Power Vector Amps Bogen V35/V60/V100/V150/V250 Amplifier Specifications V35 V60 V100 V150 V250 Amplifiers Specs
User Manual: Bogen V35/V60/V100/V150/V250 Amplifier Specifications Bogen Amplifiers s - Telecomuserguides.com
Open the PDF directly: View PDF 
.
Page Count: 2
• 5 models ranging from 35W to 250W each;
a mixer-only version (VMIX) is also available
• Capable of handling 70V, 25V, 8-ohm, and 4-ohm
speaker loads
• 8 module bays
• Wide selection of advanced plug-in modules
(modules sold separately)
• 4 levels of priority between modules
• 2 module bays capable of handling plug-in signal-
processing output modules
• 11-segment LED output level meter monitors the
output level of the power amplifier with Avg./Peak
meter switch
• Motorized master volume control can be remotely
operated
• Lockable switch permits user to select either
transformer-coupled outputs or a direct low-
impedance output
• 5-position barrier strip, with clamping washers,
provides connections for speaker loads
• Bridging In/Out connector
• External access to priority mute buses
• Bridging jack and Mute terminals join multiple
Power Vector amps and mixers together
• Independent volume control for each of the eight
module bays
• Two-color LED for each channel indicates input
signal or clipping
•
Bass and treble control with bypass switch (located
in module bay 6)
• 125 Hz Low Cut switch (located in module bay 6)
• Signal-processing insert jacks allow external
equipment to be inserted between the pre-amp
output and the power amp input
• Pre-EQ, unbalanced, buffered output signal
(“post” all unit controls, but “pre” any external
“Insert” equipment connected)
• Grounded, unswitched AC convenience recepta-
cle with a 500W maximum capacity provided for
external equipment
• 8 module security cover/filler plates included with
amplifier (PVMC)
• Push-button remote volume control panel (Model
RVCP, sold separately)
• Security cover to selectively protect volume,
bass, and treble controls (Model PVSC, sold sep-
arately)
• Rack mountable (with rack mounting kit RPK87,
sold separately)
• 2 rack spaces high (3-1/2")
• Listed to UL Standard 60065 for U.S. and Canada
Features
Description
Specifications subject to change without notice.
© 2003 Bogen Communications, Inc.
54-8013-01E 1201
Power Vector
Modular
Amplifiers
Models V35, V60,
V100, V150, and V250
Bogen's Power Vector modular amplifiers offer a wide range of power levels from which to choose, with five
models from 35W to 250W. The amplifiers are designed to work with both high- (70/25V) and low- (4/8-ohm)
impedance speaker systems.
Each model includes eight module bays for plug-in input modules and allows up to four levels of priority
between modules. Two module bays are capable of accepting plug-in signal-processing output modules.
Each module is controlled by an independent volume control with an associated signal/clip LED for signal
status. An 11-segment LED output meter monitors output signal level.
Each model includes a motorized master volume control that can be controlled using a remote volume
control panel (RVCP, sold separately).
The amplifier shall be a Bogen Power Vector Amplifier,
Model V35, V60, V100, V150, or V250. The amplifier shall
be compatible with both high- (70/25V) and low- (4/8-
ohm) impedance speakers, with the capability of 35, 60,
100, 150, or 250 watts, respectively.
The amplifier shall provide 8 module bays for plug-in input
modules with two of the bays also capable of handling
plug-in signal-processing output modules. There shall be
4 levels of priority available between all modules.
Each of the 8 module bays shall have an associated inde-
pendent volume control. Each independent volume con-
trol shall have a signal/clip LED to indicate signal condi-
tion. Each amplifier shall also include bass and treble con-
trols, as well as a motorized master volume control, which
can be remotely operated using the RVCP accessory
(sold separately).
For larger applications, the amplifier shall be able to
bridge to another Power Vector amplifier or mixer using a
built-in bridging jack and mute terminals. This connection
shall effectively increase the number of inputs.
