10/100/1000 UTP To 100/1000X Ethernet Media Converter Flex Point GX/T Catalogo Res Omnitron 2009 2010. Nov 09
User Manual: 10/100/1000 UTP to 100/1000X Ethernet Media Converter FlexPoint GX/T
Open the PDF directly: View PDF 
.
Page Count: 26
| Download | |
| Open PDF In Browser | View PDF |
2009 / 2010 Product Catalog Media Converters, Multiplexers and Network Interface Devices for Carrier Ethernet and Enterprise Networks About Omnitron Omnitron was founded in 1992 and is headquartered in Irvine California. Omnitron provides carrier-class fiber access connectivity solutions for Service Providers, Governments, Enterprises and Utilities who are driving fiber to the network’s edge to deliver advanced services, bandwidth and security. Omnitron solutions improve the flexibility, scalability and performance of any size network, from Enterprise Local Area Networks to Wide Area Networks, and Fiber Access Networks to Metropolitan Ethernet Networks. Omnitron’s managed and unmanaged fiber access media converters, Network Interface Devices, T1/E1 and CWDM multiplexers provide reliable fiber connectivity and leverage existing assets and infrastructure to reduce costs. This broad and diverse product offering supports a wide variety of network protocols, data rates and cabling media. Omnitron’s knowledgeable and dependable technical support staff is available 24/7 to assist you with your network applications or installations. Omnitron products are available through resellers, VARs, system integrators and distributors worldwide. Table of Contents iConverter® Managed Media Converters, Network Interface Devices, CWDM and T1 Multiplexers iConverter Product Family Overview......................................4 NetOutlook SNMP Management Software........................... 6 ♦NMM2 Network Management Module....................................7 iConverter Chassis Options...................................................8 ♦GM3 Ethernet Network Interface Devices (NIDs)................10 2FXM2 and 2GXM2 Fiber to Fiber NIDs...............................12 10/100M2 and GX/TM2 Copper to Fiber NIDs......................13 ♦XG 10 Gigabit Copper to Fiber or Fiber to Fiber..................14 GX/T 10/100/1000 Copper to Fiber........................................15 ♦GX AN Gigabit Copper to Fiber............................................16 GX/X and GX/F Fiber to Fiber................................................17 100FF and 1000FF Fiber to Fiber..........................................18 2Fx 100Mbps Fiber to Fiber...................................................19 10/100VT & 10/100 Copper to Fiber......................................20 100Fx/Tx, 10FL/T and 10T/2 Copper to Fiber.......................21 4Tx and 4TxVT 10/100 4-Port Switch Modules.....................22 Tx/2Fx and Tx/2Tx Redundant Fast Ethernet.......................23 iConverter Ethernet Module Comparison Chart...................24 T1/E1 and T3/E3 Copper to Fiber..........................................26 ♦4xT1/E1 MUX and TM3 T1/E1 Modular Multiplexer..............28 ♦T1/E1 MUX/M Up to 16 T1/E1 Circuits over Fiber................29 ♦4xT1/E1 MUX and 4xT1/E1MUX/M Four T1/E1s over Fiber..30 ♦X21/RS530 Serial to Fiber....................................................32 RS232 and RS422/485 Serial to Fiber...................................33 OC3FF and OC12FF Fiber to Fiber.......................................34 ♦xFF SFP to SFP Converter/Wavelength Transponder.........35 ♦ OC3/STM1 Coax to Fiber......................................................35 ♦CWDM/X Multiplexers/Demultiplexers for Dual Fiber..........36 ♦CWDM/AD Optical Add Drop Multiplexers for Dual Fiber....38 ♦CWDM/X and ♦CWDM/AD for Single Fiber..........................39 miConverterTM Miniature Unmanaged Media Converters Contact a Technical Specialist for more information: Toll-free: 800-675-8410 International: +1 949-250-6510 Fax: 949-250-6514 Email: info@omnitron-systems.com Website: www.omnitron-systems.com ♦GX/T 10/100/1000 Copper to Fiber.......................................40 Gx Gigabit Copper to Fiber....................................................40 10/100 and 10/100 Plus 10/100 Copper to Fiber....................41 FlexPointTM Modular Unmanaged Media Converters FlexPoint Chassis and Mounting Options..............................42 ♦GX/T 10/100/1000 Copper to 100/1000 Fiber......................43 Gx and 100Fx/Tx Copper to Fiber.........................................44 10/100 Copper to Fiber..........................................................45 10FL/T, 10FL/2, 10T/2 and 10AUI/T Copper to Fiber...........46 100FF, 1000FF, OC3FF and OC12FF Fiber to Fiber............47 T1/E1 Copper to Fiber............................................................48 232 Serial to Fiber..................................................................48 OmniConverterTM PoE Media Converters ♦GPoE/S 10/100/1000 Copper to 100 or 1000 Fiber.............49 Omnitron Small Form Pluggable Transceivers 2 SFP Transceivers Standard Wavelengths............................50 SFP Transceivers CWDM Wavelengths...............................51 ♦XFP and ♦SFP+ Transceivers for 10 Gigabit......................50 3 ♦New Products iConverter The iConverter family consists of managed media converters, Network Interface Devices (NIDs), CWDM Multiplexers and T1/E1 Multiplexers. This modular system provides fiber connectivity in Broadband Metropolitan, First Mile Fiber-to-the-X and Enterprise Local Area Network (LAN) applications. ® iConverter modules create a true multi-service platform that Product Family Overview Technologies Supported: Module Types: 10, 100, 1000 and 10 Gigabit Ethernet Copper UTP to Fiber 1/2/4/10 Gigabit Fibre Channel Fiber to Fiber T1(DS1)/E1, T3(DS3)/E3 Coax to Fiber OC-3, OC-12, OC-48, OC-192 4-Port Copper Switch STM-1, STM-4, STM-16, STM-64 T1/E1 Multiplexer Serial RS-232/422/485 and X21 CWDM Multiplexer Standard & CWDM SFP/SFP+/XFPs CWDM Transponder Service Provider Access Networks To support Carrier-Grade Ethernet services, iConverter Network Interface Devices feature: • IEEE 802.3ah Link OAM monitoring and trouble-shooting • IEEE 802.1ag End-to-End Service OAM Fault Detection and Management transports a variety of network protocols over existing fiber infrastructure and equipment. Flexible and easily scalable, iConverter modules are hot-swappable and can be mounted in a 19-Module, 5-Module, 2-Module or 1-Module powered chassis. • ITU-T Y.1731 End-to-End Service OAM Performance Monitoring Management for iConverter media converters and multiplexers is enabled by installing a management module in the same chassis as the media converters and multiplexers. iConverter Network Interface Devices (NIDs) are media converters with integrated management functions for service provisioning and Operation, Administration and Maintenance (OAM). The NIDs can also serve as a management module for other iConverter modules when installed in a chassis. • Class of Service (CoS) Traffic Classification Management functions can be accessed locally through the serial console port, or remotely through IP-based management protocols, including SNMPv1/2c/3, TELNET and FTP. Management VLAN provides protection for IP-based protocols by isolating the management data from user data. Management functions can also be accessed remotely through one of the supported IP-less protocols, either 802.3ah OAM extensions or Omnitron’s Secure OAM. Up to 18 remote NIDs and chassis can be managed by a single IP address using an IP-less protocol. SNMP management can be accessed either via Omnitron's NetOutlook® SNMP-based network management software, or third-party SNMP software. iConverter equipment is MEF 9, MEF 14, MEF 21, NEBS Level 3, UL and CE certified. Modules and chassis support a standard commercial temperature range of 0 to +50°C. Models are also available supporting a wide temperature range (-40 to +60°C) or an extended temperature range (-40 to +75°C). Visit www.omnitron-systems.com for detailed specifications, application examples, white papers and the latest information on new products. 4 • CE-VLAN to Provider VLAN (Q-in-Q) mapping to enable E-LINE and E-LAN service multiplexing • Quality of Service (QoS) Prioritization • Optical and Port statistics for performance monitoring • Granular Rate Limiting per port, per service and per CoS • Jumbo Frames up to 10,240 bytes Next-Generation Enterprise Networks iConverter media converters and multiplexers provide advanced fiber connectivity for Enterprise LAN and WAN networks. iConverter media converters support managed copper to fiber, multimode fiber to single-mode fiber, or dual fiber to single-fiber conversion applications. iConverter modules and chassis are used for point-to-point fiber connectivity, or to distribute high-density fiber links from the Network Core to standalone or compact, multi-module configurations at the Network Edge. To support Next-Generation networks, select iConverter media converters feature: • Pluggable transceivers for standard and CWDM wavelengths (available in SFP, SFP+ and XFP) • Quality of Service (QoS) Prioritization • VLAN Technology • Port VLAN and Port Access Controls • Auto Negotiation • Auto Crossover (MDI/MDI-X) • Bandwidth Control • Jumbo Frames up to 10,240 bytes 5 iConverter Network Management NetOutlook ® SNMP Management Software NetOutlook is an intuitive, SNMP-based Network Management Software application that provides detailed, real-time network status and control of iConverter equipment. Managing a chassis and its modules requires the installation of an iConverter Network Management Module (NMM2) or a media converter with integrated management in the chassis. NetOutlook supports IP-based and IP-less (Secure OAM or 802.3ah) management access of iConverter Network Interface Devices. Using NetOutlook, network managers can monitor and configure a wide variety of chassis, module and port-level functions, including the ability to override physical DIP-switch settings. Traps can be reported for specific events such as individual module and link status, temperature range violation, and power supply failure (including Dying Gasp). NetOutlook supports SNMPv1, SNMPv2c and SNMPv3. SNMPv3 provides secure access to network devices by a combination of authenticating and encrypting packets over the network. With NetOutlook, network managers can lower operational costs (OPEX) associated with truck rolls to edge equipment locations, reduce down time by quickly detecting and diagnosing network problems, and remotely configure network parameters to restore services. • SNMP-based GUI management software (SNMPv1/2c/3) • Supports IP-based and IP-less management access of iConverter NID modules • Remotely monitors and configures chassis, module and port functions and operational modes • Enables Ethernet services by provisioning Provider VLANs, Rate-Limiting, CoS Mapping and Traffic Filtering • Reports trap notifications of user-specified network events • Ethernet service fault monitoring and performance statistics reporting • Displays digital diagnostic information for pluggable transceivers • Loads and saves configurations to and from local files • Compatible with Windows 2000/XP/Vista Model 8100-0 6 Description NetOutlook SNMP Network Management Software iConverter NMM2 Network Management Module The iConverter NMM2 provides comprehensive remote monitoring, configuration and alarm notification functions for all iConverter managed media converters and Network Interface Devices (NIDs). Installed in any slot of an iConverter chassis, the NMM2 manages all other modules and power supplies installed in the chassis through a management backplane. Additionally, all remote NIDs linked to the managed iConverter chassis may be managed