E5K50UD DVBD507
User Manual: DVBD507
Open the PDF directly: View PDF 
.
Page Count: 54
- SPECIFICATIONS
- LASER BEAM SAFETY PRECAUTIONS
- IMPORTANT SAFETY PRECAUTIONS
- STANDARD NOTES FOR SERVICING
- CABINET DISASSEMBLY INSTRUCTIONS
- HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
- FIRMWARE RENEWAL MODE
- BLOCK DIAGRAMS
- SCHEMATIC DIAGRAMS / CBA AND TEST POINTS
- EXPLODED VIEWS
- MECHANICAL PARTS LIST
- ELECTRICAL PARTS LIST
DV-BD507
SERVICE MANUAL
SERVICE MANUAL
RC-730DV
BLU-RAY DISC PLAYER
Black model
MODEL DV-BD507(B)CDC1N
120 V AC, 60HzB CDC1N
Ref. No. 4149
072009
SAFETY-RELATED COMPONENT
WARNING!!
COMPONENTS IDENTIFIED BY MARK ON THE
SCHEMATIC DIAGRAM AND IN THE PARTS LIST ARE
CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
REPLACE THESE COMPONENTS WITH ONKYO
PARTS WHOSE PART NUMBERS APPEAR AS SHOWN
IN THIS MANUAL.
MAKE LEAKAGE-CURRENT OR RESISTANCE
MEASUREMENTS TO DETERMINE THAT EXPOSED
PARTS ARE ACCEPTABLY INSULATED FROM THE
SUPPLY CIRCUIT BEFORE RETURNING THE
APPLIANCE TO THE CUSTOMER.
TABLE OF CONTENTS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-1-1
Laser Beam Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2-1
Important Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3-1
Standard Notes for Servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-4-1
Cabinet Disassembly Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-5-1
How to Initialize the BLU-RAY Disc Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-6-1
Firmware Renewal Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7-1
Block Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-8-1
Schematic Diagrams / CBA and Test Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-9-1
Exploded Views. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-10-1
Mechanical Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-11-1
Electrical Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-12-1
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby Laboratories.
1-1-1 E5K50SP
SPECIFICATIONS
1-2-1 B2NLBSP
LASER BEAM SAFETY PRECAUTIONS
This BD player uses a pickup that emits a laser beam.
The laser beam is emitted from the location shown in the figure. When checking the laser diode, be sure to keep
your eyes at least 30 cm away from the pickup lens when the diode is turned on. Do not look directly at the laser
beam.
CAUTION: Use of controls and adjustments, or doing procedures other than those specified herein, may result in
hazardous radiation exposure.
Location: Inside Top of BD mechanism.
Do not look directly at the laser beam coming
from the pickup or allow it to strike against your
skin.
Drive Mechanism Assembly
Laser Beam Radiation
Laser Pickup
Turntable
1-3-1 BDN_ISP
IMPORTANT SAFETY PRECAUTIONS
Product Safety Notice
Some electrical and mechanical parts have special
safety-related characteristics which are often not
evident from visual inspection, nor can the protection
they give necessarily be obtained by replacing them
with components rated for higher voltage, wattage,
etc. Parts that have special safety characteristics are
identified by a # on schematics and in parts lists. Use
of a substitute replacement that does not have the
same safety characteristics as the recommended
replacement part might create shock, fire, and/or other
hazards. The Product’s Safety is under review
continuously and new instructions are issued
whenever appropriate. Prior to shipment from the
factory, our products are carefully inspected to confirm
with the recognized product safety and electrical
codes of the countries in which they are to be sold.
However, in order to maintain such compliance, it is
equally important to implement the following
precautions when a set is being serviced.
Precautions during Servicing
A. Parts identified by the # symbol are critical for
safety. Replace only with part number specified.
B. In addition to safety, other parts and assemblies
are specified for conformance with regulations
applying to spurious radiation. These must also be
replaced only with specified replacements.
Examples: RF converters, RF cables, noise
blocking capacitors, and noise blocking filters, etc.
C. Use specified internal wiring. Note especially:
1) Wires covered with PVC tubing
2) Double insulated wires
3) High voltage leads
D. Use specified insulating materials for hazardous
live parts. Note especially:
1) Insulation tape
2) PVC tubing
3) Spacers
4) Insulators for transistors
E. When replacing AC primary side components
(transformers, power cord, etc.), wrap ends of
wires securely about the terminals before
soldering.
F. Observe that the wires do not contact heat
producing parts (heat sinks, oxide metal film
resistors, fusible resistors, etc.).
G. Check that replaced wires do not contact sharp
edges or pointed parts.
H. When a power cord has been replaced, check that
5 - 6 kg of force in any direction will not loosen it.
I. Also check areas surrounding repaired locations.
J. Be careful that foreign objects (screws, solder
droplets, etc.) do not remain inside the set.
K. When connecting or disconnecting the internal
connectors, first, disconnect the AC plug from the
AC outlet.
1-3-2 BDN_ISP
Safety Check after Servicing
Examine the area surrounding the repaired location for damage or deterioration. Observe that screws, parts, and
wires have been returned to their original positions. Afterwards, do the following tests and confirm the specified
values to verify compliance with safety standards.
1. Clearance Distance
When replacing primary circuit components, confirm
specified clearance distance (d) and (d’) between
soldered terminals, and between terminals and
surrounding metallic parts. (See Fig. 1)
Table 1: Ratings for selected area
Note: This table is unofficial and for reference only. Be
sure to confirm the precise values.
2. Leakage Current Test
Confirm the specified (or lower) leakage current
between B (earth ground, power cord plug prongs) and
externally exposed accessible parts (RF terminals,
antenna terminals, video and audio input and output
terminals, microphone jacks, earphone jacks, etc.) is
lower than or equal to the specified value in the table
below.
Measuring Method (Power ON):
Insert load Z between B (earth ground, power cord plug
prongs) and exposed accessible parts. Use an AC
voltmeter to measure across the terminals of load Z.
See Fig. 2 and the following table.
Table 2: Leakage current ratings for selected areas
Note:This table is unofficial and for reference only. Be sure to confirm the precise values.
AC Line Voltage Clearance Distance (d), (d’)
120 V ≥ 3mm(d)
≥ 4mm(d’)
AC Line Voltage Load Z Leakage Current (i) One side of power cord plug
prongs (B) to:
120 V
2kΩ RES.
Connected in
parallel
i≤0.7mA AC Peak
i≤2mA DC RF or
Antenna terminals
50kΩ RES.
Connected in
parallel
i≤0.7mA AC Peak
i≤2mA DC A/V Input, Output
Chassis or Secondary Conductor
Primary Circuit
Fig. 1
d' d
Fig. 2
AC Voltmeter
(High Impedance)
Exposed Accessible Part
BOne side of
Power Cord Plug Prongs
Z
1-4-1 BDN_SN
STANDARD NOTES FOR SERVICING
Circuit Board Indications
1. The output pin of the 3 pin Regulator ICs is
indicated as shown.
2. For other ICs, pin 1 and every fifth pin are
indicated as shown.
3. The 1st pin of every male connector is indicated as
shown.
Instructions for Connectors
1. When you connect or disconnect the FFC (Flexible
Foil Connector) cable, be sure to first disconnect
the AC cord.
2. FFC (Flexible Foil Connector) cable should be
inserted parallel into the connector, not at an
angle.
Pb (Lead) Free Solder
When soldering, be sure to use the Pb free solder.
How to Remove / Install Flat Pack-IC
1. Removal
With Hot-Air Flat Pack-IC Desoldering Machine:
1. Prepare the hot-air flat pack-IC desoldering
machine, then apply hot air to the Flat Pack-IC
(about 5 to 6 seconds). (Fig. S-1-1)
2. Remove the flat pack-IC with tweezers while
applying the hot air.
3. Bottom of the flat pack-IC is fixed with glue to the
CBA; when removing entire flat pack-IC, first apply
soldering iron to center of the flat pack-IC and heat
up. Then remove (glue will be melted). (Fig. S-1-6)
4. Release the flat pack-IC from the CBA using
tweezers. (Fig. S-1-6)
CAUTION:
1. The Flat Pack-IC shape may differ by models. Use
an appropriate hot-air flat pack-IC desoldering
machine, whose shape matches that of the Flat
Pack-IC.
2. Do not supply hot air to the chip parts around the
flat pack-IC for over 6 seconds because damage
to the chip parts may occur. Put masking tape
around the flat pack-IC to protect other parts from
damage. (Fig. S-1-2)
To p V i ew
Out In
Bottom View
Input
5
10
Pin 1
Pin 1
FFC Cable
Connector
CBA
* Be careful to avoid a short circuit.
Fig. S-1-1
1-4-2 BDN_SN
3. The flat pack-IC on the CBA is affixed with glue, so
be careful not to break or damage the foil of each
pin or the solder lands under the IC when
removing it.
With Soldering Iron:
1. Using desoldering braid, remove the solder from
all pins of the flat pack-IC. When you use solder
flux which is applied to all pins of the flat pack-IC,
you can remove it easily. (Fig. S-1-3)
2. Lift each lead of the flat pack-IC upward one by
one, using a sharp pin or wire to which solder will
not adhere (iron wire). When heating the pins, use
a fine tip soldering iron or a hot air desoldering
machine. (Fig. S-1-4)
3. Bottom of the flat pack-IC is fixed with glue to the
CBA; when removing entire flat pack-IC, first apply
soldering iron to center of the flat pack-IC and heat
up. Then remove (glue will be melted). (Fig. S-1-6)
4. Release the flat pack-IC from the CBA using
tweezers. (Fig. S-1-6)
Hot-air
Flat Pack-IC
Desoldering
Machine
CBA
Flat Pack-IC
Tweezers
Masking
Ta p e
Fig. S-1-2
Flat Pack-IC Desoldering Braid
Soldering Iron
Fig. S-1-3
Fine Tip
Soldering Iron
Sharp
Pin
Fig. S-1-4
1-4-3 BDN_SN
With Iron Wire:
1. Using desoldering braid, remove the solder from
all pins of the flat pack-IC. When you use solder
flux which is applied to all pins of the flat pack-IC,
you can remove it easily. (Fig. S-1-3)
2. Affix the wire to a workbench or solid mounting
point, as shown in Fig. S-1-5.
3. While heating the pins using a fine tip soldering
iron or hot air blower, pull up the wire as the solder
melts so as to lift the IC leads from the CBA
contact pads as shown in Fig. S-1-5.
