Canon Powershot D10 Manual For Canons First Rugged Camera Ever
User Manual: Canon-Powershot-D10-Manual-for-Canons-First-Rugged-Camera-Ever
Open the PDF directly: View PDF 
.
Page Count: 163
| Download | |
| Open PDF In Browser | View PDF |
EC256_00-Cov14_(215).fm Page 1 Wednesday, October 28, 2009 10:47 AM
Battery Charger CB-2LY
This product is not intended to be serviced. Should the product cease
to function in its intended manner, it should be returned to the
manufacturer or be discarded.
Y
P
O
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE
INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug
adapter of the proper configuration for the power outlet.
This battery charger is for exclusive use with Battery Pack NB-6L
(1.00 Ah). There is a danger of explosion if other battery packs are
used.
Trademark Acknowledgments
• The SDHC logo is a trademark.
Disclaimer
• Reprinting, transmitting, or storing in a retrieval system any part of this
guide without the permission of Canon is prohibited.
• Canon reserves the right to change the contents of this guide at any
time without prior notice.
• Illustrations and screenshots in this guide may differ slightly from the
actual equipment.
• Every effort has been made to ensure that the information contained in
this guide is accurate and complete. However, if you notice any errors
or omissions, please contact the Canon customer service center
indicated on the customer support list included with the product.
• The above items notwithstanding, Canon accepts no liability for
damages due to mistaken operation of the products.
Camera User Guide
Camera User Guide
C
DIGITAL CAMERA
This power unit is intended to be correctly orientated in a vertical or
floor mount position.
ENGLISH
CDI-E404-030
XXXXXXX
© CANON INC. 2009
PRINTED IN JAPAN
• Make sure you read this guide before using the camera.
• Store this guide safely so that you can use it in the future.
(EC256)_CDI-E404_Guide_E.book Page 2 Friday, February 6, 2009 7:44 PM
Checking the Package Contents
Check if the following items are included in your camera package. If anything
is missing, contact the retailer from which you purchased the camera.
Camera
Battery Pack NB-6L
(with Terminal Cover)
Interface Cable
IFC-400PCU
AV Cable
AVC-DC400
Camera User Guide
(This Guide)
Y
P
O
DIGITAL CAMERA
Solution Disk
C
Wrist Strap
WS-DC8
Battery Charger
CB-2LY/CB-2LYE
Warranty
Card
Strap Mount
“Canon Customer
Support” Leaflet
Also refer to the PDF manuals on the CD-ROM. After
installation, shortcut icons appear on the desktop. If the
software installation fails, you can find the manuals in the
Readme folder on the CD-ROM.
• Personal Printing Guide
Read when you want to connect the camera to a printer and
print.
• Software Starter Guide
Read when you want to connect the camera to a computer.
• Detailed user guides (PDF format) for the included
ZoomBrowser EX and ImageBrowser programs are available
on the Canon website (English only):
http://web.canon.jp/imaging/information-e.html
• A memory card is not included.
• Adobe Reader is required to view the PDF manuals.
2
(EC256)_CDI-E404_Guide_E.book Page 3 Friday, February 6, 2009 7:44 PM
Read This First
Test Shots
Take some initial test shots and play them back to make sure the images
were recorded correctly. Please note that Canon Inc., its subsidiaries and
affiliates, and its distributors are not liable for any consequential damages
arising from any malfunction of a camera or accessory, including memory
cards, that results in the failure of an image to be recorded or to be recorded
in a way that is machine readable.
Warning Against Copyright Infringement
The images recorded with this camera are intended for personal use. Do not
record images that infringe upon copyright laws without the prior permission
of the copyright holder. Please be advised that in certain cases the copying
of images from performances, exhibitions, or commercial properties by
means of a camera or other device may contravene copyright or other legal
rights even if the image was shot for personal use.
Warranty Limitations
Y
P
O
This camera’s warranty is only effective in the country of sale. If there is a
problem with the camera while abroad, please return it to the country of sale
before proceeding with a warranty claim to a Canon Customer Support Help
Desk. For Canon Customer Support contacts, please see the customer
support list supplied with your camera.
LCD Monitor
C
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification, but
occasionally non-performing pixels may appear as bright or dark dots. This
is not a malfunction and has no effect on the recorded image.
Camera Body Temperature
Please take care when operating the camera for an extended period as the
camera body may become warm. This is not a malfunction.
Memory Cards
The various types of memory cards that can be used in this camera are
collectively referred to as memory cards in this guide.
About the Waterproof, Dustproof, and Shock Resistant
Capability of this Camera
This camera is subjected to Canon standard testing. However, it is not
guaranteed that this camera will not damage or malfunction. (For more
information about waterproof, dustproof, and shock resistant specifications,
see p. 157)
Be sure to read the Cautions regarding the waterproof, dustproof, and
shock resistant capabilities of the camera on pp. 14, 15.
3
(EC256)_CDI-E404_Guide_E.book Page 4 Friday, February 6, 2009 7:44 PM
What Do You Want to Do?
4
Shoot
● Shoot, leaving it to the camera to make settings . . . . . . . . . . . . 26
● Shoot to match special conditions. . . . . . . . . . . . . . . . . . . . 56 – 59
Take good people shots
I
Portraits
(p. 56)
F
With nightscapes
(p. 57)
V
Kids and pets
(p. 57)
Take good landscapes
J
Landscapes
(p. 56)
Indoors
(p. 57)
U
t
C
Fireworks
(p. 57)
P
With snowscapes
(p. 58)
O
Y
P
O
Sunsets
(p. 57)
Shoot various other scenes
H
w
At the beach
(p. 58)
S
Underwater
(p. 58)
y
Aquarium
(p. 58)
Foliage
(p. 58)
Z
Low light
(p. 59)
● Focus on faces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 65, 80
● Shoot in places where I cannot use the flash (turn off the flash) 60
● Shoot pictures with me in them too (self-timer). . . . . . . . . . . 64, 65
● Insert the date and time into my shots . . . . . . . . . . . . . . . . . . . . 63
● Take close-up pictures of subjects (macro shooting) . . . . . . . . . 69
● Take sepia toned or black and white pictures . . . . . . . . . . . . . . . 75
● Change the size of picture I want to take (recording pixels) . . . . 70
● Take pictures continuously . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
● Shoot without the effects of camera shake
(image stabilization) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
● Shoot without the effects of camera shake even in
low light conditions (High ISO Auto) . . . . . . . . . . . . . . . . . . . 59, 73
4
(EC256)_CDI-E404_Guide_E.book Page 5 Friday, February 6, 2009 7:44 PM
What Do You Want to Do?
● Maintain the focus on moving subjects (Servo AF). . . . . . . . . . . 82
● Make dark subjects appear brighter (i-Contrast). . . . . . . . . . . . . 87
1
View
● Look at my pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
● Automatically play back pictures (slideshow) . . . . . . . . . . . . . . 105
● Look at my pictures on a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
● Quickly search pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . 102, 103
● Erase pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 110
● Protect pictures from accidental erasure. . . . . . . . . . . . . . . . . . 114
Y
E
P
O
Shoot/View Movies
● Shoot movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
● View movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Print
C
2
● Easily print pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Save
● Save images to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Other
3
● Turn off sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
● Use the camera abroad. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17, 131
5
(EC256)_CDI-E404_Guide_E.book Page 6 Friday, February 6, 2009 7:44 PM
Table of Contents
Chapters 1 – 3 explain the basic operations and frequently used functions of
this camera. Chapters 4 onward explain the advanced functions, letting you
learn more as you read each chapter.
Checking the Package Contents .......2
Read This First ..................................3
What Do You Want to Do? ................4
Conventions Used in this Guide ........8
Safety Precautions.............................9
1 Getting Started ....................13
Cautions When Using this
Waterproof, Dustproof, and
Shock Resistant Camera .. 14
Y
P
O
Charging the Battery........................16
Inserting the Battery and
Memory Card .............................18
Setting the Date and Time ...............21
Setting the Display Language..........23
Formatting Memory Cards ...............24
Pressing the Shutter Button.............25
ƒ Taking Pictures ...........................26
1 Viewing Images ..........................29
a Erasing Images............................29
c Printing Images ...........................30
E Shooting Movies.........................32
1 Viewing Movies ..........................34
Transferring Images to a Computer.35
Accessories .....................................38
Separately Sold Accessories ...........40
C
2 Learning More......................41
Components Guide..........................42
Information Displayed
on the Screen.............................44
Indicator ...........................................46
6
m FUNC. Menu – Basic
Operations................................. 47
n Menu – Basic Operations .... 48
Changing the Sound Settings ......... 49
Changing the Screen Brightness .... 50
Returning the Camera to Default
Settings ..................................... 51
Low Level Memory Card
Formatting ................................. 52
Power Saving Function
(Auto Power Down) ................... 53
Clock Functions............................... 53
3 Shooting in Special
Conditions and Commonly
Used Functions................... 55
K Shooting in Various
Conditions ................................. 56
! Turning the Flash Off.................. 60
Zooming in More Closely on
Subjects (Digital Zoom) ............. 61
Inserting the Date and Time............ 63
Ò Using the Self-Timer................... 64
" Using the Face Self-Timer.......... 65
4 Selecting Settings
Yourself ............................... 67
G Shooting in Program AE ............. 68
h Turning the Flash On................... 68
e Shooting Close-ups (Macro) ....... 69
u Shooting Far Away Subjects
(Infinity)...................................... 69
Changing the Recording Pixels....... 70
(EC256)_CDI-E404_Guide_E.book Page 7 Friday, February 6, 2009 7:44 PM
Table of Contents
Changing the Image Quality
(Compression Ratio) ................. 70
b Adjusting the Brightness
(Exposure Compensation) ........ 72
W Continuous Shooting ................. 72
Changing the ISO Speed ................ 73
Adjusting the White Balance ........... 74
Changing the Tone
of an Image (My Colors) ........... 75
Î Shooting Using the Two Second
Self-Timer ................................. 76
$ Customizing the Self-Timer ........ 77
Shooting Using a TV Monitor .......... 77
Changing the Composition with
the Focus Lock.......................... 78
Changing the Movie Mode .............. 96
Changing the Image Quality............ 96
AE Lock/Exposure Shift................... 97
Other Shooting Functions................ 98
Playback Functions ......................... 98
* Editing ......................................... 99
7 Using Playback and Other
Functions........................... 101
g Searching Images
(Index Display)......................... 102
d Viewing Images in
Filtered Playback ..................... 103
. Viewing Slideshows .................. 105
Checking the Focus....................... 107
k Magnifying Images ................... 108
+ Changing Image Transitions..... 108
Viewing Images on a TV ............... 109
/ Erasing All Images.................... 110
: Protecting Images................... 114
; Organizing Images
by Category (My Category) ..... 116
\ Rotating Images........................ 118
= Resizing Images ....................... 119
[ Trimming ................................... 120
? Adding Effects with
the My Colors Function............ 121
@ Making Dark Subjects Appear
Brighter (i-Contrast) ................. 122
] Correcting the Red-Eye Effect .. 123
Printing from the Print List
(DPOF) .................................... 124
Selecting Images for Printing
(DPOF) .................................... 125
Y
P
O
5 Getting More Out of
Your Camera ....................... 79
C
6 Using Various Functions
for Shooting Movies ........... 95
Changing the AF Frame Mode........ 80
Magnifying the Focal Point.............. 81
% Shooting with the AF Lock ........ 82
Shooting with Servo AF .................. 82
f Shooting in
Manual Focus Mode ................. 83
0 Selecting the Person to Focus On
(Face Select) ............................... 84
Changing the Metering Mode.......... 85
& Shooting with the AE Lock ........ 85
( Shooting with the FE Lock ........ 86
… Shooting with Slow Synchro ...... 86
@ Making Dark Subjects Appear
Brighter (i-Contrast) .................. 87
ΠRed-Eye Correction ................... 88
Checking for Shut Eyes .................. 89
≈ Shooting Long Exposures .......... 90
Changing the Color and Shooting... 91
L Shooting Stitch Assist Images . 94
7
(EC256)_CDI-E404_Guide_E.book Page 8 Friday, February 6, 2009 7:44 PM
Conventions Used in this Guide
8 Customizing the Camera ..129
9 Useful Information............ 139
Changing Functions.......................130
Changing Shooting Functions........134
Changing Playback Functions .......137
Changing the Start-up Image
or Sound ..................................137
Using Household Power................ 140
Changing the Strap ....................... 141
Changing the Front Cover............. 143
Troubleshooting ............................ 144
List of Messages
that Appear on the Screen ...... 147
Functions Available in Each
Shooting Mode ........................ 150
Menus ........................................... 152
Handling Precautions .................... 156
Specifications ................................ 157
Index ............................................. 160
Y
P
O
Conventions Used in this Guide
• Icons are used in the text to represent the camera buttons and switches.
• Language that displays on the screen appears inside [ ] (square
brackets).
• The directional buttons and FUNC./SET button are represented by the
following icons.
C
(Up button)
(FUNC./SET button)
(Right button)
(Left button)
(Down button)
•
: Troubleshooting tips.
•
: Hints for getting more out of your camera.
•
: Things you should be careful about.
•
: Supplemental information.
• (p. xx): Reference pages. “xx” stands for page number.
• This chapter assumes all functions are at their default settings.
8
(EC256)_CDI-E404_Guide_E.book Page 9 Friday, February 6, 2009 7:44 PM
Safety Precautions
• Before using the camera, please ensure that you read the safety precautions described
below. Always ensure that the camera is operated correctly.
• The safety precautions noted on the following pages are intended to prevent injuries to
yourself and other persons, or damage to the equipment.
• Be sure to also check the guides included with any separately sold accessories you use.
Warning Denotes the possibility of serious injury or death.
Caution
Denotes the possibility of injury.
Caution
Denotes the possibility of damage to the equipment.
Warning
Camera
Y
P
O
• Do not trigger the flash in close proximity to human eyes.
Exposure to the intense light produced by the flash may damage eyesight. In
particular, remain at least one meter (39 inches) away from infants when using the
flash.
• Store this equipment out of the reach of children and infants.
Strap: Putting the strap around a child’s neck could result in asphyxiation.
Memory card, day/date battery: Dangerous if accidentally swallowed. If this occurs,
contact a doctor immediately.
C
• Do not attempt to disassemble or alter any part of the equipment that is not
expressly described in this guide.
• To avoid the risk of injury, do not touch the interior of the camera if it has been
dropped or otherwise damaged.
• Stop operating the camera immediately if it emits smoke, a strange smell, or
otherwise behaves abnormally.
• Do not use organic solvents such as alcohol, benzine, or thinner to clean the
equipment.
• Do not allow liquids or foreign objects to enter the camera.
This could result in electrical shock or fire.
If liquid or foreign objects come into contact with the camera interior, immediately turn
the camera power off and remove the battery.
• Use only recommended power sources.
Using other power sources could result in electrical shock or fire.
• Do not use the shoulder, neck, or carabiner straps while underwater.
There is a danger of these straps becoming wrapped around the neck or otherwise
causing injury or accident. While underwater, use the wrist strap included with this
unit.
9
(EC256)_CDI-E404_Guide_E.book Page 10 Friday, February 6, 2009 7:44 PM
Safety Precautions
Battery, Battery Charger
•
•
•
•
•
•
•
•
•
Use only recommended batteries.
Do not place the battery near or in direct flame.
Do not let the battery come into contact with water (e.g. sea water) or other liquids.
Do not attempt to disassemble, alter or apply heat to the battery.
Avoid dropping or subjecting the battery to severe impacts.
This may cause explosions or leaks, resulting in fire, injury and damage to the
surroundings. In the event that a battery leaks and the eyes, mouth, skin or clothing
contacts these substances, immediately flush with water and seek medical assistance.
If the battery charger becomes wet, unplug it from the outlet and consult your camera
distributor or the closest Canon Customer Support Help Desk.
Use only the specified battery charger to charge the battery.
Do not cut, damage, alter or place heavy items on the power cord.
Unplug the power cord periodically and wipe away any dust and dirt that has
collected on the plug, the exterior of the power outlet, and the surrounding area.
Do not handle the power cord with wet hands.
This could result in electrical shock or fire.
Other Warnings
Y
P
O
• Do not play the supplied CD-ROM(s) in any CD player that does not support
data CD-ROMs.
Playing the CD-ROM(s) in an audio CD player (music player) could damage the
speakers. It is also possible to suffer hearing loss from listening with headphones to
the loud sounds of a CD-ROM played on a music CD player.
C
Caution
• Be careful not to bang the camera or subject it to strong impacts or shocks
when hanging it by the strap.
This could lead to injury or damage the camera.
• Do not use the equipment in a manner that exceeds the rated capacity of the
electrical outlet or wiring accessories. Do not use if the power cord or plug are
damaged, or not fully plugged into the outlet.
This could result in electrical shock or fire.
• Avoid using, placing or storing the camera in the following places.
- Places subject to strong sunlight.
- Places subject to temperatures above 40 °C (104 °F).
- Humid or dusty areas.
These could cause leakage, overheating or an explosion, resulting in fire, burns or
other injuries. High temperatures may also cause deformation of the casing.
• Do not allow dirt or metal objects (such as pins or keys) to contact the charger
terminals or plug.
This could result in electrical shock, fire or other damage.
• Playing back for a long time may cause feelings of discomfort.
10
(EC256)_CDI-E404_Guide_E.book Page 11 Friday, February 6, 2009 7:44 PM
Safety Precautions
Caution
• Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunctions or damage the image sensor.
• This camera cannot be used underwater at a depth greater than 10 m (33 ft.), or
in hot springs and other mineralized waters.
This may cause damage or water leakage.
• When opening the cover on the beach or in a windy area, take care that sand or
dust does not get inside the camera.
• Do not use the flash with dirt, dust or other items stuck to the surface, or if it is
covered by your fingers or clothing.
This may cause the camera to malfunction.
• Unplug the battery charger from the power outlet after recharging is complete,
or when you are not using it.
• Do not place anything, such as cloth, on top of the battery charger while it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and
distort, resulting in fire.
Y
P
O
• Remove and store the battery when you are not using the camera.
If the battery is left inside the camera, damage caused by leakage may occur.
C
• Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
• Keep the battery out of the reach of pets.
If the battery is bitten, this could cause leakage, overheating or an explosion, resulting
in fire, burns or other injuries.
• Do not sit in a chair with the camera in your pocket.
Doing so may cause malfunctions or damage the LCD monitor.
• When putting the camera in your bag, ensure that hard objects do not come into
contact with the LCD monitor.
• Do not attach accessories to the strap.
If this occurs, it may cause malfunctions or damage the LCD monitor.
11
(EC256)_CDI-E404_Guide_E.book Page 12 Friday, February 6, 2009 7:44 PM
C
12
Y
P
O
(EC256)_CDI-E404_Guide_E.book Page 13 Friday, February 6, 2009 7:44 PM
1
Getting Started
This chapter explains preparations before shooting, how to shoot in
ƒ (Auto) mode, and then how to view, erase and print the images you
Y
P
O
take. The latter part of this chapter explains how to shoot and view
movies and transfer images to a computer.
Attaching the Strap/Holding the Camera
C
• After attaching the strap to the strap mount, insert the strap mount into the
camera and turn until it clicks. There are four places on the camera where
the strap mount can be attached. To remove the strap mount, hold the
release button while turning the strap mount counterclockwise.
• Be sure to place the strap around your wrist when shooting to avoid
dropping the camera. This camera will sink in water.
• Keep your arms tight against your body while holding the camera firmly by
the sides. Be sure that your fingers do not block the flash.
Release button
Strap
13
(EC256)_CDI-E404_Guide_E.book Page 14 Friday, February 6, 2009 7:44 PM
Cautions When Using this Waterproof,
Dustproof, and Shock Resistant Camera
You can enjoy using this camera in the rain, on the beach, while skiing, or
underwater within a depth of 10 m (33 ft.). However, it can not be used in hot
springs or other mineralized waters. Please be aware that Canon is not
liable for any damage to the camera, batteries, memory cards, or saved data
caused by water leakage due to mistaken operation of the product.
This camera is subjected to Canon standard testing. However, it is not
guaranteed that this camera will not damage or malfunction. (For more
information about waterproof, dustproof, and shock resistant specifications,
see p. 157)
Cautions Before Using This Camera
• Be sure the memory card/battery and the terminal covers are fully closed.
If either of the covers are not fully closed while the camera is wet, water
may get inside the camera and cause damage (p. 19).
• Be sure that the waterproof seals inside the covers and the areas around
them are kept free from scratches and foreign objects such as sand, dirt,
or hair. Not doing so may result in leaks (pp. 18, 30). If the waterproof seal
is damaged, do not use the camera underwater.
• Avoid opening and closing the covers while on the beach or near water.
Change memory cards and batteries in a dry place protected from sea
breezes.
• Do not open the covers if the camera is wet. If there is moisture on the
camera, wipe it off with a soft, dry cloth until it is completely dry.
C
Y
P
O
Cautions While Using This Camera
• Do not use this camera in water deeper than 10 m (33 ft.).
• Do not expose the camera to strong impacts or shocks while underwater.
Impacts could cause the covers to open or otherwise compromise the
waterproof ability of the camera.
• This camera is deemed shock resistant by Canon standard testing
(p. 157). However, strong impacts could scratch the camera or cause it to
malfunction. Do not allow the camera to fall a great distance or expose it
to excessive shocks.
14
(EC256)_CDI-E404_Guide_E.book Page 15 Friday, February 6, 2009 7:44 PM
Cautions When Using this Waterproof, Dustproof, and Shock Resistant Camera
Cautions After Using This Camera and
Camera Care
• Attempting to wipe sand or dirt directly off the camera's surface may
cause scratches.
• If the camera is dirty, or if you have been
using it in water, wash it completely with fresh
water (e.g. tap water below 30 °C (86 °F)) as
soon as possible. After using this camera at
the beach it is recommended that you soak
the camera in fresh water for a few hours in
order to completely remove any salt deposits.
Be sure the memory card / battery and
terminal covers are fully closed in order to
prevent water from getting inside the camera.