by the installed NMM2 through a secure IP-less OAM channel. Through the 10/100 RJ-45 Ethernet port, the NMM2 can be remotely accessed by IP-based management protocols, including SNMPv1/2c/3, TELNET and FTP. The serial console port can provide local access and configuration from a PC or modem. Management is accessed either via NetOutlook®, Omnitron’s SNMP-Based Network Management Software, or third party SNMP management software. An intuitive Command Line Interface (CLI) can be accessed either via the serial port or TELNET. The NMM2 provides comprehensive provisioning support for all local and remote iConverter modules, including port settings, VLANs and rate limiting. The NMM2 manages remote NIDs connected to the managed chassis via an IP-less OAM channel. Using a single IP address, an NMM2 installed in a 19-Module chassis can manage up to 18 local plug-in modules and 18 remote NIDs. • Provides management via SNMP, TELNET or FTP • Managed via Omnitron’s NetOutlook SNMP GUI, or thirdparty SNMP management software • In-band management via the chassis Ethernet backplane port or out-of-band via the front-panel RJ-45 Ethernet port • Built-in management VLAN support prioritizes and isolates management traffic from user traffic • Enables Remote OAM (Secure IP-less or 802.3ah) for iConverter NID modules • Firmware upgrades via serial port or FTP • Supports Dying Gasp and a variety of other traps Description 8000N-0 8081-3 Model Network Management Module (NMM2) NMM2 Serial Cable (DB-9, 3 ft.) 7 iConverter Chassis Options iConverter 1-Module Chassis and DIN Rail Brackets iConverter 19-Module Managed Chassis The 2U (3.5 inch) high iConverter 19-Module Managed Chassis can be mounted in a 19 or 23-inch rack, and features three redundant, load-sharing power supplies. The high-density chassis supports universal AC, 24VDC or 48VDC hot-swappable power supplies that can be used in any combination, and features an Ethernet backplane for connectivity between modules. Configuration 60W AC 120W AC 24VDC/66W 48VDC/66W 48VDC/120W 1 Power Supply 8200-1 8201-1 8206-1 8205-1 8207-1 2 Power Supplies 8200-2 8201-2 8206-2 8205-2 8207-2 3 Power Supplies 8200-3 8201-3 8206-3 8205-3 8207-3 Spare Power Supply 8200-9 8201-9 8206-9 8205-9 8207-9 23” Rack Mount Kit 8091-2 Blank Module Panel 8090-0 The 1 inch high 1-Module Chassis uses an external AC/DC power adapter, is tabletop or wall-mountable and supports a single iConverter module. DIN-Rail brackets for 1-Module chassis and standalone modules support four mounting orientations. Configuration US AC UNIV AC 48VDC 1-Module Chassis* 8240-1 8240-2 8242-9 1-Module Chassis with Dying Gasp Support 8241-1 8241-2 8243-9 Wall Mounting Hardware Kit 8249-0 DIN Rail Mounting Kit 8250-0 * See the 1-Module Chassis Data Sheet for additional power options and model numbers. iConverter 1-Module Redundant Power Chassis with PoE/PD iConverter 5-Module Managed Chassis The 1U (1.75 inch) high iConverter 5-Module Managed Chassis features an Ethernet backplane for connectivity between modules, and dual power supplies for load-sharing and power redundancy. Universal AC, 24VDC or 48VDC power supplies are hot-swappable and can be used in any combination. Configuration 33W AC 24VDC/33W 48VDC/33W 1 Power Supply 8220-1 8226-1 8225-1 2 Power Supplies 8220-2 8226-2 8225-2 Spare Power Supply 8220-9 8226-9 8225-9 23” Rack Mount Kit 8092-2 Blank Module Panel 8090-0 iConverter 2-Module Managed Chassis The iConverter 2-Module Chassis features a single internal universal AC or DC power supply and an Ethernet backplane. The 1-Module Redundant Power Chassis with PoE features redundant DC or DC/PoE power with load sharing. Two optional 10/100BASE-T UTP ports connect to the installed module via the Ethernet backplane, and support auto-negotiation, Full/Half-Duplex and auto-crossover. LEDs provide power status, UTP data rate and link activity. • Supports 9-28VDC (terminal or barrel) or 24-60VDC (terminal) • PoE power (PD type of device) via optional Ethernet port • Four optional contact closure alarm sensors Model Contact Closures UTP Ports Redundant Power 8245-111 - - (2) 9-28VDC Barrel (2) US 8245-112 - - (2) 9-28VDC Barrel (2) Universal 8247-220 X - (2) 9-28VDC Terminal - 8248-111 X X (2) 9-28VDC Barrel (2) US 8248-112 X X (2) 9-28VDC Barrel (2) Universal 8248-220 X X (2) 9-28VDC Terminal (1) Universal 8248-312 X X 9-28VDC Barrel + 24-60VDC Terminal 8248-320 X X 9-28VDC Terminal + 24-60VDC Terminal - X X PoE + 9-28VDC Barrel (1) Universal X X PoE + 9-28VDC Terminal - Configuration AC/6.5W AC/16.5W DC/6.6W DC/16.5W 8248-512 One (1) Power Supply 8230-0 8235-0 8235-0 8236-0 8248-520 1 Power Supply w/ Dying Gasp 8230-1 8235-1 8235-1 8236-1 Wall Mounting Hardware Kit 8 8249-0 AC Power Supply Modules not included with chassis. Consult data sheet or factory for additional configurations. Dying Gasp functionality requires installation of a management module that supports Dying Gasp. For Wide Temperature chassis (-40 to +60°C), add a “W” to the end of the part number. Contact Omnitron for extended temperature chassis (-40 to +75°C). 9 iConverter Network Interface Devices Service OAM Functions IEEE 802.1ag "Connectivity Fault Management" defines multilevel, continuous fault monitoring of Ethernet services for subscriber, service provider and network operator. Key features include: iConverter GM3 Network Interface Devices (NIDs) iConverter GM3 Ethernet NIDs ensure end-to-end carrier-class Ethernet services by supporting multi-service provisioning and operation, administration and maintenance (OAM) features, right at the customer premise. The GM3 meets today’s demand for high-capacity and scalable optical Ethernet service delivery, while providing the fault detection and performance monitoring OAM capabilities expected by the service provider. Meeting MEF, ITU and industry requirements for Ethernet User to Network Interface (UNI), the GM3 terminates metro optical Ethernet access over Fast or Gigabit Ethernet fiber networks (dual-fiber, single-fiber, CWDM). Service provisioning allows the provider to offer tiered revenue generation according to Service Level Agreements (SLA) based on data rate, Class of Service prioritization and service differentiation. Ethernet OAM provides the fault detection and performance monitoring necessary to ensure proper enforcement and compliance to SLAs. • Continuity Check – A periodic keep-alive message exchanged between end-points of an Ethernet service in a domain level. • Link Trace – An Administrator initiated command to trace intermediate points from one end-point to another end-point of an Ethernet service. • Loop Back – An Administrator initiated command for an end-point to request response from an intermediate-point or another end-point of an Ethernet service. ITU-T Y.1731 defines continuous performance monitoring to ensure compliance to SLAs established between the service provider and the subscriber. Key SLA parameters include: • Frame Delay – The amount of time it takes a frame to travel from end-point to end-point of an Ethernet service. • Frame Delay Variation (Jitter) – The statistical difference in the collection of Frame Delay readings between the end-points. • Frame Loss – The number of frames lost between the endpoints of an Ethernet service. • Availability - The percentage of the time the service is operational. • Functions as a multi-service NID or transport NID Port Connector Type Fiber Distance Wavelength (nm) ST SC - MM/DF 220/550m 850 8920P-0 8922P-0 UTP - SM/DF 12km 1310 8921P-1 8923P-1 UTP - SM/DF 34km 1310 - 8923P-2 • Remote management through TELNET, SNMPv1/2c/3 and IP-less 802.3ah OAM extensions FF UTP - SM/DF 80km 1550 - 8923P-3 FF UTP - SM/DF 110km 1550 - 8923P-4 • IEEE 802.1ad Provider VLAN and Q-in-Q tag stacking for E-Line and E-LAN service multiplexing FF UTP - SM/DF 140km 1550 - 8923P-5 FF UTP - SM/SF 20km 1310/1550 - 8930P-1 FF UTP - SM/SF 20km 1550/1310 - 8931P-1 FF UTP - SM/SF 40km 1310/1550 - 8930P-2 FF UTP - SM/SF 40km 1550/1310 - 8931P-2 SFP UTP - • Available as a chassis plug-in module or standalone unit P1 P2 P3 • Supports IEEE 802.1ag and ITU-T Y.1731 Service OAM for end-to-end fault detection and performance monitoring FF UTP FF • Supports IEEE 802.3ah Link OAM FF • Granular Rate Limiting using Committed Information Rate (CIR) and Committed Burst Size (CBS) • Quality of Service (QoS) Prioritization • Class of Service (CoS) Traffic Classification • Small Form Pluggable (SFP) transceivers for standard or CWDM applications • Supports Gigabit and Fast Ethernet fiber access networks • Customer network service port available in copper RJ-45 or SFP Fiber interfaces • Supports uplink redundancy with Rapid Spanning Tree protocol • 10,240 byte Jumbo frames • Commercial, wide and extended temperature ranges • MEF 9, MEF 14 and MEF 21 Certified Compliant 10 8939P-0** SFP SFP UTP UTP UTP SFP 8975P-0** 8970P-0** UTP UTP - 8989P-0 SFP SFP - 8999P-0** UTP = Unshielded Twisted Pair, FF = Fixed Fiber, SPF = Small Form Pluggable ** Order Fiber or Copper SFPs separately. See SFP ordering information on pages 50 and 51. To order a standalone model, add a suffix to the model number as follows: - A: Tabletop with US AC to DC Power Supply Adapter (supports DIN-rail Bracket) - B: Tabletop with Universal AC to DC Power Supply Adapter (supports DIN-rail Bracket) - C: Tabletop with DC Power Terminal Connector (supports DIN-rail Bracket) - D: Wall-mount with US AC to DC Power Supply Adapter - E: Wall-mount with Universal AC to DC Power Supply Adapter - F: Wall-mount with DC Power Terminal Connector For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. 11 iConverter Network Interface Devices iConverter M2 Network Interface Devices iConverter M2 Class Network Interface Devices (NIDs) are intelligent media converters with integrated IP-based and IP-less (Secure OAM or 802.3ah) management that support advanced networking capabilities. The M2 NIDs provide MEF 9 and 14 certified Ethernet service demarcation in telecom networks, and mission critical managed fiber links in Next-Generation enterprise networks. The carriergrade M2 NIDs support 802.3ah Link OAM performance monitoring and fault detection. They are available as plugin modules, or as standalone wall-mounted or tabletop units with optional DIN-rail mount. The iConverter standalone NID provides a managed demarcation point, and the plug-in module can manage a chassis of modules or be managed as a regular converter by another management module. • Remote management through TELNET, SNMPv1/2c/3 and IP-less 802.3ah OAM extensions • 802.3ah Link OAM Fault Detection and Performance Monitoring • 802.1Q Tag VLAN with Q-in-Q and 802.1ad Provider VLAN for terminating Ethernet Virtual Circuits • Secure IP-less and 802.3ah OAM Management Channels • 802.1p Quality of Service (QoS) prioritization • Port Rate Limiting, Port Access Control and MIB statistics Copper to Fiber Ethernet NIDs 10/100M2 10/100BASE-TX to 100Base-FX NIDs GX/TM2 10/100/1000BASE-T to 1000BASE-X NIDs The 10/100Mbps 10/100M2 and the 10/100/1000Mbps GX/TM2 are copper to fiber Ethernet demarcation NIDs. Fiber Distance Wavelength (nm) Connector Type ST SC MT-RJ LC iConverter 10/100M2 MM 5km 1310 8900N-0 8902N-0 8904N-0 8906N-0 SM 30km 1310 8901N-1 8903N-1 8905N-1 8907N-1 SM 60km 1310 8901N-2 8903N-2 - 8907N-2 SM 120km 1550 - 8903N-3 - 8907N-3 SM-SF 20km 1310/1550 - 8910N-1* - - SM-SF 20km 1550/1310 - 8911N-1* - - SM-SF 40km 1310/1550 - 8910N-2* - - • Advanced Link Fault Detection and Propagation modes SM-SF 40km 1550/1310 - 8911N-2* - - • Fixed fiber connectors for dual or single-fiber SFP** • Small Form Pluggable (SFP) fiber transceivers for standard and CWDM wavelengths 8919N-0 iConverter GX/TM2 MM 220m/500m 850 8920N-0 8922N-0 8924-0 8926-0 • 2,048 byte (Fast Ethernet modules) and 10,240 byte (Gigabit modules) Jumbo Frames SM 12km 1310 8921N-1 8923N-1 8925-1 8927N-1 SM 34km 1310 - 8923N-2 - 8927N-2 • Granular 64Kbps Rate Limiting SM 80km 1550 - 8923N-3 - 8927N-3 • L2CP Policy Control SM 110km 1550 - 8923N-4 - 8927N-4 SM 140km 1550 - 8923N-5 - 8927N-5 SM-SF 20km 1310/1550 - 8930N-1* - - SM-SF 20km 1550/1310 - 8931N-1* - - SM-SF 40km 1310/1550 - 8930N-2* - - SM-SF 40km 1550/1310 - 8931N-2* - - SFP * Single-fiber converters must be used in pairs. ** Order SFPs separately. See SFP ordering information on pages 50 and 51. Fiber to Fiber Ethernet NIDs 2FXM2 100BASE-FX to 100BASE-FX NIDs 2GXM2 1000BASE-X to 1000BASE-X NIDs The 100Mbps 2FXM2 and the Gigabit 2GXM2 are fiber to fiber Ethenet demarcation NIDs. Description 12 8939N-0** Model 2FXM2 100Mbps Fiber to Fiber NID 8959N-0 2GXM2 Gigabit Fiber to Fiber NID 8999N-0 To order a standalone model, add a suffix to the model number as follows: - A: Tabletop with US AC to DC Power Supply Adapter (supports DIN-rail Bracket) - B: Tabletop with Universal AC to DC Power Supply Adapter (supports DIN-rail Bracket) - C: Tabletop with DC Power Terminal Connector (supports DIN-rail Bracket) - D: Wall-mount with US AC to DC Power Supply Adapter - E: Wall-mount with Universal AC to DC Power Supply Adapter - F: Wall-mount with DC Power Terminal Connector For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. 