4. Bottom of the flat pack-IC is fixed with glue to the
CBA; when removing entire flat pack-IC, first apply
soldering iron to center of the flat pack-IC and heat
up. Then remove (glue will be melted). (Fig. S-1-6)
5. Release the flat pack-IC from the CBA using
tweezers. (Fig. S-1-6)
Note: When using a soldering iron, care must be
taken to ensure that the flat pack-IC is not
being held by glue. When the flat pack-IC is
removed from the CBA, handle it gently
because it may be damaged if force is applied.
2. Installation
1. Using desoldering braid, remove the solder from
the foil of each pin of the flat pack-IC on the CBA
so you can install a replacement flat pack-IC more
easily.
2. The “●” mark on the flat pack-IC indicates pin 1.
(See Fig. S-1-7.) Be sure this mark matches the
pin 1 on the PCB when positioning for installation.
Then presolder the four corners of the flat pack-IC.
(See Fig. S-1-8.)
3. Solder all pins of the flat pack-IC. Be sure that
none of the pins have solder bridges.
To Solid
Mounting Point
Soldering Iron
Iron Wire
or
Hot Air Blower
Fig. S-1-5
Fine Tip
Soldering Iron
CBA
Flat Pack-IC
Tweezers
Fig. S-1-6
Example :
Pin 1 of the Flat Pack-IC
is indicated by a " " mark. Fig. S-1-7
Presolder
CBA
Flat Pack-IC
Fig. S-1-8
1-4-4 BDN_SN
Instructions for Handling Semi-
conductors
Electrostatic breakdown of the semi-conductors may
occur due to a potential difference caused by
electrostatic charge during unpacking or repair work.
1. Ground for Human Body
Be sure to wear a grounding band (1 MΩ) that is
properly grounded to remove any static electricity that
may be charged on the body.
2. Ground for Workbench
Be sure to place a conductive sheet or copper plate
with proper grounding (1 MΩ) on the workbench or
other surface, where the semi-conductors are to be
placed. Because the static electricity charge on
clothing will not escape through the body grounding
band, be careful to avoid contacting semi-conductors
with your clothing.
<Incorrect>
CBA
Grounding Band
Conductive Sheet or
Copper Plate
1MΩ
1MΩ
<Correct>
CBA
1-5-1 E5K50DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to “Reference Notes.”
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
2. The BD Main CBA & BD Mechanism Assembly
is adjusted as a unit at factory. Therefore, do
not disassemble it. Replace the BD Main CBA
& BD Mechanism Assembly as a unit.
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] Top Cover D1 9(S-1) ---
[2] Front
Assembly D2 *5(L-1), *3(L-2),
*5(S-2) *CN2002,
*CN3001 1
[3] Front CBA D2 --------------- ---
[4] Power SW
CBA D2 --------------- ---
[5]
BD Main
CBA & BD
Mechanism
Assembly
D3
(S-3), 2(S-4), 4(S-5),
2(S-6), 4(S-7),
*CN6001, *CN7101,
*CN7601, Main PCB
Earth Plate, Front
Shield
2
[6] SD-A CBA D3 Desolder ---
[7] SD-B CBA D3 Desolder ---
[8] SD-C CBA D3 --------------- ---
[9] Rear Panel D4 2(S-8), 4(S-9),
2(S-10) ---
[10] Motor DC
Fan D4 *CN2004, Fan Holder ---
[11] AV CBA D5 5(S-11) ---
[2] Front Assembly
[6] SD-A CBA
[1] Top Cover
[9] Rear Panel
[11] AV CBA
[12] Power Holder
[10] Motor DC Fan
[5] BD Main CBA &
BD Mechanism Assembly
[3] Front CBA
[4] Power SW CBA
[13] Shield Bracket
[14] SD PCB Bracket
[7] SD-B CBA
[8] SD-C CBA
[12] Power
Holder D5 (S-12) ---
[13] Shield
Bracket D5 4(S-13) ---
[14] SD PCB
Bracket D5 (S-14) ---
↓
(1) ↓
(2) ↓
(3) ↓
(4) ↓
(5)
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
1-5-2 E5K50DC
[1] Top Cover
(S-1)
(S-1)
(S-1)
Fig. D1
[3] Front CBA
[4] Power SW
CBA
[2] Front Assembly
CN2002
(L-1)
(L-1)
(L-2)
(L-2)
CN3001
(S-2)
(S-2)
(S-2)
Fig. D2
[5] *BD Main
CBA & BD
Mechanism
Assembly
[6] SD-A CBA
[7] SD-B CBA
[8] SD-C CBA
CN7101
CN7601
(S-6)
(S-3)
(S-4)
Main PCB
Earth Plate
Front Shield
CN6001
(S-5)
(S-7)
* See Reference Notes 2.
(S-7)
Fig. D3
[9] Rear Panel
[10] Motor
DC Fan
(S-9)
(S-8)
(S-8)
(S-10)
CN2004
Fan Holder
Fig. D4
1-5-3 E5K50DC
[11] AV CBA
[13] Shield
Bracket
[14] SD PCB
Bracket
(S-13)
(S-14)
(S-11)
(S-12)
[12] Power Holder
Fig. D5
1-5-4 E5K50DC
3. How to Eject Manually
1. Remove the Top Cover.
2. Insert a screwdriver, etc. into the Hole A straightly so that the Portion A is pushed.
3. Pull the tray out manually and remove a disc.
Portion A
Screwdriver,
hexagon wrench
1-6-1 E5K50INT
HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
To put the program back at the factory-default,
initialize the BD player as the following procedure.
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. a appears on the screen.
Fig. a
4. Press [ C ] button on the remote control unit.
Fig. b appears on the screen and Fig. c appears
on the VFD.
Fig. b
Fig. c
5. To exit this mode, press [ON/STANDBY] button.
"*******" differ depending on the models.
F/W Name
Version
Region
Version Info
: *******
: *.***
: *-*
EXIT <POWER>EEPROM CLEAR <STOP>
"*******" differ depending on the models.
F/W Name
Version
Region
Version Info
: *******
: *.***
: *-*
EXIT <POWER>EEPROM CLEAR <STOP>
EEPROM CLEAR : OK
1-7-1 E5K50FW
FIRMWARE RENEWAL MODE
Note: The file extension of the available firmware is
“b20”.
1. Turn the power on and remove the disc on the tray
and close the tray.
2. To put the BD player into version up mode, press
[9], [8], [7], [6], and [POP UP MENU/MENU]
buttons on the remote control unit in that order.
The tray will open automatically.
Fig. a appears on the screen and Fig. b appears
on the VFD.
Fig. a Version Up Mode Screen
Fig. b VFD in Version Up Mode
3. Load the disc for version up.
4. The BD player enters the F/W version up mode
automatically. Fig. c appears on the screen and
Fig. d appears on the VFD. Make sure to insert the
proper F/W for the state of this model.
Fig. c Programming Mode Screen (Example)
Fig. d VFD in Programming Mode (Example)
The appearance shown in (*1) of Fig. c is
described as follows:
Fig. e VFD in Vresion Up Mode
5. After programming is finished, the checksum on
the VFD (Fig. f).
Fig. f
VFD upon Finishing the Programming Mode (Example)
Checksum appears on the VFD then the tray will
open automatically. Remove the disc on the tray.
At this time, no button is available.
6. Unplug the AC cord from the AC outlet. Then plug
it again.
7. Turn the power on.
8. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. g appears on the screen.
Fig. g
F/W VERSION UP MODE F/W Name: ******* Ver. *.***
Please insert a Disc
for F/W Version Up
"*******" differs depending on the models.
1. ALL
Now Loading...
Ver. *.*** ************A*.b20
(*1)
"*******" differs depending on the models.
F/W VERSION UP MODE F/W Name: ******* Ver. *.***
EXIT : POWER
No. Appearance State
1 Now Loading... Loading the disc
2 Reading...
Sending files into the
memory.
After reading, automatically
the tray opens.
3 See FL Display Writing new version data,
the progress will be displayed
as shown in Fig. e.
"*******" differ depending on the models.
F/W Name
Version
Region
Version Info
: *******
: *.***
: *-*
EXIT <POWER>EEPROM CLEAR <STOP>
1-7-2 E5K50FW
9. Press [ C ] button on the remote control unit.
Fig. h appears on the screen and Fig. i appears on
the VFD.
Fig. h
Fig. i
10. To exit this mode, press [ON/STANDBY] button.
How to Verify the Firmware Version
1. Turn the power on.
2. Remove the disc on the tray and close the tray.
3. Press [1], [2], [3], [4], and [DISPLAY] buttons on
the remote control unit in that order.
Fig. j appears on the screen.
Fig. j
4. To exit this mode, press [ON/STANDBY] button.
"*******" differ depending on the models.
F/W Name
Version
Region
Version Info
: *******
: *.***
: *-*
EXIT <POWER>EEPROM CLEAR <STOP>
EEPROM CLEAR : OK
"*******" differ depending on the models.
