Publication D39712880 Edwards TIC Instruction Manual

• Contents
• Illustrations
• Tables
• 1 Introduction
  • 1.1 Scope and definitions
  • 1.2 Product description
• 2 Technical data
  • 2.1 Electrical data
  • 2.2 Operating and storage data
  • 2.3 Mechanical data
  • 2.4 Connections
    • 2.4.1 Turbo pump connector
    • 2.4.2 Backing pump connector
    • 2.4.3 Auxiliary terminals
    • 2.4.4 Logic interface
    • 2.4.5 Serial communications
• 3 Installation
  • 3.1 Unpack and inspect
  • 3.2 Fitting the controller
  • 3.3 Controller electrical connections
    • 3.3.1 Connecting the electrical supply
    • 3.3.2 Additional earth bonding
    • 3.3.3 Connecting a turbo pump
    • 3.3.4 Connecting a backing pump
    • 3.3.5 Connecting a vent valve
    • 3.3.6 Connecting an air cooler
    • 3.3.7 Connecting the logic interface
    • 3.3.8 Connecting the serial interface
• 4 Operation
  • 4.1 Front panel description
  • 4.2 Menu structure
  • 4.3 Navigating the menu
  • 4.4 The view screen
  • 4.5 Turning pumps and relays on/off
  • 4.6 Changing list items
  • 4.7 Changing numerical values
  • 4.8 Turbo setup
    • 4.8.1 Introduction
    • 4.8.2 Default turbo setup options
    • 4.8.3 Additional setup options using a DX or nEXT pump
  • 4.9 Backing setup
  • 4.10 Alarms
  • 4.11 The main menu
  • 4.12 Turbo status
  • 4.13 Backing status
  • 4.14 Parameters/units
  • 4.15 Relay setpoint outputs
  • 4.16 Service information
  • 4.17 Electrical supply failure
• 5 Maintenance
  • 5.1 Safety
  • 5.2 Fault finding
  • 5.3 Cleaning the controller
  • 5.4 Software updates
  • 5.5 Factory defaults
• 6 Storage and disposal
  • 6.1 Storage
  • 6.2 Disposal
• 7 Service, spares and accessories
  • 7.1 Introduction
  • 7.2 Service
  • 7.3 Spares
  • 7.4 Accessories