F Series Centro Matic

User Manual: F-Series

Open the PDF directly: View PDF .
Page Count: 64

CM_1_2
CM_2_2
CM_3_2

Lincoln Centro-Matic

automatic lubrication

systems

People, capabilities and systems to save

money and increase productivity

We’re the largest and most successful

company in our ﬁeld because we continu-

ally satisfy our customers with the world’s

best lubrication and pumping systems.

For more than a century, companies have

relied on our technical and quality leader-

ship, our world-class manufacturing and

customer service, and our vast network

of distributors and support facilities.

Lincoln develops new products and

systems at research and development

facilities in the U.S., Germany and India

that provide global and regional applica-

tion solutions.

We have solutions for large processing

plants, automotive manufacturing, pulp

and paper mills, and food and beverage

facilities. Virtually every industrial

professional involved in operations

and maintenance can beneﬁt from

Lincoln systems.

On the road or in the ﬁeld, Lincoln pro-

tects heavy equipment used in mining,

construction, agriculture and over-the-

road trucking. The world’s leading

manufacturers offer our systems as

standard equipment or factory options.

Lincoln builds precision metal compo-

nents, state-of-the-art electronic con-

trols, and the industry’s top-performing

pump systems. Our quality systems in the

United States and Germany are ISO 9001

registered.

With ﬁve technical support centers on

three continents, and a network of

systems houses and distributors suppor-

ted by regional sales and service ofﬁces,

our customers can always draw on our

worldwide resources.

To make sure your investment results in

signiﬁcant savings, Lincoln developed a

unique program called BearingSaver®.

You not only get a complete audit of your

facility, you also receive an analysis of

your return on investment.

Centro-Matic® Automatic Lubrication Systems

Table of Contents

Introduction to Centro-Matic®. . . . . . . . . . . . . . . . . .2

Grease Injectors . . . . . . . . . . . . . . . . . . . . . . . . .5

Oil Injectors . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Metric Injectors . . . . . . . . . . . . . . . . . . . . . . . . . 16

Injector Accessories . . . . . . . . . . . . . . . . . . . . . . 17

FlowMaster® II Pump . . . . . . . . . . . . . . . . . . . . . . 19

Reservoir Level Sensor, Overﬂow Prevention System . . . . 21

Hydraulic Lubrication Systems - Hammer Pumps . . . . . . 23

P653S Electric Pump . . . . . . . . . . . . . . . . . . . . . . 25

P603S Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Manual Grease Pumps . . . . . . . . . . . . . . . . . . . . . 30

Air-Operated (Single Stroke) Grease Pumps . . . . . . . . . 31

Air-Operated (Reciprocating) Grease Pumps . . . . . . . . . 33

Electric Grease Pumps . . . . . . . . . . . . . . . . . . . . . 35

Manually Operated Oil Pumps . . . . . . . . . . . . . . . . . 35

Air-Operated (Single Stroke) Oil Pumps. . . . . . . . . . . . 36

Air-Operated (Reciprocating) Oil Pumps . . . . . . . . . . . 37

Electric-Operated Oil Pumps . . . . . . . . . . . . . . . . . 38

Bucket Pumps . . . . . . . . . . . . . . . . . . . . . . . . . 39

FlowMaster® Hydraulic Pump . . . . . . . . . . . . . . . . . 40

FlowMaster® Electric Pumps. . . . . . . . . . . . . . . . . . 42

Hydraulic-Powered Grease Pumps . . . . . . . . . . . . . . 46

Airless Spray System . . . . . . . . . . . . . . . . . . . . . . 47

Pump Accessories . . . . . . . . . . . . . . . . . . . . . . . 49

System Controls . . . . . . . . . . . . . . . . . . . . . . . . 52

Numerical Index. . . . . . . . . . . . . . . . . . . . . . . . . 57

Centro-Matic® Automatic Lubrication Systems

A complete hydraulically-

powered pumping unit for

centralized lubrication of

individual machines. Usually

installed on machinery such

as coal mining and earth

moving equipment which

utilize a hydraulic pressure

system. The frequency of

the lubrication cycle can be

set manually or by mechani-

cal or automatic controls.

Hydraulic

Lincoln Centro-Matic® systems and components are made to match your application. Systems can service one ma-

chine, different zones on one machine or even several separate machines. Regardless of the application, the principle

of centralized lubrication remains the same: a central pump station automatically delivers lubricant through a single

supply line to the injectors. Each injector serves only one lubrication point and may be accurately adjusted to deliver

the precise amount of grease or oil required. Centro-Matic systems give you multiple advantages over other designs.

Systems are easy to understand, install and maintain. You realize savings right from the start because one lubricant

supply line means lower installation costs.

Centro-Matic systems dispense either grease or oil in measured quantities, unaffected by normal temperature or

viscosity changes. For large systems, Lincoln’s single-line design and powerful pumps mean injectors can be located

long distances from original reﬁnery containers or bulk lubricant tanks.

Lubricant injectors are externally adjustable without special tools so each bearing can receive the correct amount of

lubricant. No under- or over-lubrication at individual points.

Each injector incorporates an indicator pin that gives visual conﬁrmation the injector is operating correctly. When

necessary, troubleshooting is the simple process of checking indicator pins.

When injectors ﬁnally need service, the job is quick and easy. No need to remove supply line connections or disturb

adjacent injectors. Replacement can usually be done between lubrication cycles, so there’s almost no lubricant loss

or downtime.

You’re never far from a Lincoln authorized distributor. Qualiﬁed distributors offer design engineering, startup help and

training for your personnel in the use and maintenance of Centro-Matic systems. They’ll back you up with parts and

service for years after the sale.

Actuated automatically by

compressed air at various

pre-determined intervals.

An air-operated pump

delivers lubricant to the

injectors. When all injectors

have cycled, the pump

shuts

off automatically and vents

lubricant pressure. Available

with automatic, manual or

mechanical controls.

Used where compressed air

is not available, or electri-

cal operation is preferred.

Totally

enclosed motor supplies the

power requirements of the

pumping mechanism. Time

control is adjustable to

provide predetermined

frequency of lubrication.

Designed for smaller,

individual machines, manual

systems provide a low-cost,

efﬁcient method of distribut-

ing lubricant to the injectors.

Cycling a complete bank of

injectors takes only a few

seconds. In manually

operated systems, the

lubricant pump is hand-

operated and the machine

operator performs the

lubrication intervals.

Simplicity

Powerful Pumping Unit

External Adjustment

Visual Indicators

Ease of Service

Parts and Service

Air-Operated Electric Manual

Introduction

Centro-Matic® Automatic Lubrication Systems

Introduction

Each Lincoln Centro-Matic injector can be manually adjusted to discharge the precise amount of lubricant each

bearing needs. Injectors are mounted singly at each bearing, or grouped in a manifold with feedlines supplying

lubricant to the bearings. In each case, injectors are supplied with lubricant under pump pressure through a single

supply line. Two injector types are available: a top adjusting and a side adjusting. Both types can be used in the

same circuit; their selection is made on the basis of bearing lubricant requirements.

Stage 1—The discharge chamber is ﬁlled with lubricant from the previous cycle. Under pressure of incoming lubri-

cant, lubricant is directed to both sides of the measuring piston through the slide valve. The port to the bearing is

closed in this position which prevents the measuring piston from moving. The indicator stem will be at its innermost

position, having pulled away from the stop in the adjusting screw.

Stage 2—Pressure has built up and has moved the slide valve in position shown. This closes the ﬂow passage to the

upper side of the piston (larger diameter) while simultaneously opening the port to allow lubricant to ﬂow out of the

injector to the bearing. Pressure from the supply line continues to apply pressure to the lower portion of the measur-

ing piston, which causes a pressure difference across the measuring piston thus allowing it to move upward.

Stage 3—Movement of the measuring piston is shown caused by the pressure on the lower side of the measuring

piston dispensing lubricant out to the bearing. The indicator stem will move up against the stop in the adjusting screw

when all lubricant has been delivered to the bearing.

Stage 4—As the pressure in the supply line is vented down to 1,000 psi, the slide valve moves back to its rest posi-

tion. Flow of lubricant to the bearing is closed and simultaneously allows lubricant to ﬂow to the upper (larger diam-

eter) of the piston. The displacement of ﬂuid on the lower side of the measuring chamber is also allowed by the slide

valve to ﬂow to the upper side of the piston. The injector is recharged by the residual pressure in the supply line to the

upper portion of the measuring chamber.

Basic Operating Principles of Centro-Matic® Injectors

SL-V, SL-V XL

Stage 1 Stage 2 Stage 3 Stage 4

Discharge

Chamber

Measuring

Piston

Slide

Valve

Indicator

Stem

Discharge

Chamber

Measuring

Piston

Slide

Valve

Indicator

Stem

Discharge

Chamber

Measuring

Piston

Slide

Valve

Indicator

Stem

Discharge

Chamber

Measuring

Piston

Slide

Valve

Indicator

Stem

Centro-Matic® Automatic Lubrication Systems

Introduction

Injector

Piston Injector

Piston Measuring

Chamber

Discharge

Chamber

Slide

Valve

Slide

Valve

Indicator

Stem

Discharge

Chamber

Outlet

Port

Lubricant

Supply Inlet

Passage Passage

Stage 1 Stage 2 Stage 3 Stage 4

Stage 1—The injector piston is in its normal, or rest position. The discharge chamber is ﬁlled with lubricant from

the previous cycle. Under the pressure of incoming lubricant, the slide valve is about to open the passage leading

to the piston.

Stage 1—Incoming lubricant, under pressure from the

supply line, moves the injector piston forward. The pis-

ton forces a pre-charge of lubricant from the discharge

chamber through the outlet check valve to the feed line.

SL-1, -11, -41, -44

SL-32, -33, -42, -43

Stage 2—When the slide valve uncovers the passage, lubricant is admitted to the top of the piston, forcing the

piston down. The piston forces lubricant from the discharge chamber through the outlet port to the bearing.

Stage 2—When the system is vented (pressure relieved),

the piston returns to the rest position, transferring lubricant

from the measuring chamber to the discharge chamber.

Applications—When it comes to eliminating costly,

manual point-by-point lubrication, Centro-Matic systems

have proven to be the right solution for many industries

and applications. Examples include:

Stage 3—As the piston completes its stroke, it pushes the slide valve past the passage, cutting off further

admission of lubricant to the passage. Piston and slide valve remain in this position until lubricant pressure

in the supply line is vented (relieved) at the pump.

Stage 4—After pressure is relieved, the compressed spring moves the slide valve to the closed position. This

opens the port from the measuring chamber and permits the lubricant to be transferred from the top of the piston

to the discharge chamber.

• Paper Converting

• Plastic Processing

• Wood Processing

• Printing

• Packaging

• Textile

• Food & Beverage

• Metalworking

• Material Handling

Equipment

Outlet

Check

Valve

Measuring

Chamber

Discharge

Chamber

Adjusting

Nut

Indicator

Stem

Injector

Piston

Lubricant

Supply

Inlet

Lock

Nut

Stage 1 Stage 2

Centro-Matic® Automatic Lubrication Systems

Grease Injectors

Series SL-33

Notes:

1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing — 1/8" O.D. as standard.

Other outlet connectors for feed line optional.

2. Injectors with manifolds include two mounting clips and screws.

3. Injectors have Nitrile packings (200°F max. / 93°C). Check packing compatibility with synthetic lubricants.

4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with two turns at .001 cu. in./turn.

• For single-line, high-pressure central lubrication system.

• For dispensing petroleum-based lubricants with a viscosity up to NLGI No. 2 (refer to Design Guide).

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of Injectors SL-32, SL-V, SL-V XL, SL-1 and/or SL-11.

• Individual injectors can be easily removed for inspection or replacement.

• Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel

or in industries preferring stainless steel.

Series Output Operating Pressure

Min. Max. Min. Max. Typical Vent

SL-33 .001 cu. in.

.016 cc

.003 cu. in.

.049 cc

1200 psig

83 bar

3500 psig

241 bar

1500 psig

103 bar

200 psig

14 bar

Speciﬁcations:

Model Number

Outlets

Connections Dimensions

Carbon Steel Stainless Steel

(304) Manifold Inlet Injector Outlet A

in.

83309-1 83715-1 1

⅛" NPTF (F)

⅛" O.D. Tube

1⅛ 29 1⅝ 41

83309-2 83715-2 2 1⅞48 2⅜ 60

83309-3 83715-3 3 2⅝ 67 3⅛ 79

83309-4 83715-4 4 3⅜ 86 3⅞ 98

83309-5 — 5 4⅛ 105 4⅝ 117

83309-6 83715-6 6 4⅞ 124 5⅜ 137

— 83715-7 7 5⅝ 143 6⅛ 156

83900 83900-9 1 ⅛" NPTF (M) Single Injector/No Manifold

83314 83314-9 — — Single Replacement Injector

Centro-Matic® Automatic Lubrication Systems

Series SL-32

Grease Injectors

• For single-line, high-pressure central lubrication system.

• For dispensing petroleum-based lubricants with a viscosity up to NLGI No.2 (refer to Design Guide).

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of injectors SL-33, SL-V, SL-V XL, SL-1 and/or SL-11.

• Individual injectors can be easily removed for inspection or replacement.

• Available in stainless steel SAE 304, for application where environmental conditions are hazardous to carbon steel

or in industries preferring stainless steel.

Series Output Operating Pressure

Min. Max. Min. Max. Typical Vent

SL-32 .001 cu. in.

.016 cc

.008 cu. in.

.131 cc

1200 psig

83 bar

3500 psig

241 bar

1500 psig

103 bar

200 psig

14 bar

Speciﬁcations:

Notes:

1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing — 1/8" O.D. as standard.

Other outlet connectors for feed line optional.

2. Injectors with manifolds include two mounting clips and screws.

3. Injectors have Nitrile packings (200°F max. / 93°C). Check packing compatibility with synthetic lubricants.

4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with ﬁve turns at .0014 cu. in./turn.

Model Number of

Outlets

Connections Dimensions

Carbon Steel Stainless Steel

(304) Manifold Inlet Injector

Outlet

in.

83336-1 83724-1 1

¼" NPTF (F)

⅛" O.D. Tube

1¼ 32 1¾ 44

83336-2 83724-2 2 2 51 2½ 63

83336-3 83724-3 3 2¾ 70 3¼ 82

83336-4 83724-4 4 3½ 89 4 101

83338 — 1 ¼" NPTF (M) Single Injector/No Manifold

83337 83337-9 — — Single Replacement Injector

Centro-Matic® Automatic Lubrication Systems

Series SL-32HV High Venting - NEW

• For single-line, high-pressure central lubrication system.

• For dispensing petroleum-based lubricants with a viscosity up to NLGI No.2 (refer to Design Guide).

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of injectors SL-33, SL-V, SL-V XL, SL-1 and/or SL-11.

• Individual injectors can be easily removed for inspection or replacement.

Series Output Operating Pressure

Min. Max. Min. Max. Typical Vent

SL-32HV .001 cu. in.

.016 cc

.008 cu. in.

.131 cc

1200 psig

83 bar

3500 psig

241 bar

1500 psig

103 bar

400 psig

28 bar

Speciﬁcations:

Notes:

1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing — 1/8" O.D. as standard.

Other outlet connectors for feed line optional.

2. Injectors with manifolds include two mounting clips and screws.

3. Injectors have Nitrile packings (200°F max. / 93°C). Check packing compatibility with synthetic lubricants.

4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with ﬁve turns at .0014 cu. in./turn.

Model Number of

Outlets

Connections Dimensions

Carbon Steel Manifold Inlet Injector Outlet A

in.

83336HV-1 1

¼" NPTF (F)

⅛" O.D. Tube

1¼ 32 1¾ 44

83336HV-2 2 2 51 2½ 63

83336HV-3 3 2¾ 70 3¼ 82

83336HV-4 4 3½ 89 4 101

83336HV-5 5 4¼ 108 4¾ 120

83336HV-6 6 5 127 5½ 139

83336HV-7 7 5¾ 146 6¼ 158

83336HV-8 8 6½ 165 7 177

83336HV-9 9 7¼ 184 7¾ 196

83336HV-10 10 8 203 8½ 215

83338HV 1 ¼" NPTF (M) Single Injector/No Manifold

83337HV — — Single Replacement Injector

Grease Injectors

Centro-Matic® Automatic Lubrication Systems

Grease Injectors

Series SL-V

Notes:

1. Injector manifolds have 13⁄32" (10.3 mm) dia. mounting holes for 3⁄8" bolt.

2. Injectors have polyurethane seals Check compatibility with synthetic lubricants.

3. Injector rated for 180°F (80°C) max. ambient temperature, depending on lubricant used.

4. Injectors include tting for lling feedlines via alternate outlet port.

5. Output with adjustment screw hand-tightened is .015 cu. in. Maximum output is achieved with ve turns at .014 cu. in./turn.

Series Material

Output Operating Pressure Connections

Min. Max. Min. Max. Typical Vent Manifold

Inlet

Injector

Outlet

SL-V Carbon

Steel

0.015 cu. in.

0.25 cc

0.08 cu. in.

1.31 cc

1850 psig

128 bar

6000 psig

413 bar

2500 psig

172 bar

1000 psig

60 bar ⅜" NPTF (F) ⅛" NPTF (F)

Speciﬁcations:

• For single-line, high-pressure central lubrication system.

• For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2 (refer to Design Guide).

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of injectors SL-32, SL-33, SL-1, SL-V XL and/or SL-11.

• Individual injectors can be easily removed for inspection or replacement.

