CryptoServer LAN Manual For System Administrators Crypto Server Systemadministrators
User Manual:
Open the PDF directly: View PDF
Page Count: 142 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- 1 Introduction
- 2 The CryptoServer LAN - Overview
- 3 Bringing the CryptoServer LAN into Operation
- 4 Administering the CryptoServer LAN
- 4.1 Connecting the PIN pad
- 4.2 Setting up the PIN Pad on the CryptoServer LAN
- 4.3 Generating New Keys for the SSH Daemon
- 4.4 Setting up DHCP
- 4.5 Enabling SNMP and SNMP Traps
- 4.6 Exporting/Importing the File csxlan.conf
- 4.7 Specifying the Keyboard Layout
- 4.8 Displaying the Date and Time on the CryptoServer LAN
- 4.9 Setting the Date and Time on the CryptoServer LAN Manually
- 4.10 Transferring the Time from the CryptoServer to the CryptoServer LAN
- 4.11 Viewing CryptoServer LAN Information
- 4.12 Enabling the Trace Level
- 4.13 Exporting the Trace Files
- 4.14 Displaying the Network Configuration
- 4.15 Checking Reachability in the Network (ping)
- 4.16 Performing a Self-Test
- 4.17 Selecting a Boot Partition
- 4.18 Updating the Operating System
- 4.19 Resetting the Configuration of the CryptoServer LAN
- 4.20 Rebooting the CryptoServer LAN
- 4.21 Switching off the CryptoServer LAN
- 5 Administering the CryptoServer
- 5.1 Displaying the CryptoServer Status
- 5.2 Resetting an Alarm
- 5.3 Displaying the Battery Status
- 5.4 Displaying Files in the CryptoServer
- 5.5 Listing Current Firmware Modules
- 5.6 Displaying Users
- 5.7 Displaying the Boot Log
- 5.8 Displaying the Audit Log
- 5.9 Exporting the Audit Log
- 5.10 Configuring the Audit Log
- 5.11 Displaying the Date and Time on the CryptoServer
- 5.12 Displaying Memory Information
- 5.13 Displaying Driver Information
- 5.14 Loading Files onto the CryptoServer
- 5.15 Deleting Files in the CryptoServer
- 5.16 Transferring the Tme from the CryptoServer LAN to the CryptoServer
- 5.17 Restarting the CryptoServer
- 5.18 Changing the ADMIN Authentication Key
- 5.19 Loading the Firmware Encryption Key into the CryptoServer
- 5.20 Changing to Maintenance Mode
- 5.21 Clear Command
- 5.22 Performing Clear to Factory Settings
- 5.23 Performing MBK Management on the CryptoServer LAN
- 5.23.1 Using the PIN Pad to Import an MBK
- 5.23.2 Importing an MBK (DES) from a Smartcard
- 5.23.3 Importing an MBK (AES) from a Smartcard
- 5.23.4 Generating an MBK (AES) on a Smartcard
- 5.23.5 Displaying MBK Key Information on the Smartcard
- 5.23.6 Copying an MBK from One Smartcard to Another
- 5.23.7 Changing the PIN for the MBK Smartcard
- 5.23.8 Using the PIN Pad to Import an MBK and Save it to a Smartcard
- 5.23.9 Generating an AES Key and Saving It to a Smartcard
- 6 Setting up NTP
- 7 Configuring NTP
- 8 Advanced Administration on the CryptoServer LAN
- 9 Contact Address for Support Queries
- Appendix A SNMP Objects and SNMP Traps