F/W Name
Version
Region
Version Info
: *******
: *.***
: *-*
EXIT <POWER>EEPROM CLEAR <STOP>
1-8-1
BLOCK DIAGRAMS
System Control Block Diagram
E5K50BLS
IC2000
IC6903 (EEPROM)
IC6001
(SUB MICRO CONTROLLER)
(MAIN MICRO CONTROLLER)
62
19 20 21 22
CN2002 CN3000
FL3000
VFD
64KEY-1
97REMOTE
15 13FL-RESET
16 14FL-STB
17 15FL-SCL
18 16FL-SDA
CN7101
XRST
XTRST
CN2001
CN7101 CN2001
88SUB-TXD
99SYS-RESET
77SUB-RXD
22CEC
53
POWER
-LED
D3007
POWER
POWER
FRONT CBA
BD MAIN CBA AV CBA
RS3000
REMOTE
SENSOR
KEY
SWITCH
27
49
34
33
3
56
14
8
9
RESET
4
PWSW1
37
PWSW2
31
A33-PW-CONT
15 SUB-TXD
16
AE32
T34
SUB-RXD
28 CEC-IN
CEC 30 CEC-OUT
13
21MUTE1 MUTE1
PWSW1
PWSW2
A33-PW-CONT
POWER-LED
SYS-RESET
V32
TXD1
U34
V31
W30
K2
J2
J1
J3
J4
G5
F4
H5
G4
H4
RXD1
SCL0
SDA0
MII-RXD3
MII-RXD2
MII-RXD1
MII-RXD0
MII-RXCLK
MII-TXD3
MII-TXD0
MII-TXCLK
MII-TXD2
MII-TXD1
SCL
SDA
FL-SDA
FL-SCL
FL-STB
50
FL-RESET
REMOTE
KEY-1
OSC2
OSC1
8MHz
X'TAL
X2000
EV+3.3V
IC2001
RESET
BUFFER
Q2619
JK7501
Q6701
Q6702
32
FL-SW FL-SW
63
FAN-LOCK FAN-LOCK
22MUTE2 MUTE2
TO POWER SUPPLY
BLOCK DIAGRAM
TO VIDEO
BLOCK DIAGRAM
24AUDIO-MUTE AUDIO-MUTE
25FAN-CONT1 FAN-CONT1
26FAN-CONT2 FAN-CONT2
TO AUDIO
BLOCK DIAGRAM
IC6401
(ETHERNET INTERFACE)
5
12
33
35
36
38
39
28
23
22
21
20
11
10
9
6
P-ON+1.8V RESET
IC6701
2 1
EV+5V
Q3000
BUFFER
Q2618
SWITCHING
Q2620, Q2621
SW3007
CN3001
WX3000
POWER SW CBA
1
POWER-LED
1
2
KEY-1
2
RX(-)
JK6401
ETHERNET JACK
RX(+)
TX(-)
TX(+)
1
2
3
6
ETHERNET
INTERFACE
1-8-2
Digital Signal Process 1 Block Diagram
E5K50BLD1
BD MECHANISM
BD MAIN CBA
W1
V2
U3
HU(+) 5
HU(-) 6
HV(+) 7
HV(-) 8
HW(+) 9
HW(-) 10
HB(-) 11
CN603
IC6001 (MAIN MICRO CONTROLLER/DIGITAL SIGNAL PROCESS)
IC603 (MOTOR DRIVE) IC604 (OP AMP)
TRACKING
ACTUATOR
DRIVE
OEIC
(CD/DVD)
IC602 (MOTOR DRIVE)
IC603 (MOTOR DRIVE)
IC601 (MOTOR DRIVE)
IC201 (FRONT-END PROCESSOR)
FE
DIGITAL
SIGNAL
PROCESS
STREAM
CONTROL
COPY
PROTECT
AACS
BD+
CSS
CPRM
MATRIX
RF
GENERATOR
D22
B22
A24
E23
M32
M31
J34
J33
102-105
97-100
24
21
19
13
14
15
16
17
18
SLD2(+) 4
SLD2(-) 3
SLD1(+) 2
SLD1(-) 1
CN601
LOAD(+) 5
LOAD(-) 6
TRAY-OUT 2
TRAY-IN 1
INLIMIT 4
CN602
TD 3
TR 4
FD1 1
FR1 2
EXPA(+) 9
EXPA(-) 7
EXPB(+) 10
EXPB(-) 8
A-D 21-24
E-H 26-29
RF(+) 17
RF(-) 18
BDRF(+) 14
BDRF(-) 15
S D ATA 2 4 0
S D ATA 1
SCLK1
S D ATA 2
S D ATA 1
SCLK2
SCLK1
SCLK2 38
CN101
CN101
32
33
2
1
2
3
6
5
21
20
19
18
LOADING
MOTOR DRIVE
14
15
COLLIMATE
LENS
MOTOR DRIVE
SLED
MOTOR DRIVE
SPINDLE
MOTOR
DRIVE
12
FOCUS 1
ACTUATOR
DRIVE
TRACKING-CONTROL
TO DIGITAL SIGNAL
PROCESS 2 BLOCK
DIAGRAM
(IC6001)
FOCUS1-CONTROL
FOCUS2-CONTROL
SLED1-CONTROL
SLED2-CONTROL
TRAY-OUT
TRAY-IN
INLIMIT
SPINDLE-CONTROL
SPINDLE-FG
LOAD-CONTROL
EXPA-CONTROL
EXPB-CONTROL
22
83 78 79
17
16
FOCUS 2
ACTUATOR
DRIVE
12
13
23
10
D24
C24
4
30
C22
D21
E21
B3
13
E24
10
B25
4
107-110
86
85
88
87
G34
61 WBL
H34
B28
59
20 SE02
ASENV
A28
18 SE01
B34
C33
66
65
54
53
RF
EQUALIZER
WOB
/LPP
MPX
1 2
7 6
8 9
D23
OEIC
(BD)
LASER
DIODE
DRIVE
SLED
MOTOR
TRAY-OUT
TRAY-IN
INNER
SW
SPINDLE
MOTOR
FD2 6
FR2 5
LOADING
MOTOR
VIDEO SIGNAL AUDIO SIGNAL
1-8-3 E5K50BLD2
Digital Signal Process 2 Block Diagram
BD MAIN CBA
ED (0-7)
C0DQ (0-31)
C0A (0-12)
C1DQ (0-31)
C1A (0-12)
MEDIA
PROCESSOR
Java (BD-J)
MPEG-2
DiVX
VC-1
H.264
DECODER
HD (TS)
SD (PS)
FROM
DIGITAL
SIGNAL
PROCESS 1
BLOCK
DIAGRAM
(IC6001)
CN7601CN4001
MEMORY
I/F
SD I/F
IC6001 (MAIN MICRO CONTROLLER/DIGITAL SIGNAL PROCESS)
IC6703
(CLOCK GENE.)
AH34
C15
A2
B6
B5
IC6902
(NAND FLASH MEMORY)
NAND FLASH
MEMORY (64M x 8bit)
(DDR2 SDRAM)
IC6501,IC6502
DDR2 SDRAM
(1Gbit )
11 6SDDAT0
13 4SDDAT1
116SDDAT2
314SDDAT3
98SDCLK
(DDR2 SDRAM)
IC6601,IC6602
DDR2 SDRAM
(512Mbit)
A4,A8,A9,B4,B9,C5,C9,
C11,D8,D10,E10,E11
A3,A6,A7,B7,C4,C6,C7,
C8,D6,D9,E8,E12
AF32,AG34,
AH33,AJ34
I/P CONVERTER
/SCALING
DIGITAL
VIDEO
OUT
DIGITAL
AUDIO
OUT
VIDEO
DAC
CLK
VSYNC
HSYNC
SDCLK
SD DATA(0-3)
TO
VIDEO
BLOCK
DIAGRAM
VIDEO
PRMCLK
PRMVS
PRMHS
PRMC(0-11)
PRMY(0-11)
SCL3
33M CLOCK
33M CLOCK
74M CLOCK
27M CLOCK
768K CLOCK
SCL
SDA3
HDMI-DATA0
HDMI-DATA1
HDMI-DATA2
HDMI-DATA3
HDMI-MCK
HDMI-BCK
HDMI-LRCK
HDMI-SPDIF
MC
MD
DAC-SCK
DAC-BCK
DAC-LRCK
MS1
DATA
SPDIF
X6701
27MHz
OSC
CLOCK
GENE.
SDA
VIDEO-Y(I/P)
VIDEO-Pb/Cb
VIDEO-Pr/Cr
TO
AUDIO
BLOCK
DIAGRAM
VIDEO SIGNAL AUDIO SIGNAL
D18
B17
F17
SCL3 R33
SDA3 U31
C14
B14
A12
D12
B13
AC31
A13
B12
TO
VIDEO
BLOCK
DIAGRAM
E13
AL34
B10
B11
A10
A11
D11
C12
C10
2
3
1
16
7
8
9
10
E20
A19
D20
AL5
SD-A CBA
SD
CARD
SLOT
CN4003
SD-B CBA
CN4102 CN4101
11 11SDDAT0
13 13SDDAT1
11SDDAT2
33SDDAT3
99SDCLK
SD-C CBA
CN4002 CN4004
11 5SDDAT0
13 3SDDAT1
115SDDAT2
313SDDAT3
97SDCLK
1-8-4
Video Block Diagram
AV CBABD MAIN CBA
HDMI-DATA0
HDMI-DATA1
HDMI-DATA2
HDMI-DATA3
HDMI-MCK
HDMI-BCK
HDMI-LRCK
HDMI-SPDIF
70-73,75-78,
92,94,102,103
50,51,53-57,59,
87,88,90,91
TO DIGITAL
SIGNAL
PROCESS 2
BLOCK DIAGRAM
TO DIGITAL
SIGNAL
PROCESS 2
BLOCK DIAGRAM
2dB
AMP
LPF
6.75MHz
13.5/37MHz
13.5/37MHz
13.5/37MHz
17
2dB
AMP
LPF
10
15
VIDEO
SCL3
SDA3
PRMCLK
PRMVS
PRMHS
PRMC(0-11)
PRMY(0-11)
VIDEO-Y(I/P)
VIDEO-Pb/Cb
VIDEO-Pr/Cr
TO SYSTEM CONTROL
BLOCK DIAGRAM
MUTE1
2dB
AMP
LPF
MUTE1
MUTE2
12
VIDEO-Pb/Cb
OUT
VIDEO-Y
OUT
VIDEO-Pr/Cr
OUT
JK2200
JK2300
C2323
8 20
T.M.D.S DATA2-
T.M.D.S DATA2+
T.M.D.S DATA1-
T.M.D.S DATA1+
T.M.D.S DATA0-
T.M.D.S DATA0+
T.M.D.S CLOCK+
T.M.D.S CLOCK-
JK7501
HDMI-CONNECTOR
DDC DATA
DDC CLOCK
HOT PLUG
DETECT
IC7501 (HDMI INTERFACE)
REGISTER
IIC
I/F
VIDEO
I/F
DDC
I/F
AUTHENT
/CATION
KEY
EXCHANGE
AUDIO
I/F
HDCP
CIPHER/
ENCRYPTOR
TMDS
ENCODER
AV
CONTROLLER
TMDS
SERIALIZER
46
45
44
42
41
39
36
35
23
25
19
21
15
17
13
11
113
116 118
120
119
VIDEO SIGNAL AUDIO SIGNAL
CLK
CN2001CN7101
VS
HS
121
83
84
IC2300 (VIDEO DRIVER)
4dB
AMP
4dB
AMP
4dB
AMP
4dB
AMP LPF 25
2dB
AMP
75Ω
DRIVER
75Ω
DRIVER
75Ω
DRIVER
75Ω
DRIVER
MUTE2
3VIDEO OUT
(COMPOSITE)
2
13
16 16VIDEO-Y(I/P)
18 18VIDEO-Pb/Cb
20 20VIDEO-Pr/Cr
14 14VIDEO
19
15
16
3
1
6
4
9
7
10
12
E5K50BLV
1-8-5
Audio Block Diagram
E5K50BLA
AV CBABD MAIN CBA
AUDIO SIGNAL
IC7001
(AUDIO D/A CONVERTER)
AUDIO
DAC
3
4
5
8
2
7
6
(L-CH)
(R-CH)
1
R-CH
MUTE
L-CH
MUTE
16
14
15 AUDIO(L)-
OUT
AUDIO(R)-
OUT
Q2203
MUTE-ON
Q2202
MUTE-ON
Q2200
DRIVE
Q2201
DRIVE
JK2200 (REAR)
IC2200
(OP AMP)
7
1
6
2
24 24AUDIO(L)
22 22AUDIO(R)
26 26AUDIO(L)-MUTE
25 25AUDIO(R)-MUTE
55SPDIF
CN7101 CN2001
DIGITAL
AUDIO OUT
(COAXIAL)
TO SYSTEM CONTROL
BLOCK DIAGRAM
AUDIO-MUTE
TO DIGITAL
SIGNAL
PROCESS 2
BLOCK DIAGRAM
MC
MD
DAC-SCK
DAC-BCK
DAC-LRCK
MS1
DATA
SPDIF
DIGITAL
AUDIO OUT
(OPTICAL)
JK2100
(REAR)
JK2400 (REAR)
BUFFER
Q2100
1-8-6
Power Supply Block Diagram
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
"Ce symbole reprèsente un fusible à fusion rapide."
CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
ATTENTION : Pour une protection continue les risqes
d'Incele n'utiliser que des fusible de même type.
Risk of fire-replace fuse as marked.
"This symbol means fast operating fuse."
A V
F
E5K50BLP
IC1001
(
SWITCHING CONTROL
)
HOT
COLD
Q2600
Q2604 Q2608, Q2609
Q2606
Q2603
Q2607
Q2602
Q2601
Q1011
Q2605
Q1003
VDD
7
6
T1001
11
12
15
13
10
9
16
14
AC1001 F1001
2A 250V
LINE
FILTER
L1001
A V
F
IC1003
ERROR
VOLTAGE DET
IC1011
IC2602
ERROR
VOLTAGE DET
1
2
P-ON+14.5V-A
P-ON+14.5V-B
SHUNT
REG.
+1.8V
REG. IC2601
IC2600
D1001 - D1004
BRIDGE
RECTIFIER
SWITCHING
CONTROL
5
2
FAN-VCC 1
2FAN-LOCK
CN2004
+3.3V
REG.
3,4 P-ON+10.5V
2 P-ON+5V(1)
CN2000
5,6 P-ON+3.3V
17-20
P-ON+1.2V
23 P-ON+5V(2)
9-11
P-ON+1.8V
SW+14.5V
EV+5V
EV+3.3V
TO BD MAIN
CBA
(CN6001)
AUDIO+3.3V
P-ON+3.3V
F1
F2
TO SYSTEM
CONTROL
BLOCK
DIAGRAM
A33-PW-CONT
FAN-LOCK
PWSW2
PWSW1
FL-SW
FL
P-ON+5V
SW+10.5V
SW+5V
SW+5V CURRENT
LIMIT
Q2613
Q2611
Q2612
+3.3V
REG.
+1.2V
REG.
6
1
3
HOT CIRCUIT. BE CAREFUL.
FAN
Q2204,Q2205
SW+3.3V
AV CBA
Q2014
Q2012 Q2101
Q2013
FAN-CONT1
FAN-CONT2
FAN
CONTROL
FAN
CONTROL
Q2000,Q2001
Q2002,Q2003
(HIGH SPEED)
(LOW SPEED)
AC CORD
Q2610
2
4
4
3
1-9-1 BDN_SC
SCHEMATIC DIAGRAMS / CBA AND TEST POINTS
Standard Notes
WARNING
Many electrical and mechanical parts in this chassis
have special characteristics. These characteristics
often pass unnoticed and the protection afforded by
them cannot necessarily be obtained by using
replacement components rated for higher voltage,
wattage, etc. Replacement parts that have these
special safety characteristics are identified in this
manual and its supplements; electrical components
having such features are identified by the mark “#” in
the schematic diagram and the parts list. Before
replacing any of these components, read the parts list
in this manual carefully. The use of substitute
replacement parts that do not have the same safety
characteristics as specified in the parts list may create
shock, fire, or other hazards.
Notes:
1. Do not use the part number shown on these
drawings for ordering. The correct part number is
shown in the parts list, and may be slightly
different or amended since these drawings were
prepared.
2. All resistance values are indicated in ohms
(K = 103, M = 106).
3. Resistor wattages are 1/4W or 1/6W unless
otherwise specified.
4. All capacitance values are indicated in µF
(P = 10-6 µF).
5. All voltages are DC voltages unless otherwise
specified.
1-9-2 BDN_SC
LIST OF CAUTION, NOTES, AND SYMBOLS USED IN THE SCHEMATIC DIAGRAMS ON
THE FOLLOWING PAGES:
1. CAUTION:
FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, REPLACE ONLY WITH THE
SAME TYPE FUSE.
ATTENTION: POUR UNE PROTECTION CONTINUE LES RISQES D'INCELE N'UTILISER
QUE DES FUSIBLE DE MÊME TYPE.
RISK OF FIRE-REPLACE FUSE AS MARKED.
2. CAUTION:
Fixed Voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown, first check to see that all components in the power supply circuit are not
defective before you connect the AC plug to the AC power supply. Otherwise it may cause some components
in the power supply circuit to fail.
3. Note:
1. Do not use the part number shown on the drawings for ordering. The correct part number is shown in the
parts list, and may be slightly different or amended since the drawings were prepared.
2. To maintain original function and reliability of repaired units, use only original replacement parts which are
listed with their part numbers in the parts list section of the service manual.
4. Voltage indications for PLAY and STOP mode on the schematics are as shown below:
5. How to read converged lines
6. Test Point Information
A V
F
This symbol means fast operating fuse.
Ce symbole represente un fusible a fusion rapide.
23
1
5.0
(2.5)
5.0
The same voltage for
both PLAY & STOP modes
Indicates that the voltage
is not consistent here.
PLAY mode
STOP mode
(Unit: Volt)
1-D3
Distinction Area
Line Number
(1 to 3 digits)
Examples:
1. "1-D3" means that line number "1" goes to the line numbe
r
"1" of the area "D3".
2. "1-B1" means that line number "1" goes to the line number
"1" of the area "B1".
3
2
1
ABCD
1-B1
1-D3
AREA D3
AREA B1
: Indicates a test point with a jumper wire across a hole in the PCB.
: Used to indicate a test point with a component lead on foil side.
: Used to indicate a test point with no test pin.
: Used to indicate a test point with a test pin.
1-9-3
AV 1/3 Schematic Diagram
E5K50SCAV1
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
"Ce symbole reprèsente un fusible à fusion rapide."
CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
ATTENTION : Pour une protection continue les risqes
d'Incele n'utiliser que des fusible de même type.
Risk of fire-replace fuse as marked.
"This symbol means fast operating fuse."
A V
F
1-9-4
AV 2/3 Schematic Diagram
E5K50SCAV2
1-9-5
AV 3/3 Schematic Diagram
E5K50SCAV3
1-9-6
Front & Power SW Schematic Diagram
E5K50SCF
1-9-7 E5K50SCSD
SD-A, SD-B & SD-C Schematic Diagram
1-9-8
BD Main 1/11 Schematic Diagram
E5K50SCBD1
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.
1 NOTE:
1-9-9
BD Main 2/11 Schematic Diagram
E5K50SCBD2
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.
1 NOTE:
1-9-10
BD Main 3/11 Schematic Diagram
E5K50SCBD3
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.
1 NOTE:
1-9-11
BD Main 4/11 Schematic Diagram
E5K50SCBD4
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.
1 NOTE:
1-9-12
BD Main 5/11 Schematic Diagram
E5K50SCBD5
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.
1 NOTE:
1-9-13
BD Main 6/11 Schematic Diagram
E5K50SCBD6
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.
1 NOTE:
1-9-14
BD Main 7/11 Schematic Diagram
E5K50SCBD7
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.
1 NOTE:
1-9-15
BD Main 8/11 Schematic Diagram
E5K50SCBD8
1-9-16
BD Main 9/11 Schematic Diagram
E5K50SCBD9
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.
1 NOTE:
1-9-17
BD Main 10/11 Schematic Diagram
E5K50SCBD10
1-9-18
BD Main 11/11 Schematic Diagram
E5K50SCBD11
The order of pins shown in this diagram is different from that of actual IC6001.
IC6001 is divided into nine and shown as IC6001 (1/9) ~ IC6001 (9/9) in this BD Main Schematic Diagram Section.
1 NOTE:
1-9-19
AV CBA Top View
BE5K20F01012A
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
"Ce symbole reprèsente un fusible à fusion rapide."
CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
ATTENTION : Pour une protection continue les risqes
d'Incele n'utiliser que des fusible de même type.
Risk of fire-replace fuse as marked.
"This symbol means fast operating fuse."
A V
F
Because a hot chassis ground is present in the power
supply circut, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly, when troubleshooting this type power supply
circuit, a variable isolation transformer is required.
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
1-9-20
AV CBA Bottom View
BE5K20F01012A
CAUTION !
Fixed voltage (or Auto voltage selectable) power supply circuit is used in this unit.
If Main Fuse (F1001) is blown , check to see that all components in the power supply
circuit are not defective before you connect the AC plug to the AC power supply.
Otherwise it may cause some components in the power supply circuit to fail.
"Ce symbole reprèsente un fusible à fusion rapide."
CAUTION !
For continued protection against fire hazard,
replace only with the same type fuse.
ATTENTION : Pour une protection continue les risqes
d'Incele n'utiliser que des fusible de même type.
Risk of fire-replace fuse as marked.
"This symbol means fast operating fuse."
A V
F
Because a hot chassis ground is present in the power
supply circut, an isolation transformer must be used.
Also, in order to have the ability to increase the input
slowly, when troubleshooting this type power supply
circuit, a variable isolation transformer is required.
NOTE:
The voltage for parts in hot circuit is measured using
hot GND as a common terminal.