• Each SL-V injector includes a clear polycarbonate protective cap.

1¼"

(32mm)

13/32" (10.3mm)

Mounting

Holes

⅜" NPTF

(both ends)

⅛"

NPTF

8¾"

(222mm)

⅜"

(19mm)

2⅛"

(54mm)

1½"

(38mm)

1⅜"

(35mm)

Model Type Number of Outlets

Dimension

in.

85770-1 One Injector Manifold 1

Single Mounting Hole 2½ 63

85770-2 Two Injector Manifold 2 3 76

85770-3 Three Injector Manifold 3 1¼ 32 4¼ 108

85770-4 Four Injector Manifold 42½ 63 5½ 140

85770-5 Five Injector Manifold 5 3¾ 95 6¾ 171

85770-6 Six Injector Manifold 6 5 127 8203

85771 Replacement for manifold injectors

85772 Single injector/no manifold (⅜" NPTF(M) inlet)

Centro-Matic® Automatic Lubrication Systems

1¼"

(32mm)

13/32" (10.3mm)

Mounting Holes

⅜" NPTF

(both ends)

⅛"

NPTF

113⁄16"

(284mm)

¾"

(19mm)

2⅛"

(54mm)

1½"

(38mm) 1⅜"

(35mm)

Series Material Output Operating Pressure Connections

Min. Max. Min. Max. Typical Vent Manifold Inlet Injector Outlet

SL-V XL Carbon

Steel

0.015 cu. in.

0.25 cc

0.305 cu. in.

5.00 cc

1850 psig

128 bar

6000 psig

413 bar

2500 psig

172 bar

1000 psig

69 bar ⅜" NPTF (F) ⅛" NPTF (F)

Speciﬁcations:

Grease Injectors

Series SL-V XL

High-Output

• For single-line, high-pressure central lubrication system.

• For dispensing lubricants compatible with polyurethane seals up to NLGI No. 2 (refer to Design Guide).

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of injectors SL-32, SL-33, SL-1, SL-V and/or SL-11.

• Individual injectors can be easily removed for inspection or replacement.

• Two SL-V XL injectors are required to replace one SL-11 injector.

• Each SL-V XL injector includes a clear polycarbonate protective cap.

Spectrum Adjustment Sleeves:

Model Number

(10/bag only)

Output

in³ (cc)

Ratio from

Maximum Output

Ratio from

Minimum Output

Sleeve

Color

N/A 0.015 (0.25) 0.05 1 NA

85785-1 0.030 (0.50) 0.10 2 red

85785-2 0.045 (0.75) 0.15 3 silver

85785-3 0.060 (1.00) 0.20 4 gold

85785-4 0.075 (1.25) 0.25 5 green

85785-5 0.113 (1.88) 0.37 7.5 black

85785-6 0.150 (2.50) 0.50 10 purple

85785-7 0.188 (3.13) 0.62 12.5 blue

85785-8 0.225 (3.75) 0.75 15 orange

85785-9 0.263 (4.38) 0.87 17.5 brown

85785-10 0.300 (5.00) 1.00 20 yellow

Notes:

1. Injector manifolds have 13/32"

(10.3 mm) dia.mounting holes

for 3/8" bolt.

2. Injectors have polyurethane seals

Check compatibility with synthetic

lubricants.

3. Injector rated for 180°F (80°C) max.

ambient temperature, depending on

lubricant used.

4. Injectors include ﬁtting for ﬁlling

feedlines via alternate outlet port.

5. Output with adjustment screw

handtightened is .015 cu. in.

Maximum output is achieved with

20½ turns at .014 cu. in./turn.

Model Type Number of

Outlets

in.

85780-1 One Injector Manifold 1 Single Mounting Hole 2½ 63

85780-2 Two Injector Manifold 2 3 76

85780-3 Three Injector Manifold 3 1¼ 32 4¼ 108

85780-4 Four Injector Manifold 4 2½ 63 5½ 140

85780-5 Five Injector Manifold 5 3¾ 95 6¾ 171

85780-6 Six Injector Manifold 6 5 127 8 203

85781 Replacement for manifold injectors

85782 Single injector/no manifold (⅜" NPTF(M) inlet)

Centro-Matic® Automatic Lubrication Systems

Grease Injectors

Series SL-1

• For single-line, high-pressure central lubrication system.

• For dispensing lubricants compatible with ﬂouroelastomer packings and viscosity up to NLGI No. 2

(refer to Design Guide).

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-11.

• Individual injectors can be easily removed for inspection or replacement.

• Available in stainless steel SAE 316, for application where environmental conditions are hazardous to carbon steel or

in industries preferring stainless steel.

Notes:

1. Injector manifolds have 13/32" (10.3mm) dia.mounting holes for 3/8" bolt.

2. Injectors have ﬂouroelastomer packings. Check compatibility with synthetic lubricants.

3. Injector rated for 350°F (176°C) max. ambient temperature, depending on lubricant used.

4. Injectors include ﬁtting for ﬁlling feedlines via alternate outlet port.

5. Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with eight turns at .009 cu. in./turn.

Series Output Operating Pressure Connections

Min. Max. Min. Max. Typical Vent Manifold Inlet Injector Outlet

SL-1 .008 cu. in.

.131 cc

.080 cu. in.

1.31 cc

1850 psig

127 bar

3500 psig

241 bar

2500 psig

172 bar

600 psig

41 bar ⅜" NPTF (F) ⅛" NPTF (F)

Speciﬁcations:

* For complete assembly, you must order stainless steel manifold and corresponding quantity of Model #84776 Injectors separately.

Model Number of

Outlets

Dimensions

Carbon Steel Stainless Steel 316) A

in.

81770-1 239351* One Injector Manifold 1Single Mounting Hole 2½ 63

81770-2 239352* Two Injector Manifold 2 3 76

81770-3 239353* Three Injector Manifold 3 1¼ 32 4¼ 108

81770-4 239354* Four Injector Manifold 4 2½ 63 5½ 140

81770-5 239355* Five Injector Manifold 5 3¾ 95 6¾ 171

81770-6 — 6 5 23 8 203

81713 — Single injector/no manifold, [ ⅜" NPTF (M) inlet]

81713A 84776* Injector Replacement for manifolded injectors

Centro-Matic® Automatic Lubrication Systems

Grease Injectors

Series SL-11

Notes:

1. Injectors have ﬂouroelastomer packings. Check packing compatibility with synthetic lubricants.

2. Injector rated for 350°F (176°C) max. ambient temperature.

3. Injectors supplied with ﬁtting for ﬁlling feed line via alternate outlet port.

4. Output with adjustment screw hand-tightened is .05 cu. in. Maximum output is achieved with 11½ turns at .040 cu. in./turn.

• For single-line, high-pressure central lubrication system.

• For dispensing lubricants compatible with ﬂouroelastomer packings and viscosity up to NLGI No. 2

(refer to Design Guide).

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of injectors SL-32, SL-33, SL-V, SL-V XL and/or SL-1.

• Available only as single unit with ½" NPTF Female inlet.

Carbon Steel Number of Outlets Connections

Inlet Outlet

85497 1 ½" NPTF (F) ¼" NPTF (F)

Speciﬁcations:

Series Output Operating Pressure

Min. Max. Min. Max. Typical Vent

SL-11 .050 cu. in.

.82 cc

.500 cu. in.

8.2 cc

1000 psig

69 bar

3500 psig

241 bar

2500 psig

172 bar

800 psig

55 bar

Centro-Matic® Automatic Lubrication Systems

Oil Injectors

Series SL-42

Notes:

1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing – 1/8" O.D. as standard.

Other outlet connectors for feed line optional.

2. Injectors with manifolds include two mounting clips and screws.

3. Standard injectors have Nitrile packings (200°F/93°C max.); Heat Resistant injectors have ﬂouroelastomer packings (350°F/176°C max.,

depending on lubricant used) and black adjusting cap. Check packing compatibility with synthetic lubricants.

4. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with two turns at .001 cu. in./turn.

• For single-line central lubrication system.

• For dispensing ﬂuid or semi-ﬂuid lubricants.

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of injectors SL-43, SL-41 and/or SL-44.

• Individual injectors can be easily removed for inspection or replacement.

• Carbon steel injectors with Nitrile or ﬂouroelastomer packings.

• Injectors with ﬂouroelastomer packings are used for heat resistant applications or when lubricant to be dispensed

requires ﬂouroelastomer packings for compatibility (indicated by black adjustment caps).

Series Output Operating Pressure

Min. Max. Min. Max. Typical Vent

SL-42 .001 cu. in.

.016 cc

.003 cu. in.

.049 cc

750 psig

52 bar

1000 psig

69 bar

850 psig

59 bar

150 psig

10 bar

Speciﬁcations:

Model Number of

Outlets

Connections Dimensions

Standard Heat Resistant Manifold/

Injector Inlet

Injector

Outlet

in.

83311-1 84428-1 1

⅛" NPTF (F) ⅛" O.D.

Tube

Connection

1⅛ 29 1⅝ 41

83311-2 84428-2 2 1⅞ 48 2⅜ 60

83311-3 84428-3 3 2⅝ 67 3⅛ 79

83311-4 84428-4 4 3⅜ 86 3⅞ 98

83311-5 84428-5 5 4⅛ 105 4⅝ 117

83311-6 84428-6 6 4⅞ 124 5⅜ 137

83311-10 84428-10 10 7⅞ 200 8⅜ 213

83311-15 84428-15 15 11⅞ 295 12⅛ 308

83535 — 1 ⅛" NPTF (M) Single Injector/No Manifold

83313 84048 — — Replacement for Manifold Injectors

Centro-Matic® Automatic Lubrication Systems

Oil Injectors

Series SL-43

• For single-line central lubrication system.

• For dispensing ﬂuids or semi-ﬂuid lubricants.

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of injectors SL-42, SL-41 and/or SL-44.

• Individual injectors can be easily removed for inspection or replacement.

• Carbon steel injectors with Nitrile or ﬂouroelastomer packings.

• Injectors with ﬂouroelastomer packings are used for heat resistant applications or when lubricant to be dispensed

requires ﬂouroelastomer packings for compatibility (indicated by black adjustment caps).

Notes:

1. Injectors, except replacement injectors for manifold, include compression nut and ferrule for tubing – 1/8" O.D. as standard.

Other outlet connectors for feed line optional.

2. Injectors with manifolds include two mounting clips and screws.

3. Standard injectors have Nitrile packings (200°F/93°C max.)

4. Heat Resistant injectors have ﬂouroelastomer packings (350°F/176°C max. depending on lubricant used) and Black Adjusting Cap.

5. Check packing compatibility with synthetic lubricants.

6. Output with indicator cap hand-tightened is .001 cu. in. Maximum output is achieved with ﬁve turns at .0014 cu. in./turn.

Speciﬁcations:

Series Output Operating Pressure

Min. Max. Min. Max. Typical Vent

SL-43 .001 cu. in.

.016 cc

.008 cu. in.

.131 cc

750 psig

52 bar

1000 psig

69 bar

850 psig

59 bar

150 psig

10 bar

Model

Number of

Outlets

Connections Dimensions

Carbon Steel

Standard Heat Resistant Manifold/

Injector Inlet

Injector

Outlet

in.

83661-1 84429-1 1

¼" NPTF (F) ⅛" O.D. Tube

Connection

1¼ 32 1¾ 44

83661-2 84429-2 2 2 51 2½ 63

83661-3 84429-3 3 2¾ 70 3¼ 83

83661-4 84429-4 4 3½ 89 4 102

83660 84110 — — Replacement for Manifold Injectors

Centro-Matic® Automatic Lubrication Systems

Oil Injectors

Series SL-41

• SL-41 series injectors are designed for use in high temperature applications up to 350°F (176°C),

depending on lubricant.

• Available installed only in manifolds with ⅜" NPT female inlet.

• Injectors feature a tamper-resistant adjustment screw which does not incorporate a visual indicator.

• May be combined in a circuit of injectors SL-42, SL-43 and SL-44.

Notes:

1. Injector manifolds have 13/32" (10.3 mm) mounting holes for 3/8" bolt.

2. Output with adjustment screw hand-tightened is .008 cu. in. Maximum output is achieved with 12 turns at .006 cu. in./turn.

Series Output Operating Pressure

Min. Max. Min. Max. Typical Vent

SL-41 .008 cu. in.

.131 cc

.080 cu. in.

1.31 cc

750 psig

52 bar

1000 psig

69 bar

850 psig

59 bar

150 psig

10 bar

Speciﬁcations:

Model Number of

Outlets

Connections Dimensions

Carbon Steel Manifold/

Injector Inlet

Injector

Outlet

in.

82294-1 1

⅜" NPTF (F) ⅛" NPTF (F)

Single Hole

Mounting

Single Hole

Mounting

2½ 63

82294-2 2 3 76

82294-3 3 1¼ 32 4¼ 108

82294-4 4 2½ 63 5½ 140

82294-5 5 3¾ 95 6¾ 171

82292 Single Injector/No Manifold, [⅜" NPTF (M) Inlet]

82295 — — ⅛" NPTF (F) Replacement for Manifold Injectors

Centro-Matic® Automatic Lubrication Systems

Oil Injectors

Series SL-44

• For single-line central lubrication system.

• For dispensing ﬂuid or semi-ﬂuid lubricants.

• Output is externally adjustable.

• Indicator stem permits visual check of injector operation.

• May be combined in a circuit of injectors SL-43, SL-41 and/or SL-42.

• Individual injectors can be easily removed for inspection or replacement.

• Carbon steel injectors with ﬂouroelastomer packings.

Notes:

1. Injector manifolds have 13/32" mounting holes for 3/8" bolt.

2. Injectors have ﬂouroelastomer packings. Check packing compatibility with synthetic lubricants.

3. Injectors rated at 350°F (176°C) maximum ambient temperature, depending on lubricant used.

4. Output with adjustment screw hand-tightened is .009 cu. in. Maximum output is achieved with eight turns at .009 cu. in./turn.

Series Output Operating Pressure

Min. Max. Min. Max. Typical Vent

SL-44 .008 cu. in.

.131 cc

.080 cu. in.

1.31 cc

750 psig

52 bar

1000 psig

69 bar

850 psig

59 bar

150 psig

10 bar

Speciﬁcations:

Model Number of

Outlets

Connections Dimensions

Carbon

Steel Manifold Inlet Injector

Outlet

in.

83749-1 1

⅜" NPTF (F) ⅛" NPTF (F)

Single Hole Mounting 2½ 63

83749-2 2 3 76

83749-3 3 1¼ 32 4¼ 108

83749-4 4 2½ 63 5½ 140

83749-5 5 3¾ 95 6¾ 171

83748 1 — — Replacement for Manifold Injectors

Centro-Matic® Automatic Lubrication Systems

Speciﬁcations:

Metric Injectors

With the same proven design as our U.S. standard injectors, the new metric versions of our popular small grease and

oil injectors feature metric ports. Any surface that needs a wrench is metric. It's more convenient for customers in

most of the world, and easier to maintain because there's no need for a second set of wrenches or adapters.

• Offered for international customers.

• Metric ports connect with metric lines without adapters.

• No need for a second set of tools.

• Proven design used in the United States.

• Models for both grease and oil.

SL-32 Series SL-33, 42 Series

Model

Outlets

Connections Dimensions

Oil

SL-42

Grease

SL-33

Grease

SL-32 Inlet Outlet A

in.

85352-1 85351-1 1

⅛ BSPP(F)

6 mm

O.D. Tube

Connection

1⅛ 29 1⅝ 41

85352-2 85351-2 2 1⅞ 48 2⅜ 60

85352-3 85351-3 3 2⅝ 67 3⅛ 79

85352-4 85351-4 4 3⅜ 86 3⅞ 98

85352-5 85351-5 5 4⅛ 105 4⅝ 118

85352-6 85351-6 6 4⅞ 124 5⅜ 137

85353-1 1 1¼ 32 1¾ 44

85353-2 2 2 51 2½ 64

85353-3 3 2¾ 70 3¼ 83

85353-4 4 3½ 89 4 102

Series SL-32, 33 and 42 Metric

Centro-Matic® Automatic Lubrication Systems

Injector Accessories

Injector Connector Tube

Permits application of combined discharge of two or more Series SL-V, SL-1,

SL-41 or SL-44 injectors through one feed line. Used where bearing size is

such that multiple injector output is required. Fittings ⅛" NPT male each end.

Carbon steel construction.

Model For Injector Series Connections

81646 SL-V, SL-V XL OR SL1, SL41, SL44 ⅛" NPTF Male

274824 SL-1 to SL-V connection ⅛" NPTF Male

Injector Outlet Adapter

Converts individual injector lubricant outlet when standard ⅛" O.D. tube is

not desired. All adapters are carbon steel unless otherwise noted.

Model For Injector Series Outlet Connections

14988

SL32, SL33, SL42, SL43

⅛" NPTF Female

84200 ¼" O.D. Tube

14991 ⅛" NPTF Male

249281 4 mm Tube

249282 6 mm Tube

Manual Grease Fitting Adapter

Allows manual lubrication of the machine between normal system cycles.

Carbon steel with Nitrile seals.

Model For Injector Series Outlet Connections

84195 SL32, SL33, SL42, SL43 ⅛" O.D. Tube

84203 ¼" O.D. Tube

Injector Locking Cap

Carbon steel locking caps set injectors to ﬁxed output.

Injector Cover Caps

Injector cover caps are designed to protect the injector from dirt, harmful

liquids and fumes.

