E5K50UD DVBD507

User Manual: DVBD507

Open the PDF directly: View PDF .
Page Count: 54

Download
Open PDF In Browser	View PDF

DV-BD507

SERVICE MANUAL

Ref. No. 4149
072009

BLU-RAY DISC PLAYER
MODEL DV-BD507(B)CDC1N

RC-730DV

Black model
B CDC1N 120 V AC, 60Hz

SAFETY-RELATED COMPONENT
WARNING!!
COMPONENTS IDENTIFIED BY MARK

ON THE

SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.

TABLE OF CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1-1
Laser Beam Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2-1
Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3-1
Standard Notes for Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4-1
Cabinet Disassembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5-1
How to Initialize the BLU-RAY Disc Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6-1
Firmware Renewal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7-1
Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8-1
Schematic Diagrams / CBA and Test Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9-1
Exploded Views. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10-1
Mechanical Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11-1
Electrical Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-12-1

Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.

SPECIFICATIONS

1-1-1

E5K50SP

LASER BEAM SAFETY PRECAUTIONS
This BD player uses a pickup that emits a laser beam.

Do not look directly at the laser beam coming
from the pickup or allow it to strike against your
skin.

The laser beam is emitted from the location shown in the figure. When checking the laser diode, be sure to keep
your eyes at least 30 cm away from the pickup lens when the diode is turned on. Do not look directly at the laser
beam.
CAUTION: Use of controls and adjustments, or doing procedures other than those specified herein, may result in
hazardous radiation exposure.

Drive Mechanism Assembly

Laser Beam Radiation

Laser Pickup

Turntable

Location: Inside Top of BD mechanism.

1-2-1

B2NLBSP

IMPORTANT SAFETY PRECAUTIONS
Product Safety Notice
Some electrical and mechanical parts have special
safety-related characteristics which are often not
evident from visual inspection, nor can the protection
they give necessarily be obtained by replacing them
with components rated for higher voltage, wattage,
etc. Parts that have special safety characteristics are
identified by a # on schematics and in parts lists. Use
of a substitute replacement that does not have the
same safety characteristics as the recommended
replacement part might create shock, fire, and/or other
hazards. The Product’s Safety is under review
continuously and new instructions are issued
whenever appropriate. Prior to shipment from the
factory, our products are carefully inspected to confirm
with the recognized product safety and electrical
codes of the countries in which they are to be sold.
However, in order to maintain such compliance, it is
equally important to implement the following
precautions when a set is being serviced.

I.

Also check areas surrounding repaired locations.

J. Be careful that foreign objects (screws, solder
droplets, etc.) do not remain inside the set.
K. When connecting or disconnecting the internal
connectors, first, disconnect the AC plug from the
AC outlet.

Precautions during Servicing
A. Parts identified by the # symbol are critical for
safety. Replace only with part number specified.
B. In addition to safety, other parts and assemblies
are specified for conformance with regulations
applying to spurious radiation. These must also be
replaced only with specified replacements.
Examples: RF converters, RF cables, noise
blocking capacitors, and noise blocking filters, etc.
C. Use specified internal wiring. Note especially:
1) Wires covered with PVC tubing
2) Double insulated wires
3) High voltage leads
D. Use specified insulating materials for hazardous
live parts. Note especially:
1) Insulation tape
2) PVC tubing
3) Spacers
4) Insulators for transistors
E. When replacing AC primary side components
(transformers, power cord, etc.), wrap ends of
wires securely about the terminals before
soldering.
F. Observe that the wires do not contact heat
producing parts (heat sinks, oxide metal film
resistors, fusible resistors, etc.).
G. Check that replaced wires do not contact sharp
edges or pointed parts.
H. When a power cord has been replaced, check that
5 - 6 kg of force in any direction will not loosen it.

1-3-1

BDN_ISP

Safety Check after Servicing
Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts, and
wires have been returned to their original positions. Afterwards, do the following tests and confirm the specified
values to verify compliance with safety standards.

1. Clearance Distance
When replacing primary circuit components, confirm
specified clearance distance (d) and (d’) between
soldered terminals, and between terminals and
surrounding metallic parts. (See Fig. 1)

Chassis or Secondary Conductor
Primary Circuit

Table 1: Ratings for selected area
AC Line Voltage

Clearance Distance (d), (d’)

120 V

≥ 3mm(d)
≥ 4mm(d’)

d'

d

Note: This table is unofficial and for reference only. Be
sure to confirm the precise values.

Fig. 1

2. Leakage Current Test
Confirm the specified (or lower) leakage current
between B (earth ground, power cord plug prongs) and
externally exposed accessible parts (RF terminals,
antenna terminals, video and audio input and output
terminals, microphone jacks, earphone jacks, etc.) is
lower than or equal to the specified value in the table
below.

Exposed Accessible Part

Z

Measuring Method (Power ON):
Insert load Z between B (earth ground, power cord plug
prongs) and exposed accessible parts. Use an AC
voltmeter to measure across the terminals of load Z.
See Fig. 2 and the following table.

B

AC Voltmeter
(High Impedance)

One side of
Power Cord Plug Prongs

Fig. 2

Table 2: Leakage current ratings for selected areas
AC Line Voltage

120 V

Load Z

Leakage Current (i)

One side of power cord plug
prongs (B) to:

2kΩ RES.
Connected in
parallel

i≤0.7mA AC Peak
i≤2mA DC

RF or
Antenna terminals

50kΩ RES.
Connected in
parallel

i≤0.7mA AC Peak
i≤2mA DC

A/V Input, Output

Note:This table is unofficial and for reference only. Be sure to confirm the precise values.

1-3-2

BDN_ISP

STANDARD NOTES FOR SERVICING
Circuit Board Indications

Pb (Lead) Free Solder

1. The output pin of the 3 pin Regulator ICs is
indicated as shown.

When soldering, be sure to use the Pb free solder.

How to Remove / Install Flat Pack-IC
Top View
Out

Bottom View
In

Input

1. Removal
With Hot-Air Flat Pack-IC Desoldering Machine:

2. For other ICs, pin 1 and every fifth pin are
indicated as shown.

1. Prepare the hot-air flat pack-IC desoldering
machine, then apply hot air to the Flat Pack-IC
(about 5 to 6 seconds). (Fig. S-1-1)

5
Pin 1

10
3. The 1st pin of every male connector is indicated as
shown.

Fig. S-1-1

Pin 1

Instructions for Connectors
1. When you connect or disconnect the FFC (Flexible
Foil Connector) cable, be sure to first disconnect
the AC cord.
2. FFC (Flexible Foil Connector) cable should be
inserted parallel into the connector, not at an
angle.

2. Remove the flat pack-IC with tweezers while
applying the hot air.
3. Bottom of the flat pack-IC is fixed with glue to the
CBA; when removing entire flat pack-IC, first apply
soldering iron to center of the flat pack-IC and heat
up. Then remove (glue will be melted). (Fig. S-1-6)
4. Release the flat pack-IC from the CBA using
tweezers. (Fig. S-1-6)
CAUTION:
1. The Flat Pack-IC shape may differ by models. Use
an appropriate hot-air flat pack-IC desoldering
machine, whose shape matches that of the Flat
Pack-IC.

FFC Cable

Connector

2. Do not supply hot air to the chip parts around the
flat pack-IC for over 6 seconds because damage
to the chip parts may occur. Put masking tape
around the flat pack-IC to protect other parts from
damage. (Fig. S-1-2)

CBA

* Be careful to avoid a short circuit.

1-4-1

BDN_SN

3. The flat pack-IC on the CBA is affixed with glue, so
be careful not to break or damage the foil of each
pin or the solder lands under the IC when
removing it.

CBA

With Soldering Iron:
1. Using desoldering braid, remove the solder from
all pins of the flat pack-IC. When you use solder
flux which is applied to all pins of the flat pack-IC,
you can remove it easily. (Fig. S-1-3)

Hot-air
Flat Pack-IC
Desoldering
Machine

Flat Pack-IC

Desoldering Braid

Soldering Iron
Masking
Tape
Tweezers

Flat Pack-IC

Fig. S-1-2

Fig. S-1-3
2. Lift each lead of the flat pack-IC upward one by
one, using a sharp pin or wire to which solder will
not adhere (iron wire). When heating the pins, use
a fine tip soldering iron or a hot air desoldering
machine. (Fig. S-1-4)

Sharp
Pin
Fine Tip
Soldering Iron

Fig. S-1-4

3. Bottom of the flat pack-IC is fixed with glue to the
CBA; when removing entire flat pack-IC, first apply
soldering iron to center of the flat pack-IC and heat
up. Then remove (glue will be melted). (Fig. S-1-6)
4. Release the flat pack-IC from the CBA using
tweezers. (Fig. S-1-6)

1-4-2

BDN_SN

With Iron Wire:

2. Installation

1. Using desoldering braid, remove the solder from
all pins of the flat pack-IC. When you use solder
flux which is applied to all pins of the flat pack-IC,
you can remove it easily. (Fig. S-1-3)

1. Using desoldering braid, remove the solder from
the foil of each pin of the flat pack-IC on the CBA
so you can install a replacement flat pack-IC more
easily.

2. Affix the wire to a workbench or solid mounting
point, as shown in Fig. S-1-5.

2. The “●” mark on the flat pack-IC indicates pin 1.
(See Fig. S-1-7.) Be sure this mark matches the
pin 1 on the PCB when positioning for installation.
Then presolder the four corners of the flat pack-IC.
(See Fig. S-1-8.)

3. While heating the pins using a fine tip soldering
iron or hot air blower, pull up the wire as the solder
melts so as to lift the IC leads from the CBA
contact pads as shown in Fig. S-1-5.
4. Bottom of the flat pack-IC is fixed with glue to the
CBA; when removing entire flat pack-IC, first apply
soldering iron to center of the flat pack-IC and heat
up. Then remove (glue will be melted). (Fig. S-1-6)

3. Solder all pins of the flat pack-IC. Be sure that
none of the pins have solder bridges.

Example :

5. Release the flat pack-IC from the CBA using
tweezers. (Fig. S-1-6)
Note: When using a soldering iron, care must be
taken to ensure that the flat pack-IC is not
being held by glue. When the flat pack-IC is
removed from the CBA, handle it gently
because it may be damaged if force is applied.

Pin 1 of the Flat Pack-IC
is indicated by a " " mark.