1-9-21
BE5K50F01031A
Front CBA Top View
Front CBA Bottom View
Power SW CBA Top View
Power SW CBA Bottom View
BE5K50F01031B
1-9-22
BE5K10F01021A
SD-A CBA Top View
SD-A CBA Bottom View
BE5K10F01021C
SD-C CBA Top View
SD-C CBA Bottom View
BE5K10F01051
SD-B CBA Top View
SD-B CBA Bottom View
1-10-1 E5K50CEX
EXPLODED VIEWS
Cabinet
2L055
BD Main CBA &
BD Mechanism Assembly
B47
A3
2L071
2L070
2L081
See Electrical Parts List
for parts with this mark.
Some Ref. Numbers are
not in sequence.
Front CBA
SD-A CBA
SD-B CBA
SD-C CBA
AV CBA
Power SW CBA
1B1
F1001
2L081 2L083
2L084
2L084
A4
2L082
2L082
2L082
FM1001
B5
2L024
A6
A6
A22
2L038
A6
A6
A1X
B15
B69
2L086
2L085 2L049
2L034 AC1001
B13
A2
B68
B70
2L024
2L024
2L051
2L051
B32
2L026
B4
1-10-2 E5K50PEX
Packing
S2
S3
S1
X19
S1
X10
X40 X2-A X2-B
X14X6
Lower Side Upper Side
X1-A
Some Ref. Numbers
are not in sequence.
A21
X1-B
A21
20090604 1-11-1 E5K50CA
MECHANICAL PARTS LIST
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTE: Parts that are not assigned part numbers
(---------) are not available.
Ref. No. Description Part No.
A1X FRONT ASSEMBLY E5K50UD 1VM123179
A2 CHASSIS E5K50UD 1VM330278
A3 TOP COVER E5K20UD 1VM122080
A4 REAR PANEL E5K50UD 1VM227696
A6 FOOT ASSEMBLY E5H50UD 1VM430199A
A21 BAR CODE LABEL E5K50UD ----------
A22 LICENSE LABEL E5K12UD ----------
2L024 SCREW P-TIGHT M3X8 BIND HEAD+ GBJP3080
2L026 SCREW C-TIGHT M3X6 E5610UD 0VM412937A
2L034 SCREW C-TIGHT M3X6 E5610UD 0VM412937A
2L038 SCREW C-TIGHT M3X6 E5610UD 0VM412937A
2L049 SCREW C-TIGHT M3X6 E5610UD 0VM412937A
2L051 SCREW C-TIGHT M3X6 E5610UD 0VM412937A
2L070 B-TIGHT SCREW M3X8 E5E00UD 1VM428563
2L071 B-TIGHT SCREW M3X8 E5E00UD 1VM428563
2L081 S-TIGHT SCREW M3X6 E5E00UD 1VM428564
2L082 SCREW TAP TIGHT M3X5 BIND HEAD+BLK NI GBHC3050
2L083 S-TIGHT SCREW M3X6 E5E00UD 1VM428564
2L084 S-TIGHT SCREW M3X6 E5E00UD 1VM428564
2L085 SCREW S-TIGHT M3X10 E5610UD 0VM412936A
2L086 SCREW S-TIGHT M3X5 E5K10UD 1VM431079
B4 POWER HOLDER E5K20UD 1VM225697
B5 FAN HOLDER E6700UD 1VM320504L
B13 SD PCB BRACKET E5K10UD 1VM329203
B15 SHIELD BRACKET E5K10UD 1VM226756
B32 MAIN PCB EARTH PLATE E5K20UD 1VM430800
B68 FRONT SHIELD E5K20UD 1VM328838
B69 PORON SPONGE E5K20UD 1VM431100
FM1001 MOTOR DC FAN 2D57NL100010 MMEZR12XNR05
PAC KI NG
S1 SIDE PAD E5K50UD 1VM123159
S2 GIFT BOX CARTON E5K50UD 1VM330520
S3 SET BAG E7708UA 0DM400731D
ACCESSORIES
X1-A#OWNERS MANUAL(EN) E5K50UD 1VMN27515
X1-B#OWNERS MANUAL(ES/FR) E5K50UD 1VMN27615
X2-A QUICK GUIDE(EN) E5K50UD 1VMN27593
X2-B QUICK GUIDE(ES/FR) E5K50UD 1VMN27616
X6 MANGANESE DRY BATTERY R6UWC/2STA XB0M311MS003
X10 ACCESSORY BAG E5795ED 0VM416059
X14 AV CORD 1000/BLACK WPZ0102TM018
X19 REMOTE CONTROL UNIT NB821UD NB821UD
X40 WARRANTY CARD E5H50UD 1VMN26325
20090604 1-12-1 E5K50EL
ELECTRICAL PARTS LIST
PRODUCT SAFETY NOTE: Products marked with a
# have special characteristics important to safety.
Before replacing any of these components, read
carefully the product safety notice in this service
manual. Don't degrade the safety of the product
through improper servicing.
NOTES:
1. Parts that are not assigned part numbers (---------)
are not available.
2. Tolerance of Capacitors and Resistors are noted
with the following symbols.
BD MAIN CBA & BD MECHANISM
ASSEMBLY
AV CBA
C.....±0.25% D.....±0.5% F.....±1%
G.....±2% J......±5% K.....±10%
M.....±20% N.....±30% Z.....+80/-20%
Ref. No. Description Part No.
1B1 BD MAIN CBA & BD MECHANISM ASSEMBLY N77R0BUN
Ref. No. Description Part No.
AV CBA
Consists of the following:
1VSA22027
CAPACITORS
C1001 CAP CERAMIC 470pF/2KV/K CA3D471PAN17
C1002#LINE ACROSS CAP. 0.047µF/250V K CT2E473DC016
C1004 CHIP CERAMIC CAP.(1608) CH J 22pF/50V CHD1JJ3CH220
C1005 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102
C1006 CHIP CERAMIC CAP.(1608) B K 0.033µF/50V CHD1JK30B333
C1007#SAFETY CAP. 3300pF/250V CCD2EMA0E332
C1008 ELECTROLYTIC CAPACITOR
ZR200TA221K18EB
CA2D221DYG04
C1009 ELECTROLYTIC CAP. 47µF/35V/M CEE47RENW016
C1010 METALIZED FILM CAP. 0.0022µF/400V K CT2H222DT034
C1013 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103
C1014 POLYESTER FILM CAP. (PB FREE) 0.0068µF/
100V J
CA2A682DT018
C1015 CERAMIC CAP. B K 470pF/500V CCD2JKS0B471
C1016 ELECTROLYTIC CAP. 220µF/10V M CEB221ENW016
C1017#LINE ACROSS CAP. 0.047µF/250V K CT2E473DC016
C1018 ELECTROLYTIC CAP 2200µF/25V/M CED222ENW009
C1019 ELECTROLYTIC CAP 4700µF/6.3V/M CEA472ENW009
C1021 ELECTROLYTIC CAP. 22µF/50V/M CEF22RENW016
C1022 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C1023 ELECTROLYTIC CAP. 220µF/25V/M CED221ENW016
C1024 ELECTROLYTIC CAP 2200µF/25V/M CED222ENW009
C1025 ELECTROLYTIC CAP 4700µF/6.3V/M CEA472ENW009
C1032 ELECTROLYTIC CAP. 100µF/6.3V/M CEA101ENW016
C1033 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103
C1037 ELECTROLYTIC CAP. 47µF/6.3V/M CEA47RENW016
C1140 ELECTROLYTIC CAP. 22µF/50V/M CEF22RENW016
C2000 CHIP CERAMIC CAP.(1608) B K 0.1µF/25V CHD1EK30B104
C2001 ELECTROLYTIC CAP. 100µF/16V/M CEC101ENW016
C2002 CHIP CERAMIC CAP.(1608) B K 0.1µF/25V CHD1EK30B104
C2005 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2007 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2009 CHIP CERAMIC CAP.(1608) CH J 100pF/50V CHD1JJ3CH101
C2011 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2013 CHIP CERAMIC CAP.(1608) B K 0.015µF/50V CHD1JK30B153
C2016 ELECTROLYTIC CAP. 47µF/6.3V/M CEA47RENW016
C2065 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102
C2100 CHIP CERAMIC CAP.(1608) B K 0.1µF/25V CHD1EK30B104
C2104 ELECTROLYTIC CAP. 47µF/6.3V/M CEA47RENW016
C2106 CHIP CERAMIC CAP. CH D 8pF/50V CHD1JD3CH8R0
C2108 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2180 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2181 ELECTROLYTIC CAP. 220µF/6.3V/M CEA221ENW016
C2204 ELECTROLYTIC CAP. 47µF/25V/M CED47RENW016
C2205 ELECTROLYTIC CAP. 470µF/6.3V/M CEA471ENW016
C2206 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2207 ELECTROLYTIC CAP. 10µF/16V/M CEC10RENW016
C2208 ELECTROLYTIC CAP. 10µF/16V/M CEC10RENW016
C2209 CHIP CERAMIC CAP. CH J 220pF/50V CHD1JJ3CH221
C2210 CHIP CERAMIC CAP. CH J 220pF/50V CHD1JJ3CH221
C2211 ELECTROLYTIC CAP. 10µF/16V/M CEC10RENW016
C2212 ELECTROLYTIC CAP. 10µF/16V/M CEC10RENW016
C2213 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2215 CHIP CERAMIC CAP. CH J 39pF/50V CHD1JJ3CH390
C2216 CHIP CERAMIC CAP. CH J 39pF/50V CHD1JJ3CH390
C2280 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2281 ELECTROLYTIC CAP. 220µF/6.3V/M CEA221ENW016
C2283 ELECTROLYTIC CAP. 1000µF/6.3V/M CEA102ENW016
C2284 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2286 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2300 ELECTROLYTIC CAP. 100µF/6.3V/M CEA101ENW016
C2301 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2314 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2315 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2316 ELECTROLYTIC CAP. 22µF/6.3V/M CEA22RENW016
C2319 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104
C2320 CHIP CERAMIC CAP.(1608) B K 1µF/10V CHD1AK30B105
C2321 CHIP CERAMIC CAP.(1608) B K 1µF/10V CHD1AK30B105
C2322 ELECTROLYTIC CAP. 33µF/10V/M CEB33RENW016
C2323 ELECTROLYTIC CAP. 330µF/6.3V/M CEA331ENW016
C2324 ELECTROLYTIC CAP. 330µF/6.3V/M CEA331ENW016
C2325 ELECTROLYTIC CAP. 33µF/10V/M CEB33RENW016
C2326 ELECTROLYTIC CAP. 330µF/6.3V/M CEA331ENW016
C2327 ELECTROLYTIC CAP. 330µF/6.3V/M CEA331ENW016
C2328 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104
C2329 ELECTROLYTIC CAP. 100µF/6.3V/M CEA101ENW016
C2330 ELECTROLYTIC CAP. 100µF/6.3V/M CEA101ENW016
C2601 ELECTROLYTIC CAP. 1000µF/6.3V/M CEA102ENW016
C2602 ELECTROLYTIC CAP. 1000µF/6.3V/M CEA102ENW016
C2604 ELECTROLYTIC CAP. 10µF/16V/M CEC10RENW016
C2605 ELECTROLYTIC CAP. 47µF/25V/M CED47RENW016
C2606 ELECTROLYTIC CAP. 100µF/6.3V/M CEA101ENW016
C2607 ELECTROLYTIC CAP. 1000µF/6.3V/M CEA102ENW016
C2609 CHIP CERAMIC CAP.(1608) B K 1µF/10V CHD1AK30B105
C2610 CHIP CERAMIC CAP.(1608) B K 0.1µF/25V CHD1EK30B104
C2613 ELECTROLYTIC CAP. 220µF/6.3V/M CEA221ENW016
C2614 CHIP CERAMIC CAP.(1608) B K 0.33µF/10V CHD1AK30B334
C2616 CHIP CERAMIC CAP.(1608) B K 1µF/10V CHD1AK30B105
C2618 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2619 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2620 CHIP CERAMIC CAP. B K 8200pF/50V CHD1JK30B822
Ref. No. Description Part No.