Model For Injector Series Fixed Volume Output

102781 SL32, SL43 .002 in3 / .033 cc

SL33, SL42 .003 in3 / .049 cc

Model Fits Injector

Series Covers Material Length Diameter

in. mm in. mm

273088 SL-V

Indicator

Stem

Polycarbonate 1.5 38.1 .715 (ID) 18.2

273089 SL-V XL 2.2 55.9 .715 (ID) 18.2

83272 SL1, SL44

Vinyl

1.5 38.1 .69 (ID) 17.5

83730 SL11 2.0 50.8 1.125 (ID) 28.6

68483 SL32, SL33,

SL42, SL43

Measuring

Chamber 1.25 31.2 .5 (ID) 12.7

90537 SL1, SL41, SL44 Injector

Body Aluminum 3.25 82.6 1.19 (ID) 30.2

Centro-Matic® Automatic Lubrication Systems

Injector Accessories

Closure Plugs for Injectors and Manifolds

For use in plugging lubricant outlets of injectors and manifolds.

Compression Nuts

* For plugging outlet of series SL-32, SL-33, SL-42, SL-43 injectors.

Model Style Material Thread

Size (in)

in./mm

66260 One Piece Brass

5⁄16-24 5⁄16 / 7.9 ½ / 12.7 ⅛ / 3.2

66260-9 Stainless Steel

83924 Two Piece Brass

83924-9 Stainless Steel

66713 One Piece Brass 7⁄16-24 7⁄16 / 11.1 5⁄8 / 15.9 ¼ / 6.3

Injector-Operated Air Valve

Model For Injector Series Air Inlet Air Outlet

82272 SL-1, SL-44 ⅛" NPTF(F) ⅛" NPTF(F)

Air Lubricant Spray Devices

Model Use With

Series

Air Inlet

(in)

Lubricant

Inlet (in)

Spray

Outlet Air Consumption

68421

SL1, SL44 ¼ NPTF

Female

¼ NPTF

Female

Fixed

Nozzle 3.5 CFM @40 PSI

99 l/min @2.8 bar

4.1 CFM @60 PSI

116 l/min @4.1 bar

5.2 CFM @80 PSI

147 l/min @5.5 bar

69456 Swivel

Nozzle

*68587 Bulkhead

Mount

84204 SL32, SL33,

SL42, SL43

⅛ NPTF

Female

7⁄16 – 24 Male Fixed

Nozzle Throttle Controlled

Metric Outlet Adapters

Adapts injector outlet to 4 or 6 mm tubing.

Assembly comes with one nut and one ferrule.

Conversion Kit

Model No.

Tubing

Size Material Nut Ferrule

249281 4 mm Carbon Steel 249277 249271

249282 6 mm Carbon Steel 249274 249273

Feedline Brush

Use to apply lubricant to chains and conveyors. 1⁄8" NPT(F) inlet, 1" long,

5⁄8" surface area diameter; aluminum body with nylon bristles.

Model 68874

Style 1

Style 2

* 3⁄16" (4.8 mm) maximum bulkhead thickness.

Model Material Thread Size (in) A in./mm B in./mm Style

*12698 Carbon Steel

5⁄16-24 5⁄16 / 7.9 ½/ 12.7

*12698-9 Stainless Steel

12511 Carbon Steel

⅛ PTF

7⁄16 / 11.1

12511-9

Stainless Steel

67044 ⅜ NPT 13⁄16 / 20.6

67007

¼ NPT 3⁄16 / 4.8 ⅝ / 15.9

67007-9

Centro-Matic® Automatic Lubrication Systems

FlowMaster II Pump

FlowMaster II Features

• Increases pump life and simpliﬁes pump installation, operation and service

• Common crankcase design for all FlowMaster motors (hydraulic, AC or DC

electric)

• Less susceptible to grease contamination

• Pump and reservoir combination models are level sensor and shut-off

system ready

• Culmination of years of design and performance improvements makes this

a premium-choice pump for single-line parallel lubrication systems

• Two year warranty

Continuous Innovation Increases Pump Life and

Simpliﬁes Pump Installation, Operation and Service

Crankcase Improvements

• 4-bolt hole pattern for all FlowMaster motors

• Dual bearing load support

• O-ring seals for all motors

• Wider bolt-hole pattern for easier top mounting of pump

• All FlowMaster II pumps will ﬁt existing reservoirs

• Dual support ribs for increased strength

• Inner crankcase seal allows for easy and clean motor replacements without

loss of crankcase oil

• Increased depth of pump tube and crankcase interface for added strength

• Integrated crankcase oil drain for easier oil change

Follower Improvements

• 2" (51 mm) closed foam seal resists grease by-pass

• Larger side bearing surface virtually eliminates tilting of the follower plate

• Improved vent tube seal

• Sturdy construction greatly enhances sealing properties

• Grease level-sensor ready

Reservoir Improvements

• Reservoir design incorporates 1" (25.4 mm) ﬁll and 1¼" (32 mm)

overﬂow ports

• Accommodates new 2" (51 mm) follower

• Lids are adjusted for top-mounting FlowMaster II pumps

• Lids can be easily converted to grease level system operation

• Each reservoir includes two lifting eye bolts for safety

• Rigid pressure outlet connection ﬁttings are replaced by a single ﬂexible

hose

Upper Ball Check Design

• Ball check spring has been removed from ﬂow path allowing 70% more

annular ﬂow area

• Reduces clogging problems caused by contamination from unﬁltered

grease

• Grease has a clear ﬂow path, reducing downtime and costly repairs

FlowMaster II Improvements

FlowMaster II

crankcase

Follower

Reservoir

New ball

check

Centro-Matic® Automatic Lubrication Systems

Discontinued

model

(reference only)

FlowMaster II

model

Power and gear

ratio

Size

Description

lb. kg.

85471 85728 24 V DC electric, 19:1 60 27 Reservoir and pump

85487 85723 Hydraulic 60 27 Reservoir and pump

86258 85722 Hydraulic 60 27 Reservoir and pump

85677 85726 Hydraulic 90 41 Reservoir and pump

85220 85727 Hydraulic 120 54 Reservoir and pump

85518 857241) 2) Hydraulic 60 27 Reservoir and pump

85585 85725 Hydraulic 90 41 Reservoir and pump

85473 85730 24 V DC electric, 19:1 120 54 Reservoir and pump

85472 85729 24 V DC electric, 19:1 90 41 Reservoir and pump

85482 85734 Hydraulic 400 181 Pump

85481 85732 Hydraulic 60 27 Pump

85480 85733 Hydraulic 120/90 54/41 Pump

85587 85736 24 V DC electric, 19:1 35 16 Pump

85554 85737 24 V DC electric, 19:1 60 27 Pump

85591 85739 24 V DC electric, 19:1 400 181 Pump

85483 85731 Hydraulic 35 16 Pump

85566 85738 24 V DC electric, 19:1 120/90 54/41 Pump

85484 85735 Hydraulic 60 27 Pump

85676 857421) Hydraulic 120/90 54/41 Pump

85678 857411) Hydraulic 60 27 Pump

85599 85743 115 to 230 V AC electric, 1 ph, 19:1 120/90 54/41 Pump

85598 85744 115 to 230 V AC electric, 1 ph, 19:1 400 181 Pump

85850 85745 220 to 420 V AC, 50 Hz, 3 ph, 19:1

230 to 460 V AC, 60 Hz, 3 ph, 19:1 120/90 54/41 Pump

85851 85746 220 to 420 V AC, 50 Hz, 3 ph, 191

230 to 460 V AC, 60 Hz, 3 ph, 19:1 400 181 Pump

85569 85747 24 V DC electric, 17.8:1 35 16 Pump

85552 85748 24 V DC electric, 34:1 35 16 Pump

85553 85749 24 V DC electric, 34:1 120/90 54/41 Pump.

274873 85750 24 V DC electric, 7:1 35 16 Pump

274874 85751 24 V DC electric, 7:1 35 16 Pump

276041 85752 12 V DC electric, 19:1 35 16 Pump

276360 85753 12 V DC electric, 19:1 35 16 Pump

85592 85754 12 V DC electric, 19:1 60 27 Pump

277560 85740 24 V DC electric, 19:1 55 25 Pump

FlowMaster II Pump

Electric FlowMaster II Pump

• 19:1 gear ratio results in lower current draw

• Gear sets can be changed for different ratios

• 18" (457 mm) wire motor leads with Deutsch connectors for easier

installation

• Wire leads are sheathed for protection from the elements and rub areas

Hydraulic FlowMaster II Pump

• Four-bolt motor design with dual bearing drive shaft support virtually

eliminates motor loosening

• O-ring motor-to-crankcase seal virtually eliminates oil leaks

• Same hydraulic manifold and controls as on FlowMaster I models

Model Numbers and Speciﬁcations

1 Fixed hydraulic control valves. Call Technical Service for information. 2 Developed for the fracking industry. Call Technical Serive for details.

Centro-Matic® Automatic Lubrication Systems

Reservoir Level Sensor and Overﬂow Prevention System

Lincoln’s New Design Automatically Shuts Off Grease

Fill Supply To The Reservoir

Lincoln’s advanced grease level gauge design with automatic overﬂow shut-

off option is unlike any other system in the industry.

• The system senses the position of the follower in the reservoir (i.e., grease

level) and sends the signal to a level gauge which can be mounted at the ﬁll

station.

• Grease level can be determined at all times.

• The level indicator signal can also be integrated into on-board systems.

• The system can prevent dangerous and costly overﬁlls when used with the

automatic shut-off valve system.

• The sensor and follower plate automatically signals a high pressure shut-off

valve to the reservoir before overﬁlling occurs.

• Reduces maintenance time allowing personnel to do other jobs.

Unlike other shut-off systems, the Lincoln system does not use pressurized

technology. Therefore, the reservoir is not completely welded together and,

thus, the system does not need to adhere to the governmental pressurized-

vessel regulations in some countries (Australia).

Overﬂow spillage is a common result of ground ﬁlling large grease reservoirs

located in remote or hard-to-reach areas of machines. The Lincoln automatic

shut-off system prevents this type of overﬂow avoiding safety hazards which

can result in injury and potential costly ﬁnes. As a result, it is easy to see

how this system will pay for itself. This system is completely retroﬁtable to all

FlowMaster pump and bucket combinations with a follower.

When ﬁlling the reservoir, a high-pressure shut-off valve activates when the

reservoir is full, stalling the supply pump. After the supply pump is turned off,

a pressure relief button on the control box opens to relieve supply line

pressure so it can be safely uncoupled.

Deutsch connector links the

sensor to the controller

Special follower plate

[also available in 2 in.

(50.8 mm) foam version]

Level

sensor

“Floating” magnet

detects grease

level

FlowMaster pump and reservoir with 2" (50.8 mm)

foam follower and level sensor

Centro-Matic® Automatic Lubrication Systems

Reservoir Level Sensor and Overﬂow Prevention System

Model Description

280455 Controller for level sensor only

280450 Controller for level sensor and overﬂow prevention system

283005 7 350 psi (507 bar) high-pressure shut-off valve

274524 Sensor for standard 60 lb. (27 kg) follower

277659 Sensor for 2 in. (50.8 mm) 60 lb. (27 kg) foam follower

274312 Standard 60/90 lb. (27/41 kg) follower with sensor bracket

85706 2 in. (50.8 mm) 60/90 lb. (27/41 kg) foam follower with sensor bracket

280441 Sensor-ready lid for 60/90 lb. (27/41 kg) reservoir with standard follower

277703 Sensor-ready lid for 60/90 lb. (27/41 kg) reservoir with 2 in.

(50.8 mm) foam follower

278092 Sensor for standard 90/120 lb. (41/54 kg) follower

277654 Sensor for 2 in. (50.8 mm) 90/120 lb. (41/54 kg) foam follower

278094 Standard 120 lb. (54 kg) follower with sensor bracket

278095 2 in. (50.8 mm) 120 lb. (54 kg) foam follower with sensor bracket

280442 Sensor-ready lid for 120 lb. (54 kg) reservoir with standard follower

278096 Sensor-ready lid for 120 lb. (54 kg) reservoir with 2 in.

(50.8 mm) foam follower

280414 30 ft. (10 m) controller cable

278097 Follower magnet bracket kit (for all followers)

85763 60 lb. (27 kg) 24 VDC FlowMaster II pump and bucket with sensor

85762 90 lb. (41 kg) 24 VDC FlowMaster II pump and bucket with sensor

274872 10,000 psi (689.5 bar) high-pressure gauge; ¼ in. NPT;

2½ in. (63.5 mm) face

Note: standard follower, sensor and lid must be used together. 2 in. (50.8 mm) foam follower, sensor and lid

must be used together. Do not mix.

Model 280450

Control box with grease-level gauge (24 V DC), “full” alarm light and

momentary switch for shut-off valve.

Model 283005

7,350 psi (507 bar) shut-off valve is designed to prevent overﬂow during

reservoir ﬁlling.

Model 276849

Special FlowMaster reservoir lid to accept sensor .

Model 274872

10,000 psi (689.5 bar) high-pressure gauge before shut-off valve.

Model 278097

Follower magnet bracket kit.

Model 280414

Cable assembly between sensor and controller.

Make sure ﬁll coupling is capable

of handling high pressure.

WARNING

Model 280450

Model 283005

Model 276849

Model 274872

Model 278097

Model 280414

Hydraulic Lubrication Systems

HTL Single Shot Hydraulic Lubricator Pump

for Hammers

• Delivers precise lubrication every time the hammer cycles

• Increase productivity—no work interruption

• Reduces machine repairs and replacement costs

Arms and breakers move constantly and exert enough force to demolish a building or repair

roads in a tough environment ﬁlled with grit and debris. Many OEMs recommend frequent

lubrication of that hammer to achieve optimal performance and to hold down maintenance and

repair costs. However, deadline-driven operators rarely halt work to grease the hammer, which

can lead to breakdowns that grind down productivity and inﬂate repair expenses. Lincoln’s

HTL Pumps make precise, consistent lubrication a reality. Now your operator can lubricate the

hammer without leaving the cab. The pumps attach directly to the hammer, and your operator,

with the push of a pedal, automatically sends a single shot of hydraulic ﬂuid to the pump. Then

the pump gives one shot of grease to lubricate the bearing points. When the operator’s foot

comes off the pedal, pressure releases the spring in the pump so it’s ready to lubricate again.

Applications: construction OEMs, hydraulic hammer retroﬁts, demolition attachments and

medium to larger breakers/hammers

• Withstands vibrations of an operating hammer

• Travels with hammer, perfect for rental equipment or hammers used on various machines

• Hydraulic power supply

• Pedal-actuated

• Attached grease ﬁtting allows for manual ﬁlling and fast priming of pump

• Uses standard 14.5-ounce grease cartridges and handles chisel paste

• To adjust output, metering plugs are available (0.006 in³ [0.1cm³] to 0.031 in³ [0.5cm³])

• Convenient visual low level indicator

Specications

*Optional metering plugs are available for different output volume. See Pump Output Adjustment chart below.

Hammer Pumps

Pump Output Adjustment Metering Plug

Model No. Output per Stroke

271924 0.006 in³ / 0.1 cm³

271925 0.012 in³ / 0.2 cm³

271926 *0.018 in³ / 0.3 cm³

271927 0.031 in³ / 0.5 cm³ *Note: Standard plug included with pump

Operating Temperature: -10°F to +180°F / -23°C to +80°C

Hydraulic Port: SAE #4 ( 7/16-20 UNF) O-ring

Pump Outlet: SAE #4 ( 7/16-20 UNF) O-ring

Weight (Empty): 16.3 lbs. / 7.4 kg

Weight (Full): 17.3 lbs. / 7.8 kg

Model No. 85429 85425 85424 85414

Hydraulic Ratio at Max.

Output and Pressure* 2.4:1 0.7:1

Max. Hydraulic

Operating Pressure:

2600 psig

(112 bar) 5000 psig (345 bar)

Max. Recharge (or Vent)

Pressure:

400 psig

(28 bar)

1100 psig

(75 bar)

600 psig

(41 bar)

1100 psig

(75 bar)

Max. Lube Outlet

Pressure: 6500 psig (450 bar)

Output per Stroke (Std.

Metering Plug)

.018 cu. in. (0.3 cc) Std.

.006 - .031 cu. in. (0.1 - .5 cc) Optional*

.031 cu. in. (0.5 cc) Std.

.006 - .031 cu. in.

(0.1 - .5 cc) Optional*

Grease Reservoir

Volume: 14.5 oz.

Hydraulic Lubrication Systems

HTL 201US Continuous Hydraulic Lubricator Pump

for Hammers

• Delivers precise lubrication every time the hammer operates

• Increase productivity—no work interruption

• Reduces machine repairs and replacement costs

Arms and breakers move constantly and exert enough force to demolish a building or repair

roads in a tough environment ﬁlled with grit and debris. Many OEMs recommend constant

lubrication of that hammer to achieve optimal performance and to hold down maintenance and

repair costs. However, deadline-driven operators rarely halt work to grease the hammer, which

can lead to breakdowns that grind down productivity and inﬂate repair expenses. Lincoln’s

HTL Pumps make precise, consistent lubrication a reality. Now your operator can lubricate the

hammer without leaving the cab. The pumps attach directly to the hammer, and your operator,

with the push of a pedal, automatically sends a continuous ﬂow of hydraulic ﬂuid to the pump.

Then the pump gives continuous grease to lubricate the bearing points. When the operator’s

foot comes off the pedal, pressure releases the ﬂow in the pump so it’s ready to lubricate

again.

Applications: construction OEMs, hydraulic hammer retroﬁts, demolition attachments and

medium to larger breakers/hammers

• Mounts directly on the hydraulic device and lubricates continuously while in operation

• Continuous lubrication with small quantities during the working cycle

• Compact design

• Independent – the pump stays with the tool that requires lubrication even if the carrier unit is

exchanged.

• 14.5 oz. cartridge can be replaced or the reservoir bulk ﬁlled with the special built-in adapter

making it ideal for OEMs or rental ﬂeets that specify a speciﬁc grease or chisel paste on their

equipment.

• Low lubricant level indicator lets operator know when to ﬁll or change cartridges.

Specications

Hammer Pumps

Operating Temperature: -13°F to +140°F / -25°C to +60°C

Hydraulic Port: G ¼ BSPP O-ring

Pump Outlet: G ¼ BSPP O-ring

Model No. 85446

Max. Hydraulic Operating Pressure: 1160 to 3045 psi (80 to 210 bar)

Max. Lube Outlet Pressure: 1740 to 3916 psi (120 to 270 bar)

Output per Stroke 0.13 in3 / stroke (0.22 cm3 / stroke) to 0.41 in3 / stroke

(6.7 cm3 / stroke)

Grease Reservoir Volume: 14.5 oz.

rev version

Centro-Matic® Automatic Lubrication Systems

P653S Electric Pump

P653S Pump Features

• Integrated pump supplies lubricant to a single line parallel lubrication system

• Pumps low- and high-viscosity greases including industry standard NLGI grade

2 grease

• Easily interfaces with telematics technology in today’s heavy equipment

• Operating temperature range from -40°F to +158°F (-40°C to +70°C) VDC or 32°F

to 122°F (0°C to 50°C) VAC*

• Neutral switch allows mobile equipment to remain idling with pump power on but the

timer is deactivated – allowing manual lubrication functionality.

• All pumps include low-level and system fault alarms

Beneﬁts

• Integration of major system components reduces labor and overall costs

• Simpliﬁes lubrication system design

• Installation time is reduced due to the ”plug-and-play” pump design. Simply mount

the pump, connect power and the supply lines and the system is ready for operation.

• Neutral switch ensures lubrication only when the machine is operating – eliminating

wasted grease.

* Appropriate greases apply

INTERNAL COMPONENTS

• Telematics Signaling

Capabilities for Low

Level and System

Fault Detection

• Pressure Switch or

Transducer

Reservoir Available in

Four Sizes –

4, 8, 15 and 20 Liters

Means Versatility in

Scheduling Reﬁlling

Service Intervals

Reservoir Reﬁll Port

Programmable

Controller

Available With or

Without Follower

(shown with

follower)

High-Volume

Output

Vent Valve

120/220 AC or

24-DC Pump

Taking Lincoln’s Pump Performance and Dependability In A Totally New Direction

The fully integrated P653S pump is an example of Lincoln’s commitment to providing innovative, cost-effective

solutions through industry-leading advances in technology. This next-generation, lower-cost pump package can be

ﬁtted with one of four reservoir sizes and easily adapts to many applications.

15 AND 20 LITER

RESERVOIR KITS

Convert any 4 or 8 liter

P653S or P603S pump

without a follower to a 15

or 20 liter reservoir with the

following kits:

Reservoir size: Part No.

15L 276764

20L 276765

Centro-Matic® Automatic Lubrication Systems

P653S Electric Pump for Grease Applications

P653S Pump Speciﬁcations for Grease Applications

Electrical data DC Pumps AC Pumps

Incoming voltage: 19 to 31 VDC 100 to 240 VAC

Maximum current: 10 amps 1.7 amps

Frequency: — 47 to 63 hz

Operating temperature: -40 to +158°F (-40 to +70°C) 32 to 122°F (0 to 50°C)

Minimum pause time: 4 min.

Maximum pause time: 59 hrs. 59 min.

Pause time increments: 1 hr. or 1 min.

Maximum pumping time: 12 min.

Common Electrical Data for DC and AC Pumps

Pump P653S

Operating pressure with:

Pressure switch (ﬁxed): 3,500 psig (240 bar)

Pressure transducer (adj.): 1,400 to 4,600 psig (96 to 317 bar)

End of line pressure switch and transducer

setting (not adj.): 2,500 psig (172 bar)

Number of outlets: 1

Output: 1.5 in3/min (24.6 cm3/min)

Pump Elements

Piston diameter: 7 mm

Number of pumping elements

(connected together): 3

Protection 1P 6K9K

Centro-Matic® Automatic Lubrication Systems

Available Pump Models

NOTE: All models are designed for grease and include stirring paddle and low-level detection. Pumps include remote signaling cable, relief valve,

electrical connectors and external pressure switch or transducer (as indicated for each model).

Model

No. 24

VDC

120/230

VAC

50/60 Hz

Reservoir

Size (L) Follower

Plate

Internal

Pressure

Switch

Internal

Pressure

Transducer

Internal & End-

of-Line Pressure

Switch

Internal & End-

of-Line Pressure

Transducer

80086 X 4 X

80087 X 4 X

80105 X 4 X

80106 X 4 X

80076 X 4 X X

80077 X 4 X X

80109 X 4 X X

80110 X 4 X X

80090 X 8 X

80091 X 8 X

80107 X 8 X

80108 X 8 X

80080 X 8 X X

80081 X 8 X X

80111 X 8 X X

80112 X 8 X X

80120 X 20 X

80121 X 15 X X

80122 X 15 X

80129* X 8 X

80130* X 4 X

80131* X 8 X

80082 X 4 X

80083 X 4 X

80084 X 4 X

80085 X 4 X

80072 X 4 X X

80073 X 4 X X

80074 X 4 X X

80075 X 4 X X

80088 X 8 X

80089 X 8 X

80078 X 8 X X

80079 X 8 X X

80134 X 15 X

80135 X 20 X X

P653S Electric Pump for Grease Applications

P653S Pumps for Oil Applications

Two new pumps made especially for oil applications. These pumps operate the same as the grease version with low-

level detect, internal pressure transducer and ﬁltered ﬁlling through the lid. Available in two reservoir sizes.

Model 120/230 AC Reservoir Size Internal Transducer

80127 X 4 liter X

80128 X 8 liter X

* PLC pause time controlled

Centro-Matic® Automatic Lubrication Systems

P603S Pump

Available Pump Models

P603S Pump Features

Reliable Operation in Harsh Environments

• Wind turbines – especially offshore

• Construction and mining

• Commercial vehicles

• Compact and medium-sized machines

and industrial applications

• Robust and easy system layout

• Simple maintenance – easy to expand

• SE1 suction elements for used lubricant

• Increased proﬁts and productivity

• Improved operating times; less costly

downtime resulting from improper

lubrication

• Lower costs for repairs and spare parts

Model No. Description Power Size Follower Internal Transducer

645-41064-3 P603S- 4XLF -3Z7-AC-2A7.16-S13-SE AC 4L X X

645-41062-3 P603S- 8XLF -3Z7-AC-2A7.16-S13-SE AC 8L X X

645-41110-2 P603S- 8XLBO-3Z7-AC-3A7.16-S12-SE AC 8L X

645-41062-4 P603S- 8XLBO-3Z7-AC-3A7.16-S19-SE AC 8L X

645-41073-5 P603S-15XLF -3Z7-AC-2A7.16-S13-SE AC 15L X X

645-41064-8 P603S- 4XLF1-3Z7-12-1A7.16-S01-SE 12 DC 4L X (Bayonett) X

645-41064-7 P603S- 4XNBO-3Z7-12-2A7.16-S01-SE 12 DC 4L X

645-41110-3 P603S- 8XLF1-3Z7-12-1A7.16-S01-SE 12 DC 8L X (Bayonett) X

645-41062-9 P603S- 8XLF -3Z7-24-1A7.16-S01-SE 24 DC 8L X X

645-41064-4 P603S- 4XLBO-3Z7-24-1A7.16-S17-SE 24 DC 4L X

645-41064-6 P603S- 4XLF -3Z7-24-1A7.16-S13-SE 24 DC 4L X X

645-41064-2 P603S- 4XNBO-3Z7-24-1A7.16-S01-SE 24 DC 4L X

645-41062-8 P603S- 8XLBO-3Z7-24-2A7.16-S19-SE 24 DC 8L X

645-41062-9 P603S- 8XLF -3Z7-24-1A7.16-S01-SE 24 DC 8L X X

645-41062-7 P603S- 8XLF -3Z7-24-1A7.16-S03-SE 24 DC 8L X X

645-41119-1 P603S-10XLF -3Z7-24-1A7.16-S13-SE 24 DC 10L X X

645-41175-5 P603S-4XNBO -3Z7-12-1A7.16-S22-SE 12 DC 4L X

645-41119-2 P603S-10XLF -3Z7-AC-2A1.01-S13-SE AC 10L X X

Incoming metering 0.05 - 0.4 cm³/stroke

Pump Output 12 cm³

Supply voltage 12 VDC, 24 VDC, 100-240 VAC

Programmable controller Yes

Reservoir capacity/liter 4, 8, 10, 15, 20

Integrated pressure sensor and vent Yes

Visual low-level Yes

Centro-Matic® Automatic Lubrication Systems

P603S Pump

Pump Speciﬁcations

Pump and Accessories – All-In-One

The pump with integrated controller is easy to install. The all-in-one design of the pump

includes the programmable controller, a pressure switch/transducer and a vent valve.

Simple System Design – Easy to Expand

The single-line system’s design and layout is uncomplicated, making it easy to install

and operate. A single mainline reduces material and installation costs.

Easy to Service

It is quick and easy to exchange out an injector. The mainline or neighboring injectors

do not have to be removed. The exchange can be performed between lubrication cycles

so that there is no wasted lubricant or excessive costly downtime.

Additional Pressure Switch

An additional pressure switch at the end of larger systems can be used for added

pressure control to ensure correct lubrication.

Special Features for Wind Turbine Applications – Also for Off-Shore Systems

Lincoln single-line systems completely vent during the pause interval. As a result, they

are suitable for fast separating lubricants.

For rotating operation in wind turbines, the reservoir is equipped with a follower plate

and stirring paddle – which also facilitates the usage of fast separating lubricants. For

stationary operation a stirring and ﬁxed paddle is sufﬁcient.

P603S 12/24 VDC P603S / AC

Pump Output 0.73 cu.in/min (12cm³/min) 0.73 cu.in/min (12cm³/min)

Maximum Working Pressure 4,350 psig (300 bar) / 3,480 psig (240bar) 4,350 psig (300 bar) / 3,480 psig

(240bar)

Maximum Current Draw 2 Amps 2 Amps

Steering Paddle And Follower Yes Yes

Reservoir Size, Liter 4, 8, 10, 15 and 20 4, 8, 10, 15 and 20

Number Of Pumping Elements 3, (7 mm diameter) 3, (7 mm diameter)

RPM, Paddle (76˚F) 18 18

Pressure Switch At Pump Yes Yes

Transducer At Pump Yes Yes

Pressure Switch/ End Of Line Yes Yes

Transducer/ End Of Line Yes Yes

PCB Yes Yes

Separate Alarms, LL/Proxy Switch No No

24.0 VDC Input Yes Yes

Switching Power Supply No Yes

Connectors Bayonet Style Bayonet Style + Square Type (AC)

Data Logger No No

Remotely Change Lube Frequency Yes Yes

Count Control Yes Yes

Ignition & Neutral Switch Yes Yes

Acknowledging Fault At Pump/External At Pump/External

Manually Lub Switch, External Yes Yes

Pump On LED, External Yes Yes

Protection IP 6K9K IP 6K9K

Temperature -40°C / +70°C -40°C / +70°C

Centro-Matic® Automatic Lubrication Systems

Manual Grease Pumps

Manual pump has metal reservoir and spring-loaded follower. Indicator pin in pump

base shows when 2500 psi system operating pressure has been achieved.

Translucent reservoir with spring-loaded follower. Indicator pin in pump base

shows when 2500 psi system operating pressure has been achieved. Reﬁll through

included ﬁtting using Model 81834 ﬁller pump or other manual pump equipped with

Model 645006 coupler.

Once you have determined your total lubricant requirements, your greatest line length and compensated for line expansion, you’re

ready to determine the pump you need.

If your overall requirements are less than 2.4 cu. in. for oil or 2.15 cu. in. for grease, you can select a single stroke pump. Should

your requirements demand more capacity, a reciprocating pump will ﬁll the need.

Your Lincoln representative will suggest the best pump for you based on your application. Look over the following pages of pump

selection options and feel free to ask questions.

Model: 83817

Output/Stroke: .100 cu. in. / 1.6 cc

Reservoir Capacity: 1 lb. 30 cu. in. / .45 kg 492 cc

Lube Outlet: ⅛" NPTF (F)

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max. 3500 psig / 241 bar

Dimensions (HxWxL): in. 15¼" x 5" x 5⅝"

mm 387 x 127 x 141 mm

Filling Method: 14.6 oz. Grease Cartridge/Bulk Fill

Model 83817 Economy Grease Pump

Model: 1810

Output/Stroke: .160 cu. in. / 2.6 cc

Reservoir Capacity: 5 lb. 150 cu. in./ 2.27 kg 2458.50 cc

Lube Outlet: ¼" NPTF (F)

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max. 3500 psig / 241 bar

Dimensions (HxWxL): in. 16¼" x 7⅛ "x 7¾"

mm 413 x 181 x 197 mm

Filling Method: 81834 Filler Pump

Model 1810 Grease Pump

Centro-Matic® Automatic Lubrication Systems

Air-Operated (Single Stroke) Grease Pumps

Timer and Controller Speciﬁcations

Time

Off

Time

Alarm

Contacts

Operating

Temperature

10 sec

or 30 sec

1/2 to 30 min

or 30 min to 30 hrs

8 amps

@ 250 VAC

-10°F to 150°F

-23°C to 65°C

Centro-Matic® Integrated Pumps

All models are air-operated, positive displacement pumps delivering a maximum volume by means of a single stroke

of the pump (volumes listed below). Solenoid air valves and adjustable solid-state time controls are integrated into

the pump body. All pumps are designed to deliver grease to single-line injectors and include a special high-volume

reﬁll ﬁtting. Acrylic reservoirs are available in several sizes. Integrated controls feature LED indicators for “Power On”,

“Pump On” and “Alarm,” along with a membrane-type, “Manual Lube” switch.

Model 85434

Same as Model 85434 except 240 VAC.

Same as Model 85434 except with a Ratio of 25:1 and Maximum Output of

2.15 in³ (35.2 cm³).

Model 85442

Model 85444

Same as Model 85444 except 240 VAC.

Ratio: 31:1

Power: 120 VAC

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max. 3500 psig / 240 bar

Maximum Output: 1.4 in³ / 18.7 cm³

Reservoir Capacity: 4.5 lbs. / 1.8 kg

Dimensions (LxWxH): 24.70" x 6.52" x 18.11" / 627 x 166 x 460 mm

Ratio: 20:1

Power: 120 VAC

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max. 3500 psig / 240 bar

Maximum Output: 0.45 in³ / 7.4 cm³

Reservoir Capacity: 1 lb. / 0.450 kg

Dimensions (LxWxH): 5.25" x 7.24" x 12.02" / 133 x 184 x 305 mm

Ratio: 20:1

Power: 120 VAC

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max. 3500 psig / 240 bar

Maximum Output: 0.45 in³ / 7.4 cm³

Reservoir Capacity: 4 lbs. / 1.8 kg

Dimensions (LxWxH): 5.25" x 7.24" x 20.75" / 133 x 184 x 527 mm

Model 85434 Integrated Grease Pump

Model 85435 Integrated Grease Pump

Model 85436 Integrated Grease Pump

Model 85442 Integrated Grease Pump

Model 85444 Integrated Grease Pump

Model 85445 Integrated Grease Pump

Centro-Matic® Automatic Lubrication Systems

Air-Operated (Single Stroke) Grease Pumps

Model 83668

Same as Model 82886 except includes larger reservoir.

Model 82653 Bare Pump

Pump uses air for forward and return stroke but dispenses lubricant on forward

stroke only. Return stroke vents lubricant pressure through included check/vent

valve. Translucent reservoir has spring-loaded follower. Reﬁll through included ﬁller

ﬁtting using Model 81834 or other manual pump equipped with Model 645006

coupler.

Model 83834 High Volume Bare Pump

Same as Model 82653 except 25:1 ratio, 2.15 cu. in (35.2 cc) maximum output.

Model 82655 Pump with Controls

Same as Model 82653 except includes Model 84501 solid state timer and

350244 four way electric solenoid valve.

Model 83800 High Volume Pump with Controls

Same as Model 83834 except includes Model 84501 solid state timer and

350244 four way electric solenoid valve.

Model 83668

Model 82653

Timer Speciﬁcations

Cycle Time On Time Power

Requirements

Ambient Operating

Temp. Range

Min Max Min Max

20 Sec. 24 Hr. 10 Sec. 1 Min.

24 Sec.

120 VAC, 60 hz

110 VAC, 50 hz

10°F to +150°F

-23°C +65°C

Note:

Refer to System Controls section for detailed timer and solenoid operated air valve

speciﬁcations.

Model 82886 Pump

Pump discharges lubricant on air-powered forward stroke and vents on

springpowered return stroke through built-in check/vent valve. Reservoir is

translucent with spring-loaded follower. Includes ﬁller ﬁtting for reﬁlling reservoir

with Model 81834 or other manual pump equipped with Model 645006 coupler.

