Crane Project Valves Catalogue
User Manual: Crane Project Valves Catalogue
Open the PDF directly: View PDF .
Page Count: 87
Download | |
Open PDF In Browser | View PDF |
ISSUE ONE PROJECT VALVES CATALOGUE WATER | HEATING | VENTILATION O U R G E N I U S I S VA LV E S | AIR CON | GAS Contents Introduction 3 Balancing Valves 4 Valve Family Public Health 76 Balancing Automatic 4 Ball Valves 25 Thermal Balancing Valves Balancing Static 7 Butterfly Valves 35 Thermostatic 78 Mixing Valves CommPac 19 Check Valves 39 Pressure Reducing Valves Differential Pressure Control Valves 21 Gate Valves 46 Dominator 22 Globe Valves 65 Pressure Independent 24 Control Valve FULL TECHNICAL DATA AVAILABLE ON WWW.CRANEFS.COM 2 25 CRANE FLUID SYSTEMS PROJECT VALVES CATALOGUE Strainers 76 80 Typical Kv values 82 Quality Control 83 Project Gallery 84 71 Index of Figure Numbers 86 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com Introduction Crane Fluid Systems - Our Genius is Valves History Crane Fluid Systems offers a full range of traditional ball, butterfly, check, gate and globe valves along with the ProBalance range of static and dynamic balancing valves as well as flow management modules. Widely specified in the HVAC industry, product quality, reliability and technical expertise enable Crane Fluid Systems to remain at the forefront of the building services market. In 1906 James E. Bennett set up a business in London as a Coppersmith. He soon recognised a growing interest in the trade for the latest American pipe fittings and valves, and turned his attention to importing. Amongst the products he introduced to British Industry were those of Crane Co, a thriving American company founded in the mid 19th century. Our Corporate Vision is to be the leading provider of valves, pipe fittings and engineered products for fluid handling applications in building services and general industrial markets. We aim to be our customers preferred supplier by offering products which provide best value together with a service that exceeds customers' expectations. Crane soon realised that a manufacturing unit in this country would help expand their international business. In 1919, Crane Co. purchased the assets of the English company and changed its name to Crane-Bennett Limited with the intention of making products in England. Crane Fluid Systems is a leading brand of Crane Building Services & Utilities which forms part of the Fluid Handling Group, a division of the parent company Crane Co. Today as part of Crane Building Services & Utilities, Crane Fluid Systems is joined by an array of complimentary building services brands including NABIC, Brownall, Wade, Rhodes and IAT. Richard Teller Crane Today & Tomorrow Crane Co was founded on the 5th July 1855 by Richard Teller Crane who made the following resolution: “I am resolved to conduct my business in the strictest honesty and fairness; to avoid all deception and trickery; to deal fairly with both customers and competitors; to be liberal and just towards employees; and to put my whole mind upon the business.” The essence of this resolution is the business policy of Crane Co today. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 3 BALANCING - AUTOMATIC D9601 Automatic Balancing Valve (ABV) Automatically maintains flow at the specified rate regardless of fluctuations in system pressure. Features & Benefits • • • • • • • • • • Selection of the appropriate cartridge provides design flow rate. Compact size. Energy efficient, preventing overflows or excess flow rates. Design changes can be easily made by selection of the appropriate cartridge, eliminating the need for recommissioning. Male threaded body comes complete with female adaptors which allows for easy installation and removal of cartridge for flushing. Can be installed in any pipework configuration - does not require straight lengths of pipe. Dynamic flow-limiting characteristics permit variable volume systems to function correctly. Tamperproof. Also available without test points -(D9600). Also available with American threads - (D9600AT without test points) & (D9601AT with test points). D9601 Dimensional Drawing Materials PART MATERIAL SPECIFICATION Union nut Brass BS EN 12165 CW617N Union DZR Brass BS EN 12165 CW602N Union O-ring EPDM Perox - Distance ring DZR Brass BS EN 12164 CW602N Body DZR Brass BS EN 12165 CW602N Plug gasket Copper - Plug DZR Brass BS EN 12164 CW602N Cartridge plug POM* - Shaped opening Stainless steel - Cartridge body POM* - Cartridge spring Stainless steel - Cartridge O-ring EPDM Perox - Test point DZR Brass BS EN 12164 CW602N Tie Polyp. (blue/red) - *PA66/30G for DN<25 Dimensions and Weights DN R A (mm) HT (mm) HP (mm) VALVE WEIGHT (kg)* CARTRIDGE WEIGHT (kg) /2|| 111 35 67 0.42/0.52 0.04 /4|| 117 35 67 0.47/0.53 0.04 25 1|| 123 35 67 0.48/0.55 0.04 32 11/4|| 159 43 75 1.36/1.43 0.10 40 11/2|| 159 43 75 1.47/1.53 0.10 50 2|| 241 60 92 3.00/3.06 0.40 65 21/2|| 241 60 92 3.98/4.05 0.40 80 3|| 292 60 92 4.78/4.85 0.40 15 1 20 3 *Without test points/with test points Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 4 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALANCING - AUTOMATIC C960 ABV Cartridges Cartridges Cartridges are available in 6 ranges of working differential pressure. Cartridge colour allows easy identification of each: • White 15- 85 kPa (W code) • Gray 55-380kPa (O code) • Blue 32-180kPa (B code) • Black 60-480kPa (A code) • Red 45-280kPa (R code) • Green 65-580kPa (G code) A numeric code is stamped on each cartridge, this together with the colour codes, identifies each cartridge. Example: White 15=15-85 kPa - 0.076 l/s | Red 17=45-280 kPa - 0.165 l/s C960 Test points allow verification of differential pressure range 1⁄2" to 1" Cartridges FLOW l/s WHITE 15-85 kPa 0.076 0.095 0.103 0.105 0.107 0.111 0.117 0.129 0.141 0.151 0.162 0.165 0.169 0.170 0.191 0.194 0.196 0.206 0.210 0.213 0.216 0.227 0.236 0.242 0.253 0.255 0.256 0.258 0.262 0.272 0.278 0.287 0.291 0.295 0.302 0.313 0.323 0.329 0.336 0.341 15 BLUE 32-180 kPa RED 45-280 kPa GREY 55-380 kPa BLACK 60-480 kPa GREEN 65-580 kPa 15 17 13 15 13 13 23 25 17 21 17 17 29 21 25 23 31 23 25 33 23 21 23 31 25 29 35 25 29 37 39 33 23 29 31 29 35 43 44 31 FLOW l/s 0.353 0.359 0.363 0.364 0.368 0.371 0.374 0.391 0.396 0.400 0.404 0.410 0.420 0.430 0.433 0.435 0.436 0.452 0.458 0.465 0.469 0.475 0.479 0.495 0.497 0.500 0.515 0.526 0.528 0.545 0.569 0.570 0.573 0.589 0.590 0.591 0.619 0.623 0.635 0.651 WHITE 15-85 kPa BLUE 32-180 kPa RED 45-280 kPa GREY 55-380 kPa BLACK 60-480 kPa GREEN 65-580 kPa 29 33 31 49 45 37 39 31 41 35 44 51 43 33 33 45 39 53 37 35 33 55 35 37 37 41 49 43 37 39 41 44 39 51 53 39 43 49 41 45 43 55 51 Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 5 BALANCING - AUTOMATIC C960 ABV Cartridges 11⁄4" to 11⁄2" Cartridges FLOW l/s WHITE 15-85 kPa 0.209 100 0.244 0.281 0.303 0.324 0.361 0.363 0.385 0.392 0.439 0.450 0.458 0.521 0.525 0.550 0.561 0.583 0.596 0.619 0.636 0.666 0.713 0.720 0.732 0.735 0.755 0.771 0.796 0.800 0.829 0.838 0.878 0.892 0.900 0.903 0.908 0.944 0.964 105 BLUE 22-180 kPa RED 32-280 kPa ORANGE 45-380 kPa 100 110 105 115 105 110 110 120 115 125 130 110 135 120 115 140 125 145 150 155 120 125 130 135 140 160 145 125 130 130 150 170 135 135 155 175 FLOW l/s 0.981 1.011 1.018 1.033 1.067 1.086 1.097 1.119 1.133 1.161 1.169 1.210 1.225 1.242 1.247 1.262 1.306 1.333 1.382 1.383 1.400 1.439 1.440 1.470 1.494 1.561 1.572 1.600 1.632 1.646 1.660 1.742 1.751 1.763 1.800 1.910 1.917 1.958 WHITE 15-85 kPa BLUE 22-180 kPa RED 32-280 kPa ORANGE 45-380 kPa 145 180 140 160 185 145 140 150 190 150 195 155 155 200 170 175 160 160 205 210 170 170 180 175 215 185 190 180 195 185 200 175 190 195 180 205 210 200 185 205 2’’ to 3’’ cartridge information is available on request Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 6 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALANCING VALVES - STATIC Flow Measurement Device (FMD) D901/D902 PN25 Specification D901 & D902 Flow Measurement Devices have square edged entrance orifice plates with tappings for P84 insertion style test points. Flow measurement accuracy of ±3%. D901 - Sizes 1/2|| to 2|| Inlet - BS EN 10226 formerly BS21 (ISO 7 ) taper female Outlet - BS EN 10226 formerly BS21 (ISO 7) taper male D901/D902 - Sizes 1/2|| Inlet - (ISO 228) parallel female supplied with compression adaptor to suit 15mm BS EN 1057: Half hard R250 copper tube. Outlet - BS EN 10226 formerly BS21 (ISO 7) taper male. Discard adaptor if connecting steel pipe. D901 Application D901 Flow Measurement Devices are suitable for systems where pipes have been sized on the basis that pipe frictional losses lie in the range 100 to 400 Pa/m. D902 Flow Measurement Device (1/2||/15mm size only) is suitable for the measurement of ultra low flows in the range 0.015 to 0.06 l/s e.g. flows to fan coil units. Please note: The fitting of P82 test points will give an increased temperature rating of 180°C. Dimensional Drawing A1 A Conforms to BS7350*: 1990 B Materials Pressure/Temperature Ratings PART MATERIAL SPECIFICATION Body and Integral orifice DZR copper alloy BS EN 12165 CW602N P84 Pressure test point DZR copper alloy BS EN 12164 CW602N Threaded TEMPERATURE (°C) 110 120 25 23.4 21.8 -10 to 30 65 120 16 10 5 PRESSURE (BAR) Compression TEMPERATURE (°C) Dimensions, Coefficients and Weights -10 to 100 PRESSURE (BAR) CAT. NO. D901 NOM. SIZE 1 || 2 CENTRETO-TOP FLOW HEAD LOSS A (mm) A1 (mm) B (mm) (Kv) (K) Kvs WEIGHT (kg) Intermediate pressure ratings shall be determined by interpolation Maximum temperature 120°C / DN15 57 66 55 2.8 13.5 2.2 0.29 /4|| DN20 58 - 61 6.1 9.1 4.7 0.30 1|| DN25 66 - 65 11.9 6.1 8.6 0.40 Note: In line with BS EN 1254/2, the maximum pressure must not exceed 16 bar when using compression adaptors. 11/4|| DN32 72 - 71 23.4 4.8 16.6 0.50 *Except pressure rating exceeds BS. 11/2|| DN40 72 - 73 36.2 3.7 24.5 0.54 2|| DN50 82 - 79 71.6 2.4 46.1 0.77 /2|| DN15 57 66 55 0.57 333 0.54 0.29 3 D902 END TO END 1 Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 7 BALANCING VALVES - STATIC Flow Measurement Device (FMD) DM900 PN25 Specification DM900 is a stainless steel orifice plate which has a square edged entrance. The two stainless steel extension tubes are fitted with Crane P84 pressure test points. Accuracy of flow measurement at normal velocities is ±3%. Application DM900 can be used as a single unit or close coupled to other regulating or isolating valves to provide accurate flow measurement. Suitable for use with PN10. PN16, or PN25 flanges or flanged valves with ratings detailed in the appropriate flange or valve product standard. When fitted with P84 pressure test points, the DM900 is limited to 120°C max. For use at temperatures above 120°C, suitable alternative pressure test points should be fitted. For temperatures between 120-180°C, replace P84 with P82. Please consult Crane Fluid Systems’ technical team for more information. DM900 Dimensional Drawing B Installation The DM900 can be mounted between valve and/or pipe flanges to BS EN 1092-1+2 with PN10, PN16 or PN25 ratings. The outside diameter ensures a proper alignment when installed between PN10/16 flanges and PN25 flanges up to 80mm size. When assembling between PN25 flanges sized 100mm and larger, ensure the device has been correctly centered with the mating flanges. C A Conforms to BS7350: 1990* Materials Pressure/Temperature Ratings MATERIAL TEMPERATURE (°C) Orifice and carrier Stainless steel PRESSURE (BAR) Extension tubes Stainless steel Pressure test points (P84) DZR PART Dimensions and Weights DN FACE-TO-FACE A (mm) 25.0 Coefficients CENTRE-TO-TOP B (mm) 20 18 25 18 32 18 40 18 50 18 65 18 80 18 100 18 125 18 150 18 200 18 250 18 300 18 350 21 400 21 450 21 500 21 600 25 *Larger sizes available on application. -10 to 120 OUTSIDE DIAMETER C (mm) 116 119 124 127 131 114 120 127 137 147 167 187 207 216 235 256 278 319 *Except pressure rating 63 73 84 94 109 129 144 164 194 220 275 331 386 444 495 555 617 734 exceeds BS. WEIGHT (kg) DN FLOW (Kv) HEADLOSS (K) KVS 0.7 0.8 1.0 1.1 1.4 1.5 1.8 2.2 2.6 3.0 4.4 5.7 7.1 12.4 14.5 18.0 22.1 36.1 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600 6.0 11.6 23 35 72 154 220 373 570 789 1383 2122 3116 2754 3573 4583 5686 8229 9.6 6.6 5.1 4.0 2.5 1.5 1.4 1.4 1.4 1.5 1.6 1.7 1.6 2.6 2.6 2.6 2.6 2.6 4.7 8.6 16.6 24.5 46.1 90 120 220 342 468 792 1224 1800 1795 2334 2981 3700 4491 Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 8 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALANCING VALVES - STATIC Double Regulating Valve (DRV) D921/D923 PN25 Specification The Double Regulating Valve offers an accuracy of ± 5% on all settings, for precise flow regulation. They are Y-pattern globe valves with characterised throttling disc tending towards equal percentage performance. Double regulating feature allows valve opening to be set with an Allen key. Operation of the valve is by means of the Microset hand wheel. WRAS Approved. End Connection Sizes 1|| to 2|| taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21. Sizes 1/2|| & 3/4|| DN15 & DN20 parallel threaded to BS EN ISO 228-1 (formerly BS 2779). Adaptor kits for use with copper tube also available. D921 Dimensional Drawing Also available threaded to ANSI B1.20.1. Please add suffix AT to denote American Thread i.e. D921AT/D923AT A (all sizes) Application In two unit systems, the D921 has sufficient authority to give effective regulation over the range of flows covered by matching flow measurement devices/valves. B In particular, the D923 low flow regulating valve has an authority matched to the range of ultra low flows covered by the D902 flow measurement device. Conforms to BS 7350* : 1990 Materials PART MATERIAL SPECIFICATION Body Bonnet Stem Disc 'O' Ring Seal Hand Wheel Bronze DZR copper alloy DZR copper alloy DZR copper alloy EPDM Rubber Plastic BS BS BS BS EN EN EN EN 1982 CC491K 12165 CW602N 12165 CW602N 12165 CW602N Pressure/Temperature Ratings Threaded TEMPERATURE (°C) Dimensions, Coefficients and Weights -10 to 100 110 120 25 23.4 21.8 -10 to 30 65 120 16 10 5 PRESSURE (BAR) DIMENSIONS (mm) FIG. NO. D921 NOM. SIZE A B FLOW (Kv) HEAD LOSS (K) WEIGHT (kg) /2|| DN15 87 105 2.14 23.11 0.54 /4|| DN20 96 106 3.61 26.14 0.58 1 3 D923 FULLY OPEN Compression TEMPERATURE (°C) PRESSURE (BAR) 1|| DN25 100 127 6.37 21.45 0.88 Intermediate pressure ratings shall be determined by interpolation. 1 1/4|| DN32 114 128 12.30 17.42 1.05 Maximum temperature 120°C 1 1/2|| DN40 125 143 21.30 10.66 1.43 2|| DN50 146 144 31.30 12.63 1.88 /2|| DN15 Note: In line with BS EN 1254/2 the maximum pressure must not exceed 16 bar when using compression adaptors 87 105 2.26 20.72 0.54 1 *Except pressure rating which exceeds BS Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 9 BALANCING VALVES - STATIC Fixed Orifice Double Regulating Valve (FODRV) D931/D933/D934 PN25 Specification The Double Regulating Valve, with its integral fixed orifice design, offers an accuracy of ± 5% on all settings, for precise flow regulation and measurement. They are Y-pattern globe valves having characterised throttling disc tending towards equal percentage performance. Integral square edged entrance orifice plate and P84 insertion test points fitted. Double regulating feature allows valve opening to be set with an Allen key. Operation of the valve is by means of the Microset hand wheel. The Double Regulating feature allows the valve to be used for isolation and to be re-opened to its pre-set position to maintain required flow rate. End Connection D931 Sizes 1 to 2 taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21. Sizes 1/2|| & 3/4|| DN15 & DN20 BS 2779 (ISO 228) parallel Adaptor kits for use with copper tube also available Also available threaded to ANSI B1.20.1AT Order code D931AT/D933AT/D934AT || || Dimensional Drawing A Application D933 size 1/2|| low flow FODRV combines the functions of regulation and flow measurement in a unit of high authority making it particularly suitable for low flow applications in the range of 0.03 to 0.07 I/s. D934 size 1/2|| ultra low flow FODRV combines the functions of regulation and flow measurement in a unit of high authority making it particularly suitable for ultra low flow applications in the range of 0.016 to 0.04 I/s. B Conforms to BS 7350* : 1990 Materials PART MATERIAL SPECIFICATION Body Bonnet Stem Disc ‘O’ Ring Seal Orifice Insert P84 test valve Hand Wheel Bronze DZR copper alloy DZR copper alloy DZR copper alloy EPDM Rubber DZR copper alloy DZR copper alloy Plastic BS BS BS BS EN EN EN EN 1982 CC491K 12165 CW602N 12164 CW602N 12164/5 CW602N BS EN 12164 CW602N BS EN 12164 CW602N Pressure/Temperature Ratings Threaded TEMPERATURE (°C) Dimensions, Coefficients and Weights DIMENSIONS (mm) FIG. NO. D931 D933 D934 NOM. SIZE /2|| DN15 3 || /4 DN20 1|| DN25 11/4|| DN32 11/2|| DN40 2|| DN50 1 || /2 DN15 1 || /2 DN15 1 -10 to 100 110 120 25 23.4 21.8 -10 to 30 65 120 16 10 5 PRESSURE (BAR) FULLY OPEN A B FLOW (Kv) 87 96 100 114 125 146 87 87 105 106 127 128 143 144 105 105 1.87 3.14 5.59 10.80 18.10 29.10 1.06 0.57 HEAD LOSS (K) KVs WEIGHT (kg) 30.27 34.55 27.85 22.60 14.76 14.62 94.20 325.8 2.2 4.7 8.6 16.6 24.5 46.1 1.1 0.58 0.61 0.65 0.95 1.13 1.52 1.98 0.61 0.61 Compression TEMPERATURE (°C) PRESSURE (BAR) Intermediate pressure ratings shall be determined by interpolation. Maximum temperature 120°C Note: In line with BS EN 1254/2, the maximum pressure must not exceed 16 bar when using compression adaptors *Except pressure rating exceeds BS Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 10 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALANCING VALVES - STATIC Fixed Orifice Double Regulating Valve (FODRV) MotoBalance D981P/D983P/D984P PN16 Specification Y-pattern globe valve. Integral square edged entrance orifice plates and P84 insertion test points fitted. Double regulating feature allows valve opening to be manually set. Operation of the valve is by means of motorised