An 11-segment LED output level meter will register either
the average or peak level of the amplifierʼs output level, as
selected by an Average/Peak switch. Each Power Vector
amplifier shall have a Tone Control Bypass switch and a
Low-Cut Filter switch, both located on the rear of the
amplifier in module bay 6.
A lockable switch will permit the selection of transformer-
coupled output or direct output for speaker connections.
Signal-processing Insert jacks (RCA connectors) will
allow external equipment to be inserted between the pre-
amp output and the power amp input.
Each model will have a Pre-EQ, unbalanced (RCA jack),
buffered output whose signal is post all volume controls,
tone controls, and output module signal-processing, but
before (pre-EQ) any external signal-processing equip-
ment connected to the Insert jacks.
Each amplifier will have bridging in/out capability and indi-
vidual access to internal module priority buses for easy
connection of multiple amplifiers or mixers in a system.
Each amplifier will include a 500W maximum, unswitched
AC power receptacle.
The amplifier shall fit into a 19" rack and fit in two rack
spaces (2 RU). It shall allow the attachment of feet for
tabletop placement. Each model shall measure 17-1/4" W
x 3-7/8" H x 14-3/4" D. The V35 shall weigh 22 lb., the
V60 - 26 lb., the V100 - 28 lb., the V150 - 31 lb., and the
V250 - 32 lb.
Architect and
Engineer
Specifications
50 Spring Street, Ramsey, New Jersey 07446, U.S.A.
Tel. 201-934-8500 • Fax: 201-934-9832
www.bogen.com
Power Output (RMS): V35 V60 V100 V150 V250
Rated: 35W 60W 100W 150W 250W
Typical @ 1 kHz:* 45W 85W 140W 200W 340W
Frequency Response
Transformer: 45 Hz to 20 kHz; +0/-2 dB
Direct: 20 Hz to 20 kHz; +0/-1 dB
Distortion
Transformer: < 0.5%**
Direct: < 0.1%** (.05 typical @ 1 kHz)
Signal-to-Noise†
Fundamental: -94 dB
With SAX1R Module: -70 dB
With MIC1S Module: -60 dB
With TEL1S Module: -70 dB
Tone Controls
Bass Frequency: @100 Hz (+/- 10 dB minimum)
Treble Frequency: @10 kHz (+/- 10 dB minimum)
Low Cut Frequency: @125 Hz (-6 dB/octave)
Sensitivity 0.4V (at backplane connector)
Output Regulation: 2 dB or better, no load to full load
Output Impedance
Transformer-Coupled: 70V, 25V, 8 ohms (bal or unbal)
Direct Coupled: 4 ohms (minimum)
Thermal Emissions: V35 V60 V100 V150 V250
(BTU/hr.) 174.2 204.9 495.2 696.7 911.9
Inserts
Insert "OUT" Level: 1VRMS (@FRP)
Insert "OUT" Impedance: 50 ohms maximum
Insert "IN" Sensitivity: 1VRMS
Insert "IN" Impedance: 10k ohms minimum
Bridging In/Out
Bus Level: 250 mVRMS (@FRP)
Bus Impedance: 10k ohms maximum
Pre-EQ Output
Output Level: 4VRMS (@FRP)
Output Impedance: 50 ohms maximum
AC Power Receptacle: 500 watts maximum power, unswitched
AC Voltage: 120V AC, 60 Hz
AC Current: V35 V60 V100 V150 V250
0.6A 1.3A 2.0A 3.5A 5.5A
Product Weight (lb.): V35 V60 V100 V150 V250
22 26 28 31 32
Dimensions: 17-1/4" W x 3-7/8" H x 14-3/4" D
(all models)
Technical
Specifications
* Typical, @1 kHz/0.1% THD/4-ohm direct ** THD+N, Maximum, Full bandwidth @ FRP † Referenced to FRP output level, 20 Hz to 20 kHz bandwidth limited
