Power Vector Amps Bogen V35/V60/V100/V150/V250 Amplifier Specifications V35 V60 V100 V150 V250 Amplifiers Specs
User Manual: Bogen V35/V60/V100/V150/V250 Amplifier Specifications Bogen Amplifiers s - Telecomuserguides.com
Open the PDF directly: View PDF .
Page Count: 2
Download | |
Open PDF In Browser | View PDF |
Power Vector Modular Amplifiers Models V35, V60, V100, V150, and V250 Description Bogen's Power Vector modular amplifiers offer a wide range of power levels from which to choose, with five models from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. Each model includes eight module bays for plug-in input modules and allows up to four levels of priority between modules. Two module bays are capable of accepting plug-in signal-processing output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. Each model includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately). Features • 5 models ranging from 35W to 250W each; a mixer-only version (VMIX) is also available • Two-color LED for each channel indicates input signal or clipping • Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads • Bass and treble control with bypass switch (located in module bay 6) • 8 module bays • 125 Hz Low Cut switch (located in module bay 6) • Wide selection of advanced plug-in modules (modules sold separately) • Signal-processing insert jacks allow external equipment to be inserted between the pre-amp output and the power amp input • 4 levels of priority between modules • 2 module bays capable of handling plug-in signalprocessing output modules • Pre-EQ, unbalanced, buffered output signal (“post” all unit controls, but “pre” any external “Insert” equipment connected) • 11-segment LED output level meter monitors the output level of the power amplifier with Avg./Peak meter switch • Grounded, unswitched AC convenience receptacle with a 500W maximum capacity provided for external equipment • Motorized master volume control can be remotely operated • 8 module security cover/filler plates included with amplifier (PVMC) • Lockable switch permits user to select either transformer-coupled outputs or a direct lowimpedance output • Push-button remote volume control panel (Model RVCP, sold separately) • 5-position barrier strip, with clamping washers, provides connections for speaker loads • Bridging In/Out connector • External access to priority mute buses • Bridging jack and Mute terminals join multiple Power Vector amps and mixers together • Security cover to selectively protect volume, bass, and treble controls (Model PVSC, sold separately) • Rack mountable (with rack mounting kit RPK87, sold separately) • 2 rack spaces high (3-1/2") • Listed to UL Standard 60065 for U.S. and Canada • Independent volume control for each of the eight module bays Specifications subject to change without notice. © 2003 Bogen Communications, Inc. 54-8013-01E 1201 Technical Specifications Power Output (RMS): V35 V60 V100 V150 Rated: Typical @ 1 kHz:* 35W 45W 60W 85W 100W 140W 150W 250W 200W 340W Frequency Response Transformer: Direct: 45 Hz to 20 kHz; +0/-2 dB 20 Hz to 20 kHz; +0/-1 dB Distortion Transformer: Direct: Signal-to-Noise† Fundamental: With SAX1R Module: With MIC1S Module: With TEL1S Module: Tone Controls Bass Frequency: Treble Frequency: Low Cut Frequency: Thermal Emissions: (BTU/hr.) V35 V60 V100 V150 V250 174.2 204.9 495.2 696.7 911.9 Inserts Insert "OUT" Level: Insert "OUT" Impedance: Insert "IN" Sensitivity: Insert "IN" Impedance: 1VRMS (@FRP) 50 ohms maximum 1VRMS 10k ohms minimum < 0.5%** < 0.1%** (.05 typical @ 1 kHz) Bridging In/Out Bus Level: Bus Impedance: 250 mVRMS (@FRP) 10k ohms maximum -94 -70 -60 -70 Pre-EQ Output Output Level: Output Impedance: 4VRMS (@FRP) 50 ohms maximum AC Power Receptacle: 500 watts maximum power, unswitched AC Voltage: 120V AC, 60 Hz AC Current: V35 0.6A V60 V100 V150 V250 1.3A 2.0A 3.5A 5.5A Product Weight (lb.): V35 22 V60 26 Dimensions: 17-1/4" W x 3-7/8" H x 14-3/4" D (all models) dB dB dB dB @100 Hz (+/- 10 dB minimum) @10 kHz (+/- 10 dB minimum) @125 Hz (-6 dB/octave) Sensitivity Output Regulation: Output Impedance Transformer-Coupled: Direct Coupled: 0.4V (at backplane connector) 2 dB or better, no load to full load 70V, 25V, 8 ohms (bal or unbal) 4 ohms (minimum) * Typical, @1 kHz/0.1% THD/4-ohm direct Architect and Engineer Specifications V250 ** THD+N, Maximum, Full bandwidth @ FRP The amplifier shall be a Bogen Power Vector Amplifier, Model V35, V60, V100, V150, or V250. The amplifier shall be compatible with both high- (70/25V) and low- (4/8ohm) impedance speakers, with the capability of 35, 60, 100, 150, or 250 watts, respectively. The amplifier shall provide 8 module bays for plug-in input modules with two of the bays also capable of handling plug-in signal-processing output modules. There shall be 4 levels of priority available between all modules. Each of the 8 module bays shall have an associated independent volume control. Each independent volume control shall have a signal/clip LED to indicate signal condition. Each amplifier shall also include bass and treble controls, as well as a motorized master volume control, which can be remotely operated using the RVCP accessory (sold separately). For larger applications, the amplifier shall be able to bridge to another Power Vector amplifier or mixer using a built-in bridging jack and mute terminals. This connection shall effectively increase the number of inputs. An 11-segment LED output level meter will register either the average or peak level of the amplifierʼs output level, as selected by an Average/Peak switch. Each Power Vector amplifier shall have a Tone Control Bypass switch and a Low-Cut Filter switch, both located on the rear of the amplifier in module bay 6. V100 V150 V250 28 31 32 † Referenced to FRP output level, 20 Hz to 20 kHz bandwidth limited A lockable switch will permit the selection of transformercoupled output or direct output for speaker connections. Signal-processing Insert jacks (RCA connectors) will allow external equipment to be inserted between the preamp output and the power amp input. Each model will have a Pre-EQ, unbalanced (RCA jack), buffered output whose signal is post all volume controls, tone controls, and output module signal-processing, but before (pre-EQ) any external signal-processing equipment connected to the Insert jacks. Each amplifier will have bridging in/out capability and individual access to internal module priority buses for easy connection of multiple amplifiers or mixers in a system. Each amplifier will include a 500W maximum, unswitched AC power receptacle. The amplifier shall fit into a 19" rack and fit in two rack spaces (2 RU). It shall allow the attachment of feet for tabletop placement. Each model shall measure 17-1/4" W x 3-7/8" H x 14-3/4" D. The V35 shall weigh 22 lb., the V60 - 26 lb., the V100 - 28 lb., the V150 - 31 lb., and the V250 - 32 lb. 50 Spring Street, Ramsey, New Jersey 07446, U.S.A. Tel. 201-934-8500 • Fax: 201-934-9832 www.bogen.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:30 Producer : Acrobat Distiller 8.3.1 (Macintosh) Keywords : Power Vector Amps Format : application/pdf Creator : Title : Power Vector Amps Subject : Power Vector Amps Modify Date : 2012:02:09 10:35:20-05:00 Creator Tool : QuarkXPress 8.5 Create Date : 2012:02:09 10:34:37-05:00 Metadata Date : 2012:02:09 10:35:20-05:00 Document ID : uuid:09c2c33b-5984-3a4e-91b4-67365ccf5c70 Instance ID : uuid:23b2e30b-d023-0c44-a816-72cfef04716e Page Count : 2 Page Layout : SinglePage Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools