PLC Application Manua(curve)l Programmable Logic Controller DVP SC Program O EN 20120416

Programmable Logic Controller DVP-SA MANUAL_PROGRAMACAO_CLP_FAMILIA_DVP_SV_revisao05

User Manual: Programmable Logic Controller DVP-SC

Open the PDF directly: View PDF PDF.
Page Count: 695

DownloadPLC-Application-Manua(curve)l Programmable Logic Controller DVP-SC DVP-PLC-Program O EN 20120416
Open PDF In BrowserView PDF
DVP-PLC Application Manual:
Programming
Table of Contents
Chapter 1

Basic Principles of PLC Ladder Diagram

Foreword: Background and Functions of PLC .......................................................... 1-1
1.1 The Working Principles of Ladder Diagram ........................................................ 1-1
1.2 Differences Between Traditional Ladder Diagram and PLC Ladder Diagram ........ 1-2
1.3 Edition Explanation of Ladder Diagram ............................................................. 1-3
1.4 How to Edit Ladder Diagram ............................................................................. 1-8
1.5 The Conversion of PLC Command and Each Diagram Structure ......................... 1-12
1.6 Simplified Ladder Diagram ............................................................................... 1-15
1.7 Basic Program Designing Examples .................................................................. 1-17

Chapter 2

Functions of Devices in DVP-PLC

2.1 All Devices in DVP-PLC.................................................................................... 2-1
2.2 Values, Constants [K] / [H] ............................................................................... 2-8
2.3 Numbering and Functions of External Input/Output Contacts [X] / [Y].................. 2-10
2.4 Numbering and Functions of Auxiliary Relays [M] .............................................. 2-13
2.5 Numbering and Functions of Step Relays [S] ..................................................... 2-13
2.6 Numbering and Functions of Timers [T] ............................................................. 2-15
2.7 Numbering and Functions of Counters [C] ......................................................... 2-16
2.8 Numbering and Functions of Registers [D], [E], [F] ............................................ 2-31
2.8.1 Data register [D] ........................................................................................ 2-31
2.8.2 Index Register [E], [F] ................................................................................ 2-32
2.8.3 Functions and Features of File Registers .................................................... 2-32
2.9 Pointer [N], Pointer [P], Interruption Pointer [I] .................................................. 2-33
2.10 Special Auxiliary Relays and Special Data Registers ........................................ 2-36
2.11 Functions of Special Auxiliary Relays and Special Registers............................. 2-83
2.12 Communication Addresses of Devices in DVP Series PLC ................................ 2-149
2.13 Error Codes ................................................................................................... 2-151

Chapter 3

Basic Instructions

3.1 Basic Instructions and Step Ladder Instructions ................................................ 3-1

3.2 Explanations on Basic Instructions ................................................................... 3-4

Chapter 4

Step Ladder Instructions

4.1 Step Ladder Instructions [STL], [RET] ............................................................... 4-1
4.2 Sequential Function Chart (SFC) ...................................................................... 4-2
4.3 How does a Step Ladder Instruction Work? ....................................................... 4-3
4.4 Things to Note for Designing a Step Ladder Program ......................................... 4-8
4.5 Types of Sequences ......................................................................................... 4-10
4.6 IST Instruction ................................................................................................. 4-18

Chapter 5

Categories & Use of Application Instructions

5.1 List of Instructions ........................................................................................... 5-1
5.2 Composition of Application Instruction .............................................................. 5-7
5.3 Handling of Numeric Values.............................................................................. 5-12
5.4 E, F Index Register Modification ....................................................................... 5-15
5.5 Instruction Index .............................................................................................. 5-17

Chapter 6

Application Instructions API 00-49

●

( API00 ~ 09) Loop Control.......................................................................... 6-1

●

( API10 ~ 19) Transmission Comparison ...................................................... 6-19

●

( API20 ~ 29) Four Arithmetic Operation ...................................................... 6-34

●

( API30 ~ 39) Rotation & Displacement ........................................................ 6-48

●

( API40 ~ 49) Data Processing .................................................................... 6-59

Chapter 7

Application Instructions API 50-99

●

( API50 ~ 59) High Speed Processing .......................................................... 7-1

●

( API60 ~ 69) Handy Instructions ................................................................. 7-41

●

( API70 ~ 79) Display of External Settings ................................................... 7-71

●

( API80 ~ 88) Serial I/O............................................................................... 7-93

Chapter 8

Application Instructions API 100-149

●

( API100 ~ 109) Communication .................................................................. 8-1

●

( API110 ~ 119) Floating Point Operation ..................................................... 8-21

●

( API120 ~ 129) Floating Point Operation ..................................................... 8-29

●

( API130 ~ 139) Floating Point Operatio....................................................... 8-39

●

( API140 ~ 149) Others ............................................................................... 8-51

Chapter 9

Application Instructions API 150-199

●

( API150 ~ 154) Others ............................................................................... 9-1

●

( API155 ~ 159) Position Control ................................................................. 9-24

●

( API160 ~ 169) Real Time Calendar............................................................ 9-54

●

( API170 ~ 179) Gray Code Conversion/Floating Point Operation .................. 9-65

●

( API180 ~ 199) Matrix ................................................................................ 9-82

●

( API190 ~ 197) Positioning Instruction ........................................................ 9-98

Chapter 10

Application Instructions API 215-246

●

( API202 ~ 207) Others. .............................................................................. 10-1

●

( API215 ~ 223) Contact Type Logic Operation Instruction. ........................... 10-15

●

( API224 ~ 269) Contact Type Compare Instruction ...................................... 10-18

●

( API270 ~ 280) Contact Type Compare Instruction ...................................... 10-25

●

( API281 ~ 292) Contact Type Compare Instruction ...................................... 10-31

Chapter 11

Appendix

11.1

Appendix A: Self Detection Table for Abnormality .......................................... 11-1

11.2

Appendix B: MPU Terminal Layout ............................................................... 11-2

11.3

Appendix C: Terminal Layout for Digital I/O Modules ..................................... 11-6

11.4

Appendix D: Difference between EH2 and EH3 ............................................. 11-9

11.5

Appendix E: Revision History ....................................................................... 11-10

The models that every series includes are as follows.
Series

Model name

DVP-ES

DVP14ES00R2, DVP14ES00T2, DVP14ES01R2, DVP14ES01T2, DVP24ES00R,
DVP24ES00R2, DVP24ES00T2, DVP24ES01R2, DVP24ES01T2, DVP24ES11R2,
DVP30ES00R2, DVP30ES00T2, DVP32ES00R, DVP32ES00R2, DVP32ES00T2,
DVP32ES01R2, DVP32ES01T2, DVP40ES00R2, DVP40ES00T2, DVP60ES00R2,
DVP60ES00T2
DVP10EC00R3, DVP10EC00T3, DVP14EC00R3, DVP14EC00T3, DVP16EC00R3,
DVP16EC00T3, DVP20EC00R3, DVP20EC00T3, DVP24EC00R3, DVP24EC00T3,
DVP30EC00R3, DVP30EC00T3, DVP32EC00R3, DVP32EC00T3, DVP40EC00R3,
DVP40EC00T3, DVP60EC00R3, DVP60EC00T3,

DVP-EX

DVP20EX00R2, DVP20EX00T2, DVP20EX11R2

DVP-SS

DVP14SS11R2, DVP14SS11T2

DVP-SA

DVP12SA11R, DVP12SA11T

DVP-SX

DVP10SX11R, DVP10SX11T

DVP-SC

DVP12SC11T

DVP-EH2

DVP-SV

DVP16EH00R2, DVP16EH00T2, DVP20EH00R2, DVP20EH00T2, DVP32EH00M2,
DVP32EH00R2, DVP32EH00T2, DVP40EH00R2, DVP40EH00T2, DVP48EH00R2,
DVP48EH00T2, DVP60EH00T2, DVP64EH00R2, DVP64EH00T2, DVP80EH00R2,
DVP80EH00T2, DVP32EH00R2-L, DVP32EH00T2-L
DVP28SV11R, DVP28SV11T

DVP-EH3

DVP16EH00R3, DVP16EH00T3, DVP20EH00R3, DVP20EH00T3, DVP32EH00M3,
DVP32EH00R3, DVP32EH00T3, DVP40EH00R3, DVP40EH00T3, DVP48EH00R3,
DVP48EH00T3, DVP60EH00T3, DVP64EH00R3, DVP64EH00T3, DVP80EH00R3,
DVP80EH00T3, DVP32EH00R3-L, DVP32EH00T3-L

DVP-SV2

DVP28SV11R2, DVP28SV11T2

1 Basic Principles of PLC Ladder Diagram
Foreword: Background and Functions of PLC
PLC (Programmable Logic Controller) is an electronic device, previously called “sequence controller”. In 1978,
NEMA (National Electrical Manufacture Association) in the United States officially named it as “programmable logic
controller”. PLC reads the status of the external input devices, e.g. keypad, sensor, switch and pulses, and execute by
the microprocessor logic, sequential, timing, counting and arithmetic operations according the status of the input
signals as well as the pre-written program stored in the PLC. The generated output signals are sent to output devices
as the switch of a relay, electromagnetic valve, motor drive, control of a machine or operation of a procedure for the
purpose of machine automation or processing procedure. The peripheral devices (e.g. personal computer/handheld
programming panel) can easily edit or modify the program and monitor the device and conduct on-site program
maintenance and adjustment. The widely used language in designing a PLC program is the ladder diagram.
With the development of the electronic technology and wider applications of PLC in the industry, for example in
position control and the network function of PLC, the input/output signals of PLC include DI (digital input), AI (analog
input), PI (pulse input), NI (numeric input), DO (digital output), AO (analog output), and PO (pulse output). Therefore,
PLC will still stand important in the industrial automation field in the future.

1.1

The Working Principles of Ladder Diagram
The ladder diagram was a diagram language for automation developed in the WWII period, which is the oldest

and most widely adopted language in automation. In the initial stage, there were only A (normally open) contact, B
(normally closed) contact, output coil, timer and counter…the sort of basic devices on the ladder diagram (see the
power panel that is still used today). After the invention of programmable logic controllers (PLC), the devices
displayable on the ladder diagram are added with differential contact, latched coil and the application commands
which were not in a traditional power panel, for example the addition, subtraction, multiplication and division
operations.
The working principles of the traditional ladder diagram and PLC ladder diagram are basically the same. The
only difference is that the symbols on the traditional ladder diagram are more similar to its original form, and PLC
ladder diagram adopts the symbols that are easy to recognize and shown on computer or data sheets. In terms of the
logic of the ladder diagram, there are combination logic and sequential logic.
1.

Combination Logic
Examples of traditional ladder diagram and PLC ladder diagram for combination logic:
Traditional Ladder Diagram
X0

Y0

X1

X2

Y1
X4

Y2

PLC Ladder Diagram
X0

Y0

X1
X2

Y1
X4

Y2

X3
X3

Row 1: Using a normally open (NO) switch X0 (“A” switch or “A" contact). When X0 is not pressed, the contact

DVP-PLC Application Manual

1-1

1 Basic Principles of PLC Ladder Diagram
will be open loop (Off), so Y0 will be Off. When X0 is pressed, the contact will be On, so Y0 will be On.
Row 2: Using a normally closed (NC) switch X1 (“B” switch or “B” contact). When X1 is not pressed, the contact
will be On, so Y1 will be On. When X1 is pressed, the contact will be open loop (Off), so Y1 will be Off.
Row 3: The combination logic of more than one input devices. Output Y2 will be On when X2 is not pressed or
X3 and X4 are pressed.
2.

Sequential Logic
Sequential logic is a circuit with "draw back” structure, i.e. the output result of the circuit will be drawn back as an
input criterion. Therefore, under the same input criteria, different previous status or action sequence will follow by
different output results.
Examples of traditional ladder diagram and PLC ladder diagram for sequential logic:
Traditional Ladder Diagram
X5

X6

PLC Ladder Diagram

Y3

X5

X6

Y3

Y3

Y3

When the circuit is first connected to the power, though X6 is On, X5 is Off, so Y3 will be Off. After X5 is pressed,
Y3 will be On. Once Y3 is On, even X5 is released (Off), Y3 can still keep its action because of the draw back (i.e.
the self-retained circuit). The actions are illustrated in the table below.
Device status
Action sequence
1

X5

X6

Y3

No action

No action

Off

2

Action

No action

On

3

No action

No action

On

4

No action

Action

Off

5

No action

No action

Off

From the table above, we can see that in different sequence, the same input status can result in different output
results. For example, switch X5 and X6 of action sequence 1 and 3 do not act, but Y3 is Off in sequence 1 and
On in sequence 3. Y3 output status will then be drawn back as input (the so-called “draw back”), making the
circuit being able to perform sequential control, which is the main feature of the ladder diagram circuit. Here we
only explain contact A, contact B and the output coil. Other devices are applicable to the same method. See
Chapter 3 “Basic instructions” for more details.

1.2

Differences Between Traditional Ladder Diagram and PLC Ladder Diagram
Though the principles of traditional ladder diagram and PLC ladder diagram are the same, in fact, PLC adopts

microcomputer to simulate the motions of the traditional ladder diagram, i.e. scan-check status of all the input devices
and output coil and calculate to generate the same output results as those from the traditional ladder diagram based
on the logics of the ladder diagram. Due to that there is only one microcomputer, we can only check the program of
the ladder diagram one by one and calculate the output results according to the program and the I/O status before the
cyclic process of sending the results to the output interface Æ re-reading of the input status Æ calculation Æ output.
The time spent in the cyclic process is called the “scan time” and the time can be longer with the expansion of the

1-2

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
program. The scan time can cause delay from the input detection to output response of the PLC. The longer the delay,
the bigger the error is to the control. The control may even be out of control. In this case, you have to choose a PLC
with faster scan speed. Therefore, the scan speed is an important specification requirement in a PLC. Owing to the
advancement in microcomputer and ASIC (IC for special purpose), there has been great improvement in the scan
speed of PLC nowadays. See the figure below for the scan of the PLC ladder diagram program.

Read input status from outside

X0

The output result is calculated
based on the ladder diagram.
(The result has not yet sent to the
external output point, but the
internal device will perform an
immediate output.)

X1

Start

Y0
Y0
M100 X3

X10

Executing in cycles

Y1
:
:
X100 M505
Y126
End

Send the result to the output point

Besides the difference in the scan time, PLC ladder and traditional ladder diagram also differ in “reverse current”.
For example, in the traditional ladder diagram illustrated below, when X0, X1, X4 and X6 are On and others are Off,
Y0 output on the circuit will be On as the dotted line goes. However, the PLC ladder diagram program is scanned from
up to down and left to right. Under the same input circumstances, the PLC ladder diagram editing tool WPLSoft will be
able to detect the errors occurring in the ladder diagram.
Reverse current of traditional ladder diagram
X0

X1

X2

X3 a

X4

X5

Y0

Reverse current of PLC ladder diagram
X1

X0

X2

Y0
Y0

b

X6

X4

X3 a

b X5

X6

Error detected in the third row

1.3

How to Edit Ladder Diagram
Ladder diagram is a diagram language frequently applied in automation. The ladder diagram is composed of the

symbols of electric control circuit. The completion of the ladder diagram by the ladder diagram editor is the completion
of the PLC program design. The control flow illustrated by diagram makes the flow more straightforward and

DVP-PLC Application Manual

1-3

1 Basic Principles of PLC Ladder Diagram
acceptable for the technicians of who are familiar with the electric control circuit. Many basic symbols and actions in
the ladder diagram come from the frequently-seen electromechanical devices, e.g. buttons, switches, relay, timer and
counter, etc. in the traditional power panel for automation control.
Internal devices in the PLC: The types and quantity of the devices in the PLC vary in different brand names.
Though the internal devices in the PLC adopts the names, e.g. transistor, coil, contact and so on, in the traditional
electric control circuit, these physical devices do not actually exist inside the PLC. There are only the corresponding
basic units (1 bit) inside the memory of the PLC. When the bit is “1”, the coil will be On, and when the bit is “0”, the coil
will be Off. The normally open contact (NO or contact A) directly reads the value of the corresponding bit. The
normally close contact (NC or contact B) reads the opposite state of the value of the corresponding bit. Many relays
will occupy many bits. 8 bits equal a “byte”. 2 bytes construct a “word” and 2 words combined is “double word”. Byte,
word or double words are used when many relays are processed (e.g. addition/subtraction, displacement) at the
same time. The other two devices, timer and counter, in the PLC have coil, timer value and counter value and they
have to process some values in byte, word or double word.
All kinds of internal devices in the value storage area in the PLC occupy their fixed amount of storage units.
When you use these devices, you are actually read the contents stored in the form of bit, byte or word.
Introductions on the basic internal devices in the PLC (See Ch 2. Functions of Devices in DVP-PLC for more details.)
Device

Functions
The input relay is an internal memory (storage) unit in the PLC corresponding to a external
input point and is used for connecting to the external input switches and receiving external
input signals. The input relay will be driven by the external input signals which make it “0” or
“1". Program designing cannot modify the status of the relay, i.e. it cannot re-write the basic
unit of a relay, nor can it force On/Off of the relay by HPP/WPLSoft.
SA/SX/SC/EH2/SV/EH3/SV2 series MPU can simulate input relay X and force On/Off of the

Input relay

relay. But the status of the external input points will be updated and disabled, i.e. the external
input signals will not be read into their corresponding memories inside PLC, but only the input
points on the MPU. The input points on the extension modules will still operate normally. There
are no limitations on the times of using contact A and contact B of the input relay. The input
relays without corresponding input signals can only be left unused and cannot be used for
other purposes.
&

Device indication: X0, X1,…X7, X10, X11,… are indicated as X and numbered in octal
form. The No. of input points are marked on MPU and extension modules.

The output relay is an internal memory (storage) unit in the PLC corresponding to a external
output point and is used for connecting to the external load. The output relay will be driven by
the contact of an input relay, contacts of other internal devices and the contacts on itself. A
Output relay

normally open contact of the output relay is connected to the external load. Same as the input
contacts, there are no limitations on the times of using other contacts of the output relay. The
output relay without corresponding output signals can only be left unused and can be used as
input relay if necessary.

1-4

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
Device

Functions
&

Device indication: Y0, Y1,…Y7, Y10, Y11,…are indicated as Y and numbered in octal
form. The No. of output points are marked on MPU and extension modules.

The internal relay does not have connection with the external. It is an auxiliary relay inside the
PLC with the functions same as those of the auxiliary (middle) relay in the electric control
circuit. Every internal relay corresponds to a basic internal storage unit and can be driven by
Internal relay

the contacts of the input relay, contacts of the output relay and the contacts of other internal
devices. There are no limitations on the times of using the contacts of the internal relay and
there will be no output from the internal relay, but from the output point.
&

Device indication: M0, M1,…, M4095 are indicated as M and numbered in decimal form.

DVP series PLC offers a step-type control program input method. STL instruction controls the
transfer of step S, which makes it easy for the writing of the control program. If you do not use
Step

any step program in the control program, step S can be used as a internal relay M as well as an
alarm point.
&

Device indication: S0, S1,…S1023 are indicated as S and numbered in decimal form.

The timer is used for timing and has coil, contact and register in it. When the coil is On and the
estimated time is reached, its contact will be enabled (contact A closed, contact B open). Every
timer has its fixed timing period (unit: 1ms/10ms/100ms). Once the coil is Off, the contact iwlwl
Timer

be disabled (contact A open, contact B closed) and the present value on the timer will become
“0”.
&

Device indication: T0, T1,…,T255 are indicated as T and numbered in decimal form.
Different No. refers to different timing period.

The counter is used for counting. Before using the counter, you have to give the counter a set
value (i.e. the number of pulses for counting). There are coil, contact and registers in the
Counter

counter. When the coil goes from Off to On, the counter will regard it as an input of 1 pulse and
the present value on the counter will plus “1”. We offer 16-bit and 32-bit high-speed counters
for our users.
&

Device indication: C0, C1,…,C255 are indicated as C and numbered in decimal form.

Data processing and value operations always occur when the PLC conducts all kinds of
sequential control, timing and counting. The data register is used for storing the values or all
Data register

kinds of parameters. Every register is able to store a word (16-bit binary value). Double words
will occupy 2 adjacent data registers.
&

Device indication: D0, D1,…,D11999 are indicated as D and numbered in decimal form.

The file register is used for storing the data or all kinds of parameters when the data registers
File register

required for processing the data and value operations are insufficient. Every file register is able
to store a 16-bit word. Double words will occupy 2 adjacent file registers. In SA/SX/SC series

DVP-PLC Application Manual

1-5

1 Basic Principles of PLC Ladder Diagram
Device

Functions
MPU, there are 1,600 file registers. In EH2/SV/EH3/SV2 series MPU, there are 10,000 file
registers. There is not an actual device No. for a file register. The reading and writing of file
registers should be executed by instructions API 148 MEMR, API 149 MEMW, or through the
peripheral device HPP02 and WPLSoft.
&

Device indication: K0 ~ K9,999, numbered in decimal form.

E and F index registers are 16-bit data registers as other data registers. They can be read and
Index register

written and can be used in word devices, bit devices or as a constant for index indication.
&

Device indication: E0 ~ E7, F0 ~ F7 are indicated as E and F and numbered in decimal
form.

The structure of a ladder diagram:
Structure

Explanation

Devices Used

Normally open, contact A

LD

X, Y, M, S, T, C

Normally closed, contact B

LDI

X, Y, M, S, T, C

AND

X, Y, M, S, T, C

ANI

X, Y, M, S, T, C

Normally open in parallel
connection

OR

X, Y, M, S, T, C

Normally closed in parallel
connection

ORI

X, Y, M, S, T, C

Rising-edge trigger switch

LDP

X, Y, M, S, T, C

Falling-edge trigger switch

LDF

X, Y, M, S, T, C

ANDP

X, Y, M, S, T, C

ANDF

X, Y, M, S, T, C

Rising-edge trigger in parallel
connection

ORP

X, Y, M, S, T, C

Falling-edge trigger in parallel
connection

ORF

X, Y, M, S, T, C

Block in series connection

ANB

-

Block in parallel connection

ORB

-

Normally open in series
connection
Normally closed in series
connection

Rising-edge trigger in series
connection
Falling-edge trigger in series
connection

1-6

Instruction

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
Structure

S

Explanation

Instruction

Devices Used

Multiple output

MPS
MRD
MPP

-

Coil driven output instruction

OUT

Y, M, S

Step ladder

STL

S

Application
instructions

See Ch.3 for basic instructions
(RST/SET and CNT/TMR) and Ch.5 ~
10 for application instructions

INV

-

Basic instruction
Application instruction
Inverse logic
Block:

A block is a series or parallel operation composed of more than 2 devices. There are series block and parallel block.

Series block

Parallel block

Separation line and combination line:
The vertical line is used for separating the devices. For the devices on the left, the vertical line is a combination line,
indicating that there are at least 2 rows of circuits on the left connected with the vertical line. For the devices on the
right, the vertical line is a separation line, indicating that there are at least 2 rows of circuits interconnected on the right
side of the vertical line).

1

2

Combination line for block 1
Separation line for block 2

Combination line for block 2

Network:
A complete block network is composed of devices and all kinds of blocks. The blocks or devices connectable by a
vertical line or continuous line belong to the same network.

DVP-PLC Application Manual

1-7

1 Basic Principles of PLC Ladder Diagram
Network 1

An independent network
Network 2

An incomplete network

1.4

How to Edit a PLC Ladder Diagram
The editing of the program should start from the left power line and ends at the right power line, a row after

another. The drawing of the right power line will be omitted if edited from WPLSoft. A row can have maximum 11
contacts on it. If 11 is not enough, you can continuously connect more devices and the continuous number will be
generated automatically. The same input points can be used repeatedly. See the figure below:
X0

X1

X2

X3

X4

X5

X6

X7

X10 C0

C1

00000

X11 X12 X13

Y0

00000
Continuous number

The operation of the ladder diagram program is scanning from top left to bottom right. The coil and the operation
frame of the application instruction belong to the output side in the program and are placed in the right if the ladder
diagram. Take the figure below for example, we will step by step explain the process of a ladder diagram. The
numbers in the black circles indicate the order.

X0

X1

Y1

X4
Y1

M0

T0

M3
TMR

X3

1-8

T0

K10

M1

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
The order of the instructions:
1
LD
X0
2
OR
M0
3
AND
X1
4
LD
X3
AND
M1
ORB
5
LD
Y1
AND
X4
6
LD
T0
AND
M3
ORB
7
ANB
8
OUT
Y1
TMR
T0

K10

Explanations on the basic structures in the ladder diagram:
1. LD (LDI) instruction: Given in the start of a block.
LD instruction

AND block

LD instruction

OR block

The structure of LDP and LDF instructions are the same as that of LD instruction, and the two only differ in their
actions. LDP and LDF instructions only act at the rising edge or falling edge when the contact is On, as shown in the
figure below.
Rising edge

Falling edge

X0

X0
Time
OFF

ON

OFF

Time
OFF

ON

OFF

2. AND (ANI) instruction: A single device connects to another single device or a block in series
AND instruction

AND instruction

The structure of ANDP and ANDF instructions are the same. ANDP and ANDF instructions only act at the rising
edge or falling edge.
3. OR (ORI) instruction: A single device connects to another single device or a block

DVP-PLC Application Manual

1-9

1 Basic Principles of PLC Ladder Diagram

OR instruction OR instruction

OR instruction

The structure of ORP and ORF instructions are the same. ORP and ORF instructions only act at the rising edge
or falling edge.
4. ANB instruction: A block connects to a device or another block in series
ANB instruction

5. ORB instruction: A block connects to a device or another block in parallel

ORB instruction

If the ANB and ORB operations are with several blocks, the operation should be performed from up to down or
left to right, combining into a block or network.
6. MPS, MRD, MPP instructions: Bifurcation point of multiple outputs, for generating many and diverse outputs.
MPS instruction is the start of the bifurcation point. The bifurcation point is the intersection of the horizontal line
and vertical line. We will have to determine whether to give a contact memory instruction by the contact status of the
same vertical line. Basically, every contact can be given a memory instruction, but considering the convenience of
operating the PLC and the limitation on its capacity, some parts in the ladder diagram will be omitted during the
conversion. We can determine the type of contact memory instruction by the structure of the ladder diagram. MPS is
recognized as “┬” and the instruction can be given continuously for 8 times.
MRD instruction is used for reading the memory of the bifurcation point. Due to that the same vertical line is of
the same logic status, in order to continue analyzing other ladder diagrams, we have to read the status of the original
contact again. MRD is recognized as “├”.
MPP instruction is used for reading the start status of the top bifurcation point and popping it out from the stack.
Since MPP is the last item on the vertical line, the vertical line ends at this point.

1-10

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
MPS

MPP is recognized as “└”. Using the method
given above for the analysis cannot be wrong.

MPS

However, sometimes the compiling program will ignore
the same output status, as shown in the figure.
MRD

MPP

MPP

7. STL instruction: Used for designing the syntax of the sequential function chart (SFC).
STL instruction allows the program designer a clearer and readable picture of the sequence of the program as
when they draw a sequence chart. From the figure below, we can see clearly the sequence to be planned. When the
step S moves to the next step, the original S will be “Off". Such a sequence can then be converted into a PLC ladder
diagram and called “step ladder diagram”.
M1002

M1002

SET

S0

S0
S

SET

S21

S21
S

SET

S22

S22
S

S0
RET

8. RET instruction: Placed after the completed step ladder diagram.
RET also has be placed after STL instruction. See the example below.
S20
S

X1

RET
S20
S

X1

RET

See step ladder instructions [STL], [RET] in Ch. 4 for the structure of the ladder diagram.

DVP-PLC Application Manual

1-11

1 Basic Principles of PLC Ladder Diagram
1.5

The Conversion of PLC Command and Each Diagram Structure

Ladder Diagram

X0

X2

X1

M0

X1
Y0
C0
SET

S0

M1
M2

S0
S

Y0

X10
Y10
SET

S10
S

S11
S

X11
Y11
SET

S11

SET

S12

SET

S13

X12
Y12
SET

S20
S

S10

S12
S

S13
S

S20

X13
S0
RET

X0
CNT
C0

C0

X1
M0
X1
M1
M2
M2
RST
END

C0

K10

LD
OR
LD
OR
ORI
ANB
LD
AND
ORB
AN I
OUT
AND
SET
STL
LD
OUT
SET
STL
LD
OUT
SET
SET
SET
STL
LD
OUT
SET
STL
STL
STL
LD
OUT
RET
LD
CNT
LD
MPS
AND
OUT
MRD
AN I
OUT
MPP
AN I
OUT
RST
END

X0
X1
X2
M0
M1
M2
Y0

OR
block
OR
block
Series
connection blcok

AND
block
Parallel
connection block

ANI
X1
The output will continue
Y0
following the status of
Multiple
C0
outputs
S0
Step ladder Start
S0
X10 Status S0 and X10 operation
Status working item and
Y10
step point transfer
S10
Withdraw S10 status
S10
Withdraw X11 status
X11
Y11
S11
Status working item and
step point transfer
S12
S13
Withdraw S11 status
S11
Withdraw X12 status
X12
Y12 Status working item and
S20 step point transfer
S20
Bifurcation
S12
convergence
S13
End of step ladder
X13
Status working item
and
step
point
transfer
S0
Return

X0
C0 K10
C0

Read C0

X1
M0
X1
M1

Multiple
outputs

M2
M2
C0
End of program

ƒ Fuzzy Syntax
The correct ladder diagram analysis and combination should be conducted from up to down and left to right.
However, without adopting this principle, some instructions can make the same ladder diagram.

1-12

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
Example Program 1
See the ladder diagram below. There are 2 ways to indicate the ladder by instruction programs with the same result.
X0

X2

X4

X1

X3

X5

Ideal way
LD
OR
LD
OR
ANB
LD
OR
ANB

X0
X1
X2
X3
X4
X5

Less ideal way
LD
OR
LD
OR
LD
OR
ANB
ANB

X0
X1
X2
X3
X4
X5

The two instruction programs will be converted into the same ladder diagram. The difference between the ideal
one and less ideal one is the operation done by the MPU. For the ideal way, the combination is done block by block
whereas the less idea way combines all the blocks combine with one another in the last step. Though the length of
the program codes of the two ways are equal, the combination done in the last step (by ANB instruction, but ANB
cannot be used continuously for more than 8 times) will have to store up the previous calculation results in advance.
In our case, there are only two blocks combined and the MPU allows such kind of combination. However, once the
number of blocks exceed the range that the MPU allows, problems will occur. Therefore, the best way is to execute
the block combination instruction after a block is made, which will also make the logic sequence planned by the
programmer more in order.
Example Program 2
See the ladder diagram below. There are 2 ways to indicate the ladder by instruction programs with the same result.
Ideal way
X0
X1
X2

Less ideal way

LD

X0

LD

X0

OR

X1

LD

X1

OR

X2

LD

X2

OR

X3

LD

X3

X3

ORB
ORB
ORB

In this example, the program codes and the operation memory in the MPU increase in the less ideal way.
Therefore, it is better that you edit the program following the defined sequence.
ƒ Incorrect Ladder Diagram
PLC processes the diagram program from up to down and left to right. Though we can use all kinds of ladder
symbols to combine into various ladder diagrams, when we draw a ladder diagram, we will have to start the diagram
from the left power line and end it at the right power line (In WPLSoft ladder diagram editing area, the right power line
is omitted), from left to right horizontally, one row after another from up to down. See bellows for the frequently seen
incorrect diagrams:

DVP-PLC Application Manual

1-13

1 Basic Principles of PLC Ladder Diagram

OR operation upward is not allowed.

“Reverse flow” exists in the signal circuit from the
beginning of input to output.
Re ver se fl ow

The up-right corner should output first.

Combining or editing should be done from the
up-left to the bottom-right. The dotted-lined area
should be moved up.

Parallel operation with empty device is not allowed.

Empty device cannot do operations with other
devices.

No device in the middle block.

Devices and blocks in series should be horizontally
aligned.

Label P0 should be in the first row of a complete
network.

Blocks connected in series should be aligned with
the upmost horizontal line.

1-14

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
1.6

Simplified Ladder Diagram

„ When a series block is connected to a parallel block in series, place the block in the front to omit ANB instruction.
X0

Ladder diagram complied into instruction

X1
X2

Ø
X1

LD

X0

LD

X1

OR

X2

ANB
Ladder diagram complied into instruction

X0

X2

LD

X1

OR

X2

AND

X0

„ When a single device is connected to a block in parallel, place the block on top to omit ORB instruction.
Ladder diagram complied into instruction

T0
X1

X2

T0

LD

X1

AND

X2

ORB

Ø

X1

LD

X2

Ladder diagram complied into instruction

T0

LD

X1

AND

X2

OR

T0

„ In diagram (a), the block on top is shorter than the block in the bottom, we can switch the position of the two
blocks to achieve the same logic. Due to that diagram (a) is illegal, there is a “reverse flow” in it.
Ladder diagram complied into instruction

X0
X1

X2

X3

X4

(a)
Ø

LD

X0

OR

X1

AND

X2

LD

X3

AND

X4

ORB
Ladder diagram complied into instruction

X3

X4

LD

X3

X1

X2

AND

X4

LD

X1

OR

X0

AND

X2

X0

(b)

ORB

DVP-PLC Application Manual

1-15

1 Basic Principles of PLC Ladder Diagram
„ MPS and MPP instruction can be omitted when the multiple outputs in the same horizontal line do not need to
operate with other input devices.
Ladder diagram complied into instruction

X0

MPS

Y1
Y0

AND

X0

OUT

Y1

MPP

Ø

OUT

Y0

Ladder diagram complied into instruction

Y0
X0
Y1

OUT

Y0

AND

X0

OUT

Y1

„ Correct the circuit of reverse flow
In the following two examples, the diagram in the left hand side is the ladder diagram we desire. However, the illegal
“reverse flow” in it is incorrect according to our definition on the ladder diagram. We modify the diagram into the
diagram in the right hand side.
Example 1

X0

X1

X2

X3

X4

X5

X0

X1

X2

X3

X4

X5

X10

Ö
X6

X7

X1 0

LO OP 1

X6

X7

X5

re ver se fl ow

X10

LOOP1

Example 2
X0

X1

X2

X3

X4

X5

X6

X7

X1 0

X0

X1

X2

X3

X4

X5

X7

X10

LO OP 1

X6
re ver se fl ow

Ö

Re ver se fl ow

X3
X6

X0

X1

X2

X3

X4

X5

X6

X7

X 10

LOOP1
X0

X1

X4

X7

X10
LOOP 2

L OO P2

1-16

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
1.7

Basic Program Designing Examples

„ Start, Stop and Latched
In some application occasions, we need to use the transient close/open buttons for the start and stop of an equipment.
To maintain its continuous action, you have to design latched circuits.
Example 1: Stop first latched circuit
When the normally open contact X1 = On and the
normally closed contact X2 = Off, Y1 will be On. If you make
X2 = On at this time, Y1 will be Off. It is the reason why this is

Y1

X2
Y1

X1

called “stop first”.
Example 2: Start first latched circuit
When the normally open contact X1 = On and the

X1

X2
Y1

normally closed contact X2 = Off, Y1 will be On and latched. If
you make X2 = On at this time, Y1 will continue to be On

Y1

because of the latched contact. It is the reason why this is
called “start first”.
Example 3: Latched circuit for SET and RST instructions
See the diagram in the right hand side for the latched
circuit consist of RST and SET instructions.
In the stop first diagram, RST is placed after SET. PLC

Stop first
X1
SET

Y1

RST

Y1

RST

Y1

SET

Y1

SET

M512

RST

M512

X2

executes the program from up to down, so the On/Off of Y1 will
be determined upon its status in the end of the program.
Therefore, when X1 and X2 are enabled at the same time, Y1
will be Off. It is the reason why this is called “stop first”.
In the start first diagram, SET is placed after RST. When

Start first
X2
X1

X1 and X2 are enabled at the same time, Y1 will be On. It is
the reason why this is called “start first”.
Example 4: Power shutdown latched
The auxiliary relay M512 is latched (see instruction
sheets for DVP series PLC MPU). The circuit can not only be

X1
X2

latched when the power is on, but also keep the continuity of
the original control when the power is shut down and switched

M512
Y1

on again.

DVP-PLC Application Manual

1-17

1 Basic Principles of PLC Ladder Diagram
„ Frequently Used Control Circuit
Example 5: Conditional control
X1

X1

X3
Y1

Y1

X3
X2

X2

X4

Y1
Y2

Y2

X4
Y1
Y2

X1 and X3 enables and disables Y1; X2 and X4 enables and disables Y2, and all are latched. Due to that the
normally open contact of Y1 is connected to the circuit of Y2 in series, Y1 becomes an AND condition for Y2.
Therefore, only when Y1 is enabled can Y2 be enabled.
Example 6: Interlock control
X1

X3

Y2
Y1

Y1

X1
X3
X2

X2

X4

X4

Y1
Y2

Y2

Y1
Y2

Which of the X1 and X2 is first enabled decides either the corresponding output Y1 or Y2 will be enabled first.
Either Y1 or Y2 will be enabled at a time, i.e. Y1 and Y2 will not be enabled at the same time (the interlock). Even X1
and X2 are enabled at the same time, Y1 and Y2 will not be enabled at the same time due to that the ladder diagram
program is scanned from up to down. In this ladder diagram, Y1 will be enabled first.
Example 7: Sequential control
X1

X3

If we serially connect the normally closed contact

Y2
Y1

Y1
X2

condition for Y1 (as the diagram in the left hand side),
X4

Y1
Y2

Y2

of Y2 in example 5 to the circuit of Y1 as an AND
the circuit can not only make Y1 as the condition for Y2,
but also allow the stop of Y1 after Y2 is enabled.
Therefore, we can make Y1 and Y2 execute exactly the
sequential control.

1-18

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
Example 8: Oscillating circuit
An oscillating circuit with cycle ΔT+ΔT
Y1

Y1

Y1

T

T

The ladder diagram above is a very simple one. When the program starts to scan the normally closed contact
Y1, Y1 will be closed because coil Y1 is Off. When the program then scan to coil Y1 and make it On, the output will be
1. When the program scans to the normally closed contact Y1 again in the next scan cycle, because coil Y1 is On, Y1
will be open and make coil Y1 Off and output 0. The repeated scans will result in coil Y1 outputs oscillating pulses by
the cycle ΔT(On)+ΔT(Off).
An oscillating circuit with cycle nT+ΔT
X0

X0

Y1
TMR

T0

Kn

T0

Y1

Y1

nT

T

The ladder diagram program controls the On time of coil Y1 by timer T0 and disable timer T0 in the next scan
cycle, resulting in the oscillating pulses in the output of Y1. n refers to the decimal set value in the timer and T is the
cycle of the clock.
Example 9: Flashing circuit
X0

T2
TMR

T1

Kn1

TMR

T2

Kn2

X0
n2 *T

T1
X0

Y1

T1
Y1

n1 * T

The ladder diagram is an oscillating circuit which makes the indicator flash or enables the buzzer alarms. It
uses two timer to control the On/Off time of coil Y1. n1 and n2 refer to the set values in T1 and T2 and T is the cycle
of the clock.
Example 10: Trigger circuit
X0
M0
M0

Y1

T

Y1
M0

X0

M0

Y1
Y1

DVP-PLC Application Manual

1-19

1 Basic Principles of PLC Ladder Diagram
The rising-edge differential instruction of X0 makes coil M0 generate a single pulse of ΔT (one scan cycle).
Coil Y1 will be On during this scan period. In the next scan period, coil M0 will be Off and the normally closed contact
M0 and Y1 will all be closed, making coil Y1 continue to be On until another rising-edge arrives in input X0, making
coil M0 On for another scan period and Y1 Off. Such kind of circuit relies on an input to make two actions execute
interchangeably. Also from the timing diagram on the last page, we can see that input X0 are square pulse signals of
the cycle T and coil Y1 output are square pulse signals of the cycle 2T.
Example 11: Delay circuit

X0
TMR

T10

K1000

T10

X0
Y1

Y1

100 seconds

Time base: T = 0.1 sec

When input X0 is On, due to that its corresponding normally closed contact is Off, time T10 will be Off and the
output coil Y1 will be On. T10 will be On and start to count until input X0 is Off. Output coil Y1 will be delayed for
100 seconds (K1,000 × 0.1 sec = 100 secs) and be Off. See the timing diagram above.
Example 12: Output delay circuit
The output delay circuit is the circuit composed of two timers. When input X0 is On and Off, output Y4 will be
delayed.
X0
TMR
T5

T5

K50
5 secs

T6
Y4

T5

Y4
Y4

X0
TMR

T6

K30

T
T6
3 secs

Example13: Timing extension circuit
X0
TMR

T11

Kn1

TMR

T12

Kn2

T11
T12
Y1

The total delay time from input X0 is closed to output
Y1 is On = (n1+n2)* T. T refers to the clock cycle.

X0
n1* T
T11
n2* T

Timer = T11, T12
Clock cycle: T

T12
Y1
(n1+n2)* T

1-20

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
Example 14: How to enlarge the counting range
X13

The counting range of a 16-bit counter is 0 ~ 32,767. As
CNT

C5

Kn1

CNT

C6

Kn2

RST

C5

RST

C6

the circuit in the left hand side, using two counters can

C5

increase the counting range to n1*n2. When the counting
of counter C5 reaches n1, C6 will start to count for one
time and reset for counting the pulses from X13. When

X14

the counting of counter C6 reaches n2, the pulses from

C6

input X13 will be n1*n2.

Y1

Example 15: Traffic light control (by using step ladder instruction)
Traffic light control

Vertical
Light
Vertical
light
Horizontal
light

Horizontal
Light

On time

Red light

Yellow
light

Green
light

Green
light
flashes

Y0

Y1

Y2

Y2

Y10

Y11

Y12

Y12

35 secs

5 secs

25 secs

5 secs

Timing Diagram:
Vertical
Light
Red Y0
Yellow Y1
25 secs

Green Y2

5 secs

Horizontal
Light

5 secs

Red Y10

Yellow Y11
Green Y12

25 secs
5 secs

DVP-PLC Application Manual

5 secs

1-21

1 Basic Principles of PLC Ladder Diagram
SFC Figure:

Ladder Diagram:
M1002

M1002

ZRST

S0

SET

S0

SET

S20

SET

S30

S127

S0

S20

Y0
TMR

T0
S21
T1
S22

S23

T0

K350

Y2

T10
S31

TMR

T1

K250

TMR

T2

K50

M1013

T2

S30

Y2
Y1

TMR

T10

K250

TMR

T11

K50

M1013

T11
S32
T12

S0
S

Y12

Y12

S20
S

Y0

Y11
TMR

T12

K50

S21
S

Y10

S33
TMR

T13

TMR

T0

SET

S21

K350

T0

Y2

K350

T13

TMR

T1

SET

S22

TMR

T2

K250

T1
S0

S22
S

K50

M1013

Y2
T2

SET
S23
S

Y1

S30
S

Y12

S23

TMR

T10

SET

S31

TMR

T11

K250

T10
S31
S

K50

M1013

Y12
T11

SET
S32
S

S32

Y11
TMR

T12

SET

S33

K50

T12
S33
S

Y10
TMR

S23 S33
S
S

T13

T13

K350

S0
RET
END

1-22

DVP-PLC Application Manual

1 Basic Principles of PLC Ladder Diagram
„ Drawing by SFC Editor (WPLSoft )
Drawn by SFC

Internal Ladder Diagram
„ LAD-0

M1002

LAD-0

ZRST

S0

SET

S0

S127

S0
„ Transferring Condition 1
0

T0
TRANS*

S20

S30

1

5

S21

S31

2

6

S22

S32

3

7

S23

S33

„ S22

TMR

T2

K50

M1013
Y2

„ Transferring Condition 4

T13
TRANS*
4

S0
„ Transferring Condition 7

T12
TRANS*

DVP-PLC Application Manual

1-23

1 Basic Principles of PLC Ladder Diagram
MEMO

1-24

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
2.1

All Devices in DVP-PLC

ES/EX/SS series MPU:
Type

Item

Device

X

External input relay

X0 ~ X177, 128 points, octal

Y

External output relay

Y0 ~ Y177, 128 points, octal

General purpose

Relay (bit)

M

T

C

S

Auxiliary
Latched*
relay

Timer

Register (word data)
Pointer

M512 ~ M767, 256 points
M1000 ~ M1279, 280 points
(some are latched)

100ms timer

T0 ~ T63, 64 points

10ms timer (M1028 = On)

T64 ~ T126, 63 points (M1028
= Off: 100ms)

1ms timer

T127, 1 points

16-bit counting up
(general purpose)
16-bit counting up (latched*)
32-bit
1-phase 1 input
Counter counting
up/down
1-phase 2 inputs
high-speed
counter
2-phase 2 inputs
(latched*)
Initial step (latched*)
Step

M0 ~ M511, M768 ~ M999, 744
points

Special purpose

Zero return (latched*)
Latched*

C0 ~ C111, 112 points
C112 ~ C127, 16 points
C235 ~ C238, C241, C242,
C244, 7 points
C246, C247, C249, 3 points

Total
256 points

Total
128 points

Total
128 points

Total
13 points

Timer indicated by TMR
instruction. If timing
reaches its target, the T
contact of the same No.
will be On.

Counter indicated by
CNT (DCNT) instruction.
If counting reaches its
target, the C contact of
the same No. will be On.

C251, C252, C254, 3 points
S0 ~ S9, 10 points
Total
S10 ~ S19, 10 points (used with
128 points
IST instruction)
S20 ~ S127, 108 points

Present value of timer

T0 ~ T127, 128 points

C

Present value of counter

C0 ~ C127, 16-bit counter, 128 points
C235 ~ C254, 32-bit counter, 13 points

D

Data
register

General purpose

D0 ~ D407, 408 points

Latched*
Special purpose
Index indication

D408 ~ D599, 192 points
D1000 ~ D1311, 312 points
E, F, 2 points

N

For master control nested loop

N0 ~ N7, 8 points

P

For CJ, CALL instructions

P0 ~ P63, 64 points

Interruption

Function
Corresponds to external
input points
Corresponds to external
output points

Total
The contact can be
1,280 points On/Off in the program.

T

I

Total
600 points
Total
312 points

Used for SFC.
When the timing
reaches the target, the
contact of the timer will
be On.
When the counting
reaches the target, the
contact of the counter
will be On.
Memory area for data
storage; E, F can be
used for index
indication.
Control point for main
control loop
Position index for CJ
and CALL

External interruption

I001, I101, I201, I301, 4 points

Timed interruption

I6□□, 1 point (□□=10 ~ 99, time base = Position index for
interruption subroutine.
1ms ) (for V5.7 and versions above)

Communication interruption
Constant

Range

K

Decimal form

H

Hexadecimal form

I150, 1 point
K-32,768 ~ K32,767 (16-bit operation)
K-2,147,483,648 ~ K2,147,483,647 (32-bit operation)
H0000 ~ HFFFF (16-bit operation)
H00000000 ~ HFFFFFFFF (32-bit operation)

* The latched area is fixed and cannot be changed.

DVP-PLC Application Manual

2-1

2 Functions of Devices in DVP-PLC
SA/SX/SC series MPU:
Type

Item

Device

X

External input relay

X0 ~ X177, 128 points, octal

Y

External output relay

Y0 ~ Y177, 128 points, octal

General purpose
M

Auxiliary
Relay

Latched*
Special purpose

100ms
T

Timer
10ms

Relay (bit)

1ms
16-bit counting up
32-bit counting up/down

C

Counter

For SA/SX, 32-bit
high-speed counter

For SC, 32-bit high-speed
counter

Initial step
Zero return

Register (word data)

S

Step point General purpose

T246 ~ T249, 4 accumulative points
(*4)
C0 ~ C95, 96 points (*1)
C96 ~ C199, 104 points (*3)
C200 ~ C215, 16 points (*1)
C216 ~ C234, 19 points (*3)
C235 ~ C244, 1-phase 1 input, 9
points (*3)
C246 ~ C249, 1-phase 2 inputs, 3
points (*3)
C251 ~ C254, 2-phase 2 inputs, 4
points (*3)
C235 ~ C245, 1-phase 1 input, 11
points (*3)
C246 ~ C250, 1-phase 2 inputs, 4
points (*3)
C251 ~ C255, 2-phase 2 inputs, 4
points (*3)
S0 ~ S9, 10 points (*1)
S10 ~ S19, 10 points (used with IST
instruction) (*1)
S20 ~ S511, 492 points (*1)
S512 ~ S895, 384 points (*3)
S896 ~ S1023, 128 points (*3)

C

Present value of counter
General purpose

D

T200 ~ T239, 40 points (*1)
T240 ~ T245, 6 accumulative points
(*4)

Latched*

Present value of timer

Data
register

M0 ~ M511, 512 points (*1)
M512 ~ M999, 488 points (*3)
M2000 ~ M4095, 2,096 points (*3)
M1000 ~ M1999, 1,000 points
(some are latched)
T0 ~ T199, 200 points (*1)
T192 ~ T199 for subroutine
T250 ~ T255, 6 accumulative points
(*4)

Alarm
T

N/A

2-2

Range

Latched*
Special purpose
Index indication

File register

Function
Total
256
points

Corresponds to external
input points
Corresponds to external
output points

Total
4,096
points

The contact can be
On/Off in the program.

Total
256
points

Timer indicated by TMR
instruction. If timing
reaches its target, the T
contact of the same No.
will be On.

Total
235
points
Total
16
points

Counter indicated by
CNT (DCNT) instruction.
If counting reaches its
target, the C contact of
the same No. will be On.

Total
19
points

Total
1,024
points

Used for SFC.

When the timing
reaches the target, the
T0 ~ T255, 256 points
contact of the timer will
be On.
When the counting
C0 ~ C199, 16-bit counter, 200 points
reaches the target, the
C200 ~ C254, 32-bit counter, 50 points (SC: 53
contact of the counter
points)
will be On.
D0 ~ D199, 200 points (*1)
D200 ~ D999, 800 points (*3)
D2000 ~ D4999, 3,000 points (*3)
D1000 ~ D1999, 1,000 points
E0 ~ E3, F0 ~ F3, 8 points (*1)
K0 ~ K1,599 (1,600 points) (*4)

Total
5,000
points

Memory area for data
storage; E, F can be
used for index
indication.
Expanded register for
data storage.

DVP-PLC Application Manual

Pointer

2 Functions of Devices in DVP-PLC
N

For Master control loop

N0 ~ N7, 8 points

P

For CJ, CALL instructions

P0 ~ P255, 256 points

External interruption

I001, I101, I201, I301, I401, I501, total 6 points
I6□□, I7□□, 2 points (□□ = 1 ~ 99, time
base = 1ms)

Timed interruption
I

Control point for main
control loop
Position index for CJ
and CALL

Position index for
interruption subroutine.

Interruption Interruption inserted when

I010, I020, I030, I040, I050, I060, total 6 points

high-speed counter
reaches target
Constant

Communication interruption I150, 1 point
K-32,768 ~ K32,767 (16-bit operation)
K
Decimal form
K-2,147,483,648 ~ K2,147,483,647 (32-bit operation)
H0000 ~ HFFFF (16-bit operation)
H Hexadecimal form
H00000000 ~ HFFFFFFFF (32-bit operation)
*1. Non-latched area cannot be modified.
*2. The preset non-latched area can be modified into latched area by setting up parameters.
*3. The preset latched area can be modified into non-latched area by setting up parameters.
*4. The fixed latched area cannot be modified

Latched settings for all devices in SA/SX/SC series MPU:
General purpose

Latched

Special auxiliary relay

Latched

M0 ~ M511

M512 ~ M999

M1000 ~ M1999

M2000 ~ M4095

M
(Auxiliary relay)

T
(Timer)

Default: latched

Default: latched
Some are latched and
cannot be modified

It is fixed to be non-latched

Start: D1200 (K512)
End: D1201 (K999)

100 ms

10 ms

10 ms

1 ms

100 ms

T0 ~ T199

T200 ~ T239

T240 ~ T245

T246 ~ T249

T250 ~ T255

Accumulative type
It is fixed to be latched

It is fixed to be non-latched It is fixed to be non-latched
16-bit counting up
C
(Counter)

S
(Step relay)

D
(Register)

C0 ~ C95

Default: latched

It is fixed to be
non-latched
Initial
S0 ~ S9

Start: D1208 (K96)
End: D1209 (K199)
Zero return
S10 ~ S19

C216 ~ C234

32-bit high-speed counting
up/down
C235 ~ C255

Default: latched

Default: latched

Start: D1210 (K216)
End: D1211 (K234)

Start: D1212 (K235)
End: D1213 (K255)

32-bit counting up/down

C96 ~ C199

C200 ~ C215
It is fixed to be
non-latched

General purpose
S20 ~ S511

Start: D1202 (K2,000)
End: D1203 (K4,095)

Latched
S512 ~ S895

Alarm step
S896 ~ S1023

Default: latched
It is fixed to be non-latched

Start: D1214 (K512)
End: D1215 (K895)

General purpose
D0 ~ D199

Latched
D200 ~ D999
Default: latched

It is fixed to be non-latched

Start: D1216 (K200)
End: D1217 (K999)

File Register

DVP-PLC Application Manual

Special register
D1000 ~ D1999
Some are latched and
cannot be modified.

It is fixed to be latched
Latched
D2000 ~ D4999
Default: latched
Start: D1218 (K2,000)
End: D1219 (K4,999)

K0 ~ K1599
It is fixed to be latched.

2-3

2 Functions of Devices in DVP-PLC
EH2/SV series MPU:
Type

Item

Device

X

External input relay

X0 ~ X377, 256 points, octal

Y

External output relay

Y0 ~ Y377, 256 points, octal

M

Auxiliary
relay

General purpose
Latched
Special purpose
100ms
T

Timer

C

Counter

S

Step

T0 ~ T199, 200 points (*2)
T192 ~ T199 is for subroutine
T250~T255, 6 accumulative points (*4)

T200 ~ T239, 40 points (*2)
T240 ~ T245, 6 accumulative points (*4)
1ms
T246 ~ T249, 4 accumulative points (*4)
16-bit counting
C0 ~ C99, 100 points (*2)
C100 ~ C199, 100 points (*3)
up
32-bit counting
C200 ~ C219, 20 points (*2)
C220 ~ C234, 15 points (*3)
up/down
C235 ~ C244, 1-phase 1 input, 10 points (*3)
32-bit high-speed
C246 ~ C249, 1-phase 2 inputs, 4 points(*3)
counter
C251 ~ C254, 2-phases 2 inputs, 4 points (*3)
Initial step point S0 ~ S9, 10 points (*2)
S10 ~ S19, 10 points (used with IST instruction)
Zero return
(*2)
General purpose S20 ~ S499, 480 points (*2)
Latched

S500 ~ S899, 400 points (*3)

Alarm

S900 ~ S1023, 124 points (*3)

T

Present value of timer

T0 ~ T255, 256 points

C

Present value of counter

C0 ~ C199, 16-bit counter, 200 points
C200 ~ C254, 32-bit counter, 53 points

General purpose
D

N/A

Data
register

Latched
Special purpose
Index indication

Function
Corresponds to external
Total
input points
512
Corresponds to external
points
output points

M0 ~ M499, 500 points (*2)
Total
The contact can be
M500 ~ M999, 500 points (*3)
4,096
On/Off in the program.
M2000 ~ M4095, 2,096 points (*3)
points
M1000 ~ M1999, 1,000 points (some are latched)

10ms

Relay (bit)
Register (word data)

Range

D0 ~ D199, 200 points, (*2)
D200 ~ D999, 800 points (*3)
D2000 ~ D9999, 8,000 points (*3)
D1000 ~ D1999, 1,000 points
E0 ~ E7, F0 ~ F7, 16 points (*1)

File register

K0 ~ K9,999 (10,000 points) (*4)

N

For master control loop

N0 ~ N7, 8 points

P

For CJ, CALL instructions

P0~P255, 256 points

Timer indicated by TMR
Total instruction. If timing
256 reaches its target, the T
points contact of the same No.
will be On.
Counter indicated by
CNT (DCNT)
Total
instruction. If counting
253
reaches its target, the C
points
contact of the same No.
will be On.

Total
1,024 Used for SFC.
points

When the timing
reaches the target, the
contact of the timer will
be On.
When the counting
reaches the target, the
contact of the counter
will be On.
Memory area for data
Total
storage; E, F can be
10,000
used for index
points
indication.
Expanded register for
data storage.
Control point for main
control loop
Position index for CJ
and CALL

I00□(X0), I10□(X1), I20□(X2), I30□(X3), I40□(X4),

2-4

External interruption

I50□(X5), 6 points (□ = 1, rising-edge trigger
0, falling-edge trigger

Interruption

Pointer

I

Timed interruption
Interruption inserted
when high-speed
counter reaches target

, □ =

)

I6□□, I7□□, 2 points(□□ = 1~99ms) time base = 1ms
I8□□, 1 point (□□ = 1~99, time base = 0.1ms)
Position index for
interruption subroutine.
I010, I020, I030, I040, I050, I060, 6 points

Pulse interruption

I110, I120, I130, I140, 4 points

Communication
interrruption

I150, I160, I170, 3 points

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Type

Item

Device

Range

Constant

Frequency
measurement card
interruption

Function

I180, 1 point

K

Decimal form

K-32,768 ~ K32,767 (16-bit operation)
K-2,147,483,648 ~ K2,147,483,647 (32-bit operation)

H

Hexadecimal form

H0000 ~ HFFFF (16-bit operation)
H00000000 ~ HFFFFFFFF (32-bit operation)

*1. Non-latched area cannot be modified.
*2. The preset non-latched area can be modified into latched area by setting up parameters.
*3. The preset latched area can be modified into non-latched area by setting up parameters.
*4. The fixed latched area cannot be modified

Latched settings for all devices in EH2/SV series MPU:
General purpose

Latched

Special auxiliary relay

Latched

M0 ~ M499

M500 ~ M999

M1000 ~ M1999

M2000 ~ M4095

M
(Auxiliary relay)

T
(Timer)

C
(Counter)

S
(Step relay)

D
(Register)

Start: D1200 (K500)
End: D1201 (K999)

Some are latched and
Start: D1202 (K2,000)
End: D1203 (K4,095)
cannot be modified.
10 ms
1 ms
100 ms
T240 ~ T245
T246 ~ T249
T250 ~ T255

100 ms
10 ms
T0 ~ T199
T200 ~ T239
Default: non-latched
Default: non-latched
Accumulative type
Start: D1204 (K-1)*1
Start: D1206 (K-1)*1
It is fixed to be latched.
End: D1205 (K-1)*1
End: D1207 (K-1)*1
16-bit counting up
32-bit counting up/down
32-bit high-speed counting up/down
C0 ~ C99
C100 ~ C199
C200 ~ C219
C220 ~ C234
C235 ~ C245
C246 ~ C255
Default:
Default:
Default: latched
Default: latched
Default: latched
non-latched
non-latched
Start: D1208 (K100)
Start: D1210 (K220)
Start: D1212 (K235)
End: D1209 (K199)
End: D1211 (K234)
End: D1213 (K255)
General
Initial
Zero return
Latched
Step alarm
purpose
S0 ~ S9
S10 ~ S19
S20 ~ S499
S500 ~ S899
S900 ~ S1023
Non-latched (default)
Latched (default)
It is fixed to be latched.
Start: D1214 (K500)
End: D1215 (K899)
General purpose

Latched

Special register

Latched

D0 ~ D199

D200 ~ D999

D1000 ~ D1999

D2000 ~ D9999

Default: non-latched

Default: latched

Some is latched and
cannot be modified.

Start: D1216 (K200)
End: D1217 (K999)

Default: latched
Start: D1218 (K2,000)
End: D1219 (K9,999)

K0 ~ K9,999
It is fixed to be latched.

File register
*1: K-1 refers to the default setting is non-latched.

EH3/SV2 series MPU:

Relay (bit)

Type

Item

Device

Range

X

External input relay

X0 ~ X377, 256 points, octal

Y

External output relay

Y0 ~ Y377, 256 points, octal

General
purpose
M

Auxiliary
relay

Latched
Special
purpose

DVP-PLC Application Manual

M0 ~ M499, 500 points (*2)
M500 ~ M999, 500 points (*3)
M2000 ~ M4095, 2,096 points (*3)
M1000 ~ M1999, 1,000 points (some are
latched)

Function
Total
512
points

Corresponds to external
input points
Corresponds to external
output points

Total
4,096
points

The contact can be
On/Off in the program.

2-5

2 Functions of Devices in DVP-PLC
Type

Item

Device

100ms
T

C

Timer

10ms

Counter

T

Register (word data)

C

Step

T246 ~ T249, 4 accumulative points (*4)
C0 ~ C99, 100 points (*2)
C100 ~ C199, 100 points (*3)
C200 ~ C219, 20 points (*2)
C220 ~ C234, 15 points (*3)
C235 ~ C244, 1-phase 1 input, 10 points (*3)
C246 ~ C249, 1-phase 2 inputs, 4 points(*3)
C251 ~ C254, 2-phases 2 inputs, 4 points (*3)

Total
256
points

Timer indicated by TMR
instruction. If timing
reaches its target, the T
contact of the same No.
will be On.

Total
253
points

Counter indicated by
CNT (DCNT) instruction.
If counting reaches its
target, the C contact of
the same No. will be On.

Total
1,024
points

Used for SFC.

S0 ~ S9, 10 points (*2)
S10 ~ S19, 10 points (used with IST
instruction) (*2)

General
purpose
Latched

S500 ~ S899, 400 points (*3)

Alarm

S900 ~ S1023, 124 points (*3)

S20 ~ S499, 480 points (*2)

Present value of timer

T0 ~ T255, 256 points

When the timing reaches
the target, the contact of
the timer will be On.

Present value of counter

C0 ~ C199, 16-bit counter, 200 points
C200 ~ C254, 32-bit counter, 53 points

When the counting
reaches the target, the
contact of the counter
will be On.

Latched
Data
register

Special
purpose
Index
indication

N/A

T0 ~ T199, 200 points (*2)
T192 ~ T199 is for subroutine
T250~T255, 6 accumulative points (*4)
T200 ~ T239, 40 points (*2)
T240 ~ T245, 6 accumulative points (*4)

16-bit counting
up
32-bit counting
up/down
32-bit
high-speed
counter
Initial step
point

General
purpose

D

Function

1ms

Zero return
S

Range

D0 ~ D199, 200 points, (*2)
D200 ~ D999, 800 points (*3)
D2000~D11999, 10,000 points (*3)

Total
12,000
points

D1000 ~ D1999, 1,000 points

Memory area for data
storage; E, F can be
used for index indication.

E0 ~ E7, F0 ~ F7, 16 points (*1)

File register

K0 ~ K9,999 (10,000 points) (*4)

N

For master control loop

N0 ~ N7, 8 points

P

For CJ, CALL instructions

P0~P255, 256 points

Expanded register for
data storage.
Control point for main
control loop
Position index for CJ and
CALL

I00□(X0), I10□(X1), I20□(X2), I30□(X3), I40□(X4),
I50□(X5), I60□(X6), I70□(X7), I90□(X10), I91□(X11),
External
interruption

Position index for
interruption subroutine.

I92□(X12), I93□(X13), I94□(X14), I95□(X15),
I96□(X16), I97□(X17), 16 點 (□=1, rising-edge trigger

Interruption

Pointer

I

,□=0, falling-edge trigger
Timed interruption

)

I6□□, I7□□, 2 points (□□=2~99ms) time base=1ms)
I8□□, 1 point (□□=1~99,time base=0.1ms)

Interruption
inserted when
I010, I020, I030, I040, I050, I060, 6 points
high-speed counter
reaches target
Pulse interruption

2-6

I110, I120, I130, I140, 4 points

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Type

Item

Device

Range

Constant

Communication
interrruption

Function

I150, I160, I170, 3 points
K-32,768 ~ K32,767 (16-bit operation)

K

Decimal form

H

Hexadecimal form

K-2,147,483,648 ~ K2,147,483,647 (32-bit operation)
H0000 ~ HFFFF (16-bit operation)
H00000000 ~ HFFFFFFFF (32-bit operation)

*1. Non-latched area cannot be modified.
*2. The preset non-latched area can be modified into latched area by setting up parameters.
*3. The preset latched area can be modified into non-latched area by setting up parameters.
*4. The fixed latched area cannot be modified

Latched settings for all devices in EH3/SV2 series MPU:
General purpose

Latched

Special auxiliary relay

Latched

M0 ~ M499

M500 ~ M999

M1000 ~ M1999

M2000 ~ M4095

M
(Auxiliary relay)

T
(Timer)

C
(Counter)

S
(Step relay)

Start: D1200 (K500)
End: D1201 (K999)

100 ms
10 ms
T0 ~ T199
T200 ~ T239
Default: non-latched
Default: non-latched
Accumulative type
Start: D1204 (K-1)*1
Start: D1206 (K-1)*1
It is fixed to be latched.
End: D1205 (K-1)*1
End: D1207 (K-1)*1
16-bit counting up
32-bit counting up/down
32-bit high-speed counting up/down
C0 ~ C99
C100 ~ C199
C200 ~ C219
C220 ~ C234
C235 ~ C245
C246 ~ C255
Default:
Default:
Default: latched
Default: latched
Default: latched
non-latched
non-latched
Start: D1208 (K100)
Start: D1210 (K220)
Start: D1212 (K235)
End: D1209 (K199)
End: D1211 (K234)
End: D1213 (K255)
General
Initial
Zero return
Latched
Step alarm
purpose
S0 ~ S9
S10 ~ S19
S20 ~ S499
S500 ~ S899
S900 ~ S1023
Non-latched (default)
Latched (default)
It is fixed to be latched.
Start: D1214 (K500)
End: D1215 (K899)
General purpose

D
(Register)

Some are latched and
Start: D1202 (K2,000)
End: D1203 (K4,095)
cannot be modified.
10 ms
1 ms
100 ms
T240 ~ T245
T246 ~ T249
T250 ~ T255

Latched

Special register

Latched

D0 ~ D199

D200 ~ D999

D1000 ~ D1999

D2000 ~ D12000

Default: non-latched

Default: latched

Start: D1216 (K200)
End: D1217 (K999)

Default: latched

Some is latched and
cannot be modified.

Start: D1218 (K2,000)
End: D1219 (K9,999)

K0 ~ K9,999
It is fixed to be latched.

File register
*1: K-1 refers to the default setting is non-latched.

Power On/Off or the MPU switches between RUN/STOP:
Memory of ES/EX/SS V5.5 (and versions above)
Memory type
Non-latched

Power
Off→On
Clear

STOP→RUN

Clear when M1033 = Off
Remain unchanged when M1033 = On

Latched
Special M,
Special D,
index register

RUN→STOP

Unchanged
Initial

Unchanged

Clear all non-latched
areas (M1031)

Clear all latched
areas (M1032)

Default
setting

Clear

Unchanged

0

Unchanged

Clear

Unchanged

Unchanged

Initial setting

Memory of SA/SX/SC/EH2/SV/EH3/SV2 series MPU:
Memory type

Power
Off→On

STOP→RUN

DVP-PLC Application Manual

RUN→STOP

Clear all non-latched
area (M1031)

Clear all latched
area (M1032)

Default
setting

2-7

2 Functions of Devices in DVP-PLC
Clear when M1033 = Off
Non-latched

Clear

Unchanged

Latched

Remain unchanged when
M1033 = On

Unchanged

Special M,
Special D,
index register

Initial

Unchanged

0

Unchanged

Clear

0

Unchanged

File Register

2.2

Clear

Initial
setting

Unchanged
Unchanged

0

Values, Constants [K] / [H]
K

Decimal form

K-32,768 ~ K32,767 (16-bit operation)
K-2,147,483,648 ~ K2,147,483,647 (32-bit operation)

H

Hexadecimal form

H0 ~ HFFFF (16-bit operation)
H0 ~ HFFFFFFFF (32-bit operation)

Constant

For different control purposes, there are five types of values inside DVP-PLC for executing the operations. See
the explanations bellows for the functions and works of every type of value.
1. Binary value (BIN)
All the operations and storage of values in PLC are conducted in BIN. Belows are the terms for BIN values.
Bit:

The basic unit for a BIN value, either 1 or 0.

Nibble:

Composed of 4 continuous bits (e.g. b3 ~ b0). Presented as the decimal value 0 ~ 9 of a digit
or 0 ~ F in hex.

Byte:

Composed of 2 continuous nibble (i.e. 8 bits, b7 ~ b0). Presented as 00 ~ FF in hex.

Word:

Composed of 2 continuous bytes (i.e. 16 bits, b15 ~ b0). Presented as 4-digit 0000 ~ FFFF in
hex.

Double word:

Composed of 2 continuous words (i.e. 32 bits, b31 ~ b0). Presented as 8 digit 00000000 ~
FFFFFFFF.

Bit, nibble, byte, word, and double word in a binary system:
DW

Double Word

W1

W0

BY3
NB7

BY2
NB6

NB5

Word

BY1
NB4

NB3

BY0
NB2

NB1

Byte
NB0

Nibble
Bit

2. Octal value (OCT)
The No. of external input and output terminals in DVP-PLC is numbered in octal system.
For example:
External input: X0 ~ X7, X10 ~ X17…(device No.)
External output: Y0 ~ Y7, Y10 ~ Y17…(device No.)
2-8

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
3. Decimal value (DEC)
Occassions of using decimal values in DVP-PLC:
Set value in timer T and counter C, e.g. TMR C0 K50 (constant K)
No. of device S, M, T, C, D, E, F, P, I, e.g. M10, T30. (device No.)
Operands in application instructions, e.g. MOV K123 D0 (constant K)
4. Binary code decimal (BCD)
A decimal datum is presented by a nibble or 4 bits. Therefore, a continuous 16 bits can be presented as a 4-digit
decimal value. BCD is mainly used on reading the input value from the DIP switch or the data output to a 7-section
display.
5. Hexadecimal value (HEX)
Occassion of using hexadecimal values:
Operands in application instructions, e.g. MOV H1A2B D0 (constant H)
Constant K:
“K” is normally placed before a decimal value in the PLC. For example, K100 refers to a decimal value, 100.
Exception:
K and bit devices X, Y, M and S can combine into data in bit, byte, word or double word, e.g. K2Y10, K4M100.
Here K1 refers to a 4-bit data and K2 ~ K4 refer to 8-bit, 12-bit and 16-bit data.

Constant H:
“H” is normally placed before a hexadecimal value in the PLC. For example, H100 refers to a hexadecimal value,
100.
Reference table:
Binary
(BIN)

Octal
(OCT)

For PLC internal operation

No. of device
X, Y

0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
1
1

0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
0
0

0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
0
0

0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
0
0

0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1

:

DVP-PLC Application Manual

0
1
2
3
4
5
6
7
10
11
12
13
14
15
16
17
20
21
:

Decimal
(DEC)
Constant K,
No. of device M, S, T, C,
D, E, F, P, I
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
:

0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

Binary Code Decimal
(BCD)

Hexadecimal
(HEX)

For DIP switch and 7-section
display

Constant H

0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0

0
0
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1

0
0
0
0
0
0
0
0
1
1
0
0
0
0
0
0
0
0
:

0
0
0
0
1
1
1
1
0
0
0
0
0
0
1
1
1
1

0
0
1
1
0
0
1
1
0
0
0
0
1
1
0
0
1
1

0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1

0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
10
11
:

2-9

2 Functions of Devices in DVP-PLC
Binary
(BIN)

Octal
(OCT)

For PLC internal operation

No. of device
X, Y

:
:
0

2.3

1 1

0

Decimal
(DEC)

:
:
143

0 0 1 1

Constant K,
No. of device M, S, T, C,
D, E, F, P, I
:
:
99

Binary Code Decimal
(BCD)

Hexadecimal
(HEX)

For DIP switch and 7-section
display

Constant H

:
:
1

0

0

1

1

0

0

1

:
:
63

Numbering and Functions of External Input/Output Contacts [X] / [Y]

No. of input/output contacts (in octal):
The No. of input and output contacts on the PLC MPU starts from X0 and Y0. The range of the No. varies upon
the number of points on the MPU. For I/O extension units, the No. of input and output contacts is calculated according
to its connection sequence with the MPU.
ES/EX/SS series MPU:
Model

DVP-14ES

DVP-14SS DVP-20EX DVP-24ES

DVP-32ES

DVP-40ES

DVP-60ES

I/O Extension Unit

Input X

X0 ~ X7
(8 points)

X0 ~ X7
(8 points)

X0 ~ X7
(8 points)

X0 ~ X17
(16 points)

X0 ~ X17
(16 points)

X0 ~ X27
(24 points)

X0 ~ X43
(36 points)

X20/30/50 ~ X177
(Note)

Output Y

Y0 ~ Y5
(6 points)

Y0 ~ Y5
(6 points)

Y0 ~ Y5
(6 points)

Y0 ~ Y7
(8 points)

Y0 ~ Y17
(16 points)

Y0 ~ Y17
(16 points)

Y0 ~ Y27
(24 points)

Y20/30 ~ Y177
(Note)

Note: The input points on I/O extension units start from X20 and output points from Y20, except input points on
DVP-40ES start from X30 and output from Y20; input points on DVP-60ES start from X50 and output from Y30. The No. of
input/output points on the I/O extension units increases by 8’s multiple. If the number of points is less than 8, it will be
counted as 8.

SA/SX/SC series MPU:
Model

DVP-10SX (Note1)

DVP-12SA

DVP-12SC

I/O Extension Unit (Note 2)

Input X

X0 ~ X3 (4 points)

X0 ~ X7 (8 points)

X0 ~ X5, X10 ~ X11 (8 points)

X20 ~ X177

Output Y

Y0 ~ Y1 (2 points)

Y0 ~ Y3 (4 points)

Y0 ~ Y1, Y10 ~ Y11 (4 points)

Y20 ~ Y177

Note 1: Besides 4DI and 2DO, SX series MPU has also 2AI (12-bit) and 2AO (12-bit) of analog input/output.
Note 2: SX/SA/SC series MPU share the extension units with SS series MPU. The input points on I/O extension units start
from X20 and output points start from Y20. The calculation on the No. of I/O points is the same as that in SS series.

EH series MPU:
Model

DVP-16EH

DVP-20EH
(Note 1)

DVP-32EH
(Note1, 2)

DVP-40EH

DVP-48EH

DVP-64EH

DVP-80EH

I/O
Extension
Unit (Note 3)

Input X

X0 ~ X7
(8 points)

X0 ~ X13
(12 points)

X0 ~ X17
(16 points)

X0 ~ X27
(24 points)

X0 ~ X27
(24 points)

X0 ~ X37
(32 points)

X0 ~ X47
(40 points)

X※~X377

Output Y

Y0 ~ Y7
(8 points)

Y0 ~ Y7
(8 points)

Y0 ~ Y17
(16 points)

Y0 ~ Y17
(16 points)

Y0 ~ Y27
(24 points)

Y0 ~ Y37
(32 points)

Y0 ~ Y47
(40 points)

Y※~Y377

Note 1: The output type of 20EH00T and 32EH00T is transistor, among which Y0 and Y2 are high-speed transistor output
(200kHz) and other outputs are normal transistor output (10kHz). The output type of other MPUs with 16/48/64/80 points
is transistor and all outputs are normal transistor output (10kHz).
Note 2: The terminal layouts of 32EH00T, 32EH00R and 32EH00M are different. See the instruction sheets of EH series
MPU. In 32EH00M, CH0 (Y0, Y1) and CH1 (Y2, Y3) are high-speed differential output (200kHz).
Note 3: The start No. of the input and output points on the I/O extension unit resumes from the last No. in the MPU. The
start No. of input points on the I/O extension unit of DVP-16EH and DVP-20EH start from X20 and output points start from
Y20. The No. on the I/O extension unit are in sequence, with max. input point No. X377 and max. output point No. Y377.

EH2 series MPU:
Model

2-10

DVP-16EH2

DVP-20EH2
(Note 1)

DVP-32EH2 DVP-40EH2
(Note1)
(Note 2)

DVP-48EH2

DVP-64EH2

DVP-80EH2

I/O Extension
Unit (Note 3)

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Input X

X0 ~ X7
(8 points)

X0 ~ X13
(12 points)

X0 ~ X17
(16 points)

X0 ~ X27
(24 points)

X0 ~ X27
(24 points)

X0 ~ X37
(32 points)

X0 ~ X47
(40 points)

X※~X377

Output Y

Y0 ~ Y7
(8 points)

Y0 ~ Y7
(8 points)

Y0 ~ Y17
(16 points)

Y0 ~ Y17
(16 points)

Y0 ~ Y27
(24 points)

Y0 ~ Y37
(32 points)

Y0 ~ Y47
(40 points)

Y※~Y377

Note 1: The output type of 20EH00T2 and 32EH00T2 is transistor, among which Y0 and Y2 are high-speed transistor
output (200kHz) and other outputs are normal transistor output (10kHz). The output type of other MPUs with 16/48/64/80
points is transistor and all outputs are normal transistor output (10kHz).
Note 2: The output type of 40EH00T2 is transistor, among which CH0 (Y0, Y1), CH1 (Y2, Y3), CH2 (Y4) and CH3 (Y6)
are high-speed transistor output (200kHz). The output type of other output points is normal transistor output (10kHz). The
high-speed inputs CH0 (X0, X1), CH1 (X4, X5), CH2 (X10, X11) and CH3 (X14, X15) are able to achieve max. frequency
200kHz.
Note 3: The I/O points on I/O extension units follow the I/O points on MPUs. The input points on DVP-16EH2 and
DVP-20EH2 start from X20 and output points from Y20. The I/O points on I/O extension units are numbered in sequence.
The maximal input number is X377, and the maximal output number is Y377.

SV/SV2 series MPU:
Model

DVP-28SV (Note 1)

I/O Extension Unit (Note 2)

Input X

X0 ~ X17 (16 points)

X20 ~ X377

Output Y

Y0 ~ Y13 (12 points)

Y20 ~ Y377

Note 1: The output type of 28SV11T is transistor output, among which CH0 (Y0, Y1), CH1 (Y2, Y3), CH2 (Y4) and CH3
(Y6) are high-speed transistor output (200kHz); others are normal transistor output (10kHz).
Note 2: The input points on I/O extension units start from X20 and output points start from Y20. The calculation on the No.
of I/O points is the same as that in SS series.

EH3 series MPU:
Model

DVP-16EH3 DVP-20EH3

DVP-32EH3
(Note 3)

DVP-40EH3

DVP-48EH3

DVP-64EH3 DVP-80EH3

Input X

X0~X7

X0~X13

X0~X17

X0~X27

X0~X27

X0~X37

X0~X47

(Note 1)

(8 points)

(12 points)

(16 points)

(24 points)

(24 points)

(32 points)

(40 points)

Output Y

Y0~Y7

Y0~Y7

Y0~Y17

Y0~Y17

Y0~Y27

Y0~Y37

Y0~Y47

(Note 2)

(8 points)

(8 points)

(16 points)

(16 points)

(24 points)

(32 points)

(40 points)

I/O Extension
Unit (Note 4)
X※~X377
Y※~Y377

Note 1: High-speed input points (X0~X17) on the MPU: The 200KHz input points on 16EH3 are Ch0(X0/X1) and
Ch1(X4/X5); the 200KHz input points on 20EH3 are Ch0(X0/X1) and Ch1(X4/X5); the 20KHz input point on 20EH3 is
Ch2(X10/X11); the 200KHz input points on other MPUs are Ch0(X0/X1), Ch1(X4/X5), Ch2(X10/X11) and Ch3(X14/X15).
X2~X17 which are not listed above are 10KHz input points.
Note 2: High-speed output points (Y0~Y17) on the MPU: The 200KHz output points on 16EH3, 20EH3 and 32EH3 are
Ch0(Y0) and Ch1(Y2); the 200KHz output points on 40EH3, 48EH3, 64EH3, and 80EH3 are Ch0(Y0/Y1), Ch1(Y2/Y3),
Ch2(Y4), and CH3(Y6). Other output points which are not listed are 10KHz output points.
Note 2: The high-speed input points Ch0(X0/X1) and Ch1(X4/X5) on DVP32EH00M3 are 200KHz differential input points;
Ch2(X10/X11) and Ch3(X14/X15) are 200KHz open collector input points; other input points are 10KHz open collector
input points. The high-speed output points Ch0(Y0/Y1) and Ch1(Y2/Y3) are 200KHz differential output points; other output
points are 10KHz open collector output points.
Note 4: The I/O points on I/O extension units follow the I/O points on MPUs. The input points on DVP-16EH3 and
DVP-20EH3 start from X20 and output points from Y20. The I/O points on I/O extension units are numbered in sequence.
The maximal input number is X377, and the maximal output number is Y377.

Input relay X0 ~ X377
The numbering of input relays (or input terminals) is in octal form. EH series MPU can have up to 256
points and the range is: X0 ~ X7, X10 ~ X17, …, X370 ~ X377.
Output relay Y0 ~ Y377
The numbering of output relays (or output terminals) is also in octal form. EH2 series MPU can have up to
256 points and the range is: Y0 ~ Y7, Y10 ~ Y17, …, Y370 ~ Y377.
Functions of input contact X
The input contact X is connected to the input device and reads the input signals into the PLC. There is no
DVP-PLC Application Manual

2-11

2 Functions of Devices in DVP-PLC
limitation on the times of using contact A or B of input contact X in the program. On/Off of the input contact X
only changes with On/Off of the input device. You cannot use the peripheral devices (HPP or WPLSoft) to force
On/Off of the input contact X.
The special relay M1304 in SS/ES/EX/SA/SX/SC/EH2/SV/EH3/SV2 series MPU allows the peripheral
devices HPP or WPLSoft to set up On/Off of the MPU input contact X, but the PLC will not be able to receive
external input signals at this time.
Functions of output contact Y
Output contact Y sends out On/Off signals to drive the load connected to output contact Y. There are two
types of output contacts, relay and transistor. Thereis no limitation on the times of using contact A or B of output
contact Y in the program, but the No. of output coil Y can only be used once in the program; otherwise
according to the scan principle of the PLC program, the output status will be determined by the circuit of the last
output Y in the program.
The output of Y0 will be determined by circuit 2, i.e. On/Off of X10 will

X0
1

Y0

determine the output status of Y0.

Y0 is repeated
X10
2

Y0

The Handling Process of PLC Program (Batch I/O)
Regenerate input signal

X input

Regenerate input signal
1. Before the execution of the program, PLC reads the

Input terminal

On/Off status of the external input signals into the

Read into memory

input signal memory at a time.

Input signal memory
Program processing

2. The On/Off status of the input signal during the

Read X0 status from memory

Y0
Y0

Read Y0 status from memory
M0
Write in M0 status

Regenerate output

Output
Output latched memory

Device Memory

Write in Y0 status

X0

execution of the program will not change the signal
status in the input signal memory. The new On/Off
status will be read in in the next scan.
3. There will be approximately a 10ms delay from the
On→Off or Off→On changes to the status being
recognized by the contact in the program. The delay
time may be affected by the scan time in the
program.
Program processing

Output terminal

After the PLC reads the On/Off status of every input
signal in the input signal memory, it will start to execute

Y output

every instruction in the program in order starting from
address 0. The execution result (On/Off of every output
coil) will be stored in order into the device memory.

2-12

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Regenerate output
1. When the program executes to END instruction, it
will send the On/Off status of Y in the device memory
to the output latched memory. The output latched
memory is the coil of the output relay.
2. There will be a 10ms delay from OnÆOff or OffÆOn
of the relay coil to the On/Off status of the contact.
3. There will be a 10 ~ 20us delay from OnÆOff or
OffÆOn of the transistor module to the On/Off status
of the contact.

2.4

Numbering and Functions of Auxiliary Relays [M]

No. of auxiliary relays (in decimal)
ES/EX/SS series MPU:
General purpose
Auxiliary relay M Latched
Special purpose

M0 ~ M511, M768 ~ M999, 744 points. Fixed to be non-latched.
M512 ~ M767, 256 points. Fixed to be latched.

Total 1,280
points

M1000 ~ M1279, 280 points. Some are latched.

SA/SX/SC series MPU:
General purpose
Auxiliary relay M Latched
Special purpose

M0 ~ M511, 512 points. Fixed to be non-latched.
M512 ~ M999, M2000 ~ M4095, 2,584 points. Can be modified to be
non-latched by setting up parameters.

Total 4,096
points

M1000 ~ M1999, 1000 points. Some are latched.

EH2/SV/EH3/SV2 series MPU:
General purpose
Auxiliary relay M Latched
Special purpose

M0 ~ M499, 500 points. Can be modified to be latched by setting up
parameters.
M500 ~ M999, M2000 ~ M4095, 2,596 points. Can be modified to be
non-latched by setting up parameters.

Total 4,096
points

M1000 ~ M1999, 1,000 points. Some are latched.

Functions of auxiliary relays:
Both auxiliary relay M and output relay Y have output coils and contact A, B, and there is no limitation on the
times of using the contact. You can use auxiliary relay M to assemble a control loop, but it cannot directly drive the
external load. There are three types of auxiliary relays:
1. General purpose auxiliary relay: If the relay encouters power cut during the operation of the PLC, its status will
be reset to Off and stay Off when the power is on again.
2. Latched auxiliary relay: If the relay encounters power cut during the operation of the PLC, its status will be
retained and stay at the status before the power cut when the power is on again.
3. Special purpose auxiliary relay: Every relay of this kind has its specific function. Do not use undefined special
purpose auxiliary relay. See 2.10 for special puspose auxiliary relay of all series MPU and 2.11 for its functions.

2.5

Numbering and Functions of Step Relays [S]

DVP-PLC Application Manual

2-13

2 Functions of Devices in DVP-PLC
No. of step relays (in decimal)
ES/EX/SS series MPU:

Step relay S

Initial latched

S0 ~ S9, 10 points. Fixed to be latched.

Zero return
latched

S10 ~ S19, 10 points, used with IST instruction. Fixed to be latched.

Latched

S20 ~ S127, 108 points. Fixed to be latched.

Total 128
points

SA/SX/SC series MPU:
Step relay S

Step relay S

Initial

S0 ~ S9, 10 points. Fixed to be non-latched.

Zero return

Total
1,024
points
S10 ~ S19, 10 points, used with IST instruction. Fixed to be non-latched.

General purpose

S20 ~ S511, 492 points. Fixed to be non-latched.

Latched

Total
S512 ~ S895, 384 points. Can be modified to be non-latched by setting
up parameters.
1,024 points

Alarm

S896 ~ S1023, 128 points. Fixed to be latched.

EH2/SV/EH3/SV2 series MPU:

Step relay S

Initial

S0 ~ S9, 10 points. Can be modified to be latched by setting up
parameters.

Zero return

S10 ~ S19, 10 points, used with IST instruction. Can be modified to be
latched by setting up parameters.

General purpose

S20 ~ S499, 480 points. Can be modified to be latched by setting up
parameters.

Latched

S500 ~ S899, 400 points. Can be modified to be non-latched by setting
up parameters.

Alarm

S900 ~ S1023, 124 points. Can be modified to be latched by setting up
parameters.

Total
1,024 points

Functions of step relays:
The step relay S can easily set up the procedure in the industrial automation, which is the most basic device in
the the sequential function chart (SFC) and has to be used with STL, RET instructions.
The device No. of S is S0 ~ S1023 (total 1,024 points) and both step relay S and output relay Y have output coils
and contact A, B, and there is no limitation on the times of using the contact. S cannot directly drive the external load.
When the step relay is not used in SFC, it can be used as a normal auxiliary relay. There are four types of step relays:
1. Initial step relay: S0 ~ S9, total 10 points, used for initial steps.
2. Zero return step relay: S10 ~ S19, total 10 points. S10 ~ S19 are planned for zero return when used with API 60
IST instruction in the program. If they are not used with IST, they will become normal step relays.
3. General purpose step relay: S20 ~ S511, total 492 points (for SA/SX/SC series MPU); S20 ~ S499, total 480
points (for EH2/SV/EH3/SV2 series MPU). Used for general purposes in SFC and their status will all be cleared
when the operation of the PLC encounters power cut.
4. Latched step relay: S512 ~ S895, total 384 points (for SA/SX/SC series MPU); S20 ~ S127, total 108 points (for
ES/EX/SS series MPU); S500 ~ S899, total 400 points (for EH2/SV/EH3/SV2 series MPU). Used for latched
function in SFC and their status will all be retained when the operation of the PLC encounters power cut. They will
remain at the status before the power cut when the PLC is powered again.
5. Alarm step relay: S896 ~ S1023, total 128 points (for SA/SX/SC series MPU); S900 ~ S1023, total 124 points
(for EH2/SV/EH3/SV2 series MPU). Used with alarm driving instruction API 46 ANS as an alarm contact for

2-14

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
recording the alarm messages or eliminating external malfunctions.

2.6

Numbering and Functions of Timers [T]

No. of timers (in decimal)
ES/EX/SS series MPU:

Timer T

100ms general purpose

T0 ~ T63, 64 points

10ms general purpose

T64 ~ T126, 63 points (M1028 = On:10ms; M1028 = Off:100ms)

1ms general purpose

T127, 1 point

Total
128 points

SA/SX/SC series MPU:

Time T

100ms general purpose

T0 ~ T199, 200 points. T192 ~ T199 are the timers for subroutine. Fixed to
be non-latched

100ms accumulative

T250 ~ T255, 6 points. Fixed to be latched.

10ms general purpose

T200 ~ T239, 40 points. Fixed to be non-latched

10ms accumulative

T240 ~ T245, 6 points. Fixed to be latched.

1ms accumulative

T246 ~ T249, 4 points. Fixed to be latched.

Total
256 points

EH2/SV/EH3/SV2 series MPU:

Timer T

100ms general purpose

T0 ~ T199, 200 points. Can be latched by setting up parameters.
T192 ~ T199 are the timers for subroutine.

100ms accumulative

T250 ~ T255, 6 points. Fixed to be latched.

10ms general purpose

T200 ~ T239, 40 points. Can be latched by setting up parameters.

10ms accumulative

T240 ~ T245, 6 points. Fixed to be latched.

1ms accumulative

T246 ~ T249, 4 points. Fixed to be latched.

Total
256 points

Functions of timers:
The units of the timer are 1ms, 10ms and 100ms and the counting method is counting up. When the present
value in the timer equals the set value, the output coil will be On. The set value should be a K value in decimal and the
data register D can also be a set value.
The actual set time in the timer = timing unit × set value
There are three types of timers:
1. General purpose timer:
For ES/SA series MPU: The timer executes once when the program reaches END instruction. When TMR
instruction is executed, the output coil will be On when the timing reaches its target.
For EH2/SV/EH3/SV2 series MPU: The timer executes once when the program reaches TMR instruction. When
TMR instruction is executed, the output coil will be On when the timing reaches its target.
X0
TMR
T0
Y0

DVP-PLC Application Manual

T0

K100

When X0 = On, The PV in timer T0 will count up by
100ms. When the PV = SV K100, the output coil T0
will be On.

2-15

2 Functions of Devices in DVP-PLC
10 secs

When X0 = Off or the power is off, the PV in timer T0
will be cleared as 0, and the output coil T0 will be

X0
SV K100
T0

Off.

PV

Y0

2. Accumulative type timer:
For ES/SA series MPU: The timer executes once when the program reaches END instruction. When TMR
instruction is executed, the output coil will be On when the timing reaches its target.
For EH2/SV/EH3/SV2 series MPU: The timer executes once when the program reaches TMR instruction. When
TMR instruction is executed, the output coil will be On when the timing reaches its target.
X0
T MR

T 250

K100

T 250

When X0 = On, The PV in timer T250 will count up
by 100ms. When the PV = SV K100, the output coil
T0 will be On.

Y0

When X0 = Off or the power is off, timer T250 will
T1

T2

T 1+ T2=10sec

unchanged. When X0 is On again, the timing will

X0
SV K100
T 250

temporarily stop the timing and the PV remain

PV

resume and the PV will count up and when the PV =
SV K100, the output coil T0 will be On.

Y0

3. Subrountine timer:
Timer T192 ~ T199 are used in subrountines or interruption subroutines.
For SA series MPU: The timer executes once when the program reaches END instruction. When END instruction
is executed, the output coil will be On when the timing reaches its target.
For EH2/SV/EH3/SV2 series MPU: The timer executes once when the program reaches TMR or END instruction.
When TMR or END instruction is executed, the output coil will be On when the PV equals SV.
If the general purpose timer is used in a subroutine or interruption subroutine but the subroutine is not being
executed, the timer will not be able to time correctly.
How to designate SV: The actual set time in the timer = timing unit × set value
a) Designating constant K: SV is a constant K
b) Indirectly designating D: SV is data register D

2.7

Numbering and Functions of Counters [C]

No. of counters (in decimal)
ES/EX/SS series MPU:

2-16

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC

Counter C

32-bit counting up/down
high-speed counter C

16-bit counting up, for
general purpose

C0 ~ C111, 112 points. Fixed to be non-latched.

16-bit counting up, for
latched

C112 ~ C127, 16 points. Fixed to be latched.

1-phase 1 input

C235 ~ C238, C241, C242, C244, 7 points. Fixed to be
latched.

1-phase 2 inputs

C246, C247, C249, 3 points. Fixed to be latched.

2-phase 2 inputs

C251, C252, C254, 3 points. Fixed to be latched.

16-bit counting up, for
general purpose

C0 ~ C95, 96 points. Fixed to be non-latched.

16-bit counting up, for
latched

C96 ~ C199, 104 points. Can be modified to be non-latched
by setting up parameters.

32-bit counting
up/down, for general
purpose

C200 ~ C215, 16 points. Fixed to be non-latched.

Total
141 points

SA/SX/SC series MPU:

Counter C

(SA/SX) 32-bit counting
up/down high-speed
counter C

(SC) 32-bit counting
up/down high-speed
counter C

32-bit counting
up/down, for latched
1-phase 1 input, for
latched
1-phase 2 inputs, for
latched
2-phase 2 inputs, for
latched
1-phase 1 input, for
latched
1-phase 2 inputs, for
latched
2-phase 2 inputs, for
latched

Total
235 points

C216 ~ C234, 19 points. Can be modified to be non-latched
by setting up parameters.
C235 ~ C242, C244, 9 points
Total 16
points

C246, C247, C249, 3 points
C251 ~ C254, 4 points
C235 ~ C245, 11 points

Can be modified to be
non-latched by setting up
parameters.
Total 19
points

C246 ~ C250, 4 points
C251 ~ C255, 4 points

EH2/SV/EH3/SV2 series MPU:

Counter C

32-bit counting up/down
high-speed counter C

16-bit counting up, for
general purpose

C0 ~ C99, 100 points. Can be modified to be latched by
setting up parameters.

16-bit counting up, for
latched

C100 ~ C199, 100 points. Can be modified to be non-latched
area by setting up parameters.

32-bit counting
up/down, for general
purpose

C200 ~ C219, 20 points. Can be modified to be latched by
setting up parameters.

32-bit counting
up/down, for latched

C220 ~ C234, 15 points. Can be modified to be non-latched
by setting up parameters.

Software 1-phase 1
input

C235 ~ C240, 6 points

Hardware 1-phase 1
input

C241 ~ C244, 4 points

Hardware 1-phase 2
inputs

C246 ~ C249, 4 points

Hardware 2-phase 2
inputs

C251 ~ C254, 4 points

Total
253 points

Can be modified to be
non-latched by setting up
parameters.

Features of counter:
16 bits counters

32 bits counters

Type

General purpose

Counting direction

Counting up

Counting up, counting down

Set value

0 ~ 32,767

-2,147,483,648 ~ +2,147,483,647

SV designation

Constant K or data register D

Constant K or data register D (designating 2 values)

DVP-PLC Application Manual

General purpose

High speed

2-17

2 Functions of Devices in DVP-PLC
16 bits counters

32 bits counters

Present value

Counting will stop when the SV is
reached.

Counter will continue when the SV is reached.

Output contact

On and being retained when the
counting reaches SV.

On and keeps being On when counting up reaches SV.
Reset to Off when counting down reaches SV.

Reset

PV will be return to 0 when RST instruction is executed and the contact will be reset to Off.

Contact action

Acts when the scanning is completed.

Acts when the scanning is
completed.

Acts immediately when the
counting reaches its target,
has nothing to do with the scan
period.

Functions of counters:
When the pulse input signals of the counter go from Off to On and the present value in the counter equals the
set value, the output coil will be On. The set value should be a K value in decimal and the data register D can also be
a set value.
16-bit counters C0 ~ C199:
1. The setup range of 16-bit counter: K0 ~ K32,767. K0 is the same as K1. The output contact will be On
immediately when the first counting starts.
2. PV in the general purpose counter will be cleared when the power of the PLC is switched off. If the counter is a
latched type, the counter will retain the PV and contact status before the power is off and resume the counting
after the power is on again.
3. If you use MOV instruction, WPLSoft or HPP to send a value bigger than the SV to the present value register of
C0, next time when X1 goes from Off to On, the contact of counter C0 will be On and its PV will equal SV.
4. The SV in the counter can be constant K (set up directly) or the values in register D (set up indirectly, excluding
special data registers D1000~ D1999).
5. If you set up a constant K as the SV, it should be a positive value. Data register D as SV can be positive or
negative. When the PV reaches up to 32,767, the next PV will turn to -32,768.
Example:

2-18

LD

X0

RST

C0

LD

X1

CNT

C0 K5

LD

C0

OUT

Y0

X0
RST

C0

CNT

C0

X1
K5

C0
Y0

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
a) When X0 = On, RST instruction will be
executed, PV in C0 will be “0” and the

X0

output contact will be reset to Off.
b) When X1 goes from Off to On, the PV in

X1
5

the counter will count up (plus 1).

4

c) When the counting of C0 reaches SV K5,
the contact of C0 will be On and PV of C0

3
2
1

PV in C0

0

0

= SV = K5. The X1 trigger signal comes
afterwards will not be accepted by C0 and

SV

Contacts Y0, C0

the PV of C0 will stay at K5.
32-bit general purpose addition/subtraction counters C200 ~ C234:
1. The setup range of 32-bit counter: K-2,147,483,648 ~ K2,147,483,647 (not available for ES/EX/SS series MPU).
2. Addition or subtraction of the counters is designated by On/Off status of special auxiliary relays M1200 ~ M1234.
For example, when M1200 = Off, C200 will be an addition counter; when M1200 = On, C200 will be a subtraction
counter.
3. The SV can be constant K or data register D (excluding special data registers D1000 ~ D1999). Data register D as
SV can be a positive or negative value and an SV will occupy two consecutive data registers.
4. PV in the general purpose counter will be cleared when the power of the PLC is switched off. If the counter is a
latched type, the counter will retain the PV and contact status before the power is off and resume the counting
after the power is on again.
5. When the PV reaches up to 2,147,483,647, the next PV will turn to -2,147,483,648. When the PV reaches down to
-2,147,483,648, the next PV will turn to 2,147,483,647.
Example:
LD

X10

OUT

M1200

LD

X11

RST

C200

LD

X12

CNT

C200 K-5

LD

C200

OUT

Y0

DVP-PLC Application Manual

X10
M1200
X11
RST

C200

DCNT

C200

X12
K-5

C200
Y0

2-19

2 Functions of Devices in DVP-PLC
a) X10 drives M1200 to determine
whether C200 is an addition or
subtraction counter.
b) When X11 goes from Off to On, RST
instsruction will be executed and the
PV in C200 will be cleared to “0” and

X10

the contact will be Off.

X11

c) When X12 goes from Off to On, the PV
in the counter will count up (plus 1) or

Accumulatively
increasing

X12
5
4

count down (minus 1).
d) When the PV in C200 changes from
K-6 to K-5, the contact of C200 will go

3

PV in
C200

4
3

2

2

1

1

0

-1
-2
-3

-3
-4

changes from K-5 to K-6, the contact of
e) If you use MOV instruction, WPLSoft

0

0

from Off to On. When the PV in C200
C200 will go from On to Off.

Accumulatively
increasing

Progressively
decreasing

-4
-5

Contacts
Y0, C0

When the output contact
was On.

-5
-6

-6
-7

-7
-8

or HPP to send a value bigger than the
SV to the present value register of C0,
next time when X1 goes from Off to
On, the contact of counter C0 will be
On and its PV will equal SV.
32-bit high-speed addition/subtraction counters C235 ~ C255:
1. The setup range of 32-bit counter: K-2,147,483,648 ~ K2,147,483,647
2. Addition or subtraction of C235 ~ C244 is designated by On/Off status of special auxiliary relays M1235 ~ M1244.
For example, when M1235 = Off, C235 will be an addition counter; when M1235 = On, C235 will be a subtraction
counter.
3. Addition or subtraction of C246 ~ C255 is designated by On/Off status of special auxiliary relays M1246 ~ M1255.
For example, when M1246 = Off, C246 will be an addition counter; when M1246 = On, C246 will be a subtraction
counter.
4. The SV can be constant K or data register D (excluding special data registers D1000 ~ D1999). Data register D
as SV can be a positive or negative value and an SV will occupy two consecutive data registers.
5. If using DMOV instruction, WPLSoft or HPP to send a value which is large than the setting to any high-speed
counter, next time when the input point X of the counter goes from Off to On, this contact will remain unchanged
and it will perform addition and subtraction with the present value.
6. When the PV reaches up to 2,147,483,647, the next PV will turn to -2,147,483,648. When the PV reaches down
to -2,147,483,648, the next PV will turn to 2,147,483,647.

2-20

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
High-speed counters for ES/EX/SS series MPU, total bandwidth: 20kHz
Type
Input

C235

1-phase input

X0

U/D

C236

C237

C238

1-phase 2 inputs

C241

C242

C246

C247

C249

C251

C252

C254

U/D

U

U

U

A

A

A

R

D

D

D

B

R

R

U/D

X1

U/D

R

X2

U/D

U/D

X3

U/D

U: Progressively increasing input
D: Progressively decreasing input

R

S

A: A phase input
B: B phase input

2-phase 2 inputs

C244

B

B

R

R

S

S

S: Input started
R: Input cleared

1. Input points X0 and X1 can be planned as counters of higher speed with 1-phase 1 input reaching 20kHz. But the
two counting frequencies added together has to be smaller or equal 20kHz. If the input is a 2-phase 2 input signal,
the counting frequency will be approximately 4kHz. The 1-phase input of high-speed counters X2 and X3 and
reach 10kHz.
2. The use of DHSCS instruction together with DHSCR instruction in ES series MPU cannot exceed 4 times.
High-speed counters for SA/SX series MPU, total bandwidth: 40kHz
Type
1-phase input
1-phase 2 inputs
2-phase 2 inputs
Input
C235 C236 C237 C238 C239 C240 C241 C242 C244 C246 C247 C249 C251 C252 C253 C254
X0

U/D

X1

U/D

X2

U/D

U/D

U

U

U

A

A

B

A

R

R

D

D

D

B

B

A

B

R

R

U/D

X3

U/D
U/D

X4

R

S

R

R

S

S

U/D

X5

U/D
U: Progressively increasing input
D: Progressively decreasing input

A: A phase input
B: B phase input

S: Input started
R: Input cleared

1. The frequency of input points X0 and X1 of 1-phase input can reach up to 20kHz, X2 ~ X5 can reach 10kHz. The
frequency of C251, C252 and C254 of 2-phase input (X0, X1) can reach up to 4kHz. The maximum frequency of
C253 is 25kHz (only supports 4 times frequency counting).
2. Input point X5 has two functions:
a) When M1260 = Off, C240 will be normal U/D high-speed counter.
b) When M1260 = On and DCNT instruction enables C240, X5 will be the shared reset signal for C235 ~ C239.
Counter C240 will continue to receive the input signals from X5.
High-speed counters for SC series MPU, total bandwidth: 130kHz
Type
1-phase input
1-phase 2 inputs
2-phase 2 inputs
Input C235 C236 C237 C238 C239 C240 C241 C242 C243 C244 C245 C246 C247 C249 C250 C251 C252 C254 C255
X0

U/D

X1

U/D

X2

U/D

X3

U/D

U/D

U

U

U

A

A

A

R

R

D

D

D

B

B

B

R

R

R

R

U/D
U/D

X4

R

S

S

S

U/D

X5

U/D

X10

U/D

X11
U: Progressively increasing input
D: Progressively decreasing input

DVP-PLC Application Manual

U/D
A: A phase input
B: B phase input

U

A

D

B

S: Input started
R: Input cleared

2-21

2 Functions of Devices in DVP-PLC
1. The functions of high-speed counters of input points X0 ~ X5 are the same of those in SA/SX series MPU.
2. The maximum frequency of the input points X10 (C243), X11 (C245) and (X10, X11)(C250) of 1-phase input is
100kHz. The total bandwidth of X10 ~ X11 high-speed counting is 130kHz. The maximum input frequency of
C255 (2-phase input X10, X11) is 35kHz.
3. The use of DHSCS instruction together with DHSCR instruction in SA/SX/SC series MPU cannot exceed 6 times.
The use of DHSZ instruction cannot exceed 6 times as well. When DHSCS instruction designates I interruption,
the designated high-speed counter cannot be used in DHSCS, DHSCR and DHSZ instruction.
4. Functions of high-speed counters X10 ~ X11 in SC series MPU:
a) When X10 and X11 are set to be 1-phase 1 input or 1-phase 2 outputs, the maximum frequency can reach
100kHz. When set to be 2-phase 2 inputs, the maximum frequency can reach 35kHz.
b) X10 and X11 can be set to be rising-edge or falling-edge counting. X10 is set by D1166 and X11 by D1167. K0:
rising-edge counting; K1: falling-edge counting; K2: rising-/falling-edge counting (only available in X10).
c) Counting up or down of C243 is determined by On/Off status of M1243 anc that of C245 is determined by
On/Off of M1245. Rising-edge and falling-edge countings cannot be performed at the same time. Rising edge
or falling edge of C250 is determined by the content (K0 or K1) in D1166. C255 can only be used in 4 times
frequency counting and rising-edge and falling-edge triggers are not available for C255.
d) When you use C243 or C245, you will not be able to use C250 or C255, and vice versa.
e) High-speed counter and high-speed comparator:
X10

C243

X11

C245

Output reached
comparison value
S V 10
S V 11

C250

C255

f)

Explanations on high-speed counter and high-speed comparator:
(i) When DHSCS and DHSCR instructions use new added high-speed counters, they can only use two
groups of SVs in high speed comparison instruction. Assume you have used the comparison instruction
DHSCS D0 C243 Y10, you can only set another group of instruction DHSCR D2 C243 Y10 or DHSCS D4
C245 Y10.
(ii) When DHSZ instruction uses new added high-speed counters, it can only use one group of SV in the
comparator.
(iii) The number of SVs in high speed comparison instructions offered by SA/SX series MPU will not decrease
owing to the increasing of high-speed counters.
(iv) If the output device of the high-speed comparison instruction DHSCS requires high-speed output, it is
recommended you use Y10 or Y11 for the output. If you use other general devices, the output will delay
for 1 scan period for its setup or clearing. For example, if I0x0 interruption is set, C243 will correspond to
I020, C245 to I040, and C250 and C255 to I060.
(v) The high speed comparison instruction DHSCR is able to clear the counter, but only the counters used in

2-22

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
the same instruction, e.g. DHSCR K10 C243 C243. This function only applies to 4 special high-speed
counters C243, C245, C250 and C255.
5. Counting modes:
a) The 2-phase 2 inputs counting mode of the high speed counters in ES/EX/SS (V5.5 and versions above) and
SA/SX/SC series MPU is set by special D1022 with normal frequency, double frequency and 4 times
frequency modes. The contents in D1022 will be loaded in in the first scan when PLC is switched from STOP
to RUN.
Device No.