• After washing the camera, dry it completely by wiping it with a soft, dry
cloth. Allowing salt to remain on the camera for long periods of time could
cause the metal parts to rust or cause the buttons to stick. After washing
and drying the camera, check that the buttons are functioning normally.
• Do not use any chemicals to clean the camera. Also, do not use silicon
grease on the waterproof seals. (Silicon grease is used on waterproof
cases for other cameras.) This may cause damage or water leakage.
• Before storing your camera, be sure that there is no sand or other foreign
objects on the waterproof seals. Foreign objects could degrade the seal
and cause water leakage and damage to the camera.
C
Y
P
O
About the Waterproof Seals
• Scratches or cracks in the waterproof seals could cause damage or leaks.
Contact the closest Canon Customer Support Help Desk for immediate
repair. The waterproof seal will be replaced on a chargeable basis.
15
(EC256)_CDI-E404_Guide_E.book Page 16 Friday, February 6, 2009 7:44 PM
Charging the Battery
Use the included charger to charge the battery.
Remove the cover.
Insert the battery.
● Align the
marks on the battery and
charger, then insert the battery by sliding it
in
and down
.
Y
P
O
Charge the battery.
● For CB-2LY: Flip out the plug
and plug
the charger into a power outlet
.
● For CB-2LYE: Plug the power cord into
the charger, then plug the other end into a
power outlet.
The charge lamp lights red and charging
starts.
● The charge lamp will light green when
charging has finished. Charging takes
approx. 1 hour and 55 minutes.
C
Remove the battery.
● Unplug the battery charger from the power
outlet, then remove the battery by sliding it
in
and up
.
To protect the battery and prolong its life, do not charge it for longer than
24 hours continuously.
16
(EC256)_CDI-E404_Guide_E.book Page 17 Friday, February 6, 2009 7:44 PM
Charging the Battery
Approximate Number of Shots That Can Be Taken
Number of shots
LCD monitor on.*
220 shots
6 hours
Playback Time (Hours)
* The number of shots that can be taken is based on the Camera & Imaging Products
Association (CIPA) measurement standard.
• Under some shooting conditions, fewer shots can be taken.
Battery Charge Indicator
An icon or message will appear on the screen indicating the battery’s charge state.
Display
Summary
Good.
Slightly depleted, but sufficient.
(Blinking red)
“Change the battery pack.”
Nearly depleted.
Y
P
O
Depleted. Recharge the battery.
Using the battery and charger effectively
• Charge the battery on the day, or the day before, it will be used.
Charged batteries continue to discharge naturally even if they are not used.
C
Attach the cover to a charged battery so that
the
mark is visible.
• How to store the battery for long periods.
Deplete and remove the battery from the camera. Attach the terminal cover and
store the battery. Storing a battery for long periods of time (about a year) without
depleting it may shorten its life span or affect its performance.
• The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use devices, such as electrical transformers for foreign travel, because they
will cause malfunctions.
• The battery may develop a bulge.
This is a normal characteristic of the battery and does not indicate a problem.
However, if the battery bulges to the point where it will no longer fit into the
camera, please contact a Canon Customer Support Help Desk.
• If the battery is quickly depleted even after charging, it has reached the
end of its life span.
Purchase a new battery.
17
(EC256)_CDI-E404_Guide_E.book Page 18 Friday, February 6, 2009 7:44 PM
Inserting the Battery and Memory Card
Insert the included battery and a memory card into the camera.
Check the card’s write-protect tab.
● If the memory card has a write-protect tab,
you will not be able to record images if the
tab is in the locked position. Slide the tab
up until you hear a click.
Open the cover.
● Using your finger or the wrist strap
fastener, move the lock in the direction of
arrow
, while simultaneously opening
the lid as shown in
.
Waterproof seal
Terminals
Y
P
O
Insert the battery.
C
● Insert the battery as shown until it locks
into place with a click.
● Be sure to insert the battery in the correct
direction or it will not properly lock into
place.
● Be careful not to damage the waterproof
seal when inserting the battery.
Insert the memory card.
● Insert the memory card as shown until it
locks into place with a click.
● Be sure the memory card is oriented
Terminals
18
correctly. Inserting the memory card in the
wrong direction could damage the
camera.
● Be careful not to damage the waterproof
seal when inserting the memory card.
(EC256)_CDI-E404_Guide_E.book Page 19 Friday, February 6, 2009 7:44 PM
Inserting the Battery and Memory Card
Close the cover.
● Press the cover closed as shown in the
figure until it clicks into place.
● Be sure the lock has returned to the
correct position as shown in the figure.
• Do not open the covers when the camera is wet or submerged in water.
If the camera is wet, wipe it off with a soft, dry cloth until it is completely
dry.
• Be sure that the waterproof seals and the areas around them are kept
free from scratches and foreign objects such as sand, dirt, or hair. Not
doing so may result in leaks (pp. 18, 30).
• Avoid opening and closing the covers while on the beach or near water.
Change memory cards and batteries in a dry place protected from sea
breezes.
Y
P
O
Removing the Battery and Memory Card
C
Remove the battery.
● Open the cover and press the battery lock
in the direction of the arrow.
The battery will pop up.
Remove the memory card.
● Push the memory card in until you hear a
click, then slowly release it.
The memory card will pop up.
19
(EC256)_CDI-E404_Guide_E.book Page 20 Friday, February 6, 2009 7:44 PM
Inserting the Battery and Memory Card
Approximate Number of Shots per Memory Card
Memory Card
2 GB
8 GB
Number of shots
626
2505
• Values are based on the default settings.
• The number of shots that can be taken will vary depending on camera settings, the
subject and the memory card used.
Can you check the number of shots that can be taken?
You can check the number of shots that can be taken when the camera is in a
Shooting Mode (p. 26).
C
Compatible Memory Cards
•
•
•
•
•
SD memory cards
SDHC memory cards
MultiMediaCard
MMCplus memory cards
HC MMCplus Card
Y
P
O
Number of shots that can be taken
What is the write-protect tab?
SD and SDHC memory cards have a write-protect tab. If this tab is in the locked
position, [Card Locked!] will appear on the screen and you will not be able to take
or erase images.
20
(EC256)_CDI-E404_Guide_E.book Page 21 Friday, February 6, 2009 7:44 PM
Setting the Date and Time
The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Turn on the camera.
● Press the power button.
The Date/Time screen will appear.
Set the date and time.
● Press the qr buttons to select an option.
● Press the op buttons to set a value.
C
Y
P
O
Make the setting.
● Press the m button.
Once the date and time have been set,
the Date/Time screen will close.
● Pressing the power button will turn off the
camera.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/
Time screen will appear each time you turn on the camera.
Daylight saving time settings
If you select
in Step 2 and press the op buttons and select
the time to daylight savings (1 hour ahead).
, you will set
21
(EC256)_CDI-E404_Guide_E.book Page 22 Friday, February 6, 2009 7:44 PM
Setting the Date and Time
Changing the Date and Time
You can change the current date and time settings.
Display the menus.
● Press the n button.
Select [Date/Time] in the 3 tab.
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Date/
Time], then press the m button.
C
Y
P
O
Change the date and time.
● Follow Steps 2 and 3 on p. 21 to adjust
the setting.
● To close the menus, press the n
button.
Date/Time battery
• The camera has a built-in date/time battery (backup battery) that allows the
date/time settings to be retained about three weeks after the battery pack has
been removed.
• By inserting a charged battery or connecting an AC adapter kit (sold separately,
p. 40) the date/time battery can be charged in about 4 hours even if the camera
is not turned on.
• If the date/time battery is depleted, the Date/Time menu will appear when you turn
the camera on. Follow the steps on p. 21 to set the date and time.
22
(EC256)_CDI-E404_Guide_E.book Page 23 Friday, February 6, 2009 7:44 PM
Setting the Display Language
You can change the language displayed in the LCD monitor menus and
messages.
Set the playback mode.
● Press the 1 button.
Display the settings screen.
● Press and hold the m button
, then
immediately press the n button
.
Y
P
O
Set the display language.
● Press the opqr buttons to select a
language, then press the m button.
Once the display language has been set,
the language menu will close.
C
What if the clock appears when the m button is pressed?
The clock will display if too much time passes between pressing the m button
and the n button in Step 2. If the clock appears, press the m button to
remove the clock and repeat Step 2.
You can also change the display language by pressing the n button,
selecting the 3 tab, and selecting the [Language] menu item.
23
(EC256)_CDI-E404_Guide_E.book Page 24 Friday, February 6, 2009 7:44 PM
Formatting Memory Cards
Before you use a new memory card or one that has been used in other
devices, you should format the card with this camera. Formatting (initializing)
a memory card erases all data on the memory card. As you cannot retrieve
the erased data, exercise adequate caution before formatting the memory
card.
Display the menus.
● Press the n button.
Select [Format].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Format],
then press the m button.
Y
P
O
Format the memory card.
C
● Press the qr buttons to select [OK], then
press the m button.
The memory card will be formatted.
When formatting has finished, the menu
screen will reappear.
Formatting or erasing data on a memory card merely changes the file
management information on the card and does not ensure its contents
are completely erased. Be careful when transferring or disposing of a
memory card. When disposing of a memory card, take precautions such
as physically destroying the card to prevent personal information leaks.
The total capacity of the memory card displayed in the formatting screen
may be less than indicated on the memory card.
24
(EC256)_CDI-E404_Guide_E.book Page 25 Friday, February 6, 2009 7:44 PM
Pressing the Shutter Button
The shutter button has two stops. To take images that are in focus, be sure
to first press the shutter button lightly (halfway) to focus, then take the shot.
Press halfway (lightly to the first
stop).
The camera focuses and automatically
selects the necessary settings for
shooting, such as the brightness.
When the camera focuses, it will beep
twice and the indicator will light green.
Y
P
O
Press fully (to the second stop).
C
The camera plays the shutter sound and
takes the shot.
● Since the shot is being taken while the
shutter sound plays, be careful not to
move the camera.
Does the length of the shutter sound change?
• Since the time required to shoot differs according to the scene you want to take,
the length of the shutter sound may change.
• If the camera or subject moves while the shutter sound is playing, the recorded
image may be blurry.
If you just press the shutter button fully without pausing halfway, the
image may not be in focus.
25
(EC256)_CDI-E404_Guide_E.book Page 26 Friday, February 6, 2009 7:44 PM
ƒ Taking Pictures
Since the camera can determine the subject and shooting conditions, you
can let it automatically select the best settings for the scene and just shoot.
The camera can also detect and focus on faces, setting the color and
brightness to optimal levels.
Check to Make Sure the Covers
are Closed.
● If either of the covers are not fully closed
while the camera is wet, water may get
inside the camera and cause damage.
Y
P
O
Turn on the camera.
● Press the power button.
The start-up sound will play, and the
startup screen will appear.
● Pressing the power button again will turn
the camera off.
C
Select the ƒ mode.
● After pressing the 4 / E button, use the
qr buttons to select ƒ and press m.
● When you point the camera toward the
26
subject, the camera will make a slight
noise as it determines the scene.
The camera focuses on the subject it
judges to be the main subject, and
displays the icon for the determined scene
in the upper left of the screen.
When faces are detected, a white frame
appears on the face of the main subject,
while gray frames appear on other
detected faces.
Even if the detected faces move, the
camera will follow the faces within a
certain range.
(EC256)_CDI-E404_Guide_E.book Page 27 Friday, February 6, 2009 7:44 PM
ƒ Taking Pictures
Compose the shot.
● Pressing the i button will zoom in on
your subject, making it appear lager.
Pressing the j button will zoom out from
your subject, making it appear smaller.
Focus.
● Press the shutter button halfway to focus.
When the camera focuses, it will beep
twice and the indicator will light green
(orange when the flash will fire).
Green AF frames appear where the
subject is in focus.
Several AF frames will appear when the
camera focuses on more than one point.
Y
P
O
Shoot.
● Press the shutter button fully.
AF Frames
C
The camera will play the shutter sound
and shoot. The flash will automatically fire
in low light conditions.
The indicator will blink green while the
image is recorded to the memory card.
The image will appear on the screen for
about two seconds.
● You can take a second picture even while
an image is displayed by pressing the
shutter button.
What if...
• The camera does not play any sounds?
Pressing the l button while turning on the camera power will turn off all
sounds except for warning sounds. To turn the sounds on, press the n
button, select the 3 tab, and then select [Mute]. Use the qr buttons to select
[Off].
27
(EC256)_CDI-E404_Guide_E.book Page 28 Friday, February 6, 2009 7:44 PM
ƒ Taking Pictures
• The image comes out dark even if the flash fired when shooting?
Your subject is too far away. When you have pressed j so that the camera is
at maximum wide angle, your shooting range is 30 cm – 3.2 m (1.0 – 10 ft.).
Your shooting range is about 30 cm – 2.0 m (1.0 – 6.6 ft.) when you have
pressed i and the camera is at maximum telephoto.
• The camera beeps once when the shutter button is pressed halfway?
Your subject is too close. When you have pressed j so that the camera is at
maximum wide angle, move about 3 cm (1.2 in.) or more away from your subject
and shoot. Move about 30 cm (1.0 ft.) or more away when you have pressed i
and the camera is at maximum telephoto.
• The lamp lights when the shutter button is pressed halfway.
To reduce red-eye and to assist in focusing, the lamp may light when shooting in
dark areas.
• The h icon blinks when you try to take an image?
When flash recharging begins, the flash icon will blink. You will be able to shoot
once charging is complete.
Scene Icons
Y
P
O
The camera displays an icon for the scene it has determined and then
automatically focuses and selects the optimum settings for subject
brightness and color.
Background
Subject
People
C
Bright
Backlit
Including Blue Skies
Backlit
Sunsets
Dark
When Using
Tripod
*
–
Subjects Other
Than People
Landscapes
*
Close Subjects
Icon Background
Color
–
Gray
Light Blue
Orange
–
Dark Blue
* Displays when the camera is attached to a tripod.
Under certain conditions, the icon that displays may not match the actual
scene. Especially when there is an orange or blue colored background (a
wall for example),
or the “Blue Skies” icons may appear and it may
not be possible to shoot with the appropriate color. If this happens, try
shooting in the G mode (p. 68). While underwater, it is recommended to
use the Underwater scene mode (p. 58).
28
(EC256)_CDI-E404_Guide_E.book Page 29 Friday, February 6, 2009 7:44 PM
1 Viewing Images
You can view your images on the screen.
Select the playback mode.
● Press the 1 button.
The last image you took will appear.
Select an image.
● Pressing the q button will cycle through
the images in reverse order.
● Pressing the r button will cycle through the
images in the order they were taken.
● The images change more quickly if you
C
keep the qr buttons pressed, but they
will appear coarse.
● After you have switched from shooting
mode to playback mode, press 1 again
to restore the shooting screen.
● Pressing the 1 button while the camera
is off, turns the camera on in playback
mode. Pressing it again turns the camera
off. Pressing the shutter button halfway in
playback mode switches the camera to
shooting mode.
Y
P
O
a Erasing Images
You can select and erase images one at a time. Please note that erased images
cannot be recovered. Exercise adequate caution before erasing an image.
Select the playback mode.
● Press the 1 button.
The last image you took will appear.
Select an image to erase.
● Press the qr buttons to display an image
to erase.
29
(EC256)_CDI-E404_Guide_E.book Page 30 Friday, February 6, 2009 7:44 PM
c Printing Images
Erase the image.
● Press the p button.
[Erase?] appears.
● Press the qr buttons to select [Erase],
then press the m button.
The displayed image will be erased.
● To exit instead of erasing, press the qr
buttons to select [Cancel], then press the
m button.
Y
P
O
c Printing Images
You can easily print the images you have taken if you connect the camera to
a PictBridge compliant printer (sold separately).
Items to Prepare
C
• Camera and PictBridge compliant printer (sold separately)
• Interface cable supplied with the camera (p. 2)
Turn off the camera and printer.
Connect the camera to the printer.
● While pressing the lock in the direction of
arrow
, open the cover in the direction
of arrow
. Insert the cable's smaller
plug as shown in the figure, making sure it
is fully inserted into the camera.
● Insert the cable’s larger plug into the
printer. For connection details, refer to the
user guide provided with the printer.
● Be careful not to damage the waterproof
seal when inserting the cable's plug.
Waterproof seal
30
EC256_01-GettingStarted.fm Page 31 Monday, February 16, 2009 11:41 AM
c Printing Images
Turn on the printer.
Turn on the camera.
● Press the 1 button to turn on the camera.
X
will appear.
Y
P
O
Select an image to print.
● Press the qr buttons to select an image
and press the 2 button.
C
X Printing will start.
● If you want to print additional images,
repeat Step 5 after printing has
completed.
● After printing has completed, turn off the
camera and printer, and unplug the
interface cable.
• Refer to the Personal Printing Guide for details on the best ways to print.
• For more information on Canon printers (sold separately) with PictBridge
support, please see pp. 38, 39.
31
(EC256)_CDI-E404_Guide_E.book Page 32 Friday, February 6, 2009 7:44 PM
E Shooting Movies
The camera can automatically select all settings so that you can shoot
movies just by pressing the shutter button.
Select the X mode.
● Press the 4 / E button, then use the qr
buttons to select E.
● Use the op buttons to select X, then
press the m button.
Shooting Time
Y
P
O
Compose the shot.
● Pressing the i button will zoom in on
C
your subject, making it appear lager.
Pressing the j button will zoom out from
your subject, making it appear smaller.
Focus.
● Press the shutter button halfway to focus.
When the camera focuses, it will beep
twice and the indicator will light green.
32
(EC256)_CDI-E404_Guide_E.book Page 33 Friday, February 6, 2009 7:44 PM
E Shooting Movies
Shoot.
● Press the shutter button fully.
Elapsed Time
Microphone
C
The camera will start shooting the movie,
and [ Rec] and the elapsed time will
appear on the screen.
● Once shooting begins, take your finger off
the shutter button.
● If you change the composition of your shot
during shooting, the focus will stay the
same, but the brightness and tone will
automatically adjust.
● Due to the waterproof casing, recording
volume will be low. You can increase volume
levels during playback to enjoy the movie.
● Do not touch or cover the microphone
during shooting. If water droplets have
gotten into the microphone, wipe them
away with a soft cloth.
● Do not press any buttons other than the
shutter button. Otherwise, the sound the
buttons make will be recorded in the movie.
Y
P
O
Stop shooting.
● Press the shutter button fully again.
The camera will beep once and stop
shooting the movie.
The indicator will blink green, and the
movie will record to the memory card.
Shooting will automatically stop when the
memory card fills.
Estimated Shooting Times
Memory Card
2 GB
8 GB
Shooting Time
23 min. 49 sec.
1 hr. 35 min. 11 sec.
• Shooting times are based on default settings. Shooting time can be checked on the
screen in Step 1.
• Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
33
(EC256)_CDI-E404_Guide_E.book Page 34 Friday, February 6, 2009 7:44 PM
1 Viewing Movies
You can view your movies on the screen.
Select the playback mode.
● Press the 1 button.
The last image you shot will appear.
appears on movies.
Select a movie.
● Press the qr buttons to select a movie,
then press the m button.
The movie control panel will appear on the
screen.
C
Y
P
O
Play the movie.
● Press the qr buttons to select
(Play),
then press the m button.
The movie will play.
● You can pause/resume the movie by
pressing the m button again.
● Press the op buttons to adjust the
volume.
● After the movie finishes,
appears.
• When watching a movie on a computer, frames may drop, it may not
play smoothly, and the audio may stop suddenly depending on the
computer’s capabilities.
• If you use the supplied software to copy the movie back onto the
memory card, you can play back the movie smoothly. For enhanced
playback you can also connect the camera to a TV.
34
(EC256)_CDI-E404_Guide_E.book Page 35 Friday, February 6, 2009 7:44 PM
Transferring Images to a Computer
You can use the included software to transfer your camera images to a
computer.
System Requirements
Even though these are recommended system requirements, not all
computer functions can be guaranteed.
Windows
OS
Computer model
CPU
RAM
Interface
Free Hard Disk
Space
Display
Macintosh
OS
Computer model
CPU
RAM
Interface
Free Hard Disk
Space
Display
Windows Vista (including Service Pack 1)
Windows XP Service Pack 2, Service Pack 3
The above OS should be pre-installed on computers with built-in
USB ports.
Viewing images Pentium 1.3 GHz or higher
Viewing movies Core2 Duo 1.66 GHz or higher
Windows Vista: 1 GB or more
Viewing images
Windows XP: 512 MB or more
Viewing movies 1 GB or more
USB
Y
P
O
Canon Utilities
C
ZoomBrowser EX: 200 MB or more
PhotoStitch: 40 MB or more
1,024 × 768 pixels or higher
Mac OS X v10.4 – v10.5
The above OS should be pre-installed on computers with built-in
USB ports.
Viewing images PowerPC G4/G5 or Intel Processor
Viewing movies Core Duo 1.66 GHz or higher
Viewing images 512 MB or more
Viewing movies 1 GB or more
USB
ImageBrowser: 300 MB or more
PhotoStitch: 50 MB or more
1,024 × 768 pixels or higher
Canon Utilities
35
(EC256)_CDI-E404_Guide_E.book Page 36 Friday, February 6, 2009 7:44 PM
Transferring Images to a Computer
Preparations
Windows XP and Mac OS X (v10.4) are used for these explanations.
Install the software.
Windows
Place the DIGITAL CAMERA Solution
Disk in the computer’s CD-ROM drive.
Begin installation.
Install the software.
● Click [Easy Installation] and follow the
Y
P
O
onscreen instructions to proceed with the
installation.
When the install finishes, click
[Restart] or [Finish].
Remove the CD-ROM.
● Remove the CD-ROM when your desktop
C
screen appears.
Macintosh
● Place the CD-ROM in the computer’s CDROM drive and double-click the
icon.
● Click [Install], and follow the onscreen
instructions to proceed with the installation.
Connect the camera to the
computer.
● Turn off the camera.
● Connect the camera to the computer as
shown in Step 2 on p. 30.
● Be careful not to damage the waterproof
Waterproof seal
36
seal when inserting the cable's plug.