13 iConverter Managed Media Converters iConverter XG iConverter GX/T 10 Gigabit Converter/Transponder Modules 10/100/1000 Ethernet UTP to Fiber Converter Modules The iConverter XG is a 10 Gigabit, protocol-transparent media converter with two pluggable transceiver ports. The iConverter XG is available as a compact, unmanaged standalone unit, or as a managed plug-in module. The XG can be used as a copper-tofiber converter, a fiber mode converter, a SFP+ to XFP adapter, a WDM transponder or a fiber repeater supporting the three Rs (regeneration, retiming and reshaping). Built-in loopback functions, on-board status LEDs and link fault propagation modes facilitate easy setup and quick troubleshooting. • Supports 100% traffic throughput with no packet size limits • Protocol transparent from 9.95Gbps to 11.32Gbps • Supports XFP and SFP+ transceivers • Compatible with SFP+ copper direct attach cable (Twinax) • Supports fiber transceiver digital diagnostics reporting and alarm notification • 10GBASE-CX4 XFPs enable 10G copper to fiber conversion Port 1 Port 2 Model # SFP+ SFP+ 8599-00 SFP+ XFP 8599-01 XFP XFP 8599-11 ** Order SFP+ and XFP transceivers separately. See ordering information on page 50. To specify standalone module type and power options, add a suffix to the model number: - A: Tabletop with US AC to DC Power Supply Adapter (supports DIN-rail Bracket) - B: Tabletop with Universal AC to DC Power Supply Adapter (supports DIN-rail Bracket) - C: Tabletop with DC Power Terminal Connector (supports DIN-rail Bracket) - D: Wall-mount with US AC to DC Power Supply Adapter - E: Wall-mount with Universal AC to DC Power Supply Adapter - F: Wall-mount with DC Power Terminal Connector For wide temperature (-40 to 60°C), add a “W” to the end of the model number. For extended temperature (-40 to +75°C), add a "Z" to the end of the model number. 14 The iConverter GX/T provides 10/100/1000BASE-T UTP copper to 1000BASE-X Gigabit fiber conversion, and supports advanced networking features and link fault detection modes. • Supports the IEEE 802.1Q VLAN and the IEEE 802.1p QoS prioritization standards • Port Access Control and reporting of MIB Statistics • Multimode (MM), single-mode (SM) and single-fiber (SF) • ST, SC, MT-RJ or LC fiber connectors • User-selectable or auto-negotiation for Pause and Full/Half-Duplex • Advanced Fault Detection modes for quick fault detection, isolation and reporting • Ethernet backplane ports for expansion to adjacent modules Connector Type Fiber Distance Wavelength (nm) ST SC MT-RJ LC MM 220m/550m 850 8520-0 8522-0 8524-0 8526-0 SM 12km 1310 8521-1 8523-1 8525-1 8527-1 SM 34km 1310 - 8523-2 - 8527-2 SM 80km 1550 - 8523-3 - 8527-3 SM 110km 1550 - 8523-4 - 8527-4 SM 140km 1550 - 8523-5 - 8527-5 SM-SF 20km 1310/1550 - 8530-1* - - SM-SF 20km 1550/1310 - 8531-1* - - SM-SF 40km 1310/1550 - 8530-2* - - SM-SF 40km 1550/1310 - 8531-2* - - * Single-fiber converters must be used in pairs. For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. 15 iConverter Managed Media Converters iConverter Gx AN iConverter GX/X and GX/F Gigabit Ethernet UTP to Fiber Converter Modules Gigabit Switch/Fiber Converters and Gigabit to Fast Ethernet Switch/Fiber Converters The iConverter Gx AN provides 1000BASE-T UTP copper to 1000BASE-X Gigabit fiber conversion, and is available as a unmanaged standalone unit, or as a managed chassis plug-in module. The Gx AN supports auto-negotiation on both ports, and a variety of link fault detection modes for easy fault detection and isolation. • Multimode (MM), single-mode (SM) and single-fiber (SF) The iConverter GX/X is a Gigabit to Gigabit Ethernet fiber to fiber converter, and the iConverter GX/F is a Gigabit to Fast Ethernet bridging fiber to fiber converter. They provide single mode to multimode and dual fiber to single-fiber conversion, and perform regeneration, retiming and reshaping of the fiber optic signal. • ST, SC, MT-RJ and LC fiber connectors • Supports IEEE 802.1Q VLAN and the 802.1p QoS standards • SFP transceivers for standard and CWDM wavelengths • Ethernet backplane ports for expansion to adjacent modules • User-selectable UTP port auto-negotiation for Pause and Full/Half-Duplex Fiber Distance Port 1/Port 2 Port 1/Port 2 • Fiber port manual or auto-negotiation • Advanced Fault Detection modes for quick fault detection, isolation and reporting Connector Type Wavelength (nm) Port 1/Port 2 Connector Type SC MT-RJ LC - iConverter GX/X MM/MM 550m/550m 850/850 8542-00 8544-00 SM/MM 12km/550m 1310/850 8543-10 - - SM/SM 12km/12km 1310/1310 8543-11 8545-11 8547-11 Fiber Distance Wavelength (nm) ST SC MT-RJ LC SM/SM 34km/34km 1310/1310 8543-22 - 8547-22 MM 220m/550m 850 8500N-0 8502N-0 8504N-0 8506N-0 SM/SM 80km/80km 1550/1550 8543-33 - 8547-33 SM 12km 1310 8501N-1 8503N-1 8505N-1 8507N-1 2 X SM-SF 20km/20km 13,15/13,15 8554-11* - - SM 34km 1310 8503N-2 - 8507N-2 2 X SM-SF 20km/20km 15,13/15,13 8557-11* - - SM 80km 1550 8503N-3 - 8507N-3 SM 110km 1550 8503N-4 - 8507N-4 MM/MM 550m/5km 850/1310 8562-00 8564-00 - SM 140km 1550 8503N-5 - 8507N-5 MM/SM 550m/30km 850/1310 8562-01 8564-01 - SM-SF 20km 1310/1550 8510N-1* - - MM/SM 550m/60km 850/1310 8562-02 - - SM-SF 20km 1550/1310 8511N-1* - - MM/SM 550m/120km 850/1550 8562-03 - - SM-SF 40km 1310/1550 8510N-2* - - SM/MM 12km/5km 1310/1310 8563-10 8565-10 - SM-SF 40km 1550/1310 8511N-2* - - SM/SM 12km/30km 1310/1310 8563-11 8565-11 8567-11 SM/SM 12km/60km 1310/1310 8563-12 - 8567-12 SM/SM 12km/120km 1310/1550 8563-13 - 8567-13 *Single-fiber converters must be used in pairs. ** Order SFP separately. See SFP ordering information on pages 50 and 51. MM/SM-SF 550m/20km 850/13,15 8562-05* - - MM/SM-SF 550m/20km 850/15,13 8562-07* - - To order a standalone Gx AN model, add a suffix to the model number as follows: - A: Tabletop with US AC to DC Power Supply Adapter (supports DIN-rail Bracket) - B: Tabletop with Universal AC to DC Power Supply Adapter (supports DIN-rail Bracket) - C: Tabletop with DC Power Terminal Connector (supports DIN-rail Bracket) - D: Wall-mount with US AC to DC Power Supply Adapter - E: Wall-mount with Universal AC to DC Power Supply Adapter - F: Wall-mount with DC Power Terminal Connector For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Example 8502N-0-AW = MM, 220m/550m, 850nm, SC, Tabletop with US AC Power Supply, wide temperature. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. MM/SM-SF 550m/40km 850/13,15 8562-06* - - MM/SM-SF 550m/40km 850/15,13 8562-08* - - SM/SM-SF 12km/20km 1310/13,15 8563-15* - - SM/SM-SF 12km/20km 1310/15,13 8563-17* - - SM/SM-SF 12km/40km 1310/13,15 8563-16* - - SM/SM-SF 12km/40km 1310/15,13 8563-18* - - SFP 16 8519N-0** iConverter GX/F * Single-fiber converters must be used in pairs. For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. 17 iConverter Managed Media Converters iConverter 100FF and 1000FF iConverter 2Fx Fast and Gigabit Ethernet Fiber to Fiber Converter Modules Two-Port Fast Ethernet Fiber Converter/Repeater Modules The iConverter 100FF and 1000FF multimode to single-mode fiber converter modules extend network distances and connect dissimilar fiber network cabling. Modules are available to support Fast Ethernet and Gigabit Ethernet. • Converts multimode (MM) to single-mode (SM) dual fiber and dual fiber to single-fiber (SF) • Advanced Fault Detection modes for quick fault detection, isolation and reporting Fiber Port 1/Port 2 Distance Port 1/Port 2 Wavelength (nm) Port 1/Port 2 The iConverter 2Fx is a two-port, 100BASE-FX to 100BASE-FX managed optical switch module that operates as a fiber to fiber repeater and converter. It performs regeneration, retiming and reshaping of the Ethernet signals. The 2Fx features two Ethernet backplane ports for connectivity to adjacent modules, enabling scalable, multi-module configurations such as redundant rings or fiber distribution switches. • Supports IEEE 802.1Q VLAN with Q-in-Q and IEEE 802.1p QoS prioritization standards Connector Type • Individual Port Bandwidth and Port Access Controls ST SC • Reporting of MIB Statistics iConverter 100FF • Multimode (MM), single-mode (SM) and single-fiber (SF) MM/SM 5km/30km 1310/1310 8620-1 8622-1 MM/SM 5km/60km 1310/1310 8620-2 8622-2 MM/SM 5km/120km 1310/1550 - 8622-3 MM/SM-SF* 5km/20km 1310/1310-1550 8630-1** 8634-1** MM/SM-SF* 5km/20km 1310/1550-1310 8631-1** 8635-1** MM/SM-SF* 5km/40km 1310/1310-1550 8630-2** 8634-2** MM/SM-SF* 5km/40km 1310/1550-1310 8631-2** 8635-2** SM/SM-SF* 30km/20km 1310/1310-1550 8632-1** 8636-1** SM/SM-SF* 30km/20km 1310/1550-1310 8633-1** 8637-1** SM/SM-SF* 30km/40km 1310/1310-1550 8632-2** 8636-2** SM/SM-SF* 30km/40km 1310/1550-1310 8633-2** 8637-2** iConverter 1000FF MM/SM 550m/12km 850/1310 - 8642-1 MM/SM 550m/34km 850/1310 - 8642-2 MM/SM 550m/80km 850/1550 - 8642-3 SM/SM 12km/34km 1310/1310 - 8643-2 SM/SM 12km/80km 1310/1550 - 8643-3 MM/SM-SF 550m/20km 850/1310-1550 - 8650-1** MM/SM-SF 550m/20km 850/1550-1310 - 8651-1** SM/SM-SF 12km/20km 1310/1310-1550 - 8652-1** SM/SM-SF 12km/20km 1310/1550-1310 - 8653-1** SM/SM-SF 12km/40km 1310/1310-1550 - 8652-2** SM/SM-SF 12km/40km 1310/1550-1310 - 8653-2** • ST, SC, MT-RJ and LC fiber connectors • Advanced Fault Detection modes for quick fault detection, isolation and reporting • Ethernet backplane ports for connectivity to adjacent modules Fiber Distance Port 1/Port 2 Port 1/Port 2 Wavelength (nm) Port 1/Port 2 ST SC Connector Type MT-RJ LC MM/MM 5km 1310/1310 8440-0 8442-0 8444-0 8446-0 SM/SM 30km 1310/1310 8441-1 8443-1 8445-1 8447-1 SM/SM 60km 1310/1310 8441-2 8443-2 - 8447-2 SM/SM 120km 1550/1550 - 8443-3 - 8447-3 2 X SM-SF 20km 13-15/13-15 - 8450-1* - - 2 X SM-SF 20km 15-13/15-13 - 8451-1* - - 2 X SM-SF 40km 13-15/13-15 - 8450-2* - - 2 X SM-SF 40km 15-13/15-13 - 8451-2* - - * Single-fiber converters must be used in pairs. For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. * All single-fiber ports are SC connectors. ** Single-fiber converters must be used in pairs. Refer to OC3FF and OC12FF on page 34 for Standalone module ordering information. For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. 