Function

D1022

Setting up the multiplied frequency of the counter

D1022 = K1

Normal frequency mode selected

D1022 = K2 or 0

Double frequency mode selected (default)

D1022 = K4

4 times frequency mode selected

b) Multiplied frequency mode (qr indicates the occurrence of counting)

1
(Normal
frequency)

Counting mode

Counting wave pattern
A-phase
B-phase

Counting down

A-phase

2
(Double
frequency)

2-phase 2 inputs

Counting up

B-phase

Counting up

Counting down

4
(4 times
frequency)

A-phase
B-phase

Counting up

Counting down

EH2/SV series MPU supports high speed counters. C235 ~ C240 are program-interruption 1-phase high speed
counter with a total bandwidth of 20kHz, can be used alone with a counting frequency of up to 10kHz. EH3/SV2 series
MPU supports high speed counters. C235~C240 are program-interruption 1-phase high speed counter, and can be
used with a counting frequency of up to 10kHz. C241 ~ C254 are hardware high speed counter (HHSC). There are
four HHSC in EH2/SV/EH3/SV2 series MPU, HHSC0 ~ 3. The pulse input frequency of HHSC0 and HHSC1 can
reach 200kHz, and that of HHSC2 and HHSC3 can reach 20kHz (1 phase) or 5kHz (A-B phase). The pulse input
frequency of HHSC0 ~ 3 of 40EH2/40EH3 series MPU can reach 200kHz, among which:
C241, C246 and C251 share HHSC0
C242, C247 and C252 share HHSC1
C243, C248 and C253 share HHSC2
DVP-PLC Application Manual

2-23

2 Functions of Devices in DVP-PLC
C244, C249 and C254 share HHSC3
1. Every HHSC can only be designated to one counter by DCNT instruction.
2. There are three counting modes in every HHSC (see the table below):
a) 1-phase 1 input refers to “pulse/direction” mode.
b) 1-phase 2 inputs refers to “clockwise/counterclockwise (CW/CCW)” mode.
c) 2-phase 2 inputs refers to “A-B phase” mode.
Program-interruption
high speed counter

Counter type

1-phase 1 input

Type
Input

Hardware high speed counter
1-phase 1 input

1-phase 2 inputs

2-phase 2 inputs

C235 C236 C237 C238 C239 C240 C241 C242 C243 C244 C246 C247 C248 C249 C251 C252 C253 C254

X0
X1

U/D

U/D
U/D

X2

U/D

X3

R
U/D

X4

S
U/D

X5

U

A

D

B

R

R

S
U/D

U/D

S
U

A

D

B

X6

R

R

R

X7

S

S

S

X10

U/D

U

X11

A

D

B

X12

R

R

R

X13

S

S

S

X14

U/D

X15

U

A

D

B

X16

R

R

R

X17

S

S

S

U: Progressively increasing input
B: Progressively decreasing input

A: A phase input
B: B phase input

S: Input started
R: Input cleared

3. System structure of the hardware high speed counters:
a)

HHSC0 ~ 3 have reset signals and start signals from external inputs. Settings in M1272, M1274, M1276 and
M1278 are reset signals of HHSC0, HHSC1, HHSC2 and HHSC3. Settings in M1273, M1275, M1277 and
M1279 are start signals of HHSC0, HHSC1, HHSC2 and HHSC3.

b)

If the external control signal inputs of R and S are not in use, you can set M1264/M1266/M1268/M1270 and
M1265/M1267/M1269/M1271 as True and disable the input signals. The corresponding external inputs can
be used again as general input points (see the figure below).

c) When special M is used as a high speed counter, the inputs controlled by START and RESET will be affected
by the scan time.

2-24

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
HHSC0 HHSC1 HHSC2 HHSC3
X0

X4

X10

X14

Counting pulses

U/D

Present value in counter

U

HHSC0

A

HHSC1

HHSC0 HHSC1 HHSC2 HHSC3
X1

X5

X11

X15

Counting pulses

Comparator

HHSC2

D

Counting reaches set value

HHSC3

B

DHSCS occupies 1 group of set values
DHSCR occupies 1 group of set values
Output reaches
comparative value DHSCZ occupies 2 groups of set values
for outputs

HHSC0 HHSC1 HHSC2 HHSC3
D1225

D1226

D1227

8 set values

Counting up/down
monitoring flag

D1228 Select counting m odes

Set values 1 ~ 4 indicate
Mode 1 ~ 4 (1 ~ 4 times frequency)
HHSC0 HHSC1 HHSC2 HHSC3 U/D mode setup flag
C241

C242

C243

C244

M1241

M1242

M1243

M1244

HHSC0 HHSC1 HHSC2 HHSC3
X2

X6

X12

X16

M1264

M1266

M1268

M1270

M1272

M1274

M1276

M1278

AND

M1251

HHSC1 M1247

M1252

HHSC2 M1248

M1253

DHSCR

HHSC3 M1249

M1254

DHSCZ

Reset signal R

OR

X3

X7

X13

X17

M1267

M1269

M1271

M1273

M1275

M1277

M1279

DHSCS

SET/RES ET
I 010 ~ I 060 clear
the present value

Interruption forbidden flag
I 010 M1289
I 020 M1290
I 030 M1291
I 040 M1292
I 050 M1293
I 060 M1294

HHSC0 HHSC1 HHSC2 HHSC3
M1265

High-speed Output reaches
comparative
instruction comparative value

HHSC0 M1246

AND

Start signal S

OR

4. Counting modes:
The counting modes of the hardware high-speed counters in EH2/SV/EH3/SV2 series MPU can be set in D1225 ~
D1228.
Counting modes
Type

1-phase
1 input

1-phase
2 inputs

2-phase
2 inputs

Wave pattern

Set value in
special D
1
(Normal
frequency)
2
(Double
frequency)

Counting up(+1)
U/D
U/D FLAG
U/D
U/D FLAG

1
(Normal
frequency)

U

2
(Double
frequency)

U

1
(Normal
frequency)

A

2
(Double
frequency)

A

3
(Triple
frequency)

A

4
(4 times
frequency)

A

DVP-PLC Application Manual

Counting down(-1)

D

D

B

B

B

B

2-25

2 Functions of Devices in DVP-PLC
5. Special registers for relevant flags and settings of high speed counters:
Flag

Function

M1150

DHSZ instruction in multiple set values comparison mode

M1151

The execution of DHSZ multiple set values comparison mode is completed.

M1152

Set DHSZ instruction as frequency control mode

M1153

DHSZ frequency control mode has been executed.
Designating the counting direction of high speed counters C235 ~ C245

M1235 ~ M1244

When M12□□ = Off, C2□□ will perform a counting up.
When M12□□ = On, C2□□ will perform a counting down.
Designating the counting direction of high speed counters C246 ~ C255

M1245~ M1255

When M12□□ = Off, C2□□ will perform a counting up.
When M12□□ = On, C2□□ will perform a counting down.

2-26

M1160

X5 as the reset input signal of all high speed counters

M1261

High-speed comparison flag for DHSCR instruction

M1264

Disable the external control signal input point of HHSC0 reset signal point (R)

M1265

Disable the external control signal input point of HHSC0 start signal point (S)

M1266

Disable the external control signal input point of HHSC1 reset signal point (R)

M1267

Disable the external control signal input point of HHSC1 start signal point (S)

M1268

Disable the external control signal input point of HHSC2 reset signal point (R)

M1269

Disable the external control signal input point of HHSC2 start signal point (S)

M1270

Disable the external control signal input point of HHSC3 reset signal point (R)

M1271

Disable the external control signal input point of HHSC3 start signal point (S)

M1272

Internal control signal input point of HHSC0 reset signal point (R)

M1273

Internal control signal input point of HHSC0 start signal point (S)

M1274

Internal control signal input point of HHSC1 reset signal point (R)

M1275

Internal control signal input point of HHSC1 start signal point (S)

M1276

Internal control signal input point of HHSC2 reset signal point (R)

M1277

Internal control signal input point of HHSC2 start signal point (S)

M1278

Internal control signal input point of HHSC3 reset signal point (R)

M1279

Internal control signal input point of HHSC3 start signal point (S)

M1289

High speed counter I010 interruption forbidden

M1290

High speed counter I020 interruption forbidden

M1291

High speed counter I030 interruption forbidden

M1292

High speed counter I040 interruption forbidden

M1293

High speed counter I050 interruption forbidden

M1294

High speed counter I060 interruption forbidden

M1312

C235 Start input point control (not supported by EH3/SV2)

M1313

C236 Start input point control (not supported by EH3/SV2)

M1314

C237 Start input point control (not supported by EH3/SV2)

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Flag

Function

M1315

C238 Start input point control (not supported by EH3/SV2)

M1316

C239 Start input point control (not supported by EH3/SV2)

M1317

C240 Start input point control (not supported by EH3/SV2)

M1320

C235 Reset input point control (not supported by EH3/SV2)

M1321

C236 Reset input point control (not supported by EH3/SV2)

M1322

C237 Reset input point control (not supported by EH3/SV2)

M1323

C238 Reset input point control (not supported by EH3/SV2)

M1324

C239 Reset input point control (not supported by EH3/SV2)

M1325

C240 Reset input point control (not supported by EH3/SV2)

M1328

Enable Start/Reset of C235 (not supported by EH3/SV2)

M1329

Enable Start/Reset of C236 (not supported by EH3/SV2)

M1330

Enable Start/Reset of C237 (not supported by EH3/SV2)

M1331

Enable Start/Reset of C238 (not supported by EH3/SV2)

M1332

Enable Start/Reset of C239 (not supported by EH3/SV2)

M1333

Enable Start/Reset of C240 (not supported by EH3/SV2)

D1022

Multiplied frequency of A-B phase counters for ES/EX/SS and SA/SX/SC
series MPU

D1150

Table counting register for DHSZ multiple set values comparison mode

D1151

Register for DHSZ instruction frequency control mode (counting by table)

D1152 (low word) In frequency control mode, DHSZ reads the upper and lower limits in the table
D1153 (high word) counting register D1153 and D1152.
D1166

D1167

Switching between rising/falling edge counting modes of X10 (for SC_V1.4
series MPU only)
Switching between rising/falling edge counting modes of X11 (for SC_V1.4
series MPU only)

D1225

The counting mode of the 1st group counters (C241, C246, C251)

D1226

The counting mode of the 2nd group counters (C242, C247, C252)

D1227

The counting mode of the 3rd group counters (C243, C248, C253)

D1228

The counting mode of the 4th group counters (C244, C249, C254)
Counting modes of HHSC0 ~ HHSC3 in EH2/SV/EH3/SV2 series MPU
(default = 2)

D1225 ~ D1228

1: Normal frequency counting mode
2: Double frequency counting mode
3: Triple frequency counting mode
4: 4 times frequency counting mode

DVP-PLC Application Manual

2-27

2 Functions of Devices in DVP-PLC
1-phase 1 input high-speed counter
Example:
LD

X10

RST

C241

LD

X11

OUT

M1241

LD

X12

DCNT

C241 K5

LD

C241

OUT

Y0

X10
RST

C241

X11
M1241
X12
DCNT

C241

K5

C241
Y0

1. X11 drives M1241 to determine whether C241 is an addition or subtraction counter.
2. When X10 is On, RST instsruction will be executed and the PV in C241 will be cleared to “0” and the contact will
be Off.
3. In C241, when X12 is On and C241 receives the signals from X0, the PV in the counter will count up (plus 1) or
count down (minus 1).
4. When the counting of C241 reaches SV K5, the contact of C241 will be On. If there are still input signals from X0,
the counting will continue.
5. C241 in ES/EX/SS and SA/SX/SC series MPU has external input signals to reset X1.
6. C241 in EH2/SV/EH3/SV2 series MPU has external input signals to reset X2 and start X3.
7. The external input contact of reset signal of C241 (HHSC0) in EH2/SV/EH3/SV2 series MPU is disabled by
M1264. The external input contact of start signal is disabled by M1265.
8. The internal input contact of reset signal of C241 (HHSC0) in EH2/SV/EH3/SV2 series MPU is disabled by M1272.
The internal input contact of start signal is disabled by M1273.
9. The counting modes (normal frequency or double frequency) of C246 (HHSC0) in EH2/SV/EH3/SV2 series MPU
can be set up by D1225. The default setting is double frequency mode.
Counting down
Contact X11, M1241

Counting up

X10
X12
X0
PV in C241

7
5

6

6

5
4

4
3

3
2

0

1
0
Contact Y0, C241

2-28

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
1-phase 2 inputs high-speed counter
Example:
LD

X10

RST

C246

LD

X11

DCNT

C246 K5

LD

C246

OUT

Y0

X10
RST

C246

DCNT

C246

X11
K5

C246
Y0

1. When X10 is On, RST instsruction will be
executed. The PV in C246 will be cleared to

X10

“0” and the output contact will be reset to be

X11

Off.
2. In C246, when X11 is On and C246 receives
the signals from X0, the PV in the counter will
count up (plus 1) or count down (minus 1).
3. When the counting of C246 reaches SV K5,
the contact of C246 will be On. If there are

X0
Counting up
X1
Counting down
7
PV in
C246

5

6

6

5
4

4
3

3

0

2

still input signals from X0, the counting will

1
0

continue.
4. C246 in EH2/SV/EH3/SV2 series MPU has

Contact Y0, C246

external input signals to reset X2 and start
X3.
5. The counting modes (normal frequency or double frequency) of C246 (HHSC0) in EH2/SV/EH3/SV2 series
MPU can be set up by D1225. The default setting is double frequency mode.
6. The external input contact of reset signal of C246 (HHSC0) in EH2/SV/EH3/SV2 series MPU is disabled by
M1264. The external input contact of start signal is disabled by M1265.
7. The internal input contact of reset signal of C246 (HHSC0) in EH2/SV/EH3/SV2 series MPU is disabled by
M1272. The internal input contact of start signal is disabled by M1273.
2-phase AB input high-speed counter
Example:

1.

LD

X10

RST

C251

LD

X11

DCNT

C251 K5

LD

C251

OUT

Y0

X10
RST

C251

DCNT

C251

X11
K5

C251
Y0

When X10 is On, RST instsruction will be executed. The PV in C251 will be cleared to “0” and the output contact
will be reset to be Off.

2.

In C251, when X11 is On and C251 receives the A-phase signals from X0 and B-phase signals from X1, the PV
in the counter will count up (plus 1) or count down (minus 1). You can select different counting modes if you use

DVP-PLC Application Manual

2-29

2 Functions of Devices in DVP-PLC
EH2/SV/EH3/SV2 series MPU.
3.

When the counting of C251 reaches SV K5, the contact of C251 will be On. If there are still input signals coming
in, the counting will continue.

4.

The counting modes (normal frequency, double frequency or 4 times frequency) of C251 (HHSC0) in ES/SA
series MPU can be set up by D1022. The default setting is double frequency mode.

5.

C251 in EH2/SV/EH3/SV2 series MPU has external input signals to reset X2 and start X3.

6.

The counting modes (normal frequency, double frequency, triple frequency or 4 times frequency) of C251
(HHSC0) in EH2/SV/EH3/SV2 series MPU can be set up by D1225. The default setting is double frequency
mode.

7.

The external input contact of reset signal of C246 (HHSC0) in EH2/SV/EH3/SV2 series MPU is disabled by
M1264. The external input contact of start signal is disabled by M1265.

8.

The internal input contact of reset signal of C246 (HHSC0) in EH2/SV/EH3/SV2 series MPU is disabled by
M1272. The internal input contact of start signal is disabled by M1273.

ES/EX/SS and SA/SX/SC series MPU (double frequency)
X10
X11
A-phase X0
B-phase X1
PV in C251
3
1

4

3

2

5

6

4

3

2

Counting down

Counting up

0

5

1
0

Contact Y0, C251

EH2/SV/EH3/SV2 series MPU (double frequency)
X10
X11
A-phase X0
B-phase X1
PV in C251
2

1
0

2

3

4

5

Counting up

6

5

4

3

2

Counting down

1
0

Contact Y0, C251

2-30

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
2.8

Numbering and Functions of Registers [D], [E], [F]

2.8.1 Data register [D]
A data register is for storing a 16-bit datum of values between -32,768 to +32,767. The highest bit is “+” or “-"
sign. Two 16-bit registers can be combined into a 32-bit register (D + 1; D of smaller No. is for lower 16 bits). The
highest b it is “+” or “-” sign and it can store a 32-bit datum of values between -2,147,483,648 to +2,147,483,647.
ES/EX/SS series MPU:

Data register D

General purpose

D0 ~ D407, 408 points

Latched

D408 ~ D599, 192 points. Fixed to be latched.

Special purpose

D1000 ~ D1143, 144 points. Some are latched.

Index register E, F

E, F, 2 points

Total
744 points

SA/SX/SC series MPU:

Data register D

General purpose

D0 ~ D199, 200 points. Fixed to be non-latched.

Latched

D200 ~ D999, D2000 ~ D4999, 3,800 points.
Can be modified to be non-latched by setting up parameter.

Special purpose

D1000 ~ D1999, 1,000 points. Some are latched.

Index register E, F

E0 ~ E3, F0 ~ F3, 8 points

File register

K0 ~ K1,599, MPU 1,600 points. Fixed to be latched.

Total
5,000
points
1,600
points

EH2/SV/EH3/SV2 series MPU:

Data register D

General purpose

D0 ~ D199, 200 points. Can be modified to be latched by setting up
parameters.

Latched

D200 ~ D999, D2000 ~ D9999, 8,800 points.
EH3/SV2: D200 ~ D999, D2000 ~ D11999, 10,800 points.
Can be modified to be non-latched by setting up parameters.

Special purpose

D1000 ~ D1999, 1,000 pints. Some are latched.

Index register E, F

E0 ~ E7, F0 ~ F7, 16 points.

File register

K0 ~ K9,999, MPU 10,000 points. Fixed to be latched.

Total
10,000
points

10,000
points

There are five types of registers:
1. General purpose register: When PLC goes from RUN to STOP or the power of the PLC is switched off, the data
in the register will be cleared to “0”. When M1033 = On and PLC goes from RUN to STOP, the data will not be
cleared, but will still be cleared to “0” when the power is off.
2. Latched register: When the power of PLC is switched off, the data in the register will not be cleared but will retain
at the value before the power is off. You can use RST or ZRST instruction to clear the data in the latched register.
3. Special purpose register: Every register of this kind has its special definition and purpose, mainly for storing the
system status, error messages and monitored status. See 2.10 and 2.11 for more details.
4. Index register E, F: The index register is a 16-bit register. There are 2 points of E, F in ES/EX/SS series MPU; 8
points (E0 ~ E3, F0 ~ F3) in SA/SX/SC series MPU; 16 points (E0 ~ E7, F0 ~ F7) in EH2/SV/EH3/SV2 series MPU.
If the index register is to be used as a 32-bit register, please designate E. When E is already designated in a
32-bit instruction, using also F will not be allowed.
5. File register: There are 1,600 file registers (K0 ~ K1,599) in SA/SX/SC series MPU and 10,000 file registers (K0
~ K9,999) in EH2/SV/EH3/SV2 series MPU. The file register does not have an exact device No.; therefore the
DVP-PLC Application Manual

2-31

2 Functions of Devices in DVP-PLC
read/write function of file registers has to be executed by instruction API 148 MEMR, API 149 MEMW or through
peripheral devices HPP and WPLSoft.
2.8.2 Index Register [E], [F]
Index registers E, F are 16-bit data registers and can be written and
16 bits

16 bits

F0

E0

read.
If you need to use a 32-bit register, you have to designate E. In this
case, F will be covered by E and cannot be used anymore; otherwise,

32 bits
F0

the content in E (32-bit) will be incorrect. We suggest you use DMOVP
K0 E instruction, the content in E (including F) will be cleared to “0”

E0

when the power of PLC is switched on.

Higher 16 bits Lower 16 bits

The combination of E, F when you use a 32-bit index register:
(F0, E0), (F1, E1), (F2, E2), …(F7, E7)

X0
MOV

K8

E0

MOV

K14

F0

MOV

D5E0

D10F0

When X0 = On, E0 = 8, F0 = 14, D5E0 = D (5 + 8) = D13, D10F0 = D
(10 + 14) = D24. At this moment, the content in D13 will be moved to
D24.

The index register is the same as normal operands, can be used for moving or comparison on word devicies (KnX,
KnY, KnM, KnS, T, C, D) and bit devices (X, Y, M, S). ES/SA series MPU does not support constant (K, H) index
register, but EH2/SV/EH3/SV2 series MPU supports constant (K, H) index register.
ES/EX/SS series MPU has 2 points of index registers E0, F0
SA/SX/SC series MPU has 8 points of index registers E0 ~ E3, F0 ~ F3
EH2/SV/EH3/SV2 series MPU has 16 points of index registers E0 ~ E7, F0 ~ F7
Some instructions do not support index registers. For how to use index register E, F to modify the operands, see
Chapter 5.4 for more details.
When you use the instruction mode in WPLSoft to generate constant (K, H) index register function, please use
symbol “@”. For example, “MOV K10@E0 D0F0”
When you use index register E, F to modify the operands, the modification range CANNOT exceed the range of
special purpose registers D1000 ~ D1999 and special auxiliary registers M1000 ~ M1999 in case errors may occur.
2.8.3 Functions and Features of File Registers
When the power of PLC is switched on, SA/SX/SC and EH2/SV/EH3/SV2 series MPU will check the following
devices:
1. M1101 (whether the file register is enabled)
2. D1101 (No. of file registers in SA/SX/SC series MPU: K0 ~ K1,599; No. of file registers in EH2/SV/EH3/SV2
series MPU: K0 ~ K9,999)
3. D1102 (Number of file registers to be read in SA/SX/SC series MPU: K0 ~ K1,600; number of file registers to be
2-32

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
read in EH2/SV/EH3/SV2 series MPU: K0 ~ K8,000)
4. D1103 (devices for storing the data read from file registers; the No. of designated data register D starts from
K2,000 ~ K9,999; determining whether to automatically send the content in the file register to the designated data
register.)
Note:
1. When D1101 of SA/SX/SC series MPU is bigger than 1,600, D1101 of EH2/SV/EH3/SV2 series MPU is bigger
than 8,000 and D1103 is smaller than 2,000 or bigger than 9,999, the data read from file registers will not be sent
to data register D.
2. When the program starts to send the data read from the file register to data register D and the address of the file
register or the data register D exceed their ranges, PLC will stop the reading.
3. There are 1,600 file registers in SA/SX/SC series MPU and 10,000 in EH2/SV/EH3/SV2 series MPU. The file
register does not have an exact device No.; therefore the read/write function of file registers has to be executed
by instruction API 148 MEMR, API 149 MEMW or through peripheral devices HPP and WPLSoft.
4. If you tend to read a file register with an address that is not within the range, the read value will be “0”.

2.9

Pointer [N], Pointer [P], Interruption Pointer [I]

ES/EX/SS series MPU:
N

For master control loop

N0 ~ N7, 8 points

Control point of master
control loop

P

For CJ, CALL instructions

P0 ~ P63, 64 points

Position pointer of CJ,
CALL

Pointer
I

Interruption

External interruption

I001, I101, I201, I301, 4 points

Timed interruption

I6□□, 1 point (□□=10 ~ 99, time base = 1ms) Position pointer of
(for V5.7)
interruption subroutine

Communication
interrupt

I150, 1 point

SA/SX/SC series MPU:
N

Master control loop

N0 ~ N7, 8 points

Control point of master
control loop

P

For CJ, CALL instructions

P0 ~ P255, 256 points

Position pointer of CJ,
CALL

External interruption

I001, I101, I201, I301, I401, I501, 6 points

Timer interruption

I6□□, I7□□, 2 points (□□ = 1 ~ 99, time
base = 1ms)

High-speed counter
interruption

I010, I020, I030, I040, I050, I060, 6 points

Communication
interruption

I150, 1 point

Pointer
I

Interruption

Position pointer of
interruption subroutine

Note: Among the 6 pairs of interruption No. (I001, I010), (I101, I020), (I201, I030), (I301, I040), (I401, I050), (I501, I060), only 1 No.
in the pair is allowed to be used in the program. If you use both No. in the pair and write them into the program, there may be
syntax errors occurring.

EH2/SV series MPU:
Pointer

N

Master control loop

N0 ~ N7, 8 points

Control point of master
control loop

P

For CJ, CALL instructions

P0 ~ P255, 256 points

Position pointer of CJ,
CALL

DVP-PLC Application Manual

2-33

2 Functions of Devices in DVP-PLC

External interruption

I00□(X0), I10□(X1), I20□(X2), I30□(X3), I40
□(X4), I50□(X5), 6 points
(□ = 1, rising-edge trigger
falling-edge trigger

Timed interruption
I

Interruption

, □ = 0,

)

I6□□, I7□□, 2 points (□□ = 1 ~ 99, time
base = 1ms)
I8□□, 1 point (□□ = 1 ~ 99, time base =
0.1ms)

High-speed counter
interruption

I010, I020, I030, I040, I050, I060, 6 points

Pulse interruption

I110, I120, I130, I140, 4 points

Communication
interruption

I150, I160, I170, 3 points

Position pointer of
interruption subroutine

Frequency
measurement card
I180, 1 point
triggered interruption

EH3/SV2 series MPU:
N

Master control loop

N0 ~ N7, 8 points

Control point of master
control loop

P

For CJ, CALL instructions

P0 ~ P255, 256 points

Position pointer of CJ,
CALL

External interruption

I00□(X0), I10□(X1), I20□(X2), I30□(X3),
I40□(X4), I50□(X5), I60□(X6), I70□(X7),
I90□(X10), I91□(X11), I92□(X12),
I93□(X13), I94□(X14), I95□(X15),
I96□(X16), I97□(X17), 16 points (□=1,
rising-edge trigger

Pointer

trigger
I

Interruption

, □=0, falling-edge

)

Timed interruption

I6□□, I7□□, 2 points (□□ = 2 ~ 99, time
base = 1ms)
I8□□, 1 point (□□ = 1 ~ 99, time base =
0.1ms)

High-speed counter
interruption

I010, I020, I030, I040, I050, I060, 6 points

Pulse interruption

I110, I120, I130, I140, 4 points

Communication
interruption

I150, I160, I170, 3 points

Position pointer of
interruption subroutine

Note: Input point X as a high-speed counter cannot be used as an external interruption signal. For example, if C251 occupies X0,
X1, X2 and X3, the external input interruption No. I00□(X0), I10□(X1), I20□(X2), and I30□(X3) cannot be used.

Pointer N: Used with MC and MCR instructions. MC is the master control start instruction. When MC instruction is
executer, the instructions between MC and MCR will still be executed normally. See Chapter 3 explanations on MC
and MCR instructions for more details.
Pointer P: Used with API 00 CJ, API 01 CALL and API 02 SRET. See Chapter 6 explanations on CJ, CALL and SRET
instructions for more details.

2-34

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
CJ Conditional Jump:
P**

X0
0

CJ

P1

When X0 = On, the program will jump from
address 0 to N (designated label P1) and keep
on the execution. The addresses in the middle

X1

will be ignored.

Y1

When X0 = Off, the program will execute from

X2
P1 N

Y2

address 0 and keep on executing. At this time,
CJ instruction will not be executed.

CALL Call Subroutine, SRET Subroutine Return:
When X0 = On, CALL instruction will be

P***

X0
20

CALL

P2

Call subroutine P***

X1
24

executed and the program will jump to P2 and
executed the designated subroutine. When

Y1

SRET instruction is executed, the program will
FEND
P2

return to address 24 and keep on the execution.

Y0
Subroutine P2
Y0
SRET

Subroutine return

END

Interruption Pointer I: Used with API 04 EI, API 05 DI, API 03 IRET. See Chapter 5.5 for more details. There are 6
types of interruption pointer. To insert an interruption, you have to combine the action with EI (enable interruption), DI
(disable interruption), IRET (interruption return) instructions.
1. External interruption: Due to the special hardware design inside the MPU, the input signals coming in at input
terminals X0 ~ X5 (EH3/SV2: X0~X17) when rising-edge or falling-edge triggers will not be affected by the scan
cycle. The currently executed program will be interrupted immediately and the execution will jump to the
designated interruption subroutine pointer I00□(X0), I10□(X1), I20□(X2), I30□(X3), I40□(X4), I50□(X5). Till
the execution reaches IRET instruction, the program will return to the original position and keep on its execution.
In SA/SX series MPU, X0 (pulse input point) works with X4 (external interruption point), corresponding to C235,
C251 and C253 work with I401, which will be able to interrupt and intercept the present value in the high-speed
counter. D1181 is the device to store the 32-bit value. X1 (pulse input point) works with X5 (external interruption
point), corresponding to C236 works with I501, which will be able to interrupt and intercept the present value in
the high-speed counter. D1198 and D1199 are the devices to store the 32-bit value.
In SC series MPU, X10 (pulse input point) works with X4 (external interruption point), corresponding to C243 and
C255 work with I401, which will be able to interrupt and intercept the present value in the high-speed counter.
D1180 and D1181 are the devices to store the 32-bit value. X11 works with X5, corresponding to C245 works with
I501, which will be able to interrupt and intercept the present value in the high-speed counter. D1198 and D1199
are the devices to store the 32-bit value.
2. Timed interruption: PLC automatically interrupts the currently executed program every a fixed period of time and
DVP-PLC Application Manual

2-35

2 Functions of Devices in DVP-PLC
jumps to the execution of a designated interruption subroutine.
3. Interruption when the counting reaches the target: The high-speed counter comparison instruction API 53
DHSCS can designates that when the comparison reaches the target, the currently executed program will be
interrupted and jump to the designated interruption subrountine executing the interruption pointers I010, I020,
I030, I040, I050 and I060.
4. Pulse interruption: The pulse output instruction API 57 PLSY can be set up that the interruption signal is sent out
synchronously when the first pulse is sent out by enabling flags M1342 and M1343. The corresponding
interruptions are I130 and I140. You can also set up that the interruption signal is sent out after the last pulse is
sent out by enabling flags M1340 and M1341. The corresponding interruptions are I110 and I120.
5. Communication interruption:
I150: When the communication instruction RS is being used, you can send out interruption request when the
program receives a specific word by interruption I150. The specific word is set up in the low byte of D1168. This
function can be adopted when the PLC receives data of different length during the connection with the
communication device. Set up the end word in D1168 and write the interruption subroutine I150 and when the
PLC receives this end word, the program will execute I150.
I160: RS instruction sends out interruption request when receiving a specific length of data. When the data
received equals the low byte of D1169, I160 will be triggered. When D1169 = 0, I160 will not be triggered.
I170: In Slave mode, interruption I170 will be generated when the data receiving is completed. Normally when the
communication terminal of the PLC is in Slave mode, PLC will not immediately process the communication data
entered but process it after the END is executed. Therefore, when the scan time is very long and you need the
communication data to be processed immediately, you can use interruption I170 for this matter.
6. Frequency measurement card triggered interruption:
I180: When the PLC sets up the frequency measurement card in mode 1 (pulse cycle measurement) and mode 3
(pulse number counting) by M1019 and D1034, I180 will be supported as well.

2.10

Special Auxiliary Relays and Special Data Registers

The types and functions of special auxiliary relays (special M) and special data registers (special D) are listed in the
table below. Please be noted that some devices of the same No. may bear different meanings in different series
MPUs. Special M and special D marked with “*” will be further illustrated in the 2.11. Columns marked with “R” regers
to “read only”, “R/W” refers to “read and write”, “-“ refers to the status remains unchanged and “#” refers to the system
will set it up according to the status of the PLC.

Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1000*

Monitoring normally open contact (A)

○

○

○

○

Off

On

Off

R

NO

Off

M1001*

Monitoring normally closed contact (B)

○

○

○

○

On

Off

On

R

NO

On

M1002*

Enabling positive pulses (On when RUN)

○

○

○

○

Off

On

Off

R

NO

Off

M1003*

Enabling negative pulses (Off when RUN)

○

○

○

○

On

Off

On

R

NO

On

M1004*

On when syntax errors occur

○

○

○

○

Off

Off

-

R

NO

Off

2-36

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1005*

Password of data backup memory card and
password of MPU do not match

╳

╳

○

○

Off

-

-

R

NO

Off

M1006*

Data backup memory card has not been
initialized

╳

╳

○

○

Off

-

-

R

NO

Off

M1007*

Data do not exist in the program area of data
backup memory card

╳

╳

○

○

Off

-

-

R

NO

Off

M1008*

Scanning watchdog timer (WDT) On

○

○

○

○

Off

Off

-

R

NO

Off

M1009

Insufficient 24V DC supply, LV signal has
been occurred.

○

○

○

○

Off

-

-

R

NO

Off

○

○

○

○

Off

-

-

R/W

NO

Off

M1010

ES/SA: PLSY Y0 mode selection, continuous
output when On
EH2/SV/EH3/SV2: Pulse output when
reaching END instruction

M1011*

10ms clock pulse, 5ms On/5ms Off

○

○

○

○

Off

-

-

R

NO

Off

M1012*

100ms clock pulse, 50ms On / 50ms Off

○

○

○

○

Off

-

-

R

NO

Off

M1013*

1s clock pulse, 0.5s On / 0.5s Off

○

○

○

○

Off

-

-

R

NO

Off

M1014*

1min clock pulse, 30s On / 30s Off

○

○

○

○

Off

-

-

R

NO

Off

M1015*

Enabling high-speed counter

╳

○

○

○

Off

-

-

R/W

NO

Off

M1016*

Displaying real time clock in A.D.

╳

○

○

○

Off

-

-

R/W

NO

Off

M1017*

±30 seconds correction on real time clock

╳

○

○

○

Off

-

-

R/W

NO

Off

M1018

Flag for radian/degree, On: for degree

╳

○

○

○

Off

-

-

R/W

NO

Off

M1019

Enabling frequency measurement card

╳

╳

○

○

Off

Off

-

R

NO

Off

M1020

Zero flag

○

○

○

○

Off

-

-

R

NO

Off

M1021

Borrow flag

○

○

○

○

Off

-

-

R

NO

Off

M1022

Carry flag

○

○

○

○

Off

-

-

R

NO

Off

M1023

PLSY Y1 mode selection, continuous output
when On

○

○

╳

╳

Off

-

-

R/W

NO

Off

M1024

Requesting COM1 monitoring

○

○

○

○

Off

-

-

R

NO

Off

M1025*

There is incorrect request for communication.

○

○

○

○

Off

-

-

R

NO

Off

M1026

Enabling RAMP module

╳

○

○

○

Off

-

-

R/W

NO

Off

M1027

Number of PR outputs

╳

○

○

○

Off

-

-

R/W

NO

Off

○

╳

╳

╳

Off

-

-

R/W

NO

Off

○

○

○

○

Off

-

-

R

NO

Off

10ms time switching flag.
M1028

Off: time base of T64 ~ T126 = 100ms
On: time base of T64 ~ T126 = 10ms

M1029*

ES/SA: Y0 pulse output of PLSY, PLSR
instructions is completed, or other relevant
instructions complete their executions.
EH2/SV/EH3/SV2: the 1st group pulse output

DVP-PLC Application Manual

2-37

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

○

○

○

○

Off

-

-

R

NO

Off

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

CH0 (Y0, Y1) is completed, or other relevant
instructions complete their executions.

M1030*

ES/SA: Y1 pulse output of PLSY, PLSR
instructions is completed, or other relevant
instructions complete their executions.
EH2/SV/EH3/SV2: the 2nd group pulse output
CH1 (Y2, Y3) is completed, or other relevant
instructions complete their executions.

M1031*

Clear all non-latched areas

○

○

○

○

Off

-

-

R/W

NO

Off

M1032*

Clear all latched areas

○

○

○

○

Off

-

-

R/W

NO

Off

M1033*

Memory latched when STOP

○

○

○

○

Off

-

-

R/W

NO

Off

M1034*

Disabling all Y outputs

○

○

○

○

Off

-

-

R/W

NO

Off

╳

○

○

○

-

-

-

R/W

YES

Off

EH2/SV/EH3/SV2: the 3rd group pulse output
CH2 (Y4, Y5) is completed. (Not available in
EH)

╳

╳

○

○

Off

-

-

R

NO

Off

SPD instruction is able to use X0 ~ X5 to
detect the flag (only available in SC_V1.4 and
versions above)

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

╳

╳

○

○

Off

-

-

R

NO

Off

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1035*

M1036*

Enabling input point X as the RUN/STOP
switch, corresponding to D1035
(SA designates X7 only; SX designates X3
only; SC designates X5 only)

th

M1037

M1038

EH2/SV/EH3/SV2: the 4 group pulse output
CH3 (Y6, Y7) is completed. (Not available in
EH)
Off: The time base of T200~T255 is 10ms.
On: The time base of T200~T255 is 1ms.

M1039*

Fixing time scan mode

○

○

○

○

Off

-

-

R/W

NO

Off

M1040

Disabling step

○

○

○

○

Off

-

-

R/W

NO

Off

M1041

Starting step

○

○

○

○

Off

-

Off

R/W

NO

Off

M1042

Enabling pulses

○

○

○

○

Off

-

-

R/W

NO

Off

M1043

Zero return completed

○

○

○

○

Off

-

Off

R/W

NO

Off

M1044

Zero point condition

○

○

○

○

Off

-

Off

R/W

NO

Off

M1045

Diabling all output reset

○

○

○

○

Off

-

-

R/W

NO

Off

M1046

Setting STL status as On

○

○

○

○

Off

-

-

R

NO

Off

M1047

Enabling STL monitoring

╳

○

○

○

Off

-

-

R/W

NO

Off

M1048

Alarm status

╳

○

○

○

Off

-

-

R

NO

Off

M1049

Setting up alarm monitoring

╳

○

○

○

Off

-

-

R/W

NO

Off

M1050

Inhibiting I001

○

○

╳

╳

Off

-

-

R/W

NO

Off

M1051

Inhibiting I101

○

○

╳

╳

Off

-

-

R/W

NO

Off

2-38

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES

SA

EX

SX

SS

SC

Inhibiting I201

○

○

╳

╳

Off

-

-

R/W

NO

Off

Inhibiting I301

○

○

╳

╳

Off

-

-

R/W

NO

Off

Enabling X4 speed detection

╳

╳

○

○

Off

Off

Off

R/W

NO

Off

Inhibiting I401

╳

○

╳

╳

Off

-

-

R/W

NO

Off

Enabling X10 speed detection

╳

╳

○

○

Off

Off

Off

R/W

NO

Off

Inhibiting I501

╳

○

╳

╳

Off

-

-

R/W

NO

Off

Enabling X14 speed detection

╳

╳

○

○

Off

Off

Off

R/W

NO

Off

Inhibiting I6□□

○

○

╳

╳

Off

-

-

R/W

NO

Off

Enabling X1 interrupt to get the counting value
╳
of C241

╳

╳

○

Off

Off

Off

R/W

NO

Off

Inhibiting I7□□

╳

○

╳

╳

Off

-

-

R/W

NO

Off

Enabling X2 interrupt to get the counting value
╳
of C241

╳

╳

○

Off

Off

Off

R/W

NO

Off

COM3 monitoring request

╳

╳

╳

○

Off

-

-

R/W

NO

Off

Inhibiting I010 ~ I060

╳

○

╳

╳

Off

-

-

R/W

NO

Off

Enabling X3 interrupt to get the counting value
╳
of C241

╳

╳

○

Off

Off

Off

R/W

否

Off

System error message 1: The peripheral
circuit of the CPU breaks down.

○

○

○

╳

Off

-

-

R

NO

Off

System error message 2: The CPU flag
register breaks down.

╳

○

○

╳

Off

-

-

R

NO

Off

System error message 2: An error occurs
when the data in the latched area is read.

○

╳

╳

╳

Off

-

-

R

NO

Off

M1062

System error message 3: The CPU BIOS
ROM breaks down.

○

○

○

╳

Off

-

-

R

NO

Off

M1063

System error message 4: The RAM in the
CPU breaks down.

○

○

○

╳

Off

-

-

R

NO

Off

M1064

Incorrect use of operands

○

○

○

○

Off

Off

-

R

NO

Off

M1065

Syntax error

○

○

○

○

Off

Off

-

R

NO

Off

M1066

Loop error

○

○

○

○

Off

Off

-

R

NO

Off

M1067*

Calculation error

○

○

○

○

Off

Off

-

R

NO

Off

M1068*

Calculation error locked (D1068)

○

○

○

○

Off

-

-

R

NO

Off

○

○

○

○

Off

-

-

R/W

NO

Off

╳

╳

○

○

Off

-

-

R/W

NO

Off

Special
M
M1052
M1053

M1054

M1055

M1056

M1057

M1058

M1059

M1060

M1061

Function

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

ES/SA: Y1 time base switching for PWM
instruction (On: 100us; Off: 1ms)
M1070

EH3/SV2: Y0 time base switching for PWM
instruction (On: 100us; Off: 1ms)
EH2/SV/EH3/SV2: when On, D1371 will
decide the time base)

M1071

Y2 time base switching for PWM instruction

DVP-PLC Application Manual

2-39

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

(On: 100us; Off: 1ms)
EH2/SV/EH3/SV2: when On, D1372 will
decide the time base)
M1072

Executing PLC RUN instruction

○

○

○

○

Off

On

Off

R/W

NO

Off

M1074

SRAM access error

╳

╳

○

○

Off

-

-

R

NO

Off

M1075

Error occurring when writing FLASH card or
Flash ROM

╳

╳

○

○

Off

-

-

R

NO

Off

M1076*

Real time clock malfunction

╳

○

○

○

Off

-

-

R

NO

Off

M1077

Battery in low voltage, malfunction or no
battery

╳

○

○

○

Off

-

-

R

NO

Off

M1078

Immediately stopping Y0 pulse output for
PLSY instruction

○

○

╳

╳

Off

-

-

R/W

NO

Off

M1079

Immediately stopping Y1 pulse output for
PLSY instruction

○

○

╳

╳

Off

-

-

R/W

NO

Off

M1080

Requesting COM2 monitoring

○

○

○

○

Off

-

-

R

NO

Off

M1081

Changing direction for FLT instruction

╳

○

○

○

Off

-

-

R/W

NO

Off

M1082

Real time clock has been changed

╳

○

○

○

Off

-

-

R

NO

Off

M1083

Allowing interruption subroutine in FROM/TO
instructions

╳

○

○

○

Off

-

-

R/W

NO

Off

M1084*

Detecting bandwidth (only available in
ES/EX/SS_V6.4, SA/SX_V1.6, SC_V1.4 and
versions above)

○

○

╳

╳

Off

Off

Off

R/W

NO

Off

M1085

Selecting DVP-PCC01 duplicating function

○

○

○

○

Off

-

-

R/W

NO

Off

M1086

Setting up the switch for enabling password
function of DVP-PCC01

○

○

○

○

Off

-

-

R/W

NO

Off

M1087*

Enabling LV signal

╳

╳

○

○

Off

-

-

R/W

NO

Off

╳

○

○

○

Off

Off

-

R/W

NO

Off

Matrix comparison.
M1088

Comparing between equivalent values
(M1088 = 1) or different values (M1088 = 0).

M1089

Matrix search end flag. When the comparison
reaches the last bit, M1089 = 1.

╳

○

○

○

Off

Off

-

R

NO

Off

M1090

Matrix search start flag. Comparing from bit 0
(M1090 = 1).

╳

○

○

○

Off

Off

-

R

NO

Off

M1091

Matrix bit search flag. When the comparison
is completed, the comparison will stop
immediately (M1091=1).

╳

○

○

○

Off

Off

-

R

NO

Off

M1092

Matrix pointer error flag. When the pointer Pr
exceeds its range, M1092 = 1.

╳

○

○

○

Off

Off

-

R

NO

Off

M1093

Matrix pointer increasing flag. Adding 1 to the
current value of the Pr.

╳

○

○

○

Off

Off

-

R/W

NO

Off

M1094

Matrix pointer clear flag. Clearing the current
value of the Pr to 0.

╳

○

○

○

Off

Off

-

R/W

NO

Off

2-40

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES

SA

EX

SX

SS

SC

Matrix rotation/displacement/output carry flag

╳

○

○

○

Off

Off

-

R

NO

Off

M1096

Matrix displacement/input complement flag

╳

○

○

○

Off

Off

-

R/W

NO

Off

M1097

Matrix rotation/displacement direction flag

╳

○

○

○

Off

Off

-

R/W

NO

Off

M1098

Matrix counting the number of bits which are
“1” or “0”

╳

○

○

○

Off

Off

-

R/W

NO

Off

M1099

On when the matrix counting result is “0”

╳

○

○

○

Off

Off

-

R/W

NO

Off

M1100

SPD instruction sampling once

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1101*

Whether to enable file registers

╳

○

○

○

-

-

-

R/W

Yes

Off

M1102*

Y10 pulse output ends (For SC)

╳

○

╳

╳

Off

-

-

R/W

NO

Off

M1103*

Y11 pulse output ends (For SC)

╳

○

╳

╳

Off

-

-

R/W

NO

Off

M1104*

Status of SW1 on digital switch card/AX0
input point on 4DI card (photpcoupler
isolation)

╳

╳

○

╳

Off

Off

-

R

NO

Off

M1105*

Status of SW2 on digital switch card/AX1
input point on 4DI card (photpcoupler
isolation)

╳

╳

○

╳

Off

Off

-

R

NO

Off

M1106*

Status of SW3 on digital switch card/AX2
input point on 4DI card (photpcoupler
isolation)

╳

╳

○

╳

Off

Off

-

R

NO

Off

M1107*

Status of SW4 on digital switch card/AX3
input point on 4DI card (photpcoupler
isolation)

╳

╳

○

╳

Off

Off

-

R

NO

Off

M1108*

Status of SW5 on digital switch card

╳

╳

○

╳

Off

Off

-

R

NO

Off

M1109*

Status of SW6 on digital switch card

╳

╳

○

╳

Off

Off

-

R

NO

Off

M1110*

Status of SW7 on digital switch card

╳

╳

○

╳

Off

Off

-

R

NO

Off

M1111*

Status of SW8 on digital switch card

╳

╳

○

╳

Off

Off

-

R

NO

Off

M1112*

AY0 output point on 2DO card (transistor)

╳

╳

○

╳

Off

-

Off

R/W

NO

Off

M1113*

AY1 output point on 2DO card (transistor)

╳

╳

○

╳

Off

-

Off

R/W

NO

Off

M1115*

Switch for enabling pulse
accelerating/decelerating output (not
available in SC_V1.4 and versions above)

○

○

╳

╳

Off

Off

Off

R/W

NO

Off

M1116*

Pulse output is accelerating (not available in
SC_V1.4 and versions above)

○

○

╳

╳

Off

Off

Off

R/W

NO

Off

M1117*

Accelerating/decelerating pulse output
reaches its target (not available in SC_V1.4
and versions above)

○

○

╳

╳

Off

Off

Off

R/W

NO

Off

M1118*

Pulse output is decelerating (not available in
SC_V1.4 and versions above)

○

○

╳

╳

Off

Off

Off

R/W

NO

Off

M1119*

Accelerating/decelerating pulse output is
completed (not available in SC_V1.4 and
versions above)

○

○

╳

╳

Off

Off

Off

R/W

NO

Off

Special
M

Function

M1095

DVP-PLC Application Manual

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

2-41

2 Functions of Devices in DVP-PLC
ES

SA

EX

SX

SS

SC

Using the instruction DDRVI/DDRVA to enable
╳
two target frequencies.

╳

○

○

Off

Off

Off

R/W

NO

Off

M1120*

Retaining the communication setting of COM2
(RS-485), modifying D1120 will be invalid
when M1120 is set.

○

○

○

○

Off

Off

-

R/W

NO

Off

M1121

Waiting for the sending of COM2 (RS-485)
communication data

○

○

○

○

Off

On

-

R

NO

Off

M1122

COM2 (RS-485) sending request

○

○

○

○

Off

Off

-

R/W

NO

Off

M1123

Receiving through COM2 (RS-485) is
completed

○

○

○

○

Off

Off

-

R/W

NO

Off

M1124

Waiting for receiving through COM2 (RS-485)

○

○

○

○

Off

Off

-

R

NO

Off

M1125

COM2 (RS-485) communication reset

○

○

○

○

Off

Off

-

R/W

NO

Off

M1126

Selecting COM2 (RS-485) STX/ETX user
defined or system defined

○

○

○

○

Off

Off

-

R/W

NO

Off

M1127

Sending/receiving data of COM2 (RS-485)
communication instruction is completed (RS
instruction not included)

○

○

○

○

Off

Off

-

R/W

NO

Off

M1128

Sending COM2 (RS-485)/receiving COM2
(RS-485) indication

○

○

○

○

Off

Off

-

R

NO

Off

M1129

COM2 (RS-485) receiving time-out

○

○

○

○

Off

Off

-

R/W

NO

Off

M1130

Selecting COM2 (RS-485) STX/ETX user
defined or system defined

○

○

○

○

Off

Off

-

R/W

NO

Off

M1131

On during COM2 (RS-485)
MODRD/RDST/MODRW data are converted
to hex data

○

○

○

○

Off

Off

-

R

NO

Off

M1132

On when there are no communication related
instructions in the program

○

○

○

○

Off

-

-

R

NO

On

╳

○

╳

╳

Off

Off

Off

R/W

NO

Off

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

╳

○

╳

╳

Off

Off

Off

R/W

NO

Off

Special
M

M1133*

Function

Enabling special high-speed pulse output Y0
(50kHz)
SC_V1.4 and versions above: 2-axis
synchronous control, enabling Y10 output

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

Special high-speed pulse output Y0 (50kHz)
M1134*

M1135*

On: continuous output
(Not available in SC_V1.4 and versions
above)
Special high-speed pulse output Y0 (50kHz)
reaches the target number of pulses.
SC_V1.4 and versions above: 2-axis
synchronous control, enabling Y11 output

M1136*

Retaining the communication setting of COM3

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1137

DNET mapping data are retained in STOP
status.

╳

╳

○

○

-

-

-

R/W

NO

Off

2-42

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Special
M

Function

M1138*

Retaining the communication setting of COM1
(RS-232), modifying D1036 will be invalid
when M1138 is set.

M1139*

Selecting ASCII or RTU mode of COM1
(RS-232) when in Slave mode

ES

SA

EX

SX

SS

SC

○

○

○

○

Off

-

-

R/W

NO

Off

○

○

○

○

Off

-

-

R/W

NO

Off

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

Off: ASCII; On: RTU
M1140

MODRD/MODWR/MODRW data receiving
error

○

○

○

○

Off

Off

-

R

NO

Off

M1141

MODRD/MODWR/MODRW parameter error

○

○

○

○

Off

Off

-

R

NO

Off

M1142

Data receiving of VFD-A commands error

○

○

○

○

Off

Off

-

R

NO

Off

○

○

○

○

Off

-

-

R/W

NO

Off

Selecting ASCII or RTU mode of COM2
(RS-485) when in Slave mode
Off: ASCII; On: RTU
M1143*

Selecting ASCII or RTU mode of COM2
(RS-485) when in Master mode (used
together with MODRD/ MODWR/MODRW
instructions)
Off: ASCII; On: RTU

M1144*

Switch for enabling adjustable pulse
accelerating/decelerating output Y0

╳

○

╳

╳

Off

Off

Off

R/W

NO

Off

M1145*

Adjustable pulse output Y0 is accelerating

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

M1146*

Adjustable pulse output Y0 reaches the target
frequency

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

M1147*

Adjustable pulse output Y0 is decelerating

╳

○

╳

╳

Off

Off

-

R

NO

Off

M1148*

Adjustable pulse output Y0 is completed

╳

○

╳

╳

Off

Off

Off

R/W

NO

Off

M1149*

Adjustable pulse output Y0 temporarily stops
counting the number of pulses.

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

M1150

DHSZ instruction in multiple set values
comparison mode

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1151

The execution of DHSZ multiple set values
comparison mode is completed.

╳

╳

○

○

Off

-

-

R

NO

Off

M1152

Setting up DHSZ instruction as frequency
control mode

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1153

DHSZ frequency control mode has been
executed.

╳

╳

○

○

Off

-

-

R

NO

Off

Enabling the deceleration function of
adjustable pulse output Y0

╳

○

╳

╳

Off

-

-

R/W

NO

Off

PWD bandwidth detection duty-off/duty-on

╳

╳

○

○

Off

Off

-

R/W

NO

Off

M1155

The instruction DCIMA or DCIMR enables the
automatic acceleration/deceleration.

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1156*

Enabling X0 interruption, immediate
deceleration and stopping CH0 high-speed
output (When M1156 is enabled and M1538 =
On, clear M1156 to send the remaining output

╳

╳

○

○

Off

Off

-

R/W

NO

Off

M1154*

DVP-PLC Application Manual

2-43

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

pulses.)

M1157*

Enabling X1 interruption, immediate
deceleration and stopping CH1 high-speed
output

╳

╳

○

○

Off

Off

-

R/W

NO

Off

M1158*

Enabling X2 interruption, immediate
deceleration and stopping CH2 high-speed
output

╳

╳

○

○

Off

Off

-

R/W

NO

Off

M1159*

Enabling X3 interruption, immediate
deceleration and stopping CH3 high-speed
output

╳

╳

○

○

Off

Off

-

R/W

NO

Off

M1160

SA/SX: X4, X5 bandwidth detection flag

╳

○

╳

╳

Off

Off

Off

R/W

NO

Off

○

○

○

○

Off

-

-

R/W

NO

Off

○

○

○

○

Off

-

-

R/W

NO

Off

M1161

M1162

8-bit mode
On: in 8-bit mode
Switching between decimal integer and binary
floating point for SCLP instruction
On: binary floating point; Off: decimal integer

M1163

Read/write memory card according to value in
D1063 (automatically Off once the execution
is completed)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1164

Read/write internal Flash ROM according to
value in D1064 (automatically Off once the
execution is completed)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1165

When On, the program and password on flash
╳
will be copied to the PLC when PLC is
powered. (Not available in EH2)

╳

○

╳

-

-

-

R/W

YES

Off

M1166

When On, the recipe on flash will be copied to
the PLC when PLC is powered. (Not available
in EH2)

╳

╳

○

╳

-

-

-

R/W

YES

Off

M1167

16-bit mode for HKY input

╳

○

○

○

Off

-

-

R/W

NO

Off

M1168

Designating work mode of SMOV

╳

○

○

○

Off

-

-

R/W

NO

Off

M1169

Selecting PWD modes

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1170*

Enabling single step execution

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1171*

Single step execution

╳

╳

○

○

Off

-

-

R/W

NO

Off

╳

○

╳

Off

Off

Off

R/W

NO

Off

Off

-

-

R/W

NO

Off

Off

Off

-

R/W

NO

Off

M1172*

Switch for 2-phase pulse output
On: switch on

╳

╳

M1173*

On: continuous output

╳

○

╳

M1174*

The number of output pulses reaches the
target

╳

○

╳

M1175

Losing PLC parameter data (not available in
EH2)

╳

╳

○

○

-

-

-

R

YES

Off

M1176

Losing the data in PLC program (not available
in EH2)

╳

╳

○

○

-

-

-

R

YES

Off

M1178*

Enabling VR0 rotary switch

╳

○

○

○

Off

-

-

R/W

NO

Off

M1179*

Enabling VR1 rotary switch

╳

○

○

○

Off

-

-

R/W

NO

Off

2-44

╳

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

╳

╳

╳

○

#

-

-

R/W

NO

#

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

Enabling X2 interruption (I201) followed by
immediately clearing X0 high-speed counting
input value.
M1181

PS1: Only supports SA/SX_V1.8 and versions
above.
PS2: After the high-speed counting value is
obtained, the high-speed counting present
value will be cleared immediately.

M1182

Enabling X3 interruption (I301) followed by
immediately clearing X1 high-speed counting
input value.
PS1: Only supports SA/SX_V1.8 and versions
above.

M1182

PS2: After the high-speed counting value is
obtained, the high-speed counting present
value will be cleared immediately.
On: The automatic matchimg read/write
function of the special module is enabled.

M1183

PS1: Matching D11800~
PS2: The right side module should support
this function.

M1184*

Enabling modem function (not available in
SV)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1185*

Enabling initialization of modem (not available
in SV)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1186*

Initialization of modem fails (not available in
SV)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1187*

Initialization of modem is completed (not
available in SV)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1188*

Displaying whether modem is connecting
currently (not available in SV)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1189

Read/write of Memory card/Flash ROM
completed flag (Automatically reset to Off
every time when enabled)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1190

Enabling PLSY for Y0 high-speed output of
0.01 ~ 500Hz

╳

╳

○

○

Off

Off

-

R/W

NO

Off

M1191

Enabling PLSY for Y2 high-speed output of
0.01 ~ 500Hz

╳

╳

○

○

Off

Off

-

R/W

NO

Off

M1192

Enabling PLSY for Y4 high-speed output of
0.01 ~ 500Hz

╳

╳

○

○

Off

Off

-

R/W

NO

Off

M1193

Enabling PLSY for Y6 high-speed output of
0.01 ~ 500Hz

╳

╳

○

○

Off

Off

-

R/W

NO

Off

╳

╳

○

○

Off

Off

-

R/W

NO

Off

M1194

I40X, I50X interruptions is able to immediately
update the present pulse output value at CH0.
Available in EH2_V1.4 and versions above,

DVP-PLC Application Manual

2-45

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

╳

╳

○

○

Off

Off

-

R/W

NO

Off

╳

○

╳

╳

Off

-

-

R/W

NO

Off

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

EH2-L, EH3, and SV2

M1195

M1196

I40X, I50X interruptions is able to immediately
update the present pulse output value at CH1.
Available in EH2_V1.4 and versions above,
EH2-L EH3, and SV2
Setting up the content type in the display (for
SX)
On: hex; Off: decimal

M1197

Setting up the display of the 100ths digit (for
SX)

╳

○

╳

╳

Off

-

-

R/W

NO

Off

M1198

Setting up the display of the 10ths digit (for
SX)

╳

○

╳

╳

Off

-

-

R/W

NO

Off

M1200

Counting mode of C200 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1201

Counting mode of C201 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1202

Counting mode of C202 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1203

Counting mode of C203 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1204

Counting mode of C204 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1205

Counting mode of C205 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1206

Counting mode of C206 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1207

Counting mode of C207 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1208

Counting mode of C208 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1209

Counting mode of C209 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1210

Counting mode of C210 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1211

Counting mode of C211 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1212

Counting mode of C212 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1213

Counting mode of C213 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1214

Counting mode of C214 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1215

Counting mode of C215 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1216

Counting mode of C216 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1217

Counting mode of C217 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1218

Counting mode of C218 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1219

Counting mode of C219 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1220

Counting mode of C220 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1221

Counting mode of C221 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1222

Counting mode of C222 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1223

Counting mode of C223 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

2-46

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES

SA

EX

SX

SS

SC

Counting mode of C224 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1225

Counting mode of C225 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1226

Counting mode of C226 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1227

Counting mode of C227 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1228

Counting mode of C228 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1229

Counting mode of C229 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1230

Counting mode of C230 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1231

Counting mode of C231 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1232

Counting mode of C232 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1233

Counting mode of C233 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1234

Counting mode of C234 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1235

Counting mode of C235 (On: counting down)

○

○

○

○

Off

-

-

R/W

NO

Off

M1236

Counting mode of C236 (On: counting down)

○

○

○

○

Off

-

-

R/W

NO

Off

M1237

Counting mode of C237 (On: counting down)

○

○

○

○

Off

-

-

R/W

NO

Off

M1238

Counting mode of C238 (On: counting down)

○

○

○

○

Off

-

-

R/W

NO

Off

M1239

Counting mode of C239 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1240

Counting mode of C240 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1241

Counting mode of C241 (On: counting down)

○

○

○

○

Off

-

-

R/W

NO

Off

M1242

Counting mode of C242 (On: counting down)

○

○

○

○

Off

-

-

R/W

NO

Off

M1243

Counting mode of C243 (On: counting down)

╳

○

○

○

Off

-

-

R/W

NO

Off

M1244

Counting mode of C244 (On: counting down)

○

○

○

○

Off

-

-

R/W

NO

Off

M1245

Counting mode of C245 (On: counting down)

╳

○

╳

╳

Off

-

-

R/W

NO

Off

M1246

C246 counter monitoring (On: counting down)

○

○

○

○

Off

-

-

R

NO

Off

M1247

C247 counter monitoring (On: counting down)

○

○

○

○

Off

-

-

R

NO

Off

M1248

C248 counter monitoring (On: counting down)

╳

╳

○

○

Off

-

-

R

NO

Off

M1249

C249 counter monitoring (On: counting down)

○

○

○

○

Off

-

-

R

NO

Off

M1250

C250 counter monitoring (On: counting down)

╳

○

╳

╳

Off

-

-

R

NO

Off

M1251

C251 counter monitoring (On: counting down)

○

○

○

○

Off

-

-

R

NO

Off

M1252

C252 counter monitoring (On: counting down)

○

○

○

○

Off

-

-

R

NO

Off

M1253

C253 counter monitoring (On: counting down)

╳

╳

○

○

Off

-

-

R

NO

Off

M1254

C254 counter monitoring (On: counting down)

○

○

○

○

Off

-

-

R

NO

Off

M1255

C255 counter monitoring (On: counting down)

╳

○

╳

╳

Off

-

-

R

NO

Off

M1257

The acceleration/deceleration of The
high-speed pulse output Y0 and Y2 is an S
curve.

╳

╳

○

○

Off

Off

-

R

NO

Off

Special
M

Function

M1224

DVP-PLC Application Manual

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

2-47

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1258

Y0 pulse output signal reversing for PWM
instruction

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1259

Y2 pulse output signal reversing for PWM
instruction

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1260

X5 as the reset input signal for all high-speed
counters

╳

○

╳

Off

-

-

R/W

NO

Off

M1261

High-speed comparator comparison flag for
DHSCR instruction

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1262

Enabling the instruction DPTPO to output the
circulatory pulse output.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1264

Enabling reset function of HHSC0

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1265

Enabling start function of HHSC0

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1266

Enabling reset function of HHSC1

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1267

Enabling start function of HHSC1

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1268

Enabling reset function of HHSC2

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1269

Enabling start function of HHSC2

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1270

Enabling reset function of HHSC3

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1271

Enabling start function of HHSC3

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1272

Reset control of HHSC0

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1273

Start control of HHSC0

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1274

Reset control of HHSC1

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1275

Start control of HHSC1

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1276

Reset control of HHSC2

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1277

Start control of HHSC2

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1278

Reset control of HHSC3

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1279

Start control of HHSC3

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1280

Inhibiting I00□

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1281

Inhibiting I10□

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1282

Inhibiting I20□

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1283

Inhibiting I30□

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1284

Inhibiting I40□

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1285

Inhibiting I50□

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1286

Inhibiting I6□□

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1287

Inhibiting I7□□

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1288

Inhibiting I8□□

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1289

Inhibiting I010

╳

╳

○

○

Off

-

-

R/W

NO

Off

2-48

╳

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1290

Inhibiting I020

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1291

Inhibiting I030

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1292

Inhibiting I040

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1293

Inhibiting I050

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1294

Inhibiting I060

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1295

Inhibiting I110

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1296

Inhibiting I120

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1297

Inhibiting I130

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1298

Inhibiting I140

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1299

Inhibiting I150

╳

○

○

○

Off

-

-

R/W

NO

Off

M1300

Inhibiting I160

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1301

Inhibiting I170

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1302

Inhibiting I180

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1303

High/low bits exchange for XCH instruction

╳

○

○

○

Off

-

-

R/W

NO

Off

M1304*

Enabling set On/Off of MPU input point X

○

○

○

○

Off

-

-

R/W

NO

Off

M1305

Reverse operation of the 1st group pulse CH0
(Y0, Y1) for
PLSV/DPLSV/DRVI/DDRVI/DRVA/DDRVA
instruction

╳

╳

○

○

Off

-

-

R

NO

Off

M1306

Reverse operation of the 2nd group pulse CH1
(Y2, Y3) for
PLSV/DPLSV/DRVI/DDRVI/DRVA/DDRVA
instruction

╳

╳

○

○

Off

-

-

R

NO

Off

M1307

The instruction ZRN enables the negative
limit switch.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

╳

╳

○

○

Off

Off

Off

R/W

NO

Off

╳

╳

○

○

Off

Off

Off

R/W

NO

Off

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

╳

╳

○

○

Off

Off

Off

R/W

NO

Off

╳

○

╳

╳

Off

Off

-

R/W

NO

Off

M1308

M1309

M1310*

M1310*

M1311*

Off->On: The 1st pulse group CH0 (Y0, Y1)
high-speed output immediately stops.
On->Off: Completing remaining number of
output pulses
Off->On: The 1st pulse group CH1 (Y2, Y3)
high-speed output immediately stops.
On->Off: Completing remaining numbe of
output pulses
Immediately disabling Y10 pulse output (for
SC_V1.4 and versions above)
Off->On: The 1st pulse group CH2 (Y4, Y5)
high-speed output immediately stops.
On->Off: Completing remaining numbe of
output pulses
Disabling Y11 pulse output (for SC_V1.4 and
versions above)

DVP-PLC Application Manual

2-49

2 Functions of Devices in DVP-PLC
ES

SA

EX

SX

SS

SC

╳

╳

○

○

Off

Off

Off

R/W

NO

Off

Controlling start input point of C235

╳

╳

○

╳

Off

-

-

R/W

NO

Off

Sending reuqest of COM1 (RS-232)
communication instruction (only available in
the instructions MODRW and RS)

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

Controlling start input point of C236

╳

╳

○

╳

Off

-

-

R/W

NO

Off

Waiting to receive the data of COM1 (RS-232)
communication instruction is completed (only
available in the instructions MODRW and RS)

╳

╳

╳

○

Off

Off

-

R

NO

Off

Controlling start input point of C237

╳

╳

○

╳

Off

-

-

R/W

NO

Off

Receiving the data of COM1 (RS-232)
communication instruction is completed (only
available in the instructions MODRW and RS)

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

Controlling start input point of C238

╳

╳

○

╳

Off

-

-

R/W

NO

Off

An error occurs when receiving the data of
COM1 (RS-232) communication instruction
(only available in the instructions MODRW
and RS)

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

Controlling start input point of C239

╳

╳

○

╳

Off

-

-

R/W

NO

Off

Sending reuqest of COM3 (RS-485)
communication instruction (only available in
the instructions MODRW and RS)

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

Controlling start input point of C240

╳

╳

○

╳

Off

-

-

R/W

NO

Off

Waiting to receive the data of COM3 (RS-485)
communication instruction is completed (only
available in the instructions MODRW and RS)

╳

╳

╳

○

Off

Off

-

R

NO

Off

M1318

Receiving data of COM3 (RS-485)
communication instruction is completed (only
available in the instructions MODRW and RS)

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1319

An error occurs when receiving the data of
COM3 (RS-485) communication instruction
(only available in the instructions MODRW
and RS)

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

Controlling reset input point of C235

╳

╳

○

╳

Off

-

-

R/W

NO

Off

╳

╳

╳

○

Off

-

-

R/W

NO

Off

Special
M

Function

Off->On: The 1st pulse group CH3 (Y6, Y7)
high-speed output immediately stops.
On->Off: Completing remaining numbe of
output pulses

M1312

M1313

M1314

M1315

M1316

M1317

M1320

SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

Slave mode: COM3 (RS-485) is in the
ASCII/RTU mode. (Off: ASCII mode; On: RTU
mode)
Master mode: COM3 (RS-485) is in the
ASCII/RTU mode. (Off: Off: ASCII mode; On:
RTU mode) M1320 is used with the
instruction MODRW/FWD.

2-50

EH2 EH3

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1321

Controlling reset input point of C236

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1322

Controlling reset input point of C237

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1323

Controlling reset input point of C238

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1324

Controlling reset input point of C239

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1325

Controlling reset input point of C240

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1328

Enabling start/reset of C235

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1329

Enabling start/reset of C236

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1330

Enabling start/reset of C237

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1331

Enabling start/reset of C238

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1332

Enabling start/reset of C239

╳

╳

○

╳

Off

-

-

R/W

NO

Off

M1333

Enabling start/reset of C240

╳

╳

○

╳

Off

-

-

R/W

NO

Off

╳

○

○

○

Off

-

-

R/W

NO

Off

╳

○

○

○

Off

-

-

R/W

NO

Off

M1334*

M1335*

EH2/SV/EH3/SV2: stopping the 1st group
pulse output CH0 (Y0, Y1)
SC_V1.4 and versions above: selecting Y10
pulse output stop modes
EH2/SV/EH3/SV2: stopping the 2nd group
pulse output CH1 (Y2, Y3)
SC_V1.4 and versions above: selecting Y11
pulse output stop modes

M1336

Sending out the 1st group pulse output CH0
(Y0, Y1)

╳

╳

○

○

Off

Off

Off

R

NO

Off

M1337

Sending out the 2nd group pulse output CH1
(Y2, Y3)

╳

╳

○

○

Off

Off

Off

R

NO

Off

M1338

Enabling offset pulses of the 1st group pulse
output CH0 (Y0, Y1)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1339

Enabling offset pulses of the 2nd group pulse
output CH1 (Y2, Y3)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1340

Generating interruption I110 after the 1st
group pulse output CH0 (Y0, Y1) is sent out

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1341

Generating interruption I120 after the 2nd
group pulse output CH1 (Y2, Y3) is sent out

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1342

Generating interruption I130 when the 1st
group pulse output CH0 (Y0, Y1) is sent out

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1343

Generating interruption I140 when the 2nd
group pulse output CH1 (Y2, Y3) is sent out

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1344

Enabling the offset of the 1st group pulse
output CH0 (Y0, Y1)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1345

Enabling the offset of the 2nd group pulse
output CH1 (Y2, Y3)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1346

Enabling ZRN CLEAR output signal

╳

╳

○

○

Off

-

-

R/W

NO

Off

DVP-PLC Application Manual

2-51

2 Functions of Devices in DVP-PLC
Special
M

M1347

M1348

Function

EH2/SV/EH3/SV2: Reset after the 1st group
pulse output CH0 (Y0, Y1) is completed.
SA/SX/SC: Automatic zero return after Y0
high-speed pulse output is completed.
EH2/SV/EH3/SV2: Reset after the 2nd group
pulse output CH1 (Y2, Y3) is completed.
SA/SX/SC: Automatic zero return after Y1
high-speed pulse output is completed.

ES

SA

EX

SX

SS

SC

╳

○

○

○

Off

-

-

R/W

NO

Off

╳

○

○

○

Off

-

-

R/W

NO

Off

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1350*

Enabling PLC LINK

╳

○

○

○

Off

-

-

R/W

NO

Off

M1351*

Enabling auto mode on PLC LINK

╳

○

○

○

Off

-

-

R/W

NO

Off

M1352*

Enabling manual mode on PLC LINK

╳

○

○

○

Off

-

-

R/W

NO

Off

M1353*

Enable 32 slave unit linkage and up to 100
data length of data exchange on PLC LINK

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1354*

Enable simultaneous data read/write in a
polling of PLC LINK

╳

○

○

○

Off

-

-

R/W

NO

Off

M1355

When M1355 = Off, enable PLC LINK for
slave connection detection. When M1355 =
On, M1360 ~ M1375 (M1440 ~ M1455) will be
the flag designating connection, not for slave
connection detection.

╳

○

○

○

Off

-

-

R/W

NO

Off

M1356

When the PLC link is enabled and M1356 is
ON, the values in D1900~D1931 are taken as
the station address. The default station
address in D1399 is not used.

╳

╳

╳

○

-

-

-

R/W

NO

Off

M1360*

Slave ID#1 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1361*

Slave ID#2 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1362*

Slave ID#3 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1363*

Slave ID#4 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1364*

Slave ID#5 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1365*

Slave ID#6 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1366*

Slave ID#7 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1367*

Slave ID#8 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1368*

Slave ID#9 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1369*

Slave ID#10 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1370*

Slave ID#11 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1371*

Slave ID#12 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1372*

Slave ID#13 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1373*

Slave ID#14 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1374*

Slave ID#15 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

M1375*

Slave ID#16 status on PLC LINK network

╳

○

○

○

Off

-

-

R

NO

Off

2-52

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES

SA

EX

SX

SS

SC

Indicating Slave ID#1 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1377*

Indicating Slave ID#2 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1378*

Indicating Slave ID#3 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1379*

Indicating Slave ID#4 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1380*

Indicating Slave ID#5 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1381*

Indicating Slave ID#6 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1382*

Indicating Slave ID#7 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1383*

Indicating Slave ID#8 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1384*

Indicating Slave ID#9 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1385*

Indicating Slave ID#10 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1386*

Indicating Slave ID#11 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1387*

Indicating Slave ID#12 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1388*

Indicating Slave ID#13 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1389*

Indicating Slave ID#14 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1390*

Indicating Slave ID#15 data transaction status
╳
on PLC LINK

○

○

○

Off

-

-

R

NO

Off

M1391*

Indicating Slave ID#16 data transaction status
on PLC LINK

╳

○

○

○

Off

-

-

R

NO

Off

M1392*

Slave ID#1 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1393*

Slave ID#2 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1394*

Slave ID#3 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1395*

Slave ID#4 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1396*

Slave ID#5 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1397*

Slave ID#6 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1398*

Slave ID#7 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1399*

Slave ID#8 linking error

╳

○

○

○

Off

-

-

R

NO

Off

Special
M

Function

M1376*

DVP-PLC Application Manual

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

2-53

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1400*

Slave ID#9 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1401*

Slave ID#10 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1402*

Slave ID#11 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1403*

Slave ID#12 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1404*

Slave ID#13 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1405*

Slave ID#14 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1406*

Slave ID#15 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1407*

Slave ID#16 linking error

╳

○

○

○

Off

-

-

R

NO

Off

M1408*

Indicating reading from Salve ID#1 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1409*

Indicating reading from Salve ID#2 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1410*

Indicating reading from Salve ID#3 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1411*

Indicating reading from Salve ID#4 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1412*

Indicating reading from Salve ID#5 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1413*

Indicating reading from Salve ID#6 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1414*

Indicating reading from Salve ID#7 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1415*

Indicating reading from Salve ID#8 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1416*

Indicating reading from Salve ID#9 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1417*

Indicating reading from Salve ID#10 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1418*

Indicating reading from Salve ID#11 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1419*

Indicating reading from Salve ID#12 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1420*

Indicating reading from Salve ID#13 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1421*

Indicating reading from Salve ID#14 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1422*

Indicating reading from Salve ID#15 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

M1423*

Indicating reading from Salve ID#16 is
completed

╳

○

○

○

Off

-

-

R

NO

Off

2-54

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES

SA

EX

SX

SS

SC

Indicating writing to Salve ID#1 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1425*

Indicating writing to Salve ID#2 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1426*

Indicating writing to Salve ID#3 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1427*

Indicating writing to Salve ID#4 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1428*

Indicating writing to Salve ID#5 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1429*

Indicating writing to Salve ID#6 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1430*

Indicating writing to Salve ID#7 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1431*

Indicating writing to Salve ID#8 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1432*

Indicating writing to Salve ID#9 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1433*

Indicating writing to Salve ID#10 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1434*

Indicating writing to Salve ID#11 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1435*

Indicating writing to Salve ID#12 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1436*

Indicating writing to Salve ID#13 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1437*

Indicating writing to Salve ID#14 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1438*

Indicating writing to Salve ID#15 is completed

╳

○

○

○

Off

-

-

R

NO

Off

M1439*

Indicating writing to Salve ID#16 is completed

╳

○

○

○

Off

-

-

R

NO

Off

╳

╳

○

╳

M1440*

Slave ID#17 status on PLC LINK network

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

M1441*

Slave ID#18 status on PLC LINK network

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

M1442*

Slave ID#19 status on PLC LINK network

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

M1443*

Slave ID#20 status on PLC LINK network

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

M1444*

Slave ID#21 status on PLC LINK network

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

M1445*

Slave ID#22 status on PLC LINK network

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

M1446*

Slave ID#23 status on PLC LINK network

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

M1447*

Slave ID#24 status on PLC LINK network

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

M1448*

Slave ID#25 status on PLC LINK network

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

M1449*

Slave ID#26 status on PLC LINK network

╳

╳

○

╳

Off

-

-

R

NO

Off

Special
M

Function

M1424*

DVP-PLC Application Manual

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

2-55

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

╳

Off

-

-

R

NO

Off

╳

╳

╳

○

-

-

-

R

Yes

Off

╳

╳

○

Off

-

-

R

NO

Off

╳

╳

╳

-

-

-

R

Yes

Off

╳

╳

○

Off

-

-

R

NO

Off

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1450*

Slave ID#27 status on PLC LINK network

M1451*

Slave ID#28 status on PLC LINK network

M1452

Slave ID#29 status on PLC LINK network

M1453*

Slave ID#30 status on PLC LINK network

M1454*

Slave ID#31 status on PLC LINK network

M1455*

Slave ID#32 status on PLC LINK network

╳

╳

╳

○

-

-

-

R

Yes

Off

M1456*

Indicating Slave ID#17 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1457*

Indicating Slave ID#18 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1458*

Indicating Slave ID#19 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1459*

Indicating Slave ID#20 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1460*

Indicating Slave ID#21 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1461*

Indicating Slave ID#22 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1462*

Indicating Slave ID#23 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1463*

Indicating Slave ID#24 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1464*

Indicating Slave ID#25 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1465*

Indicating Slave ID#26 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1466*

Indicating Slave ID#27 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1467*

Indicating Slave ID#28 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1468*

Indicating Slave ID#29 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1469*

Indicating Slave ID#30 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

2-56

○

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES

SA

EX

SX

SS

SC

M1470*

Indicating Slave ID#31 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1471*

Indicating Slave ID#32 data transaction status
╳
on PLC LINK

╳

○

○

Off

-

-

R

NO

Off

M1472*

Slave ID#17 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1473*

Slave ID#18 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1474*

Slave ID#19 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1475*

Slave ID#20 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1476*

Slave ID#21 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1477*

Slave ID#22 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1478*

Slave ID#23 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1479*

Slave ID#24 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1480*

Slave ID#25 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1481*

Slave ID#26 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1482*

Slave ID#27 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1483*

Slave ID#28 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1484*

Slave ID#29 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1485*

Slave ID#30 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1486*

Slave ID#31 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1487*

Slave ID#32 linking error

╳

╳

○

○

Off

-

-

R

NO

Off

M1488*

Indicating reading from Salve ID#17 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1489*

Indicating reading from Salve ID#18 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1490*

Indicating reading from Salve ID#19 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1491*

Indicating reading from Salve ID#20 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1492*

Indicating reading from Salve ID#21 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1493*

Indicating reading from Salve ID#22 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1494*

Indicating reading from Salve ID#23 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1495*

Indicating reading from Salve ID#24 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1496*

Indicating reading from Salve ID#25 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

Special
M

Function

DVP-PLC Application Manual

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

2-57

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1497*

Indicating reading from Salve ID#26 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1498*

Indicating reading from Salve ID#27 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1499*

Indicating reading from Salve ID#28 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1500*

Indicating reading from Salve ID#29 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1501*

Indicating reading from Salve ID#30 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1502*

Indicating reading from Salve ID#31 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1503*

Indicating reading from Salve ID#32 is
completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1504*

Indicating writing to Salve ID#17 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1505*

Indicating writing to Salve ID#18 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1506*

Indicating writing to Salve ID#19 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1507*

Indicating writing to Salve ID#20 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1508*

Indicating writing to Salve ID#21 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1509*

Indicating writing to Salve ID#22 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1510*

Indicating writing to Salve ID#23 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1511*

Indicating writing to Salve ID#24 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1512*

Indicating writing to Salve ID#25 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1513*

Indicating writing to Salve ID#26 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1514*

Indicating writing to Salve ID#27 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1515*

Indicating writing to Salve ID#28 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1516*

Indicating writing to Salve ID#29 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1517*

Indicating writing to Salve ID#30 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1518*

Indicating writing to Salve ID#31 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1519*

Indicating writing to Salve ID#32 is completed

╳

╳

○

○

Off

-

-

R

NO

Off

M1520

rd
EH2/SV/EH3/SV2: stopping the 3 group
pulse output CH2 (Y4, Y5) (Not available in
EH)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1521

th
EH2/SV/EH3/SV2: stopping the 4 group
pulse output CH3 (Y6, Y7) (Not available in
EH)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1522

rd
EH2/SV/EH3/SV2: sending out the 3 group
pulse output CH2 (Y4, Y5) (Not available in
EH)

╳

╳

○

○

Off

-

Off

R

NO

Off

2-58

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Special
M

M1523

M1524

Function

th
EH2/SV/EH3/SV2: sending out the 4 group
pulse output CH3 (Y6, Y7) (Not available in
EH)

EH2/SV/EH3/SV2: reset after the 3rd group
pulse output CH2 (Y4, Y5) is completed (Not
available in EH)

ES

SA

EX

SX

SS

SC

╳

╳

○

○

Off

-

Off

R

NO

Off

╳

○

○

○

Off

-

-

R/W

NO

Off

╳

○

○

○

Off

-

-

R/W

NO

Off

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

SC: reset after Y10 high-speed pulse output is
completed

M1525

EH2/SV/EH3/SV2: reset after the 4th group
pulse output CH3 (Y6, Y7) is completed (Not
available in EH)
SC: reset after Y11 high-speed pulse output is
completed

M1526

EH2/SV/EH3/SV2: reversing Y4 pulse output
signal for PWM instruction (Not available in
EH)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1527

EH2/SV/EH3/SV2: reversing Y6 pulse output
signal for PWM instruction (Not available in
EH)

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1528

Enabling the instruction DICF to execute the
constant speed output section

╳

╳

╳

○

Off

Off

Off

R/W

NO

Off

M1529

Enabling the instruction DICF to execute the
final output section

╳

╳

╳

○

Off

Off

Off

R/W

NO

Off

╳

╳

○

○

Off

-

-

R/W

NO

Off

╳

╳

○

○

Off

-

-

R/W

NO

Off

M1532

EH2/SV/EH3/SV2: reverse operation of the 3rd
group pulse CH2 (Y4, Y5) for
╳
PLSV/DPLSV/DRVI/DDRVI/DRVA /DDRVA
instruction (Not available in EH)

╳

○

○

Off

-

-

R/W

NO

Off

M1533

EH2/SV/EH3/SV2: reverse operation of the 4th
group pulse CH3 (Y6, Y7) for
╳
PLSV/DPLSV/DRVI/DDRVI/DRVA /DDRVA
instruction

╳

○

○

Off

-

-

R/W

NO

Off

M1534

EH2/SV/EH3/SV2: CH0 being able to
designate deceleration time. Has to be used
with D1348.

╳

╳

○

○

Off

-

-

R/W

NO

M1535

EH2/SV/EH3/SV2: CH1 being able to
designate deceleration time. Has to be used
with D1349.

╳

╳

○

○

Off

-

-

R/W

NO

M1536

EH2/SV/EH3/SV2: CH2 being able to
designate deceleration time. Has to be used
with D1350.

╳

╳

○

○

Off

-

-

R/W

NO

M1530

EH2/SV/EH3/SV2: switching time base unit of
Y4 output for PWM instruction
On: 100us; Off: 1ms (Not available in EH)

M1531

EH2/SV/EH3/SV2: switching time base unit of
Y6 output for PWM instruction
On: 100us; Off: 1ms (Not available in EH)

DVP-PLC Application Manual

Off

Off

Off

2-59

2 Functions of Devices in DVP-PLC
ES

SA

EX

SX

SS

SC

EH2/SV/EH3/SV2: CH3 being able to
designate deceleration time. Has to be used
with D1351.

╳

╳

○

○

Off

-

-

R/W

M1538*

Displaying CH0 high-speed output paused
flag

╳

╳

○

○

Off

Off

-

R/W

M1539*

Displaying CH1high-speed output paused flag

╳

╳

○

○

Off

Off

-

R/W

M1540*

Displaying CH2 high-speed output paused
flag

╳

╳

○

○

Off

Off

-

R/W

M1541*

Displaying CH3 high-speed output paused
flag

╳

╳

○

○

Off

Off

-

R/W

M1542

CH0 executes the function that the constant
speed output section reaches the target
frequency.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1543

CH0 executed the function that the constant
speed output section reaches the target
number.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1544

CH1 executes the function that the constant
speed output section reaches the target
frequency.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1545

CH1 executed the function that the constant
speed output section reaches the target
number.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1546

CH2 executes the function that the constant
speed output section reaches the target
frequency.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1547

CH2 executed the function that the constant
speed output section reaches the target
number.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1548

CH3 executes the function that the constant
speed output section reaches the target
frequency.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1549

CH3 executed the function that the constant
speed output section reaches the target
number.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1550

Used with the instruction DCIF to clear the
high-speed output couting number

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1560

Inhibiting I900 and I901

╳

╳

╳

○

Off

-

-

R/W

NO

Off

M1561

Inhibiting I910 and I911

╳

╳

╳

○

Off

-

-

R/W

NO

Off

M1562

Inhibiting I920 and I921

╳

╳

╳

○

Off

-

-

R/W

NO

Off

M1563

Inhibiting I930 and I931

╳

╳

╳

○

Off

-

-

R/W

NO

Off

M1564

Inhibiting I940 and I941

╳

╳

╳

○

Off

-

-

R/W

NO

Off

M1565

Inhibiting I950 and I951

╳

╳

╳

○

Off

-

-

R/W

NO

Off

M1566

Inhibiting I960 and I961

╳

╳

╳

○

Off

-

-

R/W

NO

Off

Special
M

Function

M1537

2-60

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP
NO
NO
NO
NO
NO

Off

Off
Off
Off
Off

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Special
M

Function

ES

SA

EX

SX

SS

SC

EH2 EH3
SV SV2

Off STOP RUN
Ø

Ø

Ø

Attribute Latched

Default

On RUN STOP

M1567

Inhibiting I970 and I971

╳

╳

╳

○

Off

-

-

R/W

NO

Off

M1570

Enabling the negative limit function of the
high-speed output CH0

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1571

Enabling the negative limit function of the
high-speed output CH1

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1572

Enabling the negative limit function of the
high-speed output CH2

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1573

Enabling the negative limit function of the
high-speed output CH3

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1574

The DOG of CH0 in the instruction ZRN is
positive stop function.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1575

The DOG of CH1 in the instruction ZRN is
positive stop function.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1576

The DOG of CH2 in the instruction ZRN is
positive stop function.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1577

The DOG of CH3 in the instruction ZRN is
positive stop function.

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

╳

╳

╳

○

Off

Off

-

R/W

NO

Off

M1578

Off: Number of times the instruction ZRN
search for the Z phase
On: The output designates the displacement.
The flag is used with D1312.

DVP-PLC Application Manual

2-61

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

D1000*

Scanning watchdog timer (WDT) (Unit: ms)

D1001

Displaying the program version of
DVP-PLC (initial factory setting)

EH2 EH3
SV SV2

○ ○

○

○

○ ○

○

○

EH2
ES/S
A

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

200

-

-

#

#

#

-

-

-

R/W

NO

200

R

NO

#

Program capacity
D1002*

# -> EH2:15,872; SA: 7,920; ES: 3,792;
EH3/SV2: 30000

○ ○

○

○

#

-

-

R

NO

#

Sum of program memory
D1003

# -> EH2: -15,873; SA: -7,920; ES: -3,792;
EH3/SV2: -30000

○ ○

○

○

-

-

-

R

YES

#

D1004*

Syntax check error code

○ ○

○

○

0

0

-

R

NO

0

D1007

Number of times the low voltage of the battery is
recorded (EH2 and V1.8 above)

╳ ╳

○

○

-

-

-

R

Yes

0

D1008*

STSC address when WDT is On

○ ○

○

○

0

-

-

R

NO

0

○ ○

○

○

-

-

-

R

YES

0

D1009

ES/SA: recording number of occurrances of LV
signals
EH2/SV/EH3/SV2: register for SRAM lost data
error code

D1010*

Current scan time (Unit: 0.1ms)

○ ○

○

○

0

-

-

R

NO

0

D1011*

Minimum scan time (Unit: 0.1ms)

○ ○

○

○

0

-

-

R

NO

0

D1012*

Maximum scan time (Unit: 0.1ms)

○ ○

○

○

0

-

-

R

NO

0

D1015*

0~32,767 (unit: 0.1ms) accumulative high-speed
timer

╳ ○

○

○

0

-

-

R/W

NO

0

D1018*

πPI (low byte)

○ ○

○

○

H’0FDB H’0FDB H’0FDB

R/W

NO

H’0FDB

D1019*

πPI (high byte)

○ ○

○

○

H’4049

H’4049 H’4049

R/W

NO

H’4049

D1020*

X0 ~ X7 input filter (Unit: ms); modulation range:
2~20ms

○ ○

○

○

10

-

-

R/W

NO

10

○ ○

○

○

10

-

-

R/W

NO

10

○ ○

╳

╳

0

-

-

R/W

NO

0

ES/EH/EH2/SV: X10 ~ X17 input filter (Unit: ms)
D1021*

D1022

SC: X10 ~ X17 input filter (time base: scan
cycle), range: 0 ~ 1,000 (Unit: times)
Multiplied frequency of A-B phase counters for
ES/SA
Register for detected pulse width, Unit: 0.1ms

D1023*

(Available in ES/EX/SS_V6.4, SA/SX_V1.6,
SC_V1.4 and versions above)

○ ○

╳

╳

0

-

-

R/W

NO

0

D1025*

Code for communication request error

○ ○

○

○

0

-

-

R

NO

0

D1026*

When ≠ 0, enabling DRVI, PLSR
instructions to work with X0 mask
interruption

╳ ╳

○

○

0

0

--

R/W

NO

0

╳ ╳

○

○

0

0

--

R/W

NO

0

D1027*

2-62

Low
word
High
word

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1028

Index register E0

○ ○

○

○

0

-

-

R/W

NO

0

D1029

Index register F0

○ ○

○

○

0

-

-

R/W

NO

0

D1030*

Number of Y0 output pulses (low word)

○ ○

╳

╳

0

-

-

R

NO

0

D1031*

Number of Y0 output pulses (high word)

○ ○

╳

╳

0

-

-

R

NO

0

D1032

Number of Y1 output pulses (low word)

○ ○

╳

╳

0

-

-

R/W

NO

0

D1033

Number of Y0 output pulses (high word)

○ ○

╳

╳

0

-

-

R/W

NO

0

D1034

Work mode of frequency measurement card

╳ ╳

○

○

-

-

-

R

YES

1

D1035*

No. of input point X as RUN/STOP

╳ ╳

○

○

-

-

-

R/W

YES

0

D1036*

COM1 communication protocol

○ ○

○

○ H’86

-

-

R/W

NO

H’86

D1037

Repetition time of HKY key

╳ ╳

○

○

-

-

-

R/W

NO

0

Delay time of data response when PLC MPU as
slave in RS-485 communication, range: 0 ~
10,000 (unit: 0.1ms)
D1038*

SA: delay time for sending the next
communication data in PLC LINK (unit for
SA/SX/SC: 1 scan cycle; EH2/SV/EH3/SV2:
0.1ms)

○ ○

○

○

-

-

-

R/W

YES

0

D1039*

Fixed scan time (ms)

○ ○

○

○

0

-

-

R/W

NO

0

D1040

On status of step No. 1

╳ ○

○

○

0

-

-

R

NO

0

D1041

On status of step No. 2

╳ ○

○

○

0

-

-

R

NO

0

D1042

On status of step No. 3

╳ ○

○

○

0

-

-

R

NO

0

D1043

On status of step No. 4

╳ ○

○

○

0

-

-

R

NO

0

D1044

On status of step No. 5

╳ ○

○

○

0

-

-

R

NO

0

D1045

On status of step No. 6

╳ ○

○

○

0

-

-

R

NO

0

D1046

On status of step No. 7

╳ ○

○

○

0

-

-

R

NO

0

D1047

On status of step No. 8

╳ ○

○

○

0

-

-

R

NO

0

D1049

No. of alarm On

╳ ○

○

○

0

-

-

R

NO

0

D1050

Process of data for Modbus communication
instruction. PLC automatically converts the
ASCII data in D1070 ~ D1085 in to hex data.

○ ○

○

○

0

-

-

R

NO

0

D1056*

Present value at analog input channel CH0 in
SX/EX or at CH0 on AD card in EH2/EH3/SV2

○ ○

○

○

0

-

-

R

NO

0

D1057*

Present value at analog input channel CH1 in
SX/EX or at CH1 on AD card in EH2/EH3/SV2

○ ○

○

○

0

-

-

R

NO

0

Present value at analog input channel CH2 in EX ○ ╳

╳

╳

0

-

-

R

NO

0

Enabling X1 interrupt tp get the counting value of
╳ ╳
C241 (M1056 is On)-Low word

╳

○

0

0

-

R

NO

0

Present value at analog input channel CH3 in EX ○ ╳

╳

╳

0

-

-

R

NO

0

Enabling X1 interrupt tp get the counting value of ╳ ╳

╳

○

0

0

-

R

NO

0

↓
D1055

D1058*

D1059*

DVP-PLC Application Manual

2-63

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

C241 (M1056 is On)-High word
D1061

System error message: number of errors
recorded in latched area

○ ╳

╳

╳

-

-

-

R

YES

0

D1062

Average times of AD0, AD1 in SX (2 ~ 4 times)

╳ ○

╳

╳

2

-

-

R/W

NO

2

╳ ╳

○

○

0

-

-

R/W

NO

0

╳ ╳

○

○

0

-

-

R/W

NO

0

PLC reads/writes all programs (and password)
and all latched data in the memory card.
PLC reads all programs (and password) in the
memory card: H55AA
D1063*

PLC writes all programs (and password) in the
memory card: HAA55
PLC reads all latched data in the memory card:
H55A9
PLC writes all latched data in the memory card:
HA955
PLC reads/writes all programs (and password)
and recipe in the internal FLASH ROM.

D1064*

PLC reads FLASH: H55AA; PLC writes FLASH:
HAA55
H55A9/ H99AB/ HA955/ HAB55/ H8888 are
added in EH3/SV2.

D1067*

Error code for operational error

○ ○

○

○

0

0

-

R

NO

0

D1068*

Locking the address of operational error

○ ○

○

○

0

-

-

R

NO

0

Process of data for Modbus communication
instruction. When the RS-485 communication
instruction built-in the PLC sent out is received,
the response messages will be stored in D1070
~ D1085. You can view the response messages
by checking these registers.

○ ○

○

○

0

-

-

R

NO

0

D1086

High word of the set password in DVP-PCC01
(displayed in hex corresponded by its ASCII
characters)

○ ○

○

○

0

-

-

R/W

NO

0

D1087

Low word of the set password in DVP-PCC01
(displayed in hex corresponded by its ASCII
characters)

○ ○

○

○

0

-

-

R/W

NO

0

Process of data for Modbus communication
instruction. When the RS-485 communication
instruction built-in the PLC is executed, the
○ ○
words of the instruction will be stored in D1089 ~
D1099. You can check whether the instruction is
correct by the contents in these registers.

○

○

0

-

-

R

NO

0

D1100

Corresponding status after LV signal is enabled

╳ ╳

○

○

0

-

-

R/W

NO

0

D1101*

Start address of file registers

╳ ○

○

○

-

-

-

R/W

YES

0

D1102*

Number of data copied in file register

╳ ○

○

○

-

-

-

R/W

YES

1,600

D1103*

Start No. of file register D for storing data (has to
╳ ○
be bigger than 2,000)

○

○

-

-

-

R/W

YES

2,000

D1070
↓
D1085

D1089
↓
D1099

2-64

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

D1104*

Start No. of register D for Y0 acceleration/
deceleration pulse output (Not available in
SC_V1.4 and versions above)

○ ○

╳

╳

D1109*

COM3 communication protocol setting (for
EH2/EH3/SV2)

╳ ╳

○

D1110*

Average value at analog input channel CH0 in
SX/EX or at CH0 on AD card in EH2/EH3/SV2

○ ○

D1111*

Average value at analog input channel CH1 in
SX/EX or at CH1 on AD card in EH2/EH3/SV2

Off STOP RUN
Ø
On

Ø

Attribute Latched

Default

RUN STOP
-

-

R/W

NO

0

○ H86

-

-

R/W

NO

H86

○

○

0

-

-

R

NO

0

○ ○

○

○

0

-

-

R

NO

0

D1112*

Average value at analog input channel CH2 in EX ○ ╳

╳

╳

0

-

-

R

NO

0

D1113*

Average value at analog input channel CH3 in EX ○ ╳

╳

╳

0

-

-

R

NO

0

○ ○

○

○

0

0

0

R/W

NO

0

○ ○

○

○

0

0

0

R/W

NO

0

○ ○

○

○

5

-

-

R/W

NO

5

D1116*

D1117*

D1118*

CH0 of analog output in SX/EX
CH0 of DA card in EH2/EH3/SV2
CH1 of analog output in SX/EX
CH1 of DA card in EH2/EH3/SV2
Sampling time of analog/digital converstion in
SX/EX/EH2/EH3/SV2 (ms)
PS1: Only when the AD/DA card is in
EH2/EH3/SV2 is the function supported.

0

Ø

D1120*

COM2 (RS-485) communication protocol

○ ○

○

○ H’86

-

-

R/W

NO

H’86

D1121

PLC communication address (latched)

○ ○

○

○

-

-

-

R/W

YES

1

D1122

Remaining number of words of sent data

○ ○

○

○

0

0

-

R

NO

0

D1123

Remaining number of words of received data

○ ○

○

○

0

0

-

R

NO

0

D1124

Definition of start word (STX)

○ ○

○

○ H’3A

-

-

R/W

NO

H’3A

D1125

Definition of the first end word

○ ○

○

○ H’0D

-

-

R/W

NO

H’0D

D1126

Defunition of the second end word

○ ○

○

○ H’0A

-

-

R/W

NO

H’0A

Interruption request for receiving specific word in
○ ╳
RS instruction (I150)

╳

╳

0

-

-

R/W

NO

0

Number of pulses in the acceleration area of the
positioning instruction (Low word)

╳ ╳

○

○

0

-

-

R

NO

0

D1128

Number of pulses in the acceleration area of the
positioning instruction (High word)

╳ ╳

○

○

0

-

-

R

NO

0

D1129

Abnormal communication time-out (time: ms)

○ ○

○

○

0

-

-

R/W

NO

0

D1130

Error code returning from Modbus

○ ○

○

○

0

-

-

R

NO

0

Low 16 bytes of high-speed counter value
extracted by interruption I501

╳ ○

╳

╳

0

-

-

R

NO

0

╳ ╳

○

○

100

-

-

R/W

NO

100

╳ ○

╳

╳

0

-

-

R

NO

0

D1127

D1131*

Output/input ratio of CH0 close-loop control
(for EH2/SV/EH3/SV2)

D1132*

High 16 bytes of high-speed counter value
extracted by interruption I501

DVP-PLC Application Manual

2-65

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

Output/input ratio of CH1 close-loop control

Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

○

○

100

-

-

R/W

NO

100

╳ ○

╳

╳

0

-

-

R/W

NO

0

Number of pulses in the deceleration area of the
positioning instruction (Low word)

╳ ╳

○

○

0

-

-

R

NO

0

Number of sections in Y10 output for 2-axis
synchronous control (available in SC_V1.4 and
versions above)

╳ ○

╳

╳

0

-

-

R/W

NO

0

Number of pulses in the deceleration area of the
positioning instruction (High word)

╳ ╳

○

○

0

-

-

R

NO

0

SC_V1.4 and versions above: start No. of register
╳ ○
D for Y11 2-axis synchronous control output

╳

╳

0

-

-

R/W

NO

0

╳ ╳

╳

○

0

-

-

R/W

NO

0

╳ ○

╳

╳

0

-

-

R/W

NO

0

╳ ╳

╳

○

0

-

-

R/W

NO

0

SA/SX: start No. of register D for Y0 special
high-speed pulse output (50kHz)

D1134*

SV SV2

Off STOP RUN

╳ ╳

(for in EH2/SV/EH3/SV2)

D1133*

EH2 EH3

SC_V1.4 and versions above: start No. of register
D for Y10 2-axis synchronous control output

Pulse number for masking Y2 (Low word)
D1135*

When M1158 = ON and the pulse number for
masking Y2 is not 0, enabling Y2 in the
instruction DDRVI/DPLSR and masking X6
interrupt.
Number of sections in Y11 output for 2-axis
synchronous control (available in SC_V1.4 and
versions above)

D1136*

Pulse number for masking Y2 (High word)
When M1158 = ON and the pulse number for
masking Y2 is not 0, enabling Y2 in the
instruction DDRVI/DPLSR and masking X6
interrupt

D1137*

Address where incorrect use of operand occurs

○ ○

○

○

0

0

-

R

NO

0

D1140*

Number of right-side special extension modules
(max. 8)

○ ○

○

○

0

-

-

R

NO

0

D1142*

Number of points X in digital extension unit

○ ○

○

○

0

-

-

R

NO

0

D1143*

Number of points Y in digital extension unit

○ ○

○

○

0

-

-

R

NO

0

╳ ○

╳

╳

0

-

-

R/W

NO

0

╳ ╳

○

╳

0

-

-

R

NO

0

╳ ╳

○

○

0

-

-

R

NO

0

╳ ╳

○

○

0

-

-

R

NO

0

D1144*

D1145*

SA: Start No. of register D for Y0 adjustable
acceleration/deceleration pulse output
EH2/SV: The instruction DRVI calculates in
advance the value in the data register for Y0.
Number of left-side special extension modules
(max. 8) (only available in SV)
Type of memory card
b0 = 0: no card existing (H0000)

D1147

b0 = 1: with memory card
b8 = 0: memory card Off (HFFFF)
b8 = 1: memory card On (H0101)

D1149

2-66

Type of function extension card

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

0: no card
1: RS-232 card, DU-01
2: RS-422 card
3: COM3 card
4: analog rotary switch card
5: digital switch card
6: transistor output card
8: 2AD card
9: 2DA card
10: frequency measurement card
D1150

Table count register in multi-group setting
comparison mode of DHSZ commnad

╳ ╳

○

○

0

0

0

R

NO

0

D1151

Table counting register for DHSZ multiple set
values comparison mode

╳ ╳

○

○

0

0

0

R

NO

0

D1152

High word of changed D value for DHSZ
instruciton

╳ ╳

○

○

0

0

0

R

NO

0

D1153

Low word of changed D value for DHSZ
instruction

╳ ╳

○

○

0

0

0

R

NO

0

Suggested deceleration time interval (10 ~
32,767ms) for adjustable
acceleration/deceleration pulse output Y0

╳ ○

╳

╳

200

-

-

R/W

NO

200

Pulse number for masking Y4 (Low word)

╳ ╳

○

○

0

0

-

R/W

NO

0

Suggested deceleration frequency (-1 ~
-32,700Hz) for adjustable
acceleration/deceleration pulse output Y0

╳ ○

╳

╳

-1,00

-

-

R/W

NO

-1,000

Pulse number for masking Y4 (High word)

╳ ╳

○

○

0

0

-

R/W

NO

0

Designated special D for RTMU, RTMD
instructions

╳ ╳

○

○

0

-

-

R/W

NO

0

D1166*

Switching rising-/falling-edge counting mode of
X10 (available in SC_V1.4 and versions above)

╳ ○

╳

╳

0

-

-

R/W

NO

0

D1167*

Switching rising-/falling-edge counting mode of
X11 (available in SC_V1.4 and versions above)

╳ ○

╳

╳

0

-

-

R/W

NO

0

D1168

Interruption request for receiving specific word in
╳ ○
RS instruction (I150)

○

○

0

-

-

R/W

NO

0

D1169

Interruption request for receiving specific word in
╳ ╳
RS instruction (I160)

○

○

0

-

-

R/W

NO

0

D1170*

PC value when executing single step

╳ ╳

○

○

0

0

0

R

NO

0

D1172*

Frequency of 2-phase pulse output (12Hz ~
20kHz)

╳ ○

╳

╳

0

-

-

R/W

NO

0

Modes of 2-phase pulse output (K1 and K2)

╳ ○

╳

╳

0

-

-

R/W

NO

0

X4 speed detecting value

╳ ╳

○

○

0

0

-

R/W

NO

0

D1154*

D1155*

D1156
↓
D1165

D1173*

DVP-PLC Application Manual

0

2-67

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

Low 16 bits of target numbers of 2-phase output
pulses

╳ ○

╳

╳

0

-

-

R/W

NO

0

X10 speed detecting time

╳ ╳

○

○

0

0

-

R/W

NO

0

High 16 bits of target numbers of 2-phase output
pulses

╳ ○

╳

╳

0

-

-

R/W

NO

0

X10 speed detecting value

╳ ╳

○

○

0

0

-

R/W

NO

0

Low 16 bits of current numbers of 2-phase output
╳ ○
pulses

╳

╳

0

-

-

R/W

NO

0

X14 speed detecting time

╳ ╳

○

○

0

0

-

R/W

NO

0

High 16 bits of current numbers of 2-phase
output pulses

╳ ○

╳

╳

0

-

-

R/W

NO

0

X14 speed detecting value

╳ ╳

○

○

0

0

-

R/W

NO

0

D1178*

VR0 value

╳ ○

○

○

0

-

-

R

NO

0

D1179*

VR1 value

╳ ○

○

○

0

-

-

R

NO

0

╳ ○

╳

╳

0

0

-

R/W

NO

0

╳ ╳

╳

○

0

0

-

R

NO

0

╳ ○

╳

╳

0

0

-

R/W

NO

0

Enabling X2 to get the counting value of the
high-speed counter C241 (M1057 is On)(High
word)

╳ ╳

╳

○

0

0

-

R

NO

0

D1182

Index register E1

╳ ○

○

○

0

-

-

R/W

NO

0

D1183

Index register F1

╳ ○

○

○

0

-

-

R/W

NO

0

D1184

Index register E2

╳ ○

○

○

0

-

-

R/W

NO

0

D1185

Index register F2

╳ ○

○

○

0

-

-

R/W

NO

0

D1186

Index register E3

╳ ○

○

○

0

-

-

R/W

NO

0

D1187

Index register F3

╳ ○

○

○

0

-

-

R/W

NO

0

D1188

Index register E4

╳ ╳

○

○

0

-

-

R/W

NO

0

D1174*

D1175*

D1176*

D1177*

SA/SX: When X2 interruption (I201) occurs,
immediately extracting the low 16 bytes from X0
high-speed counting value. (Only supports V1.8
and above versions.)
D1180*

SC: When X4 interrupttion (I401) occurs,
extracting the low 16 bytes from high-speed
counting value. (Only supports V1.8 and above
versions.)
Enabling X2 to get the counting value of the
high-speed counter C241 (M1057 is On)(Low
word)
SA/SX: When X2 interruption (I201) occurs,
immediately extracting the high 16 bytes from X0
high-speed counting value.

D1181*

2-68

SC: When X4 interruption (I401) occurs,
extractingthe high 16 bytes from high-speed
counting value.

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1189

Index register F4

╳ ╳

○

○

0

-

-

R/W

NO

0

D1190

Index register E5

╳ ╳

○

○

0

-

-

R/W

NO

0

D1191

Index register F5

╳ ╳

○

○

0

-

-

R/W

NO

0

D1192

Index register E6

╳ ╳

○

○

0

-

-

R/W

NO

0

D1193

Index register F6

╳ ╳

○

○

0

-

-

R/W

NO

0

D1194

Index register E7

╳ ╳

○

○

0

-

-

R/W

NO

0

D1195

Index register F7

╳ ╳

○

○

0

-

-

R/W

NO

0

D1196

Content in the display (available in SX)

╳ ○

╳

╳

0

-

-

R/W

NO

0

D1197

Refreshing the display (unit: 100ms) (for SX)

╳ ○

╳

╳

5

-

-

R/W

NO

5

╳ ○

╳

○

0

0

-

R

NO

0

╳ ○

╳

○

0

0

-

R

NO

0

╳ ○

○

○

-

-

-

R/W

YES

#

SA/SX: When X3 interruption (I301) occurs,
immediately extracting the low 16 byte from X1
high-speed counting value. (Only supports V1.8
and above versions.)
D1198*

SC: When X5 interruption (I501) occurs,
extracting the low 16 byte from high-speed
counting value. (Only supports V1.8 and above
versions.)
EH3/SV2: Enabling X3 to get the counting value
of the high-speed counter C241 (M1058 is On)
(Low word)
SA/SX: When X3 interruption (I301) occurs,
immediately extracting the high 16 byte from X1
high-speed counting value. (Only supports V1.8
and above versions.)