20090604 1-12-2 E5K50EL
C2622 CHIP CERAMIC CAP.(2125) B K 10µF/6.3V CHE0KK30B106
C2623 CHIP CERAMIC CAP.(2125) B K 10µF/6.3V CHE0KK30B106
C2627 CHIP CERAMIC CAP.(1608) B K 1µF/10V CHD1AK30B105
C2629 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2630 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C2631 CHIP CERAMIC CAP.(1608) B K 5600pF/50V CHD1JK30B562
C2632 CHIP CERAMIC CAP.(2125) B K 10µF/6.3V CHE0KK30B106
C2633 CHIP CERAMIC CAP.(2125) B K 10µF/6.3V CHE0KK30B106
C2634 CHIP CERAMIC CAP.(2125) B K 10µF/6.3V CHE0KK30B106
C2638 CHIP CERAMIC CAP. CH J 330pF/50V CHD1JJ3CH331
C2639 CHIP CERAMIC CAP. CH J 220pF/50V CHD1JJ3CH221
C2640 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103
C2652 ELECTROLYTIC CAP. 330µF/6.3V/M CEA331ENW016
C2653 ELECTROLYTIC CAP. 330µF/6.3V/M CEA331ENW016
C2655 ELECTROLYTIC CAP. 470µF/16V/M CEC471ENW016
C2800 CHIP CERAMIC CAP.(1608) B K 0.01µF/50V CHD1JK30B103
C2801 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
CONNECTORS
CN2000 TWG CONNECTOR 23P TWG-P23P-A1 J3TWA23TG001
CN2001 WIRE ASSEMBLY AV-MAIN 26P WX1E5K20-
001
WX1E5K20-001
CN2002 FFC CONNECTOR IMSA-9615S-16A-PP-A JC96J16ER007
CN2004 PH CONNECTOR TOP 2P B2B-PH-K-S
(LF)(SN)
J3PHC02JG029
DIODES
D1001 DIODE 1N5397-B NDLZ001N5397
D1002 DIODE 1N5397-B NDLZ001N5397
D1003 DIODE 1N5397-B NDLZ001N5397
D1004 DIODE 1N5397-B NDLZ001N5397
D1006 DIODE FR154 NDLZ000FR154
D1007 RECTIFIER DIODE BA157 NDQZ000BA157
D1008 RECTIFIER DIODE BA157 NDQZ000BA157
D1010 RECTIFIER DIODE BA157 NDQZ000BA157
D1012 PCB JUMPER D0.6-P15.0 JW15.0T
D1013 SCHOTTKY BARRIER DIODE SMD SK54 ND1Z0000SK54
D1014 SCHOTTKY BARRIER DIODE SMD SK54 ND1Z0000SK54
D1017 DIODE ZENER 5V1BSB-T26 NDTB5R1BST26
D1018 RECTIFIER DIODE BA157 NDQZ000BA157
D1019 DIODE ZENER 18BSB-T26 NDTB018BST26
D1020 DIODE ZENER 18BSB-T26 NDTB018BST26
D1021 DIODE ZENER 6V8BSB-T26 NDTB6R8BST26
D1022 SCHOTTKY BARRIER DIODE SB140 NDQZ000SB140
D1023 SCHOTTKY BARRIER DIODE SMD SK39 ND1Z0000SK39
D1024 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D1036 DIODE ZENER 27BSB-T26 NDTB027BST26
D1037 DIODE ZENER 27BSB-T26 NDTB027BST26
D1137 RECTIFIER DIODE BA157 NDQZ000BA157
D1138 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2001 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2002 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2003 DIODE ZENER 36BSA-T26 NDTA036BST26
D2004 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2600 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2601 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2602 DIODE 1N5406 NDLZ001N5406
D2605 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2606 DIODE ZENER 11BSC-T26 NDTC011BST26
D2608 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2609 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2610 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2612 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2613 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2614 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
Ref. No. Description Part No.
D2615 DIODE SWITCHING 1N4148-F0021 NDTZ01N4148F
D2620 SCHOTTKY BARRIER DIODE SMD SK34 ND1Z0000SK34
D2621 SCHOTTKY BARRIER DIODE SMD SK34 ND1Z0000SK34
D2624 DIODE ZENER 4V7BSB-T26 NDTB4R7BST26
ICS
IC1001 IC SWITCHING FA5542N-A2-TE1 SOP8 QSZBA0TFD005
IC1003#PHOTOCOUPLER PS2561A-1(W) QPEWPS2561A1
IC1011 IC SHUNT REGULATOR SL431A-AT NSZBA0TAUK01
IC1012 IC SHUNT REGULATOR SL431A-AT NSZBA0TAUK01
IC2000 IC SUB MICON MN101C77A GC QSAA0R0MS010
IC2001 RESET IC S-80930CNMC-G80T2G QSCA0T0SK018
IC2200 IC OP AMP UTC4580TE NSCA0T02H001
IC2300 IC VIDEO DRIVER MM1757EHBE QSCA0T0MM001
IC2600 IC VOLTAGE REGULATOR PQ070XFC1SZF /
4PIN
QSZBA0RSH083
IC2601 IC DC-DC CONVERTER BD9323EFJ-E2 QSCA0T0RM002
IC2602 IC DC-DC CONVERTER BD9323EFJ-E2 QSCA0T0RM002
COILS
L1001#LINE FILTER 27MH 5703 LLBG00ZKT009
L1003 POWER INDUCTORS CWKBNP-220K LLF2200KV002
L1004 RADIAL TYPE CHOKE COIL CW68-470K-
841040NP
LLBD00PKV023
L1005 CHOKE COIL 22µH-K LLBD00PKV021
L2100 INDUCTOR(0.47µH K) LAP02TAR47K LLAXKATTUR47
L2201 POWER INDUCTORS CWKBNP-100K LLF1000KV002
L2202 POWER INDUCTORS CWKBNP-100K LLF1000KV002
L2300 RADIAL TYPE CHOKE COIL CW68-470K-
841040NP
LLBD00PKV023
L2301 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
L2306 PCB JUMPER D0.6-P5.0 JW5.0T
L2400 CHOKE COIL 22µH-K LLBD00PKV021
L2600 CHOKE COIL 22µH-K LLBD00PKV021
L2601 CHOKE COIL 22µH-K LLBD00PKV021
TRANSISTORS
Q1003#FET MOS 2SK3563(Q M) QFQZSK3563QM
Q1011 NPN TRANSISTOR 2SC5344 Y NQSY02SC5344
Q1111 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2000 PNP TRANSISTOR 2SA1980M Y NQSY2SA1980M
Q2001 NPN TRANSISTOR RES-IN SRC1203MAT NQSZSRC1203M
Q2002 PNP TRANSISTOR 2SA1980M Y NQSY2SA1980M
Q2003 NPN TRANSISTOR RES-IN SRC1203MAT NQSZSRC1203M
Q2012 PNP TRANSISTOR 2SA1980M Y NQSY2SA1980M
Q2013 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2014 PNP TRANSISTOR 2SA1981Y-AT NQSY02SA1981
Q2100 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2101 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2200 PNP TRANSISTOR RES-IN SRA2205M NQSZSRA2205M
Q2201 PNP TRANSISTOR RES-IN SRA2205M NQSZSRA2205M
Q2202 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2203 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2204 PNP TRANSISTOR 2SA1980M Y NQSY2SA1980M
Q2205 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2600 NPN TRANSISTOR RES-IN SRC1203MAT NQSZSRC1203M
Q2601 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2602 PNP TRANSISTOR 2SA1980M Y NQSY2SA1980M
Q2603 PNP TRANSISTOR 2SA1981Y-AT NQSY02SA1981
Q2604 PNP TRANSISTOR STB1277LY-AT NQSYSTB1277L
Q2605 NPN TRANSISTOR 2SC5344 Y NQSY02SC5344
Q2606 PNP TRANSISTOR STB1277LY-AT NQSYSTB1277L
Q2607 TRANSISTOR(PB FREE) KTC2026-Y/P NQEYKTC2026P
Q2608 PNP TRANSISTOR 2SA1980MG-AT NQSG2SA1980M
Q2609 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2610 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Ref. No. Description Part No.