18 19 iConverter Managed Media Converters iConverter 10/100 and 10/100VT iConverter 100Fx/Tx, 10FL/T and 10T/2 10/100 Ethernet UTP to Fiber Converter Modules 100Mbps and 10Mbps Ethernet Converter Modules The iConverter 10/100 and 10/100VT convert 10/100Mbps UTP copper to 100BASE-FX fiber. • Multimode (MM), single-mode (SM) and single-fiber (SF) • Advanced Fault Detection modes for quick fault detection, isolation and reporting • Ethernet backplane ports for expansion to adjacent modules The iConverter 10/100VT supports these additional features: • UTP Auto-crossover • IEEE 802.1Q VLAN with Q-in-Q and the IEEE 802.1p QoS prioritization standards • Individual Port Bandwidth and Port Access Controls • Reporting of MIB Statistics Distance Wavelength (nm) The 10T/2 is a 10BASE-T UTP to 10BASE-2 coax media converter that supports 50 ohm coax to a distance of 185m, and up to 30 workstations. It features Ethernet backplane ports for expansion to adjacent modules. Connector Type ST SC MT-RJ Distance Wavelength (nm) Connector Type ST SC MT-RJ LC iConverter 100Fx/Tx LC iConverter 10/100 MM 5km 1310 8380-0 8382-0 8384-0 8386-0 SM 30km 1310 8381-1 8383-1 8385-1 8387-1 SM 60km 1310 8381-2 8383-2 - 8387-2 SM 120km 1550 - 8383-3 - 8387-3 SM-SF 20km 1310/1550 - 8390-1* - - SM-SF 20km 1550/1310 - 8391-1* - - SM-SF 40km 1310/1550 - 8390-2* - - SM-SF 40km 1550/1310 - 8391-2* - - SM-SF 60km 1310/1550 - 8390-3* - - SM-SF 60km 1550/1310 - 8391-3* - - iConverter 10/100VT MM 5km 1310 8800-0 8802-0 8804-0 8806-0 SM 30km 1310 8801-1 8803-1 8805-1 8807-1 SM 60km 1310 8801-2 8803-2 - 8807-2 SM 120km 1550 - 8803-3 - 8807-3 SM-SF 20km 1310/1550 - 8810-1* - - SM-SF 20km 1550/1310 - 8811-1* - - SM-SF 40km 1310/1550 - 8810-2* - - SM-SF 40km 1550/1310 - 8811-2* - - *Single-Fiber converters must be used in pairs. For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. 20 The 10FL/T is a 10BASE-FL fiber to 10BASE-T UTP media converter that supports Full/Half-Duplex and auto-crossover. It features Remote Fault Detection, Link Segmentation and Link Propagation modes. Fiber • Symmetrical Fault Detection mode Fiber The iConverter 100Fx/Tx provides 100BASE-TX UTP copper to 100BASE-FX fiber conversion with auto-negotiation for Full/HalfDuplex. It supports Link Segmentation, Link Propagation and Remote Fault Detection modes, and features a crossover switch. MM 5km 1310 8360-0 8362-0 8364-0 8366-0 SM 30km 1310 8361-1 8363-1 8365-1 8367-1 SM 60km 1310 8361-2 8363-2 - 8367-2 SM 120km 1550 - 8363-3 - 8367-3 SM-SF 20km 1310/1550 - 8370-1* - - SM-SF 20km 1550/1310 - 8371-1* - - SM-SF 40km 1310/1550 - 8370-2* - - SM-SF 40km 1550/1310 - 8371-2* - - SM-SF 60km 1310/1550 - 8370-3* - - SM-SF 60km 1550/1310 - 8371-3* - - iConverter 10FL/T MM 2km 850 8300-0 8302-0 - MM 5km 1310 8300-1 - 8304-1 - SM 30km 1310 8301-1 8303-1 8305-1 8307-1 SM 60km 1310 8301-2 8303-2 - 8307-2 SM 120km 1550 - 8303-3 - 8307-3 SM-SF 20km 1310/1550 - 8310-1* - - SM-SF 20km 1550/1310 - 8311-1* - - SM-SF 40km 1310/1550 - 8310-2* - - SM-SF 40km 1550/1310 - 8311-2* - - iConverter 10T/2 8340-0 100m UTP 185m Coax *Single-Fiber converters must be used in pairs. For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. 21 iConverter Switch Modules and Media Converters iConverter 4Tx and 4TxVT iConverter Tx/2Fx and Tx/2Tx 4-Port 10/100 Ethernet Switch Modules Fast Ethernet UTP to Redundant Fiber and Fast Ethernet UTP to Redundant UTP Converter Modules The iConverter 4Tx and 4TxVT are compact, managed 4-port 10/100 Ethernet switches with backplane ports for expansion to adjacent modules in the chassis. They provide plug-and-play capability with auto-negotiation and auto-crossover features that eliminate the need for manual port configuration and crossover cables. When used in a 2 or 5-Module Chassis with an iConverter NID module, the 4Tx or 4TxVT provide a remotely managed, multi-port demarcation switch. They can also be used as unmanaged standalone switches in a 1-Module iConverter chassis. The iConverter 4Tx features Port VLAN, Port Access Control and reporting of MIB Statistics. The iConverter 4TxVT extends the capabilities of the 4Tx with per-port based Bandwidth Control and support of the IEEE 802.1Q VLAN (including Q-in-Q multi-stacking) and the IEEE 802.1p QoS standards. The iConverter Fast Ethernet redundant link modules convert a single copper cable to redundant copper or redundant fiber links, and are designed for resilient networks that require link redundancy. • 100 microseconds hot fail-over backup • User-selectable or auto-negotiation for Full/Half-Duplex • Link Segmentation, Link Propagation and Remote Fault Detection modes • Crossover switch for easy installation Fiber/UTP Distance Wavelength (nm) Connector Type ST SC MT-RJ LC RJ-45 iConverter Tx/2Fx MM 5km 1310 8420-0 8422-0 8424-0 8426-0 - • 10/100BASE-TX 4-Port UTP switch module with 1,536 bytes maximum frame size SM 30km 1310 8421-1 8423-1 8425-1 8427-1 - SM 60km 1310 8421-2 8423-2 - 8427-2 - • Supports Port VLAN, Port Access Control and reporting of MIB Statistics SM 120km 1550 - 8423-3 - 8427-3 - SM-SF 20km 1310/1550 - 8430-1* - - - • RJ-45 auto-crossover eliminates need for a crossover cable SM-SF 20km 1550/1310 - 8431-1* - - - SM-SF 40km 1310/1550 - 8430-2* - - - SM-SF 40km 1550/1310 - 8431-2* - - - SM-SF 60km 1310/1550 - 8430-3* - - - SM-SF 60km 1550/1310 - 8431-3* - - - - - 8400-0 • Ethernet backplane ports for expansion to adjacent modules • 4TxVT also supports Tag VLAN with Q-in-Q, QoS and perport based Bandwidth Control Module Ports Distance Model Number iConverter 4Tx 4 UTP 100m 8480-4 iConverter 4TxVT 4 UTP 100m 8481-4 For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for extended temperature (-40 to +75°C) models. 22 iConverter Tx/2Tx UTP 100m N/A - - *Single-Fiber converters must be used in pairs. For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. 23 iConverter Ethernet Module Comparison Chart Data Rates 1 2 Up to 4 Gbps 2 1 7 10,240 * 10 10,240 * 13 10,240 * 12 2,048 * 13 2,048 * 12 ** UNL 14 UNL 1 8500N-8519N 1 GX/X 8540-8559 2 1,536 17 GX/F 8560-8569 2 1,536 17 2 1,536 1 35 1 1,536 UNL 1000FF 8640-8659 10/100VT 8800-8819 1 1 10/100 8380-8399 1 1 100Fx/Tx 8360-8379 1 1 2Fx 8440-8459 2 100FF 8620-8639 2 10FL/T 8300-8319 10T/2 8340 4Tx 8480 4TxVT 8481 Tx/2Fx 8420-8439 Tx/2Tx 8400 18 15 16 UNL 20 1,522 20 UNL 21 1,536 19 UNL 18 1 UNL 21 2 6,250 4 4 1 Legend UNL Unlimited frame packet size * Enhanced Rate Limiting in 64k increments ** Supports Copper pluggable transceivers 24 ASY ** SFD 2 LP & RFD 1 MIB Statistics ** Catalog Page Number Rate Limiting Gx AN 1 Maximum Packet Size 8520-8529 QoS/Prioritization GX/T Provider VLAN (Q-in-Q) 8699 Tag VLAN xFF Port VLAN 8599 Link Modes (Fault Propagation) Port Features Port Access Control 8959N XG IEEE 802.1ag/ITU-T Y.1731 2FXM2 IEEE 802.3ah 10/100M2 8900N-8919N See Ordering Table on Page 11 Secure IP-Less OAM 8999N Backplane 2GXM2 IP-Based (TELNET/SNMP) with Management VLAN 8920N-8939N # Copper GX/TM2 SFP/SFP+/XFP 8920P-8999P # Fiber GM3 Ethernet OAM 1 10 Gbps 8000N 1000 Mbps NMM2 100 Mbps Model Number 10 Mbps Module Name Management Access Ports 2 21 1,536 1,536 22 22 1 UNL 23 3 UNL 23 Link Modes: LP Link Propagation RFD Remote Fault Detection SFD Symmetrical Fault Detection ASY Asymmetrical Link Propagation 25 iConverter Managed Media Converters iConverter T1/E1 iConverter T3/E3 T1/E1 Copper to Fiber Media Converter Modules T3/E3 Media Converter Modules • Converts UTP or coax T1 or E1 to fiber • T3 or E3 copper to fiber converter • ST, SC, MT-RJ and LC fiber connectors • ST, SC, MT-RJ and LC fiber connectors • SFP transceivers for standard and CWDM wavelengths • SFP transceivers for standard and CWDM wavelengths • Multimode (MM), single-mode (SM) and single-fiber (SF) • Multimode (MM), single-mode (SM) and single-fiber (SF) • Supports ANSI, AT&T, ITU and ETSI standards • Distances up to 120km • Supports AMI, B8ZS and HDB3 line codes • Supports ANSI, ETSI and ITU specifications • User-selectable Local Loopback and a variety of test modes • Supports B3ZS for T3 (DS3) and HDB3 for E3 codes • Crossover switch on RJ-45/RJ-48 port for easy configuration • Individual coax and fiber port enable/disable The iConverter T1/E1 converts UTP or coax copper to multimode or single-mode fiber to extend T1 or E1 to distances up to 120km. A variety of test modes facilitate easy installation and testing of the fiber link without the need for external test equipment. Fiber Distance Wavelength (nm) • Local and remote loopback for easy installation Connector Type ST SC MT-RJ LC iConverter T1/E1 Copper RJ-45/RJ-48 to Fiber SFP 8719-0** MM 5km 1310 8700-0 8702-0 8704-0 8706-0 SM 30km 1310 8701-1 8703-1 8705-1 8707-1 SM 60km 1310 8701-2 8703-2 - 8707-2 SM 120km 1550 - 8703-3 - 8707-3 SM-SF 20km 1310/1550 - 8710-1* - - SM-SF 20km 1550/1310 - 8711-1* - - SM-SF 40km 1310/1550 - 8710-2* - - SM-SF 40km 1550/1310 - 8711-2* - - iConverter T1/E1 Copper Coax + RJ-45/RJ-48 to Fiber* SFP The iConverter T3/E3 converts T3/DS3 or E3 coax to fiber. The T3/E3 operates with framed or unframed data, and can operate with channelized or unchannelized data streams. The T3/E3 operates in pairs extending distances up to 120km. Fiber Distance Connector Type Wavelength (nm) SFP ST SC MT-RJ LC 8759-0** MM 5km 1310 8740-0 8742-0 8744-0 8746-0 SM 30km 1310 8741-1 8743-1 8745-1 8747-1 SM 60km 1310 8741-2 8743-2 - 8747-2 SM 120km 1550 - 8743-3 - 8747-3 SM-SF 20km 1310/1550 - 8750-1* - - SM-SF 20km 1550/1310 - 8751-1* - - SM-SF 40km 1310/1550 - 8750-2* - - SM-SF 40km 1550/1310 - 8751-2* - - * Single-Fiber converters must be used in pairs. 8739-0** MM 5km 1310 8720-0 8722-0 8724-0 8726-0 SM 30km 1310 8721-1 8723-1 8725-1 8727-1 SM 60km 1310 8721-2 8723-2 - 8727-2 SM 120km 1550 - 8723-3 - 8727-3 SM-SF 20km 1310/1550 - 8730-1* - - SM-SF 20km 1550/1310 - 8731-1* - - SM-SF 40km 1310/1550 - 8730-2* - - SM-SF 40km 1550/1310 - 8731-2* - - *The T1/E1 Copper Coax + RJ-45/RJ-48 to Fiber converter is only available as a 2-slot chassis plug-in module, and not compatible with 5-Module or 1-Module chassis. ** Order SFP separately. See SFP ordering information on pages 50 and 51. To order an unmanaged standalone module, add a suffix the model number as follows: D = Wall-Mount with External US AC Power Supply E = Wall-Mount with External Universal AC Power Supply F = Wall-Mount with DC Terminal Power For wide temperature (-40 to 60°C), add a “W” to the end of the model number. For extended temperature (-40 to +75°C), add a “Z” to the end of the model number. Example: 8740-0-DW = T3/E3, MM, 5km, 1310, Wall-Mount External US AC Power Supply, wide temperature For other configurations, please contact Omnitron. ** Order SFPs separately. See SFP ordering information on pages 50 and 51. See additional ordering information on page 27. 