D1199*

SC: When X5 interruption (I501) occurs,
extracting the high 16 byte from high-speed
counting value. (Only supports V1.8 and above
versions.)
EH3/SV2: Enabling X3 to get the counting value
of the high-speed counter C241 (M1058 is On)
(High word)

D1200*

Start latched address for auxiliary relays M0 ~
M999
# -> EH2/EH3/SV2: 500; SA/SX/SC: 512

D1201*

End latched address for auxiliary relays M0 ~
M999

╳ ○

○

○

-

-

-

R/W

YES

999

D1202*

Start latched address for auxiliary relays M2000
~ M4095

╳ ○

○

○

-

-

-

R/W

YES

2,000

D1203*

End latched address for auxiliary relays M2000 ~
╳ ○
M4095

○

○

-

-

-

R/W

YES

4,095

D1204*

Start latched address for 100ms timers T0 ~
T199

╳ ╳

○

○

-

-

-

R/W

YES

H'FFFF

D1205*

End latched address for 100ms timers T0 ~ T199 ╳ ╳

○

○

-

-

-

R/W

YES

H’FFFF

DVP-PLC Application Manual

2-69

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1206*

Start latched address for 10ms timers T200 ~ T239╳ ╳

○

○

-

-

-

R/W

YES

H’FFFF

D1207*

End latched address for 10ms timers T200 ~
T239

╳ ╳

○

○

-

-

-

R/W

YES

H’FFFF

╳ ○

○

○

-

-

-

R/W

YES

#

╳ ○

○

○

-

-

-

R/W

YES

199

╳ ○

○

○

-

-

-

R/W

YES

#

D1208*

Start latched address for16-bit counters C0 ~
C199
# -> EH2/EH3/SV2: 100; SA/SX/SC: 96

D1209*

D1210*

End latched address for 16-bit counters C0 ~
C199
Start latched address for 32-bit counters C200 ~
C234
# -> EH2/EH3/SV2: 220; SA/SX/SC: 216

D1211*

End latched address for 32-bit counters C200 ~
C234

╳ ○

○

○

-

-

-

R/W

YES

234

D1212*

Start latched address for 32-bit high-speed
counters C235 ~ C255

╳ ○

○

○

-

-

-

R/W

YES

235

D1213*

End latched address for 32-bit high-speed
counters C235 ~ C255

╳ ○

○

○

-

-

-

R/W

YES

255

╳ ○

○

○

-

-

-

R/W

YES

#

╳ ○

○

○

-

-

-

R/W

YES

#

D1214*

D1215*

Start latched address for steps S0 ~ S899
# -> EH2/EH3/SV2: 500; SA/SX/SC: 512
End latched address for steps S0 ~ S899
# -> EH2/EH3/SV2: 899; SA/SX/SC: 895

D1216*

Start latched address for registers D0 ~ D999

╳ ○

○

○

-

-

-

R/W

YES

200

D1217*

End latched address for registers D0 ~ D999

╳ ○

○

○

-

-

-

R/W

YES

999

D1218*

Start latched address for registers D2000 ~
D9999

╳ ○

○

○

-

-

-

R/W

YES

2,000

D1219*

End latched address for registers D2000 ~
D9999(# -> EH2/EH3/SV2: 11999; EH2: 9999;
SA/SX/SC: 4999)

╳ ○

○

○

-

-

-

R/W

YES

#

D1220

Phase of the 1st group pulse output CH0 (Y0, Y1) ╳ ╳

○

○

0

-

-

R/W

NO

0

D1221

Phase of the 2nd group pulse output CH1 (Y2,
Y3)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1222

Time difference between direction signal and
pulse output for the 1st group pulse CH0 (Y0, Y1) ╳ ╳
in DRVI, DDRVI, DRVA, DDRVA, PLSV, DPLSV

○

○

0

-

-

R/W

NO

0

D1223

Time difference between direction signal and
pulse output for the 2nd group pulse CH1 (Y2,
Y3) in DRVI, DDRVI, DRVA, DDRVA, PLSV,
DPLSV

╳ ╳

○

○

0

-

-

R/W

NO

0

D1225

Counting mode of the counter HHSC0

╳ ╳

○

○

2

-

-

R/W

NO

2

D1226

Counting mode of the counter HHSC1

╳ ╳

○

○

2

-

-

R/W

NO

2

D1227

Counting mode of the counter HHSC2

╳ ╳

○

○

2

-

-

R/W

NO

2

D1228

Counting mode of the counter HHSC3

╳ ╳

○

○

2

-

-

R/W

NO

2

2-70

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1229

Phase of the 3rd group pulse output CH2 (Y4, Y5)
╳ ╳
(available in EH2/SV/EH3/SV2)

○

○

0

-

-

R/W

NO

0

D1230

Phase of the 4th group pulse output CH3 (Y6, Y7)
╳ ╳
(available in EH2/SV/EH3/SV2)

○

○

0

-

-

R/W

NO

0

D1232*

Designating number of output pulses for CH0
deceleration and stop (low 16 bits)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1233*

Designating number of output pulses for CH0
deceleration and stop (high 16 bits)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1234*

Designating number of output pulses for CH1
deceleration and stop (low 16 bits)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1235*

Designating number of output pulses for CH1
deceleration and stop (high 16 bits)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1236*

Designating number of output pusles for CH2
deceleration and stop (low 16 bits)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1237*

Designating number of output pulses for CH2
deceleration and stop (high 16 bits)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1238*

Designating number of output pulses for CH3
deceleration and stop (low 16 bits)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1239*

Designating number of output pulses for CH3
deceleration and stop (high 16 bits)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1240

The low 16 bits of the end frequency of CH0
(available when the acceleration and the
deceleration are separate)

╳ ╳

○

○

0

0

-

R/W

NO

0

D1241

The high 16 bits of the end frequency of CH0
(available when the acceleration and the
deceleration are separate)

╳ ╳

○

○

0

0

-

R/W

NO

0

D1244

Number of idle speed output from CH0 in the
instruction DCLLM

╳ ╳

○

○

0

0

-

R/W

NO

0

D1245

Number of idle speed output from CH1 in the
instruction DCLLM

╳ ╳

○

○

0

0

-

R/W

NO

0

D1246

Number of idle speed output from CH2 in the
instruction DCLLM

╳ ╳

○

○

0

0

-

R/W

NO

0

D1247

Number of idle speed output from CH3 in the
instruction DCLLM

╳ ╳

○

○

0

0

-

R/W

NO

0

D1249

Communication timeout of COM1 instruction
(unit: 1ms; the maximum value is 50ms; the
value less than 50ms is count as 50ms.) (Only
the instruction MODRW and RS are supported.)
RS: 0 indicates that the timeout is not set.

╳ ╳

╳

○

0

-

-

R/W

NO

0

D1250

Communication error in COM1 instruction (Only
the instruction MODRW and RS are supported.)

╳ ╳

╳

○

0

-

-

R/W

NO

0

D1252

Communication timeout of COM3 instruction
(unit: 1ms; the maximum value is 50ms; the
value less than 50ms is count as 50ms.) (Only
the instruction MODRW and RS are supported.)
RS: 0 indicates that the timeout is not set.

╳ ╳

╳

○

0

-

-

R/W

NO

0

DVP-PLC Application Manual

2-71

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1253

Communication error in COM3 instruction (Only
the instruction MODRW and RS are supported.)

╳ ╳

╳

○

0

-

-

R/W

NO

0

D1255

COM3 station address

╳ ╳

╳

○

-

-

-

R/W

NO

0

When the RS-485 communication instruction
MODRW built-in the PLC is executed, the words
of sent out by the instruction will be stored in
D1256 ~ D1259. You can check whether the
instruction is correct by the contents in these
registers.

○ ○

○

○

0

-

-

R

NO

0

The RS-485 communication instruction MODRW
built in the PLC automatically converts the ASCII
○ ○
data received in the designated register into hex
and store the hex data into D1296 ~ D1311.

○

○

0

-

-

R

NO

0

Number of times the instruction ZRN searches
for Z phase and the number of displacement

╳ ╳

╳

○

0

0

-

R/W

NO

0

╳ ○

○

○

#

-

-

R/W

NO

0

╳ ○

○

○

#

-

-

R/W

NO

0

╳ ○

○

○

#

-

-

R/W

NO

0

╳ ○

○

○

#

-

-

R/W

NO

1

╳ ○

○

○

#

-

-

R/W

NO

1

╳ ○

○

○

#

-

-

R/W

NO

6

╳ ○

○

○

#

-

-

R/W

NO

0

╳ ╳

○

○

0

-

-

R

NO

0

╳ ╳

○

○

0

-

-

R

NO

0

╳ ╳

○

○

0

-

-

R

NO

0

╳ ╳

○

○

0

-

-

R

NO

0

╳ ╳

○

○

0

-

-

R

NO

0

╳ ╳

○

○

0

-

-

R

NO

0

╳ ╳

○

○

0

-

-

R

NO

0

D1256
↓
D1295

D1296
↓
D1311
D1312
D1313*

D1314*

D1315*

D1316*

D1317*

D1318*

D1319*

D1320*

D1321*

D1322*

D1323*

D1324*

D1325*

D1326*

2-72

Second in RTC: 00 ~ 59
#: read RTC and write
Minute in RTC: 00 ~ 59
#: read RTC and write
Hour in RTC: 00 ~ 23
#: read RTC and write
Day in RTC: 01 ~ 31
#: read RTC and write
Month in RTC: 01 ~ 12
#: read RTC and write
Week in RTC: 1 ~ 7
#: read RTC and write
Year in RTC: 00 ~ 99 (A.D.)
#: read RTC and write
ID of the 1st right-side extension module
(available in EH2/EH3/SV2)
ID of the 2nd right-side extension module
(available in EH2/EH3/SV2)
ID of the 3rd right-side extension module
(available in EH2/EH3/SV2)
ID of the 4th right-side extension module
(available in EH2/EH3/SV2)
ID of the 5th right-side extension module
(available in EH2/EH3/SV2)
ID of the 6th right-side extension module
(available in EH2/EH3/SV2)
ID of the 7th right-side extension module
(available in EH2/EH3/SV2)

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

D1327*

ID of the 8th right-side extension module
(available in EH2/EH3/SV2)

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

╳ ╳

○

○

0

-

-

R

NO

0

D1328

Low word of offset pulse the 1st group pulses
CH0 (Y0, Y1)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1329

High word of offset pulse the 1st group pulses
CH0 (Y0, Y1)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1330

Low word of offset pulse the 2nd group pulses
CH1 (Y2, Y3)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1331

High word of offset pulse the 2nd group pulses
CH1 (Y2, Y3)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1332

Low word of the remaining number of pulses of
st
the 1 group pulses CH0 (Y0, Y1)

╳ ╳

○

○

0

-

-

R

NO

0

D1333

High word of the remaining number of pulses of
st
the 1 group pulses CH0 (Y0, Y1)

╳ ╳

○

○

0

-

-

R

NO

0

D1334

Low word of the remaining number of pulses of
the 2nd group pulses CH1 (Y2, Y3)

╳ ╳

○

○

0

-

-

R

NO

0

D1335

High word of the remaining number of pulses of
nd
the 2 group pulses CH1 (Y2, Y3)

╳ ╳

○

○

0

-

-

R

NO

0

╳ ╳

○

○

-

-

-

R

YES

0

╳ ╳

○

○

-

-

-

R

YES

0

╳ ╳

○

○

-

-

-

R

YES

0

╳ ╳

○

○

-

-

-

R

YES

0

○

-

╳ ○

○

-

-

R/W

D1336

st
Low word of the present value of the 1 group
pulses CH0 (Y0, Y1)

(EH2/SV/EH3/SV2 are latached)
D1337

st
High word of the present value of the 1 group
pulses CH0 (Y0, Y1)

(EH2/SV/EH3/SV2 are latached)
nd

D1338

Low word of the present value of the 2
pulses CH1 (Y2, Y3)

group

(EH2/SV/EH3/SV2 are latached)
nd

D1339

High word of the present value of the 2
pulses CH1 (Y2, Y3)

group

(EH2/SV/EH3/SV2 are latached)

D1340

EH2/SV/EH3/SV2: start/end frequency of the 1st
group pulse output CH0 (Y0, Y1)
SC: start/end frequency of Y10 output
Fixed
as
200k
Hz

D1341

Low word of max. output frequency

D1342

High word of max. output frequency

D1343*

EH2/SV/EH3/SV2: acceleration/deceleration
st
time for the 1 group pulse output CH0 (Y0, Y1)

╳

200

YES
200
NO

╳ ╳

○

○

-

-

-

R

YES

H’04D0

╳ ╳

○

○

-

-

-

R

YES

3

○

-

YES

100

╳ ○

○

-

-

R/W
NO

200

SC: acceleration/deceleration time of Y10 output

╳

200

D1344

Low word of the number of compensation pulses
╳ ╳
st
of the 1 group pulses CH0 (Y0, Y1)

○

○

-

-

-

R/W

YES

0

D1345

High word of the number of compensation pulses
╳ ╳
st
of the 1 group pulses CH0 (Y0, Y1)

○

○

-

-

-

R/W

YES

0

DVP-PLC Application Manual

2-73

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1346

Low word of the number of compensation pulses
╳ ╳
of the 2nd group pulses CH1 (Y2, Y3)

○

○

-

-

-

R/W

YES

0

D1347

High word of the number of compensation pulses
╳ ╳
nd
of the 2 group pulses CH1 (Y2, Y3)

○

○

-

-

-

R/W

YES

0

SC: low word of present value of Y10 pulse
output

╳ ○

╳

╳

0

-

-

R

NO

0

EH2/SV/EH3/SV2: CH0 pulse output. When
M1534 = On, it refers to the deceleration time

╳ ╳

○

○

-

-

-

R/W

YES

100

SC: high word of present value of Y10 pulse
output

╳ ○

╳

╳

0

-

-

R

NO

0

EH2/SV/EH3/SV2: CH1 pulse output. When
M1535 = On, it refers to the deceleration time

╳ ╳

○

○

-

-

-

R/W

YES

100

SC: low word of present value of Y11 pulse
output

╳ ○

╳

╳

0

-

-

R

NO

0

EH2/SV/EH3/SV2: CH2 pulse output. When
M1536 = On, it refers to the deceleration time

╳ ╳

○

○

-

-

-

R/W

YES

100

SC: high word of present value of Y11 pulse
output

╳ ○

╳

╳

0

-

-

R

NO

0

EH2/SV/EH3/SV2: CH3 pulse output. When
M1537 = On, it refers to the deceleration time

╳ ╳

○

○

-

-

-

R/W

YES

100

SC: start/end frequency of Y11 output

╳ ○

╳

╳

200

-

-

R/W

NO

200

EH2/SV/EH3/SV2: start/end frequency of the 2nd
group pulse output CH1 (Y2, Y3)

╳ ╳

○

○

-

-

-

R/W

YES

200

SC: acceleration/deceleration time of Y11 output

╳ ○

╳

╳

200

-

-

R/W

NO

200

EH2/SV/EH3/SV2: acceleration/deceleration
time of the 2nd group pulse output CH1 (Y2, Y3)

╳ ╳

○

○

-

-

-

R/W

YES

100

╳ ╳

╳

○

0

0

0

R

NO

0

D1348

D1349

D1350

D1351

D1352

D1353*

Scan cycle for the PLC link (unit: 1ms)
D1354

PS1: The maximum value is K32000
PS2: K0: The PLC link stops or the first detection
is complete.

D1355*

Starting reference for Master to read from Salve
ID#1

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1356*

Starting reference for Master to read from Salve
ID#2

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1357*

Starting reference for Master to read from Salve
ID#3

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1358*

Starting reference for Master to read from Salve
ID#4

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1359*

Starting reference for Master to read from Salve
ID#5

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1360*

Starting reference for Master to read from Salve
ID#6

╳ ○

○

○

-

-

-

R/W

YES

H’1064

2-74

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1361*

Starting reference for Master to read from Salve
ID#7

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1362*

Starting reference for Master to read from Salve
ID#8

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1363*

Starting reference for Master to read from Salve
ID#9

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1364*

Starting reference for Master to read from Salve
ID#10

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1365*

Starting reference for Master to read from Salve
ID#11

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1366*

Starting reference for Master to read from Salve
ID#12

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1367*

Starting reference for Master to read from Salve
ID#13

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1368*

Starting reference for Master to read from Salve
ID#14

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1369*

Starting reference for Master to read from Salve
ID#15

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1370*

Starting reference for Master to read from Salve
ID#16

╳ ○

○

○

-

-

-

R/W

YES

H’1064

D1371

Time unit of PWM Y0 pulse output when
M1070=On

╳ ╳

○

○

1

-

-

R/W

NO

1

D1372

Time unit of PWM Y2 pulse output when
M1071=On

╳ ╳

○

○

1

-

-

R/W

NO

1

╳ ╳

○

○

1

-

-

R/W

NO

1

╳ ╳

○

○

1

-

-

R/W

NO

1

D1375

rd
Low word of the present value of the 3 group
pulses CH2 (Y4, Y5) (available in
EH2/SV/EH3/SV2)

╳ ╳

○

○

-

-

-

R/W

YES

0

D1376

rd
High word of the present value of the 3 group
pulses CH2 (Y4, Y5) (available in
EH2/SV/EH3/SV2)

╳ ╳

○

○

-

-

-

R/W

YES

0

D1377

th
Low word of the present value of the 4 group
pulses CH3 (Y6, Y7) (available in
EH2/SV/EH3/SV2)

╳ ╳

○

○

-

-

-

R/W

YES

0

D1378

th
High word of the present value of the 4 group
pulses CH3 (Y6, Y7) (available in
EH2/SV/EH3/SV2)

╳ ╳

○

○

-

-

-

R/W

YES

0

D1379

Start frequency of the 1st section and end
frequency of the last section for the 3rd group

╳ ╳

○

○

-

-

-

R/W

YES

200

D1373

Time unit of PWM Y4 pulse output when
M1530=On
(available in EH2/SV/EH3/SV2)

D1374

Time unit of PWM Y6 pulse output when
M1531=On
(available in EH2/SV/EH3/SV2)

DVP-PLC Application Manual

2-75

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

pulse output CH2 (Y4, Y5) (available in
EH2/SV/EH3/SV2)

D1380

Start frequency of the 1st section and end
frequency of the last section for the 4th group
pulse output CH3 (Y6, Y7) (available in
EH2/SV/EH3/SV2)

╳ ╳

○

○

-

-

-

R/W

YES

200

D1381

rd
Acceleration/deceleration time for the 3 pulse
output CH2 (Y4, Y5) (available in
EH2/SV/EH3/SV2)

╳ ╳

○

○

-

-

-

R/W

YES

100

D1382

th
Acceleration/deceleration time for the 4 pulse
output CH3 (Y6, Y7) (available in
EH2/SV/EH3/SV2)

╳ ╳

○

○

-

-

-

R/W

YES

100

D1383*

Setting up the time difference between direction
signal and pulse output point for the 1st set of
pulses CH2 (Y4, Y5) for DRVI, DDRVI, DRVA,
DDRVA, PLSV, DPLSV instructions. (for
EH2/SV/EH3/SV2)

╳ ╳

○

○

0

-

-

R/W

NO

0

D1384*

Setting up the time difference between direction
signal and pulse output point for the 1st set of
pulses CH3 (Y6, Y7) for DRVI, DDRVI, DRVA,
DDRVA, PLSV, DPLSV instructions. (for
EH2/SV/EH3/SV2)

╳ ╳

○

○

0

-

-

R/W

NO

0

╳ ╳

○

╳

0

-

-

R

NO

0

╳ ╳

○

╳

0

-

-

R

NO

0

╳ ╳

○

╳

0

-

-

R

NO

0

╳ ╳

○

╳

0

-

-

R

NO

0

╳ ╳

○

╳

0

-

-

R

NO

0

╳ ╳

○

╳

0

-

-

R

NO

0

╳ ╳

○

╳

0

-

-

R

NO

0

╳ ╳

○

╳

0

-

-

R

NO

0

D1386*

D1387*

D1388*

D1389*

D1390*

D1391*

D1392*

D1393*

ID of the 1st left-side extension module
(available in SV)
ID of the 2nd left-side extension module
(available in SV)
ID of the 3rd left-side extension module
(available in SV)
ID of the 4th left-side extension module
(available in SV)
ID of the 5th left-side extension module
(available in SV)
ID of the 6th left-side extension module
(available in SV)
ID of the 7th left-side extension module
(available in SV)
ID of the 8th left-side extension module
(available in SV)

D1399*

Starting Salve ID designated by PLC LINK

╳ ○

○

○

-

-

-

R/W

YES

1

D1415*

Starting reference for Master to write in Salve
ID#1

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1416*

Starting reference for Master to write in Salve
ID#2

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

2-76

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1417*

Starting reference for Master to write in Salve
ID#3

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1418*

Starting reference for Master to write in Salve
ID#4

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1419*

Starting reference for Master to write in Salve
ID#5

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1420*

Starting reference for Master to write in Salve
ID#6

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1421*

Starting reference for Master to write in Salve
ID#7

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1422*

Starting reference for Master to write in Salve
ID#8

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1423*

Starting reference for Master to write in Salve
ID#9

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1424*

Starting reference for Master to write in Salve
ID#10

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1425*

Starting reference for Master to write in Salve
ID#11

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1426*

Starting reference for Master to write in Salve
ID#12

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1427*

Starting reference for Master to write in Salve
ID#13

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1428*

Starting reference for Master to write in Salve
ID#14

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1429*

Starting reference for Master to write in Salve
ID#15

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1430*

Starting reference for Master to write in Salve
ID#16

╳ ○

○

○

-

-

-

R/W

YES

H’10C8

D1431*

Times of PLC LINK polling cycle

╳ ○

○

○

0

-

-

R/W

NO

0

D1432*

Current times of PLC LINK polling cycle

╳ ○

○

○

0

-

-

R/W

NO

0

D1433*

Number of salve units linked to PLC LINK

╳ ○

○

○

0

-

-

R/W

NO

0

D1434*

Data length to be read on Salve ID#1

╳ ○

○

○

-

-

-

R/W

YES

16

D1435*

Data length to be read on Salve ID#2

╳ ○

○

○

-

-

-

R/W

YES

16

D1436*

Data length to be read on Salve ID#3

╳ ○

○

○

-

-

-

R/W

YES

16

D1437*

Data length to be read on Salve ID#4

╳ ○

○

○

-

-

-

R/W

YES

16

D1438*

Data length to be read on Salve ID#5

╳ ○

○

○

-

-

-

R/W

YES

16

D1439*

Data length to be read on Salve ID#6

╳ ○

○

○

-

-

-

R/W

YES

16

D1440*

Data length to be read on Salve ID#7

╳ ○

○

○

-

-

-

R/W

YES

16

D1441*

Data length to be read on Salve ID#8

╳ ○

○

○

-

-

-

R/W

YES

16

DVP-PLC Application Manual

2-77

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1442*

Data length to be read on Salve ID#9

╳ ○

○

○

-

-

-

R/W

YES

16

D1443*

Data length to be read on Salve ID#10

╳ ○

○

○

-

-

-

R/W

YES

16

D1444*

Data length to be read on Salve ID#11

╳ ○

○

○

-

-

-

R/W

YES

16

D1445*

Data length to be read on Salve ID#12

╳ ○

○

○

-

-

-

R/W

YES

16

D1446*

Data length to be read on Salve ID#13

╳ ○

○

○

-

-

-

R/W

YES

16

D1447*

Data length to be read on Salve ID#14

╳ ○

○

○

-

-

-

R/W

YES

16

D1448*

Data length to be read on Salve ID#15

╳ ○

○

○

-

-

-

R/W

YES

16

D1449*

Data length to be read on Salve ID#16

╳ ○

○

○

-

-

-

R/W

YES

16

D1450*

Data length to be written on Slave ID#1

╳ ○

○

○

-

-

-

R/W

YES

16

D1451*

Data length to be written on Slave ID#2

╳ ○

○

○

-

-

-

R/W

YES

16

D1452*

Data length to be written on Slave ID#3

╳ ○

○

○

-

-

-

R/W

YES

16

D1453*

Data length to be written on Slave ID#4

╳ ○

○

○

-

-

-

R/W

YES

16

D1454*

Data length to be written on Slave ID#5

╳ ○

○

○

-

-

-

R/W

YES

16

D1455*

Data length to be written on Slave ID#6

╳ ○

○

○

-

-

-

R/W

YES

16

D1456*

Data length to be written on Slave ID#7

╳ ○

○

○

-

-

-

R/W

YES

16

D1457*

Data length to be written on Slave ID#8

╳ ○

○

○

-

-

-

R/W

YES

16

D1458*

Data length to be written on Slave ID#9

╳ ○

○

○

-

-

-

R/W

YES

16

D1459*

Data length to be written on Slave ID#10

╳ ○

○

○

-

-

-

R/W

YES

16

D1460*

Data length to be written on Slave ID#11

╳ ○

○

○

-

-

-

R/W

YES

16

D1461*

Data length to be written on Slave ID#12

╳ ○

○

○

-

-

-

R/W

YES

16

D1462*

Data length to be written on Slave ID#13

╳ ○

○

○

-

-

-

R/W

YES

16

D1463*

Data length to be written on Slave ID#14

╳ ○

○

○

-

-

-

R/W

YES

16

D1464*

Data length to be written on Slave ID#15

╳ ○

○

○

-

-

-

R/W

YES

16

D1465*

Data length to be written on Slave ID#16

╳ ○

○

○

-

-

-

R/W

YES

16

D1466

Number of pulses required per revolution of
motor at CH0 (low word)

╳ ╳

○

○

-

-

-

R

YES

2,000

D1467

Number of pulses required per revolution of
motor at CH0 (high word)

╳ ╳

○

○

-

-

-

R

YES

0

D1468

Number of pulses required per revolution of
motor at CH1 (low word)

╳ ╳

○

○

-

-

-

R

YES

2,000

D1469

Number of pulses required per revolution of
motor at CH1 (high word)

╳ ╳

○

○

-

-

-

R

YES

0

D1470

Distance created for 1 revolution of motor at CH0
╳ ╳
(low word)

○

○

-

-

-

R

YES

1,000

D1471

Distance created for 1 revolution of motor at CH0
╳ ╳
(high word)

○

○

-

-

-

R

YES

0

2-78

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1472

Distance created for 1 revolution of motor at CH1
╳ ╳
(low word)

○

○

-

-

-

R

YES

1,000

D1473

Distance created for 1 revolution of motor at CH1
╳ ╳
(high word)

○

○

-

-

-

R

YES

0

D1474

Machine unit of CH0 movement (low word)

╳ ╳

○

○

-

-

-

R

YES

0

D1475

Machine unit of CH0 movement (high word)

╳ ╳

○

○

-

-

-

R

YES

0

D1476

Machine unit of CH1 movement (low word)

╳ ╳

○

○

-

-

-

R

YES

0

D1477

Machine unit of CH1 movement (high word)

╳ ╳

○

○

-

-

-

R

YES

0

╳ ╳

○

○

100

-

-

R/W

NO

100

╳ ╳

○

○

100

-

-

R/W

NO

100

○

○

-

-

-

R

YES

0

D1495*

When M1353 = On, the starting D register No. to ╳ ○
store data read from ID#1~16 by Master
(available in EH2/SV/EH3/SV2).

D1496*

Data buffer to store the data written on Slave
ID#1 when M1353 = Off.
○

○

-

-

-

R/W

YES

0

○

○

-

-

-

R

YES

0

○

○

-

-

-

R/W

YES

0

╳ ○

○

○

-

-

-

R

YES

0

╳ ○

○

○

-

-

-

R/W

YES

0

D1478

D1479

D1480*
↓

↓

Output/input ratio of CH2 close-loop control
(for EH2/SV/EH3/SV2)
Output/input ratio of CH3 close-loop control
(for EH2/SV/EH3/SV2)
Data buffer to store the data read from Slave
ID#1 when M1353 = Off.

D1511*

When M1353 = On, the starting D register No. to ╳ ○
store data written on ID#1~16 by Master
(available in EH2/SV/EH3/SV2).

D1512*

Data buffer to store the data read from Slave
ID#2 when M1353 = Off.

↓
D1527*

When M1353 = On, the starting D register No. to ╳ ○
store data read from ID#17~32 by Master
(available in EH2/SV/EH3/SV2).

D1528*

Data buffer to store the data written on Slave
ID#2 when M1353 = Off.

↓
D1543*

When M1353 = On, the starting D register No. to ╳ ○
store data written on ID#17~32 by Master
(available in EH2/SV/EH3/SV2).

D1544*

Data buffer to store the data read from Slave
ID#3 when M1353 = Off.

↓
D1559*

When M1353 = On, the length of data read from
ID#17~32 by Master (available in
EH2/SV/EH3/SV2).

D1560*

Data buffer to store the data written on Slave
ID#2 when M1353 = Off.

↓
D1575*

When M1353 = On, the length of data written on
ID#17~32 by Master (available in
EH2/SV/EH3/SV2).

DVP-PLC Application Manual

2-79

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

D1576*
↓

D1623*
D1624*
↓
D1639*
D1640*
↓
D1655*
D1656*
↓
D1671*
D1672*
↓
D1687*
D1688*
↓
D1703*
D1704*
↓
D1719*
D1720*
↓
D1735*
D1736*
↓
D1751*
D1752*
↓
D1767*
D1768*
↓

2-80

Ø

Attribute Latched

Default

RUN STOP

○

-

-

-

R

YES

0

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#5

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#5

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#6

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#6

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#7

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#7

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#8

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#8

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#9

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#9

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#10

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#4 when M1353 = Off.

↓

On

Ø

○

D1592*

D1608*

Ø

╳ ○

D1591*

D1607*

SV SV2

Off STOP RUN

Data buffer to store the data read from Slave
ID#4 when M1353 = Off.
When M1353=On, the starting D register No. to
store data read from ID#17~32 by EH2 Master
(available in EH2/SV/EH3/SV2).

↓

EH2 EH3

When M1353=On, the starting D register No. to
store data to be written on ID#17~32 by EH2
Master (available in EH2/SV/EH3/SV2).

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

D1783*
D1784*
↓
D1799*
D1800*
↓
D1815*
D1816*
↓
D1831*
D1832*
↓
D1847*
D1848*
↓
D1863*
D1864*
↓
D1879*
D1880*
↓
D1895*
D1896*
↓
D1911*
D1900
↓
D1915

D1916
↓
D1931
D1912*
↓
D1927*
D1928*
↓
D1943*

Data buffer to store the data to be written on
Slave ID#10

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#11

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#11

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#12

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#12

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#13

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#13

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#14

╳ ○

○

○

-

-

-

R

YES

0

When M1356 is ON, the values in these registers
are defined as the station address (ID1~ID16).
The default station address in D1399 is not used. ╳ ╳
Only when M1356 is ON is rhe latched function
available.

╳

○

-

-

R/W

NO

1~16

When M1356 is ON, the values in these registers
are defined as the station address (ID17~ID32).
The default station address in D1399 is not used. ╳ ╳
Only when M1356 is ON is rhe latched function
available.

╳

○

-

-

R/W

NO

17~32

Data buffer to store the data to be written on
Slave ID#14

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#15

╳ ○

○

○

-

-

-

R

YES

0

DVP-PLC Application Manual

1~1
6

17~3
2

2-81

2 Functions of Devices in DVP-PLC
ES SA
Special D

Function

EX SX
SS SC

D1944*

EH2 EH3
SV SV2

Off STOP RUN
Ø
On

Ø

Ø

Attribute Latched

Default

RUN STOP

Data buffer to store the data to be written on
Slave ID#15

╳ ○

○

○

-

-

-

R/W

YES

0

Data buffer to store the data read from Slave
ID#16

╳ ○

○

○

-

-

-

R

YES

0

Data buffer to store the data to be written on
Slave ID#16

╳ ○

○

○

-

-

-

R/W

YES

0

D1992

Code of the ninth right side extension module

╳ ╳

╳

○

0

-

-

R

NO

0

D1993

Code of the tenth right side extension module

╳ ╳

╳

○

0

-

-

R

NO

0

Code of the eleventh right side extension module ╳ ╳

╳

○

0

-

-

R

NO

0

DVP-PCC01 records the number of times the
PLC code can be entered.

╳ ○

○

○

0

-

-

R/W

NO

0

Code of the twelfth right side extension module

╳ ╳

╳

○

0

-

-

R

NO

0

DVPPCC01 records the length of PLC ID.

╳ ○

○

○

0

-

-

R/W

NO

0

D1996

The 1st word of PLC ID in DVPPCC01 (indicated
by the hex value corresponding to ASCII word)

╳ ○

○

○

0

-

-

R/W

NO

0

D1997

The 2nd word of PLC ID in DVPPCC01 (indicated
╳ ○
by the hex value corresponding to ASCII word)

○

○

0

-

-

R/W

NO

0

D1998

The 3rd word of PLC ID in DVPPCC01 (indicated
╳ ○
by the hex value corresponding to ASCII word)

○

○

0

-

-

R/W

NO

0

D1999

The 4th word of PLC ID in DVPPCC01 (indicated
by the hex value corresponding to ASCII word)

○

○

0

-

-

R/W

NO

0

↓
D1959*
D1960*
↓
D1975*
D1976*
↓
D1991*

D1994

D1995

2-82

╳ ○

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
2.11

Functions of Special Auxiliary Relays and Special Registers

Function Group

PLC Operation Flag

Number

M1000 ~ M1003

M1000:
M1000 (A contact) is constantly “On” during operation and detection. When PLC is in RUN status, M1000 remains
“On”.
M1000
PLC is running

Y0
Normally On contact
in PLC RUN

Keeps being On

M1001:
M1001 (B contact) is constantly “On” during operation and detection. When PLC is in RUN status, M1001 remains
“On”.
M1002:
M1002 is “On” during the first scan when PLC starts to RUN and remains “Off” afterward. The pulse width = 1 scan
time. Use this contact for all kinds of initial settings.
M1003:
M1003 is “Off” during the first scan when PLC starts to RUN and remains “On” afterward. M1003 enables
negative-direction (“Off” immediately when RUN) pulses.
PLC RUN
M1000
M1001
M1002
M1003
scan time

Function Group

Monitor Timer

Number

D1000

Contents:
1.

Monitor timer is used for moitoring PLC scan time. When the scan time exceeds the set time in the moitor timer,
the red ERROR LED indicator remains beaconing and all outputs will be “Off”.

2.

The initial set value of the time in the monitor timer is 200ms. If the program is long or the operation is too
complicated, MOV instruction can be used for changing the set value. See the example below for SV = 300ms.

DVP-PLC Application Manual

2-83

2 Functions of Devices in DVP-PLC
M1002
0

MOV

K300

D1000

Initial pulse

3.

The maximum set value in the monitor timer is 32,767ms. Please be noted that if the SV is too big, the timing of
detecting operational errors will be delayed. Therefore, it is suggested that you remain the scan time of shorter
than 200ms.

4.

Complicated instruction operations or too many extension modules being connected to the MPU will result in the
scan time being too long. Check D1010 ~ D1012 to see if the scan time exceeds the SV in D1000. In this case,
besides modifying the SV in D1000, you can also add WDT instruction (API 07) into the PLC program. When the
CPU execution progresses to WDT instruction, the internal monitor timer will be cleared as “0” and the scan time
will not exceed the set value in the monitor timer.

Function Group

Program Capacity

Number

D1002

Contents:
The program capacity differs in different series of MPUs.
1.

ES/EX/SS series MPU: 3,792 Steps

2.

SA/SX/SC series MPU: 7,920 Steps

3.

EH2/SV series MPU: 15,872 Steps

4.

EH3/SV2 series MPU: 30000 Steps

Function Group

Syntax Check

Number

M1004, D1004, D1137

Contents:
1.

When errors occur in syntax check, ERROR LED indicator will flash and special relay M1004 = On.

2.

Timings for PLC syntax check:
a) When the power goes from “Off” to “On”.

3.

b)

When the program is written into PLC by means of WPLSoft, ISPSoft or HPP.

c)

When on-line editing is being conducted.

The syntax check may start due to illegal use of instruction operands (devices) or incorrect program syntax loop.
The error can be detected by the error code in D1004 and error table. The address where the error exists will be
stored in D1137. (The address value in D1137 will be invalid if the error is a general loop error.)

4.

2-84

See Chapter 2.13 for error codes for syntax check.

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Function Group

Data Backup Memory

Number

M1005~M1007

Contents:
When the data backup memory card is installed in EH2 MPU, MPU will operate according to the On/Off of switch on
the card. If the switch is “On”, the following comparisons will be conducted and the card will be copied to MPU. If the
switch is “Off”, MPU will not perform any action.
1. M1005 = On: An error occurs in the comparison between the ciphers of MPU and the data backup memory card
and MPU does not perform any action.
2. M1006 = On: The data backup memory card has not been initialized.
3. M1007 = On: Data in the program area of the data backup memory card do not exist, it means data doesn’t exist
in the program area of data backup memory card.

Function Group

Scan Time-out Timer

Number

M1008, D1008

Contents:
1.

M1008 = On: Scan time-out occurs during the execution of the program, and PLC ERROR LED indicator
remains beaconing.

2.

Users can use WPLSoft, ISPSoft, or HPP to monitor the content (STEP address when WDT timer is “On”).

Function Group

Checking Lost PLC SRAM Data

Number

D1009, M1175, M1176

Contents:
1. bit0 ~ bit7 record the types of data lost. bit = 1 refers to losing data; bit = 0 refers to correct data.
2. What are lost
bit8 ~ 15

bit 7

Reserved

PLC
program

bit 6
D register

bit 5
T register

bit 4

bit 3

bit 2

bit 1

bit 0

C register

File
register

M relay

S step

password

3. After the PLC is powered, the data in SRAM will be verified. If the SRAM data are lost, the PLC will record the
error in D1009 and set on M1175 or M1176 according to the content of the data.

Function Group

Scan Time Monitor

Number

D1010 ~ D1012

Contents:
The present value, minimum value and maximum value of scan time are stored in D1010 ~ D1012.
1. D1010: Present scan time value
2. D1011: Minimum scan time value
3. D1012: Maximum scan time value

DVP-PLC Application Manual

2-85

2 Functions of Devices in DVP-PLC
Function Group

Internal Clock Pulse

Number

M1011 ~ M1014

Contents:
1.

All PLC MPUs provide four different clock pulses. When PLC is powered, the four clock pulses will start
automatically.
10 ms
100 Hz

M1011 (10 ms)
100 ms
M1012 (100 ms)

10 Hz
1 sec
1 Hz

M1013 (1 sec)
1 min
M1014 (60 sec)

2.

The clock pulses also start when PLC is in STOP status. The activation timing of clock pulses and that of RUN
will not happen synchronously.

Function Group

High-Speed Timer

Number

M1015, D1015

Contents:
1.

The steps for using special M and special D directly:
a) High-speed counter is valid only when PLC is in RUN status for EH2/SVEH3/SV2, but is valid when PLC is
in RUN or STOP stauts for SA/SX/SC.
b)

M1015 = On: High-speed counter D1015 is enabled only whtn PLC scans to END instruction. (Min. timing
unit of D1015: 100us)

c)

Timing range of D1015: 0~32,767. When the timing reaches 32,767, the next timing restarts from 0.

d)

M1015 = Off: D1015 stops timing immediately.

2.

EH2/SVEH3/SV2 series MPU offers high-speed timer instruction HST. See API 196 HST for more details.

3.

Example:
a)

When X10 = On, M1015 will be On. The high-speed timer will start to time and record the present value in
D1015.

b)

When X10 = Off, M1015 will be Off. The high-speed timer will be disabled.
X10
M1015

2-86

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Function Group

Real Time Clock

Number

M1016, M1017, M1076, D1313 ~ D1319

Contents:
1.

Special M and special D relevant to RTC
No.

Name

M1016

Year (in A.D.) in RTC

M1017

±30 seconds
correction

M1076

RTC malfunction

M1082

2.

Function
Off: display the last 2 digits of year in A.D.
On: display the last 2 digits of year in A.D. plus 2,000
From “Off” to “On”, the correction is enabled.
0 ~ 29 second: minute intact; second reset to 0
30~ 59 second: mimute + 1; second reset to 0
Set value exceeds the range; dead battery

Flag change on RTC On: Modification on RTC

D1313

Second

0 ~ 59

D1314

Minute

0 ~ 59

D1315

Hour

0 ~ 23

D1316

Day

1 ~ 31

D1317

Month

1 ~ 12

D1318

Week

1~7

D1319

Year

0 ~ 99 (last 2 digits of Year in A.D.)

If the set value in RTC is incorrect, the time will be recovered as “Saturday, 00:00 Jan. 1, 2000” when PLC is

powered and restarted.
3.

D1313 ~ D1319 will immediately update the RTC only when in TRD instruction or WPLSoft monitoring mode.

4.

How to make corrections on RTC:
a) Use TWR instruction fir SA/SX/SX/EH2/SVEH3/SV2 series MPU. See API 167 TWR for more details.
b) Use WPLSoft, ISPSoft, or digital display panel DU-01.

Function Group

π(PI)

Number

D1018, D1019

Contents:
1.

D1018 and D1019 are combined as 32-bit data register for storing the floating point value ofπ(PI)

2.

loating point value = H 40490FDB

Function Group

Adjustment on Input Terminal Response Time

Number

D1020, D1021

Contents:
1.

D1020 can be used for setting up the response time of receiving pulses at X0 ~X7 for SS/ES/EX/SA/SX/SC
series MPU. (Setup range: 0 ~ 20; Unit: ms)

2.

D1021 can be used for setting up the response time of receiving pulses at X10 ~X17 for ES series MPU. (Setup
range: 0 ~ 20; Unit: ms)

DVP-PLC Application Manual

2-87

2 Functions of Devices in DVP-PLC
3.

D1021 can be used for setting up the response time of receiving pulses at X10 ~X11 for SC series MPU. (Setup
range: 0 ~ 1,000; Unit: time)

4.

D1020 can be used for setting up the response time of receiving pulses at X0 ~X7 for EH2/SVEH3/SV2 series
MPU. (Setup range: 0 ~ 60; Unit: ms)

5.

D1021 can be used for setting up the response time of receiving pulses at X10 ~X17 for EH2/SVEH3/SV2 series
MPU. (Setup range: 0 ~ 60; Unit: ms)

6.

When the power of PLC goes from “Off” to “On”, the content of D1020 and D1021 turn to 10 automatically.
Terminal
X0

response time
0

0ms

1

1ms

Set by D1020 (default: 10)
X17

10ms
15ms

7.

10
15

Regenerating input
Status
memory

If the following programs are executed during the program, the response time of X0 ~ X7 will be set to 0ms. The
fastest response time of input terminals is 50μs due to that all terminals are connected with RC filter loop.
M1000
MOV

K0

D1020

normally ON contact

8.

There is no need to make adjustment on response time when using high-speed counters and interruptions
during the program.

9.

Using API 51 REFF instruction has the same effect as modifying D1020 and D1021.

Function Group

Execution Completed Flag

Number

M1029, M1030, M1036, M1037, M1102, M1103

Contents:
Using execution completed flag:
1.

API 52 MTR, API 71 HKY, API 72 DSW, API 74 SEGL, API 77 PR: M1029 = On whenever the instruction
completes one scan period.

2.

API 57 PLSY, API 59 PLSR:
a) M1029 will be “On” after Y0 pulse output of SA/SX/SC/ES/EX/SS is completed. M1030 will be “On” after Y1
pulse output is compeleted. When PLSY and PLSR instruction is “Off”, M1029 and M1030 turn “Off”. You
have to reset M1029 and M1030 after the action is completed.
b) M1029 will be “On” after Y0 and Y1 pulse output of EH2/SVEH3/SV2 is completed. M1030 will be “On” after
Y2 and Y3 pulse output is compeleted. M1036 will be “On” after Y4 and Y5 pulse output of EH2/SV is
completed. M1037 will be “On” after Y6 and Y7 pulse output is completed.When PLSY and PLSR
instruction is “Off”, M1029, M1030, M1036 and M1037 turn “Off”. When the instruction is re-executed for the

2-88

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
next time, M1029, M1030, M1036 and M1037 will turn “Off” and “On” again when the execution is
completed.
3.

API 63 INCD: M1029 will be “On” for a scan period when the assigned group numbers of data are compared.

4.

API 67 RAMP, API 69 SORT:

5.

a)

When the execution of the instruction is completed, M1029= On. You have to reset M1029.

b)

M1029 turns “Off” when the instruction is “Off”.

API 155 DABSR, API 156 ZRN, API 158 DRVI, API 159 DRVA for EH2/SVEH3/SV2 series MPU:
a)

M1029 = On when the 1st output group Y0 and Y1 of EH2/SVEH3/SV2 is completed. M1030 = On when the
2nd output group Y2 and Y3 is completed.

b)

M1036 = On when the 3rd output group Y4 and Y5 of EH2/SV is completed. M1037 = On when the 4th output
group Y6 and Y7 is completed.

c)

When the instruction is re-executed for the next time, M1029 or M1030 will turn “Off” and “On” again when
the execution is completed.

6.

In API 57 PLSY, API 156 DZRN, API 158 DDRVI and API 159 DDRVA for SC series MPU: M1102 will be set On
when Y10 pulse output is completed. M1103 will be set On when Y11 pulse output is completed. After PLSY
instruction is disabled,M1102 and M1103 will be set Off. In DDRVA, DDRVI and DZRN, M1102 and M1103 will
be set Off when next time these instructions are enabled.

Function Group

Communication Error Code

Number

M1025, D1025

Contents:
When HPP, PC or HMI is connected to the PLC and the PLC receives illegal communication request during the
transmission of data, M1025 will be On and the error code will be written in D1025. See the error codes below.
01: Illegal instruction code
02: Illegal device address
03: Requested data exceed the range
07: Checksum error

Function Group

Clear Instruction

Number

M1031, M1032

Contents:
M1031 (clearing non-latched area) , M1032 (clearing latched area)
Device No.

Cleared Device
Contact status of Y, general-purpose M and general-purpose S

M1031

General-purpose contact and timing coil of T
General-purpose contact, counting coil reset coil of C
General-purpose present value register of D

DVP-PLC Application Manual

2-89

2 Functions of Devices in DVP-PLC
Device No.

Cleared Device
General-purpose present value register of T

M1031

General-purpose present value register of C
Contact status of M and S for latched
Contact and timing coil of accumulative timer T
Contac and timing coil of high-speed counter C for latched

M1032

Present value register of D for latched
Present value register of accumulative timer T
Present value register of high-speed counter C for latched

Function Group

Output Latched During STOP

Number

M1033

Contents:
When M1033 = On and PLC goes from “RUN” to “STOP”, the On/Off status of output will be ratained.
Assume the output contact load of the PLC is a heater, when PLC switches from RUN to STOP, the status of the
heater will be retained. After the PLC program is modified, the PLC will RUN again.

Function Group

All Output Y Inhibited

Number

M1034

Contents:
When M1034 = On, all Y outputs will turn “Off”.
M1034

all outputs inhibited

Function Group

RUN/STOP Switch

Number

M1035, D1035

Contents:
1.

When M1035 = On, EH2/SVEH3/SV2 series MPU will determine the content (K0 ~ K15) in D1035 to enable
input points X0 ~ X17 as the RUN/STOP switch.

2.

When M1035 = On, SA/SX/SC series MPU will enable the input point X7 (in SA), X3 (in SX) and X5 (in SC) as
the RUN/STOP switch.

Function Group

Detecting Speed of X0 ~ X5

Number

M1036

Contents:
1. For SC_V1.4 and versions above, SPD can detect the speed of X0 ~ X5 at the same time. The total bandwidth is
40kHz.
2. Program example:
2-90

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
X7
SET

M1036

SPD

X1

K1000

D0

3. Parameter D0 when X7 = On
Start No. of D0

Functions

+ index value
+0

Low 16 bits of the 32-bit speed detected at input point X0.

+1

High 16 bits of the 32-bit speed detected at input point X0.

+2

Low 16 bits of the 32-bit speed detected at input point X1.

+3

High 16 bits of the 32-bit speed detected at input point X1.

+4

Low 16 bits of the 32-bit speed detected at input point X2.

+5

High 16 bits of the 32-bit speed detected at input point X2.

+6

Low 16 bits of the 32-bit speed detected at input point X3.

+7

High 16 bits of the 32-bit speed detected at input point X3.

+8

Low 16 bits of the 32-bit speed detected at input point X4.

+9

High 16 bits of the 32-bit speed detected at input point X4.

+10

Low 16 bits of the 32-bit speed detected at input point X5.

+11

High 16 bits of the 32-bit speed detected at input point X5.

+12

Remaining time for speed detection (unit: ms)

Function Group

X0 Detecting Pulse Width

Number

M1084, D1023

Contents:
When M1084 = On, X0 of ES/EX/SS_V6.4/SA/SX_V1.6/SC_V1.4 can detect pulse width. Whenever X0 turns from
“On” to “Off”, the value is updated once and stored in D1023 (unit: 0.1ms). The minimum detectable width is 0.1ms
and maximum 1,000ms.

Function Group

Two speeds

Number

M1119

Contents:
1. Supports EH2/SV_V2.2/EH3/SV2_V1.0 and versions above.
2. Before the instruction is enabled, M1119 has to be set to On. After the instruction is enabled, M1119 is set to Off
automatically.
3. S1 and S1+1 in DDRVI/DDRVA designates the position of the first speed and the position of the second speed
respectively, S2 and S2+1 designates the fist speed and the second speed respectively.
4. The second speed must be less than the first speed. Otherwise, the first speed is taken.

DVP-PLC Application Manual

2-91

2 Functions of Devices in DVP-PLC
Speed
V(1)

(Hz)

V(2)

P(2)

P(1

Vbas

Vbas
T1

T3

T2

Time(ms)

Vbase

T1

T2+T3

P(1)

V(1)

P(2)

V(2)

Initial
frequency

Acceleration
time

Deceleration
time

Position of
the first
speed

First speed

Position of the
second speed

Second speed

Example:

Explanation:
1. Set P(1) to 1000 pulse, P(2) to 2000 pulse, V(1) to 20kHz, and V(2) to 10kHz.
2. Set M1119 to On.
3. Execute DDRVI/DDRVA.

Function Group

Communication Port Function

Number

M1120, M1136, M1138, M1139, M1143, D1036, D1109, D1120

Contents:
1. Supports ES/EX/SS_V6.0/SA/SX_V1.2/SC_V1.0/SV_V1.0/EH2_V1.0/EH3/SV2_V1.0 and versions above.
2. COM ports (COM1: RS-232; COM2: RS-485) in SA/SX/SC series MPU and COM ports (COM1: RS-232; COM2:
RS-232/RS-485/RS-422) in EH2/EH3/SV2 series MPU support Modbus ASCII/RTU communication format with
speed of up to 115,200bps. COM1 and COM2 can be used at the same time. COM3: RS-232/RS-485 in EH/EH2
2-92

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
series MPU supports Modbus ASCII communication format with speed of up to 38,400bps. The communication
port (COM3: F232RS-232/RS-422) in EH3/SV2 series MPU supports ASCII/RTU communication format with
speed of up to 115,200bps.
COM1:

For slave stations only. Supports ASCII/RTU communication format, adjustable baud rate with
speed of up to 115,200bps, and modification on data length (data bits, parity bits, stop bits).
EH3/SV2 series MPUs can be as a masters or slaves, and supports ASCII/RTU communication
format, adjustable baud rate with speed of up to 115,200bps, and modification on data length (data
bits, parity bits, stop bits).

COM2:

For master or slave stations. Supports ASCII/RTU communication format, adjustable baud rate
with speed of up to 115,200bps, and modification on data length (data bits, parity bits, stop bits).

COM3:

EH2 series MPUs can be used as slaves stations only. Supports ASCII communication format
(data bits, parity bits, stop bits) 7, E, 1, adjustable baud rate with speed of up to 38,400bps. COM2
or COM3 cannot be used for slave stations at the same time.
EH3/SV2 series MPUs can be as a masters or slaves, and supports ASCII/RTU communication
format, adjustable baud rate with speed of up to 115,200bps, and modification on data length (data
bits, parity bits, stop bits).

Communication Format Settings:
COM1:

1. Communication format is set in D1036. b8 ~ b15 do not support the communication protocol of
COM1 (RS-232) Slave.
2. The communication format in EH3/SV2 series MPU is set in D1036. b8 ~ b15 do not support
the communication protocol of COM1 (RS-232) Slave/Master.
3. Communication setting in M1138 remains.
4. M1139 is set in ASCII/RTU mode

COM2:

1. Communication format is set in D1120. Communication protocol of COM2
(RS-232/RS-485/RS-422) Master or Slave
2. The communication format in EH2 series MPU is set in D1120. COM2 (RS-485 or DVP-F232
card/DVP-F422 card) will occupies the communication protocol of original COM2 (RS-485)
Master or Slave.
3. Communication setting in M1120 remains
4. M1143 is set in ASCII/RTU mode

COM3:

1. Communication format is set in D1109. b0 ~ b3 and b8 ~ b15 do not support the
communication protocol of COM3 (DVP-F232 card/DVP-F485S card) Slave
2. The communication format in EH3-SV2 is set in D1109. b0 ~ b3 and b8 ~ b15 do not support
the communication protocol of COM3 Slave or Master.
3. Communication setting in M1136 remains

DVP-PLC Application Manual

2-93

2 Functions of Devices in DVP-PLC
Communication protocols and how to set:
Content
b0

Data length

b1
b2

parity bit

b3

b7 ~ b4

b8
b9
b10

stop bits

0

1

b0 = 0:7
b2, b1 = 00
:
b2, b1 = 01
:
b2, b1 = 11
:
b3 = 0:1 bit

b0 = 1:8
None
Odd
Even
b3 = 1:2 bit

b7 ~ b4 = 0001

(H1)

:

110

bps

b7 ~ b4 = 0010

(H2)

:

150

bps

b7 ~ b4 = 0011

(H3)

:

300

bps

b7 ~ b4 = 0100

(H4)

:

600

bps

b7 ~ b4 = 0101

(H5)

:

1,200

bps

b7 ~ b4 = 0110

(H6)

:

2,400

bps

b7 ~ b4 = 0111

(H7)

:

4,800

bps

b7 ~ b4 = 1000

(H8)

:

9,600

bps

b7 ~ b4 = 1001

(H9)

:

19,200

bps

b7 ~ b4 = 1010

(HA) :

38,400

bps

b7 ~ b4 = 1011

(HB) :

57,600

bps

b7 ~ b4 = 1100

(HC) :

115,200

bps

Select start bit

b8 = 0:None

b8 = 1:D1124

st

b9 = 0:None

b9 = 1:D1125

nd

b10 = 0:None

b10 = 1:D1126

Select the 1 end bit
Select the 2 end bit

b15 ~ b11 Not defined
Example 1: Modifying communication format of COM2
1. Add the program code below on top of the program to modify the communication format of COM2. When PLC
switches from STOP to TUN, the program will detect whether M1120 is On in the first scan time. If M1120 is On,
the program will modify the relevant settings of COM2 according to the value set in D1120.
2. Modify the communication format of COM2 into ASCII mode, 57,600bps, 7 data bits, even parity, 1 stop bit
(57,600, 7, E, 1)
M1002
MOV

H86

SET

M1120

D1120

Notes:
1. If COM2 is to be used as a Slave terminal, make sure there is no communication instruction existing in the
program.
2. After the communication format is modified, the format will stay intact when PLC switches from RUN to
STOP.
3. If you shut down the power of the PLC and repower it again, the modified communication format will return
2-94

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
to default setting.
Example 2: Modifying the communication format of COM1
1. Add the program code below on top of the program to modify the communication format of COM1. When PLC
switches from STOP to TUN, the program will detect whether M1138 is On in the first scan time. If M1138 is On,
the program will modify the relevant settings of COM1 according to the value set in D1036.
2. Modify the communication format of COM1 into ASCII mode, 115,200bps, 7 data bits, even parity, 1 stop bit
(115,200, 7, E, 1)
M1002
MOV

H86

SET

M1138

D1036

Notes:
1.

After the communication format is modified, the format will stay intact when PLC switches from RUN to
STOP.

2.

If you shut down the power of the PLC and repower it again, the modified communication format will return
to default setting.

Example 3: Modifying the communication format of COM3
1. The communication format of COM3 is fixed as 7 data bits, even parity, 1 stop bit. Add the program code below
on top of the program to modify the baud rate of COM3 into 38,400bps. When PLC switches from STOP to TUN,
the program will detect whether M1136 is On in the first scan time. If M1136 is On, the program will modify the
relevant settings of COM3 according to the value set in D1109.
2. Modify the baud rate of COM3 into 38,400bps
M1002
MOV

HA0

SET

M1136

D1109

Notes:
1.

After the communication format is modified, the format will stay intact when PLC switches from RUN to
STOP.

2.

If you shut down the power of the PLC and repower it again, the modified communication format will return
to default setting.

Example 4: Setting up RTU mode of COM1 and COM2
1. COM1 and COM2 support ASCII/RTU mode. COM1 is set by M1139 and COM2 is set by M1143. When the flags
are On, they are in RTU mode; when the flags are Off, they are in ASCII mode.
DVP-PLC Application Manual

2-95

2 Functions of Devices in DVP-PLC
2. How to set up RTU mode
COM1: (9,600, 8, E, 1, RTU)
M1002
MOV

H86

D1036

SET

M1138

SET

M1139

COM2: (9,600, 8, E, 1, RTU)
M1002
MOV

H86

D1120

SET

M1120

SET

M1143

3. EH2/SV/EH3/SV2 series MPU supports the generation of interruption I170 when the data receiving is completed
in Slave mode.
4. Normally when the communication terminal of the PLC is in Slave mode, PLC will not immediately process the
communication data entered but process it after the END is executed. Therefore, when the scan time is very long
and you need the communication data to be processed immediately, you can use interruption I170 for this matter.
5. Example of interruption I170 (after the data receiving is completed in Slave mode)
EI
M1002
MOV

H86

SET

M1120

SET

M1143

D1120

FEND
I170

IRET
END

With I170 in the program, when COM2 is in Slave mode and there are communication data coming in, PLC will
process the data and respond immediately.
Notes:
1. DO NOT updat program on-line when using I170.
2. The scan time of PLC will be slightly longer.
2-96

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC

Function Group

Communication Response Delay

Number

D1038

Contents:
1. When PLC is used as slave station, in RS-485 communication interface, users can set up communication
response delay time ranging from 0 to 10,000 (0 ~ 1 second). If the time is without the range, D1038 = O (time
unit: 0.1ms). The set value of time must be less than that in D1000(scan time-out timer WDT).
2. In PLC LINK, you can set up delayed transmission of the next communication data (unit: 1 scan period for
SA/SX/SC; 0.1ms for EH2/SV/EH3/SV2).

Function Group

Fixed Scan Time

Number

M1039, D1039

Contents:
1.

When M1039 = On, the scan time of program is determined by the content in D1039. When the execution of the
program is completed, the next scan will take place when the fixed scan time is reached. If the content in D1039
is less than the actual scan time of the program, the scan time will follow the actual scan time of the program.
M1000
M1039
Normally On
contact

Fixed scan time

MOV P

K20

D1039

Scan time is fixed to 20ms

2.

Instructions related to scan time, RAMP (API 67), HKY (API 71), SEGL (API 74), ARWS (API 75) and PR (API
77) should be used together with “fixed scan time” or “constant interruption”.

3.

Particularly for HKY instruction, when the 16-digit button input is operated by 4x4 matrix, the scan time has to be
fixed to longer than 20ms.

4.

The scan time in D1010 ~ D1012 also includes fixed scan time.

Function Group

Analog Function

Number

D1056 ~ D1059, D1062, D1110 ~ D1113, D1116 ~ D1118

Contents:
1.

Resolution of analog input channel: 10 bits for EX, corresponding to 0 ~ ±10 V (-512 ~ +511) or 0 ~ ±20 mA
(-512 ~ +511); 12 bits for SX, corresponding to 0 ~ ±10 V (-2,000 ~ +2,000) or 0 ~ ± 20 mA (-1,000 ~ +1,000).

2.

Resolution of analog output channel: 8 bits for EX, corresponding to 0 ~ 10 V (0 ~ 255) or 0 ~ 20 mA (0 ~ 255);
12 bits for SX, corresponding to 0 ~ ±10 V (-2,000 ~ +2,000) or 0 ~ ±20 mA (-2,000 ~ +2,000).

3.

Sampling time of analog/digital conversion. Default setting = 5; unit: ms. If D1118 ≤ 5, it will be regarded as 5ms.

4.

Resolution of EH2/SV/EH3/SV2 analog input AD card (DVP-F2AD): 12 bits 0 ~ 10 V (0 ~ +4,000) or 11 bits 0 ~
20 mA (0~+2,000)

5.

Resolution of EH2/SV/EH3/SV2 analog input DA card (DVP-F2DA): 12 bits 0 ~ 10 V (0 ~ +4,000) or 0 ~ 20 mA
(0 ~ +4,000)

DVP-PLC Application Manual

2-97

2 Functions of Devices in DVP-PLC
Device No.

Function

D1056

Present value of EX/SX analog input channel CH0 and EH2/EH3/SV2 AD card channel CH0

D1057

Present value of EX/SX analog input channel CH1 and EH2/EH3/SV2 AD card channel CH1

D1058

Present value of EX analog input channel CH 2

D1059

Present value of EX analog input channel CH 3

D1062

Average times (2 ~ 4) of SX AD0 and AD1

D1110

Average value of EX/SX analog input channel CH0 and EH2/EH3/SV2 AD card channel CH0

D1111

Average value of EX/SX analog input channel CH1 and EH2/EH3/SV2 AD card channel CH1

D1112

Average value of EX analog input channel CH2

D1113

Average value of EX analog input channel CH3

D1116

EX/SX analog output channel CH0 and EH2/EH3/SV2 DA card channel CH0

D1117

EX/SX analog output channel CH1 and EH2/EH3/SV2 DA card channel CH1

D1118

Sampling time (ms) of SX/EX/EH2/EH3/SV2 analog/digital conversion

Function Group

Reading/Writing the data from/into the memory card

Number

M1163, D1063

Contents:
The reading/writing of the data between the EH2 series MPU and the memory card:
M1163 state

D1063 code
0x55AA

0x55A9
On
0xAA55

0xA955

Function
The program is read from the memory card, and
copied to the main operation area in the MPU.
The data is read from the memory card, and copied to
the main operation area in the MPU.
The program in the main operation area in the MPU is
copied to the memory card.
The data in the main operation area in the MPU is
copied to the memory card.

Note:
1. After the reading/writing of the data is complete, M1163 is automatically set to Off. After the reading/writing of the
data is complete, the following flags are On.
M1189 Æ The data which is read/written is correct.
M1075 Æ An error occurs when the data is written into the memory card. Please check if the memory card is
inserted or damaged.
M1005 Æ The PLC ID on the MPU or the main password is different from the memory card.
M1006 Æ No data or program is in the memory card.
2. Enter the function code in D1063 first, and then set M1163 to On. Otherwise, M1163 is automatically reset to Off.
3. If an error occurs during the reading/writing of the data, the specila M will be set. No error LED indicator will flash
or no situation in which the MPU can not run occurs. Therefore, if customers need an alarm, please make the
warning message on the device or superior machine according to the flags above.
2-98

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
4. Owing to the fact that the storage material of the memory card is Flash ROM, it takes some execution time to
write the data into the memory card.
5. When the program is copied, the MPU automatically copies the password function (including the main password,
the limit on the number of errors, the subroutine password, and the PLC ID).
6. The reading/writing of the data between the EH3/SV2 series MPU and the memory card:
M1163 state

D1063 code
0x55AB

0x55AA

Function
The data is read from the memory card, and copied to
the main operation area in the MPU.
The program code is read from the memory card, and
copied to the main operation area in the MPU.
The data in D2000~D11999 and file registers 0~4999

0x55A9

are read and copied to the main operation area in the
MPU.

On
0xAB55
0xAA55
0xA955
0x8888

The data in the main operation area in the MPU is
copied to the memory card.
The program in the MPU is copied to the memory card.
The data in D2000~D11999 in the main operation area
in the MPU is copied to the memory card.
Clearing the data in the memory card

Note:
1. After the reading/writing of the data is complete, M1163 is automatically set to Off. After the reading/writing of the
data is complete, the following flags are On.
M1189 Æ The data which is read/written is correct.
M1075 Æ An error occurs when the data is written into the memory card. Please check if the memory card is
inserted or damaged.
M1005 Æ The PLC ID on the MPU or the main password is different from the memory card.
M1006 Æ No data or program is in the memory card.
2. Enter the function code in D1063 first, and then set M1163 to On. Otherwise, M1163 is automatically reset to Off.
3. If an error occurs during the reading/writing of the data, the specila M will be set. No error LED indicator will flash
or no situation in which the MPU can not run occurs. Therefore, if customers need an alarm, please make the
warning message on the device or superior machine according to the flags above.
4. Owing to the fact that the storage material of the memory card is Flash ROM, it takes some execution time to
write the data into the memory card.
5. When the program is copied, the MPU automatically copies the password function (including the main password,
the limit on the number of errors, the subroutine password, and the PLC ID).

DVP-PLC Application Manual

2-99

2 Functions of Devices in DVP-PLC
Function Group

Reading/Writing the data from/into the backup area

Number

M1067 ~ M1068, D1067 ~ D1068

Contents:
1.

The reading/writing of the data between the EH2 series MPU and the backup area:
M1164 state

D1064 code

Function
The program and the data in D2000~D9999 are read

0x55AA

from the backup area, and copied to the main
operation area.

On
0xAA55

The program and the data in D2000~D9999 in the main
operation area are copied to the backup area.

Note:
1. After the reading/writing of the data is complete, M1164 is automatically set to Off. After the reading/writing of the
data is complete, the following flags are On.
M1189 Æ The data which is read/written is correct.
M1075 Æ An error occurs when the data is written into the backup area. Before replacing the PLC, please read
the program and the data form the main operation area first.
2. Enter the function code in D1064 first, and then set M1164 to On. Otherwise, M1164 is automatically reset to Off.
3. If an error occurs during the reading/writing of the data, the specila M will be set. No error LED indicator will flash
or no situation in which the MPU can not run occurs. Therefore, if customers need an alarm, please make the
warning message on the device or superior machine according to the flags above.
4. Owing to the fact that the storage material of the backup area is Flash ROM, it takes some execution time to write
the data into the memory card.
5. When the program is copied, the MPU automatically copies the password function (including the main password,
the limit on the number of errors, the subroutine password, and the PLC ID).
6. The reading/writing of the data between the EH3/SV2 series MPU and the backup area:
M1164 state

D1064 code

Function
The program and the data in D2000~D9999 are read

On

0x55AA

from the backup area, and copied to the main
operation area.
The program is read from the backup area, and copied

On

0x55A9

to the main operation area in the MPU.
The data is read from D2000~D11999 in the backup

0x55AB

area, and copied to the main operation area in the
MPU.

0xAA55

0xA955
2-100

The program and the data in D2000~D9999 in the main
operation area are copied to the backup area.
The program in the main operation area is copied to
the backup area.
DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
M1164 state

D1064 code
0xAB55
0x8888

Function
The data in D2000~D11999 in the operation area is
copied to the backup area.
The data in the bakup area is cleared.

Note:
1. After the reading/writing of the data is complete, M1164 is automatically set to Off. After the reading/writing of the
data is complete, the following flags are On.
M1189 Æ The data which is read/written is correct.
M1075 Æ An error occurs when the data is written into the backup area. Before replacing the PLC, please read
the program and the data form the main operation area first.
M1006 Æ No data or program is in the memory card.
2. Enter the function code in D1064 first, and then set M1164 to On. Otherwise, M1164 is automatically reset to Off.
3. If an error occurs during the reading/writing of the data, the specila M will be set. No error LED indicator will flash
or no situation in which the MPU can not run occurs. Therefore, if customers need an alarm, please make the
warning message on the device or superior machine according to the flags above.
4. Owing to the fact that the storage material of the backup area is Flash ROM, it takes some execution time to write
the data into the memory card.
5. When the program is copied, the MPU automatically copies the password function (including the main password,
the limit on the number of errors, the subroutine password, and the PLC ID).

Function Group

Operational Error Flag

Number

M1067 ~ M1068, D1067 ~ D1068

Contents:
1.

Operational error flag:
Device

2.

Description

Latched

STOP → RUN

RUN → STOP

M1067

Operational error flag

None

Cleared

Latched

M1068

Operational error locked flag

None

Latched

Latched

D1067

Operational error code

None

Cleared

Latched

D1068

STEP value when operational error occurs

None

Latched

Latched

Error code explanation:
D1067 error code

Cause

H’ 0E18

BCD conversion error

H’ 0E19

Divisor is 0

H’ 0E1A

Use of device exceeds the range (including E, F index register modification)

H’ 0E1B

Square root value is negative

H’ 0E1C

FROM/TO instruction communication error

DVP-PLC Application Manual

2-101

2 Functions of Devices in DVP-PLC
Function Group

Low Voltage

Number

M1087, D1100

Contents:
1.

When PLC detects LV (Low Voltage) signal, it will check if M1087 is “On” or not. If M1087 is “On”, the content in
D1100 will be stored in Y0 ~ Y17.

2.

bit0 (LSB) of D1100 corresponds to Y0, bit1 corresponds to Y1, bit8 corresponds to Y10 and so on.

Function Group

File Register

Number

M1101, D1101 ~ D1103

Contents:
1.

When the power of PLC turns from “Off” to “On”, PLC determines whether to automatically send the content in
the file register to the assigned data register by checking M1101, D1101 ~ D1103 (for SA/SX/SC/
EH2/SV/EH3/SV2).
M1101:
D1101:
D1102:
D1103:

2.

Whether to automatically downland data from file register
Start No. of file register K0 ~ K1,599 (for SA/SX/SC)
Start No. of file register K0 ~ K9,999 (for EH2/SV/EH3/SV2)
Number of data read from file register K0 ~ K1,600 (for SA/SX/SC)
Number of data read from file register K0 ~ K8,000 (for EH2/SV/EH3/SV2)
Location for storing data read from file register
Start No. of assigned data register D K2,000 ~ K4,999 (for SA/SX/SC)
Start No. of assigned data register D K2,000 ~ K9,999 (for EH2/SV/EH3/SV2)

See API 148 MEMR and API 149 MEMW for more details.

Function Group

DIP Switch Function Card

Number

M1104 ~ M1111

Contents:
1.

When PLC is in RUN status with digital switch function card inserted, the 8 DIP switches amd their status
orrespond respectively to M1104 ~ M1111.

2.

See API 109 SWRD for more details.

3.

When PLC is in RUN status with 4DI card inserted into the input AX0 (photocoupler isolation), the status of AX0
~ AX3 correspond respectively to M1104 ~ M1107.

Function Group

Transistor Output Function Card

Number

M1112, M1113

Contents:
When PLC is in RUN status with 2DO function card inserted, M1112 and M1113 will correspond respectively to 2
transistors output points, AY0 and AY1.

2-102

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Function Group

Pulse Output With Speed Acceleration/Deceleration

Number

M1115 ~ M1119, D1104

Contents:
1.

Special D and special M for acceleration/ deceleration of speed pulse output for ES/EX/SS/SA/SX/SC (not
applicable to SC_V1.4 and versions above):
Device No.

2.

Function

M1115

Activation switch

M1116

“Accelerating” flag

M1117

“Target frequency reached” flag

M1118

“Decelerating” flag

M1119

“Function completed” flag

D1104

Start No. of control register (D)

Parameters for D1104 (frequency range: 25Hz ~ 10kHz)
Index

Function

+0

Start frequency (SF)

+1

Gap frequency (GF)

+2

Target frequency (TF)

+3

The lower 16 bits of the 32 bits for the total number of output pulses

+4

The higher 16 bits of the 32 bits for the total number of output pulses
The lower 16 bits of the 32 bits for the total number of output pulses in

+5

accelerating/decelerating section
The higher 16 bits of the 32 bits for the total number of output pulses in

+6
3.

(TP)

(AP)

accelerating/decelerating section

No instruction is needed, users need only to fill out the parameter table and enable M1115 (in RUN mode). This
functio only supports Y0 output and the timing chart is as below.

Number of accel/decel sections = (TF-SF)/GF
GF
Number of output pulses in every section:
GP = AP/Number of accel/decel sections

Frequency
GP
TF

SF
AP

4.

AP

Number of pulses
AP = number of accel/decel pulses

Note: this function is applicable only when “all” the conditions below are met.
a) Start frequency < target frequency.

DVP-PLC Application Manual

2-103

2 Functions of Devices in DVP-PLC
b) Gap frequency ≤ (target frequency – start frequency)
c) Total number of pulses > (accel/decel number of pulses × 2)
d) For start frequency and target frequency: Min. 25Hz; Max. 10kHz
e) Number of accel/decel pulses > number of accel/decel sections
When M1115 turns from “On” to “Off”, M1119 will be reset and M1116, M1117 and M1118 remain unchanged. When
PLC goes from “STOP” to “RUN”, M1115 ~ M1119 will be reset as “Off”. D1104 will only be cleared as “0” when it
turns from “Off” to “On”.
Either accel/decel pulse output function or PLSY Y0 output can be executed at a time when PLC is operating.
5.

How to calculate the action time of each section
Assume the start frequency is set as 1kHz, gap frequency as 1kHz, target frequency as 5kHz, total number of
pulses as 100 and number of acceleration pulses as 40, the timing diagram of the acceleration sections is as the
figure below.
Frequency (Hz)

5,000
4,000
3,000
2,000
1,000
Time (sec)
t1

t2

t3 t 4

From the conditions above, we can obtain the number of acceleration/deceleration sections is (5K – 1K)/1K = 4
and the number of output pulses in each section is 40/4 = 10. Therefore, in the diagram, t1 = (1/1K) × 10 = 10ms,
t2 = (1/2K) × 10 = 5ms, t3 = (1/3K) × 10 = 3.33ms, t4 = (1/4K) × 10 = 2.5ms.
6.

Program example: Forward/reverse acceleration/deceleration step motor control
M1002
D500 ~ D506 as parameter addresses

MOV

K500

D1104

MOV

K1000

D500

Start frequency: 1KHz

MOV

K100

D501

Interval frequency: 100Hz

MOV

K10000

D502

Target frequency: 10KHz

DMOV

K80000

D503

Number of output pulses: 80,000

DMOV

K10000

D505

Number of pulses in accel/decel section: 10,000

SET

M1115

a) When PLC is in RUN status, store all parameter settings into the registers designated in D1104.
b) When M1115 = On, the acceleration/deceleration pulse output will start.

2-104

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
c) M1116 = On in the acceleration process. When the speed reaches its target, M1117 will be On. M1118 = On
in the deceleration process. When the speed reaches its target, M1119 will be On.
d) M1115 will not be reset automatically. You have to check the conditions during the process and reset it.
e) Pulse output curves:
Frequency (Hz)
10K

1K
10,000

70,000

80,000

8,606

11,213

Number
of pulses

Frequency (Hz)
10K

1K
2,606

Time (ms)

Function Group

Special High-Speed Pulse Output

Number

M1133 ~ M1135, D1133

Contents:
1.

Special D and special M for special high-speed pulse Y0 (50kHz)for SA/SX/SC (not applicable to SC_V1.4 and
versions above):
No.

2.

Function

M1133

Output switch for special high-speed pulse Y0 (50kHz) (On = enabled)

M1134

On = Continuous output switch for special high-speed pulse Y0 (50kHz)

M1135

“Number of pulses reached” flag for special high-speed pulse Y0 (50kHz)

D1133

Start No. of control register (D) for special high-speed pulse Y0 (50kHz)

Parameters for D1133:
Index

Function

+0

The lower 16 bits of the 32 bits for output frequency of special high-speed pulse Y0

+1

The higher 16 bits of the 32 bits for output frequency of special high-speed pulse Y0

+2

The lower 16 bits of the 32 bits for number of output pulses of special high-speed pulse Y0

+3

The higher 16 bits of the 32 bits for number of output pulses of special high-speed pulse Y0

+4

The lower 16 bits of the 32 bits of the present number of special high-speed pulses Y0

DVP-PLC Application Manual

2-105

2 Functions of Devices in DVP-PLC
Index
+5
3.

Function
The higher 16 bits of the 32 bits of the present number of special high-speed pulses Y0

The function:
All output frequency and number of pulses stated in the table above can be modified when M1133 = On and
M1135 = On. The modification will not affect the present output pulses. The present number of output pulses is
updated in every scan time. When M1133 turns from “Off” to “on”, the number will be cleared as “0”. When 1133
turns from “On” to “Off”, the last numner of output pulses will be shown.

Note:
The special high-speed pulse output function can only be used on specific Y0 output point when PLC is in RUN status.
It can coexist with PLSY (Y0) in the program and PLSY (Y1) will not be affected. If PLSY (Y0) instruction is executed
prior to this function, the function cannot be used and vice versa. When the function is executed, the general function,
general Y0 output will be invalid but Y1 ~ Y7 can be used.
The output frequency of this function is higher (max. 50kHz) than that of PLSY instruction.

Function Group

2-axis Synchronous Control (PH)

Number

M1133, M1135, D1133 ~ D1136

Contents:
1.

Special D and special M for 2-axis synchronous drawing oblique and arc for SC_V1.4 and versions above:
Device No.

2.

Function

M1133

Start flag for Y10 output for two-axis synchronous control

M1135

Start flag for Y11 output for two-axis synchronous control

D1133

Start No. of control register (D) for Y10 output for two-axis synchronous control

D1134

Number of sections for Y10 output for two-axis synchronous control

D1135

Start No. of control register (D) for Y11 output for two-axis synchronous control

D1136

Number of sections for Y11 output for two-axis synchronous control

Parameters for D1133, D1135:
Index
+0

Y10, Y11 2-axis synchronous control; output frequency of 1st section = low 16 bits of 32 bits

+1

Y10, Y11 2-axis synchronous control; output frequency of 1st section = high 16 bits of 32 bits

+2

Y10, Y11 2-axis synchronous control; output pulse number of 1st section = low 16 bits of 32 bits

+3
3.

Function

Y10, Y11 2-axis synchronous control; output pulse number of 1st section = high 16 bits of 32
bits

The functions:
a)

Definition of the 2 axes:
X axis: Y0 (direction output) and Y10 (pulse output)
Y axis: Y1 (direction output) and Y11 (pulse output)

b)

Define the format of output table:
Assume D1133 = K100 and D1134 = K3 and the output table has to be set as:

2-106

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Section No.

Device D

Output
frequency

Device D

Number of
Output pulses

1

D101,D100

K10,000

D103,D102

K1,000

Section 1 outputs 1,000 pulses in 10kHz

2

D105,D104

K15,000

D107,D106

K2,000

Section 2 outputs 2,000 pulses in 15kHz

3

D109,D108

K5,000

D111,D110

K3,000

Section 3 outputs 3,000 pulses in 5kHz

Description

Note: The frequency and number of output pulses are all in 32-bit. Thus, the 3 sections will continuously
occupy 12 D devices (3 × 2 × 2 = 12).
4.

Note:
a)

Make sure that the output frequency and the number of pulses have been set before using this function.
The output frequency and the number of pulses cannot be modified during the execution of the function.

b)

When PLC program scans to END instruction, it will auto-check whether this function needs to be enabled.

c)

When M1133 and M1135 are set in the same scan period, the two axes will output pulses synchronously.

d)

When the output frequency < 100Hz, the output will be executed in 100Hz. When the output frequency >
100kHz, the output will be executed by 100kHz.

e)

Only device D (D0 ~ D999 and D2000 ~ D4999) can be used for this function. DO NOT use other devices
or exceed the range of device D.

f)

The maximum number of segments for this function is 50. When the number of segments < 1 or > 50, this
function will be disabled.

g)

After this function is enabled, M1102 = “On” indicates Y10 output is completed and M1103 = “On” indicates
Y11 output is completed.

5.

Examples:
a)

Draw oblique lines in 2 axes
Destination: Draw 2 oblique lines (as figure 1)
Program explanation: Y0 and Y10 belong to X axis, and Y1 and Y11 belong to Y axis (as figure 2)
Output frequency and number of pulses: see table 1

Y
Section 2

(5,000, 4,000)

(1,000, 3,000)

X

(0,0)
Section 1

DVP-PLC Application Manual

Section 2

(Figure 1)

2-107

2 Functions of Devices in DVP-PLC
M1002
MOV

K200

D1133

MOV

K2

D1134

MOV

K300

D1135

MOV

K2

D1136

M0
Y0
M1133
Y1
M1135

(Figure 2)

Axis
X

Y

Section

Device D

Output frequency

Device D

Number of output pulses

1

D201, D200

K1,000

D203, D202

K1,000

2

D205, D204

K4,000

D207, D206

K4,000

1

D301, D300

K3,000

D303, D302

K3,000

2

D305, D304

K1,000

D307, D306

K1,000

(Table 1)
b)

Draw an arc in 2 axes
Destination: Draw a 90° arc (see Figure 3)
Program explanation: Same as the the example of draw oblique lines, except that D1134 and D1136 are
modified as K10 (output 10 sections)
Output frequency and number of pulses: see table 2

Y
(50,000, 50,000)

(0,0)

2-108

X
10 sections

(Figure 3)

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Axis

Section

Device D

Output frequency

Device D

Number of output pulses

1

D201, D200

K1,230

D203, D202

K615

2

D205, D204

K3,664

D207, D206

K1,832

3

D209, D208

K6,004

D211, D210

K3,002

4

D213, D212

K8,200

D215, D214

K4,100

5

D217, D216

K10,190

D219, D218

K5,095

6

D221, D220

K11,932

D223, D222

K5,966

7

D225, D224

K13,380

D227, D226

K6,690

8

D229, D228

K14,498

D231, D230

K7,249

9

D233, D232

K15,258

D235, D234

K7,629

10

D237, D236

K15,644

D239, D238

K7,822

1

D301, D300

K15,644

D303, D302

K7,822

2

D305, D304

K15,258

D307, D306

K7,629

3

D309, D308

K14,498

D311, D310

K7,249

4

D313, D312

K13,380

D315, D314

K6,690

5

D317, D316

K11,932

D319, D318

K5,966

6

D321, D320

K10,190

D323, D322

K5,095

7

D325, D324

K8,200

D327, D326

K4,100

8

D329, D328

K6,004

D331, D330

K3,002

9

D333, D332

K3,664

D335, D334

K1,832

10

D337,D336

K1,230

D339, D338

K615

X

Y

(Table 2)
c)

Draw arcs in the four quadrants
Destination: Draw four 90° arcs (see Figure 4)
Program explanation: When the direction signal is On, the direction will be a positive one; when the
direction signal is Off, the direction will be a negative one (see Figure 5)
Output frequency and number of pulses: see Table 2

Y
(-50,000, 50,000)

(50,000, 50,000)

Y0=Off
Y1=On

Y0=On
Y1=On
Quadrant II

Y0=Off
Y1=Off

(0,0)
Quadrant III

(-50,000, -50,000)

DVP-PLC Application Manual

Quadrant I

X

Quadrant IV
Y0=On
Y1=Off

(50 000, -50,000)

(Figure 4)

2-109

2 Functions of Devices in DVP-PLC
M1002
MOV

K200

D1133

MOV

K10

D1134

MOV

K300

D1135

MOV

K10

D1136

SET

Y0

SET

Y1

RST

Y0

SET

Y1

RST

Y0

RST

Y1

SET

Y0

RST

Y1

M1

M2

M3

M4

M0
M1133
M1135

(Figure 5)

M0, M1 = On refers to drawing a 90° arc in Quadrant I; M0, M2 = On refers to drawing a 90° arc in Quadrant II;
M0, M3 = On refers to drawing a 90° arc in Quadrant III; M0, M4 = On refers to drawing a 90° arc in Quadrant
IV.
The four 90° arcs are drawn when acceleration in X and deceleration in Y. To draw the arcs when
deceleration in X and acceleration in X, modify the program into Figure 6, i.e. D1333 = K300 and D1335 =
K200.

2-110

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
M1002
MOV

K300

D1133

MOV

K10

D1134

MOV

K200

D1135

MOV

K10

D1136

SET

Y0

SET

Y1

RST

Y0

SET

Y1

RST

Y0

RST

Y1

SET

Y0

RST

Y1

M1

M2

M3

M4

M0
M1133
M1135

(Figure 6)

M0, M1 = On refers to drawing a 90° arc in Quadrant I; M0, M2 = On refers to drawing a 90° arc in Quadrant II;
M0, M3 = On refers to drawing a 90° arc in Quadrant III; M0, M4 = On refers to drawing a 90° arc in Quadrant
IV. (See Figure 7)

Y
(50,000, 50,000)

(-50,000, 50,000)

Y0=Off

Quadrant II

Quadrant I

Y1=On

X

(0,0)
Y0=Off
Y1=Off

Y0=On
Quadrant IV

(-50,000, -50,000)

d)

Y0=On
Y1=On

Quadrant III

Y1=Off

(50,000, -50,000)

(Figure 7)

Draw a circle
Destination: Extract four 90° arcs from Ffigure 4 and Figure 7 and combine them into a circle (see Figure
8).

DVP-PLC Application Manual

2-111

2 Functions of Devices in DVP-PLC
Program explanation: When the direction control pin is On, the direction will be a positive one; otherwier, it
will be a negative one (see Figure 9). When X0 = On, D0 will accumulate once and the 2 axes will draw a
90° arc.
Output frequency and number of pulses: see Table 2.

Y
(50,000, 50,000)
D0=K1

D0=K2

(0,0)

(10,000, 0)

X

D0=K3

D0=K4
(50,000, -50,000)

(Figure 8)

M1002
MOV

K10

D1134

MOV

K10

D1136

MOV

K0

D0

INC

D0

SET

Y0

SET

Y1

MOV

K200

D1133

MOV

K300

D1135

SET

Y0

RST

Y1

MOV

K300

D1133

MOV

K200

D1135

X0

= D0 K1

= D0 K2

2-112

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
= D0 K3

= D0 K4

RST

Y0

RST

Y1

MOV

K200

D1133

MOV

K300

D1135

RST

Y0

SET

Y1

MOV

K300

D1133

MOV

K200

D1135

X0
M1133
M1135

e)

(Figure 9)

Calculate the frequency and number of output pulses in each section
Destination: Draw 10 sections of arcs clockwise until they reach (50,000, 50,000) (see Figure 10)
Rx = target value in X; Ry = target value in Y; N = number of sections; π = 3.1416

Y
(0,Ry)
(x7,y7)

(x9,y9) (x10,y10)

(x8,y8)
(x6,y6)
(x5,y5)
(x4,y4)
(x3,y3)
(x2,y2)
(x1,y1)
(0,0)

(Rx,0)

X
(Figure 10)

Step 1: Calculate the position for each section
x1 = Rx – Rx × sin [(N-1) × π ÷ (2 × N)]
x2 = Rx – Rx × sin [(N-2) × π ÷ (2 × N)] …. See Table 3
y1 = Ry × sin [1 × π ÷ (2 × N)]
y2 = Ry × sin [2 × π ÷ (2 × N)]…. See Table 4
Position
With decimal
point
Without
decimal point

DVP-PLC Application Manual

x1

x2

x3

x4

x5

615.55

2,447.12

5,449.61

9,549.08

14,464.59

615

2,447

5,449

9,549

14,464

2-113

2 Functions of Devices in DVP-PLC
Position
With decimal
point
Without
decimal point

x6

x7

x8

x9

x10 (RX)

20,610.67

27,300.42

34,549.11

42,178.25

50,000

20,610

27,300

34,549

42,178

50,000

(Table 3)
Position
With decimal
point
Without
decimal point

y1

y2

y3

y4

y5

7,821.74

15,450.88

22,699.57

29,389.32

35,355.40

7,821

15,450

22,699

29,389

35,355

y6

y7

y8

y9

y10 (Ry)

40,450.91

44,550.38

47,552.87

49,384.44

50,000

40,450

44,550

47,552

49,384

50,000

Position
With decimal
point
Without
decimal point

(Table 4)
Step 2: Calculate the distance (number of pulses) between every section
In X axis: x1 = x1 – 0, x2 = x2 – x1, ... x10 = x10 – x9 (see Table 5)
In Y axis: y1 = y1 – 0, y2 = y2 – y1, … y10 = y10 – y9 (see Table 5)
Position

x1

x2

x3

x4

x5

x6

x7

x8

x9

x10

Number of pulses

615

1,832

3,002

4,100

5,095

5,966

6,690

7,249

7,629

7,822

Position

y1

y2

y3

y4

y5

y6

y7

y8

y9

y10

Number of pulses

7,821

7,629

7,249

6,690

5,966

5,095

4,100

3,002

1,832

616

(Table 5)
Step 3: Decide the execution time of every section and obtain the frequency of every section by Table 5
Assume every section executes for 500ms, the equation for frequency (Hz) of each section is: fx1 = 1÷0.5 ×

x1、fx2 =1÷0.5 × x2…(see Table 6)
Position

fx1

fx2

fx3

Frequency

1,230

3,664

6,004

Position

fy1

fy2

fy3

Frequency

fx4

fx5

fx6

fx7

fx8

fx9

fx10

8,200 10,190 11,932 13,380 14,498 15,258 15,644
fy4

fy5

fy6

fy7

15,642 15,258 14,498 13,380 11,932 10,190 8,200

fy8

fy9

fy10

6,004

3,644

1,232

(Table 6)
Step 4: Fill Device D into table 2 and complete all steps.
Reminder 1: When Rx=Ry, you can calculate X axis, and copy X axis to Y axis (as fy1 = fx10, fy2 =
fx9, …fy10 = fx1,and y1 = x10, y2 = x9,…y10 = x1 )
Reminder 2: When drawing a counterclockwise arc, switch the index value of X axis with that of Y axis.

Function Group

Detecting Extension

Number

D1140, D1142, D1143, D1145

Contents:
1. D1140: Number of special right-side extension modules (AD, DA, XA, PT, TC…); Max. 8
2. D1142: Number of X input points on digital extension device
3. D1143: Number of Y output points on digital extension device
2-114

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
4. D1145: Number of special left-side extension modules (AD, DA, XA, PT, TC…); Max. 8 (available in SV only)

Function Group

Adjustable Pulse Speed Acceleration/Deceleration

Number

M1144 ~ M1149, M1154, D1030, D1031, D1144, D1154, D1155

Contents:
1. Special D and special M of Y0 adjustable pulse speed acceleration/deceleration for SA/SX/SC:
Device No.

Function

M1144

Activation switch for Y0 adjustable pulse speed acceleration/deceleration

M1145

Accerlerating flag for Y0 adjustable pulse speed acceleration/deceleration

M1146

“Target frequency reached” flag for Y0 adjustable pulse speed acceleration/deceleration

M1147

“Decerlerating” flag for Y0 adjustable pulse speed acceleration/deceleration

M1148

“Function completed” flag for Y0 adjustable pulse speed acceleration/deceleration

M1149

“Counting temporarily stops” flag for Y0 adjustable pulse speed acceleration/deceleration

M1154

“Enabling deceleration” flag for Y0 adjustable pulse speed acceleration/deceleration

D1030

The lower 16 bits in the 32-bit data register for accumulative Y0 output pulses

D1031

The higher 16 bits in the 32-bit data register for accumulative Y0 output pulses

D1144

Starting No. of the register (D) for Y0 adjustable pulse speed acceleration/deceleration

D1154

Recommended value for indicated gap time of deceleration(10 ~ 32,767 ms)

D1155

Recommended value for indicated gap frequency of deceleration (-1 ~ -32,700 Hz)

2. Parameters for D1144:
Index

Function

+0

Total number of sections (n) (max. 10)

+1

Currently executed section (read only)

+2

Start frequency of the 1st section (SF1)

+3

Gap time of the 1st section (GT1)

+4

Gap frequency of the 1st section (GF1)

+5

Target frequency of the 1st section (TF1)

+6

The lower 16 bits of the 32 bits for the target number of output pulses in the 1st section (SE1)

+7

The higher 16 bits of the 32 bits for the target number of output pulses in the 1st section (SE1)

+8

Start frequency of the 2nd section (SF2); Cannot be the same as TF1

+9

Gap time of the 2nd section (GT2)

+ 10

Gap frequency of the 2nd section (GF2)

+ 11

Target frequency of the 2nd section (TF2)

+ 12

The lower 16 bits of the 32 bits for the target number of output pulses in the 2nd section (SE2)

+ 13

The higher 16 bits of the 32 bits for the target number of output pulses in the 2nd section (SE2)

:
+ n*6 + 2
+ n*6 + 3

:
Start frequency of the nth section (SFn); Cannot be the same as the start frequency of the n-1th
section (TFn-1)
Gap time of the nth section (GTn)

DVP-PLC Application Manual

2-115

2 Functions of Devices in DVP-PLC
Index

Function
th

+ n*6 + 4

Gap frequency of the n section (GFn)

+ n*6 + 5

Target frequency of the nth section (TFn)

+ n*6 + 6

The lower 16 bits of the 32 bits for the target number of output pulses in the nth section (SEn)

+ n*6 + 7

The higher 16 bits of the 32 bits for the target number of output pulses in the nth section (SEn)

3. The functions:
This function can only be used on Y0 output point and the timing chart is as follows. After filling out the
parameter table, setup M1144 to start the function (should be applied in RUN mode).

GF
GF

Frequency(Hz)

GT
TF2
GT

SF3
SF2

TF3

TF1

SF4
TF4

SF1
Time(ms)

1st section
number of
pulses
(SE1)

2nd section
number of
pulses
(SE2)

3rd section 4th section
number of number of
pulses
pulses
(SE4)
(SE3)

4. How to use and the restrictions:
a) The start frequency and target frequency have to be ≥ 200Hz; otherwise, the function will not be executed or
complete execution.
b) The start frequency and target frequency have to be < 32,700Hz. Frequency > 32,700Hz will be executed in
32,700Hz.
c) Range of gap time: 1 ~ 32,767ms (Min. unit: ms)
d) The range of gap frequency within acceleration section: 1Hz ~ 32,700Hz; within deceleration section: -1 ~
-32,700Hz. If the gap frequency is set as 0Hz, it will fail to reach target frequency in the executed section but
in the next section when the target number of pulses is reached.
e) The target number of pulses in a section has to be > (GF × GT/1,000) × [(TF - SF)/GF]; otherwise the target
may not be reached. To correct it, the user may extend gap time or increase the target number of pulses.
f)

When PLC is in RUN status and there is a high-speed instruction assigning Y0 input, the instruction will be
executed prior to other instructions.

g) After M1144 = On, if M1148 has not be reached and M1144 is “Off”, deceleration will be enabled. And if
M1154 = Off at the moment, the deceleration rule will be “decelerating 200Hz every 200ms” and M1147 will
be set. The pulse output will stop when the frequency falls under 200Hz. If M1154 = On at the moment, the
output will be executed following the gap time and frequency as set by the user. The time shall not be ≤ 0 (if ≤

2-116

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
0, it will follow the initial setting 200ms) and the frequency shall not be ≥ 0 (if = 0, it will follow the initial setting
-1kHz; if > 0, negative sign comes before the value).
h) When M1148 = On but M1144 = Off, deceleration will not be enabled and M1148 will be reset. Whenever
M1144 = Off, M1149 will be reset.
i)

The number of sections being executed is determined upon the total number of sections. (Max. number of
sections = 10)

j)

Acceleration or deceleration is determined upon the start frequency of the next section. That is, if the target
frequency of the current section < the start frequency of the next section, acceleration will take place in the
next section and the target frequency of the next section must > its start frequency. If the target frequency of
the current section > the start frequency of the next section, deceleration will take place in the next section
and the target frequency of the next section must < its start frequency. Correct pulse output cannot be
guaranteed if the user does not follow the rules.

k) When PLC goes from STOP to RUN, M1144 ~ M1149 will be reset to “Off”. When PLC goes from RUN to
STOP, only M1144 will be reset, not M1145 ~ M1149.
l)

SA/SX/SC uses parameter table D0 ~ D999 and D2000 ~ D4999. If the used parameter table (including all
the used section parameters) falls off the range, the instruction will not be executed and M1144 will be “Off”.

5. Example 1: Calculate the number of output pulses in every acceleration/deceleration section
Assume you set the start frequency of a section as 200Hz, gap time as 100ms, gap frequency as 100Hz, target
frequency as 500Hz, and target number of pulses as 1,000:
The number of output pulses at start frequency = 200 × 100 / 1,000 = 20
The number of output pulses in the first acceleration gap = 300 × 100 / 1,000 = 30
The number of output pulses in the second acceleration gap = 400 × 100 / 1,000 = 40
The number of output pulses at target frequency = 1,000 – (40 + 30 + 20) = 910
(Please be noted that we suggest this number be bigger than 10.)
Output time for target frequency = 1 / 500 × 910 = 1,820 ms
Total time spent for this section = 1,820 + 3 × 100 = 2,120 ms
6. Example 2: Pulse output program for 1 acceleration section and 1 deceleration section

DVP-PLC Application Manual

2-117

2 Functions of Devices in DVP-PLC
M1002
MOV K200
MOV

K2

D200

MOV K250 D202
MOV K500 D203
MOV K250 D204
MOV

D205
D206

MOV K750 D208
MOV K500 D209
MOV K-250 D210
MOV K250 D211
K200 D212
M0

END

7. Example 3: Acceleration and deceleration in 1 section and the pulse output program with direction switch
Y7=OFF
TF1
SF2
TF2
X0=ON

SF1
Position

Zero point

SF1

TF2
SF2

TF1
Y7=O n

Explanation:
a) See example 2 for the settings for acceleration and deceleration. The acceleration/deceleration frequency is
stored in the latched area; therefore, you do not have to write it in in the program.
b) The figure above is the example of the motion. When X0 = On, it will start the motion back and forth; when X0
= Off, the motion will stop. Y7 is a direction switch.
c) The program:

2-118

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
M1002
RST

M0

RST

M1

SET

M0

ALT

M1

X0
X0

M0

M1
Y7
M1
SET
M1
M1148
RST
M0
X0
RST
END

8. Example 4: Program of zero return for 1 acceleration section and 1 deceleration section
The timing diagram of relevant flags:

Accelerating to
zero point

Decelerating to
zero point
Zero return stops

X0
M1144
M1148

Pulse output stops
M1149

Frequency and the positions:
Frequency (Hz)

Zero point
Position
Accelerating to
zero point

DVP-PLC Application Manual

Decelerating to
zero point

2-119

2 Functions of Devices in DVP-PLC
Settings of acceleration/deceleration time, frequency and number of pulses:
Started No. D
+ index value

Setting

+0

2

+2

250 (Hz)

+3

100 (ms)

+4

500 (Hz)

+5

10,000 (Hz)

+6, +7

10 (pulses)

+8

9,750 (Hz)

+9

50 (ms)

+10

-500 (Hz)

+11

250 (Hz)

+12, +13

30,000 (pulses)

The program: (Assume X7 is the switch for triggering zero return)
X7
SET
SET
X0
RST
X0
SET
RST
END

Program explanations:
a) When X7 is triggered, M1144 will enable an acceleration. Set M1149 (counting temporarily stops) and 10
pulses will be sent out before the deceleration switch X0 is triggered and the program will enter the
deceleration section.
b) When X0 is disabled (i.e. zero return is completed), set M1148 to disable this function.
Note: The example offered here is one of the applications. Please adjust the settings of the parameters according to
the features of and restrictions on your machines.

Function Group

PWD Pulse Width Detection Duty-Off/Duty-On

Number

M1144, D1144

Application:
Before the instruction DDRVI is used to drive the servo, the acceleration/deceleration operation is performed on the
target position and the target frequency. After the instruction DDRVI is enabled, the operation can not be performed
on the same target position and target frequency. The advantage is that the production can be enhanced.
2-120

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Device:
If M1144 is On, the function is enable. If M1144 is Off, the function is disabled.
D1144→Using the index valule of the data register
For example, k0 represents D0, k100 represents D100.
Usage: (Firmware version above 2.0)
1. Suppose the value in D1144 is k0. The value in (D0, D1) represents the number of targets, the value in (D2, D3)
represents the target frequency of Y0, the value in D1343 represents the acceleration time, the value in D1348
represents the deceleration time, and the value in D1340 represents the acceleration/deceleration frequency .
2. When M1144 is ON and the instruction DDRVI is not enabled, the operation is performed on the
acceleration/deceleration frequency and the number of targets. After DDRVI is enabled, the pulses are
generated.
3. If M1144 is On, the previous output value is executed whenever DDRVI is enabled. If users want to change the
target frequency or the number of targets, users have to reset M1144 to Off when DDRVI is disabled.
4. When this function is used, the default acceleration time and deceleration time are the values in D1343 and
D1348. Therefore, the acceleration sections and decelerations section can occupy 30 sections respectively.
5. This function can be used with the designated deceleration number function (D1232, D1233), and the
masking/marking function (M1156).
Timing chart:
1. The function is disabled:

Freq.

Start DDRVI

Time

Calculation time
2. The function is enabled:

Freq.

Start DDRVI

Time

Calculation time

DVP-PLC Application Manual

2-121

2 Functions of Devices in DVP-PLC
Function Group

PWD Pulse Width Detection Duty-Off/Duty-On

Number

M1154

Contents:
1. PWD pulse width detection function of M1154 is only available in EH2/SV/EH3/SV2 series V1.6 and later
versions.
2. M1154 = Off: Detecting the width time when duty-off. M1154 = On: Detecting the width time when duty-on.

Function Group

Pulse Output Pause, Mask, Mark

Number

M1156 ~ M1159, M1538 ~ M1541, D1026, D1027

Contents:
1. Actions of interruption type pulse output pause function (with deceleration):
Frequency
Enable I001

Disable I001
Set M1156 = ON

Reset M1156 = OFF

I001 interruption occurs.
Target frequency

I001 interruption does not occur.
Start/end frequency

Number of
output pulses

D1340
D1343: Acc eleration time

D1348: Dec eleration time
or D1233/1232: N umber of
deceleration puls es

Pause stop, M1158 = ON (Note #1)

D 1027/1026: N um ber of
s hielded pulses

Note: Actual line (
Dotted line (

) -> Action when I001 interruption does not occur.
) -> A ction when I001 interruption occur s in unmasked area.

Note #1: A fter M1538 = ON and the user reset M1156 = OFF, PLC will com plete the r emaining
number of output pulses automatically.

Applicable instructions: DRVI/DDRVI/PLSR/DPLSR
Usage restriction: Has to work with external interruptions, special M and special D.
Other explanations:
a) When this function is enabled, PLC will start to decelerate according to the set deceleration time. Even if the
user does not set up the number of deceleration pulses (i.e. special D = 0), or the set number of pulses is
less than the number planned for the deceleration time, PLC will still decelerate within the deceleration time.
On the contrary, if the number of deceleration pulses is more than the planned number for the deceleration
time, PLC will decelerate according to the number set in the special D.
b) Range for deceleration time: 10 ~ 10,000ms
c) There is mask interruption in CH0 high-speed output. When D1027/D1026 (32-bit) ≠ 0, the mask function
will be enabled, i.e. X0 external interruption will not be activated when the number of output pulses is within
the mask area.
2-122

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
High-speed output CH0 ~ CH3 v.s. pause function of external input points X0 ~ X3:
Parameter

Interruption
paused flag

External
input point

Deceleration
time
Special D

Deceleration
paulses
Special D

CH0 (Y0,Y1)

M1156

X0

D1348

D1232~D1233

CH1 (Y2,Y3)

M1157

X1

D1349

D1234~D1235

No

M1539

CH2 (Y4,Y5)

M1158

X2

D1350

D1236~D1237

No

M1540

CH3 (Y6,Y7)

M1159

X3

D1351

D1238~D1239

No

M1541

Interruption

External

Deceleration
time

Deceleration
paulses

Mask

paused flag

input point

interruption

Special D

Special D

function

CH0 (Y0,Y1)

M1156

X0

D1348

D1232~D1233

CH1 (Y2,Y3)

M1157

X1

D1349

D1234~D1235

CH2 (Y4,Y5)

M1158

X2

D1350

D1236~D1237

CH3 (Y6,Y7)

M1159

X3

D1351

D1238~D1239

Channel

Mask
interruption
function
D1026,
D1027

Pause status
flag
M1538

EH3/SV2
Parameter
Channel

D1026,
D1027
D1135~
D1136
D1154~
D1155
No

Pause status
flag

M1538

M1539

M1540
M1541

Application examples:
¾ When M0 turns from Off to On, Y0 will start to output pulses and wait for the external input interruption
X0 to take place. When interruption signals occur in the acceleration section or the highest speed
section during the output, Y0 will immediately decelerate and stop the output after 100ms, and M1538 =
On.
¾ When M1538 = On, the user can reset (RST) M1156, and PLC will start to output the remaining pulses.
When all the target pulses are completed, M1029 will be On.
¾ If the external interruption occurs in the planned deceleration area, the output will not decelerate or set
M1538 to On.
b) Example 1: Immediately decelerate and pause within deceleration time
¾ Application: When external interruptions occur, the high-speed output has to achieve deceleration and
pause within the designated deceleration time. It is generally applied in the searching mark function in
single-axis motion control.
¾ The program:

DVP-PLC Application Manual

2-123

2 Functions of Devices in DVP-PLC
EI
M1002
MOV

K100

D1343

MOV

K100

D1348

SET

M1156

M0

DMOV K50000

D1232

DMOV

D1026

K0

M0
DDRVI

K100000

K100000

Y0

Y1
FEND

I001

M1000

INCP

D100
IRET
END

c) Program explanation:
¾ When M0 turns from Off to On, Y0 will start to output pulses and wait for the external input interruption
X0 to take place. When interruption signals occur in the acceleration section or the highest speed
section during the output, Y0 will immediately decelerate and stop the output after 100ms, and M1538 =
On.
¾ When M1538 = On, the user can reset (RST) M1156, and PLC will start to output the remaining pulses.
When all the target pulses are completed, M1029 will be On.
¾ If the external interruption occurs in the planned deceleration area, the output will not decelerate or set
M1538 to On.
d) Example 2: Immediately decelerate and pause within the number of deceleration pulses
¾

Application: When external interruptions occur, the high-speed output has to achieve deceleration and
pause within the designated number of deceleration pulses. It is generally applied in the searching mark
function in single-axis motion control.

¾

2-124

The program:

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
EI
M1002
MOV

K100

D1343

MOV

K100

D1348

SET

M1156

M0

DMOV K50000

D1232

DMOV K40000

D1026

M0
DDRVI

K100000

K100000

Y0

Y1
FEND

I001

M1000
INCP

D100
IRET
END

M0
DDRVI

K100000

K100000

Y0

Y1
FEND

I001

M1000
INCP

D100
IRET
END

e) Program explanation:
¾

When M0 turns from Off to On, Y0 will start to output pulses. After the external input interruption X0
occurs during the output, Y0 will immediately decelerate and output 50,000 pulses before it stops and
set M1538 (pause status flag) to On.

¾

When M1538 = On, the user can reset (RST) M1156, and PLC will start to output the remaining pulses.
When all the target pulses are completed, M1029 will be On.

¾

If the external interruption occurs in the planned deceleration area, the output will not decelerate or set
M1538 to On.

2. Actions of program type pulse output pause function (with no deceleration):

DVP-PLC Application Manual

2-125

2 Functions of Devices in DVP-PLC
Frequency

M1308=ON

Target frequency
Pulse output completed
M1029 = On

M1308=OFF

Start/end frequency

Time

Acceleration
time

Number of pulses

Max. stop time:
1 scan cycle

Deceleration
time

Applicable instructions: DRVI/DDRVI/DRVA/DDRVA/PLSR/DPLSR
Applicable model/firmware version: EH2, EH3/SV2 v1.4, SV v1.5 (and their later versions)
During the pulse output, force On M1308 will pause the output, and force Off M1308 will start the output of
remaining pulses.
The max. stop time inaccuracy in this pause function is 1 scan cycle.
High-speed output CH0 ~ CH3 v.s. pause function of pause flags:
Flag
Channel

Pause flag

CH0

M1308

CH1

M1309

CH2

M1310

CH3

M1311

3. Special M and special D registers for SV V1.4 and later versions when conducting deceleration to pausing output
(for the ongoing high-speed pulse output encountering interruption signals), mask and mark.
Device No.

Function
st

M1308
M1309
M1310
M1311

2-126

Off -> On: 1 group of CH0 (Y0, Y1) high-speed pulse output immediately pauses.
On -> Off: Complete the remaining number of output pulses
Off -> On: 1st group of CH1 (Y2, Y3) high-speed pulse output immediately pauses.
On -> Off: Complete the remaining number of output pulses
Off -> On: 1st group of CH2 (Y4, Y5) high-speed pulse output immediately pauses.
On -> Off: Complete the remaining number of output pulses
Off -> On: 1st group of CH3 (Y6, Y7) high-speed pulse output immediately pauses.
On -> Off: Complete the remaining number of output pulses

M1156

Enable X0 interruption to trigger immediate decelerating and pausing CH0 high-speed output.
(When M1156 is enabled and M1538 = On, simply clear M1156 to finish sending out the
remaining output pulses.)

M1157

Enable X1 interruption to trigger immediate decelerating and pausing CH1 high-speed output

M1158

Enable X2 interruption to trigger immediate decelerating and pausing CH2 high-speed output

M1159

Enable X3 interruption to trigger immediate decelerating and pausing CH3 high-speed output

M1538

CH0 pause status

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Device No.

Function

M1539

CH1 pause status

M1540

CH2 pause status

M1541

CH3 pause status

D1026

When ≠ 0, enabling DRVI and PLSR instructions to work with X0 (mask)
interruption.

D1027
D1232
D1233
D1234
D1235
D1236
D1237
D1238
D1239

High word
Low word

Number of CH1 output pulses after mark

High word
Low word

Number of CH2 output pulses after mark

High word
Low word

Number of CH3 output pulses after mark

Single Step Execution

Number

M1170, M1171, D1170

High word
Low word

Number of CH0 output pulses after mark

Function Group

Low word

High word

Contents:
1. Special D and special M for single step execution for EH2/SV/EH3/SV2:
Device No.

Function

M1170

Start flag

M1171

Action flag

D1170

STEP No. of the currently executed instruction

2. The function:
a) Execution timing: The flag is valid only when PLC is in RUN status.
b) Action steps:
i) When M1170 is enabled, PLC enters the single step execution mode. PLC stays at a specific instruction,
stores the location of STEP in D1170 and executes the instsruction once.
ii) When M1171 is forced “On”, PLC executes the next instruction and stops. At the same time, PLC
auto-force “O ff” M1171 and stops at the next instruction. D1170 stores the present STEP value.
iii) When Y output is in single step execution mode, Y outputs immediately without having to wait until END
instruction is being executed.
3. Note:
a) Instruction that will be affected by scan time will be executed incorrectly due to the single step execution. For
example, when HKY instruction is executed, it takes 8 scan times to obtain a valid input value from a key.
Therefore, the single step execution will result in incorrect actions.

DVP-PLC Application Manual

2-127

2 Functions of Devices in DVP-PLC
b) High-speed pulse input/output and high-speed counter comparison instructions are executed by hardware;
therefore, they will not be affected by the single step execution.

