig. B INPUT 2W INPUT 4W 8 FG15W set to LINE 15W 8 8 Series Connected 2. On each FG15W speaker, turn the Tap Selector setting to 8 . (see Fig. B) SYSTEMS WIRING DIAGRAMS ESYS1(M) MAX BATT CHG. The (BCWHT) Wireless Handheld Microphone operates solely on channel "B". The BCWHT Mic is available with the ESYS “M” package. MI BCWBT ENHANCER IR Receiver BCWHT Wireless Handheld MIC BCIRS Unit 1 FRONT VIEW BCIRS Unit 2 The Enhancer Body-Pack Transmitter (BCWBT) output level is controlled by the body-pack's volume control. REAR VIEW Gold Seal Series Amplifier ACOUSTIC EQ O U T Volume Control for Enhancer The Enhancer Receiver's mixed output level (for each channel) is controlled by the "A" and "B" Volume Controls. GOLD SEAL SERIES MIC 1 62.5 MIC 2 MIC 3 MIC 4 MIC 5/TEL Fig. A (see NOTE 1) FEEDBACK CONTROL MIC 6/AUX 1 125 250 500 1K 2K 4K 8K 12K FRONT VIEW 16K + 12 AUX 2 + 12 MASTER POWER 9 4 4 6 4 6 4 6 4 6 4 6 4 6 ACOUSTIC EQ 6 6 3 2 8 2 8 2 8 2 8 2 8 2 8 2 8 0 O U T 0 3 0 10 0 10 0 10 0 10 0 10 0 10 FRONT VIEW Recessed Volume Control. BLACK 125 WIRE COLOR BLACK BROWN RED ORANGE YELLOW GREEN BLUE VIOLET GREY WHITE IN 315 500 800 1.2K 2K 3.1K 5K 8 OUT 8K AUDIO ENHANCEMENT OUT Master Volume Control for System Output BROWN REAR VIEW + REAR VIEW ESYS1 NOTES: + + 1. When switch is set to "FEEDBACK CONTROL," the amplifier can be used to improve "Max Volume before Feedback". (see Fig. A) 25V COMMON 4W 2W 1W 1/2W 1/4W 1/8W ---------------------- 200 CONTOUR LINK switch set to “IN” + (see NOTE 2) 10 IN 12 - 12 - 25V Fig. B 0 2 FEEDBACK CONTROL 6 + ground CUT 10 6 9 Both LINK Connection jumpers should remain in place S86T725PG8WVR Ceiling Speakers (4) 0 4 2. Cut/Remove bare wire tips off of unused speaker leads on all speakers. (see Fig. B) 3. If necessary, individual speaker output levels can be adjusted by the Speaker’s Recessed Volume Control or by Power Taps. (see Fig. C) Fig. C (see NOTE 3) 25V 25V 25V 25V ESYS2(M) MAX BATT CHG. The (BCWHT) Wireless Handheld Microphone operates solely on channel "B". The BCWHT Mic is available with the ESYS “M” package. MI ENHANCER IR Receiver BCWBT BCIRS Unit 1 FRONT VIEW BCWHT Wireless Handheld MIC BCIRS Unit 2 The Enhancer Body-Pack Transmitter (BCWBT) output level is controlled by the body-pack's volume control. REAR VIEW Gold Seal Series Amplifier ACOUSTIC EQ O U T Volume Control for Enhancer The Enhancer Receiver's mixed output level (for each channel) is controlled by the "A" and "B" Volume Controls. 62.5 MIC 2 MIC 3 MIC 4 MIC 5/TEL MIC 6/AUX 1 (see NOTE 1) FEEDBACK CONTROL GOLD SEAL SERIES MIC 1 Fig. A 125 250 500 1K 2K 4K 8K 12K 16K + 12 AUX 2 FRONT VIEW + 12 MASTER POWER 9 4 4 6 4 6 4 6 4 6 4 6 4 6 ACOUSTIC EQ 6 6 3 2 8 2 8 2 8 2 8 2 8 2 8 2 8 0 0 3 0 10 0 10 0 10 0 10 0 10 0 10 0 10 O U T 6 0 10 2 FEEDBACK CONTROL 6 4 8 9 12 - 12 125 200 315 500 800 1.2K 2K 3.1K 5K 8K IN FG15W Surface-Mount Speakers (4) IN OUT AUDIO ENHANCEMENT CONTOUR OUT Both LINK Connection jumpers should remain in place Master Volume Control for System Output FRONT VIEW + 8 ground LINK switch set to “IN” REAR VIEW REAR VIEW ESYS2 NOTES: 8 1. When switch is set to "FEEDBACK CONTROL," the amplifier can be used to improve "Max Volume before Feedback". (see Fig. A) 7.5W 1W 2W 1W + 15W 7.5W 4W + + 2W 1W 8 8 Series Connected 4W 2W 1W 8 8 (see NOTE 2) 8 7.5W LINE + 8 4W 8 INPUT 15W 7.5W LINE + 8 8 + 2W 1W LINE 4W INPUT 15W 7.5W 8 + 8 + LINE 15W Fig. B INPUT 2W INPUT 4W 8 FG15W set to LINE 15W 8 8 Series Connected 2. On