26 27 iConverter T1/E1 Multiplexers iConverter 4xT1/E1 MUX and TM3 Transport iConverter T1/E1 MUX/M Modular T1/E1 Multiplexer Solution 16-Port T1/E1 Fixed-Configuration Multiplexers iConverter T1/E1 multiplexer and transport modules combine to provide a flexible and scalable T1/E1 fiber multiplexer. This modular solution is comprised of the iConverter TM3 fiber transport module and the iConverter 4xT1/E1 4-port multiplexer module installed in a 2, 5 or 19-module chassis. Each TM3 can support up to four 4xT1/E1 MUX modules, for multiplexing up to sixteen T1/E1 circuits per fiber transport link. Ethernet traffic can also be multiplexed with the T1/E1 traffic through a 10/100/1000 UTP port. The modular T1/E1 multiplexers operate in a back-to-back configuration, with one TM3 transport module at each end of the fiber link. Monitoring, configuration and remote testing is accessed through the TM3 serial console port, IP-based SNMP or IP-less OAM channels. The iConverter T1/E1 MUX multiplexes up to sixteen T1s or E1s and one 10/100/1000 Ethernet onto a fiber optic transport link. The T1/E1 MUXes operate in a back-to-back configuration, with one multiplexer at each end of the fiber transport link. The T1/E1 copper interfaces are available in 4, 8, 12 or 16 RJ-48 port configurations. • Small Form Pluggable (SFP) transceivers or fixed fiber connectors • Supports multimode, single-mode dual fiber and single-mode single-fiber in standard and CWDM wavelengths • Manageable via SNMP, TELNET or serial port • Configurable alarm relay contacts for audio/visual fault notification • Supports local and remote loop-back modes • 24 hour T1/E1 statistic logging Connector Type • Supports remotely-initiated T1 loop-up commands Fiber Distance • Manageable via SNMP, TELNET or serial port Wavelength (nm) ST SC SFP SFP - - - - 2439-0** MM-DF 220/550m 850 2420-0 2422-0 - MM-DF 12km 1310 2421-1 2423-1 - SM-DF 34km 1310 - 2423-2 - SM-DF 80km 1550 - 2423-3 - 1550 - 2423-4 - • Optional external clock I/O port iConverter TM3 Transport Module Fiber Distance Wavelength (nm) Connector Type ST SC SFP SM-DF 110km SFP - - - - 2439-0-T** SM-DF 140km 1550 - 2423-5 - MM-DF 220/550m 850 2420-0-T 2422-0-T - SM-SF 20km 1550/1310 - 2430-1* - MM-DF 12km 1310 2421-1-T 2423-1-T - SM-SF 20km 1310/1550 2431-1* - SM-DF 34km 1310 2421-2-T 2423-2-T - SM-SF 40km 1310/1550 - 2430-2* - SM-DF 80km 1550 - 2423-3-T - SM-SF 40km 1550/1310 - 2431-2* - SM-DF 110km 1550 - 2423-4-T* - SM-DF 140km 1550 - 2423-5-T* - SM-SF 20km 1550/1310 - 2430-1-T* - SM-SF 20km 1310/1550 2431-1-T* - SM-SF 40km 1310/1550 - 2430-2-T* - SM-SF 40km 1550/1310 - 2431-2-T* - * Single-Fiber modules must be ordered in pairs. ** Order SFP separately. See SFP ordering information on pages 50 and 51. To order a wide temperature (-40 to 60°C) TM3 module, add a “W” to the end of the model number. iConverter 4xT1/E1 MUX Module Number of Ports 4 T1/E1 4 T1/E1 with Clock I/O Model Number 8485-4 8486-4 To order a wide temperature (-40 to 60°C) 4xT1/E1 module, add a “W” to the end of the model number. 28 9140-3 Adapter Cable RJ-48 to BNC 3 ft To order the number of T1/E1 ports in the chassis, add a number from the list below to the part number as shown: 24xx-x-Yz To order AC or DC power supplies, add a number from the list below to the end of the part number as shown: 24xx-x-yZ 1 - 4 ports total 2 - 8 ports total 3 - 12 ports total 4 - 16 ports total 1 - One AC Power Supply 2 - Two AC Power Supplies 3 - One 48VDC Power Supply 4 - Two 48VDC Power Supplies 5 - One 24VDC Power Supply 6 - Two 24VDC Power Supplies For wide temperature (-40 to 60°C), add a “W” to the end of the model number - 24xx-x-yzW Example: 2421-0-46W = MM-DF, 12km, 850nm, Four 4-Port MUX Modules (16 ports total), Two 24VDC Power Supplies, wide temperature. * Single-Fiber MUXes Tx and Rx are reversed at each end. For example the 2430-1 must be ordered with the 2431-1 ** Order SFP separately. See SFP ordering information on pages 50 and 51. 29 iConverter 4xT1/E1 Multiplexers iConverter 4xT1/E1 MUX/M Managed Fixed-Configuration T1/E1 Multiplexers • 10/100/1000 UTP Ethernet multiplexed with up to four independent T1 or E1 circuits • Managed via local serial port, TELNET or SNMP iConverter 4xT1/E1 MUX and 4xT1/E1 MUX/M T1/E1 Managed and Unmnaged Fixed-Configuration Multiplexers The iConverter Managed and Unmanaged 4xT1/E1 MUXes multiplex up to four T1/E1 copper circuits and an Ethernet UTP service onto a fiber optic transport link. The 4xT1/E1 MUXes operate in a back-to-back configuration, with one multiplexer at each end of the fiber link. The four copper ports support RJ-48 connectors for balanced T1/E1 applications. An optional adapter cable is available to convert to BNC interfaces for unbalanced E1 transport applications. The 4xT1/E1 MUXes are available with AC or DC power. The AC models accept AC power input ranging from 100VAC to 240VAC, 50/60Hz, and the DC models accept 18VDC to 60VDC. • Supports multimode, single-mode dual fiber and single-mode single-fiber in standard and CWDM wavelengths • Small Form Pluggable (SFP) transceivers or fixed fiber connectors • Configurable alarm relay contacts for audio/visual fault notification • AMI, B8ZS and HDB3 line codes • Local and remote loop-back, and circuit test modes • Alarm relay and LEDs provide fault notification for loss of power, LOS and AIS Connector Type Fiber Distance Wavelength (nm) ST SC SFP MM-DF 220/550m 850 8820N-5 8822N-5 8839N-0** MM-DF 12km 1310 8820N-0 8822N-0 SM-DF 34km 1310 8821N-1 8823N-1 SM-DF 80km 1310 SM-DF 110km 1550 - SM-DF 140km 1550 - 8823N-5 SM-SF 20km 1310/1550 - 8830N-1* - SM-SF 20km 1550/1310 - 8831N-1* - SM-SF 40km 1310/1550 - 8830N-2* - SM-SF 40km 1550/1310 - 8831N-2* - 9140-3 8823N-2 8823N-3 Adapter Cable RJ-48 to BNC 3 ft * Single-Fiber MUXes have the Tx and Rx reversed at each end. For example, the 8830N-1 must be ordered with the 8831N-1. ** Order SFP separately. See SFP ordering information on pages 50 and 51. To order AC power, add a "B" to the model number - 88xx-x-B To order DC power, add a "C" to the model number - 88xx-x-C To order wide temperature (-40 to 60°C), add a “W” to the end of the model number - 88xxN-x-xW Example: 8820N-0-BW = MM-DF, 12km, 1310nm, ST, AC power, wide temperature iConverter 4xT1/E1 MUX Unmanaged Fixed-Configuration T1/E1 Multiplexers • Optional 10/100 UTP Ethernet multiplexed with up to four independent T1 or E1 circuits • Cost-effective, unmanaged T1/E1 Multiplexer Fiber Distance Wavelength (nm) SFP Connector Type ST SC MT-RJ LC 8839-0** MM-DF 2km 850 8820-5 8822-5 - - MM-DF 5km 1310 8820-0 8822-0 8824-0 8826-0 SM-DF 30km 1310 8821-1 SM-DF 60km 1310 SM-DF 120km 1550 SM-SF 20km SM-SF 8823-1 8825-1 8827-1 8823-2 - 8827-2 - 8823-3 - 8827-3 1310/1550 - 8830-1* - - 20km 1550/1310 - 8831-1* - - SM-SF 40km 1310/1550 - 8830-2* - - SM-SF 40km 1550/1310 - 8831-2* - - 9140-3 Adapter Cable RJ-48 to BNC 3 ft * Single-Fiber MUXes have the Tx and Rx reversed at each end. For example, the 8830-1 must be ordered with the 8831-1. ** Order SFP separately. See SFP ordering information on pages 50 and 51. 30 To order an optional 10/100 Ethernet port, add a "U" to the model number - 88xxU-x-x To order AC power, add a "B" to the model number - 88xx-x-B To order DC power, add a "C" to the model number - 88xx-x-C To order wide temperature (-40 to 60°C), add a “W” to the end of the model number - 88xx-x-xW Example: 8820U-5-BW = MM-DF, 2km, 850nm, ST, 10/100 Ethernet port, AC power, wide temperature 31 iConverter Managed Media Converters iConverter RS232 and RS422/485 iConverter X21 Serial X.21 to Fiber Converter Modules The iConverter X21 serial-to-fiber media converter supports X.21 and RS-530 applications, and features several configuration modes to enable connections with a wide variety of X.21 and RS-530 devices. The X21 can auto-detect and configure itself to match the baud rate of the connected device up to 8.192Mbps. • X.21 and RS-5301 serial to fiber media converter • The RS422/485 provides automatic Full-Duplex baud rate detection in Point-to-Point operation • DCE-sourced or terminal clock modes • Supports serial data rates up to 8.192Mbps • The RS422/485 supports point-to-multipoint operation in HalfDuplex and Full-Duplex at baud rates up to 921,600 baud • Supports different serial interface genders • Features local loop-back for easy testing of fiber and serial interfaces • Available as a manageable plug-in module and unmanaged standalone unit SFP Connector Type ST SC MT-RJ Distance Wavelength (nm) Connector Type ST SC MT-RJ LC iConverter RS232 • ST, SC, LC and MT-RJ fixed-fiber connectors Distance • Both the RS232 and RS422/485 feature a remote fiber loopback switch for easy testing of fiber link, even during serial transmission Fiber • Small Form Pluggable (SFP) transceivers for standard or CWDM wavelengths Fiber The iConverter RS232 and iConverter RS422/485 are serial to fiber converters that extend serial protocol over fiber. They provide easy connection to serial devices with a full complement of control signaling lines and DIP-switch selection for DTE or DCE connections. The serial port interface is available with a DB-9 connector or a terminal block connector for field wiring. • The RS232 provides automatic baud rate detection • Auto-configuration of baud rates Wavelength (nm) Serial RS232 & RS422/485 to Fiber Converter Modules LC 8859-0** MM 5km 1310 8760-0 8762-0 8764-0 8766-0 SM 30km 1310 8761-1 8763-1 8765-1 8767-1 SM 60km 1310 8761-2 8763-2 - 8767-2 SM 120km 1550 - 8763-3 - 8767-3 SM-SF 20km 1310/1550 - 8770-1* - - SM-SF 20km 1550/1310 - 8771-1* - - SM-SF 40km 1310/1550 - 8770-2* - - SM-SF 40km 1550/1310 - 8771-2* - - MM 2km 850 8840-5 - - - MM 5km 1310 8840-0 8842-0 8844-0 8846-0 SM 30km 1310 8841-1 8843-1 8845-7 8847-1 SM 60km 1310 8841-2 8843-2 - 8847-2 SM 120km 1550 - 8843-3 - 8847-3 SM-SF 20km 1310/1550 - 8850-1* - - SM-SF 20km 1550/1310 - 8851-1* - - MM 5km 1310 8780-0 8782-0 8784-0 8786-0 SM-SF 40km 1310/1550 - 8850-2* - - SM-SF 40km 1550/1310 - 8851-2* - - SM 30km 1310 8781-1 8783-1 8785-1 8787-1 SM 60km 1310 8781-2 8783-2 - 8787-2 SM 120km 1550 - 8783-3 - 8787-3 SM-SF 20km 1310/1550 - 8790-1* - - SM-SF 20km 1550/1310 - 8791-1* - - SM-SF 40km 1310/1550 - 8790-2* - - SM-SF 40km 1550/1310 - 8791-2* - - 1 Supports RS-530 DCE and DTE co-directional timing, Tx and Rx data, and two control lines. * Single-fiber converters must be used in pairs. ** Order SFP separately. See SFP ordering information on pages 50 and 51. To order an unmanaged standalone model, add a suffix to the model number as follows: - A: Tabletop with US AC Power Supply Adapter (supports DIN-rail Bracket) - B: Tabletop with Universal AC Power Supply Adapter (supports DIN-rail Bracket) - C: Tabletop with DC Power Terminal Connector (supports DIN-rail Bracket) - D: Wall-mount with US AC Power Supply Adapter - E: Wall-mount with Universal AC Power Supply Adapter - F: Wall-mount with DC Power Terminal Connector iConverter RS422/485 For wide temperature (-40 to 60°C), add a “W” to the end of the model number. For extended temperature (-40 to +75°C), add a “Z” to the end of the model number. * Single-Fiber converters must be used in pairs. For modules with terminal block serial ports, add a “T” before the dash “-” in the model number. Examples: 8760T-0, 8780T-0. Example: 8840-0-AW = MM, 5km, 1310, ST, Wall-mount with US AC Power Supply Adapter, wide temperature. For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. 