actuator. MotoBalance should be fitted with a suitable actuator. These include thermal actuators for on/off control specified ‘normally open or normally closed’ with either 24V or 230V supply. Alternatively use with a fully modulating control actuator that requires a 24V supply and a control signal 0-10V. The Double Regulating feature allows the valve to be used for isolation and to be re-opened to its pre-set position to maintain required flow rate. D981P D981 DN20 MotoBalance 100 RTC 90 End Connection 80 70 60 Flow % Kv Sizes 1/2|| and 3/4|| DN15 & DN20 parallel threaded to BS EN ISO 228-1 (formerly BS 2779). All sizes also available threaded ANSI B1.20.1. Please add suffix AT to denote American Thread. D981 DN20 50 Fan Coil Characteristics 40 30 Application 20 The MotoBalance valve is designed for installation in circuits where combined functions of actuated regulation and flow measurement are required. Accuracy of flow measurement is ± 5% across all drive settings. D981P - The 1/2|| MotoBalance has a flow range of 0.061 to 0.132 l/s. The 3/4|| MotoBalance has a flow range of 0.131 to 0.289 l/s. D983P - 1/2|| low flow MotoBalance is particularly suitable for low flow applications in the range of 0.03 to 0.07 l/s. D984P - 1/2|| ultra low flow MotoBalance is particularly suitable for ultra low flow applications in the range of 0.016 to 0.04 l/s. Theoretical (k=20) 10 0 0 10 20 30 40 50 60 70 80 90 100 Valve % Open Position Suitable for actuation Profiled disc gives equal percentage flow control Materials PART MATERIAL SPECIFICATION Body Bonnet Stem Disc ‘O’ Ring Seal Orifice Insert P84 Test Point Bronze DZR copper alloy DZR copper alloy EPDM rubber EPDM rubber DZR copper alloy DZR copper alloy BS EN 1982 CC491K BS EN 12165 CW602N BS EN 12165 CW602N BS 4518 0056-024 BS EN 12165 CW602N BS EN 12165 CW602N FIG. NO. D981P D983P D984P NOM. SIZE /2|| 3 || /4 1 || /2 1 || /2 1 DN15 DN20 DN15 DN15 A C B 87 96 87 87 50 51 50 50 46 51 46 46 1.245 2.300 0.667 0.587 Threaded TEMPERATURE (°C) -10 to 100 110 120 16.0 14.8 13.5 -10 to 30 65 120 16 10 5 Compression FULLY OPEN FLOW (Kv) The maximum static pressure is 16 bar, the maximum differential pressure is 1.2 bar. Maximum working temperature: 120°C Minimum working temperature: -10°C PRESSURE (BAR) Dimensions, Coefficients and Weights DIMENSIONS (mm) Pressure/Temperature Ratings TEMPERATURE (°C) HEAD LOSS (K) KVs WEIGHT (kg) 30.27 34.55 90.42 325.80 2.2 4.7 1.1 0.58 0.41 0.45 0.41 0.41 PRESSURE (BAR) Intermediate pressure ratings shall be determined by interpolation. Note: In line with BS EN 1254/2 the maximum pressure must not exceed 16 bar when using compression adaptors Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 11 BALANCING VALVES - STATIC Double Regulating Valve (DRV) DM921 PN16 Specification Y-pattern globe valve with a characterised throttling disc and ends flanged to BS EN 1092-2 PN16. The valve opening may be set to control flow at a pre-determined rate. Operation of the valve is by means of a hand wheel incorporating a micrometer device. The Double Regulating feature allows the valve to be used for isolation and to be re-opened to its pre-set position to maintain required flow rate. Application In two unit systems, the DM921 has sufficient authority to regulate flow in circuits incorporating a flow measurement device. Fitted with 2 x 1/4|| BSPT plugs for conversion to DM931 if required. Conform to BS 7350 : 1990* DM921 Dimensional Drawing Materials PART MATERIAL Body Ductile Iron Bonnet Ductile Iron Bonnet gasket Non-asbestos Disc (All sizes) EPDM Coated Cast Iron Disc Bush Bronze Stem 410 SS Gland (65 to 150mm) Brass Gland (200 to 300mm) Cast Iron Gland nut Brass Packing Non-asbestos Seat ring Bronze Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 120 16.0 Ratings align with BS EN 1092-2 PN16 (formerly BS4504) Dimensions and Weights Coefficients* DN FACE-TO-FACE A (mm) CENTRE-TO-TOP B (mm) WEIGHT (kg) DN 65 290 262 15.8 80 310 267 19.5 100 350 300 125 400 150 480 200 FLOW (Kv) HEADLOSS (K) 65 85 4.9 80 111 5.5 28.0 100 146 9.2 325 37.5 125 250 7.3 340 50.5 150 380 6.5 600 525 123.0 200 600 7.8 250 730 575 192.0 250 1211 4.6 300 850 645 251.0 300 1521 6.0 * Except pressure rating exceeds BS * Fully open position Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 12 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALANCING VALVES - STATIC Variable Orifice Double Regulating Valve (VODRV) DM931 PN16 DA931 Class 125 Specification These are Y-pattern globe valves supplied with two pressure test points P84 to provide flow measurement, regulation and isolation. Valves conform to requirements of BS 7350: 1990 and ends are flanged to BS EN 1092-2 (formerly BS 4504). Application Primarily used in injection or other circuits requiring a double regulating valve for system balancing. Accuracy of flow measurement is ±10% at the full open position of the valve. Some reduction in accuracy occurs at partial openings of the valve in accordance with BS 7350. The Double Regulating feature allows the valve to be used for isolation and to be re-opened to its pre-set position to maintain required flow rate. DM931 Dimensional Drawing Materials PART MATERIAL Body Ductile Iron Bonnet Ductile Iron Bonnet gasket Non-asbestos Disc (All sizes) EPDM Coated Cast iron Disc Bush Bronze Stem 410 SS Gland (65 to 150mm) Brass Gland (200 to 300mm) Cast Iron Gland nut Brass Packing Non-asbestos Seat ring Bronze Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 120 16.0 Ratings align with BS EN 1092-2 PN16 (formerly BS4504) Dimensions and Weights Coefficients* DN FACE-TO-FACE A (mm) CENTRE-TO-TOP B (mm) WEIGHT (kg) 65 290 262 15.8 65 85 4.9 80 310 267 19.5 80 111 5.5 100 350 300 28.0 100 146 9.2 125 400 325 37.5 125 250 7.3 150 480 340 50.5 150 380 6.5 200 600 525 123.0 200 600 7.8 250 730 575 192.0 250 1211 4.6 300 850 645 251.0 300 1521 6.0 DN FLOW (Kv) HEADLOSS (K) * Fully open position Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 13 BALANCING VALVES - STATIC Fixed Integral Orifice Double Regulating Valve (FODRV) DM941 PN16 DA941 Class 125 Specification Single unit Y-pattern globe valves incorporating an integral orifice plate to form a fixed orifice flow measurement unit with regulation and isolation capacity. Valves conform to requirements of BS 7350: 1990 and ends are flanged to BS EN 1092-2 (formerly BS 4504). Application Primarily used in injection or other circuits requiring a double regulating valve for system balancing. Accuracy of flow measurement is ±5% at all open positions of the valve in accordance with BS 7350 : 1990. The Double Regulating feature allows the valve to be used for isolation and to be re-opened to its pre-set position to maintain required flow rate. DM941 Dimensional Drawing Materials PART MATERIAL Body Ductile Iron Bonnet Ductile Iron Bonnet gasket Non-asbestos Disc (All sizes) EPDM Coated Cast Iron Disc Bush Bronze Stem 410 SS Gland (65 to 150mm) Brass Gland (200 to 300mm) Cast Iron Gland nut Brass Packing Non-asbestos Seat ring Bronze Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 120 16.0 Ratings align with BS EN 1092-2 PN16 (formerly BS4504) Dimensions and Weights Coefficients* DN FACE-TO-FACE A (mm) CENTRE-TO-TOP B (mm) WEIGHT (kg) DN FLOW (Kv) HEADLOSS (K) 65 290 262 16.3 65 93 6.9 90 80 310 267 20.0 80 99 6.8 120 100 350 300 28.5 100 136 12.7 220 125 400 325 38.0 125 229 8.7 342 150 480 340 51.0 150 342 8.9 468 200 600 525 124.0 200 550 10.3 792 250 730 575 194.0 250 1052 6.0 1224 300 850 645 254.0 300 1367 7.8 1800 Kvs * Fully open position Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 14 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALANCING VALVES - STATIC Gearbox Operated Double Regulating Valve DM925G PN16 DM925L PN16 Specification The DM925G and DM925L Double Regulating Valves consist of a fully lugged, EPDM liner butterfly valve with a Double Regulating Gearbox or Lever. The gearbox Double Regulating feature allows the valve to be used to isolate and to be re-opened to its pre-set position. The Double Regulating feature allows the valve to be used for isolation and to be re-opened to its pre-set position to maintain required flow rate. Installation As an alternative to the DM921, the DM925G and DM925L can be used in conjunction with a flow measurement device to measure flow. Dimensional Drawing C DIA. DM925G G F A Dimensional Drawing K I B Materials D H PART MATERIAL SIZES Body Ductile Iron ASTM A536 65-45-12 Disc Aluminium Bronze All Seat EPDM All Shaft Stainless Steel ASTM A532 Type 416 All J All L Taper Pin Stainless Steel ASTM A276 Type 316 All Key Carbon Steel All ‘O’ Ring Nitrile (Buna) All TEMPERATURE (°C) Shaft Bushing PTFE or Bronze All PRESSURE (BAR) Pressure/Temperature Ratings Dimensions and Weights -10 to 130 16.0 Coefficients* DN WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) F (mm) G (mm) H (mm) I (mm) J (mm) K (mm) L (mm) 50 8.6 162 80 150 42 45 54 158 195 83 260 65 9.1 175 89 150 45 45 54 158 207 95 260 80 11.8 181 95 150 45 45 54 158 213 102 100 17.2 200 144 150 52 45 54 158 232 125 18.1 213 127 200 54 45 54 148 150 19.5 225 139 200 56 45 54 200 29.5 260 175 300 61 78 250 39.9 292 203 300 66 300 54.9 337 242 300 350 61.0 406 260 400 94.0 447 290 DN FLOW (Kv) HEADLOSS (K) 44 50 100 1.216 48 65 170 0.856 260 48 80 261 0.856 124 260 54 100 519 0.650 245 137 260 57 125 884 0.553 148 256 150 266 57 150 1142 0.483 81 226 – – – – 200 1873 0.367 78 81 226 – – – – 250 2900 0.315 77 78 81 226 – – – – 300 5079 0.266 300 78 78 81 226 – – – – 350 10274 0.129 450 86 120 130 277 – – – – 400 14129 * Fully open position 0.116 Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 15 BALANCING VALVES - STATIC Gearbox Operated Flow Measurement & Regulating Valve DM950G PN16 DM950L PN16 Specification The DM950G and DM950L consist of a DM925G/L coupled with a fixed orifice flow measurement device using a spool piece connector, to form a fixed orifice flow measurement unit with regulation and isolation capability. Test points are supplied loose. Installation The DM950G and DM950L is supplied ready assembled to site. Suitable gasket and bolting should be provided by the contractor/installer. Dimensional Drawing C DIA. G B F D DM950G Dimensional Drawing A K H Materials MATERIAL SIZES Extension piece Steel DIN 17100 R.St.37.2/ASTM A53.Gr.A 150-400mm Extension piece Steel DIN 17100 R.St. 37.2 50-125mm P84 Test Valve See Fig No P84 I PART Orifice Plate Retain Steel DIN 17100 R.St. 37.2 All Orifice Plate Stainless steel BS970 316S31 All J All L Orifice Plate Gasket Asbestos free All Flange Bolts Steel BS3692 Gr. 8.8 All DM925G See Fig No DM925G Gear Operated All Test Point Extension DZR Brass BS EN 12164 CW602N All Test Point Adaptor DZR Brass BS EN 12164 CW602N 50-125mm Pressure/Temperature Ratings TEMPERATURE (°C) Socket Head Cap Screw Steel BS4168 Gr. 12.9 All -10 to 120 PRESSURE (BAR) 16 Note: 350mm and 400mm limited to 110°C Dimensions and Weights Coefficients* SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) F (mm) G (mm) H (mm) I (mm) J (mm) K (mm) L (mm) 50 19.7 162 80 150 158 45 54 158 65 20.8 175 89 150 161 45 54 158 194 83 260 132 95 206 150 260 80 23.4 181 95 150 171 45 54 158 213 102 260 165 100 32.5 200 114 150 181 45 125 38.4 213 127 200 190 45 54 158 232 124 260 54 148 244 137 260 150 47.1 225 139 200 232 45 54 148 257 150 200 67.8 260 175 300 250 89.2 292 203 300 287 78 81 226 – 345 78 81 226 – 300 124.2 337 242 350 170 406 260 300 404 78 81 226 300 451 78 81 226 400 250 447 290 450 511 120 130 277 DN FLOW (Kv) HEADLOSS (K) Kvs 50 58 3.4 46.1 65 114 2.6 90 80 168 2.3 120 192 100 303 2.0 220 219 125 479 1.8 342 260 246 150 649 1.8 468 – – – 200 1113 1.6 792 – – – 250 1713 1.6 1224 – – – – 300 2656 1.5 1800 – – – – 350 2754 1.3 1795 – – – – 400 3573 1.3 2334 Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 16 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALANCING VALVES - STATIC Gearbox Operated Double Regulating Valve DM975G PN25 to BS EN 593 : 2009 Specification The DM975G Double Regulating Butterfly Valves consist of: • • • A fully lugged butterfly valve for use with PN25 flanges. High temperature EPDM liner for applications up to 120°C. A Double Regulating Gearbox as standard. The Double Regulating feature allows the valve to be used for isolation and to be re-opened to its pre-set position to maintain required flow rate. Installation The DM975G can be used in conjunction with a flow measurement device DM900 to regulate and measure flow. Pressure/Temperature Ratings TEMPERATURE (°C) DM975G -10 to 120 PRESSURE (BAR) Also available with lever version 25 Dimensional Drawing Materials ITEM PART MATERIAL 1 Body Ductile Iron BS EN 12563 EN GJS 500/7 2 Plug Carbon Steel 3 Liner EPDM 4 Shaft (Lower) Steel - AISI 431 5 Disc Stainless Steel - SS304 6 Shaft (Upper) Steel - AISI 431 7 O Ring EPDM 8 Lock Plate Brass - ASTM B16 C36000 9 Snap Ring Carbon Steel 10 Gearbox Coefficients* Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) H (mm) D (mm) E (mm) L (mm) K (mm) N-M (mm) H1 (mm) DN FLOW (Kv) HEADLOSS (K) 50 10.0 140 68 35 90 43 160 125 4-M16 172.5 50 85 1.86 65 10.8 152 76 35 90 45 160 145 8-M16 184.5 65 204 0.95 80 11.0 160 85 35 90 46 160 160 8-M16 192.5 80 370 0.50 100 13.0 180 100 35 90 51.5 160 190 8-M20 212.5 100 820 0.29 125 16.0 191 120 35 90 56 160 220 8-M24 223.5 125 982 0.37 150 18.5 202 132 35 90 56.5 160 250 8-M24 234.5 150 1353 0.43 200 29.8 241 160 45 125 60 238 310 8-M24 278.0 200 2923 0.31 250 40.0 274 200 45 125 68.5 238 370 12-M27 311.0 250 3374 0.56 300 53.0 315 230 45 125 79.5 238 430 16-M27 366.0 300 6350 0.33 * Fully open position Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 17 BALANCING VALVES - STATIC Pressure Test Valve P82/ Extension Tube P83 / Pressure Test Point P84 Pressure Test Points P84 Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 P84 insertion style pressure test points are fitted as standard to Crane flow measurement and regulation valves. Materials PART MATERIAL SPECIFICATION Cap DZR copper alloy BSEN12164 CW602N Cap Washer EPDM Body DZR copper alloy Tie Polypropylene Seal EPDM Retaining Ring DZR copper alloy P84 BSEN12164 CW602N WEIGHT BSEN12164 CW602N 0.025kg PRESSURE RATING PN25 MAX. TEMP. 120°C Extension Tube P83 Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 P83 pressure test point extension tubes allow Crane valves to be insulated to a thickness of 2|| without the test points being covered. 66.5 11.3 17 Materials PART MATERIAL SPECIFICATION P83 DZR copper alloy BSEN12164 CW602N P83 Pressure Test Valve P82 Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 Pressure test valve P82 is suitable for use in LTHW and MTHW systems. A conventional needle valve, operated by a standard radiator aircock key, is backed by a spring loaded self-sealing ball unit to provide double sealing. The double sealing facility offers maximum operational safety in accordance with the Health & Safety at Work legislation. It also makes it possible, with the valve closed to pipeline pressure, to clear the ball seat of any pipeline debris. Although P82 is also suitable for use in HTHW systems it should not be operated while such a system is ‘live’. For ‘live’ HTHW systems copper bleed tubes should be taken from the valves and terminated in needle valves, e.g. Crane D71 or D72. The manometer connection on the valve accepts a Mechseal adaptor. When not in use a screw cap protects the connection from dust. Materials PART MATERIAL Body DZR Stem DZR P82 Shield Brass ‘O’ Ring Viton Adaptor DZR Ball Stainless Steel WEIGHT 0.07kg Spring Stainless Steel PRESSURE RATING PN40 MAX. TEMP. 182°C Dust Cap Brass Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 18 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com COMMPAC CommPac Manifold Commissioning System Crane CommPac provides one easy access point for commissioning and maintenance of multiple heating/chilled water terminal units. Materials PART MATERIAL H – Body Bronze (Z3000) Strainer Bronze (D297) Manifolds Bronze Isolation Valves DZR Brass (D171A) Regulation Valves Bronze (D931 or D981P Series) Maximum pressure 16 bar Temperature rating -10 to 100°C Dimensions & Weights OUTLETS LENGTH HEIGHT & INLETS (mm) (mm) WIDTH (mm) WEIGHT (kg) 6x6 1120 250 290 40 5x5 1120 250 290 38 4x4 880 250 290 36 3x3 880 250 290 34 2x2 640 250 290 30 Units with outlets and inlets on same side Dimensions & Weights OUTLETS LENGTH HEIGHT & INLETS (mm) (mm) On large projects, significant time and cost can be eliminated by enabling commissioning at convenient locations. Ends of corridors, or accessible cupboards can be used, which would also eliminate disruption to occupiers during maintenance works. WIDTH (mm) WEIGHT (kg) 6x6 1120 200 400 40 5x5 1120 200 400 38 4x4 880 200 400 36 3x3 880 200 400 34 2x2 640 200 400 30 Units with outlets and inlets on opposite side Typical Schematic The CommPac is an exceptionally robust, efficient, practical and versatile system: • Depending on flow rates, up to six terminals can be served from a single CommPac unit. • All units are custom built to suit site specification. • All site connections can be made without the need to access the internal components. • CommPac is suitable for variable flow or constant flow systems. • All connections are BSPT Female, enabling standard pipe or specialist adapters to be used. • Fan coil units can be flushed, vented and balanced without the timeconsuming 'looping out' procedure. This can be carried out by one commissioning engineer instead of a team. • A single strainer serves all circuits, eliminating the need for individual strainers. • All systems can be flushed through the unique Dominator ‘H’ body. • The single DPCV maintains constant differential pressure between manifolds. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 19 COMMPAC CommPac Manifold Commissioning System Mounting plate for manifold Insulated box for Heating or Chilled Return Balancing Valves DPCV for Variable flow systems Flow Isolation Valves All connections accessible without entering box Strainer Unique H-Body for flushing CommPac modules are built to suit individual project design requirements. Correct selection of balancing valves and differential pressure control valves is essential to ensure comfort control and system efficiency. To streamline this selection process we have developed software that allows all variables to be considered and best valve options selected. The selection programme is used by Crane Sales/Technical staff to input customer information throughout the design process and ensure that the optimum design is achieved. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 20 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com DPCV Differential Pressure Control Valves DPAF951 Flow DPAR951 Return To meet the growing use of variable speed pumps for HVAC applications, Crane Fluid Systems has launched a range of Differential Pressure Control Valves (DPCV) specifically aimed at optimising system performance. Extremely efficient, the DPCV is set to a maximum differential pressure which ensures flow cannot exceed a desired rate. It therefore helps reduce energy consumption, the risk of noise and simplifies the commissioning process. Materials ITEM DESCRIPTION MATERIAL 1 Body Bronze BS EN 1982 (CC491K) 2 Bonnet Bronze BS EN 1982 (CC491K) 3 Chamber Bronze BS EN 1982 (CC491K) 4 Adjuster Nylon Grade PA6 INT Stem / Piston Stainless Steel BS EN 10088 - 1: 2005 INT Diaphragm Rubber EPM INT O-Ring Seals Rubber EPDM DPCV Dimensions and Weights SIZE A B END CONNECTION (mm) (mm) WEIGHT (kg) See diagrams for item numbers DN15 90 175 3/4|| BSP Parallel Male 2.34 INT denotes an internal component not visible on these drawings DN20 96 175 1|| BSP Parallel Male 2.39 DN25 114 185 1 1/4|| BSP Parallel Male 2.62 DN32 132.5 190 1 1/2|| BSP Parallel Male 2.76 DN40 150.5 195 1 3/4|| BSP Parallel Male 3.07 DN50 2 3/8|| BSP Parallel Male 3.57 Dimensional Drawing 184 205 Male and female tailpieces are available - please contact Crane Fluid Systems Flow Configuration Return Configuration Top View Top View Flow Configuration Return Configuration Flow & Return Configuration Front View Front View Side View Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 21 DOMINATOR® Dominator® Z3000 PN16 Flow Management system for terminal units The Z3000 is a prefabricated unit combining the essential control components and connecting pipework associated with terminal units, into one compact, fully assembled unit ready for simple and fast onsite connection. Features and Benefits The Dominator is compact and lightweight • The complete unit is factory tested • 80mm supply/return centres allow for ease of lagging • Easy to install The unique bypass valve unit comprising two T-ported ball valves • Allows easy back flushing, forward flushing and isolation • The position of the T-handle gives clear indication of flow/bypass mode • Designed around 3/4|| full bore ball for optimum flow • Can be adapted to 1/2||, 3/4|| and 1|| end connections • Simple attachment to existing hangers Z3000 The strainer unit has an integral drain cock and pressure test point • Enabling measurement of pressure drop across load • Allowing for flushing of strainer and coil without need to remove basket Benefits for Design Engineers • minimal design involvement • all the necessary components supplied as one tested unit • no risk of a component being omitted from a system at installation • known performance of the entire unit • saves time, reduces specification risks and provides maximum value to the client • reduces envelope space Benefits for Installing Contractors • Significant reduction in site labour and installation costs • fast connection of one complete assembly • standardised components with guaranteed tested performance • less purchase orders, minimal administration • simple on-site connection Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21. Materials Pressure/Temperature Ratings Threaded DESCRIPTION MATERIAL Bypass valve Bronze to BS EN 1982 CC491K D931 Refer to page 5 D299P strainer Bronze to BS EN 1982 CC491K Union Brass to BS EN 12165 CW617N P84 test points DZR to BS EN 12164 CW602N Drain cock DZR to BS EN 12164 CW614 TEMPERATURE (°C) -10 to 120 PRESSURE (BAR) 16.0 Maximum temperature 120°C Compression TEMPERATURE (°C) PRESSURE (BAR) -10 to 30 65 120 16 10 5 Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 22 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com DOMINATOR® Dominator® Z3000 PN16 Flow Management system terminal coil units The Dominator range consists of three series: Z3000 series features the Crane ProBalance Fixed Orifice Double Regulating valve D931. Z3900 series features the Crane MotoBalance Fixed Orifice Double Regulating valve D981P, suitable for use with actuator. Z3300 series features the Crane Pressure Independent Control Valve- see page 22 for details. Both series provide versions for heated and chilled water systems and combinations with and without drains and strainers.The versions for chilled water systems include extension stems (EXS) on the ball valve T-handles to allow for lagging. The Z3000 series also includes low flow and ultra low flow versions. Z3000 Series comprises the three variants as shown below. Z3000 with drain and strainer Z3010 without drain and strainer Z3020 with drain but without strainer This series utilises the Crane bronze commissioning valves D931, D933 or D934 depending on flow rate required. All selections are made by Crane and each unit is tagged with individual fan coil reference numbers to assist contractors with site installation. Extension stems are fitted to isolation ball valves for chilled water applications. Z3900 Series comprises the three variants as shown below. Z3900 with drain and strainer Z3910 without drain and strainer Z3920 with drain but without strainer This series utilises the Crane motorised commissioning valves D981P, D983P or D984P depending on flow rate required. The MotoBalance offers on/off or modulating control with equal percentage characteristics. All selections are made by Crane and each unit is tagged with individual fan coil reference numbers to assist contractors with site assembly. Extension stems are fitted to isolation ball valves for chilled water applications. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 23 Pressure Independent Control Valves Combines all required functions - flow regulation & measurement, as well as 2 port & differential pressure control for terminal units • Unique flow measurement for accurate commissioning and trouble shooting • Pre-set flow rates • Reacts to system changes to maintain stable low rates • Equal % control characteristic ensures improved system control • Removable cartridge for flushing, complies with CIBSE & BSRIA recommendation • Also available as part of the Dominator flow management system DPIC991* Details available on request 24 Dominator with DPIC991* *PICV and Actuator sold separately TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALL VALVES D171 / D171EXS PN25 D171 Bronze Ball Valve D171EXS Extended Stem Bronze Ball Valve Crane D171 Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the D171 and D171EXS are WRAS approved. Materials PART MATERIAL Body Bronze BS EN 1982 CC491K All Seat Retainer Bronze BS EN 1982 CC491K All Ball DZR Brass BS EN 12165 CW602N All Seat Ring PTFE All Stem DZR Brass BS EN 12164 CW602N All Packing PTFE Gland Nut DZR Brass BS EN 12164 CW602N Lever Mild Steel (Zinc Plated) Screw Mild Steel (Zinc Plated) All Lever Cover P.V.C. All Extension Housing Aluminium D171EXS Extension Stem Brass BS EN 12164 CW602N D171EXS D171 SIZES All 1/4 - 2|| All D171EXS Dimensional Drawing Dimensions and Weights A (mm) B (mm) C (mm) C1 (mm) D171EXS D (mm) /4|| 0.15 46 10 39 - 81 /8|| 0.15 46 10 39 - 81 /2|| 0.22 57 15 52 97 92 1 3 1 /4|| 0.45 67 20 58 98 92 1|| 0.69 77 25 66 118 127 11/4|| 1.12 91 32 72 124 127 11/2|| 1.67 103 40 82 142 142 2|| 2.93 122 50 90 149 142 21/2|| 4.98 153 65 117 - 202 3|| 8.75 179 80 132 - 282 3 B BO E WEIGHT (kg) C C1 D SIZE SC E ED BSEN1 BS 1 TA E O ANSI B1. .1 TA E A Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 110 120 186 25.0 23.4 21.8 10.5 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN25 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) SPECIFICATION: Quarter Turn, Tight Shut-Off This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 186°C OPERATOR: Lever Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 25 BALL VALVES D171T / D171LS PN25 D171T T-Handle Bronze Ball Valve D171LS Lockshield Bronze Ball Valve Crane D171 Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the D171T and D171LS are WRAS approved. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Seat Retainer Bronze BS EN 1982 CC491K All Ball DZR Brass BS EN 12165 CW602N All Seats PTFE All Stem DZR Brass BS EN 12164 CW602N All Packing PTFE All Gland Nut DZR Brass BS EN 12164 CW602N ‘T’ Handle Aluminium D171T Screw Steel (Zinc Plated) D171T All Lockshield Cap Brass BS EN 12164 CW617N D171LS Screw Mild Steel D171LS Lockshield Cover Nylon 6 D171LS Dimensions and Weights WEIGHT (kg) 3 || 8 / 0.13 46 10 31 - 38 - /2|| 0.2 57 15 40 48 55 36 /4|| 0.41 67 20 43 51 55 36 1|| 0.64 77 25 53 58 83 39 11/4|| 1.07 91 32 58 63 83 39 11/2|| 1.57 103 40 73 76 108 49 2|| 2.83 122 50 80 84 108 49 3 B (mm) D171LS Dimensional Drawing SIZE 1 A (mm) D171T C (mm) C1 (mm) D171LS D (mm) D1 (mm) D171LS D D1 C C1 B B B Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 110 120 186 25.0 23.4 21.8 10.5 A Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN25 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) SPECIFICATION: End Entry, Quarter Turn, Tight Shut-Off This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 186°C. OPERATOR: T-Handle / Allen key Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 26 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALL VALVES D171MHU / D171MHULS PN25 D171MHU Bronze Draw-Off Valve D171MHULS Bronze Draw-Off Ball Valve with Lockshield Crane D171MHU / D171MHULS Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the D171MHU and D171MHULS are WRAS approved. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Seat Retainer Bronze BS EN 1982 CC491K All Ball DZR Brass BS EN 12165 CW602N-Chrome Plated All Seat PTFE All Stem DZR Brass BS EN 12164 CW602N All Packing PTFE All Gland Nut Brass BS EN 12164 CW617N All Lever Mild Steel (Zinc Plated) D171MHU Lever Screw Mild Steel (Zinc Plated) D171MHU Lever Cover PVC D171MHU D171MHU All Brass BS EN 12165 CW617N All Washer PTFE All Lockshield Cap Brass BS EN 12164 CW617N D171MHULS Lockshield Cover Nylon 6 D171MHULS Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) C1 (mm) D171MHULS D (mm) D1 (mm) D171MHULS /2|| 0.27 104 15 40 47 82 36 /4|| 0.55 124 20 58 51 92 36 || 0.88 147 25 65 58 127 39 1 3 1 D D1 C C1 Brass BS EN 12164 CW617N Hose Union Nut Dimensional Drawing B BO E Hose Connector D171MHULS A Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 110 120 186 25.0 23.4 21.8 10.5 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN25 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: Not Specified OPERATOR: Lever / Allen key SPECIFICATION: End Entry, Quarter Turn, Tight Shut-Off Male x hose union outlet This valve is not suitable for use on Group 1 gasses and unstable fluids as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 186°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 27 BALL VALVES D171C / D171CEXS PN16 D171C Compression Ended Bronze Ball Valve D171CEXS Compression Ended Bronze Ball Valve with Extension Stem Crane D171C / D171CEXS Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the D171C and D171CEXS are WRAS approved. D171C Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Seat Retainer Bronze BS EN 1982 CC491K All Ball DZR Brass BS EN 12165 CW602N (Chrome plated) All Seat Ring PTFE All Stem DZR Brass BS EN 12164 CW602N All Packing PTFE All Gland Nut Brass BS EN 12164 CW617N All Lever Mild Steel (Zinc Plated) D171C Screw Mild Steel (Zinc Plated) D171C Lever Cover PVC D171C Compression Olive Brass BS EN 12449 CW505L/CW507L All Compression Nut DZR Brass BS EN 12165 CW617N All Extension Housing Aluminium D171CEXS Extension Stem DZR Brass BS EN 12164 CW602N D171CEXS Dimensions and Weights D171CEXS Dimensional Drawing D C C1 B SIZE WEIGHT (kg) A (mm) B (mm) C (mm) C1 (mm) D171CEXS D (mm) 15mm 0.27 80 15 52 97 92 22mm 0.51 84 20 58 98 92 28mm 0.78 95 25 65 118 127 35mm 1.19 111 32 70 124 127 42mm 1.82 124 40 83 142 142 54mm 3.28 149 50 91 149 142 A Pressure/Temperature Ratings Compression TEMPERATURE (°C) PRESSURE (BAR) -10 to 30 65 120 16 10 5 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Compression end to suit BS EN 1057: Half Hard R250 copper tube OPERATOR: Lever SPECIFICATION: Quarter Turn, Tight Shut-Off This valve is intended for Group 2 liquids only, as defined by the Pressure Equipment Directive 97/23/EC. Temperature Operating Range: -10 to 120°C Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 28 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALL VALVES D171CT / D171CLS PN16 D171CT Compression Ended T-Handle Ball Valve D171CLS Compression Ended Lockshield Ball Valve Crane D171CT / D171CLS Ball Valves are light, compact units which are easy to install and operate, yet their robust construction ensures long, trouble free service life. In addition the D171CT and D171CLS are WRAS approved. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Seat Retainer Bronze BS EN 1982 CC491K 15mm - 28mm Seat Retainer Bronze BS EN 1982 CC491K 35mm - 54mm Ball DZR Brass BS EN 12165 CW602N All Seat PTFE All Stem DZR Brass BS EN 12164 CW602N All Packing PTFE All Gland Nut Brass BS EN 12164 CW617N All ‘T’ Handle Aluminium D171CT Screw Steel (Zinc Plated) D171CT Compression Olive Brass BS EN 12449 CW505L/CW507L All Compression Nut DZR Brass BS EN 12165 CW617N All Lockshield Brass BS2872 D171CLS Lockshield Cover Nylon 6 D171CLS D171CT D171CLS Dimensional Drawing D D1 Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) C1 (mm) D171LCS D (mm) D1(mm) D171CLS 15mm 0.25 80 15 42 48 55 29 22mm 0.47 84 20 43 51 55 36 28mm 0.73 95 25 53 58 83 39 C C1 B Pressure/Temperature Ratings Compression TEMPERATURE (°C) PRESSURE (BAR) -10 to 30 65 120 16 10 5 A (MIN. HANDTIGHT CONDITION) Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Compression ends to suit BS EN 1057: Half hard R250 copper tube. OPERATOR: T-Handle / Allen Key SPECIFICATION: Quarter Turn, Tight Shut-Off This valve is intended for Group 2 liquids as defined by the Pressure Equipment Directive 97/23/EC. Temperature Operating Range: -10 to 120°C Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 29 BALL VALVES D171A / D171AEXS PN25 D171A Threaded DZR Ball Valve D171AEXS Threaded DZR Ball Valve with Extension Stem Designed to be light, compact and easy to install and operate, Crane's next generation DZR ball valve is WRAS approved and features improved leak resistance and reduced risk of damage from over tightening. Materials PART MATERIAL QUANTITY Hex-Nut Steel Plated 1 Lever Steel Dacromet Plated 1 Sleeve Maroon PVC 1 Packing Nut Brass CW617N 1 Packing Gland PTFE WRAS Approved 1 Body DZR Brass CW602N 1 Seats PTFE WRAS Approved 2 Ball DZR Brass CW602N Chrome Plated 1 O-Ring Rubber EPDM WRAS Approved 1 Bonnet DZR Brass CW602N 1 Stem DZR Brass CW602N 1 Extension Stem Outer Aluminium 1 Extension Stem Inner Steel Plated 1 D171A D171AEXS Dimensions and Weights SIZE WEIGHT (kg) A WEIGHT (kg) AEXS L (mm) L1 (mm) L2 (mm) A H (mm) A H (mm) AEXS /4|| 152 - 45.3 12 89 41 - /8|| 136 - 45.3 12 89 41 - /2|| 205 270 58.5 15.5 98.5 48 103 /4|| 302 366 67 17 98.5 51 107 1|| 511 589 80.5 21 125 62 116 11/4|| 890 1009 94 23 140 77.5 129 11/2|| 1292 1410 102 23 140 83.5 135 2|| 2238 2283 124 26.5 165 97.5 150 1 3 1 3 Pressure/Temperature Ratings Dimensional Drawing All dimensions are nominal. Threaded TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 120 25 21.8 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN25 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) SPECIFICATION: formerly BS 21 Temperature Operating Range: -10 to 120°C Quarter Turn US END CONNECTION: ANSI B1.20.1:1983 (please add suffix AT to denote American Thread) OPERATOR: Lever Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 30 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALL VALVES D171ATH / D171ALS PN25 D171ATH Threaded DZR Ball Valve with T-Handle D171ALS Threaded DZR Ball Valve with Lockshield Designed to be light, compact and easy to install and operate, Crane's next generation DZR ball valve is WRAS approved and features improved leak resistance and reduced risk of damage from over tightening. Materials PART MATERIAL QUANTITY Hex-Nut Steel Plated 1 T-Handle Aluminium AL-46100 Maroon 1 Packing Nut Brass CW617N 1 Packing Gland PTFE WRAS Approved 1 Body DZR Brass CW602N 1 Seats PTFE WRAS Approved 2 Ball DZR Brass CW602N Chrome Plated 1 O-Ring Rubber EPDM WRAS Approved 1 Bonnet DZR Brass CW602N 1 Stem DZR Brass CW602N 1 Lockshield Brass CW617N 1 Lockshield Cover Polypropelene Maroon 1 D171ATH D171ALS Dimensions and Weights SIZE WEIGHT (kg) ATH WEIGHT (kg) ALS L (mm) L1 (mm) /2|| 183 207 59 15.5 /4|| 277 302 67 17 1|| 470 506 80.5 21 55 54 58 11/4|| 809 867 94 23 82 61 67 11/2|| 1210 1269 102 23 82 67 73.5 2|| 2106 2166 124 26.5 110 80.5 86.5 1 3 L2 (mm) ATH H (mm) ATH H (mm) ALS 50 40 42 50 43 45 Dimensional Drawing Pressure/Temperature Ratings Threaded TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 120 25 21.8 Intermediate pressure ratings shall be determined by interpolation All dimensions are nominal. PRESSURE RATING: PN25 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) SPECIFICATION: formerly BS 21. Temperature Operating Range: -10 to 120°C Quarter Turn US END CONNECTION: ANSI B1.20.1:1983 (please add suffix AT to denote American Thread) OPERATOR: T-Handle / Spanner or Socket Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 31 BALL VALVES D171AC / D171ACEXS PN16 D171AC Compression DZR Ball Valve D171ACEXS Compression DZR Ball Valve with Extension Stem Designed to be light, compact and easy to install and operate, Crane's next generation DZR ball valve is WRAS approved and features improved leak resistance and reduced risk of damage from over tightening. Materials PART MATERIAL QUANTITY Hex-Nut Steel Plated 1 Lever Steel Dacromet Plated 1 Handle Sleeve Maroon PVC 1 Packing Nut Brass CW617N 1 Packing Gland PTFE WRAS Approved 1 Body DZR Brass CW602N 1 Seats PTFE WRAS Approved 2 Ball DZR Brass CW602N Chrome Plated 1 Bonnet DZR Brass CW602N 1 Compression Olive Brass BS EN 12449 CW505L/CW507L 2 Compression Nut DZR Brass BS EN 12165 CW617N 2 Stem DZR Brass CW602N 1 Extension Stem Outer Aluminium 1 Extension Stem Inner Steel Plated 1 D171AC D171ACEXS Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) AC WEIGHT (kg) ACEXS L (mm) AC L2 (mm) AC H (mm) AC H (mm) ACEXS 15mm 212 275 66.5 98.5 47 103 22mm 368 429 80 98.5 51 107 28mm 608 682 92.5 125 62 116 35mm 1007 1125 104.5 140 77.5 129 42mm 1549 1667 122 140 83 135 54mm 2538 2683 141 165 97.5 150 All dimensions are nominal. Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 30 65 120 16 10 5 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Compression ends to suit BS EN 1057: Half SPECIFICATION: hard R250 copper tube. Temperature Operating Range: -10 to 120°C Quarter Turn OPERATOR: Lever Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 32 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BALL VALVES D171ACTH / D171ACLS PN16 D171ACTH Compression DZR Ball Valve with T-Handle D171ACLS Compression DZR Ball Valve with Lockshield Designed to be light, compact and easy to install and operate, Crane's next generation DZR ball valve is WRAS approved and features improved leak resistance and reduced risk of damage from over tightening. Materials PART MATERIAL QUANTITY Hex-Nut Steel Plated 1 T-Handle Aluminium AL-46100 Maroon 1 Packing Nut Brass CW617N 1 Packing Gland PTFE WRAS Approved 1 Body DZR Brass CW602N 1 Seats PTFE WRAS Approved 2 Ball DZR Brass CW602N Chrome Plated 1 Bonnet DZR Brass CW602N 1 Compression Olive Brass BS EN 12449 CW505L/CW507L 2 Compression Nut DZR Brass BS EN 12165 CW617N 2 Stem DZR Brass CW602N 1 Lockshield Brass CW617N 1 Lockshield Cover Polypropelene Maroon 1 Dimensions and Weights D171ACTH D171ACLS Dimensional Drawing SIZE WEIGHT (kg) ACTH WEIGHT (kg) ACLS L (mm) L2 (mm) ACTH H (mm) ACTH H (mm) ACLS 15mm 187 220 66.5 50 40 42 22mm 343 376 80 50 43 47 28mm 567 614 92.5 55 54 59.5 35mm 977 1039 104.5 82 61 67 42mm 1487 1549 122 82 67 73.5 54mm 2634 2437 141 110 80.5 87.5 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 30 65 120 16 10 5 Intermediate pressure ratings shall be determined by interpolation All dimensions are nominal. PRESSURE RATING: PN16 UK END CONNECTION: Compression ends to suit BS EN 1057: Half SPECIFICATION: hard R250 copper tube. Temperature Operating Range: -10 to 120°C Quarter Turn OPERATOR: T-Handle / Spanner or Socket Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 33 BALL VALVES D191 PN25 D191 Threaded DZR Ball Valve for Gas Applications Designed to be light, compact and easy to install and operate, Crane's next generation DZR ball valve features improved leak resistance and reduced risk of damage from over tightening. The D191 is tested by BSI and complies with essential requirements of BS EN 331 :1998 Materials PART MATERIAL QUANTITY Hex-Nut Dacromet Plated Steel 1 Handle Sleeve PVC Yellow 1 Handle Dacromet Plated Steel 1 Packing Nut Brass CW617N 1 Packing Gland PTFE 1 Body DZR Brass CW602N 1 Ball DZR Brass CW602N 1 Seats PTFE 2 O-Ring NBR with BS EN 549 approval 1 Bonnet DZR Brass CW602N 1 Stem DZR Brass CW602N 1 D191 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) L (mm) L1 (mm) L2 (mm) H (mm) 1 All dimensions are nominal. /4 152 46 12 89 41 /8|| 136 46 12 89 41 /2|| 205 59 15.5 98.5 48 /4|| 302 67 17 98.5 51 1|| 511 80.5 21 125 63 11/4|| 890 94 23 140 78 11/2|| 1292 102 23 140 83.5 Pressure/Temperature Ratings 2238 124 26.5 165 97.5 Non Gas Application 3 1 3 || 2 TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 110 25 23.5 Gas Application TEMPERATURE (°C) PRESSURE (BAR) -20 to 60 5 Intermediate pressure ratings shall be determined by interpolation Gas approved to BS EN 331: 1998 PRESSURE RATING: PN25 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) SPECIFICATION: formerly BS 21 US END CONNECTION: ANSI B1.20.1:1983 (please add suffix AT to Tested by BSI and complies with the essential requirements of BS EN 331: 1998 denote American Thread) Temperature Operating Range: Non Gas -10 to 110°C, Gas -20 to 60°C Quarter Turn, PTFE seats and stem seal. OPERATOR: Lever Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 34 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BUTTERFLY VALVES F611, F621, F626 PN16 F621 Semi-Lugged Lever Operated Butterfly Valves to BS EN 593: 2009 Key Features: • Aluminium Bronze disc • Stainless steel shaft • Trigger lever • Valves are suitable for use with flanges conforming to BSEN1092-2 PN10 or PN16 and ANSI B16.1 Class 125 Materials PART MATERIAL Body Ductile Iron ASTM A536 (Epoxy Paint) Disc Aluminium Bronze Liner (F611) Nitrile Temp. -10 to 90°C Liner (F621) EPDM (WRAS Approved) Temp. -10 to 100°C Liner (F626) EPDM (High Temperature) Temp. -10 to 130°C Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key Carbon Steel O Ring Buna-N Bushing PTFE Lever & Screw Carbon Steel (Epoxy Paint) Stop Plate Carbon Steel (Zn Plated) F611 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) 50mm 3.5 195 65mm 4 207 83 44 32 102 260 32 95 48 32 121 260 80mm 5.4 46 213 102 48 32 130 260 100mm 64 6.7 232 124 54 32 171 260 125mm 90 9 245 136 57 32 197 260 111 150mm 9.9 257 150 57 32 219 260 145 200mm 16.4 305 197 63 44 268 356 193 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) F611 F621 F626 -10 to 90 -10 to 100 -10 to 130 16 16 16 PRESSURE RATING: PN16 / ANSI Class 125 END CONNECTION: Semi Lugged OPERATOR: Trigger lever SPECIFICATION: F611 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 97/23/EC. F621 - Suitable for Group 2 liquids only as defined by the Pressure Equipment Directive 97/23/EC and these valves are WRAS Approved. F626 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 97/23/EC. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 35 BUTTERFLY VALVES F612, F622, F627 PN16 F622 Sizes 50-300mm Semi-Lugged Gearbox Operated Butterfly Valves to BS EN 593: 2009 Key Features: • Aluminium Bronze disc • Stainless steel shaft • Gearbox operated • Valves 50-300mm are suitable for use with flanges conforming to BS EN 1092-2 PN10 or PN16 and ANSI B16.1 Class 125 • Sizes 350mm to 600mm are only PN16 flanges Materials PART MATERIAL Body Ductile Iron ASTM A536 (Epoxy Paint) Disc Aluminium Bronze Liner (F612) Nitrile Temp. -10 to 90°C Liner (F622) EPDM (WRAS Approved) Temp. -10 to 100°C Liner (F627) EPDM (High Temperature) Temp. -10 to 130°C Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key Carbon Steel O Ring Buna-N Bushing PTFE F612 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) K (mm) 50mm 65mm 80mm 100mm 125mm 150mm 200mm 250mm 300mm 350mm 400mm 450mm 500mm 600mm 15 15.5 16.9 18.2 20.5 21.4 29 33.5 45.8 56.2 88.4 110.2 160.5 260 162 175 181 200 213 225 260 292 337 368 400 422 479 562 83 95 102 124 136 150 197 210 248 279 305 381 381 457 44 48 48 54 57 57 63 70 79 79 89 108 133 156 42 42 42 42 42 42 40 40 40 40 – – – – 102 121 130 171 197 219 268 332 410 435 508 543 592 708 150 150 150 150 300 300 300 300 300 300 450 450 450 450 32 46 64 90 111 145 193 241 290 325 380 427 474 574 240 240 240 240 240 240 230 230 230 230 277 277 321 335 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) F612 F622 F627 -10 to 90 -10 to 100 -10 to 130 16 16 16 PRESSURE RATING: PN16 / ANSI Class 125 END CONNECTION: Semi-Lugged OPERATOR: Gearbox SPECIFICATION: F612 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 97/23/EC. F622 - Suitable for Group 2 liquids only as defined by the Pressure Equipment Directive 97/23/EC and these valves are WRAS Approved. F627 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 97/23/EC. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 36 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com BUTTERFLY VALVES F614, F624, F628 PN16 F624 Fully-Lugged Lever Operated Butterfly Valves to BS EN 593: 2009 Key Features: • Aluminium Bronze discs • Stainless steel shaft • Trigger lever • Valves are suitable for use with flanges conforming to BS EN 1092-2 PN10 or PN16 Materials PART MATERIAL Body Ductile Iron ASTM A536 (Epoxy Paint) Disc Aluminium Bronze Liner (F614) Nitrile Temp. -10 to 90°C Liner (F624) EPDM (WRAS Approved) Temp. -10 to 100°C Liner (F628) EPDM (High Temperature) Temp. -10 to 130°C Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key Carbon Steel O Ring Buna-N Bushing PTFE Lever & Screw Carbon Steel (Epoxy Paint) Stop Plate Carbon Steel (Zn Plated) F614 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) 50mm 4 195 83 44 32 102 260 32 65mm 4.5 207 95 48 32 121 260 46 80mm 7.2 213 102 48 32 130 260 64 100mm 12.6 232 124 54 32 171 260 90 125mm 13.5 245 136 57 32 197 260 111 150mm 14.9 257 150 57 32 219 260 145 200mm 24.1 305 197 63 44 268 356 193 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) F614 F624 F628 -10 to 90 -10 to 100 -10 to 130 16 16 16 PRESSURE RATING: PN16 END CONNECTION: Lugged OPERATOR: Trigger lever SPECIFICATION: F614 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 97/23/EC. F624 - Suitable for Group 2 liquids only as defined by the Pressure Equipment Directive 97/23/EC and these valves are WRAS Approved. F628 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 97/23/EC. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 37 BUTTERFLY VALVES F615, F625, F629 PN16 Sizes 50-300mm Fully-Lugged Gearbox Operated Butterfly Valves to BS EN 593: 2009 Key Features: • Aluminium Bronze disc • Stainless steel shaft • Gearbox operated • Valves are suitable for use with flanges conforming to BS EN 1092-2 PN10 or PN16 - Sizes 65-200mm • BS EN 1092-2 PN16 flanges only - Sizes 250-600mm PN16 only Materials F625 PART MATERIAL Body Ductile Iron ASTM A536 (Epoxy Paint) Disc Aluminium Bronze Liner (F615) Nitrile Temp. -10 to 90°C Liner (F625) EPDM (WRAS Approved) Temp. -10 to 100°C Liner (F629) EPDM (High Temperature) Temp. -10 to 130°C Shaft Stainless Steel Type 410 Taper Pin Stainless Steel Type 316 Key Carbon Steel O Ring Buna-N Bushing PTFE F629 Dimensions and Weights Dimensional Drawing SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) K (mm) 50mm 65mm 80mm 100mm 125mm 150mm 200mm 250mm 300mm 350mm 400mm 450mm 500mm 600mm 15.5 16 18.7 24.1 25 26.4 36.7 47.1 62.1 84.9 123.8 139.7 215.5 337.3 162 175 181 200 213 225 260 292 337 368 400 422 479 562 83 95 102 124 136 150 197 210 248 279 305 381 381 457 44 48 48 54 57 57 63 70 79 79 89 108 133 156 42 42 42 42 42 42 40 40 40 40 – – – – 102 121 130 171 197 219 268 332 410 435 508 543 592 708 150 150 150 150 300 300 300 300 300 300 450 450 450 450 32 46 64 90 111 145 193 241 290 325 380 427 474 574 240 240 240 240 240 240 230 230 230 230 277 277 321 335 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) F615 F625 F629 -10 to 90 -10 to 100 -10 to 130 16 16 16 PRESSURE RATING: PN16 END CONNECTION: Lugged OPERATOR: Gearbox SPECIFICATION: F615 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 97/23/EC. F625 - Suitable for Group 2 liquids only as defined by the Pressure Equipment Directive 97/23/EC and these valves are WRAS Approved. F629 - Suitable for Group 1 and 2 gases and Group 1 and 2 liquids as defined by the Pressure Equipment Directive 97/23/EC. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 38 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com CHECK VALVES D138 PN25 Bronze Swing Check Valve with Metal Disc Check valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. The Crane D138 Bronze check valve is of the swing variety. This valve carries the British Standards Institution kitemark - your assurance of exacting quality. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Cap Bronze BS EN 1982 CC491K All Disc Brass BS EN 12164 CW614N 3/8 Disc Bronze BS EN 1982 CC491K 11/4 Hinge Bronze BS EN 1982 CC491K Hinge Pin Stainless Steel -1 Dimensional Drawing -3 All 21/2 -2 &3 Stainless Steel ASTM A182 Gr.F316 Hinge Nut Brass BS EN 12164 CW614N All ID. Plate Aluminium All Drive Pin Steel - Electro Brassed B 3/8 Hinge Pin Hinge Pin Plug D138 All Brass BS EN 12164 CW614N 21/2 &3 Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) /8|| 0.19 48 33 /2|| 0.32 58 38 /4|| 0.43 66 42 1|| 0.61 80 49 11/4|| 1.01 89 56 11/2|| 1.34 95 65 2|| 2.12 108 76 21/2|| 4.08 155 98 3|| 5.76 190 99 3 1 3 A Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 110 120 186 25.0 23.4 21.8 10.5 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN25 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Swing Type Check Valve SPECIFICATION: Metal Disc, Screwed in Cap, BSI Kitemark Approved. Valves are manufactured in accordance with BS5154:1991 PN25 for Series B ratings. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 186°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 39 CHECK VALVES D140 Bronze PN25 Bronze Swing Check Valve with Resilient Disc Check valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. The Crane D140 Bronze check valve is of the swing variety. This valve carries the British Standards Institution kitemark - your assurance of exacting quality standards. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Cap Bronze BS EN 1982 CC491K All Disc Holder Brass BS EN 12164 CW614N Disc Holder Bronze BS EN 1982 CC491K Disc Nitrile Rubber -1 11/4 - 3 Disc Retaining Nut Bronze BS EN 1982 CC491K Brass BS EN 12164 CW614N Hinge Bronze BS EN 1982 CC491K Hinge Pin Stainless Steel 1/2 - 21/2 3 only 1/2 - 21/2 All 1/2 -2 Brass BS EN 12164 CW614N 21/2 &3 Hinge Pin Plug Brass BS EN 12164 CW614N 21/2 &3 Hinge Nut Brass BS EN 12164 CW614N All I.D. Plate Aluminium All Drive Pin Steel-electro brassed All Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) /2|| 0.33 58 38 /4|| 0.43 66 42 1|| 0.63 80 49 11/4|| 1.01 89 56 11/2|| 1.34 95 65 2|| 2.12 108 76 21/2|| 4.2 153 98 3|| 6.02 188 98 1 3 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) PRESSURE RATING: PN25 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Swing Type Check Valve B Brass BS EN 12164 CW614N Hinge Pin Dimensional Drawing All Disc Retaining Nut Washer 1/2 D140 -10 to 100 25 A TH EADED TO BSEN1 BS 1 (ISO 7) TA E . O ANSI B1. .1 TA E SPECIFICATION: Valves are manufactured in accordance with BS 5154: 1991 PN25 for Series B ratings but are limited to 100 degrees celsius maximum temperature. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 100°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 40 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com CHECK VALVES FM492 PN16 Cast Iron Check Valve Check valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. Swing pattern, metal faced disc. Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 All Cap Cast Iron BS EN 1561 GJL-250 All Disc Cast Iron BS EN 1561 GJL-250 All Body Seat Ring Bronze BS EN 1982 CC491K All Disc Ring Bronze BS EN 1982 CC491K All Hinge Pin Bush Bronze BS EN 1982 CC491K All FM492 Dimensional Drawing Stainless Steel Type 304 50mm - 100mm Hinge Pin 13% Cr.Steel AISI Type 410 125mm - 300mm Cap Bolts Steel BS3692 Gr.8.8 All Cap Bolt Nuts Steel BS3692 Gr.8 All Gasket Asbestos Free All Body Plate Aluminium All Dimensions and Weights SIZE WEIGHT (kg) A (mm) E (mm) 50mm 11.3 203 113 65mm 15.6 216 126 136 80mm 19.3 241 100mm 26.6 292 153 125mm 44 330 186 150mm 55.5 356 207 200mm 119 495 250 250mm 175 622 352 300mm 263 698 397 All X X Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) E Bronze BS EN 1982 CC491K Hinge Pin NOM SIZE Hinge Pin Plug -10 to 100 220 16 12.1 A FLANGED BS45 4 N1 / BSEN1 9 - Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Flanged BS EN 1092-2 OPERATOR: Swing Type Check Valve SECTION X-X SPECIFICATION: Valves are manufactured in accordance with BS EN 12334: 2001. End flanges conform to BS EN 1092-2 with raised face and are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 220°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 41 CHECK VALVES F493 Class 125 Cast Iron Check Valve The F493 is a swing check valve with a Bronze trim. Each valve is manufactured to BS 5153:1974 Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 All Cap Cast Iron BS EN 1561 GJL-250 All Disc Cast Iron BS EN 1561 GJL-250 All Body Seat Ring Bronze BS EN 1982 CC491K All Disc Ring Bronze BS EN 1982 CC491K All Hinge Pin Bush Bronze BS EN 1982 CC491K All Hinge Pin Plug Bronze BS EN 1982 CC491K All Hinge Pin Stainless Steel Type 304 2-4 Hinge Pin 13% Cr.Steel AISI Type 410 5 - 12 Cap Bolts Steel BS3692 Gr.8.8 All Cap Bolts Nuts Steel BS3692 Gr.8 All Gasket Asbestos Free All Body Plate Aluminium All F493 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) 2|| 11.3 203 113 21/2|| 15.6 216 126 3|| 19.3 241 136 4|| 26.6 292 153 5|| 44 330 186 6|| 55.5 356 207 8|| 119 495 250 10|| 175 622 352 12|| 263 698 397 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 65 150 230 13.8 11.4 8.6 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: Class 125 US END CONNECTION: ANSI Class 125 OPERATOR: Swing Check Valve SPECIFICATION: Valves are manufactured in accordance with BS 5153: 1974 and also meet the requirements of MSS.SP-71. End flanges conform to BS 1560. Section 3.2/ANSI B16.1 Class 125 with flat face and are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 230°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 42 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com CHECK VALVES FM469 PN16 Cast Iron Check Valve Check valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. Swing pattern, bronze trim, resilient seated. Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 All Cap Cast Iron BS EN 1561 GJL-250 All Disc Cast Iron BS EN 1561 GJL-250 All Body Seat Ring Bronze BS EN 1982 CC491K All Disc Ring Nitrile Rubber All Hinge Pin Bush Bronze BS EN 1982 CC491K All Hinge Pin Plug Bronze BS EN 1982 CC491K All Hinge Pin Stainless Steel Type 304 Hinge Pin 13% Cr.Steel AISI Type 410 Cap Bolts Steel BS3692 Gr.8.8 All Cap Bolt Nuts Steel BS3692 Gr.8 All Gasket Asbestos Free All Body Plate Aluminium All Disc Ring Ret’g Nut Cast Iron BS EN 1561 GJL-250 All Retaining Nut Pin Steel All FM469 Dimensional Drawing X X NOM SIZE 100 - 300 A Dimensions and Weights SIZE WEIGHT (kg) A (mm) E (mm) 50mm 11.3 203 113 65mm 15.6 216 126 80mm 19.3 241 136 100mm 26.6 292 153 125mm 44 330 186 150mm 55.5 356 207 200mm 119 495 250 250mm 175 622 352 300mm 263 698 397 E 50 - 80 FLANGED BS4504 PN10 / BSEN1092-2 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 65 16 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Flanged BS EN 1092-2 PN16 OPERATOR: Swing check valve SPECIFICATION: Valves are manufactured in accordance with BS EN 12334: 2001. End flanges conform to BS EN 1092-2 Section 3.2 Table 11 with raised face and are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 65°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 43 CHECK VALVES FM450/FM451 Wafer PN16 Cast Iron Wafer Check Valve Check valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in action, depending upon pressure and velocity of flow within the line to perform their functions of opening and closing. Swing Pattern, Metal Faced Disc (FM450) Resilient Seated (FM451) Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 Disc SG Cast Iron BS2789 100 - 300 Disc Ring Bronze BS EN 1982 CC491K 100 - 300 Disc Bronze BS EN 1982 CC491K 50 - 80 All Stainless Steel Type 304 All Hinge Pin Stainless Steel Type 304 All Spacer PTFE (Glass Filled) All Spring Stainless Steel Type 304 or 316 All Plug Bronze BS EN 1982 CC491K All Hinge Nut Stainless Steel Type 304 All Eye Bolt Steel (Zinc Plated) Body Seat Ring Bronze BS EN 1982 CC491K FM450 Body Seat Ring Ethylene Propylene Diene Monomer FM451 Dimensional Drawing C Hinge FM450-F451 150 - 300 Dimensions and Weights SIZE WEIGHT (kg) A (mm) 50mm 1.3 65mm 1.8 80mm B B (mm) C (mm) 43 99 57 46 111 67 2.6 49 130 73 100mm 4.7 56 162 88 125mm 7 64 194 102 150mm 9.8 70 216 168 200mm 15 71 273 194 250mm 300mm 20 30 76 83 330 380 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) 227 255 PRESSURE RATING: PN16 UK END CONNECTION: Wafer style one piece flangeless cast iron body. Suitable for use between flanges drilled in accordance with BS EN 1092-2 PN10 and PN16, BS10 Table D or E and ANSI 125 US END CONNECTION: BS 1560, ANSI B16-1, ANSI B16-5 OPERATOR: Swing type check. A -10 to 65 150 230 13.8 11.4 8.6 Intermediate pressure ratings shall be determined by interpolation SPECIFICATION: Face to Face dimensions conform to ISO 5752. Suitable for installation in vertical and horizontal pipelines. When installed in vertical pipelines the flow must be in an upward direction. This valve is suitable for use on group 2 liquids only, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 230°C (FM450) -10 to 120°C (FM451). Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 44 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com CHECK VALVES FM455 Wafer PN25 Ductile Iron Wafer Check valve Check valves permit flow in one direction only, and close automatically if flow reverses. They are entirely automatic in operation, depending upon pressure and velocity of flow within the pipeline to perform their opening and closing functions. The FM455 is a Double Door wafer pattern valve, spring loaded to assist closing, and with an EPDM seat for quiet operation. Materials PART MATERIAL Body Ductile Iron - BS EN 1561 EN-JL1030 Discs Stainless Steel SS316 Shaft Stainless Steel 10088-1 X10CrNil8-10 Stop Pin Stainless Steel 10088-1 X10CrNil8-10 Seat EPDM Springs Stainless Steel 10088-1 X10CrNil8-10 FM455 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) 50 2.5 105 65 3.5 124 54 8 60 54 14 80 4.5 73 137 57 16 100 89 8.0 168 64 25 114 125 10.0 194 70 34 141 150 13.0 222 76 43 168 200 28.0 276 95 61 219 250 45.0 340 108 80 273 300 68.0 400 143 102 324 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 120 25 SPECIFICATION: Face to Face dimensions conform to BS EN 558-1. Suitable for fitting between flanges conforming to BS EN 1092-2 PN25 Suitable for mounting in horizontal and vertical pipelines. When installed in vertical pipelines the flow must be in an upward direction. This valve is suitable for use on group 2 liquids only as defined by the pressure equipment directive and 97/23/EC. Temperature operating range: -10 to 120°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 45 GATE VALVES D151 PN20 Bronze Gate Valve Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. The D151 carries the British Standards Institution kitemark - your assurance of exacting quality standards. In addition the D151 is WRAS approved. Materials PART MATERIAL Body Bronze BS EN 1982 CC491K Bonnet Bronze BS EN 1982 CC491K Stem DZR Brass BS EN 12164 CW602N Stem Manganese Bronze Disc Bronze BS EN 1982 CC491K Stem Retainer DZR Brass BS EN 12164 CW602N 1/2 DZR Brass BS EN 12164 CW602N 1/4, 3/8, Stuffing Box SIZES All All 1/4 -3 4 All -2 21/2 & 3 Stuffing Box Bronze BS EN 1982 CC491K 4 Packing Asbestos Free All Packing Gland Brass BS EN 12164 CW614N 1/4, 3/8, 1/2 & 3/4 Packing Gland Nut Brass BS EN 12164 CW614N Packing Gland Bronze BS EN 1982 CC491K Packing Nut Brass BS EN 12164 CW614N Packing Nut Bronze BS EN 1982 CC491K Hand Wheel Aluminium Hand Wheel Malleable Iron BS EN 1562 GJMB-300-6 4 ID. Plate Aluminium All Hand Wheel Nut Brass BS EN 12164 CW614N Gasket Asbestos Free Dimensional Drawing 4 1/4 -3 4 1/4 -3 All 3-4 Dimensions and Weights Pressure/Temperature Ratings SIZE WEIGHT (kg) A (mm) B (mm) C (mm) /4|| 3 || /8 1 || /2 3 || /4 1|| 11/4|| 11/2|| 2|| 21/2|| 3|| 4|| 0.27 0.26 0.269 0.384 0.593 0.844 1.266 1.881 4.37 6.4 19.7 46 46 50 54 62 71 77.5 87.5 96 105 162 75 75 73 84 104 113 130 153 219 259 366 45 45 52.5 60 65 70 78 92 103 121 203 1 D151 1-3 TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 180 20 9 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN20 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Solid wedge disc, non-rising stem, screwed in bonnet. Valves are manufactured in accordance with BS EN 12288: 2010 PN20 series B and are BSI Kitemark approved. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 180°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 46 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GATE VALVES D151A PN20 DZR Gate Valve Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Materials PART MATERIAL SIZES Body DZR Brass BS EN 12165 CW602N All Bonnet DZR Brass BS EN 12165 CW602N All Stem DZR Brass BS EN 12164 CW602N All Packing Nut Brass BS EN 12164 CW614N All Packing PTFE All Stem Bush DZR Brass BS EN 12164 CW602N All Disc DZR Brass BS EN 12165 CW602N All Hand Wheel Aluminium All Hand Wheel Nut Steel (Zinc Plated) All D151A Dimensions and Weights WEIGHT (kg) A (mm) B (mm) C (mm) /4|| 0.2 43 69 45 || 8 / 0.19 43 69 45 /2|| 0.23 50 69 45 /4|| 0.36 54 79 52 1|| 0.5 62 92 52 11/4|| 0.82 70 108 65 11/2|| 1.08 72 125 70 2|| 1.83 82 150 92 2 1/2|| 2.9 97 176 103 3|| 3.97 111 204 120 1 3 1 3 Dimensional Drawing C DIA. B SIZE Pressure/Temperature Ratings TEMPERATURE (°C) -10 to 100 180 20 9 PRESSURE (BAR) Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN20 END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. A SPECIFICATION: Valves are manufactured in accordance with BS EN 12288: 2010 PN20 for Series B ratings. Non Rising Stem This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 180°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 47 GATE VALVES D155C PN16 Features & Benefits • Robust and high quality bronze body with integral seating surfaces • Offers the ultimate in dependable service wherever minimum pressure drop is important • WRAS Approved for use with potable water • Inside screw pattern with non-rising stem Materials PART MATERIAL SPECIFICATION Body Bronze BS EN 1982 (CC491K) Bonnet Bronze BS EN 1982 (CC491K) Stem DZR Brass BS EN 12164 CW602N Disc Bronze BS EN 1982 (CC491K) Stem Retainer DZR Brass BS EN 12164 CW602N Packing Ring Asbestos Free Gland (28-54 only) Brass BS EN 12164 CW614N Packing Nut Brass BS EN 12164 CW614N Handwheel Aluminium - Identification Plate Aluminium - Handwheel Nut Brass BS EN 12164 CW614N D155C Dimensional Drawing Compression Olive Brass BS EN 12449:1999 CW505L OR CW507L Compression Nut BS EN 12165 CW617N Brass Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) 15 0.34 69 74 53 26.5 22 0.50 75 86 59 23.5 28 0.70 86 105 65 25.5 35 .95 100 110 70 30.5 42 1.45 111 131 78 34.5 54 2.50 133 152 93 37 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) 16.0 14.3 12.6 10.0 8.7 7.8 6.9 6.0 5.0 -10 to 30 40 50 65 80 90 100 110 120 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Compression ends to BS EN 1057: 2006: Half hard R250 OPERATING INSTRUCTIONS: Handwheel. Gate valves are best for services that require infrequent valve operation and where the disk is kept either fully open or closed. They are not practical for throttling. SPECIFICATION: Valves are manufactured in accordance with BS EN 12288: 2010 (formerly BS 5154) PN20 for Series B ratings, but are limited to the pressure/temperature ratings detailed in BS EN 1057: 2006 for compression end fittings. This valve is to be used on Group 2 liquids only, as defined by the Pressure Equipment Directive 97/23/EC. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 48 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GATE VALVES D151X PN25 Bronze Gate Valve Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. This valve carries the British Standards Institution kitemark - your assurance of exacting quality. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Bonnet Bronze BS EN 1982 CC491K All Stem DZR Brass BS EN 12164 CW602N All Disc Bronze BS EN 1982 CC491K All Stuffing Box DZR Brass BS EN 12164 CW602N 1/4 21/2 -2 & 3 only Stem Bushing DZR Brass BS EN 12164 CW602N Packing Asbestos Free Gland Brass BS EN 12164 CW614N All Packing Nut Brass BS EN 12164 CW614N All Hand Wheel Aluminium All ID. Plate Aluminium All Hand Wheel Nut Brass BS EN 12164 CW614N All Gasket Asbestos Free All D151X Dimensional Drawing C DIA. 3 only SIZE WEIGHT (kg) A (mm) B (mm) C (mm) /4|| 0.27 46 75 45 /8|| 0.26 46 75 45 /2|| 0.35 51 82 52 /4|| 0.55 55 95 65 1|| 0.84 63 118 70 11/4|| 1.18 71 144 79 11/2|| 1.66 73 166 92 2|| 2.55 83 190 103 21/2|| 4.56 105 220 103 3|| 6.38 111 259 121 1 3 1 3 B Dimensions and Weights Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 110 120 186 25.0 23.4 21.8 10.5 A Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN25 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Valves are manufactured in accordance with BS EN 12288: 2010 PN25 for series B ratings. All Sizes BSI Kitemarked. Non Rising Stem This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 186°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 49 GATE VALVES D156 PN16 Brass Gate Valve Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Materials PART MATERIAL SIZES Body Brass BS EN 12165 CW617N All Bonnet Brass BS EN 12165 CW617N All Stem Brass BS EN 12164 CW617N All Packing Nut Brass BS EN 12165 CW617N All Packing Asbestos Free All Stem Bush Brass BS EN 12164 CW617N All Disc Brass BS EN 12165 CW617N All Hand Wheel Aluminium All Hand Wheel Nut Steel (Zinc Plated) All D156 Dimensions and Weights WEIGHT (kg) A (mm) B (mm) C (mm) /4|| 1 0.2 41 69 44 || 8 / 0.2 41 69 44 /2|| 0.22 48 69 44 /4|| 0.35 54 79 52 1|| 0.52 62 92 52 11/4|| 0.77 68 108 65 11/2|| 1.02 72 125 70 2|| 1.75 82 150 92 21/2|| 2.77 97 176 103 3|| 3.9 111 204 120 4|| 6.35 131 262 152 3 1 3 Dimensional Drawing C DIA. B SIZE Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 170 16 7 Intermediate pressure ratings shall be determined by interpolation A PRESSURE RATING: PN16 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Hand Wheel. Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Valves 1/4|| to 2|| are manufactured in accordance with BS EN 12288: 2010 PN16 for Series B ratings. Non rising stem This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 170°C. AVAILABLE OPTIONS: P150 locking device. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 50 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GATE VALVES D159 PN32 Bronze Gate Valve Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. This valve carries the British Standards Institution kitemark - your assurance of exacting quality. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K Bonnet Bronze BS EN 1982 CC491K 1/4 -3 Stem DZR Brass BS EN 12164 CW602N 1/4 -2 Stem Bronze BS EN 1982 CC491K Disc Bronze BS EN 1982 CC491K Stuffing Box DZR Brass BS EN 12164 CW602N All 21/2 & 3 All 1/4 21/2 -2 &3 Stuffing Box Bronze BS EN 1982 CC491K Packing Asbestos Free All Gland Brass BS EN 12164 CW614N All Packing Nut Brass BS EN 12164 CW614N All Hand Wheel Aluminium All ID. Plate Aluminium All Hand Wheel Nut Brass BS EN 12164 CW614N All Gasket Asbestos Free D159 Dimensional Drawing C 3 only SIZE WEIGHT (kg) A (mm) B (mm) C (mm) /4|| /8|| 1 || /2 3 || /4 1|| 11/4|| 11/2|| 2|| 21/2|| 3|| 0.36 0.35 0.47 0.6 0.92 1.41 1.92 2.72 5.62 7.89 46 46 51 55 63 71 73 83 105 111 75 75 82 95 118 144 166 190 232 264 45 45 52 65 70 79 92 103 103 121 1 3 B Dimensions and Weights A Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 198 32 14 THREADED BSEN10226 FORMERLY BS21 TAPER OR ANSI B1.20.1 TAPER Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN32 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Valves are manufactured in accordance with BS EN 12288: 2010 PN32 for series B ratings. Non Rising Stem. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 198°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 51 GATE VALVES D166 PN32 Bronze Gate Valve Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K Bonnet Bronze BS EN 1982 CC491K Stem Bronze BS EN 1982 CC491K Stem Aluminium Bronze BS EN 12163 CW301G Stem Manganese Bronze All All 1/4 -2 21/2 3 Disc Bronze BS EN 1982 CC491K All Packing Asbestos Free All Gland Brass BS EN 12164 CW614N Packing Nut Brass BS EN 12164 CW614N 1/4 21/2 All -2 &3 Packing Nut Bronze BS EN 1982 CC491K Hand Wheel Aluminium All ID. Plate Aluminium All Hand Wheel Nut Brass BS EN 12164 CW614N All D166 Dimensional Drawing C SIZE WEIGHT (kg) A (mm) B (mm) C (mm) /4|| 0.32 46 126 45 /8|| 0.31 46 126 45 /2|| 0.46 51 129 52 /4|| 0.72 55 159 65 1|| 1.1 63 189 70 11/4|| 1.5 71 219 78 11/2|| 2.25 73 246 92 2|| 3.2 83 301 92 21/2|| 5.8 108 369 134 3|| 8.52 117 416 134 1 3 1 3 B OPEN Dimensions and Weights Pressure/Temperature Ratings TEMPERATURE (°C) -10 to 100 198 20 9 PRESSURE (BAR) Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN32 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. A SPECIFICATION: Valves are manufactured in accordance with BS EN 12288: 2010 PN32 for series B ratings. Rising stem This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 198°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 52 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GATE VALVES D180 PN32 Bronze Gate Valve Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Bonnet Bronze BS EN 1982 CC491K Stem Bronze BS EN 1982 CC491K 1/4 21/2 Stem Brass BS EN 12164 CW721R Disc Bronze BS EN 1982 CC491K Union Ring Bronze BS EN 1982 CC491K Packing Asbestos Free Gland Brass BS EN 12164 CW614N All -2 &3 All 1/4 - 2 only All Packing Nut Brass BS EN 12164 CW614N Packing Nut Bronze BS EN 1982 CC491K Hand Wheel Aluminium Hand Wheel Malleable Iron BS EN 1562 GJMB-300-6 ID. Plate Aluminium All 1/4 -2 21/2 & 3 1/4 -2 D180 21/2 & 3 All Hand Wheel Nut Brass BS EN 12164 CW614N Stud Steel BS970 070M20 21/2 & 3 only Stud Nut Steel BS4190 Gr.4 21/2 & 3 only Gasket Asbestos Free 21/2 & 3 only Dimensional Drawing All Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) /4|| /8|| 1 || /2 3 || /4 1|| 11/4|| 11/2|| 2|| 21/2|| 3|| 0.32 0.31 0.46 0.72 1.1 1.5 2.3 3.2 5.8 8.5 46 46 51 55 63 71 73 83 108 117 126 126 129 159 189 219 246 301 369 416 45 45 52 65 70 78 92 92 134 134 1 3 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 120 260 32 14 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN32 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Valves are manufactured in accordance with BS EN 12288: 2010 PN32 for series A ratings. Rising Stem Sizes 1/4|| to 2|| have a union bonnet; sizes 2.1/2|| and 3|| have a bolted bonnet. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 260°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 53 GATE VALVES D237 PN20 Bronze Gate Valve with Lockshield Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. The D237 carries the British Standards Institution Kitemark - your assurance of exacting quality standards. In addition the D237 is WRAS approved. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K 1/2 -3 Bonnet Bronze BS EN 1982 CC491K 1/2 -3 Disc Bronze BS EN 1982 CC491K 1/2 -3 Stem DZR Brass BS EN 12164 CW602N 1/2 -3 Stuffing Box DZR Brass BS EN 12164 CW602N Stem Retainer DZR Brass BS EN 12164 CW602N Gland Brass BS EN 12164 CW614N Packing Asbestos Free 1/2 -3 Lockshield Brass BS EN 12164 CW614N 1/2 -3 Box Spanner Mild Steel 1/2 -3 21/2 & 3 1/2 -2 1-3 D237 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) /2|| 0.276 50 78 90 100 /4|| 0.389 54 87 90 100 1|| 0.593 62 106 125 100 11/4|| 0.831 71 116 125 100 11/2|| 1.248 77.5 132 125 100 2|| 1.882 87.5 156 125 100 21/2|| 4.15 96 218 - - 3|| 6.24 105 253 - - 1 3 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 180 20 9 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN20 END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 OPERATOR: Lockshield Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Solid wedge disc, non-rising stem, screwed in bonnet. Valves are manufactured in accordance with BS EN 12288: 2010 PN20 series B and are BSI Kitemark approved. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 180°C. AVAILABLE OPTIONS: P103 lockshield key 1/2|| - 2|| P100 lockshield key 21/2|| - 3|| Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 54 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GATE VALVES D237A PN20 Lockshield Operated DZR Gate Valve Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Materials PART MATERIAL SIZES Body DZR Brass BS EN 12165 CW602N All Bonnet DZR Brass BS EN 12165 CW602N All Stem DZR Brass BS EN 12164 CW602N All Lockshield Brass BS EN 12164 CW614N All Packing Asbestos Free All Stem Bush DZR Brass BS EN 12164 CW602N All Disc DZR Brass BS EN 12165 CW602N All Dimensions and Weights WEIGHT (kg) A (mm) B (mm) /2|| 0.23 50 65 /4|| 0.36 54 75 1 3 1|| 0.5 62 81 1 1/4|| 0.82 70 105 1 1/2|| 1.08 72 122 2|| 1.83 82 149 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 180 20 9 D237A Dimensional Drawing B SIZE Intermediate pressure ratings shall be determined by interpolation THREADED TO BSEN10226 formerly BS 21 (ISO 7) TAPER A PRESSURE RATING: PN20 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 OPERATOR: Lockshield Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Valves are manufactured in accordance with BS EN 12288: 2010 for Series B ratings. Non Rising Stem This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 180°C. AVAILABLE OPTIONS: P103 Lockshield key Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 55 GATE VALVES D255C PN16 Features & Benefits • Robust and high quality bronze body with integral seating surfaces • Offers the ultimate in dependable service wherever minimum pressure drop is important • WRAS Approved for use with potable water • Inside screw pattern with non-rising stem Materials PART MATERIAL SPECIFICATION Body Bronze BS EN 1982 (CC491K) Bonnet Bronze BS EN 1982 (CC491K) Stem DZR Brass BS EN 12164 CW602N Disc Bronze BS EN 1982 (CC491K) Stem Retainer DZR Brass BS EN 12164 CW602N Packing Ring Asbestos Free Gland (28-54 only) Brass BS EN 12164 CW614N Locksheild BS EN 12164 CW614N Brass D255C Compression Olive Brass BS EN 12449:1999 CW505L OR CW507L Compression Nut BS EN 12165 CW617N Brass Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) D (mm) 15 0.34 69 78 26.5 22 0.50 75 90 23.5 28 0.70 86 110 25.5 35 0.95 100 115 30.5 42 1.45 111 136 34.5 54 2.50 133 160 37 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) 16.0 14.3 12.6 10.0 8.7 7.8 6.9 6.0 5.0 -10 to 30 40 50 65 80 90 100 110 120 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Compression ends to BS EN 1057: 2006: Half hard R250 OPERATING INSTRUCTIONS: Lockshield. Gate valves are best for services that require infrequent valve operation, and where the disk is kept either fully opened or fully closed. They are not practical for throttling SPECIFICATION: Valves are manufactured in accordance with BS EN 12288: 2010 (formerly BS 5154) PN20 for Series B ratings, but are limited to the pressure/temperature ratings detailed in BS EN 1057: 2006 for compression end fittings. This valve is to be used on Group 2 liquids only, as defined by the Pressure Equipment Directive 97/23/EC. AVAILABLE OPTIONS: P100 and P102 Lockshield Keys Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 56 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GATE VALVES DM160 PN16 Series B Bronze Gate Valve Crane gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Bonnet Bronze BS EN 1982 CC491K All Disc Bronze BS EN 1982 CC491K All 21/2 &3 Stem Bronze BS EN 1982 CC491K Stem DZR Brass BS EN 12164 CW602N Packing Asbestos Free All Gland Brass BS EN 12164 CW614N All Packing Nut Brass BS EN 12164 CW614N 3/4 -2 All 11/4 & 11/2 Stuffing Box DZR Brass BS EN 12164 CW602N Stuffing Box Brass BS EN 12164 CW614N 2 only Stuffing Box Bronze BS EN 1982 CC491K 21/2 & 3 Stem Bush Aluminium Bronze BS EN 12163 CW301G 3/4 & 1 Hand Wheel Malleable Iron BS EN 1562 GJMB-300-6 3 only 3/4 Hand Wheel Aluminium Hand Wheel Nut Brass BS EN 12164 CW614N ID. Plate Aluminium Gasket Asbestos Free - DM160 Dimensional Drawing 21/2 C DIA All All 3 only Dimensions and Weights A (mm) B (mm) C (mm) D (mm) E (mm) 20mm 1.57 89 105 65 105 6 25mm 2.5 99 116 70 115 8 32mm 3.38 110 141 92 140 8 40mm 4.93 120 168 92 150 9 50mm 5.54 135 189 103 165 11 65mm 8.39 165 232 103 185 13 80mm 12.25 185 264 121 200 13 E B WEIGHT (kg) D DIA SIZE FLANGED TO BS 4504 PN16 Pressure/Temperature Ratings TEMPERATURE (°C) -10 to 100 170 16 7 PRESSURE (BAR) A Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 END CONNECTION: Flanged BS EN 1092-3 (formerly BS4504) OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. AVAILABLE OPTIONS: Flanges undrilled, P150 Locking device. SPECIFICATION: Valves are manufactured in accordance with BS5154: 1991 PN16 for Series B ratings, having ‘short’ face to face dimensions. Non Rising Stem End flanges conform to BS EN 1092-3 with flat face and are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 170°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 57 GATE VALVES FM52 PN6 Cast Iron Gate Valve Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Complete with Bronze trim. Each valve is hydrostatically tested to BS EN 12266-1: 2003 Manufactured in accordance with BS EN 1171: 2002 Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 Bonnet Cast Iron BS EN 1561 GJL-250 All Bonnet Gasket Asbestos Free All Disc Cast Iron BS EN 1561 GJL-250 All Stem Brass BS EN 12163 CW721R All Stuffing Box Cast Iron BS EN 1561 GJL-250 All Gland Cast Iron BS EN 1561 GJL-250 All All Stuffing Box Gasket Asbestos Free All Packing Asbestos Free All Hand Wheel Cast Iron All Body Seat Ring Bronze BS EN 1982 CC491K All Disc Stem Nut Bronze BS EN 1982 CC491K All Disc Ring Bronze BS EN 1982 CC491K All FM52 Dimensional Drawing E DIA VIEW FROM ARROW A FOR SIZES 50 TO 150MM Dimensions and Weights WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) 50mm 14 150 16 140 277 140 90 65mm 16 170 16 160 296 140 110 A F (mm) 20 180 18 190 337 152 128 27 190 18 210 369 203 148 125mm 39 200 20 240 429 229 178 150mm 44 210 20 265 470 229 202 200mm 82 292 22 320 600 305 258 250mm 123 330 24 375 722 356 312 300mm 174 356 24 440 818 406 365 C DIA 80mm 100mm F DIA D SIZE B A Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 120 150 6 5.4 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN6 UK END CONNECTION: Flanged BS EN 1092-2 PN6 OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Wedge Disc, Non-Rising Stem, Inside Screw and Yoke This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: - 10 to 150°C. AVAILABLE OPTIONS: Flanges undrilled. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 58 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GATE VALVES F53 Class 125 Cast Iron Gate Valve Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 All Bonnet Cast Iron BS EN 1561 GJL-250 All Bonnet Gasket Asbestos Free All Disc Cast Iron BS EN 1561 GJL-250 All Stem Brass BS EN 12164 CW721R All Stuffing Box Cast Iron BS EN 1561 GJL-250 All Gland Cast Iron BS EN 1561 GJL-250 All Stuffing Box Gasket Asbestos Free All Packing Asbestos Free All Hand Wheel Cast Iron All Body Seat Ring Bronze BS EN 1982 CC491K All Disc Stem Nut Bronze BS EN 1982 CC491K All Disc Ring Bronze BS EN 1982 CC491K All F53 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) D (mm) H (mm) 2|| 12.7 178 277 140 21/2|| 15.8 190 296 140 3|| 19.5 203 337 152 4|| 29.3 229 369 203 5|| 39.5 254 429 229 6|| 45.8 267 470 229 8|| 84 292 600 305 10|| 148 330 722 356 12|| 198 356 818 406 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 65 230 13.8 8.6 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: Class 125 US END CONNECTION: ANSI Class 125 OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Valves are manufactured in accordance with BS5150:1990. End flanges conform to BS1560 Section 3.2/ANSI B16.1 Class 125 with flat face and are normally supplied drilled. Wedge disc, non-rising stem, inside screw, bronze trim. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 230°C. AVAILABLE OPTIONS: Flanges undrilled Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 59 GATE VALVES FM57 PN10 Cast Iron Gate Valve Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Complete with Bronze trim. Each valve is hydrostatically tested to BS EN 12266-1: 2003. Manufactured in accordance with BS EN 1171: 2002. Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 Bonnet Cast Iron BS EN 1561 GJL-250 All Bonnet Gasket Asbestos Free All All Disc Cast Iron BS EN 1561 GJL-250 All Stem Brass BS2874 CZ114 All Stuffing Box Cast Iron BS EN 1561 GJL-250 All Gland Cast Iron BS EN 1561 GJL-250 All Stuffing Box Gasket Asbestos Free All Packing Asbestos Free All Hand Wheel Cast Iron All Body Seat Ring Bronze BS EN 1982 CC491K All Disc Stem Nut Bronze BS EN 1982 CC491K All FM57 Dimensional Drawing E DIA VIEW FROM ARROW A FOR SIZES 50 TO 150MM Disc Ring Bronze BS EN 1982 CC491K All Dimensions and Weights B (mm) C (mm) D (mm) E (mm) F (mm) 50mm 14 178 20 165 277 140 102 65mm 17 190 20 185 296 140 122 80mm 22 203 22 200 337 152 138 100mm 30 229 24 220 369 203 158 125mm 41 254 26 250 429 229 188 150mm 47 267 26 285 470 229 212 200mm 85 292 26 340 600 305 268 250mm 146 330 28 395 722 356 320 300mm 188 356 28 445 818 406 370 C DIA A (mm) F DIA WEIGHT (kg) D A SIZE B A Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 180 10 8.4 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN10 UK END CONNECTION: Flanged BS EN 1092-2: PN10 OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. SPECIFICATION: Long face to face, Wedge Disc, Non-rising stem. Valves are manufactured in accordance with BS EN 1171: 2002. End flanges conform to BSEN1092-2 PN10 with raised face and are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: - 10 to 180°C. AVAILABLE OPTIONS: Flanges undrilled, P50 locking device. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 60 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GATE VALVES FM63 PN16 Cast Iron Gate Valve Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Each valve is manufactured in accordance with BS EN 1171: 2002 and hydrostatically tested to BS EN 12266-1: 2003. Materials ITEM DESCRIPTION NO MATERIAL MATERIAL SPEC BS EN 1561 GJL-250 1 Body Grey Iron 2 Bonnet Grey Iron BS EN 1561 GJL-250 3 Disc Grey Iron BS EN 1561 GJL-250 4 Body Seat Ring Bronze BS EN 1982 (CC491K) 5 Disc Seat Ring Bronze BS EN 1982 (CC491K) 6 Stem Stainless Steel BS970: 410S21 7 Gasket Graphite Graphite (Asbestos Free) 8 Gland Packing Nut Stainless Steel BS970: 304S31 BS EN 1561 EN-GJL-250 9 Handwheel Grey Iron 10 Stem Retaining Ring Stainless Steel BS970: 304S31 11 Disc Stem Nut Bronze BS EN 1982 (CC491K) 12 Packing Ring Graphite Graphite (Asbestos Free) 13 Body/Bonnet Bolt Steel BS 3692 GR 8.8 14 Body/Bonnet Nut Steel BS 3692 GR 8 15 Handwheel Retaining Nut Steel BS 4190 GR 4 16 Handwheel Washer Steel BS4320 17 Body I.D. Plate (Not Shown) Aluminium FM63 Dimensional Drawing - Dimensions and Weights SIZE (mm) WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) 65 80 100 125 150 200 250 300 18.7 23.9 37.6 50.7 63.8 104.3 194.5 275.5 190 203 229 254 267 292 330 356 20 22 24 26 26 30 32 32 185 200 220 250 285 340 405 460 262 286 356 426 463 578 773 860 190 190 220 300 300 350 406 457 118 132 156 184 211 266 319 370 All dimensions are nominal. Please note size 50mm is also available, please refer to the website. Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 120 200 16 12.8 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Flanged BS EN 1092-2: PN16 PRESSURE/ TEMPERATURE OPERATING RANGE: -10 to 120°C at 16 bar, 200°C at 12.8 bar SPECIFICATION: Wedge Disk, Non-Rising Stem, Inside Screw, Hand Wheel Operated. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. AVAILABLE OPTIONS: Flanges undrilled, P139 Stem Adapter. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 61 GATE VALVES FM82 PN16 Cast Iron Gate Valve Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Each valve is hydrostatically tested to BS EN 12266-1: 2003. Manufactured in accordance with BS EN 1171: 2002. Materials NO PART MATERIAL 1 2 2 3 4 5 6 7 8 9 10 11 11 13 14 16 18 20 Body Bonnet/Yoke Bonnet Disc Stem Body Seat Ring Disc Seat Ring Yoke Sleeve Yoke Sleeve Retg Nut Yoke Sleeve Nut Gland Flange Gland (2||-4||) Gland (5||-12||) Packing Bonnet Gasket Hand Wheel Body Plate Yoke Cast Iron BS EN 1561 GJL-250 Cast Iron BS EN 1561 GJL-250 Cast Iron BS EN 1561 GJL-250 Cast Iron BS EN 1561 GJL-250 Stainless Steel 410 S21 Bronze BS EN 1982 (CC491K) Bronze BS EN 1982 (CC491K) Bronze BS EN 1982 (CC491K) Ductile Iron ASTM A536 65-45-12 Malleable Iron BS EN 1562 GJMB 300-6 Malleable Iron BS EN 1562 GJMB 300-6 Brass BS EN 12164 CW721R Malleable Iron BS EN 1562 GJMB-300-6 Graphite Graphite wrapped with SS304 Malleable Iron BS EN 1562 GJMB-300-6 Aluminium Cast Iron BS EN 1561 GJL-250 FM82 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) H (mm) 50mm 65mm 80mm 100mm 125mm 150mm 200mm 250mm 300mm 22.5 26.4 31 44.3 72.3 88.1 140 225 314 178 190 203 229 254 267 292 330 356 20 20 22 24 26 26 30 32 32 165 185 200 220 254 279 340 405 460 334 354 375 449 575 649 800 984 1127 399 432 469 566 714 813 1013 1257 1454 19 19 19 22 28.5 28.5 34.9 39.7 39.7 203 203 203 229 305 305 356 406 457 102 122 135 155 185 212 248 320 378 Pressure/Temperature Ratings TEMPERATURE (°C) -10 to 120 200 16 12.8 PRESSURE (BAR) Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Flanged BS EN 1092-2 PN16 OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. AVAILABLE OPTIONS: SPECIFICATION: Valves are manufactured in accordance with BS EN 1171: 2002. End flanges conform to BSEN1092-2 with raised face and are normally supplied drilled. Bronze trim, rising stem. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: - 10 to 200°C. Flanges undrilled. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 62 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GATE VALVES F84 Class 125 Cast Iron Gate Valve Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Each valve is manufactured in accordance with BS 5150: 1990. Materials PART MATERIAL SIZES Body Bonnet Disc Disc Stem Stem Body Seat Ring Disc Ring Yoke Yoke Hub Bolts/Nuts Yoke Pad Bolts/Nuts Yokesleeve Yokesleeve Yokesleeve Ret’g Nut Yokesleeve Nut Yokesleeve Nut Gland Gland Gland Flange Packing Gasket Hand Wheel Body Plate Cast Iron BS EN 1561 GJL-250 Cast Iron BS EN 1561 GJL-250 Bronze BS EN 1982 CC491K Cast Iron BS EN 1561 GJL-250 Brass BS EN 12163 CW721R Brass JIS - H3250 Gr.6872 Bronze BS EN 1982 CC491K Bronze BS EN 1982 CC481K Cast Iron BS EN 1561 GJL-250 Steel BS4190 Gr.4.6/4 Steel BS4190 Gr.4.6/4 Manganese Bronze ASTM B584-C86400 Bronze BS EN 1982 CC491K Malleable Iron BS EN 1562 GJMB-300-6 Malleable Iron BS EN 1562 GJMB-300-6 Ductile Iron ASTM A536 65-45-12 Malleable Iron BS EN 1562 GJMB-300-6 Cast Iron BS EN 1561 GJL-250 Ductile Iron ASTM A536 65-45-12 Asbestos Free Asbestos Free Malleable Iron BS EN 1562 GJMB-300-6 Aluminium All All 2-4 5 - 12 2-4 5 - 12 All 5 - 12 5 - 12 5 - 12 5 - 12 2-4 5 - 12 2-4 2-4 5 - 12 2-4 5 - 12 5 - 12 All All All All F84 Dimensional Drawing H Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) H (mm) 2|| 21/2|| 3|| 4|| 5|| 6|| 8|| 10|| 12|| 21.5 24.8 29.5 42.7 72.3 88.1 140 225 314 178 190 203 229 254 267 292 330 356 399 432 469 566 714 813 1013 1257 1454 203 203 203 229 305 305 356 406 457 B Open Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 65 230 13.8 8.6 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: Class 125 US END CONNECTION: ANSI Flanged OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. AVAILABLE OPTIONS: Flanges Undrilled. A SPECIFICATION: Valves meet the requirements of MSS.SP-70: 1998. End flanges conform to BS1560 Section 3.2/ANSI B16.1. Class 125 with flat face and are normally supplied drilled. Wedge Disc, Rising Stem, Outside Screw and Yoke. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature Operating Range: -10 to 230°C Valves tested in accordance with BS EN 12266-1: 2003 Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 63 GATE VALVES F58 Class 125 Cast Iron Gate Valve Crane cast iron gate valves offer the ultimate in dependable service wherever minimum pressure drop is important. Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 All Bonnet Cast Iron BS EN 1561 GJL-250 All Disc Cast Iron BS EN 1561 GJL-250 All Stem 13% Cr.Steel BS970 Pt.1 410S21 or 431S29 All Body Seat Ring Bronze BS EN 1982 CC491K All Disc Ring Bronze BS EN 1982 CC491K All Yokesleeve Bronze BS EN 1982 CC491K All Yokesleeve Nut Ductile Iron ASTM A536 65-45-12 2, 3, 5, 8 & 10 Yokesleeve Nut Cast Iron BS EN 1561 GJL-250 21/2, 4, 6 & 12 Yokesleeve Ret’g Nut Ductile Iron ASTM A536 65-45-12 Yokesleeve Ret’g Nut Cast Iron BS EN 1561 GJL-250 2, 3, & 5 21/2, 4, 6 & 12 Disc Stem Nut Bronze BS EN 1982 CC491K All Gland Cast Iron BS EN 1561 GJL-250 All Packing Asbestos Free All Gasket Asbestos Free All Yoke Cast Iron BS EN 1561 GJL-250 Hand Wheel Malleable Iron BS EN 1562 GJMB-300-6 F58 Dimensional Drawing 8, 10 & 12 All Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) H (mm) 2|| 21/2|| 3|| 4|| 5|| 6|| 8|| 10|| 12|| 17 20 28 38 56 60 112 185 242 178 190 203 229 254 267 292 330 356 365 448 481 622 672 835 989 1208 1469 152 152 203 229 254 254 305 356 406 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 65 230 13.8 8.6 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: Class 125 US END CONNECTION: ANSI Class 125 OPERATOR: Hand Wheel Gate valves are best for services that require infrequent valve operation, and where the disc is kept either fully opened or fully closed. They are not practical for throttling. AVAILABLE OPTIONS: Flanges Undrilled. P50 Locking Device SPECIFICATION: Valves are manufactured in accordance with BS 5150: 1990. End flanges conform to BS 1560 section 3.2/ANSI B16.1 Class 125 with flat face and are normally supplied drilled. Wedge disc, Rising Stem, Outside Screw and Yoke This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 230°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 64 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GLOBE VALVES D4 PN20 Series B Bronze Globe Valve Crane Bronze globe valves are highly efficient for throttling because seat and disc designs provide flow characteristics with proportionate relationships between valve lift and flow rate. This valve carries the British Standards Institution kitemark - your assurance of exacting quality. Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Bonnet Bronze BS EN 1982 CC491K All Disc Brass BS EN 12164 CW614N Disc Bronze BS EN 1982 CC491K Stem Brass BS EN 12164 CW614N All Packing Asbestos Free All Gland Brass BS EN 12164 CW614N All Packing Nut Brass BS EN 12164 CW614N Disc Stem Ring Mang.Bronze BS EN 12164 CW721R Hand Wheel Aluminium 1/4 - 11/2 2 D4 Dimensional Drawing All 2 only All Hand Wheel Nut Brass BS EN 12164 CW614N All ID. Plate Aluminium All Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) /4|| 0.23 44 75 52 /8|| 0.22 44 75 52 /2|| 0.31 55 82 52 /4|| 0.42 63 89 52 1|| 0.71 77 102 65 11/4|| 1.12 91 118 70 11/2|| 1.5 98 134 78 2|| 2.48 118 171 103 1 3 1 3 Pressure/Temperature Ratings TEMPERATURE (°C) -10 to 100 180 20 9 PRESSURE (BAR) Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN20 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21. US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) OPERATOR: Hand Wheel SPECIFICATION: Valves are manufactured in accordance with BS5154: 1991 PN20 for Series B ratings. Body seat is integral and is a narrow contact angled type. Sizes 1/4|| to 2|| taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21. versions BSI Kitemarked. Metal disc, screwed bonnet This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 180°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 65 GLOBE VALVES D14 PN32* Series A PN32* Bronze Globe Valve Crane Bronze globe valves are highly efficient for throttling because seat and disc designs provide flow characteristics with proportionate relationships between valve lift and flow rate. * Sizes 2 1/2 & 3 rated PN25 Materials PART MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Bonnet Bronze BS EN 1982 CC491K All Disc Stem Ring Brass BS EN 12163 CW721R All Disc Bronze BS EN 1982 CC491K All Stem Manganese Bronze BS EN 12163 CW721R All Gland Brass BS EN 12164 CW614N All Packing Asbestos Free Packing Nut Brass BS EN 12164 CW614N Packing Nut Bronze BS EN 1982 CC491K 3 only Hand Wheel Malleable Iron BS EN 1562 GJMB-300-6 Hand Wheel Nut Brass BS EN 12164 CW614N Aluminium Asbestos Free - 21/2 1/4 Aluminium Gasket Dimensional Drawing All 1/4 Hand Wheel ID. Plate D14 - 21/2 3 only All All 21/2 - 3 Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) /4|| 0.39 52 100 52 /8|| 0.38 52 100 52 /2|| 0.54 62 101 52 /4|| 0.65 74 115 52 1 3 1 3 1|| 0.9 90 125 70 11/4|| 1.58 100 150 70 11/2|| 2.06 115 159 92 2|| 3.31 136 191 103 21/2|| 5.9 166 220 121 || 3 10.3 190 255 152 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) formerly BS 21. US END CONNECTION: ANSI B1.20.1 (please add suffix AT to OPERATOR: Hand Wheel 260 32 14 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN32 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) denote American Thread) -10 to 100 SPECIFICATION: Valves are manufactured in accordance with BS5154:1991 series A, PN32 for sizes 1/4 to 2 and PN25 for sizes 21/2 and 3. Design incorporates a bronze 35 degree wide angle disc retained on stem by a threaded ring; body seat is integral of the narrow contact angled type. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 260°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 66 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GLOBE VALVES D15 PN32* Series B Bronze Globe Valve The Crane D15 Bronze Globe Valve is highly efficient for throttling service. * Sizes 21/2|| and 3|| are rated at PN25. This valve carries the British Standards Institution kitemark - your assurance of exacting quality. Bill of Materials PART MATERIAL SIZES Body Bonnet Disc Stem Ring Disc Disc Holder Disc Holder Disc Retaining Nut Disc Retaining Nut Washer Stem Stem Gland Packing Packing Nut Packing Nut Hand Wheel Hand Wheel Hand Wheel Nut ID. Plate Gasket Gasket Bronze BS EN 1982 CC491K Bronze BS EN 1982 CC491K Brass BS EN 12163 CW721R PTFE (25% Glass Filled) Bronze BS EN 1982 CC491K Brass BS EN 12165 CW617N Brass BS EN 12164 CW614N Bronze BS EN 1982 CC491K Brass BS EN 12164 CW614N Brass BS EN 12163 CW721R Manganese Bronze Brass BS EN 12164 CW614N Asbestos Free Brass BS EN 12164 CW614N Bronze BS EN 1982 CC491K Aluminium Malleable Iron BS EN 1562 GJMB-300-6 Brass BS EN 12164 CW614N Aluminium Asbestos Free Stainless Steel All All All All 11/4 - 3 1/4 - 1 1/4 - 2 21/2 & 3 1/4 - 2 only 1/4 - 2 21/2 & 3 All All 1/4 - 2 21/2 - 3 1/4 - 21/2 3 only All All 21/2 only 3 only D15 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) /4|| /8|| 1 || /2 3 || /4 1|| 11/4|| 11/2|| 2|| 21/2|| 3|| 0.4 0.39 0.54 0.65 0.81 1.55 2.01 3.08 6.1 10.5 52 52 62 74 90 100 115 136 166 190 100 100 101 115 125 150 159 191 220 255 52 52 52 52 70 70 92 103 121 152 1 3 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) formerly BS 21. US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) 198 32 14 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN32 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) OPERATOR: Hand Wheel -10 to 100 SPECIFICATION: Valves are manufactured in accordance with BS5154: 1991 series B, PN32 for sizes 1/4|| to 2|| and PN25 for sizes 21/2|| and 3|| Sizes 1/4|| to 3|| Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 BSI Kitemarked. Design incorporates a disc holder retained on stem by a threaded ring; body seat is integral of the semi-crown type. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 198°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 67 GLOBE VALVES D16 PN32* Series A Bronze Globe Valve Crane Bronze globe valves are highly efficient for throttling because seat and disc designs provide flow characteristics with proportionate relationships between valve lift and flow rate. * Please note Sizes 21/2|| and 3|| are rated at PN25 Materials PART MATERIAL Body Bronze BS EN 1982 CC491K All Bonnet Bronze BS EN 1982 CC491K All Body Seat Ring 13% Cr.Steel BS970 Pt.1 410S21 or 431S29 All Disc Stem Ring Brass BS EN 12163 CW721R All Disc 13% Cr.Steel BS970 Pt.1 410S21 or 431S29 Disc Nickel Alloy Stem Manganese Bronze BS EN 12163 CW721R Gland Brass BS EN 12164 CW614N Packing SIZES 1/2 1/4, 3/8, D16 -2 21/2 & 3 All Dimensional Drawing All Asbestos Free All 1/4 - 21/2 Packing Nut Brass BS EN 12164 CW614N Packing Nut Bronze BS EN 1982 CC491K Hand Wheel Aluminium Hand Wheel Malleable Iron BS EN 1562 GJMB-300-6 Hand Wheel Nut Brass BS EN 12164 CW614N All ID. Plate Aluminium All Gasket Asbestos Free 3 only 1/4 - 21/2 3 only 21/2 - 3 Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) /4|| 0.33 52 100 52 /8|| 0.31 52 100 52 /2|| 0.8 62 101 52 /4|| 1.24 74 115 52 1|| 1.5 90 125 70 11/4|| 1.7 100 150 70 11/2|| 2.16 115 159 92 2|| 3.67 136 191 103 21/2|| 6 166 220 121 1 3 1 3 || 3 10.9 190 255 178 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to OPERATOR: Hand Wheel 260 32 14 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN32 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) denote American Thread) -10 to 100 SPECIFICATION: Valves are manufactured in accordance with BS 5154: 1991 Series A, PN32 for sizes 1/4|| to 2|| and PN25 for sizes 2.1/2|| and 3||. Design incorporates a nickel alloy plug type disc retained on the stem by a threaded ring; body seat is a screwed-in stainless steel ring. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 260°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 68 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com GLOBE VALVES FM369 PN16 Cast Iron Globe Valve Crane cast iron globe valves are highly efficient for throttling because seat and disc designs provide flow characteristics with proportionate relationships between valve lift and flow rate. Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 Bonnet Cast Iron BS EN 1561 GJL-250 Disc Guide Pin Brass BS EN 12164 CW721R 125 - 150 Gland Brass BS EN 12164 CW614N All Gland Flange Malleable Iron BS EN 1562 GJMB-300-6 All Gasket Asbestos Free All Disc Stem Ring Brass BS EN 12164 CW721R All Lockwasher Brass BS EN 1652 All Disc Bronze BS EN 1982 CC491K All Body Seat Ring Bronze BS EN 1982 CC491K All Stem Brass BS EN 12164 CW721R All Packing Asbestos Free All Yoke Bushing Brass BS EN 12164 CW721R All Hand Wheel Malleable Iron BS EN 1562 GJMB-300-6 All All All FM369 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) 50mm 24.2 203 65mm 29 216 G (mm) 20 165 203 310 335 102 20 185 203 330 356 122 80mm 36.9 241 22 200 229 362 392 138 100mm 56 292 24 220 254 416 446 158 125mm 72.3 330 26 250 305 457 489 188 150mm 98.8 356 26 285 305 476 516 212 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 220 16 12.1 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Flanged BS EN 1092-2 PN16 OPERATOR: Hand Wheel AVAILABLE OPTIONS: Flanges Undrilled SPECIFICATION: Valves are manufactured in accordance with BS EN 13789:2010. End flanges conform to BS EN 1092-2 PN16 with raised face. Valves are normally supplied drilled. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: - 10 to 220°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 69 GLOBE VALVES F372 Class 125 Cast Iron Globe Valve Crane cast iron globe valves are highly efficient for throttling because seat and disc designs provide flow characteristics with proportionate relationships between valve lift and flow rate. Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 All Bonnet Cast Iron BS EN 1561 GJL-250 All Disc Guide Pin Brass BS EN 12164 CW721R 5&6 Gland Brass BS EN 12164 CW614N All Gland Flange Malleable Iron BS EN 1562 GJMB-300-6 All Gasket Asbestos Free All Disc Stem Ring Brass BS EN 12164 CW721R All Lockwasher Brass BS EN 1652 All Disc Bronze BS EN 1982 CC491K All Body Seat Ring Bronze BS EN 1982 CC491K All Stem Brass BS EN 12164 CW721R All Packing Asbestos Free All Yoke Bushing Brass BS EN 12164 CW721R All Hand Wheel Malleable Iron BS EN 1562 GJMB-300-6 All F372 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) 2|| 23.1 203 16 152 203 310 335 21/2|| 27.2 216 17 178 203 330 356 3|| 34.5 241 19 191 229 362 392 4|| 54.4 292 24 229 254 416 446 5|| 70.8 330 24 254 305 457 489 6|| 95.3 356 25 279 305 476 516 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 65 150 230 13.8 11.4 8.6 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: Class 125 US END CONNECTION: ANSI Class 125 OPERATOR: Hand Wheel AVAILABLE OPTIONS: Flanges undrilled. SPECIFICATION: Valves are manufactured in accordance with BS5152: 1974 and also meet the requirements of MSS.SP-85: 2002. End flanges conform to BS1560 Section 3.2/ANSI B16.1 Class 125 with Flat Face and are normally supplied drilled. Valves detailed on this page are dimensioned in metric terms. This valve is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 230°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 70 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com STRAINERS D297 PN32 Bronze Strainer Scale and dirt in piping systems cause endless trouble and frequently serious damage to pipeline equipment. Installation of Crane strainers will help eliminate the problems caused by foreign matter within piping systems. The Crane D297 features: Perforated stainless steel screen, Robust design, Low flow resistance, High Quality Materials, WRAS approved. Materials MATERIAL SIZES Body Bronze BS EN 1982 CC491K All Cap Bronze BS EN 1982 CC491K All Gasket Asbestos Free (WRAS) All ID. Plate Aluminium All Pin Steel - Electro Brassed All Screen Stainless Steel Type 304 All A (mm) B (mm) C (mm) D (mm) E (mm) /2|| 0.38 71 79 30 51 61 /4|| 0.63 86 96 38 64 77 1|| 0.96 101 110 47 72 92 11/4|| 1.81 134 144 56 100 128 11/2|| 2.43 148 157 65 109 139 2|| 4.13 176 183 79 126 160 1 3 THREADED BSEN10226 formerly BS 21 (ISO 7) TAPER OR ANSI B1.20.1 TAPER E APPROX. WEIGHT (kg) B A WITHDRAWAL DISTANCE SIZE Dimensional Drawing D Dimensions and Weights D297 C A/F HEX PART OPTIONAL BSP TAPPING Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 200 32 14 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN32 UK END CONNECTION: Taper threaded to BS EN 10226-2 (ISO 7-1) formerly BS 21 US END CONNECTION: ANSI B1.20.1 (please add suffix AT to denote American Thread) SPECIFICATION: Strainers fitted with stainless steel perforated strainer element with 0.75mm diameter holes. Screens fitted into Crane Strainers conform to the high standards of materials and workmanship associated with all Crane products. This strainer is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 200°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44FLUID (0)1473 277400 CRANE SYSTEMS www.cranefs.com 71 STRAINERS D298 PN16 Features • • • • Robust design Threaded ends Low flow resistance High quality materials Application A generous use of pipeline strainers will make a significant contribution to the reliability of a piping system and to optimise performance of the equipment - pumps, valves, flow measuring devices, traps etc. Strainers are a low cost investment for any piping system and result in reduced maintenance costs as well as minimising ‘downtime’ by protecting the circuit from damage by foreign matter. D298 Dimensional Drawing Materials NO PART MATERIAL 1 Body Bronze to BS EN 1982 CC491K 2 Mesh Stainless Steel to A.I.S.I. Type 304 3 Cap Seal P.T.F.E. 4 Cap Bronze to BS EN 1982 CC491K 5 ID Plate Aluminium D = withdrawal distance for the screen Dimensions and Weights DN MESH HOLE Ø (mm) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) MASS (kg) 15 0.75 58 33 40 55 62 27 0.1875 20 0.75 70 42 54 69 80 33 0.3045 25 0.75 88 48 60 80 93 39 0.4260 32 0.75 96 55 69 95 108 49 0.7437 40 0.75 107 61 76 107 118 55 1.0075 50 0.75 126 79 99 135 153 67 1.4600 Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 100 170 16 7 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 SPECIFICATION: 16 bar -10° to 100°C Bronze body 7 bar at 170°C Screen 304 stainless steel TEST PRESSURE: 24 bar hydraulic End connections threaded to BS EN 10266 (BS21 Taper ISO R7) & B1.20.1 ANSI Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 72 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com STRAINERS FM276 PN16 Cast Iron Strainer Scale and dirt in piping systems cause endless trouble and frequently serious damage to pipeline equipment. Installation of Crane strainers will help eliminate the problems caused by foreign matter within piping systems. The FM276 offers the integrity of manufacture, quality and reliability which are the hallmarks of all Crane products. Materials PART MATERIAL SIZES Body Cast Iron BS EN 1561 GJL-250 Cap Cast Iron BS EN 1561 EN-GJL-250 50 - 200 Cap Ductile Iron BS EN 1563 EN GJS 500/7 250-300 Gasket Asbestos Free All Screen Stainless Steel AISI Type 304 All Drain Plug Malleable Iron All Test Point Plug Rc 1/4 Malleable Iron All All FM276 Dimensional Drawing E B PRESSURE TAPPINGS 1/4 Rc (BSP TAPER) A (mm) B (mm) C (mm) D (mm) E (mm) F (mm) G (mm) 50mm 13 165 20 102 3 226 142 193 65mm 23 185 20 122 3 290 216 272 80mm 30 200 122 138 3 306 226 272 100mm 43 220 24 158 3 350 264 330 125mm 71 250 26 188 3 399 320 406 150mm 93 285 26 212 3 480 356 457 200mm 161 340 30 268 3 600 442 577 250mm 266 405 32 320 3 686 495 696 300mm 397 460 32 378 4 757 579 828 350mm 359 520 36 438 4 946 688 988 400mm 480 580 38 490 4 1076 743 1108 450mm 630 640 40 550 4 1172 990 1410 WITHDRAWAL DISTANCE WEIGHT (kg) F SIZE G NO MINAL ØA Dimensions and Weights H UG PL R N PE AI A DR P T BS Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 120 200 16 12.8 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: PN16 UK END CONNECTION: Flanged BS EN 1092-2: PN16 SPECIFICATION: End flanges conform to BS EN 1092-2 PN16 Section 3.2 table 11 with raised face and are normally supplied drilled. Strainers are normally. supplied with a stainless steel perforated strainer element having 1.5mm diameter holes. This product is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: - 10 to 200°C. Bosses drilled, tapped and plugged. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 73 STRAINERS F277 Class 125 Cast Iron Strainer Scale and dirt in piping systems cause endless trouble and frequently serious damage to pipeline equipment. Installation of Crane strainers will help eliminate the problems caused by foreign matter within piping systems. Stainless Steel strainer element. Materials PART MATERIAL Body Cast Iron BS EN 1561 GJL-250 Cap Cast Iron BS EN 1561 EN-GJL-250 50 - 200 Cap Ductile Iron BS EN 1563 EN GJS 500/7 250-300 Gasket Asbestos Free All Screen Stainless Steel AISI Type 304 All Malleable Iron All Malleable Iron All Drain Plug SIZES All FM277 Dimensional Drawing C 1/4 Test Point Plug Rc WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) E (mm) H (Rc) SCREEN AREA cm2 2|| 13 152 15.9 230 156 213 1|| 213 2/ 23 178 17.5 290 210 298 11/4|| 343 3|| 30 191 19.1 310 215 301 11/4|| 388 4|| 43 229 23.8 350 245 350 11/4|| 575 5|| 71 254 23.8 400 297 430 11/2|| 884 6|| 93 279 25.4 480 333 484 11/2|| 1174 1 || 2 8|| 161 342 28.6 600 416 611 2|| 1999 || 266 406 30.2 686 534 788 2|| 3213 12|| 397 483 31.8 759 624 928 2|| 4559 10 E SIZE D Dimensions and Weights Pressure/Temperature Ratings TEMPERATURE (°C) PRESSURE (BAR) -10 to 65 150 230 13.8 11.4 8.6 Intermediate pressure ratings shall be determined by interpolation PRESSURE RATING: Class 125 US END CONNECTION: ANSI Class 125 SPECIFICATION: End flanges conform to BS1560 - Section 3.2/ANSI B16.1 with flat face and are normally supplied drilled. This strainer is supplied with a stainless steel perforated element having 1.5mm diameter holes. This product is not suitable for use on group 1 gasses or unstable fluids, as defined by the Pressure Equipment Directive 97/23/EC. Temperature operating range: -10 to 230°C. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 74 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com STRAINERS FM278 PN25 PN25 Ductile Iron Strainer Scale and dirt in piping systems causes endless trouble and frequent serious damage to pipeline equipment. Installation of Crane strainers will help eliminate the problems caused by foreign matter with piping systems. The FM278 offers the integrity of manufacture, quality and reliability which are the hallmarks of Crane products. Materials PART MATERIAL Body Ductile Iron - BS EN 1563 EN GJS 500/7 Cap Ductile Iron - BS EN 1563 EN GJS 500/7 Gasket Asbestos Free Plug Ductile Iron - BS EN 1563 EN GJS 500/7 Screen 304 Stainless Steel FM278 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) 50 12.0 230 146 193 65 25.0 273 174 272 80 33.0 295 198 272 100 43.0 352 232 330 125 73.0 416 285 406 150 97.0 470 305 457 200 164.0 543 401 577 250 270.0 660 473 696 300 400.0 770 554 828 Pressure/Temperature Ratings TEMPERATURE °C -10 to 120 PRESSURE (BAR) 25 PRESSURE RATING: PN25 END CONNECTION: Flanged to BS EN 1092-2 PN25 SPECIFICATION: Flanges conform to BS EN 1092-2 PN25 Section 3.2 table 11 with raised face. Strainers are supplied with a stainless steel perforated strainer element having 1.6mm diameter holes. This product is suitable for use on Group 2 liquids only, as defined by the Pressure equipment Directive 97/23/EC. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 75 THERMAL BALACING VALVES Fig. 1900 Multi-Therm PN16 Features & Benefits • Ideal for domestic hot water systems to assist with protection against Legionella • Provides self-balancing, thermostatically controlled regulation of flow and disinfection • Suitable for circuits greater than 10 metres in length • Thermostatically controlled regulation of the volume flow -self-balancing • Assists with disinfection at temperatures above 70°C by increasing the flow automatically • Has an accuracy of +/- 1°C Materials PART MATERIAL SPECIFICATION Body Bronze BS EN 1982 CC491K Upper part Bronze BS EN 1982 CC491K Valve stem Bronze BS EN 1982 CC491K Valve cone Bronze BS EN 1982 CC491K Upper part seal, valve stem seal EPDM 70 EPDM Closing upper part valve cone seal PTFE Teflon Drain plug Bronze BS EN 1982 CC491K Closing handle Plastic Polyacetal (PA) Plate / clamping band Plastic Polyacetal (PA) Fig. 1900 H1 Dimensional Drawing 1/ 4 A1 G Dimensions and Weights NOM INSIDE DIA mm 15 20 Height (H1) mm 85 85 95 Length (L1) mm 110 123 133 Length (L2) Copper Tails mm 176 186 200 Length (L2) Mappress Copper mm 172 174 182 Length (L2) Mepla mm 174 178 186 Weight kg 0.7 0.9 1.2 Flow Kv cmb/h 0.92 1.70 2.71 BSP 1/4 1/4 1/4 Drain Valve (G) 25 L1 L2 Pressure/Temperature Ratings TEMPERATURE °C 90 PRESSURE (BAR) 16 PRESSURE RATING: PN16 OPERATING INSTRUCTIONS: When the set point is preset to 57°C, the valve remains completely open up to a valve temperature of 52°C. Between 52°C and the preset set point of 57°C, the valve starts to close. When the set point temperature has been reached, a minimum volume flow is continuously flowing through the circulation system. If the storage temperature is further increased to temperatures greater than 70°C to effect disinfection, the valve increases the flow.Nom Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 76 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com THERMAL BALACING VALVES Fig. 1910 Eta-Therm Features & Benefits • Ideal for domestic hot water systems to assist with protection against Legionella • Provides self-balancing, thermostatically controlled regulation of flow and disinfection • Suitable for circuits less than 10 metres in length •Thermostatically controlled regulation of the volume flow –self-balancing • Assists with disinfection at temperatures above 70°C by increasing the flow automatically • Has an accuracy of +/- 1°C Materials PART MATERIAL SPECIFICATION Body Bronze BS EN 1982 CC491K Upper part Bronze BS EN 1982 CC491K Valve stem Bronze BS EN 1982 CC491K Fig. 1910 Valve cone Bronze BS EN 1982 CC491K Upper part seal, valve stem seal EPDM 70 EPDM Closing upper part valve cone seal PTFE Teflon Drain plug Bronze BS EN 1982 CC491K Closing handle Plastic Polyacetal (PA) Plate / clamping band Plastic Polyacetal Dimensional Drawing Dimensions and Weights NOM INSIDE DIA mm Height mm 47 Length mm 86.5 15 Length Copper Tails mm 152 Length Mappress mm 148 Length Mepla mm 150 Weight kg 0.4 Flow Kv - 0.92 Pressure/Temperature Ratings TEMPERATURE °C 90 PRESSURE (BAR) 16 PRESSURE RATING: PN16 OPERATING INSTRUCTIONS: When the set point is preset to 57°C, the valve remains completely open up to a valve temperature of 52°C. Between 52°C and the preset set point of 57°C, the valve starts to close. When the set point temperature has been reached, a minimum volume flow is continuously flowing through the circulation system. If the storage temperature is further increased to temperatures greater than 70°C to effect disinfection, the valve increases the flow. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 77 THERMOSTATIC MIXING VALVES D1088 TMV 3 Features & Benefits • Blends hot and cold water to ensure constant, controlled safe outlet temperature • Fulfils the 'duty of care' requirements against scalding • Ideal for healthcare, schools, workplace & domestic environments • Flat face union ensures easy removal for maintenance • Integral strainers and check valves • Tamper proof adjustment Materials PART MATERIAL QUANTITY O-Ring EPDM Rubber 7 1.5 Strainer Stainless Steel 304 2 Reduction Union DZR Brass CW602N 2 Element Vernet 0304 1 Spring Stainless Steel 304 1 Top DZR Brass CW602N 1 Valve Body DZR Brass CW602N 1 D1088 TMV 3 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) D (mm) 15mm 0.6 122 58 55 102 22mm 0.8 145 58 70 117 FACTORY SETTING 38°C TEMPERATURE SETTING RANGE 35-46°C MINIMUM HOT TO MIX TEMPERATURE 10°C TEMPERATURE STABILITY ±2°C MAXIMUM WORKING PRESSURE 10 Bar KV 1.26 MINIMUM FLOW PRESSURE 0.2 Bar PRESSURE RATING: PN10 OPERATOR: Lockshield SPECIFICATION: The D1088 has been independently tested and certified as meeting the requirements of the D08 specification under the TMV 3 scheme. Crane products are designed for installation and use within suitably designed systems reflecting CIBSE, BSRIA and HVAC guidelines. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 78 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com THERMOSTATIC MIXING VALVES D1089 TMV 3 Features & Benefits • Blends hot and cold water to ensure constant, controlled safe outlet temperature • Fulfils the 'duty of care' requirements against scalding • Ideal for healthcare, schools, workplace & domestic environments • Flat face union ensures easy removal for maintenance • Integral strainers and check valves • Tamper proof adjustment • Includes ball valves for isolation Materials PART MATERIAL QUANTITY O-Ring EPDM Rubber 12 1.5 Strainer Stainless Steel 304 2 Reduction Union DZR Brass CW602N 2 Element Vernet 0304 1 Spring Stainless Steel 304 1 Top DZR Brass CW602N 1 Valve Body DZR Brass CW602N 1 Ball DZR Brass CW602N 1 T Handle Al Alloy 1 Ball Seal PTFE 2 D1089 TMV 3 Dimensional Drawing Dimensions and Weights SIZE WEIGHT (kg) A (mm) B (mm) C (mm) 15mm 1.1 200 128 110 22mm 1.3 200 128 110 FACTORY SETTING 38°C TEMPERATURE SETTING RANGE 35-46°C MINIMUM HOT TO MIX TEMPERATURE 10°C TEMPERATURE STABILITY ±2°C MAXIMUM WORKING PRESSURE 10 Bar KV 1.26 MINIMUM FLOW PRESSURE 0.2 Bar PRESSURE RATING: PN10 OPERATOR: Lockshield SPECIFICATION: The D1089 has been independently tested and certified as meeting the requirements of the D08 specification under the TMV 3 scheme. Crane products are designed for installation and use within suitably designed systems reflecting CIBSE, BSRIA and HVAC guidelines. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 79 PRESSURE REDUCING VALVES Fig. 430 PN16 Features & Benefits • PRVs enable control of pressure from boosted cold water supplies to match site requirements • Simple to install • Recommend that isolation valves are fitted upstream and downstream of the valve to enable isolation for cleaning of filter • WRAS approved • Manufactured in accordance with BS EN 1567 • Fig.430 must be fitted with adjustable cartridge element pointing downwards Materials PART MATERIAL Fig 430 Body Bronze Disc Bronze Cartridge Stainless Steel Bronze Filter Stainless Steel Gaskets Nitrile Dimensional Drawing Dimensions and Weights NOM SIZE mm FIG 15 440 20 440 25 440 32 440 40 440 50 440 GAUGE 445 L1 mm 90 90 100 105 130 140 All H1 mm 150 150 150 225 225 225 All H2 mm 25 25 25 38 38 38 All A1 mm G3/4 G1 G11/4 G11/2 G13/4 G23/8 All kg 0.90 0.93 1.00 2.20 2.30 2.50 0.25 Weight Pressure/Temperature Ratings TEMPERATURE °C 60 PRESSURE (BAR) 16 PRESSURE RATING: PN16 SPECIFICATION: Suitable for: • Water • Compressed Air Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 80 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com PRESSURE REDUCING VALVES Fig. 440 PN25 Features & Benefits • PRVs enable control of pressure from boosted cold water supplies to match site requirements • Simple to install • Recommend that isolation valves are fitted upstream and downstream of the valve to enable isolation for cleaning of filter • WRAS approved • Manufactured in accordance with BS EN 1567 • 440 can be installed horizontally or vertically Materials PART MATERIAL Body Bronze Cover Bronze Insert Stainless Steel Bronze Filter Stainless Steel Spring Stainless Steel Disc Brass Fig 440 Dimensional Drawing Dimensions and Weights NOM SIZE mm FIG 15 440 20 440 25 440 32 440 40 440 50 440 GAUGE 445 L1 mm 75 92 98 98 128 148 All H1 mm 110 110 150 160 190 265 All H2 mm 30 42 46 46 52 75 All S1 mm 10 10 12 12 12 13 All S2 mm 13 13 17 17 17 19 All A1 mm G3/4 G1 G11/4 G11/2 G13/4 G23/8 All kg 0.80 1.30 1.70 1.90 3.60 6.70 0.25 Weight Pressure/Temperature Ratings TEMPERATURE °C 90 PRESSURE (BAR) 25 PRESSURE RATING: PN25 SPECIFICATION: Suitable for: • Water • Compressed Air Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 81 TYPICAL Kv VALUES Typical Kv Values Typical Kv values for various valves to enable Pressure Drop calculations to be made. For other pipe specifications, valve sizes and valve types, please refer to Crane Fluid Systems. GATE VALVES (Schedule 40 Pipe) SIZE (mm) 15 20 25 32 40 50 65 80 Kv 21.32 38.88 65.69 116.23 161.93 280.6 411.33 635.13 100 125 150 200 250 300 1125.41 1823.03 2718.96 4873.47 7681.73 11315.64 GLOBE VALVES (Schedule 40 Pipe) SIZE (mm) 15 20 25 32 40 50 65 80 100 125 150 200 Kv 3.27 5.96 10.08 17.83 24.84 43.04 63.1 97.42 172.63 279.64 417.07 747.56 250 300 1178.32 1735 .74 BUTTERFLY VALVES SIZE (mm) 15 20 25 32 40 50 65 80 100 125 150 200 250 300 Kv -– -– -– -– -– 133 240 410 655 900 1800 3550 7350 9100 150 200 250 300 BALL VALVES SIZE (mm) 8 10 15 20 25 32 40 50 65 80 Kv 9 11 20 47 77 1412 198 338 593 82 CHECK VALVES (Schedule 40 Pipe) SIZE (mm) 15 20 25 32 40 50 65 80 100 125 Kv 8.53 15.55 26.27 46.49 64.77 112.24 164.53 254.05 450.16 729.21 1087.59 1949.39 3072.69 4526.25 STRAINERS (Flanged) (BS1387 Medium Grade Steel Pipe) SIZE (mm) 15 20 25 32 40 50 65 80 100 125 150 200 250 300 Kv -– -– -– -– 33 57 91 131 232 372 544 952 1470 2151 STRAINERS (Threaded) (BS1387 Medium Grade Steel Pipe) SIZE (mm) 15 20 25 32 40 50 Kv 4.8 8.8 16.1 25.5 36 68 COMMISSIONING VALVES: (Fixed Orifice Double Regulating Valve - Crane DM941) SIZE (mm) 65 80 100 125 150 200 250 300 Kv 72 100 124 229 324 525 1058 1329 COMMISSIONING VALVES: (Fixed Orifice Double Regulating Valve - Crane D931) SIZE (mm) 15 20 25 32 40 50 Kv 1.87 3.14 5.59 10.8 18.1 29.1 Please do not hesitate to contact us if you require further information, Technical Helpline Tel: +44 (0) 1473 277400 Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 82 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com QUALITY CONTROL Customer Service Control of Substances Hazardous to Health The satisfaction of customer requirements is the defining philosophy of Crane Fluid Systems. The position we hold in our markets is built on the foundations of product availability from our network of distributors and providing expert technical support to users of valves and pipe fittings. Material supplied by Crane Fluid Systems does not constitute “substances” as defined in the approved code of practice of COSHH but complies with the requirements of the Health and Safety at Work Act (1974). Material supplied by Crane may be handled and stored in complete safety. Customers’ orders are received via EDI, fax or telephone by our Customer Service Administrators. Using our stateof-the-art computer-based Enterprise Resource Planning System, we are able to immediately confirm product availability and price. Our computers ensure orders are seamlessly transmitted to our Production Managers who regularly review factory plans to ensure customer requirements are satisfied on time. Comprehensive product selection and application advice is just a phone call away. Our Internal Sales Engineers are equipped to deal with complex valve application needs, receiving customers’ drawings and producing comprehensive valve schedules that will satisfy the design parameters of the heating and ventilating system. Our customers have come to regard this team as one of the most reliable sources of technical support. Crane products are safe to use provided they are utilised for their intended function and used within the limitations specified by Crane. Note: Material is defined as equipment, supplies and spares that form the subject of a contract (ref. BS 4778). Pressure Equipment Directive All Crane Fluid Systems products have been assessed in accordance with the Pressure Equipment Directive (PED) 97/23/EC and the Pressure Equipment Regulations 1999 No. 2001. Each product has been classified into a conformity assessment category based on the intended fluid contents – gas or liquid, the classification of the intended fluid contents – Group 1 or Group 2, the maximum allowable pressure and the nominal size (DN). Quality Assurance Rigid quality control and inspection at all stages of manufacture ensure that Crane products are fully suitable for their intended application and will give reliable service. Every valve and pipe fitting is individually tested in accordance with the relevant product standard. Crane Fluid Systems is an approved manufacturer under various independent quality schemes, including the British Standards Institution (BSI) Kitemark, and is ISO9001 accredited. In addition, the company has been approved and/or listed by various user organisations including the United Kingdom Water Fittings Bye Laws Sheme (WRAS approved). Crane products fall into either the “Sound Engineering Practice” (SEP), Category 1, Category 2 or Category 3. According to the directive, products classified as “SEP” shall not be CE marked. Category 1 products will bear the CE mark and those products classified as Categories 2 and 3 will bear the CE mark plus the number 0086. The number 0086 is that of the British Standards Institute who Crane have chosen as their “Notified Body” to monitor their quality assurance system as required by the directive. Health and Safety at Work Act Every effort is made to ensure that when properly used, in accordance with stated recommendations, goods supplied are safe and without risk to health. Should the purchaser be uncertain as to the suitability for uses other than those stated, he/she should check with the distributor or Crane Fluid Systems' technical team. TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 83 Project Gallery 7-10 Old Bailey, London Domino’s Pizza HQ, Milton Keynes Emirates Football Stadium, London 84 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com Project Gallery Walsall College, Walsall The Apex, Bury St Edmunds Brierley Hill Health & Social Care Centre, Midlands TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com 85 INDEX Index of Figure Numbers FIG NO. PAGE NO. FIG NO. PAGE NO. FIG NO. PAGE NO. 430 80 D180 53 F277 74 440 81 D191 34 F372 70 1900 76 D237 54 F493 42 1910 77 D237A 55 F611 35 C960 5-7 D255C 56 F612 36 19-20 D297 71 F614 37 D4 65 D298 72 F615 38 D14 66 D901 7 F621 35 D15 67 D902 7 F622 36 D16 68 D921 9 F624 37 D138 39 D923 9 F625 38 D140 40 D931 10 F626 35 D151 46 D933 10 F627 36 D151A 47 D934 10 F628 37 D151X 49 D981P 11 F629 38 D155C 48 D983P 11 FM52 58 D156 50 D984P 11 FM57 60 D159 51 D1088 78 FM63 61 D166 52 D1089 79 FM82 62 D171 25 D9601 4 FM276 73 D171A 30 DA931 13 FM278 75 D171AC 32 DA941 14 FM369 69 D171ACEXS 32 DM160 57 FM450 44 D171ACLS 33 DM900 8 FM451 44 D171ACTH 33 DM921 12 FM455 45 D171AEXS 30 DM925G 15 FM469 43 D171ALS 31 DM925L 15 FM492 41 D171ATH 31 DM931 13 P82 18 D171C 28 DM941 14 P83 18 D171CEXS 28 DM950G 16 P84 18 D171CLS 29 DM950L 16 Z3000 22-23 D171CT 29 DM975G 17 Z3010 22-23 D171EXS 25 DPAF951 21 Z3020 22-23 D171LS 26 DPAR951 21 Z3900 22-23 D171MHU 27 F53 59 Z3910 22-23 D171MHULS 27 F58 64 Z3920 22-23 D171T 26 F84 63 Z3300 22-23 CommPac Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. 86 TECHNICAL HELPLINE: +44 (0)1473 277400 www.cranefs.com TELEPHONE: +44 (0)1473 277300 FAX: +44 (0)1473 277301 EMAIL: enquiries@cranefs.com www.cranefs.com FM311 ISO 9001 Visit www.flowoffluids.com to order your copy of the New Technical Paper 410 • Designed and manufactured under quality management systems in accordance with BS EN ISO 9001:2008 • We hope our communications have an impact on you - but not the environment - we have taken steps to ensure this brochure is printed on Forestry Stewardship Council material and the paper is made by a totally chlorine free process. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors or omissions or for any misinterpretation of the information within the publication and reserves the right to change without notice. www.cranebsu.com ISSUE ONE CRANE HOUSE, EPSILON TERRACE WEST ROAD, IPSWICH SUFFOLK IP3 9FJ