Hot Air Blower

or

Fig. S-1-7

Presolder

Iron Wire
Soldering Iron
To Solid
Mounting Point
Fig. S-1-5
Flat Pack-IC
CBA
CBA

Fig. S-1-8

Fine Tip
Soldering Iron

Flat Pack-IC
Tweezers
Fig. S-1-6

1-4-3

BDN_SN

Instructions for Handling Semiconductors
Electrostatic breakdown of the semi-conductors may
occur due to a potential difference caused by
electrostatic charge during unpacking or repair work.

1. Ground for Human Body
Be sure to wear a grounding band (1 MΩ) that is
properly grounded to remove any static electricity that
may be charged on the body.

2. Ground for Workbench
Be sure to place a conductive sheet or copper plate
with proper grounding (1 MΩ) on the workbench or
other surface, where the semi-conductors are to be
placed. Because the static electricity charge on
clothing will not escape through the body grounding
band, be careful to avoid contacting semi-conductors
with your clothing.



CBA



Grounding Band

1MΩ

CBA

1MΩ
Conductive Sheet or
Copper Plate

1-4-4

BDN_SN

CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart

ID/
Loc.
No.

This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
[1] Top Cover

[3] Front CBA

[2] Front Assembly

[4] Power SW CBA

[5] BD Main CBA &
BD Mechanism Assembly

Part

Fig.
No.

Remove/*Unhook/
Unlock/Release/
Unplug/Desolder

Note

[12]

Power
Holder

D5 (S-12)

---

[13]

Shield
Bracket

D5 4(S-13)

---

[14]

SD PCB
Bracket

D5 (S-14)

---

↓
(1)

[6] SD-A CBA

Removal

↓
(2)

↓
(3)

↓
(4)

↓
(5)

Note:
(1) Identification (location) No. of parts in the figures

[7] SD-B CBA

[13] Shield Bracket

[8] SD-C CBA

[14] SD PCB Bracket

[9] Rear Panel

[10] Motor DC Fan

(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)

[11] AV CBA
[12] Power Holder

2. Disassembly Method
ID/
Loc.
No.
[1]

(5) Refer to “Reference Notes.”

Removal
Part

Fig.
No.

Remove/*Unhook/
Unlock/Release/
Unplug/Desolder

Reference Notes
Note

Top Cover

D1 9(S-1)

---

[2]

Front
Assembly

*5(L-1), *3(L-2),
D2 *5(S-2) *CN2002,
*CN3001

1

[3]

Front CBA

D2 ---------------

---

[4]

Power SW
CBA

D2 ---------------

---

[5]

(S-3), 2(S-4), 4(S-5),
BD Main
2(S-6), 4(S-7),
CBA & BD
*CN6001, *CN7101,
D3
Mechanism
*CN7601, Main PCB
Assembly
Earth Plate, Front
Shield

2

[6]

SD-A CBA

D3 Desolder

---

[7]

SD-B CBA

D3 Desolder

---

[8]

SD-C CBA

D3 ---------------

---

[9]

Rear Panel

D4

[10]

Motor DC
Fan

D4 *CN2004, Fan Holder

---

D5 5(S-11)

---

[11] AV CBA

2(S-8), 4(S-9),
2(S-10)

1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
2. The BD Main CBA & BD Mechanism Assembly
is adjusted as a unit at factory. Therefore, do
not disassemble it. Replace the BD Main CBA
& BD Mechanism Assembly as a unit.

---

1-5-1

E5K50DC

[5] *BD Main
CBA & BD
Mechanism
Assembly

(S-1)

(S-1)

Main PCB
Earth Plate
(S-6)

(S-5)

[6] SD-A CBA
[1] Top Cover

CN7101
(S-7)
(S-1)

CN6001
CN7601

(S-7)

Front Shield

[7] SD-B CBA
[8] SD-C CBA
(S-4)
(S-3)

Fig. D1

Fig. D3

* See Reference Notes 2.

[4] Power SW
(S-2)
CBA
(L-1)

[9] Rear Panel

CN2002

(S-8)

(S-2)

[3] Front CBA

(S-8)

(S-2)

(S-9)
(S-10)

CN3001
(L-2)
(L-1)

[2] Front Assembly
(L-2)

Fig. D2

[10] Motor
DC Fan
Fan Holder
CN2004

Fig. D4

1-5-2

E5K50DC

(S-11)

[11] AV CBA
[12] Power Holder
(S-12)

(S-13)

[14] SD PCB
Bracket (S-14)
[13] Shield
Bracket

Fig. D5

1-5-3

E5K50DC

3. How to Eject Manually
1. Remove the Top Cover.
2. Insert a screwdriver, etc. into the Hole A straightly so that the Portion A is pushed.
3. Pull the tray out manually and remove a disc.

Portion A

1-5-4

Screwdriver,
hexagon wrench

E5K50DC

HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
To put the program back at the factory-default,
initialize the BD player as the following procedure.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. a appears on the screen.
"*******" differ depending on the models.

Version Info
F/W Name
Version
Region

: *******
: *.***
: *-*

EEPROM CLEAR 

EXIT 

Fig. a
4. Press [ C ] button on the remote control unit.
Fig. b appears on the screen and Fig. c appears
on the VFD.
"*******" differ depending on the models.

Version Info
F/W Name
Version
Region

: *******
: *.***
: *-*

EEPROM CLEAR : OK
EEPROM CLEAR 

EXIT 

Fig. b

Fig. c
5. To exit this mode, press [ON/STANDBY] button.

1-6-1

E5K50INT

FIRMWARE RENEWAL MODE
The appearance shown in (*1) of Fig. c is
described as follows:

Note: The file extension of the available firmware is
“b20”.
1. Turn the power on and remove the disc on the tray
and close the tray.

No.
1

2. To put the BD player into version up mode, press
[9], [8], [7], [6], and [POP UP MENU/MENU]
buttons on the remote control unit in that order.
The tray will open automatically.
Fig. a appears on the screen and Fig. b appears
on the VFD.
"*******" differs depending on the models.
F/W VERSION UP MODE

F/W Name: *******

Appearance

State

Now Loading... Loading the disc
Sending files into the
memory.
After reading, automatically
the tray opens.

2

Reading...

3

Writing new version data,
See FL Display the progress will be displayed
as shown in Fig. e.

Ver. *.***

Fig. e VFD in Vresion Up Mode

Please insert a Disc
for F/W Version Up

5. After programming is finished, the checksum on
the VFD (Fig. f).

Fig. a Version Up Mode Screen
Fig. f VFD upon Finishing the Programming Mode (Example)
Checksum appears on the VFD then the tray will
open automatically. Remove the disc on the tray.
Fig. b VFD in Version Up Mode
3. Load the disc for version up.
4. The BD player enters the F/W version up mode
automatically. Fig. c appears on the screen and
Fig. d appears on the VFD. Make sure to insert the
proper F/W for the state of this model.
"*******" differs depending on the models.
F/W VERSION UP MODE

F/W Name: *******

At this time, no button is available.
6. Unplug the AC cord from the AC outlet. Then plug
it again.
7. Turn the power on.
8. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. g appears on the screen.
"*******" differ depending on the models.

Ver. *.***

Version Info
1. ALL
(*1)

Ver. *.***
Now Loading...

F/W Name
Version
Region

************A*.b20

: *******
: *.***
: *-*

EXIT : POWER
EEPROM CLEAR 

Fig. c Programming Mode Screen (Example)

EXIT 

Fig. g

Fig. d VFD in Programming Mode (Example)

1-7-1

E5K50FW

9. Press [ C ] button on the remote control unit.
Fig. h appears on the screen and Fig. i appears on
the VFD.
"*******" differ depending on the models.

Version Info
F/W Name
Version
Region

: *******
: *.***
: *-*

How to Verify the Firmware Version
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. j appears on the screen.
"*******" differ depending on the models.

Version Info

EEPROM CLEAR : OK
EEPROM CLEAR 

F/W Name
Version
Region

EXIT 

: *******
: *.***
: *-*

Fig. h
EEPROM CLEAR 

Fig. j

Fig. i
10. To exit this mode, press [ON/STANDBY] button.

EXIT 

4. To exit this mode, press [ON/STANDBY] button.

1-7-2

E5K50FW

20
21
22
23
28

39
38
36
35
33

1-8-1

3
6

10
9

CEC 13

2

XRST T34

RESET 1

CN7101
8 SUB-TXD
7 SUB-RXD
9 SYS-RESET

CN7101
2 CEC

Q6701

Q6702

RXD1 U34
TXD1 V32

XTRST AE32

IC6701

RX(-)

RX(+)

TX(-)

CN2001
8
7
9

CN2001
2
Q2619
BUFFER

Q2618
BUFFER

Q2620, Q2621
SWITCHING

8MHz
X'TAL

X2000

RESET
RESET

AV CBA

15 SUB-TXD
16 SUB-RXD
3 SYS-RESET

28 CEC-IN
30 CEC-OUT

8 OSC1
9 OSC2

14

4
37
31
32
63
25
26

33
34
49
50
27
KEY-1 62

FL-SDA
FL-SCL
FL-STB
FL-RESET
REMOTE

POWER-LED 56

AUDIO-MUTE 24

PWSW1
PWSW2
A33-PW-CONT
FL-SW
FAN-LOCK
FAN-CONT1
FAN-CONT2

MUTE1 21
MUTE2 22

IC2000
(SUB MICRO CONTROLLER)

CN2002
18
17
16
15
9
5
6

FL-SDA
FL-SCL
FL-STB
FL-RESET
REMOTE
POWER-LED
KEY-1

CN3000
16
15
14
13
7
3
4

AUDIO-MUTE

PWSW1
PWSW2
A33-PW-CONT
FL-SW
FAN-LOCK
FAN-CONT1
FAN-CONT2

MUTE1
MUTE2

D3007
POWER

POWER SW CBA

SW3007
POWER

WX3000

CN3001

EV+5V

RS3000
REMOTE
SENSOR

Q3000

KEY
SWITCH

19 20 21 22

VFD

FL3000

FRONT CBA

TO AUDIO
BLOCK DIAGRAM

TO POWER SUPPLY
BLOCK DIAGRAM

TO VIDEO
BLOCK DIAGRAM

1 POWER-LED 1
2 KEY-1
2

BD MAIN CBA

P-ON+1.8V

MII-RXCLK
MII-RXD0
MII-RXD1
MII-RXD2
MII-RXD3
MII-TXCLK
MII-TXD0
MII-TXD1
MII-TXD2
MII-TXD3

V31 SCL0
W30 SDA0

IC6001
(MAIN MICRO CONTROLLER)