32 33 iConverter Managed Media Converters iConverter OC3FF and OC12FF iConverter xFF Multimode to Single-mode Converter Modules SFP to SFP Media Converter/Transponder Modules • Converts multimode (MM) to single-mode (SM) dual fiber and dual fiber to single-fiber (SF) • SFP to SFP fiber converter and wavelength transponder • Remote Fault Detection and Link Propagation modes • Supports Fast and Gigabit Ethernet, OC-3 (STM-1), OC-12 (STM-4), OC-48 (STM-16) and 1/2/4 Gigabit Fibre Channel The iConverter OC3FF and OC12FF multimode to single-mode fiber converter modules extend network distances and connect dissimilar fiber cabling. Modules are available to support OC3/ STM-1 and OC12/STM-4 technologies. Fiber Port 1/Port 2 Distance Port 1/Port2 Wavelength (nm) Port 1/Port2 Connector Type ST SC iConverter OC3FF The iConverter xFF is a protocol-transparent, SFP to SFP media converter that provides reliable and cost-effective conversion between different optical wavelengths, multimode and singlemode fiber, and dual and single-fiber networks. • Supports data rates of 1Mbps to 4.25Gbps • Wavelength conversion for CWDM and DWDM applications • User-selectable link fault detection modes MM/SM 5km/30km 1310/1310 8660-1 8661-1 Model # Description MM/SM 5km/60km 1310/1310 8660-2 8661-2 8699-0* xFF Chassis Plug-in Module MM/SM 5km/120km 1310/1550 - 8661-3 MM/SM-SF 5km/20km 1310/13-15 8670-1* 8674-1* MM/SM-SF 5km/20km 1310/15-13 8671-1* 8675-1* MM/SM-SF 5km/40km 1310/13-15 8670-2* 8674-2* MM/SM-SF 5km/40km 1310/15-13 8671-2* 8675-2* SM/SM-SF 30km/20km 1310/13-15 8672-1* 8676-1* SM/SM-SF 30km/20km 1310/15-13 8673-1* 8677-1* SM/SM-SF 30km/40km 1310/13-15 8672-2* 8676-2* SM/SM-SF 30km/40km 1310/15-13 8673-2* 8677-2* iConverter OC12FF iConverter OC3/STM1 OC-3/STM-1 Coax to Fiber Media Converter Modules MM/SM 550m/12km 1310/1310 - 8681-1 MM/SM 550m/34km 1310/1310 - 8681-2 MM/SM 550m/80km 1310/1550 - 8681-3 The iConverter OC3/STM1 converts OC-3/STM-1e coax to OC-3/STM-1 fiber. MM/SM-SF 550m/20km 1310/13-15 - 8690-1* MM/SM-SF 550m/20km 1310/15-13 - 8691-1* • Mini-BNC connectors with standard BNC adapters SM/SM-SF 12km/20km 1310/13-15 - 8692-1* SM/SM-SF 12km/20km 1310/15-13 - 8693-1* * Single-fiber converters must be used in pairs. All single-fiber ports are SC connectors. To order an unmanaged standalone model, add a suffix to the model number as follows: D = Wall-Mount with External US AC Power Supply Adapter E = Wall-Mount with External Universal AC Power Supply Adapter F = Wall-Mount with DC Terminal Power For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Example: 8660-1-DW = MM/SM, 5km/30km, 1310, ST Connector, Wall-Mount External US AC Power Supply, wide temperature Contact Omnitron for other fiber options and extended temperature (-40 to +75°C) models. • SFP transceivers for standard and CWDM wavelengths • Multimode, single-mode and single-fiber Model # Description 8899S-0* OC3/STM1 Chassis Plug-In Module * Order SFP separately. See SFP ordering information on pages 50 and 51. The iConverter xFF and STM1 media converters are available as chassis managed plug-in modules or compact, unmanaged standalone units. To order an unmanaged standalone unit, add a suffix to the model number as follows: D = Wall-Mount with External US AC Power Supply E = Wall-Mount with External Universal AC Power Supply F = Wall-Mount with DC Terminal Power For wide temperature (-40 to 60°C), add a “W” to the end of the model number. Contact Omnitron for extended temperature (-40 to +75°C) models. 34 35 iConverter CWDM Multiplexers iConverter CWDM Multiplexer/Demultiplexer Modules iConverter Coarse Wave Division Multiplexing (CWDM) Multiplexer/Demultiplexer modules support ITU-T G694.2 wavelengths between 1270nm to 1610nm in 20nm increments. iConverter CWDM modules are protocol and rate transparent allowing different services up to 10Gbps each to be transported across the same fiber link. They provide a reliable and costeffective solution for increasing bandwidth capacity over existing fiber infrastructure in Service Provider, Municipal, Utility and Enterprise networks. iConverter CWDM/X CWDM Multiplexer Modules for Duplex Fiber The passive iConverter CWDM/X modules are available in 4 and 8-Channel (wavelength) models, supporting a variety of wavelength combinations and port configurations. The CWDM/X features an optional Expansion Port that enables cascading two MUX/DEMUX modules, doubling the channel capacity on the common dual fiber link. For example, two 4-Channel modules can be cascaded to create a 8-Channel fiber common link. iConverter CWDM modules utilize a small and scalable plugin form factor, and can be installed in any iConverter chassis achieving some of the highest port densities in the industry. The modules are designed to be integrated with other iConverter media converters and transponders to provide a true multi-service platform capable of delivering 10, 100, Gigabit and 10 Gigabit Ethernet, Serial, TDM, SONET and other services across a CWDM common link. They are passive devices that can be installed in a powered chassis for managed applications. • Protocol and rate transparent for applications up to 10Gbps • Highly compact form factor with up to 120 ports in a 2U chassis The CWDM/X also features an optional 1310nm Pass Band Port that allocates 1260nm to 13160nm for a standard 1310nm network (such as SDH or SONET). CWDM channels in the range of 1470nm to 1610nm can be overlaid on the same fiber pair as the existing 1310nm network with no changes to the legacy equipment. Module Type CWDM/X 4-Channel • Seamless integration with other iConverter SFP media converters and chassis for multi-service platforms • Minimal and uniform optical loss for easy network planning • Industry standard LC connectors • Manageable via SNMPv1/2c/3 or TELNET • One (1) Year Warranty and Free 24/7 Technical Support For CWDM Transponder modules, see the iConverter XG (page 14) and the iConverter xFF (page 35). CWDM/X 8-Channel Channel Port # of Model ITU Center Wavelength Chassis Number (nm) Slots 1310 Pass Band Port1 Expansion Port2 No 8860-0 1471, 1491, 1591, 1611 1 No 8860-1 1471, 1491, 1591, 1611 1 Yes No 8860-2 1471, 1491, 1591, 1611 1 Yes Yes 8860-3 1471, 1491, 1591, 1611 1 No Yes 8861-0 1511, 1531, 1551, 1571 1 No No 8861-1 1511, 1531, 1551, 1571 1 Yes No 8862-0 1271, 1291, 1311, 1331, 1351, 1371, 1431, 1451 1 No No 8863-0 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611 1 No No 8863-1 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611 2 Yes No 1 1310 Pass Band port supports 1310 +/2 EXP port supports 1511nm to 1571nm. 50nm. Use with legacy 1310 device. Use with 8861-0 or legacy 1550 device. Contact Omnitron for customized CWDM models. 36 37 iConverter CWDM Multiplexers iConverter Band-Splitter and 1310 Pass Band OADM The iConverter Band Splitter module combines and separates the upper CWDM Channels (1470nm to 1610nm) and the lower CWDM Channels (1270nm to 1450nm). The iConverter 1310 Pass Band OADM adds and drops the 1310 Pass Band (1260nm to 1360nm) on both directions of the CWDM fiber link. iConverter CWDM/AD CWDM Add/Drop Multiplexer Modules for Duplex Fiber Model Number Module Type 8865-0 CWDM Band Splitter (OADM) that add (multiplex) and drop (demultiplex) selected channels on one or both directions of a duplex CWDM fiber link. iConverter CWDM/AD modules enable adding new access points anywhere on a CWDM network, without impacting the remaining channels traversing the network. 8867-1 1310 Pass Band OADM iConverter CWDM/AD modules are Optical Add/Drop Multiplexers 1-Channel CWDM/AD (ITU Center wavelength in nm) Channel Port - Model # 8867-xx (xx= two digit number below) iConverter Single-Fiber CWDM/X Single-Fiber iConverter CWDM/X modules are available in 2 and 4-Channel models. Model Type 27 = 1271 33 = 1331 39 = 1391 45 = 1451 51 = 1511 57 = 1571 29 = 1291 35 = 1351 41 = 1411 47 = 1471 53 = 1531 59 = 1591 31 = 1311 37 = 1371 43 = 1431 49 = 1491 55 = 1551 61 = 1611 2-Channels 2-Channel CWDM/AD (lower band - ITU Center wavelength in nm) Model # 8868-xx (xx= two digit number below) Model Number Channel Port ITU Center Wavelength Tx/Rx (nm) 8870-0 1471/1491, 1511/1531 8871-0 1491/1471, 1531/1511 8872-0 1551/1571, 1591/1611 8873-0 1571/1551, 1611/1591 8874-0 1271/1291, 1311/1331, 1351/1371, 1431/1451 8875-0 1291/1271, 1331/1311, 1371/1351, 1451/1431 8876-0 1471/1491, 1511/1531, 1551/1571, 1591/1611 8877-0 1491/1471, 1531/1511, 1571/1551, 1611/1591 Channel Port 1 1291 1311 1331 1351 1371 1391 1411 1431 1451 1271 01 02 03 04 05 06 07 08 09 1291 - 12 13 14 15 16 17 18 19 1311 - - 23 24 25 26 27 28 29 1331 - - - 34 35 36 37 38 39 1351 - - - - 45 46 47 48 49 1371 - - - - - 56 57 58 59 1391 - - - - - - 67 68 69 1411 - - - - - - - 78 79 iConverter Single-Fiber CWDM/AD 1431 - - - - - - - - 89 iConverter 1-Channel Single-Fiber CWDM/AD modules add and 2-Channel CWDM/AD (upper band ITU Center wavelength in nm) Model # 8869-xx (xx= two digit number below) Channel Port 1 1491 1511 1531 1551 1571 1591 1611 1471 01 02 03 04 05 06 07 1491 - 12 13 14 15 16 17 4-Channels Single-fiber CWDM/X models must be used in pairs. drop one channel on one or both directions of a CWDM singlefiber link. 1-Channel CWDM/AD (ITU Center Wavelength in nm) Channel Port Wavelength Pairing - Model # 8878-xx 27 = 1271/1291 39 = 1391/1411 51 = 1511/1531 1511 - - 23 24 25 26 27 31 = 1311/1331 43 = 1431/1451 55 = 1551/1571 1531 - - - 34 35 36 37 35 = 1351/1371 47 = 1471/1491 59 = 1591/1611 1551 - - - - 45 46 47 1571 - - - - - 56 57 1591 - - - - - - 67 Contact Omnitron for custom CWDM modules. NOTE: When using with 1310nm legacy SDH/SONET, wavelengths between 1260nm to 1360nm should not be used. Contact Omnitron for custom CWDM modules. 38 39 miConverter Miniature Media Converters miConverter Miniature Media Converters The miniature (less than 5 ounces) miConverter copper UTP to fiber media converters provide cost-effective fiber connectivity to a desktop computer or a portable laptop. A special USB power adapter cable allows the miConverter to be powered by a computer USB port. Models with external AC power supplies in US and International versions are also available. miConverter GX/T and miConverter Gx UTP to Fiber Gigabit Media Converters The miConverter GX/T converts 10/100/1000BASE-T UTP copper to 1000BASE-X fiber and supports jumbo frames up to 10,240 bytes. It features fixed fiber connectors or SFP transceivers for standard and CWDM wavelengths. Both the fiber and UTP ports support autonegotiation, Pause and link fault modes that can be configured with DIP-switches. The miConverter Gx converts 1000BASE-T UTP copper to 1000BASE-X fiber. It features a UTP port that auto-detects the duplex and Pause modes which can be configured with DIP-switches, and features advanced fault detection modes for link failure notification. • Powered from an AC/DC power adapter or a USB port • Auto or manual UTP configuration • Advanced fault detection modes • The miConverter GX/T supports 10,240 byte jumbo frames and features fixed fiber connectors or SFPs Fiber Distance Wavelength (nm) miConverter Gx ST SC miConverter GX/T ST - SC 1239-0-x** miConverter 10/100 and 10/100 Plus 10/100 UTP to Fast Ethernet Fiber Media Converters The miniature miConverter 10/100 is a rate-switching copper UTP to fiber media converter. The miConverter 10/100 provides plug-and-play set up with a UTP port that auto-detects the speed, duplex mode and crossover function of the connected device. In addition to the features listed above, the miConverter 10/100 Plus features DIP-switches for manual UTP port configuration and advanced link fault detection modes. • Supports 10BASE-T, 100BASE-TX and 100BASE-FX • Multimode (MM), single-mode (SM) and single-fiber (SF) • Powered from an AC/DC power adapter or a USB port • The miConverter 10/100 Plus features manual UTP configuration and advanced fault detection modes Fiber Distance Wavelength (nm) miConverter 10/100 miConverter 10/100 Plus ST SC MM 5km 1310 1100-0-x 1102-0-x ST SC 1120-0-x 1122-0-x SM 30km 1310 1101-1-x 1103-1-x 1121-1-x 1123-1-x SM 60km 1310 1101-2-x 1103-2-x 1121-2-x 1123-2-x SM 120km 1550 - 1103-3-x - 1123-3-x SM-SF 20km 1310/1550 - 1110-1-x* - 1130-1-x* SM-SF 20km 1550/1310 - 1111-1-x* - 1131-1-x* SM-SF 40km 1310/1310 - 1110-2-x* - 1130-2-x* SM-SF 40km 1550/1310 - 1111-2-x* - 1131-2-x* *Single-fiber converters must be used in pairs. To order a power supply, add a suffix to the model number (replace "x") as follows: -1 External US AC Power Adapter -2 External Universal Power Adapter -3 External European Power Adapter -4 External UK AC Power Adapter -5 External Australian AC Power Adapter -6 USB Power Adapter Cable -8 External Japan/US AC Power Adapter -9 2-pin 5-12VDC terminal connector (Available only with GX/T) SFP - - MM 220m/550m 850 1200-0-x 1202-0-x 1220-0-x 1222-0-x SM 12km 1310 1201-1-x 1203-1-x 1221-1-x 1223-1-x SM 34km 1310 - 1203-2-x - 1223-2-x SM 80km 1550 - 1203-3-x - 1223-3-x SM 110km 1550 - 1203-4-x - 1223-4-x Wall mount brackets model number 1091-0. SM 140km 1550 - 1203-5-x - 1223-5-x Example: 1100-0-1 = miConverter 10/100 MM/DF/5km/1310/ST with External US AC Power Adapter. SM-SF 20km 1310/1550 - 1210-1-x* - 1230-1-x* Contact Omnitron for other fiber options and wide temperature (-40 to +60°C) models. SM-SF 20km 1550/1310 - 1211-1-x* - 1231-1-x* SM-SF 40km 1310/1550 - 1210-2-x* - 1230-2-x* SM-SF 40km 1550/1310 - 1211-2-x* - 1231-2-x* *Single-fiber converters must be used in pairs. ** Order the required SFPs separately. See SFP ordering information on pages 50 and 51. To order a power supply, add a suffix to the model number as shown on page 41. 