each FG15W speaker, turn the Tap Selector setting to 8 . (see Fig. B) ESYS3(M) MAX BATT CHG. ENHANCER IR Receiver The (BCWHT) Wireless Handheld Microphone operates solely on channel "B". The BCWHT Mic is available with the ESYS “M” package. MI BCWBT BCIRS Unit 1 FRONT VIEW BCWHT Wireless Handheld MIC BCIRS Unit 2 The Enhancer Body-Pack Transmitter (BCWBT) output level is controlled by the body-pack's volume control. REAR VIEW Gold Seal Series Amplifier ACOUSTIC EQ O U T Volume Control for Enhancer The Enhancer Receiver's mixed output level (for each channel) is controlled by the "A" and "B" Volume Controls. GOLD SEAL SERIES MIC 1 62.5 MIC 2 MIC 3 MIC 4 MIC 5/TEL Fig. A (see NOTE 1) FEEDBACK CONTROL MIC 6/AUX 1 125 250 500 1K 2K 4K 8K 12K FRONT VIEW 16K + 12 AUX 2 + 12 MASTER POWER 9 4 4 6 4 6 4 6 4 6 4 6 4 6 ACOUSTIC EQ 6 6 3 2 8 2 8 2 8 2 8 2 8 2 8 2 0 8 O U T 0 3 0 CSD2X2 Ceiling Speakers (4) 0 10 0 10 0 10 0 10 0 10 RED BLACK + 0 10 2 8 FEEDBACK CONTROL 6 IN 12 125 200 315 500 800 1.2K 2K 3.1K 5K OUT 8K AUDIO ENHANCEMENT CONTOUR IN OUT Master Volume Control for System Output LINK switch set to “IN” 25V (see NOTE 2) 10 12 - + ground Fig. B 0 6 9 Both LINK Connection jumpers should remain in place FULL VIEW CUT 10 4 YELLOW TOP VIEW + REAR VIEW ESYS3 NOTES: + + 1. When switch is set to "FEEDBACK CONTROL," the amplifier can be used to improve "Max Volume before Feedback". (see Fig. A) 2. Cut/Remove bare wire tips off of unused speaker leads. (see Fig. B) 3. If necessary, individual speaker output levels can be adjusted by the Speaker’s Power Tap Selector Switch. (see Fig. C) 25V 25V 25V 25V Fig. C (see NOTE 3) ESYS4(M) MAX BATT CHG. ENHANCER IR Receiver The (BCWHT) Wireless Handheld Microphone operates solely on channel "B". The BCWHT Mic is available with the ESYS “M” package. MI BCWBT BCIRS Unit 1 FRONT VIEW BCWHT Wireless Handheld MIC BCIRS Unit 2 The Enhancer Body-Pack Transmitter (BCWBT) output level is controlled by the body-pack's volume control. REAR VIEW ACOUSTIC EQ O U T Volume Control for Enhancer The Enhancer Receiver's mixed output level (for each channel) is controlled by the "A" and "B" Volume Controls. Fig. A (see NOTE 1) 62.5 MIC 2 MIC 3 MIC 4 MIC 5/TEL MIC 6/AUX 1 (see NOTE 2) FEEDBACK CONTROL GOLD SEAL SERIES MIC 1 125 250 500 Gold Seal Series Amplifier Fig. B 1K 2K 4K 8K 12K 16K + 12 AUX 2 FRONT VIEW + 12 MASTER POWER 9 4 4 6 4 6 4 6 4 6 4 6 4 6 ACOUSTIC EQ 6 6 3 2 8 2 8 2 8 2 8 2 8 2 8 2 8 0 0 3 0 10 0 10 0 10 0 10 0 10 0 10 0 10 O U T 6 0 10 2 FEEDBACK CONTROL 6 4 8 9 Remove 12 - 12 125 CONTOUR IN HFCS1 Ceiling Speakers (4) Fig. C 4 2K 3.1K 5K 8K IN OUT AUDIO ENHANCEMENT Master Volume Control for System Output 2 2 1 61 61 V07 4 V001 23 61 2 3 61 8 4 LINK switch set to “IN” 32 16 32 100V 16 1 70V 6 1.2K + ground HFCS1 set to 800 4 8 8 1 500 LINK Connection jumper should remain in place 8 4 16 2 315 FRONT VIEW (see NOTE 3) 2 OUT 200 ++__ ++__ 16 REAR VIEW ++__ ++__ REAR VIEW ESYS4 NOTES: 1. On rear panel of the amplifier, remove the "LINK" connection. (see Fig. A) 2. When switch is set to "FEEDBACK CONTROL," the amplifier can be used to improve "Max Volume before Feedback". (see Fig. B) 3. On each HFCS1 speaker, turn the Tap Selector setting to 16 . (see Fig. C) 16 16 16 16 ESYS3(M) MAX BATT CHG. ENHANCER IR Receiver The (BCWHT) Wireless Handheld Microphone operates solely on channel "B". The BCWHT Mic is available with the ESYS “M” package. MI BCWBT BCIRS Unit 1 FRONT VIEW BCWHT Wireless Handheld