5 SDA
6 SCL

J4
J3
J1
J2
K2
H4
G4
H5
F4
G5

2

11

TX(+)

JK7501

1

JK6401
ETHERNET JACK
12

IC6903 (EEPROM)

ETHERNET
INTERFACE

IC6401
(ETHERNET INTERFACE)

EV+3.3V

IC2001

BLOCK DIAGRAMS

System Control Block Diagram

E5K50BLS

1-8-2

SPINDLE
MOTOR

TRAY-IN

TRAY-OUT

LOADING
MOTOR

SLED
MOTOR

LASER
DIODE
DRIVE

OEIC
(BD)

OEIC
(CD/DVD)

INNER
SW

BD MECHANISM

CN602
5
6
2
1
4

LOAD(+)
LOAD(-)
TRAY-OUT
TRAY-IN
INLIMIT

CN603
1
2
3
5
6
7
8
9
10
11

CN601
4
3
2
1

SLD2(+)
SLD2(-)
SLD1(+)
SLD1(-)

W
V
U
HU(+)
HU(-)
HV(+)
HV(-)
HW(+)
HW(-)
HB(-)

CN101
3
4
1
2
6
5
9
7
10
8

TD
TR
FD1
FR1
FD2
FR2
EXPA(+)
EXPA(-)
EXPB(+)
EXPB(-)

CN101
A-D 21-24
E-H 26-29
RF(+) 17
RF(-) 18
BDRF(+) 14
BDRF(-) 15
SDATA2 40
SCLK2 38
97-100
102-105
107-110
86
85
88
87

24
21
19
13
14
15
16
17
18
12

14
15

32
33
2
1

SPINDLE
MOTOR
DRIVE

IC601 (MOTOR DRIVE)

LOADING
MOTOR DRIVE

SLED
MOTOR DRIVE

IC603 (MOTOR DRIVE)

COLLIMATE
LENS
MOTOR DRIVE

IC602 (MOTOR DRIVE)

4

10

13

4
30

13
10

12

FOCUS 2
ACTUATOR
DRIVE

17
16

2
3
6
5

23

22

FOCUS 1
ACTUATOR
DRIVE

TRACKING
ACTUATOR
DRIVE

IC603 (MOTOR DRIVE)

19
18

21
20

83

RF
GENERATOR

MATRIX

MPX

8

7

1

9

6

2

IC604 (OP AMP)

53
54

65
66

18
20
59
61

BD MAIN CBA

78 79

SCLK1
SDATA1

RF
EQUALIZER

WOB
/LPP

IC201 (FRONT-END PROCESSOR)

SCLK1
SDATA1
SDATA2
SCLK2

SE01
SE02
ASENV
WBL

B25 SPINDLE-FG

E24 SPINDLE-CONTROL

D21 TRAY-OUT
E21 TRAY-IN
B3 INLIMIT

C22 LOAD-CONTROL

C24 SLED1-CONTROL
D24 SLED2-CONTROL

B22 EXPA-CONTROL
D22 EXPB-CONTROL

D23 FOCUS2-CONTROL

A24 FOCUS1-CONTROL

FE
DIGITAL
SIGNAL
PROCESS

AACS
BD+
CSS
CPRM

COPY
PROTECT

STREAM
CONTROL

IC6001 (MAIN MICRO CONTROLLER/DIGITAL SIGNAL PROCESS)

E23 TRACKING-CONTROL

J33
J34
M31
M32

C33
B34

A28
B28
H34
G34

TO DIGITAL SIGNAL
PROCESS 2 BLOCK
DIAGRAM
(IC6001)

VIDEO SIGNAL

AUDIO SIGNAL

Digital Signal Process 1 Block Diagram

E5K50BLD1

SD
CARD
SLOT

11
13
1
3
9

CN4004

SDDAT0
SDDAT1
SDDAT2
SDDAT3
SDCLK

BD MAIN CBA

CN4002

SD-C CBA

5
3
15
13
7

SDDAT0
SDDAT1
SDDAT2
SDDAT3
SDCLK

1-8-3

NAND FLASH
MEMORY (64M x 8bit)

DDR2 SDRAM
(512Mbit)

IC6601,IC6602
(DDR2 SDRAM)

DDR2 SDRAM
(1Gbit )

IC6501,IC6502
(DDR2 SDRAM)

SD-A CBA

11
13
1
3
9

CN4003 CN4001
11
13
1
3
9

IC6902
(NAND FLASH MEMORY)

11
13
1
3
9

CN4102 CN4101

SD-B CBA

C1A (0-12)

SD DATA(0-3)

CN7601
6
4
16
14
8

C1DQ (0-31)

C0A (0-12)

C0DQ (0-31)

ED (0-7)

SDDAT0
SDDAT1
SDDAT2
SDDAT3
SDCLK

SD I/F

MEMORY
I/F

FROM
DIGITAL
SIGNAL
PROCESS 1
BLOCK
DIAGRAM
(IC6001)

AH34 SDCLK

AF32,AG34,
AH33,AJ34

SD (PS)

HD (TS)

MPEG-2
DiVX
VC-1
H.264
DECODER

Java (BD-J)

MEDIA
PROCESSOR

SCL3
SDA3

CLK
VSYNC
HSYNC

DIGITAL
AUDIO
OUT

R33
U31

C14
B14
A12
D12
B13
B12
A13
AC31

E13
B10
B11
A10
A11
D11
C12
C10

7
8
9
10

CLOCK
GENE.

1
16

SCL 2
SDA 3

IC6703
(CLOCK GENE.)

A3,A6,A7,B7,C4,C6,C7,
C8,D6,D9,E8,E12

A4,A8,A9,B4,B9,C5,C9,
C11,D8,D10,E10,E11

A2
B6
B5

C15
D18
B17
F17

33M CLOCK AL5
33M CLOCK AL34
74M CLOCK E20
27M CLOCK A19
768K CLOCK D20

I/P CONVERTER
/SCALING

DIGITAL
VIDEO
OUT

VIDEO
DAC

IC6001 (MAIN MICRO CONTROLLER/DIGITAL SIGNAL PROCESS)

MC
MD
DAC-SCK
DAC-BCK
DAC-LRCK
SPDIF
DATA
MS1

HDMI-DATA0
HDMI-DATA1
HDMI-DATA2
HDMI-DATA3
HDMI-MCK
HDMI-BCK
HDMI-LRCK
HDMI-SPDIF

27MHz
OSC

X6701

SCL3
SDA3

PRMY(0-11)

PRMC(0-11)

PRMCLK
PRMVS
PRMHS

VIDEO
VIDEO-Y(I/P)
VIDEO-Pb/Cb
VIDEO-Pr/Cr

VIDEO SIGNAL

TO
AUDIO
BLOCK
DIAGRAM

TO
VIDEO
BLOCK
DIAGRAM

TO
VIDEO
BLOCK
DIAGRAM

AUDIO SIGNAL

Digital Signal Process 2 Block Diagram

E5K50BLD2

1-8-4

TO DIGITAL
SIGNAL
PROCESS 2
BLOCK DIAGRAM

TO DIGITAL
SIGNAL
PROCESS 2
BLOCK DIAGRAM

HDMI-DATA0
HDMI-DATA1
HDMI-DATA2
HDMI-DATA3
HDMI-MCK
HDMI-BCK
HDMI-LRCK
HDMI-SPDIF

PRMY(0-11)

PRMC(0-11)

PRMCLK
PRMVS
PRMHS

SCL3
SDA3

VIDEO
VIDEO-Y(I/P)
VIDEO-Pb/Cb
VIDEO-Pr/Cr

BD MAIN CBA

CN7101
14
16
18
20
VIDEO
VIDEO-Y(I/P)
VIDEO-Pb/Cb
VIDEO-Pr/Cr

IIC
I/F

46
44
45
42
41
39
36
35

70-73,75-78,
92,94,102,103

50,51,53-57,59,
87,88,90,91

121 CLK
83 VS
84 HS

113
116

MUTE1
MUTE2

VIDEO
I/F

REGISTER

IC7501 (HDMI INTERFACE)

TO SYSTEM CONTROL
BLOCK DIAGRAM

CN2001
14
16
18
20

4dB
AMP
4dB
AMP
4dB
AMP

8

10

12

AUTHENT
/CATION
KEY
EXCHANGE

2 MUTE1
13 MUTE2

4dB
AMP

3

25

20

17

15

75Ω
DRIVER

75Ω
DRIVER
75Ω
DRIVER
75Ω
DRIVER

2dB
LPF
AMP
13.5/37MHz
2dB
LPF
AMP
13.5/37MHz
2dB
LPF
AMP
13.5/37MHz

DDC
I/F

VIDEO-Pr/Cr
OUT

VIDEO-Pb/Cb
OUT

VIDEO-Y
OUT

VIDEO OUT
(COMPOSITE)

T.M.D.S DATA1+
T.M.D.S DATA0T.M.D.S DATA0+

1
6
4
9
7

10 T.M.D.S CLOCK+
12 T.M.D.S CLOCK-

19
21
15
17
13
11

T.M.D.S DATA1-

T.M.D.S DATA2+

3

T.M.D.S DATA2-

16 DDC DATA

JK7501
HDMI-CONNECTOR
19 HOT PLUG
DETECT
15 DDC CLOCK

JK2300

JK2200

25

C2323

AUDIO SIGNAL

23

119

120

118

LPF
6.75MHz

2dB
AMP

IC2300 (VIDEO DRIVER)

AV CBA

VIDEO SIGNAL

Video Block Diagram

TMDS
SERIALIZER

TMDS
ENCODER

HDCP
CIPHER/
ENCRYPTOR

AV
CONTROLLER

AUDIO
I/F

E5K50BLV

TO DIGITAL
SIGNAL
PROCESS 2
BLOCK DIAGRAM

1-8-5

SPDIF

MC
MD
DAC-SCK
DAC-BCK
DAC-LRCK
MS1
DATA
AUDIO
DAC

BD MAIN CBA

3
4
5
7
8
2
6

R-CH
MUTE

L-CH
MUTE

16

1

(L-CH)
15
(R-CH)
14

IC7001
(AUDIO D/A CONVERTER)
CN7101
24
22
26
25
5

CN2001
AUDIO(L)
24
AUDIO(R)
22
AUDIO(L)-MUTE 26
AUDIO(R)-MUTE 25
SPDIF
5

TO SYSTEM CONTROL
BLOCK DIAGRAM

2

6

1

7

AUDIO-MUTE

IC2200
(OP AMP)

AV CBA

Q2100
BUFFER

Q2201
DRIVE

Q2200
DRIVE

Q2202
MUTE-ON

Q2203
MUTE-ON

DIGITAL
AUDIO OUT
(COAXIAL)

DIGITAL
AUDIO OUT
(OPTICAL)

JK2400 (REAR)

JK2100
(REAR)

AUDIO(R)OUT

AUDIO(L)OUT

JK2200 (REAR)

AUDIO SIGNAL

Audio Block Diagram

E5K50BLA

AC1001
AC CORD

V

3

1

2

1-8-6

HOT

VDD
6

SWITCHING
CONTROL

5

BRIDGE
RECTIFIER

D1001 - D1004

IC1001
(SWITCHING CONTROL)

F1001 L1001
2A 250V
LINE
FILTER

A

F

HOT CIRCUIT. BE CAREFUL.