20090604 1-12-3 E5K50EL
Q2611 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2612 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2613 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2614 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2618 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2619 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2620 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
Q2621 NPN TRANSISTOR 2SC5343MG-AT NQSG2SC5343M
RESISTORS
R1004 CARBON RES. 1/4W J 75k ΩRCX4JATZ0753
R1005 CARBON RES. 1/4W J 33 ΩRCX4JATZ0330
R1006 CARBON RES. 1/4W J 100k ΩRCX4JATZ0104
R1008 CARBON RES. 1/4W J 56 ΩRCX4JATZ0560
R1009 CARBON RES. 1/4W J 100 ΩRCX4JATZ0101
R1011 CARBON RES. 1/4W J 10 ΩRCX4JATZ0100
R1012 CARBON RES. 1/4W J 4.7k ΩRCX4JATZ0472
R1013 METAL OXIDE FILM RES. 2W J 47k ΩRN02473ZU001
R1014 METAL OXIDE FILM RES. 2W J 0.68 ΩRN02R68ZU001
R1015 CHIP RES. 1/10W J 1 ΩRRXAJR5Z01R0
R1016 CHIP RES. 1/10W J 470 ΩRRXAJR5Z0471
R1017 CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R1018 CHIP RES. 1/10W J 1 ΩRRXAJR5Z01R0
R1019 CHIP RES. 1/10W J 680 ΩRRXAJR5Z0681
R1020 CHIP RES. 1/10W F 2k ΩRRXAFR5H2001
R1021 CARBON RES. 1/4W J 10k ΩRCX4JATZ0103
R1022 CARBON RES. 1/4W J 10k ΩRCX4JATZ0103
R1023 CARBON RES. 1/4W J 5.1k ΩRCX4JATZ0512
R1024 CHIP RES. 1/10W F 270 ΩRRXAFR5H2700
R1025 CHIP RES. 1/10W F 1.0k ΩRRXAFR5H1001
R1026 CHIP RES. 1/10W F 1.0k ΩRRXAFR5H1001
R1027 CARBON RES. 1/4W J 10k ΩRCX4JATZ0103
R1039 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R1040 CARBON RES. 1/4W J 100 ΩRCX4JATZ0101
R1041 PCB JUMPER D0.6-P5.0 JW5.0T
R1046 CHIP RES. 1/10W F 1.5k ΩRRXAFR5H1501
R1047 CHIP RES. 1/10W F 100 ΩRRXAFR5H1000
R1048 CHIP RES. 1/10W F 4.7k ΩRRXAFR5H4701
R1142 CHIP RES. 1/10W J 1 ΩRRXAJR5Z01R0
R1143 CHIP RES. 1/10W F 18k ΩRRXAFR5H1802
R1144 CHIP RES. 1/10W F 10k ΩRRXAFR5H1002
R1145 CHIP RES. 1/10W J 330k ΩRRXAJR5Z0334
R2000 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2001 CHIP RES. 1/10W J 100 ΩRRXAJR5Z0101
R2002 CHIP RES. 1/10W J 100 ΩRRXAJR5Z0101
R2004 CHIP RES. 1/10W J 470 ΩRRXAJR5Z0471
R2005 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R2006 CHIP RES. 1/10W J 100 ΩRRXAJR5Z0101
R2007 CHIP RES. 1/10W J 100 ΩRRXAJR5Z0101
R2008 CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R2018 CHIP RES. 1/10W J 39k ΩRRXAJR5Z0393
R2019 CHIP RES. 1/10W J 22k ΩRRXAJR5Z0223
R2020 CHIP RES. 1/10W J 100 ΩRRXAJR5Z0101
R2024 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2025 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2028 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2029 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2031 CHIP RES. 1/10W J 100 ΩRRXAJR5Z0101
R2032 CHIP RES. 1/10W J 100 ΩRRXAJR5Z0101
R2033 CHIP RES. 1/10W J 100 ΩRRXAJR5Z0101
R2034 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R2035 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2039 CHIP RES. 1/10W J 680 ΩRRXAJR5Z0681
Ref. No. Description Part No.
R2050 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2051 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2053 CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R2056 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2058 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2060 CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R2061 CHIP RES. 1/10W J 5.6k ΩRRXAJR5Z0562
R2063 CARBON RES. 1/4W J 620 ΩRCX4JATZ0621
R2064 CARBON RES. 1/4W J 620 ΩRCX4JATZ0621
R2065 CARBON RES. 1/4W J 10 ΩRCX4JATZ0100
R2066 CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R2067 CHIP RES. 1/10W J 5.6k ΩRRXAJR5Z0562
R2069 CARBON RES. 1/4W J 120 ΩRCX4JATZ0121
R2070 CARBON RES. 1/4W J 120 ΩRCX4JATZ0121
R2073 CARBON RES. 1/4W J 620 ΩRCX4JATZ0621
R2074 CARBON RES. 1/4W J 620 ΩRCX4JATZ0621
R2091 CARBON RES. 1/4W J 47k ΩRCX4JATZ0473
R2092 CARBON RES. 1/4W J 47k ΩRCX4JATZ0473
R2093 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2094 CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R2095 CHIP RES. 1/10W J 3.9k ΩRRXAJR5Z0392
R2100 CHIP RES. 1/10W J 2k ΩRRXAJR5Z0202
R2101 CHIP RES. 1/10W J 2.2k ΩRRXAJR5Z0222
R2102 CHIP RES. 1/10W J 2.2k ΩRRXAJR5Z0222
R2103 CHIP RES. 1/10W J 220 ΩRRXAJR5Z0221
R2104 CHIP RES. 1/10W J 75 ΩRRXAJR5Z0750
R2105 CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R2109 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R2115 CARBON RES. 1/4W J 5.6 ΩRCX4JATZ05R6
R2116 CARBON RES. 1/4W J 5.6 ΩRCX4JATZ05R6
R2117 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2118 CARBON RES. 1/4W J 10 ΩRCX4JATZ0100
R2208 CHIP RES. 1/10W F 24k ΩRRXAFR5H2402
R2209 CHIP RES. 1/10W F 24k ΩRRXAFR5H2402
R2210 CHIP RES. 1/10W J 8.2k ΩRRXAJR5Z0822
R2211 CHIP RES. 1/10W J 8.2k ΩRRXAJR5Z0822
R2212 CHIP RES. 1/10W F 33.0k ΩRRXAFR5H3302
R2213 CHIP RES. 1/10W F 33.0k ΩRRXAFR5H3302
R2214 CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R2215 CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R2216 CHIP RES. 1/10W J 820 ΩRRXAJR5Z0821
R2217 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2218 CHIP RES. 1/10W J 820 ΩRRXAJR5Z0821
R2219 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2220 CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R2221 CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R2223 CHIP RES. 1/10W J 4.7k ΩRRXAJR5Z0472
R2224 CHIP RES. 1/10W J 2.2k ΩRRXAJR5Z0222
R2226 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2227 CHIP RES. 1/10W J 220 ΩRRXAJR5Z0221
R2228 CHIP RES. 1/10W J 220 ΩRRXAJR5Z0221
R2229 CHIP RES. 1/10W J 2.2k ΩRRXAJR5Z0222
R2230 CHIP RES. 1/10W J 4.7k ΩRRXAJR5Z0472
R2284 CHIP RES. 1/10W J 10 ΩRRXAJR5Z0100
R2285 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2286 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2287 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2288 CHIP RES. 1/10W J 1.8k ΩRRXAJR5Z0182
R2301 CHIP RES.(1608) 1/10W F 82.0 ΩRRXAFR5H82R0
R2302 CHIP RES.(1608) 1/10W F 82.0 ΩRRXAFR5H82R0
R2303 CHIP RES.(1608) 1/10W F 82.0 ΩRRXAFR5H82R0
R2304 CHIP RES.(1608) 1/10W F 82.0 ΩRRXAFR5H82R0
R2305 CHIP RES.(1608) 1/10W F 82.0 ΩRRXAFR5H82R0
Ref. No. Description Part No.
20090604 1-12-4 E5K50EL
FRONT ASSEMBLY
FRONT CBA
R2307 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R2309 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2310 CHIP RES. 1/10W J 75 ΩRRXAJR5Z0750
R2311 CHIP RES. 1/10W J 75 ΩRRXAJR5Z0750
R2312 CHIP RES. 1/10W J 75 ΩRRXAJR5Z0750
R2313 CHIP RES. 1/10W J 75 ΩRRXAJR5Z0750
R2315 CHIP RES. 1/10W J 27k ΩRRXAJR5Z0273
R2325 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R2341 CHIP RES. 1/10W F 4.7k ΩRRXAFR5H4701
R2342 CHIP RES. 1/10W F 2.7k ΩRRXAFR5H2701
R2343 CHIP RES. 1/10W F 1.5k ΩRRXAFR5H1501
R2344 CHIP RES. 1/10W F 1.2k ΩRRXAFR5H1201
R2345 CHIP RES. 1/10W F 1.2k ΩRRXAFR5H1201
R2600 CHIP RES. 1/10W J 4.7k ΩRRXAJR5Z0472
R2601 CHIP RES. 1/10W J 4.7k ΩRRXAJR5Z0472
R2602 CHIP RES. 1/10W J 2.2k ΩRRXAJR5Z0222
R2603 CHIP RES. 1/10W J 4.7k ΩRRXAJR5Z0472
R2604 CARBON RES. 1/4W J 4.7k ΩRCX4JATZ0472
R2606 CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R2607 CHIP RES. 1/10W J 4.7k ΩRRXAJR5Z0472
R2608 CHIP RES. 1/10W J 4.7k ΩRRXAJR5Z0472
R2609 CHIP RES. 1/10W J 4.7k ΩRRXAJR5Z0472
R2610 CARBON RES. 1/4W J 220 ΩRCX4JATZ0221
R2612 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2613 CHIP RES. 1/10W F 10k ΩRRXAFR5H1002
R2616 CHIP RES. 1/10W F 15k ΩRRXAFR5H1502
R2617 CHIP RES. 1/10W F 2k ΩRRXAFR5H2001
R2620 CHIP RES. 1/10W J 4.7k ΩRRXAJR5Z0472
R2621 CARBON RES. 1/4W J 82 ΩRCX4JATZ0820
R2622 CARBON RES. 1/4W J 82 ΩRCX4JATZ0820
R2636 CARBON RES. 1/4W J 33 ΩRCX4JATZ0330
R2637 METAL OXIDE FILM RES. 1W J 1.2 ΩRN011R2ZU001
R2638 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2639 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2650 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2651 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2652 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2653 CHIP RES. 1/10W J 10k ΩRRXAJR5Z0103
R2654 CHIP RES. 1/10W J 5.1k ΩRRXAJR5Z0512
R2655 CHIP RES. 1/10W J 8.2k ΩRRXAJR5Z0822
R2656 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2657 CHIP RES. 1/10W J 2.7k ΩRRXAJR5Z0272
R2658 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R2659 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R2660 CHIP RES. 1/10W F 1.5k ΩRRXAFR5H1501
R2661 CHIP RES. 1/10W F 3.3k ΩRRXAFR5H3301
R2662 CHIP RES. 1/10W F 1.5k ΩRRXAFR5H1501
R2663 CHIP RES. 1/10W F 2.2k ΩRRXAFR5H2201
R2664 CHIP RES. 1/10W F 3.3k ΩRRXAFR5H3301
R2665 CHIP RES. 1/10W J 100 ΩRRXAJR5Z0101
R2667 CHIP RES. 1/10W J 330 ΩRRXAJR5Z0331
R2669 CHIP RES. 1/10W J 27k ΩRRXAJR5Z0273
R2671 CHIP RES. 1/10W J 220k ΩRRXAJR5Z0224
R2673 CHIP RES. 1/10W J 2.2M ΩRRXAJR5Z0225
R2674 CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R2675 CHIP RES. 1/10W J 220 ΩRRXAJR5Z0221
R2676 CHIP RES. 1/10W J 100k ΩRRXAJR5Z0104
R2678 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R2679 CHIP RES. 1/10W J 47k ΩRRXAJR5Z0473
R2680 CHIP RES. 1/10W J 27k ΩRRXAJR5Z0273
MISCELLANEOUS
2L055 SCREW S-TIGHT M3X8 BIND HEAD+ GBJS3080
Ref. No. Description Part No.