(EC256)_CDI-E404_Guide_E.book Page 37 Friday, February 6, 2009 7:44 PM
Transferring Images to a Computer
Turn on the camera.
● Press the 1 button to turn on the camera.
Open CameraWindow.
Windows
● Select [Canon CameraWindow] and click
[OK].
CameraWindow will appear.
● If CameraWindow does not appear, click
the [Start] menu and select [All Programs]
or [Programs], followed by
[Canon Utilities] [CameraWindow]
[CameraWindow] [CameraWindow].
Y
P
O
Macintosh
C
CameraWindow will appear when you
establish a connection between the
camera and computer.
● If CameraWindow does not appear, click
the [CameraWindow] icon on the Dock
(the bar which appears at the bottom of
the desktop).
Transferring Images to a Computer
● Click [Transfer Untransferred Images].
All images not previously transferred will
transfer to the computer.
● After the transfer finishes, turn off the
camera and unplug the cable.
● For further operations, refer to the
Software Starter Guide.
Images transferred to the computer will be sorted by date and saved in
separate folders in the “My Pictures” folder for Windows or the “Pictures”
folder for Macintosh.
37
(EC256)_CDI-E404_Guide_E.book Page 38 Friday, February 6, 2009 7:44 PM
Accessories
Supplied with Camera
AV Cable AVC-DC400*1
Strap mount,
Wrist Strap
WS-DC8
Interface Cable IFC-400PCU*1
Battery Pack NB-6L
(with Terminal Cover)*1
C
Battery Charger
CB-2LY/CB-2LYE*1
Accessory Kits *5
Shoulder and Neck Strap Set
STP-DC1 *4 *5
Y
P
O
DIGITAL CAMERA
Solution Disk
Soft Case SD-DC70 *4 *5
Carabiner Strap
STP-DC2 *4 *5
Front Cover Set
FC-DC1*5
*1 Also available for purchase separately.
*2 See the user guide supplied with the printer for more information on the printer and
interface cables.
*3 The power cords and adapters in accessory packs ACK-DC10 and ACK-DC30 are
also compatible for this camera. (DC Couplers are not used on this camera.)
*4 Cannot be used underwater.
*5 May not be available in all regions. A general accessory kit containing the strap, cover,
and soft case sets may be available depending on location.
38
(EC256)_CDI-E404_Guide_E.book Page 39 Friday, February 6, 2009 7:44 PM
Accessories
Video IN Terminal
Audio IN Terminal
TV/Video
Inkjet Printers*2
(PIXMA series)
Memory Card
High-Power
HF-DC1 *4
C
Y
P
O
Card Reader
AC Adapter Kit ACK-DC40 *3 *4
DC Coupler
DR-40
Compact Power Adapter
CA-DC10
Compact Photo
Printers*2
(SELPHY series)
Windows/
Macintosh
Power Cord
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used with genuine
Canon accessories. Canon shall not be liable for any damage to this product and/or
accidents such as fire, etc., caused by the malfunction of non-genuine Canon
accessories (e.g., a leakage and/or explosion of a battery pack). Please note that this
warranty does not apply to repairs arising out of the malfunction of non-genuine Canon
accessories, although you may request such repairs on a chargeable basis.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO LOCAL REGULATION.
39
(EC256)_CDI-E404_Guide_E.book Page 40 Friday, February 6, 2009 7:44 PM
Separately Sold Accessories
The following camera accessories are sold separately.
Some accessories are not sold in some regions, or may no longer be
available.
Power Supplies
• AC Adapter Kit ACK-DC40
This kit lets you power the camera using household power. Recommended for
powering the camera for an extended period of time or when connecting to a
computer. Cannot be used to charge the battery inside the camera.
• Battery Charger CB-2LY/CB-2LYE
An adapter for charging Battery Pack NB-6L.
• Battery Pack NB-6L
Rechargeable lithium-ion battery.
Y
P
O
The battery charger can also be used when abroad.
The charger can be used in regions that have 100 – 240 V (50/60 Hz) AC power.
If the plug does not fit the outlet, use a commercially available plug adapter. Do
not use devices such as electrical transformers for foreign travel because they will
cause malfunctions.
Other Accessories
C
• Shoulder and Neck Strap Set STP-DC1
A shoulder and neck strap set easily attachable to the camera.
• Carabiner Strap STP-DC2
A carabiner strap easily attachable to the camera.
• Front Cover Set FC-DC1
You can change the color of your camera's front cover. This set comes with
three different colored covers and an installation tool.
• High-Power Flash HF-DC1
This attachable supplementary flash can illuminate subjects that are too distant
for the light from the built-in flash to reach.
40
(EC256)_CDI-E404_Guide_E.book Page 41 Friday, February 6, 2009 7:44 PM
2
Learning More
This chapter explains the parts of the camera and what displays on
the screen, as well as the basic operating instructions.
C
Y
P
O
41
(EC256)_CDI-E404_Guide_E.book Page 42 Friday, February 6, 2009 7:44 PM
Components Guide
Shutter Button (p. 25)
Power Button
Flash (pp. 60, 68)
Speaker
Tripod Socket
Memory Card / Battery Cover (p. 18)
Memory Card / Battery Cover Lock
(p. 18)
Strap Mount (p. 13)
Lamp (AF Assist Beam (p. 134)/
Red-Eye Reduction Lamp (p. 134)/
Self-Timer Lamp (p. 65))
Microphone (p. 33)
Lens
Release button (p. 13)
C
Y
P
O
4 (Shooting) / E (Movie) Button
Use the 4 / E button and the qrop buttons to change the shooting
mode.
Auto Mode (ƒ)
You can leave it to the camera to select
settings (p. 26).
Program AE mode (G)
You can set various functions in order to take
the picture you want (p. 68).
Special Scene Mode (K)
The camera can automatically select all
settings appropriate for the conditions so that
you can take images just by pressing the
shutter button (p. 56).
Movie Mode (E)
For shooting movies (p. 32).
42
(EC256)_CDI-E404_Guide_E.book Page 43 Friday, February 6, 2009 7:44 PM
Components Guide
Y
P
O
2 (Direct Print) Button
(pp. 30, 124, 136)
4 / E (Shooting/Movie) Button (p. 79)
1 (Playback) Button (pp. 29, 101)
Screen (LCD Monitor) (p. 44)
Waterproof seal (p. 18)
Indicator (p. 46)
DC IN Terminal
A/V OUT (Audio/Video Output) and
DIGITAL Terminal (pp. 30, 35, 109)
Waterproof seal (p. 30)
Terminal Cover (p. 30)
Terminal Cover Lock (p. 30)
Zoom Button
Shooting: i (Telephoto) (p. 27)
Playback: k (Magnify) (p. 108)
C
Zoom Button
Shooting: j (Wide Angle) (p. 27)
Playback: g (Index) (p. 102)
b (Exposure) (p. 72)/
d (Jump) (p. 103)/ o Button
e (Macro) (p. 69)/u (Infinity) (p. 69)/
f Manual Focus (p. 83)/ q Button
m FUNC./SET (Function/Set) Button
(p. 47)
h (Flash) (pp. 60, 68)/ r Button
Q (Self-Timer) (pp. 64, 65, 76, 77)/
a (Single Image Erase) (p. 29)/
p Button
l (Display) Button (pp. 44, 45)
n Button (p. 48)
1 (Playback) Button
Press this button while in shooting mode to switch between playback mode
and shooting mode. Press this button while the camera is turned off to switch
between playback mode and off mode.
Shooting
Mode
1
Playback
Mode
1
Power off
43
(EC256)_CDI-E404_Guide_E.book Page 44 Friday, February 6, 2009 7:44 PM
Information Displayed on the Screen
Shooting (Information Display)
ISO Speed (p. 73)
White Balance (p. 74)
My Colors (p. 75)
Metering Modes (p. 85)
Drive Mode (p. 72)
Image Quality
(Compression) (p. 70)
Recording Pixels (p. 70)
Digital Zoom
Magnification (p. 61),
Digital Tele-Converter
(p. 62)
Macro (p. 69), Infinity
(p. 69), Manual Focus
(p. 83)
Flash Mode
(pp. 60, 68, 86)
Red-Eye Correction
(p. 88)
Self-Timer
(pp. 64, 65, 76, 77)
Camera Orientation*
Battery Charge Indicator
(p. 17)
Shooting Mode
AF Frame (p. 27),
AE Point Frame (p. 85)
AF Lock (p. 82)
Time Zone (p. 131)
AE Lock (p. 85),
FE Lock (p. 86)
C
*
i-Contrast (p. 87)
Image Stabilizer (p. 136)
Still Images: Recordable
shots (pp. 20, 71)
Movies: Remaining Time
(pp. 33, 97)
Disp. Overlay (p. 135)
Shutter Speed
Aperture Value
Exposure Compensation
(p. 72)
Date Taken/Recorded
(p. 63)
Create Folder (p. 132)
Y
P
O
: Standard,
: Held vertically
When shooting, the camera detects if it is held vertically or horizontally, and
adjusts settings accordingly for the best shot. It also detects orientation during
playback, so you can hold the camera in either orientation and it will
automatically rotate images for correct viewing.
This function may not operate correctly when the camera is pointed straight up
or down.
Switching the Display
You can change the display using the l button.
No Information Display
44
Information Display
(EC256)_CDI-E404_Guide_E.book Page 45 Friday, February 6, 2009 7:44 PM
Information Displayed on the Screen
Playback (Detailed Information Display)
Print List (p. 124)
My Category (p. 116)
Shooting Mode
Shutter Speed
Exposure Compensation
(p. 72)
White Balance (p. 74)
Histogram (p. 46)
Image Editing
(pp. 119 –123)
Image Quality
(Compression) (p. 70),
(Movies) (p. 96)
Recording Pixels (p. 70)
Battery Charge Indicator
(p. 17)
Metering Modes (p. 85)
Folder Number - File
Number (p. 132)
Displayed Image
Number /Total Number
of Images
ISO Speed (p. 73)
Aperture Value, Image
Quality (Movies) (p. 96)
i-Contrast (pp. 87, 122)
Flash Sync (p. 68)
C
Macro (p. 69),
Infinity (p. 69),
Manual Focus (p. 83)
File Size (pp. 70, 96)
Still Images: Recording
Pixels (p. 70)
Movies: Movie Length
(p. 97)
Protect (p. 114)
My Colors (pp. 75, 121)
Red-Eye Correction
(pp. 88, 123)
Shooting Date and Time
(p. 63)
Y
P
O
Switching the Display
You can change the display using the l button.
No Information
Display
Simple Information
Display
Detailed Information
Display
Focus Check
Display (p. 107)
You can also switch the display by pressing the l button while the
image displays shortly after shooting. However, the Simple Information
will not display.
45
(EC256)_CDI-E404_Guide_E.book Page 46 Friday, February 6, 2009 7:44 PM
Information Displayed on the Screen
Display in Dark Conditions during Shooting
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual
image recorded may be different. Screen noise may appear and the
movement of the subject may appear somewhat jagged on the screen. This
has no effect on the recorded image.
Overexposure Warning during Playback
In “Detailed Information Display” (p. 45), overexposed areas of the image
flash on the screen.
Histogram during Playback
High
● The graph that appears in “Detailed
Low
Dark
Bright
Indicator
C
Y
P
O
Information Display” (p. 45) is called the
histogram. The histogram shows the
distribution and amount of brightness of
an image. When the graph approaches
the right side, the image is bright, but
when it approaches the left side, the
image is dark, and in this way you can
judge the exposure.
The indicator on the back of the camera (p. 43) will light or blink under the
following conditions.
Colors
Green
Orange
Status
Lights
Blinks
Lights
Blinks
Operation Status
Shooting preparation complete (p. 27)/Display Off (p. 130)
Recording/reading/transmitting image data (p. 27)
Shooting preparation complete (flash on) (p. 27)
Camera shake warning (p. 60)
When the indicator blinks green, data is being recorded to/read from the
memory card or various information is being transmitted. Do not turn off
the power, open the memory card slot/battery cover, shake or jolt the
camera. These actions may corrupt the image data or cause the camera
or memory card to malfunction.
46
(EC256)_CDI-E404_Guide_E.book Page 47 Friday, February 6, 2009 7:44 PM
m FUNC. Menu – Basic Operations
Commonly used shooting functions can be set with the FUNC. menu. The
menu and menu items differ depending on the shooting mode (p. 150).
Select a shooting mode.
● Press the 4 / E button, then use the qr
buttons to select the desired shooting
mode. Then press the m button.
● When K or E is selected, use the
op buttons to select the desired
shooting mode. Then press the m button.
Display the FUNC. menu.
Press the m button.
Y
P
O
Select a menu item.
C
Selectable Options
Menu Items
● Press the op buttons to select a menu
item.
The selectable settings for the menu item
appear at the lower part of the screen.
Select an option.
● Press the qr buttons to select an option.
● You can also select settings by pressing
the l button on options that display
.
Make the setting.
● Press the m button.
The shooting screen will reappear and the
setting you selected will display on the
screen.
47
(EC256)_CDI-E404_Guide_E.book Page 48 Friday, February 6, 2009 7:44 PM
n Menu – Basic Operations
Various functions can be set from the menus. The menu items are organized
under tabs, such as for shooting (4) and playback (1). The menu items
differ depending on the mode (pp. 152 – 155).
Display the menu.
● Press the n button.
Select a tab.
● Press the qr buttons, or press the zoom
button (p. 43) to select a tab (category).
Y
P
O
Select a menu item.
● Press the op buttons to select a menu
item.
● Some items require you to press the m
C
button to display a submenu in which you
change the setting.
Select an option.
● Press the qr buttons to select an option.
Make the setting.
● Press the n button.
● The standard screen will reappear.
48
(EC256)_CDI-E404_Guide_E.book Page 49 Friday, February 6, 2009 7:44 PM
Changing the Sound Settings
You can silence or adjust the volume of camera sounds.
Muting Sounds
Display the menu.
● Press the n button.
Select [Mute].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Mute],
then use the qr buttons to select [On].
Y
P
O
Adjusting the Volume
Display the menu.
C
● Press the n button.
Select [Volume].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Volume],
then press the m button.
Change the volume.
● Press the op buttons to select an item,
then use the qr buttons to adjust the
volume.
49
(EC256)_CDI-E404_Guide_E.book Page 50 Friday, February 6, 2009 7:44 PM
Changing the Screen Brightness
The screen brightness can be changed in two ways.
With the n Button
Display the menu.
● Press the n button.
Select [LCD Brightness].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [LCD
Brightness].
Change the brightness.
● Press the qr buttons to change the
Y
P
O
brightness.
● Press the n button again to complete
the setting.
With the l Button
● Press the l button for more than one
C
second.
The screen increases to maximum
brightness regardless of the setting in the
3 tab.
● Pressing the l button again for more
than one second will return the screen to
the original brightness.
• The next time you turn on the camera, the screen will be at the
brightness setting selected in the 3 tab.
• When you have set the brightness to its highest setting in the 3 tab, you
cannot change the brightness with the l button.
50
(EC256)_CDI-E404_Guide_E.book Page 51 Friday, February 6, 2009 7:44 PM
Returning the Camera to Default Settings
When you have mistakenly changed a setting, you can reset the camera to
the default settings.
Display the menu.
● Press the n button.
Select [Reset All].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Reset
All], then press the m button.
Y
P
O
Reset the settings.
● Press the qr buttons to select [OK], then
C
press the m button.
The camera will reset to the default
settings.
Are there functions that cannot be reset?
• The [Date/Time] (p. 21) in the 3 tab, [Language] (p. 23), [Video System]
(p. 109), [Time Zone] (p. 131), the image registered as [Start-up Image] (p. 137).
• The saved data for custom white balance (p. 74).
• Colors that were selected in Color Accent (p. 91) or Color Swap (p. 92).
51
(EC256)_CDI-E404_Guide_E.book Page 52 Friday, February 6, 2009 7:44 PM
Low Level Memory Card Formatting
Perform low level formatting when you think that the recording/reading
speed of a memory card has dropped. Low level formatting a memory card
completely erases all data on the memory card. As you cannot retrieve the
erased data, exercise adequate caution before formatting the memory card.
Display the menu.
● Press the n button.
Select [Format].
● Press the qr buttons to select the 3 tab.
● Press the op buttons to select [Format],
then press the m button.
Perform the low level format.
Y
P
O
● Press the op buttons to select [Low
Level Format], then use the qr buttons to
display
.
● Press the opqr buttons to select [OK],
then press the m button.
Low level formatting starts.
C
About low level formatting
When the [Memory card error] message appears, or when the camera does not
work correctly, low level formatting the memory card may solve the problem.
Copy the images from the memory card to a computer or other device before low
level formatting.
• Low level formatting may take longer than standard formatting (p. 24),
since all recorded data are erased.
• You can stop a low level format of a memory card by selecting [Stop].
When stopping low level formatting, the data will be erased but the
memory card can be used without problem.
52
(EC256)_CDI-E404_Guide_E.book Page 53 Friday, February 6, 2009 7:44 PM
Power Saving Function (Auto Power Down)
To save battery power, the camera shuts down automatically when it is not
operated for a certain time.
Power Saving during Shooting
The monitor will turn off approximately 1 minute after the camera is last
operated, and the indicator on the back of the camera lights green. After
about 2 more minutes, the power will turn off. If the monitor is turned off but
the indicator is still green, pressing the shutter button halfway (p. 25) turns
on the monitor and shooting can continue.
Power Saving during Playback
The power will turn off approximately 5 minutes after the camera is last
operated.
• You can turn off the Power Saving Function (p. 130).
• You can adjust the time before the monitor turns off (p. 130).
Y
P
O
Clock Functions
You can check the current time.
C
● Hold the m button pressed.
A screen like that on the left appears
showing the current time.
● You can change the display color by
changing the camera’s orientation and
pressing the qr buttons.
● Press the m button to cancel the clock
display.
Press and hold the m button, then press the power button to display the
clock.
53
(EC256)_CDI-E404_Guide_E.book Page 54 Friday, February 6, 2009 7:44 PM
C
54
Y
P
O
(EC256)_CDI-E404_Guide_E.book Page 55 Friday, February 6, 2009 7:44 PM
3
Shooting in Special
Conditions and Commonly
Used Functions
Y
P
O
This chapter explains how to shoot in different conditions, as well as
how to use other common functions, such as the flash and self-timer.
C
• When you select a mode that matches a particular set of conditions, the
camera will automatically select any necessary settings. All you need do
is press the shutter button to take an optimized picture.
• This chapter assumes the mode is set to ƒ (Auto) for “! Turning the
Flash Off” (p. 60) to “" Using the Face Self-Timer” (p. 65).
55
(EC256)_CDI-E404_Guide_E.book Page 56 Friday, February 6, 2009 7:44 PM
K Shooting in Various Conditions
The camera will select the necessary settings for the conditions in which you
wish to shoot when you select the matching mode.
Select the shooting mode.
● After pressing the 4 / E button, use the
qr buttons to select K.
Select the desired shooting mode.
● Use the op buttons to select a shooting
mode, then press the m button.
● The default setting is w.
Y
P
O
Shoot.
C
I Take portraits (Portrait)
● Produces a soft effect when
photographing people.
JTake landscapes (Landscape)
● For shooting majestic landscapes.
56
(EC256)_CDI-E404_Guide_E.book Page 57 Friday, February 6, 2009 7:44 PM
K Shooting in Various Conditions
F Take snapshots at night
(Night Snapshot)
● Lets you take beautiful snapshots of
people against city nightscapes or night
backgrounds.
● If you hold the camera firmly, you can take
pictures with reduced camera shake, even
without a tripod.
V Take shots of kids and pets
(Kids&Pets)
● Lets you capture subjects that move
Y
P
O
around, such as children and pets, without
missing photo opportunities.
H Take indoor shots (Indoor)
● Lets you shoot indoors with natural colors.
C
U Shoot sunsets (Sunset)
● Lets you take shots of sunsets in vivid
colors.
t Take shots of fireworks
(Fireworks)
● Lets you take shots of fireworks in vivid
colors.
57
(EC256)_CDI-E404_Guide_E.book Page 58 Friday, February 6, 2009 7:44 PM
K Shooting in Various Conditions
w Take shots of people at the beach
(Beach)
● Lets you take bright shots of people on
sandy beaches where the reflected
sunlight is strong.
S Shoot underwater (Underwater)
● For shooting underwater landscapes and
creatures with natural tones.
Y
P
O
y Take shots of aquatic life in an
aquarium (Aquarium)
● Lets you take natural-colored shots of
aquatic life in indoor aquariums.
C
O Take shots of foliage (Foliage)
● Lets you shoot trees and leaves, such as
new growth, autumn leaves or blossoms,
in vivid colors.
P Take shots of people in snow
(Snow)
● Lets you take bright, natural-colored shots
of people against snowy backgrounds.
58
(EC256)_CDI-E404_Guide_E.book Page 59 Friday, February 6, 2009 7:44 PM
K Shooting in Various Conditions
Z Shoot using high ISO speed
(ISO3200)
● Sets the ISO speed to 3200, and lets you
shoot without camera shake or subject
blurring even in low light conditions.
● Recording pixels are set to
(1600 ×
1200 pixels, p. 70).
• In F, V, H, S or y mode, images may appear coarse because the
ISO speed (p. 73) is increased to match the shooting conditions.
• In t mode, attach the camera to a tripod to prevent the camera from
moving and blurring the image. Additionally, you are recommended to
set [IS Mode] to [Off] (p. 136).
• In Z mode, images may appear coarse.
C
Y
P
O
59
(EC256)_CDI-E404_Guide_E.book Page 60 Friday, February 6, 2009 7:44 PM
! Turning the Flash Off
You can shoot with the flash turned off.
Press the r button.
Select !.
● Press the qr buttons to select !, then
press the m button.
! will appear on the screen.
● Follow the steps above to return the
setting to
.
C
Y
P
O
What if the indicator blinks orange and a flashing
appears?
When you press the shutter button halfway in low light conditions where camera
shake is likely, the indicator will blink orange and a flashing
will appear on the
screen. Attach the camera to a tripod to prevent it from moving.