14

6

1

2

4

3

SHUNT
REG.

IC1003
ERROR
VOLTAGE DET

16

9

10

13

15

12

11

7

IC1011
ERROR
VOLTAGE DET

Q1003

4

2

T1001

CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.

COLD

A

F

+3.3V
REG.

Q1011

V

Q2602

Q2605

SW+5V

Q2604

Q2601

Q2612

AV CBA

Q2613

+1.8V
REG.

IC2602

FAN

SW+10.5V

CN2004
1
2

Q2014

FAN
CONTROL

Q2012

IC2600

+3.3V
REG.

Q2101

+1.2V
REG.

IC2601

SW+5V

Q2606

SW+14.5V

Q2603

SW+3.3V

Q2204,Q2205

(LOW SPEED)

Q2600

CURRENT
LIMIT

Q2608, Q2609

Q2607

FAN-VCC
FAN-LOCK

Q2000,Q2001

(HIGH SPEED)

FAN
CONTROL

Q2002,Q2003

"This symbol means fast operating fuse."
"Ce symbole reprèsente un fusible à fusion rapide."

CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
ATTENTION : Pour une protection continue les risqes
d'Incele n'utiliser que des fusible de même type.
Risk of fire-replace fuse as marked.

Q2611

Q2610

Q2013

TO BD MAIN
CBA
(CN6001)

TO SYSTEM
CONTROL
BLOCK
DIAGRAM

AUDIO+3.3V
EV+3.3V
EV+5V
P-ON+14.5V-A
P-ON+14.5V-B
P-ON+5V
P-ON+3.3V
F1
F2
FL

P-ON+10.5V
P-ON+5V(1)
P-ON+3.3V
P-ON+1.8V
P-ON+1.2V
P-ON+5V(2)

FAN-CONT2
FAN-CONT1
FAN-LOCK
A33-PW-CONT
PWSW2
PWSW1
FL-SW

CN2000
3,4
2
5,6
9-11
17-20
23

NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.

Power Supply Block Diagram

E5K50BLP

SCHEMATIC DIAGRAMS / CBA AND TEST POINTS
Standard Notes
WARNING
Many electrical and mechanical parts in this chassis
have special characteristics. These characteristics
often pass unnoticed and the protection afforded by
them cannot necessarily be obtained by using
replacement components rated for higher voltage,
wattage, etc. Replacement parts that have these
special safety characteristics are identified in this
manual and its supplements; electrical components
having such features are identified by the mark “#” in
the schematic diagram and the parts list. Before
replacing any of these components, read the parts list
in this manual carefully. The use of substitute
replacement parts that do not have the same safety
characteristics as specified in the parts list may create
shock, fire, or other hazards.

Notes:
1. Do not use the part number shown on these
drawings for ordering. The correct part number is
shown in the parts list, and may be slightly
different or amended since these drawings were
prepared.
2. All resistance values are indicated in ohms
(K = 103, M = 106).
3. Resistor wattages are 1/4W or 1/6W unless
otherwise specified.
4. All capacitance values are indicated in µF
(P = 10-6 µF).
5. All voltages are DC voltages unless otherwise
specified.

1-9-1

BDN_SC

LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON
THE FOLLOWING PAGES:
1. CAUTION:

F
A

V

FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE
SAME TYPE FUSE.
ATTENTION: POUR UNE PROTECTION CONTINUE LES RISQES D'INCELE N'UTILISER
QUE DES FUSIBLE DE MÊME TYPE.
RISK OF FIRE-REPLACE FUSE AS MARKED.

This symbol means fast operating fuse.
Ce symbole represente un fusible a fusion rapide.

2. CAUTION:
Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown, first check to see that all components in the power supply circuit are not
defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components
in the power supply circuit to fail.

3. Note:
1. Do not use the part number shown on the drawings for ordering. The correct part number is shown in the
parts list, and may be slightly different or amended since the drawings were prepared.
2. To maintain original function and reliability of repaired units, use only original replacement parts which are
listed with their part numbers in the parts list section of the service manual.

4. Voltage indications for PLAY and STOP mode on the schematics are as shown below:
2

1
(Unit: Volt)

3
5.0
(2.5)

5.0

The same voltage for
both PLAY & STOP modes

PLAY mode
STOP mode

Indicates that the voltage
is not consistent here.

5. How to read converged lines
1-D3
3

Distinction Area
Line Number
(1 to 3 digits)

AREA D3

Examples:
1. "1-D3" means that line number "1" goes to the line number
"1" of the area "D3".
2. "1-B1" means that line number "1" goes to the line number
"1" of the area "B1".

1-B1

AREA B1

2

1-D3

1
A

B

C

D

6. Test Point Information
: Indicates a test point with a jumper wire across a hole in the PCB.
: Used to indicate a test point with a component lead on foil side.
: Used to indicate a test point with no test pin.
: Used to indicate a test point with a test pin.

1-9-2

BDN_SC

AV 1/3 Schematic Diagram
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.

F
A

V

CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
ATTENTION : Pour une protection continue les risqes
d'Incele n'utiliser que des fusible de même type.
Risk of fire-replace fuse as marked.

NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.

"This symbol means fast operating fuse."
"Ce symbole reprèsente un fusible à fusion rapide."

1-9-3

E5K50SCAV1

AV 2/3 Schematic Diagram

1-9-4

E5K50SCAV2

AV 3/3 Schematic Diagram

1-9-5

E5K50SCAV3

Front & Power SW Schematic Diagram

1-9-6

E5K50SCF

SD-A, SD-B & SD-C Schematic Diagram

1-9-7

E5K50SCSD

BD Main 1/11 Schematic Diagram
1 NOTE:
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.

1-9-8

E5K50SCBD1

BD Main 2/11 Schematic Diagram
1 NOTE:
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.

1-9-9

E5K50SCBD2

BD Main 3/11 Schematic Diagram
1 NOTE:
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.

1-9-10

E5K50SCBD3

BD Main 4/11 Schematic Diagram
1 NOTE:
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.

1-9-11

E5K50SCBD4

BD Main 5/11 Schematic Diagram
1 NOTE:
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.

1-9-12

E5K50SCBD5

BD Main 6/11 Schematic Diagram
1 NOTE:
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.

1-9-13

E5K50SCBD6

BD Main 7/11 Schematic Diagram
1 NOTE:
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.

1-9-14

E5K50SCBD7

BD Main 8/11 Schematic Diagram

1-9-15

E5K50SCBD8

BD Main 9/11 Schematic Diagram
1 NOTE:
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.

1-9-16

E5K50SCBD9

BD Main 10/11 Schematic Diagram

1-9-17

E5K50SCBD10

BD Main 11/11 Schematic Diagram
1 NOTE:
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.

1-9-18

E5K50SCBD11

AV CBA Top View
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.

F
A

V

CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
ATTENTION : Pour une protection continue les risqes
d'Incele n'utiliser que des fusible de même type.
Risk of fire-replace fuse as marked.
"This symbol means fast operating fuse."
"Ce symbole reprèsente un fusible à fusion rapide."

1-9-19

Because a hot chassis ground is present in the power
supply circut, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly, when troubleshooting this type power supply
circuit, a variable isolation transformer is required.

NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.

BE5K20F01012A

AV CBA Bottom View
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.

F
A

V

CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
ATTENTION : Pour une protection continue les risqes
d'Incele n'utiliser que des fusible de même type.
Risk of fire-replace fuse as marked.
"This symbol means fast operating fuse."
"Ce symbole reprèsente un fusible à fusion rapide."

NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.

Because a hot chassis ground is present in the power
supply circut, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly, when troubleshooting this type power supply
circuit, a variable isolation transformer is required.

1-9-20

BE5K20F01012A

Front CBA Top View

Power SW CBA Top View

Front CBA Bottom View

Power SW CBA Bottom View

BE5K50F01031A

1-9-21

BE5K50F01031B

SD-A CBA Top View

SD-B CBA Top View

SD-C CBA Top View

SD-A CBA Bottom View

SD-B CBA Bottom View

SD-C CBA Bottom View

BE5K10F01021A

BE5K10F01051

1-9-22

BE5K10F01021C

EXPLODED VIEWS
Cabinet
A3
2L082

2L082

See Electrical Parts List
for parts with this mark.
Some Ref. Numbers are
not in sequence.

BD Main CBA &
BD Mechanism Assembly

2L082
2L049

2L085

2L034

B32

2L081 2L084
2L083

A4

AC1001

2L084
2L081
2L070
2L071

FM1001

1B1

B5
F1001

AV CBA
2L055
2L086

B47

2L026

B4

A6

B15

B69

2L038

A6
Power SW CBA
2L024

B68

SD-A CBA
SD-B CBA

2L024

A2

2L051

A6

2L051
A22

B13
A6

B70
A1X

2L024

SD-C CBA

Front CBA

1-10-1

E5K50CEX

Packing
Lower Side
X6

Upper Side

X14

X40

X2-A

X2-B

X1-A

X1-B

Some Ref. Numbers
are not in sequence.

S1

X19
X10

S3

A21
S1

S2

A21

1-10-2

E5K50PEX

MECHANICAL PARTS LIST
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTE: Parts that are not assigned part numbers
(---------) are not available.

Ref. No.

Description

Part No.

A1X

FRONT ASSEMBLY E5K50UD

1VM123179

A2

CHASSIS E5K50UD

1VM330278

A3

TOP COVER E5K20UD

1VM122080

A4

REAR PANEL E5K50UD

1VM227696

A6

FOOT ASSEMBLY E5H50UD

1VM430199A

A21

BAR CODE LABEL E5K50UD

----------

A22

LICENSE LABEL E5K12UD

----------

2L024

SCREW P-TIGHT M3X8 BIND HEAD+

GBJP3080

2L026

SCREW C-TIGHT M3X6 E5610UD

0VM412937A

2L034

SCREW C-TIGHT M3X6 E5610UD

0VM412937A

2L038

SCREW C-TIGHT M3X6 E5610UD

0VM412937A

2L049

SCREW C-TIGHT M3X6 E5610UD

0VM412937A

2L051

SCREW C-TIGHT M3X6 E5610UD

0VM412937A

2L070

B-TIGHT SCREW M3X8 E5E00UD

1VM428563

2L071

B-TIGHT SCREW M3X8 E5E00UD

1VM428563

2L081

S-TIGHT SCREW M3X6 E5E00UD

1VM428564

2L082

SCREW TAP TIGHT M3X5 BIND HEAD+BLK NI GBHC3050

2L083

S-TIGHT SCREW M3X6 E5E00UD

1VM428564

2L084

S-TIGHT SCREW M3X6 E5E00UD

1VM428564

2L085

SCREW S-TIGHT M3X10 E5610UD

0VM412936A

2L086

SCREW S-TIGHT M3X5 E5K10UD

1VM431079

B4

POWER HOLDER E5K20UD

1VM225697

B5

FAN HOLDER E6700UD

1VM320504L

B13

SD PCB BRACKET E5K10UD

1VM329203

B15

SHIELD BRACKET E5K10UD

1VM226756

B32

MAIN PCB EARTH PLATE E5K20UD

1VM430800

B68

FRONT SHIELD E5K20UD

1VM328838

B69

PORON SPONGE E5K20UD

1VM431100

FM1001

MOTOR DC FAN 2D57NL100010

MMEZR12XNR05

PACKING
S1

SIDE PAD E5K50UD

S2

GIFT BOX CARTON E5K50UD

1VM123159
1VM330520

S3

SET BAG E7708UA

0DM400731D

X1-A#

OWNERS MANUAL(EN) E5K50UD

1VMN27515

X1-B#

OWNERS MANUAL(ES/FR) E5K50UD

1VMN27615

X2-A

QUICK GUIDE(EN) E5K50UD

1VMN27593

X2-B

QUICK GUIDE(ES/FR) E5K50UD

1VMN27616

X6

MANGANESE DRY BATTERY R6UWC/2STA

XB0M311MS003

X10

ACCESSORY BAG E5795ED

0VM416059

X14

AV CORD 1000/BLACK

WPZ0102TM018

X19

REMOTE CONTROL UNIT NB821UD

NB821UD

X40

WARRANTY CARD E5H50UD

1VMN26325

ACCESSORIES

20090604

1-11-1

E5K50CA

ELECTRICAL PARTS LIST
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.

Ref. No.

NOTES:
1. Parts that are not assigned part numbers (---------)
are not available.
2. Tolerance of Capacitors and Resistors are noted
with the following symbols.
C.....±0.25%

D.....±0.5%

F.....±1%

Description

Part No.

C2007

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2009

CHIP CERAMIC CAP.(1608) CH J 100pF/50V

CHD1JJ3CH101

C2011

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2013

CHIP CERAMIC CAP.(1608) B K 0.015µF/50V

CHD1JK30B153

C2016

ELECTROLYTIC CAP. 47µF/6.3V/M

CEA47RENW016

C2065

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

C2100

CHIP CERAMIC CAP.(1608) B K 0.1µF/25V

CHD1EK30B104

C2104

ELECTROLYTIC CAP. 47µF/6.3V/M

CEA47RENW016

C2106

CHIP CERAMIC CAP. CH D 8pF/50V

CHD1JD3CH8R0

C2108

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2180

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2181

ELECTROLYTIC CAP. 220µF/6.3V/M

CEA221ENW016

C2204

ELECTROLYTIC CAP. 47µF/25V/M

CED47RENW016

C2205

ELECTROLYTIC CAP. 470µF/6.3V/M

CEA471ENW016

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104
CEC10RENW016

G.....±2%

J......±5%

K.....±10%

C2206
C2207

ELECTROLYTIC CAP. 10µF/16V/M

M.....±20%

N.....±30%

Z.....+80/-20%

C2208

ELECTROLYTIC CAP. 10µF/16V/M

CEC10RENW016

C2209

CHIP CERAMIC CAP. CH J 220pF/50V

CHD1JJ3CH221

C2210

CHIP CERAMIC CAP. CH J 220pF/50V

CHD1JJ3CH221

C2211

ELECTROLYTIC CAP. 10µF/16V/M

CEC10RENW016

C2212

ELECTROLYTIC CAP. 10µF/16V/M

CEC10RENW016

C2213

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2215

CHIP CERAMIC CAP. CH J 39pF/50V

CHD1JJ3CH390

C2216

CHIP CERAMIC CAP. CH J 39pF/50V

CHD1JJ3CH390

C2280

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2281

ELECTROLYTIC CAP. 220µF/6.3V/M

CEA221ENW016

C2283

ELECTROLYTIC CAP. 1000µF/6.3V/M

CEA102ENW016

C2284

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2286

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2300

ELECTROLYTIC CAP. 100µF/6.3V/M

CEA101ENW016

C2301

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2314

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2315

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2316

ELECTROLYTIC CAP. 22µF/6.3V/M

CEA22RENW016

C2319

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

C2320

CHIP CERAMIC CAP.(1608) B K 1µF/10V

CHD1AK30B105

C2321

CHIP CERAMIC CAP.(1608) B K 1µF/10V

CHD1AK30B105

BD MAIN CBA & BD MECHANISM
ASSEMBLY
Ref. No.
1B1

Description

Part No.

BD MAIN CBA & BD MECHANISM ASSEMBLY N77R0BUN

AV CBA
Ref. No.

Description
AV CBA
Consists of the following:

Part No.
1VSA22027

CAPACITORS
C1001

CAP CERAMIC 470pF/2KV/K

CA3D471PAN17

C1002#

LINE ACROSS CAP. 0.047µF/250V K

CT2E473DC016

C1004

CHIP CERAMIC CAP.(1608) CH J 22pF/50V

CHD1JJ3CH220

C1005

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

C1006

CHIP CERAMIC CAP.(1608) B K 0.033µF/50V

CHD1JK30B333

C1007#

SAFETY CAP. 3300pF/250V

CCD2EMA0E332

C1008

ELECTROLYTIC CAPACITOR
ZR200TA221K18EB

CA2D221DYG04

C1009

ELECTROLYTIC CAP. 47µF/35V/M

CEE47RENW016

C2322

ELECTROLYTIC CAP. 33µF/10V/M

CEB33RENW016

C1010

METALIZED FILM CAP. 0.0022µF/400V K

CT2H222DT034

C2323

ELECTROLYTIC CAP. 330µF/6.3V/M

CEA331ENW016

C1013

CHIP CERAMIC CAP.(1608) B K 0.01µF/50V

CHD1JK30B103

C2324

ELECTROLYTIC CAP. 330µF/6.3V/M

CEA331ENW016

C1014

POLYESTER FILM CAP. (PB FREE) 0.0068µF/
100V J

CA2A682DT018

C2325

ELECTROLYTIC CAP. 33µF/10V/M

CEB33RENW016

C2326

ELECTROLYTIC CAP. 330µF/6.3V/M

CEA331ENW016

C1015

CERAMIC CAP. B K 470pF/500V

CCD2JKS0B471

C2327

ELECTROLYTIC CAP. 330µF/6.3V/M

CEA331ENW016

C1016

ELECTROLYTIC CAP. 220µF/10V M

CEB221ENW016

C2328

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

C1017#

LINE ACROSS CAP. 0.047µF/250V K

CT2E473DC016

C2329

ELECTROLYTIC CAP. 100µF/6.3V/M

CEA101ENW016

C1018

ELECTROLYTIC CAP 2200µF/25V/M

CED222ENW009

C2330

ELECTROLYTIC CAP. 100µF/6.3V/M

CEA101ENW016

C1019

ELECTROLYTIC CAP 4700µF/6.3V/M

CEA472ENW009

C2601

ELECTROLYTIC CAP. 1000µF/6.3V/M

CEA102ENW016

C1021

ELECTROLYTIC CAP. 22µF/50V/M

CEF22RENW016

C2602

ELECTROLYTIC CAP. 1000µF/6.3V/M

CEA102ENW016

C1022

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2604

ELECTROLYTIC CAP. 10µF/16V/M

CEC10RENW016
CED47RENW016

C1023

ELECTROLYTIC CAP. 220µF/25V/M

CED221ENW016

C1024

ELECTROLYTIC CAP 2200µF/25V/M

CED222ENW009

C1025

ELECTROLYTIC CAP 4700µF/6.3V/M

CEA472ENW009

C1032

ELECTROLYTIC CAP. 100µF/6.3V/M

CEA101ENW016

C1033

CHIP CERAMIC CAP.(1608) B K 0.01µF/50V

CHD1JK30B103

C1037

ELECTROLYTIC CAP. 47µF/6.3V/M

CEA47RENW016

C1140

ELECTROLYTIC CAP. 22µF/50V/M

CEF22RENW016

C2000

CHIP CERAMIC CAP.(1608) B K 0.1µF/25V

CHD1EK30B104

C2001

ELECTROLYTIC CAP. 100µF/16V/M

CEC101ENW016

C2002

CHIP CERAMIC CAP.(1608) B K 0.1µF/25V

CHD1EK30B104

C2005

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

20090604

C2605

ELECTROLYTIC CAP. 47µF/25V/M

C2606

ELECTROLYTIC CAP. 100µF/6.3V/M

CEA101ENW016

C2607

ELECTROLYTIC CAP. 1000µF/6.3V/M

CEA102ENW016

C2609

CHIP CERAMIC CAP.(1608) B K 1µF/10V

CHD1AK30B105

C2610

CHIP CERAMIC CAP.(1608) B K 0.1µF/25V

CHD1EK30B104

C2613

ELECTROLYTIC CAP. 220µF/6.3V/M

CEA221ENW016

C2614

CHIP CERAMIC CAP.(1608) B K 0.33µF/10V

CHD1AK30B334

C2616

CHIP CERAMIC CAP.(1608) B K 1µF/10V

CHD1AK30B105

C2618

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2619

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C2620

CHIP CERAMIC CAP. B K 8200pF/50V

CHD1JK30B822

1-12-1

E5K50EL

Ref. No.

Description

C2622

CHIP CERAMIC CAP.(2125) B K 10µF/6.3V

C2623
C2627

Part No.

Ref. No.

Description

Part No.

CHE0KK30B106

D2615

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

CHIP CERAMIC CAP.(2125) B K 10µF/6.3V

CHE0KK30B106

D2620

SCHOTTKY BARRIER DIODE SMD SK34

ND1Z0000SK34

CHIP CERAMIC CAP.(1608) B K 1µF/10V

CHD1AK30B105

D2621

SCHOTTKY BARRIER DIODE SMD SK34

ND1Z0000SK34

C2629

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

D2624

DIODE ZENER 4V7BSB-T26

NDTB4R7BST26

C2630

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

ICS

C2631

CHIP CERAMIC CAP.(1608) B K 5600pF/50V

CHD1JK30B562

IC1001

IC SWITCHING FA5542N-A2-TE1 SOP8

QSZBA0TFD005

C2632

CHIP CERAMIC CAP.(2125) B K 10µF/6.3V

CHE0KK30B106

IC1003#

PHOTOCOUPLER PS2561A-1(W)

QPEWPS2561A1

C2633

CHIP CERAMIC CAP.(2125) B K 10µF/6.3V

CHE0KK30B106

IC1011

IC SHUNT REGULATOR SL431A-AT

NSZBA0TAUK01

C2634

CHIP CERAMIC CAP.(2125) B K 10µF/6.3V

CHE0KK30B106

IC1012

IC SHUNT REGULATOR SL431A-AT

NSZBA0TAUK01

C2638

CHIP CERAMIC CAP. CH J 330pF/50V

CHD1JJ3CH331

IC2000

IC SUB MICON MN101C77A GC

QSAA0R0MS010

C2639

CHIP CERAMIC CAP. CH J 220pF/50V

CHD1JJ3CH221

IC2001

RESET IC S-80930CNMC-G80T2G

QSCA0T0SK018

C2640

CHIP CERAMIC CAP.(1608) B K 0.01µF/50V

CHD1JK30B103

IC2200

IC OP AMP UTC4580TE

NSCA0T02H001

C2652

ELECTROLYTIC CAP. 330µF/6.3V/M

CEA331ENW016

IC2300

IC VIDEO DRIVER MM1757EHBE

QSCA0T0MM001

C2653

ELECTROLYTIC CAP. 330µF/6.3V/M

CEA331ENW016

IC2600

QSZBA0RSH083

CEC471ENW016

IC VOLTAGE REGULATOR PQ070XFC1SZF /
4PIN

C2655

ELECTROLYTIC CAP. 470µF/16V/M

C2800

CHIP CERAMIC CAP.(1608) B K 0.01µF/50V

CHD1JK30B103

IC2601

IC DC-DC CONVERTER BD9323EFJ-E2

QSCA0T0RM002

C2801

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

IC2602

IC DC-DC CONVERTER BD9323EFJ-E2

QSCA0T0RM002

COILS

CONNECTORS
CN2000

TWG CONNECTOR 23P TWG-P23P-A1

J3TWA23TG001

L1001#

LINE FILTER 27MH 5703

LLBG00ZKT009

L1003

POWER INDUCTORS CWKBNP-220K

LLF2200KV002

L1004

RADIAL TYPE CHOKE COIL CW68-470K841040NP

LLBD00PKV023

CN2001

WIRE ASSEMBLY AV-MAIN 26P WX1E5K20001

WX1E5K20-001

CN2002

FFC CONNECTOR IMSA-9615S-16A-PP-A

JC96J16ER007

CN2004

PH CONNECTOR TOP 2P B2B-PH-K-S
(LF)(SN)

J3PHC02JG029

DIODES

L1005

CHOKE COIL 22µH-K

LLBD00PKV021

L2100

INDUCTOR(0.47µH K) LAP02TAR47K

LLAXKATTUR47
LLF1000KV002

L2201

POWER INDUCTORS CWKBNP-100K

D1001

DIODE 1N5397-B

NDLZ001N5397

L2202

POWER INDUCTORS CWKBNP-100K

LLF1000KV002

D1002

DIODE 1N5397-B

NDLZ001N5397

L2300

LLBD00PKV023

D1003

DIODE 1N5397-B

NDLZ001N5397

RADIAL TYPE CHOKE COIL CW68-470K841040NP

D1004

DIODE 1N5397-B

NDLZ001N5397

L2301

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

L2306

PCB JUMPER D0.6-P5.0

JW5.0T

L2400

CHOKE COIL 22µH-K

LLBD00PKV021

L2600

CHOKE COIL 22µH-K

LLBD00PKV021

L2601

CHOKE COIL 22µH-K

LLBD00PKV021

D1006

DIODE FR154

NDLZ000FR154

D1007

RECTIFIER DIODE BA157

NDQZ000BA157

D1008
D1010

RECTIFIER DIODE BA157
RECTIFIER DIODE BA157

NDQZ000BA157
NDQZ000BA157

TRANSISTORS

D1012

PCB JUMPER D0.6-P15.0

JW15.0T

D1013

SCHOTTKY BARRIER DIODE SMD SK54

ND1Z0000SK54

Q1003#

FET MOS 2SK3563(Q M)

D1014

SCHOTTKY BARRIER DIODE SMD SK54

ND1Z0000SK54

Q1011

NPN TRANSISTOR 2SC5344 Y

NQSY02SC5344

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

QFQZSK3563QM

D1017

DIODE ZENER 5V1BSB-T26

NDTB5R1BST26

Q1111

D1018

RECTIFIER DIODE BA157

NDQZ000BA157

Q2000

PNP TRANSISTOR 2SA1980M Y

NQSY2SA1980M

D1019

DIODE ZENER 18BSB-T26

NDTB018BST26

Q2001

NPN TRANSISTOR RES-IN SRC1203MAT

NQSZSRC1203M

D1020

DIODE ZENER 18BSB-T26

NDTB018BST26

Q2002

PNP TRANSISTOR 2SA1980M Y

NQSY2SA1980M

NPN TRANSISTOR RES-IN SRC1203MAT

NQSZSRC1203M
NQSY2SA1980M

D1021

DIODE ZENER 6V8BSB-T26

NDTB6R8BST26

Q2003

D1022

SCHOTTKY BARRIER DIODE SB140

NDQZ000SB140

Q2012

PNP TRANSISTOR 2SA1980M Y

D1023

SCHOTTKY BARRIER DIODE SMD SK39

ND1Z0000SK39

Q2013

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

D1024

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2014

PNP TRANSISTOR 2SA1981Y-AT

NQSY02SA1981

D1036

DIODE ZENER 27BSB-T26

NDTB027BST26

Q2100

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

D1037

DIODE ZENER 27BSB-T26

NDTB027BST26

Q2101

D1137

RECTIFIER DIODE BA157

NDQZ000BA157

Q2200

PNP TRANSISTOR RES-IN SRA2205M

NQSZSRA2205M

D1138

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2201

PNP TRANSISTOR RES-IN SRA2205M

NQSZSRA2205M

NDTZ01N4148F

Q2202

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

PNP TRANSISTOR 2SA1980M Y

NQSY2SA1980M

D2001

DIODE SWITCHING 1N4148-F0021

D2002

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2203

D2003

DIODE ZENER 36BSA-T26

NDTA036BST26

Q2204

D2004

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2205

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

NPN TRANSISTOR RES-IN SRC1203MAT

NQSZSRC1203M

D2600

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2600

D2601

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2601

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

D2602

DIODE 1N5406

NDLZ001N5406

Q2602

PNP TRANSISTOR 2SA1980M Y

NQSY2SA1980M

D2605

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2603

PNP TRANSISTOR 2SA1981Y-AT

NQSY02SA1981

PNP TRANSISTOR STB1277LY-AT

NQSYSTB1277L

D2606

DIODE ZENER 11BSC-T26

NDTC011BST26

Q2604

D2608

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2605

NPN TRANSISTOR 2SC5344 Y

NQSY02SC5344

D2609

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2606

PNP TRANSISTOR STB1277LY-AT

NQSYSTB1277L

D2610

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2607

TRANSISTOR(PB FREE) KTC2026-Y/P

NQEYKTC2026P

NDTZ01N4148F

Q2608

PNP TRANSISTOR 2SA1980MG-AT

NQSG2SA1980M

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

D2612

DIODE SWITCHING 1N4148-F0021

D2613

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2609

D2614

DIODE SWITCHING 1N4148-F0021

NDTZ01N4148F

Q2610

20090604

1-12-2

E5K50EL

Ref. No.

Description

Part No.

Ref. No.

Description

Part No.