MIC BCIRS Unit 2 The Enhancer Body-Pack Transmitter (BCWBT) output level is controlled by the body-pack's volume control. REAR VIEW Gold Seal Series Amplifier ACOUSTIC EQ O U T Volume Control for Enhancer The Enhancer Receiver's mixed output level (for each channel) is controlled by the "A" and "B" Volume Controls. GOLD SEAL SERIES MIC 1 62.5 MIC 2 MIC 3 MIC 4 MIC 5/TEL Fig. A (see NOTE 1) FEEDBACK CONTROL MIC 6/AUX 1 125 250 500 1K 2K 4K 8K 12K FRONT VIEW 16K + 12 AUX 2 + 12 MASTER POWER 9 4 4 6 4 6 4 6 4 6 4 6 4 6 ACOUSTIC EQ 6 6 3 2 8 2 8 2 8 2 8 2 8 2 8 2 0 8 O U T 0 3 0 CSD2X2 Ceiling Speakers (4) 0 10 0 10 0 10 0 10 0 10 RED BLACK + 0 10 2 8 FEEDBACK CONTROL 6 IN 12 125 200 315 500 800 1.2K 2K 3.1K 5K OUT 8K AUDIO ENHANCEMENT CONTOUR IN OUT Master Volume Control for System Output LINK switch set to “IN” 25V (see NOTE 2) 10 12 - + ground Fig. B 0 6 9 Both LINK Connection jumpers should remain in place FULL VIEW CUT 10 4 YELLOW TOP VIEW + REAR VIEW ESYS3 NOTES: + + 1. When switch is set to "FEEDBACK CONTROL," the amplifier can be used to improve "Max Volume before Feedback". (see Fig. A) 2. Cut/Remove bare wire tips off of unused speaker leads. (see Fig. B) 3. If necessary, individual speaker output levels can be adjusted by the Speaker’s Power Tap Selector Switch. (see Fig. C) 25V 25V 25V 25V Fig. C (see NOTE 3) ESYS4(M) MAX BATT CHG. ENHANCER IR Receiver The (BCWHT) Wireless Handheld Microphone operates solely on channel "B". The BCWHT Mic is available with the ESYS “M” package. MI BCWBT BCIRS Unit 1 FRONT VIEW BCWHT Wireless Handheld MIC BCIRS Unit 2 The Enhancer Body-Pack Transmitter (BCWBT) output level is controlled by the body-pack's volume control. REAR VIEW ACOUSTIC EQ O U T Volume Control for Enhancer The Enhancer Receiver's mixed output level (for each channel) is controlled by the "A" and "B" Volume Controls. Fig. A (see NOTE 1) 62.5 MIC 2 MIC 3 MIC 4 MIC 5/TEL MIC 6/AUX 1 (see NOTE 2) FEEDBACK CONTROL GOLD SEAL SERIES MIC 1 125 250 500 Gold Seal Series Amplifier Fig. B 1K 2K 4K 8K 12K 16K + 12 AUX 2 FRONT VIEW + 12 MASTER POWER 9 4 4 6 4 6 4 6 4 6 4 6 4 6 ACOUSTIC EQ 6 6 3 2 8 2 8 2 8 2 8 2 8 2 8 2 8 0 0 3 0 10 0 10 0 10 0 10 0 10 0 10 0 10 O U T 6 0 10 2 FEEDBACK CONTROL 6 4 8 9 Remove 12 - 12 125 CONTOUR IN HFCS1 Ceiling Speakers (4) Fig. C 4 2K 3.1K 5K 8K IN OUT AUDIO ENHANCEMENT Master Volume Control for System Output 2 2 1 61 61 V07 4 V001 23 61 2 3 61 8 4 LINK switch set to “IN” 32 16 32 100V 16 1 70V 6 1.2K + ground HFCS1 set to 800 4 8 8 1 500 LINK Connection jumper should remain in place 8 4 16 2 315 FRONT VIEW (see NOTE 3) 2 OUT 200 ++__ ++__ 16 REAR VIEW ++__ ++__ REAR VIEW ESYS4 NOTES: 1. On rear panel of the amplifier, remove the "LINK" connection. (see Fig. A) 2. When switch is set to "FEEDBACK CONTROL," the amplifier can be used to improve "Max Volume before Feedback". (see Fig. B) 3. On each HFCS1 speaker, turn the Tap Selector setting to 16 . (see Fig. C) 16 16 16 16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:30 Create Date : 2009:12:29 10:44-05:00 Modify Date : 2009:12:29 10:48:44-05:00 Creator Tool : QuarkXPress 7.2 Metadata Date : 2009:12:29 10:48:44-05:00 Producer : Acrobat Distiller 8.1.0 (Macintosh) Format : application/pdf Creator : jbritnell Title : 54-7891-02E.qxd:Layout 1 Document ID : uuid:122dccaa-d2e7-0846-9ed0-269144c81b3a Instance ID : uuid:df04a62e-7370-6841-b057-9bb22bc6e9f1 Has XFA : No Page Count : 4 Author : jbritnellEXIF Metadata provided by EXIF.tools