60
(EC256)_CDI-E404_Guide_E.book Page 61 Friday, February 6, 2009 7:44 PM
Zooming in More Closely on Subjects
(Digital Zoom)
You can use the digital zoom to zoom up to a maximum of 12x and capture
subjects that are too far away for the optical zoom (p. 27) to enlarge. The
images may appear coarse, however, depending on the recording pixel
setting (p. 70) and the zoom factor used.
Press the i button.
● Hold the i button until zooming stops.
When you release the i button, the
largest possible zoom factor without
image deterioration, and
will appear.
Press the i button again.
Y
P
O
The digital zoom will further zoom in on
the subject.
C
Zoom Factors at which Images Deteriorate
Recording Pixels
Optical Zoom
Digital Zoom
3.0x
3.7x
4.6x
7.5x
12x
: No image deterioration (zoom factor appears white)
: Image deterioration (zoom factor appears blue)
: Maximum zoom factor without deterioration (Safety Zoom)
Turning off the digital zoom
To turn off the digital zoom, press the n button, select the 4 tab, and select
[Digital Zoom] and the [Off] option.
The focal length when using digital zoom is 105 – 420 mm (35mm film
equivalent).
61
(EC256)_CDI-E404_Guide_E.book Page 62 Friday, February 6, 2009 7:44 PM
Zooming in More Closely on Subjects (Digital Zoom)
Digital Tele-Converter
The focal length of the lens can be increased by an equivalent of 1.5x or
2.0x. This enables a faster shutter speed and less chance of camera shake
than the zoom (including digital zoom) used by itself at the same zoom
factor.
The images may appear coarse, however, depending on the combination of
recording pixel (p. 70) and digital tele-converter settings used.
Select [Digital Zoom].
● Press the n button.
● Press the qr buttons to select the 4 tab,
then press the op buttons to select
[Digital Zoom].
Y
P
O
Accept the setting.
● Press the qr buttons to select [1.5x] or
[2.0x].
● Pressing the n button will restore the
shooting screen.
The view will be enlarged, and
and the
zoom factor will display on the screen.
● To return to standard digital zoom, select
[Digital Zoom] and the [Standard] option.
C
Combinations that Cause Image Deterioration
• Using [1.5x] at a recording pixel setting of
or
will cause image
deterioration (
and the zoom factor will display in blue).
• Using [2.0x] at a recording pixel setting of
,
or
will cause image
deterioration (
and the zoom factor will display in blue).
• The respective focal lengths when using [1.5x] and [2.0x] are 52.5 –
157.5 mm and 70 – 210 mm (35mm film equivalent).
• The digital tele-converter cannot be used together with the digital zoom.
62
(EC256)_CDI-E404_Guide_E.book Page 63 Friday, February 6, 2009 7:44 PM
Inserting the Date and Time
You can insert the shooting date and time in the lower right corner of an
image. Once inserted, however, they cannot be deleted. Be sure to check
beforehand that the date and time are correctly set (p. 21).
Select [Date Stamp].
● Press the n button.
● Press the qr buttons to select the 4 tab,
then press the op buttons to select
[Date Stamp].
Accept the setting.
● Use the qr buttons to select [Date] or
[Date & Time].
Y
P
O
● Pressing the n button will restore the
shooting screen.
[DATE] will appear on the screen.
Shoot.
C
You can insert the shooting date and time
in the image’s lower right corner.
● To restore to the original setting, select
[Off] in Step 2.
Inserting and printing the date and time in images which do
not have an embedded date and time
• Use the DPOF print settings (p. 125) to print.
• Use the included software to print.
Refer to the Software Starter Guide for details.
• Connect the camera to a printer to print.
Refer to the Personal Printing Guide for details.
63
(EC256)_CDI-E404_Guide_E.book Page 64 Friday, February 6, 2009 7:44 PM
Ò Using the Self-Timer
The self-timer can be used to shoot a group photo that includes the camera
operator. The camera will activate approximately 10 seconds after the
shutter button is pressed.
Press the p button.
Select Ò.
● Press the op buttons to select Ò, then
press the m button.
Once set, Ò will appear.
C
Y
P
O
Shoot.
● Press the shutter button halfway to focus
on the subject, then press it fully. To
cancel shooting after the self-timer has
already started, press Q.
When the self-timer starts, the lamp blinks
and the self-timer sound plays.
Two seconds before the shutter releases,
the lamp and sound speed up (the lamp
remains lit when the flash will fire).
● To restore the original setting, select
in Step 2.
You can change the delay time and number of shots (p. 77).
64
(EC256)_CDI-E404_Guide_E.book Page 65 Friday, February 6, 2009 7:44 PM
" Using the Face Self-Timer
Once you compose the shot, such as for a group photo, and press the
shutter button, the camera will take three shots in a row two seconds after it
detects your face (p. 80) when you enter the composition.
Select ".
● Follow Step 2 on p. 64 and select ".
Compose the shot and press the
shutter button halfway.
● Make sure a green frame appears on the
face of the focused subject and white
frames appear on other faces.
Y
P
O
Press the shutter button fully.
C
The camera will enter shooting stand-by,
and [Look straight at camera to start count
down] will appear on the screen.
The lamp will blink and the self-timer
sound will play.
Join the subjects and look at the
camera.
When the camera detects a new face, the
lamp and sound will speed up (the lamp
remains lit when the flash will fire), and
two seconds later the shutter will release.
The second and third shots will continue in
succession.
● To restore the original setting, select
in Step 2 on p. 64.
What if a face is not detected?
Even if your face is not detected after joining the subjects, the shutter will release
approximately 30 seconds later.
Changing the number of shots
For the screen in Step 1, press the n button, then press the qr buttons to
change the number of shots. Press the m button to accept the setting.
65
(EC256)_CDI-E404_Guide_E.book Page 66 Friday, February 6, 2009 7:44 PM
C
66
Y
P
O
(EC256)_CDI-E404_Guide_E.book Page 67 Friday, February 6, 2009 7:44 PM
4
Selecting Settings Yourself
In this chapter you will learn how to use the various functions in G
mode to progressively advance your shooting skills.
C
Y
P
O
• This chapter assumes that the shooting mode is set to G.
• G stands for Program AE.
• Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 150 – 153).
67
(EC256)_CDI-E404_Guide_E.book Page 68 Friday, February 6, 2009 7:44 PM
G Shooting in Program AE
You can select the settings for various functions to suit your preferences. AE
stands for Auto Exposure.
Select the shooting mode.
● After pressing the 4 / E button, use the
qr buttons to select G and press m.
Adjust the settings according to
your purposes (pp. 68 – 77).
Shoot.
Y
P
O
What if the shutter speed and aperture value are displayed
in red?
If a correct exposure cannot be obtained when pressing the shutter button
halfway, the shutter speed and aperture value display in red. Try the following
settings to obtain the correct exposure.
• Turn on the flash (p. 68)
• Select a higher ISO speed (p. 73)
C
h Turning the Flash On
You can make the flash fire every time you shoot. At maximum wide angle,
the flash range is approximately 30 cm – 3.2 m (1.0 – 10 ft.), and at
maximum telephoto, it is 30 cm – 2.0 m (1.0 – 6.6 ft.).
Select h.
● After pressing the r button, press the qr
buttons to select h, then press the m
button.
Once set, h will appear.
68
(EC256)_CDI-E404_Guide_E.book Page 69 Friday, February 6, 2009 7:44 PM
e Shooting Close-ups (Macro)
You can shoot an object at a close distance or even shoot extreme closeups of it.
The possible shooting range is approximately 3 – 50 cm (1.2 in. – 1.6 ft.)
from the end of the lens when the j button is pressed and the camera is at
maximum wide angle, and approximately 30 – 50 cm (1.0 – 1.6 ft.) when the
i button is pressed to maximum telephoto.
Select e.
● After pressing the q button, press the qr
buttons to select e, then press the m
button.
Once set, e will appear.
Using Î
Y
P
O
You are recommended to attach the camera to a tripod and shoot in Î, to prevent
the camera from moving and blurring the image (p. 76).
C
The edges of the image may darken if the flash fires.
u Shooting Far Away Subjects (Infinity)
You can shoot landscapes and far away subjects. The focusing range is 3 m
(9.8 ft.) and greater from the camera.
Select u.
● After pressing the q button, press the qr
buttons to select u, then press the m
button.
Once set, u will appear.
69
(EC256)_CDI-E404_Guide_E.book Page 70 Friday, February 6, 2009 7:44 PM
Changing the Recording Pixels
You can select the recording pixels (image size) from six settings.
Select the recording pixels.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
The setting you selected will display on
the screen.
If you select
, you cannot use the Digital Zoom (p. 61) or Digital TeleConverter (p. 62).
Y
P
O
Changing the Image Quality
(Compression Ratio)
C
You can select from the following two levels of image quality:
(Fine),
(Normal).
Select the image quality.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
The setting you selected will display on
the screen.
70
(EC256)_CDI-E404_Guide_E.book Page 71 Friday, February 6, 2009 7:44 PM
Changing the Image Quality (Compression Ratio)
Approximate Values for Recording Pixels and Image Quality
Recording Pixels
Compression
Ratio
Single Image
Data Size
(Approx. KB)
Number of Recordable Images
2 GB
8 GB
(Large)
12 M/4000 × 3000
3084
626
2505
1474
1280
5116
(Medium 1)
8 M/3264 × 2448
2060
930
3721
980
1920
7675
(Medium 2)
5 M/2592 × 1944
1395
1365
5457
695
2672
10679
(Medium 3)
2 M/1600 × 1200
558
3235
12927
278
6146
24562
150
10245
40937
(Small)
0.3 M/640 × 480
(Widescreen)
4000 × 2248
Y
P
O
84
15368
61406
2311
830
3318
1105
1707
6822
• The values in the table are measured according to Canon standards and may change
depending on the subject, memory card and camera settings.
C
Approximate Values for Paper Size
A2
A3
●
Suitable for sending images as e-mail
attachments.
●
For printing on wide size paper.
A4, Letter size
5" × 7"
Postcard size
3.5" × 5"
71
(EC256)_CDI-E404_Guide_E.book Page 72 Friday, February 6, 2009 7:44 PM
b Adjusting the Brightness
(Exposure Compensation)
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of –2 to +2.
Select the exposure
compensation.
● After pressing the o button, press the qr
buttons to adjust the exposure
compensation, then press the m button.
The compensation range you set will
display on the screen.
Y
P
O
W Continuous Shooting
You can shoot continuously at about 1.1 images/second.
Select the drive mode.
C
● After pressing the m button, press the
op buttons to select
.
Select W.
● Press the qr buttons to select W, then
press the m button.
Once set, W will appear on the screen.
Shoot.
As long as you hold the shutter button
down, the camera will shoot successive
images.
• Cannot be used with the self-timer (pp. 64, 65, 76, 77).
• For continuous shooting, the focus and exposure are locked when the
shutter button is pressed halfway.
• As the number of images increases, the shooting intervals may take
longer.
• If the flash fires, shooting intervals may take longer.
72
(EC256)_CDI-E404_Guide_E.book Page 73 Friday, February 6, 2009 7:44 PM
Changing the ISO Speed
Select the ISO speed.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
The setting you selected will display on
the screen.
Approximate Values for ISO Speed
Automatically adjusts the ISO speed to the shooting mode and shooting
conditions.
Y
P
O
Low Fine weather conditions, outdoor shooting.
Cloudy, Twilight
High Nightscapes, Dark interiors
Changing the ISO speed
C
• Lowering the ISO speed results in sharper images, but there may be an
increased chance of image blurring in certain shooting conditions.
• Raising the ISO speed results in a faster shutter speed, reducing camera shake
and letting the flash reach greater distances to the subject. The images,
however, will appear coarse.
• When the camera is set to
, you can press the shutter button halfway
to display the automatically set ISO speed.
• With ISO3200 you can set an even faster speed (p. 59).
73
(EC256)_CDI-E404_Guide_E.book Page 74 Friday, February 6, 2009 7:44 PM
Adjusting the White Balance
The white balance (WB) function sets the optimal white balance for natural
looking colors.
Select the white balance.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
The setting you selected will display on
the screen.
Auto
Y
P
O
Automatically sets the optimal white balance for the shooting
conditions.
Day Light
Fine weather conditions, outdoor shooting
Cloudy
Cloudy, shady, twilight conditions
Tungsten
Tungsten, bulb-type (3-wavelength) fluorescent lighting
Warm-white fluorescent, cool-white fluorescent, warm-white-type
Fluorescent
(3-wavelength) fluorescent lighting
Daylight fluorescent, daylight-type (3-wavelength) fluorescent
Fluorescent H
lighting
Sets the optimum white balance for taking pictures underwater.
Underwater
Reduces blue tones to produce natural, vibrant hues.
Custom
C
Manually sets a custom white balance.
Custom White Balance
You can adjust the white balance to the light source at the shooting location.
Make sure that you set the white balance under the lighting conditions of the
shooting scene.
● In Step 2 above, select
.
● Make sure the entire screen is filled with
the white subject, then press the l
button.
The tint on the screen will change when a
white balance data is set.
74
(EC256)_CDI-E404_Guide_E.book Page 75 Friday, February 6, 2009 7:44 PM
Changing the Tone of an Image (My Colors)
You can change the tone of an image to sepia or black and white when
shooting.
Select My Colors.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
The setting you selected will display on
the screen.
● After shooting, return the setting to
.
My Colors Off
Vivid
Neutral
Sepia
B/W
Positive Film
Y
P
O
–
Emphasizes the contrast and color saturation for a vivid
impression.
Tones down the contrast and color saturation for neutral
hues.
C
Sepia tones.
Black and white.
Like the Vivid Red, Vivid Green or Vivid Blue effects,
produces intense natural appearing colors like those
obtained with positive film.
Lighter Skin Tone
Makes skin tones lighter.
Darker Skin Tone
Makes skin tones darker.
Vivid Blue
Vivid Green
Emphasizes blue tints. Makes the sky, ocean and other
blue subjects more vivid.
Emphasizes green tints. Makes mountains, foliage and
other green subjects more vivid.
Vivid Red
Emphasizes red tints. Makes red subjects more vivid.
Custom Color
You can adjust contrast, sharpness, and color saturation
etc. to your preference.
• The white balance cannot be set in the
and
modes (p. 74).
• In the
and
modes, colors other than people’s skin color may
change. You may not obtain the expected results with some skin colors.
75
(EC256)_CDI-E404_Guide_E.book Page 76 Friday, February 6, 2009 7:44 PM
Changing the Tone of an Image (My Colors)
Custom Color
The contrast, sharpness, color saturation, red, green, blue, and skin tones in
an image can be selected and set from 5 different levels.
● Follow Step 2 on page 75 and select
,
then press the l button.
● Press the op buttons to select an option,
then use the qr buttons to select a value.
● The more to the right, the stronger/deeper
the effect gets, the more to the left, the
weaker/lighter the effect gets.
● Press the l button to accept the
setting.
Y
P
O
Î Shooting Using the Two Second
Self-Timer
You can set the self-timer to a delay of approximately two seconds.
C
Select Î.
● After pressing the p button, press the
op buttons to select Î, then press the
m button.
● Once set, Î will appear.
● Follow Step 3 in “Ò Using the Self-Timer”
(p. 64) to shoot.
76
(EC256)_CDI-E404_Guide_E.book Page 77 Friday, February 6, 2009 7:44 PM
$ Customizing the Self-Timer
You can set the time delay (0 – 30 seconds) and the number of shots taken
(1 – 10 shots).
Select $.
● After pressing the p button, press the
op buttons to select $, then
immediately press the n button.
Select the settings.
● Press the op buttons to select [Delay] or
[Shots].
● Press the qr buttons to select a value,
then press the m button.
Y
P
O
● Follow Step 3 in “Ò Using the Self-Timer”
(p. 64) to shoot.
What if the number of shots is set to two or more shots?
• Exposure and white balance settings are set with the first shot.
• When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp lights).
C
• If the flash fires, the shooting interval may be longer.
• If you set a high number of shots, the shooting interval may be longer.
• If the memory card becomes full, shooting stops automatically.
Shooting Using a TV Monitor
You can use a TV to display the camera screen content.
• Connect the camera to a TV as described in “Viewing Images on a TV”
(p. 109).
• Shooting procedures are the same as when using the camera’s monitor.
77
(EC256)_CDI-E404_Guide_E.book Page 78 Friday, February 6, 2009 7:44 PM
Changing the Composition with the
Focus Lock
While you press and hold the shutter button halfway, the focus and exposure
are fixed. You can now recompose and shoot. This is called Focus Lock.
Focus.
● Center the subject you want in focus, and
press the shutter button halfway.
● Confirm that the AF Frame on the subject
is green.
Recompose.
Y
P
O
● Hold the shutter button pressed halfway
and recompose the scene.
Shoot.
● Press the shutter button fully.
C
78
(EC256)_CDI-E404_Guide_E.book Page 79 Friday, February 6, 2009 7:44 PM
5
Getting More Out of Your
Camera
Y
P
O
This chapter serves as the advanced version of Chapter 4 and
explains how to take pictures using various functions.
C
• This chapter assumes that the shooting mode is set to G.
• “≈ Shooting Long Exposures” (p. 90), “Changing the Color and Shooting”
(p. 91) and “L Shooting Stitch Assist Images” (p. 94) assume you have
set the shooting mode to K and selected the corresponding mode.
• Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 150 – 153).
79
(EC256)_CDI-E404_Guide_E.book Page 80 Friday, February 6, 2009 7:44 PM
Changing the AF Frame Mode
You can change the AF (Auto Focus) frame mode to match the conditions
you want to shoot.
Select [AF Frame].
● Press the n button, select the 4
tab, select [AF Frame], then press the qr
buttons to select an option.
Face AiAF
• Detects people’s faces and sets the focus, exposure (evaluative metering only)
and white balance (
only).
• When the camera is pointed at subjects, a white frame appears on the face the
camera judges to be the main subject, and gray frames (max. 2) will appear on
other faces. When the shutter button is pressed halfway, up to 9 green frames
will appear on faces on which the camera focuses.
Y
P
O
• If a face is not detected and only gray frames (no white frame) appear,
up to 9 green frames will appear on the areas the camera focuses on
when the shutter button is pressed halfway.
• Examples of faces that cannot be detected:
C
• Subjects that are far away or extremely close.
• Subjects that are dark or light.
• Faces turned to the side or at a diagonal, or faces with a portion hidden.
• The camera may mistakenly identify non-human subjects as a face.
• If the camera cannot focus when you press the shutter button halfway,
the AF frame will not appear.
Center
The AF frame is fixed at the center. This is effective for focusing on a specific
point.
You can reduce the AF frame size
• Press the n button, select the 4 tab, then select the [AF Frame Size]
menu item and [Small] option.
• The setting is configured to [Normal] when the Digital Zoom (p. 61) or Digital
Tele-converter (p. 62) is used.
80
(EC256)_CDI-E404_Guide_E.book Page 81 Friday, February 6, 2009 7:44 PM
Magnifying the Focal Point
If the camera cannot focus when you press the shutter button halfway, the
AF frame will turn yellow.
Magnifying the Focal Point
If you press the shutter button halfway, the AF frame will magnify and you
can check the focus.
Select [AF-Point Zoom].
● Press the n button and select [AFPoint Zoom] on the 4 tab. Use the qr
buttons to select [On].
Y
P
O
Check the focus.
C
● Press the shutter button halfway.
In [Face AiAF], the face selected as the
main subject will appear magnified.
In [Center], the contents of the center AF
frame will appear magnified.
What if the display does not magnify?
The display will not appear magnified in [Face AiAF] mode if a face cannot be
detected (p. 80) or is too big in relation to the screen. In [Center] mode, it will not
appear magnified if the camera cannot focus.
The magnified display will not appear when using the Digital Zoom (p. 61)
or Digital Tele-Converter (p. 62), Servo AF (p. 82), or when connected to
a TV (p. 77).
81
(EC256)_CDI-E404_Guide_E.book Page 82 Friday, February 6, 2009 7:44 PM
% Shooting with the AF Lock
The focus can be locked. After locking the focus, the focal distance will not
change even when you release your finger from the shutter button.
Lock the focus.
● Keep the shutter button pressed halfway
and press the q button.
● The focus locks and % is displayed on
the screen.
● If you release your finger from the shutter
button, and press the q button once more,
% will disappear and the focus will
unlock.
Y
P
O
Compose the scene and shoot.
Shooting with Servo AF
Since focus will be maintained on a subject while you press the shutter
button halfway, you can shoot moving subjects without missing photo
opportunities.
C
Select [Servo AF].
● Press the n button and select [Servo
AF] on the 4 tab, and use the qr
buttons to select [On].
Focus.
While the shutter button is pressed
halfway, the focus will continue to adjust
on the spot where the blue frame appears.
• The camera may not be able to focus in some conditions.
• You cannot shoot with the AF lock in this mode.
• You cannot set the Servo AF mode if you have set the [AF-Point Zoom]
option in the 4 tab to [On] (p. 81).
• Not available in Face Self-Timer (p. 65).
82
(EC256)_CDI-E404_Guide_E.book Page 83 Friday, February 6, 2009 7:44 PM
f Shooting in Manual Focus Mode
When focusing cannot be achieved with autofocus, you can manually set an
approximate focus and then press the shutter button halfway to fine-tune the
focus range.
Press the q button.
Select f.
● After using the qr buttons to select f,
quickly press the op buttons.
● f appears on the screen, and the AF
frame in the center of the screen is
magnified.
Y
P
O
Approximate focus.
● The side bar shows your focal point and a
C
distance display. While looking at the
magnified area, press the op buttons to
find an approximate focus. Then press the
m button.
Fine-tune your focus.
● Pressing the shutter button halfway will
fine-tune your focus.
Changing the Distance Units
Press the n button, then in the 3 tab, scroll down to [Distance Units]
where you can select the desired units of measurement.
• For accurate focusing, it is recommended to use a tripod or to otherwise
stabilize the camera.