Q2611

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

R2050

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

Q2612

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

R2051

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

Q2613

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

R2053

CHIP RES. 1/10W J 47k Ω

RRXAJR5Z0473

Q2614

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

R2056

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

Q2618

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

R2058

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

Q2619

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

R2060

CHIP RES. 1/10W J 47k Ω

RRXAJR5Z0473

Q2620

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

R2061

CHIP RES. 1/10W J 5.6k Ω

RRXAJR5Z0562

Q2621

NPN TRANSISTOR 2SC5343MG-AT

NQSG2SC5343M

R2063

CARBON RES. 1/4W J 620 Ω

RCX4JATZ0621

R2064

CARBON RES. 1/4W J 620 Ω

RCX4JATZ0621

RESISTORS
R1004

CARBON RES. 1/4W J 75k Ω

RCX4JATZ0753

R2065

CARBON RES. 1/4W J 10 Ω

RCX4JATZ0100

R1005

CARBON RES. 1/4W J 33 Ω

RCX4JATZ0330

R2066

CHIP RES. 1/10W J 47k Ω

RRXAJR5Z0473

R1006

CARBON RES. 1/4W J 100k Ω

RCX4JATZ0104

R2067

CHIP RES. 1/10W J 5.6k Ω

RRXAJR5Z0562

R1008

CARBON RES. 1/4W J 56 Ω

RCX4JATZ0560

R2069

CARBON RES. 1/4W J 120 Ω

RCX4JATZ0121

R1009

CARBON RES. 1/4W J 100 Ω

RCX4JATZ0101

R2070

CARBON RES. 1/4W J 120 Ω

RCX4JATZ0121

R1011

CARBON RES. 1/4W J 10 Ω

RCX4JATZ0100

R2073

CARBON RES. 1/4W J 620 Ω

RCX4JATZ0621

R1012

CARBON RES. 1/4W J 4.7k Ω

RCX4JATZ0472

R2074

CARBON RES. 1/4W J 620 Ω

RCX4JATZ0621

R1013

METAL OXIDE FILM RES. 2W J 47k Ω

RN02473ZU001

R2091

CARBON RES. 1/4W J 47k Ω

RCX4JATZ0473

R1014

METAL OXIDE FILM RES. 2W J 0.68 Ω

RN02R68ZU001

R2092

CARBON RES. 1/4W J 47k Ω

RCX4JATZ0473

R1015

CHIP RES. 1/10W J 1 Ω

RRXAJR5Z01R0

R2093

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R1016

CHIP RES. 1/10W J 470 Ω

RRXAJR5Z0471

R2094

CHIP RES. 1/10W J 47k Ω

RRXAJR5Z0473

R1017

CHIP RES. 1/10W J 22k Ω

RRXAJR5Z0223

R2095

CHIP RES. 1/10W J 3.9k Ω

RRXAJR5Z0392

R1018

CHIP RES. 1/10W J 1 Ω

RRXAJR5Z01R0

R2100

CHIP RES. 1/10W J 2k Ω

RRXAJR5Z0202

R1019

CHIP RES. 1/10W J 680 Ω

RRXAJR5Z0681

R2101

CHIP RES. 1/10W J 2.2k Ω

RRXAJR5Z0222

R1020

CHIP RES. 1/10W F 2k Ω

RRXAFR5H2001

R2102

CHIP RES. 1/10W J 2.2k Ω

RRXAJR5Z0222

R1021

CARBON RES. 1/4W J 10k Ω

RCX4JATZ0103

R2103

CHIP RES. 1/10W J 220 Ω

RRXAJR5Z0221

R1022

CARBON RES. 1/4W J 10k Ω

RCX4JATZ0103

R2104

CHIP RES. 1/10W J 75 Ω

RRXAJR5Z0750

R1023

CARBON RES. 1/4W J 5.1k Ω

RCX4JATZ0512

R2105

CHIP RES. 1/10W J 100k Ω

RRXAJR5Z0104

R1024

CHIP RES. 1/10W F 270 Ω

RRXAFR5H2700

R2109

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

R1025

CHIP RES. 1/10W F 1.0k Ω

RRXAFR5H1001

R2115

CARBON RES. 1/4W J 5.6 Ω

RCX4JATZ05R6

R1026

CHIP RES. 1/10W F 1.0k Ω

RRXAFR5H1001

R2116

CARBON RES. 1/4W J 5.6 Ω

RCX4JATZ05R6

R1027

CARBON RES. 1/4W J 10k Ω

RCX4JATZ0103

R2117

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R1039

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R2118

CARBON RES. 1/4W J 10 Ω

RCX4JATZ0100

R1040

CARBON RES. 1/4W J 100 Ω

RCX4JATZ0101

R2208

CHIP RES. 1/10W F 24k Ω

RRXAFR5H2402

R1041

PCB JUMPER D0.6-P5.0

JW5.0T

R2209

CHIP RES. 1/10W F 24k Ω

RRXAFR5H2402

R1046

CHIP RES. 1/10W F 1.5k Ω

RRXAFR5H1501

R2210

CHIP RES. 1/10W J 8.2k Ω

RRXAJR5Z0822

R1047

CHIP RES. 1/10W F 100 Ω

RRXAFR5H1000

R2211

CHIP RES. 1/10W J 8.2k Ω

RRXAJR5Z0822

R1048

CHIP RES. 1/10W F 4.7k Ω

RRXAFR5H4701

R2212

CHIP RES. 1/10W F 33.0k Ω

RRXAFR5H3302

R1142

CHIP RES. 1/10W J 1 Ω

RRXAJR5Z01R0

R2213

CHIP RES. 1/10W F 33.0k Ω

RRXAFR5H3302

R1143

CHIP RES. 1/10W F 18k Ω

RRXAFR5H1802

R2214

CHIP RES. 1/10W J 100k Ω

RRXAJR5Z0104

R1144

CHIP RES. 1/10W F 10k Ω

RRXAFR5H1002

R2215

CHIP RES. 1/10W J 100k Ω

RRXAJR5Z0104

R1145

CHIP RES. 1/10W J 330k Ω

RRXAJR5Z0334

R2216

CHIP RES. 1/10W J 820 Ω

RRXAJR5Z0821

R2000

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R2217

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R2001

CHIP RES. 1/10W J 100 Ω

RRXAJR5Z0101

R2218

CHIP RES. 1/10W J 820 Ω

RRXAJR5Z0821

R2002

CHIP RES. 1/10W J 100 Ω

RRXAJR5Z0101

R2219

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R2004

CHIP RES. 1/10W J 470 Ω

RRXAJR5Z0471

R2220

CHIP RES. 1/10W J 100k Ω

RRXAJR5Z0104

R2005

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

R2221

CHIP RES. 1/10W J 100k Ω

RRXAJR5Z0104

R2006

CHIP RES. 1/10W J 100 Ω

RRXAJR5Z0101

R2223

CHIP RES. 1/10W J 4.7k Ω

RRXAJR5Z0472

R2007

CHIP RES. 1/10W J 100 Ω

RRXAJR5Z0101

R2224

CHIP RES. 1/10W J 2.2k Ω

RRXAJR5Z0222

R2008

CHIP RES. 1/10W J 47k Ω

RRXAJR5Z0473

R2226

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R2018

CHIP RES. 1/10W J 39k Ω

RRXAJR5Z0393

R2227

CHIP RES. 1/10W J 220 Ω

RRXAJR5Z0221

R2019

CHIP RES. 1/10W J 22k Ω

RRXAJR5Z0223

R2228

CHIP RES. 1/10W J 220 Ω

RRXAJR5Z0221

R2020

CHIP RES. 1/10W J 100 Ω

RRXAJR5Z0101

R2229

CHIP RES. 1/10W J 2.2k Ω

RRXAJR5Z0222

R2024

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2230

CHIP RES. 1/10W J 4.7k Ω

RRXAJR5Z0472

R2025

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2284

CHIP RES. 1/10W J 10 Ω

RRXAJR5Z0100

R2028

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2285

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2029

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2286

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2031

CHIP RES. 1/10W J 100 Ω

RRXAJR5Z0101

R2287

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2032

CHIP RES. 1/10W J 100 Ω

RRXAJR5Z0101

R2288

CHIP RES. 1/10W J 1.8k Ω

RRXAJR5Z0182

R2033

CHIP RES. 1/10W J 100 Ω

RRXAJR5Z0101

R2301

CHIP RES.(1608) 1/10W F 82.0 Ω

RRXAFR5H82R0

R2034

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

R2302

CHIP RES.(1608) 1/10W F 82.0 Ω

RRXAFR5H82R0

R2035

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2303

CHIP RES.(1608) 1/10W F 82.0 Ω

RRXAFR5H82R0

R2039

CHIP RES. 1/10W J 680 Ω

RRXAJR5Z0681

R2304

CHIP RES.(1608) 1/10W F 82.0 Ω

RRXAFR5H82R0

R2305

CHIP RES.(1608) 1/10W F 82.0 Ω

RRXAFR5H82R0

20090604

1-12-3

E5K50EL

Ref. No.

Description

Part No.

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

R2309

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2310

CHIP RES. 1/10W J 75 Ω

RRXAJR5Z0750

R2307

R2311

CHIP RES. 1/10W J 75 Ω

RRXAJR5Z0750

R2312

CHIP RES. 1/10W J 75 Ω

RRXAJR5Z0750

R2313

CHIP RES. 1/10W J 75 Ω

RRXAJR5Z0750

R2315

CHIP RES. 1/10W J 27k Ω

RRXAJR5Z0273

R2325

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

R2341

CHIP RES. 1/10W F 4.7k Ω

RRXAFR5H4701

R2342

CHIP RES. 1/10W F 2.7k Ω

RRXAFR5H2701

R2343

CHIP RES. 1/10W F 1.5k Ω

RRXAFR5H1501

R2344

CHIP RES. 1/10W F 1.2k Ω

RRXAFR5H1201

R2345

CHIP RES. 1/10W F 1.2k Ω

RRXAFR5H1201

R2600

CHIP RES. 1/10W J 4.7k Ω

RRXAJR5Z0472

R2601

CHIP RES. 1/10W J 4.7k Ω

RRXAJR5Z0472

R2602

CHIP RES. 1/10W J 2.2k Ω

RRXAJR5Z0222

R2603

CHIP RES. 1/10W J 4.7k Ω

RRXAJR5Z0472

R2604
R2606

CARBON RES. 1/4W J 4.7k Ω
CHIP RES. 1/10W J 47k Ω

RCX4JATZ0472
RRXAJR5Z0473

R2607

CHIP RES. 1/10W J 4.7k Ω

RRXAJR5Z0472

R2608

CHIP RES. 1/10W J 4.7k Ω

RRXAJR5Z0472

R2609

CHIP RES. 1/10W J 4.7k Ω

RRXAJR5Z0472

R2610

CARBON RES. 1/4W J 220 Ω

RCX4JATZ0221

R2612

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2613

CHIP RES. 1/10W F 10k Ω

RRXAFR5H1002

R2616
R2617

CHIP RES. 1/10W F 15k Ω
CHIP RES. 1/10W F 2k Ω

RRXAFR5H1502
RRXAFR5H2001

R2620

CHIP RES. 1/10W J 4.7k Ω

RRXAJR5Z0472

R2621

CARBON RES. 1/4W J 82 Ω

RCX4JATZ0820

R2622

CARBON RES. 1/4W J 82 Ω

RCX4JATZ0820

R2636

CARBON RES. 1/4W J 33 Ω

RCX4JATZ0330

R2637

METAL OXIDE FILM RES. 1W J 1.2 Ω

RN011R2ZU001

R2638

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2639

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2650

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R2651

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2652

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R2653

CHIP RES. 1/10W J 10k Ω

RRXAJR5Z0103

R2654

CHIP RES. 1/10W J 5.1k Ω

RRXAJR5Z0512

R2655

CHIP RES. 1/10W J 8.2k Ω

RRXAJR5Z0822

R2656

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R2657

CHIP RES. 1/10W J 2.7k Ω

RRXAJR5Z0272

R2658

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R2659

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

R2660

CHIP RES. 1/10W F 1.5k Ω

RRXAFR5H1501

R2661

CHIP RES. 1/10W F 3.3k Ω

RRXAFR5H3301

R2662

CHIP RES. 1/10W F 1.5k Ω

RRXAFR5H1501

R2663

CHIP RES. 1/10W F 2.2k Ω

RRXAFR5H2201

R2664

CHIP RES. 1/10W F 3.3k Ω

RRXAFR5H3301

R2665

CHIP RES. 1/10W J 100 Ω

RRXAJR5Z0101

R2667

CHIP RES. 1/10W J 330 Ω

RRXAJR5Z0331

R2669

CHIP RES. 1/10W J 27k Ω

RRXAJR5Z0273

R2671

CHIP RES. 1/10W J 220k Ω

RRXAJR5Z0224

R2673

CHIP RES. 1/10W J 2.2M Ω

RRXAJR5Z0225

R2674

CHIP RES. 1/10W J 100k Ω

RRXAJR5Z0104

R2675

CHIP RES. 1/10W J 220 Ω

RRXAJR5Z0221

R2676

CHIP RES. 1/10W J 100k Ω

RRXAJR5Z0104

R2678

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

R2679

CHIP RES. 1/10W J 47k Ω

RRXAJR5Z0473

R2680

CHIP RES. 1/10W J 27k Ω

RRXAJR5Z0273

Ref. No.