Model 82886

Note:

Air consumption @ 100 psi is .15 CFM per stroke.

Model Lubricant/

Air Ratio

Max.

Output

Reservoir

Capacity

Reservoir

Temp.

Range

Air Inlet Lube

Outlet

Lubricant Oper.

Pressure Dimensions

HxWxL

Air Valve

Required

Min. Max.

82886

20:1 .45 in³

7.4 cm³

1 lb/.45 kg

30 in³/492 cm³

0°F to 150°F

-18°C to

65°C

¼"

NPTF(F)

¼"

NPTF(F)

1200

psig /

82 bar

3500

psig /

240 bar

10⅜" x 5¼" x 6"

263 x 133 x 152 mm 3-way

83668

4 lb/1.81 kg

120 in³

1967 cm³

18½" x 5¼" x 6"

470 x 133 x 152 mm

82653 31:1 1.4 in³

22.9 cm³ 18½" x 5¾" x 21"

470 x 146 x 533 mm 4-way

82655

83834 25:1 2.15 in³

35.2 cm³

83800

Centro-Matic® Automatic Lubrication Systems

Air–Operated (Reciprocating) Grease Pumps

Model 83599

Same as Model 83167 except includes base mounting kit and metal reservoir

with indicator rod for visual check of grease level. Reservoir includes spring-

loaded follower.

Notes: 1. Pump requires 3-way air valve. 2. Air consumption @ 100 psi is .15 CFM per cycle

Model 83167

Includes transparent reservoir, spring-loaded follower, vent valve assembly and

ﬁller ﬁtting for reﬁlling of reservoir with 81834 ﬁller pump or other manual pump

equipped with Model 645006 coupler.

Notes: 1. Pump requires 3-way air valve. 2. Air consumption @ 100 psi is .15 CFM per cycle

Model: 83167

Lubricant/Air Ratio: 40:1

Output/Min @ 100 PSIG Air: 12 cu. in. 197 cc

Reservoir Capacity: 12 lb. / 5.44 kg / 360 cu. in. / 5900 cc

Air Inlet: ⅛" NPTF (F)

Lube Outlet: ¾" NPTF (F)

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max 3500 psig / 241 bar

Dimensions (HxWxL): 22½" x 9" x 16¼" / 572 x 229 x 413 mm

Filling Method: 81834 Filler Pump

Reservoir: Translucent Acrylic

Model: 83599

Lubricant/Air Ratio: 40:1

Output/Min @ 100 PSIG Air: 12 cu. in. / 197 cc

Reservoir Capacity: 12 lb. / 5.44 kg 360 cu. in. / 5900 cc

Air Inlet: ¼" NPTF (F)

Lube Outlet: ¾" NPTF (F)

Typical System

Operating Pressure:

Min. 1200 psig 82 bar

Max. 3500 psig 241 bar

Dimensions (HxWxL): 24⅜" x 9" x 183/16" / 619 x 229 x 462 mm

Filling Method: 81834 Filler Pump

Reservoir: Aluminum

Centro-Matic® Automatic Lubrication Systems

Model 282288

Same speciﬁcations as Model 1823 but does not include elevator or controller.

Air–Operated (Reciprocating) Grease Pumps

Model 1827 Heavy-Duty Unit

Consists of PowerMaster pump, vent valve assembly with air and lubricant

connecting hoses, drum cover and control panel.

Model 1828

Same as Model 1827 except includes Model 2008 pump, 85218 vent valve and

Model 84034 drum cover sized for U.S. standard 120 lb. reﬁnery drum. Includes

85209 controller.

Model 1829

Same as Model 1827 except includes Model 2010 pump (50:1 ratio, 231 cu.in./

min. (3785 cc) delivery at 100 psig air). Fits U.S. standard 400 lb. reﬁnery drum.

Includes 85209 controller and 85215 vent valve.

Model 1823

Includes 2½" air motor driven pump, vent valve assembly, pump elevator,

connecting lubricant and air hoses, and control panel.

Notes: 1. Air consumption @ 100 psi is .42 CFM per cycle.

2. Model 83371 follower plate is available as an optional accessory.

Model: 1823

Lubricant/Air Ratio: 50:1

Output/Min @ 100 PSIG Air: 30 cu. in. / 492 cc

Drum Size: U.S. standard 120 lb. reﬁnery drum

Air Inlet: ⅜" NPTF (F)

Lube Outlet: ¾" NPTF (F)

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max. 3500 psig / 241 bar

Components included:

Pump & Vent Assembly

Controller

Pump Elevator

282288

85209

83447

Controller Electrical

Requirements: 120V, 60 Hz., 110 V, 50hz

Model: 1827

Lubricant/Air Ratio: 75:1

Output/Min @ 100 PSIG Air: 161 cu. in. / 2638 cc

Drum Size: U.S. standard 400 lb. reﬁnery drum

Air Inlet: ⅜" NPTF (F)

Lube Outlet: ⅜" NPTF (F)

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max. 3500 psig / 241 bar

Components included:

Basic Pump

Vent Valve

Controller

Drum Cover

2004

85215

85209

81675

Centro-Matic® Automatic Lubrication Systems

Model 1849

Fully automatic assembly including pump, 220/440 volt motor, translucent reservoir with

spring-loaded follower, 4000 psi (276 bar) safety unloader, adjustable pressure switch and

time control. Time control is adjustable for lubrication cycle frequency of 5, 10, 15, 20, 30 or

60 min. Solid state time delay relay (35 sec. to 240 sec.) included for connection of audible or

visual alarm to signal lubrication failure due to empty reservoir or broken supply line.

Electric Grease Pumps / Manually Operated Oil Pump

Model 1835

Same as Model 1849 except has 115 VAC, 60 Hz motor and controller.

Model 1833

Similar to Model 1849 except: 24 VDC pump motor and controller; metal reservoir with

visual level indicator rod; 2.5, 5, 10, 20, 40 and 80 minute cycle frequency adjustment; 60

second ﬁxed on time and alarm relay features. Incorporates pressure switch factory set at

2500 psi (172 bar).

Model 1812

* See Model 85520 in Systems Control section for controller speciﬁcations.

Notes:

1. Controller has provision for remote manual lube button and remote lube failure alarm.

2. Enclosure is designed to meet NEMA 3S and 12 speciﬁcations.

Model: 1849*

Output Min: 18 cu. in. / 295 cc

Reservoir Capacity: 12 lb. / 5.44 kg / 360 cu. in. / 5900 cc

Lube Outlet: ¼" NPTF (F)

Electrical

Speciﬁcations:

Pump Motor 220/440 VAC, 60 Hz, 3 ph

Controller 115 VAC, 60 Hz

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max. 3500 psig / 241 bar

Dimensions (HxWxL): 25⅜" x 13" x 1913⁄16" / 645 x 330 x 503 mm

Reservoir Fill Method: 81834 Filler Pump or Manual Pump and

645006 Coupler

Model: 1833

Output/Min: 18 cu. in. / 295 cc

Reservoir Capacity: 12 lb. / 5.44 kg / 360 cu. in. / 5900 cc

Lube Outlet: ¼" NPTF (F)

Electrical

Speciﬁcations:

Pump Motor ¼ HP, 24 VD, 10 AMP

Controller 24 VDC, 5 watts

Typical System

Operating Pressure:

Min. 1200 psig / 82 bar

Max. 3500 psig / 241 bar

Dimensions (HxWxL): 34¼" x 11½"x 21¾" / 870 x 292 x 552 mm

Reservoir Fill Method: 81834 Filler Pump or Manual Pump with

645006 Coupler

Model: 1812

Output/Stroke: .160 cu. in. / 2.6 cc

Reservoir Capacity: 4½ pint / 130 cu. in.

2.13 liter / 2130 cc

Lube Outlet: ¼" NPTF (F)

Typical System

Operating Pressure:

Min. 750 psig / 52 bar

Max. 1000 psig / 69 bar

Dimensions (HxWxL): 16¾" x 7⅛"x 7¾" / 425 x 181 x 197 mm

Manually Operated Oil

Pump has translucent reservoir with ﬁller cap and strainer. Pump base has built-in check/

vent valve and an indicator pin to show when system pressure is achieved.

Model 201849

Same as Model 1849 except has 7 lb. reservoir capacity.

Centro-Matic® Automatic Lubrication Systems

Air–Operated (Single Stroke) Oil Pumps

Centro-Matic® Integrated Pumps

All models are air-operated, positive displacement pumps delivering a maximum volume by means of a single stroke of

the pump (volumes listed below). Solenoid air valves and adjustable solid-state time controls are integrated into the pump

body. All pumps are designed to deliver ﬂuid lubricants to single-line injectors and are ﬁlled via a spring-loaded ﬁller cap and

internal ﬁlter. Acrylic reservoirs are available in several sizes. Pump Models 85432 and 85433 do not include a reservoir,and

are designed for remote or bulk-ﬁll oil applications (80 psi/5.4 bar maximum head pressure). Integrated controls feature LED

indicators for “Power On”, “Pump On” and “Alarm,” along with a membrane-type, “Manual Lube” switch.

Model 85430 Integrated Fluid Pump

Model 85430

Model 85431 Integrated Fluid Pump

Same as Model 85430 except 240 VAC.

Model 85432 Integrated Fluid Pump

Same as Model 85430 except without reservoir.

Model 85432

Model 85433 Integrated Fluid Pump

Same as Model 85432 except 240 VAC.

Model 85438 Integrated Fluid Pump

Model 85438

Model 85440 Integrated Fluid Pump

Ratio: 20:1

Power: 120 VAC

Typical System Operating

Pressure:

Min. 750 psig / 52 bar

Max. 1000 psig / 69 bar

Maximum Output: 0.45 in³ / 7.4 cm³

Reservoir Capacity: 4.25 pints / 2.0 liters

Dimensions (LxWxH): 5.25" x 7.24" x 20.75" / 133 x 184 x 527 mm

Model 85440

Model 85441 Integrated Fluid Pump

Same as Model 85440 except 240 VAC.

Timer and Controller Speciﬁcations

Time

Off

Time

Alarm

Contacts

Operating

Temperature

10 sec

or 30 sec

1/2 to 30 min

or 30 min to 30 hrs

8 amps

@ 250 VAC

-10°F to 150°F

-23°C to 65°C

Ratio: 20:1

Power: 120 VAC

Typical System

Operating Pressure:

Min. 750 psig / 52 bar

Max. 1000 psig / 69 bar

Maximum Output: 2.4 in³ / 39.3 cm³

Reservoir Capacity: 4.5 pints / 2.1 liters

Dimensions (LxWxH): 24.70" x 6.52" x 18.11" / 627 x 166 x 460 mm

Ratio: 20:1

Power: 120 VAC

Typical System

Operating Pressure:

Min. 750 psig / 52 bar

Max. 1000 psig / 69 bar

Maximum Output: 0.45 in³ / 7.4 cm³

Reservoir Capacity: 1.25 pints / 0.6 liters

Dimensions (LxWxH): 5.25" x 7.24" x 12.02" / 133 x 184 x 305 mm

Centro-Matic® Automatic Lubrication Systems

Air–Operated (Single Stroke) Oil Pumps

Model 82885

Pump discharges lubricant on air-powered forward stroke and vents on spring-

powered return stroke through built-in check/vent valve. Translucent reservoir

is reﬁlled through ﬁller cap with strainer.

Model 82885

Model 83667

Same as Model 82885 except includes larger reservoir.

Model 83667

Model 82570

High-volume pump discharges lubricant on air-powered forward stroke and vents

through included check/vent valve on air-powered return stroke. Translucent

reservoir is reﬁlled through ﬁller cap with strainer.

Model 82573

Air-operated, single stroke oil pump and timer assembly. Same as Model 82570

except includes Model 84501 solid state timer and 350244 four-way electrical

solenoid valve. Power requirements: 120 VAC, 60 Hz; 110 VAC, 50 Hz.

Model 82676

Same as Model 82570 except for use with external oil supply through ½" NPT(F) oil

inlet (maximum head pressure 80 psi (5.5 bar)).

Model 82676

** Air consumption @ 100 psi is .15 CFM per stroke.

Check compatibility when using synthetic oils.

Timer Speciﬁcations for Model 82573 Only

Note:

Refer to System Controls section for detailed timer and solenoid-operated air valve speciﬁcations.

Model Metric

Equiv.

Lubricant/

Air Ratio

Max.

Output

Reservoir

Capacity

Air

Inlet

Lube

Outlet

Lubricant Oper.

Press. Dimensions

HxWxL

Air Valve

Required

Min. Max

82885 85391

20:1

.45 in³

7.4 cm³

1¼ pint / .6 liter

36 in³ / 600cm³

¼"

NPTF(F)

¼"

NPTF(F)

750 psig

52 bar

1000

psig

69 bar

10⅜" x 5¼" x 6"

263 x 133 x 152 mm 3-way

83667

4½ pint / 2 liter

123 in³ / 2000 cm³

18½" x 5½" x 6"

470 x 140 x 152mm

82570

2.4 in³

39.3 cm³

17¾" x 5¾" x 18¼"

451 x 146 x 464 mm

4-way82573 17¾" x 5¾" x 18¼"

451 x 146 x 464 mm

82676 Remote 18½" x 5¾" x 21"

470 x 146 x 533 mm

Cycle Time On Time

Min. Max Min. Max.

20 Sec. 1000 psig / 69 bar 750 psig / 52 bar 1 Min. 24 Sec.

Centro-Matic® Automatic Lubrication Systems

Model 283167

Air–Operated (Reciprocating) Oil Pumps

** Air consumption @ 100 psi is .15 CFM per stroke.

Note: Check compatibility when using synthetic oils.

Model 1826

Consists of Model 2002 PowerMaster pump, Model 85217 vent valve assembly,

Model 81675 drum cover, Model 85209 controller, air and lubricant connecting hoses

and 1200 psi (82 bar) safety unloader.

Notes:

1. See System Controls section for detailed controller speciﬁcations.

2. See Industrial Pumping catalog for basic pump speciﬁcation, including air consumption.

Model 1848

Fully automatic assembly including pump, 220-/440-volt motor, translucent reservoir,

1200 psi (82 bar) safety unloader, adjustable pressure switch and time control. Time

control is adjustable for lubrication cycle frequency of 5, 10, 15, 20, 30 or 60 minutes.

Solid state time delay relay (35 sec. to 240 sec.) included for connection of audible or

visual alarm to signal lubrication failure due to empty reservoir or broken supply line.

Note: See Model 85520, System Controls section for controller speciﬁcations.

Electric–Operated Oil Pump

Model: 283167

Lubricant/Air Ratio: 40:1

Output/Min. @ 100 PSI Air: 12 cu. in. / 197 cc

Reservoir Capacity: 15 pint / 7.1 liter, 433 cu. in. / 7100 cc

Air Inlet: ⅛" NPTF (F)

Lube Outlet: ¾" NPTF (F)

Typical System

Operating Pressure:

Min. 750 psig / 52 bar

Max. 1000 psig / 69 bar

Dimensions (HxWxL): 23¼" x 9" x 16¼" / 591 x 229 x 413 mm

Air Valve Required: 3-Way**

Model: 1826

Lubricant/Air Ratio: 24:1

Output @ 75 Cycles/Min: 462 cu. in. / 7571 cc

Drum Size: U.S. standard 55-gal. reﬁnery drum (removable head)

Air Inlet: ⅜" NPTF (F)

Lube Outlet: ¾" NPTF (F)

Typical System

Operating Pressure:

Min. 750 psig / 52 bar

Max. 1000 psig / 69 bar

Controller Electrical

Requirements: 120 V 60 Hz, 110V 50 Hz

Model: 1848

Output/Min: 18 cu. in. / 295 cc

Reservoir Capacity: 14.7 pint / 6.96 liter, 424 cu. in. / 6960cc

Lube Outlet: ¼" NPTF (F)

Electrical

Speciﬁcations:

Pump Motor 220/440 VAC, 60 Hz, 3 ph

Controller Max 115 VAC, 60 Hz

Typical System

Operating Pressure:

Min. 750 psig / 52 bar

Max. 1000 psig / 69 bar

Dimensions (HxWxL): 25⅜" x 13" x 1913⁄16" / 645 x 330 x 503 mm

Includes 2½" air motor driven pump, vent valve assembly, translucent reservoir with

ﬁller cap and strainer and 1200 psi (82 bar) safety unloader.

Centro-Matic® Automatic Lubrication Systems

Bucket Pumps

Model 84050

A 50:1 ratio double acting air-operated pump for high-volume displacement. Supplied

with a 60-pound capacity metal reservoir with removable cover for easy ﬁlling. Includes

air-operated vent valve and 5' (1.5m) air and lubricant connecting hoses.

Same as Model 84050 except includes installed visual low level and follower plate

assembly.

Model 85460

Thick rubber seal to keep

contaminants out

All buckets and followers

come ready to accept the

Lincoln grease level sensor or

overﬂow protection system

2" foam follower for

better bypass protection

Stop bolts on

follower plate to

prevent cocking

Eight bolts to resist

lid loosening

Weld nuts for easy lid

removal

14-gauge steel wall

reduces denting and

follower plate hang-up

Fill tube to center of reser-

voir to prevent cocking of

follower plate

Large 1"NPT ﬁll inlet

for faster ﬁlling

Thick mounting ring with

twice as many mounting

holes to resist loosening

Lincoln offers 60, 90, 120, 240 or 400 lb. reservoirs for our bucket pumps. Here are the features:

• Rugged 14-gauge steel walls

• Large 1" NPT inlet for fast ﬁlling, 1¼" overﬂow outlet

• New 2” foam follower that virtually eliminates grease bypass

• New vent valve to bucket coupling

• Thick mounting ring that withstands severe vibration

These buckets work with hydraulic, air and electric pumps.