• When using the digital zoom (p. 61), digital tele-converter (p. 62), or
when using a television as a display (p. 77), you will be able to focus but
the magnified area will not display.
• To turn off the magnified area, press the n button, and in the 4
tab, scroll down to [MF-Point Zoom] and select [Off].
83
(EC256)_CDI-E404_Guide_E.book Page 84 Friday, February 6, 2009 7:44 PM
0 Selecting the Person to Focus On
(Face Select)
You can select a specific person's face to focus on and then shoot.
Register 0 to the c button
(p. 136).
Frame
Set the Face Select mode.
● Point the camera toward the face and
press the c button.
After [Face Select: On] displays, a face
frame
will appear around the face
detected as the main subject.
● Even if the subject moves, the frame will
follow the subject within a certain range.
● If a face is not detected,
will not
appear.
Y
P
O
Select the face on which to focus.
C
● If you press the c button, the frame will
move to another face detected by the
camera.
● When the frame has scrolled through all
the detected faces, [Face Select: Off] will
display, and the frame or frames for the
current AF setting will appear.
Shoot.
● Press the shutter button halfway. The face
frame of the selected face will change into
a green
.
● Press the shutter button fully to shoot.
Confirming the number of detected faces
Keeping the c button pressed will display the number of faces detected by the
camera (35 at the most) (green: main subject’s face, white: detected face).
84
(EC256)_CDI-E404_Guide_E.book Page 85 Friday, February 6, 2009 7:44 PM
Changing the Metering Mode
You can change the metering mode (brightness measuring function) to
match the shooting conditions.
Select the metering mode.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
then press the m button.
The setting will display on the screen.
Suitable for standard shooting conditions, including back lit shots.
Automatically adjusts the exposure to match the shooting
conditions.
Center
Averages the light metered from the entire frame, but gives
Weighted Avg. greater weight to the center.
Only meters within the
(Spot AE Point frame) that appears at
Spot
the center of the screen.
Evaluative
C
Y
P
O
& Shooting with the AE Lock
When you wish to take several shots with the same exposure, you can set
the exposure and focus separately using the AE lock. AE stands for “Auto
Exposure”.
Lock the exposure.
● Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
When & appears, the exposure will be
set.
● If you release your finger from the shutter
button and press the o button again, &
will disappear and the AE will unlock.
Compose the scene and shoot.
85
(EC256)_CDI-E404_Guide_E.book Page 86 Friday, February 6, 2009 7:44 PM
( Shooting with the FE Lock
Just as with the AE lock (p. 85), you can lock the exposure for shooting with
the flash. FE stands for “Flash Exposure”.
Select h (p. 68).
Lock the exposure.
● Point the camera toward the subject and
press the o button while pressing the
shutter button halfway.
The flash will fire and when ( appears,
the flash output will be retained.
● If you release your finger from the shutter
button and press the o button again, (
will disappear and the FE will unlock.
Y
P
O
Compose the scene and shoot.
… Shooting with Slow Synchro
C
You can make the main subject, such as people, appear bright by having the
camera provide the appropriate illumination with the flash. At the same time,
you can use a slow shutter speed to brighten the background that the light
from the flash cannot reach.
Select ….
● After pressing the r button, press the qr
buttons to select …, then press the m
button.
Once set, … will appear on the screen.
● Even if the flash fires, ensure that the
subject does not move until the shutter
sound ends.
Attach the camera to a tripod to prevent the camera from moving and
blurring the image. It is recommended to set the [IS Mode] to [Off] when
shooting with a tripod (p. 136).
86
(EC256)_CDI-E404_Guide_E.book Page 87 Friday, February 6, 2009 7:44 PM
@ Making Dark Subjects Appear
Brighter (i-Contrast)
The camera can automatically detect and compensate for faces or subjects
that appear dark in certain shooting conditions.
Select [i-Contrast].
● Press the n button, select
[i-Contrast] from the 4 tab, and use the
qr buttons to select [Auto].
@ will appear on the screen.
C
Y
P
O
Under some conditions, the image may appear coarse or the exposure
setting may not be suitable.
You can correct recorded images (p. 122).
87
(EC256)_CDI-E404_Guide_E.book Page 88 Friday, February 6, 2009 7:44 PM
ΠRed-Eye Correction
You can automatically correct red eyes in images taken with the flash.
Select [Flash Settings].
● Press the n button, select [Flash
Settings] from the 4 tab and press the
m button.
Adjust the setting.
● Press the op buttons to select [Red-Eye
Corr.] and press the qr buttons to select
[On].
Πwill appear on the screen (p. 44).
Y
P
O
Red-eye correction may be applied to other red parts than red eyes. For
example, when red make-up has been used around eyes.
C
• You can correct recorded images (p. 123).
• If you press the r button as shown on the screen in Step 2 and then
press the n button, the Flash Settings screen will display.
88
(EC256)_CDI-E404_Guide_E.book Page 89 Friday, February 6, 2009 7:44 PM
Checking for Shut Eyes
When the camera detects that there is a possibility that people have their
eyes shut,
appears.
Select [Blink Detection].
● Press the n button, select the 4
tab, and then select [Blink Detection]. Use
the qr buttons to select [On].
Shoot.
● When a person with shut eyes is detected,
a frame and
appear for a few seconds.
In W, " and $ mode, the function is only available for the last image
shot.
C
Y
P
O
89
(EC256)_CDI-E404_Guide_E.book Page 90 Friday, February 6, 2009 7:44 PM
≈ Shooting Long Exposures
You can set the shutter speed to a range between 1 and 15 seconds to
shoot long exposures. However, you should attach the camera to a tripod to
prevent the camera from moving and blurring the image.
Select ≈.
● Follow Step 2 on p. 56 to select ≈.
Select the shutter speed.
● Press the o button.
● Press the qr buttons, select shutter
Y
P
O
speed and press the m button.
Confirm the exposure.
● When you press the shutter button
C
halfway, the exposure for the selected
shutter speed will appear.
• The brightness of the image may differ from the brightness of the screen
in Step 3 when the shutter button was pressed halfway.
• When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
• It is recommended to set the [IS Mode] to [Off] when shooting with a
tripod (p. 136).
If the flash fires, the image may be overexposed. If this happens, set the
flash to ! and shoot.
90
(EC256)_CDI-E404_Guide_E.book Page 91 Friday, February 6, 2009 7:44 PM
Changing the Color and Shooting
You can change the look of an image when shooting. However, the shooting
conditions may cause the image to become coarse, or the colors may not
come out as expected.
T Color Accent
You can select to retain a single color and change the rest to black and white
in a composition.
Select T.
● Follow Step 2 on p. 56 to select T.
Press the l button.
● The unchanged image and the Color
Y
P
O
Accent image will both display.
● The color for default settings is green.
Specify the color.
● Position the center frame so it is filled with
C
Recorded color
the color you want and press the q button.
The specified color will be recorded.
Specify the range of colors.
● Press the op buttons to change the
range of colors to be retained.
● Select a negative value to limit the range
of colors. Select a positive value to extend
the range of colors to similar colors.
● Pressing the l button accepts the
setting and restores the shooting screen.
• Using the flash may cause unexpected results in this mode.
• The recorded color will be saved even if you turn off the power.
91
(EC256)_CDI-E404_Guide_E.book Page 92 Friday, February 6, 2009 7:44 PM
Changing the Color and Shooting
Y Color Swap
You can swap one color in an image for another when recording it. You can
only swap one color.
Select Y.
● Follow Step 2 on p. 56 to select Y.
Press the l button.
Y
P
O
● The unchanged image and the Color
Swap image will both display.
● The default setting is to change green to
gray.
C
Specify the color to be swapped.
● Position the center frame so it is filled with
the color you want and press the q button.
The specified color will be recorded.
Specify the target color.
● Position the center frame so it is filled with
the color you want and press the r button.
The specified color will be recorded.
92
(EC256)_CDI-E404_Guide_E.book Page 93 Friday, February 6, 2009 7:44 PM
Changing the Color and Shooting
Specify the range of colors to be
swapped.
● Press the op buttons to adjust the range
of colors affected.
● Select a negative value to limit the range
of colors. Select a positive value to extend
the range of colors to similar colors.
● Pressing the l button accepts the
setting and restores the shooting screen.
• Using the flash may cause unexpected results in this mode.
• The recorded color and range of colors will be saved even if you turn off
the power.
• Under some conditions, the image may appear coarse.
C
Y
P
O
93
(EC256)_CDI-E404_Guide_E.book Page 94 Friday, February 6, 2009 7:44 PM
L Shooting Stitch Assist Images
Large subjects can be split into several shots that can later be merged together
using the included software on a computer to create a panoramic image.
Select x or v.
● Follow Step 2 on p. 56 to select x or v.
Take the first shot.
The exposure and white balance will be
set with the first shot.
Take subsequent shots.
● Overlap part of the first shot when taking
the second shot.
Y
P
O
● Minor discrepancies in the overlapping
portions will be corrected when the
images are merged.
● You can repeat the procedure for the
second shot to take up to 26 shots.
● When you have finished taking shots,
proceed to Step 4.
C
Finish shooting.
● Press the m button.
Merge the images on a computer.
● For details on how to merge the images,
refer to the Software Starter Guide.
This function is not available when a TV is used as the monitor (p. 77).
94
(EC256)_CDI-E404_Guide_E.book Page 95 Friday, February 6, 2009 7:44 PM
6
Using Various Functions for
Shooting Movies
Y
P
O
This chapter provides more advanced information than the
“E Shooting Movies” and “1 Viewing Movies” sections of Chapter 1.
C
• This chapter assumes that the shooting mode is set to E.
95
(EC256)_CDI-E404_Guide_E.book Page 96 Friday, February 6, 2009 7:44 PM
Changing the Movie Mode
You can select between three movie modes.
Select a movie mode.
● After pressing the 4 / E button, use the
qr buttons to select E.
Select an option.
● Press the op buttons to select an option,
then press the m button.
The setting will display on the screen.
X Standard
For shooting standard quality movies.
> Color Accent
These shooting modes let you change all colors except the
selected color to black and white, or exchange the selected color
for another color, when shooting. See “Changing the Color and
Shooting” (p. 91) for details.
z Color Swap
Y
P
O
Under some conditions, colors may not turn out as expected in the > and
z mode.
C
Changing the Image Quality
You can select between two image quality settings.
Select the image quality.
● After pressing the m button, press the
op buttons to select
.
Select an option.
● Press the qr buttons to select an option,
and press the m button.
The setting will display on the screen.
96
(EC256)_CDI-E404_Guide_E.book Page 97 Friday, February 6, 2009 7:44 PM
AE Lock/Exposure Shift
Image Quality Table
Image Quality
(Recording Pixels/Frame Rate)
Content
640 × 480 pixels, 30 frames/sec. For shooting standard quality movies.
Since the number of the recording pixels is
320 × 240 pixels, 30 frames/sec. smaller, the image quality will be lower than with
, but you can record three times the length.
Estimated Shooting Time
Shooting Time
Image Quality
(Frame Rate)
2 GB
23 min. 49 sec.
8 GB
1 hr. 35 min. 11 sec.
1 hr. 13 min. 10 sec.
4 hrs. 52 min. 24 sec.
Y
P
O
• Based on Canon’s testing standards.
• Recording will automatically stop when either the clip file size reaches 4 GB or the
recording time reaches approximately 1 hour.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 4 or higher memory cards are recommended.
C
AE Lock/Exposure Shift
You can set the exposure or change it in 1/3 steps within a range of ±2.
Focus.
● Press the shutter button halfway to focus.
Lock the exposure.
● Press the o button to lock the exposure.
The exposure shift bar appears.
● Press the o button again to release the lock.
Change the exposure.
● While watching the screen, press the qr
buttons to adjust the brightness.
Shoot.
97
(EC256)_CDI-E404_Guide_E.book Page 98 Friday, February 6, 2009 7:44 PM
Other Shooting Functions
The following functions can be used in the same way as for still images. For
> and z modes, the functions with an * attached can be used in the same
way as for still images.
• Zooming in More Closely on Subjects (Digital Zoom) (p. 61)
You can use the digital zoom, but the optical zoom cannot be used. If you want
to shoot at the maximum zoom factor, you should adjust the optical zoom to the
maximum before shooting.
The sound of the zoom will be recorded.
• Ò Using the Self-Timer (p. 64)*
• e Shooting Close-ups (Macro) (p. 69)*
• u Shooting Far Away Subjects (Infinity) (p. 69)*
• Adjusting the White Balance (p. 74)
• Changing the Tone of an Image (My Colors) (p. 75)
• Î Shooting Using the Two Second Self-Timer (p. 76)*
• Shooting Using a TV Monitor (p. 77)*
• % Shooting with the AF Lock (p. 82)
• f Shooting in Manual Focus Mode (p. 83)
• Turning off the AF Assist Beam (p. 134)*
• Displaying the Overlay (p. 135)*
[3:2 Guide] is not available.
• Changing the IS-Mode Settings (p. 136)*
You can switch between [Continuous] and [Off].
C
Y
P
O
Playback Functions
The following functions can be used in the same way as for still images.
•
•
•
•
•
•
•
•
•
•
a Erasing Images (p. 29)
g Searching Images (Index Display) (p. 102)
d Viewing Images in Filtered Playback (p. 103)
. Viewing Slideshows (p. 105)
+ Changing Image Transitions (p. 108)
Viewing Images on a TV (p. 109)
/ Erasing All Images (p. 110)
: Protecting Images (p. 114)
; Organizing Images by Category (My Category) (p. 116)
\ Rotating Images (p. 118)
98
(EC256)_CDI-E404_Guide_E.book Page 99 Friday, February 6, 2009 7:44 PM
* Editing
Summary for “1 Viewing Movies” (p. 34)
Exit
Playback
Slow Motion Playback (you can use the qr buttons to adjust the speed.
Sound will not play back.)
Display the first frame
Previous frame (Rewind if you hold down the m button.)
Next frame (Fast forward if you hold down the m button.)
Display the last frame
Edit (p. 99)
Displays when connected to a PictBridge compliant printer (p. 30).
Refer to the Personal Printing Guide for details.
* Editing
Y
P
O
You can trim the beginnings and ends of recorded movies in one-second
increments.
C
Movie Editing Panel
Select *.
● Follow Step 3 on p. 34, select * and
press the m button.
The movie editing panel and the movie
editing bar will display.
Set the editing range.
● Press the op buttons and select
or
.
● Press the qr buttons to move .
will
display at each one-second interval. If you
select
, you can trim the beginning of
the movie from
. If you select
, you
can trim the end of the movie from
.
Movie Editing Bar
99
(EC256)_CDI-E404_Guide_E.book Page 100 Friday, February 6, 2009 7:44 PM
* Editing
Even if you move to a point other than a
point, only the portion from the
nearest
to the left will be trimmed
when
is selected. Only the portion
from the nearest
to the right will be
trimmed when
is selected.
● The section selected with will be the
section of the movie that remains after
editing.
Check the edited movie.
● Press the op buttons to select
(Play),
then press the m button. The edited
movie will play.
● To edit the movie again, repeat Step 2.
● To cancel editing, press the op buttons,
and select
. After pressing the m
button, press the qr buttons to select [OK],
and press the m button.
C
Y
P
O
Save the edited movie.
● Press the op buttons to select
, then
press the m button.
● Press the qr buttons to select [New File],
then press the m button.
The movie will be saved as a new file.
• When [Overwrite] in Step 4 is selected, the unedited movie is overwritten
with the edited movie, erasing the original movie.
• When there is not enough space left on the memory card, only
[Overwrite] can be selected.
• If the battery is depleted partway through editing, the edited movie clips
may not be saved. When editing movies, you should use a fully charged
battery or the separately sold AC adapter kit (pp. 40, 140).
100
(EC256)_CDI-E404_Guide_E.book Page 101 Friday, February 6, 2009 7:44 PM
7
Using Playback and Other
Functions
Y
P
O
The first part of this chapter explains various ways to play back and
edit images. The latter part explains how to specify images for
printing.
• Press the 1 button to select the Playback mode before operating the
camera.
C
• It may not be possible to play back or edit images that have been edited
on a computer, had their file name changed, or have been taken on a
different camera.
• The edit function (pp. 119 – 123) cannot be used if the memory card
does not have free space available.
101
(EC256)_CDI-E404_Guide_E.book Page 102 Friday, February 6, 2009 7:44 PM
g Searching Images (Index Display)
Displaying multiple images at a time lets you quickly find the image you
want.
Press the g button.
Images will display in an index. The
selected image will have a green frame
and be enlarged.
Select an image.
● Press the opqr buttons to select
images.
● Press the k button to display the selected
image by itself.
Images in Sets of 9
Y
P
O
Press the g button.
C
Images will display in an index.
Press the g button again.
● The jump bar will be displayed and a
Jump bar
green frame appears around the currently
displayed images.
Change the displayed images.
● Press the qr buttons to switch between
sets of 9 images.
● Pressing the k button will restore the
index display.
If the jump bar is displayed, pressing qr while holding the m button will
jump to either the first or last set of images.
102
(EC256)_CDI-E404_Guide_E.book Page 103 Friday, February 6, 2009 7:44 PM
d Viewing Images in Filtered Playback
When there are many images on the memory card, you can filter and display
them by a specified condition. You can also delete (p. 110) or protect
(p. 114) all images at once in the filtered condition.
Setting the Conditions
● In Single Image Playback, press the o
button.
● Press the op buttons and select a jump
method.
● If you press the l button, you can
switch Information Display on or off.
Jump Shot Date
Displays the images of the specified category
(p. 116).
Jump to My Category
Jump to Folder
Displays the images in a specified folder.
Jump to Movie
Jumps to a movie.
C
Jump 10 Images
Jump 100 Images
Search by
Y
P
O
Displays the images shot on the specified date.
,
,
Jumps over 10 images at a time.
Jumps over 100 images at a time.
and
Select a target filter.
● Use the qr buttons to select a filter
(excluding
).
● Pressing the n button restores the
single image display.
Target Filters
103
(EC256)_CDI-E404_Guide_E.book Page 104 Friday, February 6, 2009 7:44 PM
d Viewing Images in Filtered Playback
Viewing images using filter
playback.
● If you press the m button, filter playback
will start.
and a blue frame will appear.
● If you press the qr buttons, the target
images selected in Step 1 will display.
● If you press the o button, it will cancel
filter playback.
Jump by
and
Images
● If you press the qr buttons, the display
will advance to the image that is the
selected number of images away.
● Pressing the n button restores the
single image display.
C
Y
P
O
What if you can’t select a target?
When you select
in Step 1 on p. 103, you can only select
if there are no
images sorted into categories. Also, you can only select 1 target when there are
only images with the same date in
and only 1 folder has been created in
.
Filter playback
In filter playback (Step 2), you can view filtered images with “g Searching
Images (Index Display)” (p. 102), “. Viewing Slideshows” (p. 105), and “k
Magnifying Images” (p. 108). However, if you change the category (p. 116), or
edit an image and save it as a new image (pp. 119 – 123), [Display All Images]
will display, and filter playback will cancel.
104
(EC256)_CDI-E404_Guide_E.book Page 105 Friday, February 6, 2009 7:44 PM
. Viewing Slideshows
You can automatically play back images recorded to a memory card. Each
image displays for approximately 3 seconds.
Select [Slideshow].
● Press the n button and select the 1
tab, then select [Slideshow] and press the
m button.
Select [Start].
● Press the op buttons to select [Start],
then press the m button.
A few seconds after “Loading image…”
displays, the slideshow will start.
● You can pause/restart a slideshow by
pressing the m button again.
● Press the n button to stop the
slideshow.
Y
P
O
• If you press the qr buttons during playback, the image will switch. If you
press and hold down the qr buttons you can fast-forward through
images.
• The power saving function does not work during slideshows (p. 53).
C
Changing Settings
You can change the time that slideshow images are displayed, transition
effects and set the slideshow to repeat. You can select from seven transition
effects when switching between images. You can also select which images
to play back.
Select [Slideshow].
● Press the n button and select the 1
tab, then select [Slideshow] and press the
m button.
Make the setting.
● Press the op buttons and select an item,
then press the qr buttons and adjust the
setting.
105
(EC256)_CDI-E404_Guide_E.book Page 106 Friday, February 6, 2009 7:44 PM
. Viewing Slideshows
Playback Filter
All Images
Date
My Category
Folder
Movies
Still images
Plays back all images.
Plays back images from a specified shooting date (See below).
Plays back images from a specified category (See below, p. 116).
Plays back images from a specified folder (See below).
Plays back movies only.
Plays back still images only.
Select Images for Playback by Type
You can select which images to play back within the playback filters: Date,
My Category, and Folder.
Y
P
O
Select the playback filter option
and press m button.
The playback filter selection screen will
display.
C
Press the op buttons to select a
playback filter, then press m
button.
Once set,
will appear.
● You can display the images within the
option by pressing the qr buttons.
Images will play back in the order they
were selected. However, if [My Category]
is selected, images will appear in order of
their image number.
Press the n button.
The selected options will be set, and the
slideshow screen will reappear.
106
(EC256)_CDI-E404_Guide_E.book Page 107 Friday, February 6, 2009 7:44 PM
Checking the Focus
You can magnify the area of a recorded image that was inside the AF frame
or the area of a face that was detected to check the focus.
Press the l button, and switch
to the focus check display (p. 45).
A white frame will appear where the AF
frame or face was when the focus was
set.
A gray frame will appear on a face
detected during playback.
The area within the orange frame appears
magnified.
Y
P
O
Change the magnification level or
location.
● Press the k button once.
● Use the k or g button to change the
C
display size, and the opqr buttons to
change the display position while
checking the focus.
Switch frames.
● Pressing the m button will switch to a
different frame.
● Pressing the n button resets the
display to Step 1.
107
(EC256)_CDI-E404_Guide_E.book Page 108 Friday, February 6, 2009 7:44 PM
k Magnifying Images
Press the k button.
● The display will zoom in on the image and
Approximate Location of
Displayed Area
will appear, if you continue to hold
the k button, it will continue to zoom in up
to a factor of 10x.
● If you press the opqr buttons, you can
move the location of the displayed area.