Function Group

2-phase Pulse Output

Number

M1172 ~ M1174, D1172 ~ D1177

Contents:
1. Special D and special M for two-phase pulse output for SA/SX/SC:
Device No.

Function

M1172

Switch for two-phase pulse output (On = enabled)

M1173

On = Continuous output switch

M1174

“Number of pulses reached” flag

D1172

Output frequency (12Hz ~ 20kHz)

D1173

Output mode (K1 and K2)

D1174

The lower 16 bits of the 32 bits for the target number of pulses

D1175

The higher 16 bits of the 32 bits for the target number of pulses

D1176

The lower 16 bits of the 32 bits for the present number of pulses

D1177

The higher 16 bits of the 32 bits for the present number of pulses

2. The function:
Output frequency = 1/1 pulse cycle period (i.e. 1/T; as the figure below)
There are two output modes. K1 refers to “A-phase ahead of B-phase” and K2 refers to “B-phase ahead of
A-phase”. The number of pulses accumulates once whenever a phase gap occurs. For example, the number of
pulses in the figure below = 8, and when the number is reached, M1174 turns “On”. To clear the number, simply
turn “Off” M1172.
T

Y0(A)

Y1(B)

1

2

3

4

5

6

7

8

The output frequency, target number of pulses and selection of modes can be modified when M1172 = On and
M1174 = Off. Modification on output frequency and target number of pulses will not affect the present number of
pulses, but when the mode is modified, the present number of pulses will be cleared as “0”. The present number
of output pulses is updated in every scan time. When M1133 turns from “Off” to “on”, the number will be cleared
as “0”. When M1172 is cleared as “0” when PLC goes from STOP to RUN. When PLC goes from RUN to STOP,
the last number of pulses will be shown.
3. Note:

2-128

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
This function can only be used when PLC is in RUN status and can coexist with PLSY instruction in the program.
If PLSY instruction is executed prior to this function, the function cannot be used and vice versa.

Function Group

VR Volume

Number

M1178 ~ M1179, D1178 ~ D1179

Contents:
1. Special D and special M for built-in 2-point VR volume for EH2/SV/EH3/SV2 and SA/SC:
Device No.

Function

M1178

Enable VR0 volume

M1179

Enable VR1 volume

D1178

VR0 value

D1179

VR1 value

2. The function:
This function should be used when PLC is in RUN status. When M1178 = On, VR0 value will be converted into a
value of 0 ~ 255 and stored in D1178. When M1179 = On, VR1 value will be converted into a value of 0 ~ 255 and
stored in D1179.
3. See API 85 VRRD for more details.

Function Group

Interruption Instruction for Reading the Number of Pulses

Number

D1180 ~ D1181,D1198 ~ D1199

Contents:
1. SA/SX/SC can use external interruption to store the present value in the middle-high-speed counter into D1180 ~
D1181, D1198 ~ D1199
2. The function:
a) For SA/SX, X0 (pulse input point) has to work with X4 (external interruption point), C235/C251/C253 (high-speed
counter) and I401 (interruption No.). D1180 and D1181 are the registers to store the 32-bit values.
Condition: When the program enables I401 (X4 is the external interruption input), and C235, C251, and C253 are
used, the function is enabled.
b) For SA/SX, X1 (pulse input point) has to work with X5 (external interruption point), C236 and I501. D1198 and
D1199 are the registers to store the 32-bit values.
Condition: When the program enables I501 (X5 is the external interruption input), and C236 is used, the function
is enabled.
c) For SC, X10 (pulse input point) has to work with X4 (external interruption point), C243/C255 (high-speed counter)
and I401 (interruption No.). D1180 and D1181 are the registers to store the 32-bit values. X11 (pulse input point)
has to work with X5 (external interruption point), C245 and I501. D1198 and D1199 are the registers to store the
32-bit values.
Condition 1: When the program enables I401 (X4 is the external interruption input), and C235, C241 and C251
are used, the function is enabled. Once the high-speed counting value is acquired, the present value of
DVP-PLC Application Manual

2-129

2 Functions of Devices in DVP-PLC
high-speed counting will be cleared immediately. When the program enables I501 (X5 is the external interruption
input), and C236 is used, the function is enabled. Once the high-speed counting value is acquired, the present
value of high-speed counting will be cleared immediately.
Condition 2: When the program enables I401 (X4 is the external interruption input), and C243 and C255 are used,
the function is enabled, but the high-speed counting value will not be cleared. When the program enables I501
(X5 is the external interruption input), and C245 is used, the function is enabled, but the high-speed counting
value will not be cleared.

Function Group

MODEM Connection Function

Number

M1184 ~ M1188

Contents:
1.

The system connection
PC
DVP-EH/EH2 series MPU
Telecommunication
network
WPLSoft is executing.

2.

MODEM

MODEM
DVP-F232 interface

Special M for MODEM connection for EH2/EH3/SV2:
Device No.

Function

Note

M1184

Enable MODEM

On: The following actions are valid

M1185

Initialize MODEM

Off: Initialization is completed

M1186

Fail to initialize MODEM

Off: M1185 = On

M1187

MODEM initialization is completed

Off: M1185 = On

M1188

Shows if MODEM is connected

On: Connecting

Note: The special Ms are both applicable when PLC is in RUN or STOP status.
3.

How to conntect (Please follow the steps below):
a) Set “On” M1184 (Enable PLC MODEM connection).
b) Set “On” M1185 (Enable initialization of MODEM from PLC).
c) Check if the initialization of MODEM is successful from M1186, M1187.
d) Wait for the connection.

4.

Note:
a) When PLC is to be connected with MODEM, a RS-232 extension card is required. If there is no RS-232
extension card, all special M above will be invalid.
b) After enabling MODEM (M1184 = On), PLC has to initialize MODEM first (M1185 = On). If PLC fails to
initialize MODEM, the auto-answering function of the MODEM will not be enabled.
c) After MODEM is initialized, it will enter auto-answering mode automatically.
d) If the remote PC is disconnected, MODEM will enter stand-by mode automatically and if the user turns off
MODEM now, MODEM will have to be initialized again when it is turned on again.

2-130

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
e) The connection speed is set by PLC as 9,600bps fixed and modification on the speed is not allowed.
MODEM has to be able to support the speed of 9,600bps and versions above.
f) The initialization format from PLC to MODEM are ATZ and ATS0 = 1.
g) If PLC fails to initialize MODEM, use the super terminal in PC to initialize it by the format ATZ and ATS0 = 1.

Function Group

Latched Area

Number

D1200 ~ D1219

Contents:
1.

The latched area for EH2/SV/EH3/SV2 and SA/SX/SC is from the start address No. to the end address No.

2.

See the tables in Chapter 2.1 for more details.

Function Group

Set On/Off of Input Point X on MPU

Number

M1304

Contents:
1.

For SS/ES/EX, when M1304 = On, the X input points (X0 ~ X17) on MPU can be set On/Off by peripheral
devices, e.g. WPLSoft or DVP-HPP. However, the LED indicators will not respond to the setup.

2.

For SA/SX/SC, when M1304 = On, peripheral devices, e.g. WPLSoft or DVP-HPP, can set On/Off of X0 ~ X17
on the MPU, but the LED indicators will not respond to it.

3.

For EH2/SV/EH3/SV2, when M1304 = On, peripheral devices, e.g. WPLSoft or DVP-HPP, can set On/Off of X
input points on the MPU, but the LED indicators will not respond to it.

Function Group

High-speed Output Pulse Stop Mode

Number

M1310 ~ M1311, M1334 ~ M1335, D1166 ~ D1167, D1343 ~ D1353

Contents:
1. Special D and special M for high-speed pulse output stop mode: (SC_V1.4 and versions above are with an
additional mode 3)
Device No.

Function

M1334

Select stop mode for Y10 pulse

M1335

Select stop mode for Y11 pulse

M1310

Immediately stop Y10 pulse output

M1311

Immediately stop Y11 pulse output

D1166

X10 rising-edge/falling-edge counting mode switch

D1167

X11 rising-edge/falling-edge counting mode switch

D1343

Acceleration/deceleration time for Y10 pulse output

D1353

Acceleration/deceleration time for Y11 pulse output

2. How do Y10 pulse output stop modes work:
a) Using Y10 pulse output
Mode 1 – Planned deceleration
DVP-PLC Application Manual

2-131

2 Functions of Devices in DVP-PLC
Applicable to: DDRVI and DDRVA instructions
Criteria for executing planned deceleration: Shut down the criteria contact for pulse output instruction and
turn “Off” M1334.
The time from executing planned deceleration to the end of pulse output: The time set in D1343 (for
acceleration/deceleration)
The solid lines in the figure below are the originally planned routes and the dotted lines refer to the routes
after planned deceleration is executed.
Frequency
Instruction shut down and M1334 = Off
Target frequency

Start frequency
D1340
Time

Acceleration/deceleration time
D1343

Mode 2 – Output shutdown
Applicable to: DDRVI, DDRVA, PLSY instructions
Criteria for executing output shutdown: Shut down the criteria contact for pulse output instruction and turn
“On” M1334.(Because PLSY does not have acceleration/deceleration setting, M1334 does not need to
be set in PLSY)
The time from executing output shutdown to the end of pulse output: Max. 1 scan cycle.
The solid lines in the figure below are the originally planned routes and the dotted lines refer to the routes
after output shutdown is executed.
Frequency
Instruction shut down and M1334 = On
Target frequency

Start frequency
D1340
Time

Mode 3 – Immediate output shutdown
Applicable to: DDRVI, DDRVA, PLSY instructions
Criteria for executing immediate output shutdown: M1310 = On (set before executing the instruction) and
the criteria triggers set in X10 (D1166 = K0 refers to rising-edge; D1166 = K1 refers to falling-edge)
The time from executing immediate output shutdown to the end of pulse output: Max. 1 pulse time.
The solid lines in the figure below are the originally planned routes and the dotted lines refer to the
routes after X10 is triggered.

2-132

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Frequency
X10 triggered
Target frequency

Start frequency
D1340
Time

Max. Stop time = 1 pulse time

b) Using Y11 pulse output
Mode 1 – Planned deceleration
Applicable to: DDRVI and DDRVA instructions
Criteria for executing planned deceleration: Shut down the criteria contact for pulse output instruction and
turn “Off” M1335.
The time from executing planned deceleration to the end of pulse output: The time set in D1353 (for
acceleration/deceleration)
Mode 2 – Output shutdown
Applicable to: DDRVI, DDRVA, PLSY instructions
Criteria for executing output shutdown: Shut down the criteria contact for pulse output instruction and turn
“On” M1335. (Because PLSY does not have acceleration/deceleration setting, M1335 does not need to be
set in PLSY)
The time from executing output shutdown to the end of pulse output: Max. 1 scan cycle.
Mode 3 – Immediate output shutdown
Applicable to: DDRVI, DDRVA, PLSY instructions
Criteria for executing immediate output shutdown: M1311 = On (set before executing the instruction) and
the criteria triggers set in X11 (D1167 = K0 refers to rising-edge; D1167 = K1 refers to falling-edge)
The time from executing immediate output shutdown to the end of pulse output: Max. 1 pulse time.
3. Note:
a) The execution criteria M1334 and M1335 for mode 1 and 2 have to be set before executing pulse output
shutdown instruction. The execution criteria M1310, M1311 and trigger criteria D1166, D1167 for mode 3
have to be set before the pulse output instruction is executed.
b) In mode 3 (immediate output shutdown), Y10 can only be used with X10 and Y11 with X11.
c) When using X10 or X11 in mode 3, DO NOT use X10 or X11 as the input high-speed counter.

Function Group

Right-Side Special Extension Module ID

Number

D1320 ~ D1327

Contents:
1.

The ID of right-side special extension module, if any, connected to EH2/EH3/SV2 are stored in D1320 ~ D1327
in sequence.

2.

Special extension module ID for EH:

DVP-PLC Application Manual

2-133

2 Functions of Devices in DVP-PLC
Module ID
(hex)

Module Name

Module ID
(hex)

DVP04AD-H

H’0400

DVP01PU-H

H’0110

DVP04DA-H

H’0401

DVP01HC-H

H’0120

DVP04PT-H

H’0402

DVP02HC-H

H’0220

DVP04TC-H

H’0403

DVP01DT-H

H’0130

DVP06XA-H

H’0604

DVP02DT-H

H’0230

Module Name

3.

4.

Special extension module ID for EH2 (EH3 can be connected to the special extension module of EH2):
Module Name

Module ID
(hex)

Module Name

Module ID
(hex)

DVP04AD-H2

H’6400

DVP01HC-H2

H’6120

DVP04DA-H2

H’6401

DVP02HC-H2

H’6220

DVP04PT-H2

H’6402

DVPDT02-H2

H’0230

DVP04TC-H2

H’6403

DVPCP02-H2

H’0240

DVP06XA-H2

H’6604

DVPPF02-H2

H’0250

DVP01PU-H2

H’6110

Special extension module ID for EH3:
Module Name

Module ID
(hex)

DVP04AD-H3

H’6407

DVP06XA-H3

H’6608

DVP04DA-H3

H’6409

Function Group

Left-Side High-Speed Special Extension Module ID

Number

D1386 ~ D1393

Contents:
1.

The ID of left-side special extension module, if any, connected to SV/SV2/EH2-L are stored in D1386 ~ D1393
in sequence.

2.

Left-side special extension module ID for SV/SV2/EH2-L:

2-134

Module Name

Module ID
(hex)

Module Name

Module ID
(hex)

DVP04AD-SL

H’4400

DVP01HC-SL

H’4120

DVP04DA-SL

H’4401

DVP02HC-SL

H’4220

DVP04PT-SL

H’4402

DVPDNET-SL

H’4131

DVP04TC-SL

H’4403

DVPEN01-SL

H'4050

DVP06XA-SL

H’6404

DVPMDM-SL

H’4040

DVP01PU-SL

H’4110

DVPCOPM-SL

H’4133

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Function Group

PLC LINK

Number

M1350 ~ M1354, M1360 ~ M1519, D1399, D1355 ~ D1370, D1415 ~ D1465, D1480 ~ D1991

Contents:
1.

Special D and special M for ID1 ~ ID8 of the 16 stations in PLC LINK (M1353 = Off) for
SA/SX/SC/EH2/SV/EH3/SV2:

MASTER PLC
SLAVE ID 1 SLAVE ID 2 SLAVE ID 3 SLAVE ID 4 SLAVE ID 5 SLAVE ID 6 SLAVE ID 7 SLAVE ID 8
Read Write Read Write Read Write Read Write Read Write Read Write Read Write Read Write
out
in
out
in
out
in
out
in
out
in
out
in
out
in
out
in
M1353 = Off: Disable 32 stations in the Link and the function of reading/writing more than 16 data (RST M1353); the
No. of special D for storing the 16 read/written data.
D1480 D1496 D1512 D1528 D1544 D1560 D1576 D1592 D1608 D1624 D1640 D1656 D1672 D1688 D1704 D1720
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
D1495 D1511 D1527 D1543 D1559 D1575 D1591 D1607 D1623 D1639 D1655 D1671 D1687 D1703 D1719 D1735
Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number
of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data

D1434 D1450 D1435 D1451 D1436 D1452 D1437 D1453 D1438 D1454 D1439 D1455 D1440 D1456 D1441 D1457

Start Communication Address
D1355 D1415 D1356 D1416 D1357 D1417 D1358 D1418 D1359 D1419 D1360 D1420 D1361 D1421 D1362 D1422

M1360

M1361

M1362

LINK in SLAVE PLC?
M1363
M1364

M1365

M1366

M1367

M1381

M1382

M1383

M1397

M1398

M1399

Action flag for SLAVE PLC from MASTER PLC
M1376

M1377

M1378

M1379

M1380

“Read/write error” flag
M1392

M1393

M1394

M1395

M1396

“Reading completed” flag (turns “Off” whenever read/write a station is completed)
M1408

M1409

M1410

M1411

M1412

M1413

M1414

M1415

“Writing completed” flag (turns “Off” whenever read/write a station is completed)
M1424

M1425

M1426

M1427

M1428

M1429

M1430

M1431

↓

↓

↓

↓

↓

↓

↓

↓

SLAVE ID 1 SLAVE ID 2 SLAVE ID 3 SLAVE ID 4 SLAVE ID 5 SLAVE ID 6 SLAVE ID 7 SLAVE ID 8
Read Write Read Write Read Write Read Write Read Write Read Write Read Write Read Write
out
in
out
in
out
in
out
in
out
in
out
in
out
in
out
in
D100 D200 D100 D200 D100 D200 D100 D200 D100 D200 D100 D200 D100 D200 D100 D200
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
D115 D215 D115 D215 D115 D215 D115 D215 D115 D215 D115 D215 D115 D215 D115 D215
Default start communication address D1355 ~ D1362 to be read = H1064 (D100)
Default start communication address D1415 ~ D1422 to be written = H10C8 (D200)

DVP-PLC Application Manual

2-135

2 Functions of Devices in DVP-PLC
2.

Special D and special M for ID9 ~ ID16 of the 16 stations in PLC LINK (M1353 = Off) for
SA/SX/SC/EH2/SV/EH3/SV2:

MASTER PLC
SLAVE ID 9 SLAVE ID 10 SLAVE ID 11 SLAVE ID 12 SLAVE ID 13 SLAVE ID 14 SLAVE ID 15 SLAVE ID 16
Read Write Read Write Read Write Read Write Read Write Read Write Read Write Read Write
out
in
out
in
out
in
out
in
out
in
out
in
out
in
out
in
M1353 = Off: Disable 32 stations in the Link and the function of reading/writing more than 16 data (RST M1353); the
No. of special D for storing the 16 read/written data.
D1736 D1752 D1768 D1784 D1800 D1816 D1832 D1848 D1864 D1880 D1896 D1912 D1928 D1944 D1960 D1976
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
D1751 D1767 D1783 D1799 D1815 D1831 D1847 D1863 D1879 D1895 D1911 D1927 D1943 D1959 D1975 D1991
Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number
of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data

D144 D145
D1443 D1459 D1444 D1460 D1445 D1461 D1446 D1462 D1447 D1463 D1448 D1464 D1449 D1465
2
8
Start Communication Address
D1363 D1423 D1364 D1424 D1365 D1425 D1366 D1426 D1367 D1427 D1368 D1428 D1369 D1429 D1370 D1430
M1368

M1369

M1370

LINK in SLAVE PLC?
M1371
M1372

M1373

M1374

M1375

M1389

M1390

M1391

M1405

M1406

M1407

Action flag for SLAVE PLC from MASTER PLC
M1384

M1385

M1386

M1387

M1388

“Read/write error” flag
M1400

M1401

M1402

M1403

M1404

“Reading completed” flag (turns “Off” whenever read/write a station is completed)
M1416

M1417

M1418

M1419

M1420

M1421

M1422

M1423

“Writing completed” flag (turns “Off” whenever read/write a station is completed)
M1432

M1433

M1434

M1435

M1436

M1437

M1438

M1439

↓

↓

↓

↓

↓

↓

↓

↓

SLAVE ID 9
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 10
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 11
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 12
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 13
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 14
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 15
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 16
Read Write
out
in
D100 D200
│
│
D115 D215

Default start communication address D1363 ~ D1370 to be read = H1064 (D100)
Default start communication address D1423 ~ D1430 to be written = H10C8 (D200)

2-136

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
3.

Special D and special M for ID1 ~ ID8 of the 32 stations in PLC LINK (M1353 = On) for EH2/SV/EH3/SV2:

MASTER PLC
SLAVE ID 1 SLAVE ID 2 SLAVE ID 3 SLAVE ID 4 SLAVE ID 5 SLAVE ID 6 SLAVE ID 7 SLAVE ID 8
Read Write Read Write Read Write Read Write Read Write Read Write Read Write Read Write
out
in
out
in
out
in
out
in
out
in
out
in
out
in
out
in
M1353 = On: Enable 32 stations in the Link and the function of reading/writing more than 16 data (SET M1353); the
No. of D registers for storing the read/written data.
D1480 D1496 D1481 D1497 D1482 D1498 D1483 D1499 D1484 D1500 D1485 D1501 D1486 D1502 D1487 D1503
Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number
of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data

D1434 D1450 D1435 D1451 D1436 D1452 D1437 D1453 D1438 D1454 D1439 D1455 D1440 D1456 D1441 D1457

Start Communication Address
D1355 D1415 D1356 D1416 D1357 D1417 D1358 D1418 D1359 D1419 D1360 D1420 D1361 D1421 D1362 D1422

M1360

M1361

M1362

LINK in SLAVE PLC?
M1363
M1364

M1365

M1366

M1367

M1381

M1382

M1383

M1397

M1398

M1399

Action flag for SLAVE PLC from MASTER PLC
M1376

M1377

M1378

M1379

M1380

“Read/write error” flag
M1392

M1393

M1394

M1395

M1396

“Reading completed” flag (turns “Off” whenever read/write a station is completed)
M1408

M1409

M1410

M1411

M1412

M1413

M1414

M1415

“Writing completed” flag (turns “Off” whenever read/write a station is completed)
M1424

M1425

M1426

M1427

M1428

M1429

M1430

M1431

SLAVE ID 1 SLAVE ID 2 SLAVE ID 3 SLAVE ID 4 SLAVE ID 5 SLAVE ID 6 SLAVE ID 7 SLAVE ID 8
Read Write Read Write Read Write Read Write Read Write Read Write Read Write Read Write
out
in
out
in
out
in
out
in
out
in
out
in
out
in
out
in
D100 D200 D100 D200 D100 D200 D100 D200 D100 D200 D100 D200 D100 D200 D100 D200
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
│
D115 D215 D115 D215 D115 D215 D115 D215 D115 D215 D115 D215 D115 D215 D115 D215
Default start communication address D1355 ~ D1362 to be read = H1064 (D100)
Default start communication address D1415 ~ D1422 to be written = H10C8 (D200)

DVP-PLC Application Manual

2-137

2 Functions of Devices in DVP-PLC
4.

Special D and special M for ID9 ~ ID16 of the 32 stations in PLC LINK (M1353 = On) for EH2/SV/EH3/SV2:

MASTER PLC
SLAVE ID 9 SLAVE ID 10 SLAVE ID 11 SLAVE ID 12 SLAVE ID 13 SLAVE ID 14 SLAVE ID 15 SLAVE ID 16
Read Write Read Write Read Write Read Write Read Write Read Write Read Write Read Write
out
in
out
in
out
in
out
in
out
in
Out
in
out
in
out
in
M1353 = On: Enable 32 stations in the Link and the function of reading/writing more than 16 data (SET M1353); the
No. of D registers for storing the read/written data.
D1488 D1504 D1489 D1505 D1490 D1506 D1491 D1507 D1492 D1508 D1493 D1509 D1494 D1510 D1495 D1511
Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number
of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data

D1442 D1458 D1443 D1459 D1444 D1460 D1445 D1461 D1446 D1462 D1447 D1463 D1448 D1464 D1449 D1465

Start Communication Address
D1363 D1423 D1364 D1424 D1365 D1425 D1366 D1426 D1367 D1427 D1368 D1428 D1369 D1429 D1370 D1430

M1368

M1369

M1370

LINK in SLAVE PLC?
M1371
M1372

M1373

M1374

M1375

M1389

M1390

M1391

M1405

M1406

M1407

Action flag for SLAVE PLC from MASTER PLC
M1384

M1385

M1386

M1387

M1388

“Read/write error” flag
M1400

M1401

M1402

M1403

M1404

“Reading completed” flag (turns “Off” whenever read/write a station is completed)
M1416

M1417

M1418

M1419

M1420

M1421

M1422

M1423

“Writing completed” flag (turns “Off” whenever read/write a station is completed)
M1432

M1433

M1434

M1435

M1436

M1437

M1438

M1439

SLAVE ID 9
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 10
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 11
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 12
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 13
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 14
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 15
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 16
Read Write
out
in
D100 D200
│
│
D115 D215

Default start communication address D1363 ~ D1370 to be read = H1064 (D100)
Default start communication address D1423 ~ D1430 to be written = H10C8 (D200)

2-138

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
5.

Special D and special M for ID17 ~ ID24 of the 32 stations in PLC LINK (M1353 = On) for EH2/SV/EH3/SV2:

MASTER PLC
SLAVE ID 17 SLAVE ID 18 SLAVE ID 19 SLAVE ID 20 SLAVE ID 21 SLAVE ID 22 SLAVE ID 23 SLAVE ID 24
Read Write Read Write Read Write Read Write Read Write Read Write Read Write Read Write
out
in
out
in
out
in
out
in
out
in
out
in
out
in
out
in
M1353 = On: Enable 32 stations in the Link and the function of reading/writing more than 16 data (SET M1353); the
No. of D registers for storing the read/written data.
D1576 D1592 D1577 D1593 D1578 D1594 D1579 D1595 D1580 D1596 D1581 D1597 D1582 D1598 D1583 D1599
Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number
of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data

D1544 D1560 D1545 D1561 D1546 D1562 D1547 D1563 D1548 D1564 D1549 D1565 D1550 D1566 D1551 D1567

start Communication Address
D1512 D1528 D1513 D1529 D1514 D1530 D1515 D1531 D1516 D1532 D1517 D1533 D1518 D1534 D1519 D1535

M1440

M1441

M1442

LINK in SLAVE PLC?
M1443
M1444

M1445

M1446

M1447

M1461

M1462

M1463

M1477

M1478

M1479

Action flag for SLAVE PLC from MASTER PLC
M1456

M1457

M1458

M1459

M1460

“Read/write error” flag
M1472

M1473

M1474

M1475

M1476

“Reading completed” flag (turns “Off” whenever read/write a station is completed)
M1488

M1489

M1490

M1491

M1492

M1493

M1494

M1495

“Writing completed” flag (turns “Off” whenever read/write a station is completed)
M1504

M1505

M1506

M1507

M1508

M1509

M1510

M1511

SLAVE ID 17
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 18
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 29
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 20
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 21
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 22
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 23
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 24
Read Write
out
in
D100 D200
│
│
D115 D215

Default start communication address D1512 ~ D1519 to be read = H1064 (D100)
Default start communication address D1528 ~ D1535 to be written = H10C8 (D200)

DVP-PLC Application Manual

2-139

2 Functions of Devices in DVP-PLC
6.

Special D and special M for ID25 ~ ID32 of the 32 stations in PLC LINK (M1353 = On) for EH2/SV/EH3/SV2:

MASTER PLC
SLAVE ID 25 SLAVE ID 26 SLAVE ID 27 SLAVE ID 28 SLAVE ID 29 SLAVE ID 30 SLAVE ID 31 SLAVE ID 32
Read Write Read Write Read Write Read Write Read Write Read Write Read Write Read Write
out
in
out
in
out
in
out
in
out
in
out
in
out
in
out
in
M1353 = On: Enable 32 stations in the Link and the function of reading/writing more than 16 data (SET M1353); the
No. of D registers for storing the read/written data.
D1584 D1600 D1585 D1601 D1586 D1602 D1587 D1603 D1588 D1604 D1589 D1605 D1590 D1606 D1591 D1607
Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number Number
of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data of data

D1552 D1568 D1553 D1569 D1554 D1570 D1555 D1571 D1556 D1572 D1557 D1573 D1558 D1574 D1559 D1575

Start Communication Address
D1520 D1536 D1521 D1537 D1522 D1538 D1523 D1539 D1524 D1540 D1525 D1541 D1526 D1542 D1527 D1543

M1448

M1449

M1450

LINK in SLAVE PLC?
M1451
M1452

M1453

M1454

M1455

M1469

M1470

M1471

M1485

M1486

M1487

Action flag for SLAVE PLC from MASTER PLC
M1464

M1465

M1466

M1467

M1468

“Read/write” error flag
M1480

M1481

M1482

M1483

M1484

“Reading completed” flag (turns “Off” whenever read/write a station is completed)
M1496

M1497

M1498

M1499

M1500

M1501

M1502

M1503

“Writing completed” flag (turns “Off” whenever read/write a station is completed)
M1512

M1513

M1514

M1515

M1516

M1517

M1518

M1519

SLAVE ID 25
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 26
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 27
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 28
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 29
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 30
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 31
Read Write
out
in
D100 D200
│
│
D115 D215

SLAVE ID 32
Read Write
out
in
D100 D200
│
│
D115 D215

Default start communication address D1520 ~ D1527 to be read = H1064 (D100)
Default start communication address D1536 ~ D1543 to be written = H10C8 (D200)

2-140

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
7.

Note:
a) PLC LINK is based on Modbus communication protocol.
b) EH2/SV/EH3/SV2 supports 32 stations in the LINK and reading/writing of more than 16 data (SET1353)
(M1353 = On). SA/SX/SC supports 16 devices in the LINK and reading/writing of 16 data.
c) EH2/SV/EH3/SV2: When a MASTER PLC and a Slave PLC is connected, they are able to read/write
maximum 100 WORD data (M1353 = On). SA/SX/SC: Does not support M1353. When a Master PLC and a
Slave PLC is connected, they are able to read/write maximum 16 WORD data.
d) When the Master PLC is connected through COM2 (RS-485), baud rates and communication formats of all
Slave PLCs must be the same (set in D1120). When SA/SX/SC/EH2/SV/EH3/SV2 serves as Master, it
supports ASCII and RTU format.
e) When the Slave PLC is connected through COM2 (RS-232/RS-485/RS-422), baud rates and
communication formats of all connected Slave PLCs must be the same as those in the Master PLC (set in
D1120). When SA/SX/SC/EH2/SV/EH3/SV2 serves as Slave, it supports ASCII and RTU format.
f)

When the Slave PLC is connected through COM1 (RS-232), baud rates and communication formats of all
connected Slave PLCs must be the same as those in the Master PLC (set in D1036). When
SA/SX/SC/EH2/SV/EH3/SV2 serves as Slave, it supports ASCII and RTU format.

g) When the Slave PLC is connected through COM3 (RS-232/RS-485), baud rates and communication
formats of all connected Slave PLCs must be the same as those in the Master PLC (set in D1109). When
SA/SX/SC/EH/EH2/SV serves as Slave, it only supports ASCII format (Max. baud rate = 38,400bps).
h) The start station No. (K1 ~ K214) of Slave ID1 is assigned by D1399 of Master PLC. Station No. of every
Slave and Master PLC can not be the same (set in D1121).
i)

For one-to-one LINK: Connected through RS-232, RS-485, RS-422. PLC COM1, COM2, COM3 support
many communication formats.

j)

For one-to-many LINK: Connected through RS-485. PLC COM1, COM2, COM3 support many
communication formats.

8.

How to operate PLC LINK:
a) Set up the baud rates and communication formats of Master PLC and all connected Slave PLCs and make
them the same. COM1_RS-232: D1136; COM2_RS-232/RS-485/RS-422: D1120; COM3_RS-232/RS-485:
D1109.
b) Set up the station No. of Master PLC (in D1121) and assign the start station No. of Slave PLC from D1399
of Master PLC. Next, set up the station No. of Slave PLC. Station No. of Master and Slave cannot be the
same.
c) Set up the number of connected Slave stations and the number of data to be read in/written to Slave
stations. For EH2/SV/EH3/SV2 (M1353 = On): Enable the function of the 32 conncected Slaves and
reading/writing of more than 16 data (Max. 100 data). Next, set up the No. of D registers for storing the read
data (D1480 ~ D1495, D1576 ~ D1591) and written data (D1496 ~ D1511, D1592 ~ D1607) (See the
explanations above on special D). SA/SX/SC only supports reading/writing of 16 data.
d) Set up the length of data to be read from/written into the Slave. (If the user does not set up set them up, PLC
will follow the initial setting or the setting set in the previous operation.) (See the explanations above on
special D.)

DVP-PLC Application Manual

2-141

2 Functions of Devices in DVP-PLC
e) Set up the start communication address of the Slave to be read/written. (See the explanations above on
special D). The default start communication address of Slave to be read: H1064 = D100. The default start
communication address of Slave to be written: H10C8 = D200.
f)

Operation procedure:
i) Enable the function of more than 32 stations connected to PLC LINK and reading/writing of 16 data (Max.
100 data) (M1353).
ii) Enable reading/writing of PLC LINK in the same polling (M1354).
iii) Set up PLC LINK as auto mode (M1351), or manual mode (M1352) and the times of polling (D1431).
iv) When M1355 = On, M1360 ~ M1375 (M1440 ~ M1455) will be the flags for the PLC designated to be
connected to. When M1355 = Off, there will be detection on the slaves connected, and M1360 ~ M1375
(M1440 ~ M1455) will become the flags for the existence of connected PLC.
v) Enable PLC LINK (M1350).

9.

How does Master PLC work:
a) To detect station No. of Slave: Set up the LINK to be automatic mode (M1351 = On) or manual mode
(M1352 = On) (Note: M1351 and M1352 cannot be “On” at the same time) When M1350 = On, Master PLC
starts to detect the total number of Slave stations connected to the LINK and records the number in D1433.
The detection time may differ upon the number of Slave stations and the setting of communication timeout
in D1129.
b) When M1360 ~ M1375, M1440 ~ M1455 = On, Slave ID1 ~ ID32 exist.
c) If the detected number Slave stations is 0, M1350 will be “Off” and the LINK will be stopped.
d) M1353 and M1354 should be set before PLC LINK is enabled. When PLC LINK is executed, the two special
M will not afftec the action of PLC LINK.
e) When M1355 = On, M1360 ~ M1375 (M1440 ~ M1455) will be the flags for the PLC designated to be
connected to. Therefore, no matter how many PLCs are actually connected, the PLC LINK function will
continue to send read/write instruction in cycle according to the designated flags.
f)

When 1353 = On, D1480 ~ D1607 (read/write buffer of SLAVE ID1 ~ 4) will be used for storing the No. of
registers D for Slave ID1 ~ ID32, The No. of register D shall not be “> 9,900” or “< 0” ; otherwise, PLC will
auto-set it as 9,900. The data length shall not be “ > 100” or “<0”; otherwise, PLC will auto-set it as 100.

g) When M1354 = On, set up Modbus Function H17 (synchronous read/write) for PLC LINK communication. If
the number of written data is set to be “0”, the communication of PLC LINK will be automatically converted
into Modbus Function H03 (read multiple words). Similarly, if the number of read data is set to be “0”, the
communication of PLC LINK will be converted into Modbus Function H06 (write 1 word) or Modbus Function
H10 (write multiple words).
h) If the number of read/written data > 16, the time for timeout (D1129) shall be > 500ms in case
communication timeout may occur.
i)

After M1350 = On, Master PLC detects the ID of Slave E PLC only right after the LINK is enabled and will
not detect the ID again afterward.

j)

After the detection on Slave PLCs is completed, Master PLC starts to read and write data from/into every
Slave PLC. Please be noted that, Master PLC only reads/writes data from/into the detected Slave PLC.

2-142

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Master PLC will not read/write from/into the new Slave PLC to the LINK, unless it re-detects the ID of Slave
PLCs.
k) Master PLC conducts reading before writing. The ranges of Slave PLCs to be read/written will follow the
setting.
l)

Master PLC will move to the reading/writing of the next Slave PLC after finishing reading/writing the current
Slave PLC.

10.

Auto mode and maual mode:
a) Auto mode (M1351 = On): Master PLC automatically reads/writes from/to Slave PLC and stops when
M1350/M1351 = Off to terminate PLC LINK.
b) Manual mode (M1352 = On): When M1352 = On, you also have to set up the times of polling in D1431. One
time of polling refers to the completion of reading and writing all Slaves. After the PLC LINK is enabled,
D1432 will start to count how many LINKs have been done. When D1431 = D1432, PLC LINK stops and
M1352 is reset. To re-enable PLC LINK in the manual mode, simply turn “On” M1352 and D1431 will starts
to count the times of LINK again.
c) Note:
i) Automatic mode (M1351) and manual mode (M1352) cannot be “On” at the same time; otherwise PLC LINK
will stop and M1350 will be reset.
ii) For EH2/SV/EH3/SV2: M1350 has to be reset before switching between automatic mode and manual mode.
For SA/SX/SC: No such restriction.
iii) When M1355 = On, M1360 ~ M1375 (M1440 ~ M1455) will be the flags for the PLC designated to be
connected to. Therefore, no matter how many PLCs are actually connected, the PLC LINK function will
continue to send read/write instruction in cycle according to the designated flags.
iv) The communication timeout is adjustable (D1129, range: 200 ≤ D1129 ≤ 3,000). If D1129 falls out the range,
PLC will determine the time by 200 or 3,000. The timeout setting of PLC LINK is only valid if it is set before
the LINK is enabled. If the number of read/written data >16, the communication timeout shall be > 500ms in
case a communication timeout may occur.
v) PLC LINK is only workable when the baud rate is > 1,200bps. If the baud rate is < 9,600, the communication
timeout setting shall be > 1 second.
vi) The communication is unworkable when the number of read/written data = 0.
vii) PLC LINK does not support the reading/writing from/to 32-bit counters (C200 ~ C255).
viii) The maximum set value for D1399 is 230. If the set value is bigger than 230, PLC will automatically correct it
as 230. The minimum set value for D1300 is 1. If the set value is smaller than 1, PLC will automatically
correct it as 1.
ix) Setting up of D1399 has to be done before PLC LINK is enabled. After PLC LINK is enabled, setting up
D1399 will not result in any changes.
x) Advantages (when using a multi-layer network): Assume you are using a network with 3 layers and the first
and second layer and the second and third layer are using PLC LINK for communication, the IDs in the
second and third layer will definitely overlap due to the old version of PLC LINK detects only Slave ID#1 ~ 16.
When the IDs of Slave and Master overlap, PLC LINK will ignore the PLC of overlapping ID, resulting in the

DVP-PLC Application Manual

2-143

2 Functions of Devices in DVP-PLC
situation that the third layer can have only 15 PLCs. Therefore, D1399 allows more PLCs connected in a
multi-layer network.
11.

Operation Procedure of PLC LINK
Set up the Slave ID# to be read
Set up the number of data in Slave to be read
Set up the Slave ID# to be written
Set up the number of data in Slave to be written
(If there is no set value, use the previous set value or the default
value.)

Enable 32 slaves
linkage and up to
100 data for exchange

Enable

1. Enable 32 slaves linkage and up to
100 data for exchange (set M1353).
2. Set up the register D for storing the
read data.
3. Set up the register D for storing the
written data.

Enable

Disable

Disable 32 slaves linkage and up to
100 data for exchange.
(Reset M1353)

Communicating
by Modbus 0X17

Disable

Reset M1354

Set M1354
Enable auto mode

Enable auto/maual
mode of EASY PLC
LINK

Set M1351

Enable manual mode

Set M1352
Set times of communication
(D1431)
Set M1350
Start to execute EASY PLC LINK

2-144

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
a) Example 1: Enabling 32 slave units linkage and up to 100 data for exchange in PLC LINK by M1353
M1002
SET

M1353

MOV

K17

D1121

MOV

H86

D1120

SET

M1120

MOV

K2000

D1480

MOV

K3000

D1496

MOV

K300

D1129

MOV

K48

D1434

MOV

K48

D1450

X1
M1351
M1350
END

M1353 has to be set On before PLC LINK is enabled. When PLC LINK is executed, On/Off of M1353 will
not affect the execution.
Registers designated in D1480 ~ D1495, D1576~D1591 (starting register for data read from Slave ID#1 ~
16) and D1496 ~ D1511, D1592 ~ D1607 (starting register for data written into Slave ID#1 ~ 16) can only
be register D, and every special D will correspond to one Slave ID#, e.g. D1480 corresponds to ID1,
D1481 to ID2, and so on.
D1480 ~ D1495, D1576 ~ D1591, D1496 ~ D1511 and D1592 ~ D1607 have to be set before PLC LINK is
enabled. In the execution of PLC LINK, you can modify the contents in these special Ds, but the modified
results will take effect in the next PLC LINK polling.
If the ID# designated by D1480 ~ D1495, D1576 ~ D1591, D1496 ~ D1511 and D1592 ~ D1607 is smaller
than 0 or bigger than 9,900, PLC will automatically correct the ID# into 9,900.
If M1353 is not enabled during the execution of PLC LINK, the range for D1434 ~ D1449, D1544 ~ D1559
(number of data read from Slave ID#) and D1450 ~ D1465, D1560 ~ D1575 (numbere of data written into
Slave ID#) will be 0 ~ 16. If the setting in the special D exceeds the range, PLC will correct it to 16. When
M1353 is enabled, the range will be 0 ~ 100. If the setting in the special D exceeds the range, PLC will
correct it to 100.
You can modify the settings in D1434 ~ D1449, D1544 ~ D1559, D1450 ~ D1465 and D1560 ~ D1575
during the execution of PLC LINK, but the modified results will take effect in the next PLC LINK polling.
b) Example 2: PLC LINK with M1353 and I170
DVP-PLC Application Manual

2-145

2 Functions of Devices in DVP-PLC
M1002
SET

M1353

MOV

K17

D1121

MOV

H86

D1120

SET

M1120

MOV

K2000

D1480

MOV

K3000

D1496

MOV

K300

D1129

MOV

K48

D1434

MOV

K48

D1450

X1
M1350
M1351
FEND
I170

IRET
END

With I170, the processing of data in PLC LINK will not be done at END, but at the enabling of I170
immediately after the receiving of data is completed
If the reaction speed of the RS-485 IC direction control signal pin of the Slave is slow, it is suggested that
you do not enable I170.
You can set up D1399 (starting Slave ID designated by PLC LINK), and the ID# of the next 15 Slaves
have to be in sequence. For example, when D1399 is set as K20, the Master PLC will detect Slave ID# 20
~ 35.
c) Example 3: Connection of 1 Master and 2 Slaves by RS-485 and exchange of 16 data between Master and
Slaves through PLC LINK (M1353 = Off, linkage of 16 stations, 16 data read/write mode)
Write the ladder diagram program into Master PLC (ID#17)

2-146

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
M1002
MOV

K17

D1121

Master ID#

MOV

H86

D1120

COM2 communication protocol

SET

M1120

MOV

K16

D1434

Number of data read from Slave ID#1

MOV

K16

D1450

Number of data written into Slave ID#1

MOV

K16

D1435

Number of data read from Slave ID#2

MOV

K16

D1451

Number of data written into Slave ID#2

Retain communication protocol

X1
M1351

Auto mode

M1350

Enable EASY PLC LINK

END

When X1 = On, the data exchange between Master and the two Slaves will be automatically done in PLC
LINK, i.e. the data in D100 ~ D115 in the two Slaves will be read into D1480 ~ D1495 and D1512 ~ D1527
of the Master, and the data in D1496 ~ D1511 and D1528 ~ D1543 will be written into D200 ~ D215 of the
two Slaves.
Slave PLC*2

Master PLC *1
Read
D1480 ~ D1495

D100 ~ D115 of Slave ID#1
Write

D1496 ~ D1511

D200 ~ D215 of Slave ID#1

Read

D1512 ~ D1527

D100 ~ D115 of Slave ID#2

Write

D1528 ~ D1543

D200 ~ D215 of Slave ID#2

Assume the data in D for data exchange between Master and Slave before PLC LINK is enabled (M1350
= Off) are as the follow:
Master PLC

Preset value

Slave PLC

Preset value

D1480 ~ D1495

K0

D100 ~ D115 of Slave ID#1

K5,000

D1496 ~ D1511

K1,000

D200 ~ D215 of Slave ID#1

K0

D1512 ~ D1527

K0

D100 ~ D115 of Slave ID#2

K6,000

D1528 ~ D1543

K2,000

D200 ~ D215 of Slave ID#2

K0

DVP-PLC Application Manual

2-147

2 Functions of Devices in DVP-PLC
After PLC LINK is enabled (M1350 = On), the data in D for data exchange will become:
Master PLC

Preset value

Slave PLC

Preset value

D1480 ~ D1495

K5,000

D100 ~ D115 of Slave ID#1

K5,000

D1496 ~ D1511

K1,000

D200 ~ D215 of Slave ID#1

K1,000

D1512 ~ D1527

K6,000

D100 ~ D115 of Slave ID#2

K6,000

D1528 ~ D1543

K2,000

D200 ~ D215 of Slave ID#2

K2,000

The Master PLC has to be SA/SX/SC/EH2/SV/EH3/SV2 series MPU, and the Slave PLC can be any MPU
of DVP series.
There can be maximum 16 Slave PLCs in PLC LINK. See the special Ds in the Master PLC
corresponding to D100 ~ D115 and D200 ~ D215 in every Slave PLC in the tables of special M and
special D.
d) Example 4: Connection between Delta PLC and Delta VFD-M AC motor drive through PLC LINK for STOP,
forward/reverser revolution and writing/reading of frequency.
Write the ladder diagram program into Master PLC (ID#17)
M1002
MOV

K17

D1121

Master ID#

MOV

H86

D1120

COM2 communication protocol

SET

M1120

MOV

K6

D1434

Number of data read

MOV

K2

D1450

Number of data written

MOV

H2100

D1355

Starting reference for Master to read from Slave

MOV

H2000

D1415

Starting reference for Master to write in Slave

Retain communication protocol

X1
M1351

Auto mode

M1350

Enable PLC LINK

END

D1480 ~ D1485 correspond to parameters H2100 ~ H2105 in VFD-M. When X1 = On, PLC LINK will be
enabled, and the data in H2100 ~ H2105 will be displayed in D1480 ~ D1485.
D1496 ~ D1497 correspond to parameters H2000 ~ H2001 in VFD-M. When X1 = On, PLC LINK will be
enabled, and the data in H2000 ~ H2001 will be displayed in D1496 ~ D1497.
Modify D1496 to give command to VFD, e.g. D1496 = H12: enabling forward revolution of VFD-M; D1496
= H11: enabling reverse revolution of VFD.
Modify D1497 to change the frequency of VFD, e.g. D1497 = K5,000: changing the frequency to 50kHz.
The Master PLC has to be SA/SX/SC/EH2/SV/EH3/SV2 series MPU, and the Slave AC motor drive can
be any VFD series models except VFD-A.
2-148

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
The Slave can also be Delta temperature controller DTA, DTB, Delta servo ASDA and so on which are
compatible to Modbus protocol. Maximum 16 devices are connectable to the LINK.
See the tables of special M and special D for the starting ID of Slave to be read/written and the number of
data to be read/written.

2.12

Communication Addresses of Devices in DVP Series PLC
Applicable to
Device

Range

Type

DVP Com.
Address (hex)

Modbus Com.
Address (dec)

S

000 ~ 255

bit

0000 ~ 00FF

000001 ~ 000256

S

246 ~ 511

bit

0100 ~ 01FF

000247 ~ 000512

S

512 ~ 767

bit

0200 ~ 02FF

000513 ~ 000768

S

768 ~ 1,023

bit

0300 ~ 03FF

000769 ~ 001024

X

000 ~ 377 (Octal)

bit

0400 ~ 04FF

101025 ~ 101280

Y

000 ~ 377 (Octal)

bit

0500 ~ 05FF

001281 ~ 001536

T

000 ~ 255

bit

0600 ~ 06FF

001537 ~ 001792

word

0600 ~ 06FF

401537 ~ 401792

M

000 ~ 255

bit

0800 ~ 08FF

002049 ~ 002304

M

256 ~ 511

bit

0900 ~ 09FF

002305 ~ 002560

M

512 ~ 767

bit

0A00 ~ 0AFF

002561 ~ 002816

M

768 ~ 1,023

bit

0B00 ~ 0BFF

002817 ~ 003072

M

1,024 ~ 1,279

bit

0C00 ~ 0CFF

003073 ~ 003328

M

1,280 ~ 1,535

bit

0D00 ~ 0DFF

003329 ~ 003584

M

1,536 ~ 1,791

bit

B000 ~ B0FF

045057 ~ 045312

M

1,792 ~ 2,047

bit

B100 ~ B1FF

045313 ~ 045568

M

2,048 ~ 2,303

bit

B200 ~ B2FF

045569 ~ 045824

M

2,304 ~ 2,559

bit

B300 ~ B3FF

045825 ~ 046080

M

2,560 ~ 2,815

bit

B400 ~ B4FF

046081 ~ 046336

M

2,816 ~ 3,071

bit

B500 ~ B5FF

046337 ~ 046592

M

3,072 ~ 3,327

bit

B600 ~ B6FF

046593 ~ 046848

M

3,328 ~ 3,583

bit

B700 ~ B7FF

046849 ~ 047104

M

3,584 ~ 3,839

bit

B800 ~ B8FF

047105 ~ 047360

M

3,840 ~ 4,095

bit

B900 ~ B9FF

047361 ~ 047616

bit

0E00 ~ 0EC7

003585 ~ 003784

word

0E00 ~ 0EC7

403585 ~ 403784

bit

0EC8 ~ 0EFF

003785 ~ 003840

word

0700 ~ 076F

403785 ~ 403840

0 ~ 199

16-bit

C
200 ~ 255 32-bit
D

000 ~ 256

word

1000 ~ 10FF

404097~404352

D

256 ~ 511

word

1100 ~ 11FF

404353 ~ 404608

DVP-PLC Application Manual

EH2/
ES/EX/SS SA/SX/SC EH2-SL/SV
/EH3/SV2
0 ~ 127
0 ~ 1,023

0 ~ 1,023

0 ~ 177

0 ~ 177

0 ~ 377

0 ~ 177

0 ~ 177

0 ~ 377

0 ~ 127

0 ~ 255

0 ~ 255

0 ~ 4,095

0 ~ 4,095

0 ~ 199

0 ~ 199

-

0 ~ 1,279

-

0 ~ 127

232 ~ 255 200 ~ 255 200 ~ 255
0 ~ 1,311

0 ~ 4,999

0 ~ 9,999

2-149

2 Functions of Devices in DVP-PLC
Applicable to
Device

2-150

Range

Type

DVP Com.
Address (hex)

Modbus Com.
Address (dec)

D

512 ~ 767

word

1200 ~ 12FF

404609 ~ 404864

D

768 ~ 1,023

word

1300 ~ 13FF

404865 ~ 405120

D

1,024 ~ 1,279

word

1400 ~ 14FF

405121 ~ 405376

D

1,280 ~ 1,535

word

1500 ~ 15FF

405377 ~ 405632

D

1,536 ~ 1,791

word

1600 ~ 16FF

405633 ~ 405888

D

1,792 ~ 2,047

word

1700 ~ 17FF

405889 ~ 406144

D

2,048 ~ 2,303

word

1800 ~ 18FF

406145 ~ 406400

D

2,304 ~ 2,559

word

1900 ~ 19FF

406401 ~ 406656

D

2,560 ~ 2 815

word

1A00 ~ 1AFF

406657 ~ 406912

D

2,816 ~ 3,071

word

1B00 ~ 1BFF

406913 ~ 407168

D

3,072 ~ 3,327

word

1C00 ~ 1CFF

407169 ~ 407424

D

3,328 ~ 3,583

word

1D00 ~ 1DFF

407425 ~ 407680

D

3,584 ~ 3,839

word

1E00 ~ 1EFF

407681 ~ 407936

D

3,840 ~ 4,095

word

1F00 ~ 1FFF

407937 ~ 408192

D

4,096 ~ 4,351

word

9000 ~ 90FF

436865 ~ 437120

D

4,352 ~ 4,607

word

9100 ~ 91FF

437121 ~ 437376

D

4 608 ~ 4863

word

9200 ~ 92FF

437377 ~ 437632

D

4,864 ~ 5,119

word

9300 ~ 93FF

437633 ~ 437888

D

5,120 ~ 5,375

word

9400 ~ 94FF

437889 ~ 438144

D

5,376 ~ 5,631

word

9500 ~ 95FF

438145 ~ 438400

D

5,632 ~ 5,887

word

9600 ~ 96FF

438401 ~ 438656

D

5,888 ~ 6,143

word

9700 ~ 97FF

438657 ~ 438912

D

6,144 ~ 6,399

word

9800 ~ 98FF

438913 ~ 439168

D

6,400 ~ 6,655

word

9900 ~ 99FF

439169 ~ 439424

D

6,656 ~ 6,911

word

9A00 ~ 9AFF

439425 ~ 439680

D

6,912 ~ 7,167

word

9B00 ~ 9BFF

439681 ~ 439936

D

7,168 ~ 7,423

word

9C00 ~ 9CFF

439937 ~ 440192

D

7,424 ~ 7,679

word

9D00 ~ 9DFF

440193 ~ 440448

D

7,680 ~ 7,935

word

9E00 ~ 9EFF

440449 ~ 440704

D

7,936 ~ 8,191

word

9F00 ~ 9FFF

440705 ~ 440960

D

8,192 ~ 8,447

word

A000 ~ A0FF

440961 ~ 441216

D

8,448 ~ 8,703

word

A100 ~ A1FF

441217 ~ 441472

D

8,704 ~ 8,959

word

A200 ~ A2FF

441473 ~ 441728

D

8,960 ~ 9,215

word

A300 ~ A3FF

441729 ~ 441984

D

9,216 ~ 9,471

word

A400 ~ A4FF

441985 ~ 442240

D

9,472 ~ 9,727

word

A500 ~ A5FF

442241 ~ 442496

EH2/
ES/EX/SS SA/SX/SC EH2-SL/SV
/EH3/SV2

0 ~ 9,999

0 ~ 1,311
-

0 ~ 4,999

-

DVP-PLC Application Manual

2 Functions of Devices in DVP-PLC
Applicable to
Device

2.13

Range

Type

DVP Com.
Address (hex)

Modbus Com.
Address (dec)

D

9,728 ~ 9,983

word

A600 ~ A6FF

442497 ~ 442752

D

9,984 ~ 9,999

word

A700 ~ A70F

442753 ~ 443008

EH2/
ES/EX/SS SA/SX/SC EH2-SL/SV
/EH3/SV2

Error Codes
After you write the program into the PLC, the illegal use of operands (devices) or incorrect syntax in the program

will result in flashing of ERROR indicator and M1004 = On. In this case, you can find out the cause of the error by
checking the error code (hex) in special register D1004. The address where the error occurs is stored in the data
register D1137. If the error is a general loop error, the address stored in D1137 will be invalid.
Error
code

Cause of error

Error
code

Cause of error

0001

Use of device S exceeds the range

0F0A

Times of using TTMR, STMR instruction
exceed the range

0002

Using P* repeatedly or use of P* exceeds the
range

0F0B

Times of using SORT instruction exceed the
range

0003

Use of KnSm exceeds the range

0F0C

Times of using TKY instruction exceed the
range

0102

Using I* repeatedly or use of I* exceeds the
range

0F0D

Times of using HKY instruction exceed the
range

0202

Use of MC N* exceeds the range

1000

Improper use of operands of ZRST instruction

0302

Use of MCR N* exceeds the range

10EF

Incorrect use of E, F, or the modification
exceeds the range

0401

Use of device X exceeds the range

0403

Use of KnXm exceeds the range

2000

0501

Use of device Y exceeds the range

Times of using TTMR, PR, HOUR instructions
exceed the range.
Improper use of operands of MRT, ARWS
instructions

0503

Use of KnYm exceeds the range

C400

Illegal instruction

0601

Use of device T exceeds the range

C401

General loop error

0604

Use of register T exceeds the range

C402

Continuously using LD/LDI instructions for
more than 9 times

0801

Use of device M exceeds the range

C403

Continuously using MPS for more than 9 times

0803

Use of KnMm exceeds the range

C404

More than 6 steps in FOR – NEXT

0B01

Incorrect use of KH

0D01

Improper use of operands of DECO instruction
C405

0D02

ES/EX/SS/EH2/SV/EH3/SV2: improper use of
operands of ENCO instruction
SA/SX/SC: illegal use of the first operand of
ANS instruction

Using STL/RET between FOR – NEXT
Using SRET/IRET between FOR – NEXT
Using MC/MCR between FOR – NEXT
Using END/FEND between FOR – NEXT

0D03

Improper use of operands of DHSCS
instruction

C407

Continuously using STL for more than 9 times

0D04

Improper use of operands of DHSCR
instruction

C408

Using MC/MCR in STL, using I/P in STL

DVP-PLC Application Manual

2-151

2 Functions of Devices in DVP-PLC
Error
code

Cause of error

Error
code

Cause of error

C409

Using STL/RET in subroutine
Using STL/RET in interruption subroutine

C40A

Using MC/MCR in subroutine
Using MC/MCR in interruption subroutine

Improper use of operands of FROM/TO
instruction

C40B

MC/MCR does not start from N0, or is not
continuous

0D08

Improper use of operands of PID instruction

C40C Corresponding N of MC and MCR are different

0D09

Improper use of operands of SPD instruction

C40D Improper use of I/P

0D0A

Incorrect operands in DHSZ instruction

C40E

IRET does not appear after the last FEND
SRET does not appear after the last FEND

0D0B

Improper use of operands in IST instruction

C40F

PLC program and data in parameters have not
been initialized

0E01

Use of device C exceeds the range

C41B

Invalid RUN/STOP instruction to extension
module

0E04

Use of register C exceeds the range

C41C Points of extension module exceed the range

0E05

Improper use of operand CXXX of DCNT
instsruction

C41D

Number of extension modules exceeds the
range

0E18

BCD conversion error

C41E

Incorrect hardware setting for extension module

0E19

Division error (divisor = 0)

C41F

Failing to write data into memory

0E1A

Use of device exceeds the range (including E,
F index register modification)

C420

Read/write function card error

0E1B

The index of the radical is a negative value

C430

Initializing parallel interface error

0E1C

Communication error of FROM/TO instruction

C440

Hardware error in high-speed counter

0F04

Use of register D exceeds the range

C441

Hardware error in high-speed comparator

0F05

Improper use of operand DXXX of DCNT
instruction

C442

Hardware error in MCU pulse output

0F06

Improper use of operands of SFTR instruction

C443

No response from extension unit

0F07

Improper use of operands of SFTL instruction

C4EE No END instruction in the program

0F08

Improper use of operands of REF instruction

C4FF

0F09

Improper use of operands of WSFR, WSFL
instructions

0D05

Improper use of operands of pulse output
instruction

0D06

Improper use of operands of PWM instruction

0D07

2-152

Invalid instruction (no such instruction existing)

DVP-PLC Application Manual

3 Basic Instructions
3.1 Basic Instructions and Step Ladder Instructions
ES includes ES/EX/SS; SA includes SA/SX/SC; EH includes EH2/SV/EH3/SV2.
For EH series MPU, the execution speed in the brackets ( ) refers to the execution speed of designated operand
M1536 ~ M4095.

Basic Instructions
Instruction
Code

Function

Operands

Execution speed (us)
ES

SA

EH

STEP Page

LD

Loading in A contact

X, Y, M, S, T, C

3.8

3.8

0.24 (0.56) 1~3

3-4

LDI

Loading in B contact

X, Y, M, S, T, C

3.88

3.88

0.24 (0.56) 1~3

3-4

AND

Series connection- A contact

X, Y, M, S, T, C

2.32

2.32

0.24 (0.56) 1~3

3-4

ANI

Series connection- B contact

X, Y, M, S, T, C

2.4

2.4

0.24 (0.56) 1~3

3-5

OR

Parallel connection- A contact

X, Y, M, S, T, C

2.32

2.32

0.24 (0.56) 1~3

3-5

ORI

Parallel connection- B contact

X, Y, M, S, T, C

2.4

2.4

0.24 (0.56) 1~3

3-6

ANB

Series connection- loop blocks

N/A

1.76

1.76

0.24

1~3

3-6

ORB

Parallel connection- loop blocks

N/A

1.76

1.76

0.24

1~3

3-7

1.68

1.68

0.24

1~3

3-7

1.6

1.6

0.24

1

3-7

1.6

1.6

0.24

1

3-7

MPS
MRD
MPP

Store the current result of the internal
N/A
PLC operations
Reads the current result of the
N/A
internal PLC operations
Pops (recalls and removes) the
N/A
currently stored result

Output instructions
Instruction
Code

Function

Operands

Execution speed (us)
ES

SA

EH

STEP Page

OUT

Output coil

Y, M, S

5.04

5.04

0.24 (0.56) 1~3

3-8

SET

Latched(On)

Y, M, S

3.8

3.8

0.24 (0.56) 1~3

3-8

RST

Clear the contacts or the registers

Y, M, S, T, C, D, E, F

7.8

7.8

0.24 (0.56)

3-9

3

Timers, Counters
API

Instruction
Code

Function

Operands

Execution speed (us)
ES

SA

EH

STEP Page

96

TMR

16-bit timer

T-K or T-D

10.6

10.6

9.6

4

3-9

97

CNT

16-bit counter

C-K or C-D (16 bits)

9.7

9.7

12.8

4

3-10

97

DCNT

32-bit counter

C-K or C-D (32 bits)

10.3

10.3

14.3

6

3-10

DVP-PLC Application Manual

3-1

3 Basic Instructions
Main control instructions
Instruction
Code

Function

Operands

Execution speed (us)
ES

SA

EH

STEP Page

MC

Master control start

N0 ~ N7

5.6

5.6

5.6

3

3-11

MCR

Master control reset

N0 ~ N7

5.7

5.7

5.7

3

3-11

Instructions for detecting the contacts of rising-/falling-edge
Instruction
Code

API

Function

Operands

Execution speed (us)
ES

SA

EH

STEP Page

90

LDP

Rising-edge detection operation

X, Y, M, S, T, C

5.1

5.1

0.56 (0.88)

3

3-12

91

LDF

Falling-edge detection operation

X, Y, M, S, T, C

5.1

5.1

0.56 (0.88)

3

3-13

92

ANDP

Rising-edge series connection

X, Y, M, S, T, C

4.9

4.9

0.56 (0.88)

3

3-13

93

ANDF

Falling-edge series connection

X, Y, M, S, T, C

4.9

4.9

0.56 (0.88)

3

3-13

94

ORP

Rising-edge parallel connection

X, Y, M, S, T, C

4.9

4.9

0.56 (0.88)

3

3-14

95

ORF

Falling-edge parallel connection

X, Y, M, S, T, C

4.9

4.9

0.56 (0.88)

3

3-14

Rising-/falling-edge output instructions
Instruction
Code

API

Function

Operands

Execution speed (us)
ES

SA

EH

STEP Page

89

PLS

Rising-edge output

Y, M

7.8

7.8

9.92

3

3-14

99

PLF

Falling-edge output

Y, M

7.8

7.8

10.16

3

3-15

End instruction
Instruction
Code

Function
Program ends

END

Operands
N/A

Execution speed (us)
ES

SA

EH

5

5

0.24

STEP Page
1

3-16

Other instructions
API

98

3-2

Instruction
Code

Function

Operands

Execution speed (us)
ES

SA

EH

STEP Page

NOP

No operation

N/A

0.88

0.88

0.16

1

3-16

INV

Inverting operation

N/A

1.6

1.6

0.24

1

3-16

P

Pointer

P0 ~ P255

0.88

0.88

-

1

3-17

I

Interruption program marker

I□□□

0.88

0.88

-

1

3-17

DVP-PLC Application Manual

3 Basic Instructions
Step ladder instructions
Instruction
Code

Function

Operands

Execution speed (us)
ES

SA

EH

STEP Page

STL

Step transition ladder start instruction

S

11.6

10.6

0.56

1

4-1

RET

Step transition ladder return instruction

N/A

7.04

6.04

0.24

1

4-1

Note 1: ES includes ES/EX/SS; SA includes SA/SX/SC; EH includes EH/EH2/SV.
Note 2: For EH series MPU, the execution speed in the brackets ( ) refers to the execution speed of designated
operand M1536 ~ M4095.

DVP-PLC Application Manual

3-3

3 Basic Instructions
3.2

Explanations on Basic Instructions

Mnemonic

Function

Program steps

Loading in A contact

LD

X0 ~ X377

Y0 ~ Y377

9

9

Operand

Controllers
ES

1

EX

M0 ~ M4095 S0 ~ S1023
9

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

-

9

Explanations:
The LD instruction is used on the A contact that has its start from the left BUS or the A contact that is the start of a
contact circuit. The functions are to save the present contents and store the acquired contact status into the
accumulative register.
Program Example:
Ladder diagram:

X0

X1
Y1

Mnemonic
LDI

Instruction code:

Operation:

LD

X0

Loading in contact A of X0

AND

X1

Connecting to contact A of X1 in series

OUT

Y1

Driving Y1 coil

Function

Program steps

Loading in B contact
X0 ~ X377

Y0 ~ Y377

9

9

Operand

Controllers
ES

1

M0 ~ M4095 S0 ~ S1023
9

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

-

9

Explanations:
The LDI instruction is used on the B contact that has its start from the left BUS or the B contact that is the start of a
contact circuit. The functions are to save the present contents and store the acquired contact status into the
accumulative register.
Program Example:
Ladder diagram:

X0

X1
Y1

Mnemonic
AND

Operand

Instruction code:

Operation:

LDI

X0

Loading in contact B of X0

AND

X1

Connecting to contact A of X1 in series

OUT

Y1

Driving Y1 coil

Function

Program steps

Series connection- A contact
X0 ~ X377

Y0 ~ Y377

9

9

Controllers
ES

1

M0 ~ M4095 S0 ~ S1023
9

9

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

-

Explanations:
The AND instruction is used in the series connection of A contact. The functions are to read out the status of present d

3-4

DVP-PLC Application Manual

3 Basic Instructions
series connection contacts and perform the “AND” operation with the logical operation result obtained. The final result
will be store in the accumulative register.
Program Example:
Ladder diagram:

X1

X0
Y1

Mnemonic
ANI

Operand

Instruction code:

Operation:

LDI

X1

Loading in contact B of X1

AND

X0

Connecting to contact A of X0 in series

OUT

Y1

Driving Y1 coil

Function

Program steps

Series connection- B contact
X0 ~ X377

Y0 ~ Y377

9

9

Controllers
ES

1

EX

M0 ~ M4095 S0 ~ S1023
9

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

-

9

Explanations:
The ANI instruction is used in the series connection of B contact. The functions are to read out the status of present
designated series connection contacts and perform the “AND” operation with the logical operation result obtained.
The final result will be store in the accumulative register.
Program Example:
Ladder diagram:

X1

X0
Y1

Mnemonic
OR

Operand

Instruction code:

Operation:

LD

X1

Loading in contact A of X1

ANI

X0

Connecting to contact B of X0 in series

OUT

Y1

Driving Y1 coil

Function

Program steps

Parallel connection- A contact
X0 ~ X377

Y0 ~ Y377

9

9

Controllers
ES

1

EX

M0 ~ M4095 S0 ~ S1023
9

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

-

9

Explanations:
The OR instruction is used in the parallel connection of A contact. The functions are to read out the status of present
designated parallel connection contacts and perform the “OR” operation with the logical operation result obtained.
The final result will be store in the accumulative register.
Program Example:
Ladder diagram:

X0
Y1
X1

DVP-PLC Application Manual

Instruction code:

Operation:

LD

X0

Loading in contact A of X0

OR

X1

Connecting to contact A of X1 in parallel

OUT

Y1

Driving Y1 coil

3-5

3 Basic Instructions
Mnemonic

Function

Program steps

ORI

Parallel connection- B contact

1

Operand

Controllers
ES

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

X0 ~ X377

Y0 ~ Y377

M0 ~ M4095

S0 ~ S1023

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

9

9

9

9

-

Explanations:
The OR instruction is used in the parallel connection of B contact. The functions are to read out the status of present
designated parallel connection contacts and perform the “OR” operation with the logical operation result obtained.
The final result will be store in the accumulative register.
Program Example:
Ladder diagram:

X0
Y1
X1

Instruction code:

Operation:

LD

X0

Loading in contact A of X0

ORI

X1

Connecting to contact B of X1 in parallel

OUT

Y1

Driving Y1 coil

Mnemonic

Function

Program steps

ANB

Series connection- loop blocks

1

Controllers
ES

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

N/A

Operand
Explanations:

To perform the “AND” operation of the preserved logic results and content in the accumulative register.
Program Example:
Ladder diagram:
X0 ANB X1
X2

X3

Block A Block B

Y1

Instruction code:

Operation:

LD

X0

Loading in contact A of X0

ORI

X2

Connecting to contact B of X2 in parallel

LDI

X1

Loading in contact B of X1

OR

X3

Connecting to contact A of X3 in parallel

OUT

3-6

Connecting circuit block in series

ANB
Y1

Driving Y1 coil

DVP-PLC Application Manual

3 Basic Instructions
Mnemonic
ORB

Function

Program steps

Parallel connection- loop
blocks

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

N/A

Operand
Explanations:

To perform the “OR” operation of the preserved logic results and content in the accumulative register.
Program Example:
Ladder diagram:
X0
X1 Block A

Y1
X2

X3
ORB
Block B

Instruction code:

Operation:

LD

X0

Loading in contact A of X0

ANI

X1

Connecting to contact B of X1 in series

LDI

X2

Loading in contact B of X2

AND

X3

Connecting to contact A of X3 in series
Connecting circuit block in parallel

ORB
OUT

Y1

Driving Y1 coil

Mnemonic

Function

Program steps

MPS

Store the current result of
the internal PLC operations

1

Controllers
ES

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

N/A

Operand
Explanations:

To save the content in the accumulative register into the operational result (the pointer of operational result will plus
1).

Mnemonic

Function

MRD

Reads the current result of
the internal PLC operations

Program steps

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

N/A

Operand
Explanations:

To read the operational result and store it into the accumulative register (the pointer of operational result stays intact).

Mnemonic

Function

Program steps

MPP

Pops (recalls and removes)
the currently stored result

1

Operand

Controllers
ES

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

N/A

Explanations:
To retrieve the previous preserved logical operation result and store it into the accumulative register (the pointer of
operational result will minus 1).

DVP-PLC Application Manual

3-7

3 Basic Instructions
Program Example:
Ladder diagram:
MPS

X0

X1

Operation:

LD

Loading in contact A of X0

X0

Saving into stack

MPS

Y1

AND

X1

Connecting to contact A of X1 in series

M0

OUT

Y1

Driving Y1 coil

Y2

MRD

X2
MRD

Instruction code:

MPP

END

Reading from stack

AND

X2

Connecting to contact A of X2 in series

OUT

M0

Driving M0 coil
Reading from stack and pop pointer

MPP
OUT

Y2

Driving Y2 coil

END

Mnemonic

Function

Program steps

Output coil

OUT

Operand

Program ends

Controllers
ES

1

X0 ~ X377

Y0 ~ Y377

-

9

EX

M0 ~ M4095 S0 ~ S1023
9

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

-

-

-

9

Explanations:
1. To output the logical operation result before OUT instruction into a designated device.
2. Actions of coil contact:
OUT instruction
Operational result

Coil

Contact
A contact (normally open)

B contact (normally closed)

FALSE

Off

Off

On

TRUE

On

On

Off

Program Example:
Ladder diagram:
X0

X1
Y1

Mnemonic
SET

Operand

Function

Instruction code:

Operation:

LDI

X0

Loading in contact B of X0

AND

X1

Connecting to contact A of X1 in series

OUT

Y1

Driving Y1 coil

Program Steps

Latched (On)

Controllers
ES

1

X0 ~ X377

Y0 ~ Y377

-

9

M0 ~ M4095 S0 ~ S1023
9

9

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

-

-

-

Explanations:

3-8

DVP-PLC Application Manual

3 Basic Instructions
When the SET instruction is driven, its designated device will be “On” and keep being On both when SET instruction
is still being driven or not driven. Use RST instruction to set “Off” the device.
Program Example:
Ladder diagram:

X0

Y0
SET

Mnemonic
RST

Operand

Y1

Function

Instruction code:

Operation:

LD

X0

Loading in contact A of X0

ANI

Y0

Connecting to contact B of Y0 in series

SET

Y1

Y1 latched (On)

Program steps

Clear the contacts or
the registers
X0 ~ X377 Y0 ~ Y377
9

-

Controllers
ES

1
M0 ~
M4095

EX

SS

SA

SX

SC

S0 ~ S1023 T0 ~ T255 C0 ~ C255

9

9

9

EH2

SV

EH3 SV2

D0 ~
D9999

E0 ~ E7
F0 ~ F7

9

9

9

Explanations:
1. When the RST instruction is driven, the actions of the designated devices are:
Device
Y, M, S,
T, C
D, E, F

Status
Coil and contact will be set to “Off”
Present values of the timer or counter will be set to “0”, and the coil and contact will be set to
“Off”
The content will be set to “0”.

2. If RST instruction is not being executed, the status of the designated device will stay intact.
Program Example:
Ladder diagram:

X0
RST

Mnemonic
TMR

Y5

Function
16-bit timer

Instruction code:

Operation:

LD

X0

Loading in contact A of X0

RST

Y5

Resetting contact Y5

Program steps
1

T-K

T0 ~ T255, K0 ~ K32,767

T-D

T0 ~ T255, D0 ~ D9999

Controllers
ES

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

Operand

Explanations:
When TMR instruction is executed, the designated coil of the timer will be On and the timer will start to time. When the
set value in the timer is reached (present ≥ set value), the contact will be:
NO (Normally Open) contact

Open collector

NC (Normally Closed) contact

Close collector

DVP-PLC Application Manual

3-9

3 Basic Instructions
Program Example:
Ladder diagram:

X0
TMR

T5

K1000

Instruction code:

Operation:

LD

X0

Loading in contact A of X0 T5 timer

TMR

T5 K1000

Set value in timer T5 as K1,000

Remarks:
See the specification of each model for the range of operand T.

Mnemonic

Function

Program steps

16-bit counter

CNT

Controllers
ES

1

C-K

C0 ~ C199, K0~K32,767

C-D

C0 ~ C199, D0 ~ D9999

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

Operand

Explanations:
1.

When the CNT instruction goes from Off to On, the designated counter coil will be driven, and the present value
in the counter will plus 1. When the counting reaches the set value (present value = set value), the contact will
be:

2.

NO (Normally Open) contact

Open collector

NC (Normally Closed) contact

Close collector

If there are other counting pulse input after the counting reaches its target, the contact and present value will
stay intact. Use RST instruction to restart or reset the counting.

Program Example:
Ladder diagram:

X0
CNT

Mnemonic
DCNT

C20

Function
32-bit counter

K100

Instruction code:

Operation:

LD

X0

Loading in contact A of X0

CNT

C20 K100 Set value in counter C20 as K100

Program steps
1

Controllers
ES

EX

SS

SA

SX

C-K

C200 ~ C255, K-2,147,483,648 ~ K2,147,483,647

C-D

C200 ~ C255, D0 ~ D9999

SC

EH2

SV

EH3 SV2

Operand

Explanations:
1.

DCNT is the instruction for enabling the 32-bit high-speed counters C200 ~ C255.

2.

For general purpose addition/subtraction counters C200 ~ C234, when DCNT goes from Off to On, the present
value in the counter will pulse 1 (counting up) or minus 1 (counting down) according to the modes set in special
M1200 ~ M1235.

3.

For high-speed addition/subtraction counters C235 ~ C255, when the high-speed counting pulse input goes
from Off to On, the counting will start its execution. For the input terminals (X0 ~ X17) and counting methods

3-10

DVP-PLC Application Manual

3 Basic Instructions
(counting up/down) of the high-speed counter, see Chapter 2.7 Numbering and Function of Counter [C] for more
details.
4.

When DCNT is Off, the counting will stop, but the existing present value in the counter will not be cleared. To
clear the present value and the contact, you have to use the instruction RST C2XX. Use externally designated
input points to clear the present values and contacts of high-speed addition/subtraction counters C235 ~ C255.

Program Example:
Ladder diagram:

M0
DCNT

C254

Mnemonic

K1000

Function

MC / MCR

Master control
Start/Reset

Operand

N0 ~ N7

Instruction code:

Operation:

LD

M0

Loading in contact A of M0

DCNT

C254 K1000 Set value of counter C254 as K1,000

Program steps
1

Controllers
ES

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

Explanations:
1.

MC is the main-control start instruction. When MC instruction is executed, the execution of instructions between
MC and MCR will not be interrupted. When MC instruction is Off, the actions of the instructions between MC and
MCR are:
Instruction type

2.

Explanation

General purpose timer

Present value = 0
Coil is Off, No action for the contact

Accumulative timer

Coil is Off, present value and contact stay intact

Subroutine timer

Present value = 0
Coil is Off, No action for the contact

Counter

Coil is Off, present value and contact stay intact

Coils driven by OUT
instruction

All Off

Devices driven by SET and
RST instructions

Stay intact

Application instructions

All disabled.
The FOR-NEXT nested loop will still execute back and forth for N times.
Instructions between FOR-NEXT will act as the instructions between MC
and MCR.

MCR is the main-control end instruction that is placed in the end of the main-control program. There should not
be any contact instructions prior to MCR instruction.

3.

MC-MCR main-control program instructions support the nested program structure (max. 8 layers) and please
use the instruction in the order N0 ~ N7.

DVP-PLC Application Manual

3-11

3 Basic Instructions
Program Example:
Ladder diagram:
X0

MC

N0

X1
Y0
X2
MC

N1

X3
Y1
MCR

N1

MCR

N0

MC

N0

X10
X11
Y10
MCR

Mnemonic

N0

Instruction code:

Operation:

LD
MC
LD
OUT
:
LD
MC
LD
OUT
:
MCR
:
MCR
:
LD
MC
LD
OUT
:
MCR

X0
N0
X1
Y0

Loading in A contact of X0
Enabling N0 common series connection contact
Loading in A contact of X1
Driving Y0 coil

X2
N1
X3
Y1

Loading in A contact of X2
Enabling N1 common series connection contact
Loading in A contact of X3
Driving Y1 coil

N1

Disabling N1 common series connection contact

N0

Disabling N0 common series connection contact

X10
N0
X11
Y10

Loading in A contact of X10
Enabling N0 common series connection contact
Loading in A contact of X11
Driving Y10 coil

N0

Disabling N0 common series connection contact

Function

Program steps

Rising-edge detection
operation

LDP

Operand

X0 ~ X377 Y0 ~ Y377 M0 ~ M4095 S0 ~ S1023
9

9

Controllers
ES

1

9

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

-

9

Explanations:
The method of using LDP is the same as using LD, but the actions of the two instructions differ. LDP saves the current
content and store the detected status of rising-edge to the accumulative register.
Program Example:
Ladder diagram:

X0

X1
Y1

Instruction code:

Operation:

LDP

X0

Starting X0 rising-edge detection

AND

X1

Series connecting A contact of X1

OUT

Y1

Driving Y1 coil

Remarks:
1.

See the specification of each model for the range of operands.

2.

If the status of a designated rising-edge is On before the PLC is powered, the contact of the rising-edge will be
TRUE after PLC is powered.

3-12

DVP-PLC Application Manual

3 Basic Instructions
Mnemonic

Function

Program steps

Falling-edge detection
operation

LDF

Operand

X0 ~ X377

Y0 ~ Y377 M0 ~ M4095 S0 ~ S1023

9

9

9

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

-

9

Explanations:
The method of using LDF is the same as using LD, but the actions of the two instructions differ. LDF saves the current
content and store the detected status of falling-edge to the accumulative register.
Program Example:
Ladder diagram:

X0

X1
Y1

Mnemonic

Operation:

LDF

X0

Starting X0 falling-edge detection

AND

X1

Series connecting A contact of X1

OUT

Y1

Driving Y1 coil

Function

Program steps

Rising-edge series
connection

ANDP

Operand

Instruction code:

X0 ~ X377 Y0 ~ Y377
9

9

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

M0 ~
M4095

S0 ~ S1023

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

9

9

-

Explanations:
ANDP instruction is used in the series connection of the contacts’ rising-edge detection.
Program Example:
Ladder diagram:

X0

X1
Y1

Mnemonic
ANDF

Operand

Instruction code:

Operation:

LD

X0

Loading in A contact of X0

ANDP

X1

X1 rising-edge detection in series connection

OUT

Y1

Driving Y1 coil

Function

Program steps

Falling-edge series
connection
X0 ~ X377 Y0 ~ Y377
9

9

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

M0 ~
M4095

S0 ~ S1023

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

9

9

-

Explanations:
ANDF instruction is used in the series connection of the contacts’ falling-edge detection.

DVP-PLC Application Manual

3-13

3 Basic Instructions
[Program Example:
Ladder diagram:

X0

X1
Y1

Instruction code:

Operation:

LD

X0

Loading in A contact of X0

ANDF

X1

X1 falling-edge detection in series connection

OUT

Y1

Drive Y1 coil

Mnemonic

Function

Program steps

ORP

Rising-edge parallel
connection

1

Operand

Controllers
ES

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

X0 ~ X377

Y0 ~ Y377

M0 ~
M4095

S0 ~
S1023

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

9

9

9

9

-

Explanations:
The ORP instructions are used in the parallel connection of the contact’s rising-edge detection.
Program Example:
Ladder diagram:

X0
Y1
X1

Instruction code:

Operation:

LD

X0

Loading in A contact of X0

ORP

X1

X1 rising-edge detection in parallel connection

OUT

Y1

Driving Y1 coil

Mnemonic

Function

Program steps

ORF

Falling-edge parallel connection

1

Operand

X0 ~ X377

Y0 ~ Y377

9

9

Controllers
ES

M0 ~ M4095 S0 ~ S1023
9

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

9

9

-

9

Explanations:
The ORP instructions are used in the parallel connection of the contact’s falling-edge detection.
Program Example:
Ladder diagram:

X0
Y1
X1

Mnemonic
PLS

Operand

3-14

Function

Instruction code:

Operation:

LD

X0

Loading in A contact of X0

ORF

X1

X1 falling-edge detection in parallel connection

OUT

Y1

Driving Y1 coil

Program steps

Rising-edge output

Controllers
ES

1

X0 ~ X377

Y0 ~ Y377

-

9

M0 ~ M4095 S0 ~ S1023
9

-

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

-

-

-

DVP-PLC Application Manual

3 Basic Instructions
Explanations:
When X0 goes from Off to On (rising-edge trigger), PLS instruction will be executed and S will send out pulses for
once of 1 scan time.
Program Example:
Ladder diagram:
X0
PLS

M0

SET

Y0

M0

Instruction code:
LD
X0

Operation:

PLS

M0

M0 rising-edge output

LD

M0

Loading in contact A of M0

SET

Y0

Y0 latched (On)

Loading in A contact of X0

Timing Diagram:

X0
1 scan time

M0
Y0

Mnemonic
PLF

Operand

Function

Program steps

Falling-edge output
X0 ~ X377

Y0 ~ Y377

-

9

Controllers
ES

1

M0 ~ M4095 S0 ~ S1023
9

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

T0 ~ T255

C0 ~ C255

D0 ~ D9999

-

-

-

-

Explanations:
When X0 goes from On to Off (falling-edge trigger), PLF instruction will be executed and S will send out pulses for
once of 1 scan time.
Program Example:
Ladder diagram:
X0
PLF

M0

SET

Y0

M0

Instruction code:

Operation:

LD

X0

Loading in A contact of X0

PLF

M0

M0 falling-edge output

LD

M0

Loading in contact A of M0

SET

Y0

Y0 latched (On)

Timing Diagram:

X0
M0

1 scan time

Y0

DVP-PLC Application Manual

3-15

3 Basic Instructions
Mnemonic

Function

Program steps

Program End

END

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

N/A

Operand
Explanations:

END instruction has to be placed in the end of a ladder diagram or instruction program. PLC will start to scan from
address 0 to END instruction and return to address 0 to restart the scan.

Mnemonic

Function

Program steps

No operation

NOP

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

N/A

Operand
Explanations:

NOP instruction does not conduct any operations in the program; therefore, after the execution of NOP, the existing
logical operation result will be kept. If you want to delete a certain instruction without altering the length of the program,
you can use NOP instruction.
Program Example:
Ladder diagram:

NOP instruction will be
omitted in the ladder diagram

Instruction code:

Operation:

LD

Loading in B contact of X0

X0

OUT

X0

Y1

Driving Y1 coil

Y1

NOP

Mnemonic
INV

No operation

NOP

Function

Program steps

Inverting Operation

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

N/A

Operand
Explanations:

The logical operation result before INV instruction will be inverted and stored in the accumulative register.
Program Example:
Ladder diagram:

X0
Y1

Instruction code:

Operation:

LD

Loading in A contact of X0
Inverting the operation result

INV
OUT

3-16

X0
Y1

Driving Y1 coil

DVP-PLC Application Manual

3 Basic Instructions
Mnemonic

Function

Program steps

Pointer

P

1

Controllers
ES

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

P0 ~ P255

Operand
Explanations:

Pointer P is used in API 00 CJ and API 01 CALL instructions. The use of P does not need to start from No. 0, and the
No. of P cannot be repeated; otherwise, unexpected errors may occur.
Program Example:
Ladder diagram:
X0
CJ

P10

Instruction code:

Operation:

LD

X0

Loading in A contact of X0

CJ

P10

From instruction CJ to P10

:

X1
Y1

P10

Pointer P10

P10
LD

X1

Loading in A contact of X1

OUT

Y1

Driving Y1 coil

Mnemonic

Function

Program steps

I

Interruption program marker (I)

1

Controllers
ES

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

I00□, I10□, I20□, I30□, I40□, I50□, I6□□, I7□□, I8□□
Operand

I010, I020, I030, I040, I050, I060, I110, I120, I130, I140, I150, I160, I170, I180

Explanations:
A interruption program has to start with a interruption pointer (I□□□) and ends with API 03 IRET. I instruction has to
be used with API 03 IRET, API 04 EI, and API 05 DI. See Chapter 2.9 for pointers of all DVP series PLCs.
Program Example:
Ladder diagram:

Instruction code: Operation:
EI

X1
Y1

EI
Allowable range
for interruption

Enabling interruption

LD

X1

Loading A contact of X1

OUT

Y1

Driving Y1 coil

:
DI

DI

Pointer of
interruption
program

Disabling interruption

:
FEND
X2

I 001

Y2
IRET

Interruption
subroutine

FEND

Main program ends

I001

Interruption pointer

LD

X2

Loading in A contact of X2

OUT

Y2

Driving Y2 coil

:
IRET

DVP-PLC Application Manual

Interruption return

3-17

3 Basic Instructions
MEMO

3-18

DVP-PLC Application Manual

4 Step Ladder Instructions
4.1

Step Ladder Instructions [STL], [RET]

Mnemonic
STL
Operand

Function
Step Transition Ladder Start

Program steps

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

S0 ~ S1023

Explanations:
STL Sn constructs a step. When STL instruction appears in the program, the program will enter a step ladder diagram
status controlled by steps. The initial status has to start from S0 ~ S9. RET instruction indicates the end of a step
ladder diagram starting from S0 ~ S9 and the bus returns to a normal ladder diagram instruction. SFC uses the step
ladder diagram composed of STL/RET to complete the action of a circuit. The No. of S cannot be repeated.

Mnemonic
RET

Function
Step Transition Ladder Return

Operand

Program
steps

Controllers
ES

1

EX

SS

SA

SX

SC

EH2

SV

EH3 SV2

N/A

Explanations:
RET indicates the end of a step. There has to be a RET instruction in the end of a series of steps. One PLC program
can be written in maximum 10 steps (S0 ~ S9) and every step should end with a RET.

DVP-PLC Application Manual

4-1

4 Step Ladder Instructions
Program Example:
Ladder diagram:

SFC:

M1002

ZRST

S0

SET

S0

SET

S20

S127

M1002
S0

S0
S

X0

S20
S

S30

X1

SET

S30

SET

Y0

S40

Y2

Y1

X2
S40

Y1
X2

S40
S

S20
X1

Y0

S30
S

X0

Y2

X3
S0

X3

S0
RET
END

4.2

Sequential Function Chart (SFC)

In automation, we always need electric control to work with mechanical control for an automation control. The
sequential control can be divided into several orderly steps (or stages). Each step has its actions that should be
completed and the transition from one step to another normally requires some criteria. The action of the last step
finishes when all criteria is true and the beginning of the next step will clear the actions of the last step. This is the
concept of designing a sequential function chart (SFC).

4-2

DVP-PLC Application Manual

4 Step Ladder Instructions
Features:
1. No sequential design is required for constant step actions, and PLC will

SFC:

automatically execute the interlocking and dual outputs among all status. An
easy sequential design is the only thing required to make the machine work

S0

normally.
2. The actions in SFC are easy to understand, adjust for a trial operation, detect
the errors and maintain.
3. SFC is a type of diagram editing. The structure of a SFC looks like a flow chart.
Every No. of the step relay S inside the PLC represents a step, equal to every
processing procedure in a flow chart. When the current procedure is

X0
S21
X1

X2

S22

S24

X3

completed, the program will move to the next step according to the set
transition criteria. Therefore, you can repeat the cycle and obtain the result you
desire.

X4
S24

4. See the SFC chart in the right hand side: The initial step S0 transfers to a
general purpose step S21 by making the status transition condition X0
condition true. S21 transfer to S22 or jumps to S24 by making X1 or X2 true. In
step S25, X6 will be true and the chart will return to S0 to complete a cycle. The
cycle and be repeated to reach a cyclic control.

X5
S25
X6
S0

5. Next are some basic icons for drawing SFC in WPLSoft SFC editor.
Ladder diagram mode. The icon indicates that the internal editing program is a general ladder
diagram, not a step ladder program.
Initial step in SFC. Applicable for S0 ~ S9.
General step. Applicable for S10 ~ S1023.
Step jumps. Used for a step to jump to another non-adjacent step.
(Jumping up/down to non-adjacent steps in the same sequence, returning to initial step, or
jumping among different sequences.)
Transition condition between steps.
Alternative divergence. The same step transfers to a corresponding step by different transition
condition.
Alternative convergence. More than 2 steps transfer to the same step by transition condition.
Simultaneous divergence. The same step transfers to more than 2 steps by the same transition
condition.
Simultaneous convergence. More than 2 steps transfer to the same step by a single transition
condition.

4.3

How does a Step Ladder Instruction Work?
STL instruction is used for designing the syntax of a sequential function chart (SFC), making the program

designing similar to drawing a flow chart and allowing a more explicit and readable program. From the figure in the left
hand side below, we can see very clearly the sequence to be designed, and we can convert the sequence into the
step ladder diagram in the right hand side.

DVP-PLC Application Manual

4-3

4 Step Ladder Instructions
RET instruction has to be written at the end of every step sequence, representing the end of a sequence. There
can be more than one step sequence in a program. Therefore, we have to write in RET at the end of every step
sequence. There is no limitation on the times of using RET which is used together with S0 ~ S9.
If there is no RET instruction at the end of a step sequence, errors will be detected by WPL editor.

M1002
initial pulse
S0

S21

S22

M1002

SET

S0

S0
S

SET

S21

S21
S

SET

S22

S22
S

SET

S23

S23
S

S0

S23
RET

1. Actions of Step Ladder:
A step ladder is composed of many steps and every step controls an action in the sequence. The step ladder
has to:
a) Drive the output coil
b) Designate the transition condition
c) Designate which step will take over the control from the current step
Example:

S10
S

S10
S

Y0
SET

Y1

X0

SET
S20
S

Y0

S20

Y10
X1

When X0=On,
S20 = On,
S10 = Off.

SET

Y1

SET

S20

X0
S20
S

Y10
X1

SET

S30

SET

S30

Explanation:
When S10 = On, Y0 and Y1 will be On. When X0 = On, S20 will be On and Y10 will be On. When S10 = Off, Y0
will be Off and Y1 will be On.
2. Timing Diagram of Step Ladder:
When the status contact Sn = On, the circuit will be activated. When Sn = Off, the circuit will be disactivated. The
actions will delay for 1 scan time.

4-4

DVP-PLC Application Manual

4 Step Ladder Instructions
S10
S

Executing the timing diagram below. After the

Y10
X0

status of S10 and S12 are transferred (taking place
SET

S12
S

S12

simultaneously), and after a delay of 1 scan time,

Y11

Y10 will be Off and Y11 will be On. There will not be

X1

SET

overlapping outputs.

S14
STL S10
Pro gram
execution

Ren ew I nput/ Out put
Pro gram
execution

Pro gram
execution

S10
Y10

Circuit no t activate d

X0
S12
Y11
X1

3. Repeated Use of Output Coil:
a)

You can use output coils of the same No. in different steps.

b)

See the diagram in the right. There can be the same
output device (Y0) among different statuses. Y0 will be On
when S10 or S20 is On. Such as right diagram, there is the

S10
S

Y0

same output device Y0 in the different state. No matter
S10 or S20 is On, Y0 will be On.
c)

Y0 will be Off when S10 is transferring to S20. After S20 is
On, Y0 will output again. Therefore in this case, Y0 will be
On when S10 or S20 is On.

d)

Normally in a ladder diagram, avoid repeated use of an

SET

Y1

SET

S20

X0
S20
S

Y0
X1

SET

S30

output coil. The No. of output coil used by a step should
also avoid being used when the step ladder diagram
returns to a general ladder diagram.

DVP-PLC Application Manual

4-5

4 Step Ladder Instructions
4. Repeated Use of Timer:
The timers in EH2/SV series MPU are the same as general
output points and can be repeatedly used in different steps.
This is one of the features of the step ladder diagram.
S20

However, in a general ladder diagram, it is better not be

TMR

T1

K10

TMR

T2

K20

TMR

T1

K30

X1

repeatedly use the output coil. Also avoid using the No. of the

S30

output coil used by a step after the step ladder diagram returns

X2

to a general ladder diagram.

S40

Note: See the figure in the right. The timers in ES/EX/SS/SA/
SX/SC series MPU can be used repeatedly in non-adjacent
steps.
5. Transfer of Step:
SET Sn and OUT Sn instructions are used to enable (or transfer to) another step. When the control power is
shifted to another step, the status of the previous step S and the action of the output point will be cleared. Due to
that there can be many step control sequences (i.e. the step ladder diagram starting with S0 ~ S9) co-existing in
the program. The transfer of a step can take place in the same step sequence, or be transferred to different step
sequence. Therefore, there are some slight differences regarding how to use SET Sn and OUT Sn. See the
explanations below.
SET Sn

Used for driving the next

S10
Y10

S

step in the same

X0
SET

sequence. After the

S12

When SET S12 instruction is executed,
S10 will transfer to S12, and S10 and all
its outputs (Y10) will be cleared.

S12

transition, all output from

Y11

S

X1

the previous status will be

SET

S14

cleared.
OUT Sn

Used for returning to the initial step in the same step sequence. Also for jumping up/down to
non-adjacent steps in the same sequence, or separating steps in different sequences. After the
transition, all output from the previous status will be cleared.
c Returning to the
initial step in the

SFC:

Ladder diagram:
OUT

S0

S0
S

S21

S21
S

same sequence.
d Jumping up/down

S24
S23
S

steps in the same
S24

OUT

S25
X7
S25 returns to the initial
step S0 by using OUT.

4-6

Using OUT S24

X2

X2

to non-adjacent

sequence.

Driving the jumping
of step

S24
S
S25
S

Return to initial step
Using OUT S0

X7
S0
RET

DVP-PLC Application Manual

4 Step Ladder Instructions
e Separating steps

SFC:

Ladder diagram:

in different
OUT

sequences.

OUT

S0

S21

S21
S

S41
X2
OUT

S23

Driving the separating
of steps

S0
S

S1

Using OUT S42

S23
S

S42

S1
S

RET

S42

S43

Step sequence
initiated by S0

X2

S42
S

Two different step sequence: S0 and S1
S23 returns to initial step S0 by using OUT.
S43 returns to initial step S1 by using OUT.

Step sequence
initiated by S1

S43
S

RET

6. Cautions for Driving Output Point:
See the figure below. After the step point and once LD or LDI instructions are written into the second line, the
bus will not be able to connect directly to the output coil, and errors will occur in the compilation of the ladder
diagram. You have to correct the diagram into the diagram in the right hand side for a correct compilation.
BUS
Sn
S

Y0

Sn
S

Sn
S

Y0

Y0

M0

M0
Y1

Y2

or

Y1

M0
Y2

M1000
Y1

Modifying the
position of M0.

Y2
Normally open
contact in RUN
mode

7. Restrictions on Using Some Instructions:
The program of every step is the same as a general ladder diagram, in which you can use all kinds of
series/parallel circuits or instructions. However, there are restrictions on some of the instructions.
Basic instructions applicable in a step
Instruction

LD/LDI/LDP/LDF
AND/ANI/ANDP/ANDF
OR/ORI/ORP/ORF
INV/OUT/SET/RST

ANB/ORB
MPS/MRD/MPP

MC/MCR

Initial step/general step

Yes

Yes

No

Divergence/

Yes

Yes

No

Yes

No

No

Step

General output

convergence step Step transfer
ƒ DO NOT use MC/MCR instruction in the step.

ƒ DO NOT use STL instruction in a general subroutine or interruption subroutine.
ƒ You can still use CJ instruction in STL instruction, but this will make the actions more complicated. We do not
recommend you do so.

DVP-PLC Application Manual

4-7

4 Step Ladder Instructions
ƒ The position of MPS/MRD/MPP instruction:
Ladder diagram:
LD X0
Sn
S

X0

MPS

X1
Y1
X2

BUS

M0

MRD
X3

Y2
MPP

Instruction code:

Explanation:

STL
LD
MPS
AND
OUT
MRD
AND
OUT
MPP
AND
OUT

MPS/MRD/MPP instruction cannot

Sn
X0

be used directly on the new bus.
You have to execute LD or LDI

X1
Y1

instruction first before applying
MPS/MRD/MPP.

X2
M0
X3
Y2

8. Other Points to Note:
The instruction used for transferring the step (SET S□ or OUT S□) can only be executed after all the relevant
outputs and actions in the current status are completed. See the figure below. The executed results by the PLC are
the same, but if there are many conditions or actions in S10, it is recommended that you modify the diagram in the
left hand side into the diagram in the right hand side. SET S20 is only executed after all relevant outputs and
actions are completed, which is a more explicit sequence.
S10
S

S10
S

Y0
SET

Y0
Y1

S20

SET

Y1
S20
S

Y2

S20
S

S20

Y2

S20
S

X1

S0
RET

Make sure to add RET instruction after STL at the end of
the step ladder diagram.

S20
S

X1

S0
RET

4.4

Things to Note for Designing a Step Ladder Program

1. The first step in the SFC is called the “initial step", S0 ~ S9. Use the initial step as the start of a sequence and end a
complete sequence with RET instruction.
2. If STL instruction is not in use, step S can be a general-purpose auxiliary relay.
3. When STL instruction is in use, the No. of step S cannot be repeated.
4. Types of sequences:

4-8

DVP-PLC Application Manual

4 Step Ladder Instructions
Single sequence: There is only one sequence without alternative divergence, alternative convergence, simultaneous
divergence and simultaneous convergence in a program.
Complicated single sequence: There is only one sequence with alternative divergence, alternative convergence,
simultaneous divergence and simultaneous convergence in a program.
Multiple sequences: There are more than one sequence in a program, maximum 10 sequences, S0 ~ S9.
5. Separation of sequence: Multiple sequences are allowed to be written into the step ladder diagram.
a) See the diagram in the right hand side. There are two

OUT

sequences S0 and S1. The program writes in S0 ~ S30 first
and S1 ~ S43 next.

S0

OUT

S21

S1

S41

b) You can designate a step in the sequence to jump to any step
OUT

in another sequence.

S42

c) When the condition below S21 is true, the sequence will jump
to step S42 in sequence S1, which is called “separating the

S30

S43

step”.
6. Restrictions on diverging sequence: See 4.5 for example
a) You can use maximum 8 diverged steps in a divergence sequence.
b) You can use maximum 16 loops in multiple divergence sequences or in simultaneous sequences combined into
one sequence.
c) You can designate a step in the sequence to jump to any step in another sequence.
7. Reset of the step and the inhibiting output:
a) Use ZRST instruction to reset a step to be Off.
b) Make M1034 = On to inhibit output Y.
8. Latched step:
The On/Off status of the latched step will be memorized when the power of the PLC is switched off. When the
PLC is re-powered, the status before the power-off will be recovered and the execution will resume. Please be
aware of the area for the latched steps.
9. Special auxiliary relays and special registers: See 4.6refer to chapter 4.6 IST instruction for more details.
Device No.

Function

M1040

Disabling step. Disabling all the shifting of steps when On.

M1041

Starting step. Flag for IST instruction.

M1042

Enabling pulses. Flag for IST instruction.

M1043

Zero return completed. Flag for IST instruction.

M1044

Zero point condition. Flag for IST instruction.

M1045

Disabling all output reset. Flag for IST instruction.

DVP-PLC Application Manual

4-9

4 Step Ladder Instructions
Device No.

4.5

Function

M1046

Setting STL status as On. On when any of the steps is On.

M1047

Enabling STL monitoring

D1040

On status of step No. 1

D1041

On status of step No. 2

D1042

On status of step No. 3

D1043

On status of step No. 4

D1044

On status of step No. 5

D1045

On status of step No. 6

D1046

On status of step No. 7

D1047

On status of step No. 8

Types of Sequences

Single Sequence: The basic type of sequences
The first step in a step ladder diagram is called the initial step, which can be S0 ~ S9. The steps following the
initial step are general steps, which can be S10 ~ S1023. If you are using IST instruction, S10 ~ S19 will become the
steps for zero return.
a) Single sequence without divergence and convergence
After a sequence is completed, the control power on the steps will be given to the initial step.
Step ladder diagram

SFC:

M1002

S0
S

ZRST

S0

SET

S0

SET

S20

X0

S20
S

S127

M1002
S0
X0
S20

Y0
SET

S30

S30

S30
S

Y1
SET

S40

Y2

S50
S

S50

S50

S60

X4

SET

Y2

Y3

X4

Y3

S60
S

S40
X3

X3

SET

Y1

X2

X2
S40
S

Y0

X1

X1

S60

Y4

X5

Y4
X5

S0

S0

RET
END

4-10

DVP-PLC Application Manual

4 Step Ladder Instructions
b) Jumping Sequence
1. The control power over the step is transferred to
a certain step on top.
OUT

2. The control power over the step is transferred to
the step in another sequence.

S0

S21

OUT

S0

OUT

S1

OUT

S21

S41
OUT

S42

S42

S41

S43

S43

c) Reset Sequence
See the diagram in the right hand side. When the condition at S50
S0

is true, S50 will be reset and the sequence will be completed at
this time.

S21

RST

S50

Complicated Single Sequence:
Including simultaneous divergence, alternative divergence, simultaneous convergence and alternative
convergence.

DVP-PLC Application Manual

4-11

4 Step Ladder Instructions
a) Structure of simultaneous divergence
When the condition at the current step is true, the step can be transferred to many steps. See the diagrams
below. When X0 = On, S20 will be simultaneously transferred to S21, S22, S23 and S24.
Ladder diagram:
S20
S

SFC:

X0

SET

S21
S20

SET

S22

SET

S23
S21

SET

S22

S23

S24

S24

b) Structure of alternative divergence
When the individual condition at the current status is true, the step will be transferred to another individual step.
See the diagrams below. When X0 = On, S20 will be transferred to S30; when X1 = On, S20 will be transferred to
S31; when X2 = On, S20 will be transferred to S32.
Ladder diagram:
S20
S

SFC:

X0

SET

S30

SET

S31

SET

S32

S20

X1

X0

S30

X2

X1

S31

X2

S32

c) Structure of the simultaneous convergence
See the ladder diagram below. A continuous STL instruction represents a simultaneous convergence. When the
condition is true after a continuous output, the step will be transferred to the next step. In the simultaneous
convergence, only when several conditions are true will the transfer be allowed.
Ladder diagram:
S40
S

S41
S

SFC:
S42
S

X2

SET

S50
S40

S41

S42

X2

S50

d) Structure of alternative convergence
See the diagrams below. Depending on the condition of the input signal of which of S30, S40 and S50 becomes
true first, the first one will be first transferred to S60.

4-12

DVP-PLC Application Manual

4 Step Ladder Instructions
Ladder diagram:
S30
S

X0

S40
S

X1

S50
S

X2

SFC:
SET

S60

SET

S60

SET

S60

S30
X0

S40
X1

S50
X2

S60

Examples of alternative divergence & alternative convergence:
Ladder diagram:

SFC:

M1002

S1
S

ZRST

S0

SET

S1

SET

S20

S127

M1002
S1
X0

X0

S20
S

S20

Y0

Y0
X1

X1

SET

S30

SET

S31

SET

S32

S30

X4

X2

X7
S30
S

X4
Y1

X7

S31

Y3

X5

S40

Y2

X3

S32

Y5

X10

S41

Y4

X6

S42

Y6

X11

Y1
S50

X2

SET
S40
S

S40

T1

K10

T1
S60

Y2
X3

Y7

X12

SET
S31
S

TMR

S50
S1

Y3
X5

SET
S41
S

S41

Y4
X6

SET
S32
S

S50

Y5
X10

SET
S42
S

S42

Y6
X11

S50
S

SET

S50

TMR

T1

SET

S60

K10

T1
S60
S

Y7
X12

S1
RET
END

DVP-PLC Application Manual

4-13

4 Step Ladder Instructions
Examples of simultaneous divergence & simultaneous convergence:
SFC:

Ladder diagram:
M1002

ZRST

S0

SET

S3

SET

S20

S127

M1002
S3

S3
S

X0

X0

S20

Y0

X1

S20
S

Y0
S30

X1

SET

S30

SET

S31

SET

S32

S40

Y3

S32

Y5

S42

Y6

X4

Y2

S41

TMR

T1

Y4

X5

Y1

K10

T1

X2

SET

S31
X3

X2

S50

S30
S

Y1

S60

S40

Y7

X6

S40
S

Y2

S31
S

Y3

S3

X3

SET
S41
S

S41

Y4

S32
S

Y5
X4

SET
S42
S
S40
S

S42

Y6
S41
S

S50
S

S42
S

X5

SET

S50

TMR

T1

K10

SET

S60

T1
S60
S

Y7
X6

S3
RET
END

4-14

DVP-PLC Application Manual

4 Step Ladder Instructions
Example of the simultaneous divergence & alternative convergence:
SFC:

Ladder diagram:
M1002

S4
S

ZRST

S0

SET

S4

SET

S20

S127

S4
X0

X0

S20
S

M1002

S20

Y0

X1

Y0
S30

X1

SET

S30

SET

S31

SET

S32

Y1

X2
Y2

S40
S

Y5

Y4

S42

Y6

X7
T1

K10

T1

X2

SET

TMR

S32
X6

S41
X5

S50

Y1

Y3

X4

S40
X3

S30
S

S31

S60

S40

Y7

Y2
S4

X3

SET
S31
S

S50

Y3
X4

SET
S41
S

S41

Y4
X5

SET
S32
S

S50

Y5
X6

SET
S42
S

S42

Y6
X7

S50
S

SET

S50

TMR

T1

SET

S60

K10

T1
S60
S

Y7
X6

S4
RET
END

DVP-PLC Application Manual

4-15

4 Step Ladder Instructions
Combination Example 1:
(Including alternative divergence/convergence and simultaneous divergence/convergence)
Ladder diagram:
S51
S

M1002

ZRST

S0

S127

Y10
X12

SET
S0
S

SET

S0
S61
S
S60
S

Y0
X0

SET
S20
S

S20

Y14
S61 X15
S

S70
S

Y1

S61

SET

S70

Y17
X17

X1

SET

S0

S30
S32
S

X2

SET

S31

Y4
X6

X3

SET
S30
S

SET

S32
S41
S

Y2

S41

Y6
X10

X4

SET
S31
S

S40

Y3

S52
S

X5

SET
S40
S

S40

SET

S53

Y11
SET

S62
S
S63
S

X7

SET

S50

SET

S51

Y15
Y12
SET

S63
S
S62
S

X11

SET

S62

X14

Y7

S60
S

S52

X13

Y5

S50
S

SET

S60

Y13

S63

Y16
S63 X16
S

S0
RET
END

SFC:
M1002
S0

Y0

S20

Y1

X0

X1

X2

S30

Y2

S31

X3
Y3

X5

X4
S40

S32

Y4

X6

Y5

S41

X7

Y6

X10

S50

Y7

X11

S51

Y10

X12

S60

Y13

X15
S70

S61

S52

Y11

X13
Y14

S53

Y12

X14

S62

Y15

S63

Y16

X16
Y17

S0

X17
S0

4-16

DVP-PLC Application Manual

4 Step Ladder Instructions
Combination Example 2:
(Including alternative divergence/convergence and simultaneous divergence/convergence)
Ladder diagram:

SFC:

M1002

S0
S

M1002

ZRST

S0

SET

S0

SET

S30

X0

S30
S

S127

S0
X0
S30

Y0

X1

X1

Y0
S31

X1

SET

S31

SET

S32

S32

Y1

X2

Y2

X3

X1
S31
S

S33

Y3

X4

Y1
X2

SET
S32
S

S33

S34

Y4

X5

Y2
SET

Y6

S37

Y7

X6

S35

X3

S36

Y5

S33
X7

S33
S

Y3
S0

X4

S34
S

SET

S34

SET

S36

Y4
X5

SET
S35
S

S35

Y5

S36
S

Y6
X6

SET
S37
S
S35
S

S37

Y7
S37
S

X7

S0
RET
END

DVP-PLC Application Manual

4-17

4 Step Ladder Instructions
Restrictions on Divergence Sequence:
1. You can use maximum 8 divergence steps in a divergence sequence. As the diagram below, there are maximum
8 diverged steps S30 ~ S37 after step S20.
2. You can use maximum 16 loops in multiple divergence sequences or in simultaneous sequences combined into
one sequence. As the diagram below, there are 4 steps diverged after S40, 7 steps diverged after S41, and 5
steps diverged after S42. There are maximum 16 loops in this sequence.
3. You can designate a step in the sequence to jump to any step in another sequence.
M1002
S0
X0
S20

Y0
X2

X1
Y1

S30
X11

X12

S40

X4

X3
Y2

S31

X6
Y5

S34
X15

Y14

X32

S51

S70

Y32

S71

Y10

S37

Y7

X17

RST

S42

S36

Y13

X25
Y16

S52
X34

Y33

S72

X22

OUT
S53
S20

Y17

S54

Y20

X35

Y34

S55

X23
Y21

S56

Y22

S57

Y23

X24
OUT S58
Y24
S20
X37
RST

X36
Y35

S73
X44

S74

X45

S80

X10

S36
X16

Y12

S41

S0

Y15

X33

X7
Y6

X15

X21

S50

S35

SET

OUT
S20

Y11

X20

X15

X14

X13

X5
Y4

S32

Y3

S32

S81
SET

X27
Y26

S61

X30
Y27

X31

S62

Y30

S63

Y31

X42
X43

Y37

S76

X47

X46

S60
X41

X40
S75

S58
Y36

SET

Y40

X50

S0

Y41

X51

X26
Y25

S59

OUT
S42

Y42

X52

S0

SET
S0

4.6

IST Instruction

API

Mnemonic

60

IST
Type

OP
S
D1
D2

Initial State
Bit Devices

X
*

Function

Operands

Y
*

M
*

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

D

E

F IST: 7 steps

*
*
PULSE

16-bit

ES EX SS SA SX SC EH2 SV EH3 SV2 ES EX SS SA SX SC EH2 SV EH3 SV2 ES

32-bit
EX SS SA SX SC EH2 SV EH3 SV2

Operands:
S: Start device in the designated operation mode

D1: The smallest No. of designated step in auto mode

D2: The biggest No. of designated step in auto mode
Explanations:
1. S will occupy 8 consecutive points.
2. Range of D1 and D2: for SA/SX/SC/EH2/SV/EH3/SV2 S20 ~ S899; for ES/EX/SS S20 ~ S127; D2 > D1.
3. See the specifications of each model for their range of use.
4. IST instruction can only be used once in the program.
5. Flags: M1040 ~ M1047. See remarks for more details.
6. IST instruction is a handy instruction specifically for the initial status of step ladder control procedure to

4-18

DVP-PLC Application Manual

4 Step Ladder Instructions
accommodate special auxiliary relay.

Program Example 1:
1. Use of IST instruction
M1000
IST

S

X10

S20

S60

X10: Individual operation
X11: Zero return
X12: Step operation
X13: One cycle operation

X14: Continuous operation
X15: Zero return enabled switch
X16: Start switch
X17: Stop switch

2. When IST instruction is being executed, the following special auxiliary relays will switch automatically.
M1040: Operation forbidden
M1041: Operation starts
M1042: Pulse output enabled
M1047: STL monitor enabled

S0: Initiates manual operation
S1: Initiates zero return
S2: Initiates auto operation

3. S10 ~ S19 are for zero return and cannot be used as general steps. When S0 ~ S9 are in use, S0 ~ S2 represent
manual operation mode, zero return mode and auto operation mode. Therefore, in the program, you have to write
the circuit of the three steps in advance.
4. When switched to S1 (zero return) mode, any On in S10 ~ S19 will result in no zero return.
5. When switched to S2 (auto operation) mode, any On of the S in D1 ~ D2 or M1043 = On will result in no auto
operation.
Program Example 2:
1. Robot arm control (by IST instruction):
a) Motion request: Separate the big ball and small ball and move them to different boxes. Configure the control
panel for the control.
b) Motions of the robot arm: descending, clipping ball, ascending, right shifting, releasing ball, ascending, left
shifting.
c) I/O devices:
Left-limit X1
Upper-limit X4

Y0

Y3

Right-limit X2
(big)

Right-limit X3
(small)

Y2
Y1

Lower-limit X5
Ball size
sensor X0

Big

Small

2. Operation modes:
Manual operation: Turn On/Off of the load by a single button.
Zero return: Press the zero return button to automatically zero-return the machine.
Auto operation:
a) Single step operation: Press “auto start” button for every one step forward.
b) One cycle operation: Press “auto start” button at the zero point. After a cycle of auto operation, the operation
will stops at the zero point. Press “auto stop” button in the middle of the operation to stop the operation and
press “auto start” to restart the operation. The operation will resume until it meets the zero point.