AC1001#AC CORD W/O A GND WIRE UL/CSA/1700/NO/
BLACK
WAC1720LW001
B47 HEAT SINK E2A00JD 1VM424636E
F1001#FUSE TIME RAG FSL 250V 2A(EM) PDGJAB0NG202
FH1001 FUSE HOLDER MSF-015 LF (B110) XH01Z00LY002
FH1002 FUSE HOLDER MSF-015 LF (B110) XH01Z00LY002
JK2100 RCA JACK(BLACK) MSP-251V-01 NI FE LF JXRL010LY125
JK2200 PIN JACK 3P MSD-243V-48 NI FE LF JXRL030LY167
JK2300 RCA JACK 3PIN MSD-243V-18 NI FE LF JXRL030LY132
JK2400 FIBER OPTIC TRANS.MODULE 0C-0805T*002 JWHHA00JD002
JP2201 PCB JUMPER D0.6-P7.0 JW7.0T
JP2204 PCB JUMPER D0.6-P25.0 JW25.0T
JP2208 PCB JUMPER D0.6-P8.5 JW8.5T
JP2209 PCB JUMPER D0.6-P24.0 JW24.0T
JP2210 PCB JUMPER D0.6-P28.0 JW28.0T
JP2211 PCB JUMPER D0.6-P13.0 JW13.0T
JP2213 PCB JUMPER D0.6-P13.0 JW13.0T
JP2215 PCB JUMPER D0.6-P8.0 JW8.0T
JP2216 PCB JUMPER D0.6-P5.0 JW5.0T
JP2217 PCB JUMPER D0.6-P5.0 JW5.0T
JP2219 PCB JUMPER D0.6-P15.0 JW15.0T
JP2222 PCB JUMPER D0.6-P27.5 JW27.5T
JP2225 PCB JUMPER D0.6-P25.0 JW25.0T
JP2226 PCB JUMPER D0.6-P13.0 JW13.0T
JP2227 PCB JUMPER D0.6-P10.5 JW10.5T
JP2228 PCB JUMPER D0.6-P17.0 JW17.0T
JP2229 PCB JUMPER D0.6-P5.0 JW5.0T
SA1001#VARISTOR 10D 471K SVR NVQZVR10D471
T1001#TRANS POWER 8733 LTT2PC0KT050
X2000 CERAMIC RESONATOR ZTT8.00MT47 FY0805PLN004
Ref. No. Description Part No.
FRONT ASSEMBLY
Consists of the following:
1VSA22025
FRONT CBA
POWER SW CBA
----------
----------
Ref. No. Description Part No.
FRONT CBA
Consists of the following:
----------
CAPACITORS
C3000 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C3001 ELECTROLYTIC CAP. 22µF/50V/M/H7 CEF22RENW025
C3002 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C3003 ELECTROLYTIC CAP. 100µF/6.3V/M/H7 CEA101ENW025
C3005 CHIP CERAMIC CAP.(1608) B K 1000pF/50V CHD1JK30B102
C3006 CHIP CERAMIC CAP.(1608) F Z 0.1µF/50V CHD1JZ30F104
C3007 ELECTROLYTIC CAP. 100µF/6.3V/M/H7 CEA101ENW025
C3008 CHIP CERAMIC CAP.(1608) B K 0.1µF/50V CHD1JK30B104
CONNECTORS
CN3000 WIRE ASSEMBLY FRONT-AV 16P WX1E5K10-
002
WX1E5K10-002
CN3001 CONNECTOR PRINT OSU S3B-PH-K-
S(LF)(SN)
J3PHC03JG030
COIL
L3001 CHIP INDUCTOR LB 2016T101K LLC101KTU007
TRANSISTOR
Q3000 NPN TRANSISTOR SMD 2SC5343SFG NQ1G2SC5343S
RESISTORS
R3000 CHIP RES. 1/10W J 10 ΩRRXAJR5Z0100
Ref. No. Description Part No.
20090604 1-12-5 E5K50EL
POWER SW CBA
SD ASSEMBLY
SD-A CBA
SD-B CBA
SD-C CBA
R3001 CHIP RES. 1/10W J 10 ΩRRXAJR5Z0100
R3002 CHIP RES. 1/10W J 12k ΩRRXAJR5Z0123
R3003 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
R3004 CHIP RES. 1/10W J 1k ΩRRXAJR5Z0102
R3005 CHIP RES. 1/10W J 150 ΩRRXAJR5Z0151
R3012 CHIP RES. 1/10W J 180 ΩRRXAJR5Z0181
R3014 CHIP RES. 1/10W J 6.8k ΩRRXAJR5Z0682
R3015 CHIP RES. 1/10W J 220 ΩRRXAJR5Z0221
R3019 CHIP RES. 1/10W J 330 ΩRRXAJR5Z0331
R3020 CHIP RES. 1/10W J 5.1k ΩRRXAJR5Z0512
SWITCHES
SW3003 TACT SWITCH SKQSAB SST0101AL038
SW3004 TACT SWITCH SKQSAB SST0101AL038
SW3005 TACT SWITCH SKQSAB SST0101AL038
SW3006 TACT SWITCH SKQSAB SST0101AL038
MISCELLANEOUS
B70 TAPE HIMERON(60*6) HG470ED 1VM421170
FL3000 FL DM182-GINK TVFD150FT018
RS3000 PHOTO LINK MODULE KSM-713TH2P USESJRSKK061
Ref. No. Description Part No.
POWER SW CBA
Consists of the following:
----------
DIODE
D3007 LED(RED) LTL-1CHEE NPQZLTL1CHEE
SWITCH
SW3007 TACT SWITCH SKQSAB SST0101AL038
MISCELLANEOUS
WX3000 WIRE ASSEMBLY FRONT-SWITCH 3P WIRE
WX1E5K50-001
WX1E5K50-001
Ref. No. Description Part No.
SD ASSEMBLY
Consists of the following:
1VSA20906
SD-A CBA
SD-B CBA
SD-C CBA
----------
----------
----------
Ref. No. Description Part No.
SD-A CBA
Consists of the following:
----------
CAPACITOR
C4008 CHIP CERAMIC CAP.(1608) CH J 33pF/50V CHD1JJ3CH330
CONNECTORS
CN4001 B TO B CONNECTOR 16P SOKET
131101116K2
J313160TG001
CN4003 242 SERIES CONNECTOR TUC-P15X-B1 WHT
ST
JCTUB15TG002
COILS
L4002 CHIP INDUCTOR LK160882NM-T LLACMB3TU82N
L4008 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
RESISTORS
R4001 CHIP RES. 1/10W J 47 ΩRRXAJR5Z0470
R4002 CHIP RES. 1/10W J 47 ΩRRXAJR5Z0470
R4003 CHIP RES. 1/10W J 47 ΩRRXAJR5Z0470
R4004 CHIP RES. 1/10W J 22 ΩRRXAJR5Z0220
R4005 CHIP RES. 1/10W J 47 ΩRRXAJR5Z0470
R4006 CHIP RES. 1/10W J 47 ΩRRXAJR5Z0470
Ref. No. Description Part No.
Ref. No. Description Part No.
SD-B CBA
Consists of the following:
----------
CONNECTORS
CN4101 242 SERIES CONNECTOR 224202115W1 J322C15TG001
CN4102 242 SERIES CONNECTOR 224202115W1 J322C15TG001
Ref. No. Description Part No.
SD-C CBA
Consists of the following:
----------
CAPACITORS
C4001 CHIP CERAMIC CAP.(1608) B K 0.1µF/16V CHD1CK30B104
C4002 CHIP CERAMIC CAP.(2125) B K 10µF/6.3V CHE0KK30B106
CONNECTORS
CN4002 CONNECTOR IC CARD MES 9PIN 1939115-1 JF18090AP001
CN4004 242 SERIES CONNECTOR TUC-P15X-B1 WHT
ST
JCTUB15TG002
RESISTOR
R4022 CHIP RES.(1608) 1/10W 0 ΩRRXAZR5Z0000
DV-BD507
ONKYO EUROPE UK Office
Suite 1, Gregories Court, Gregories Road, Beaconsfield, Buckinghamshire, HP9 1HQ
UNITED KINGDOM Tel: +44-(0)1494-681515 Fax: +44(0)-1494-680452
ONKYO U.S.A. CORPORATION
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.
Tel: 201-785-2600 Fax: 201-785-2650 http://www.us.onkyo.com/
ONKYO EUROPE ELECTRONICS GmbH (DUISBURG OFFICE)
Hafennr.7602, Logport Office-Center, Bliersheimerstr.80B, 47229 Duisburg, Germany
Tel: +49-2065-90198-00 Fax: +49-2065-90198-40 http://www.eu.onkyo.com/
Service Dept. Technical Support : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN
Tel: 072-831-8023 Fax: 072-831-8163
ONKYO CORPORATION
http://www.onkyo.com/
HOMEPAGE
ONKYO CHINA LIMITED
Units 2102-2107, Metroplaza Tower I, 223 Hing Fong Road, Kwai Chung,
N.T., HONG KONG Tel: 852-2429-3118 Fax: 852-2428-9039
http://www.ch.onkyo.com/