● When
appears on the screen,
press the g button to zoom out, or hold it
to return to single image view.
● If you press the m button,
will
display and you will be able to use the qr
buttons to switch between images at the
same level of magnification. Press the m
button again to return to normal.
Y
P
O
+ Changing Image Transitions
C
You can select from four transition effects when switching between images
in single image playback.
Select [Transition].
● Press the n button and select the 1
tab, then select [Transition] and use the
qr buttons to select a transition effect.
● Press the n button to accept the
setting.
108
(EC256)_CDI-E404_Guide_E.book Page 109 Friday, February 6, 2009 7:44 PM
Viewing Images on a TV
Using the supplied AV cable, you can connect the camera to a TV to view
images you have shot.
Items to Prepare
• Camera and TV
• AV cable supplied with the camera (p. 2)
Turn off the camera and TV.
Connect the camera to the TV.
● Open the camera’s terminal cover and
White or black
Yellow
Yellow
C
Black
fully insert the plug of the supplied AV
cable into the camera’s A/V OUT terminal.
● Insert the cable plug fully into the video
input terminals as shown in the illustration.
Y
P
O
Turn on the TV and switch it to the
input to which the cable is
connected.
Turn on the camera.
● Press the 1 button to turn on the camera.
The image will appear on the TV (nothing
will appear on the monitor of the camera).
● After you finish viewing, turn off the
camera and TV, and unplug the AV cable.
What if the images don’t properly display on the TV?
Images will not display correctly if the camera’s video output setting (NTSC/PAL)
does not match the TV system. Press the n button, select the 3 tab and
[Video System] to switch to the correct video system.
109
(EC256)_CDI-E404_Guide_E.book Page 110 Friday, February 6, 2009 7:44 PM
/ Erasing All Images
You can select images and erase them in groups. Since erased images
cannot be recovered, exercise adequate caution before erasing. Protected
images (p. 114) cannot be erased.
Select [Erase].
● Press the n button, select the 1 tab
and [Erase], and press the m button.
Select a selection method.
● Press the op buttons, select a selection
Y
P
O
method, and press the m button.
● Press the n button to return to the
menu screen.
Selecting Images Individually
C
Select [Select].
● Follow Step 2 above to select [Select] and
press the m button.
Select images.
● Press the qr buttons, select the image
and press the m button.
Once set,
will appear on the screen.
● Pressing the m button once more will
cancel the selection, and
will
disappear.
● To select multiple images, repeat the
above operation.
110
(EC256)_CDI-E404_Guide_E.book Page 111 Friday, February 6, 2009 7:44 PM
/ Erasing All Images
Press the n button.
Erase.
● Press the qr buttons, select [OK] and
press the m button.
Select Range
Select [Select Range].
● Follow Step 2 on p. 110 to select [Select
Range] and press the m button.
Y
P
O
Select the starting image.
● Press the m button.
● Press the qr buttons, select the image and
press the m button.
C
Select the ending image.
● Press the r button, select [Last image]
and press the m button.
● You cannot select images before the first
image.
● Press the qr buttons to select an image,
and press the m button.
111
(EC256)_CDI-E404_Guide_E.book Page 112 Friday, February 6, 2009 7:44 PM
/ Erasing All Images
Erase.
● Press the p button to select [Erase], then
press the m button.
Select All Images
Y
P
O
Select [All Images].
● Follow Step 2 on p. 110 to select [All
C
Images] and press the m button.
Erase.
● Press the qr buttons, select [OK] and
112
press the m button.
(EC256)_CDI-E404_Guide_E.book Page 113 Friday, February 6, 2009 7:44 PM
/ Erasing All Images
Select by Category
Select [Select by Date], [Select by
Category] or [Select by Folder].
● Follow Step 2 on p. 110 to select a
category and press the m button.
Select a menu item.
● Press the op buttons, select the items to
set and press the m button.
● If you press the qr buttons, you can
display the images within the category.
Once set,
will appear on the screen.
● Pressing the m button again deselects
the category and
disappears.
Y
P
O
Press the n button.
C
Erase.
● Press the qr buttons select [OK] and
press the m button.
What if you cannot select [Select by Category]?
If there are no images that have been sorted into categories (p. 116), you will not
be able to select [Select by Category] in Step 1.
113
(EC256)_CDI-E404_Guide_E.book Page 114 Friday, February 6, 2009 7:44 PM
: Protecting Images
You can protect important images so that they cannot be erased by the
camera (pp. 29, 110).
Select [Protect].
● Press the n button and select the 1
tab, then select [Protect] and press the m
button.
Select a selection method.
● Press the op buttons to select a
selection method, and press the m
button.
● Press the n button to return to the
menu screen.
Y
P
O
If you format the memory card (pp. 24, 52), protected images will also be
erased.
C
Protected images cannot be erased with the camera’s erase function. To
erase an image, cancel protection first.
Selecting Images Individually
Select [Select].
● Follow Step 2 above to select [Select], and
press the m button.
● Follow Step 2 on p. 110 to select an
image.
Once set,
will appear on the screen.
● Pressing the m button again deselects
the image and
will disappear.
● To select multiple images, repeat the
above operation.
114
(EC256)_CDI-E404_Guide_E.book Page 115 Friday, February 6, 2009 7:44 PM
: Protecting Images
Select Range
Select [Select Range].
● Follow Step 2 on p. 114 to select [Select
Range] and press the m button.
● Follow Steps 2 and 3 on p. 111 to select
images.
Protect images.
● Press the p button, select [Protect] and
press the m button.
Select All Images
Y
P
O
Select [All Images].
● Follow Step 2 on p. 114 to select [All
Images] and press the m button.
Protect images.
C
● Press the op buttons, select [Protect]
and press the m button.
Select by Category
Select [Select by Date], [Select by
Category] or [Select by Folder].
● Follow Step 2 on p. 114 to select the type
and press the m button.
● Follow Steps 2 and 3 on p. 113 to select
images.
Protect images.
● Press the op buttons, select [Protect]
and press the m button.
You can unlock groups of protected images if you select [Unlock] in Step
2, while in [Select Range], [All Images] or [Select by Category].
115
(EC256)_CDI-E404_Guide_E.book Page 116 Friday, February 6, 2009 7:44 PM
; Organizing Images by Category
(My Category)
You can categorize images. You can also use the categorized images in the
following functions.
• Viewing Images in Filtered Playback (p. 103), Slideshow (p. 105), Erase
All (p. 110), Protect (p. 114), Print Settings (DPOF) (p. 125)
Select [My Category].
● Press the n button and select the 1
tab, then select [My Category] and press
the m button.
Y
P
O
Make the setting.
● Press the op buttons, select a category
and press the m button.
● Press the n button to return to the
C
menu screen.
Images are automatically categorized by shooting condition as they are
shot.
: Images taken in I, F, C modes, or pictures taken with the [AF
Frame] set to [Face AiAF].
: Images detected as
, or
when taken in ƒ (Auto), or J, U,
O modes.
: Images taken in H, t, w, S, y, P modes.
116
(EC256)_CDI-E404_Guide_E.book Page 117 Friday, February 6, 2009 7:44 PM
; Organizing Images by Category (My Category)
Selecting Images Individually
Select [Select].
● Follow Step 2 on p. 116 to select [Select]
and press the m button.
● Follow Step 2 on p. 110 to select images.
● Press the op buttons, select a category
and press the m button.
Once set,
will appear on the screen.
● Pressing the m button again deselects
the category and
disappears.
● To select multiple images, repeat the
above operation.
Select Range
Y
P
O
Select [Select Range].
● Follow Step 2 on p. 116 to select [Select
C
Range] and press the m button.
● Follow Steps 2 and 3 on page 111 to
select images.
● Press the p button to select an item, then
press the qr buttons, and select a type.
Select the setting.
● Press the p button to select [Select] and
press the m button.
If you select [Deselect] in Step 2, you can deselect all of the images in the
[Select Range] category.
117
(EC256)_CDI-E404_Guide_E.book Page 118 Friday, February 6, 2009 7:44 PM
\ Rotating Images
You can change the orientation of an image and save it.
Select [Rotate].
● Press the n button and select the 1
tab, then select [Rotate] and press the
m button.
Rotate the image.
● Press the qr buttons to select an image
to rotate.
Y
P
O
● The image will rotate 90° with each press
of the m button.
● Pressing the n button will restore the
menu screen.
C
118
(EC256)_CDI-E404_Guide_E.book Page 119 Friday, February 6, 2009 7:44 PM
= Resizing Images
You can resize images to a lower pixel setting and save the resized image
as a separate file.
Select [Resize].
● Press the n button and select the 1
tab, then select [Resize] and press the m
button.
Select an image.
● Press the qr buttons to select the image
and press the m button.
Select an image size.
Y
P
O
● Press the qr buttons to select an option,
then press the m button.
The [Save new image?] screen will
appear.
C
Save the new image.
● Press the qr buttons to select [OK] and
press the m button.
The image will be saved as a new file.
Display the new image.
● When you press the n button, the
[Display new image?] screen will appear.
If you press the qr buttons to select [Yes]
and press the m button, the saved image
will display.
• You cannot resize an image to a larger size.
• You cannot resize images taken with the
and
settings.
119
(EC256)_CDI-E404_Guide_E.book Page 120 Friday, February 6, 2009 7:44 PM
[ Trimming
You can cut out a portion of a recorded image and save it as a new image file.
Select [Trimming].
● Press the n button, select the 1 tab
and [Trimming], then press the m button.
Select an image.
● Press the qr buttons to select the image
and press the m button.
Adjust the trimming area.
Trimming Area
A green frame will appear around the
portion of the image to be trimmed.
The original image will display in the upper
left and the trimmed image will display in
the lower right.
● If you press the g or k button, you can
change the frame size.
● If you press the opqr buttons, you can
move the frame.
● If you press the l button, you can
change the vertical/horizontal orientation
of the frame.
● In an image with a detected face, a gray
frame will appear around faces located in
the upper left of the frame, and the frame
can be used for trimming. You can switch
between frames by pressing the 2
button.
● Press the m button.
C
Trimming Area Display
Recorded pixels
after trimming
Y
P
O
Save as a new image and display.
● Perform Steps 4 and 5 on p. 119.
•
,
and
images cannot be trimmed.
• Trimming is only possible for images shot at aspect ratio 4:3 (vertical 3:4).
• The number of recorded pixels in a trimmed image will be smaller than
before trimming.
120
(EC256)_CDI-E404_Guide_E.book Page 121 Friday, February 6, 2009 7:44 PM
? Adding Effects with the My Colors
Function
You can change the color of an image and save it as a separate image.
Refer to p. 75 for details on each menu item.
Select [My Colors].
● Press the n button, select the 1 tab
and [My Colors], and press the m button.
Select an image.
● Press the qr buttons to select the image
and press the m button.
Select a menu option.
Y
P
O
● Press the qr buttons to select an option,
then press the m button.
● After selecting the menu option, you can
C
zoom the image by following the
operations in “k Magnifying Images”
(p. 108).
● If you press the m button during
magnified display, you can switch to the
original image. Pressing the n button
restores the menu screen.
Save as a new image and display.
● Perform Steps 4 and 5 on p. 119.
• If you repeatedly change the color of an image, the quality will gradually
deteriorate and you may not achieve the expected color.
• The coloration of images changed with this function may vary from those
recorded with the My Colors function (p. 75).
121
(EC256)_CDI-E404_Guide_E.book Page 122 Friday, February 6, 2009 7:44 PM
@ Making Dark Subjects Appear
Brighter (i-Contrast)
Detects and compensates for dark sections of subjects or people’s faces
and saves the image as a separate file. You can select 4 levels of correction:
[Auto], [Low], [Medium] or [High].
Select [i-Contrast].
● Press the n button, select the 1 tab
and [i-Contrast], then press the m button.
Select an image.
● Press the qr buttons to select the image
and press the m button.
Y
P
O
Select an option.
● Press the qr buttons to select an option,
then press the m button.
Save as a new image and display.
● Perform Steps 4 and 5 on p. 119.
C
What if the image wasn’t corrected by the [Auto] option as
well as you would like?
Select [Low], [Medium] or [High] and adjust the image.
• Under some conditions, the image may appear coarse or the exposure
setting may not be suitable.
• Repeatedly adjusting the same image may cause the quality to
deteriorate.
122
(EC256)_CDI-E404_Guide_E.book Page 123 Friday, February 6, 2009 7:44 PM
] Correcting the Red-Eye Effect
You can automatically correct red eyes in images and save them as new
files.
Select [Red-Eye Correction].
● Press the n button, select the 1 tab
and [Red-Eye Correction], then press the
m button.
Select an image.
● Press the qr buttons, select the image.
Correct the image.
● When you press the m button, red-eye
C
Y
P
O
detected by the camera will be corrected
and a frame will appear around the
corrected portion.
● You can zoom the image using the
procedures in “k Magnifying Images”
(p. 108).
Save as a new image and display.
● Press the opqr buttons to select [New
File], and press the m button.
The image will be saved as a new file.
● Perform Step 5 on p. 119.
• Some images may not be properly corrected.
• When [Overwrite] in Step 4 is selected, the uncorrected image is
overwritten with the corrected data, erasing the original image.
• Protected images cannot be overwritten.
123
(EC256)_CDI-E404_Guide_E.book Page 124 Friday, February 6, 2009 7:44 PM
Printing from the Print List (DPOF)
You can add images to the print list (DPOF) directly after shooting or while in
playback by pressing the c button. You can print from a print list simply by
connecting your camera and printer. These selection methods comply with
the DPOF (Digital Print Order Format) standards.
Easily Add Images to the Print List
Select an image.
● Press the qr buttons to select the image.
Press the c button (videos will be
excluded).
Print list.
Y
P
O
● Press the op buttons and select the
number of prints, press the qr buttons to
select [Add] and press the m button.
● To cancel adding images, select the
added images and press the c button,
then press the qr buttons to select
[Remove] and press the m button.
C
Print Added Images
The following examples use the Canon SELPHY series printers. Please also
refer to the Personal Printing Guide.
Number of copies to print
Connect the camera to the printer
(p. 30).
Print.
● Press the op buttons, select [Print now]
and press the m button.
Printing will start.
If you stop the printer during printing and
start again, it will start from the next print.
124
(EC256)_CDI-E404_Guide_E.book Page 125 Friday, February 6, 2009 7:44 PM
Selecting Images for Printing (DPOF)
You can select certain images on a memory card for printing (up to 998
images) and specify the number of print copies so they can be printed
together or processed at a photo developer service. These selection
methods comply with the DPOF (Digital Print Order Format) standards.
Print Settings
You can set the print type, date and file number. These settings apply to all
images selected for printing.
Select [Print Settings].
● Press the n button and select the 2
tab, then select [Print Settings] and press
the m button.
Y
P
O
Adjust the settings.
● Press the op buttons to select a menu
Print Type
Date
File No.
Clear DPOF
data
C
Standard
Index
Both
On
Off
On
Off
On
Off
item, then press the qr buttons to select
an option.
Pressing the n button accepts the
settings and restores the menu screen.
Prints one image per page.
Prints several reduced size images per page.
Prints both standard and index formats.
Prints the date from the shooting information.
–
Prints the file number.
–
Removes all print settings after printing.
–
• Some printers or photo developer services may not be able to reflect all
of the print settings in the output.
•
may display when using a memory card with print settings set by a
different camera. These settings will be overwritten by those set by your
camera.
• Images with the date embedded always print with the date, regardless of the
[Date] setting. As a result, some printers may print the date twice on these
images if [Date] is also set to [On].
125
(EC256)_CDI-E404_Guide_E.book Page 126 Friday, February 6, 2009 7:44 PM
Selecting Images for Printing (DPOF)
• With [Index] selected, the [Date] and [File No.] options cannot be set to
[On] at the same time.
• The date will be printed in the style set in the [Date/Time] function in the
3 tab (p. 21).
Selecting the Number of Copies
Select [Select Images & Qty.].
● Press the n button and select the 2
tab, then select [Select Images & Qty.]
and press the m button.
Select an image.
Y
P
O
● Press the qr buttons to select an image,
then press the m button.
You will be able to set the number of print
copies.
● If you select [Index],
appears on the
screen.
● Press the m button again to deselect the
images.
will disappear.
C
Set the number of prints.
● Press the op buttons to set the number
of prints (maximum 99).
● Repeat Steps 2 and 3 to select other
images and the number of prints for each.
● You cannot set the number of print copies
for Index prints. You can only select which
images to print in Step 2.
Pressing the n button accepts the
settings and restores the menu screen.
126
(EC256)_CDI-E404_Guide_E.book Page 127 Friday, February 6, 2009 7:44 PM
Selecting Images for Printing (DPOF)
Select Range
Select [Select Range].
● Select [Select Range] in Step 1 on p. 126
and press the m button.
● Select images according to Steps 2 and 3
on p. 111.
Make print settings.
● Press the op buttons, select [Order] and
press the m button.
Set All Images to Print Once
Y
P
O
Select [Select All Images].
● Select [Select All Images] from the screen
in Step 1 on p. 126 and press the m
button.
C
Make print settings.
● Press the qr buttons, select [OK] and
press the m button.
Select by Category
Select [Select by Date], [Select by
Category] or [Select by Folder].
● Follow Step 1 on p. 126 to select a type
and press the m button.
● Follow Steps 2 and 3 on p. 113 to select
images.
Make print settings.
● Press the qr buttons, select [OK] and
press the m button.
127
(EC256)_CDI-E404_Guide_E.book Page 128 Friday, February 6, 2009 7:44 PM
Selecting Images for Printing (DPOF)
Clearing All Selections
Select [Clear All Selections].
● Select [Clear All Selections] in Step 1 on
p. 126, and press the m button.
● Press the qr buttons to select [OK], then
press the m button.
All selections will be cleared.
C
128
Y
P
O
(EC256)_CDI-E404_Guide_E.book Page 129 Friday, February 6, 2009 7:44 PM
8
Customizing the Camera
You can customize various functions to suit your shooting
preferences. The first part of this chapter explains convenient and
Y
P
O
commonly used functions. The latter part explains how to change
shooting and playback settings to suit your purposes.
C
129
(EC256)_CDI-E404_Guide_E.book Page 130 Friday, February 6, 2009 7:44 PM
Changing Functions
You can customize convenient and commonly used functions from the 3
tab (p. 48).
Turning off the Power Saving Function
You can set the power saving function (p. 53) to [Off]. Setting it to [On] is
recommended to save battery power.
● Select [Power Saving], then press the m
button.
● Press the op buttons to select [Auto
Power Down], then use the qr buttons to
select [Off].
● If you set the Power Saving function to
[Off], be careful not to forget to turn off the
camera after use.
Y
P
O
Setting the Screen Shut-Off Time
You can adjust the time the screen takes to shut off automatically (p. 53).
This also works when [Auto Power Down] is set to [Off].
C
● Select [Power Saving], then press the m
button.
● Press the op buttons to select [Display
Off], then use the qr buttons to select a
time.
● In order to save battery power, it is
recommended to select less than [1 min.].
130
(EC256)_CDI-E404_Guide_E.book Page 131 Friday, February 6, 2009 7:44 PM
Changing Functions
Using the World Clock
When traveling abroad, you can record images with local dates and times
simply by switching the time zone setting if you pre-register the destination
time zones. You can enjoy the convenience of not having to switch the Date/
Time settings.
Set the home time zone.
● Select [Time Zone] and press the m
button.
● When setting this for the first time, confirm
the information that displays on the screen
at the left, and press the m button.
● Press the qr buttons to select the home
time zone, then press the m button. To
set daylight saving time (adds 1 hour),
press the op buttons to select
.
C
Y
P
O
Set the world time zone.
● Press the op buttons to select
, then
press the m button.
● Press the qr buttons to select the
destination time zone, then press the m
button.
● You can also set the daylight saving time
as in Step 1.
Select the world time zone.
● Press the op buttons and select [Home/
World].
● Press the qr buttons to select
, then
press the n button.
will appear in the [Time Zone] or
shooting screen (p. 44).
131
(EC256)_CDI-E404_Guide_E.book Page 132 Friday, February 6, 2009 7:44 PM
Changing Functions
If you change the date or time in the
date will automatically change.
setting (p. 21), your
time and
Changing the File Number Assignment
Images you shoot are automatically assigned file numbers in the order they
were taken, from 0001 – 9999, and saved to folders of up to 2,000 images.
You can change the file number assignment.
● Select [File Numbering], then press the qr
buttons to select an option.
Even if you shoot using a new
memory card, the file numbers are
Continuous assigned consecutively until an
image with the number 9999 is
taken/saved.
If you replace the memory card
Auto Reset with a new one, file numbering
begins with 0001 again.
C
Y
P
O
• If you use a memory card already containing images, the newly
assigned file numbers may continue the existing numbering for both the
[Continuous] and [Auto Reset] settings. If you want to start over with file
number 0001, format the memory card before use (pp. 24, 52).
• Refer to the Software Starter Guide for information regarding folder
structure or image types.
Creating a Folder
You can create new folders in which to save images.
● Select [Create Folder], then press the m
button.
● Select [Create New Folder], then press
●
132
the qr buttons to select
.
will display on the screen (p. 44) when
shooting, and shots will be recorded into a
new folder.
(EC256)_CDI-E404_Guide_E.book Page 133 Friday, February 6, 2009 7:44 PM
Changing Functions
Creating Folders by Day and Time
You can set a day and time for folder creation.
● Select [Create Folder], then press the m
button.
● Select [Auto Create], then press the qr
buttons to select an interval.
● Select [Time], then press the qr buttons
to set a time.
● The new folder will be created on the set
day and time. Images shot after the
creation date are saved to the new folder.
Y
P
O
Turning off Auto Rotate
When you play back images on the camera, images shot in vertical
orientation automatically rotate and display vertically. You can turn off this
function.
C
● Select [Auto Rotate], then press the qr
buttons to select [Off].
133
(EC256)_CDI-E404_Guide_E.book Page 134 Friday, February 6, 2009 7:44 PM
Changing Shooting Functions
If you set the shooting mode to G (p. 68), you can change the settings in the
4 tab (p. 48).