Model: 84050

Lubricant/Air Ratio: 50:1

Output/Min @ 100 PSIG Air: 30 cu. in. / 492 cc

Reservoir Capacity: 60 lb. / 27 kg, 1800 cu. in. / 29,500 cc

Air Inlet: ⅜" NPTF (F)

Lube Outlet: ¾" NPTF (M) at Hose

Typical System

Operating Pressure:

Min. 1200 psig / 83 bar

Max. 3500 psig / 241 bar

Dimensions (HxWxL): 31¾" x 157⁄16" x 159⁄16" / 806 x 392 x 395 mm

Filling Method: Bulk

Reservoir: Steel

Notes: 1. Pump requires 3-way air valve.

2. Air consumption @ 100 psi is .42 CFM per cycle

3. Optional Model 92597 follower available.

1¼" overﬂow outlet

Centro-Matic® Automatic Lubrication Systems

FlowMaster® Hydraulic Pump

High-performance FlowMaster hydraulic pumps combine rotary-driven pump motors

with reciprocating pump tubes and ﬂexible control features that perform in desert

heat and arctic cold. Integrated control manifold adjusts the amount of lubricant and

operating pressure. The pump’s output is adjustable from 7 to 45 cubic inches per

minute.

Pump Only Models

For the complete system, when ordering 120 or 400 lb. reﬁnery drum versions also order the following:

Supply Inlet

Hydraulic Pressure, Max.: 3000 psig 200 bar

Operating Inlet

Hydraulic Pressure: 300 to 420 psig 20 to 32 bar

Hydraulic Inlet Flow: Up to 7 gpm 28 l/min

Pump Ratio with

Manifold:

9:1 at low inlet pressure (300 to 350 psi/20 to 25 bar)

and low inlet ﬂow (below 2 gpm/7 lpm) pump ratio

approaches 11:1 ratio at higher inlet pressure and ﬂow

Pump Output: 7 - 45 in³/min

Operating Temperature: -20° to +150°F -10° to +65°C

Solenoid Valve Coil: 24 VDC

Hydraulic Inlet Port: SAE 4

Tank Return Port: SAE 6

Pump Outlets: ¼" NPTF

Max. Hydraulic Fluid

Temp: 200°F 93°C

Model

Capacity Solenoid

Manual

Override

Adjustable

Flow Control

Adjustable

Pressure

Control

Lbs. gal L

85733 120 18 68

No Yes Yes

85732 60 8 30

85734 400 55 208

85731 35 5 19

85676 90 10 38 Yes Fixed Fixed

85678 60 8 30

1¼"

NPT

Capacity Model No. Description

120 lb. 84616 Drum Cover

85492 Follower Assembly

84990 Vent Valve Assembly

400 lb. 271606 Drum Cover

270982 Follower Assembly

271605 Vent Valve Assembly

Centro-Matic® Automatic Lubrication Systems

Pump and Bucket Models with Follower Plate and

Low-Level Detect

Model Lbs. Size

gal L

Solenoid

Manual

Override

Adjustable

Flow

Control

Adjustable

Pressure

Control

85727 *120 18 68 No Ye s Yes

85725 90 10 38

85726 ** 10 38 Yes Fixed Fixed

85722 60 8 30 No Yes Ye s

*Includes high-level detect

**Does not include follower plate or low-level detect

Container

Size

Pump - in. (mm) Pump Bucket-in. (mm)

A B A B

35 lb. 13.69 (348) 24.00 (609.7) 14.59 (371) 24.90 (632.7)

60 lb. 19.00 (483) 29.31 (744.7) 19.90 (505) 30.20 (766.7)

90 lb. 27.50 (699) 37.81 (954.7) 28.40 (721) 40.63 (1,031.7)

120 lb. 27.50 (699) 37.81 (954.7) 28.40 (721) 40.63 (1,031.7)

400 lb. 34.00 (864) 44.31 (1,125.7) 34.00 (864) 45.44 (1,154.7)

19.517

15.090

16.75 for 120# container

FlowMaster® Hydraulic Pump

Pump and Bucket Dimensions

Centro-Matic® Automatic Lubrication Systems

8.97 (228)

2.72

(69)

6.82 (173)

FlowMaster® Electric Pumps

24 and 12 VDC FlowMaster®

It seems too good to be true, but Lincoln’s new Electric FlowMaster Pump can serve

all but the largest automated lubrication applications. Now you can take advantage

of the ease and economy of this efﬁcient, versatile electric pump—no cost for air

associated with running the pump and no hydraulic hoses to connect.

The Electric FlowMaster Pump is a workhorse. Because you can adjust the speed of

the pump’s motor, you can adjust the pump’s output to precisely ﬁt any application.

Lincoln offers 12 different models.

For manual lubrication, use the pump with a hose reel and a dispensing valve.

Pump Only Models

* Kit consisting of pump, follower, bucket cover and hardware

Operating Temperature Range: -40° to +150°F -40° to +65°C

Pump Outlets: 14" NPTF

Motor: 24 VDC 1/2" HP Peak

12 VDC 1/3” HP Peak

Model Capacity Power Maximum

Pressure Rating

Speed Range

RPM

lbs gal L

85479 35 5 19

24 DC

2500 psi (172 bar) 9.5-100

85748 35 5 19

5000 psi (345 bar)

5-50

85749 120 18 68

85737 60 8 30

9.5-100

85738 120 18 68

85747 35 5 19 2500 psi (170 bar)

85739 400 55 208 5000 psi (345 bar)

85752 35 5 19

12 DC

2500 psi (172 bar)

85753 35 5 19 2500 psi (172 bar)

85754 60 8 30 3500 psi (241 bar)

Model Gear Ratio Current Draw

Amps

Output: in³/min

Min Max

85479 *17.8:1 2-5 0.7 6.3

85748 34:1 1-4.2 0.4 3.5

85749 34:1

85737 19:1 1-6.5

0.7 6.3

85738 19:1

85747 17.8:1 2-5

85739 19:1 1-6.5

85752 19:1

1-7.585753 19:1

85754 19:1

5.84

(148)

2.95

(75)

Power

Wires

Speed Control

Potentiometer

1/4 NPTF

Pump Outlets

both sides

Centro-Matic® Automatic Lubrication Systems

24 VDC Electric Vent Valve

Model No. Description

274899 IP 67 Explosion Proof Rating

276325 IP 65 Rating

276903 IP 65 Rating

276919 Hardware Kit for 276903

525-32083-1 IP 54 Rating

Pump and Bucket Models

Above models include follower plate and low-level detect

* Includes high-level detect

Accessories

Description 120 lb. 400 lb.

Follower plate 85492 270982

Drum cover 85474 85475

Vent valve assembly:

24 VDC 85664 85665

Strainer 272180 272180

Model Capacity Power Maximum

Pressure Rating

Speed

Range RPM

lbs gal L

85728 60 8 30

24 DC 5000 psi (345 bar) 9.5 - 10085729 90 10 38

85730 *120 18 68

Model Gear Ratio Current Draw

Amps

Output: in³/min

Min Max

85728

19:1 1 - 6.5 0.7 6.385729

85730

FlowMaster® Electric Pumps

For all FlowMaster II pumps replaced on original

buckets, vent valve kit 278413 will be needed. This

also applies to DC FlowMasters made after 2009.

Centro-Matic® Automatic Lubrication Systems

FlowMaster® Electric Pumps

120/230 VAC FlowMaster®

Now you can save the cost of air and plug in our new 120/230 VAC FlowMaster pump.

Convenient and powerful, the 120/230 VAC FlowMaster pump allows you to tap into

your AC power source and pump grease from a 120 lb. or 400 lb. drum. Rely on it

to drive your automated lubrication systems such as Centro-Matic®, Mod Lube®,

Quicklub® and Two-line.

Pump Only Models

Accessories

Reel-N-Flow Pump and Reel Kits

Pump Models

Model Description

274873 24V, Bare, high-pressure pump

274874 24V, Bare pump with integrated pressure switch and manifold

276041 12V, Bare high-pressure pump

276360 12V, Bare pump with integrated pressure switch and manifold

Kit Models Note: FlowMaster kit models will NOT be discontinued

Model Description Bare

Pump Lid Follower Reel Connecting

Hose

Control

Vlv. &

Swivel

274886 85751 pump, lid and

follower 85751 274878 274888

274887

274886 with hose

reel, 50' hose, control

valve, swivel & 7'

connecting hose

85751 274878 274888 94553H 276366 3050,

81729

276358 85753 pump, lid

andfollower 85753 274878 274888

276359

276358 with hose

reel, 50' hose, control

valve, swivel & 7'

connecting hose

85753 275878 274888 94553H 276366 3050,

81729

Accessories

Model Description

274872 10,000 psi Gauge

274934 35#/5-gal. Container Mount

Operating Temperature Range: -40° to +150°F (-40° to +65°C)

Operating Voltage: 120/230 VAC (50/60 Hz single phase)

Pump Outlets: ¼" NPTF

Motor: ½" HP

Description 120 lb. 400 lb.

Follower plate 85492 270982

Drum cover 85474 85475

Vent valve assembly: 120 VAC

230 VAC

85662

85660

85663

85661

Strainer 272180 272180

Model Capacity Power Maximum Pressure

Rating

Speed

RPM

lbs gal L

85744 400 55 208 120-230 AC 5000 psi (345 bar) 95

85743 120 18 68

Model Gear Ratio Current Draw: Amps Output: in³/min

@120 V @230 V Max

85744 19:1 1-4.6 .5-2.4 6.3

85743

Operating Temperature -20° to +140°F (-29° to +60°C)

Operating Voltage: 24 VDC (18 min., 30 max.)

Motor 1⁄3 HP (0.25 kw)

Max. Current Draw 15 AMPS

Max. Output 18.0 in³/min (295 (cm³/min)

Max. Output Pressure 6,000 psi (413.8 bar)

Pump Weight 35 lbs. kg (15.9)

Hose Reel Capacity ⅜" High Pressure Hose, 50 ft. (15 m)

Mounts on 35#/5-gallon reﬁnery container

Centro-Matic® Automatic Lubrication Systems

• Heavy industry

– Mining

– Steel

– Paper

FlowMaster® Electric Pumps

• General Industry

– Food/beverage

– Automotive

– Packaging

– And others

220 - 460 VAC, 50 Hz / 60 Hz 3 Phase

AC FlowMaster Pump

The high-performance FlowMaster product line is a new generation of pump

technology. Compact and versatile, its unique rotary drive and modular gear

set let you adjust the pump to exactly ﬁt your application.

• Wires directly to existing AC service

• Reduces installation costs – no need to tap into hydraulic circuits or pipe in

compressed air

• Integrates easily to many styles of lubrication systems

Accessories

Description 120 lb. 400 lb.

Follower plate 85492 270982

Drum cover 85474 85475

Vent valve assembly 85660 85661

Strainer 272180 272180

Pump Model: 85745 85746

Pump/Container Size: 120 lb. 400 lb.

Pump Output: 6.3 in³/min. (103 cm³/min.)

Operating Temperature: -40° to 150°F (-40° to 65°C)

Motor Max. Temperature: Up to 220°F (105°C)

Operating Voltage: 3 Phase / 220 - 420 @ 50 Hz / 230 - 460 @ 60 Hz

Motor Power: ½ Hp

Pump Outlet: ¼" NPTF

Centro-Matic® Automatic Lubrication Systems

Hydraulic-Powered Grease Pumps

Model 84944

Hydraulic-operated pump with 60 lb. metal reservoir and vent valve.

Model: 84944

Nominal Lubricant/

Hydraulic Pressure Ratio: 16:1

Output/Min @ 30 Cycles/Min: 11 cu. in. / 180 cc

Reservoir Capacity: 60 lb. / 27 kg ,1800 cu. in. / 29,500 cc

Hydraulic Inlet/Outlet: ¼" NPTF (M)

Lube Outlet: ¾" NPTF (M)

Model 84944

Model 84961

Basic pump only for Model 84944. Includes pump and hydraulic control. Does not

include reservoir or vent valve.

Model 84960

Hydraulic pump for use with U.S. standard 120 lb. reﬁnery drum. System components

(pump, vent assembly, drum cover and follower plate) must be ordered separately.

Model 84960

Hydraulic pump for custom lubricant container installations. Pump length is sized for

U.S. standard 400 lb. reﬁnery drum depth.

Model 84962

Hydraulic Power Supply Requirements

Model 84962

Model Nominal Lubricant/

Hydraulic Pressure Ratio

Output/Min @

30 Cycles/Min

Lube

Outlet

Pump Tube

Length

Pump Tube

Diameter

84960

16:1 11 in³

180 cm³

¼"

NPTF(F)

- -

84962 3315/16"

862 mm

25.4 mm

Hydraulic Inlet

Pressure psig / bar

Flow Rate @

30 Cycles/Min.

GPM ltrs/min

Fluid

Max. Inlet

Temperature

Ambient Operating

Temperature Range Filtration

Requirement

Min Max Min Max

300 /

3000 /

207

1.0 /

3.8

210°F

99°C

-40°F

-40°C

+135°F

57°C

Micron

Important Note:

1. Pumps require a timed electrical signal to operate. Use Model 244270 (not potted) or

249605 (potted) Cycle Timer. See System Controls section for speciﬁcations.

2. Included hydraulic solenoids require 24 VDC.

Important Note:

1. Pumps require a timed electrical signal to operate. Use Model 244270 (not potted) or

249605 (potted) Cycle Timer. See System Controls section for speciﬁcations.

2. Included hydraulic solenoids require 24 VDC. Use Vent Assembly Model 84990; Drum Cover

Model 84616 and Follower Plate Model 83371. Drum Cover and Follower Plate are for use with

Model 84960 only.

Note:

All pumps have a hydraulic pressure reducing valve rated for 60 psi (4 bar) to 800 psi (55 bar) output.

Maximum input is 3000 psi (207 bar).

Centro-Matic® Automatic Lubrication Systems

Airless Spray System

Airless Spray High-Pressure System

No air required—three words describe why Lincoln’s innovative new Airless Spray

System is the only system of its kind on the market. But it takes many more words

to list all the beneﬁts the latest in Lincoln’s long line of technological advances has

to offer. Because no air is required, the Airless Spray System means that mining,

concrete, steel and other heavy industries can look forward to dependable, high-

pressure lubricant spraying that’s low-maintenance and cost-effective.

85418 Airless Spray Valve

Model Operating Voltage Solenoid Valve Initial Current Heater Current

85418 115 VAC .18 Amps 1.80 Amps

Model 85418

Spray Tips

Model Descrip. Std Spray

Tip

Std Tip with

Swivel

Roto-Clean

Tip

Roto-Clean Tip

with Swivel*

252790 Retaining Nut Required Not Required Not Required Not Required

252792 Jet Stabilizer Optional Optional Optional Optional

85423 ** Std. Spray Tip Required Required Not Required Not Required

271579 Swivel Assy Optional Required Optional Required

252831 Body Not Required Not Required Required Required

85427 ** Roto-Clean Tip Not Required Not Required Required Required

Controller

* Discard tip retaining nut and protective cover, supplied with swivel assembly, when installing the roto-clean tip on

a swivel assembly.

** See chart below for spray tip models

Pumps

Lincoln offers many pump options for supplying lubricant to the lube system. Air-

operated pumps are preferred when possible due to their versatility and wide range

of selection. Hydraulic and electric pumps are also available. The pump must be

capable of pumping the lubricant to a minimum of 3500 psi at the airless spray

valve.

Filters

Model 84111

Model 85419

Standard Carbide Spray Tips

Model Model

85423-5001 85423-11003

85423-6501 85423-11004

85423-6502 85423-650067

85423-8001 85423-800067

85423-8002 85423-950080

85423-9501 85423-1100067

85423-9502 85423-1100080

85423-11001

Roto-Clean Carbide Spray Tips

Model Model

85427-5001 85427-9501

85427-6501 85427-9502

85427-6502 85427-650067

85427-8001 85427-800067

85423-8002 85427-1100067

Model Description

85419

Dual ﬁlter panel with operator valve to select one of the two 84111 ﬁlters. The other

ﬁlter is isolated from the system pressure for uninterrupted service and easy element

replacement

84111 High-pressure, single in-line ﬁlter (recommended) 238 micon (60 MESH)

84004 Single in-line ﬁlter 140 micon (100 MESH)

Centro-Matic® Automatic Lubrication Systems

Airless Spray System

Controllers

Model Description

254120 For single and dual Airless systems. Operates system by setting the time between

lubrication events. Includes manual lube button and system alarm.

256228 For single Airless system with external initiate contacts with manual lube button and

system alarm

254815 For dual Airless system with external initiate contacts with manual lube button

and system alarm

Control Wiring Harness Assembly

Model Description

256241 25’ wiring harness connects the controller to each spray valve.

One wiring assembly is required for each spray valve.

High Pressure Grease Supply Line

To be furnished by installer

2-Way Fluid Solenoid Valve

Model Description

272285 For multiple machine/single pump applications. See design guide (form #403172) for

details.