40 41 FlexPoint Unmanaged Media Converters FlexPointTM self-contained media converter modules provide unmanaged copper-to-fiber and fiber-to-fiber media conversion. Network administrators can mix and match FlexPoint modules in a chassis for fiber access in a variety of network configurations. FlexPoint GX/T 10/100/1000 Mbps UTP to Gigabit Fiber Media Converters FlexPoint 14-Module Power-Redundant Chassis Available in 110/230VAC or 48VDC, the Powered Chassis holds 14 individually secured and hot-swappable FlexPoint converters. Two redundant hot-swappable power supplies ensure continuous and reliable network operation. The FlexPoint GX/T is a 10/100/1000BASE-T UTP copper to 1000BASE-X modular fiber media converter that supports jumbo frames up to 10,240 bytes. The GX/T supports both 100BASEFX and 1000BASE-X SFP transceivers for interoperability with Fast Ethernet and Gigabit fiber equipment. • Conforms to 10BASE-T, 100BASE-TX, 1000BASE-T, 100BASE-FX1 and 1000BASE-X specifications • Supports jumbo frames up to 10,240 bytes • Supports dual and single-fiber 100BASE-FX or 1000BASE-X SFP transceivers for standard or CWDM wavelengths FlexPoint 5-Module Rack-Mounting Shelf The rack-mounting shelf provides a flexible, low-cost solution for up to five individually-powered FlexPoint converter modules. • Multimode (MM) and single-mode (SM) fiber with ST and SC connectors and single-fiber (SF) with SC connectors • Both the fiber and UTP ports support auto-negotiation • Auto or manually configured Pause function for flow control • Loopback mode supports end-to-end testing • User-selectable Link Modes with Remote Fault Indicators signal loss of link for Far-End Fault and Link Fault conditions FlexPoint Wall-Mount and DIN-rail kits Wall and DIN-rail mounting kits are available for FlexPoint modules and FlexPoint modules with DC adapters. FlexPoint DC Adapter The FlexPoint DC Adapter allows a FlexPoint media converter to be powered from an 18 to 60VDC power source. • Diagnostic and DIP-switch configurations are displayed with status LEDs for quick and easy installation Connector Type Fiber Distance Wavelength (nm) ST SC SFP - - - - - 4719-x** MM 220/550m 850 4706-x 4700-x - SM 12km 1310 4707-x 4701-x - SM 34km 1310 - 4702-x - SM 80km 1550 - 4703-x - SM 110km 1550 - 4704-x - SM 140km 1550 - 4705-x - SM-SF 20km 1310/1550 - 4710-x* - SM-SF 20km 1550/1310 - 4711-x* - Description 14-Module 5-Module 1-Module 1 Power Supply/AC 4396 - - 1 Power Supply/DC 4386 - - 2 Power Supplies/AC 4395 - - Spare Power Supply/AC 4399 - - SM-SF 40km 1310/1550 - 4712-x* - 2 Power Supplies/DC 4385 - - SM-SF 40km 1550/1310 - 4713-x* - Spare Power Supply/DC 4389 - - FlexPoint Rack Mounting Shelf - 4392 - FlexPoint DC Adapter (18 to 60VDC) - - 4384 Wall Mount Kit (Stand Alone AC) - - 4380 Wall Mount Kit (for DC Adapter) - - 4381 DIN Rail Mounting Bracket - - 8250-0 42 1100BASE-FX is supported on SFP models only. * Single-fiber converters must be used in pairs. ** Order the required SFPs separately. See SFP ordering information on pages 50 and 51. POWER OPTIONS (-x) -0 No Power Supply -1 110V (US Standard) -2 110V/230V Auto-sensing (Universal) Contact Omnitron for other fiber options and wide temperature (-40 to +60°C) models. 43 FlexPoint Unmanaged Media Converters FlexPoint Gx and 100Fx/Tx FlexPoint 10/100 1000Mbps Ethernet UTP to Fiber Media Converters Fast Ethernet UTP to Fiber Media Converters 10/100 UTP to Fast Ethernet Fiber Media Converters The FlexPoint Gx UTP copper to fiber media converters provide transparent integration between 1000BASE-X Gigabit fiber and 1000BASE-T Gigabit UTP devices. The Gx supports jumbo packets and transparently passes VLAN frames. The FlexPoint 100Fx/Tx converts 100BASE-TX UTP copper to Fast Ethernet fiber and supports Half or Full-Duplex autonegotiation with manual override. The 100Fx/Tx supports jumbo packets, transparently passes VLAN frames, and features a UTP crossover switch. Fiber Distance Wavelength (nm) Connector Type ST SC MT-RJ LC 4672-x FlexPoint Gx MM 220m/550m 850 4376-x 4370-x 4670-x SM 12km 1310 4377-x 4371-x 4671-x 4673-x SM 34km 1310 - 4372-x - 4674-x SM 80km 1550 - 4373-x - 4675-x SM 110km 1550 - 4374-x - 4676-x SM 140km 1550 - 4375-x - 4677-x FlexPoint 100Fx/Tx MM 5km 1310 4332-x 4330-x 4336-x - SM 30km 1310 4333-x 4331-x 4337-x - SM 60km 1310 4335-x 4334-x - - SM 85km 1550 - 4350-x - - SM 120km 1550 - 4351-x - - The FlexPoint 10/100 media converters allow connection between any Half and Full-Duplex, copper-based Ethernet devices operating at either 10 or 100Mbps via Fast Ethernet fiber. • UTP 10/100 and Full/Half-Duplex auto-sensing with manual override controls • UTP crossover switch • The fiber port supports 100Mbps Full/Half-Duplex, multimode or single-mode fiber, SC, ST or MT-RJ connectors • The fiber port supports distances up to 120km Connector Type Fiber Distance Wavelength (nm) ST SC MT-RJ LC MM 5km 1310 4342-x 4340-x 4346-x 4355-1x SM 30km 1310 4343-x 4341-x 4348-x 4355-2x SM 60km 1310 4345-x 4344-x - 4355-3x SM 120km 1550 - 4349-x - 4355-4x SM/SF 20km 1310/1550 - 4357-1x* - - SM/SF 20km 1550/1310 - 4357-2x* - - * Single-fiber converters must be used in pairs. POWER OPTIONS (-x) -0 No Power Supply -1 110V (US Standard) -2 110V/230V Auto-sensing (Universal) Contact Omnitron for other fiber options and wide temperature (-40 to +60°C) models. POWER OPTIONS (-x) -0 No Power Supply -1 110V (US Standard) -2 110V/230V Auto-sensing (Universal) Contact Omnitron for other fiber options and wide temperature (-40 to +60°C) models. 44 45 FlexPoint Unmanaged Media Converters FlexPoint 10FL/T, 10FL/2, 10T/2 & 10AUI/T FlexPoint 100FF, 1000FF, OC3FF, OC12FF Ethernet Media Converters Single-mode to Multimode Fiber Converters The FlexPoint 10Mbps converters provide media conversion between fiber (multimode or single-mode) and UTP or coax. The FlexPoint fiber to fiber converters convert between singlemode and multimode fiber. They support 10, 100 and Gigabit Ethernet, OC-3/STM-1, OC-12/STM-4, SONET, Token Ring, FDDI and Fibre Channel. • The FlexPoint 10FL/T connects 10BASE-FL fiber and 10BASE-T UTP copper. It features a UTP crossover switch and supports distances up to 120km • The FlexPoint 10FL/2 connects 10BASE-FL fiber and 10BASE-2 coax with a coax termination switch • The FlexPoint 10T/2 connects 10BASE-2 coax and 10BASE-T UTP copper, and features a UTP crossover switch and a coax termination switch • The FlexPoint 10AUI/T connects AUI and 10BASE-T UTP copper Fiber Distance Wavelength (nm) SC MT-RJ • The FlexPoint 1000FF supports Gigabit Ethernet and Fibre Channel, and is available with SC connectors • The FlexPoint OC3FF supports OC-3/STM-1 and is available with ST and SC connectors • The FlexPoint OC12FF supports OC-12/STM-4 and is available with SC connectors Connector Type ST • The FlexPoint 100FF supports Ethernet, Fast Ethernet, Token Ring and FDDI, and is available with ST and SC connectors Coax Fiber Port 1/Port 2 Wavelength (nm) Port 1/Port2 Distance Port 1/Port2 Connector Type ST SC FlexPoint 100FF FlexPoint 10FL/T MM 2km 850 4300-x 4303-x - - MM/MM 5km/5km 1310/1310 4420-x 4421-x MM 5km 1310 4302-x - 4305-x - MM/MM 2km/5km 850/1310 4418-x 4419-x SM 30km 1310 4301-x - 4308-x - MM/SM 5km/30km 1310/1310 4410-x 4411-x SM 60km 1310 4304-x - - - MM/SM 5km/60km 1310/1310 4412-x 4413-x SM 85km 1550 - 4306-x - - MM/SM 2km/30km 850/1310 4414-x 4415-x SM 120km 1550 - 4307-x - - MM/SM 2km/60km 850/1310 4416-x 4417-x MM 2km 850 4310-x - - - MM/SM 220-550m/12km 850/1310 - 4433-x MM 5km 1310 4312-x - - - MM/SM 220-550m/34km 850/1310 - 4440-x SM 30km 1310 4311-x - - - MM/SM 220-550m/80km 850/1550 - 4437-x SM/SM 12km/34km 1310/1310 - 4441-x FlexPoint 1000FF FlexPoint 10FL/2 FlexPoint 10T/2 UTP/Coax 100m/185m - - - - FlexPoint 10AUI/T (AUI Connector) UTP/AUI 100m/50m - 4321-x POWER OPTIONS (-x) -0 No Power Supply -1 110V (US Standard) -2 110V/230V Auto-sensing (Universal) Contact Omnitron for other fiber options and wide temperature (-40 to +60°C) models. FlexPoint OC3FF 4320-x MM/SM 5km/30km 1310/1310 4450-x 4451-x MM/SM 5km/60km 1310/1310 4452-x 4453-x MM/SM 2km/30km 850/1310 4454-x 4455-x MM/SM 2km/60km 850/1310 4456-x 4457-x MM/SM 550m/12km 1310/1310 - 4461-x MM/SM 550m/34km 1310/1310 - 4463-x MM/SM 550m/80km 1310/1550 - 4469-x FlexPoint OC12FF POWER OPTIONS (-x) -0 No Power Supply -1 110V (US Standard) -2 110V/230V Auto-sensing (Universal) 46 Contact Omnitron for other fiber options and wide temperature (-40 to +60°C) models. 47 OmniConverter FlexPoint FlexPoint T1/E1 OmniConverter GPoE/S T1/E1 Copper to Fiber Media Converter Multi-port Gigabit Media Converter with PoE/PSE The T1/E1 extends twisted pair and coax distances over fiber. It supports ANSI, AT&T, ITU and ETSI standards, and AMI, B8ZS and HDB3 line codes. The T1/E1 features a crossover switch, fiber loopback and relay contacts for connection to alarm equipment. Connector Type Wavelength (nm) The OmniConverter GPoE/S is a multi-port media converter that provides 10/100/1000BASE-T UTP to 100BASE-FX or 1000BASE-X fiber and supports Power-over-Ethernet (PoE). A variety of port configurations are available, including single or dual UTP or SFP ports. The OmniConverter GPoE/S supports both the IEEE 802.3af Power-over-Ethernet (PoE) and IEEE 802.3at (PoE+) standards. Classified as Power Sourcing Equipment (PSE), the GPoE/S can provide power to one or two Powered Devices (PDs) using standard UTP cables that carry the Ethernet data. Fiber Distance MM 5km 1310 4472-x SM 30km 1310 4473-x 4471-x SM 60km 1310 - 4474-x The GPoE/S can be used to power a variety of PDs such as IP phones, wireless access points and network cameras. The GPoE/S standard models (802.3af) provide up to 15.4W of power per port. The high power GPoE/S models support the new IEEE 802.3at (PoE+) standard and provide up to 25.5W per port. ST SC FlexPoint T1/E1 Copper RJ-45/RJ-48 to Fiber 4470-x FlexPoint T1/E1 Copper Coax + RJ-45/RJ-48 to Fiber MM 5km 1310 4492-x 4490-x SM 30km 1310 4493-x 4491-x SM 60km 1310 - 4494-x • Supports IEEE 802.3af PoE and IEEE 802.3at PoE+ • Supports legacy non-IEEE compatible powered devices • Models available with redundant SFP port option WaveFiber Distance length (nm) FlexPoint 232 RS-232 to Fiber Media Converter The FlexPoint 232 is a serial RS-232 to fiber converter with support for five control signals that enables flexible RS-232 network connectivity for a variety of serial applications. Connector Type Fiber Distance Wavelength (nm) ST SC MT-RJ MM 2.5km 850 4481-x 4480-x - MM 5km 1310 4483-x 4482-x 4487-x SM 30km 1310 4485-x 4484-x 4488-x SM 60km 1310 - 4486-x - POWER OPTIONS (-x) -0 No Power Supply -1 110V (US Standard) -2 110V/230V Auto-sensing (Universal) Contact Omnitron for other fiber options and wide temperature (-40 to +60°C) models. 48 MM 220/550m 850 SM 12km 1310 SM 34km 1310 SM 80km 1550 SM 110km 1550 SM 140km 1550 SM-SF 20km 13/15 Connector Type ST PoE SC PoE+ PoE 100/1000 SFP PoE+ PoE PoE+ 9400-0 9420-0 9402-0 9422-0 9401-0 9421-1 9403-1 9423-1 9403-2 9423-2 9403-3 9423-3 9403-4 9423-4 9403-5 9423-5 9410-1* 9430-1* SM-SF 20km 15/13 - - 9411-1* 9431-1* SM-SF 40km 13/15 - - 9410-2* 9430-2* SM-SF 40km 15/13 100/1000 SFP 100/1000 SFP (x2) - - 9411-2* 9431-2* 9419-0** 9439-0** 9419-1** 9439-1** *Single-fiber converters must be used in pairs. ** Order the required SFPs separately. See SFP ordering information on pages 50 and 51 To order number of UTP ports, add a number below to the model number - 94xx-x-Yz 1 - One (1) UTP Port 2 - Two (2) UTP Ports To order an external power supply, add a number below to the model number - 94xx-x-yZ 1 - External PS, 100-240VAC, with US Power Cord 2 - External PS, 100-240VAC, with no Power Cord 9 - No external PS, direct 48VDC input, with 3 pos. terminal block To order wide operating temperature range (-40 to 60°C) add a "W" to the end of the model number - 94xx-x-yzW. Contact Omnitron for other fiber options and extended operating temperature range (-40 to 75°C) models. 