Before attempting to shoot using a function explained in this chapter in
modes other than G mode, check if the function is available in those
modes (pp. 150 – 153).
Turning off the Red-Eye Reduction Function
The red-eye reduction lamp lights in order to reduce the red-eye effect that
occurs when shooting in dark conditions with the flash. You can turn off this
function.
● Select [Flash Settings], then press the m
Y
P
O
button.
● Press the op buttons to select [Red-Eye
Lamp], then press the qr buttons to
select [Off].
C
Turning off the AF Assist Beam
The lamp will automatically light to assist focusing in low light conditions
when you press the shutter button halfway. You can turn off the lamp.
● Select [AF-assist Beam], then press the
134
qr buttons to select [Off].
(EC256)_CDI-E404_Guide_E.book Page 135 Friday, February 6, 2009 7:44 PM
Changing Shooting Functions
Changing the Image Display Time
You can change the length of time the images display directly after shooting.
● Select [Review], then press the qr
buttons to select an option.
Off
No image displays.
Hold
The image displays until you press
the shutter button halfway.
Changing the Image Display Right After Shooting
You can change the image display that appears after shooting.
Y
P
O
● Select [Review Info], then press the qr
buttons to select an option.
Detailed Displays detailed information (p. 45).
C
Focus
Check
The area inside the AF frame is
magnified, allowing you to check the
focus. The procedure is the same as
in “Checking the Focus” (p. 107).
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for L size or postcard size prints.
● Select [Disp. Overlay], then press the qr
buttons to select an option.
Grid Lines A grid overlays the display.
3:2 Guide
Both
The areas outside the 3:2 range are
grayed out. This area will not print
when printing on paper with a 3:2
aspect ratio.
Both grid lines, and the 3:2 guide
will display.
135
(EC256)_CDI-E404_Guide_E.book Page 136 Friday, February 6, 2009 7:44 PM
Changing Shooting Functions
• In
mode, you cannot set [3:2 Guide] or [Both].
• Grid Lines will not be recorded on the image.
• The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray
areas.
Changing the IS-Mode Settings
● Select [IS Mode], then press the qr buttons
to select an option.
C
Image stabilization is always on.
You can confirm the result directly
Continuous on the display, which makes it
easier to check the composition or
focus.
Image stabilization is only active at
Shoot Only
the moment of shooting.
Image stabilization only counters
up and down motion. This option is
Panning
recommended for shooting objects
moving horizontally.
Y
P
O
• If camera shake is too strong, attach the camera to a tripod. It is
recommended to set the IS Mode to [Off] when the camera is fixed to a
tripod.
• When using [Panning], hold the camera horizontally. Image stabilization
does not work when the camera is held vertically.
Registering Functions to the c Button
● Select [Set c button], then press the m
button.
● Press the opqr buttons to select the
functions to register, then press the m
button.
Pressing the c button will call up the
registered function.
136
Changing Playback Functions
• Press
if you want to cancel a function.
• When this
symbol is shown on the bottom right of an icon, the
function cannot be used in the current shooting mode or function setting.
• In
, each press of the c button records white balance data (p. 74),
and the white balance settings also change to
.
Changing Playback Functions
You can adjust the settings in the 1 tab by pressing the 1 button (p. 48).
Selecting the Image that First Displays in
Playback
Y
P
O
● Select [Resume], then press the qr buttons
to select an option.
Last seen
C
Last shot
Resumes with the image last
viewed.
Resumes with the most recently
shot image.
Changing the Start-up Image or Sound
In the 3 tab, you can change the sounds played for each camera operation
or set the start-up image that appears when the camera power is turned on.
Change Sounds
● Select [Sound Options], then press the m
button.
● Press the op buttons to select an option.
● Press the qr buttons to change the sound.
1
Preset sound.
2
You can register your sounds using the
supplied software (ZoomBrowser EX/
ImageBrowser) (p. 138).
137
Changing the Start-up Image or Sound
Changing the Start-up Screen
● Select [Start-up Image], then press the m
button.
● Press the qr buttons to change the image.
No start-up image.
1
Preset image.
2
You can register images that you have
taken.
Setting a Recorded Image as the Start-up
Screen Image
When you press the 1 button and set the camera to playback mode, you
can register sounds and images.
Y
P
O
● Select [Start-up Image], then press the m
button.
● Press the qr buttons to select [2], then
C
press the m button.
● Press the qr buttons to select an image,
then press the m button.
● Press the qr buttons to select [OK], then
press the m button to complete
registration.
Any previously registered start-up image will be overwritten when
registering a new start-up image.
Using the included software to register sounds and the
start-up screen image
You can register sounds and start-up screen images that come with the included
software to the camera. Refer to the Software Starter Guide for details.
138
(EC256)_CDI-E404_Guide_E.book Page 139 Friday, February 6, 2009 7:44 PM
9
Useful Information
This chapter introduces how to use the AC adapter kit (sold
separately), troubleshooting tips and contains lists of functions. The
Y
P
O
index also appears at the end.
C
139
(EC256)_CDI-E404_Guide_E.book Page 140 Friday, February 6, 2009 7:44 PM
Using Household Power
If you use AC Adapter Kit ACK-DC40 (sold separately), you can use the
camera without worrying about how much charge is left in the battery.
The DR-40 coupler included with the adapter kit cannot be used with this
camera.
Turn off the camera.
Plug the cord into the camera.
● Open the cover and fully insert the plug
into the camera's terminal.
Y
P
O
Connect the power cord.
● Connect the power cord to the compact
power adapter, then plug the other end
into a power outlet.
● You can turn the camera on to use it.
● After you finish, turn off the camera and
unplug the power cord from the power
outlet.
C
Do not unplug the plug or power cord with the camera turned on. This
could erase images you have taken or damage the camera.
140
(EC256)_CDI-E404_Guide_E.book Page 141 Friday, February 6, 2009 7:44 PM
Changing the Strap
Using the Shoulder and Neck Strap Set STP-DC1 (Sold Separately) or
Carabiner Strap STP-DC2 (Sold Separately), you can easily change straps
to suit your location.
Changing the Strap.
● Using the instructions on p. 13 remove the
wrist strap from the camera and attach the
desired strap.
Y
P
O
● You can adjust the length of the shoulder
strap.
C
● You can remove the carabiner from the
supplied strap mount.
141
(EC256)_CDI-E404_Guide_E.book Page 142 Friday, February 6, 2009 7:44 PM
Changing the Strap
Neck strap
Shoulder strap
Carabiner strap
Do not use the neck, shoulder, or carabiner straps in water. While
underwater, use the wrist strap included with this unit (p. 2).
C
142
Y
P
O
(EC256)_CDI-E404_Guide_E.book Page 143 Friday, February 6, 2009 7:44 PM
Changing the Front Cover
You can change the front cover using the Front Cover Set FC-DC1 (Sold
Separately).
Remove the screws.
● Using the tool included in the accessory
set, remove the two screws.
● Take care not to lose the screws.
However, spare screws are included with
the accessory set.
Y
P
O
Remove the front cover.
● Using the removal tab, lift the cover in the
direction of the arrow to remove.
Removal tab
C
Put on a new cover.
● Place the desired cover as shown in the
image, and press it until it clicks into
place.
● Make sure there is no space between the
front cover and the camera.
Screw in the cover.
● Replace the screws removed in Step 1.
Do not remove other screws besides the two on the front cover.
143
(EC256)_CDI-E404_Guide_E.book Page 144 Friday, February 6, 2009 7:44 PM
Troubleshooting
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the power button, but nothing happened.
• Confirm that the battery is properly inserted (p. 18).
• Confirm that the memory card/battery cover is securely closed (p. 19).
• If the battery terminals are dirty, battery performance will decrease. Clean the
terminals with a cotton swab and re-insert the battery several times.
Battery is consumed quickly.
• Battery performance decreases at low temperatures. Warm the battery by such
methods as placing them in your pocket with the terminal cover on.
TV output
Y
P
O
Image is distorted or not showing on TV (p. 109).
Shooting
Cannot shoot.
• When in playback (p. 29), press the shutter button halfway (p. 25).
Camera screen is black at start-up.
C
• Images that have been edited on a computer, have had their name changed, or
that have been taken with another camera may not display correctly when set as
a start-up screen.
Screen does not display properly in dark places (p. 46).
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded
in movies.
• When the camera is subjected to powerful light sources, the display may
darken.
• Under fluorescent lighting, the screen may flicker.
• When shooting bright light sources, a bar of light (purplish red) may appear on
the screen.
The h icon blinks when you try to shoot (p. 28).
appears when the shutter button was pressed halfway (p. 60).
•
•
•
•
Set the [IS mode] to [Continuous] (p. 136).
Set the flash to h (p. 68).
Increase the ISO speed (p. 73).
Attach the camera to a tripod.
144
(EC256)_CDI-E404_Guide_E.book Page 145 Friday, February 6, 2009 7:44 PM
Troubleshooting
Image is blurred.
•
•
•
•
•
Press the shutter button halfway to focus, then shoot (p. 25).
Shoot the subject within the focusing distance (p. 157).
Set the [AF-assist Beam] to [On] (p. 134).
Confirm that functions which you do not intend to use (macro, etc.) are not set.
Shoot using the focus lock or AF lock (pp. 78, 82).
Even when you press the shutter button halfway, the frame does
not appear, and the camera does not focus.
• If you center on the light and dark contrasting area of the subject and press the
shutter button halfway, or repeatedly press the shutter button halfway, the frame
will appear and the camera will focus.
Subject is too dark.
•
•
•
•
Set the flash to h (p. 68).
Adjust the brightness with exposure compensation (p. 72).
Adjust the brightness with the i-Contrast function (pp. 87, 122).
Use the AE lock, or spot metering to shoot (p. 85).
Y
P
O
Subject is too bright (overexposed).
•
•
•
•
Set the flash to ! (p. 60).
Adjust the brightness with exposure compensation (p. 72).
Use the AE lock, or spot metering to shoot (p. 85).
The subject is too bright due to ambient lighting.
C
Image is dark even though the flash fired (p. 28).
• Increase the ISO speed (p. 73).
• Shoot within an appropriate distance for flash photography (p. 68).
Image taken using the flash is too bright (overexposed).
• Shoot within an appropriate distance for flash photography (p. 68).
• Set the flash to ! (p. 60).
White dots appear on the image when shooting with the flash.
• Light from the flash has reflected off dust particles or other objects in the air.
Image appears rough or grainy.
• Shoot with the ISO speed on a lower setting (p. 73).
• Depending on the shooting mode, when shooting in a high ISO speed the image
may appear rough or grainy (p. 59).
Eyes appear red (p. 88).
• Set the [Red-Eye Lamp] to [On] (p. 134). When shooting with the flash, the lamp
(on the front of the camera) lights (p. 42), and for approximately 1 second while
the camera is reducing red-eye, it is not possible to shoot. It is more effective if
the subject is looking directly at the lamp. Even better results can be obtained by
increasing the lighting in indoor settings or approaching closer to the subject.
145
(EC256)_CDI-E404_Guide_E.book Page 146 Friday, February 6, 2009 7:44 PM
Troubleshooting
Recording images to the memory card takes a long time, or
continuous shooting slows down.
• Perform a low-level format of the memory card in the camera (p. 52).
When you can’t make settings for shooting functions or FUNC.
menu.
• The items in which settings can be made differ depending on the shooting
mode. Refer to “Functions Available in Each Shooting Mode” (pp. 150 – 153).
Shooting movies
Correct shooting time does not display, or stops.
• Format the memory card in the camera, or use a memory card capable of
recording at high speeds. Even when the shooting time does not display
properly, the video recorded will be the length that it was actually shot (p. 33).
displayed on the LCD monitor, and shooting ended
automatically.
Y
P
O
Camera’s internal memory was insufficient. Try one of the following.
• Perform a low-level format of the memory card in the camera (p. 52).
• Lower the recorded pixels (p. 97).
• Use a memory card capable of recording at high speeds.
Zoom does not operate.
• You can use the digital zoom while recording, but not the optical zoom (p. 98).
Playback
C
Cannot play back images or movies.
• If the file name or folder structure is changed on a computer, you may not be
able to play back images or movies. Refer to the Software Starter Guide for
information regarding folder structure or file names.
Playback stops, or audio cuts out.
• Use a card that has been formatted on this camera (pp. 24, 52).
• If you copy a movie to a memory card that reads slowly, playback may interrupt
momentarily.
• You may experience frame dropping and audio breakup when playing back a
movie on a computer with insufficient system resources.
146
(EC256)_CDI-E404_Guide_E.book Page 147 Friday, February 6, 2009 7:44 PM
List of Messages that Appear on the Screen
If error messages appear on the LCD monitor, try one of the following
solutions.
No memory card
• The memory card is not installed in the correct direction. Install the memory card
in the correct direction (p. 18).
Card locked!
• The SD memory card or SDHC memory card’s write protect tab is set to “LOCK”.
Unlock the write protect tab (p. 18).
Cannot record!
• You attempted to shoot an image without the a memory card, or with a memory
card installed incorrectly. Install the memory card in the correct direction when
shooting (p. 18).
Memory card error (p. 52)
• Contact your Canon Customer Support Help Desk as there may be a problem
with the camera.
Memory card full
Y
P
O
• There is not enough free space on the memory card to shoot (pp. 26, 55, 67, 79)
or edit images (pp. 119 – 123). Erase the images (pp. 29, 110) to open space for
new images, or insert an empty memory card (p. 18).
Change the battery pack (p. 18)
No image.
C
• There are no images recorded on the memory that can be displayed.
Protected! (p. 114)
Unidentified Image/Incompatible JPEG/Image too large./RAW
• Unsupported images or data, or corrupted image data cannot be displayed.
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not display.
Cannot magnify!/Cannot rotate/Cannot modify image/Cannot
register this image!/Cannot modify/Cannot assign to category
• Incompatible images cannot be magnified (p. 108), rotated (p. 118), edited
(pp. 119 – 123), registered to the start-up screen (p. 138), categorized (p. 116),
or added to a print list (p. 125).
• Images manipulated on a computer, that have had their file name changed, or
have been taken with a different camera may not be magnified, rotated, edited,
registered to the start-up screen, categorized, or added to a print list.
• Movies cannot be magnified (p. 108), edited (pp. 119 – 123), added to a print list
(p. 124), or registered to the start-up screen (p. 138).
147
(EC256)_CDI-E404_Guide_E.book Page 148 Friday, February 6, 2009 7:44 PM
List of Messages that Appear on the Screen
Cannot select!
• When selecting the selection range (pp. 111, 115, 117, 127), you tried to select
a starting image that was after the last image or you tried to select an ending
image that was before the starting image.
• You tried to select more than 501 images in the selection range (pp. 111, 115,
117, 127).
Too many marks.
• You selected more than 998 images to print settings. Select less than 998
images (p. 125).
Cannot complete!
• Print settings could not be saved correctly. Reduce the number of selected
images and try again (p. 125).
Naming error!
• The file name could not be created because there is an image with the same
name as the folder that the camera is attempting to create, or the highest
possible file number has already been reached (p. 132). In the 3 menu, change
[File Numbering] to [Auto reset] (p. 132) or format the memory card (pp. 24, 52).
Communication error
Y
P
O
• Images could not be transferred to the computer or printed due to the large
amount of images (approx. 1000) stored on the memory card. Use a
commercially available USB card reader to transfer the images. To print, insert
the memory card into the printer’s card slot to print.
C
Lens error, restart camera
• A lens error was detected. Press the power button to turn the camera off and
back on (p. 42). If this error message continues to display, contact your Canon
Customer Support Help Desk as there may be a problem with the lens.
Exx (xx: number)
• A camera error was detected. Press the power button to turn the camera off and
back on (p. 42).
• If an error code displays directly after taking a picture, the shot may not have
been recorded. Check image in playback mode.
• If this error code reappears, note the number and contact your Canon Customer
Support Help Desk as there may be a problem with the camera.
148
(EC256)_CDI-E404_Guide_E.book Page 149 Friday, February 6, 2009 7:44 PM
C
Y
P
O
149
(EC256)_CDI-E404_Guide_E.book Page 150 Friday, February 6, 2009 7:44 PM
Functions Available in Each Shooting Mode
Shooting modes
Function
Exposure Compensation (p. 72)/Exposure Shift (p. 97)
h
…
!
All Range
Flash (pp. 60, 68, 86)
e
u
Focusing Zone (p. 69, 83)
AF Lock (p. 82)
AE Lock / FE Lock (pp. 85, 86)
TV Display (p. 77)
C
Information Display (p. 44)
ISO Speed (p. 73)
White Balance (p. 74)
My Colors (p. 75)
G
—
{
—
—
{
{
—
—
—
—
{
{
{
{
—
—
{
{
{
Information Display
No Information Display
K
I
J
F
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
*6
{
—
{
—
—
{
{
{
{
{
—
—
{
{
{
{
{
{
*6
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
—
{
—
{
{
{
{
{
—
{
—
{
—
{
—
{
—
{
—
—
{
—
—
—
Y
P
O
Ò Î
"
$ *1
Self-Timer (pp. 64, 65, 76, 77)
ƒ
FUNC. Menu
S
{
{
{
{
{
Metering Mode (p. 85)
—
{ — — —
{
{
{
{
{
Drive Mode (p. 72)
—
{
{
{
{
W
Image Quality (Compression Ratio) (p. 70)
{
{
{
{
{
{
{
{
{
{
Recording Pixels (pp. 70, 96)
—
— — — —
*1 Possible settings: 0 – 30 seconds in [Delay], and 1 – 10 shots in [Shots].
*2 FE Lock is unavailable. *3 ISO3200 (p. 59) is set by default. *4
is set by default.
150
(EC256)_CDI-E404_Guide_E.book Page 151 Friday, February 6, 2009 7:44 PM
Functions Available in Each Shooting Mode
K
V
H
U
t
≈
w
S
y
O
P
Z
{
{
{
—
{
—
{
—
—
{
{
{
{
{
—
—
{
{
{
{
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
*6
{
—
{
—
—
{
{
{
{
{
—
—
{
{
{
{
—
—
—
{
—
{
—
—
—
{
{
—
{
—
—
{
{
{
—
—
{
*6
{
—
{
{
{
—
{
{
{
{
{
—
{
{
{
{
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
—
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
—
—
—
—
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
{
—
{
—
{
—
{
—
{
—
{
—
{
—
{
—
—
{
{
{
{
—
{
—
{
—
{
—
—
—
—
—
{
—
—
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
*5
C
E
TY xv X >z
—
{
{
—
{
—
{
{
{
{
{
{
—
—
—
—
{
{
—
{
—
{
{
{
—
{
{
{
—
{
{
—
—
—
—
—
{
—
{
—
—
—
—
—
{
{
{
{
{
{
—
—
{
*2
{
{
{
—
—
—
—
—
—
{
{
{
{
{
{
—
—
—
—
{
{
—
{
—
{
{
{
—
{
{
{
—
{
—
{
{
—
Y
P
O
FUNC. Menu
{
{
— —
{
{
— —
{
—
{
—
{
—
{
—
{
—
—
—
—
—
{
—
{
{
{
{
—
{
—
{
{
{
{
—
*3
{
{
{
{
{
—
—
—
—
—
{
{
{
{
{
{
{
—
—
—
{
{
{
—
—
*4
{
*5
—
—
—
—
—
{
{
{ Selectable — Not selectable
is not selectable. *6 Not selectable, but turned on when the flash is fired.
151
(EC256)_CDI-E404_Guide_E.book Page 152 Friday, February 6, 2009 7:44 PM
Menus
4 Shooting Menu
Shooting modes
ƒ
G
Face AiAF
{
Center
—
AF Frame Size (p. 80)
Normal/Small
Servo AF (p. 82)
On/Off
K
I
J
{
{
{
{
{
{
{
{
—
{
—
—
—
—
{
{
{
{
Standard/Off
{
{
{
{
{
1.5x / 2.0x
{
{
{
{
{
AF-Point Zoom (p. 81)
On/Off
{
{
{
{
{
AF-assist Beam (p. 134)
On/Off
{
{
{
{
{
MF-Point Zoom (p. 83)
On/Off
—
{
{
{
{
Flash Settings
(pp. 88, 134)
Red-Eye Corr.
On/Off
{
{
{
{
{
Red-Eye Lamp On/Off
{
{
{
{
{
i-Contrast (p. 87)
Off/Auto
*1
{
—
—
—
Review (p. 135)
C
Function
AF Frame (p. 80)
Digital Zoom (p. 61)
Review Info (p. 135)
Blink Detection (p. 89)
Disp. Overlay (p. 135)
IS Mode (p. 136)
Date Stamp (p. 63)
Y
P
O
Off/2 – 10 sec./Hold
{
{
{
{
{
Off/Detailed/Focus Check
{
{
{
{
{
On/Off
{
{
{
{
{
Off/Grid Lines
{
{
{
{
{
3:2 Guide/Both
{
{
{
{
{
Continuous/Off
*1
{
{
{
{
Shoot Only/Panning
—
{
{
{
{
Off/Date/Date & Time
{
{
{
{
{
{
{
{
{
{
Set c button (p. 136)
*1 Always [On]. *2 Available when h is selected.
152
F
(EC256)_CDI-E404_Guide_E.book Page 153 Friday, February 6, 2009 7:44 PM
Menus
K
E
TY xv X >z
V
H
U
t
≈
w
S
y
O
P
Z
{
{
{
—
{
{
{
{
{
{
{
{
—
—
{
{
{
—
{
{
{
{
{
{
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
{
—
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
—
—
—
{
—
{
{
{
{
{
{
{
{
{
{
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
{
—
{
{
{
*2
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
—
—
—
{
{
{
—
{
{
{
{
{
{
—
—
—
—
—
{
{
{
—
{
{
{
{
{
{
—
{
{
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
{
—
—
{
—
{
{
{
—
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
—
—
{
{
{
{
{
{
{
{
{
{
—
{
—
—
—
{
{
{
{
{
{
{
{
{
{
{
{
{
{
{
C
Y
P
O
—
{ Selectable — Not selectable
153
(EC256)_CDI-E404_Guide_E.book Page 154 Friday, February 6, 2009 7:44 PM
Menus
3 Set up Menu
Item
Options/Summary
Ref. Page
Mute
On/Off*
p. 49
Volume
Set all operation sounds (5 levels).
p. 49
Sound Options
Set the sounds played for each camera
operation.
p. 137
LCD Brightness
Set within a range of ±2.
p. 50
Start-up Image
Add an image as start-up image.
p. 138
Format
Formats card, erasing all data.