DVP-PLC Application Manual

4-19

4 Step Ladder Instructions
c) Continuous operation: Press “auto start” button at the zero point to resume the operation. Press “auto stop” to
operate until it meets the zero point.
3. The control panel:
Start Power

Start Zero Return X15

Stop Power
Clip
Ball

Ascend

Right
Shift

X20

X22

X24

Release
Ball
Descend

X21

X23

Auto Start X16
Auto Stop X17

Step X12
Zero Return X11

One cycle
Operation X13

Left
Shift
Manual
Operation X10

X25

Continuous
Operation X14

a) Ball size sensor X0.
b) Robot arm: left limit X1, big ball right limit X2, small ball right limit X3, upper limit X4, lower limit X5.
c) Robot arm: ascending Y0, descending Y1, right shifting Y2, left shifting Y3, clipping Y4.
Start Circuit
X0

X1 Y4
M1044

M1000
IST

X10

S20

S80

Manual Operation Mode
S0
S

X20

SET

Y4

Clipping tightly

RST

Y4

Clipping released

X21
X22 Y1

Y0

Ascending

Y1

Descending

Y2

Right shifting

Y3

Left shifting

Interlocked

X23 Y0
X24 X4 Y3
X25 X4 Y2

Interlocked
Robot arm ascends to upper limit (X4 On)

Zero Return Mode
SFC:

4-20

DVP-PLC Application Manual

4 Step Ladder Instructions
S1
X15
S10

RST

Y4

Clipping released

RST

Y1

Descending stops
Robot arm ascends to upper limit (X4 On)

Y0

X4

RST

S11

Y2

Y3

X1
S12

Right shifting stops
Robot arm left shifting to left limit (X1 On)

SET

M1043

Enable zero return completed flag

RST

S12

Zero return operation completed

SET

S10

Enter zero return mode

RST

Y4

Clipping released

RST

Y1

Descending stops

Ladder Diagram:
S1 X15
S
S10
S

Y0

Robot arm ascends to upper limit (X4 On)

X4
S11
S

SET

S11

RST

Y2

Y3

Right shifting stops
Robot arm left shifting to left limit (X1 On)

X1
S12
S

SET

S12

SET

M1043

RST

S12

Enable zero return completed flag
Zero return operation completed

Auto Operation Modes
SFC:

DVP-PLC Application Manual

4-21

4 Step Ladder Instructions
S2
M1041
M1044
S20

Y1

X5
X0

X5
X0

S30

T0

Y4

TMR

T0

S40
K30
T1

X4

S31
X4

SET

X4

X2

S32

S42

Y2

X2

Y4

TMR

T1

K30

X4

S41

Y0

SET

Y0
X3
Y2

X3
X5

S50

Y1

X5
S60

T2

S80

Y4

TMR

T2

K30

X4
Y0

S70
X4

RST

X1
Y3

X1
S2

4-22

DVP-PLC Application Manual

4 Step Ladder Instructions
Ladder Diagram:
S2 M1041 M1044
S
S20
S

SET

S20

Y1

Enter auto operation mode
Robot arm descending

X5 X0

SET

S30

SET

S40

SET

Y4

Clipping tightly

TMR

T0

K30

SET

S31

X5 X0
S30
S

T0
S31
S

X4

Y0

Robot arm ascending to upper limit (X4 On)

X4

SET
S32
S

S32

X2
Right shifting

Y2
X2

S40
S

SET

S50

SET

Y4

Clipping tightly

TMR

T1

K30

SET

S41

T1
S41
S

X4
Robot arm ascending to upper limit (X4 On)

Y0
X4

SET
S42
S

S42

X3

Y2

Right shifting

X3

SET
S50
S

S50

X5

Y1

Robot arm descending

X5
S60
S

SET

S60

RST

Y4

Clipping released

TMR

T2

K30

SET

S70

T2
S70
S

X4

Y0

Robot arm ascending to upper limit (X4 On)

X4

SET
S80
S

S80

X1

Y3

Robot arm left shifting to left limit (X1 On)

X1

S2
RET
END

DVP-PLC Application Manual

4-23

4 Step Ladder Instructions
MEMO

4-24

DVP-PLC Application Manual

5 Categories & Use of Application Instructions
5.1 List of Instructions
For applicable models, ES includes ES/EX/SS; SA includes SA/SX/SC; EH includes EH2/SV/EH3/SV2.
ES/EX/SS series MPU does not support pulse execution type instructions (P instruction).

Rotation & Displacement

Four Arithmetic Operation

Transmission Comparison

Loop Control

Category

API

Mnemonic
16-bit

32-bit

P
instruction

Function

3
3

Conditional Jump
Subroutine Return

-

-

FEND

-

-

07

WDT

-

3

08

FOR

-

09

NEXT

10

CMP

DCMP

11

ZCP

DZCP

12

MOV

DMOV

13

SMOV

14

CML

15

BMOV

16

FMOV

DFMOV

17

XCH

DXCH

18

BCD

DBCD

19

BIN

DBIN

20

ADD

DADD

21

SUB

DSUB

22

MUL

DMUL

23

DIV

DDIV

24

INC

DINC

25

DEC

DDEC

26

WAND

DAND

27

WOR

DOR

28

WXOR

DXOR

29

NEG

DNEG

30

ROR

DROR

31

ROL

DROL

32

RCR

DRCR

33

RCL

DRCL

34

SFTR

35

SFTL

36

WSFR

37

WSFL

38

SFWR

-

39

SFRD

-

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

00

CJ

-

01

CALL

-

02

SRET

-

03

IRET

-

04

EI

-

05

DI

06

-

DCML
-

DVP-PLC Application Manual

Call Subroutine
Interrupt Return
Enable Interrupts
Disable Interrupts
The End of The Main Program
(First End)
Watchdog Timer Refresh
Start of a FOR-NEXT loop
End of a FOR-NEXT loop
Compare
Zone Compare
Move
Shift Move
Compliment
Block Move
Fill Move
Exchange
Binary Coded Decimal
Binary
Addition
Subtraction
Multiplication
Division
Increment
Decrement
Logical Word AND
Logical Word OR
Logical Exclusive OR
2’s Complement (Negative)
Rotation Right
Rotation Left
Rotation Right with Carry
Rotation Left with Carry
Bit Shift Right
Bit Shift Left
Word Shift Right
Word Shift Left
Shift Register Write
Shift Register Read

Applicable to

STEPS

Page

ES

SA EH2 EH3 16-bit 32-bit

3
3
3
3
3
3

3
3
3
3
3
3

3
3
3
3
3
3

3

-

6-1

3

-

6-5

1

-

6-5

1

-

6-8

1

-

6-8

1

-

6-8

3

3 3

1

-

6-13

3
3
3
3
3
3

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

1

-

6-15

3

-

6-16

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
-

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

1

-

6-16

7

13

6-19

9

17

6-20

5

9

6-21

11

-

6-22

5

6-24

7

9
–

7

13

6-28

5

9

6-29

5

9

6-31

6-26

5

9

6-32

7

13

6-34

7

13

6-36

7

13

6-37

7

13

6-39

3

5

6-41

3

5

6-42

7

13

6-43

7

13

6-44

7

13

6-45

3

5

6-46

5

9

6-48

5

9

6-49

5

9

6-50

5

9

6-51

9

6-52

7

-

7

-

6-58

9
9
9

6-53
6-54
6-56
6-57

5-1

5 Categories & Use of Application Instructions

Serial I/O

Display of External
Settings

Handy Instructions

High Speed Processing

Data Processing

Category

5-2

API

Mnemonic
16-bit

32-bit

P
instruction

Applicable to

STEPS

ES

SA EH2 EH3 16-bit 32-bit

3
3
3
3
3
3

3
3
3
3
3

Timed Annunciator Set

-

Input Matrix

-

Pulse Width Modulation

-

Pulse Ramp

-

Initial State

3
3
3
3
3

DSER

3

Search a Data Stack

-

DABSD

-

Absolute Drum Sequencer

-

-

-

Incremental Drum Sequencer

-

TTMR

-

-

Teaching Timer

-

65

STMR

-

-

Special Timer

66

ALT

-

3

Alternate State

3

67

RAMP

-

Ramp Variable Value

68

DTM

-

-

Data Transform and Move

-

69

SORT

-

-

Sort Tabulated Data

-

70

TKY

DTKY

-

Ten Key Input

-

71

HKY

DHKY

-

Hexadecimal Key Input

-

72

DSW

-

-

Digital Switch

73

SEGD

-

3

Seven Segment Decoder

74

SEGL

-

-

Seven Segment with Latch

3
3

75

ARWS

-

-

Arrow Switch

-

76

ASC

-

-

ASCII Code Conversion

-

77

PR

-

-

-

78

FROM

DFROM

3

3

3 3

9

17

7-88

79

TO

DTO

3

3

3 3

9

17

7-89

80

RS

-

-

3

3 3

9

-

7-93

81

PRUN

Print (ASCII Code Output)
Read CR Data in Special
Modules
Write CR Data into Special
Modules
Serial Communication
Instruction
Parallel Run

9

7-106

ASCI

-

7

-

7-107

83

HEX

-

3 3
3 3
3 3

5

82

3
3

7

-

7-112

ZRST

-

41

DECO

-

42

ENCO

-

43

SUM

DSUM

44

BON

DBON

45

MEAN

DMEAN

46

ANS

-

47

ANR

-

48

SQR

DSQR

49

FLT

DFLT

50

REF

-

51

REFF

-

52

MTR

-

53

-

DHSCS

54

-

DHSCR

55

-

DHSZ

56

SPD

-

57

PLSY

58

PWM

59

PLSR

60

IST

61

SER

62

ABSD

63

INCD

64

DPLSY
DPLSR
-

DPRUN

3
3
3

Zero Reset
Decode
Encode
Sum of Active Bits
Check Specified Bit Status
Mean
Annunciator Reset
Square Root
Floating Point
Refresh
Refresh and Filter Adjust
High Speed Counter Set
High Speed Counter Reset
High Speed Zone Compare
Speed Detection
Pulse Y Output

Converts Hex to ASCII
Converts ASCII to Hex

3
3
3
3
3

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

Page

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

40

3
3
3
3
3
3

Function

5

-

6-59

7

-

6-61

7

-

6-63

5

9

6-65

7

13

6-66

7

13

6-67

7

-

6-68

1

-

6-68

5

9

6-71

5

9

6-72

5

-

7-1

3

-

7-2

9

-

7-3

-

13

7-5

-

13

7-15

-

17

7-17

7

-

7-24

7

13

7-26

7

-

7-33

9

17

7-36

7

-

7-41

9

17

7-48

9

17

9

-

7-50
7-52

5

-

7-54

7

-

7-56

3

-

7-58

9

7-59

9

-

11

-

7-69

7

13

7-71

9

17

7-73

9

-

7-76

5

-

7-78

7

-

7-79

9

-

7-82

11

-

7-84

5

-

7-86

7-61

DVP-PLC Application Manual

5 Categories & Use of Application Instructions

Communication

Basic Instructions

Category

API

Mnemonic
16-bit

32-bit

Function

Applicable to
ES

Check Code

-

Volume Read

-

Volume Scale

-

Absolute Value

CCD

85

VRRD

-

86

VRSC

-

87

ABS

DABS

3
3
3
3

88

PID

DPID

-

PID Control Loop

89

PLS

-

-

90

LDP

-

-

91

LDF

-

-

Rising-edge Output
Rising-edge Detection
Operation
Falling-edge Detection
Operation

92

ANDP

-

-

93

ANDF

-

-

94

ORP

-

-

95

ORF

-

-

96

TMR

-

-

Rising-edge Parallel
Connection
Falling-edge Parallel
Connection
16-bit Timer

97

CNT

-

16-bit / 32-bit Counter

98

INV

-

-

Inverting Operation

99

PLF

-

-

Falling-edge Output

100 MODRD

-

-

Read Modbus Data

101 MODWR

-

-

Write Modbus Data

102 FWD

-

-

Forward Running of VFD-A

103 REV

-

-

Reverse Running of VFD-A

104 STOP

-

-

Stop VFD-A

105 RDST

-

-

Read VFD-A Status

106 RSTEF

-

-

Reset Abnormal VFD-A

107 LRC

-

Checksum LRC Mode

108 CRC

-

3
3

150 MODRW

-

-

Read/Write Modbus Data

-

ASDA servo drive R/W

-

-

-

Floating Point Compare
Move Floating Point Data

3
3
3

Angle

Radian

-

Angle

-

3
3
3
3
3
3

3
3
3
3
3
3
3
3
3
3
3

3
3
3
3
3
3
3
3
3
3
3

3

-

DCNT

-

110

-

DECMP

111

-

DEZCP

112

-

DMOVR

116

-

DRAD

117

-

DDEG

118

-

DEBCD

119

-

DEBIN

120

-

DEADD

121

-

DESUB

122

-

DEMUL

123

-

DEDIV

3
3
3
3
3
3
3
3
3
3
3

124

-

DEXP

3

125

-

DLN

3

126

-

DLOG

3

127

-

DESQR

3

DVP-PLC Application Manual

STEPS

Page

SA EH2 EH3 16-bit 32-bit

84

206 ASDRW

Floating Point Operation

P
instruction

3
3
3
3
3
3

7

3
3
3

3
3
3
3
3
3

3

-

7-115

5

-

7-117

5

-

7-119

3

5

7-120

9

17

7-121

3

-

3-14

3 3

3

-

3-12

3

3 3

3

-

3-13

Rising-edge Series Connection

3

3 3

3

-

3-13

Falling-edge Series Connection

3

3 3

3

-

3-13

3

3 3

3

-

3-14

3

3 3

3

-

3-14

3
3
3
3
3
3
3
3
3
3
3
3
3

3
3
3
3
3
3
3
3
3
3
3
3
3

4

-

3-9

4

6

3-10

1

-

3-16

3

-

3-15

7

-

8-1

7

-

8-5

7

-

8-10

7

-

8-10

7

-

8-10

5

-

8-13

5

-

8-15

7

-

8-16

7

-

8-18

11

-

9-1

7

-

10-9

-

13

8-21

-

17

8-22

Checksum CRC Mode

Floating Point Zone Compare

Radian

Float to Scientific Conversion
Scientific to Float Conversion
Floating Point Addition
Floating Point Subtraction
Floating Point Multiplication
Floating Point Division
Exponent of Binary Floating
Point
Natural Logarithm of Binary
Floating Point
Logarithm of Binary Floating
Point
Floating Point Square Root

3
3
3
3
3
3
3
3
3
3
3
3
3

-

9

8-23

-

9

8-24

-

9

8-25

-

9

8-26

-

9

8-27

-

13

8-29

-

13

8-30

-

13

8-31

-

13

8-32

3 3

-

9

8-33

3

3 3

-

9

8-34

3

3 3

-

13

8-35

3

3 3

-

9

8-36

5-3

5 Categories & Use of Application Instructions
Category

API

Mnemonic
16-bit

-

DPOW

130

-

DSIN

131

-

DCOS

132

-

DTAN

133

-

DASIN

134

-

DACOS

128

Floating Point Operation

129 INT

135

DINT

-

DSINH

137

-

DCOSH

138

-

DTANH

172

-

DADDR

173

-

DSUBR

174

-

DMULR

175

-

DDIVR

Others

P
instruction

3
3
3
3
3
3
3
3
3
3
3

3

Function

Floating Point Power Operation
Float to Integer
Sine
Cosine
Tangent
Arc Sine

Applicable to

STEPS

ES

SA EH2 EH3 16-bit 32-bit

3
3
3
3
3

3
3
3
3
3
3
3
3

-

Arc Cosine

-

Arc Tangent

-

Hyperbolic Sine

-

Hyperbolic Cosine

-

Hyperbolic Tangent

-

Addition of Floating-point
Numbers
Subtraction of Floating-point
Numbers
Multiplication of Floating-point
Numbers
Division of Floating-point
Numbers
Read Digital Switch

-

-

3
3
3
3
3
3
3
3
3
3
3

3
3
3

-

13

Page

8-37

5

9

8-38

-

9

8-39

-

9

8-41

-

9

8-43

-

9

8-45

-

9

8-46

-

9

8-47

-

9

8-48

-

9

8-49

-

9

8-50

-

13

9-67

-

13

9-69

-

13

9-71

-

13

9-73

3

-

8-20

3

-

8-51

7

-

8-53

9

-

8-54

7

-

8-59

3

5

8-63

7

13

8-64

13

8-66

-

9-19

-

Valve Control
Byte Swap

DMEMR

3
3

3

Read File Register

-

3
3
3
3
- 3
3 3
3 3

DMEMW

3

Write File Register

-

3 3

151 PWD

-

-

-

-

3

152 RTMU

-

-

-

-

3

5

-

9-20

153 RTMD

-

-

-

-

3

3

-

9-21

154 RAND

-

3

-

3 3

DMVM
DSPA
DWSUM
-

-

–

7
7
5
5
7
3

-

MVM
MMOV
GPS
SPA
WSUM
196 HST
202 SCAL

Detection of Input Pulse Width
Start of the Measurement of
Execution Time of I Interruption
End of the Measurement of the
Execution Time of I Interruption
Random Number
Move the Designated Bit
Magnify Move
GPS data receiving
Solar Panel Positioning
Get the Sum
High Speed Timer
Proportional Value Calculation
Parameter Proportional Value
Calculation
Compare table
Catch speed and proportional
output
Read the Absolute Position
from a Servo Motor
Zero Return
Adjustable Speed Pulse Output
Drive to Increment
Drive to Absolute

7
5

9-23
9-62
9-75
9-76
9-79
9-81
9-117

109 SWRD

-

143 DELAY

-

Delay Instruction

-

144 GPWM

-

-

General PWM Output

-

145 FTC

-

-

Fuzzy Temperature Control

-

147 SWAP

DSWAP

148 MEMR
149 MEMW

168
176
177
178
179

203 SCLP

-

205 CMPT

-

207 CSFO

-

155

Position
Control

DATAN

136

146 CVM

5-4

32-bit

156
157
158
159

ZRN
PLSV
DRVI
DRVA

3
-

3
3
3

-

DABSR

-

DZRN
DPLSV
DDRVI
DDRVA

-

-

-

-

3

9

13
9
13
-

9

-

9

-

10-7

10-1
10-3

-

-

-

-

-

7

-

10-11

-

3 3

13

9-24

-

-

7
9
7
9
9

17
13
17
17

9-29
9-34
9-35
9-42

-

-

3
3
3
3

DVP-PLC Application Manual

5 Categories & Use of Application Instructions

Gray
code

Real Time
Calendar

Position Control

Category

API

Mnemonic
16-bit

32-bit

Matrix
Contact Type Logic
Operation

Function

DHOUR

3
3
3
3
3
3
-

2-Axis Relative Point to Point
Motion
2-Axis Absolute Point to Point
Motion
2-Axis Relative Position Arc
Interpolation
2-Axis Absolute Position Arc
Interpolation
Single-Axis Pulse Output by
Table
Close Loop Position Control
Variable Speed Pulse Output
Immediately Change Frequency
Time Compare
Time Zone Compare
Time Addition
Time Subtraction
Time Read
Time Write
Hour Meter

170 GRY

DGRY

3

BIN

171 GBIN

DGBIN

3

Gray Code

3
3
3
3
3
3
3
3
3
3
3

191

-

DPPMR

-

192

-

DPPMA

-

193

-

DCIMR

-

194

-

DCIMA

-

195

-

DPTPO

-

DCLLM
DVSPO
DICF

-

197
198
199
160
161
162
163
166
167
169

TCMP
TZCP
TADD
TSUB
TRD
TWR
HOUR

-

-

180 MAND

Contact Type
Comparison
Instruction

P
instruction

181
182
183
184
185
186
187
188
189
190
215
216
217
218
219
220
221
222
223
224
225
226
228
229
230
232

MOR
MXOR
MXNR
MINV
MCMP
MBRD
MBWR
MBS
MBR
MBC
LD&
LD|
LD^
AND&
AND|
AND^
OR&
OR|
OR^
LD=
LD>
LD<
LD<>
LD<=
LD>=
AND=

DLD&
DLD|
DLD^
DAND&
DAND|
DAND^
DOR&
DOR|
DOR^
DLD=
DLD>
DLD<
DLD<>
DLD<=
DLD>=
DAND=

DVP-PLC Application Manual

-

Applicable to
ES

-

-

17

9-99

-

-

-

17

9-102

-

-

-

17

9-105

-

-

-

17

9-110

-

-

-

13

9-115

-

-

11
9
7
7
3
3
7

17
17
13

13

9-119
9-127
9-131
9-54
9-55
9-56
9-57
9-58
9-60
9-63

5
5

9

9-65

9

9-66

-

9-82

9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9

9-84
9-85
9-86
9-87
9-88
9-90
9-92
9-94
9-96
9-98
10-15
10-15
10-15
10-16
10-16
10-16
10-17
10-17
10-17
10-18
10-18
10-18
10-18
10-18
10-18
10-19

-

3 3

-

3 3

Matrix ‘AND’ Operation

-

3 3

Matrix ‘OR’ Operation
Matrix ‘XOR’ Operation
Matrix ‘XNR’ Operation
Matrix Inverse Operation
Matrix Compare
Read Matrix Bit
Write Matrix Bit
Matrix Bit Displacement
Matrix Bit Rotation
Matrix Bit Status Counting
S1 & S2
S1 | S2
S1 ^ S2
S1 & S2
S1 | S2
S1 ^ S2
S1 & S2
S1 | S2
S1 ^ S2
S1 = S2
S1 > S2
S1 < S2
S1 ≠ S2
S1 ≤ S2
S1 ≥ S2
S1 = S2

-

3
3
3
3
3
3
3
3
3
3

BIN

Page

-

3
3
3
3
3
3
3

Gray Code

STEPS

SA EH2 EH3 16-bit 32-bit

-

3
3
3
3
3
3
3

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

3
3
3
3
3
3
3

3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3

9
9
9
9
7
9
7
7
7
7
7
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5

-

-

5-5

5 Categories & Use of Application Instructions

Floating-point Contact Type Comparison Instruction

Word Device Bit Instruction

Contact Type Comparison
Instruction

Category

5-6

API

Mnemonic
16-bit

32-bit

P
instruction

Function

Applicable to

SA EH2 EH3 16-bit 32-bit

9
9
9
9
9
9
9
9
9
9
9

10-19
10-19
10-19
10-19
10-19
10-20
10-20

-

5

9

10-21

-

-

5

9

10-22

-

-

5

9

10-23

-

-

5

9

10-24

-

-

5

9

10-25

-

-

5

9

10-26

-

-

5

9

10-27

-

-

5

9

10-28

-

-

5

9

10-29

-

-

-

9

10-30

-

S1 > S2
S1 < S2
S1 ≠ S2
S1 ≤ S2
S1 ≥ S2
S1 = S2
S1 > S2
S1 < S2
S1 ≠ S2
S1 ≤ S2
S1 ≥ S2

3
3
3
3
3
3
3
3
3
3
3

3
3
3
3
3
3
3
3
3
3
3

266 BOUT

DBOUT

-

Output Specified Bit of a Word

-

267 BSET

DBSET

-

Set ON Specified Bit of a Word

268 BRST

DBRST

-

269 BLD

DBLD

-

270 BLDI

DBLDI

-

271 BAND

DBAND

-

272 BANI

DBANI

-

273 BOR

DBOR

-

274 BORI

DBORI

-

AND>
AND<
AND<>
AND<=
AND>=
OR=
OR>
OR<
OR<>
OR<=
OR>=

Page

5
5
5
5
5
5
5
5
5
5
5

DAND>
DAND<
DAND<>
DAND<=
DAND>=
DOR=
DOR>
DOR<
DOR<>
DOR<=
DOR>=

233
234
236
237
238
240
241
242
244
245
246

STEPS

ES

3
3
3
3
3
3
3
3
3
3
3

10-20
10-20
10-20
10-20

275

-

FLD=

-

Reset Specified Bit of a Word
Load NO Contact by Specified
Bit
Load NC Contact by Specified
Bit
Connect NO Contact in Series
by Specified Bit
Connect NC Contact in Series
by Specified Bit
Connect NO Contact in Parallel
by Specified Bit
Connect NC Contact in Parallel
by Specified Bit
S1 = S2

276

-

FLD>

-

S1 > S2

-

-

-

9

10-30

277

-

FLD<

-

S1 < S2

-

-

-

9

10-30

278

-

FLD<>

-

S1 ≠ S2

-

-

-

9

10-30

279

-

FLD<=

-

S1 ≦ S2

-

-

-

9

10-30

280

-

FLD>=

-

S1 ≧ S2

-

-

-

9

10-30

281

-

FAND=

-

S1 = S2

-

-

-

9

10-31

282

-

FAND>

-

S1 > S2

-

-

-

9

10-31

283

-

FAND<

-

S1 < S2

-

-

-

9

10-31

284

-

FAND<>

-

S1 ≠ S2

-

-

-

9

10-31

285

-

FAND<=

-

S1 ≦ S2

-

-

-

9

10-31

286

-

FAND>=

-

S1 ≧ S2

-

-

-

9

10-31

287

-

FOR=

-

S1 = S2

-

-

-

9

10-32

288

-

FOR>

-

S1 > S2

-

-

-

9

10-32

289

-

FOR<

-

S1 < S2

-

-

-

9

10-32

290

-

FOR<>

-

S1 ≠ S2

-

-

-

9

10-32

291

-

FOR<=

-

S1 ≦ S2

-

-

-

9

10-32

292

-

FOR>=

-

S1 ≧ S2

-

-

-

9

10-32

DVP-PLC Application Manual

5 Categories & Use of Application Instructions
5.2

Composition of Application Instruction

ƒ An application instruction has two parts: the instruction and operands.
Instruction: The function of the instruction
Operands: Devices for processing the operations of the instruction
The instruction part of an application instruction usually occupies 1 step, and one operand occupies 2 or 4 steps
depending on the instruction is a 16-bit or 32-bit one.
ƒ Format of an application instruction:
2

1
API

Mn emo nic

41

DECO

13
12

4

3

Typ e
OP
S
D
n

P

5

6

Operan ds

F un cti on

S

D

Bi t Devic es

7

Decode

n

Word De vices

Y

M

S

K

H Kn X Kn Y Kn M Kn S T

C

D E F

*

*
*

*
*

*
*

*

*

*

*

*
*

*
*

10

*
*

SA /SX /SC

EH /S V

Prog ram Ste ps

X

11

Co ntrol lers
ES /EX /SS

*
*

PUL SE

DECO, DECOP: 7 steps

8

*
*
16 -b it

32 -b it

ES EX SS SA SX SC EH SV ES EX SS SA SX SC EH SV ES EX SS SA SX SC EH SV

9

API No.
Indication of if there is a 16-bit or 32-bit instruction. If there is a 32-bit instruction, the column will be marked
with “D”.
Mnemonic of the application instruction
Indication of if there is a pulse execution type instruction. If there is a pulse instruction, the column will be
marked with “P”.
Operands
Function of the application instruction
DVP-PLC applicable to the application instruction. ES includes ES/EX/SS, SA includes SA/SX/SC, EH2
includes EH2/SV, and EH3 includes EH3/SV2.
Steps occupied by the 16-bit/32-bit/pulse execution instruction
DVP-PLC applicable to the pulse/16-bit/32-bit instruction
Column marked with * and in grey refers to E, F index register modification is applicable.
Column marked with * is the device applicable for the operand
Device name
Device type
ƒ Input of application instruction:
Some application instructions are only composed of the instruction part (mnemonic), e.g. EI, DI, WDT…. Most
application instructions are composed of the instruction part and many operands.

DVP-PLC Application Manual

5-7

5 Categories & Use of Application Instructions
The application instructions for DVP-PLC are represented as API 00 ~ API 246. Every application instruction
has its own mnemonic. For example, the mnemonic of API 12 is MOV. If you are using the ladder diagram editing
software (WPLSoft) to input API 12 into the program, you only have to enter “MOV”. If you are using the handheld
programming panel (HPP) to input API 12 into the program, you will have to enter the API No. “12”.
Different application instructions designate different operands. Take MOV instruction for example:
X0
K10

MOV
Instruction
mnemonic

D10

Operands

MOV instruction is to move the operand designated in S to the operand designated in D.
S
D

Source operand: If there are more than 1 source operands, they will be represented as S1, S2, ….
Destination operand: If there are more than 1 destination operands, they will be represented as
D1, D2, ….

If the operand can only be constant K/H or a register, it will be represented as m, m1, m2, n, n1, n2, ….
ƒ Length of operand (16-bit instruction or 32-bit instruction)
Depending on the contents in the operand, the length of an operand can be 16-bit or 32-bit. Therefore, a
16-bit instruction is for processing 16-bit operands, and 32-bit instruction is for processing 32-bit operands. The
32-bit instruction is indicated by adding a “D” before the 16-bit instruction.
16-bit MOV instruction
When X0 = On, K10 will be sent to D10.

X0

MOV

K10

D10

32-bit DMOV instruction

When X1 = On, the content in (D11, D10) will be sent

X1

DMOV

D10

D20

to (D21, D20).

ƒ Continuous execution instruction and pulse execution instruction
Continuous execution and pulse execution are the two types of execution for an application instruction. Due to
that the execution time required will be shorter when the instruction is not executer, the pulse execution
instructions are used more to shorten the scan period. Instructions marked with a “P" following the mnemonic are
pulse execution instruction. Some instructions are mostly used as pulse execution type, e.g. INC, DEC, the kind of
displacement instructions.

5-8

DVP-PLC Application Manual

5 Categories & Use of Application Instructions
Pulse execution instruction

When X0 goes from Off to On, MOVP instruction will be

X0

MOVP

D10

D12

Continuous execution instruction

again in the scan period.
In every scan period when X1 = On, MOV instruction will

X1

MOV

executed once and the instruction will not be executed

D10

D12

be executed once.

In the two figures, when X0, X1 = Off, the instruction will not be executed, and the content in operand D will
remain unchanged.
ƒ Designation of operands
1. Bit devices X, Y, M, and S can be combined into word device, storing values and data for operaions in the form
of KnX, KnY, KnM and KnS in an application instruction.
2. Data register D, timer T, counter C and index register E, F are designated by general operands.
3. A data register is usually in 16 bits, i.e. of the length of 1 register D. A designated 32-bit data register refers to
2 consecutive register Ds.
4. If an operand of a 32-bit instruction designates D0, the 32-bit data register composed of (D1, D0) will be
occupied. D1 is the higher 16 bits; D0 is the lower 16 bits. The same rule also apply to timer T, 16-bit timers
and C0 ~ C199.
5. When the 32-bit counters C200 ~ C255 are used as data registers, they can only be designataed by the
operands of 32-bit instructions.
ƒ Format of operand
1. X, Y, M, and S can only On/Off a single point and are defined as bit devices.
2. 16-bit (or 32-bit) devices T, C, D, and registers E, F are defined as word devices.
3. You can place Kn (n = 1 refers to 4 bits. For 16-bit instruction, n = K1 ~ K4; for 32-bit instruction, n = K1 ~ K8)
before bit devices X, Y, M and S to make it a word device for performing word-device operations. For example,
K1M0 refers to 8 bits, M0 ~ M7.

When X0 = On, the contents in M0 ~ M7 will be moved to

X0

MOV

DVP-PLC Application Manual

K2M0

D10

bit0 ~ 7 in D10 and bit8 ~ 15 will be set to “0”.

5-9

5 Categories & Use of Application Instructions
ƒ Data processing of word devices combined from bit devices
16-bit instruction

32-bit instruction

Designated value: K-32,768 ~ K32,767

Designated value: K-2,147,483,648 ~ K2,147,483,647

Values for designated K1 ~ K4

Values for designated K1 ~ K8

K1 (4 bits)

0 ~ 15

K1 (4 bits)

0 ~ 15

K2 (8 bits)

0 ~ 255

K2 (8 bits)

0 ~ 255

K3 (12 bits)

0 ~ 4,095

K3 (12 bits)

0 ~ 4,095

K4 (16 bits)

-32,768 ~ +32,767

K4 (16 bits)

0 ~ 65,535

K5 (20 bits)

0 ~ 1,048,575

K6 (24 bits)

0 ~ 167,772,165

K7 (28 bits)

0 ~ 268,435,455

K8 (32 bits)

-2,147,483,648 ~ +2,147,483,647

ƒ Flags
1. General flags
a) The flags listed below are for indicating the operational result of the application instruction.
M1020: zero flag

M1022: carry flag

M1021: borrow flag

M1029: execution of instruction is completed

All flags will turn On or Off according to the operational result of an instruction. For example, the
execution result of operation instructions ADD/SUB/MUL/DVI will affect the status of M1020 ~ M1022. When
the instruction is not executed, the On/Off status of the flag will be held. The status of the four flags relates to
many instructions. See relevant instructions for more details.
b) Example of M1029
When the contact of DSW (Digital Switch) instruction is On, 4 output points will automatically act in cycle
at the frequency of 0.1 second in order to read the set value of the digital switch. If the contact goes Off
during the execution, the action will be disable. When it is On again, the disabled action will be re-executed. If
you do not wish the action to be disabled, you can take the circuit below as a reference.
X0

SET

M0

When X0 = On, DSW will be enabled.

M0

DSW X10

Y10

D0

K0

When X0 = Off, M0 will be Off only when DSW
completes a cycle and M1029 = On.

M1029

RST

M0

2. Error Operation Flags
Errors occur during the execution of the instruction when the combination of application instructions is
incorrect or the devices designated by the operand exceed their range. Other than errors, the flags listed in
the table below will be On, and error codes will also appear.

5-10

DVP-PLC Application Manual

5 Categories & Use of Application Instructions
Device

Explanation

M1067

When operational errors occur, M1067 will be On. D1067 displays the error code. D1069

D1067

displays the step where the error occurs. Other errors occurring will update the contents in

D1069

D1067 and D1069. M1067 will be Off when the error is eliminated.

M1068
D1068

When operational errors occur, M1068 will be On. D1068 displays the step where the error
occurs. Other errors occurring wil not update the content in D1068. You have to use RST
instruction to reset M1068 to Off; otherwise M1068 will keep being On.

3. Flags for expanding functions
Some application instructions can use some special flags to expand their functions or complete special
functions. For example, the communication instruction RS can use M1161 to switch between 8-bit and 16-bit
transmission mode.
ƒ Times of using instructions
There are limitation on the times of using some instructions in the program. However, you can use index register
modification in the operands to expand the functions of the instruction.
1. Can be used only once in the program:
API 58 PWM (ES series MPU)

API 60 IST (ES/SA/EH2/EH3 series MPU)

API 74 SEGL (ES series MPU)

API 155 DABSR (SC/EH2/EH3 series MPU)

2. Can be used only twice in the program:
API 57 PLSY (ES series MPU)
API 74 SEGL (EH2/EH3 series MPU)

API 59 PLSR (ES series MPU)
API 77 PR (SA/EH2/EH3 series MPU)

3. Can be used only 4 times in the program:
API 169 HOUR (SA series MPU)
4. Can be used only 8 times in the program:
API 64 TTMR (SA series MPU)
5. API 53 DHSCS and API 54 DHSCR together can be used only maximum 4 times in the program (ES series
MPU).
6. API 53 DHSCS, API 54 DHSCR, and API 55 DHSZ together can be used only maximum 6 times in the program
(SA series MPU).
ƒ There is no limitation on the times of using the instructions listed below, but there are limitations on the times of
executing the same instruction at the same time.
1. Instructions which can be executed only once: API 52 MTR (SA/EH2/EH), API 56 SPD (ES/SA/EH2/EH3), API
69 SORT (SA/EH2/EH3), API 70 TKY (SA/EH2/EH3), API 71 HKY (SA/EH2/EH3), API 72 DSW (SA), API 74
SEGL (SA), API 75 ARWS, API 80 RS (ES/SA/EH2/EH3), API 100 MODRD (ES/SA/EH2/EH3), API 101

DVP-PLC Application Manual

5-11

5 Categories & Use of Application Instructions
MODWR (ES/SA/EH2/EH3), API 102 FWD (ES/SA/EH2/EH3), API 103 REV (ES/SA/EH2/EH3), API 104 STOP
(ES/SA/EH2/EH3), API 105 RDST (ES/SA/EH2/EH3), API 106 RSTEF (ES/SA/EH2/EH3), API 150 MODRW
(ES/SA/EH2/EH3), API 151 PWD (EH2/EH3).
2. Instructions which can be executed only twice: API 57 PLSY (EH2/EH3), API 58 PWM (SA/EH2/EH3), API 59
PLSR (SA/EH2/EH3), API 72 DSW (EH2/EH3).
3. Instructions which can be executed only 4 times: API 57 PLSY (EH2/SV/EH3), API 58 PWM (EH2/SV/EH3), API
169 HOUR (EH2/EH3).
4. Instructions which can be executed only 8 times: API 64 TTMR (EH2/EH3).
5. In SA series MPU, there is on limitation on the times of using the high-speed output instructions PLSY, PWM and
PLSR, bit only one high-speed output instruction will be enabled in every scan.
6. In EH2/EH3 series MPU, there is no limitation on the times of using hardware high-speed counter instructions
DHSCS, DHSCR and DHSZ, but when the three instructions are enabled at the same time, DHSCS will occupy 1
memory unit, DHSCR 1 memory unit, and DHSZ 2 memory units. The total memeory units occupied by the three
instructions cannot be more than 8 units. If there are more than 8 memory units occupied, the PLC system will
execute the instruction that is first scanned and enabled and ignore the rest.

5.3

Handling of Numeric Values

ƒ Devices only with On/Off status are called bit devices, e.g. X, Y, M and S. Devices used exclusively for storing
numeric values are called word devices, e.g. T, C, D, E and F. Bit device plus a specific bit device (place a digit
before the bit device in Kn) can be used in the operand of an application instruction in the form of numeric value.
ƒ n = K1 ~ K4 for a 16-bit value; n = K1 ~ K8 for a 32-bit value. For example, K2M0 refers to a 8-bit value composed of
M0 ~ M7.
Valid data
M15

M14

0

1

M13 M12

0

1

M11 M10

0

1

M9

M8

M7

M6

M5

M4

M3

M2

0

1

0

1

0

1

0

1

M1

M0

0
1
Low byte

Transmit to
Reset to 0
D1

0
b15

0

0

b14

b13

0

0

0

0

0

0

1

0

1

0

1

0

1

b12

b11

b10

b9

b8

b7

b6

b5

b4

b3

b2

b1

b0

Equals
Low byte
D1

0

0

0

0

0

0

0

0

0

1

0

1

0

1

0

1

ƒ K1M0, K2M0, and K3M0 are transmitted to 16-bit registers and the vacant high bits will be filled in “0”. The same
rule applied to when K1M0, K2M0, K3M0, K4M0, K5M0, K6M0, and K7M0 are transmitted to 32-bit registers and
the vacant high bits will be filled in “0”.
ƒ In the 16-bit (or 32-bit) operation, if the contents of the operand are designated as bit devices K1 ~ K3 (or K4 ~ K7),
the vacant high bits will be regarded as “0”. Therefore, the operation is a positive-value one.

5-12

DVP-PLC Application Manual

5 Categories & Use of Application Instructions
M0

BIN K2X4

D0

The BCD value composed of X4 ~ X13 will be converted to BIN
value and sent to D0.

ƒ You can choose any No. for bit devices, but please make the 1s digit of X and Y “0”, e.g. X0, X10, X20, …Y0, Y10…,
and the 1s digit of M and S “8’s multiple” (“0” is still the best choice), e.g. M0, M10, M20….
ƒ Designating continuous device No.
Take data register D for example, continuous D refers to D0, D1, D2, D3, D4….
For bit devices with specifically designated digit, continuous No. refers to:
K1X0

K1X4

K1X10

K1X14…

K2Y0

K2Y10

K2Y20

Y2X30…

K3M0

K3M12

K3M24

K3M36…

K4S0

K4S16

K4S32

K4S48…

Please follow the No. in the table and do not skip No. in case confusion may occur. In addition, if you use K4Y0 in
the 32-bit operation, the higher 16 bits will be regarded as “0”. For 32-bit data, please use K8Y0.
The operations in DVP-PLC are conducted in BIN integers. When the integer performs division, e.g. 40 ÷ 3 = 13
and the remainder is 1. When the integer performs square root operations, the decimal point will be left out. Use
decimal point operation instructions to obtain the decimal point.
Application instructions revelant to decimal point:
API 49 (FLT)

API 110 (D ECMP)

API 111 (D EZCP)

API 112 (D MOVR)

API 116 (D RAD)

API 117 (D DEG)

API 118 (D EBCD)

API 119 (D EBIN)

API 120 (D EADD)

API 121 (D ESUB)

API 122 (D EMUL)

API 123 (D EDIV)

API 124 (D EXP)

API 125 (D LN)

API 126 (D LOG)

API 127 (D ESQR)

API 128 (D POW)

API 129 (INT)

API 130 (D SIN)

API 131 (D COS)

API 132 (D TAN)

API 133 (D ASIN)

API 134 (D ACOS)

API 135 (D ATAN)

API 136 (D SINH)

API 137 (D COSH)

API 138 (D TANH)

API 172 (D ADDR)

API 173 (D SUBR)

API 174 (D MULR)

API 175 (D DIVR)

Binary Floating Point
DVP-PLC represents floating points in 32 bits, following the IEEE754 standard:

S
b 31

8 bits

23 bits

exponent

mantissa

b0
Sign bit
0: positive
1: negative

DVP-PLC Application Manual

5-13

5 Categories & Use of Application Instructions
(− 1)S × 2 E − B ×1.M , in which B = 127
Therefore, the range for the 32-bit floating point is ±2-126 ~ ±2+128, i.e. ±1.1755 × 10-38 ~ ±3.4028 × 10+38
Example 1: Representing "23" in 32-bit floating point
Step 1: Convert “23” into a binary value: 23.0 = 10111
Step 2: Normalize the binary value: 10111 = 1.0111 × 24, in which 0111 is mantissa and 4 is exponent
Step 3: Obtain the exponent: ∵ E – B = 4

E – 127 = 4 ∴ E = 131 = 100000112

Step 4: Combine the sign bit, exponent and mantissa into a floating point

0 10000011 011100000000000000000002 = 41B8000016

Example 2: Representing “-23.0” in 32-bit floating point
The steps required are the same as those in Example 1. The only difference is you have to alter the sign bit into “1”.

DVP-PLC uses registers of 2 continuous No. to combine into a 32-bit floating point. For example, we use registers
(D1, D0) for storing a binary floating point as below:
D1(b15~b0)
7

S

2
E7

6

2
E6

5

2
E5

b31 b30 b29 b28

1

2
E1

D0(b15~b0)
0

-1

-2

-3

-17

-18

-19

-20

-21

-22

-23

2
2
2
2
E0 A22 A21 A20

2
A6

2
A5

2
A4

2
A3

2
A2

2
A1

2
A0

b24 b23 b22 b21 b20

b6

b5

b4

b3

b2

b1

b0

23 bits of mantissa

8 bits of exponent

Hidden decimal point
Sign bit (0: positive 1: negative)
When b0~b31 is 0, the content is 0.

Decimal Floating Point
ƒ Since the binary floating point are not very user-friendly, we can convert it into a decimal floating point for use.
Please be noted that the decimal point operation in DVP-PLC is still in binary floating point.
ƒ The decimal floating point is represented by 2 continuous registers. The register of smaller No. is for the constant
while the register of bigger No. is for the exponent.
Example: Storing a decimal floating point in registers (D1, D0)
Decimal floating point = [constant D0] × 10 [exponent D1 ]
Constant D0 = ±1,000 ~ ±9,999

Exponent D1 = -41 ~ +35
The constant 100 does not exist in D0 due to 100 is represented as 1,000 × 10-1. The range of decimal floating point
is ±1175 × 10-41 ~ ±3402×10+35.

5-14

DVP-PLC Application Manual

5 Categories & Use of Application Instructions
ƒ The decimal floating point can be used in the following instructions:
D EBCD: Converting binary floating point to decimal floating point
D EBIN: Converting decimal floating point to binary floating point
ƒ Zero flag (M1020), carry flag (M1021), carry flag (M1022) and the floating point operation instructions:
Zero flag: M1020 = On if the operational result is “0”.
Borrow flag: M1021 = On if the operational result exceeds the minimum unit.
Carry flag: M1022 = On if the absolute value of the operational result exceeds the range of use.

5.4

E, F Index Register Modification
The index registers are 16-it registers. There are 2 points of E, F in ES/EX/SS, 8 points E0 ~ E3 and F0 ~ F3 in

SA/SX/SC, and 16 points E0 ~ E7 and F0 ~ F7 in EH2/SV/EH3 series MPU.
ƒ E and F index registers are 16-bit data registers, can be read and
written.
ƒ If you need a 32-bit register, you have to designate E. In this case, F

16-bit

16-bit
F0

will be covered up by E and cannot be used; otherwise, the contents

E0

in E may become incorrect. (We recommend you use MOVP

32-bit
F0

E0

High byte

Low byte

instruction to reset the contents in D to 0 when the PLC is switched
on.)
ƒ Combination of E and F when you designate a 32-bit index register:
(E0, F0), (E1, F1), (E2, F2), ... (E7, F7)

See the diagram in the left hand side. E, F index register
MOV K20E0 D10F0
E0 = 8

F0 = 14
K28

the contents in E and F.
For example, E0 = 8 and K20E0 represents constant K28 (20

20 + 8 = 28 10 + 14 = 24
Transmission

modification refers to the content in the operand changes with

D24

+ 8). When the condition is true, constant K28 will be
transmitted to register D24.

Devices modifiable in ES/EX/SS series MPU: P, X, Y, M, S, KnX, KnY, KnM, KnS, T, C, D.
Devices modifiable in SA/SX/SC series MPU: P, X, Y, M, S, KnX, KnY, KnM, KnS, T, C, D
Devices modifiable in EH2/SV/EH3 series MPU: P, I, X, Y, M, S, K, H, KnX, KnY, KnM, KnS, T, C, D
E and F can modify the devices listed above but cannot modify themselves and Kn. K4M0E0 is valid and
K0E0M0 is invalid. Grey columns in the table of operand at the beginning page of each application instruction indicate
the operands modifiable by E and F.

DVP-PLC Application Manual

5-15

5 Categories & Use of Application Instructions
If you need to modify device P, I, X, Y, M, S, KnX, KnY, KnM, KnS, T, C and D by E, F, you have to select a
16-bit register, i.e. you can designate E or F. To modify constant K and H in a 32-bit instruction, you have to select a
32-bit register, i.e. you have to designate E.
When you use the instruction mode in WPLSoft to modify constant K and H, you have to use @, e.g.
"MOV K10@E0 D0F0”

5-16

DVP-PLC Application Manual

5 Categories & Use of Application Instructions
5.5

Instruction Index

For applicable models, ES includes ES/EX/SS; SA includes SA/SX/SC; EH2 includes EH2/SV; EH3 includes
EH3/SV2..
ES/EX/SS series MPU does not support pulse execution type instructions (P instruction).
Sorted by alphabetic order & API No.
Mnemonic
Category

A

API

16-bit

32-bit

Page

Absolute Value

EH EH
2
3
3 3 3

7-120

Absolute Drum Sequencer

-

3

3

7-50

ES SA

ABS

DABS

62

ABSD

DABSD

20

ADD

DADD

Addition

3 3

3

6-34

66

ALT

-

Alternate State

3 3

3

7-58

- 3
- 3
- 3

3

10-16

3
3

10-16
10-16

-

218 AND&

DAND&

-

S1 & S2

220 AND^
219 AND|

DAND^
DAND|

-

S1 ^ S2
S1 | S2

234
237
236
232
233
238

AND<
AND<=
AND<>
AND=
AND>
AND>=

DAND<
DAND<=
DAND<>
DAND=
DAND>
DAND>=

-

S1 < S2
S1 ≤ S2
S1 ≠ S2
S1 = S2
S1 > S2
S1 ≥ S2

3
3
3
3
3
3

3
3
3
3
3
3

3
3
3
3
3
3

10-19
10-19
10-19
10-19
10-19
10-19

93

ANDF

-

-

Falling-edge Series Connection

3 3

3

3-13

92

ANDP

-

-

Rising-edge Series Connection

3 3

3

3-13

47

ANR

-

Annunciator Reset

-

3

3

46

ANS

-

-

Timed Annunciator Set

-

3

3

6-68
6-68

75

ARWS

-

-

Arrow Switch

-

3

3

7-82

76

ASC

-

-

ASCII Code Conversion

-

3

3

7-84

3 3

3

7-107

-

10-9

3
3

ASCI

-

206 ASDRW

D

Applicable to
Function

87

82

B

P
Instructio
n

-

Converts Hex to ASCII
-

271 BAND

DBAND

-

272 BANI

DBANI

-

18

BCD

DBCD

ASDA servo drive R/W
- Connect NO Contact in Series by Specified
- Bit
Connect NC Contact in Series by Specified
- Bit
3 3
Binary Coded Decimal

19

10-26
10-27
6-31

BIN

DBIN

Binary

3 3

269 BLD

DBLD

-

Load NO Contact by Specified Bit

-

-

10-24

270 BLDI

DBLDI

-

Load NC Contact by Specified Bit

- 3 3

3

10-25
6-26

3 3

3

6-66

15

BMOV

-

Block Move

44

BON

DBON

273 BOR

DBOR

-

Check Specified Bit Status
Connect NO Contact in Parallel by Specified
Bit
Read the Absolute Position from a Servo
Motor
Arc Cosine

155

-

DABSR

134

-

DACOS

172

-

DADDR

133

-

6-32

10-28

-

-

-

3

3

9-24

-

3

3

8-46

DASIN

Addition of Floating-point Numbers
Arc Sine

-

3

3

9-67
8-45

-

3

3

8-47

3 3

3

8-22

135

-

DATAN

Arc Tangent

111

-

DEZCP

Floating Point Zone Compare

DVP-PLC Application Manual

5-17

5 Categories & Use of Application Instructions
Mnemonic
Category

API

5-18

Applicable to
Function

Page

54

-

DHSCR

-

High Speed Counter Reset

EH EH
2
3
3 3 3

53

-

DHSCS

-

High Speed Counter Set

3 3

3

55

-

DHSZ

-

High Speed Zone Compare

-

3

7-17

16-bit

32-bit

ES SA

3

7-15
7-5

199

-

DICF

Immediately Change Frequency

125

-

DLN

Natural Logarithm of Binary Floating Point

- 3 3

3

9-131
8-34

126

-

DLOG

Logarithm of Binary Floating Point

3 3

3

8-35

112

-

DMOVR

Move Floating Point Data

3 3

3

8-23

174

-

DMULR

Multiplication of Floating-point Numbers

128

-

DPOW

Floating Point Power Operation

3 3

192

-

DPPMA

-

2-Axis Absolute Point to Point Motion

-

-

9-102

191
195

-

DPPMR
DPTPO

-

2-Axis Relative Point to Point Motion
Single-Axis Pulse Output by Table

-

9-99
9-115

116

-

DRAD

Angle

-

3

3

8-24

130

-

DSIN

3 3

3

8-39

136

-

DSINH

Sine
Hyperbolic Sine

-

-

3

8-48

178

-

DSPA

Solar Panel Positioning

-

-

-

9-79

173

-

DSUBR

Subtraction of Floating-point Numbers

132

-

DTAN

3 3

3

8-43

138

-

DTANH

Tangent
Hyperbolic Tangent

-

-

3

8-50

-

DVSPO

-

Variable Speed Pulse Output

-

The End of The Main Program (First End)

- 3 3

3

6-13

198
F

P
Instructio
n

-

-

Radian

9-71
3

8-37

9-69

9-127

06

FEND

49

FLT

DFLT

Floating Point

3 3

3

6-72

16

FMOV

DFMOV

Fill Move

3 3

3

6-28

08

FOR

Start of a FOR-NEXT loop

3 3

3

6-16

78

FROM

Read CR Data in Special Modules

3 3

3

7-88

-

-

DFROM

145 FTC

-

-

Fuzzy Temperature Control

-

3

3

8-54

102 FWD

-

-

Forward Running of VFD-A

3 3

3

8-10

S1 < S2

-

283

-

FAND<

-

285

-

FAND<=

-

S1 ≦ S2

284

-

FAND<>

-

S1 ≠ S2

281

-

FAND=

-

282

-

FAND>

286

-

FAND>=

277

-

279

-

278

-

275

-

276

-

280

-

289

-

291

-

10-31

-

-

10-31

-

-

10-31

S1 = S2

-

-

10-31

-

S1 > S2

-

-

10-31

-

S1 ≧ S2

-

-

10-31

FLD<

-

S1 < S2

-

-

10-30

FLD<=

-

S1 ≦ S2

-

-

10-30

FLD<>

-

S1 ≠ S2

-

-

10-30

FLD=

-

S1 = S2

-

-

10-30

FLD>

-

S1 > S2

-

-

10-30

FLD>=

-

S1 ≧ S2

-

-

10-30

FOR<

-

S1 < S2

-

-

10-32

-

FOR<=

-

S1 ≦ S2

-

-

10-32

290

-

FOR<>

-

S1 ≠ S2

-

-

10-32

287

-

FOR=

-

S1 = S2

-

-

10-32

288

-

FOR>

-

S1 > S2

-

-

10-32

DVP-PLC Application Manual

5 Categories & Use of Application Instructions
Mnemonic
Category

API

16-bit
-

FOR>=

171 GBIN

DGBIN

292

G

177 GPS
144 GPWM
170 GRY

I

I

L

32-bit

24

INC

63

INCD

-

Applicable to
Function
S1 ≧ S2
Gray Code

ES SA
-

BIN

-

-

GPS data receiving

-

-

EH EH
2
3

Page
10-32

-

3

3

9-66

-

-

-

9-76

General PWM Output

-

3

3

8-53

DGRY

BIN

-

3

3

9-65

DINC

Increment

3 3

3

6-41

Incremental Drum Sequencer

-

3

3

7-52

Float to Integer

3 3

3

8-38

-

-

Gray Code

129 INT

DINT

98

INV

-

-

Inverting Operation

3 3

3

3-16

03

IRET

-

-

Interrupt Return

3 3

3

6-8

60

IST

-

-

Initial State

3 3

3

215
217
216
226
229
228
224
225
230

LD&
LD^
LD|
LD<
LD<=
LD<>
LD=
LD>
LD>=

-

S1 & S2
S1 ^ S2
S1 | S2
S1 < S2
S1 ≤ S2
S1 ≠ S2
S1 = S2
S1 > S2
S1 ≥ S2

3
3
3
3
3
3

3
3
3
3
3
3
3
3
3

3
3
3
3
3
3
3
3
3

7-41
10-15
10-15
10-15
10-18
10-18

91

LDF

-

-

Falling-edge Detection Operation

3 3

3

3-13

90

LDP

-

-

Rising-edge Detection Operation

3 3

3

3-12

107 LRC

3 3

DLD&
DLD^
DLD|
DLD<
DLD<=
DLD<>
DLD=
DLD>
DLD>=

10-18
10-18
10-18
10-18

-

Checksum LRC Mode

3

8-16

MAND
MBC
MBR
MBRD
MBS

-

Matrix ‘AND’ Operation
Matrix Bit Status Counting
Matrix Bit Rotation
Read Matrix Bit
Matrix Bit Displacement

-

3
3
3
3
3

3
3
3
3
3

9-82
9-98
9-96
9-90
9-94

187 MBWR

-

Write Matrix Bit

-

3

3

9-92

-

3

3

9-88

3

6-67

3

3

8-64

3
- 3

3

8-66

3

9-87

180
190
189
186
188

185 MCMP

-

Matrix Compare

MEAN

DMEAN

Mean

3 3

148 MEMR

DMEMR

Read File Register

-

149 MEMW

DMEMW

Write File Register

-

45

M

P
Instructio
n

184 MINV

-

176 MMOV

-

100 MODRD

-

-

Read Modbus Data

150 MODRW

-

-

Read/Write Modbus Data

101 MODWR

-

-

Write Modbus Data

181 MOR

-

12

MOV

52

MTR

22

MUL

168 MVM
183 MXNR
182 MXOR

Matrix Inverse Operation
Magnify Move

3 3

9-75
3

8-1
9-1
8-5

Matrix ‘OR’ Operation

3 3 3
- 3 3

9-84

Move

3 3

3

6-21

Input Matrix

-

3

3

7-3

DMUL

Multiplication

3 3

3

6-37

DMVM
-

Move the Designated Bit
Matrix ‘XNR’ Operation
Matrix ‘XOR’ Operation

-

3 3
3 3

9-62
9-86
9-85

DMOV
-

DVP-PLC Application Manual

-

-

5-19

5 Categories & Use of Application Instructions
Mnemonic
Category

N

O

P

API

S

5-20

Applicable to
Function

Page

2’s Complement (Negative)

EH EH
2
3
3 3 3

-

End of a FOR-NEXT loop

3 3

3

6-16

-

S1 & S2
S1 ^ S2
S1 | S2
S1 < S2
S1 ≤ S2
S1 ≠ S2
S1 = S2
S1 > S2
S1 ≥ S2

3
3
3
3
3
3

3
3
3
3
3
3
3
3
3

3
3
3
3
3
3
3
3
3

10-17
10-17
10-17

-

-

Falling-edge Parallel Connection

3 3

3

3-14

-

-

Rising-edge Parallel Connection

3 3

3

3-14

PID

DPID

-

PID Control Loop

3 3

3

7-121

99

PLF

-

-

Falling-edge Output

3 3

3

3-15

89

PLS

-

-

Rising-edge Output

3 3

3

3-14

59

PLSR

DPLSR

-

Pulse Ramp

3 3

3

7-36

157 PLSV

DPLSV

-

Adjustable Speed Pulse Output

-

-

3

9-34

57

PLSY

DPLSY

-

Pulse Y Output

3 3

3

7-26

77

PR

-

Print (ASCII Code Output)

-

3

3

7-86

81

PRUN

Parallel Run

-

3

3

7-106

16-bit

29

NEG

09

NEXT

221
223
222
242
245
244
240
241
246

OR&
OR^
OR|
OR<
OR<=
OR<>
OR=
OR>
OR>=

95

ORF

94

ORP

88

32-bit
DNEG
DOR&
DOR^
DOR|
DOR<
DOR<=
DOR<>
DOR=
DOR>
DOR>=

DPRUN

ES SA

6-46

10-20
10-20
10-20
10-20
10-20
10-20

151 PWD

-

-

Detection of Input Pulse Width

-

-

3

9-19

58

PWM

-

-

Pulse Width Modulation

3 3

3

7-33

67

RAMP

-

-

Ramp Variable Value

-

3

3

7-59

154 RAND

-

Random Number

-

3

3

9-23

33

RCL

DRCL

Rotation Left with Carry

3 3

3

6-51

32

RCR

DRCR

Rotation Right with Carry

3 3

3

6-50

Read VFD-A Status

3 3

3

8-13

Refresh

3 3

3

7-1

105 RDST

R

P
Instructio
n

-

50

REF

-

51

REFF

-

103 REV

-

-

-

Refresh and Filter Adjust

-

3

3

7-2

Reverse Running of VFD-A

3 3

3

8-10

31

ROL

DROL

Rotation Left

3 3

3

6-49

30

ROR

DROR

Rotation Right

3 3

3

6-48

80

RS

-

-

Serial Communication Instruction

3 3

3

7-93

106 RSTEF

-

-

3

8-15

153 RTMD

-

-

3

9-21

152 RTMU

-

-

3

9-20

202 SCAL
203 SCLP

-

73

SEGD

-

3 3
Reset Abnormal VFD-A
End of the Measurement of the Execution
- Time of I Interruption
Start of the Measurement of Execution Time
- of I Interruption
Proportional Value Calculation
Parameter Proportional Value Calculation
3 3
Seven Segment Decoder

74

SEGL

-

61

SER

39

SFRD

35

SFTL

3

7-78

Seven Segment with Latch

3 3

3

7-79

Search a Data Stack

-

3

3

7-48

-

Shift Register Read

-

3

3

6-58

-

Bit Shift Left

3 3

3

6-53

DSER

-

10-1
10-3

DVP-PLC Application Manual

5 Categories & Use of Application Instructions
Mnemonic
Category

API

W

SFTR

-

Bit Shift Right

38

SFWR

-

Shift Register Write

-

3

3

6-57

13

SMOV

-

Shift Move

- 3

3

6-22

69

SORT

-

-

Sort Tabulated Data

-

3

3

7-69

56

SPD

-

-

Speed Detection

3 3

3

7-24

48

SQR

Square Root

3 3

3

6-71

02

SRET

-

-

Subroutine Return

3 3

3

6-5

65

STMR

-

-

Special Timer

-

3

7-56

104 STOP

-

-

Stop VFD-A

3 3

3

8-10

3

6-36

Z

32-bit

DSQR

ES SA

3

6-52

21

SUB

DSUB

Subtraction

3 3

43

SUM

DSUM

Sum of Active Bits

3 3

3

6-65

DSWAP

Byte Swap

3 3

3

8-63

109 SWRD

-

Read Digital Switch

-

-

3

8-20

162 TADD

-

Time Addition

-

3

3

9-56

160 TCMP

-

3

9-54

Time Compare

-

3

70

TKY

DTKY

-

Ten Key Input

-

3

3

7-71

96

TMR

-

-

16-bit Timer

3 3

3

3-9

79

TO

Write CR Data into Special Modules

3 3

3

7-89

Time Read
Time Subtraction

-

3
3

3
3

9-58
9-57

Teaching Timer

-

3

3

7-54

DTO

166 TRD
163 TSUB

-

TTMR

-

167 TWR
161 TZCP

-

Time Write
Time Zone Compare

-

3
3

3
3

9-60
9-55

85

VRRD

-

Volume Read

-

3

3

7-117

86

VRSC

-

Volume Scale

-

3

3

7-119

26

WAND

Logical Word AND

3 3

3

6-43

07

WDT

-

Watchdog Timer Refresh

3 3

3

6-15

27

WOR

DOR

Logical Word OR

3 3

3

6-44

37

WSFL

-

Word Shift Left

-

3

3

6-56

36

WSFR

-

Word Shift Right

-

3

3

6-54

DWSUM

Get the Sum

-

-

179 WSUM
X

Page

34

64

V

Applicable to
Function

EH EH
2
3
3 3 3

16-bit

147 SWAP

T

P
Instructio
n

-

DAND

9-81

28

WXOR

DXOR

Logical Exclusive OR

3 3

3

6-45

17

XCH

DXCH

Exchange

3 3

3

6-29

11

ZCP

DZCP

Zone Compare

3 3

3

6-20

156 ZRN

DZRN

40

ZRST

DVP-PLC Application Manual

-

-

Zero Return

-

-

3

9-29

Zero Reset

3 3

3

6-59

5-21

5 Categories & Use of Application Instructions
MEMO

5-22

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

00

CJ

Operands

Function
Conditional Jump

P

OP

Range
P0~P255

Program Steps
CJ, CJP: 3 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: The destination pointer of conditional jump
Explanations:
1.

Operand S can designate P

2.

P can be modified by index register E, F

3.

In ES/EX/SS series models: Operand S can designate P0 ~ P63

4.

In SA/SX/SC/EH/EH2/SV series models: Operand S can designate P0 ~ P255

5.

When the user does not wish a particular part of PLC program in order to shorten the scan time and execute
dual outputs, CJ instruction or CJP instruction can be adopted.

6.

When the program designated by pointer P is prior to CJ instruction, WDT timeout will occur and PLC will stop
running. Please use it carefully.

7.

CJ instruction can designate the same pointer P repeatedly. However, CJ and CALL cannot designate the same
pointer P; otherwise an error will occur.

8.

Actions of all devices while conditional jumping is being executed.

a) Y, M and S remain their previous status before the conditional jump takes place.
b) Timer 10ms and 100ms that is executing stops.
c) Timer T192 ~ T199 that execute the subroutine program will continue and the output contact executes normally.
d) The high-speed counter that is executing the counting continues counting and the output contact executes
normally.
e) The ordinary counters stop executing.
f)

If the “reset instruction” of the timer is executed before the conditional jump, the device will still be in the reset
status while conditional jumping is being executed.

g) Ordinary application instructions are not executed.
h) The application instructions that are being executed, i.e. API 53 DHSCS, API 54 DHSCR, API 55 DHSZ, API 56
SPD, API 57 PLSY, API 58 PWM, API 59 PLSR, API 157 PLSV, API 158 DRVI, API 159 DRVA, continue being
executed.
Program Example 1:
1.

When X0 = On, the program automatically jumps from address 0 to N (the designated label P1) and keeps its
execution. The addresses between 0 and N will not be executed.

2.

When X0 = Off, as an ordinary program, the program keeps on executing from address 0. CJ instruction will not
be executed at this time.

DVP-PLC Application Manual

6-1

6 Application Instructions API 00-49
X0

( CJ instruction )
CJ

0

P***
P1

X1
Y1
X2
Y2

P1 N

Program Example 2:
1.

CJ instruction can be used in the following 5 conditions between MC and MCR instructions.

a) Without MC ~ MCR.
b) From without MC to within MC. Valid in the loop P1 as shown in the figure below.
c) In the same level N, inside of MC~MCR.
d) From within MC to without MCR.
e) Jumping from this MC ~ MCR to another MC ~ MCR1.
2.

Actions in ES/EX/SS series models V4.7 (and below): When CJ instruction is used between MC and MCR, it
can only be applied without MC ~ MCR or in the same N layer of MC ~ MCR. Jumping from this MC ~ MCR to
another MC ~ MCR will result in errors, i.e. a) and c) as stated above can ensure correct actions; others will
cause errors.

3.

When MC instruction is executed, PLC will push the status of the switch contact into the self-defined stack in
PLC. The stack will be controlled by the PLC, and the user cannot change it. When MCR instruction is executed,
PLC will obtain the previous status of the switch contact from the top layer of the stack. Under the conditions as
stated in b), d) and e), the times of pushing-in and obtaining stack may be different. In this case, the maximum
stack available to be pushed in is 8 and the obtaining of stacks cannot resume once the stack becomes empty.
Thus, when using CALL or CJ instructions, the user has to be aware of the pushing-in and obtaining of stacks.
X0
MC

N0

CJ

P0

CJ

P1

MC

N1

X2
X3
X1
M1000
Y1

P1

MCR

N1

M1000
P0

Y0
MCR

1

N0

This function is only available in ES/EX/SS series models V4.9 (and above) and SA/SX/SC/EH/EH2/SV series models.

6-2

DVP-PLC Application Manual

6 Application Instructions API 00-49
Program Example 3:
1.

The states of each device
Contact state before CJ Contact state when CJ is
is executed
being executed

Device

1ms, 10ms, 100ms
*2
Timer
(accumulative)
SA/EH

C0 ~ C234 *

3

Application
instruction

1

M1, M2, M3 Off

M1, M2, M3 OfftOn

*
Y1 , M20, S1 Off

M1, M2, M3 On

M1, M2, M3 OntOff

*
Y1 , M20, S1 On

M4 Off

M4 OfftOn

Timer T0 is not enabled.

M4 On

M4 OntOff

Timer T0 immediately stops
and is latched. M0 OntOff,
T0 is reset as 0.

M6 Off

M6 OfftOn

Timer T240 is not enabled.

M6 On

M6 OntOff

Once the timer function is
enabled and when met with
CJ instruction, all
accumulative timers will stop
timing and stay latched. M0
OntOff. T240 remains
unchanged.

M7, M10 Off

M10 On/Off trigger

Counter does not count.

M7 Off, M10 On/Off
trigger

M10 On/Off trigger

Counter C0 stops counting
and stays latched. After M0
goes Off, C0 resumes its
counting.

M11 Off

M11 OfftOn

Application instructions are
not executed.

M11 OntOff

The skipped application
instructions are not executed,
but API 53 ~ 59, API 157 ~
159 keep being executed.

Y, M, S

10ms, 100ms
Timer
ES/SA/EH

Output coil state when CJ is
being executed

M11 On

1

*1: Y1 is a dual output. When M0 is Off, M1 will control Y1. When M0 is On, M12 will control Y1.
*2: When the timers (T192 ~ T199, applicable in SA/EH series MPU) used by a subroutine re driven and encounter
the execution of CJ instruction, the timing will resume. After the timing target is reached, the output contact of the
timer will be On.
*3: When the high-speed counters (C235 ~ C255) are driven and encounter the execution of CJ instruction, the
counting will resume, as well as the action of the output points.

DVP-PLC Application Manual

6-3

6 Application Instructions API 00-49
2.

Y1 is a dual output. When M0 = Off, Y1 is controlled by M1. When M0 = On, Y1 is controlled by M12.
M0
CJ

P0

M1
Y1
M2
M20
M17
CJ

P0

M3
S1
M4
K10

TMR

T0

RST

T127

TMR

T127

RST

C0

CNT

C0

K20

MOV

K3

D0

CJ

P63

M5
M6
K1000

M7
M10
M11
M0
P0
M12
Y1
M13
P63

RST

T127

RST

C0

RST

D0

END

6-4

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

01

CALL

Operands

Function
Call Subroutine

P

OP

Range

Program Steps

P0 ~ P255

CALL, CALLP: 3 steps
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: The pointer of call subroutine.
Explanations:
1.

Operand S can designate P.

2.

P can be modified by index register E, F.

3.

In ES/EX/SS series models: Operand S can designate P0 ~ P63.

4.

In SA/SX/SC/EH/EH2/SV series models: Operand S can designate P0 ~ P255.

5.

Edit the subroutine designated by the pointer after FEND instruction.

6.

The number of pointer P, when used by CALL, cannot be the same as the number designated by CJ instruction.

7.

If only CALL instruction is in use, it can call subroutines of the same pointer number with no limit on times.

8.

Subroutine can be nested for 5 levels including the initial CALL instruction. (If entering the sixth level, the
subroutine won’t be executed.)

API

Mnemonic

02

SRET

OP
N/A

Function
Subroutine Return
Descriptions

Automatically returns to the step immediately following the

Program Steps
SRET: 1 steps

CALL instruction which activated the subroutine
PULSE
ES EX SS SA SX SC EH SV

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Explanations:
1.

No operand. No contact to drive the instruction is required.

2.

The subroutine will return to main program by SRET after the termination of subroutine and execute the
sequence program located at the next step to the CALL instruction.

Program Example 1:
When X0 = On, CALL instruction is executed and the program jumps to the subroutine designated by P2. When
SRET instruction is executed, the program returns to address 24 and continues its execution.

DVP-PLC Application Manual

6-5

6 Application Instructions API 00-49
P***

X0
20

CALL
X1

24

P2

call subroutine P***

Y1
FEND

P2

Y0
Subroutine P2
Y0
SRET

subroutine return

Program Example 2:
1.

When X10 goes from Off to On, its rising-edge trigger executes CALL P10 instruction and the program jumps to
the subroutine designated by P10.

2.

When X11 is On, CALL P11 is executed and the program jumps to the subroutine designated by P11.

3.

When X12 is On, CALL P12 is executed and the program jumps to the subroutine designated by P12.

4.

When X13 is On, CALL P13 is executed and the program jumps to the subroutine designated by P13.

5.

When X14 is On, CALL P14 is executed and the program jumps to the subroutine designated by P14. When
SRET is executed, the program returns to the previous P※ subroutine and continues its execution.

6.

6-6

After SRET instruction is executed in P10 subroutine, returning to the main program.

DVP-PLC Application Manual

6 Application Instructions API 00-49
X0
INC

D0

P12

X2
INC

Y0

Y10

X10

X13
CALL

P10

INC

D1

X0

Main
Program

P13

INC

D31

subroutine

Y1

Y11

FEND

SRET
X2

INC

D10

INC

P13

Y4

D40

Y12

X11

X14
CALL

P11

X2
INC

subroutine

CALL

P14

INC

D41

X2

D11

Y5

Y13

SRET

SRET

X2

subroutine

X2
INC

P11

CALL
X2

X2
P10

D30

D20

P14

Y6

INC

D50

Y14
subroutine

X12
CALL

P12
subroutine

X2
INC

D21

SRET
END

Y7
SRET

DVP-PLC Application Manual

6-7

6 Application Instructions API 00-49
API

Mnemonic

03

IRET

OP
N/A

Function
Interrupt Return
Descriptions

Program Steps

IRET ends the processing of an interruption subroutine and

IRET: 1 steps

returns to the execution of the main program.
PULSE
ES EX SS SA SX SC EH SV

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Explanations:
1.

No operand. No contact to drive the instruction is required.

2.

Interruption return refers to interrupt the subroutine.

3.

After the interruption is over, returning to the main program from IRET to execute the next instruction where the
program was interrupted.

API

Mnemonic

04

EI

Enable Interrupts

OP
N/A

Function

Descriptions

Program Steps

See more details of the explanation on this instruction in DI EI: 1 steps
(Disable Interruption) instruction.
PULSE
ES EX SS SA SX SC EH SV

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Explanations:
1.

No operand. No contact to drive the instruction is required.

2.

The pulse width of the interruption signal should be >200us.

3.

See DI instruction for the range of the No. of I for all models.

4.

See DI instruction for more details about M1050 ~ M1059, M1280 ~ M1299.

API

Mnemonic

05

DI

OP

Function
Disable Interrupts
Descriptions

When the special auxiliary relay M1050 ~ M1059, M1280 ~
N/A

Program Steps
DI: 1 step

M1299 for disabling interruption is driven, the corresponding
interruption request will not be executed even in the range
allowed for interruptions.
16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2
PULSE

Explanations:
1.

6-8

No operand. No contact to drive the instruction is required.

DVP-PLC Application Manual

6 Application Instructions API 00-49
2.

EI instruction allows interrupting subroutine in the program, e.g. external interruption, timed interruption, and
high-speed counter interruption.

3.

In the program, using interruption subroutine between EI and DI instruction is allowed. However, you can
choose not to use DI instruction if there is no interruption-disabling section in the program.

4.

When M1050 ~ M1059 are the special auxiliary relays to drive disabling interruption in ES/SA, or M1280 ~
M1299 are the special auxiliary relays to drive disabling interruption in EH/EH2/SV, the corresponding
interruptions will not be executed even in the area allowed for interruptions.

5.

Pointer for interruption (I) must be placed after FEND instruction.

6.

Other interruptions are not allowed during the execution of interruption subroutine.

7.

When many interruptions occur, the priority is given to the firstly executed interruption. If several interruptions
occur simultaneously, the priority is given to the interruption with the smaller pointer No.

8.

The interruption request occurring between DI and EI instructions that cannot be executed immediately will be
memorized and will be executed in the area allowed for interruption.

9.

The time interruptions in ES/SA will not be memorized.

10.

When using the interruption pointer, DO NOT repeatedly use the high-speed counter driven by the same X input
contact.

11.

When immediate I/O is required during the interruption, write REF instruction in the program to update the status
of I/O.

Program Example:
During the operation of PLC, when the program scans to the area between EI and DI instructions and X1 = Off→On
or X2 = Off→On, interruption subroutine A or B will be executed. When the subroutine executes to IRET, the program
will return to the main program and resumes its execution.
EI
X0
Y1
DI

Enable interruption

Disable interruption

EI
FEND
I 101

Enable interruption

Y0
Interruption subroutine A
IRET

I 201

Y0

Interruption subroutine B

IRET

Remarks:
1.

No. of interruption pointer I in ES/EX/SS:

DVP-PLC Application Manual

6-9

6 Application Instructions API 00-49
a) External interruptions: (I001, X0), (I101, X1), (I201, X2), (I301, X3) 4 points2.
b) Time interruptions: I6□□, 1 point (□□ = 10 ~ 99, time base = 1ms) (support V5.7 and above)
c) Communication interruption for receiving specific words (I150) (support V5.7 and above)
2.

No. of interruption pointer I in SA/SX/SC:

a) External interruptions: (I001, X0), (I101, X1), (I201, X2), (I301, X3), (I401, X4), (I501, X5) 6 points.
b) Time interruptions: I6□□, I7□□ 2 points. (□□ = 1 ~ 99ms, time base = 1ms)
c) High-speed counter interruptions: I010, I020, I030, I040 4 points. (used with API 53 DHSCS instruction to
generate interruption signals)
d) Communication interruption for receiving specific words .(I150)
e) The order for execution of interruption pointer I: high-speed counter interruption, external interruption, time
interruption and communication interruption for receiving specific words.
f)

Among the following 6 interruption No., (I001, I010), (I101, I020), (I201, I030), (I301, I040), (I401, I050), (I501,
I060), the program allows the user to use only one of the two numbers in a pair. If the user uses the two
numbers in the pair, grammar check errors may occur when the program is written into PLC.

3.

No. of interruption pointer I in EH/EH2/SV:

a) External interruptions: (I00□, X0), (I10□, X1), (I20□, X2), (I30□, X3), (I40□, X4), (I50□, X5) 6 points. (□ = 0
designates interruption in falling-edge, □ = 1 designates interruption in rising-edge)
b) Time interruptions: I6□□, I7□□, 2 points. (□□ = 1~99ms, time base = 1ms)
I8□□ 1 point. (□□ = 1 ~ 99ms, time base = 0.1ms)
c) High-speed counter interruptions: I010, I020, I030, I040, 1050, 1060 6 points. (used with API 53 DHSCS
instruction to generate interruption signals)
d) When pulse output interruptions I110, I120 (triggered when pulse output is finished), I130, I140 (triggered when
the first pulse output starts) are executed, the currently executed program is interrupted and jumps to the
designated interruption subroutine.
e) Communication interruption: I150, I160, I170
f)

Frequency measurement card interruption: I180

g) The order for execution of interruption pointer I: external interruption, time interruption, high-speed counter
interruption, pulse interruption, communication interruption and frequency measurement card interruption.
4.

No. of interruption pointer I in EH3/SV2:

a) External interruptions: (I00□, X0), (I10□, X1), (I20□, X2), (I30□, X3), (I40□, X4), (I50□, X5), (I60□, X6),
(I70□, X7), (I90□, X10), (I91□, X11), (I92□, X12), (I93□, X13), (I94□, X14), (I95□, X15), (I96□, X16), (I97□,
X17) 16 points. (□ = 0 designates interruption in falling-edge, □ = 1 designates interruption in rising-edge)
b) Time interruptions: I6□□, I7□□, 2 points. (□□ = 2~99ms, time base = 1ms)
I8□□ 1 point. (□□ = 1 ~ 99ms, time base = 0.1ms)
c) High-speed counter interruptions: I010, I020, I030, I040, 1050, 1060 6 points. (used with API 53 DHSCS
instruction to generate interruption signals)
d) When pulse output interruptions I110, I120 (triggered when pulse output is finished), I130, I140 (triggered when
the first pulse output starts) are executed, the currently executed program is interrupted and jumps to the
2

Input points occupied by external interruptions cannot be used for inputs of high-speed counters; otherwise grammar check errors may occur
when the program is written in PLC.

6-10

DVP-PLC Application Manual

6 Application Instructions API 00-49
designated interruption subroutine.
e) Communication interruption: I150, I160, I170
f)

The order for execution of interruption pointer I: external interruption, time interruption, high-speed counter
interruption, pulse interruption, and communication interruption.

5.

“Disable interruption” flags in ES/EX/SS:
Flag
M1050
M1051
M1052
M1053
M1056

6.

Disable external interruption I001
Disable external interruption I101
Disable external interruption I201
Disable external interruption I301
Disable time interruption I6□□

“Disable interruption” flags in SA/SX/SC:
Flag
M1050
M1051
M1052
M1053
M1054
M1055
M1056
M1057
M1059

7.

Function

Function
Disable external interruption I001
Disable external interruption I101
Disable external interruption I201
Disable external interruption I301
Disable external interruption I401
Disable external interruption I501
Disable time interruption I6□□
Disable time interruption I7□□
Disable high-speed counter interruption I010 ~ I060

“Disable interruption” flags in EH/EH2/SV/EH3/SV2:
Flag
M1280
M1281
M1282
M1283
M1284
M1285
M1286
M1287
M1288
M1289
M1290
M1291
M1292
M1293
M1294
M1295
M1296
M1297
M1298
M1299
M1300

Function
Disable external interruption I00□
Disable external interruption I10□
Disable external interruption I20□
Disable external interruption I30□
Disable external interruption I40□
Disable external interruption I50□
Disable time interruption I6□□
Disable time interruption I7□□
Disable time interruption I8□□
Disable high-speed counter interruption I010
Disable high-speed counter interruption I020
Disable high-speed counter interruption I030
Disable high-speed counter interruption I040
Disable high-speed counter interruption I050
Disable high-speed counter interruption I060
Disable pulse output interruption I110
Disable pulse output interruption I120
Disable pulse output interruption I130
Disable pulse output interruption I140
Disable communication interruption I150
Disable communication interruption I160

DVP-PLC Application Manual

6-11

6 Application Instructions API 00-49
Flag
M1301
M1302
M1340
M1341
M1342
M1343

6-12

Function
Disable communication interruption I170
Disable frequency measurement card interruption I180
Generate interruption I110 after CH0 pulse is sent
Generate interruption I120 after CH1 pulse is sent
Generate interruption I130 when CH0 pulse is being sent
Generate interruption I140 when CH1 pulse is being sent

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

06

FEND

Function
The End of The Main Program (First End)

OP
N/A

Descriptions

Program Steps

No contact to drive the instruction is required.

FEND: 1 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Explanations:
1.

This instruction denotes the end of the main program. It has the same function as that of END instruction when
being executed by PLC.

2.

CALL must be written after FEND instruction and add SRET instruction in the end of its subroutine. Interruption
program has to be written after FEND instruction and IRET must be added in the end of the service program.

3.

If several FEND instructions are in use, place the subroutine and interruption service programs between the
final FEND and END instruction.

4.

After CALL instruction is executed, executing FEND before SRET will result in errors in the program.

5.

After FOR instruction is executed, executing FEND before NEXT will result in errors in the program.

CJ Instruction Program Flow:
The program flow
when X0=off,
X1=off

The program flow when X=On
and the program jumps to P0.

0
main
program
X0
CJ

P0

CALL

P63

X1
main
program

P0

P63

I301

DVP-PLC Application Manual

main
program

CALL instruction
subroutine

Interruption
subroutine

6-13

6 Application Instructions API 00-49
CALL Instruction Program Flow:
The program flow
when X0=off,
X1=off

0

The program flow
when X0=Off,
X1=On.

main
program
X0
CJ

P0

CALL

P63

X1
main
program

P0

P63

I301

6-14

main
program

CALL instruction
subroutine

Interruption
subroutine

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

07

WDT

Function
P

Watchdog Timer Refresh

OP

Descriptions

Program Steps

N/A

WDT, WDTP: 1 steps
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Explanations:
1.

No operand.

2.

The watchdog timer in DVP series PLCs is used for monitoring the operation of the PLC system.

3.

WDT instruction can be used to reset Watch Dog Timer. If the PLC scan time (from step 0 to END or when
FEND instruction is executed) exceeds 200ms, PLC ERROR LED will flash. The user will have to turn off PLC
and back On again. PLC will determine RUN/STOP status by RUN/STOP switch. If there is no RUN/STOP
switch, PLC will return to STOP status automatically.

4.

When to use WDT:

a) When errors occur in the PLC system.
b) When the executing time of the program is too long, resulting in the scan time being larger than the content in
D1000, the user can improve the problem by the following two methods.
„

Using WDT instruction

STEP0

WDT

t1

„

END(FEND)

t2

Using the set value in D1000 (default value: 200ms) to change the time for watchdog.

Program Example:
Assume the scan time of the program is 300ms, divide the program into two parts and place WDT instruction in the
middle of the two parts, making scan time of the first half and second half of the program being less than 200ms.
300ms program
END

Dividing the program to two parts
so that both parts' scan time are
less than 200ms.

150ms program
X0

WDT

Watchdog timer reset

150ms program
END

DVP-PLC Application Manual

6-15

6 Application Instructions API 00-49
API

Mnemonic

08

FOR
Type

Operands
Start of a FOR-NEXT Loop

Bit Devices
X

OP

Y

Function

M

Word Devices

S

S

Program Steps

K H KnX KnY KnM KnS T C D E
* *
*
*
*
*
* * * *

F FOR: 3 steps
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: The number of repeated nested loops
Explanations:
1.

No contact to drive the instruction is required.

2.

See the specifications of each model for their range of use.

API

Mnemonic

09

NEXT

Function
End of a FOR-NEXT Loop

OP

Descriptions

N/A

Program Steps
NEXT: 1 steps

PULSE
ES EX SS SA SX SC EH SV

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Explanations:
1.

No operand. No contact to drive the instruction is required.

2.

FOR instruction indicates FOR ~ NEXT loops executing back and forth N times before escaping for the next
execution.

3.

N = K1 ~ K32,767. N is regarded as K1 when N ≤ 1.

4.

When FOR~NEXT loops are not executed, the user can use the CJ instruction to escape the loops.

5.

Error will occur when

a) NEXT instruction is before FOR instruction.
b) FOR instruction exists but NEXT instruction does not exist.
c) There is NEXT instruction after FEND or END instruction.
d) The number of instructions between FOR ~ NEXT differs.
6.

FOR~NEXT loops can be nested for maximum five levels. Be careful that if there are too many loops, the
increased PLC scan time may cause timeout of watchdog timer and error. Users can use WDT instruction to
modify this problem.

Program Example 1:
After program A has been executed for 3 times, it will resume its execution after NEXT instruction. Program B will be
executed for 4 times whenever program A is executed once. Therefore, program B will be executed 3 × 4 = 12 times
in total.

6-16

DVP-PLC Application Manual

6 Application Instructions API 00-49
FOR

K3

FOR

K4
B

A

NEXT
NEXT

Program Example 2:
When X7 = Off, PLC will execute the program between FOR ~ NEXT. When X7 = On, CJ instruction jumps to P6 and
avoids executing the programs between FOR ~ NEXT.
X7
CJ

P6

MOV

K0

FOR

K3

MOV

D0

INC

D0

M0
D0

M0
D1

MEXT
P6

X10
Y10

DVP-PLC Application Manual

6-17

6 Application Instructions API 00-49
Program Example 3:
When the programs between FOR ~ NEXT are not to be executed, the user can adopt CJ instruction for a jumping.
When the most inner FOR ~ NEXT loop is in the status of X1 = On, CJ instruction executes jumping to P0 and skips
the execution on P0.
X0
TMR

T0

FOR

K4X100

INC

D0

FOR

K2

INC

D1

FOR

K3

INC

D2

FOR

K4

K10

X0

X0

X0

X0
WDT
INC

D3

CJ

P0

FOR

K5

INC

D4

X1

X0

NEXT
P0

NEXT
NEXT
NEXT
NEXT
END

6-18

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

10

D

Operands

CMP

Type

Compare

P

Bit Devices
X

OP
S1
S2
D

Function

Word Devices

Y

M

S

*

*

*

Program Steps

K H KnX KnY KnM KnS T C D E F CMP, CMPP: 7 steps
* *
*
*
*
*
* * * * * DCMP, DCMPP: 13 steps
* *
*
*
*
*
* * * * *
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Comparison Value 1 S2: Comparison Value 2 D: Comparison result
Explanations:
1.

If S1 and S2 are used in device F, only 16-bit instruction is applicable.

2.

Operand D occupies 3 consecutive devices.

3.

See the specifications of each model for their range of use.

4.

The contents in S1 and S2 are compared and the result will be stored in D.

5.

The two comparison values are compared algebraically and the two values are signed binary values. When b15
= 1 in 16-bit instruction or b31 = 1 in 32-bit instruction, the comparison will regard the value as negative binary
values.

Program Example:
1.

Designate device Y0, and operand D automatically occupies Y0, Y1, and Y2.

2.

When X10 = On, CMP instruction will be executed and one of Y0, Y1, and Y2 will be On. When X10 = Off, CMP
instruction will not be executed and Y0, Y1, and Y2 remain their status before X10 = Off.

3.

If the user need to obtain a comparison result with ≥ ≤, and ≠, make a series parallel connection between Y0 ~
Y2.
X10
CMP

K10

D10

Y0

Y0
If K10>D10, Y0 = On
Y1
If K10=D10, Y1 = On
Y2

4.

If K10 S2, the instruction performs comparison by using S1 as the lower/upper bound.

7.

The two comparison values are compared algebraically and the two values are signed binary values. When b15
= 1 in 16-bit instruction or b31 = 1 in 32-bit instruction, the comparison will regard the value as negative binary
values.

Program Example:
1.

Designate device M0, and operand D automatically occupies M0, M1 and M2.

2.

When X0 = On, ZCP instruction will be executed and one of M0, M1, and M2 will be On. When X0 = Off, ZCP
instruction will not be executed and M0, M1, and M2 remain their status before X0 = Off.
X0
ZCP

K10

K100

C10

M0

M0
If C10 < K10, M0 = On
M1
M2

3.

If K10 <
= C10 <
= K100, M1 = On
If C10 > K100, M2 = On

To clear the comparison result, use RST or ZRST instruction.
X0

6-20

X0
RST

M0

RST

M1

RST

M2

ZRST

M0

M2

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

12

D

MOV

Type

Y

M

Function
Move

P

Bit Devices
X

OP

Operands

Word Devices

S

Program Steps

K H KnX KnY KnM KnS T C D E F MOV, MOVP: 5 steps
* *
*
*
*
*
* * * * * DMOV, DMOVP: 9 steps
*
*
*
* * * * *

S
D

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source of data

D: Destination of data

Explanations:
1.

If S and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

When this instruction is executed, the content of S will be moved directly to D. When this instruction is not
executed, the content of D remains unchanged.

4.

If the operation result refers to a 32-bit output, (i.e. application instruction MUL and so on), and the user needs
to move the present value in the 32-bit high-speed counter, DMOV instruction has to be adopted.

Program Example:
1.

MOV instruction has to be adopted in the moving of 16-bit data.

a) When X0 = Off, the content in D10 will remain unchanged. If X0 = On, the value K10 will be moved to D10 data
register.
b) When X1 = Off, the content in D10 will remain unchanged. If X1 = On, the present value T0 will be moved to
D10 data register.
2.

DMOV instruction has to be adopted in the moving of 32-bit data.
When X2 = Off, the content in (D31, D30) and (D41, D40) will remain unchanged. If X2 = On, the present value
of (D21, D20) will be sent to (D31, D30) data register. Meanwhile, the present value of C235 will be moved to
(D41, D40) data register.
X0
MOV

K10

D0

MOV

T0

D10

DMOV

D20

D30

DMOV

C235

D40

X1
X2

DVP-PLC Application Manual

6-21

6 Application Instructions API 00-49
API

Mnemonic

13

SMOV
Type

Operands
Shift Move

P

Bit Devices
X

OP

Function

Y

M

S

S
m1
m2
D
n

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E
*
*
*
*
* * * *
* *
* *
*
*
*
* * * *
* *

F SMOV, SMOVP: 11 steps
*
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source of data
source data

m1: Start digit to be moved of the source data m2: Number of digits (nibbles) to be moved of the

D: Destination device

n: Start digit of the destination position for the moved digits

Explanations:
1.

This instruction is able to re-allocate or combine data. When the instruction is executed, m2 digits of contents
starting from digit m1 (from high digit to low digit) of S will be sent to m2 digits starting from digit n (from high digit
to low digit) of D.

2.

Range: m1 = 1 ~ 4; m2 = 1 ~ m1; n = m2 ~ 4

3.

See the specifications of each model for their range of use.

4.

M1168 is designated by SMOV working mode. When M1168 = On, the program is in BIN mode. When M1168 =
Off, the program is in BCD mode.

Program Example 1:
1.

When M1168 = Off (in BCD mode) and X0 = On, the 4th (thousand) and 3rd (hundred) digit of the decimal value
in D10 start to move to the 3rd (hundred) and 2nd (ten) digit of the decimal value in D20. 103 and 100 of D20
remain unchanged after this instruction is executed.

2.

When the BCD value exceeds the range of 0 ~ 9,999, PLC will determine an operation error and will not execute
the instruction. M1067, M1068 = On and D1067 records the error code OE18 (hex).
M1001
M1168
X0
SMOV

D10

K4

K2

D20

K3

D10(BIN 16 bits)
Auto conversion

10

3

2

10

1

10

10

10

Unchanged

Unchanged
3

0

10

2

1

10

0

10

D10(BCD 4 digits)
Shift move

D20(BCD 4 digits)
Auto conversion

D20(BIN 16 bits)

6-22

DVP-PLC Application Manual

6 Application Instructions API 00-49
Before the execution, assume D10 = K1234 and D20 = K5678. After the execution, D10 will remain unchanged and
D20 will become K5128.
Program Example 2:
When M1168 = On (in BIN mode) and SMOV instruction is in use, D10 and D20 will not be converted in BCD format
but be moved in BIN format (4 digits as a unit).
M1000
M1168
X0
SMOV

Digit 4

Digit 3

D10

Digit 2

K4

K2

D20

K3

Digit 1

D10(BIN 16 bits)
Moving digits

D20(BIN 16 bits)
Digit 4
Unchanged

Digit 3

Digit 2

Digit 1
Unchanged

Before the execution, assume D10 = H1234 and D20 = H5678. After the execution, D10 will remain unchanged and
D20 will become H5128.
Program Example 3:
1.

This instruction can be used to combine the DIP switches connected to the input terminals with interrupted No.

2.

Move the 2nd right digit of the DIP switch to the 2nd right digit of D2, and the 1st left digit of the DIP switch to the
1st right digit of D1.

3.

Use SMOV instruction to move the 1st digit of D1 to the 3rd digit of D2 and combine the two DIP switches into
one.
2

1

0

10

10

10

6

4

2

8

8
8

X13~X10

X27~X20

PLC
M1001
M1168
M1000
BIN

K2X20

D2

(X20~X27)BCD
D2(BIN)
2 digits

BIN

K1X10

D1

(X10~X13)BCD
1 digit
D1(BIN)

D1

K1

SMOV

DVP-PLC Application Manual

K1

D2

K3

6-23

6 Application Instructions API 00-49
API

Mnemonic

14

D

CML

Type

Operands
Compliment

P

Bit Devices
X

OP

Y

Function

M

S

S
D

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E
* *
*
*
*
*
* * * *
*
*
*
* * * *

F CML, CMLP: 5 steps
* DCML, DCMLP: 9 steps
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source of data D: Destination device
Explanations:
1.

If S and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

This instruction can be used for phase-reversed output.

4.

Reverse the phase (0→1, 1→0) of all the contents in S and send the contents to D. Given that the content is a
constant K, K will be automatically converted into a BIN value.

Program Example 1:
1.

When X10 = On, b0 ~ b3 in D1 will be phase-reversed and send to Y0 ~ Y3.
X10
CML

K1Y0

D1

b 15
D1

1

0

1

0

1

0

1

0

1

0

1

0

b3

b2

b1

b0

1

0

1

0

0

1

0

1

Symbol bit (0=positive, 1=negative)

No data

Sending the phase-reversed data

Program Example 2:
The loop below can also adopt CML instruction (see right below).

6-24

DVP-PLC Application Manual

6 Application Instructions API 00-49
X000
M0
X001
M1
X002

M2

X003
M3

M1000
CML

X000
M0

K1X0

K1M0

Normally on contact

X001
M1
X002

M2

X003
M3

DVP-PLC Application Manual

6-25

6 Application Instructions API 00-49
API

Mnemonic

15

BMOV
Type

Y

M

S
D
n

Function
Block Move

P

Bit Devices
X

OP

Operands

S

Word Devices
K H KnX KnY KnM KnS
*
*
*
*
*
*
*
* *

Program Steps

T C D E
* * *
* * *
* * *

F BMOV, BMOVP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start of source devices D: Start of destination devices n: Number of data to be moved
Explanations:
1.

Range of n: 1 ~ 512

2.

See the specifications of each model for their range of use.

3.

The contents in n registers starting from the device designated by S will be moved to n registers starting from
the device designated by D. If n exceeds the actual number of available source devices, only the devices that
fall within the valid range will be used.

Program Example 1:
When X10 = On, the contents in registers D0 ~ D3 will be moved to the 4 registers D20 ~ D23.
X10
D20

K4

D0

D20

D1

D21

D2
D3

D22
D23

n=4

Program Example 2:
1.

Assume the bit devices KnX, KnY, KnM and KnS are designated for moving, the number of digits of S and D has
to be the same, i.e. their n has to be the same.

2.

6-26

ES/EX/SS do not support the use of KnX, KnY, KnM, KnS and E, F index register modification.

DVP-PLC Application Manual

6 Application Instructions API 00-49
M1000
K1M0

K1Y0

M0

K3

M1
M2
M3

M4
M5

n=3

M6
M7

M8

Y10

M9

Y11

M10
M11

Y12
Y13

Program Example 3:
To avoid coincidence of the device numbers to be moved designated by the two operands and cause confusion,
please be aware of the arrangement on the designated device numbers.
1.

When S > D, the instruction is processed following the order 1→2→3
X10
BMOV

D20

D19

K3

D20
D21
D22

2.

2
3

D19
D20
D21

In EH/EH2/SV/EH3/SV2, when S < D, the instruction is processed following the order 1→2→3
X11
BMOV

D10

D11

K3

D10
D11
D12

3.

1

3
2
1

D11
D13

In ESEX/SS/SA/SX/SC, when S < D, avoid the number difference of “1” and the instruction is processed
following the order 3→2→1. If the devices have the number difference of “1”, the contents in D11 ~ D13 will all
be the content in D10.
X11
BMOV

D10

D11

K3

D10
D11
D12

DVP-PLC Application Manual

3
2
1

D11
D13

6-27

6 Application Instructions API 00-49
API

Mnemonic

16

D

Operands

FMOV

Type

Fill Move

P

Bit Devices
X

OP

Function

Y

M

S

S
D
n

Word Devices
K H KnX KnY KnM KnS T C D E
* *
*
*
*
*
* * * *
*
*
*
* * *
* *

Program Steps
F FMOV, FMOVP: 7 steps
* DFMOV, DFMOVP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source of data D: Destination of data n: Number of data to be moved
Explanations:
1.

If S is used in device F, only 16-bit instruction is applicable.

2.

Range of n: 1~ 512 (16-bit, 32-bit instructions)

3.

See the specifications of each model for their range of use.

4.

The contents in n registers starting from the device designated by S will be moved to n registers starting from
the device designated by D. If n exceeds the actual number of available source devices, only the devices that
fall within the valid range will be used.

5.

ES/EX/SS do not support the use of KnX, KnY, KnM, KnS and E, F index register modification.

Program Example:
When X10 = On, K10 will be moved to the 5 consecutive registers starting from D10.
X10
FMOV

K10

6-28

K10

D10

K10

D10

K10

D11

K10

D12

K10

D13

K10

D14

K5

n=5

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

17

D

Operands

XCH

Type

Exchange

P

Bit Devices
X

OP

Y

M

Function

S

D1
D2

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F XCH, XCHP: 5 steps
*
*
*
* * * * * DXCH, DXCHP: 9 steps
*
*
*
* * * * *
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D1: Data to be exchanged 1

D2: Data to be exchanged 2

Explanations:
1.

If D1 and D2 are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

The contents in the devices designated by D1 and D2 will exchange.

4.

Flag: M1303 (designated by XCH working mode).

Program Example 1:
When X0 = Off→On, the contents in D20 and D40 exchange with each other.
X0
XCHP

D20

Before
execution

After
execution

D20

120

40

D20

D40

40

120

D40

D40

Program Example 2:
When X0 = Off → On, the contents in D100 and D200 exchange with each other.
X0
DXCHP D100

Before
execution

D200

After
execution

D100
D101

D100
20

40

D200
D201

D101
D200

40

20

D201

Remarks:
1.

ES/EX/SS do not support M1303.

2.

As a 16-bit instruction, when the devices designated by D1 and D2 are the same and M1303 = On, the upper and
lower 8 bits of the designated devices exchange with each other.

3.

As a 32-bit instruction, when the devices designated by D1 and D2 are the same and M1303 = On, the upper and
lower 16 bits in the individual designated device exchange with each other.

4.

When X0 = On and M1303 = On, the 16-bit contents in D100 and those in D101 will exchange with each other.

DVP-PLC Application Manual

6-29

6 Application Instructions API 00-49
X0

Before
execution

After
execution

D100L

9

8

D100L

D100H

20

40

D100H

D101L

8

9

D101L

D101H

40

20

D101H

M1303
DXCHP

6-30

D100

D100

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

18

D
Type

BCD

Y

M

S
D

Function
Binary Coded Decimal

P

Bit Devices
X

OP

Operands

S

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F BCD, BCDP: 5 steps
*
*
*
*
* * * * * DBCD, DBCDP: 9 steps
*
*
*
* * * * *
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source of data D: Conversion result
Explanations:
1.

If S and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

Flags: M1067 (operation error); M1068 (operation error); D1067 (error code)

4.

The content in S (BIN value) is converted into BCD value and stored in D.

5.

As a 16-bit (32-bit) instruction, when the conversion result exceeds the range of 0 ~ 9,999 (0 ~ 99,999,999), and
M1067, M1068 = On, D1067 will record the error code 0E18 (hex).

6.

The four arithmetic operations and applications in PLC and the execution of INC and DEC instructions are
performed in BIN format. Therefore, if the user needs to see the decimal value display, simply use this
instruction to convert the BIN value into BCD value.

Program Example:
1.

When X0 = On, the binary value of D10 will be converted into BCD value, and the 1s digit of the conversion
result will be stored in K1Y0 (Y0 ~ Y3, the 4 bit devices).
X0
BCD

2.

D10

K1Y0

When D10 = 001E (hex) = 0030 (decimal), the execution result will be: Y0 ~ Y3 = 0000(BIN).

DVP-PLC Application Manual

6-31

6 Application Instructions API 00-49
API

Mnemonic

19

D
Type

BIN

Y

M

S
D

Function
Binary

P

Bit Devices
X

OP

Operands

Word Devices

S

K H KnX KnY KnM KnS T C D E
*
*
*
*
* * * *
*
*
*
* * * *

Program Steps
F BIN, BINP: 5 steps
* DBIN, DBINP: 9 steps
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source of data D: Conversion result
Explanations:
1.

If S and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

Flags: M1067 (operation error); M1068 (operation error); D1067 (error code)

4.

The content in S (BCD value) is converted into BIN value and stored in D.

5.

Valid range of S : BCD (0 ~ 9,999), DBCD (0 ~ 99,999,999)

6.

Provided the content in S is not a BCD value (in hex and any one of its digits does not fall in the range of 0 ~ 9),
an operation error will occur. M1067, M1068 = On and D1067 records the error code 0E18 (hex).

7.

Constant K and H will automatically be converted into BIN format. Thus, they do not need to adopt this
instruction.

Program Example:
When X0 = On, the BCD value of K1M0 will be converted to BIN value and stored in D10.
X0
BIN

K1M0

D10

Remarks:
Explanations on BCD and BIN instructions:
1.

When PLC needs to read an external DIP switch in BCD format, BIN instruction has to be first adopted to
convert the read data into BIN value and store the data in PLC.

2.

When PLC needs to display its stored data by a 7-segment display in BCD format, BCD instruction has to be
first adopted to convert the data into BCD value and send the data to the 7-segment display.

3.

When X0 = On, the BCD value of K4X0 is converted into BIN value and sent it to D100. The BIN value of D100
will then be converted into BCD value and sent to K4Y20.
X0

6-32

BIN

K4X0

D100

BCD

D100

K4Y20

DVP-PLC Application Manual

6 Application Instructions API 00-49
3

10

10

6

6

8

8

2

1

10

10

4

2

8

0

4-digit DIP switch in BCD format

8

X17

X0

4-digit BCD value
Using BIN instruction to store
the BIN value into D100
Using BCD instruction to convert the
content in D100 into a 4-digit BCD value.
Y37

Y20

4-digit 7-segment display in BCD format

DVP-PLC Application Manual

6-33

6 Application Instructions API 00-49
API

Mnemonic

20

D

ADD

Type

Y

M

Function
Addition

P

Bit Devices
X

OP

Operands

S

S1
S2
D

Word Devices
K H KnX KnY KnM KnS
* *
*
*
*
*
* *
*
*
*
*
*
*
*

T C D E
* * * *
* * * *
* * * *

Program Steps
F ADD, ADDP: 7 steps
* DADD, DADDP: 13 steps
*
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Summand

S2: Addend

D: Sum

Explanations:
1.

If S1, S2 and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

4.

This instruction adds S1 and S2 in BIN format and store the result in D.

5.

The highest bit is symbolic bit 0 (+) and 1 (-), which is suitable for algebraic addition, e.g. 3 + (-9) = -6.

6.

Flag changes in binary addition
In 16-bit BIN addition,
a)

If the operation result = 0, zero flag M1020 = On.

b)

If the operation result < -32,768, borrow flag M1021 = On.

c)

If the operation result > 32,767, carry flag M1022 = On.