49 SFP, SFP+ and XFP Transceivers Small Form Pluggable Transceivers Omnitron SFPs are interchangeable compact fiber transceivers that enable connectivity to a wide variety of fiber optic cables and wavelengths, including single-fiber, single-mode, multimode and Coarse Wave Division Multiplexing (CWDM). Based on the MSA SFF-8472 standard, Omnitron SFPs provide enhanced digital diagnostic information not available on most SFPs. SNMP management software, such as NetOutlook, can collect real-time diagnostic information including fiber optic power, voltage and temperature of the SFP transceiver. • For use with iConverter, miConverter, FlexPoint, OmniConverter, and third party equipment that supports SFPs • LC Connectors • Hot-pluggable with durable metal enclosure SFPs for Fast Ethernet, SONET OC-3, SDH STM-1, T1/E1, T3/E3 and X21 Fiber Type MM/DF SM/DF SM/DF SM/DF SM/SF SM/SF SM/SF SM/SF Distance 5km 30km 60km 120km 30km 30km 50km 50km Model # 7006-0 7007-1 7007-2 7007-3 7014-1 7015-1 7014-2 7015-2 Tx 1310 1310 1310 1550 1310 1550 1310 1550 Rx 1310 1310 1310 1550 1550 1310 1550 1310 SFPs for Gigabit Ethernet, SONET OC-12 and SDH STM-4 Fiber Type MM/DF SM/DF SM/DF SM/DF SM/DF SM/DF SM/SF SM/SF SM/SF SM/SF SM/SF SM/SF SM/SF SM/SF Distance 220/550m 12km 34km 80km 110km 140km 20km 20km 40km 40km 60km 60km 20km 20km Model # 7206-0 7207-1 7207-2 7207-3 7207-4 7207-5 7214-1 7215-1 7214-2 7215-2 7214-3 7215-3 7216-1 7217-1 Tx 850 1310 1310 1550 1550 1550 1310 1550 1310 1550 1310 1550 1310 1490 Rx 850 1310 1310 1550 1550 1550 1550 1310 1550 1310 1550 1310 1490 1310 10 Gigabit SFP+ (Ethernet, Fibre Channel, SONET) with Digital Diagnostics Fiber Distance Model # Description MM 300m* 7406-0 10GBASE-SR SFP+ Wavelength 850 SM 10km 7407-1 10GBASE-LR SFP+ 1310 10 Gigabit XFP (Ethernet, Fibre Channel, SONET) with XFI-side Digital Diagnostics MM 300m* 7426-0 10GBASE-SR XFP 850 SM 10km 7427-1 10GBASE-LR XFP 1310 SM 40km 7427-2 10GBASE-ER XFP 1550 SM 80km 7427-3 10GBASE-ZR XFP 1550 10 Gigabit Copper XFP N/A 15m 7499-CX4 * Distance obtained with OM3 multimode cable 50 10GBASE-CX4 XFP N/A Gigabit Ethernet SFP Copper Transceivers RJ-45 Connector 7299-RJ 7299-RJ-GI* Data Rate 1000 Mbps 10/100/1000 Mbps Distance 100m (UTP) 100m (UTP) CWDM SFPs for Fast Ethernet, SONET OC-3, SDH STM-1, T1/E1, T3/E3 and X21 Wavelength 1271 1291 1311 Latch - 60km 7127-1 7129-1 7131-1 80km 7127-2 7129-2 7131-2 100km 7127-3 7129-3 7131-3 120km - 140km - 150km - - - - 1331 - 7133-1 7133-2 7133-3 - - - 7135-3 7137-3 7139-3** 7141-3 7143-3 7145-3 - 7147-4 7149-4 7151-4 7153-4 7155-4 7157-4 7159-4 7147-5 7149-5 7151-5 7153-5 7155-5 7157-5 7159-5 7147-6 7149-6 7151-6 7153-6 7155-6 7157-6 7159-6 - 7161-4 7161-5 7161-6 1351 1371 1391 1411 1431 1451 1471 1491 1511 1531 1551 1571 1591 7135-1 7135-2 7137-1 7137-2 7139-1** 7139-2** 7141-1 7141-2 7143-1 7143-2 7145-1 7145-2 Gray Violet Blue Green Yellow Orange Red - 1611 Brown - - CWDM SFPs for Gigabit Ethernet, SONET OC-12 and SDH STM-4 Wavelength Latch 40km 50km 70km 100km 130km 1271 - 7327-1 7327-2 7327-3 - - 1291 - 7329-1 7329-2 7329-3 - - 1311 1331 1351 1371 1391 1411 1431 1451 1471 1491 1511 1531 1551 1571 1591 1611 Gray Violet Blue Green Yellow Orange Red Brown 7331-1 7333-1 7335-1 7337-1 7339-1** 7341-1 7343-1 7345-1 - 7331-2 7333-2 7335-2 7337-2 7339-2** 7341-2 7343-2 7345-2 - 7331-3 7333-3 7335-3 7337-3 7339-3** 7341-3 7343-3 7345-3 7347-3 7349-3 7351-3 7353-3 7355-3 7357-3 7359-3 7361-3 7347-4 7349-4 7351-4 7353-4 7355-4 7357-4 7359-4 7361-4 7347-5 7349-5 7351-5 7353-5 7355-5 7357-5 7359-5 7361-5 * Compatible only with iConverter GX/TM2 and GM3 NIDs. ** Not suitable for use with G.652 fiber (water peak). See Omnitron website for complete listing of SFPs. Contact Omnitron for other SFP options and extended temperature (-40 to +75°C) models. 51
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c006 1.236519, Wed Jun 14 2006 08:31:24 Instance ID : uuid:a1be03dd-38df-43a0-93a3-851e9f5893d7 Document ID : adobe:docid:indd:18cc6109-9f12-11de-ae7c-879099bb75d6 Rendition Class : proof:pdf Derived From Instance ID : 97fa8f18-9e46-11de-a148-b2005f6e7ad1 Derived From Document ID : adobe:docid:indd:97fa8f10-9e46-11de-a148-b2005f6e7ad1 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 600.00, 300.00, 300.00, 299.00, 300.00, 600.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 180.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 140.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 300.00, 600.00, 300.00, 300.00, 299.00, 300.00, 600.00, 600.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 180.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 140.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:370e4215-9e53-11de-ac66-81136e39699e, uuid:43414788-4a76-11db-a37b-8930ca01367f, uuid:2cafe664-9e28-11de-ac66-81136e39699e, uuid:392896e1-9331-11de-bf0f-975464ed65e6, uuid:e696e5b2-9331-11de-bf0f-975464ed65e6, uuid:392896e6-9331-11de-bf0f-975464ed65e6, uuid:f4a6f1cb-4f34-11db-a1d6-9e12e157cdf6, uuid:b907746b-4f3d-11db-a1d6-9e12e157cdf6, uuid:4276b02b-3f34-11de-9f97-c05d2eaf9129, uuid:20568fc9-2f6b-11de-9185-c2a16cc5d970, uuid:2cafe669-9e28-11de-ac66-81136e39699e, uuid:95302d71-2dc8-11de-93f0-8addbd6e51e0, uuid:b30d6a73-56a6-11de-bd9b-8198f11814ee, uuid:b8f80037-56ae-11de-bd9b-8198f11814ee, uuid:66214bfe-30e7-11de-9d4b-822a84af104f, uuid:2a97280e-310e-11de-9d4b-822a84af104f, uuid:66214c06-30e7-11de-9d4b-822a84af104f, uuid:fe85ce1b-91c4-11de-86cd-f6c09945fa01, uuid:00a00e7b-335b-11de-b66f-a677de71ea29, uuid:ddd8444f-3359-11de-b66f-a677de71ea29, uuid:6c12a53f-3508-11de-aceb-a2dbec37ab2a, uuid:8d46be71-c3d9-11de-a7c5-fa09a0129651, uuid:df24ed0d-2ec3-11de-8c84-fc9d4e6b1eba, uuid:59912b37-335b-11de-b66f-a677de71ea29, uuid:4cb0589d-2e9e-11de-8c84-fc9d4e6b1eba, uuid:df24ed0d-2ec3-11de-8c84-fc9d4e6b1eba, uuid:8647e127-965b-11de-a237-a96fd431d20c, uuid:cd31b4c1-2f56-11de-9185-c2a16cc5d970, uuid:3f8d2941-2dd5-11de-93f0-8addbd6e51e0, uuid:7f114e6f-2e94-11de-8c84-fc9d4e6b1eba, uuid:186eac22-335c-11de-b66f-a677de71ea29, uuid:59912b3e-335b-11de-b66f-a677de71ea29, uuid:be435035-9283-11de-94b5-84d5d74a4a24, uuid:bdce8fe6-9268-11de-94b5-84d5d74a4a24, uuid:3da686ed-a2e5-11de-8058-a125a3242cc8, uuid:8bd2be4c-2e93-11de-8c84-fc9d4e6b1eba, uuid:e41cd0d1-335c-11de-b66f-a677de71ea29, uuid:df24ed0d-2ec3-11de-8c84-fc9d4e6b1eba, uuid:4d130bfa-2df4-11de-93f0-8addbd6e51e0, uuid:71603aea-8e72-11de-8f92-cf3ed1927927, uuid:27793b5c-3509-11de-aceb-a2dbec37ab2a, uuid:2e764512-335e-11de-b66f-a677de71ea29, uuid:f9d5ba2b-2f6c-11de-9185-c2a16cc5d970, uuid:26c83130-335f-11de-b66f-a677de71ea29, uuid:7041424b-335f-11de-b66f-a677de71ea29, uuid:9c652003-3379-11de-b66f-a677de71ea29, uuid:c711d7ae-2e9a-11de-8c84-fc9d4e6b1eba, uuid:3a036f7a-9330-11de-bf0f-975464ed65e6, uuid:9af340a1-310a-11de-9d4b-822a84af104f, uuid:ed4bd54a-350e-11de-aceb-a2dbec37ab2a, uuid:d9c974ff-310a-11de-9d4b-822a84af104f, uuid:f9cc95e4-2e9a-11de-8c84-fc9d4e6b1eba, uuid:c63cbae4-2e99-11de-8c84-fc9d4e6b1eba, uuid:521ecf5e-3360-11de-b66f-a677de71ea29, uuid:521ecf63-3360-11de-b66f-a677de71ea29, uuid:c44ec1c5-afb9-11de-ba49-f74a2597cf86, uuid:5f552537-2e9b-11de-8c84-fc9d4e6b1eba, uuid:0e3e7448-2e99-11de-8c84-fc9d4e6b1eba, uuid:8fc230ef-3103-11de-8f50-ae5b302f8743 Manifest Reference Document ID : adobe:docid:photoshop:22593cc1-9e43-11de-ac66-81136e39699e, adobe:docid:photoshop:43414785-4a76-11db-a37b-8930ca01367f, adobe:docid:photoshop:3a036f7e-9330-11de-bf0f-975464ed65e6, adobe:docid:photoshop:fef72e05-9c6c-11dd-906c-d913668bffc0, adobe:docid:photoshop:e696e5b1-9331-11de-bf0f-975464ed65e6, adobe:docid:photoshop:392896e5-9331-11de-bf0f-975464ed65e6, adobe:docid:photoshop:f4a6f1c7-4f34-11db-a1d6-9e12e157cdf6, adobe:docid:photoshop:f4a6f1cc-4f34-11db-a1d6-9e12e157cdf6, adobe:docid:photoshop:cc628dc4-30f0-11de-9d4b-822a84af104f, adobe:docid:photoshop:f233c6ee-2f68-11de-9185-c2a16cc5d970, adobe:docid:photoshop:de38c5ad-3383-11de-b66f-a677de71ea29, adobe:docid:photoshop:95302d70-2dc8-11de-93f0-8addbd6e51e0, adobe:docid:photoshop:5a282200-30e8-11de-9d4b-822a84af104f, adobe:docid:photoshop:e8fe72c1-30ed-11de-9d4b-822a84af104f, adobe:docid:photoshop:bbcca4d7-30e6-11de-9d4b-822a84af104f, adobe:docid:photoshop:2a97280d-310e-11de-9d4b-822a84af104f, adobe:docid:photoshop:66214c05-30e7-11de-9d4b-822a84af104f, adobe:docid:photoshop:07143cc5-2f68-11de-9185-c2a16cc5d970, adobe:docid:photoshop:00a00e7a-335b-11de-b66f-a677de71ea29, adobe:docid:photoshop:16a8e520-2a14-11de-be07-dbb7b774ddd1, adobe:docid:photoshop:6c12a53e-3508-11de-aceb-a2dbec37ab2a, adobe:docid:photoshop:4bfda186-2ec2-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:95e14f34-2e90-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:59912b36-335b-11de-b66f-a677de71ea29, adobe:docid:photoshop:52ec42e6-2dc8-11de-93f0-8addbd6e51e0, adobe:docid:photoshop:95e14f34-2e90-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:fc39611c-2dcf-11de-93f0-8addbd6e51e0, adobe:docid:photoshop:f745726c-2e8e-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:12e81780-2dce-11de-93f0-8addbd6e51e0, adobe:docid:photoshop:39ce00d3-2e94-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:ba1511ed-2e93-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:0f47bdc0-2e94-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:5b049384-8e6a-11de-8f92-cf3ed1927927, adobe:docid:photoshop:9f6e6d54-8dd9-11de-8788-db9456b58c38, adobe:docid:photoshop:213f97c3-8dda-11de-8788-db9456b58c38, adobe:docid:photoshop:8bd2be4b-2e93-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:e41cd0cd-335c-11de-b66f-a677de71ea29, adobe:docid:photoshop:95e14f34-2e90-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:5101cf06-2b6e-11de-9356-ca0db4d6b2d0, adobe:docid:photoshop:95196226-335c-11de-b66f-a677de71ea29, adobe:docid:photoshop:27793b5b-3509-11de-aceb-a2dbec37ab2a, adobe:docid:photoshop:0612dc61-2e90-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:9d87e928-2f6c-11de-9185-c2a16cc5d970, adobe:docid:photoshop:31ecc4f8-3033-11de-b71a-b1462e2a4050, adobe:docid:photoshop:a1cd623e-2f7f-11de-9185-c2a16cc5d970, adobe:docid:photoshop:dc26c30e-3378-11de-b66f-a677de71ea29, adobe:docid:photoshop:c711d7ad-2e9a-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:b4cf3dc9-30fc-11de-9d4b-822a84af104f, adobe:docid:photoshop:9af340a0-310a-11de-9d4b-822a84af104f, adobe:docid:photoshop:fe074d3e-310b-11de-9d4b-822a84af104f, adobe:docid:photoshop:d9c974fe-310a-11de-9d4b-822a84af104f, adobe:docid:photoshop:c711d7b1-2e9a-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:49ae6ce4-2e99-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:7e03f353-2f67-11de-9185-c2a16cc5d970, adobe:docid:photoshop:2746a714-2e98-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:a01f74ec-8e74-11de-8f92-cf3ed1927927, adobe:docid:photoshop:5f552536-2e9b-11de-8c84-fc9d4e6b1eba, adobe:docid:photoshop:c57c9d8e-252e-11de-83c9-d232de07b67b, adobe:docid:photoshop:aedd6426-302f-11de-8e26-bba09e512efb Create Date : 2009:10:28 09:01:59-07:00 Modify Date : 2009:10:28 09:05:50-07:00 Metadata Date : 2009:10:28 09:05:50-07:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 1024 Thumbnail Height : 1024 Thumbnail Image : (Binary data 120001 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 26 Creator : Adobe InDesign CS3 (5.0)EXIF Metadata provided by EXIF.tools