File Numbering
Continuous*/Auto Reset
p. 132
Create Folder
Create New Folder/Auto Create
p. 132
Auto Rotate
On*/Off
p. 133
Power Saving
Auto Power Down: On*/Off
Display Off: 10, 20 or 30 sec./1*, 2 or 3 min.
Time Zone
Home/World
p. 131
Date/Time
Date and time settings.
p. 22
Distance Units
Video System
Language
Reset All
* Default setting
154
C
m/cm*
ft/in
Y
P
O
NTSC/PAL
pp. 24, 52
pp. 53, 130
p. 83
p. 109
Select displayed language.
p. 23
Returns camera to default settings.
p. 51
(EC256)_CDI-E404_Guide_E.book Page 155 Friday, February 6, 2009 7:44 PM
Menus
1 Playback Menu
Item
Options/Summary
Ref. Page
Slideshow
Plays back images and movies automatically.
p. 105
My Category
Categorizes images and movies.
p. 116
Erase
Erases images and movies.
p. 110
Protect
Protects images and movies.
p. 114
i-Contrast
Corrects dark portions of images.
p. 122
Red-Eye Correction
Corrects red eyes in images.
p. 123
Trimming
Trims portions of images.
p. 120
Resize
Resizes and saves images.
p. 119
My Colors
Adjusts colors in images.
p. 121
Rotate
Rotates images and movies.
p. 118
Y
P
O
Resume
Last seen*/Last shot
p. 137
Transition
Fade*/Slide 1/Slide 2/Off
p. 108
* Default setting
C
2 Print Menu
Item
Print
Options/Summary
Ref. Page
Displays printing screen.
p. 30
Selects individual images for printing.
p. 126
Select Range
Selects starting and ending images for printing.
p. 127
Select All Images
Selects all images for printing.
p. 127
Select by Date
Selects images for printing by date.
p. 127
Select by Category
Selects images for printing by category.
p. 127
Select by Folder
Selects images for printing by folder.
p. 127
Clear All Selections
Cancels all settings for printing.
p. 128
Print Settings
Sets the printing style.
p. 125
Select Images & Qty.
155
(EC256)_CDI-E404_Guide_E.book Page 156 Friday, February 6, 2009 7:44 PM
Handling Precautions
Equipment
• This camera is a high-precision electronic device. Do not allow it to fall a
great distance or subject it to excessive impacts.
• Never place the camera close to magnets or motors that generate strong
electromagnetic fields. Exposure to strong magnetic fields may cause
malfunctions or corrupt image data.
• If water droplets have fallen or dirt is stuck on the camera or LCD monitor,
wipe with a dry soft cloth or eyeglass wiper. Do not rub or apply force.
• Never use cleaners containing organic solvents to wipe the camera or
LCD monitor.
• Use a commercially available blower brush to remove dust from the lens.
For stubborn dirt contact the closest Canon Customer Support Help Desk
as listed on the customer support leaflet supplied with your camera.
• When you move the camera rapidly from cold to hot temperatures,
condensation may form on the internal or external surfaces of the camera.
To avoid condensation, put the camera in an airtight, resealable plastic
bag and let it adjust to temperature changes slowly before removing it
from the bag.
• If condensation has occurred, opening the memory card/battery cover or
terminal cover could cause damage. Do not open the covers until the
moisture has completely evaporated.
C
Y
P
O
For handling instructions after the camera has been used underwater,
please see Cautions After Using This Camera and Camera Care (p. 15).
Memory Cards
• A memory card is a high-precision electronic device. Do not bend, apply
force or subject it to strong impacts. Doing so may corrupt image data
recorded on the memory card.
• Do not spill liquids on the memory card. Do not touch the memory card’s
terminals with your hands or metallic objects.
• Do not store memory cards near a TV, speakers or other devices that
generate magnetic fields or static electricity. Doing so may corrupt image
data recorded on the memory card.
• Do not store memory cards in hot, humid or dusty locations.
156
EC256_09-Appendix.fm Page 157 Thursday, March 26, 2009 1:39 PM
Specifications
Camera Effective Pixels. . . . . . . . . . . Approx. 12.1 million
Image Sensor . . . . . . . . . . . . . . . . . . 1/2.3-inch type CCD (Total number of pixels:
Approx. 12.7 million)
Lens . . . . . . . . . . . . . . . . . . . . . . . . . . 6.2 (W) – 18.6 (T) mm
35mm film equivalent: 35 (W) – 105 (T) mm
F2.8 (W) – F4.9 (T)
Waterproof Capability . . . . . . . . . . . . Meets JIS/ IEC protection class IPX8*
For use within a depth of 10 meters
Dustproof Capability . . . . . . . . . . . . . Meets JIS/ IEC protection class IP6X*
Shock Resistant Capability . . . . . . . . Canon standard based on MIL Standard 810F
Method 516.5 Selecting Procedure IV (A US
Defense Standard) *
Testing Conditions:
• Drop height: 1.22 m (4 ft.).
• Drop surface: Wood.
• Drop direction: Each surface (6 surfaces), each
angle (4 angles) for a total of 10.
• Number of drops: Each surface and each angle 3
times for a total of 30.
* The camera is subjected to Canon standard testing
conditions. However, it is not guaranteed that this
camera will not damage or malfunction.
Y
P
O
Digital Zoom. . . . . . . . . . . . . . . . . . . . Approx. 4.0x (Up to approx. 12x in combination
with the optical zoom)
LCD Monitor. . . . . . . . . . . . . . . . . . . . 2.5 inch-type TFT LCD color monitor
Approx. 230,000 dots, Picture coverage 100%
AF Frame Mode. . . . . . . . . . . . . . . . . Face AiAF/Center
Servo AF . . . . . . . . . . . . . . . . . . . . . . On / Off
Focusing Range (from end of lens) . . Auto: 3 cm (1.2 in.) – infinity (W)/30 cm (1.0 ft.) –
infinity (T)
Normal: 30 cm (1.0 ft.) – infinity
Macro: 3 – 50 cm (1.2 in. – 1.6 ft.) (W)/30 – 50 cm
(1.0 – 1.6 ft.) (T)
Infinity: 3 m (9.8 ft.) – infinity
Manual Focus: 3 cm (1.2 in.) – infinity (W)/30 cm
(1.0 ft.) – infinity (T)
Kids&Pets: 1 m (3.3 ft.) – infinity
Shutter . . . . . . . . . . . . . . . . . . . . . . . . Mechanical shutter and electronic shutter
Shutter Speed . . . . . . . . . . . . . . . . . . 1 – 1/1500 sec.
15 – 1/1500 sec. (Total shutter speed range)
Image Stabilization . . . . . . . . . . . . . . Lens-shift type
Metering Type . . . . . . . . . . . . . . . . . . Evaluative, Center-weighted average or Spot
Exposure Compensation . . . . . . . . . . ±2 stops in 1/3-stop increments
ISO speed (Standard Output Sensitivity, Recommended Exposure Index)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto, ISO 80 / 100 / 200 / 400 / 800 / 1600
White Balance . . . . . . . . . . . . . . . . . . Auto, Day Light, Cloudy, Tungsten, Fluorescent,
Fluorescent H, Underwater, Custom
Built-in Flash . . . . . . . . . . . . . . . . . . . Auto, On, Slow Synchro, Off
* Red-eye reduction/Red-eye correction settings
available
Built-in Flash Range . . . . . . . . . . . . . 30 cm – 3.2 m (1.0 – 10 ft.) (W)/
30 cm – 2.0 m (1.0 – 6.6 ft.) (T)
Shooting Modes. . . . . . . . . . . . . . . . . . Shooting mode: Auto, Program AE, SCN, Movie
Special Scene Mode: Portrait, Landscape, Night Snapshot,
C
157
(EC256)_CDI-E404_Guide_E.book Page 158 Friday, February 6, 2009 7:44 PM
Specifications
Kids&Pets, Indoor, Sunset, Fireworks, Long
Shutter, Beach, Underwater, Aquarium, Foliage,
Snow, ISO3200, Color Accent, Color Swap, Stitch
Assist
Movie mode: Standard, Color Accent, Color Swap
Continuous Shooting . . . . . . . . . . . . .Approx. 1.1 images/sec.
Self-timer . . . . . . . . . . . . . . . . . . . . . .FaceSelf-Timer, Approx. 10 sec./Approx. 2-sec.
delay, Custom Timer
i-Contrast . . . . . . . . . . . . . . . . . . . . . .Off/Auto
Recording Media . . . . . . . . . . . . . . . .SD memory card, SDHC memory card,
MultiMediaCard, MMCplus memory card, HC
MMCplus memory card
File Format . . . . . . . . . . . . . . . . . . . . .Design rule for camera file system and DPOF
compliant
Data Type . . . . . . . . . . . . . . . . . . . . .Still images: Exif 2.2 (JPEG)
Movies: MOV (Image data: H.264, Audio data:
Linear PCM) (Mono)
Compression . . . . . . . . . . . . . . . . . . .Fine, Normal
Number of Recording Pixels
(Still images) . . . . . . . . . . . . . . . . . . .Large: 4000 × 3000 pixels
Medium 1: 3264 × 2448 pixels
Medium 2: 2592 × 1944 pixels
Medium 3: 1600 × 1200 pixels
Small: 640 × 480 pixels
Widescreen: 4000 × 2248 pixels
(Movies) . . . . . . . . . . . . . . . . . . . . . . .640 × 480 pixels (30 frames/sec.)
320 × 240 pixels (30 frames/sec.)
Number of Possible Shots . . . . . . . . .Approx. 220 images (Based on CIPA standardized
measurement)
Audio . . . . . . . . . . . . . . . . . . . . . . . . .Quantization: 16 bit
Sampling Rate: 44.100 kHz
Playback Function . . . . . . . . . . . . . . .Single Image Playback, Video Playback,
Magnified Focus, Index Playback, Magnified
Playback, Jump, Slideshow
Editing Function . . . . . . . . . . . . . . . . .Erase, Protect, My Category, Resize, My Colors, iContrast, Trimming, Rotate, Red-Eye Correction
Direct Print Type . . . . . . . . . . . . . . . .PictBridge capable
Interface . . . . . . . . . . . . . . . . . . . . . . . . Hi-Speed USB (Dedicated connector (female) with
unified type of digital, audio and video*)
* mini-B compatible
Communication Settings . . . . . . . . . .MTP, PTP
Power . . . . . . . . . . . . . . . . . . . . . . . . .Battery Pack NB-6L (rechargeable lithium-ion
battery)
AC adapter kit ACK-DC40
Operating Temperatures* . . . . . . . . .-10 – 40 °C (14 – 104 °F)
* The NB-6L battery pack is not designed for -10 –
0°C (14 – 32 °F) conditions. As a result, it may
temporarily not function optimally.
Operating Humidity . . . . . . . . . . . . . .10 – 90%
Dimensions (excluding protrusions) . .103.6 × 66.9 × 48.8 mm (4.08 × 2.63 × 1.92 in.)
Weight (camera body only) . . . . . . . .Approx. 190 g (6.7 oz.)
C
158
Y
P
O
(EC256)_CDI-E404_Guide_E.book Page 159 Friday, February 6, 2009 7:44 PM
Specifications
Battery Pack NB-6L
Type. . . . . . . . . . . . . . . . . . . . . . . . . . Rechargeable lithium-ion battery
Voltage. . . . . . . . . . . . . . . . . . . . . . . . 3.7 V DC
Capacity. . . . . . . . . . . . . . . . . . . . . . . 1000 mAh
Charging cycles . . . . . . . . . . . . . . . . . Approx. 300 times
Operating temperature. . . . . . . . . . . . 0 – 40 °C (32 – 104 °F)
Dimensions . . . . . . . . . . . . . . . . . . . . 34.4 × 41.8 × 6.9 mm (1.35 × 1.65 × 0.27 in.)
Weight . . . . . . . . . . . . . . . . . . . . . . . . Approx. 21 g (0.74 oz.)
Battery Charger CB-2LY/CB-2LYE
Rated input . . . . . . . . . . . . . . . . . . . . 100 – 240 V AC (50/60 Hz), 0.085 A (100 V) – 0.05
A (240 V)
Rated output . . . . . . . . . . . . . . . . . . . 4.2 V DC, 700 mA
Charge time . . . . . . . . . . . . . . . . . . . . Approx. 1 hour 55 min.
Operating temperature. . . . . . . . . . . . 0 – 40 °C (32 – 104 °F)
Dimensions . . . . . . . . . . . . . . . . . . . . 58.6 × 86.4 × 24.1 mm (2.31 × 3.40 × 0.95 in.)
Weight . . . . . . . . . . . . . . . . . . . . . . . . Approx. 70 g (2.47 oz.) (CB-2LY)
Approx. 61 g (2.15 oz.) (CB-2LYE, excluding
power cord)
Y
P
O
• All data is based on tests by Canon.
• The finished product, or exterior may differ from this report.
About MPEG-4 Licensing
C
This product is licensed under AT&T patents for the MPEG-4 standard and may be used
for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video that
was encoded only (1) for a personal and non-commercial purpose or (2) by a video
provider licensed under the AT&T patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.
* Notice displayed in English as required.
USA and Canada only:
The Lithium ion/polymer battery that powers the product is
recyclable.
Please call 1-800-8-BATTERY for information on how to
recycle this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material - special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
159
(EC256)_CDI-E404_Guide_E.book Page 160 Friday, February 6, 2009 7:44 PM
Index
Numerics
3:2 Guide ................................................ 135
A
AC Adapter Kit .................................. 40, 140
Accessories .............................................. 38
AE Lock .............................................. 85, 97
AF Assist Beam ...................................... 134
AF Frame ................................................. 27
AF Focus
AF Lock .................................................... 82
Aquarium (Scene Mode) .......................... 58
AV Cable ............................................ 2, 109
B
C
Camera
Default Settings ..................................... 51
Holding .................................................. 13
Camera Shake ................................. 60, 136
Clock Functions ........................................ 53
Color Accent
(Scene Mode) ..................................... 91, 96
Color Swap
(Scene Mode) ..................................... 92, 96
Components Guide .................................. 42
Compression Ratio
Image Quality (Compression Ratio)
Continuous Shooting ................................ 72
D
Date and Time
Adding to Image .................................... 63
Changing ............................................... 22
Date/Time Battery ................................. 22
Setting ................................................... 21
Date/Time Date and Time
160
E
Editing
i-Contrast ............................................ 122
My Colors ............................................ 121
Red-Eye Correction ............................ 123
Resizing (Making Images Smaller) ..... 119
Trimming ............................................. 120
Enlarged Display .................................... 108
Erasing ..................................................... 29
Erasing All Images ................................. 110
Error Messages ...................................... 147
Exposure
AE Lock ................................................. 85
Compensation ....................................... 72
FE Lock ................................................. 86
Y
P
O
Battery
Battery Charger ........................... 2, 16, 40
Charge Indicator ................................... 17
Charging ............................................... 16
Date/Time Battery ................................. 22
Power Saving ........................................ 53
Beach (Scene Mode) ................................ 58
Black and White Images ........................... 75
C
Default Settings ........................................ 51
DIGITAL CAMERA
Solution Disk ........................................ 2, 36
Digital Tele-Converter .............................. 62
Digital Zoom ............................................. 61
Disp. Overlay .......................................... 135
Display Language ..................................... 23
DPOF ............................................. 124, 125
F
Face AiAF ................................................. 80
Face Select .............................................. 84
Face Self-Timer ........................................ 65
FE Lock .................................................... 86
File Number ............................................ 132
Fireworks (Scene Mode) .......................... 57
Flash
Off ......................................................... 60
On ......................................................... 68
Slow Synchro ........................................ 86
Supplementary Flash ............................ 40
Focus
AF Frame .............................................. 27
AF Frame Mode .................................... 80
AF Lock ................................................. 82
AF-Point Zoom ...................................... 81
Face Select ........................................... 84
Servo AF ............................................... 82
Focus Check .......................................... 107
Focus Lock ............................................... 78
Foliage (Scene Mode) .............................. 58
(EC256)_CDI-E404_Guide_E.book Page 161 Friday, February 6, 2009 7:44 PM
Index
Format ...................................................... 24
Low Level Format .................................. 52
FUNC. Menu
Basic Operations ................................... 47
List ...................................................... 150
G
Grid Lines ............................................... 135
H
High ISO Speed .................................. 59, 73
High-Power Flash ..................................... 40
Histogram ................................................. 46
Household Power ................................... 140
I
Y
P
O
i-Contrast .......................................... 87, 122
Image
Editing Editing
Erasing Images ..................................... 29
Playback Viewing
Protect ................................................. 114
Image Quality (Compression Ratio) ......... 70
Indicator .............................................. 43, 46
Indoor (Scene Mode) ................................ 57
Infinity ....................................................... 69
Interface Cable ..................................... 2, 30
ISO Speed ................................................ 73
ISO3200 (Scene Mode) ............................ 59
K
C
Formatting .......................................24, 52
Recordable Number of Images .............71
Menu
Basic Operations ...................................48
List .......................................................152
Metering Mode .......................................... 85
MMCplus/HC MMCplus Memory Card
Memory Card
Movie
Editing ................................................... 99
Estimated Shooting Time ......................97
Image Quality (Frame Rate) ..................96
Mode .....................................................96
Recording Pixels ...................................97
Shooting Time .......................................33
Viewing (Playback) ................................34
MultiMedia Card Memory Card
My Category ...........................................116
My Colors .........................................75, 121
Kids&Pets (Scene Mode) ......................... 57
L
Lamp ......................................................... 42
Red-Eye Reduction Lamp ................... 134
Landscape (Scene Mode) ........................ 56
Language Settings .................................... 23
LCD Monitor Screen
Long Shutter (Scene Mode) ..................... 90
Low Level Format ..................................... 52
M
Macro Mode .............................................. 69
Manual Focus ........................................... 83
Memory Card ............................................ 20
Available Shots ..................................... 20
N
Night Snapshot (Scene Mode) .................57
Number of Shots .......................................17
P
Panoramic image ......................................94
PictBridge .................................................30
Playback Button ..................................29, 43
Playback Viewing
Portrait (Scene Mode) ..............................56
Postcard Size ...........................................71
Power Button ............................................42
Power Battery
Power Saving ...................................53, 130
Print List ..................................................124
Printer .......................................................30
Printing .....................................................30
Program AE ..............................................68
R
Recording Pixels (Image Size) .................70
Red-Eye
Correction ............................................123
Red-Eye Correction ...............................88
Reduction ............................................134
Red-Eye Reduction Lamp ......................134
Resizing (Making Images Smaller) .........119
Rotating Images .....................................118
161
(EC256)_CDI-E404_Guide_E.book Page 162 Friday, February 6, 2009 7:44 PM
Index
S
V
Scene Mode ............................................. 56
Screen
Display Language ................................. 23
Information Displayed ........................... 44
Menu Operations ............................ 47, 48
Switching the Display ...................... 44, 45
SD/SDHC Card Memory Card
Self-Timer
10 second Self-Timer ............................ 64
Changing Delay and Number of Shots . 77
Face Self-Timer .................................... 65
Two Second Self-Timer ........................ 76
Sepia Tones ............................................. 75
Servo AF .................................................. 82
Shooting Date and Time Date and Time
Shooting/Movie Button ............................. 42
Shutter Button .......................................... 25
Slideshow ............................................... 105
Snow (Scene Mode) ................................. 58
Software
DIGITAL CAMERA
Solution Disk ..................................... 2, 36
Transferring Images to a Computer ...... 35
Sound ....................................................... 49
Stitch Assist (Scene Mode) ...................... 94
Strap ..................................................... 2, 13
Changing ............................................. 141
Strap mount ................................................ 2
Sunset (Scene Mode) ............................... 57
Supplementary Flash ............................... 40
Video Movie
Viewing (Playback)
Enlarged Display ................................. 108
Filtered Playback ................................ 103
Index Display ...................................... 102
Single Image Playback ......................... 29
Slideshow ............................................ 105
Viewing Images on a TV ..................... 109
C
Y
P
O
T
Terminal ............................. 30, 36, 109, 140
Transferring Images to a Computer ......... 35
Transition ................................................ 108
Trimming ................................................ 120
Troubleshooting ...................................... 144
TV
Shooting Using a TV Monitor ................ 77
Viewing Images on a TV ..................... 109
U
Underwater (Scene Mode) ....................... 58
Using When Abroad ................................. 17
162
W
Waterproof Camera .................................. 14
Waterproof seal .................................. 18, 30
White Balance .......................................... 74
Widescreen (Recording Pixels) .......... 70, 71
World Clock ............................................ 131
Wrist Strap Strap
Z
Zoom ............................................ 27, 32, 61
(EC256)_CDI-E404_Guide_E.book Page 163 Friday, February 6, 2009 7:44 PM
FCC Notice
(Digital Camera, Model PC1352 systems)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions;
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for Class B
digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
Y
P
O
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
C
The cable with the ferrite core provided with the digital camera must be used with this
equipment in order to comply with Class B limits in Subpart B of Part 15 of the FCC
rules.
Do not make any changes or modifications to the equipment unless otherwise specified
in the manual. If such changes or modifications should be made, you could be required
to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516) 328-5600
Canadian Radio Interference Regulations
This Class B digital apparatus complies with Canadian ICES-003.
163
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Page Count : 163 Page Mode : UseNone Page Layout : SinglePage Create Date : 2009:02:06 19:43:19Z Creator : FrameMaker 7.0 Title : Producer : ilovepdf.com Modify Date : 2017:05:19 04:08:57+02:00EXIF Metadata provided by EXIF.tools