In 32-bit BIN addition,
a)

If the operation result = 0, zero flag M1020 = On.

b)

If the operation result < -2,147,483,648, borrow flag M1021 = On.

c)

If the operation result > 2,147,483,647, carry flag M1022 = On.

Program Example 1:
In 16-bit BIN addition:
When X0 = On, the content in D0 will plus the content in D10 and the sum will be stored in D20.
X0
ADD

D0

D10

D20

Program Example 2:
In 32-bit BIN addition:
When X0 = On, the content in (D31, D30) will plus the content in (D41, D40) and the sum will be stored in (D51, D50).
D30, D40 and D50 are low 16-bit data; D31, D41 and D51 are high 16-bit data.
X10
DADD

D30

D40

D50

(D31, D30) + (D41, D40) = (D51, D50)

6-34

DVP-PLC Application Manual

6 Application Instructions API 00-49
Remarks:
Flags and the positive/negative sign of the values:
16-bit :

-

-2、-1、0、-32,768

Borrow flag

32-bit :

The highest bit of
the data = 1 (negative)

32,767、0、1、2

The highest bit of
the data = 0 (positive)

Zero flag

-2、-1、0、-2,147,483,648

DVP-PLC Application Manual

+

-1、0、1

Zero flag

Borrow flag

Zero flag

Zero flag

Zero flag

-

-1、0、1

The highest bit of
the data = 1 (negative)

Carry flag

Zero flag

+

2,147,483,647、0、1、2

The highest bit of
the data = 0 (positive)

Carry flag

6-35

6 Application Instructions API 00-49
API

Mnemonic

21

D

Operands

SUB

Type

Subtraction

P

Bit Devices
X

OP

Y

M

Function

S

S1
S2
D

Word Devices
K H KnX KnY KnM KnS
* *
*
*
*
*
* *
*
*
*
*
*
*
*

T C D E
* * * *
* * * *
* * * *

Program Steps
F SUB, SUBP: 7 steps
* DSUB, DSUBP: 13 steps
*
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Minuend

S2: Subtrahend

D: Remainder

Explanations:
1.

If S1, S2 and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

4.

This instruction subtracts S1 and S2 in BIN format and stores the result in D.

5.

The highest bit is symbolic bit 0 (+) and 1 (-), which is suitable for algebraic subtraction.

6.

Flag changes in binary subtraction
In 16-bit instruction:
a) If the operation result = 0, zero flag M1020 = On.
b) If the operation result < –32,768, borrow flag M1021 = On.
c) If the operation result > 32,767, carry flag M1022 = On.
In 32-bit instruction:
a) If the operation result = 0, zero flag M1020 = On.
b) If the operation result < –2,147,483,648, borrow flag M1021 = On.
c) If the operation result > 2,147,483,647, carry flag M1022 = On.

7.

For flag operations of SUB instruction and the positive/negative sign of the value, see the explanations in ADD
instruction on the previous page.

Program Example 1:
In 16-bit BIN subtraction:
When X0 = On, the content in D0 will minus the content in D10 and the remainder will be stored in D20.
X0
SUB

D0

D10

D20

Program Example 2:
In 32-bit BIN subtraction:
When X10 = On, the content in (D31, D30) will minus the content in (D41, D40) and the remainder will be stored in
(D51, D50). D30, D40 and D50 are low 16-bit data; D31, D41 and D51 are high 16-bit data.
X10
DSUB

D30

D40

D50

(D31, D30) − (D41, D40) = (D51, D50)
6-36

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

22

D
Type

MUL

Function
Multiplication

P

Bit Devices
X

OP

Operands

Y

M

Word Devices

S

K H KnX KnY KnM KnS
* *
*
*
*
*
* *
*
*
*
*
*
*
*

S1
S2
D

Program Steps

T C D E F MUL, DMULP: 7 steps
* * * * * DMUL, DMULP: 13 steps
* * * * *
* * * *

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Multiplicand

S2: Multiplicator

D: Product

Explanations:
1.

If S1 and S2 are used in device F, only 16-bit instruction is applicable.

2.

If D is used in device E, only 16-bit instruction is applicable.

3.

In 16-bit instruction, D occupies 2 consecutive devices.

4.

In 32-bit instruction, D occupies 4 consecutive devices.

5.

See the specifications of each model for their range of use.

6.

This instruction multiplies S1 by S2 in BIN format and stores the result in D. Be careful with the positive/negative
signs of S1, S2 and D when doing 16-bit and 32-bit operations.

7.

In 16-bit BIN multiplication,
+1
b15................ b00

b15................ b00

b15 is a symbol bit

b31............ b16 b15............. b00

=

X
b15 is a symbol bit

b31 is a symbol bit (b15 of D+1)

Symbol bit = 0 refers to a positive value.
Symbol bit = 1 refers to a negative value.

When D serves as a bit device, it can designate K1 ~ K4 and construct a 16-bit result, occupying consecutive 2
groups of 16-bit data. ES/EX/SS only stores low 16-bit data.
8.

32-bit BIN multiplication,
+1

+1
b31.. b16 b15.. b00

+3

b31.. b16 b15.. b00

+1

b63. b48 b47. b32 b31. b16 b15. b00

=

X
b31 is a symbol bit

+2

b31 is a symbol bit

b63 is a symbol bit (b15 of D+3 )

Symbol bit = 0 refers to a positive value.
Symbol bit = 1 refers to a negative value.

When D serves as a bit device, it can designate K1 ~ K8 and construct a 32-bit result, occupying consecutive 2
groups of 32-bit data.
Program Example:
The 16-bit D0 is multiplied by the 16-bit D10 and brings forth a 32-bit product. The higher 16 bits are stored in D21

DVP-PLC Application Manual

6-37

6 Application Instructions API 00-49
and the lower 16-bit are stored in D20. On/Off of the most left bit indicates the positive/negative status of the result
value.
X0

6-38

MUL

D0

D10

D20

MUL

D0

D10

K8M0

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

23

D

Operands

DIV

Type

Division

P

Bit Devices
X

OP

Function

Y

M

S

S1
S2
D

Word Devices
K H KnX KnY KnM KnS
* *
*
*
*
*
* *
*
*
*
*
*
*
*

Program Steps

T C D E F DIV, DIVP: 7 steps
* * * *
DDIV, DDIVP: 13 steps
* * * *
* * * *

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Dividend

S2: Divisor

D: Quotient and remainder

Explanations:
1.

If S1 and S2 are used in device F, only 16-bit instruction is applicable.

2.

If D is used in device E, only 16-bit instruction is applicable.

3.

In 16-bit instruction, D occupies 2 consecutive devices.

4.

In 32-bit instruction, D occupies 4 consecutive devices.

5.

See the specifications of each model for their range of use.

6.

This instruction divides S1 and S2 in BIN format and stores the result in D. Be careful with the positive/negative
signs of S1, S2 and D when doing 16-bit and 32-bit operations.

7.

This instruction will not be executed when the divisor is 0. M1067 and M1068 will be On and D1067 records the
error code 0E19 (hex).

8.

In 16-bit BIN division,
Quotient

Remainder
+1

/

=

When D serves as a bit device, it can designate K1 ~ K4 and construct a 16-bit result, occupying consecutive 2
groups of 16-bit data and bringing forth the quotient and remainder. ES/EX/SS is able to bring forth only quotient
without the remainder.
9. In 32-bit BIN division,
Quotient
+1

+1

/

+1

Remainder
+3

+2

=

When D serves as a bit device, it can designate K1 ~ K8 and construct a 32-bit result, occupying consecutive 2
groups of 32-bit data and bringing forth the quotient and remainder.
Program Example:
When X0 = On, D0 will be divided by D10 and the quotient will be stored in D20 and remainder in D21. On/Off of the
highest bit indicates the positive/negative status of the result value.

DVP-PLC Application Manual

6-39

6 Application Instructions API 00-49
X0

6-40

DIV

D0

D10

D20

DIV

D0

D10

K4Y0

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

24

D
Type

INC

Function
Increment

P

Bit Devices
X

OP

Operands

Y

M

S

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F INC, INCP: 3 steps

D

*
PULSE
ES EX SS SA SX SC EH SV

*

*

*

*

*

*

* DINC, DINCP: 5 steps

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Destination device
Explanations:
1.

If D is used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

If the instruction is not a pulse execution one, the content in the designated device D will plus “1” in every scan
period whenever the instruction is executed.

4.

This instruction adopts pulse execution instructions (INCP, DINCP).

5.

In 16-bit operation, 32,767 pluses 1 and obtains -32,768. In 32-bit operation, 2,147,483,647 pluses 1 and
obtains -2,147,483,648.

6.

The operation results will not affect M1020 ~ M1022.

Program Example:
When X0 = Off→On, the content in D0 pluses 1 automatically.
X0
INCP

DVP-PLC Application Manual

D0

6-41

6 Application Instructions API 00-49
API

Mnemonic

25

D
Type

DEC

Y

Function
Decrement

P

Bit Devices
X

OP

Operands

M

S

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E

D

*
PULSE
ES EX SS SA SX SC EH SV

*

*

*

*

*

*

F DEC, DECP: 3 steps
* DDEC, DDECP: 5 steps

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Destination device
Explanations:
1.

If D is used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

If the instruction is not a pulse execution one, the content in the designated device D will minus “1” in every scan
period whenever the instruction is executed.

4.

This instruction adopts pulse execution instructions (DECP, DDECP).

5.

In 16-bit operation, -32,768 minuses 1 and obtains 32,767. In 32-bit operation, -2,147,483,648 minuses 1 and
obtains 2,147,483,647.

6.

The operation results will not affect M1020 ~ M1022.

Program Example:
When X0 = Off→On, the content in D0 minuses 1 automatically.
X0
DECP

6-42

D0

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic
W
D

26

AND

Type

Y

Function
Logical Word AND

P

Bit Devices
X

OP

Operands

M

S

S1
S2
D

Word Devices
K H KnX KnY KnM KnS
* *
*
*
*
*
* *
*
*
*
*
*
*
*

Program Steps

T C D E F WAND, WANDP: 7 steps
* * * * * DAND, DANDP: 13 steps
* * * * *
* * * * *

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Source data device 1

S2: Source data device 2

D: Operation result

Explanations:
1.

If S1, S2 and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

This instruction conducts logical AND operation of S1 and S2 and stores the result in D.

4.

Operation rule: The corresponding bit of the operation result in D will be “0” if any of the bits in S1 or S2 is “0”.

Program Example 1:
When X0 = On, the 16-bit D0 and D2 will perform WAND, logical AND operation, and the result will be stored in D4.
X0
D0

WAND

D2

D4

b0
b15
D0 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1
WAND

Before
execution

D2 0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0

After
execution

D4 0 0 0 1 0 0 1 0 0 0 0 0 0 1 0 0

Program Example 2:
When X1 = On, the 32-bit (D11, D10) and (D21, D20) will perform DAND, logical AND operation, and the result will be
stored in (D41, D40).
X1
DAND

Before
execution

After
execution

D10

D20

D40

b31
b15
b0
D11 D10 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1
DAND
D21 D20 0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0

0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0

D41 D40 0 0 0 1 0 0 1 0 0 0 0 0 0 1 0 0

0 0 0 1 0 0 1 0 0 0 0 0 0 1 0 0

DVP-PLC Application Manual

6-43

6 Application Instructions API 00-49
API

Mnemonic
W
D

27

OR

Type

Y

M

Function
Logical Word OR

P

Bit Devices
X

OP

Operands

Word Devices

S

K H KnX KnY KnM KnS
* *
*
*
*
*
* *
*
*
*
*
*
*
*

S1
S2
D

Program Steps

T C D E
* * * *
* * * *
* * * *

F WOR, WORP: 7 steps
* DOR, DORP: 13 steps
*
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Source data device 1

S2: Source data device 2

D: Operation result

Explanations:
1.

If S1, S2 and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

This instruction conducts logical OR operation of S1 and S2 and stores the result in D.

4.

Operation rule: The corresponding bit of the operation result in D will be “1” if any of the bits in S1 or S2 is “1”.

Program Example 1:
When X0 = On, the 16-bit D0 and D2 will perform WOR, logical OR operation, and the result will be stored in D4.
X0
WOR

D0

D2

D4

b0
b15
D0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
WOR

Before
execution

D2 0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1

After
execution

D4 0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1

Program Example 2:
When X1 = On, the 32-bit (D11, D10) and (D21, D20) will perform DOR, logical OR operation, and the result will be
stored in (D41, D40).
X1
DOR

D10

D20

D40

b31
Before
execution
After
execution

6-44

b15

b0

D11 D10

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
DOR

D21 D20

0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1

0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1

D41 D40 0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1

0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic
W
D

28

XOR

Type

Y

Function
Logical Exclusive OR

P

Bit Devices
X

OP

Operands

M

Word Devices

S

K H KnX KnY KnM KnS
* *
*
*
*
*
* *
*
*
*
*
*
*
*

S1
S2
D

Program Steps

T C D E F WXOR, WXORP: 7 steps
* * * * * DXOR, DXORP: 13 steps
* * * * *
* * * * *

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Source data device 1

S2: Source data device 2

D: Operation result

Explanations:
1.

If S1, S2 and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

This instruction conducts logical XOR operation of S1 and S2 and stores the result in D.

4.

Operation rule: If the bits in S1 and S2 are the same, the corresponding bit of the operation result in D will be “0”;
if the bits in S1 and S2 are different, the corresponding bit of the operation result in D will be “1”.

Program Example 1:
When X0 = On, the 16-bit D0 and D2 will perform WXOR, logical XOR operation, and the result will be stored in D4.
X0
WXOR

D0

D2

D4

b15

b0

D0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
WOR

Before
execution

D2 0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1

After
execution

D4 0 1 0 1 1 0 1 0 1 1 1 1 0 0 0 0

Program Example 2:
When X1 = On, the 32-bit (D11, D10) and (D21, D20) will perform DXOR, logical XOR operation, and the result will be
stored in (D41, D40).
X1
DXOR

Before
execution

After
execution

D11 D10

D10

D20

D40

b15
b31
1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0
DXOR

b0
1 1 1 1

0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0

0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0

D41 D40 1 1 1 0 1 1 0 1 0 0 1 1 1 0 1 1

1 1 1 0 1 1 0 1 0 0 1 1 1 0 1 1

D21 D20

DVP-PLC Application Manual

6-45

6 Application Instructions API 00-49
API

Mnemonic

29

D

NEG

Type

Y

Function
2’s Complement (Negative)

P

Bit Devices
X

OP

Operands

M

S

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E

D

*
PULSE
ES EX SS SA SX SC EH SV

*

*

*

*

*

*

F NEG, NEGP: 3 steps
* DNEG, DNEGP: 5 steps

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device to store 2’s complement
Explanations:
1.

If D is used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

This instruction converts a negative BIN value into an absolute value.

4.

This instruction adopts pulse execution instructions (NEGP, DNEGP).

Program Example 1:
When X0 = Off→On, the phase of every bit of the content in D10 will be reversed (0→1, 1→0) and pluses 1. The
result will then be stored in D10.
X0
NEGP

D10

Program Example 2:
Obtaining the absolute value of a negative value:
a) When the 15th bit of D0 is “1”, M0 = On. (D0 is a negative value).
b) When M0 = Off→On, NEG instruction will obtain 2’s complement of D0 and further its absolute value.
M1000
BON

D0

NEGP

D0

M0

K15

Normal ON contact
M0

Program Example 3:
Obtaining the absolute value by the remainder of the subtraction. When X0 = On,
a) If D0 > D2, M0 = On.
b) If D0 = D2, M1 = On.
c) If D0 < D2, M2 = On.
d) D4 is then able to remain positive.

6-46

DVP-PLC Application Manual

6 Application Instructions API 00-49
X0
CMP

D0

D2

M0

SUB

D0

D2

D4

SUB

D2

D0

D4

M0
M1
M2

Remarks:
Negative value and its absolute value
a) The sign of a value is indicated by the highest (most left) bit in the register. 0 indicates that the value is a positive
one and 1 indicates that the value is a negative one.
b) NEG instruction is able to convert a negative value into its absolute value.
(D0=2)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
(D0=1)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
(D0=0)
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
(D0=-1)
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
(D0=-2)
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0
(D0=-3)
1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1
(D0=-4)
1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0
(D0=-5)

(D0)+1=1
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
(D0)+1=2
0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
(D0)+1=3
0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1
(D0)+1=4
0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0

1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1

(D0)+1=5
0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1

(D0=-32,765)
1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1

(D0)+1=32,765
0 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1

(D0=-32,766)
1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0

(D0)+1=32,766
0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0

(D0=-32,767)

(D0)+1=32,767
0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
(D0=-32,768)
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

(D0)+1=-32,768
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Max. absolute value is 32,767

DVP-PLC Application Manual

6-47

6 Application Instructions API 00-49
API

Mnemonic

30

D

Operands

ROR

Type

Rotation Right

P

Bit Devices
X

OP

Y

Function

M

Word Devices

S

D
n

Program Steps

K H KnX KnY KnM KnS T C D E
*
*
*
* * * *
* *

F ROR, RORP: 5 steps
* DROR, DRORP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device to be rotated

n: Number of bits to be rotated in 1 rotation

Explanations:
1.

If D is used in device F, only 16-bit instruction is applicable.

2.

If D is designated as KnY, KnM, and KnS, only K4 (16-bit) and K8 (32-bit) are valid.

3.

Range of n: K1 ~ K16 (16-bit); K1 ~ K32 (32-bit)

4.

See the specifications of each model for their range of use.

5.

Flag: M1022 (carry flag)

6.

This instruction rotates the device content designated by D to the right for n bits.

7.

This instruction adopts pulse execution instructions (RORP, DRORP).

Program Example:
When X0 = Off→On, the 16 bits (4 bits as a group) in D10 will rotate to the right, as shown in the figure below. The bit
marked with ※ will be sent to carry flag M1022.
X0
RORP

D10

K4

Rotate to the right
h igher bit

lower bit
Carry
flag

D10 0 1 1 1 1 0 1 1 0 1 0 0 0 1 0 1

h igher bit

16 bits
After one rotation
to the right

lower bit

D10 0 1 0 1 0 1 1 1 1 0 1 1 0 1 0 0

6-48

0

Carry
flag

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

31

D
Type

ROL

Y

Function
Rotation Left

P

Bit Devices
X

OP

Operands

M

Word Devices

S

D
n

Program Steps

K H KnX KnY KnM KnS T C D E F ROL, ROLP: 5 steps
*
*
*
* * * * * DROL, DROLP: 9 steps
* *
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device to be rotated

n: Number of bits to be rotated in 1 rotation

Explanations:
1.

If D is used in device F, only 16-bit instruction is applicable.

2.

If D is designated as KnY, KnM, and KnS, only K4 (16-bit) and K8 (32-bit) are valid.

3.

Range of n: K1 ~ K16 (16-bit); K1 ~ K32 (32-bit)

4.

See the specifications of each model for their range of use.

5.

Flag: M1022 (carry flag)

6.

This instruction rotates the device content designated by D to the left for n bits.

7.

This instruction adopts pulse execution instructions (ROLP, DROLP).

Program Example:
When X0 = Off→On, the 16 bits (4 bits as a group) in D10 will rotate to the left, as shown in the figure below. The bit
marked with ※ will be sent to carry flag M1022.
X0
D10

K4

Rotate to the left
higher bit

lower bit

1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Carry
flag
higher bit
1

16 bits
After one rotation
to the left
lower bit

1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1

Carry
flag

DVP-PLC Application Manual

D10

D10

6-49

6 Application Instructions API 00-49
API

Mnemonic

32

D
Type

RCR

Y

M

Function
Rotation Right with Carry

P

Bit Devices
X

OP

Operands

Word Devices

S

D
n

Program Steps

K H KnX KnY KnM KnS T C D E
*
*
*
* * * *
* *

F RCR, RCRP: 5 steps
* DRCR, DRCRP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device to be rotated

n: Number of bits to be rotated in 1 rotation

Explanations:
1.

If D is used in device F, only 16-bit instruction is applicable.

2.

If D is designated as KnY, KnM, and KnS, only K4 (16-bit) and K8 (32-bit) are valid.

3.

Range of n: K1 ~ K16 (16-bit); K1 ~ K32 (32-bit)

4.

See the specifications of each model for their range of use.

5.

Flag: M1022 (carry flag)

6.

This instruction rotates the device content designated by D together with carry flag M1022 to the right for n bits.

7.

This instruction adopts pulse execution instructions (RCRP, DRCRP).

Program Example:
When X0 = Off→On, the 16 bits (4 bits as a group) in D10 together with carry flag M1022 (total 17 bits) will rotate to
the right, as shown in the figure below. The bit marked with ※ will be sent to carry flag M1022.
X0
D10

K4

Rotate to the right
lower bit
higher bit
0
0
0
0
1
1
1
1
0
0
0
0
0
1
1 0
D10

1
Carry
flag

16 bits
After one rotation
to the right
higher bit
lower bit
D10 1 1 0 1 0 0 0 0 1 1 1 1 0 0 0 0

0
Carry
flag

6-50

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

33

D
Type

RCL

Y

M

Function
Rotation Left with Carry

P

Bit Devices
X

OP

Operands

Word Devices

S

D
n

Program Steps

K H KnX KnY KnM KnS T C D E F RCL, RCLP: 5 steps
*
*
*
* * * * * DRCL, DRCLP: 9 steps
* *
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device to be rotated

n: Number of bits to be rotated in 1 rotation

Explanations:
1.

If D is used in device F, only 16-bit instruction is applicable.

2.

If D is designated as KnY, KnM, and KnS, only K4 (16-bit) and K8 (32-bit) are valid.

3.

Range of n: K1 ~ K16 (16-bit); K1 ~ K32 (32-bit)

4.

See the specifications of each model for their range of use.

5.

Flag: M1022 (carry flag)

6.

This instruction rotates the device content designated by D together with carry flag M1022 to the left for n bits.

7.

This instruction adopts pulse execution instructions (RCLP, DRCLP).

Program Example :
When X0 = Off→On, the 16 bits (4 bits as a group) in D10 together with carry flag M1022 (total 17 bits) will rotate to
the left, as shown in the figure below. The bit marked with ※ will be sent to carry flag M1022.
X0
RCLP

D10

K4

Rotate to the left

Carry
flag

lower bit
higher bit
1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 D10

higher bit

16 bits
After one rotation
to the left

lower bit
1 1 1 1 0 0 0 0 0 0 0 0 0 1 1 1 D10

Carry
flag

DVP-PLC Application Manual

6-51

6 Application Instructions API 00-49
API

Mnemonic

34

SFTR
Type
S
D
n1
n2

Y
*
*

Function
Bit Shift Right

P

Bit Devices
X
*

OP

Operands

M
*
*

Word Devices

S
*
*

Program Steps

K H KnX KnY KnM KnS T C D E

*
*

F SFTR, SFTRP: 9 steps

*
*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start No. of the shifted device

D: Start No. of the device to be shifted

n1: Length of data to be shifted

n2: Number of bits to be shifted in 1 shift
Explanations:
1.

Range of n1: 1~ 1,024

2.

Range of n2: 1 ~ n1

3.

In ES/EX/SS, 1 ≤ n2 ≤ n1 ≤ 512

4.

ES/EX/SS series MPU does not support E, F index register modification.

5.

See the specifications of each model for their range of use.

6.

This instruction shifts the bit device of n1 bits (desired length for shifted register) starting from D to the right for n2
bits. S is shifted into D for n2 bits to supplement empty bits.

7.

This instruction adopts pulse execution instructions (SFTRP).

Program Example:
1.

When X0 = Off→On, M0 ~M15 will form 16 bits and shifts to the right (4 bits as a group).

2.

The figure below illustrates the right shift of the bits in one scan.
n M3 ~ M0

→

carry

o M7 ~ M4

→

M3 ~ M0

p M11 ~ M8 →

M7 ~ M4

q M15 ~ M12 →

M11 ~ M8

r X3 ~ X0

→ M15 ~ M12 completed

X0
SFTR

X0

M0

K16

K4

4 bits as a group shifting to the right
X3

X2

X1

X0

5
M15 M14 M13 M12 M11

4

6-52

M10

M9

M8

M7

3

M6

M5

M4

M3

2

M2

M1

carry

M0

1

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

35

SFTL
Type

Operands
Bit Shift Left

P

Bit Devices
X
*

OP
S
D
n1
n2

Y
*
*

Function

M
*
*

Word Devices

S
*
*

Program Steps

K H KnX KnY KnM KnS T C D E F SFTL, SFTLP: 9 steps

*
*

*
*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start No. of the shifted device

D: Start No. of the device to be shifted

n1: Length of data to be shifted

n2: Number of bits to be shifted in 1 shift
Explanations:
1.

Range of n1: 1~ 1,024

2.

Range of n2: 1 ~ n1

3.

In ES/EX/SS, 1 ≤ n2 ≤ n1 ≤ 512

4.

ES/EX/SS series MPU does not support E, F index register modification.

5.

See the specifications of each model for their range of use.

6.

This instruction shifts the bit device of n1 bits (desired length for shifted register) starting from D to the left for n2
bits. S is shifted into D for n2 bits to supplement empty bits.

7.

This instruction adopts pulse execution instructions (SFTLP).

Program Example:
1.

When X0 = Off→On, M0 ~M15 will form 16 bits and shifts to the left (4 bits as a group).

2.

The figure below illustrates the left shift of the bits in one scan.
n M15 ~ M12 →

carry

o M11 ~ M8

→

M15 ~ M12

p M7 ~ M4

→

M11 ~ M8

q M3 ~ M0

→

M7 ~ M4

r X3 ~ X0

→ M3 ~ M0 completed

X0
SFTR

X0

M0

K16

K4

4 bits as a group shifting to the left

carry

X3

X2

X1

X0

M3

M2

M1

M0

5
M15 M14 M13 M12 M11

1

2

DVP-PLC Application Manual

M10

M9

M8

M7

3

M6

M5

M4

4

6-53

6 Application Instructions API 00-49
API

Mnemonic

36

WSFR
Type

Y

M

Function
Word Shift Left

P

Bit Devices
X

OP

Operands

S

S
D
n1
n2

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E
*
*
*
*
* * *
*
*
*
* * *
* *
* *

F WSFR, WSFRP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start No. of the shifted device

D: Start No. of the device to be shifted

n1: Length of data to be shifted

n2: Number of words to be shifted in 1 shift
Explanations:
1.

The type of devices designated by S and D has to be the same, e.g. KnX, KnY, KnM, and KnS as a category and
T, C, and D as another category.

2.

Provided the devices designated by S and D belong to Kn type, the number of digits of Kn has to be the same.

3.

Range of n1: 1~ 512

4.

Range of n2: 1 ~ n1

5.

See the specifications of each model for their range of use.

6.

This instruction shifts the stack data of n1 words starting from D to the right for n2 words. S is shifted into D for n2
words to supplement empty words.

7.

This instruction adopts pulse execution instructions (WSFRP)

Program Example 1:
1.

When X0 = Off→On, the 16 register stack data composed of D20 ~ D35 will shift to the right for 4 registers.

2.

The figure below illustrates the right shift of the words in one scan.
n D23 ~ D20 → carry
o D27 ~ D24 → D23 ~ D20
p D31 ~ D28 → D27 ~ D24
q D35 ~ D32 → D31 ~ D28
r D13 ~ D10 → D35 ~ D32 completed
X0
WSFRP

D10

D13

D12

D11

D35

D34

D33 D32

D20

K16

K4

Right-shifting for 4 registers

D10

5
D31 D30 D29

4

6-54

D28

D27 D26

3

D25

D24 D23

2

D22

D21 D20

Carry

1

DVP-PLC Application Manual

6 Application Instructions API 00-49

Program Example 2:
1.

When X0 = Off→On, the bit register stack data composed of Y10 ~ Y27 will shift to the right for 2 digits.

2.

The figure below illustrates the right shift of the words in one scan.
n Y17 ~ Y10 → carry
o Y27 ~ Y20 → Y17 ~ Y10
p X27 ~ X20 → Y27 ~ Y20 completed
When using Kn type device, please designate the same number of digits.

X0

WSFRP K1X20 K1Y10

K4

K2

X27

X26

X25

X24

X23

X22

X21

Y27

Y26

Y25

Y24

Y23

Y22

Y21 Y20

Right-shifting for 2 digits

X20

3
Y17

2

DVP-PLC Application Manual

Y16

Y15

Y14 Y13

Y12

Y11 Y10

Carry

1

6-55

6 Application Instructions API 00-49
API

Mnemonic

37

WSFL
Type

Operands
Word Shift Left

P

Bit Devices
X

OP

Y

Function

M

S

S
D
n1
n2

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E
*
*
*
*
* * *
*
*
*
* * *
* *
* *

F WSFL, WSFLP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start No. of the shifted device

D: Start No. of the device to be shifted

n1: Length of data to be shifted

n2: Number of words to be shifted in 1 shift
Explanations:
1.

The type of devices designated by S and D has to be the same, e.g. KnX, KnY, KnM, and KnS as a category and
T, C, and D as another category.

2.

Provided the devices designated by S and D belong to Kn type, the number of digits of Kn has to be the same.

3.

Range of n1: 1~ 512

4.

Range of n2: 1 ~ n1

5.

See the specifications of each model for their range of use.

6.

This instruction shifts the stack data of n1 words starting from D to the left for n2 words. S is shifted into D for n2
words to supplement empty words.

7.

This instruction adopts pulse execution instructions (WSFLP)

Program Example:
1.

When X0 = Off→On, the 16 register stack data composed of D20 ~ D35 will shift to the left for 4 registers.

2.

The figure below illustrates the left shift of the words in one scan.
n D35 ~ D32 → carry
o D31 ~ D28 → D35 ~ D32
p D27 ~ D24 → D31 ~ D28
q D23 ~ D20 → D27 ~ D24
r D13 ~ D10 → D23 ~ D20 completed
X0
WSFLP

D10

D20

K16

K4

Left-shifiting for 4 registers

D13

D12

D11

D24 D23

D22

D21 D20

D10
5

Carry D35

1

6-56

D34

D33 D32

D31 D30 D29

2

D28

D27 D26

3

D25

4

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

38

SFWR
Type

Y

Function
Shift Register Write

P

Bit Devices
X

OP

Operands

M

Word Devices

S

Program Steps

K H KnX KnY KnM KnS T C D E F SFWR, SFWRP: 7 steps
* *
*
*
*
*
* * * * *
*
*
*
* * *
* *

S
D
n

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Device of stack data written in

D: Start No. of stack data

n: Length of stack data

Explanations:
1.

Range of n: 2 ~ 512

2.

See the specifications of each model for their range of use.

3.

Flag: M1022 (carry flag)

4.

The stack data of n words starting from D are defined as “first-in, first-out” stack data and designate the first
device as the pointer. When the instruction is executed, the content in the pointer pluses 1, and the content in
the device designated by S will be written into the designated location in the “first-in, first-out” stack data
designated by the pointer. When the content in the pointer exceeds n - 1, this instruction will not process any
new value written in and the carry flag M1022 = On.

5.

This instruction adopts pulse execution instructions (SFWRP)

Program Example:
1.

Pointer D0 is reset as 0. When X0 = Off→On, the content in D20 will be sent to D1 and the content in pointer D0
becomes 1. After the content in D20 is changed, make X0 = Off→On again, and the content in D2 will be sent to
D2 and the content in D0 becomes 2.

2.

The figure below illustrates the shift and writing in 1~2 execution of the instruction.
n The content in D20 is sent to D1.
o The content in pointer D0 becomes 1.
X10
RST

D0

SFWRP

D20

Reset the content of D0 as 0 in advance

X0
K10

D0

n = 10 points
D20

D9

D8

D7

D6

D5

D4

D0 =

D3

D2

D1

3

2

1

D0
pointer

Remarks:
This instruction can be used together with API 39 SFRD for the reading/writing of “first-in, first-out” stack data.

DVP-PLC Application Manual

6-57

6 Application Instructions API 00-49
API

Mnemonic

39

SFRD
Type

Y

Function
Shift Register Read

P

Bit Devices
X

OP

Operands

M

Word Devices

S

Program Steps

K H KnX KnY KnM KnS T C D E
*
*
*
* * *
*
*
*
* * * *
* *

S
D
n

F SFRD, SFRDP: 7 steps
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start No. of stack data

D: Device of stack data read out

n: Length of stack data

Explanations:
1.

Range of n: 2 ~ 512

2.

See the specifications of each model for their range of use.

3.

Flag: M1020 (zero flag)

4.

The stack data of n words starting from S are defined as “first-in, first-out” stack data. After the content in S
minuses 1, the content in the device designated by (S + 1) will be written into the location designated by D, and
(S + n-1) ~ (S + 2) will all right shift for one register while the content in (S + n-1) remains the same. When the
content in S equals 0, this instruction will not process any new value read out and the zero flag M1020 = On.

5.

This instruction adopts pulse execution instructions (SFRDP)

Program Example:
1.

When X0 = Off→On, the content in D1 will be sent to D21 and D9~D2 will shift to the right for 1 register (content
in D9 remains unchanged) and the content in D0 minus 1.

2.

The figure below illustrates the shift and reading in 1~3 execution of the instruction.
n The content in D1 is sent to D21.
o D9 ~ D2 shift to the right for 1 register.
p The content in D0 minuses 1.
X0
D0

SFRDP

D21

K10

n = 10 points
D9

D8

D7

D6

D5

D4

D3

D2

D1

D0

D21

pointer
data read

Remarks:
This instruction can be used together with API 38 SFWR for the reading/writing of “first-in, first-out” stack data.

6-58

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

40

ZRST
Type

Function
Zero Reset

P

Bit Devices
X

OP

Operands

D1
D2

Y
*
*

M
*
*

S
*
*

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F ZRST, ZRSTP: 5 steps
* * *
* * *
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D1: Start device of the range to be reset

D2: End device of the range to be reset

Explanations:
1.

No. of operand D1 ≤ No. of operand D2.

2.

D1 and D2 have to designate devices of the same type.

3.

ES/EX/SS series MPU does not support E, F index register modification.

4.

See the specifications of each model for their range of use.

5.

When the instruction is executed, area from D1 to D2 will be cleared.

6.

In ES/EX/SS, 16-bit counter and 32-bit counter cannot use ZRST instruction together.

7.

In SA/EH, 16-bit counter and 32-bit counter can use ZRST instruction together.

8.

When D1 > D2, only operands designated by D2 will be reset.

Program Example:
1.

When X0 = On, auxiliary relays M300 ~ M399 will be reset to Off.

2.

When X1 = On, 16 counters C0 ~ C127 will all be reset (writing in 0; contact and coil being reset to Off).

3.

When X10 = On, timers T0 ~ T127 will all be reset (writing in 0; contact and coil being reset to Off).

4.

When X2 = On, steps S0 ~ S127 will be reset to Off.

5.

When X3 = On, data registers D0 ~ D100 will be reset to 0.

6.

When X4 = On, 32-bit counters C235 ~ C254 will all be reset. (writing in 0; contact and coil being reset to Off)
X0
ZRST

M300

M399

ZRST

C0

C127

ZRST

T0

T127

ZRST

S0

S127

ZRST

D0

D100

ZRST

C235

C254

X1
X10
X2
X3
X4

Remarks:
1.

Devices, e.g. bit devices Y, M, S and word devices T, C, D, can use RST instruction.

2.

API 16 FMOV instruction is also to send K0 to word devices T, C, D or bit registers KnY, KnM, KnS for reset.

DVP-PLC Application Manual

6-59

6 Application Instructions API 00-49
X0

6-60

RST

M0

RST

T0

RST

Y0

FMOV

K0

D10

K5

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

41

DECO
Type
S
D
n

Function
Decode

P

Bit Devices
X
*

OP

Operands

Y
*
*

M
*
*

Word Devices

S
*
*

Program Steps

K H KnX KnY KnM KnS T C D E F DECO, DECOP: 7 steps
* *
* * * * *
* * * * *
* *
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device to be decoded

D: Device for storing the decoded result

n: Length of decoded bits

Explanations:
1.

Range of n when D is a bit device: 1 ~ 8

2.

Range of n when D is a word device: 1 ~ 4

3.

ES/EX/SS series MPU does not support E, F index register modification.

4.

See the specifications of each model for their range of use.

5.

The lower “n” bits of S are decoded and the results of “2n” bits are stored in D.

6.

This instruction adopts pulse execution instructions (DECOP)

Program Example 1:
1.

When D is used as a bit device, n = 1 ~ 8. Errors will occur if n = 0 or n > 8.

2.

When n = 8, the maximum points to decode is 28 = 256 points. (Please be aware of the storage range of the
devices after the decoding and do not use the devices repeatedly.)

3.

When X10 = Off→On, this instruction will decode the content in X0 ~ X2 to M100 ~ M107.

4.

When the source of data is 1 + 2 = 3, set M103, the 3rd bit starting from M100, as 1.

5.

After the execution of this instruction is completed and X10 turns to Off, the content that has been decoded and
output keeps acting.
X10
DECOP

7
0

6
0

D10

X2

X1

X0

0

1

1

4

2

1

5
0

4
0

3
3
1

D20

2
0

K3

1
0

0
0

M107 M106 M105 M104 M103 M102 M101 M100

Program Example 2:
1.

When D is used as a word device, n = 1 ~ 4. Errors will occur if n = 0 or n > 4.

2.

When n = 4, the maximum points to decode is 24 = 16 points.

DVP-PLC Application Manual

6-61

6 Application Instructions API 00-49
3.

When X10 = Off→On, this instruction will decode b2 ~ b0 in D10 to b7 ~ b0 in D20. b15 ~ b8 that have not been
used in D20 will all become 0.

4.

The lower 3 bits of D10 are decoded and stored in the lower 8 bits of D20. The higher 8 bits of D20 are all 0.

5.

After the execution of this instruction is completed and X10 turns to Off, the content that has been decoded and
output keeps acting.
X10
DECOP

D10

K3

D10

b15
0

D20

1

0

1

0

1

0

1

0

0

0

1

0

0
4

b0
1 1
2 1

0

1

0

7

6

5

4

3

2

1

0

0

0

0

0

1

0

0

0

all be 0
0
b15

6-62

0

0

0

0

D20

b0

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

42

ENCO
Type
S
D
n

Y
*

Function
Encode

P

Bit Devices
X
*

OP

Operands

M
*

Word Devices

S
*

Program Steps

K H KnX KnY KnM KnS T C D E F ENCO, ENCOP: 7 steps
* * * * *
* * * * *
* *
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device to be encoded

D: Device for storing the encoded result

n: Length of encoded bits

Explanations:
1.

Range of n when S is a bit device: 1 ~ 8

2.

Range of n when S is a word device: 1 ~ 4

3.

ES/EX/SS series MPU does not support E, F index register modification.

4.

See the specifications of each model for their range of use.

5.

The lower “2n” bits of S are encoded and the result is stored in D.

6.

If several bits of S are 1, the first bit that is 1 will be processed orderly from high bit to low bit.

7.

If no bits of S is 1, M1067, M1068 = On and D1067 records the error code 0E1A (hex).

8.

This instruction adopts pulse execution instructions (ENCOP)

Program Example 1:
1.

When S is used as a bit device, n = 1 ~ 8. Errors will occur if n = 0 or n > 8.

2.

When n = 8, the maximum points to encode is 28 = 256 points.

3.

When X10 = Off→On, this instruction will encode the 23 bits data (M0 ~ M7) and store the result in the lower 3
bits (b2 ~ b0) of D0. b15 ~ b3 that have not been used in D0 will all become 0.

4.

After the execution of this instruction is completed and X10 turns to Off, the content in D remains unchanged.
X0
ENCOP

M0

K3

D0

M7

M6

M5

M4

M3

M2

M1

M0

0
7

0
6

0
5

0
4

1
3

0
2

0
1

0
0

all be 0
0 0
b15

0

0

0

0

0

4 2 1
0

0

D0

0

0

0

0

0

1

1
b0

Program Example 2:
1.

When S is used as a word device, n = 1 ~ 4. Errors will occur if n = 0 or n > 4.

2.

When n = 4, the maximum points to decode is 24 = 16 points.

DVP-PLC Application Manual

6-63

6 Application Instructions API 00-49
3.

When X10 = Off→On, this instruction will encode 23 bits (b0 ~ b7) in D10 and stores the result in the lower 3 bits
(b2 ~ b0) of D20. b15 ~ b3 that have not been used in D20 will all become 0. b8 ~ b15 of D10 are invalid data.

4.

After the execution of this instruction is completed and X10 turns to Off, the content in D remains unchanged.
X0
ENCOP

D10

K3

D20

Invalid data
b0
0

1

0

1

0

1

b15

0

1

D10

0

0
6

0
5

0
4

1
3

0
2

0
1

0

0

0

0

0

1

0
0

7

all be 0
0 0
b15

6-64

0

0

0

0

0

0

D20

0

1
b0

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

43

D

SUM

Type

Y

Function
Sum of Active Bits

P

Bit Devices
X

OP

Operands

M

Word Devices

S

Program Steps

K H KnX KnY KnM KnS T C D E F SUM, SUMP: 5 steps
* *
*
*
*
*
* * * * * DSUM, DSUMP: 9 steps
*
*
*
* * * * *

S
D

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device

D: Destination device for storing counted value

Explanations:
1.

If S and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

Flag: M1020 (zero flag)

4.

Among the bits of S, the total of bits whose content is “1” will be stored in D.

5.

When all the 16 bits of S are “0”, zero flag M1020 = On.

6.

When 32- instruction is in use, D will occupy 2 registers.

Program Example:
When X10 = On, among the 16 bits of D0, the total of bits whose content is “1” will be stored in D2.
X10
SUM

0

0

0

1

0

0

D0

1

DVP-PLC Application Manual

0 0
D0

D2

0

0

0

0

1

0

0

K3
D2

6-65

6 Application Instructions API 00-49
API

Mnemonic

44

D
Type

BON

S
D
n

Function
Check Specified Bit Status

P

Bit Devices
X

OP

Operands

Word Devices

Y

M

S

*

*

*

Program Steps

K H KnX KnY KnM KnS T C D E
* *
*
*
*
*
* * * *

F BON, BONP: 7 steps
* DBON, DBONP: 13 steps

*

*

*

*

*

PULSE

*

*
16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device

D: Device for storing check result

n: Bits specified for check

Explanations:
1.

If S is used in device F, only 16-bit instruction is applicable.

2.

Range of n: 0 ~ 15 (16-bit instruction); 0 ~ 31 (32-bit instruction)

3.

See the specifications of each model for their range of use.

4.

When the nth bit of S is “1”, D = On; when the nth bit of S is “0”, D = Off.

Program Example:
1.

When X0 = On, assume the 15th bit of D0 is “1”, and M0 = On. Assume the 15th bit of D0 is “0”, and M0 = Off.

2.

When X0 goes Off, M0 will remains in its previous status.
X0
BON

6-66

D0

K15

M0

b15
0 0

0

1

0

0

1

0 0
D0

0

0

0

0

1

0

b0
0 M0=Off

b15
1 0

0

1

0

0

1

0 0
D0

0

0

0

0

1

0

b0
0 M0=On

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

45

D
Type

MEAN

Y

Function
Mean

P

Bit Devices
X

OP

Operands

M

S
D
n

S

Word Devices
K H KnX KnY KnM KnS
*
*
*
*
*
*
*
* *
*
*
*
*

Program Steps

T C D E F MEAN, MEANP: 7 steps
* * *
DMEAN, DMEANP: 13 steps
* * * * *
* * * * *

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device to obtain mean value

D: Destination device for storing mean value

n: The number of consecutive

source devices used
Explanations:
1.

If D is used in device F, only 16-bit instruction is applicable.

2.

Range of n: 1 ~ 64

3.

In ES/EX/SS series models: Operand S cannot designate KnX, KnY, KnM, KnS.

4.

ES/EX/SS series MPU does not support E, F index register modification.

5.

See the specifications of each model for their range of use.

6.

After the content of n devices starting from S are added up, the mean value of the result will be stored in D.

7.

Remainders in the operation will be left out.

8.

Provided the No. of designated device exceeds its normal range, only the No. within the normal range can be
processed.

9.

If n falls without the range of 1 ~ 64, PLC will determine it as an “instruction operation error”.

Program Example:
When X10 = On, the contents in 3 (n = 3) registers starting from D0 will be summed and then divided by 3. The
obtained mean value will be stored in D10 and the remainder will be left out.
X10
MEAN
(D0+D1+D2)/3
D0

K100

D1

K113

D2

K125

D10

D0

DVP-PLC Application Manual

K3

D10

D10

K112

Remainder = 3, left out

6-67

6 Application Instructions API 00-49
API

Mnemonic

46

ANS
Type

Operands

Function
Timed Annunciator Set

Bit Devices
X

OP

Y

M

S
m
D

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

D

E

F ANS: 7 steps

*
*
*
PULSE
ES EX SS SA SX SC EH SV

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Timer for monitoring annunciator

m: Time setting

D: Annunciator device

Explanations:
1.

Range of S: for SA/SX/SC T0 ~ T191; for EH/EH2/SV/EH3/SV2 T0 ~ T199.

2.

m can designate K1 ~ K32,767 (unit: 100ms)

3.

Range of D: for SA/SX/SC S896 ~ S1023; for EH/EH2/SV/EH3/SV2 S900 ~ S1023.

4.

See the specifications of each model for their range of use.

5.

Flags: M1048 (annunciator in action); M1049 (valid monitoring)

6.

This instruction is used for enabling the annunciator.

Program Example:
If X3 = On for more than 5 seconds, annuniciator point S999 = On. Even X3 goes Off afterwards, S999 will still keep
On. However, T10 will be reset to Off and the present value = 0.
X3
ANS

API

Mnemonic

47

ANR
OP

T10

K50

S999

Operands

Function
Annunciator Reset

P
Descriptions

N/A

Program Steps
ANR, ANRP: 1 steps

PULSE
ES EX SS SA SX SC EH SV

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Explanations:
1.

No operand.

2.

This instruction is used for resetting the annunciator.

3.

When more than one annuciators are On, the annunciator of smaller number will be reset.

4.

This instruction adopts pulse execution instructions (ANRP)

Program Example:

6-68

DVP-PLC Application Manual

6 Application Instructions API 00-49
1.

If X10 and X11 = On at the same time for more than 2 seconds, annuniciator point S910 = On. Even X10 and
X11 go Off afterwards, S910 will still keep On. However, T10 will be reset to Off and the present value = 0.

2.

When X10 and X11 are On at the same time for less than 2 seconds, the present value of T10 will be reset to 0.

3.

When X3 goes from Off to On,
S896 ~ S1023 in SA/SX/SX are able to reset the annunciators in action.
S900 ~ S1023 in EH/EH2/ SV/EH3/SV2 are able to reset the annunciators in action.

4.

When X3 goes from Off to On again, the annuniator with secondary smaller No. will be reset.
X10

X11
ANS

T10

K20

S910

X3
ANRP

Remarks:
1.

Flag:
a) M1048 (annunciator in action): When M1049 = On, any of the annunciators among S896 ~ S1023 in
SA/SX/SC or S900 ~ S1023 in EH/EH2/SV/EH3/SV2 starts output, M1048 will be On.
b) M1049 (valid monitoring): When M1049 = On, D1049 will automatically display the annuciator of the
smallest number in action.

2.

Application of annunciators:
I/O point configuration:
X0: Forward switch

Y0: Forward

S910: Forward annunciator

X1: Backward switch

Y1: Backward

S920: Backward annunciator

X2: Front position switch

Y2: Annunciator indicator

X3: Back position switch
X4: Annunciatro reset button
M1000
M1049
Y0
Y1
X0

X2
ANS

T0

K100

S910

ANS

T1

K200

S920

X3
X2
Y0

Y0
X1

X3
Y1

Y1
M1048
Y2
X4
ANRP

1.

M1048 and D1049 are valid only when M1049 = On.

DVP-PLC Application Manual

6-69

6 Application Instructions API 00-49
2.

When Y0 = On for more than 10 seconds and the device fails to reach the frong position X2, S910= On.

3.

When Y1 = On for more than 10 seconds and the device fails to reach the back position X3, S920= On.

4.

When backward switch X1 = On and backward device Y1 = On, Y1 will go Off only when the device reaches the
back position switch X3.

5.

Y2 will be On when any annunciator is enabled. Whenever X4 is on, 1 annunciator in action will be reset. The
reset starts from the annunciator with the smallest No.

6-70

DVP-PLC Application Manual

6 Application Instructions API 00-49
API

Mnemonic

48

D
Type

SQR

Y

M

S
D

Function
Square Root

P

Bit Devices
X

OP

Operands

S

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F SQR, SQRP: 5 steps
* *
*
DSQR, DSQRP: 9 steps
*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device

D: Device for storing the result

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1067 (instruction operation error)

3.

This instruction performs a square root operation on S and stores the result in D.

4.

S can only be a positive value. If S is negative, PLC will regard it as an “instruction operation error” and will not
execute this instruction. M1067 and M1068 = On and D1067 records the error code 0E1B (hex).

5.

The operation result D should be integer only, and the decimal will be left out. Borrow flag M1021 = On.

6.

When the operation result D = 0, zero flag M1020 = On.

Program Example:
When X10 = On, the instruction performs a square root on D0 and stores the result in D12.
X10
SQR

D0

D0

D12

D12

DVP-PLC Application Manual

6-71

6 Application Instructions API 00-49
API

Mnemonic

49

D
Type

FLT

Y

M

Function
Convert BIN integer to binary floating point

P

Bit Devices
X

OP

Operands

S

S
D

Word Devices
K H KnX KnY KnM KnS T C D E
*
*

Program Steps
F FLT, FLTP: 5 steps
DFLT, DFLTP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device for conversion

D: Device for storing the conversion result

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1081 (FLT instruction function switch); M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

D will occupy 2 consecutive devices

4.

When M1081 is Off, BIN integer is converted into binary floating point value. At this time, S of the 16-bit
instruction, FLT, occupies 1 register and D occupies 2 registers.

a) If the absolute value of the conversion result > max. floating value, carry flag M1022 = On.
b) If the absolute value of the conversion result < min. floating value, carry flag M1021 = On.
c) If the conversion result is 0, zero flag M1020 = On.
5.

When M1081 is On, binary floating point value is converted into BIN integer (digits after decimal point are left
out). At this time, S of the 16-bit instruction, FLT, occupies 2 registers and D occupies 1 register (action same as
that of INT instruction).

a) If the conversion result exceeds the range of BIN integer available in D (for 16-bit: -32,768 ~ 32,767; for 32-bit:
-2,147,483,648 ~ 2,147,483,647), D will obtain the maximum or minimum value and carry flag M1022 = On.
b) If any digits is left out during the conversion, borrow flag M1021 = On.
c) If S = 0, zero flag M1020 = On.
d) After the conversion, D stores the result in 16 bits.
Program Example 1:
1.

When M1081 = Off, the BIN integer is converted into binary floating point value.

2.

When X10 = On, D0 (BIN integer) is converted into D13 and D12 (binary floating point value).

3.

When X11 = On, D1 and D0 (BIN integer) are converted into D21 and D20 (binary floating point value).

4.

If D0 = K10, X10 will be On. The 32-bit value of the converted floating point will be H41200000 and stored in
32-bit register D12 (D13).

5.

If 32-bit register D0 (D1) = K100,000, X11 will be On. The 32-bit value of the converted floating point will be
H47C35000 and stored in 32-bit register D20 (D21).

6-72

DVP-PLC Application Manual

6 Application Instructions API 00-49
M1002
RST

M1081

FLT

D0

D12

DFLT

D0

D20

X10
X11

Program Example 2:
1.

When M1081 = On, the binary floating point value is converted into BIN integer (the decimal is left out).

2.

When X10 = On, D0 and D1 (binary floating point value) are converted into D12 (BIN integer). If D0 (D1) =
H47C35000, the floating point value will be presented as 100,000. Due to that the value is larger than the value
presentable by the 16-bit register D12, the result will be D12 = K32, 767 and M1022 = On.

3.

When X11 = On, D1 and D0 (binary floating point value) are converted into D21 and D20 (BIN integer). If D0 (D1)
= H47C35000, the floating point value will be presented as 100,000. The result will be stored in the 32-bit
register D20 (D21).
M1002
SET

M1081

FLT

D0

D12

DFLT

D0

D20

X10
X11

Program Example 3:
Please use this instruction to complete the following operation.

K61.5

(D10)

(X7~X0)
16-bit BIN 2-digit BCD

1

2

6

5

4

(D101,D100) (D200) BIN (D301,D300)
binary floating point
binary floating point
3

(D21,D20)
binary floating point

7
8

(D31,D30)
decimal floating point (for monitoring )
(D41,D40)
32 -bit integer

(D203,D202)
binary floating point
(D401,D400)
binary floating point

DVP-PLC Application Manual

6-73

6 Application Instructions API 00-49
M1000
1
2
3
4
5
6
7
8

FLT

D10

D100

BIN

K2X0

D200

FLT

D200

D202

DEDIV

K615

K10

D300

DEDIV

D100

D202

D400

DEMUL

D400

D300

D20

DEBCD

D20

D30

DINT

D20

D40

1
○
D10 (BIN integer) is converted to D101 and D102 (binary floating point value).
2
○
X7 ~ X0 (BCD value) are converted to D200 (BIN value).
3
○
D200 (BIN integer) is converted to D203 and D202 (binary floating point value).

4The result of K615 ÷ K10 is stored in D301 and D300 (binary floating point value).
5 The result of binary decimal division (D101, D100) ÷ (D203, D202) is stored in D401 and D400 (binary floating
○

point value).
6 The result of binary decimal multiplication (D401, D400) × (D301, D300) is stored in D21 and D20 (binary
○

floating point value).
7
D21 and D20 (binary floating point value) are converted to D31 and D30 (decimal floating point value).
○
8
○
D21 and D20 (binary floating point value) are converted to D41 and D40 (BIN integer).

6-74

DVP-PLC Application Manual

7 Application Instructions API 50-99
API

Mnemonic

50

REF
Type

OP
D
n

Operands
Refresh

P

Bit Devices
X
*

Y
*

M

Function

S

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F REF, REFP: 5 steps
*

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Start device to be I/O refreshed

n: Number of items to be I/O refreshed

Explanations:
1.

D must designate X0, X10, Y0, Y10…the points whose 1s digit is “0”. See remarks for more details.

2.

Range of n: 8 ~ 256 (has to be the multiple of 8).

3.

See the specifications of each model for their range of use.

4.

The status of all PLC input/output terminals will be updated after the program scans to END. When the
program starts to scan, the status of the external input terminal is read and stored into the memory of the input
point. The output terminal will send the content in the output memory to the output device after END instruction
is executed. Therefore, this instruction is applicable when the latest input/output data are needed for the
operation.
D has to be designated to be X0, X10, Y0, Y10…such forms whose 1st digit is “0”. Range of n: 8 ~ 256 (must

5.

be 8’s multiple); otherwise it will be regarded as an error. The range varies in different models. See Remarks
for more details.
Program Example 1:
When X0 = On, PLC will read the status of input points X0 ~ X17 immediately and refresh the input signals without
any input delay.
X0
REF

X0

K16

Program Example 2:
When X0 = On, the 8 output signal from Y0 ~ Y7 will be sent to output terminals and refreshed without having to wait
for the END instruction for output.
X0
REF

Y0

K8

Remarks:
The instruction only process the I/O points X0 ~ X17 and Y0 ~ Y17 of ES/EX/SS/SA/SX/SC series MPU, namely n =
K8 or n = K16.

D V P - P L C A P P L I C AT I O N M A N U A L

7-1

7 Application Instructions API 50-99
API

Mnemonic

51

REFF
Type

Y

M

Function
Refresh and Filter Adjust

P

Bit Devices
X

OP

Operands

S

n

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F REFF, REFFP: 3 steps
* *
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
n: Response time (unit: ms)
Explanation:
1.

Range of n: for SA/SX/SC, n = K0 ~ K20; for EH/EH2/SV/EH3/SV2, n = K0 ~ K60.

2.

To avoid interferences, X0 ~ X17 of EH/EH2/SV/EH3/SV2 series MPU and X0 ~ X7 of SA/SX/SC series MPU
are equipped with digital filters on output terminals. Digital filters adjust the response time by REFF instruction.
This instruction sets up n directly in D1020 (adjusting the response time of X0 ~ X7) and D1021 (adjusting the
response time of X10 ~ X17).

3.

Rules for adjusting the reponse time of the filter at X0 ~ X17:
a) When the power of PLC turns from Off to On or the END instruction is being executed, the response time
will be determined upon the contents in D1020 and D1021.
b) You can use MOV instruction in the program to move the time values to D1020 and D1021 and make
adjustments in the next scan.
c) You can use REFF instruction to change the response time during the execution of the program. The
changed response time will be move to D1020 and D1021 and you can make adjustments in the next scan.

Program Example:
1.

When the power of PLC turns from Off to On, the response
time of X0 ~ X17 will be determined by the contents in D1020
and D1021.

2.

When X20 = On, REFF K5 will be executed and the response
time will be changed to 5ms for the adjustment in the next
scan.

3.

When X20 = Off, the REFF K20 will be executed and the

X20
REFF

K5

X0
Y1
X20
REFF

K20

X1
Y2

response time will be changed to 20ms for the adjustment in
the next scan.

END

Remarks:
When inserting an interruption subroutine in the program or using the high speed counter or API 56 SPD instruction,
the corresponding signals at the input terminals will not delay and has nothing to do with this instruction.

7-2

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

52

MTR
Type

OP
S
D1
D2
n

Operands
Input Matrix

Bit Devices
X
*

Function

Word Devices

Y

M

S

*
*

*

*

Program Steps

K H KnX KnY KnM KnS T C D E F MTR: 9 steps

*

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device of matrix input

D1: Start device of matrix output

D2: Corresponding start device for matrix scan

n: Number of arrays in matrix scan
Explanations:
1.

S must designate X0, X10…the X points whose 1st digit is “0” and occupies 8 consecutive points.

2.

D1 must designate Y0, Y10…the Y points whose 1st digit is “0” and occupies n consecutive points.

3.

D2 must designate Y0, M0. S0…the Y, M, S points whose 1st digit is “0”.

4.

Range of n: 2 ~ 8.

5.

See the specifications of each model for their range of use.

6.

Flag: M1029 (execution of the instruction is completed).

7.

S is the start device No. of all input terminals connected to the matrix. Once S is designated, the 8 points
following the No. will be the input terminals in the matrix.

8.

D1 designate the start device No. of transistor output Y in the matrix scan.

9.

This instruction occupies continuous 8 input devices starting from S. n external output terminals starting from
D1 read the 8 switches of n arrays by matrix scan, obtaining 8 × n multiple-matrix input points. The status of
scanned switches will be stored in the devices starting from D2.

10.

Maximum 8 input switches can be parallelly connected in 8 arrays and obtaining 64 input points (8 × 8 = 64).

11.

When the 8-point 8-array matrix inputs are in use, the reading time of each array is approximately 25ms,
totaling the reading of 8 arrays 200ms, i.e. the input signals with On/Off speed of over 200ms are not
applicable in a matrix input.

12.

The drive contact of this instruction uses normally On contact M1000.

13.

Whenever this instruction finishes a matrix scan, M1029 will be On for one scan period.

14.

There is no limitation on the number of times using the instruction, but only one instruction can be executed in
a period of time.

Program Example:
1.

When PLC RUN, MRT instruction will start to be executed. The statuses of the external 2 arrays of 16 switches
will be read in order and stored in the internal relays M10 ~ M17, M20 ~ M27.

D V P - P L C A P P L I C AT I O N M A N U A L

7-3

7 Application Instructions API 50-99
M1000
MTR

2.

X40

Y40

M10

K2

The figure below illustrates the external wiring of the 2-array matrix input loop constructed by X40 ~ X47 and
Y40 ~ Y41. The 16 switches correponds to the internal relays M10 ~ M17, M20 ~ M27. Should be used with
MTR instruction.
Must c onnec t to the diode
of 0.1A/50V, 1N4148, in series
M2 0

M10: the internal relay
corresponding to
the external switch

X 41

M1 0

24G +24V S/S

C

3.

M2 1

M2 2

X 42

M11

M2 3

X 43

M1 2

M2 4

X 44

M1 3

M2 5

X 45

M1 4

M2 6

X 46

M1 5

M2 7

X 47

M1 6

M1 7

X40

X41

X42

X43

X44

X45

X46

X47

Y40

Y41

Y42

Y43

Y44

Y45

Y46

Y47

See the figure above. The 8 points starting from X40 start to perform a matrix scan from Y40 ~ Y41 (n = 2). D2
designates that the start device No. of the read results is M10, indicating that the first array is read to M10 ~
M17 and the second array is read to M20 ~ M27.
Read input signals in the 1st array

Y40

1

3

Read input signals in the 2nd array

Y41

2

4
25ms

Processing time of each array: approx. 25ms

7-4

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

53

D

Function
High Speed Counter Set

HSCS

Type

Bit Devices
X

OP

Operands

S1
S2
D

Word Devices

Y

M

S

*

*

*

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*

Program Steps
C
*
*

D
*

E
*

F DHSCS: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Comparative value

S2: No. of high speed counter

D: Comparison result

Explanations:
1.

S2 has to designate the No. of high speed counters C235 ~ C255. See remarks for more details.

2.

D can designate I0□0; □ = 1 ~ 6. ES series MPU does not support this.

3.

D of ES and SA series MPU does not support E, F index register modification.

4.

See the specifications of each model for their range of use.

5.

Flags: M1289 ~ M1294 are interruption disability of the high speed counters in EH/EH2/SV/EH3/SV2 series
MPU. See Program Example 3 for more details.

6.

The high speed counter inputs counting pulses from the corresponding external input terminals X0 ~ X17 by
inserting an interruption. When the high speed counter designated in S2 pluses 1 or minuses 1, DHSCS
instruction will perform a comparison immediately. When the present value in the high speed counter equals
the comparative value designated in S1, device designated in D will turn On. Even the afterward comparison
results are unequal, the device will still be On.

7.

If the devices specified as the device D are Y0 ~ Y17, when the compare value and the present value of the
high-speed counter are equal, the comparison result will immediately output to the external inputs Y0 ~ Y17,
and other Y devices will be affected by the scan cycle. However, M, S devices are immediate output and will
not be affected by the scan cycle.

Program Example 1:
After PLC RUN and M0 = On, DHSCS instruction will be executed. When the present value in C235 changes from
99 to 100 or 101 to 100, Y10 will be On constantly.
M1000
DCNT

C235

K1000

DHSCS

K100

C235

M0
Y10

On immediately

Program Example 2:
Differences between Y output of DHSCS instruction and general Y output:
a) When the present value in C249 changes from 99 to 100 or 101 to 100, Y10 outputs immediately to the external
output point by interruption and has nothing to do with the PLC scan time. However, the time will still be delayed
by the relay (10ms) or transistor (10us) of the output module.
D V P - P L C A P P L I C AT I O N M A N U A L

7-5

7 Application Instructions API 50-99
b) When the present value in C249 changes from 99 to 100, the drive contact of C249 will be On immediately. When
the execution arrives at SET Y17, Y17 will still be affected by the scan time and will output after END instruction.
M1000
DCNT

C249

K100

DHSCS

K100

C249

SET

Y17

On immediately

Y10

C249

Program Example 3:
1. High speed counter interruption:
a) Operand D of DHSCS instruction can designate I0□0, □ = 1 ~ 6, as the timing of interruption when the
counting reaches its target.
b) ES/EX/SS series MPU does not support high speed counter interruption.
c) SA/SX/SC series MPU supports high speed counter interruption. However, when DHSCS instruction
designates an I interruption, the designated high speed counter cannot be used in DHSCS, DHSCR, DHSZ
instructions. Misuse of high speed counter will result in error.
d) For SA/SX/SC series MPU, when the counting reaches the target, the interruption will occur. X0 is the
counter for counting input and the interruption No. is I010 (1 phase 2 inputs and A-B phase counter No. C246
~ C254 can only designate I010). X1 designates I020; X2 designates I030; X3 designates I040; X4
designates I050; X5 designates I060, totaling 6 points.
e) When the present value in C251 changes from 99 to 100 or 101 to 100, the program will jump to I010 and
execute the interruption service subroutine.
EI
M1000
DCNT

C251

K1000

DHSCS

K100

C251

I010

FEND
M1000
I010

Y1
IRET
END

2. In SA/SX/SC series MPU, M1059 is “I010 ~ I060 high speed counter interruption forbidden” flag.
3. In EH/EH2/SV/EH3/SV2 series MPU, M1289 ~ M1294 are the respectively for I010 ~ I060 “high speed counter
interruption forbidden flags”, i.e. when M1294 = On, I060 interruption will be forbidden.
Interruption pointer I No. Interruption forbidden flag

7-6

Interruption pointer I No.

Interruption forbidden flag

I010

M1289

I040

M1292

I020

M1290

I050

M1293

I030

M1291

I060

M1294
D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Remarks:
1.

The output contact of the high speed counter and the comparative outputs of API 53 DHSCS, API 34 DHSCR
and API 55 DHSZ instructions only perform comparison and contact outputs when there is a counting input.
When using data operation instructions, e.g. DADD, DMOV, for changing the present value in the high speed
counter or making the present value equals the set value, there will not be comparisons or comparative
outputs because there is no counting inputs.

2.

High speed counters supported by ES/EX/SS series MPU (total bandwidth: 20kHz):
1-phase 1 input

Type
Input

X0

C235

C236

C237

C238

C241

U/D

X1

U/D

X2

1-phase 2 inputs
C244

C246

C247

C249

C251

C252

C254

U/D

U/D

U

U

U

A

A

A

R

R

D

D

D

B

B

B

R

R

R

R

U/D

C242

U/D

X3

2-phase 2 inputs

U/D

R

S

S

S

U: Progressively increasing input

A: A phase input

S: Input started

D: Progressively decreasing input

B: B phase input

R: Input cleared

a)

Input points X0 and X1 can be planned as counters of higher speed (1 phase input can reach 20kHz).
However, the total counting frequency of the two input points has to be smaller or equal 20kHz. Provided
the input is a 2-phas input signal, the counting frequency will be approximately 4kHz. The frequency of
the input points X2 and X3 (1-phase) can reach 10kHz.

b)

For ES/EX/SS series MPU, the uses of DHSCS instructio with DHSCR instruction cannot be more than 4
times.

3.

High speed counters supported by SA/SX series MPU (total bandwidth: 40kHz):
1-phase 1 input

Type
Input

X0
X1
X2
X3

1-phase 2 inputs

2-phase 2 inputs

C235 C236 C237 C238 C239 C240 C241 C242 C244 C246 C247 C249 C251 C252 C253 C254
U/D

U/D

U/D

U

U

U

A

A

B

A

R

R

D

D

D

B

B

A

B

R

R

U/D
U/D

U/D
U/D

X4

R

S

S

R
S

U/D

X5

U/D

U: Progressively increasing input

A: A phase input

S: Input started

D: Progressively decreasing input

B: B phase input

R: Input cleared

a)

R

Input points X0 and X1 for 1-phase input can reach a frequency of 20kHz and X2 ~ X5 can reach 10kHz.
2-phase input (X0, X1) C251, C252 and C254 can reach a frequency of 4kHz and C253 reach 25kHz
(only supports 4 times frequency counting).

b)

Functions of the input point X5:
i)

When M1260 = Off, C240 is the general U/D high speed counuter.

ii) When M1260 = On and C240 is enabled by DCNT instruction, X5 will be the shared reset signal for
C235 ~ C239. The counter C240 will still receive the counting input signals from X5.
D V P - P L C A P P L I C AT I O N M A N U A L

7-7

7 Application Instructions API 50-99
4.

High speed counters supported by SC series MPU (total bandwidth: 130kHz):
Type

1-phase 1 input

1-phase 2 inputs

2-phase inputs

C235 C236 C237 C238 C239 C240 C241 C242 C243 C244 C245 C246 C247 C249 C250 C251 C252 C254 C255

Input

X0
X1
X2
X3
X4
X5
X10
X11

U/D

U/D
R

U/D
U/D

U/D
R
U/D
R

U/D

U
D

S

U
D
R

U
D
R
S

A
B

A
B
R

A
B
R
S

U/D
U/D
U/D
U/D

U
D

U: Progressively increasing input

A: A phase input

S: Input started

D: Progressively decreasing input

B: B phase input

R: Input cleared

A
B

a) The functions of the high speed counters of input points X0 ~ X5 are the same of those in SA/SX series
MPU.
b) The input points of 1-phase input X10 (C243), X11 (C245) and (X10, X11) C250 can reach a frequency of
100kHz. The total bandwidth of X10 ~ X11 is 130kHz. C255 of the 2-phase input (X10, X11) can reach a
frequency of 50kHz.
c) For SA/SX/SC series MPU, the uses of DHSCS instruction with DHSCR instruction cannot be more than 6
times and the uses of DHSZ instruction cannot be more than 6 times as well. When DHSCR instruction
designates I interruption, the designated high speed counter cannot be used in other DHSCS, DHSCR
and DHSZ instructions.
d) The functions of X10 ~ X11 high speed counters in SC series MPU:
i) When X10 and X11 are set as 1-phase 1 input or 1-phase 2 inputs. The maximum frequency of a
single phase can reach 100kHz. When they are set as 2-phase 2 inputs, the maximum frequency can
reach 50kHz.
ii) X10 and X11 can select rising-edge counting mode or falling-edge counting mode. X10 is set by
D1166 and X11 is set by D1167. K0: rising-edge counting. K1: falling-edge counting. K2: rising/falling
edge counting (only supports X10).
iii) The counting up and down of C243 are determined by the On/Off of M1243. The counting up and
down of C245 are determined by the On/Off of M1245. Rising-edge and falling-edge counting are not
able to take place at the same time. The rising-edge trigger and falling-edge trigger of C250 are
determined by the content (K0 or K1) of D1166. C255 can only be used in a 4 times frequency
counting and you can only select rising-edge trigger.
iv) When C243 or C245 is in use, you will not be able to use C250 or C255, and vice versa.
v) High speed counter and high speed comparator:

7-8

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Output reaches
comparative value
X10

C243

X11

C245

Co

C250

m

p

a
ar

to

r

Set value 10
Set value 11

High-speed
comparison instruction

C255

vi) Explanations on high speed counter and high speed comparator:
(1) When DHSCS and DHSCR instructions use the high speed counter (C243/C245/C250/C255),
they can only use the set values of 2 groups of high speed comparative instructions. Assume that
a group of comparative instruction DHSCS D0 C243 Y10 is already in use, you can only set
another group DHSCR D2 C243 Y10 or DHSCS D4 C245 Y10.
(2) When DHSZ instruction use the high speed counter (C243/C245/C250/C255), it can only use the
set value of a group of comparators.
(3) The number of set values in a high-speed comparative instruction offered in SA/SX series MPU
will not decrease becasus of the addition of the new high speed counters.
(4) If the high-speed comparative instruction DHSCS requires a high-speed reponse output, it is
suggested that you use Y10 or Y11 for the output. If you use other general devices for the output,
there will be delay of 1 scan period. For example, when in I0x0 interruption, C234 will correspond
to I020, C245 to I040 and C250/C255 to I060.
(5) The high-speed comparative instruction DHSCR can clear output devices and counter devices,
but only the counters used by the same instruction, e.g. DHSCR K10 C243 C243. This function
can only applied in the four special high speed counters C243, C245, C250 and C255.
e) Counting modes:
i) The 2-phase 2 inputs counting mode of the high speed counters in ES/EX/SS (V5.5 and above) and
SA/SX/SC series MPU is set by special D1022 with normal frequency, double frequency and 4 times
frequency modes. The contents in D1022 will be loaded in in the first scan when PLC is switched from
STOP to RUN.
Device No.

Function

D1022

Setting up the multiplied frequency of the counter

D1022 = K1

Normal frequency mode selected

D1022 = K2 or 0

Double frequency mode selected (default)

D1022 = K4

4 times frequency mode selected

D V P - P L C A P P L I C AT I O N M A N U A L

7-9

7 Application Instructions API 50-99
ii) Multiplied frequency mode (qr indicates the occurrence of counting)

1
(Normal
frequency)

Counting mode

Counting wave pattern
A-phase
B-phase

Counting down

A-phase

2
(Double
frequency)

2-phase 2 inputs

Counting up

B-phase

Counting up

Counting down

4
(4 times
frequency)

A-phase
B-phase

Counting up

5.

Counting down

EH/EH2/SV/EH3/SV2 series MPU supports high speed counters. C235 ~ C240 are program-interruption
1-phase high speed counter with a total bandwidth of 20kHz, can be used alone with a counting frequency of
up to 10kHz. C241 ~ C254 are hardware high speed counter (HHSC). There are four HHSC in
EH/EH2/SV/EH3/SV2 series MPU, HHSC0 ~ 3. The pulse input frequency of HHSC0 and HHSC1 can reach
200kHz and that of HHSC2 and HHSC3 can reach 20kHz (1 phase or A-B phase). The pulse input frequency of
HHSC0 ~ 3 of 40EH2 series MPU can reach 200kHz, among which:
C241, C246 and C251 share HHSC0
C242, C247 and C252 share HHSC1
C243, C248 and C253 share HHSC2
C244, C249 and C254 share HHSC3
a)

Every HHSC can only be designated to one counter by DCNT instruction.

b)

There are three counting modes in every HHSC (see the table below):
i)

1-phase 1 input refers to “pulse/direction” mode.

ii) 1-phase 2 inputs refers to “clockwise/counterclockwise (CW/CCW)” mode.
iii) 2-phase 2 inputs refers to “A-B phase” mode.

7-10

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Program-interruption
high speed counter

Counter
type
Type
Input

X0
X1

Hardware high speed counter

1-phase 1 input

1-phase 1 input

1-phase 2 inputs

C235 C236 C237 C238 C239 C240 C241 C242 C243 C244 C246 C247 C248 C249 C251 C252 C253 C254

U/D

U/D

U

A

D

B

R

R

R

S

S

S

U/D

X2

U/D

X3

U/D

X4

U/D

X5

U/D
U/D

U

A

D

B

X6

R

R

R

X7

S

S

S

X10

U/D

X11

U

A

D

B

X12

R

R

R

X13

S

S

S

X14

U/D

X15

U

A

D

B

X16

R

R

R

X17

S

S

S

U: Progressively increasing input
B: Progressively decreasing input

c)

2-phase 2 inputs

A: A phase input
B: B phase input

S: Input started
R: Input cleared

In EH/EH2/SV/EH3/SV2 series MPU, there is no limitation on the times of using the hardware high speed
counter related instructions, DHSCS, DHSCR and DHSZ. However, when these instructions are enabled
at the same time, there will be some limitations. DHSCS instruction will occupy 1 group of settings,
DHSCR 1 group of settings and DHSZ 2 groups of settings. There three instructions cannot occupy 8
groups of settings in total; otherwise the system will ignore the instructions which are not the first scanned
and enabled.

d)

System structure of the hardware high speed counters:
i) HHSC0 ~ 3 have reset signals and start signals from external inputs. Settings in M1272, M1274,
M1276 and M1278 are reset signals of HHSC0, HHSC1, HHSC2 and HHSC3. Settings in M1273,
M1275, M1277 and M1279 are start signals of HHSC0, HHSC1, HHSC2 and HHSC3.
ii) If the external control signal inputs of R and S are not in use, you can set M1264/M1266/M1268/M1270
and M1265/M1267/M1269/M1271 as True and disable the input signals. The corresponding external
inputs can be used again as general input points (see the figure below).
iii) When special M is used as a high speed counter, the inputs controlled by START and RESET will be
affected by the scan time.

D V P - P L C A P P L I C AT I O N M A N U A L

7 - 11

7 Application Instructions API 50-99
HHSC0 HHSC1 HHSC2 HHSC3
X0

X4

X10

X14

C ounting pulses

U/D

Present value in counter

U

HHSC0

A

HHSC1

HHSC0 HHSC1 HHSC2 HHSC3
X5

X1

X11

X15

C ounting pulses

Counting reaches set value

Comparator

HHSC2

D

HHSC3

B

HHSC0 HHSC1 HHSC2 HHSC3
D1225

D1226

Counting up/dow n
monitoring flag

D1228 Select counting m odes

D1227

8 set values

DHSCS occupies 1 group of set values
DHSCR occupies 1 group of set values
Output reaches
comparative value DHSCZ occupies 2 groups of set values
for outputs

Set values 1 ~ 4 indicate
Mode 1 ~ 4 (1 ~ 4 times frequency)
HHSC0 HHSC1 HHSC2 HHSC3 U/D mode setup flag
C241

C242

C243

C244

M1241

M1242

M1243

M1244

HHSC0 HHSC1 HHSC2 HHSC3
X2

X6

X12

X16

M1264

M1266

M1268

M1270

M1272

M1274

M1276

M1278

AND

OR

H HSC0 M1246

M1251

H HSC1 M1247

M1252

H HSC2 M1248

M1253

H HSC3 M1249

M1254

Reset signal R

e)

X3

X7

X13

X17

M1267

M1269

M1271

M1273

M1275

M1277

M1279

DHSCS
DHSCR
DHSCZ

SET/RES ET
I 010 ~ I 060 clear
the present value

Interruption forbidden flag
I 010 M1289
I 020 M1290
I 030 M1291
I 040 M1292
I 050 M1293
I 060 M1294

HHSC0 HHSC1 HHSC2 HHSC3
M1265

High-speed Output reaches
comparative
instruction comparative value

AND

OR

Start signal S

Counting modes:
Special D1225 ~ D1228 are for setting up different counting modes of the hardware high speed counters
(HHSC0 ~ 3) in EH/EH2/SV/EH3/SV2 series MPU. There are normal ~ 4 times frequency for the counting
and the default setting is double frequency.
Counting modes
Type

1-phase
1 input

1-phase
2 inputs

2-phase
2 inputs

7-12

Wave pattern

Set value in
special D
1
(Normal
frequency)
2
(Double
frequency)

Counting up(+1)

Counting down(-1)

U/D
U/D FLAG
U/D
U/D FLAG

1
(Normal
frequency)

U

2
(Double
frequency)

U

1
(Normal
frequency)

A

2
(Double
frequency)

A

3
(Triple
frequency)

A

4
(4 times
frequency)

A

D

D

B

B

B

B

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
f)

Special registers for relevant flags and settings of high speed counters:
Flag

Function

M1150

DHSZ instruction in multiple set values comparison mode

M1151

The execution of DHSZ multiple set values comparison mode is completed.

M1152

Set DHSZ instruction as frequency control mode

M1153

DHSZ frequency control mode has been executed.
Designating the counting direction of high speed counters C235 ~ C245

M1235 ~ M1245

When M12□□ = Off, C2□□ will perform a counting up.
When M12□□ = On, C2□□ will perform a counting down.
Monitor the counting direction of high speed counters C246 ~ C255

M1246 ~ M1255

When M12□□ = Off, C2□□ will perform a counting up.
When M12□□ = On, C2□□ will perform a counting down.

M1260

X5 as the reset input signal of all high speed counters

M1261

High-speed comparison flag for DHSCR instruction

M1264

Disable the external control signal input point of HHSC0 reset signal point (R)

M1265

Disable the external control signal input point of HHSC0 start signal point (S)

M1266

Disable the external control signal input point of HHSC1 reset signal point (R)

M1267

Disable the external control signal input point of HHSC1 start signal point (S)

M1268

Disable the external control signal input point of HHSC2 reset signal point (R)

M1269

Disable the external control signal input point of HHSC2 start signal point (S)

M1270

Disable the external control signal input point of HHSC3 reset signal point (R)

M1271

Disable the external control signal input point of HHSC3 start signal point (S)

M1272

Internal control signal input point of HHSC0 reset signal point (R)

M1273

Internal control signal input point of HHSC0 start signal point (S)

M1274

Internal control signal input point of HHSC1 reset signal point (R)

M1275

Internal control signal input point of HHSC1 start signal point (S)

M1276

Internal control signal input point of HHSC2 reset signal point (R)

M1277

Internal control signal input point of HHSC2 start signal point (S)

M1278

Internal control signal input point of HHSC3 reset signal point (R)

M1279

Internal control signal input point of HHSC3 start signal point (S)

M1289

High speed counter I010 interruption forbidden

M1290

High speed counter I020 interruption forbidden

M1291

High speed counter I030 interruption forbidden

M1292

High speed counter I040 interruption forbidden

M1293

High speed counter I050 interruption forbidden

M1294

High speed counter I060 interruption forbidden

M1312

C235 Start input point control

M1313

C236 Start input point control

D V P - P L C A P P L I C AT I O N M A N U A L

7-13

7 Application Instructions API 50-99
Flag

Function

M1314

C237 Start input point control

M1315

C238 Start input point control

M1316

C239 Start input point control

M1317

C240 Start input point control

M1320

C235 Reset input point control

M1321

C236 Reset input point control

M1322

C237 Reset input point control

M1323

C238 Reset input point control

M1324

C239 Reset input point control

M1325

C240 Reset input point control

M1328

Enable Start/Reset of C235

M1329

Enable Start/Reset of C236

M1330

Enable Start/Reset of C237

M1331

Enable Start/Reset of C238

M1332

Enable Start/Reset of C239

M1333

Enable Start/Reset of C240

Special D

Function

D1022

Multiplied frequency of A-B phase counters for ES/SA series MPU

D1150

Table counting register for DHSZ multiple set values comparison mode

D1151

Register for DHSZ instruction frequency control mode (counting by table)

D1152 (low word) In frequency control mode, DHSZ reads the upper and lower limits in the table
D1153 (high word) counting register D1153 and D1152.
D1166

D1167

Switching between rising/falling edge counting modes of X10 (for SC series
MPU only)
Switching between rising/falling edge counting modes of X11 (for SC series
MPU only)

D1225

The counting mode of the 1st group counters (C241, C246, C251)

D1226

The counting mode of the 2nd group counters (C242, C247, C252)

D1227

The counting mode of the 3rd group counters (C243, C248, C253)

D1228

The counting mode of the 4th group counters (C244, C249, C254)
Counting modes of HHSC0 ~ HHSC3 in EH/EH2/SV/EH3/SV2 series MPU
(default = 2)

D1225 ~ D1228

1: Normal frequency counting mode
2: Double frequency counting mode
3: Triple frequency counting mode
4: 4 times frequency counting mode

7-14

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

54

D

Bit Devices
X

S1
S2
D

Function
High Speed Counter Reset

HSCR

Type
OP

Operands

Word Devices

Y

M

S

*

*

*

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*

E
*

F DHSCR: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Comparative value

S2: No. of high speed counter

D: Comparison result

Explanations:
1.

S2 has to designate the No. of high speed counters C235 ~ C255. See remarks of API 53 DHSCS for more
details.

2.

D of EH/EH2/SV series MPU can designate the No. of high speed counters C241 ~ C254 that are the same as
the counters designated by S2.

3.

D of SC series MPU can designate the No. of high speed counters C243, C245, C248, C250 and C255 that
are the same as the counters designated by S2.

4.

D of ES/EX/SS/SA/SX series MPU does not support device C.

5.

See the specifications of each model for their range of use.

6.

Flags: M1150 ~ M1333; see remarks of API 53 DHSCS for more details. ES/EX/SS/SA/SX/SC series MPU
does not support M1261 (high speed counter external reset mode designation); see remarks for more details.

7.

The high speed counter inputs counting pulses from the corresponding external input terminals X0 ~ X17 by
inserting an interruption. When the No. of high-speed counter designated in S2 “+1“ or “-1”, DHSCR will
perform a comparison immediately. When the present value in the high speed counter equals the comparative
value designated in S1, the device designated in D will turn Off and even the afterward comparison results are
unequal, the device will still be Off.

8.

If the devices designated in D are Y0 ~ Y17, when the comparative value equals the present value in the high
speed counter, the comparison result will immediately output to the external output terminals Y0 ~ Y17 (and
clear the designated Y output) and the rest of Y devices will be affected by the scan cycle. Devices M and S
act immediately without being affected by the scan cycle.

Program Example 1:
1.

When M0 = On and the present value in the high speed counter C251 changes from 99 to 100 or 101 to 100,
Y10 will be cleared and Off.

2.

When the present value in the high speed counter C251 changes from 199 to 200, the contact of C251 will be
On and make Y0 = On. However, the program scan time will delay the output.

3.

Y10 will immediately reset the status when the counting reaches its target. D is also able to designate high
speed counters of the same No. See Program Example 2.

D V P - P L C A P P L I C AT I O N M A N U A L

7-15

7 Application Instructions API 50-99
M1000
DCNT

C251

K200

DHSCR

K100

C251

SET

Y0

M0
Y10

C251

Program Example 2:
When DHSCR instruction designates the same high speed counter, and the present value in the high speed counter
C251 changes from 999 to 1,000 or 1,001 to 1,000, C251 will be reset to Off.
1,000

200

M1000
DCNT

C251

K200

DHSCR K1000

C251

Not affected by scan time
C251 output contact

C251

Affected by scan time

Remarks:
1.

DVP all series MPU support high speec counters. For the limitation on the use of instructions, see remarks of
API 53 DHSCS for more details.

2.

M1261 of EH/EH2/SV/EH3/SV2 series MPU designates the external reset modes of the high speed counter.
Some high speec counters have input points for external reset; therefore, when the input point is On, the
present value in the corresponding high speed counter will be cleared to 0 and the output contact will be Off. If
you wish the reset to be executed immediately by the external output, you have to set M1261 to be On.

3.

M1261 can only be used in the hardware high speed counter C241 ~ C255.

4.

Example:
a)

X2 is the input point for external reset of C251.

b)

Assume Y10 = On.

c)

When M1261 = Off and X2 = On, the present value in C251 will be cleared to 0 and the contact of C251 will
be Off. When DHSCR instruction is executed, there will be no counting input and the comparison result will
not output. The external output will not execute the reset; therefore Y10 = On will remain unchanged.

d)

When M1261 = On and X2 = On, the present value in C251 will be cleared to 0 and the contact of C251 will
be Off. When DHSCR instruction is executed, there will be no counting input but the comparison result will
output. Therefore, Y10 will be reset.
M1000
DCNT

C251

K1000

DHSCR

K0

C251

Y10

X10
M1261

7-16

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

55

D

Operands

Function
High Speed Zone Compare

HSZ

Type

Bit Devices
X

OP
S1
S2
S
D

Word Devices

Y

M

S

*

*

*

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*
*

E
*
*

F DHSZ: 17 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Lower bound of the comparison zone
counter

S2: Upper bound of the comparison zone

S: No. of high speed

D: Comparison result

Explanations:
1.

S1 has to be euqal to or smaller than S2. (S1 ≤ S2)

2.

When S1 > S2, the instruction will perform a comparison by using S1 as the upper bound and S2 as the lower
bound.

3.

S has to designate high speed counters C235 ~ C255, See remarks of API 53 DHSCS for more details.

4.

D will occupy 3 consecutive devices.

5.

Flags: M1150 ~ M1333; see remarks of API 53 DHSCS for more details. M1150, M1151 DHSZ executing
multiple points comparison mode; see Program Example 3 for more details; SA/SX/SC series MPU does not
support. M1152, M1153 DHSZ as frequency control mode; see Program Example 4 for more details; SA/SX/SC
series MPU does not support.

6.

The output will not be affected by the scan time.

7.

The zone comparisons and outputs are all processed by inserting interruptions.

Program Example 1:
1.

Designate device Y0 and Y0 ~ Y2 will be automatically occupied.

2.

When DHSZ instruction is being executed and the counting of the high speed counter C246 reaches upper and
lower bounds, one of Y0 ~ Y2 will be On
M1000
DCNT

C246

K20000

DHSZ

K1500

K2000

C246

Y0

Y0
When the present value in C246 < K1,500, Y0 = On
Y1
Y2

When K1,500 < present value in C246 < K2,000, Y1 = On
When the present value in C246 > K2,000, Y2 = On

D V P - P L C A P P L I C AT I O N M A N U A L

7-17

7 Application Instructions API 50-99
Program Example 2:
1.

Use DHSZ instruction for high/low speed stop control. C251 is an A-B phase high speed counter and DHSZ only
performs comparison output when there is a C251 counting pulse input. Therefore, even when the present value
in the counter is 0, Y10 will not be On.

2.

When X10 = On, DHSZ will require that Y10 has to be On when the present value in the counter ≤ K2,000. To
solve this requirement, you can execute DZCPP instruction when the program was first RUN and compare
C251 with K2,000. When the present value in the counter ≤ K2,000, Y10 will be On. DZCPP instruction is a
pulse execution instruction and will only be executed once with Y10 being kept On.

3.

When the drive contact X10 = Off, Y10 ~ Y12 will be reset to Off.
X10
RST

C251

ZRST

Y10

Y12

DCNT

C251

K10000

DZCPP

K2000

K2400

C251

Y10

DHSZ

K2000

K2400

C251

Y10

M1000
X10

4.

The timing diagram
Speed of variable speed
transmission equipment
0

X10
high speed
forward Y10
low speed
Y11
forward
Stop Y12

Present value in
counter C251

2,400
2,000

0

Program Example 3:
1.

Program Example 3 is only applicable to EH/EH2/SV/EH3/SV2 series MPU.

2.

The multiple set values comparison mode: If D of DHSZ instruction designates a special auxiliary relay M1150,
the instruction will be able to compare (output) the present value in the high speed counter with many set
values.

7-18

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
3.

In this mode,
-

S1: start device in the comparison table. S1 can only designate data register D and can be modified by E and
F. Once this mode is enabled, S1 will not be changed even the E and F has been changed.

-

S2: number of group data to be compared. S2 can only designate K1 ~ K255 or H1 ~ HFF and can be
modified by E and F. Once this mode is enabled, S2 cannot be changed. If S2 is not within its range, error
code 01EA (hex) will display and the instruction will not be executed.

4.

-

S: No. of high speed counter (designated as C241 ~ C254).

-

D: Designated mode (can only be M1150)

The No. of start register designated in S1 and the number of rows (groups) designated in S2 construct a
comparison table. Please enter the set values in every register in the table before executing the instruction.

5.

When the present value in the counter C251 designated in S equals the set values in D1 and D0, the Y output
designated by D2 will be reset to Off (D3 = K0) or On (D3 = K1) and be kept. Output Y will be processed as an
interruption. No. of Y output pointss are in decimal (range: 0 ~ 255). If the No. falls without the range,
SET/RESET will not be enabled when the comparison reaches its target.

6.

When this mode is enabled, PLC will first acquire the set values in D0 and D1 as the target value for the first
comparison section. At the same time, the index value displayed in D1150 will be 0, indicating that PLC
performs the comparison based on the group 0 data.

7.

When the group 0 data in the table have been compared, PLC will first execute the Y output set in group 0 data
and determine if the comparison reaches the target number of groups. If the comparison reaches the target,
M1151 will be On; if the comparison has not reached the final group, the content in D1150 will plus 1 and
continue the comprison for the next group.

8.

M1151 is the flag for the completion of one execution of the table, can be Off by the user. Or when the next
comparion cycle takes place and the group 0 data has been compared, PLC will automatically reset the flag.

9.

When the drive contact of the instruction X10 goes Off, the execution of the instruction will be interrupted and
the content in D1150 (table counting register) will be reset to 0. However, the On/Off status of all outputs will be
remained.

10.

When the instruction is being executed, all set values in the comparison table will be regarded as valid values
only when the scan arrives at END instruction for the first time.

11.

This mode can only be used once in the program.

12.

This mode can only be used on the hardware high speed counters C241 ~ C254.

13.

When in this mode, the frequency of the input counting pulses cannot exceed 50kHz or the neighboring two
groups of comparative values cannot differ by 1; otherwise there will not be enough time for the PLC to react
and result in errors.
X10
DHSZ

D0

K4

D V P - P L C A P P L I C AT I O N M A N U A L

C251

M1150

7-19

7 Application Instructions API 50-99
The comparison table:
32-bit data for comparison
High word

Low word

No. of Y output

On/Off indication

Table counting
register D1150

D1

(K0)

D0

(K100)

D2

(K10)

D3

(K1)

0

D5

(K0)

D4

(K200)

D6

(K11)

D7

(K1)

1

D9

(K0)

D8

(K300)

D10 (K10)

D11 (K0)

2

D12 (K400)

D14 (K11)

D15 (K0)

3

K10: Y10

K0: Off

0→1→2→3→0

K11: Y11

K1: On

Cyclic scan

D13 (K0)

Present value
in C251
400
300
200
100
Y10
Y11
M1151
D1150

14.

0

1

2

3
0

Special registers for flags and relevant settings:
Flag

Function

M1150

DHSZ instruction in multiple set values comparison mode

M1151

The execution of DHSZ multiple set values comparison mode is completed.

Special D
D1150

Function
Table counting register for DHSZ multiple set values comparison mode

Program Example 4:
1.

Program Example 4 is only applicable to EH/EH2/SV/EH3/SV2 series MPU.

2.

DHSZ and DPLSY instructions are combined for frequency control. If D of DHSZ instruction is a special auxiliary
relay M1152, the present value in the counter will be able to control the pulse output frequency of DPLSY
instruction.

3.

In this mode,
- S1: start device in the comparison table. S1 can only designate data register D and can be modified by E and
F. Once this mode is enabled, S1 will not be changed even the E and F has been changed.
- S2: number of group data to be compared. S2 can only designate K1 ~ K255 or H1 ~ HFF and can be
modified by E and F. Once this mode is enabled, S2 cannot be changed. If S2 is not within its range, error
code 01EA (hex) will display and the instruction will not be executed.
- S: No. of high speed counter (designated as C241 ~ C254).

7-20

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
- D: Designated mode (can only be M1152)
4.

This mode can only be used once. For EH/EH2/SV/EH3/SV2 series MPU, this mode can only be used in the
hardware high speed counter C241 ~ C254. Please enter the set values in every register in the table before
executing the instruction.

5.

When this mode is enabled, PLC will first acquire the set values in D0 and D1 as the target value for the first
comparison section. At the same time, the index value displayed in D1152 will be 0, indicating that PLC
performs the comparison based on the group 0 data.

6.

When the group 0 data in the table have been compared, PLC will first execute at the frequency set in group 0
data (D2, D3) and copy the data to D1152 and D1153, determining if the comparison reaches the target number
of groups. If the comparison reaches the target, M1153 will be On; if the comparison has not reached the final
group, the content in D1151 will plus 1 and continue the comprison for the next group.

7.

M1153 is the flag for the completion of one execution of the table, can be Off by the user. Or when the next
comparion cycle takes place and the group 0 data has been compared, PLC will automatically reset the flag.

8.

If you wish to use this mode with PLSY instruction, please preset the value in D1152.

9.

If you wish to stop the execution at the last row, please set the value in the last row K0.

10.

When the drive contact of the instruction X10 goes Off, the execution of the instruction will be interrupted and
the content in D1151 (table counting register) will be reset to 0.

11.

When in this mode, the frequency of the input counting pulses cannot exceed 50kHz or the neighboring two
groups of comparative values cannot differ by 1; otherwise there will not be enough time for the PLC to react
and result in errors.
X10
DHSZ

D0

PLS

M0

DPLSY

D1152

K5

C251

K0

Y0

M1152

M0

The comparison table:
32-bit data for comparison
High word

Low word

Pulse output frequency
0 ~ 200kHz

Table counting
register D1151

D1

(K0)

D0

(K0)

D3, D2

(K5,000)

0

D5

(K0)

D4

(K100)

D7, D6

(K10,000)

1

D9

(K0)

D8

(K200)

D11, D10

(K15,000)

2

D13 (K0)

D12 (K300)

D15, D14

(K6,000)

3

D17 (K0)

D16 (K400)

D19, D18

(K0)

4
0→1→2→3→4
Cyclic scan

D V P - P L C A P P L I C AT I O N M A N U A L

7-21

7 Application Instructions API 50-99
Present value 500
in C251
400
300
200
100
0
(Hz)
15,000
10,000
5,000
0
M1153

D1151

12.

0

2

1

4

3

0

Special registers for flags and relevant settings:
Flag

Function

M1152

DHSZ instruction in frequency control mode

M1153

The execution of DHSZ frequency control mode is completed.

Special D
D1151

Table counting register for DHSZ multiple set values comparison mode

D1152 (low word)
D1153 (high word)
D1336 (low word)
D1337 (high word)
13.

Function

In frequency control mode, DHSZ reads the upper and lower limits in the
table counting register D1153 and D1152.
Current number of pulses output by DPLSY instruction

The complete program:
X10
DMOVP

7-22

K5000

D2

DMOVP K10000

D6

DMOVP K15000

D10

DMOVP

K6000

D14

DMOVP

K0

D18

DMOVP

K0

D0

DMOVP

K100

D4

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99

DMOVP

K200

D8

DMOVP

K300

D12

DMOVP

K400

D16

DHSZ

D0

K5

C251

PLS

M0

DPLSY

D1152

K0

Y0

M1152

M0
Frequency Number
of
pulses

Output
point

14.

During the execution of DHSZ instruction, do not modify the set values in the comparison table.

15.

The designated data will be arranged into the the above program diagram when the program executes to END
instruction. Therefore, PLSY instruction has to be executed after DHSZ instruction has been executed once.

D V P - P L C A P P L I C AT I O N M A N U A L

7-23

7 Application Instructions API 50-99
API

Mnemonic

56

SPD
Type

OP
S1
S2
D

Operands

Function
Speed Detection

Bit Devices
X
*

Y

M

Word Devices
S

Program Steps

K

H KnX KnY KnM KnS T

C

D

E

F SPD: 7 steps

*

*

*
*

*
*

*

*

*

*

*

*

*
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: External pulse input terminal

S2: Pulse receiving time (ms)

D: Detected result

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flag: M1100 (SPD instruction performs sampling for one time)

3.

External pulse input terminals designated in S1 for all series MPU:
MPU
Input
Available input points

4.

ES/EX/SS
(V5.7and above)
X1, X2

SA/SX/SC

EH

X0 / X1,

EH2/SV/EH3/SV2

X0, X1, X2, X3

X1, X2

X0 / X1,
X1, X2, X3

For SA/SX (V1.4 and above) series MPU and SC (V1.2 and above) series MPU, the new X0 and X1 can be
used together with A-B phase input points. When “A ahead of B” detection result is a positive value and “B
ahead of A” detection result is a negative value, the multiplied frequency of the counter can be set by D1022.

5.

Input points on EH series are single-phase input. EH2/SV/EH3/SV2 series support A-B phase input, and X0 has
to be designated in the instruction as the speed detection point and X1 occupied. When B is ahead of A, the
detection result will be positive value. If A is ahead of B, the detection result will be negative value.

6.

The received number of pulses of the input terminal designated in S1 is calculated within the time (in ms)
designated in S2. The result is stored in the register designated in D.

7.

D will occupy 5 consecutive devices. D + 1 and D are the detected value obtained from the previous pulses; D
+3 and D + 2 are the current accumulated number of values; D + 4 is the counting time remaining (max.
32,767ms).

8.

Pulse frequency detection for all series:
MPU

7-24

Max. frequency

ES/EX/SS (V5.7 and later versions)

X1 (20kHz), X2 (10kHz)

SA/SX/SC

X0/X1 (4kHz), X1 (30kHz), X2 (10kHz)

EH

X0 (200kHz), X1 (200kHz), X2 (20kHz), X3 (20kHz)

EH2/SV/EH3/SV2

X0/X1 (200kHz), X1 (200kHz), X2 (20kHz), X3 (20kHz)

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
9.

This instruction is mainly used for obtaining a proportional value of rotation speed. The result D and rotation
speed will be in proportion. The following equation is for obtaining the rotation speed of motor.
N: Rotation speed
60(D0)
3
n: The number of pulses produced per rotation
N=
× 10 (rpm)

nt

10.

t:

Detecting time designated in S2 (ms)

The X input point designated by this instruction cannot be used again as the pulse input terminal of the high
speed counter or as an external interruption signal.

11.

When M1036 in SC (V1.4 and above) series MPU is enabled, SPD instruction can detect the speeds at X0 ~ X5
at the same time with a total bandwidth of 40kHz. See 2.11 for more details for how to use M1036.

12.

There is no limitation on the times of using this instruction in the program, but only one instruction will be
executed at a time.

13.

When SPD instruction is enabled and M1100 = On, SPD instruction will perform a sampling at the moment when
M1100 goes from Off to On and stop the sampling. If you wish to resume the sampling, you have to turn Off
M1100 and re-enable SPD instruction.

Program Example:
1.

When X7 = On, D2 will calculate the high-speed pulses input by X1 and stop the calculation automatically after
1,000ms. The result will be stored in D0.

2.

When the 1,000ms counting is completed, D2 will be cleared to 0. When X7 is On again, D2 will start the
calculation again.
X7
SPD

X1

K1000

D0

X7
X1

D2: Present value

D0: Detected value

Content in D2
1,000ms

1,000ms

1,000
Content in D4 D4: Remaining time (ms)

Remarks:
1.

When ES/EX/SS (V5.7 and above) and SA/SX/SC series MPU use X1 or X2, the relevant high speed counters
or external interruptions I101 and I201 cannot be used.

2.

For SC (V1.4 and above) series MPU, when M1036 is enabled, the speed of X0 ~ X5 can be detected at the
same time.

D V P - P L C A P P L I C AT I O N M A N U A L

7-25

7 Application Instructions API 50-99
API

Mnemonic

57

D

Operands

Function
Pulse Y Output

PLSY

Type

Bit Devices
X

OP
S1
S2
D

Y

M

Word Devices
S

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F PLSY: 7 steps
* DPLSY: 13 steps
*

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Pulse output frequency

S2: Number of output pulses

D: Pulse output device (please use transistor output

module)
Explanations:
1.

The program of ES/EX/SS series MPU can use PLSY instruction two times but cannot designate the same Y
device.

2.

Flags: M1010 ~ M1345. See remarks for more details.

3.

S1 designates the pulse output frequency. With M1133 ~ M1135 and D1133, Y0 of SA/SX series MPU is able to
output pulses at 50kHz. SV/EH2/EH3/SV2 series MPU of V1.4 and later versions use M1190 ~ M1191, and Y0
and Y2 are able to output 0.01 ~ 500Hz.
Range of output frequency for all series:
MPU

ES/EX/SS

SA/SX

SC

EH

EH2/SV/EH3/SV2
Y0: 0 ~ 200kHz

Y0: 0 ~ 30kHz
Frequency range

Y0: 0 ~10kHz

Y0: 0 ~ 32kHz

Y1: 0 ~ 30kHz

Y0: 1 ~ 200kHz

Y2: 0 ~ 200kHz

Y1: 0 ~10kHz

Y1: 0 ~10kHz

Y10: 77 ~ 100kHz

Y2: 1 ~ 200kHz

Y4: 0 ~ 200kHz
Y6: 0 ~ 200kHz

Y11: 77 ~ 100kHz
4.

S2 designates the number of output pulses. The 16-bit instruction can designate 1 ~ 32,767 pulses and the
32-bit instruction can designate 1 ~ 2,147,483,647 pulses.
Number of continuous pulses for all series:
MPU

How to designate
continuous pulses

5.

ES/EX/SS/SA/SX/SC

SC

EH/EH2/SV/EH3/SV2

M1010 (Y0) On

The number of output

M1010 (Y0) On

M1023 (Y1) On

pulses designated for

M1023 (Y1) On

The number of output pulses designated

Y0, Y2, Y4 and Y6 is set

for Y10 and Y11 is set to K0.

to K0

For EH/EH2/SV/EH3/SV2 series MPU, when the number of output pulses is set to 0, there will be continuous
pulse output with no limitation on the number of pulses. For ES/EX/SS/SA/SX/SC series MPU, you have to
make M1010 (Y0) or M1023 (Y1) On to allow a continuous pulse output with no limitation on the number of
pulses.

7-26

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
6.

For the pulse output device designated in D, EH series MPU can designate Y0 and Y2, EH2/SV/EH3/SV2 series
MPU can designate Y0, Y2, Y4 and Y6, ES/EX/SS/SA/SX series MPU can designate Y0 and Y1, SC series
MPU can designate Y0, Y1, Y10 and Y11. (SC V1.2 and above series MPU supports Y10 and Y11).

7.

EH series MPU has two groups of A-B phase pulse output from CH0 (Y0, Y1) and CH1 (Y2, Y3);
EH2/SV/EH3/SV2 series MPU has four groups of A-B phase pulse output from CH0 (Y0, Y1), CH1 (Y2, Y3),
CH2 (Y4, Y5) and CH3 (Y6, Y7). See 2.3 and remarks for how to set up.

8.

When PLSY instruction is executed, it will designate the number of output pulses (S2) output from the output
device (D) at a pulse output frequency (S1).

9.

When PLSY instruction is used in the program, its outputs cannot be the same as those in API 58 PWM and API
59 PLSR.

10.

Pulse output completed flags for all series:
ES/EX/SS
SA/SX/SC

MPU

11.

SC

EH/EH2/SV

EH2/SV/EH3/SV2

Output device

Y0

Y1

Y10

Y11

Y0

Y2

Y4

Y6

Flag

M1029

M1030

M1102

M1103

M1029

M1030

M1036

M1037

For ES/EX/SS/SA/SX/SC/EH series MPU, when PLSY and DPLSY instruction is disabled, the pulse output
completed flags will all be Off automatically.

12.

For EH2/SV/EH3/SV2 series MPU, when PLSY and DPLSY instruction is disabled, the user will have to reset
the pulse output completed flags.

13.

The user has to reset the pulse output completed flags after the pulse output is completed.

14.

After PLSY instruction starts to be executed, Y will start a pulse output. Modifying S2 at this moment will not
affect the current output. If you wish to modify the number of output pulses, you have to first stop the execution
of PLSY instruction and modify the number.

15.

S1 can be modified when the program executes to PLSY instruction.

16.

Off time : On time of the pulse output = 1 : 1.

17.

When the program executes to PLSY instruction, the current number of output pulses will be stored in the
special data registers D1336 ~ D1339. See remarks for more details.

18.

For SA/EH series MPU, there is no limitation on the times using this instruction. For SA/SX/SC/EH series MPU,
the program allows two instructions being executed at the same time. For EH2/SV/EH3/SV2 series MPU, the
program allows four instructions being executed at the same time.

Program Example:
1.

When X0 = On, there will be 200 pulses output from Y0 at 1kHz. When the pulse output is completed, M1029
will be On and Y10 will be On.

2.

When X0 = Off, the pulse output from Y0 will stop immediately. When X0 is On again, the output will start again
ffrom the first pulse.

D V P - P L C A P P L I C AT I O N M A N U A L

7-27

7 Application Instructions API 50-99
X0
PLSY

K1000

K200

Y0

M1029
Y10
0.5ms

Y0 output

1

2

3

200

1ms

Remarks:
1. Flags and special registers for ES/EX/SS series MPU:
M1010:

When On, Y0 output will be continuous with no limitation on the number of pulses. When Off, the
number of output pulses from Y0 will be decided by S2.

M1023:

When On, Y1 output will be continuous with no limitation on the number of pulses. When Off, the
number of output pulses from Y1 will be decided by S2.

M1029:

On when Y0 pulse output is completed.

M1030:

On when Y1 pulse output is completed.

M1078:

Y0 output pauses.

M1079:

Y1 output pauses.

D1030:

Low word of the current number of output pulses from Y0

D1031:

High word of the current number of output pulses from Y0

D1032:

Low word of the current number of output pulses from Y1

D1033:

High word of the current number of output pulses from Y1

2. Flags and special registers for SA/SX/SC series MPU:
M1010:

(SA/SX/SC) When On, Y0 output will be continuous with no limitation on the number of pulses.
When Off, the number of output pulses from Y0 will be decided by S2.

M1023:

(SA/SX/SC) When On, Y1 output will be continuous with no limitation on the number of pulses.
When Off, the number of output pulses from Y1 will be decided by S2.

M1029:

(SA/SX/SC) On when Y0 pulse output is completed.

M1030:

(SA/SX/SC) On when Y1 pulse output is completed.

M1078:

(SA/SX/SC) Y0 output pauses.

M1079:

(SA/SX/SC) Y1 output pauses.

M1102:

(SC) On when Y10 pulse output is completed.

M1103:

(SC) On when Y11 pulse output is completed.

M1347:

(SA/SC) Auto zero return after Y0 output is completed.
(Available only in SA V1.8 and later versions, SC V1.6 and later versions)

M1348:

(SA/SC) Auto zero return after Y1 output is completed.
(Available only in SA V1.8 and later versions, SC V1.6 and later versions)

7-28

M1524:

(SC) Auto zero return after Y10 output is completed. (Available only in V1.6 and later versions)

M1525:

(SC) Auto zero return after Y11 output is completed. (Available only in V1.6 and later versions)
D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
D1030:

(SA/SX/SC) Low word of the current number of output pulses from Y0

D1031:

(SA/SX/SC) High word of the current number of output pulses from Y0

D1032:

(SA/SX/SC) Low word of the current number of output pulses from Y1

D1033:

(SA/SX/SC) High word of the current number of output pulses from Y1

D1348:

(SC) Low word of the current number of output pulses from Y10

D1349:

(SC) High word of the current number of output pulses from Y10

D1350:

(SC) Low word of the current number of output pulses from Y11

D1351:

(SC) High word of the current number of output pulses from Y11

3. Flags and special registers for EH/EH2/SV/EH3/SV2 series MPU:
M1010:

(EH/EH2/SV/EH3/SV2) When On, CH0, CH1, CH2 and CH3 will output pulses at END instruction.
Off when the output starts.