Control

Wiring

Harness

Assembly

Controllers

Filters

Airless

Spray

Valve

Spray

Tips

High-Pressure Grease

Supply Line

Pumps

Centro-Matic® Automatic Lubrication Systems

Pump Accessories

Reservoir Low-Level Alarm Kits

Low-level kits signal need to ﬁll reservoir

Model Lubricant

Type Use with Models Switch

Type

Switch Capacity

Voltage (Amps) Feature

83671 Grease

82653, 82655, 83668,

83800, 83834, 83167,

83599, 1833, 1835,

1849, 85434, 85435,

85436, 85437, 85444,

85445 SPDT

125 VAC (15)

250 VAC (15)

480 VAC (15)

24 VDC (2)

125 VDC (½)

250 VDC (¼)

Connect to machine

control or visual/

audible alarm circuit.

83696 Oil

82570, 82573, 83667,

283167, 1848, 85430

85431, 85440, 85441

84629 Grease 84960

Includes follower

for U.S. Std. 120 lb.

drum.

85490 Grease 84050 None - Includes follower,

visual indication only.

249608 Grease 84050 new style

Follower Plates

Recommended when pumping lubricants that do not readily seek their own level.

Model Use with Pump Model Container Size

83370 87240, 87228 Standard U.S. 400 lb. reﬁnery drum

83371 1823, 282288, 84960 Standard U.S. 120 lb. reﬁnery drum

92544 1828, 1830 Standard U.S. 120 lb. reﬁnery drum

92597 84050, 84944 Lincoln 60 lb. container

252725 85483 Lincoln 35 lb. unit

85489 85481 Lincoln 60 lb. unit

Features and Beneﬁts

• Clogged ﬁlter indicator with quick reset

– Red indicator pin is triggered when the ﬁlter element is almost

completely clogged

– If the ﬁlter element becomes completely clogged, the grease will safely

vent to the atmosphere, preventing contaminated grease from entering

the reservoir

• Promotes cost-effective preventative maintenance

• Custom-designed ﬁlter element

• Allows for easy and quick cleaning or replacement

• Virtually crush proof element; available in both 250 and 470 micron steel

screen sizes

• Durable ductile iron body construction

• 4500 psi (310 bar) pressure rating

• 10 gal./min. (38 liter/min.) maximum ﬂow rate

• Three mounting points for stability

High-Pressure, High-Flow Filter Designed Speciﬁcally for

the Mining, Off-Highway And Industrial Markets

Clean ﬁlter

Clogged

ﬁlter

Model Description

276492 250 micron ﬁlter

276492A 470 micron ﬁlter

282007 250 micron ﬁlter element

282008 470 micron ﬁlter element

Centro-Matic® Automatic Lubrication Systems

Manual Filling Pumps

Designed to provide a fast, clean method of ﬁlling Centro-Matic pumps with a self-

contained reservoir without the risk of lubricant contamination.

Model Lubricant

Type

Lubricant

Output

Container

Capacity

Hose

Length

Lubricant

Outlet

Dimensions - in. / mm

Height Width Container

Diameter

81834

Grease

NLGI #1

Max

1 oz/stroke

1.9 cu. in.

31 cc

30 lbs.

14.2 L

2.1 m

645006

Hydraulic

Coupler 26¾

679

356

229

1254 Oil

1 pint/ 7

strokes 473

30 pints

14.2 L

1.5 m

80599 Non-

Drip Nozzle

Pump Accessories

In-Line Lubricant Filters

Filters mount in pump outlet before vent valve on reciprocating pump systems.

Removes solid contaminants before delivering lubricants to the supply line.

Part

No.

Element Size

micron Maximum Pressure Connections in. Hex Body Size - in.

84004 140

5000 psig / 340 bar ½ NPTF (M) ¼

84528 570

*84239 10 6000 psig / 408 bar ¼ NPTF (F) 1¼

* In-line ﬁlter with ﬂouroelastomer seal.

Model 84004,

84523

Automatic Filling System Pressure Regulator

Pressurized systems automatically keep up to eight, single stroke oil pump reservoirs

full at all times. Use with reservoir seal kits below. Fill pump not included.

* Indicates maximum lubricant output pressure.

Model

Fill Pump

Requirements Fill System Requirements

Lubricant

Inlet/Outlet Vent Outlet

Max. *

psig / bar

Max.

Ratio

Max. Length Reservoir

Pressure

psig / bar

5⁄8" Tube 3⁄8" Tube

83372 125 / 8.6 3:1 100'/ 30.5m 55'/16.8m 5 /.34 ½" NPT(F) ¼" NPTF(F)

Pressure Kits

Seal reservoirs for automatic ﬁlling.

Model Use with Pump Models

83368 82885

83637 82570, 82573

Centro-Matic® Automatic Lubrication Systems

Pump Accessories

Metal Reservoirs: Rectangular reservoirs for gravity

feed oil pumps

Standard ⅜" NPTF outlet furnished for gravity-fed pumps. Features spring loaded cap

with strainer, sight gauge and Buna-N O-rings. Model 84376 Sight Gauge Kit available

for use with synthetic oil.

Model

Capacity Lubricant

Outlet

Dimensions

gal liter Height

Height

Width

in.

Width

Depth

87417 5 19

⅜" NPTF (F) 10⅛257

17½ 446 12½ 318

87418 3 11.3 13½ 343 11½ 292

87419 1.5 5.7 10½ 267 7½ 191

Cylindrical Reservoir

Four-gallon steel tank-type reservoir consisting of Model 82700 tank and Model 82612

mounting brackets. Incorporates large ﬁller opening with screw cap.

Model Tank

Number

Bracket

Number Capacity Lubricant

Output

Dimensions - in. / mm

Height Diameter

82621 82700 82612 4 gal. / 15.1L ½' NPT (F) 18 / 457 9 / 229

Ultrasonic High/Low Sensor to make it easier to know when the 60 lb. Centro-Matic®

automated lubrication system reservoir is getting low on lubricant and when it’s reﬁlled

to capacity. Sensor detects the position of the follower plate with ultrasonic waves to

report the lubricant level. The sensor is factory programmed for a 60 lb. reservoir. Its

two outputs drive external signaling devices or connect with a customer’s PLC. Three

standard LEDs offer visual indication of the sensor’s sensor status and reservoir level.

Ultrasonic Sensor

Model Description

270782 Ultrasonic sensor

270781 Ultrasonic sensor socket (required)

Ambient

Temp. Range Protection Power Supply

Operating Range

Current

less load

Switching Outputs

Max.

Current

High

Level

Low

Level

-13°F to 158°F

-25°C to 70°C IP65 20 - 30 VDC 60 mA 200 mA

contact

(closes

when full)

contact

(opens

when low)

Centro-Matic® Automatic Lubrication Systems

Model 84501 Program Timer—Solid State

System Controls

Note:

Refer to Technical Manual for a full explanation of available program options.

Selecting the right controls for your automated lubrication system is one of the last steps in the design process. Several

different models may be chosen to control power-operated pumps, depending on the degree of automation and monitoring

required. Your Lincoln representative will assist you in specifying the correct model.

Options range from simple timers to fully-automated system controllers and monitors. Basic timers allow you to set the

interval between lubrication cycles. More sophisticated monitors control the frequency of lubrication, oversee system

performance while showing system status and alarms on a LCD display panel. Monitors may be interfaced with machine

control systems to protect your equipment from harm .

You may customize your installation with air and lubricant ﬁlters to prolong system life, pressure gauges for monitoring,

shut-off valves to ease future maintenance and even automated ﬁlling systems to utilize bulk lubricant storage.

All of these possibilities, and more, have made Lincoln Automated Lubrication Systems the choice of industry for over 80

years.

Off Time

(Cycle Time)

On Time

(Pumping Time) Power

Requirement Approvals Switch Capacity

Min. Max. Min. Max.

20 Sec. 24 Hrs. 10 Sec. 1 Min.

24 Sec.

120/230 VAC

50/60 Hz UL, CSA 120 VAC, 5 Amps /

230 VAC, 1.5 Amps

Model 84511 Economy Timer for

Single Stroke Pumps

Uses a timing motor, cam and switch to turn pump off and on. NEMA 1 enclosure,

UL and CSA listed. Switch capacity 10 amps non-inductive.

Note: Off-time selectable in 5 minute intervals.

Enclosure

Rating Dimensions - in. / mm

Height Width Depth

NEMA 1 5 / 127 3¼ / 82.5 3½ / 89

Off Time

(Cycle Time)

On Time

(Pumping Time) Power

Requirement Approvals Switch

Capacity

Min. Max. Min. Max.

Min. 1 Hr. 30 Sec. 90 Sec. 120 VAC, 60Hz UL, CSA 10 Amps

Built-In Program

Options Enclosure Ambient Operating

Temperature Range

3 Hr. Program

Memory

Prelube

Function Rating Dimensions-in. / mm Minimum Maximum

Height Width Depth

Yes / No Yes / No NEMA #1 8¼ / 210 613⁄16 / 173 415⁄16 / 125 0°F /-18°C 130°F/54°C

Designed to control the lubrication cycle frequency of air-operated single-stroke

pumps. Timer turns pump on/off at programmed intervals via a 3-way or 4-way air

solenoid valve (not included) installed in the air line to pump.

Centro-Matic® Automatic Lubrication Systems

System Controls

Model 84015 Timer—12-24V DC

Solid-state microprocessor-based controller for automated lubrication systems on

mobile equipment or where AC power is not available. Rugged construction with

liquid- and dust-tight enclosure. Includes manual push-button for remote initiation

of a lube cycle.

Off Time** (Cycle Time) Fixed On Time

(Pumping Time)

Power

Requirement

Switch

Capacity

Min. Max.

2.5 Min. 80 Min. 75 Sec. 10-30 VDC 25 MA* 5 Amps

* Less load.

Model 85520 Programmable Controller

Microprocessor-controlled, 120 volt AC unit is fully programmable. Controller has a

wider off-time range than timers and a memory switch to turn pre-lube option on or off.

Model 85525 Programmable Controller

Same as Model 85520 except includes pressure switch and mounting brackets.

Model 85535 System Controller—24V DC

Same as Model 85520 except is a 24-volt DC - max “on” time = 2 min.

Enclosure Ambient Operating Temperature Range

Rating Dimensions-in. / mm Minimum Maximum

Height Width Depth

NEMA

12 5¼ / 133 3⅛ / 79 3 / 76 0°F / -18°C 131°F / 55°C

** Available selections are 2.5, 5, 10, 20, 40 or 80 minutes.

Off Time

(Cycle Time)

On Time

(Pumping Time) Power

Requirements

Switch Capacity

Inductive Load

at 120VAC

Min. Max. Min. Max. Load

Relay

Alarm

Relay

30 Sec. 30 Hours 30 Sec. 300 Sec. 120 VAC

50/60 Hz 2 Amps 2 Amps

Enclosure Ambient Operating Temperature Range

Rating Dimensions-in. / mm Minimum Maximum

Height Width Depth

NEMA 12 7½ / 191 415⁄16 / 125 3½ / 89 -13°F / -18°C 150°F / 55°C

Centro-Matic® Automatic Lubrication Systems

Model 85530 Lubrication System Controller

System Controls

Controls lubrication frequency and monitors supply line pressure. The LCD displays

operating status.

* Minimum duration of count signal is 33 milliseconds.

Note: Model 85530 is CSA/NRTL approved.

Model 85209 Panel Mounted Pneumatic

Control System

Panel mounted units control lubrication frequency and monitor supply line pressure.

Includes Model 85530 Controller (speciﬁcations above), Model 69630 Pressure Switch

and solenoid-operated air valve.

Model 85208

Same as Model 85209 except 220 VAC, 50-60 Hz power.

Lube Cycle

Max

Count

Rate*

Pumping Time

Before Alarm

Timer Mode

Off Time

Counter Mode

Off Counts Min. Max.

Min. Max. Min. Max.

1 Minute 9,900 Minutes 1 Count 99,000 Counts

30/Sec. @

50% Duty

Cycle

1 Minute 9,900

Minutes

Lube Cycle

Max

Count

Rate*

Pumping Time

Before Alarm Connections

Timer Mode

Off Time

Counter Mode

Off Counts Min. Max. Air Lube

Min. Max. Min. Max.

1 Minute 9,900

Minutes 1 Count 99,000

Counts

30/

Sec.

Minute

9,900

Minutes

⅜"

NPTF(F)

¾"

NPTF(F)

Power Requirements External Alarm

Load Capacity

Ambient

Temperature

Range

Panel Dimensions

in. / mm

Voltage Current

(less load) Height Width

120 VAC, 60 Hz

110 VAC, 50 Hz 47 VA 360 VA 32° to 122°F

0° to +50°C

12 /

305

18¼ /

464

Power Requirements

(less load)

Pump,

Solenoid,

or Alarm

Capacity

Ambient

Temperature

Range

Enclosure

Voltage Current Rating Dimensions-in. / mm

Height Width Depth

120 VAC, 50/60 Hz 85 MA 360 VA 32° to 122°F

-0° to +50° C

NEMA

9½

241

815⁄16

227

41⁄8

105

230 VAC, 50/60 HZ 45 MA

24 VDC 250 MA 5 Amps

Centro-Matic® Automatic Lubrication Systems

System Controls

Model 247333 Pressure Transducer

Pressure Transducer signals actual system pressure. Comes with 72 inch (1.8m) shielded

24-gauge connecting wire. Maximum length of wire between transducer and monitor is 30 ft.

(9.1 m).

Range Accuracy Proof Pressure

Connection

Ambient

Temp. Input Voltage

Output Offset Enclosure

0 to

4000 psi

276 bar

±1% 7500 psig

517 bar

¼" NPT

Male Thread

-20° to 180° F

-29° to 82° C

10 to 30

VDC 1-6 VDC 1 VDC

NEMA 4X

Rating

300 Series

Stainless

Steel

Electric Solenoid-Operated Air Valves

Model 249605 Sealed Cycle Timer

Sealed timer attaches to Lincoln 16:1 Hydraulic Pumps and generates timed pulse signal to

control pump reciprocating cycle rate.

Model Type

Electrical Characteristics Air

Inlet/

Outlet

Ambient

Temperature

Range

Factor

Max.

Pressure

psi / bar

Conduit

Connection

Power

Requirements

Inrush

Current

Amps

Holding

Current

Amps

350244

4-Way

110 VAC, 50 Hz

120 VAC, 60 Hz

8.4 VA

.11 .07

NPT(F)

0° to 120°F

-18° to 49°C 1.2

150 / 10.3

½" NPS(F)

350245

220 VAC, 50 Hz

240 VAC, 60 Hz

8.4 VA

.055 .035

350241

3-Way

110 VAC, 50 Hz

120 VAC, 60 Hz

8.4 VA

.11 .07

0° to 140°F

-18° to 60°C

.18

350242

220 VAC, 50 Hz

240 VAC, 60 Hz

8.4 VA

.055 .035

350282 12 VDC 6 Watts N/A N/A ⅛"

NPT(F) N/A

350283 24 VDC 6 Watts

68586 2-Way 120V, 60 Hz 12

VA .2 .1 ⅜"

NPT(F) 2.4 ½" NPT(F)

274398

3-Way

24 VDC 8.5

Watts N/A N/A ¼"

NPT(F) .5 N/A

244727

110 VAC, 50 Hz

120 VAC, 60 Hz

11 VA

.12 .09 ⅜"

NPT(F)

0° to 120°F

-18° to 49°C 4.4 ½" NPT(F)

Power

Requirement

Cycle Rate/Minute

Min. Max

24 VDC 6 60

Centro-Matic® Automatic Lubrication Systems

System Controls

End-of-Line Monitors

Designed to detect system pressure utilizing normally open or normally closed switch.

Model Switch

Rating

Operating Range -

psig / bar Lube

Inlet

Dimensions -

in / mm Conduit

Connection

Min. Max Height Width

83898 125, 250

480 VAC,

15 Amps

1200 / 83 2500 / 172 ¼"

NPTF(F) 5¾ / 146 2¼ / 57 ½" NPSM

83899 700 / 48 1150 / 79

Senses supply line pressure rise/fall to signal system operation to controller or

system alarm.

Model 69630 Pressure Switch

Type

Switch Capacity Adjustable Range - psig

/ bar Connections

AC DC Decreasing Increasing Lube Electrical

Min Max Min. Max.

Single

Contact

10 Amps at

125, 250 or

480 VDC

15Amps@6VDC

5Amps@24VDC .03

Amps@ 250 VDC

250 /

2775 /

191

280 /

3000

/ 207

¼"

NPT(F)

27⁄32" hole for

½" conduit

connector

Note: Pressure switch has a NEMA 3 housing and UL listed switching elements.