SCREW S-TIGHT M3X8 BIND HEAD+

20090604

Part No.

B47

HEAT SINK E2A00JD

F1001#

FUSE TIME RAG FSL 250V 2A(EM)

PDGJAB0NG202

FH1001

FUSE HOLDER MSF-015 LF (B110)

XH01Z00LY002

1VM424636E

FH1002

FUSE HOLDER MSF-015 LF (B110)

XH01Z00LY002

JK2100

RCA JACK(BLACK) MSP-251V-01 NI FE LF

JXRL010LY125

JK2200

PIN JACK 3P MSD-243V-48 NI FE LF

JXRL030LY167

JK2300

RCA JACK 3PIN MSD-243V-18 NI FE LF

JXRL030LY132

JK2400

FIBER OPTIC TRANS.MODULE 0C-0805T*002 JWHHA00JD002

JP2201

PCB JUMPER D0.6-P7.0

JW7.0T

JP2204

PCB JUMPER D0.6-P25.0

JW25.0T

JP2208

PCB JUMPER D0.6-P8.5

JW8.5T

JP2209

PCB JUMPER D0.6-P24.0

JW24.0T

JP2210

PCB JUMPER D0.6-P28.0

JW28.0T

JP2211

PCB JUMPER D0.6-P13.0

JW13.0T

JP2213

PCB JUMPER D0.6-P13.0

JW13.0T

JP2215

PCB JUMPER D0.6-P8.0

JW8.0T

JP2216

PCB JUMPER D0.6-P5.0

JW5.0T

JP2217

PCB JUMPER D0.6-P5.0

JW5.0T

JP2219

PCB JUMPER D0.6-P15.0

JW15.0T

JP2222

PCB JUMPER D0.6-P27.5

JW27.5T

JP2225

PCB JUMPER D0.6-P25.0

JW25.0T

JP2226

PCB JUMPER D0.6-P13.0

JW13.0T

JP2227

PCB JUMPER D0.6-P10.5

JW10.5T

JP2228

PCB JUMPER D0.6-P17.0

JW17.0T

JP2229

PCB JUMPER D0.6-P5.0

JW5.0T

SA1001# VARISTOR 10D 471K SVR

NVQZVR10D471

T1001#

TRANS POWER 8733

LTT2PC0KT050

X2000

CERAMIC RESONATOR ZTT8.00MT47

FY0805PLN004

FRONT ASSEMBLY
Ref. No.

Description

Part No.

FRONT ASSEMBLY
Consists of the following:

1VSA22025

FRONT CBA
POWER SW CBA

-------------------

FRONT CBA
Ref. No.

Description
FRONT CBA
Consists of the following:

Part No.
----------

CAPACITORS
C3000

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C3001

ELECTROLYTIC CAP. 22µF/50V/M/H7

CEF22RENW025

C3002

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C3003

ELECTROLYTIC CAP. 100µF/6.3V/M/H7

CEA101ENW025

C3005

CHIP CERAMIC CAP.(1608) B K 1000pF/50V

CHD1JK30B102

C3006

CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V

CHD1JZ30F104

C3007

ELECTROLYTIC CAP. 100µF/6.3V/M/H7

CEA101ENW025

C3008

CHIP CERAMIC CAP.(1608) B K 0.1µF/50V

CHD1JK30B104

CN3000

WIRE ASSEMBLY FRONT-AV 16P WX1E5K10- WX1E5K10-002
002

CN3001

CONNECTOR PRINT OSU S3B-PH-KS(LF)(SN)

L3001

CHIP INDUCTOR LB 2016T101K

CONNECTORS

J3PHC03JG030

COIL
LLC101KTU007

TRANSISTOR
Q3000

MISCELLANEOUS
2L055

Description

AC1001# AC CORD W/O A GND WIRE UL/CSA/1700/NO/ WAC1720LW001
BLACK

NPN TRANSISTOR SMD 2SC5343SFG

NQ1G2SC5343S

RESISTORS
GBJS3080

R3000

1-12-4

CHIP RES. 1/10W J 10 Ω

RRXAJR5Z0100

E5K50EL

Ref. No.

Description

Part No.

SD-B CBA

R3001

CHIP RES. 1/10W J 10 Ω

RRXAJR5Z0100

R3002

CHIP RES. 1/10W J 12k Ω

RRXAJR5Z0123

R3003

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

R3004

CHIP RES. 1/10W J 1k Ω

RRXAJR5Z0102

R3005

CHIP RES. 1/10W J 150 Ω

RRXAJR5Z0151

CN4101

242 SERIES CONNECTOR 224202115W1

J322C15TG001

R3012

CHIP RES. 1/10W J 180 Ω

RRXAJR5Z0181

CN4102

242 SERIES CONNECTOR 224202115W1

J322C15TG001

R3014

CHIP RES. 1/10W J 6.8k Ω

RRXAJR5Z0682

R3015

CHIP RES. 1/10W J 220 Ω

RRXAJR5Z0221

R3019

CHIP RES. 1/10W J 330 Ω

RRXAJR5Z0331

R3020

CHIP RES. 1/10W J 5.1k Ω

RRXAJR5Z0512

Ref. No.

Description
SD-B CBA
Consists of the following:

Part No.
----------

CONNECTORS

SD-C CBA
Ref. No.

SWITCHES

Description
SD-C CBA
Consists of the following:

Part No.
----------

SW3003

TACT SWITCH SKQSAB

SST0101AL038

SW3004

TACT SWITCH SKQSAB

SST0101AL038

SW3005

TACT SWITCH SKQSAB

SST0101AL038

C4001

CHIP CERAMIC CAP.(1608) B K 0.1µF/16V

CHD1CK30B104

SW3006

TACT SWITCH SKQSAB

SST0101AL038

C4002

CHIP CERAMIC CAP.(2125) B K 10µF/6.3V

CHE0KK30B106

1VM421170

CN4002

CONNECTOR IC CARD MES 9PIN 1939115-1

CN4004

242 SERIES CONNECTOR TUC-P15X-B1 WHT JCTUB15TG002
ST

R4022

CHIP RES.(1608) 1/10W 0 Ω

CAPACITORS

CONNECTORS

MISCELLANEOUS
B70

TAPE HIMERON(60*6) HG470ED

FL3000

FL DM182-GINK

TVFD150FT018

RS3000

PHOTO LINK MODULE KSM-713TH2P

USESJRSKK061

POWER SW CBA
Ref. No.

Description
POWER SW CBA
Consists of the following:

JF18090AP001

RESISTOR
RRXAZR5Z0000

Part No.
----------

DIODE
D3007

LED(RED) LTL-1CHEE

NPQZLTL1CHEE

SWITCH
SW3007

TACT SWITCH SKQSAB

SST0101AL038

MISCELLANEOUS
WX3000

WIRE ASSEMBLY FRONT-SWITCH 3P WIRE
WX1E5K50-001

WX1E5K50-001

SD ASSEMBLY
Ref. No.

Description

Part No.

SD ASSEMBLY
Consists of the following:

1VSA20906

SD-A CBA
SD-B CBA
SD-C CBA

----------------------------

SD-A CBA
Ref. No.

Description
SD-A CBA
Consists of the following:

Part No.
----------

CAPACITOR
C4008

CHIP CERAMIC CAP.(1608) CH J 33pF/50V

CHD1JJ3CH330

CONNECTORS
CN4001

B TO B CONNECTOR 16P SOKET
131101116K2

J313160TG001

CN4003

242 SERIES CONNECTOR TUC-P15X-B1 WHT JCTUB15TG002
ST

L4002

CHIP INDUCTOR LK160882NM-T

LLACMB3TU82N

L4008

CHIP RES.(1608) 1/10W 0 Ω

RRXAZR5Z0000

R4001

CHIP RES. 1/10W J 47 Ω

RRXAJR5Z0470

R4002

CHIP RES. 1/10W J 47 Ω

RRXAJR5Z0470

R4003

CHIP RES. 1/10W J 47 Ω

RRXAJR5Z0470

R4004

CHIP RES. 1/10W J 22 Ω

RRXAJR5Z0220

R4005

CHIP RES. 1/10W J 47 Ω

RRXAJR5Z0470

R4006

CHIP RES. 1/10W J 47 Ω

RRXAJR5Z0470

COILS

RESISTORS

20090604

1-12-5

E5K50EL

DV-BD507

ONKYO CORPORATION
Service Dept. Technical Support : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH (DUISBURG OFFICE)
Hafennr.7602, Logport Office-Center, Bliersheimerstr.80B, 47229 Duisburg, Germany
Tel: +49-2065-90198-00 Fax: +49-2065-90198-40 http://www.eu.onkyo.com/
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.ch.onkyo.com/

HOMEPAGE
http://www.onkyo.com/

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Print high-res
Author                          : P5-200-4
Create Date                     : 2009:06:04 04:27:43Z
Modify Date                     : 2009:06:22 09:47:57-04:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2009:06:22 09:47:57-04:00
Creator Tool                    : PScript5.dll Version 5.2
Format                          : application/pdf
Creator                         : P5-200-4
Title                           : E5K50UD.book
Document ID                     : uuid:43667603-b2b5-41fc-9fa0-31139f366a12
Instance ID                     : uuid:420a690e-653e-4a00-815f-4630f7bd9421
Page Layout                     : SinglePage
Page Mode                       : UseOutlines
Page Count                      : 54

EXIF Metadata provided by EXIF.tools

E5K50UD DVBD507

Navigation menu

Versions of this User Manual:

Views

Navigation