M1029:

(EH/EH2/SV/EH3/SV2) On when CH0 pulse output is completed.

M1030:

(EH/EH2/SV/EH3/SV2) On when CH1 pulse output is completed.

M1036:

(EH2/SV/EH3/SV2) On when CH2 pulse output is completed.

M1037:

(EH2/SV/EH3/SV2) On when CH3 pulse output is completed.

M1190:

(EH2/SV/EH3/SV2) Able to output 0.01 ~ 500Hz when PLSY Y0 high-speed output is enabled.

M1191:

(EH2/SV/EH3/SV2) Able to output 0.01 ~ 500Hz when PLSY Y2 high-speed output is enabled.

M1334:

(EH/EH2/SV/EH3/SV2) CH0 pulse output pauses.

M1335:

(EH/EH2/SV/EH3/SV2) CH1 pulse output pauses.

M1520:

(EH2/SV/EH3/SV2) CH2 pulse output pauses.

M1521:

(EH2/SV/EH3/SV2) CH3 pulse output pauses.

M1336:

(EH/EH2/SV/EH3/SV2) CH0 pulse output has been sent.

M1337:

(EH/EH2/SV/EH3/SV2) CH1 pulse output has been sent.

M1522:

(EH2/SV/EH3/SV2) CH2 pulse output has been sent.

M1523:

(EH2/SV/EH3/SV2) CH3 pulse output has been sent.

M1338:

(EH/EH2/SV/EH3/SV2) CH0 offset pulses enabled.

M1339:

(EH/EH2/SV/EH3/SV2) CH1 offset pulses enabled.

M1340:

(EH/EH2/SV/EH3/SV2) I110 interruption occurs after CH0 pulse output is completed.

M1341:

(EH/EH2/SV/EH3/SV2) I120 interruption after occurs CH1 pulse output is completed.

M1342:

(EH/EH2/SV/EH3/SV2) I130 interruption occurs when CH0 pulse output is sending.

M1343:

(EH/EH2/SV/EH3/SV2) I140 interruption occurs when CH0 pulse output is sending.

M1344:

(EH/EH2/SV/EH3/SV2) CH0 pulse compensation enabled.

M1345:

(EH/EH2/SV/EH3/SV2) CH1 pulse compensation enabled.

M1347:

(EH/EH2/SV/EH3/SV2) CH0 pulse output reset flag

M1348:

(EH/EH2/SV/EH3/SV2) CH1 pulse output reset flag

M1524:

(EH2/SV/EH3/SV2) CH2 pulse output reset flag

M1525:

(EH2/SV/EH3/SV2) CH3 pulse output reset flag

D V P - P L C A P P L I C AT I O N M A N U A L

7-29

7 Application Instructions API 50-99
D1220:

(EH/EH2/SV/EH3/SV2) Phase setting of CH0 (Y0, Y1): D1220 determines the phase by the last
two bits; other bits are invalid.
1.
2.
3.
4.

D1221:

K0: Y0 output
K1: Y0, Y1 AB-phase output; A ahead of B.
K2: Y0, Y1 AB-phase output; B ahead of A.
K3: Y1 output

(EH/EH2/SV/EH3/SV2) Phase setting of CH1 (Y2, Y3): D1221 determines the phase by the last
two bits; other bits are invalid.

D1229:

1. K0: Y2 output
2. K1: Y2, Y3 AB-phase output; A ahead of B.
3. K2: Y2, Y3 AB-phase output; B ahead of A.
4. K3: Y3 output
(EH2/SV/EH3/SV2) Phase setting of CH2 (Y4, Y5): D1229 determines the phase by the last two
bits; other bits are invalid.

D1230:

1. K0: Y4 output
2. K1: Y4, Y5 AB-phase output; A ahead of B.
3. K2: Y4, Y5 AB-phase output; B ahead of A.
4. K3: Y5 output
(EH2/SV/EH3/SV2) Phase setting of CH3 (Y6, Y7): D1230 determines the phase by the last two
bits; other bits are invalid.

7-30

D1328:

1. K0: Y6 output
2. K1: Y6, Y7 AB-phase output; A ahead of B.
3. K2: Y6, Y7 AB-phase output; B ahead of A.
4. K3: Y7 output
(EH/EH2/SV/EH3/SV2) Low word of the number of CH0 offset pulses

D1329:

(EH/EH2/SV/EH3/SV2) High word of the number of CH0 offset pulses

D1330:

(EH/EH2/SV/EH3/SV2) Low word of the number of CH1 offset pulses

D1331:

(EH/EH2/SV/EH3/SV2) High word of the number of CH1 offset pulses

D1332:

(EH/EH2/SV/EH3/SV2) Low word of the number of remaining pulses at CH0

D1333:

(EH/EH2/SV/EH3/SV2) High word of the number of remaining pulses at CH0

D1334:

(EH/EH2/SV/EH3/SV2) Low word of the number of remaining pulses at CH1

D1335:

(EH/EH2/SV/EH3/SV2) High word of the number of remaining pulses at CH1

D1336:

(EH/EH2/SV/EH3/SV2) Low word of the current number of output pulses at CH0

D1337:

(EH/EH2/SV/EH3/SV2) High word of the current number of output pulses at CH0

D1338:

(EH/EH2/SV/EH3/SV2) Low word of the current number of output pulses at CH1

D1339:

(EH/EH2/SV/EH3/SV2) High word of the current number of output pulses at CH1

D1375:

(EH2/SV/EH3/SV2) Low word of the current number of output pulses at CH2

D1376:

(EH2/SV/EH3/SV2) High word of the current number of output pulses at CH2

D1377:

(EH2/SV/EH3/SV2) Low word of the current number of output pulses at CH3

D1378:

(EH2/SV/EH3/SV2) High word of the current number of output pulses at CH3

D1344:

(EH/EH2/SV/EH3/SV2) Low word of the number of compensation pulses at CH0

D1345:

(EH/EH2/SV/EH3/SV2) High word of the number of compensation pulses at CH0

D1346:

(EH/EH2/SV/EH3/SV2) Low word of the number of compensation pulses at CH1

D1347:

(EH/EH2/SV/EH3/SV2) High word of the number of compensation pulses at CH1
D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
4. When there are many high speed output instructions (PLSY, PWM, PLSR) for Y0 output in a program, PLC will
only execute the settings and outputs of the instruction that is first enabled.
5. More explanations on M1347 and M1348:
If M1347 and M1348 is enabled, and when the execution of PLSY instruction has been completed, M1347/M1348
will be reset automatically, i.e. you do not have to turn the status of the drive contact from Off to On before PLSY
instruction and when PLC scans to the instruction (assume the drive contact of the instruction is True), there will
still be pulse output. PLC detects the status of M1347 and M1348 when END instruction is being executed.
Therefore, when the pulse output is completed and if PLSY instruction is a continuous execution one, there will be
a scan time of delay in the next string of pulse output.
Program Example 1:

EI
FEND
M1000
I 001

DPLSY

K1000

SET

M1347

K1000

Y0

K1000

Y2

IRET
M1000
I 101

DPLSY

K1000

SET

M1348

IRET
END

Explanations:
a) Whenever X0 is triggered, Y0 will output 1,000 pulses; whenever X1 is triggered, Y2 will output 1,000 pulses.
b) When X triggers Y pulse output, there should be an interval of at least one scan time between the end of Y
pulse output and the next X-triggered output.
Program Example 2:
X1
M1347
X2
PLSY

K1000

K1000

Y0

END

Explanations:

D V P - P L C A P P L I C AT I O N M A N U A L

7-31

7 Application Instructions API 50-99
When both X1 and X2 are On, Y0 pulse output will keep operating. However, there will be a short pause (approx.
1 scan time) every 1,000 pulses before the output of the next 1,000 pulses.

7-32

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

58

PWM
Type

Function
Pulse Width Modulation

Bit Devices
X

OP

Operands

S1
S2
D

Y

M

Word Devices
S

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F PWM: 7 steps
*
*

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Pulse output width

S2: Pulse output period

D: Pulse output device (please use transistor output module)

Explanations:
1.

S1 ≤ S2.

2.

See the specifications of each model for their range of use.

3.

In ES/EX/SS series MPU, PWM instruction can only be used once in the program.

4.

Flags: See remarks for more details.

5.

Range of S1: (t) 0 ~ 32,767ms.

6.

Range of S2: (T) 1 ~ 32,767ms (but S1 ≤ S2).

7.

D for all series MPU:
MPU

ES/EX/SS/SA/SX/SC

EH

EH2/SV/EH3/SV2

Y1

Y0, Y2

Y0, Y2, Y4, Y6

Output point
8.

When PWM instruction is used in the program, its outputs cannot be the same as those of API 57 PLSY and API
59 PLSR.

9.

PWM instruction designates the pulse output width in S1 and pulse output period in S2 and outputs from output
device D.

10.

For SA/SX/SC series MPU, When, S1 ≤ 0 or S2 ≤ 0 or S1 > S2, there will be operational errors (M1067 and
M1068 will not be On), and there will be no output from the pulse output device. When S1 = S2, the pulse output
device will keep being On.

11.

For EH/EH2/SV/EH3/SV2 series MPU, When, S1 < 0 or S2 ≤ 0 or S1 > S2, there will be operational errors (M1067
and M1068 will be On), and there will be no output from the pulse output device. When S1 = 0, M1067 and
M1068 will not be On and there will be no output from the pulse output device. When S1 = S2, the the pulse
output device will keep being On.

12.

S1 and S2 can be changed when PWM instruction is being executed.

13.

For SA/EH series MPU, there is no limitation on the times using this instruction in the program. However, for EH
series MPU, two instructions are allowed to be executed at the same time; for EH2/SV/EH3/SV2 series MPU,
four instructions are allowed to be executed at the same time.

D V P - P L C A P P L I C AT I O N M A N U A L

7-33

7 Application Instructions API 50-99
Program Example:
When X0 = On, Y1 will output the pulses as below. When X0 = Off, Y1 output will also be Off.
X0
PWM

K1000

K2000

Y1

t=1,000ms

Y1 output

T=2,000ms

Remarks:
1. Flags for ES/EX/SS/SA/SX/SC series MPU:
M1070:

Y1 pulse output time unit switch. When Off: 1ms; when On: 100us

2. Flags and special registers for EH/EH2/SV/EH3/SV2 series MPU:
M1010:

(EH/EH2/SV/EH3/SV2) When On, CH0, CH1, CH2 and CH3 will output pulses when END
instruction is executed. Off when the output starts.

7-34

M1070:

(EH/EH2/SV/EH3/SV2) The setting of time unit of CH0 has to work with D1371.

M1071:

(EH/EH2/SV/EH3/SV2) The setting of time unit of CH1 has to work with D1372.

M1258:

(EH/EH2/SV/EH3/SV2) CH0 pulse output signals reverse.

M1259:

(EH/EH2/SV/EH3/SV2) CH1 pulse output signals reverse.

M1334:

(EH/EH2/SV/EH3/SV2) CH0 pulse output pauses.

M1335:

(EH/EH2/SV/EH3/SV2) CH1 pulse output pauses.

M1336:

(EH/EH2/SV/EH3/SV2) CH0 pulse output has been sent.

M1337:

(EH/EH2/SV/EH3/SV2) CH1 pulse output has been sent.

M1520:

(EH2/SV/EH3/SV2) CH2 pulse output pauses.

M1521:

(EH2/SV/EH3/SV2) CH3 pulse output pauses.

M1522:

(EH2/SV/EH3/SV2) CH2 pulse output has been sent.

M1523:

(EH2/SV/EH3/SV2) CH3 pulse output has been sent.

M1526:

(EH2/SV/EH3/SV2) CH2 pulse output signals reverse.

M1527:

(EH2/SV/EH3/SV2) CH3 pulse output signals reverse.

M1530:

(EH2/SV/EH3/SV2) The setting of time unit of CH2 has to work with D1373.

M1531:

(EH2/SV/EH3/SV2) The setting of time unit of CH3 has to work with D1374.

D1336:

(EH/EH2/SV/EH3/SV2) Low word of the current number of output pulses from CH0.

D1337:

(EH/EH2/SV/EH3/SV2) High word of the current number of output pulses from CH0.

D1338:

(EH/EH2/SV/EH3/SV2) Low word of the current number of output pulses from CH1.

D1339:

(EH/EH2/SV/EH3/SV2) High word of the current number of output pulses from CH1.

D1371:

(EH/EH2/SV/EH3/SV2) Time unit of CH0 output pulses when M1070 = On.

D1372:

(EH/EH2/SV/EH3/SV2) Time unit of CH1 output pulses when M1071 = On.

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
D1373:

(EH2/SV/EH3/SV2) Time unit of CH2 output pulses when M1530 = On.

D1374:

(EH2/SV/EH3/SV2) Time unit of CH3 output pulses when M1531 = On.

D1375:

(EH2/SV/EH3/SV2) Low word of the current number of output pulses from CH2.

D1376:

(EH2/SV/EH3/SV2) High word of the current number of output pulses from CH2.

D1377:

(EH2/SV/EH3/SV2) Low word of the current number of output pulses from CH3.

D1378:

(EH2/SV/EH3/SV2) High word of the current number of output pulses from CH3.

3. Time unit settings for EH/EH2/SV/EH3/SV2 series MPU:
You cannot modify M1070 in the program.
D1371, D1372, D1373 and D1374 determine the time unit of the output pulses from CH0, CH1, CH2 and CH3
and the default setting is K1. If your set value is not within the range, the default value will be adopted.
D1371, D1372, D1373, D1374
Time unit

K0

K1

K2

K3

10us

100us

1ms

10ms

4. When there are many high speed pulse output instructions (PLSY, PWM, PLSR) in a program for Y0 output, and
provided these instructions are being executed in the same scan period, PLC will set up and output the
instructions with the fewest steps.

D V P - P L C A P P L I C AT I O N M A N U A L

7-35

7 Application Instructions API 50-99
API

Mnemonic

59

D

Operands
Pulse Ramp

PLSR

Type

Bit Devices
X

OP
S1
S2
S3
D

Function

Y

M

Word Devices
S

K
*
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*
*
*

E
*
*
*

F PLSR: 9 steps
* DPLSR: 17 steps
*
*

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Maximum speed of pulse output

S2: Total number of output pulses

S3: Acceleration/deceleration time (ms)

D: Pulse output device (please use transistor output module)
Explanations:
1.

See the specifications of each model for their range of use.

2.

For ES/EX/SS series MPU, PLSR instruction can be used twice in the program but the outputs cannot be
overlapped.

3.

Flags: See remarks of API 57 PLSY.

4.

Range of S1: 10 ~ 32,767Hz (16-bit); 10 ~ 200,000Hz (32-bit). The maximum speed has to be 10’s multiple; if
not, the 1s digit will be left out. 1/10 of the maximum speed is the variation of one acceleration or deleration.
Please be aware if the variation reponds to the acceleration/deceleration demand from the step motor, in case
the step motor may crash.

5.

Range of S2: 110 ~ 32,767 (16-bit); 110 ~ 2,147,483,647 (32-bit). If S2 is less than 110, the pulet output will be
abnormal.

6.

Range of S3: below 5,000ms. The acceleration time and deceleration time have to be the same.
a) The acceleration/deceleration time has to be 10 times longer than the maximum scan time (D1012). If not,
the slope of accleration and deceleration will be incorrect.
b) The minimum set value of acceleration/deceleration time can be obtained from the following equation:

S 3 > 90,000
S1
If the set value is less than the result obtained from the equation, the acceleration/deceleration time will be
longer. If the set value is less than 90,000/S1, use the result of 90,000/S1 as the set value.
c) The maximum set value of acceleration/deceleration time can be obtained from the following equation:
S3 <

S2
S1

X

818

d) The speed variation is fixed to 10 steps. If the input acceleration/deceleration time is longer than the
maximum set value, the acceleration/deceleration time will follow the maximum set time. If shorter than the
minimum set value, the accleration/deceleration time will follow the minimum set time.

7-36

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
7.

D for all series MPU:
MPU

ES/EX/SS/SA/SX/SC

EH

EH2/SV/EH3/SV2

Y0, Y1

Y0, Y2

Y0, Y2, Y4, Y6

Output point
8.

EH series MPU has two groups pf A-B phase pulse output CH0 (Y0, Y1) and CH1 (Y2, Y3). EH2/SV/EH3/SV2
series MPU has four groups pf A-B phase pulse output CH0 (Y0, Y1), CH1 (Y2, Y3), CH2 (Y4, Y5) and CH3 (Y6,
Y7). See remarks of API 57 PLSY for how to set up.

9.

PLSR instruction is a pulse output instruction with acclerating and decelerating functions. The pulses accelerate
from the static status to target speed and decelerates when the target distance is nearly reached. The pulse
output will stop when the target distance is reached.

10.

When PLSR instruction is executed, after S1, S2 and S3 are set, the pulses will output from D. The output starts
at the frequency of increasing S1/10 at a time. The time forf every frequency is fixed at S3/9.

11.

S1, S2 and S3 can be changed when PLSR instruction is being executed.

12.

For ES/EX/SS/SA/SX/SC series MPU, when all the Y0 pulses have been sent, M1029 will be On; when all the
Y1 pulses have been sent, M1030 will be On. Next time when PLSR instruction is enabled, M1029 or M1030 will
be 0 again and after the pulse output is completed, it will become 1 again.

13.

For EH/EH2/SV/EH3/SV2 series MPU, when all the CH0 (Y0, Y1) pulses have been sent, M1029 will be On;
when all the CH1 (Y2, Y3) pulses have been sent, M1030 will be On; when CH2 (Y4, Y5) pulses have been sent,
M1036 will be On; when CH3 (Y6, Y7) pulses have been sent, M1037 will be On. Next time when PLSR
instruction is enabled, M1029, M1030, M1036 or M1037 will be 0 again and after the pulse output is completed,
they will become 1 again.

14.

For EH2/SV/EH3/SV2 series MPU V1.4 and later versions, when the instruction designate incorrect parameters,
the default output will become the maximum value or mininum value.

15.

During every acceleration section, the number of pulses ( frequency × time) may not all be integers. PLC will
round up the number to an integer before the output. Therefore, the acceleration time of every section may not
be exactly the same. The offset is determined upon the frequency and the decimal after rounding up. In order to
ensure the correct number of output pulses, PLC will supplement insufficient pulses in the last section.

16.

For SA/EH series MPU, there is no limitation on the times of using this instruction in the program. However, for
SA/SX/SC/EH series MPU, two instructions can be exeucted at the same time; for EH2/SV/EH3/SV2 series
MPU, four instructions can be executed at the same time.

Program Example:
1.

When X0 = On, the pulses will output at the maximum frequency 1,000Hz with the total number D10 at 3,000ms
from Y0. The frequency will increase by 1,000/10Hz at a time and every frequency will last for 3,000/9 (ms).

2.

When X10 is Off, the output will be interrupted. When X0 is On again, the counting of pulses will start from 0.
X0
PLSR

K1000

D V P - P L C A P P L I C AT I O N M A N U A L

D10

K3000

Y0

7-37

7 Application Instructions API 50-99
Output: Y0 or Y2

Pulse speed (Hz)
Time interval among Targeted speed: 10 ~ 200,000Hz
pulse outputs
10 10
= S 3 x 1/10
9
9
Every speed variation
8
8
= S 1 x 1/10
S2
7
7
6
6
10-step 5
5 10-step
variations
variations
4
4
3
3
16-bit command:110~32,767PLS
2
32-bit command:110~2,147,483,647PLS2
1
1
Time(Sec)
Accel time ( S 3)
Decel time ( S 3)
below 5,000ms
below 5,000ms

Remarks:
1.

The outputs cannot be the same as those of API 57 PLSY and API 58 PWM.

2.

When there are many high speed pulse output instructions (PLSY, PWM, PLSR) in a program for Y0 output, and
provided these instructions are being executed in the same scan period, PLC will set up and output the
instructions with the fewest steps.

3.

With M1133 ~ M1135 and D1133, Y0 of SA/SX/SC series MPU can output pulses at up to 50kHz. See 2.11 for
more details of special D and special M.
Range of output frequecies for all series:
MPU

ES/EX/SS

SA/SX/SC

EH

EH2/SV/EH3/SV2
Y0: 10 ~ 200,000Hz

Range

Y0: 10 ~ 10,000Hz

Y0: 10 ~ 30,000Hz

Y0: 10 ~ 200,000Hz

Y2: 10 ~ 200,000Hz

Y1: 10 ~ 10,000Hz

Y1: 10 ~ 30,000Hz

Y2: 10 ~ 200,000Hz

Y4: 10 ~ 200,000Hz
Y6: 10 ~ 200,000Hz

4.

Flags and special registers for SA/SC series MPU:
M1347

M1348

5.

For SA/SC. Reset flag for Y0 pulse output
(Available in SA V1.8 and later version, SC V1.6 and later versions)
For SA/SC. Reset flag for Y1 pulse output
(Availabe in SA V1.8 and later versions, SC V1.6 and later versions)

M1524

For SC (V1.6 and later versions). Reset flag for Y10 pulse output

M1525

For SC (V1.6 and later versions). Reset flag for Y11 pulse output

Flags and special registers for EH2/SV/EH3/SV2 series MPU:
M1257

The acceleration/decelration of the high-speed pulse output Y0, and that of Y2 are S
curves.

M1308

Off->On: The high-speed output of the first pulse CH0 (Y0, Y1) paruse immediately.
On->Off: Continue to output the pulses which have not been output.

M1309

7-38

Off->On: The high-speed output of the first pulse CH1 (Y2, Y3) paruse immediately.

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
On->Off: Continue to output the pulses which have not been output.
M1310

Off->On: The high-speed output of the first pulse CH2 (Y4, Y5) paruse immediately.
On->Off: Continue to output the pulses which have not been output.

M1311

Off->On: The high-speed output of the first pulse CH3 (Y6, Y7) paruse immediately.
On->Off: Continue to output the pulses which have not been output.

M1347

For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH0 pulse output

M1348

For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH1 pulse output

M1524

For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH2 pulse output

M1525

For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH3 pulse output

D1127

The number of pulses at the acceleration setion for the position instruction (low word)

D1128

The number of pulses at the acceleration setion for the position instruction (high word)

D1133

The number of pulses at the deceleration setion for the position instruction (low word)

D1134

The number of pulses at the deceleration setion for the position instruction (high word)

Functions in EH series MPU:
1.

Relevant devices for EH/EH2/SV/EH3/SV2 series MPU:
X0
PLSR

2.

K1000

D10

K3000

Y0

The range of pulse speed for this instruction is 10 ~ 200,000Hz. If the set values of maximum speed and
acceleration/deceleration time exceed the range, PLC will operate by the default value that is within the range.
Operand

S1

S2

S3

D

Max. frequency

Total number of pulses

Accel/Decel time

Output point

16-bit

10 ~ 32,767Hz

110 ~ 32,767

32-bit

10 ~ 200kHz

110 ~ 2,147,483,647

1 ~ 5,000ms

Y0 ~ Y7

Explanation
Range

Definition

K0: No output
Kn: Designated
frequency

Kn: Designated
number

Flag: M1067, M1068

See settings of D1220,
D1221

Frequency F

Maximum speed: 10 ~ 200,000Hz

Total number of output pulses
F0
Start
frequency

16-bit instruction: 110 ~ 32,767PLS
32-bit instruction: 110 ~ 2,147,483,647PLS
Accel time
1 ~ 5,000ms

3.

Decel time
1 ~ 5,000ms

The acceleration/deceleration of EH/EH2/SV/EH3/SV2 series MPU is based on the number of pulses. If the
output cannot reach the maximum acceleration frequency within the acceleration/deceleration time offered, the

D V P - P L C A P P L I C AT I O N M A N U A L

7-39

7 Application Instructions API 50-99
instruction will automatically adjust the acceleration/deceleration time and the maximum frequency.
4.

The operands have to be set before the execution of the instruction PLSR.

5.

All acceleration/deceleration instructions are included with the brake function. The brake function will be
enabled when PLC is performing acceleration and the switch contact is suddenly Off. The deceleration will
operate at the slope of the acceleration.
Frequency F
Original acceleration path
Brake path
S1

F0
Time T

7-40

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

60

IST
Type
S
D1
D2

Function
Initial State

Bit Devices
X
*

OP

Operands

Y
*

M
*

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

D

E

F IST: 7 steps

*
*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device in the designated operation mode

D1: The smallest No. of designated step in auto mode

D2: The biggest No. of designated step in auto mode
Explanations:
1. S will occupy 8 consecutive points.
2. Range of D1 and D2: for SA/SX/SC/EH/EH2/SV/EH3 /SV2 S20 ~ S899; for ES/EX/SS S20 ~ S127; D2 > D1.
3. See the specifications of each model for their range of use.
4. ES/SA series MPU does not support E, F index register modification.
5. IST instruction can only be used once in the program.
6. Flags: M1040 ~ M1047. See remarks for more details.
7. IST instruction is a handy instruction specifically for the initial status of step ladder control procedure to
accommodate special auxiliary relay.
Program Example 1:
1. Use of IST instruction
M1000
IST

S

X10

X10: Individual operation
X11: Zero return
X12: Step operation
X13: One cycle operation

S20

S60

X14: Continuous operation
X15: Zero return enabled switch
X16: Start switch
X17: Stop switch

2. When IST instruction is being executed, the following special auxiliary relays will switch automatically.
M1040: Operation forbidden
M1041: Operation starts
M1042: Pulse output enabled
M1047: STL monitor enabled

S0: Initiates manual operation
S1: Initiates zero return
S2: Initiates auto operation

3. S10 ~ S19 are for zero return and cannot be used as general steps. When S0 ~ S9 are in use, S0 ~ S2 represent
manual operation mode, zero return mode and auto operation mode. Therefore, in the program , you have to
write the circuit of the three steps in advance.
4. When switched to S1 (zero return) mode, any On in S10 ~ S19 will result in no zero return.
5. When switched to S2 (auto operation) mode, any On of the S in D1 ~ D2 or M1043 = On will result in no auto

D V P - P L C A P P L I C AT I O N M A N U A L

7-41

7 Application Instructions API 50-99
operation.
Program Example 2:
1. Robot arm control (by IST instruction):
a) Motion request: Separate the big ball and small ball and move them to different boxes. Configure the control
panel for the control.
b) Motions of the robot arm: descending, clipping ball, ascending, right shifting, releasing ball, ascending, left
shifting.
c) I/O devices:
Left-limit X1 Right-limit X2 Right-limit X3
(big)
(small)
Y0
Y3

Upper-limit X4

Y2
Y1

Lower-limit X5

Ball size
sensor X0

Small

Big

2. Operation modes:
Manual operation: Turn On/Off of the load by a single button.
Zero return: Press the zero return button to automatically zero-return the machine.
Auto operation:
a) Single step operation: Press “auto start” button for every one step forward.
b) One cycle operation: Press “auto start” button at the zero point. After a cycle of auto operation, the operation
will stops at the zero point. Press “auto stop” button in the middle of the operation to stop the operation and
press “auto start” to restart the operation. The operation will resume until it meets the zero point.
c) Continuous operation: Press “auto start” button at the zero point to resume the operation. Press “auto stop” to
operate until it meets the zero point.
3. The control panel:
Start Power

Start Zero Return X15

Auto Stop X17

Stop Power
Clip
Ball

Ascend

Right
Shift

X20

X22

X24

Release
Ball
Descend

X21

X23

Auto Start X16

Step X12
Zero Return X11

Left
Shift

X25

Manual
Operation X10

One cycle
Operation X13
Continuous
Operation X14

a) Ball size sensor X0.
b) Robot arm: left limit X1, big ball right limit X2, small ball right limit X3, upper limit X4, lower limit X5.
c) Robot arm: ascending Y0, descending Y1, right shifting Y2, left shifting Y3, clipping Y4.
Start Circuit

7-42

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
X0

X1 Y4
M1044

M1000
IST

X10

D V P - P L C A P P L I C AT I O N M A N U A L

S20

S80

7-43

7 Application Instructions API 50-99
Manual Operation Mode
S0
S

X20
SET

Y4

Clipping tightly

RST

Y4

Clipping released

X21
X22 Y1
Y0

Ascending

Y1

Descending

Y2

Right shifting

Y3

Left shifting

Interlocked

X23 Y0
X24 X4 Y3
X25 X4 Y2

Interlocked
Robot arm ascends to upper limit (X4 On)

Zero Return Mode
SFC:
S1
X15

S10

RST

Y4

Clipping released

RST

Y1

Descending stops
Robot arm ascends to upper limit (X4 On)

Y0

X4

RST

S11

Y2

Y3

X1

S12

Right shifting stops
Robot arm left shifting to left limit (X1 On)

SET

M1043

Enable zero return completed flag

RST

S12

Zero return operation completed

Ladder Diagram:
S1 X15
S
S10
S

SET

S10

Enter zero return mode

RST

Y4

Clipping released

RST

Y1

Descending stops

Y0

Robot arm ascends to upper limit (X4 On)

X4
S11
S

SET

S11

RST

Y2

Right shifting stops

S12

Robot arm left shifting to left limit (X1 On)

Y3
X1

SET
S12
S

SET
RST

7-44

M1043
S12

Enable zero return completed flag
Zero return operation completed

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Auto Operation Modes
SFC:
S2
M1041
M1044
Y1

S20
X5

X5

X0

X0

S30
T0

X4

S31
X4

X2

S32

SET

Y4

TMR

T0

S40
K30
T1

Y0

X4

S41
X4

Y2

S42

X2

X3

SET

Y4

TMR

T1

K30

Y0

Y2

X3
X5

S50

Y1

X5

S60
T2

X4

S70
X4

X1

S80

RST

Y4

TMR

T2

K30

Y0

Y3

X1

S2

D V P - P L C A P P L I C AT I O N M A N U A L

7-45

7 Application Instructions API 50-99
Ladder Diagram:
S2 M1041 M1044
S
S20
S

SET

S20

Y1

Enter auto operation mode
Robot arm descending

X5 X0
SET

S30

SET

S40

SET

Y4

Clipping tightly

TMR

T0

K30

SET

S31

X5 X0
S30
S

T0
S31
S

X4
Robot arm ascending to upper limit (X4 On)

Y0
X4
SET

S32
S

S32

X2
Right shifting

Y2
X2

S40
S

SET

S50

SET

Y4

Clipping tightly

TMR

T1

K30

SET

S41

T1
S41
S

X4

Robot arm ascending to upper limit (X4 On)

Y0
X4
SET

S42
S

S42

X3
Right shifting

Y2
X3
SET

S50
S

S50

X5
Y1

Robot arm descending

X5
S60
S

SET

S60

RST

Y4

Clipping released

TMR

T2

K30

SET

S70

T2
S70
S

X4
Y0

Robot arm ascending to upper limit (X4 On)

X4
SET
S80
S

S80

X1
Y3

Robot arm left shifting to left limit (X1 On)

X1
S2
RET
END

7-46

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Remarks:
Flag explanations:
M1040:

When On, all step operations are forbidden.
1. Manual mode: M1040 keeps being On
2. Zero return/one cycle operation mode: Between the timing of pressing “auto stop” and “auto start”
buttons, M1040 will keep being On.
3. Step mode: M1040 keeps being On until “auto start” button is pressed.
4. Continuous operation mode: When PLC goes from STOP to RUN, M1040 will keep being On and
turn Off when “auto start” button is pressed.

M1041:

Step operation starts. Special M for initial S2 to move to the next step.
1. Manual/zero return mode: M1041 keeps being Off.
2. Step/one cycle operation mode: M1041 will only be On when “auto start” button is pressed.
3. Continuous operation mode: M1041 keeps On when “auto start” button is pressed; Off when “auto
stop” button is pressed.

M1042:

Enabling pulse output. Sending pulses once when “auto start” button is pressed.

M1043:

On when zero return is completed.

M1044:

In continuous operation mode, M1044 has to be On to more S2 to the next step.

M1045:

All output resets are forbidden.
If the machine (not at the zero point) goes
- from manual (S0) to zero return (S1)
- from auto (S2) to manual (S0)
- from auto (S2) to zero return (S1)
1. When M1045 is Off, and any of the S among D1 ~ D2 is On, SET Y output and the step in action will
be reset to Off.
2. When M1045 is On, SET Y output will be remained but the step in action will be reset to Off
If the machine executes zero return (at the zero point) and goes from zero return (S1) to manual (S0),
no matter M1045 is On or Off, SET Y output will be remained but the step in action will be reset to Off.

M1046:

STL state setting. On when any of the steps is On. When M1047 is forced On, On of any S will result in
On of M1046. D1040 ~ D1047 will record the No. of the previous 8 points before On of S.

M1047:

On for enabling STL monitor. When IST instruction starts to be executed, M1047 will be forced On. In
every scan time, as long as IST instruction is still On, M1047 will be forced On. M1047 monitors all the
S.

D1040 ~
D1047:

On status of step No. 1 ~ 8

D V P - P L C A P P L I C AT I O N M A N U A L

7-47

7 Application Instructions API 50-99
API

Mnemonic

61

D

SER

Type

Function
Search a Data Stack

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
D
n

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*
*
*
*

E

F SER, SERP: 9 steps

*

*

DSER, DSERP: 17 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Start device for data stack comparison
result

S2: Data to be compared

D: Start device for storing comparison

n: Length of data to be compared

Explanations:
1.

When S2 are used in device F, only 16-bit instruction is applicable.

2.

D will occupy 5 consecutive points.

3.

Range of n: for 16-bit instruction 1 ~ 256; for 32-bit instruction 1 ~ 128.

4.

See the specifications of each model for their range of use.

5.

The n data in the registers starting from S1 are compared with S2 and the results are stored in the registers
starting from D.

6.

In the 32-bit instruction, S1, S2, D and n will designate 32-bit registers.

7.

For D, the 16-bit counters and 32-bit counters in SA/SX/SC series MPU cannot be mixed when being used.

Program Example:
1.

When X0 = On, the data stack consist of D10 ~ D19 will be compared against D0 and the result will be stored in
D50 ~ D52. If there are equivalent values appearing during the comparison, D50 ~ D52 will all be 0.

2.

The data are compared algebraically. (-10 < 2).

3.

The No. of the register with the smallest value among the compared data will be recorded in D53; the biggest
will be recorded in D54. When there are more than one smallest value or biggest value, device D will record the
No. of the register with bigger value.
X0
SER

7-48

D10

D0

D50

K10

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99

n

S1

Content

D10

88

D11
D12
D13
D14
D15
D16
D17
D18
D19

100
110
150
100
300
100
5
100
500

Data to be
compared
S2

D0 = K100

D V P - P L C A P P L I C AT I O N M A N U A L

Data No.

Result

0
1
2
3
4
5
6
7
8
9

Equal
Equal

D

Content

D50

4

D51
D52
D53
D54

1
8
7
9

Description
Total number of data with
equivalent values
No. of the first equivalent value
No. of the last equivalent value
No. of the smallest value
No. of the biggest value

Equal
Smallest
Equal
Biggest

7-49

7 Application Instructions API 50-99

API

Mnemonic

62

D

Operands

Function
Absolute Drum Sequencer

ABSD

Type

Bit Devices
X

OP

Y

S1
S2
D
n

M

*

*

Word Devices
S

K

H KnX KnY KnM KnS T
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E

F ABSD: 9 steps
DABSD: 17 steps

*
*

*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Start device in the data table

S2: No. of counter

D: Start No. of the devices for the comparison results

n: Number of data for comparison
Explanations:
1.

When S1 designates KnX, KnY, KnM and KnS, the 16-bit instruction has to designate K4 and 32-bit instruction
has to designate K8.

2.

For SA/SX/SC series MPU, S2 only supports C device.

3.

Range of n: 1 ~ 64

4.

See the specifications of each model for their range of use.

5.

ABSD instruction is for the absolute control of the multiple output pulses generated by the present value in the
counter.

6.

S2 of DABSD instruction can designate high speed counters. However, when the present value in the high
speed counter is compared with the target value, the result cannot output immediately owing to the scan time. If
an immediate output is required, please use DHSZ instruction that is exclusively for high speed counters.

Program Example:
1.

Before the execution of ABSD instruction, use MOV instruction to write all the set values into D100 ~ D107 in
advance. The even-number D is for lower bound value and the odd-number D is for upper bound value.

2.

When X10 = On, the present value in counter C10 will be compared with the four groups of lower and upper
bound values in D100 ~ D107. The comprison results will be stored in M10 ~ M13.

3.

When X10 = Off, the original On/Off status of M10 ~ M13 will be remained.
X10
C10

ABSD

D100

RST

C10

CNT

C10

C10

M10

K4

X11

X11

4.

K400

M10~ M13 will be On when the present value in C10 ≦ upper bound value or ≧ lower bound value.
Lower bound value

7-50

Upper bound value

Present value in C10

Output
D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99

5.

D100 = 40

D101 = 100

40 ≦ C10 ≦ 100

M10 = On

D102 = 120

D103 = 210

120 ≦ C10 ≦ 210

M11 = On

Lower bound value

Upper bound value

Present value in C10

Output

D104 = 140

D105 = 170

140 ≦ C10 ≦ 170

M12 = On

D106 = 150

D107 = 390

150 ≦ C10 ≦ 390

M13 = On

If the lower bound value > upper bound value, when C10 < upper bound value (60) or > upper bound value (140),
M12 will be On.
Lower bound value

Upper bound value

Present value in C10

Output

D100 = 40

D101 = 100

40 ≦ C10 ≦ 100

M10 = On

D102 = 120

D103 = 210

120 ≦ C10 ≦ 210

M11 = On

D104 = 140

D105 = 60

60 ≦ C10 ≦ 140

M12 = On

D106 = 150

D107 = 390

150 ≦ C10 ≦ 390

M13 = On

40

100

M10
120

210

M11
60

140

M12
150

390

M13
0

200

D V P - P L C A P P L I C AT I O N M A N U A L

400

7-51

7 Application Instructions API 50-99
API

Mnemonic

63

INCD
Type

Function
Incremental Drum Sequencer

Bit Devices
X

OP

Operands

Word Devices

Y

M

S

*

*

*

S1
S2
D
n

K

H KnX KnY KnM KnS T
*
*
*
*
*

*

*

Program Steps
C
*
*

D
*

E

F INCD: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Start device in the data table

S2: No. of counter

D: Start No. of the devices for the comparison results

n: Number of data for comparison
Explanations:
1. When S1 designates KnX, KnY, KnM and KnS, it has to designate K4.
2. In the 16-bit instruction, S2 has to designate C0 ~ C198 and will occupy 2 consecutive No. of counters.
3. Range of n: 1 ~ 64
4. See the specifications of each model for their range of use.
5. Flag: M1029 (instruciton execution completed)
6. INCD instruction is for the relative control of the multiple output pulses generated by the present value in the
counter.
7. The present value in S2 is compared with S1. S2 will be reset to 0 whenever a comparison is completed. The
current number of data processed in temporarily stored in S2 + 1.
8. When n data have been processed, M1029 will be On for one scan period.
Program Example:
1.

Before the execution of INCD instruction, use MOV instruction to write all the set values into D100 ~ D104 in
advance. D100 = 15, D101 = 30, D102 = 10, D103 = 40, D104 = 25.

2.

The present value in C10 is compared against the set values in D100 ~ D104. The present value will be reset to
0 whenever a comparison is completed.

3.

The current number of data having been processed is temporarily stored in C11.

4.

The number of times of reset is temporarily stored in C11.

5.

Whenever the content in C11 pluses 1, M10 ~ M14 will also correspondingly change. See the timing diagram
below.

6.

After the 5 groups of data have been compared, M1029 will be On for one scan period.

7.

When X0 goes from On to Off, C10 and C11 will both be reset to 0 and M10 ~ M14 will all be Off. When X0 is On
again, the instruction will start its execution again from the beginning.
X0

7-52

M1013
CNT

C10

K100

INCD

D100

C10

M10

K5

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
X0
40

30
C10

15

25

10

30
15

15

Present value

C11
Present value 0

1

2

3

4
0 1 0

1

M10
M11
M12
M13
M14
M1029

D V P - P L C A P P L I C AT I O N M A N U A L

7-53

7 Application Instructions API 50-99
API

Mnemonic

64

TTMR
Type

Function
Teaching Timer

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

D
n

K

H KnX KnY KnM KnS T

*

*

Program Steps
C

D
*

E

F TTMR: 5 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device No. for storing the “On” time of button switch

n: Multiple setting

Explanations:
1.

D will occupy 2 consecutive devices.

2.

Range of n: 0 ~ 2

3.

See the specifications of each model for their range of use.

4.

For SA series MPU, TTMR instruction can be used 8 times in the program.

5.

The “On” time (unit: 100ms) of the external button switch is stored in device No. D + 1. The “On” time (unit:
second) of the switch is multiplied by n and stored in D.

6.

Multiple setting:
When n = 0, unit of D = second
When n = 1, unit of D = 100ms (D × 10)
When n = 2, unit of D = 10ms (D × 100)

Program Example 1:
1.

The “On” (being pressed) time of button switch X0 is stored in D1. The setting of n is stored in D0. Therefore, the
button switch will be able to adjust the set value in the timer.

2.

When X0 goes Off, the content in D1 will be cleared to 0, but the content in D0 will remain.
X0
TTMR

D0

K0

X0

D1
D1

D0

T
On time (sec)

3.

D0

T
On time (sec)

Assume the “On” time of X0 is T (sec.), see the relation between D0, D1 and n in the table below.
n

7-54

D0

D1 (unit: 100ms)

K0 (unit: s)

1×T

D1 = D0 × 10

K1 (unit: 100 ms)

10 × T

D1 = D0

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
n

D0

K2 (unit: 10 ms)

100 × T

D1 (unit: 100ms)
D1 = D0/10

Program Example 2:
1.

Use TMR instruction to write in 10 groups of set time.

2.

Write the set values into D100 ~ D109 in advance.

3.

The timing unit for timer T0 ~ T9 is 0.1 sec. The timing unit for the teaching timer is 1 sec.

4.

Connect the 1-bit DIP switch to X0 ~ X3 and use BIN instruction to convert the set value of the switch into a bin
value and store it in E.

5.

Store the “On” time (sec.) of X10 in D200.

6.

M0 refers to the pulses generated from one scan period after the button switch of the teaching timer X10 is
released.

7.

Use the set number of the DIP switch as the indirectly designated pointer and send the content in D200 to
D100E (D100 ~ D109).
M10
TMR

T0

D100

TMR

T1

D101

TMR

T9

D109

BIN

K1X0

E

TTMR

D200

K0

PLF

M0

MOV

D200

M11

M19
M1000
X10
X10
M0
D100E

Remarks:
1.

For SA series MPU, TTMR instruction can be used 8 times in the program. But in a subroutine or interruption
subroutine, the instruction can only be used once.

2.

For EH series MPU, there is no limitation on the times using this instruction in the program and 8 instructions can
be executed at the same time.

D V P - P L C A P P L I C AT I O N M A N U A L

7-55

7 Application Instructions API 50-99
API

Mnemonic

65

STMR
Type

Operands

Function
Special Timer

Bit Devices
X

OP

Word Devices

Y

M

S

*

*

*

S
m
D

K
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D

E

F STMR: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: No. of timer

m: Set value in timer (unit: 100ms)

D: No. of start output device

Explanations:
1.

Range of S: for SA/SX/SC T0 ~ T191; for EH/EH2/SV T0 ~ T199; for EH3/SV2 T0 ~ T183

2.

Range of m: 1 ~ 32,767

3.

D will occupy 4 consecutive devices.

4.

See the specifications of each model for their range of use.

5.

STMR instruction is used for Off-delay, one shot timer and flashing sequence.

6.

The No. of timers designated by STMR instructions can be used only once.

Program Example:
1.

When X10 = On, STMR instruction will designate timer T0 and set the set value in T0 as 5 seconds.

2.

Y0 is the contact of Off-delay. When X10 goes from Off to On, Y0 will be On. When X10 goes from On to Off, Y0
will be Off after a five seconds of delay.

3.

When X10 goes from On to Off, there will be a five seconds of Y1 = On output.

4.

When X10 goes from Off to On, there will be a five seconds of Y2 = On output.

5.

When X10 goes from Off to On, Y3 will be On after a five seconds of delay. When X10 goes from On to Off, Y3
will be Off after a five seconds of delay.
X10
STMR

T0

K50

Y0

X10
Y0

5 sec

5 sec

Y1

5 sec

5 sec

Y2
Y3

6.

5 sec

5 sec

Add a b contact of Y3 after X10, and Y1 and Y2 can operate for flashing sequence output. When X10 goes Off,
Y0, Y1 and Y3 will be Off and the content in T10 will be reset to 0.

7-56

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
X10

Y3
STMR

T10

K50

Y0

X10
Y1
Y2

5 sec 5 sec

D V P - P L C A P P L I C AT I O N M A N U A L

7-57

7 Application Instructions API 50-99
API

Mnemonic

66

ALT
Type

Function
Alternate State

P

Bit Devices
X

OP

Operands

Y
*

D

M
*

Word Devices
S
*

K

H KnX KnY KnM KnS T

Program Steps
C

D

E

F ALT, ALTP: 3 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Destination device
Explanations:
1. See the specifications of each model for their range of use.
2. When ALT instruction is executed, “On” and “Off” of D will switch.
3. This instruction adopts pulse execution instructions (ATLP).
Program Example 1:
When X0 goes from Off to On, Y0 will be On. When X0 goes from Off to On for the second time, Y0 will be Off.
X0
ALTP

Y0

X0

Y0

Program Example 2:
Using a single switch to enable and disable control. At the beginning, M0 = Off, so Y0 = On and Y1 = Off. When X10
switches between On/Off for the first time, M0 will be On, so Y1 = On and Y0 = Off. For the second time of On/Off
switching, M0 will be Off, so Y0 = On and Y1 = Off.
X10
ALT

M0

M0
Y0
M0
Y1

Program Example 3:
Generating flashing. When X10 = On, T0 will generate a pulse every 2 seconds and Y0 output will switch between On
and Off following the T0 pulses.
X10

T0
TMR

T0

ALTP

Y0

K20

T0

7-58

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

67

RAMP
Type

Operands

Function
Ramp Variable Value

Bit Devices
X

OP

Y

M

Word Devices
S

S1
S2
D
n

K

H KnX KnY KnM KnS T

*

*

Program Steps
C

D
*
*
*

E

F RAMP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Start of ramp signal

S2: End of ramp signal

D: Duration of ramp signal

n: Scan times

Explanations:
1.

Range of n: 1 ~ 32,767

2.

D will occupy 2 consecutive points.

3.

See the specifications of each model for their range of use.

4.

Flags: M1026 (enabling RAMP; see remarks for more details); M1029 (RAMP execution completed).

5.

This instruction is for obtaining slope (the relation between linearity and scan time). Before using this instruction,
you have to preset the scan time.

6.

The set value of start ramp signal is pre-written in D10 and set value of end ramp signal in D11. When X10 = On,
D10 increases towards D11 through n (= 100) scans (the duration is stored in D12). The times of scans are
stored in D13.

7.

In the program, first drive M1039 = On to fix the scan time. Use MOV instruction to write the fixed scan time to
the special data register D1039. Assume the scan time is 30ms and take the above program for example, n =
J100, the time for D10 to increase to D11 will be 3 seconds (30ms × 100).

8.

When X10 goes Off, the instruction will stop its execution. When X10 goes On again, the content in D12 will be
reset to 0 for recalculation.

9.

When M1026 = Off, M1029 will be On and the content in D12 will be reset to the set value in D10.

Program Example:
When this instruction is used with analog signal outputs, it will be able to buffer START and STOP.
X10
RAMP

D10
D11

D11

D12

D10

K100

D12

D12

D11

D10

n scans

n scans

D10D11

The scan times is stored in D13

D V P - P L C A P P L I C AT I O N M A N U A L

7-59

7 Application Instructions API 50-99
Remarks:
D12 for enabling On/Off of M1026:
M1026=ON

X10

Start signal

M1029

X10

Start signal

D11

D11
D10

M1026=OFF

D12

D10

D12

M1029

Operand n in SA/SX V1.8, SC V1.6 and later versions support D device. Please be noted that the content in D can
only be modified when the instruction stops executing. Modification cannot be made in the execution of the
instruction.

7-60

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99

API

Mnemonic

68

DTM
Type

Function
Data Transform and Move

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
m
n

K

H KnX KnY KnM KnS T

*
*

*
*

Program Steps
C

D
*
*
*
*

E

F DTM: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 SV2 ES EX SS SA SX SC EH SV EH3 SV2 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Start device of the source data stack

D: Start device of the destination data stack

m: Transformation mode

n: Length of source data stack
Explanations:
1.

For parameter settings of operand m, please refer to the following description. K, H, D devices can be specified
by operand m. If the set value is not in the available range, no transformation or move operation will be
executed and no error will be detected.

2.

K, H, D devices can be specified by operand n, which indicates the length of the source data stack. The
available range for n is 1~256. If the set value falls out of available range, PLC will take the max value (256) or
the min value (1) as the set value automatically.

3.

Explanations on parameter settings of m operand:
K0: With n = 4, transform 8-bit data into 16-bit data (Hi-byte, Lo-byte) in the following rule:
Hi-byte Lo-byte

c

Hi-byte Lo-byte

d

c

d

e

e

f

f
K1: With n = 4, transform 8-bit data into 16-bit data (Lo-byte, Hi-byte) in the following rule:
Hi-byte Lo-byte

c

Hi-byte Lo-byte

d

d

c

e

f

e

f
K2: With n = 2, transform 16-bit data (Hi-byte, Lo-byte) into 8-bit data in the following rule:

D V P - P L C A P P L I C AT I O N M A N U A L

7-61

7 Application Instructions API 50-99
Hi-byte Lo-byte
Hi-byte Lo-byte

c

c

d

d

e

f

e
f

K3: With n = 2, transform 16-bit data (Lo-byte, Hi-byte) into 8-bit data in the following rule:
Hi-byte Lo-byte
Hi-byte Lo-byte

d

c

d

c

e

f

f
e

K4: With n = 3, transform 8-bit HEX data into ASCII data (higher 4 bits, lower 4 bits) in the following rule:
Hi-byte Lo-byte
Hi-byte Lo-byte

cH

c

cL

d

dH

e

dL
eH
eL

K5: With n = 3, transform 8-bit HEX data into ASCII data (lower 4 bits, higher 4 bits) in the following rule:
Hi-byte Lo-byte
Hi-byte Lo-byte

cL

c

cH

d

dL

e

dH
eL
eH

K6: When n = 4, transform 8-bit ASCII data (higher 4 bits, lower 4 bits) into HEX data in the following rule:
(ASCII value to be transformed includes 0 ~ 9 (0x30~0x39), A ~ F (0x41~0x46), and a ~ f (0x61~0x66).)

7-62

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Hi-byte Lo-byte

c

Hi-byte Lo-byte

d

c d

e

e f

f
K7: When n = 4, transform 8-bit ASCII data (lower 4 bits, higher 4 bits) into HEX data in the following rule:
Hi-byte Lo-byte

c

Hi-byte Lo-byte

d

d c

e

f e

f
K8: Transform 8-bit GPS data into 32-bit floating point data in the following rule:
Hi-byte Lo-byte

S+0

dd

S+1

mm1

S+2

mm2

S+3

mm3

S+4

4E

S+5

dd1

S+6

dd0

S+7

mm1

S+8

mm2

S+9

mm3

S+10

45

32bit Floating (S+4=H4E)

dd.mm1mm2 mm3

D+0

32bit Floating (S+4 != H4E)

–dd.mm1mm2 mm3

D+0

32bit Floating (S+10=H45)

dd1dd0.mm1mm2mm3

D+2

32bit Floating (S+10 != H45)

–dd1dd0.mm1mm2mm3

D+2

K9: Calculate the optimal frequency for positioning instructions with ramp up/ down function.
Users only need to set up the total number of pulses for positioning and the total time for positioning first,
DTM instruction will automatically calculate the optimal max output frequency as well as the optimal start
frequency for positioning instructions with ramp-up/down function such as PLSR, DDRVI and DCLLM.
Points to note:
1. When the calculation results exceed the max frequency of PLC, the output frequency will be set as 0.
2. When the total of ramp-up and ramp-down time exceeds the total time for operation, PLC will change the
total time for operation (S+2) into “ramp-up time (S+3) + ramp-down time (S+4) + 1” automatically.
Explanation on operands:
S+0, S+1: Total number of pulses for operation (32-bit)
S+2: Total time for operation (unit: ms)
S+3: Ramp-up time (unit: ms)
S+4: Ramp-down time(unit: ms)
D+0, D+1: Optimal max output frequency (unit: Hz) (32-bit)
D+2: Optimal start frequency (Unit: Hz)

D V P - P L C A P P L I C AT I O N M A N U A L

7-63

7 Application Instructions API 50-99
n: Reserved
K11: Conversion from Local Time to Local Sidereal Time
Unlike the common local time defined by time zones, local sidereal time is calculated based on actual
longitude. The conversion helps the user obtain the more accurate time difference of each location within
the same time zone.
Explanation on operands:
S+0, S+1: Longitude (32-bit floating point value; East: positive, West: negative)
S+2: Time zone (16-bit integer; unit: hour)
S+3~ S+8: Year, Month, Day, Hour, Minute, Second of local time (16-bit integer)
D+0~D+5: Year, Month, Day, Hour, Minute, Second of the converted local sidereal time (16-bit integer)
n: Reserved
Example:
Input: Longitude F121.55, Time zone: +8, Local time: AM 8:00:00, Jan/6/2011
Conversion results: AM 8:06:12, Jan/6/2011
K12: Ramp value for multiple points (16-bit)
Explanation on operands (16 bits):
S: input value
S+1, S+2….. S+n: input values for multiple points. The value of these values must be set by the following rule,
S+1 must be the smallest value, S+2 must be larger than S+1 and so on. Therefore, S+n
must be the largest value.
D: ramp value
D+1, D +2 … D+n: Range of ramp values for multiple points
n: Setting value for multiple points. The setting value is within the range between K2 ~ K50. If the setting value
exceeds the range, the instruction is not executed.
The example of a curve is as follows. (n=K4)

D+1
D
D+2
D+4
D+3

S
S+1 S+2

S+3

S+4

Explanation of the example:
1.

If S is larger than S+1 (S1) and is less than S+2 (S2), D+1 (D1) and D+2 (D2). D= ( ( S – S1) x ( D2 – D1 ) /
( S2 – S1 ) ) + D1.

2.

7-64

If S is less than S+1, D = D+1. If S is larger than S+n, D = D+n.

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
3.

The floating-point numbers are involved in the operation. The output value is rounded down to the nearest
whole digit, and then the 16-bit integer is output.

K13: Ramp value for multiple points (32-bit)
Please refer to parameter K12 for more information about the operands. The source device and the destination
device are represented by 32-bit values.
K14: Floating-point value for multiple points
Please refer to parameter K12 for more information about the operands. The source device and the destination
device are represented by 32-bit floating-point values.
K16: String combination
Explanations:
The system searches for the location of ETX (value 0x00) of the destination data string (lower 8 bits), then
copies the data string starting of the source register (lower 8 bits) to the end of the destination data string. The
source data string will be copied in byte order until the ETX (value 0x00) is reached.
Points to note:
The operand n sets the max data length after the string combination (max 256). If the ETX is not reached after
the combination, the location indicated by n will be the ETX and filled with 0x00.
The combination will be performed in the following rule:
Hi-byte Lo-byte

S+0

‘A’

S+1

‘B’

S+2

‘C’

D+0

‘a’

S+3

‘D’

D+1

‘b’

S+4

0x00

D+2

‘c’

D+3

‘A’

D+4

‘B’

Hi-byte Lo-byte

Hi-byte Lo-byte

D+0

‘a’

D+5

‘C’

D+1

‘b’

D+6

‘D’

D+2

‘c’

D+7

0x00

D+3

0x00

K17: String capture
Explanations:
The system copies the source data string (lower 8 bits) with the data length specified by operand n to the
destination registers, where the n+1 register will be filled with 0x00. If value 0x00 is reached before the specified
capture length n is completed, the capture will also be ended.
The capture will be performed in the following rule:

D V P - P L C A P P L I C AT I O N M A N U A L

7-65

7 Application Instructions API 50-99
Hi-byte Lo-byte

S+0

‘a’

S+1

‘b’

Hi-byte Lo-byte

D+0

‘a’

D+1

‘b’

S+2

‘c’

S+3

‘A’

S+4

‘B’

D+2

‘c’

S+5

‘C’

D+3

0x00

S+6

‘D’

S+7

0x00

n = k3

K18: Convert data string to floating point value
Explanations:
The system converts n words (lower 8 bits) of the source data string (decimal point is not included) to floating
point value and stores the converted value in the destination device.
Points to note:
1. Operand n sets the number of total digits for the converted floating value. Max 8 digits are applicable and
the value over n digit will be omitted. For example, n = K6, data string “123.45678” will be converted to
“123.456”.
2. When there are characters other than numbers 1~9 or the decimal point in the source data string, the
character before the decimal point will be regarded as 0, and the value after the decimal point will be
regarded as the ETX.
3. If the source data string contains no decimal point, the converted value will be displayed by a n-digit
floating point value automatically.
The conversion will be performed in the following rule:
Hi-byte Lo-byte

S+0

‘1’

S+1

‘2’

S+2

‘3’

S+3

‘.’

S+4

‘4’

S+5

‘5’

S+6

‘6’

S+7

0x00

D+0
D+1

32-bit Floating value

123.456

K19: Convert floating point value to data string
Explanations:
The system converts the floating point value in the source device S to data string with specified length n
(decimal point is not included).
Points to note:

7-66

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
1. Operand n sets the number of total digits for the floating point value to be converted. Max 8 digits are
applicable and the value over n digit will be omitted. For example, n = K6, floating value F123.45678 will be
converted to data string “123.456”.
2. When the digits of source value are more than the specified n digits, only the n digits from the left will be
converted. For example, source value F123456.78 with n=K4 will be converted as data string "1234”.
3. If the source value is a decimal value without integers, e.g. 0.1234, the converted data string will be “.1234”
where the first digit is the decimal point.
The conversion will be performed in the following rule:
Hi-byte Lo-byte

S+0
S+1

32-bit Floating value

n = k6

123.45678

D+0

‘1’

D+1

‘2’

D+2

‘3’

D+3

‘.’

D+4

‘4’

D+5

‘5’

D+6

‘6’

D+7

0x00

Program Example 1: K2, K4
1.

When M0 = ON, transform 16-bit data in D0, D1 into ASCII data in the following order: H byte - L byte - H byte Low byte, and store the results in D10 ~ D17.
M0

2.

3.

DTM

D0

D2

K2

K2

DTM

D2

D10

K4

K4

Value of source devices D0, D1:
Register

D0

D1

Value

H1234

H5678

st

When the 1 DTM instruction executes (m=K2), ELC transforms the 16-bit data (Hi-byte, Lo-byte) into 8-bit data
and move to registers D2~D5.

4.

Register

D2

D3

D4

D5

Value

H12

H34

H56

H78

When the 2nd DTM instruction executes (m=K4), ELC transforms the 8-bit HEX data into ASCII data and move
to registers D10~D17.
Register

D10

D11

D12

D13

D14

D15

D16

D17

Value

H0031

H0032

H0033

H0034

H0035

H0036

H0037

H0038

Program Example 2: K9
m = K9

D V P - P L C A P P L I C AT I O N M A N U A L

7-67

7 Application Instructions API 50-99
1.

Set up total number of pulses, total time, ramp-up time and ramp-down time in source device starting with D0.
Execute DTM instruction and the optimal max frequency as well as optimal start frequency can be obtained and
executed by positioning instructions.

2.

3.

7-68

Assume the data of source device is set up as below:
Total Pulses

Total Time

Ramp-up Time

Ramp-down Time

D0, D1

D2

D3

D4

K10000

K200

K50

K50

The optimal positioning results can be obtained as below:
Optimal max frequency

Optimal start frequency

D10, D11

D12

K70000

K3334

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

69

SORT
Type

Function
Sort Tabulated Data

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
m1
m2
D
n

K

H KnX KnY KnM KnS T

*
*

*
*

*

*

Program Steps
C

D
*

E

F SORT: 11 steps

*
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for the original data

m1: Groups of data to be sorted

D: Start device for the sorted data

n: Reference value for data sorting

m2: Number of columns of data

Explanations:
1.

Range of m1: 1 ~ 32.

2.

Range of m2: 1 ~ 6

3.

Range of n: 1 ~ m2

4.

See the specifications of each model for their range of use.

5.

Flag: M1029 (SORT execution completed).

6.

The sorted result is stored in m1 × m2 registers starting from the device designated in D. Therefore, if S and D
designate the same register, the sorted result will be the same as the data designated in S.

7.

It is better that the start No. designated in S is 0.

8.

The sorting will be completed after m1 times of scans. After the sorting is completed, M1029 will be On.

9.

There is no limitation on the times of using this instruction. However, only one instruction can be executed at a
time.

Program Example:
1. When X0 = On, the sorting will start. When the sorting is completed, M1029 will be On. DO NOT change the data
to be sorted during the execution of the instruction. If you wish to change the data, please make X0 go from Off to
On again.
X0
SORT

D0

K5

K5

D50

D100

2. Example table of data sorting

D V P - P L C A P P L I C AT I O N M A N U A L

7-69

7 Application Instructions API 50-99
Columns of data: m2
Data Column
Column

1

2

3

4

5

Students No.

Physics

English

Math

Chemistry

1

(D0) 1

(D5) 90

(D10) 75

(D15) 66

(D20) 79

2

(D1) 2

(D6) 55

(D11) 65

(D16) 54

(D21) 63

3

(D2) 3

(D7) 80

(D12) 98

(D17) 89

(D22) 90

4

(D3) 4

(D8) 70

(D13) 60

(D18) 99

(D23) 50

5

(D4) 5

(D9) 95

(D14) 79

(D19) 75

(D24) 69

Groups of data: m1

Row

Sorted data when D100 = K3.
Columns of data: m2
1

2

Data Column
3

4

5

Students No.

Physics

English

Math

Chemistry

1

(D50) 4

(D55) 70

(D60) 60

(D65) 99

(D70) 50

2

(D51) 2

(D56) 55

(D61) 65

(D66) 54

(D71) 63

3

(D52) 1

(D57) 90

(D62) 75

(D67) 66

(D72) 79

4

(D53) 5

(D58) 95

(D63) 79

(D68) 75

(D73) 69

5

(D54) 3

(D59) 80

(D64) 98

(D69) 89

(D74) 90

4

5

Column

Groups of data: m1

Row

Sorted data when D100 = K5.
Columns of data: m2
1

2

Data Column
3

Students No.

Physics

English

Math

Chemistry

1

(D50) 4

(D55) 70

(D60) 60

(D65) 99

(D70) 50

2

(D51) 2

(D56) 55

(D61) 65

(D66) 54

(D71) 63

3

(D52) 5

(D57) 95

(D62) 79

(D67) 75

(D72) 69

4

(D53) 1

(D58) 90

(D63) 75

(D68) 66

(D73) 79

5

(D54) 3

(D59) 80

(D64) 98

(D69) 89

(D74) 90

Column

Groups of data: m1

Row

7-70

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API
70

Mnemonic
D

Operands

Function
Ten Key Input

TKY

Type

Bit Devices
X
*

OP
S
D1
D2

Y
*

M
*

Word Devices
S
*

K

H KnX KnY KnM KnS T
*

*

*

Program Steps

*

*

*

C

D

E

F TKY: 7 steps

*

*

*

*

DTKY: 13 steps

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for key input

D1: Device for storing keyed-in value

D2: Key output signal

Explanations:
1. S will occupy 10 consecutive points; D2 will occupy 11 consecutive points.
2.

See the specifications of each model for their range of use.

3.

For SA series MPU, S and D2 do not support E, F index register modification.

4.

This instruction designates 10 external input points (representing decimal numbers 0 ~ 9) starting from S. The 10
points are respectively connected to 10 keys. By pressing the keys, you can enter a 4-digit decimal figure 0 ~
9,999 (16-bit instruction) or a 8-digit figure 0 ~ 99,999,999 (32-bit instruction) and store the figure in D1. D2 is
used for storing key status.

5.

There is no limitation on the times of using this instruction. However, only one instruction can be executed at a
time.

Program Example:
1.

Connect the 10 input points starting from X0 to the 10 keys (0 ~ 9). When X20 = On, the instruction will be
executed and the keyed-in values will be stored in D0 in bin form. The key status will be stored in M10 ~ M19.
X20
TKY

0V

+24V

X0

S/S

D0

M10

0

1

2

3

4

5

6

7

8

9

X0

X1

X2

X3

X4

X5

X6

X7

X10

X11

PLC

D V P - P L C A P P L I C AT I O N M A N U A L

7-71

7 Application Instructions API 50-99
0

2

1

3

4

5

6

7

8

9

number key

BCD value 1-digit BCD code

overflow

10

3

10

2

10

1

10

0

BCD value
BIN value

2.

D0

As shown in the timing chart below, the 4 points X5, X3, X0, and X1 connected to the keys are entered in order
and you can obtain the result 5,301. Store the result in D0. 9,999 is the maximum value allowed to stored in D0.
Once the value exceeds 4 digits, the highest digit will overflow.

3.

M12 = On when from X2 is pressed to the other key is pressed. Same to other keys.

4.

When any of the keys in X0 ~ X11 is pressed, one of M10 ~ 19 will be On correspondingly.

5.

M20 = On when any of the keys is pressed.

6.

When X20 goes Off, the keyed-in value prior to D0 will remain unchanged, but M10 ~ M20 will all be Off.
X0

3
4

X1
X3
X5

2
1

M10
M11
M13
M15

Key output
signal
M20

7-72

1

2

3

4

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API
71

Mnemonic
D

S
D1
D2
D3

Function
Hexadecimal Key Input

HKY

Type
OP

Operands

Bit Devices
X
*

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

D

E

F HKY: 9 steps
DHKY: 17 steps

*
*
*

*

*

*

*

*

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for key scan input

D1: Start device for key scan output

D2: Device for storing keyed-in value

D3: Key output signal
Explanations:
1.

S will occupy 4 consecutive points.

2.

D1 will occupy 4 consecutive points.

3.

D3 will occupy 8 consecutive points.

4.

See the specifications of each model for their range of use.

5.

For SA series MPU, S, D1 and D3 do not support E, F index register modification.

6.

Flags: M1029 (On whenever a matrix scan period is completed); M1167 (HKY input modes switch). See remarks
for more details.

7.

This instruction designates 4 continuous external input points starting from S and 4 continuous external input
points starting from D1 to construct a 16-key keyboard by a matrix scan. The keyed-in value will be stored in D2
and D3 is used for storing key status. If several keys are pressed at the same time, the first key pressed has the
priority.

8.

The keyed-in value is termporarily stored in D0. When the 16-bit instruction HKY is in use, 9,999 is the maximum
value D0 is able to store. When the value exceeds 4 digits, the highest digit will overflow. When the 32-bit
instruction DHKY is in use, 99,999,999 is the maximum value D0 is able to store. When the value exceeds 8
digits, the highest digit will overflow.

9.

There is no limitation on the times of using this instruction. However, only one instruction can be executed at a
time.

Program Example:
1.

Designate 4 input points X10 ~ X13 and the other 4 input points Y10 ~ Y13 to construct a 16-key keyboard.
When X4 = On, the instruction will be executed and the keyed-in value will be stored in D0 in bin form. The key
status will be stored in M0 ~ M7.
X4
HKY

X10

Y10

D V P - P L C A P P L I C AT I O N M A N U A L

D0

M0

7-73

7 Application Instructions API 50-99
2.

Key in numbers:
0

1

2

3

4

5

6

BCD value

overflow

103

102

7

8

9

number key

1-digit BCD code

101

100

BCD value
BIN value

3.

D0

Function keys input:
a)

When A is pressed, M0 will be On and retained. When
D is pressed next, M0 will be Off, M3 will be On and

F

E

D

C

B

A

M5

M4

M3

M2

M1

M0

retained.
b)

When many keys are pressed at the same time, the
first key pressed has the priority.

4.

Key output signal:
a)

When any of A ~ F is pressed, M6 will be On for once.

b)

When any of 0 ~ 9 is pressed, M7 will be On for once.

5.

When X4 goes Off, the keyed-in value prior to D0 will remain unchanged, but M0 ~ M7 will all be Off.

6.

External wiring:

24G +24V S/S

C

C

D

E

F

8

9

A

B

4

5

6

7

0

1

2

3

X10

X11

X12

X13

Y10

Y11

Y12

Y13

PLC (transistor output)

7-74

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Remarks:
1.

When this instruction is being executed, it will require 8 scans to obtain one valid keyed-in value. A scan period
that is too long or too short may result in poor keyed-in effect, which can be avoided by the following methods:
a)

If the scan period is too short, I/O may not be able to respond in time, resulting in not being able to read the
keyed-in value correctly. In this case, please fix the scan time.

b)

If the scan period is too long, the key may respond slowly. In this case, write this instruction into the time
interruption subroutine to fix the time for the execution of this instruction.

2.

3.

Functions of M1167:
a)

When M1167 = On, HKY instruction will be able to input the hexadecimal value of 0 ~ F.

b)

When M1167 = Off, HKY instruction will see A ~ F as function keys.

Functions of D1037 (only supports EH/EH2/SV/EH3/SV2 series MPU):
Write D1037 to set the overlapping time for keys (unit: ms). The overlapping time will vary upon different program
scan time and the settings in D1037.

D V P - P L C A P P L I C AT I O N M A N U A L

7-75

7 Application Instructions API 50-99
API

Mnemonic

72

DSW
Type

OP
S
D1
D2
n

Operands

Function
Digital Switch

Bit Devices
X
*

Y

M

Word Devices
S

Program Steps

K

H KnX KnY KnM KnS T

C

D

*

*

*

*

*

E

F DSW: 9 steps

*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for switch scan input
of switch

D1: Start device for switch scan output

D2: Device for storing the set value

n: Groups of switches

Explanations:
1.

Range of n: 1 ~ 2

2.

S and D1 in SA/SX/SC series MPU do not support E, F index register modification.

3.

See the specifications of each model for their range of use.

4.

Flag: M1029 (DSW execution completed)

5.

This instruction designates 4 or 8 consecutive external input points starting from S and 4 consecutive external
input points starting from D1 to scan read 1 or 2 4-digit DIP switches.The set values of DIP switches are stored in
D2. n decides to read 1 or 2 4-digit DIP switches.

6.

There is no limitation on the times of using this instruction in the program. However, for SA series MPU, only one
instruction can be executed at a time. For EH series MPU, two instructions are allowed to be executed at a time.

Program Example:
1.

The first group of DIP switches consist of X20 ~ X23 and Y20 ~ Y23. The second group of switches consist of
X24 ~ X27 and Y20 ~ Y23. When X10 = On, the instruction will be executed and the set values of the first group
switches will be read and converted into bin values before being stored in D20. The set values of the second
group switches will be read, converted into bin values and stored in D21.
X10
DSW

2.

X20

Y20

D20

K2

When X10 = On, the Y20 ~ Y23 auto scan cycle will be On. Whenever a scan cycle is completed, M1029 will be
On for a scan period.

3.

Please use transistor output for Y20 ~ Y23. Every pin 1, 2, 4, 8 shall be connected to a diode (0.1A/50V) before
connecting to the input terminals on PLC.

7-76

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
X10

Cyclic operation

0.1s

Y20
Y21

0.1s
0.1s

Y22

Interruption

0.1s

Y23

0.1s
Execution completed

M1029

4.

0.1s

Wiring for DIP swich input:
0

1

10

DIP switches for
BCD wiring

2

10

3

10

10

Must connect to a
diode (1N4148) in
series

0V

+24V

S/S

1

2

4

8

1

2

4

8

X20

X21

X22

X23

X24

X25

X26

X27

The second group

The first group

PLC
C

Y20

Y21
0

10

Y22
1

10

Y23
2

10

3

10

Remarks:
1.

When n = K1, D2 will occupy one register. When n = K2, D2 will occupy 2 consecutive registers.

2.

Follow the methods below for the transistor scan output:
a) When X10 = On, DSW instruction will be executed. When X10 goes Off, M10 will keep being On until the
scan output completes a scan cycle and go Off.
b) When X10 is used as a button switch, whenever X10 is pressed once, M10 will be reset to Off when the scan
output designated by DSW instruction completes a scan cycle. The DIP switch data will be read completely
and the scan output will only operate during the time when the button switch is pressed. Therefore, even the
scan output is a transistor type, the life span of the transistor can be extended because it does not operate
too frequently.
X10
SET

M10

DSW

X20

RST

M10

M10
Y20

D20

K2

M1029

D V P - P L C A P P L I C AT I O N M A N U A L

7-77

7 Application Instructions API 50-99
API

Mnemonic

73

SEGD
Type

Operands

Function
Seven Segment Decoder

P

Bit Devices
X

OP

Y

M

Word Devices
S

S
D

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F SEGD, SEGDP: 5 steps
*
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device to be decoded

D: Output device after the decoding

Explanations:
See the specifications of each model for their range of use.
Program Example:
When X10 = On, the contents (0 ~ F in hex) of the lower 4 bits (b0 ~ b3) of D10 will be decoded into a 7-segment
display for output. The decoded results will be stored in Y10 ~ Y17. If the content exceeds 4 bits, the lower 4 bits are
still used for the decoding.
X10
SEGD

D10

K2Y10

Decoding table of the 7-segment display:

Hex

Status of each segment

Bit
Composition
of the 7combination segment display

Data
displayed

0

0000

ON

ON

ON

ON

1

0001

OFF ON

ON

OFF OFF OFF OFF

2

0010

ON

ON

OFF

ON

ON

OFF

ON

3

0011

ON

ON

ON

ON

OFF

OFF

ON

4

0100

OFF ON

ON

OFF OFF

ON

ON

5

0101

ON

OFF ON

ON

OFF

ON

ON

6

0110

a

ON

OFF ON

ON

ON

ON

ON

7

0111

g

b

ON

ON

ON

OFF OFF

ON

OFF

8

1000

c

ON

ON

ON

ON

ON

ON

ON

ON

ON

ON

ON

OFF

ON

ON

ON

d

ON

ON

OFF

9

1001

A

1010

ON

ON

OFF

ON

ON

ON

B

1011

OFF OFF ON

ON

ON

ON

ON

C

1100

ON

OFF ON

ON

ON

OFF

D

1101

OFF ON

ON

ON

ON

OFF

ON

E

1110

ON

OFF OFF

ON

ON

ON

ON

F

1111

ON

OFF OFF

OFF

ON

ON

ON

7-78

OFF

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

74

SEGL
Type

Function
Seven Segment with Latch

Bit Devices
X

OP

Operands

Y

S
D
n

M

Word Devices
S

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*

*

*

Program Steps
C
*

D
*

E
*

F SEGL: 7 steps
*

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device to be displayed in 7-segment display

D: Start device for 7-segment display scan output

n: Polarity setting of output signal and scan signal
Explanations:
1.

Range of n: 0 ~ 7. See remarks for more details.

2.

For ES series MPU, the instruction can only be used once in the program. For EH series MPU, the instruction
can be used twice in the program. For SA series MPU, there is no limitation on the times of using the instruction,
but only one instruction can be executed at a time.

3.

For ES/EX/SS/SA/SX/SC series MPU, the last digit of D should be 0 and it does not support E, F index register
modification.

4.

Flag: M1029 (SEGL execution completed)

5.

This instruction occupies 8 or 12 continuous external input points starting from D for displaying 1 or 2 4-digit
7-segment display data and outputs of scanned signals. Every digit carries a 7-segment display drive (to convert
the BCD codes into 7-segment display signal). The drive also carries latch control signals to retain the
7-segment display.

6.

n decides there be 1 group or 2 groups of 4-digit 7-segment display and designates the polarity for the output.

7.

When there is 1 group of 4-digit output, 8 output points will be occupied. When there are 2 groups of 4-digit
output, 12 output points will be occupied.

8.

When this instruction is being executed, the scan output terminals will circulate the scan in sequence. When the
drive contact of the instruction goes from Off to On again, the scan output terminal will restart the scan again.

Program Example:
1.

When X10 = On, this instruction starts to be executed, Y10 ~ Y17 construct a 7-segment display scan circuit.
The value in D10 will be converted into BCD codes and sent to the first group 7-segment display. The value in
D11 will be converted into BCD codes as well and sent to the second group 7-segment display. If the values in
D10 and D11 exceed 9,999, operational error will occur.
X10
SEGL

2.

D10

Y10

K4

When X10 = On, Y14 ~ Y17 will circulate the scan automatically. Every cycle requires 12 scan period. Whenever
a cycle is completed, M1029 will be On for a scan period.

D V P - P L C A P P L I C AT I O N M A N U A L

7-79

7 Application Instructions API 50-99
3.

When there is 1 group of 4-digit 7-segment display, n = 0 ~ 3.
a) Connect the already decoded 7-segment display terminals 1, 2, 4, 8 in parallel an connect them to Y10 ~
Y13 on the PLC. Connect the latch terminals of each digit to Y14 ~ Y17 on the PLC.
b) When X10 = On, the instruction will be executed and the content in D10 will be sent to the 7-segment
displays in sequence by the circulation of Y14 ~ Y17.

4.

When there is 2 groups of 4-digit 7-segment display, n = 4 ~ 7.
a) Connect the already decoded 7-segment display terminals 1, 2, 4, 8 in parallel an connect them to Y20 ~
Y23 on the PLC. Connect the latch terminals of each digit to Y14 ~ Y17 on the PLC.
b) The contents in D10 are sent to the first group 7-segment display. The contents in D11 are sent the the
second group 7-segment display. If D10 = K1234 and D11 = K4321, the first group will display 1 2 3 4, and
the second group will display 4 3 2 1.

5.

Wiring of the 7-segment display scan output:

COM Y10

Y11

Y12

Y13

1

2

4

8

10 3

10 2 10

COM Y14

10

1

Y15
0

10

Y16
1

10

Y17
2

10

COM Y20

100

1
2
4
8

Y21

Y22

Y23

3

10 3

V+
The first group

10 2 10

1

10 0

1
2
4
8

V+
The second group

Remarks:
1.

ES/EX/SS series MPU (V4.9 and above) supports this instruction but only supports 1 group of 4-digit 7-segment
display and 8 points of output. This instruction can only be used once in the program. Range of n: 0 ~ 3.

2.

D of ES/EX/SS series MPU can only designate Y0.

3.

When this instruction is executed, the scan time has to be longer than 10ms. If the scan time is shorter than
10ms, please fix the scan time at 10ms.

4.

n is for setting up the polarity of the transistor output and the number of groups of the 4-digit 7-segment display.

5.

The output point must be a transistor module of NPN output type with open collector outputs. The output has to
connect to a pull-up resistor to VCC (less than 30VDC). Therefore, when output point Y is On, the signal output
will be in low voltage.

7-80

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
VCC
Pull-up resistor
Drive Y
Y

Signal output

On

PLC
6.

Positive logic (negative polarity) output of BCD code
BCD value

7.

Y output (BCDcode)

b3

b2

b1

b0

8

4

2

1

A

B

C

D

0
0
0
0
0
0
0
0
1
1

0
0
0
0
1
1
1
1
0
0

0
0
1
1
0
0
1
1
0
0

0
1
0
1
0
1
0
1
0
1

0
0
0
0
0
0
0
0
1
1

0
0
0
0
1
1
1
1
0
0

0
0
1
1
0
0
1
1
0
0

0
1
0
1
0
1
0
1
0
1

1
1
1
1
1
1
1
1
0
0

1
1
1
1
0
0
0
0
1
1

1
1
0
0
1
1
0
0
1
1

1
0
1
0
1
0
1
0
1
0

Negative logic (positive polarity) output of BCD code
BCD value

8.

Y output (BCDcode)

Signal output

b3

b2

b1

b0

8

4

2

1

A

B

C

D

0
0
0
0
0
0
0
0
1
1

0
0
0
0
1
1
1
1
0
0

0
0
1
1
0
0
1
1
0
0

0
1
0
1
0
1
0
1
0
1

1
1
1
1
1
1
1
1
0
0

1
1
1
1
0
0
0
0
1
1

1
1
0
0
1
1
0
0
1
1

1
0
1
0
1
0
1
0
1
0

0
0
0
0
0
0
0
0
1
1

0
0
0
0
1
1
1
1
0
0

0
0
1
1
0
0
1
1
0
0

0
1
0
1
0
1
0
1
0
1

Scan latched signal display
Positive logic (negative polarity)

9.

Signal output

Negative logic (positive polarity)

Y output (latch)

Output signal

Y output (latch)

Output signal

1

0

0

1

Settings of n:
Groups of 7-segment display

1 group

Y output of BCD code

+

2 groups
-

+

-

Scan latched signal display

+

-

+

-

+

-

+

-

n

0

1

2

3

4

5

6

7

+: Positive logic (negative polarity) output

-: Negative logic (positive polarity) output

10. The polarity of transistor output and the polarity of the 7-segment display input can be the same or different by
the setting of n.
D V P - P L C A P P L I C AT I O N M A N U A L

7-81

7 Application Instructions API 50-99
API

Mnemonic

75

ARWS
Type

OP
S
D1
D2
n

Operands

Function
Arrow Switch

Bit Devices
X
*

Y
*

M
*

Word Devices
S
*

K

Program Steps

H KnX KnY KnM KnS T

C

D

E

F ARWS: 9 steps

*

*

*

*

*

*
*

*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for key input
display scan output

D1: Device to be displayed in 7-segment display

D2: Start device for 7-segment

n: Polarity setting of output signal and scan signal

Explanations:
1. S will occupy 4 consecutive points.
2. Range of n: 0 ~ 3. See remarks of API 74 SEGL for more details.
3. There no limitation on the times of using this instruction in the program. However, only one instruction is allowed
to be executed at a time.
4. S and D2 of SA series MPU do not support E, F index register modification, and D2 can only designate the devices
whose last digit is 0 (e.g. Y0, Y10….)
5. See the specifications of each model for their range of use.
6. The output points designated by this instruction shall be transistor output.
7. When using this instruction, please fix the scan time, or place this instruction in the time interruption subroutine
(I6□□ ~ I8□□).
Program Example:
1.

When this instruction is executed, X20 is defined as down key, X21 is defined as up key, X22 is defined as right
key and X23 is defined as left key. The keys are used for setting up and displaying external set values. The set
values (range: 0 ~ 9,999) are stored in D20.

2.

When X10 = On, digit 103 will be the valid digit for setup. If you press the left key at this time, the valid digit will
circulate as 103 → 100 → 101 → 102 → 103 → 100.

3.

If you press the right key at this time, the valid digit will circulate as 103 → 102 → 101 → 100 → 103 → 102.
During the circulation, the digit indicators connected Y24 ~ Y27 will also be On interchangeably following the
circulation.

4.

If you press the up key at this time, the valid digit will change as 0 → 1 → 2 … → 8 → 9 → 0 →1. If you
press the down key, the valid digit will change as 0 → 9 → 8 … → 1 → 0 → 9. The changed value will also
be displayed in the 7-segment display.
X10
ARWS

7-82

X20

D20

Y20

K0

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Y24

Add up

Y25

Digit indication
LED

Y26

X21

Y27
103
Y20
Y21
Y22
Y23

102

10 1

10 0

1
2
4
8

Move to left

X23

X22

Move to right

X20
Minus down

7-segment display for the 4-digit set value

D V P - P L C A P P L I C AT I O N M A N U A L

The 4 switches are used for moving the digits
and increasing/decreasing set values.

7-83

7 Application Instructions API 50-99
API

Mnemonic

76

ASC
Type

Function
ASCII Code Conversion

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

S
D

*
PULSE

Program Steps
C

D

*

*

E

F ASC: 11 steps

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: English letter to be converted into ASCII code

D: Device for storing ASCII code

Explanations:
1.

S: enter 8 Engligh letters by using WPLSoft on computer or enter ASCII code by HPP.

2.

S in SA series MPU only accepts A, B, C, D, E, F, G, H, the 8 English character.

3.

See the specifications of each model for their range of use.

4.

Flag: M1161 (8/16 bit mode switch)

5.

If the execution of this instruction is connected to a 7-segment display, the error message can be displayed by
English letters.

Program Example:
1.

When X0 = On, convert A ~ H into ASCII code and stored it in D0 ~ D3.
X0
ASC

2.

ABC D EFGH

D0

b15
42H (B)

D1

44H (D)

43H (C)

D2

46H (F)

45H (E)

D3

48H (H)

47H (G)

Upper 8 bits

Lower 8 bits

D0

b0
41H (A)

When M1161 = On, every ASCII code converted from the letters will occupy the lower 8 bits (b7 ~ b0) of a
register. The upper 8 bits are invalid (filled by 0). One register stores a letter.

7-84

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
b15

b0

D0

00 H

41H (A)

D1
D2

00 H
00 H

42H (B)
43H (C)

D3
D4
D5
D6
D7

00 H
00 H

44H (D)

00 H
00 H
00 H

45H (E)
46H (F)
47H (G)
48H (H)

Upper 8 bits Lower 8 bits

D V P - P L C A P P L I C AT I O N M A N U A L

7-85

7 Application Instructions API 50-99
API

Mnemonic

77

Operands

Function
Print (ASCII Code Output)

PR
Type

Bit Devices
X

OP
S
D

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T
*

Program Steps
C
*

D
*

E

F PR: 5 steps

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Device for storing ASCII code

D: External ASCII code output points

Explanations:
1.

S will occupy 4 consecutive points.

2.

D will occupy 10 consecutive points.

3.

This instruction can only be used twice in the program.

4.

D in SA series MPU does not support E, F, index register modification.

5.

See the specifications of each model for their range of use.

6.

Flags: M1029 (PR execution completed); M1027 (number of PR outputs)

7.

This instruction will output the ASCII codes in the 4 registers starting from S from the output devices in the order
designated in D.

Program Example 1:
1.

Use API 76 ASC to convert A ~ H into ASCII codes and store them in D0 ~ D3 and use this instruction to output
the codes in sequence.

2.

When M1027 = Off and X10 goes On, the instruction will be executed. Designate Y10 (low bits) ~ Y17 (high bits)
as the data output points and Y20 for scan signals. Designate Y21 for the monitor signals during the execution.
In this mode, you can execute an output for 8 letters in sequence. During the output, if the drive contact goes Off,
the data output will stop immediately and all the outputs will go Off.

3.

During the execution of the instruction, when X10 goes Off, all the data output will be interrupted. When X10 is
On again, the output will be restarted.
X10
PR

D0

Y10

X10 start signal

Y10 ~ Y17 data

A B C D
T T T

H
T: scan time (ms)

Y20 scan signal
Y21 being executed

7-86

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Program Example 2:
1.

PR instruction is for outputing a string of 8 bits. When the special auxiliary relay M1027 = Off, PR is able to
execute an output of maximum 8 letters in string. When M1027 = On, PR is able to execute an output of 1 ~ 16
letters in string.

2.

When M1027 = On and X10 goes from Off to On, the instruction will be executed. Designate Y10 (low bits) ~ Y17
(high bits) as the data output points and Y20 for scan signals. Designate Y21 for the monitor signals during the
execution. In this mode, you can execute an output for 16 letters in sequence. During the output, if the drive
contact goes Off, the data output will stop after it is completed.

3.

When the string encounters 00H (NUL), the string output will finish. The letters coming after it will not be
processed.

4.

When X10 goes from On to Off, the data output will automatically stop after one cycle. If X10 keeps being On,
M1029 will not be enabled.
M1002
SET

M1027

PR

D0

X10
Y10

X10 start signal
Y10 ~ Y17 data

First letter

T

T

T

Last letter
T: scan time or the time of
the inserted interruption

Y20 scan signal
Y21 being executed
M1029 (execution completed)

Remarks:
1.

Please use transistor output for the output designated by this instruction.

2.

When using this instruction, please fix the scan time or place this instruction in a timed interruption subroutine.

D V P - P L C A P P L I C AT I O N M A N U A L

7-87

7 Application Instructions API 50-99
API
78

Mnemonic
D

FROM

Type
OP

Operands

Function
Read CR Data in Special Modules

P

Bit Devices
X

Y

M

Word Devices
S

m1
m2
D
n

K
*
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*

Program Steps
C

D
*
*
*
*

*

E

F FROM, FROMP: 9 steps

*

*

DFROM, DFROMP: 17 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
m1: No. of special module

m2: CR# in special module to be read

D: Device for storing read data

n:

Number of data to be read at a time
Explanations:
1.

Range of m1 (16-bit and 32-bit): for ES/SA: 0 ~ 7, for EH/EH2/EH3/SV2 :0 ~ 255, for SV: 0 ~ 107.

2.

Range of m2 (16-bit and 32-bit): for ES/SA: 0 ~ 48, for EH: 0 ~ 254, for EH2/SV/EH3/SV2: 0 ~ 499.

3.

Range of n:
a) 16-bit: for ES/SA: 1 ~ (49 – m2), for EH: 1 ~ (255 – m2), for EH2/SV/EH3/SV2: 1 ~ (500 – m2).
b) 32-bit: for ES/SA: 1 ~ (49 – m2)/2, for EH: 1 ~ (255 – m2)/2, for EH2/SV/EH3/SV2: 1 ~ (500 – m2)/2.

4.

ES series MPU does not support E, F index register modification.

5.

m1, m2 and n of EH series MPU do not support word device D.

6.

Flag: M1083 (On when allowing interruptions during FROM/TO instruction).

7.

This instruction is for reading the data in the CR in special modules.

8.

The 16-bit instruction can designate D = K1 ~ K4; the 32-bit instruction can designate D = K1 ~ K8.

9.

See application examples in API 79 TO insitruction for how to calculate the No. where the special module is
located.

Program Example:
1.

Read CR#29 of special module No.0 into D0 and CR#30 into D1. Only 2 groups of data is read at a time (n = 2).

2.

When X0 = On, the instruction will be executed. When X0 = Off, the instruction will not be executed and the data
read will not be changed.
X0
FROM

7-88

K0

K29

D0

K2

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API
79

Mnemonic
D

TO

Type

Function
Write CR Data into Special Modules

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

m1
m2
S
n

K
*
*
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*

PULSE
ES EX SS SA SX SC EH SV

Program Steps
C

*

D
*
*
*
*

E

F TO, TOP: 9 steps
DTO, DTOP: 17 steps

*

*

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
m1: No. of special module

m2: CR# in special module to be written

S: Data to be written in CR

n: Number

of data to be written at a time
Explanations:
1.

Range of m1 (16-bit and 32-bit): for ES/SA: 0 ~ 7, for EH/EH2/EH3/SV2: 0 ~ 255, for SV: 0 ~ 107.

2.

Range of m2 (16-bit and 32-bit): for ES/SA: 0 ~ 48, for EH: 0 ~ 254, for EH2/SV/EH3/SV2: 0 ~ 499.

3.

Range of n:
a) 16-bit: for ES/SA: 1 ~ (49 – m2), for EH: 1 ~ (255 – m2), for EH2/SV/EH3/SV2: 1 ~ (500 – m2).
b) 32-bit: for ES/SA: 1 ~ (49 – m2)/2, for EH: 1 ~ (255 – m2)/2, for EH2/SV/EH3/SV2: 1 ~ (500 – m2)/2.

4.

ES series MPU does not support E, F index register modification.

5.

m1, m2 and n of EH series MPU do not support word device D.

6.

Flag: M1083 (On when allowing interruptions during FROM/TO instruction). See remarks for more details.

7.

This instruction is for writing the data into the CR in special modules.

8.

The 16-bit instruction can designate S = K1 ~ K4; the 32-bit instruction can designate S = K1 ~ K8.

Program Example:
1.

Use 32-bit instruction DTO to write the content in D11 and D10 into CR#13 and CR#12 of special module No.0.
Only 1 group of data is written in at a time (n = 1).

2.

When X0 = On, the instruction will be executed. When X0 = Off, the instruction will not be executed and the data
written will not be changed.
X0
DTO

3.

K0

K12

D10

K1

Operand rules
a) m1: The No. of special modules connected to PLC MPU. No. 0 is the module closest to te MPU. Maximum 8
modules are allowed to connected to a PLC MPU and they will not occupy any I/O points.
b) m2: CR#. CR (control register) is the n 16-bit memories built in the special module, numbered in decimal as
#0 ~ #n. All operation status and settings of the special module are contained in the CR.
c) FROM/TO instruction is for reading/writing 1 CR at a time. DFROM/DTO instruction is for reading/writing 2
CRs at a time.

D V P - P L C A P P L I C AT I O N M A N U A L

7-89

7 Application Instructions API 50-99
Higher 16-bit

Lower 16-bit

CR #10

CR #9

Designated CR number

d) Number of groups “n” to be transmitted: n = 2 in 16-bit instructions and n = 1 in 32-bit instructions mean
the same.
Designated device

Designated device Designated CR

Designated CR

D0

CR #5

D0

CR #5

D1
D2

CR #6
CR #7

D1
D2

CR #6
CR #7

D3
D4

CR #8
CR #9

D3
D4

CR #8
CR #9

D5

CR #10

D5

CR #10

32-bit instruction when n=3

16-bit instruction when n=6

4.

ES/EX/SS series MPU does not have M1083. During the execution of FROM/TO instruction, all external or
internal interruption subroutines will be forbidden. The interruptions are allowed only after FROM/TO instruction
finishes its execution. FROM/TO instruction can also be used in an interruption subroutine.

5.

M1083 for switching instruction modes in SA/SX/SC/EH/EH2/SV/EH3/SV2 series MPU:
a) When M1083 = Off, during the execution of FROM/TO instruction, all external or internal interruption
subroutines will be forbidden. The interruptions are allowed only after FROM/TO instruction finishes its
execution. FROM/TO instruction can also be used in an interruption subroutine.
b) When M1083 = On and an interruption signal occurs during the execution of FROM/TO instruction, the
interruption will be processed first (with a 100us delay) and the execution of FROM/TO will be stopped. After
the interruption subroutine finishes its execution, the program will jump to the next instructio of FROM/TO.
FROM/TO cannot be used in an interruption subroutine.

FROM/TO Application Example 1:
Adjust the A/D conversion curve of DVP-04AD. Set the OFFSET value of CH1 as 0V (= K0LSB) and GAIN value as
2.5V (= K2,000LSB).
M1002
TO

K0

K1

H0

K1

TO

K0

K33

H0

K1

TO

K0

K18

K0

K1

TO

K0

K24

K2000

K1

X0

1.

Write H0 to CR#1 of anlog input module No. 0 and set CH1 as mode 0 (voltage input: -10V ~ +10V).

2.

Write H0 to CR#33 and allow OFFSET/GAIN tuning in CH1 ~ CH4.

3.

When X0 goes from Off to On, write the OFFSET value K0 LSB into CR#18 and the GAIN value K2,000 LSB into

7-90

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
CR#24.
FROM/TO Application Example 2:
Adjust the A/D conversion curve of DVP-04AD. Set the OFFSET value of CH2 as 2mA (= K400LSB) and GAIN value
as 18mA (= K3,600LSB).
M1002
TO

K0

K1

H18

K1

TO

K0

K33

H0

K1

TO

K0

K19

K400

K1

TO

K0

K25

K3600

K1

X0

1. Write H18 to CR#1 of anlog input module No. 0 and set CH2 as mode 3 (current input: -20mA ~ +20mA).
2. Write H0 to CR#33 and allow OFFSET/GAIN tuning in CH1 ~ CH4.
3. When X0 goes from Off to On, write the OFFSET value K400 LSB into CR#19 and the GAIN value K3,600 LSB into
CR#25.
FROM/TO Application Example 3:
Adjust the D/A conversion curve of DVP-02DA. Set the OFFSET value of CH2 as 0mA (= K0LSB) and GAIN value as
10mA (= K1,000LSB).
M1002
TO

K1

K1

H18

K1

TO

K1

K33

H0

K1

TO

K1

K22

K0

K1

TO

K1

K28

K1000

K1

X0

1. Write H18 to CR#1 of anlog output module No. 1 and set CH2 as mode 3 (current output: 0mA ~ +20mA).
2. Write H0 to CR#33 and allow OFFSET/GAIN tuning in CH1 and CH2.
3. When X0 goes from Off to On, write the OFFSET value K0 LSB into CR#22 and the GAIN value K1,000 LSB into
CR#28.
FROM/TO Application Example 4:
Adjust the D/A conversion curve of DVP-02DA. Set the OFFSET value of CH2 as 2mA (= K400LSB) and GAIN value
as 18mA (= K3,600LSB).
1. Write H10 to CR#1 of anlog output module No. 1 and set CH2 as mode 2 (current output: +4mA ~ +20mA).
2. Write H0 to CR#33 and allow OFFSET/GAIN tuning in CH1 and CH2.
3. When X0 goes from Off to On, write the OFFSET value K400 LSB into CR#23 and the GAIN value K3,600 LSB into
CR#29.
D V P - P L C A P P L I C AT I O N M A N U A L

7-91

7 Application Instructions API 50-99
M1002
TO

K1

K1

H10

K1

TO

K1

K33

H0

K1

TO

K1

K23

K400

K1

TO

K1

K29

K3600

K1

X0

FROM/TO Application Example 5:
When DVP-04AD-S is used with DVP-02DA-S
M1000

LD=

H88

D0

FROM

K0

K0

D0

K1

TO

K0

K1

H3030

K1

TO

K0

K2

K32

K2

FROM

K0

K6

D20

K4

FROM

K1

K0

D0

K1

CMP

H49

D0

M0

INC

D100

ADD

D101

K5

D101

M1000

M1013

LD=

K4000

D100

RST

D100

LD=

K4000

D101

RST

D101

TO

K1

K1

H10

K1

TO

K1

K10

D100

K2

M1
M1

END

1. Read CR#0 of the extension module No. 0 and see if it is DVP-04AD-S: H88.
2. If D0 = H88, set the input modes: (CH1, CH3) mode 0, (CH2, CH4) mode 3.
3. Set the average times in CH1 and CH2 from CR#2 and CR#3 as K32.
4. Read the average of input signals at CH1 ~ CH4 from CR#6 ~ CR#9 and store the 4 data in D20 ~ D23.
5. Read CR#0 of the extension module No. 1 and see if it is DVP-02DA-S: H49.
6. D100 increases K1 and D101 increases K5 every second.
7. When D100 and D101 reach K4,000, they will be cleared as 0.
8. See if the model is DVP-02DA-S when M1 = On. If so, set up output mode: CH1 in mode 0 and CH2 is mode 2.
9. Write the output settings of D100 and D101 into CR#10 and CR#11. The analog output will change by the
changes in D100 and D101.

7-92

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

80

RS
Type

Function
Serial Communication Instruction

Bit Devices
X

OP

Operands

Y

M

S
m
D
n

Word Devices
S

K

H KnX KnY KnM KnS T

*

*

*

*

Program Steps
C

D
*
*
*
*

E

F RS: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for the data to be transmitted
data

m: Length of data to be transmitted

D: Start device for receiving

n: Length of data to be received

Explanations:
1.

Range of m: 0 ~ 256

2.

Range of n: 0 ~ 256

3.

See the specifications of each model for their range of use.

4.

ES series MPU does not support E, F index register modification.

5.

This instruction is a handy instruction exclusively for MPU to use RS-485 serial communication interface. The
user has to pre-store word data in S data register, set up data length m and the data receiving register D and
received data length n. If E, F index registers are used to modify S and D, the user cannot change the set values
of E and F when the instruction is being executed; otherwise errors may cause in data writing or reading.

6.

Designate m as K0 if you do not need to send data. Designate n as K0 if you do not need to receive data.

7.

There is no limitation on the times of using this instruction in the program, but only one instruction is allowed to
be executed at a time.

8.

During the execution of RS instruction, changing the data to be transmitted will be invalid.

9.

If the peripheral devices, e.g. AC motor drive, are equipped with RS-485 serial communication and its
communication format is open, you can use RS instruction to design the program for the data transmission
between PLC and the peripheral device.

10. If the communication format of the peripheral device is Modbus, DVP series PLC offers handy communication
instructions API 100 MODRD, API 101 MODWR, and API 150 MODRW, to work with the device. See
explanations of the instructions in this application manual.
11. For the special auxiliary relays M1120 ~ M1161 and special data registers D1120 ~ D1131 relevant to RS-485
communication, see remarks for more details.
Program Example 1:
1.

Write the data to be transmitted in advance into registers starting from D100 and set M1122 (sending request
flag) as On.

2.

When X10 = On, RS instruction will be executed and PLC will start to wait for the sending and receiving of data.
D100 starts to continuousl send out 10 data and when the sending is over, M1122 will be automatically reset to

D V P - P L C A P P L I C AT I O N M A N U A L

7-93

7 Application Instructions API 50-99
Off (DO NOT use the program to execute RST M1122). After 1ms of waiting, PLC will start to receive the 10 data.
Store the data in consecutive registers starting from D120.
3.

When the receiving of data is completed, M1123 will automatically be On. After the program finishes processing
the received data, M1123 has to be reset to Off and the PLC will start to wait for the sending and receiving of
data again. DO NOT use the program to continuously execute RST M1123.
M1002

Sending request
pulses

D1120

Set up communication protocol 9600,7,E,1

MOV

H86

SET

M1120

Retain communication protocol

MOV

K100

D1129

Set up communication time-out 100ms

Write in the data to be transmitted in advance
SET

M1122

RS

D100

Set up sending request

X10
Receiving
completed

K10

D120

K10

Process of received data

M1123

RST

M1123

Receiving of data is completed the flag is reset.
The flag is reset.

Program Example 2:
Switching between 8-bit mode (M1161 = On) and 16-bit mode (M1161 = Off)
1.

8-bit mode:
The head code and tail code of the data are set up by M1126 and M1130 together with D1124 ~ D1126. When
PLC is executing RS instruction, the head code and tail code set up by the user will be sent out automatically.
M1161 = On indicates PLC in 8-bit conversion mode. The 16-bit data will be divided into the higher 8 bits and
lower 8 bits. The higher 8 bits are ignored and only the lower 8 bits are valid for data transmission.
M1000
M1161
X0
RS

D100

K4

D120

K7

Sending data: (PLC -> external equipment)
STX

Head
code

D100L

D101L

D102L

D103L

source data register, starting from
the lower 8 bits of D100

ETX1

ETX2

Tail code
1

Tail code
2

length = 4

Receiving data: (External equipment -> PLC)

7-94

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
D120L

D121L

D122L

Head
code

D123L

D124L

received data register, starting from
the lower 8 bits of D120

D125L

D126L

Tail code
1

Tail code
2

length = 7

When receiving data, PLC will receive the head code and tail code of the data from the external equipment;
therefore, the user has to be aware of the setting of data length n.
2.

16-bit mode:
The head code and tail code of the data are set up by M1126 and M1130 together with D1124 ~ D1126. When
PLC is executing RS instruction, the head code and tail code set up by the user will be sent out automatically.
M1161 = Off indicates PLC in 16-bit conversion mode. The 16-bit data will be divided into the higher 8 bits and
lower 8 bits for data transmission.
M1001
M1161
X0
RS

D100

K4

D120

K7

Sending data: (PLC -> external equipment)
STX

D100L

Head
code

D100L

D101L

D101L

source data register, starting from
the lower 8 bits of D100

ETX1

ETX2

Tail code
1

Tail code
2

D122H

D123L

Tail code
1

Tail code
2

length = 4

Receiving data: (External equipment -> PLC)

D120L

Head
code

D120H

D121L

D121H

D122L

received data register, starting from
the lower 8 bits of D120
length = 7

When receiving data, PLC will receive the head code and tail code of the data from the external equipment;
therefore, the user has to be aware of the setting of data length n.
Program Example 3:
Connect PLC to VFD-B series AC motor drives (AC motor drive in ASCII Mode; PLC in 16-bit mode and M1161 = Off).
Write in the 6 data starting from parameter address H2101 in VFD-B in advance as the data to be transmitted.

D V P - P L C A P P L I C AT I O N M A N U A L

7-95

7 Application Instructions API 50-99
M1002

Sending request
pulses

MOV

H86

SET

M1120

MOV

K100

D1120

Set up communication protocol 9600,7,E,1

Retain communication protocol
D1129

Set up communication time-out 100ms

Write in data to be transmitted in advance
SET

M1122

RS

D100

Set up sending request

X10
K17

D120

K35

Receiving
completed

Process of received data
M1123
RST

M1123

Receiving of data is completed.
The flag is reset.

PLC Ö VFD-B, PLC sends “: 01 03 2101 0006 D4 CR LF “
VFD-B Ö PLC, PLC receives “: 01 03 0C 0100 1766 0000 0000 0136 0000 3B CR LF “
Registers for sent data (PLC sends out message)
Register

Data

Explanation

D100 low

‘: ’

3A H

STX

D100 high

‘0’

30 H

ADR 1

D101 low

‘1’

31 H

ADR 0

D101 high

‘0’

30 H

CMD 1

D102 low

‘3’

33 H

CMD 0

D102 high

‘2’

32 H

D103 low

‘1’

31 H

D103 high

‘0’

30 H

D104 low

‘1’

31 H

D104 high

‘0’

30 H

D105 low

‘0’

30 H

D105 high

‘0’

30 H

D106 low

‘6’

36 H

D106 high

‘D’

44 H

LRC CHK 1

D107 low

‘4’

34 H

LRC CHK 0

D107 high

CR

DH

D108 low

LF

AH

Address of AC motor drive: ADR
(1,0)
Instruction code: CMD (1,0)

Start data address

Number of data (counted by words)

Error checksum: LRC CHK (0,1)

END

Registers for received data (VFD-B responds with messages)
Register

7-96

Data

Explanation

D120 low

‘: ’

3A H

STX

D120 high

‘0’

30 H

ADR 1

D121 low

‘1’

31 H

ADR 0

D121 high

‘0’

30 H

CMD 1

D122 low

‘3’

33 H

CMD 0

D122 high

‘0’

30 H

D123 low

‘C’

43 H

Number of data (counted by byte)

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Register
D123 high

Data
‘0’

Explanation

30 H

D124 low

‘1’

31 H

D124 high

‘0’

30 H

D125 low

‘0’

30 H

D125 high

‘1’

31 H

D126 low

‘7’

37 H

D126 high

‘6’

36 H

D127 low

‘6’

36 H

D127 high

‘0’

30 H

D128 low

‘0’

30 H

D128 high

‘0’

30 H

D129 low

‘0’

30 H

D129 high

‘0’

30 H

D130 low

‘0’

30 H

D130 high

‘0’

30 H

D131 low

‘0’

30 H

D131 high

‘0’

30 H

Content of address 2101 H

Content of address 2102 H

Content of address 2103 H

Content of address 2104 H

D132 low

‘1’

31 H

D132 high

‘3’

33 H

D133 low

‘6’

36 H

D133 high

‘0’

30 H

D134 low

‘0’

30 H

D134 high

‘0’

30 H

D135 low

‘0’

30 H

D135 high

‘3’

33 H

LRC CHK 1

D136 low

‘B’

42 H

LRC CHK 0

D136 high

CR

DH

D137 low

LF

AH

Content of address 2105 H

Content of address 2106 H

END

Program Example 4:
Connect PLC to VFD-B series AC motor drives (AC motor drive in RTU Mode; PLC in 16-bit mode and M1161 = On).
Write in H12 to parameter address H2000 in VFD-B in advance as the data to be transmitted.

D V P - P L C A P P L I C AT I O N M A N U A L

7-97

7 Application Instructions API 50-99
M1002

Sending request
pulses

MOV

H86

SET

M1120

MOV

K100

SET

M1161

D1120

Set up communication protocol 9600,7,E,1

Retain communication protocol
D1129

Set up communication time-out 100ms

8-bit mode

Write in data to be transmitted in advance
SET

M1122

RS

D100

Set up sending request

X10
K8

D120

K8

M1123
Process of received data
RST

M1123

Receiving of data is completed.
The flag is reset.

PLC Ö VFD-B, PLC sends: 01 06 2000 0012 02 07
VFD-B Ö PLC, PLC receives: 01 06 2000 0012 02 07
Registers for sent data (PLC sends out messages)
Register

Data

Explanation

D100 low

01 H

Address

D101 low

06 H

Function

D102 low

20 H

D103 low

00 H

D104 low

00 H

D105 low

12 H

D106 low

02 H

CRC CHK Low

D107 low

07 H

CRC CHK High

Data address
Data content

Registers for received data (VFD-B responds with messages)
Register

Data

Explanation

D120 low

01 H

Address

D121 low

06 H

Function

D122 low

20 H

D123 low

00 H

D124 low

00 H

D125 low

12 H

D126 low

02 H

CRC CHK Low

D127 low

07 H

CRC CHK High

Data address
Data content

Remarks:
1.