Centro-Matic® Automatic Lubrication Systems

Numerical Index

P603S......................28, 29

P653S...................25, 26, 27

SL-1 ..........................10

SL-11 .........................11

SL-32 ..........................6

SL-32HV........................7

SL-32 METRIC..................16

SL-33 ..........................5

SL-33 METRIC..................16

SL-41 .........................14

SL-42 .........................12

SL-42 METRIC..................16

SL-43 .........................13

SL-44 .........................15

SL-V ...........................8

SL-V XL ........................9

525-32083-1....................43

645-41062-3....................28

645-41062-4....................28

645-41062-7....................28

645-41062-8....................28

645-41062-9....................28

645-41064-2....................28

645-41064-3....................28

645-41064-4....................28

645-41064-6....................28

645-41064-7....................28

645-41064-8....................28

645-41073-5....................28

645-41110-2....................28

645-41110-3....................28

645-41119-1....................28

645-41119-2....................28

645-41175-5....................28

1254 ..........................50

1810 ..........................30

1812 ..........................35

1823 .......................34, 49

1826 ..........................38

1827 ..........................34

1828 .......................34, 49

1829 ..........................34

1830 ..........................49

1833 .......................35, 49

1835 .......................35, 49

1848 .......................38, 49

1849 .......................35, 49

2002 ..........................38

2004 . . . . . . . . . . . . . . . . . . . . . . . . . . 34

2008 ..........................34

2010 ..........................34

3050 . . . . . . . . . . . . . . . . . . . . . . . . . . 44

12511 .........................18

12511-9 .......................18

12698 .........................18

12698-9 .......................18

14988 .........................17

14991 .........................17

66260 .........................18

66260-9 .......................18

66713 .........................18

67007 .........................18

67007-9 .......................18

67044 .........................18

68421 .........................18

68483 .........................17

68586 .........................55

68587 .........................18

68874 .........................18

69456 .........................18

69630 ......................54, 56

80072 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80073 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80074 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80075 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80076 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80077 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80078 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80079 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80080 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80081 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80082 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80083 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80084 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80085 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80086 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80087 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80088 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80089 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80090 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80091 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80105 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80106 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80107 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80108 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80109 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80110 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80111 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80112 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80120 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80121 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80122 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80127 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80128 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80129 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80130 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80131 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80134 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80135 . . . . . . . . . . . . . . . . . . . . . . . . . 27

80599 .........................50

81646 .........................17

81675 ......................34, 38

81713 .........................10

81713A .......................10

81729 . . . . . . . . . . . . . . . . . . . . . . . . . 44

81770-1 .......................10

81770-2 .......................10

81770-3 .......................10

81770-4 .......................10

81770-5 .......................10

81770-6 .......................10

81834 . . . . . . . . . . . . . 30, 32, 33, 35, 50

82272 .........................18

82292 . . . . . . . . . . . . . . . . . . . . . . . . . 14

82294-1 .......................14

82294-2 .......................14

82294-3 .......................14

82294-4 .......................14

82294-5 .......................14

82295 .........................14

82570 ......................37, 50

82573 ......................37, 50

82612 .........................51

82621 .........................51

82653 ......................32, 49

82655 ......................32, 49

82676 .........................37

82700 .........................51

82885 ......................37, 50

82886 .........................32

83167 ......................33, 49

83272 .........................17

83309-1 ........................5

83309-2 ........................5

83309-3 ........................5

83309-4 ........................5

83309-5 ........................5

83309-6 ........................5

83311-1 .......................12

83311-2 .......................12

83311-3 .......................12

83311-4 .......................12

83311-5 .......................12

83311-6 .......................12

83311-10 ......................12

83311-15 ......................12

83313 .........................12

83314 ..........................5

83314-9 ........................5

Model No. Page No. Model No. Page No. Model No. Page No.

Centro-Matic® Automatic Lubrication Systems

83336-1 ........................6

83336HV-1 ......................7

83336-2 ........................6

83336HV-2 ......................7

83336-3 ........................6

83336HV-3 ......................7

83336-4 ........................6

83336HV-4 ......................7

83336HV-5 ......................7

83336HV-6 ......................7

83336HV-7 ......................7

83336HV-8 ......................7

83336HV-9 ......................7

83336HV-10 .....................7

83337 ..........................6

83337HV........................7

83337-9 ........................6

83338 ..........................6

83338HV........................7

83447 . . . . . . . . . . . . . . . . . . . . . . . . . 34

83368 .........................50

83370 .........................49

83371 ...................34, 46, 49

83372 .........................50

83535 .........................12

83599 ......................33, 49

83637 .........................50

83661-2 .......................13

83661-3 .......................13

83661-4 .......................13

83660 .........................13

83661-1 .......................13

83667 ......................37, 49

83668 ......................32, 49

83671 .........................49

83696 .........................49

83715-1 ........................5

83715-2 ........................5

83715-3 ........................5

83715-4 ........................5

83715-6 ........................5

83715-7 ........................5

83724-1 ........................6

83724-2 ........................6

83724-3 ........................6

83724-4 ........................6

83730 .........................17

83748 .........................15

83749-1 .......................15

83749-2 .......................15

83749-3 .......................15

83749-4 .......................15

83749-5 .......................15

83800 ......................32, 49

83817 .........................30

83834 ......................32, 49

83898 .........................56

83899 .........................56

83900 ..........................5

83900-9 ........................5

83924 .........................18

83924-9 .......................18

84004 ......................47, 50

84015 .........................53

84034 .........................34

84048 .........................12

84050 ......................39, 49

84110 .........................13

84111 .........................47

84195 .........................17

84200 .........................17

84203 .........................17

84204 .........................18

84239 .........................50

84376 .........................51

84428-1 .......................12

84428-2 .......................12

84428-3 .......................12

84428-4 .......................12

84428-5 .......................12

84428-6 .......................12

84428-10 ......................12

84428-15 ......................12

84429-1 .......................13

84429-2 .......................13

84429-3 .......................13

84429-4 .......................13

84501 ...................32, 37, 52

84511 .........................52

84528 .........................50

84616 ......................40, 46

84629 .........................49

84776 .........................10

84944 ......................46, 49

84960 ......................46, 49

84961 .........................46

84962 .........................46

84990 ......................40, 46

85208 .........................54

85209 ...................34, 38, 54

85215 .........................34

85217 .........................38

85218 .........................34

85220 .........................20

85351-1 .......................16

85351-2 .......................16

85351-3 .......................16

85351-4 .......................16

85351-5 .......................16

85351-6 .......................16

85352-1 .......................16

85352-2 .......................16

85352-3 .......................16

85352-4 .......................16

85352-5 .......................16

85352-6 .......................16

85353-1 .......................16

85353-2 .......................16

85353-3 .......................16

85353-4 .......................16

85391 .........................37

85414 . . . . . . . . . . . . . . . . . . . . . . . . . 23

85418 .........................47

85419 .........................47

85423 . . . . . . . . . . . . . . . . . . . . . . . . . 47

85424 . . . . . . . . . . . . . . . . . . . . . . . . . 23

85425 . . . . . . . . . . . . . . . . . . . . . . . . . 23

85427 . . . . . . . . . . . . . . . . . . . . . . . . . 47

85423-5001 ....................47

85423-6501 ....................47

85423-6502 ....................47

85423-8001 ....................47

85423-8002 ....................47

85423-9501 ....................47

85423-9502 ....................47

85423-11001 ...................47

85423-11003 ...................47

85423-11004 ...................47

85423-650067 ..................47

85423-800067 ..................47

85423-950080 ..................47

85423-1100067 . . . . . . . . . . . . . . . . . 47

85423-1100080 . . . . . . . . . . . . . . . . . 47

85427-5001 ....................47

85427-6501 ....................47

85427-6502 ....................47

85427-8001 ....................47

85427-8002 ....................47

85427-9501 ....................47

85427-9502 ....................47

85427-650067 ..................47

85427-800067 ..................47

85427-1100067 . . . . . . . . . . . . . . . . . 47

85429 . . . . . . . . . . . . . . . . . . . . . . . . . 23

85430 ......................36, 49

85431 ......................36, 49

85432 .........................36

85433 .........................36

85434 ......................31, 49

Model No. Page No. Model No. Page No. Model No. Page No.

Numerical Index

Centro-Matic® Automatic Lubrication Systems

Numerical Index

85435 ......................31, 49

85436 ......................31, 49

85437 .........................49

85438 .........................36

85440 ......................36, 49

85441 ......................36, 49

85442 .........................31

85444 ......................31, 49

85445 ......................31, 49

85446 . . . . . . . . . . . . . . . . . . . . . . . . . 24

85460 .........................39

85471 .........................20

85472 .........................20

85473 .........................20

85474 ...................43, 44, 45

85475 ...................43, 44, 45

85479 . . . . . . . . . . . . . . . . . . . . . . . . . 42

85480 .........................20

85481 ......................20, 49

85482 .........................20

85483 ......................20, 49

85484 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85487 .........................20

85489 .........................49

85490 .........................49

85492 . . . . . . . . . . . . . . . . 40, 43, 44, 45

85497 .........................11

85518 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85520 ...................35, 38, 53

85525 .........................53

85530 .........................54

85535 .........................53

85552 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85553 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85554 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85566 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85569 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85585 .........................20

85587 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85591 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85592 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85598 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85599 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85660 ......................44, 45

85661 ......................44, 45

85662 .........................44

85663 .........................44

85664 . . . . . . . . . . . . . . . . . . . . . . . . . 43

85665 . . . . . . . . . . . . . . . . . . . . . . . . . 43

85676 ......................20, 40

85677 .........................20

85678 ......................20, 40

85706 . . . . . . . . . . . . . . . . . . . . . . . . . 22

85722 . . . . . . . . . . . . . . . . . . . . . . 20, 41

85723 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85724 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85725 . . . . . . . . . . . . . . . . . . . . . . 20, 41

85726 . . . . . . . . . . . . . . . . . . . . . . 20, 41

85727 . . . . . . . . . . . . . . . . . . . . . . 20, 41

85728 . . . . . . . . . . . . . . . . . . . 20, 41, 43

85729 . . . . . . . . . . . . . . . . . . . . . . 20, 43

85730 . . . . . . . . . . . . . . . . . . . . . . 20, 43

85731 . . . . . . . . . . . . . . . . . . . . . . 20, 40

85732 . . . . . . . . . . . . . . . . . . . . . . 20, 40

85733 . . . . . . . . . . . . . . . . . . . . . . 20, 40

85734 . . . . . . . . . . . . . . . . . . . . . . 20, 40

85735 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85736 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85737 . . . . . . . . . . . . . . . . . . . . . . 20, 42

85738 . . . . . . . . . . . . . . . . . . . . . . 20, 42

85739 . . . . . . . . . . . . . . . . . . . . . . 20, 42

85740 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85741 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85742 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85743 . . . . . . . . . . . . . . . . . . . . . . 20, 44

85744 . . . . . . . . . . . . . . . . . . . . . . 20, 44

85745 . . . . . . . . . . . . . . . . . . . . . . 20, 45

85746 . . . . . . . . . . . . . . . . . . . . . . 20, 45

85747 . . . . . . . . . . . . . . . . . . . . . . 20, 42

85748 . . . . . . . . . . . . . . . . . . . . . . 20, 42

85749 . . . . . . . . . . . . . . . . . . . . . . 20, 42

85750 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85751 . . . . . . . . . . . . . . . . . . . . . . 20, 44

85752 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85753 . . . . . . . . . . . . . . . . . . . . . . 20, 44

85754 . . . . . . . . . . . . . . . . . . . . . . 20, 42

85762 . . . . . . . . . . . . . . . . . . . . . . . . . 22

85763 . . . . . . . . . . . . . . . . . . . . . . . . . 22

85770-1 ........................8

85770-2 ........................8

85770-3 ........................8

85770-4 ........................8

85770-5 ........................8

85770-6 ........................8

85771 ..........................8

85772 ..........................8

85780-1 ........................9

85780-2 ........................9

85780-3 ........................9

85780-4 ........................9

85780-5 ........................9

85780-6 ........................9

85781 ..........................9

85782 ..........................9

85785-1 ........................9

85785-2 ........................9

85785-3 ........................9

85785-4 ........................9

85785-5 ........................9

85785-6 ........................9

85785-7 ........................9

85785-8 ........................9

85785-9 ........................9

85785-10 .......................9

85850 . . . . . . . . . . . . . . . . . . . . . . . . . 20

85851 . . . . . . . . . . . . . . . . . . . . . . . . . 20

86258 .........................20

87228 . . . . . . . . . . . . . . . . . . . . . . . . . 49

87240 . . . . . . . . . . . . . . . . . . . . . . . . . 49

87417 .........................51

87418 .........................51

87419 .........................51

90537 .........................17

92544 .........................49

92597 ......................39, 49

94553H........................44

102781 ........................17

201849 . . . . . . . . . . . . . . . . . . . . . . . . 35

239351 ........................10

239352 ........................10

239353 ........................10

239354 ........................10

239355 ........................10

244270 ........................46

244727 ........................55

247333 ........................55

249281 .....................17, 18

249282 .....................17, 18

249605 .....................46, 55

249608 ........................49

252725 ........................49

252790 ........................47

252792 ........................47

252831 ........................47

254120 ........................48

254815 ........................48

256228 ........................48

256241 ........................48

270781 ........................51

270782 ........................51

270982 . . . . . . . . . . . . . . . 40, 43, 44, 45

271579 ........................47

271605 ........................40

271606 ........................40

271924 . . . . . . . . . . . . . . . . . . . . . . . . 23

271925 . . . . . . . . . . . . . . . . . . . . . . . . 23

271926 . . . . . . . . . . . . . . . . . . . . . . . . 23

271927 . . . . . . . . . . . . . . . . . . . . . . . . 23

272180 . . . . . . . . . . . . . . . . . . 43, 44, 45

Model No. Page No. Model No. Page No. Model No. Page No.

Centro-Matic® Automatic Lubrication Systems

Numerical Index

272285 ........................48

273088 ........................17

273089 ........................17

274312 . . . . . . . . . . . . . . . . . . . . . . . . 22

274398 ........................55

274524 . . . . . . . . . . . . . . . . . . . . . . . . 22

274824 . . . . . . . . . . . . . . . . . . . . . . . . 17

274872 . . . . . . . . . . . . . . . . . . . . . 22, 44

274873 . . . . . . . . . . . . . . . . . . . . . 20, 44

274874 . . . . . . . . . . . . . . . . . . . . . . . . 20

274878 . . . . . . . . . . . . . . . . . . . . . . . . 44

274886 . . . . . . . . . . . . . . . . . . . . . . . . 44

274887 . . . . . . . . . . . . . . . . . . . . . . . . 44

274888 . . . . . . . . . . . . . . . . . . . . . . . . 44

274899 . . . . . . . . . . . . . . . . . . . . . . . . 43

274934 . . . . . . . . . . . . . . . . . . . . . . . . 44

275878 . . . . . . . . . . . . . . . . . . . . . . . . 44

276041 . . . . . . . . . . . . . . . . . . . . . 20, 44

276325 . . . . . . . . . . . . . . . . . . . . . . . . 43

276358 . . . . . . . . . . . . . . . . . . . . . . . . 44

276359 . . . . . . . . . . . . . . . . . . . . . . . . 44

276360 . . . . . . . . . . . . . . . . . . . . . . . . 20

276366 . . . . . . . . . . . . . . . . . . . . . . . . 44

276492 . . . . . . . . . . . . . . . . . . . . . . . . 49

276492A.......................49

276764 . . . . . . . . . . . . . . . . . . . . . . . . 25

276765 . . . . . . . . . . . . . . . . . . . . . . . . 25

276849 . . . . . . . . . . . . . . . . . . . . . . . . 22

276903 . . . . . . . . . . . . . . . . . . . . . . . . 43

276919 . . . . . . . . . . . . . . . . . . . . . . . . 43

277560 . . . . . . . . . . . . . . . . . . . . . . . . 20

277654 . . . . . . . . . . . . . . . . . . . . . . . . 22

277659 . . . . . . . . . . . . . . . . . . . . . . . . 22

277703 . . . . . . . . . . . . . . . . . . . . . . . . 22

278092 . . . . . . . . . . . . . . . . . . . . . . . . 22

278094 . . . . . . . . . . . . . . . . . . . . . . . . 22

278095 . . . . . . . . . . . . . . . . . . . . . . . . 22

278096 . . . . . . . . . . . . . . . . . . . . . . . . 22

278097 . . . . . . . . . . . . . . . . . . . . . . . . 22

280414 . . . . . . . . . . . . . . . . . . . . . . . . 22

280441 . . . . . . . . . . . . . . . . . . . . . . . . 22

280442 . . . . . . . . . . . . . . . . . . . . . . . . 22

280450 . . . . . . . . . . . . . . . . . . . . . . . . 22

280455 . . . . . . . . . . . . . . . . . . . . . . . . 22

282007 . . . . . . . . . . . . . . . . . . . . . . . . 49

282008 . . . . . . . . . . . . . . . . . . . . . . . . 49

282288 .....................34, 49

283005 ........................22

283167 .....................38, 49

350241 ........................55

350242 ........................55

350244 ..................32, 37, 55

350245 ........................55

350282 ........................55

350283 ........................55

645006 . . . . . . . . . . . . 30, 32, 33, 35, 50

Model No. Page No. Model No. Page No. Model No. Page No.

A complete line of lubrication solutions

and industrial pumping products

Automatic lubrication

Our automatic systems dispense

measured amounts of lubricant at

predetermined intervals. Systems include

Helios® and Duo-Matic™ two-line

systems, and Centro-Matic®, Modular

Lube®, Quicklub® and ORSCO precision

oil lubrication. With our BearingSaver®

program, we ﬁnd the best automatic

solution for you from our wide range of

systems for grease, ﬂuid grease and oil.

General lubrication

Sometimes a simple approach is the best

solution. Our wide range of products

includes smaller, self-contained auto-

matic lubricators and general lubrication

equipment.

Industrial pumping

Lincoln has developed specialized pumps

and pumping stations to handle the

difﬁcult job of transferring thick ﬂuids.

From the industry-best PileDriver III®

and PowerMaster III® pumps and air

motors to specialty pumps, controls

and mounting accessories, Lincoln is

the preferred pumping system for many

tough applications.

skf.com

® SKF is a registered trademark of the SKF Group.

® Lincoln, Centro-Matic and FlowMaster are registered trademarks of Lincoln Industrial Corp.

The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written per-

mission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can

be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein.

December 2013 · FORM 442832

F Series Centro Matic

Navigation menu

Versions of this User Manual:

Views

Navigation