Flags for the RS-485 communication of RS/MODRD/MODWR/FWD/REV/STOP/RDST/RSTEF/MODRW
instructions

7-98

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Flag

Function

M1120

For retain the communication setting. After the first program scan
is completed, the communication setting will be reset according
to the setting in the special data register D1120. When the
second program scan starts and RS instruction is being
executed, the communication settings will all be reset according
to the settings in D1120. If your communication protocol is fixed,
you can set M1120 to On and the communication protocol will not
be reset whenever
RS/MODRD/MODWR/FWD/REV/STOP/RDST/RSTEF/MODRW
instruction is executed. In this case, even the settings in D1120
are modified, the communication protocol will not be changed.

Set up and reset by the
user.

M1121

Off when the RS-485 communication data is being transmitted.

By the system.

M1122

Sending request. When you need to send out or receive data by
RS/MODRD/MODWR/FWD/REV/STOP/RDST/RSTEF/MODRW
instructions, you have to set M1122 to On by a pulse instruction.
When these instructions start to execute, PLC will start to send
out or receive data. When the data transmission is completed,
M1122 will be reset automatically.

Set up by the user; reset
automatically by the
system.

M1123

Receiving is completed. When the execution of
RS/MODRD/MODWR/FWD/REV/STOP/RDST/RSTEF/MODRW
instructions is completed, M1123 will be set to On. You can
process the data received when M1123 is On in the program.
You have to reset M1123 to Off when the process of received
data is completed.

Set up automatically by the
system; reset by the user.

M1124

Waiting for receiving. On when PLC is waiting for receiving data.

By the system.

M1125

Receiving status cleared. When M1125 = On, the waiting for
receiving status of PLC will be cleared. You have to reset M1125
to Off after the staus is cleared.

M1126

User/system defined STX/ETX selection of RS instruction (see
the next table for details.)

M1130

User/system defined STX/ETX selection of RS instruction (see
the next table for details.)

M1127

Data transmission is completed for communication instructions
(RS instruction not included)

Set up automatically by the
system; reset by the user.

M1128

Data being sent/received indication

By the systme.

M1129

Receiving time-out. If you already set up a communication
time-out in D1129 and the data have not been received
completey when the time-out set is reached, M1129 will be On.
You have to reset M1129 to Off after the problem is solved.

Set up automatically by the
system; reset by the user.

M1131

On when the data are converted into hex of
MODRD/RDST/MODRW instructions when in ASCII mode;
otherwise, M1131 is Off.

M1140

Data receiving error of MODRD/MODWR/MODRW instructions

M1141

Parameter error of MODRD/MODWR/MODRW instructions

M1142

Data receiving error of VFD-A handy commands

M1143

ASCII/RTU mode selection (used with
MODRD/MODWR/MODRW instructions). On = RTU; Off = ASCII

M1161

8/16-bit mode selection. On = 8-bit; Off = 16-bit

D V P - P L C A P P L I C AT I O N M A N U A L

Action

Set up and reset by the
user.

By the system

Set up and reset by the
user.

7-99

7 Application Instructions API 50-99
2.

Special data register for the RS-485 communication of RS/MODRD/MODWR/FWD/REV/STOP/RDST/RSTEF
/MODRW instructions
Special D
D1038

7-100

Function
For setting up the data responding delay time when a PLC MPU using RS-485
communication is used as a slave. Range: 0 ~ 10,000 (unit: 0.1ms)

D1050 ~ D1055

When MODRD/RDST instruction is executed, PLC will automatically convert the ASCII
characters in D1070 ~ D1085 into hex and store the hex value in D1050 ~ D1055.

D1070 ~ D1085

When the RS-485 communication instructions built in PLC are executed, the receiving
end will respond with a message and the messages will be stored in D1070 ~ D1085.
You can check on the responded data stored in these registers (not applicable for RS
instruction).

D1089 ~ D1099

When the RS-485 communication instructions built in PLC are executed, the data sent
will be stored in D1089 ~ D1099. You can check on whether the data sent are correct by
checking these registers (not applicable for RS instruction).

D1120

RS-485 communication protocol. See the next table for more details.

D1121

The communication address of PLC when it operates as a slave.

D1122

Remaining number of words of the data being sent

D1123

Remaining number of words of the data being received

D1124

Definition of the start word (STX). See the table above for more details.

D1125

Definition of the first end word (ETX1) of RS instruction. See the table above for more
details.

D1126

Definition of the second end word (ETX2) of RS instruction. See the table above for more
details.

D1129

Abnormal communication time-out (in ms). When D1129 = 0, there will be no time-out
occurring. When D1129 > 0 and RS/MODRD/
MODWR/FWD/REV/STOP/RDST/RSTEF/MODRW instructions are being executed, if
the first word has not been received within designated time or the time interval between
any two words exceeds the value (>0) after PLC enters the receiving mode, PLC will
automatically set M1129 to On. You can also use M1129 for handling the communication
time-out. Please be noted that you have to reset M1129 after the time-out.

D1130

Error code sent back by Modbus

D1168

For RS instruction, when the received number of words = the low byte of D1168, the
interruption I150 will be triggered.

D1169

For RS instruction, when the received data length = the low byte of D1169, the
interruption I160 will be triggered. When D1169 = 0, I160 will not be triggered.

D1256 ~ D1295

When the RS-485 communication instruction MODRW built in PLC is executed, the data
sent will be stored in D1256 ~ D1295. You can check on whether the data sent are
correct by checking these registers.

D1296 ~ D1311

For MODRW instruction, PLC will automatically convert the ASCII characters into hex.

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
3.

How to set up RS-485 communication protocol in D1120
Content
Data length

b0
b1
b2

Parity bits

b3
b4
b5
b6
b7

Stop bits
0001 (H1)
0010 (H2)
0011 (H3)
0100 (H4)
0101 (H5)
0110 (H6)
0111 (H7)
1000 (H8)
1001 (H9)
1010 (HA)
1011 (HB)
1100 (HC)
Start word

b8

1
8

00: None
01: Odd
11: Even
:
:
:
:
:
:
:
:
:
:
:
:

1 bit
2 bits
110
150
300
600
1200
2400
4800
9600
19200
38400
57600 (does not support ES/SS V5.8 and below)
115200 (does not support ES/SS V5.8 and below)
None
D1124

b9

First end word

None

D1125

b10

Second end word

None

D1126

b15 ~ b11
4.

0
7

Not defined

When RS instruction is in use, the frequently used communication format in the peripheral device will define the
start word and end word of the control string. Therefore, you can set up the start word and end word in D1124 ~
D1126 or use the start word and end word defined by the PLC. When you use M1126, M1130 and D1124 ~
D1126 to set up the start word and end word, b8 ~ b10 of D1120 have to be set as 1 to make valid the RS-485
communication protocol. See the table below for how to set up.
M1130
0
0

D1124: user defined
D1125: user defined
D1126: user defined

D1124: H 0002
D1125: H 0003
D1126: H 0000 (no setting)

1

D1124: user defined
D1125: user defined
D1126: user defined

D1124: H 003A (’:’)
D1125: H 000D (CR)
D1126: H 000A (LF)

M1126
5.

1

Example of how to set up the communication format:
Assume there is a communication format: Baud rate 9600 7, N, 2
STX

: “:”

ETX1 : “CR”
ETX2 : “LF”
Check the table and obtain the communication format H788 and write it into D1120.
b15

b0

D1120 0 0 0 0 0 1 1 1 1 0 0 0 1 0 0 0
0
Don t care

7

D V P - P L C A P P L I C AT I O N M A N U A L

8

8

7-101

7 Application Instructions API 50-99
When STX, ETX1 and EXT2 are in use, please be aware of the On and Off of the special auxiliary relays M1126
and M1130.
6.

M1143 is for the selection of ASCII mode or RTU mode. On = RTU mode; Off = ASCII mode.
Take the standard Modbus format for example:
In ASCII mode (M1143 = Off)
STX
Address Hi
Address Lo
Function Hi
Function Lo

Start word = ‘:’ (3AH)
Communication address:
The 8-bit address consists of 2 ASCII codes
Function code:
The 8-bit function code consists of 2 ASCII codes

DATA (n-1)
Data:
The n × 8-bit data consists of 2n ASCll codes

…….
DATA 0

LRC checksum:
The 8-bit checksum consists of 2 ASCll code
End word:
END Hi = CR (0DH), END Lo = LF(0AH)

LRC CHK Hi
LRC CHK Lo
END Hi
END Lo

The communication protocol is in Modbus ASCII mode, i.e. every byte is composed of 2 ASCII characters. For
example, 64Hex is ‘64’ in ASCII, composed by ‘6’ (36Hex) and ‘4’ (34Hex). Every hex ‘0’…’9’, ‘A’…’F’
corresponds to an ASCII code.
Character

‘0’

‘1’

‘2’

‘3’

‘4’

‘5’

‘6’

‘7’

ASCII code

30H

31H

32H

33H

34H

35H

36H

37H

Character

‘8’

‘9’

‘A’

‘B’

‘C’

‘D’

‘E’

‘F’

ASCII code

38H

39H

41H

42H

43H

44H

45H

46H

Start word (STX):
Fixed as ‘:’ (3AH)
Address:
‘0’ ‘0’: Broadcasting to all drivers
‘0’ ‘1’: To the driver at address 01
‘0’ ‘F’: To the driver at address 15
‘1’ ‘0’: To the driver at address 16
….and so on, maximum to the driver at address 255 (‘F’ ‘F’)
Function code:
‘0’ ‘3’: Read contents of many registers
‘0’ ‘6’: Write 1 word to register
‘1’ ‘0’: Write in contents of many registers
Data characters: The data sent by the user.
LRC checksum:
LCR checksum is 2’s complement of the value added from Address to Data Content.
For example: 01H + 03H + 21H + 02H + 00H + 02H = 29H. 2’s complement of 29H = D7H
End word (END):
7-102

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Fixed as END Hi = CR (0DH), END Lo = LF (0AH)
For example: Read 2 continuous data stored in the registers of the driver at address 01H (see the table below).
The start register is at address 2102H.
Inquiry message:
Responding message:
STX
‘: ’
STX
‘0’
Address
Address
‘1’
‘0’
Function code
Function code
‘3’
Number of data
‘2’
(counted by byte)
‘1’
Start address
‘0’
‘2’
Content in start address
2102H
‘0’
Number of data
‘0’
(counted by words)
‘0’
‘2’
Content of address
2103H
‘D’
LRC checksum
‘7’
CR
END
LRC check
LF
END

‘: ’
‘0’
‘1’
‘0’
‘3’
‘0’
‘4’
‘1’
‘7’
‘7’
‘0’
‘0’
‘0’
‘0’
‘0’
‘7’
‘1’
CR
LF

In RTU mode (M1143 = On)
START

See the following explanation

Address

Communication address: In 8-bit binary

Function
DATA (n-1)
…….
DATA 0
CRC CHK Low
CRC CHK High
END

Function code: In 8-bit binary
Data:
n × 8-bit data
CRC checksum:
16-bit CRC consists of 2 8-bit binary
See the following explanation

START:
For ES/EX/SS/SA/SX series MPU, no input signal can be ≥ 10ms.
See the table below for EH/EH2/SV/EH3/SV2 series MPU:
Baud rate(bps)
300

RTU timeout timer (ms) Baud rate (bps) RTU timeout timer (ms)
40
9,600
2

600

21

19,200

1

1,200

10

38,400

1

2,400

5

57,600

1

4,800

3

115,200

1

Address:
00H: Broadcasting to all drivers
01H: To the driver at address 01
0FH: To the driver at address 15
10H: To the driver at address 16…. And so on, maximum to the driver at address 254 (FE H)
Function code:
03H: Read contents of many registers
D V P - P L C A P P L I C AT I O N M A N U A L

7-103

7 Application Instructions API 50-99
06H: Write 1 word to register
10H: Write in contents of many registers
Data characters: The data sent by the user.
CRC checksum: Starting from Address and ending at Data Content.
Step 1: Make the 16-bit register (CRC register) = FFFFH
Step 2: Exclusive OR the first 8-bit message and the low 16-bit CRC register. Store the result in the CRC
register.
Step 3: Right shift CRC register for a bit and fill “0” into the high bit.
Step 4: Check the value shifted to the right. If it is 0, fill in the new value obtained in step 3 and store the value
in CRC register; otherwise, Exclusive OR A001H and CRC register and store the result in the CRC
register.
Step 5: Repeat step 3 – 4 and finish operations of all the 8 bits.
Step 6: Repeat step 2 – 5 for obtaining the next 8-bit message until the operation of all the messages are
completed. The final value obtained in the CRC register is the CRC checksum. The CRC checksum
has to be placed interchangeably in the checksum of the message.
END:
For ES/EX/SS V5.8 (and below) and SA/SX V1.1 (and below) series MPU, keep no input signal be ≥ 10ms.
See the table below for EH/EH2/SV series MPU:
Baud rate(bps)
300

RTU timeout timer (ms) Baud rate (bps) RTU timeout timer (ms)
40
9,600
2

600

21

19,200

1

1,200

10

38,400

1

2,400

5

57,600

1

4,800

3

115,200

1

For example: Read 2 continuous data stored in the registers of the driver at address 01H (see the table below).
The start register is at address 2102H.
Inquiry message:
Address

01 H

Address

01 H

Function

03 H
21 H
02 H
00 H
02 H
6F H
F7 H

Function
Number of data
(counted by byte)
Content in data address
8102H
Content in data address
8103H
CRC CHK Low
CRC CHK High

03 H

Start data address
Number of data
(counted by words)
CRC CHK Low
CRC CHK High

7-104

Responding message:

04 H
17 H
70 H
00 H
00 H
FE H
5C H

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
7.

Timing diagram of RS-485 communication flag:
M1002

Sending request
pulses

MOV

H86

SET

M1120

MOV

K100

D1120

Set up communication protocol 9600,7,E,1

Retain communication protocol
D1129

Setting communication time out 100ms

Write the data to be transmitted in advance
SET

M1122

RS

D100

Set up sending request

X10
K3

D120

K8

Receiving
completed

Process of received data
M1123
RST

M1123

Receiving of data is completed.
The flag is reset.

SET M1122 X0
Execution of RS instruction X10
Transmission ready M1121
Auto reset after the data transmission is completed

Sending request M1122

The user has to do the reset in the program.

Receiving completed M1123
Waiting for receiving M1124

Using this in the program will return the
status to the initial transmission ready status.

Communication status cleared M1125
MODRD/RDST/MODRW data
M1127
receiving and conversion
completed
Transmitting and receiving M1128

Changing direction
immediately
1 2 3 1 2 3 4 5 6 7 8

On when receiving message from the time-out counter

Receiving time-out M1129

Stop counting when receiving all the data

Receiving time-out timer, set by D1129
MODRD/RDST/MODRW
data converted to hex

ASCII data being converted to hex
takes less than 1 scan period.

Converting data

M1131
3
2

Remaining words of the sent data D1122

1
0
8
7
6
5
4

Remaining words of the received data D1123

3
2
1
0

D V P - P L C A P P L I C AT I O N M A N U A L

7-105

7 Application Instructions API 50-99
API

Mnemonic

81

D

PRUN

Type

Function
Parallel Run

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K

S
D

H KnX KnY KnM KnS T
*
*
*
*

Program Steps
C

D

E

F PRUN, PRUNP: 5 steps
DPRUN, DPRUNP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device

D: Destination device

Explanations:
1.

The most right digit of X, Y and M of KnX, KnY and KnM has to be 0.

2.

When S designates KnX, D has to designate KnM; when S designates KnM, D has to designate KnY.

3.

See the specifications of each model for their range of use.

4.

This instruction sends the content in S to D in the form of octal system.

Program Example 1:
When X3 = On, the content in K4X10 will be sent to K4M10 in octal form.
X3
PRUN

K4X10

K4M10

X27 X26 X25 X24 X23 X22 X21 X20 X17 X16 X15 X14 X13 X12 X11 X10

M27 M26 M25 M24 M23 M22 M21 M20 M19 M18 M17 M16 M15 M14 M13 M12 M11 M10
No change

Program Example 2:
When X2 = On, the content in K4M10 will be sent to K4Y10 in octal form.
X2
PRUN

K4M10

K4Y10

Will not be transmitted
M27 M26 M25 M24 M23 M22 M21 M20 M19 M18 M17 M16 M15 M14 M13 M12 M11 M10

Y27 Y26 Y25 Y24 Y23 Y22 Y21 Y20 Y17 Y16 Y15 Y14 Y13 Y12 Y11 Y10

7-106

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

82

ASCI
Type

Function
Converts Hex to ASCII

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
D
n

K
*
*

Program Steps

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*

C
*
*

D
*
*

E

F ASCI, ASCIP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for source data

D: Start device for storing the converted result

n: Number of bits to be converted

Explanations:
1.

Range of n: 1 ~ 256

2.

See the specifications of each model for their range of use.

3.

Flag: M1161 (8/16 bit mode switch)

4.

16-bit conversion mode: When M1161 = Off, the instruction converts every bit of the hex data in S into ASCII
codes and send them to the 8 high bits and 8 low bits of D. n = the converted number of bits.

5.

8-bit conversion mode: When M1161 = On, the instruction converts every bit of the hex data in S into ASCII
codes and send them to the 8 low bits of D. n = the number of converted bits. (All 8 high bits of D = 0)

Program Example 1:
1.

M1161 = Off: The 16-bit conversion mode

2.

When X0 = On, convert the 4 hex values in D10 into ASCII codes and send the result to registers starting from
D20.
M1001
M1161
X0
ASCI

3.

4.

D10

D20

K4

Assume
(D10) = 0123 H

‘0’ = 30H

‘4’ = 34H

‘8’ = 38H

(D11) = 4567 H

‘1’ = 31H

‘5’ = 35H

‘9’ = 39H

(D12) = 89AB H

‘2’ = 32H

‘6’ = 36H

‘A’ = 41H

(D13) = CDEF H

‘3’ = 33H

‘7’ = 37H

‘B’ = 42H

When n = 4, the bit structure will be as:

D V P - P L C A P P L I C AT I O N M A N U A L

7-107

7 Application Instructions API 50-99
D10=0123 H
0

0

0

0

0

0

0
0

1

D21
0

1

0

0

1

1

1

0

0

1

1

0

0

1

0

1

b0
1

1

b0
1

1

b0
0

0

b0
0

1

b0
0

3
Low byte

0

0

0

2
0

1

0

0

1

31H
High byte
0

0
1

1

0

0

1

0

0

30H
Low byte

1

33H

3

5.

0

1

1
0

1

High byte

D20
0

0

1

0

0

32H

2

When n = 6, the bit structure will be as:
D10 = H 0123
0 0 0 0 0 1

b15
0 0
0

0

0

1

1

0

0

0

2

3

D11 = H 4567

b15
0 1

0

0

0

1

4

0

1 0

1

5

1 0

0

1

6

7

Converted to
b15
0 0

1

1

7
b15
0 0

1

1

0

0

1

D21
0 0

1

1

6
0 1

0

0

H 31

1

0

1

H 36
1

0

0

0

H 30

D22
1
3

6.

1

H 37

1
b15
0 0

D20
0 1

1

0

0

1

1 0

H 33

0

1 1
2

0

0

H 32

When n = 1 ~ 16:
n
D
D20 Low byte
D20 High byte
D21 Low byte
D21 High byte
D22 Low byte
D22 High byte
D23 Llow byte
D23 High byte
D24 Low byte
D24 High byte
D25 Low byte
D25 High byte
D26 Low byte
D26 High byte
D27 Low byte
D27 High byte
n
D
D20 Low byte
D20 High byte
D21 Low byte
D21 High byte
D22 Low byte
D22 High byte
D23 Llow byte
D23 High byte

7-108

K1

K2

K3

K4

K5

K6

K7

K8

“3”

“2”
“3”

“1”
“2”
“3”

“0”
“1”
“2”
“3”

“7”
“0”
“1”
“2”
“3”

“6”
“7”
“0”
“1”
“2”
“3”

“5”
“6”
“7”
“0”
“1”
“2”
“3”

“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

no
change

K9

K10

K11

K12

K13

K14

K15

K16

“B”
“4”
“5”
“6”
“7”
“0”
“1”
“2”

“A”
“B”
“4”
“5”
“6”
“7”
“0”
“1”

“9”
“A”
“B”
“4”
“5”
“6”
“7”
“0”

“8”
“9”
“A”
“B”
“4”
“5”
“6”
“7”

“F”
“8”
“9”
“A”
“B”
“4”
“5”
“6”

“E”
“F”
“8”
“9”
“A”
“B”
“4”
“5”

“D”
“E”
“F”
“8”
“9”
“A”
“B”
“4”

“C”
“D”
“E”
“F”
“8”
“9”
“A”
“B”

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
D24 Low byte
D24 High byte
D25 Low byte
D25 High byte
D26 Low byte
D26 High byte
D27 Low byte
D27 High byte

“3”

“2”
“3”

“1”
“2”
“3”

“0”
“1”
“2”
“3”

no
change

“7”
“0”
“1”
“2”
“3”

“6”
“7”
“0”
“1”
“2”
“3”

“5”
“6”
“7”
“0”
“1”
“2”
“3”

“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

Program Example 2:
1.

M1161 = On: The 8-bit conversion mode

2.

When X0 = On, convert the 4 hex values in D10 into ASCII codes and send the result to registers starting from
D20.
M1000
M1161
X0
ASCI

3.

4.

D10

D20

K4

Assume
(D10) = 0123 H

‘0’ = 30H

‘4’ = 34H

‘8’ = 38H

(D11) = 4567 H

‘1’ = 31H

‘5’ = 35H

‘9’ = 39H

(D12) = 89AB H

‘2’ = 32H

‘6’ = 36H

‘A’ = 41H

(D13) = CDEFH

‘3’ = 33H

‘7’ = 37H

‘B’ = 42H

When n = 2, the bit structure will be as:
D10=0123 H
0

0

0

0

0

0

0

0

1

0

0

1

0

0

0

2

1

1

1

1

0

1

1

3

ASCII code of D20=2 is 32H
0

0

0

0

0

0

0

0

0

0

1

1

0

0

3

2

ASCII code of D21=3 is 33H
0

0

0

0

0

0

0

0

0

0

1

1

0

0

3

5.

3

When n = 4, the bit structure will be as:

D V P - P L C A P P L I C AT I O N M A N U A L

7-109

7 Application Instructions API 50-99
D10 = H 0123
0 0 0 0 0 1

b15
0 0
0

0

0

1

1

0

0

0

2

1

b0
1

3

Converted to
b15
0 0
b15
0 0

0

D20
0 0

0

0

0 0

0

1 1
0

0 0
H 30

0

b0
0

0

D21
0 0

0

0

0 0

0

1 1

0

0

b0
1

1

b0
0

1

b0
1

1
b15
0 0

b15
0 0

0

D22
0 0

0

0

0 0

0

H 31

1 1

0

2

H 32

0

D23
0

0

0

0

0

0 0

0

1 1
3

7 - 11 0

0

0

0

H 33

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
6.

When n = 1 ~ 16:
n
D
D20
D21
D22
D23
D24
D25
D26
D27
D28
D29
D30
D31
D32
D33
D34
D35
n
D
D20
D21
D22
D23
D24
D25
D26
D27
D28
D29
D30
D31
D32
D33
D34
D35

K1

K2

K3

K4

K5

K6

K7

K8

“3”

“2”
“3”

“1”
“2”
“3”

“0”
“1”
“2”
“3”

“7”
“0”
“1”
“2”
“3”

“6”
“7”
“0”
“1”
“2”
“3”

“5”
“6”
“7”
“0”
“1”
“2”
“3”

“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

no
change

K9

K10

K11

K12

K13

K14

K15

K16

“B”
“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

“A”
“B”
“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

“9”
“A”
“B”
“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

“8”
“9”
“A”
“B”
“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

“F”
“8”
“9”
“A”
“B”
“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

“E”
“F”
“8”
“9”
“A”
“B”
“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

“D”
“E”
“F”
“8”
“9”
“A”
“B”
“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

“C”
“D”
“E”
“F”
“8”
“9”
“A”
“B”
“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

no
change

D V P - P L C A P P L I C AT I O N M A N U A L

7 - 111

7 Application Instructions API 50-99
API

Mnemonic

83

HEX
Type

Operands

Function
Converts ASCII to Hex

P

Bit Devices
X

OP

Y

M

Word Devices
S

S
D
n

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E

F HEX, HEXP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for source data

D: Start device for storing the converted result

n: Number of bits to be converted

Explanations:
1. Range of n: 1 ~ 256
2. See the specifications of each model for their range of use.
3. Flag: M1161 (8/16 bit mode switch)
4. 16-bit conversion mode: When M1161 = Off, the instruction is in 16-bit conversion mode. ASCII codes of the 8
high bits and 8 low bits of the hex data in S are converted into hex value and sent to D (every 4 bits as a group). n
= the number of bits converted into ASCII codes.
5. 8-bit conversion mode: When M1161 = On, the instruction is in 8-bit conversion mode. Every bit of the hex data in
S are converted into ASCII codes and sent to the 8 low bits of D. n = the number of converted bits. (All 8 high bits
of D = 0)
Program Example 1:
1.

M1161 = Off: The 16-bit conversion mode

2.

When X0 = On, convert the ASCII codes stored in the registers starting from D20 into hex value and send the
result (every 4 bits as a group) to registers starting from D10. n = 4.
M1001
M1161
X0
HEX

3.

D10

K4

Assume
S
D20 low byte
D20 high byte
D21 low byte
D21 high byte
D22 low byte
D22 high byte
D23 low byte
D23 high byte

4.

D20

ASCII code

Converted to hex

H 43
H 44
H 45
H 46
H 38
H 39
H 41
H 42

“C”
“D”
“E”
“F”
“8”
“9”
“A”
“B”

S
D24 low byte
D24 high byte
D25 low byte
D25 high byte
D26 low byte
D26 high byte
D27 low byte
D27 high byte

ASCII code

Converted to hex

H 34
H 35
H 36
H 37
H 30
H 31
H 32
H 33

“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

When n = 4, the bit structure will be as:

7 - 11 2

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
D20

0

1

0

0

0

1

44H
D21

0

1

0

1

1

0

0

0

0

1

0

1

1

0

0

0

0

43H
1

0

1

0

0

1

0

1

1

1

D

1

1

1

C
0

0

1

45H

F

C

5.

0

D

46H
D10

0

0

1

1

1

E
0

1

1

E

F

When n = 1 ~ 16:
D

D13

n
1
2
3
4
5
6
7
8
9

D12

The
undesignated
parts in the
registers in use
are all 0.

10
11
12
13
14
15
16

***C H
**CD H
*CDE H
CDEF H

D11

D10

***C H

***C H
**CD H
*CDE H
CDEF H
DEF8 H

***C H
**CD H
*CDE H
CDEF H
DEF8 H
EF89 H
F89A H
89AB H
9AB4 H

**CD H
*CDE H
CDEF H
DEF8 H
EF89 H
F89A H
89AB H

EF89 H
F89A H
89AB H
9AB4 H
AB45 H
B456 H
4567 H

AB45 H
B456 H
4567 H
5670 H
6701 H
7012 H
0123 H

Program Example 2:
1.

M1161 = On: The 8-bit converstion mode
M1000
M1161
X0
HEX

2.

D20

D10

K4

Assume
S
D20
D21
D22
D23
D24
D25
D26
D27

ASCII code

Converted to hex

H 43
H 44
H 45
H 46
H 38
H 39
H 41
H 42

“C”
“D”
“E”
“F”
“8”
“9”
“A”
“B”

D V P - P L C A P P L I C AT I O N M A N U A L

S
D28
D29
D30
D31
D32
D33
D34
D35

ASCII code

Converted to hex

H 34
H 35
H 36
H 37
H 30
H 31
H 32
H 33

“4”
“5”
“6”
“7”
“0”
“1”
“2”
“3”

7 - 11 3

7 Application Instructions API 50-99
3.

When n = 2, the bit structure will be as:
D20

0

1

0

0

0

0

43H
D21

0

1

0

0

0

1

44H
D10

0

0

0

0

0

0

0

0

1

1

0

1

0

0

0

1

D
0

1

C

4.

1

C

1

D

When n = 1 ~ 16:
D
n
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16

7 - 11 4

D13

The used
registers
which are not
specified are
all 0

***C H
**CD H
*CDE H
CDEF H

D12

D11

D10

***C H

***C H
**CD H
*CDE H
CDEF H
DEF8 H

***C H
**CD H
*CDE H
CDEF H
DEF8 H
EF89 H
F89A H
89AB H
9AB4 H

**CD H
*CDE H
CDEF H
DEF8 H
EF89 H
F89A H
89AB H

EF89 H
F89A H
89AB H
9AB4 H
AB45 H
B456 H
4567 H

AB45 H
B456 H
4567 H
5670 H
6701 H
7012 H
0123 H

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

84

CCD
Type

Function
Check Code

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
D
n

K

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*

*

Program Steps
C
*
*

D
*
*
*

E

F CCD, CCDP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for source data

D: Device for storing the sum check result

n: Number of data

Explanations:
1.

Range of n: 1 ~ 256

2.

See the specifications of each model for their range of use.

3.

Flag: M1161 (8/16 bit mode switch)

4.

The sum check is used for ensuring the correctness of the data transmission.

5.

16-bit conversion mode: When M1161 = Off, the instruction is in 16-bit conversion mode. The instruction sums
up n data (8 bits as a unit) from the start register designated in S and stores the results in the registers
designated in D. The parity bits are stored in D + 1.

6.

8-bit conversion mode: When M1161 = On, the instruction is in 8-bit conversion mode. The instruction sums up n
data (8 bits as a unit; only 8 low bits are valid) from the start register designated in S and stores the results in the
registers designated in D. The parity bits are stored in D + 1.

Program Example 1:
1.

M1161 = Off: The 16-bit conversion mode

2.

When X0 = On, the instruction will sum up 6 data stored in the register designated in D0 (8 bits as a unit; n = 6
indicates D0 ~ D2 are designated) and store the result in the register designated in D100. The parity bits are
stored in D101.
M1000
M1161
X0
CCD

D0

D100

D V P - P L C A P P L I C AT I O N M A N U A L

K6

7 - 11 5

7 Application Instructions API 50-99
(S)

Content of data

D0 low byte

K100 = 0 1 1 0 0 1 0 0

D0 high byte K111 = 0 1 1 0 1 1 1 1
K120 = 0 1 1 1 1 0 0 0

D1 low byte

D1 high byte K202 = 1 1 0 0 1 0 1 0
D2 low byte

K123 = 0 1 1 1 1 0 1 1

D2 high byte K211 = 1 1 0 1 0 0 1 1
K867

D100

Total

D101

00010001

The parity is 1 when there is a odd number of 1.
The parity is 0 when there is a even number of 1.

D100 0

0

0

0

0

0

1 1

0

1

1

0

0

0

1

1

D101 0

0

0

0

0

0

0

0

0

0

1

0

0

0

1

0

Parity

Program Example 2:
1.

M1161 = On: The 8-bit conversion mode

2.

When X0 = On, the instruction will sum up 6 data stored in the register designated in D0 (8 bits as a unit; n = 6
indicates D0 ~ D5 are designated) and store the result in the register designated in D100. The parity bits are
stored in D101.
M1000
M1161
X0
CCD

D0

D100

(S)

Content of data

D0 low byte

K100 = 0 1 1 0 0 1 0 0

D1 low byte

K111 = 0 1 1 0 1 1 1 1

D2 low byte

K120 = 0 1 1 1 1 0 0 0

D3 low byte

K202 = 1 1 0 0 1 0 1 0

D4 low byte

K123 = 0 1 1 1 1 0 1 1

D5 low byte

K211 = 1 1 0 1 0 0 1 1

D100

K867

D101

K6

Total
00 01 00 01

The parity is 1 when there is a odd number of 1.
The parity is 0 when there is a even number of 1.

D 10 0 0

0

0

0

0

0

1

1

0

1

1

0

0

0

1

1

D 10 1 0

0

0

0

0

0

0

0

0

0

0

1

0

0

0

1

7 - 11 6

Parity

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

85

VRRD
Type

Function
Volume Read

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
D

K
*

H KnX KnY KnM KnS T
*
*
*
*
*

PULSE

Program Steps
C

D

E

F VRRD, VRRDP: 5 steps

*

*

*

*

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: No. of VR

D: Device for storing the volume of VR

Explanations:
1.

Range of S: 0 ~ 7; without function card: 0 ~ 1.

2.

See the specifications of each model for their range of use.

3.

Flags: M1178, M1179. See remarks for more details.

4.

VRRD instruction is used for reading 2 points (No.0, No.1) of PLC or the VR rotary switch volume change in the 6
points of the function cards (No.2 ~ No.7) and converting the data into values 0 ~ 255 (stored in D).

5.

If you are to set up the timer by the VR volume, simply rotate the VR to modify the set time in the timer. If you are
to acquire a value larger than 255, multiply D by a constant.

Program Example 1:
1.

When X0 = On, VR0 volume changed will be converted into an 8-bit BIN value (0 ~ 255) and stored in D0.

2.

When X1 = On, the imer T0 will start to time with the content in D0 as the set value in the timer.
X0
VRRD

K0

D0

TMR

T0

D0

X1

Program Example 2:
1.

Read the VR volume in order: The VR0 ~ VR7 rotary switches on the PLC correspond to S = K0 ~ K7 of VRRD
instruction. E index register modification is used in the example below, K0E = K0 ~ K7.

2.

The timer converts the scale 0 ~ 10 on the rotary switch into 0 ~ 255. The timing unit of T0 ~ T7 is 0.1 second;
therefore, the set time in the timer will be 0 ~ 25.5 seconds.

D V P - P L C A P P L I C AT I O N M A N U A L

7 - 11 7

7 Application Instructions API 50-99
M1000
RST

E

F OR

K8

VRRD

K 0E

INC

E

M1000
D100E

NEXT

X10
TMR

T0

D100

T7

D107

T0
Y000
X17
TMR
T7
Y007
END

3.

Operation of FOR ~ NEXT instruction:
a) In the area between FOR ~ NEXT instruction, FOR designating K8 indicates the loop between FOR ~ NEXT
will be executed repeatedly for 8 times before the next instruction is executed.
b) Between FOR ~ NEXT (INC E), E will be 0, 1, 2, …7 plusing 1. Therefore, the 8 VR rotary switch volumes
will be VR0→D100, VR1→D101, VR2→D102…VR7→D107 and be read to designated registers in order.

Remarks:
1.

VR refers to Variable Resister.

2.

The 2 points of VR rotary switch built in SA/SX/SC/EH/EH2/SV/EH3/SV2 series MPU can be used together with
special D and special M.
Device

3.

Function

M1178

Enabling VR0

M1179

Enabling VR1

D1178

VR0 value

D1179

VR1 value

If there is no VR extension card inserted in the PLC, setting up the No. of rotary switches as K2 ~ K7 in VRRD
and VRSC instruction in the program will result in errors in grammar check.

7 - 11 8

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

86

VRSC
Type

Function
Volume Scale

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
D

K
*

H KnX KnY KnM KnS T
*
*
*
*
*

PULSE

Program Steps
C

D

E

F VRSC, VRSCP: 5 steps

*

*

*

*

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: No. of VR

D: Device for storing the scale of VR

Explanations:
1.

Range of S: 0 ~ 7; without function card: 0 ~ 1

2.

See the specifications of each model for their range of use.

3.

VRSC instruction is used for reading 2 points (No.0, No.1) of PLC or the VR rotary switch scale (0 ~ 10) in the 6
points of the function cards (No.2 ~ No.7) and storing the data in D. If the position of the VR falls in the middle of
two scales, VRSC will round up the value into an integer of 0 ~ 10.

Program Example 1:
When X0 = On, the scale of VR0 (0 ~ 10) will be stored in D10.
X0
VRSC

K0

D10

Program Example 2:
1.

When the VR is used as DIP switch, they will correspond to scale 0 ~ 10 and only one of M10 ~ M20 will be On.
Use API 41 DECO instruction to decode the scales into M10 ~ M25.

2.

When X0 = On, store the scale (0 ~ 10) of VR1 into D1.

3.

When X1 = On, use API 41 DECO to decode the scales into M10 ~ M25.
X0
VRSC

K1

D1

DECO

D1

M10

X1
K4

M10
On when the scale is 0
M11
On when the scale is 1
M20

On when the scale is 10

Remarks:
If the MPU is not inserted with a VR extension card, and the No. of the rotary switches inVRRD or VRSC instruction in
the program are set as K2 ~ K7, errors will occur in the execution of grammar check.

D V P - P L C A P P L I C AT I O N M A N U A L

7 - 11 9

7 Application Instructions API 50-99
API

Mnemonic

87

D

ABS

Type

Function
Absolute Value

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

D

*
PULSE
ES EX SS SA SX SC EH SV

*

*

*

Program Steps
C

D

E

F ABS, ABSP: 3 steps

*

*

*

* DABS, DABSP: 5 steps

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device of the absolute value
Explanations:
1.

See the specifications of each model for their range of use.

2.

This instruction obtains the absolute value of the content in the designated in D.

3.

This instruction adopts pulse execution instructions (ABSP, DABSP).

Program Example:
When X0 = Off→On, obtain the absolute value of the content in D0.
X0
ABS

7-120

D0

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
API

Mnemonic

88

D

Operands

Function
PID Control Loop

PID

Type

Bit Devices
X

OP

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

S1
S2
S3
D

D
*
*
*
*

E

F PID : 9 steps
DPID: 17 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Set value (SV)

S2: Present value (PV)

S3: Parameter

D: Output value (MV)

Explanations:
1.

In 16-bit instruction, S3 will occupy 20 consecutive devices; in 32-bit instruction, S3 will occupy 21 consecutive
devices.

2.

See the specifications of each model for their range of use.

3.

See the Remarks below for the times of using PID instruction allowed in the program.

4.

This instruction is specifically for PID control. PID operation will be executed by the scan only when the sampling
time is reached. PID refers to “proportion, integration and differential”. PID control is widely applied to many
machines, pneumatic and electronic equipments.

5.

For the 16-bit instruction, the parameters are S3 ~ S3+19; for the 32-bit instruction, the parameters are S3 ~ S3+20.
After all the parameters are set up, PID instruction will start to be executed and the results will be stored in D. D
has to be the data register area without latched function. (If you wish to designate a latched data register area,
place the data register in the latched area at the beginning of the program and clear it as 0.)

Program Example:
1.

Complete the parameter setting before executing PID instruction.

2.

When X0 = On, the instruction will be executed and the result will be stored in D150. When X0 goes Off, the
instruction will not be executed and the data prior to the instruction will stay intact.
X0
PID

D0

D1

D100

D150

Remarks:
1.

ES/EX/SS series MPU V5.7 (and above) supports PID instruction. Other versions do not support the instruction.

2.

There is no limitation on the times of using this instruction. However, the register No. designated in S3 cannot be
repeated.

3.

For the 16-bit instruction, S3 will occupy 20 registers. In the program example above, the area designated in S3 is
D100 ~ D119. Before the execution of PID instruction, you have to transmit the setting value to the designated
register area by MOV instruction, If the designated registers are latched, use MOVP instruction to transmit all
setting value at a time.

D V P - P L C A P P L I C AT I O N M A N U A L

7-121

7 Application Instructions API 50-99
4.

Settings of S3 in the 16-bit instruction
Device No.

Setup Range

Explanation
If TS is less than 1 program scan time, PID
instruction will be executed for 1 program scan
time. If TS= 0, PID instruction will not be enabled.
The minimum TS has to be longer than the
program scan time.

S3:

Sampling time (TS)
(unit: 10ms)

S3 +1:

Proportional gain (KP) 0 ~ 30,000 (%)

The magnified error proportional value between
SV – PV.

S3 +2:

Integral gain (KI)

0 ~ 30,000 (%)

The magnified proportional value of every
sampling time unit × the accumulated value of
the error.

S3 +3:

Differential gain (KD)

-30,000 ~ 30,000 (%)

The magnified proportional value of the varied
error in every samping timme unit.

S3 +4:

Control direction
(DIR)

0: automatic control
1: forward control (E = SV - PV)
2: inverse control (E = PV - SV)
3: Auto-tuning of parameter exclusively for the temperature control. The
device will automatically become K4 when the auto-tuning is
completed and be filled in with the appropriate parameter KP, KI and
KD (not avaliable in the 32-bit instruction).
4: Exclusively for the adjusted temperature control (not avaliable in the
32-bit instruction).
5: Auto direction control (limited integrall upper/lower limit)
P.S. K5 mode is only available in SV/EH2/EH3/SV2 V1.2, SA/SX V1.8
and SC V1.6.

S3 +5:

The range that error
value (E) doesn’t
work

0 ~ 32,767

S3 +6:

Upper bound of output
-32,768 ~ 32,767
value (MV)

Ex: if S3 +6 is set as 1,000, the output will be
1,000 when MV is bigger than 1,000. S3 +6 has
to be bigger or equal S3 +7; otherwise the upper
bound and lower bound will switch.

S3 +7:

Lower bound of output
-32,768 ~ 32,767
value (MV)

Ex: if S3 +7 is set as -1,000, the output will be
-1,000 when MV is smaller than -1,000.

S3 +8:

Upper bound of
integral value

-32,768~32,767

Ex: if S3 +8 is set as 1,000, the output will be
1,000 when the integral value is bigger than
1,000 and the integration will stop. S3 +8 has to
be bigger or equal S3 +9; otherwier the upper
bound and lower bound will switch.

S3 +9:

Lower bound of
integral value

-32,768 ~ 32,767

Ex: if S3 +9 is set as -1,000, the output will be
-1,000 when the integral value is smaller than
-1,000 and the integration will stop.

S3 +10,11:

Accumulated integral
value

32-bit floating point

The accumulated integral value is only for
reference. You can still clear or modify it (in
32-bit floating point) according to your need.

S3 +12:

The previous PV

-

The previous PV is only for reference. You can
still modify it according to your need.

~

S3 +13:
S3 +19:
5.

Function

1 ~ 2,000
(unit: 10ms)

E = the error of SV – PV. When S3 +5 = K0, the
function will not be enabled, e.g. when S3 +5 is
set as 5, MV of E between -5 and 5 will be 0.

For system use only.

When parameter setting exceeds its range, the upper bound and lower bound will become the setting value.
However, if the motion direction (DIR) exceeds the range, it will be set to 0.

6.

PID instruction can be used in interruption subroutines, step points and CJ instruction.

7-122

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
7.

The maximum error of sampling time TS = - (1 scan time + 1ms) ~ + (1 scan time). When the error affects the
output, please fix the scan time or execute PID instruction in the interruption subroutine of the timer.

8.

PV of PID instruction has to be stable before the execution of PID instruction. If you are to extract the input value
of DVP04AD/04DA/06XA/04PT/04TC for PID operation, please be aware of the A/D conversion time of these
modules.

9.

For the 32-bit instruction, If S3 designates the parameter setting area of PID instruction as D100 ~ D120, S3
occupies 21 registers. Before the execution of PID instruction, you have to use MOV instrction first to send the
setting value to the register area for setup. If the designated registers are latched one, use MOVP instruction to
send all the setting value at a time.

10. Settings of S3 in the 32-bit instruction
Device No.

Function

Setup range

Explanation

S3:

Sampling time (TS)
(unit: 10ms)

1 ~ 2,000
(unit: 10ms)

If TS is less than 1 program scan time, PID
instruction will be executed for 1 program
scan time. If TS= 0, PID instruction will not be
enabled. The minimum TS has to be longer
than the program scan time.

S3 +1:

Proportional gain (KP)

0 ~ 30,000 (%)

The magnified error proportional value
between SV – PV.

S3 +2:

Integral gain (KI)

0 ~ 30,000 (%)

The magnified proportional value of every
sampling time unit × the accumulated value
of the error.

S3 +3:

Differential gain (KD)

-30,000 ~ 30,000 (%)

The magnified proportional value of the
varied error in every samping timme unit.

S3 +4:

Control direction (DIR)

0: automatic control
1: forward control (E = SV – PV)
2: inverse control (E = PV – SV)

S3 +5, 6:

The range that 32-bit
error value (E) doesn’t 0 ~ 2,147,483,647
work

E = the error of SV – PV. When S3 +5,6 = K0,
the function will not be enabled, e.g. when S3
+5,6 is set as 5, MV of E between -5 and 5
will be 0.

S3 +7, 8:

Upper bound of 32-bit
output value (MV)

-2,147,483,648 ~
2,147,483,647

Ex: if S3 +7,8 is set as 1,000, the output will
be 1,000 when MV is bigger than 1,000. S3
+7,8 has to be bigger or equal S3 +9,10;
otherwise the upper bound and lower bound
will switch.

S3 +9, 10:

Lower bound of 32-bit
output value (MV)

-2,147,483,648 ~
2,147,483,647

Ex: if S3 +9,10 is set as -1,000, the output will
be -1,000 when MV is smaller than -1,000.

S3 +11, 12:

Upper bound of 32-bit
integral value

-2,147,483,648 ~
2,147,483,647

Ex: if S3 +11,12 is set as 1,000, the output
will be 1,000 when the integral value is
bigger than 1,000 and the integration will
stop. S3 +11,12 has to be bigger or equal S3
+13,14; otherwier the upper bound and lower
bound will switch.

S3 +13, 14:

Lower bound of 32-bit
integral value

-2,147,483,648 ~
2,147,483,647

Ex: if S3 +13,14 is set as -1,000, the output
will be -1,000 when the integral value is
smaller than -1,000 and the integration will
stop.

S3 +15, 16:

32-bit accumulated
integral value

32-bit floating point

The accumulated integral value is only for
reference. You can still clear or modify it (in
32-bit floating point) according to your need.

S3 +17, 18:

32-bit previous PV

D V P - P L C A P P L I C AT I O N M A N U A L

-

The previous PV is only for reference. You
7-123

7 Application Instructions API 50-99
Device No.

Function

Setup range

Explanation
can still modify it according to your need.

~

S3 +19:
For system use only.

S3 +20:
11. The explanation of 32-bit S3 and 16-bit S3 are almost the same. The difference is the capacity of S3+5 ~ S3+20.
PID Equations:
1.

The PID operation is conducted according to the speed and the differential PV.

2.

The PID operation has three control directions: automatic, foreward and inverse. Forward or inverse are
designated in S3 +4. Other relevant settings of PID operation are set by the registers designated in S3 ~ S3 +5.

3.

Basic PID equation:
MV = K P * E (t ) + K I * E (t )

1
+ K D * PV (t )S
S

PID equation

Control direction
Forward, automatic

E(t) = SV – PV

Inverse

E(t) = PV – SV

PV (t )S is the differential value of PV (t ) ; E (t ) 1 is the integral value of E (t ) . When E(t ) is less than 0
S

as the control direction is selected as forward or inverse, E(t ) will be regarded as “0".
The equation above illustrates that this instruction is different from a general PID instruction by the variable use
of the differential value. To avoid the flaw that the transient differential value is too big when a general PID
instruction is executed for the first time, our PID instruction monitors the differentiation status of the PV. When
the variation of PV is too big, this instruction will reduce the output of MV.
4.

Symbol explanation:
MV : Output value

K P : Proprotional gain

E (t ) : Error value

PV : Present measured value

SV : Target value
K D : Differential gain

PV (t )S : Differential value of PV(t)
K I : Integral gain
E (t )

5.

1 : Integral value of E(t)
S

Temperature Control Equation:
When S3 +4 is K3 and K4, the equation used in diagram 2 (see below) will be changed as:
MV =

7-124

⎤
1 ⎡
1 ⎛
1⎞
E (t ) +
⎜ E (t ) ⎟ + K D * PV (t )S ⎥
K P ⎢⎣
KI ⎝
S⎠
⎦

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
In which the error value is fixed as E(t) = SV – PV
This equation is exclusively designed for temperature control. Therefore, when the sampling time (TS) is set as 4
seconds (K400), the range of output value (MV) will be K0 ~ K4,000 and the cycle time of GPWM instruction
used together has to be set as 4 seconds (K4000) as well.
If you have no idea how to adjust the parameters, you can select K3 (auto-tuning) and after all the parameters
are adjusted (the control direction will be automatically set as K4), you can modify your parameters to better
ones according to the result of the control.
6.

Control diagrams:
PID instruction is within the dotted-lined area

KI

1/S
+

+

+

KP

G(s)
+
KD

S

Diagram 1:S3 + 4 = K0 ~ K2

In Diagram 1, S is differentiation, referring to “PV – previous PV / sampling time”. 1 / S is integration, referring to
“(previous integral value + error value) × sampling time”. G(S) refers to the device being controlled.
PID operation is within the dotted-lined area

1/S

1/K I
+

+

+

1/K P

G(s)

+
KD

S

Diagram 2: S 3 + 4 = K3 ~ K4

In Diagram 2, 1/KI and 1/KP refer to “divided by KI” and “divided by KP”. Due to that this is exclusively for
temperature control, you have to use PID instruction together with GPWM instruction. See Application 3 for
more details.
7.

Notes:

D V P - P L C A P P L I C AT I O N M A N U A L

7-125

7 Application Instructions API 50-99
a) S3 + 6 ~ S3 + 13 are only available in SA/SX/SC/EH/EH2/SV series, and ES/EX/SS (v5.7 and above) series
MPU.
b) PID instruction can only be used once in ES/EX/SS (v5.6 and below) series MPU. There is no limitation on
the times of using PID instruction in ES/EX/SS (v5.7 and above) series and SA/SX/SC/EH/EH2/SV/EH3/SV2
series MPU.
c) S3 + 3 of ES/EX/SS (v5.7 and below), SA/SX/SC (v1.1 and below) and EH (v1.0 and below) series MPU can
only be the value within 0 ~ 30,000.
d) There are a lot of circumstances where PID instruction can be applied; therefore, please choose the control
functions appropriately. For example, when you select parameter auto-tuning for the temperature (S3 + 4 =
K3), you cannot use it in a motor control environment in case improper control may occur.
e) When you adjust the three main parameters, KP, KI and KD (S3 + 4 = K0 ~ K2), you have to adjust KP first
(according to your experiences) and set KI and KD as 0. When you can roughly handle the control, you then
adjust KI (increasingly) and KD (increasingly) (see example 4 below for how to adjust). KP = 100 refers to
100%, i.e. the gain of the error is 1. KP < 100% will decrease the error and KP > 100% will increase the error.
f)

When you select the parameter exclusively for temperature control (S3 + 4 = K3, K4), it is suggested that you
store the parameter in D register in the latched area in case the automatically adjusted parameter will
disappear after the power is cut off. There is no guarantee that the adjusted parameter is suitable for every
control. Therefore, you can modify the adjusted parameter according to your actual need, but it is suggested
that you modify only KI or KD.

g) PID instruction can to work with many parameters; therefore please do not randomly modify the parameters
in case the control cannot be executed normally.
Example 1: Diagram of using PID instruction in position control (S3 + 4 = 0)

Position instruction
(SV)

MV

PID

Controlled
device

Encoder
PV

Example 2: Diagram of using PID instruction with AC motor drive on the control (S3 + 4 = 0)
S+MV

Speed instruction (S)

AC motor
drive

Acceleration/deceleration
output (MV)
Acceleration/deceleration
instruction (SV)

PID
Actual acceleration/
deceleration speed
(PV = S - P)

7-126

Speed
detection
device (P)

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
Example 3: Diagram of using PID instruction in temperature control (S3 + 4 = 1)

Temperature instruction (SV)

Heating (MV)

PID

Actual temperature
(PV)

Heater

Temperature
detection
device

Example 4: How to adjust PID parameters
Assume that the transfer function of the controlled device G(S) in a control system is a first-order function
G (s ) =

b
(most models of motors are first-order function), SV = 1, and sampling time (TS) = 10ms, we
s+a

suggest you to follow the steps below for adjusting the parameters.
Step 1: Set KI and KD as 0 and KP as 5, 10, 20 and 40. Record the SV and PV respectively and the results
are as the figure below.
1.5

K P=40

SV=1

K P=20

K P =10

1

K P =5
0.5

0

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

Time (sec)

Step 2: From the figure, we can see that when KP = 40, there will be over-reaction, so we will not select it.
When KP = 20, the PV reaction curve will be close to SV and there will not be over-reaction, but due to its
fast start-up with big transient MV, we will consider to put it aside. When KP = 10, the PV reaction curve will
get close to SV value more smoothly, so we will use it. Finally when KP = 5, we will not consider it due to the
slow reaction.
Step 3: Select KP = 10 and adjust KI from small to big (e.g. 1, 2, 4 to 8). KI should not be bigger than KP.
Adjust KD from small to big (e.g. 0.01, 0.05, 0.1 and 0.2). KD should not exceed 10% of KP. Finally we
obtain the figure of PV and SV below.

D V P - P L C A P P L I C AT I O N M A N U A L

7-127

7 Application Instructions API 50-99
1.5

PV=SV
1

0.5

0

K P =10,K I =8,KD=0.2

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

Time (sec)

Note: This example is only for your reference. Please adjust your parameters to proper ones according to your
actual condition of the control system.
Application Examples:
Application 1 Using PID instruction in the pressure control system (use the diagram of Example 1).
Purpose: Enabling the control system to reach the target pressure.
Explanation: The system requires a gradual control. Therefore, the system will be overloaded or out of control if the
process progresses too fast.
Suggested solution:
Solution 1: Longer sampling time
Solution 2: Using delay instruction. See the figure below.
0rpm

0

3000
rpm

511
Pressure
instruction SV
delay
D1

Pressure
instruction
value (D0)

PV
A
wave

B
wave

Instruction
value

MV
MV converted
D5
to
speed

t
A wave

5V

pressure
meter

0

0V

511

10V

280
250
200
150
100
50

0

255

AC
Speed
motor
converted
drive
to
voltage D1116

Voltage
converted
to
instruction
value

D1110

0V

Instruction
value

280

7-128

PID

0

0

D2: Instruction interval value
D3: Instruction interval time
Adjusted by the user according to the actual condition
t
B wave

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
The example program of the instruction delay:
M1002
MOV

K10

D3

TMR

T0

D3

RST

T0

M0
T0

>

D0 D1

MOV

K50

D2

<

D0 D1

MOV

K-50

D2

=

D0 D1

MOV

K0

D2

ADD

D2

D1

D1

CMP

D2

K0

M10

M10
>

D1 D0

MOV

D0

D1

<

D1 D0

MOV

D0

D1

PID

D1

D1116

M12
M0
D10

D5

Application 2 Speed control system and pressure control system work individually (use diagram of Example 2).
Purpose: After the speed control operates in open loop for a period of time, adding into it the pressure control system
(PID instruction) for close loop control.
Explanation: Since the speed and pressure control systems are not interrelated, we have to structure a open loop for
speed control first following by a close loop pressure control. If you fear that the control instruction of the
pressure control system changes too fast, you can consider to add the instruction delay illustrated in
Application 1 into the control. See the control diagram below.
0
M2 = On

M3
D40
Speed
instruction

+

D32

D30
D31

0rpm
3,000rpm

D0
Pressure
instruction

+

255
Speed
converted D1116
to
voltage

AC
motor
drive

MV converted to
accel/decel value

M0 = On
Delay
(optional)

D1

SV

D5 MV
PID

PV

D1110

Pressure
meter

M1 = On

D V P - P L C A P P L I C AT I O N M A N U A L

7-129

7 Application Instructions API 50-99
Part of the example program:
M1002
MOV

K1000

D40

MOV

D0

D1

MOV

K0

D5

MOV

D40

D30

ADD

D30

D31

M0
M1
M3
M2

>

D32 K3000

MOV

K3000

D32

<

D32

MOV

K0

D32

DIV

D32

K11

MOV

K255

D32

MOV

D32

D1116

PID

D1

D1110

>

D32

K0

K255

D32

D32

M1
D10

D5

Application 3 Using auto-tuning on the parameter for the temperature control.
Purpose: Using auto-tuning to calculate the most suitable parameters for PID temperature control.
Explanation: You may not be familiar with the temperature environment for the first time, so you can use auto-tuning
(S3 + 4 = K3) for an initial adjustment. After this, PID instruction will become exclusively for temperature
control (S3 + 4 = K4). In this example, the control environment is an oven. See the example program
below.
M1002
MOV

K4000

D20

MOV

K400

D200

MOV

K800

D10

TO

K0

K2

K2

K1

F RO M

K0

K6

D11

K1

MOV

K3

D204

RST

M0

M1013

M0

7-130

D V P - P L C A P P L I C AT I O N M A N U A L

7 Application Instructions API 50-99
M1
PID

D10

D11

D200

GPWM

D0

D20

Y0

D0

END

The experiment result of auto-tuning:

Auto tuning area
S3+4 = k3

PID control area
S3+4 = k4

The experiment result of using the adjusted parameter exclusively for temperature control after auto-tuning:

From the figure above, we can see that the temperature control after auto-tuning is working fine and we use only
D V P - P L C A P P L I C AT I O N M A N U A L

7-131

7 Application Instructions API 50-99
approximately 20 minutes for the control. Next, we modify the target temperature from 80°C to 100°C and obtain the
result below.

From the result above, we can see that when the parameter is 100°C, we can still control the temperature without
spending too much time.

7-132

D V P - P L C A P P L I C AT I O N M A N U A L

8 Application Instructions API 100-149
API

Mnemonic

100

MODRD
Type

Function
Read Modbus Data

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
n

K
*
*
*

H KnX KnY KnM KnS T
*
*
*

Program Steps
C

D
*
*
*

E

F MODRD: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Address of communication device

S2: Address of data to be read

n: Length of read data

Explanations:
1.

Range of S1: K0 ~ K254

2.

Range of n: K1 ≤ n ≤ K6

3.

See the specifications of each model for their range of use.

4.

ES/EX/SS series MPU does not support E, F index register modification.

5.

Flags: See API 80 RS for explanations on M1120 ~ M1131, M1140 ~ M1143

6.

MODRD is a drive instruction exclusively for peripheral communication equipment in MODBUS ASCII mode
/RTU mode. The built-in RS-485 communication ports in Delta VFD drives (except for VFD-A series) are all
compatible with MODBUS communication format. MODRD can be used for controlling communication (read
data) of Delta drives.

7.

If the address of S2 is illegal to the designed communication device, the device will respond with an error, PLC
will records the error code in D1130 and M1141 will be On.

8.

The feedback (returned) data from the peripheral equipment will be stored in D1070 ~ D1085. After receiving
the feedback data is completed, PLC will auto-check if all data are correct. If there is an error, M1140 will be On.

9.

In ASCII mode, due to that the feedback data are all in ASCII, PLC will convert the feedback data into numerals
and store them in D1050 ~ D1055. D1050 ~ D1055 will be invalid in RTU mode.

10.

After M1140 or M1141 turn On, the program will send a correct datum to the peripheral equipment. If the
feedback datum is correct, M1140 and M1141 will be reset.

Program Example 1:
Communication between PLC and VFD-S series AC motor drives (ASCII Mode, M1143 = Off)

M1002
MOV

H87

SET

M1120

MOV

K100

SET

M1122

D1120

Set up communication protocol 9600, 8, E, 1

Retain communication protocol
D1129

Set up communication time-out: 100ms

X1

DVP-PLC Application Manual

Set up sending request

8-1

8 Application Instructions API 100-149
X0
MODRD

H2101

K1

K6

Set up communication instruction device address 01
data address H2101 data length 6 words

The received data are stored in D1070 ~ D1085 in ASCII format.
PLC will automatically convert the data into numerals and store
them in D1050 ~ D1055.
Sending/receiving of data is completed. The flag is reset.

Process of receiving data
M1127
receiving
completed

PLC
VFD-S

RST

M1127

VFD-S, PLC sends: “01 03 2101 0006 D4”
PLC , PLC receives: “01 03 0C 0100 1766 0000 0000 0136 0000 3B”

Registers for sent data (sending messages)
Register
D1089 low
D1089 high
D1090 low
D1090 high
D1091 low
D1091 high
D1092 low
D1092 high
D1093 low
D1093 high
D1094 low
D1094 high
D1095 low
D1095 high

‘0’
‘1’
‘0’
‘3’
‘2’
‘1’
‘0’
‘1’
‘0’
‘0’
‘0’
‘6’
‘D’
‘4’

DATA
30 H
31 H
30 H
33 H
32 H
31 H
30 H
31 H
30 H
30 H
30 H
36 H
44 H
34 H

ADR 1
ADR 0
CMD 1
CMD 0

Explanation
Address of AC motor
drive: ADR (1,0)
Instruction code: CMD
(1,0)

Starting data address

Number of data (counted by words)
LRC CHK 1
LRC CHK 0

Checksum: LRC CHK
(0,1)

Registers for received data (responding messages)
Register
D1070 low
D1070 high
D1071 low
D1071 high
D1072 low
D1072 high
D1073 low
D1073 high
D1074 low
D1074 high
D1075 low
D1075 high
D1076 low
D1076 high
D1077 low
D1077 high
D1078 low
D1078 high
D1079 low
D1079 high
D1080 low
D1080 high
D1081 low
D1081 high
D1082 low
D1082 high

8-2

‘0’
‘1’
‘0’
‘3’
‘0’
‘C’
‘0’
‘1’
‘0’
‘0’
‘1’
‘7’
‘6’
‘6’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘1’
‘3’
‘6’

DATA
30 H
31 H
30 H
33 H
30 H
43 H
30 H
31 H
30 H
30 H
31 H
37 H
36 H
36 H
30 H
30 H
30 H
30 H
30 H
30 H
30 H
30 H
30 H
31 H
33 H
36 H

Explanation
ADR 1
ADR 0
CMD 1
CMD 0
Number of data (counted by byte)
PLC automatically convert
Content of
ASCII codes to numerals
address 2101 H and store the numeral in
D1050 = 0100 H
PLC automatically convert
Content of
ASCII codes to numerals
address 2102 H and store the numeral in
D1051 = 1766 H
PLC automatically convert
Content of
ASCII codes to numerals
address 2103 H and store the numeral in
D1052 = 0000 H
PLC automatically convert
Content of
ASCII codes to numerals
address 2104 H and store the numeral in
D1053 = 0000 H
PLC automatically convert
Content of
ASCII codes to numerals
address 2105 H and store the numeral in
D1054 = 0136 H

DVP-PLC Application Manual

8 Application Instructions API 100-149
Register
D1083 low
D1083 high
D1084 low
D1084 high
D1085 low
D1085 high

‘0’
‘0’
‘0’
‘0’
‘3’
‘B’

DATA
30 H
30 H
30 H
30 H
33 H
42 H

Explanation
PLC automatically convert
Content of
ASCII codes to numerals
address 2106 H and store the numeral in
D1055 = 0000 H
LRC CHK 1
LRC CHK 0

Program Example 2:
Communication between PLC and VFD-S series AC motor drives (RTU Mode, M1143 = On)
M1002

Set up communication protocol 9600, 8, E, 1

MOV

H87

D1120

SET

M1120

MOV

K100

SET

M1143

Set up as RTU mode

SET

M1122

Set up as sending flag

MODRD

K1

Retain communication protocol
Set up communication time-out: 100ms

D1129

X0
X0
H2102

Process of receiving data
M1127
receiving
completed

PLC
VFD-S

RST

M1127

Set up communication instruction
device address 01 data address H2102
data length 2 words
The received data in hex are stored in D1070 ~ D1085.
K2

Sending/receiving of data is completed.
The flag is reset.

VFD-S, PLC sends: 01 03 2102 0002 6F F7
PLC, PLC receives: 01 03 04 1770 0000 FE 5C

Registers for sent data (sending messages)
Register
D1089 low
D1090 low
D1091 low
D1092 low
D1093 low
D1094 low
D1095 low
D1096 low

DATA
01 H
03 H
21 H
02 H
00 H
02 H
6F H
F7 H

Explanation
Address
Function
Starting data address
Number of data (counted by words)
CRC CHK Low
CRC CHK High

Registers for received data (responding messages)
Register
D1070 low
D1071 low
D1072 low
D1073 low
D1074 low
D1075 low
D1076 low
D1077 low
D1078 low

DATA
01 H
03 H
04 H
17 H
70 H
00 H
00 H
FE H
5C H

DVP-PLC Application Manual

Explanation
Address
Function
Number of data (counted by bytes)
Content of address 2102 H
Content of address 2103 H
CRC CHK Low
CRC CHK High

8-3

8 Application Instructions API 100-149
Program Example 3:
1.

In the communication between PLC and VFD-S series AC motor drive (ASCII Mode, M1143 = Off), retry when
communication time-out, data receiving error and sending address error occur.

2.

When X0=On, PLC will read the data in VFFD-S data adress H2100 of device 01 and stores the data in ASCII
format in D1070 ~ D1085. PLC will automatically convert the data into numerals and stores them in D1050 ~
D1055.

3.

M1129 will be On when communication time-out occurs. The program will trigger M1129 and send request to
M1122 for reading the data again.

4.

M1140 will be On when data receiving error occurs. The program will trigger M1140 and send request to
M1122 for reading the data again.

5.

M1141 will be On when sending address error occurs. The program will trigger M1141 and send request to
M1122 for reading the data again.
M1002
MOV

H87

SET

M1120

MOV

K100

SET

M1122

D1120

Set up communication protocol to 9600, 8, E, 1

Retain communication protocol
D1129

Set up communication time-out: 100ms

X0
Set up communication time-out: 100ms

M1129
Communication time-out Retry
M1140
Data receiving error Retry
M1141
X0

M1127

sending address error Retry
K1

MODRD

H2100

receiving completed
handle received data

K6

Set up communication instruction:
device address 01, data address H2100
data length 6 words

The received data are stored in D1070~D1085 in ASCII
format. PLC will automatically convert the data into
numerals and store them in D1050~D1055.

RST

M1127

Sending/receiving of data is completed. The flag is reset.

RST

M1129

Communication time-out. The flag is reset.

M1129

Remarks:
1.

The activation criteria placed before the three instructions, API 100 MODRD, API 105 RDST, and API 150
MODRW (Function Code H03), cannot use rising-edge contacts (LDP, ANDP ORP) and falling-edge contacts
(LDF, ANDF, ORF); otherwise, the data stores in the receiving registers will be incorrect.

2.

M1127 for MODRD instruction stands for the response of data is completed. M1127 will only be On if the
responded data are correct. M1123 will be On no matter the responded data are correct or wrong.

3.

There is no limitation on the times of using this instruction in the program, but only one instruction is allowed to
be executed at a time.

8-4

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

101

MODWR
Type

Y

Function
Write Modbus Data

Bit Devices
X

OP

Operands

M

Word Devices
S

S1
S2
n

K
*
*
*

H KnX KnY KnM KnS T
*
*
*

Program Steps
C

D
*
*
*

E

F MODWR: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Address of communication device

S2: Address of data to be read

n: Data to be written

Explanations:
1.

Range of S1: K0 ~ K254

2.

See the specifications of each model for their range of use.

3.

ES/EX/SS series MPU does not support E, F index register modification.

4.

Flags: See API 80 RS for explanations on M1120 ~ M1131, M1140 ~ M1143

5.

MODWR is a drive instruction exclusively for peripheral communication equipment in MODBUS ASCII
mode/RTU mode. The built-in RS-485 communication ports in Delta VFD drives (except for VFD-A series) are
all compatible with MODBUS communication format. MODRD can be used for controlling communication (write
data) of Delta drives.

6.

If the address of S2 is illegal to the designed communication device, the device will respond with an error, PLC
will records the error code in D1130 and M1140 will be On. For example, if 8000H is illegal to VFD-S, M1141
will be On and D1130 = 2. For error codes, see the user manual of VFD-S.

7.

The feedback (returned) data from the peripheral equipment will be stored in D1070 ~ D1076. After receiving
the feedback data is completed, PLC will auto-check if all data are correct. If there is an error, M1140 will be
On.

8.

After M1140 or M1141 turn On, the program will send a correct datum to the peripheral equipment. If the
feedback datum is correct, M1140 and M1141 will be reset.

Program Example 1:
Communication between PLC and VFD-S series AC motor drives (ASCII Mode, M1143 = Off)

DVP-PLC Application Manual

8-5

8 Application Instructions API 100-149
M1002
MOV

H87

SET

M1120

MOV

K100

SET

M1122

MODWR

K1

Set up communication protocol 9600, 8, E, 1

D1120

Retain communication protocol
Set up communication time-out: 100ms

D1129

X1

Set up sending request

X0
H0100

M1127
Process of receiving data
receiving
completed

PLC
VFD-B

RST

M1127

H1770

Set up communication instruction device address 01
data address H0100 data H1770

The received data are stored in D1070 ~ D1085 in ASCII format.
PLC will automatically convert the data into numerals and store
them in D1050 ~ D1055.

Sending/receiving of data is completed. The flag is reset.

VFD-B, PLC sends: “ 01 06 0100 1770 71 ”
PLC, PLC receives: “ 01 06 0100 1770 71 ”

Registers for sent data (sending messages)
Register
D1089 low
D1089 high
D1090 low
D1090 high
D1091 low
D1091 high
D1092 low
D1092 high
D1093 low
D1093 high
D1094 low
D1094 high
D1095 low
D1095 high

DATA
‘0’
‘1’
‘0’
‘6’
‘0’
‘1’
‘0’
‘0’
‘1’
‘7’
‘7’
‘0’
‘7’
‘1’

30 H
31 H
30 H
36 H
30 H
31 H
30 H
30 H
31 H
37 H
37 H
30 H
37 H
31 H

Explanation
ADR 1
ADR 0
CMD 1
CMD 0

Address of AC motor drive:
ADR (1,0)
Instruction code: CMD (1,0)

Data address

Data contents
LRC CHK 1
LRC CHK 0

Error checksum: LRC CHK
(0,1)

PLC receiving data register (response messages)
Register
D1070 low
D1070 high
D1071 low
D1071 high
D1072 low
D1072 high
D1073 low
D1073 high
D1074 low
D1074 high
D1075 low
D1075 high
D1076 low
D1076 high

DATA
‘0’
‘1’
‘0’
‘6’
‘0’
‘1’
‘0’
‘0’
‘1’
‘7’
‘7’
‘0’
‘7’
‘1’

30 H
31 H
30 H
36 H
30 H
31 H
30 H
30 H
31 H
37 H
37 H
30 H
37 H
31 H

Explanation
ADR 1
ADR 0
CMD 1
CMD 0
Data address

Data content
LRC CHK 1
LRC CHK 0

Program Example 2:
Communication between PLC and VFD-S series AC motor drives (RTU Mode, M1143 = On)

8-6

DVP-PLC Application Manual

8 Application Instructions API 100-149
M1002
Set up communication protocol 9600, 8, E, 1

MOV

H87

SET

M1120

MOV

K100

SET

M1143

Set up as RTU mode

SET

M1122

Set up as sending flag

MODWR

K1

X0

D1120

Retain communication protocol
Set up communication time-out: 100ms

D1129

X0
H2000

Process of receiving data
M1127
receiving
completed

PLC
VFD-S

RST

M1127

H12

Set up communication instruction device address 01
data address H2000 Write in data H12

The received data in hex are stored in D1070 ~ D1085.

Sending/receiving of data is completed.
The flag is reset.

VFD-S, PLC sends: 01 06 2000 0012 02 07
PLC, PLC receives: 01 06 2000 0012 02 07

Registers for sent data (sending messages)
Register
D1089 low
D1090 low
D1091 low
D1092 low
D1093 low
D1094 low
D1095 low
D1096 low

DATA
01 H
06 H
20 H
00 H
00 H
12 H
02 H
07 H

Explanation
Address
Function
Data address
Data contents
CRC CHK Low
CRC CHK High

Registers for received data (responding messages)
Register
D1070 low
D1071 low
D1072 low
D1073 low
D1074 low
D1075 low
D1076 low
D1077 low

DATA
01 H
06 H
20 H
00 H
00 H
12 H
02 H
07 H

Explanation
Address
Function
Data address
Data contents
CRC CHK Low
CRC CHK High

Program Example 3:
1. In the communication between PLC and VFD-S series AC motor drive (ASCII Mode, M1143 = Off), retry when
communication time-out, data receiving error and sending address error occur.
2. When X0 = On, PLC will write H1770(K6000) into VFD-S data adress H0100 of device 01.
3. M1129 will be On when communication time-out occurs. The program will trigger M1129 and send request to
M1122 for writing the data again.
4. M1140 will be On when data receiving error occurs. The program will trigger M1140 and send request to M1122
for writing the data again.
5. M1141 will be On when sending address error occurs. The program will trigger M1141 and send request to
M1122 for writing the data again.

DVP-PLC Application Manual

8-7

8 Application Instructions API 100-149
M1002
MOV

H87

SET

M1120

MOV

K100

SET

M1122

D1120

Set up communication protocol to 9600, 8, E, 1

Retain communication protocol
D1129

Set up communication time-out: 100ms

X0
Set up transmission request

M1129
Communication time-out Retry
M1140
M1141

Data receiving error Retry
Sending address error Retry

X0
K1

MODWR
M1127

H0100

H1770

Set up communication instruction:
device address 01, data address H0100 data H1770

receiving completed
handle received data
RST

M1127

RST

M1129

The received data are stored in D1070 ~ D1085 in ASCII format.
Sending/receiving of data is completed. The flag is reset.

M1129
Communication time-out. The flag is reset.

Program Example 4:
1. In the communication between PLC and VFD-S series AC motor drive (ASCII Mode, M1143 = Off), retry when
communication time-out, data receiving error and sending address error occur. Times of retry = D0 (default = 3).
When communication Retry is successful, the user can return to controlling by triggering criteria.
2. When X0 = On, PLC will write H1770(K6000) into VFD-S data adress H0100 of device 01.
3. M1129 will be On when communication time-out occurs. The program will trigger M1129 and send request to
M1122 for writing the data again. Times of Retry = D0 (default = 3)
4. M1140 will be On when data receiving error occurs. The program will trigger M1140 and send request to M1122
for writing the data again. Times of Retry = D0 (default = 3)
5. M1141 will be On when sending address error occurs. The program will trigger M1141 and send request to
M1122 for writing the data again. Times of Retry = D0 (default = 3)

8-8

DVP-PLC Application Manual

8 Application Instructions API 100-149
M1002
D1120

MOV

H87

SET

M1120

MOV

K100

D1129

MOV

K3

D0

SET

M1122

Set up communication protocol
to 9600, 8, E, 1

Retain communication protocol
Set up communication
time-out: 100ms

X0
M1129
M1140
M1141

LD>=

D0

D100

Set up transmission request

Communication time-out Retry

Data receive error Retry
Sending address error Retry

X0
MODWR

K1

INC

D100

H0100

M1122
M1127 Receiving completed
handle received data
RST

M1127

RST

D100

RST

M1129

RST

M1140

RST

M1141

M1129

H1770

Set up communication instruction:
device address 01, data address H0100
data H1770

The received data are stored in D1070 ~ D1085 in ASCII
format.

Sending/receiving of data is completed. The flag is reset.

Communication time-out. The flag is reset.

M1140
M1141

Remarks:
1.

For the registers for flag settings, see explanations in API 80 RS.

2.

The activation criteria placed before the two instructions, API 101 MODWR and API 150 MODRW (Function
Code H06, H10), cannot use rising-edge contacts (LDP, ANDP ORP) and falling-edge contacts (LDF, ANDF,
ORF) and have to enable sending request M1122 first.

3.

M1127 for MODWR instruction stands for the response of data is completed. M1127 will only be On if the
responded data are correct. M1123 will be On no matter the responded data are correct or wrong.

4.

There is no limitation on the times of using this instruction in the program, but only one instruction is allowed to
be executed at a time.

DVP-PLC Application Manual

8-9

8 Application Instructions API 100-149
API

Mnemonic

102

FWD

Type

Operands

Function
Forward Running of VFD-A

Bit Devices
X

OP

Y

M

Word Devices
S

S1
S2
n

K
*
*
*

H KnX KnY KnM KnS T
*
*
*

Program Steps
C

D
*
*
*

E

F FWD: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

API

Mnemonic

103

REV

Type

Operands

Function
Reverse Running of VFD-A

Bit Devices
X

OP

Controllers

Y

M

ES/EX/SS SA/SX/SC EH/SV

Word Devices
S

S1
S2
n

K
*
*
*

H KnX KnY KnM KnS T
*
*
*

Program Steps
C

D
*
*
*

E

F REV: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

API

Mnemonic

104

STOP

Type

Function

Controllers

Stop VFD-A
Bit Devices

X

OP

Operands

Y

M

S1
S2
n

ES/EX/SS SA/SX/SC EH/SV

Word Devices
S

K
*
*
*

H KnX KnY KnM KnS T
*
*
*

Program Steps
C

D
*
*
*

E

F STOP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Address of communication device

S2: Rotation frequency of AC motor drive

n: Target to be instructed

Explanations:
1.

Range of S1: K0 ~ K31

2.

Range of n: K1 or K2

3.

See the specifications of each model for their range of use.

4.

ES series MPU does not support E, F index register modification.

5.

Flags: See API 80 RS for explanations on M1120 ~ M1131, M1140 ~ M1143

6.

FWD/REV/STOP are handy instructions exclusively for Delta VFD-A/H series AC motor drive to perform
forward running/reverse running/stop. Be sure to set up communication time-out (D1129) when executing this
instruction.

8-10

DVP-PLC Application Manual

8 Application Instructions API 100-149
7.

S2 = operation frequency of AC motor drive. Set frequency in A-series AC motor drive: K0 ~ K4,000 (0.0Hz ~
400.0Hz). Set frequency in H-series: K0 ~ K1,500 (0Hz ~ 1,500Hz).

8.

n = instructed target. n=1: AC motor drive at designated address. n=2: all connected AC motor drives.

9.

The feedback (returned) data from the peripheral equipment will be stored in D1070 ~ D1080. After receiving
the feedback data is completed, PLC will auto-check if all data are correct. If there is an error, M1142 will be On.
When n = 2, PLC will not receive any data.

Program Example :
Communication between PLC and VFD-A series AC drives, retry for communication time-out and received data error.
M1002
MOV

H0073

D1120

SET

M1120

MOV

K100

D1129

FWD

K0

K500

SET

M1122

Set up communication protocol to 4800, 8, O, 1

Retain communication protocol
Set up communication time-out: 100ms

X0
K1

Communication command setting:Device address: 0
Frequency: 500Hz K1: indicated AC motor drive

X0
M1129
M1142
M1127

Set up transmission request

Communication time-out Retry
Data receive error Retry
Receiving completed
handle received data
RST

PLC
VFD-A

M1127

The received data are stored in the low bit group of
D1070 ~ D1080 by ASCI format.

Sending/receiving of data is completed. The flag is reset.

VFD-A, PLC sends: “C ♥ ☺ 0001 0500 ”
PLC, PLC sends: “C ♥ ♠ 0001 0500 ”

Registers for sent data (sending messages)
Register
D1089 low
D1090 low
D1091 low
D1092 low
D1093 low
D1094 low
D1095 low
D1096 low
D1097 low
D1098 low
D1099 low

‘C’
‘♥’
‘☺’
‘0’
‘0’
‘0’
‘1’
‘0’
‘5’
‘0’
‘0’

DVP-PLC Application Manual

DATA
43 H
03 H
01 H
30 H
30 H
30 H
31 H
30 H
35 H
30 H
30 H

Explanation
Start word of instruction
Checksum
Instructed target
Communication address

Running instruction

8-11

8 Application Instructions API 100-149
Registers for received data (responding messages)
Register
D1070 low
D1071 low
D1072 low
D1073 low
D1074 low
D1075 low
D1076 low
D1077 low
D1078 low
D1079 low
D1080 low

DATA
‘C’
‘♥’
‘♠’
‘0’
‘0’
‘0’
‘1’
‘0’
‘5’
‘0’
‘0’

43 H
03 H
06 H
30 H
30 H
30 H
31 H
30 H
35 H
30 H
30 H

Explanation
Start word of instruction
Checksum
Reply authorization (correct: 06H, incorrect: 07 H)
Communication address

Running instruction

Remarks:
There is no limitation on the times of using this instruction in the program, but only one instruction is allowed to be
executed at a time.

8-12

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

105

RDST

Type

Function
Read VFD-A Status

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
n

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*

E

F RDST: 5 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Address of communicatino device

n: Target to be instructed

Explanations:
1.

Range of S: K0 ~ K31

2.

Range of n: K0 ~ K3

3.

See the specifications of each model for their range of use.

4.

ES series MPU does not support E, F index register modification.

5.
6.

Flags: See API 80 RS for explanations on M1120 ~ M1131, M1140 ~ M1143
n: Instructed target (to be read) in AC motor drive
n=0,
frequency
n=1,
output frequency
n=2,
output current
n=3,
running instruction
Data sent back (feedback) from AC motor drive (11 bytes, see VFD-A user manual) are stored in the low bytes

7.

of D1070 ~ D1080.
”Q, S, B, Uu, Nn, ABCD”
Feedback
Q
S
B
U
U
N
N
A
B
C
D

Explanation
Start word: ’Q’ (51H).
Checksum code: 03H.
Instruction authorization. correct: 06H, incorrect: 07H.
Communication address (address: 00~31). ”Uu” = (“00” ~ ”31”) indicated
in ASCII format.
Instructed target (00 ~ 03).”Nn” = (“00 ~ 03”) indicated in ASCII format.
Instructed data. The content of ”ABCD” differs upon the instructed targets
(00 ~ 03). 00 ~ 03 indicate frequency, current and running mode
respectively. Please refer to the explanations below for details.
Nn = “00”
Nn = “01”
Nn = “02”

Data storage
D1070 low
D0171 low
D1072 low
D1073 low
D1074 low
D1075 low
D1076 low
D1077 low
D1078 low
D1079 low
D1080 low

Frequency instruction = ABC.D (Hz)
Output instruction = ABC.D (Hz)
Output current = ABC.D (A)

PLC will automatically convert the ASCII characters of ”ABCD” into numerals and store the
numeral in D1050. For example, assume ”ABCD” = “0600”, PLC will convert ABCD into K0600
(0258 H) and store it in the special register D1050.

DVP-PLC Application Manual

8-13

8 Application Instructions API 100-149
Nn = “03”
‘A’ =

‘B’ =

“CD” =

Running instruction
‘0’
Stop,
‘5’ JOG (forward)
‘1’
Forward running
‘6’ JOG (reverse)
‘2’
Stop,
‘7’ JOG (reverse)
‘3’
Reverse running
‘8’ Abnormal
‘4’
JOG (forward),
ES series PLCs will convert the ASCII characters of ”A” into a numeral and store the
numeral in D1051. For example, assume ”A” = “3”, PLC will convert A into K3 and
store it in the special register D1051. SA/EH series PLCs will store the numeral in low
bytes of D1051.
b7
b6
b5
b4
Source of running instruction
0
0
0
0
Digital keypad
0
0
0
1
1st Step Speed
0
0
1
0
2nd Step Speed
0
0
1
1
3rd Step Speed
0
1
0
0
4th Step Speed
0
1
0
1
5th Step Speed
0
1
1
0
6th Step Speed
0
1
1
1
7th Step Speed
1
0
0
0
JOG frequency
1
0
0
1
Analog signal frequency instruction
1
0
1
0
RS-485 communication interface
1
0
1
1
Up/Down control
b3
= 0 No DC braking stop
1 DC braking stop
b2
= 0 No DC braking startup 1 DC braking startup
b1
= 0 Forward running
1 Reverse running
b0
= 0 Stop
1 Running
ES series PLCs will store ”B” in special auxiliary relay M1168 (b0) ~ M1175 (b7).
SA/EH series PLCs will store “B” (in hex) in the high bytes of special register D1051.
“00”
No abnormal record
“10”
OcA
“01”
oc
“11”
Ocd
“02”
ov
“12”
Ocn
“03”
oH
“13”
GFF
“04”
oL
“14”
Lv
“05”
oL1
“15”
Lv1
“06”
EF
“16”
cF2
“07”
cF1
“17”
bb
“08”
cF3
“18”
oL2
“09”
HPF
“19”
ES/SA/EH series PLCs will convert the ASCII characters of ”CD” into a numerals and
store the numeral in D1052. For example, assume ”CD” = “16”, PLC will convert CD
into K16 and store it in the special register D1052.

Remarks:
1.

The activation criteria placed before the three instructions, API 100 MODRD, API 105 RDST and API 150
MODRW (Function Code 03), cannot use rising-edge contacts (LDP, ANDP ORP) and falling-edge contacts
(LDF, ANDF, ORF); otherwise, the data stores in the receiving registers will be incorrect.

2.

For the registers for flag settings, see explanations in API 80 RS.

3.

There is no limitation on the times of using this instruction in the program, but only one instruction is allowed to
be executed at a time.

8-14

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

106

RSTEF

Type

Function
Reset Abnormal VFD-A

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
n

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*

E

F RSTEF: 5 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Address of communication device

n: Target to be instructed

Explanations:
1.

Range of S: K0 ~ K31

2.

Range of n: K1 or K2

3.

See the specifications of each model for their range of use.

4.

Flags: See API 80 RS for explanations on M1120 ~ M1131, M1140 ~ M1143

5.

RSTEF is a handy communication instruction exclusively for Delta VFD-A series AC motor drives and is used
for reset when the AC motor drive operates abnormally.

6.

n: instructed target. n=1: AC motor drive at assigned address. n=2: all connected AC motor drives.

7.

The feedback (returned) data from the peripheral equipment will be stored in D1070 ~ D1089. If n = 2, there will
be no feedback data.

Remarks:
1.

The activation criteria placed before the three instructions, API 100 MODRD, API 105 RDST and API 150
MODRW (Function Code 03), cannot use rising-edge contacts (LDP, ANDP ORP) and falling-edge contacts
(LDF, ANDF, ORF); otherwise, the data stores in the receiving registers will be incorrect.

2.

For the registers for flag settings, see explanations in API 80 RS.

3.

There is no limitation on the times of using this instruction in the program, but only one instruction is allowed to
be executed at a time.

DVP-PLC Application Manual

8-15

8 Application Instructions API 100-149
API

Mnemonic

107

LRC
Type

Function
Checksum LRC Mode

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
n
D

K

H KnX KnY KnM KnS T

*

*

Program Steps
C

D
*
*
*

E

F LRC, LRCP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start operation device for ASCII mode checksum
operation result

n: Number of calculated bits

D: Start device for storing the

LRC checksum: See remarks.

Explanations:
1.

Range of n: K1 ~ K256

2.

See the specifications of each model for their range of use.

3.

Flag: M1161 (switching between 8/16 bit modes)

4.

n has to be even. If n does not fall within its range, an operation error will occur, the instruction will not be
executed, M1067, M1068 = On and D1067 will record the error code H’0E1A.

5.

In 16-bit conversion mode: When M1161 = Off, S divides its hex data area into higher 8 bits and lower 8 bits
and performs LRC checksum operation on each bit. The data will be sent to the higher 8 bits and lower 8 bits in
D. n = the number of calculated bits.

6.

In 8-bit conversion mode: When M1161 = On, S divides its hex data area into higher 8 bits (invalid data) and
lower 8 bits and performs LRC checksum operation on each bit. The data will be sent to the lower 8 bits in D
and occupy 2 registers. n = the number of calculated bits. (All higher bits in D are “0”.)

Program Example:
When PLC communicates with VFD-S series AC motor drives (In ASCII mode, M1143 = Off), (In 8-bit mode, M1161 =
On), the sent data write in advance the 6 data read starting from H2101 of VFD-S.
M1002
MOV

H86

SET

M1120

MOV

K100

D1120

Set up communication protocol to 9600, 7, E, 1

Retain communication protocol
D1129

Set up communication time-out: 100ms

sending request pulse
Write in sent data in advance
pulse
SET

M1122

RS

D100

Set up transmission request

X10
K17

D120

K35

receiving completed
Process of receiving data
M1123
RST

8-16

M1123

Sending/receiving of data is completed.
The flag is reset.

DVP-PLC Application Manual

8 Application Instructions API 100-149
PLC

VFD-S, PLC sends: “: 01 03 2101 0006 D4 CR LF ”

Registers for sent data (sending messages)
Register
D100 low
D101 low
D102 low
D103 low
D104 low
D105 low
D106 low
D107 high
D108 low
D109 low
D110 low
D111 low
D112 low
D113 low
D114 low
D115 low
D116 low

DATA
‘: ’
‘0’
‘1’
‘0’
‘3’
‘2’
‘1’
‘0’
‘1’
‘0’
‘0’
‘0’
‘6’
‘D’
‘4’
CR
LF

Explanation

3A H
30 H
31 H
30 H
33 H
32 H
31 H
30 H
31 H
30 H
30 H
30 H
36 H
44 H
34 H
AH
DH

STX
ADR 1
ADR 0
CMD 1
CMD 0

Address of AC motor
drive: ADR (1,0)
Instruction code: CMD
(1,0)

Starting data address

Number of data (counted by words)
LRC CHK 1
LRC CHK 0

Error checksum: LRC
CHK (0,1)

END

The error checksum LRC CHK (0,1) can be calculated by LRC instruction (in 8-bit mode, M1161 = On).
M1000
LRC

D101

K12

D113

LRC checksum: 01 H + 03 H + 21 H + 01 H + 00 H + 06 H = 2C H. Obtain 2’s complement, D4H, and store ‘D’(44H) in
the lower 8 bits of D113 and ‘4’(34H) in the lower 8 bits of D114.
Remarks:
1.

The format of ASCII mode with a communication datum
STX
Address Hi
Address Lo
Function Hi
Function Lo
DATA (n-1)
…….
DATA 0

LRC CHK Hi
LRC CHK Lo
END Hi
END Lo
2.

‘: ’
‘0’
‘1’
‘0’
‘3’
‘2’
‘1’
‘0’
‘2’
‘0’
‘0’
‘0’
‘2’
‘D’
‘7’
CR
LF

Start word = ‘: ’ (3AH)
Communication:
8-bit address consists of 2 ASCll codes
Function code:
8-bit function consists of 2 ASCll codes
Data content:
n × 8-bit data consists of 2n ASCll
codes

LRC checksum:
8-bit checksum consists of 2 ASCll codes
End word:
END Hi = CR (0DH), END Lo = LF(0AH)

LRC checksum: 2’s complement of the summed up value of communication address and data. For example,
01 H + 03 H + 21 H + 02 H + 00 H + 02 H = 29 H. Obtain 2’s complement = D7H.

DVP-PLC Application Manual

8-17

8 Application Instructions API 100-149
API

Mnemonic

108

CRC
Type

Function
Checksum CRC Mode

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
n
D

K

H KnX KnY KnM KnS T

*

*

Program Steps
C

D
*
*
*

E

F CRC, CRCP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start operation device for RTU mode checksum
operation result

n: Number of calculated bits

D: Start device for storing the

CRC checksum: See remarks.

Explanations:
1.

Range of n: K1 ~ K256

2.

Flags: M1161 (switching between 8/16-bit modes)

3.

If n does not fall within its range, an operation error will occur, the instruction will not be executed, M1067,
M1068 = On and D1067 will record the error code H’0E1A.

4.

In 16-bit conversion mode: When M1161 = Off, S divides its hex data area into higher 8 bits and lower 8 bits
and performs CRC checksum operation on each bit. The data will be sent to the higher 8 bits and lower 8 bits in
D. n = the number of calculated bits.

5.

In 8-bit conversion mode: When M1161 = On, S divides its hex data area into higher 8 bits (invalid data) and
lower 8 bits and performs CRC checksum operation on each bit. The data will be sent to the lower 8 bits in D
and occupy 2 registers. n = the number of calculated bits. (All higher 8 bits in D are “0”.)

Program Example:
When PLC communicates with VFD-S series AC motor drives (In RTU mode, M1143 = On), (In 16-bit mode, M1161 =
On), the sent data write in advance H12 into H2000 of VFD-S.
M1002

transmission
request

D1120

Set up communication protocol
to 9600, 8, E, 1

MOV

H87

SET

M1120

MOV

K100

SET

M1143

RTU Mode

SET

M1161

8-bit Mode

Retain communication protocol
D1129

Set up communication
time-out: 100ms

Write transmitting data in advance
pulse
SET

M1122

RS

D100

Set up transmission request

X10

8-18

K8

D120

K8

DVP-PLC Application Manual

8 Application Instructions API 100-149
receiving completed
Process received data
M1123
RST

PLC

M1123

Receiving completed and flag reset

VFD-S, PLC sends: 01 06 2000 0012 02 07

Registers for sent data (sending messages)
Register
D100 low
D101 low
D102 low
D103 low
D104 low
D105 low
D106 low
D107 low

DATA
01 H
06 H
20 H
00 H
00 H
12 H
02 H
07 H

Explanation
Address
Function
Data address
Data content
CRC CHK 0
CRC CHK 1

The error checksum CRC CHK (0,1) can be calculated by CRC instruction (in 8-bit mode, M1161 = On).
M1000
CRC

D100

K6

D106

CRC checksum: 02 H is stored in the lower 8 bits of D106 and 07 H in the lower 8 bits of D107,
Remarks:
1.

The format of RTU mode with a communication datum
START
Address
Function
DATA (n-1)
…….
DATA 0
CRC CHK Low
CRC CHK High
END

2.

Time interval
Communication address: 8-bit binary
Function code: 8-bit binary
Data content:
n × 8-bit data
CRC checksum:
16-bit CRC checksum consists of 2 8-bit binaries
Time interval

CRC checksum starts from Address and ends at Data content.
The operation of CRC checksum:
Step 1: Make the 16-bit register (CRC register) = FFFFH
Step 2: Exclusive OR the first 8-bit byte message instruction and the low-bit 16-bit CRC register. Store the
result in CRC register.
Step 3: Shift the CRC register one bit to the right and fill 0 in the higher bit.
Step 4: Check the value that shifts to the right. If it is 0, store the new value from Step 3 into the CRC register,
otherwise, Exclusive OR A001H and the CRC register, and store the result in the CRC register.
Step 5: Repeat Step 3 ~ 4 and finish calculating the 8 bits.
Step 6: Repeat Steps 2 ~ 5 for obtaining the next 8-bit message instruction until all the message instructions
are calculated. In the end, the obtained CRC register value is the CRC checksum. Be aware that
CRC checksum should be placed in the checksum of the message instruction.

DVP-PLC Application Manual

8-19

8 Application Instructions API 100-149
API

Mnemonic

109

SWRD
Type

Function
Read Digital Switch

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K

D

H KnX KnY KnM KnS T
*
*
*
*

Program Steps
C
*

D
*

E
*

F SWRD, SWRDP: 3 steps
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device for storing the read value
Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1104 ~ M1111 (status of digital switch)

3.

This instruction stores the value read from digital switch function card into D.

4.

The read value is stored in the low byte in D. Every switch has a corresponding bit.

5.

When there is no digital function card inserted, the error message C400 (hex) will appear in grammar check.

Program Example:
1.

There are l 8 DIP switches on the digital switch function card. After the switches are read by SWRD instruction,
the status of each switch will correspond to M0 ~ M7.
M1000
SWRD

K2M0

M0
Y0
M1
MOV

K2M0

D0

CNT

C0

K10

RST

C0

TMR

T0

M2
M3
M4
K100

2.

The status of M0 ~ M7 can be executed by each contact instruction.

3.

The execution of END instruction indicates that the process of input is completed. REF (I/O refresh) instruction
will be invalid.

4.

When SWRD instruction uses the data in digital switch function card, it can read minimum 4 bits (K1Y*, K1M*
or K1S*).

Remarks:
When digital switch function card is inserted, the status of the 8 DIP switches will correspond to M1104 ~ M1111.

8-20

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

110

D

Floating Point Compare

Bit Devices

Word Devices

X

OP

Function

P

ECMP

Type

Operands

Y

M

S

*

*

*

S1
S2
D

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*

E

F DECMP, DECMPP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Binary floating point comparison value 1

S2: Binary floating point comparison value 2

D: Comparison

result
Explanations:
1.

D occupies 3 consecutive devices.

2.

See the specifications of each model for their range of use.

3.

The binary floating point values S1 and S2 are compared with each other. The comparison result (>, =, <) is
stored in D.

4.

If S1 or S2 is an designated constant K or H, the instruction will convert the constant into a binary floating point
value before the comparison.

Program Example:
1.

Designated device M10 and M10 ~ M12 are automatically occupied.

2.

When X0 = On. DECMP instruction will be executed and one of M10 ~ M12 will be On. When X0 = Off, DECMP
instruction will not be executed and M10 ~ M12 will remain their status before X0 = Off.

3.

To obtain results ≧, ≦, ≠, serial-parallel M10 ~ M12.

4.

Use RST or ZRST instruction to clear the result.
X0
DECMP
M10
M11

D0

D100

M10

On when (D1,D0)>(D101,D100)
On when (D1,D0)=(D101,D100)

M12
On when (D1,D0)<(D101,D100)

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-21

8 Application Instructions API 100-149
API

Mnemonic

111

D

EZCP

Type

Function
Floating Point Zone Compare

P

Bit Devices
X

OP

Operands

Word Devices

Y

M

S

*

*

*

S1
S2
S
D

K
*
*
*

H KnX KnY KnM KnS T
*
*
*

Program Steps
C

D
*
*
*

E

F DEZCP, DEZCPP: 17 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Lower bound of binary floating point
comparison result

S2: Upper bound of binary floating point

S: Binary floating point

D: Comparison result

Explanations:
1.

D occupied 3 consecutive devices.

2.

S1 ≤ S2. See the specifications of each model for their range of use.

3.

S is compared with S1 and S2 and the result (>, =, <) is stored in D.

4.

If S1 or S2 is andesignated constant K or H, the instruction will convert the constant into a binary floating point
value before the comparison.

5.

When S1 > S2, S1 will be used as upper/lower bound for the comparison.

Program Example:
1.

Designated device M0 and M0 ~ M2 are automatically occupied.

2.

When X0 = On. DEZCP instruction will be executed and one of M0 ~ M2 will be On. When X0 = Off, EZCP
instruction will not be executed and M0 ~ M2 will remain their status before X0 = Off.

3.

Use RST or ZRST instruction to clear the result.
X0
DEZCP

D0

D10

D20

M0

M0
On when (D1,D0) > (D21, D20)
M1

On when (D1,D0) < (D21, D20) < (D11, D10)

M2
On when (D21, D20) > (D11, D10)

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-22

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

112

D

MOVR

Type

Function
Move Floating Point Data

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

S
D

*

*

*

PULSE

*

Program Steps
C

D

*

*

E

F DMOVR, DMOVRP: 9 steps

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S:Source floating point data

D:Destination device

Explanations:
1.

S can only be in floating point (FX.XX).

2.

See the specifications of each model for their range of use.

3.

This instruction is able to enter floating point values directly in S.

4.

When the instruction is executed, the content in S is moved directly into D. When the instruction is not executed,
the content in D will not be modified.

Program Example:
1.

User DMOVR instruction to move 32-bit floating point data.

2.

When X0 = Off, the content in (D11、D10) remains unchanged. When X0 = On, the present value
F1.20000004768372 will be moved to data registers (D11, D10).
X0
DMOVR F1.20000004768372

D10

Remarks:
This instruction only supports ES V6.1, SA/SX_V1.1, SV_V1.2, EH_V1.2, EH2/SV/EH3/SV2_V1.0 and above
versions.

DVP-PLC Application Manual

8-23

8 Application Instructions API 100-149
API

Mnemonic

116

D

RAD

Type

P

Function
Angle

Bit Devices
X

OP

Operands

Y

M

Radian

Word Devices
S

K
*

S
D

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DRAD, DRADP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source (angle)

D: Result (radian)

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

Radian = degree × (π/180)

4.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

5.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

6.

If the result = 0, the zero flag M1020 = On.

Program Example:
When X0 = On, designate the degree of binary floating point (D1, D0). Convert the angle into radian and store the
result in binary floating point in (D11, D10).
X0
DRAD

D0

D1

D0

D 11

D 10

D10

Angle
binary floating point
Radian ( degree X π / 180)
binary floating point

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-24

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

117

D

DEG

Type

P

Function
Radian

Bit Devices
X

OP

Operands

Y

M

Angle

Word Devices
S

K
*

S
D

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DDEG, DDEGP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source (radian)

D: Result (angle)

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

Degree = radian × (180/π)

4.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

5.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

6.

If the result = 0, the zero flag M1020 = On.

Program Example:
When X0 = On, designate the angle of binary floating point (D1, D0). Convert the radian into angle and store the
result in binary floating point in (D11, D10).
X0
DDEG

D0

D1

D0

D 11

D 10

D10

Radian
binary floating point
Angle (radian X 180/π )
binary floating point

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-25

8 Application Instructions API 100-149
API

Mnemonic

118

D

EBCD

Type

Function

P

Float to Scientific Conversion

Bit Devices

Word Devices

X

OP

Operands

Y

M

S

K

H KnX KnY KnM KnS T

Program Steps
C

S
D

D
*
*

E

F DEBCD, DEBCDP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source

D: Result

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

This instruction converts binary floating point value in the register designated by S into decimal floating point
value and stores it in the register designated by D.

4.

PLC conducts floating point operation in binary format. DEBCD instruction is exclusively for converting floating
points from binary to decimal.

5.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

6.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

7.

If the result = 0, the zero flag M1020 = On.

Program Example:
When X0 = On, the binary floating points in D1 and D0 will be converted into decimal floating points and stored in D3
and D2.
X0
DEBCD

Binary
Floating Point

D1

D0

D0

D2

32 bits for real number, 8 bits for exponent
1 bit for symbol bit

Exponent Real number
Exponent
Real number [D3]
Decimal
D3
D2
[D2] * 10
Floating Point

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-26

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

119

D

EBIN

Type

Function

P

Scientific to Float Conversion

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

S
D

Program Steps
C

D
*
*

E

F DEBIN, DEBINP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source

D: Result

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flag: M1020 (zero flag)

3.

This instruction converts decimal floating point value in the register designated by S into binary floating point
value and stores it in the register designated by D.

4.

DEBIN instruction is exclusively for converting floating points from decimal to binary.

5.

Range of decimal floating point real numbers: -9.999 ~ +9,999. Range of exponants: -41 ~ +35. Range of PLC
decimal floating points: ±1,175 × 10-41 ~ ±3,402 × 10+35.

6.

If the result = 0, the zero flag M1020 = On.

Program Example 1:
When X1 = On, the decimal floating points in D1 and D0 will be converted into binary floating points and stored in D3
and D2.
X1
DEBIN

D0

D2

Exponent Real number
Exponent

Real number

Decim al
Floating P oint

D1

D0

[D1] * 10

Binary
Floating P oint

D3

D2

23 bits for real number, 8 bits for exponent
1 bit for symbol bit

[D0]

Program Example 2:
1.

Use FLT instruction (API 149) to convert BIN integer into binary floating point before performing floating point
operation. The value to be converted must be BIN integer and use DEBIN instruction to convert the floating
point into a binary one.

2.

When X0 = On, move K3,140 to D0 and K-3 to D1 to generate decimal floating point (3.14 = 3140 × 10-3).

DVP-PLC Application Manual

8-27

8 Application Instructions API 100-149
X0
MOVP

K3140

D0

K3140

D0

[D1]
-3
3140 X 10

MOVP

K-3

D1

K-3

D1

[D0]

DEBIN

D0

D2

(D1, D0)

(D3, D2)
-3

3140 X 10

Binary floating point

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-28

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

120

D

EADD

Type

Function

P

Floating Point Addition

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
D

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*

E

F DEADD, DEADDP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Summand

S2: Addend

D: Sum

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

S1 + S2 = D. The floating point value in the register designated by S1 and S2 are added up and the result is
stored in the register designated by D. The addition is conducted in binary floating point system.

4.

If S1 or S2 is an designated constant K or H, the instruction will convert the constant into a binary floating point
value before the operation.

5.

S1 and S2 can designate the same register. In this case, if the “continuous execution” instruction is in use,
during the period when the criteria contact in On, the register will be added once in every scan by pulse
execution instruction DEADDP.

6.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

7.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

8.

If the result = 0, the zero flag M1020 = On.

Program Example 1:
When X0 = On, binary floating point (D1, D0) + binary floating point (D3, D2) and the result is stored in (D11, D10).
X0
DEADD

D0

D2

D10

Program Example 2:
When X2 = On, binary floating point (D11, D10) + K1234 (automatically converted into binary floating point) and the
result is stored in (D21, D20).
X2
DEADD

D10

K1234

D20

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-29

8 Application Instructions API 100-149
API

Mnemonic

121

D

ESUB

Type

Function

P

Floating Point Subtraction

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
D

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*

E

F DESUB, DESUBP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Minuend

S2: Subtrahend

D: Remainder

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

S1 − S2 = D. The floating point value in the register designated by S2 is subtracted from the floating point value
in the register assigned by S1 and the result is stored in the register designated by D. The subtraction is
conducted in binary floating point system.

4.

If S1 or S2 is an designated constant K or H, the instruction will convert the constant into a binary floating point
value before the operation.

5.

S1 and S2 can designate the same register. In this case, if the “continuous execution” instruction is in use,
during the period when the criteria contact in On, the register will be subtracted once in every scan by pulse
execution instruction DESUBP.

6.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

7.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

8.

If the result = 0, the zero flag M1020 = On.

Program Example 1:
When X0 = On, binary floating point (D1, D0) - binary floating point (D3, D2) and the result is stored in (D11, D10).
X0
DESUB

D10

D2

D0

Program Example 2:
When X2 = On, K1234 (automatically converted into binary floating point) - binary floating point (D1, D0) and the
result is stored in (D11, D10).
X2
DESUB

K1234

D0

D10

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-30

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

122

D

EMUL

Type

Function

P

Floating Point Multiplication

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
D

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*

E

F DEMUL, DEMULP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Multiplicand

S2: Multiplicator

D: Product

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

S1 × S2 = D. The floating point value in the register assigned by S1 is multiplied with the floating point value in
the register designated by S2 and the result is stored in the register designated by D. The multiplication is
conducted in binary floating point system.

4.

If S1 or S2 is an designated constant K or H, the instruction will convert the constant into a binary floating point
value before the operation.

5.

S1 and S2 can designate the same register. In this case, if the “continuous execution” instruction is in use,
during the period when the criteria contact in On, the register will be multiplied once in every scan by pulse
execution instruction DEMULP.

6.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

7.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

8.

If the result = 0, the zero flag M1020 = On.

Program Example 1:
When X1 = On, binary floating point (D1, D0) × binary floating point (D11, D10) and the result is stored in (D21, D20).
X1
DEMUL

D0

D10

D20

Program Example 2:
When X2 = On, K1234 (automatically converted into binary floating point) × binary floating point (D1, D0) and the
result is stored in (D11, D10).
X2
DEMUL

K1234

D0

D10

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-31

8 Application Instructions API 100-149
API

Mnemonic

123

D

EDIV

Type

Function

P

Floating Point Division

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K
*
*

S1
S2
D

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*

E

F DEDIV, DEDIVP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Dividend

S2: Divisor

D: Quotient and remainder

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

S1 ÷ S2 = D. The floating point value in the register designated by S1 is divided by the floating point value in the
register assigned by S2 and the result is stored in the register designated by D. The division is conducted in
binary floating point system.

4.

If S1 or S2 is an designated constant K or H, the instruction will convert the constant into a binary floating point
value before the operation.

5.

If S2 = 0, operation error will occur, the instruction will not be executed, M1067, M1068 = On and D1067 will
recorded the error code H’0E19.

6.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

7.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

8.

If the result = 0, the zero flag M1020 = On.

Program Example 1:
When X1 = On, binary floating point (D1, D0) ÷ binary floating point (D11, D10) and the quotient is stored in (D21,
D20).
X1
DEDIV

D0

D10

D20

Program Example 2:
When X2 = On, binary floating point (D1, D0) ÷ K1234 (automatically converted into binary floating point) and the
result is stored in (D11, D10).
X2
DEDIV

D0

K1234

D10

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-32

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

124

D

EXP

Type

P

Function
Exponent of Binary Floating Point

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
D

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DEXP, DEXPP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Device for operation source

D: Device for operation result

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

e = 2.71828 as the base and S as exponent for EXP operation: EXP[D +1, D]=[S +1, S]

4.

Both positive and negative values are valid for S. When designating D registers, the data should be 32-bit and
the operation should be performed in floating point system. Therefore, S should be converted into a floating
point value.

5.

The content in D = eS; e = 2.71828, S = designated source data

6.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

7.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

8.

If the result = 0, the zero flag M1020 = On.

Program Example:
1.

When M0 = On, convert (D1, D0) into binary floating point and store it in register (D11, D10).

2.

When M1= On, use (D11, D10) as the exponent for EXP operation and store the binary floating point result in
register (D21, D20).

3.

When M2 = On, convert the binary floating point (D21, D20) into decimal floating point (D30 × 10[D31]) and store
it in register (D31, D30).
M0
RST

M1081

DFLT

D0

D10

DEXP

D10

D20

DEBCD

D20

D30

M1
M2

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-33

8 Application Instructions API 100-149
API

Mnemonic

125

D

LN

Type

Function

P

Natural Logarithm of Binary Floating Point

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
D

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DLN, DLNP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Device for operation source

D: Device for operation result

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

This instruction performs natural logarithm “LN” operation by S: LN[S + 1, S]=[D + 1, D]

4.

Only positive values are valid for S. When designating D registers, the data should be 32-bit and the operation
should be performed in floating point system. Therefore, S should be converted into a floating point value.

5.

eD = S .The content in D = lnS; S = designated source data.

6.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

7.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

8.

If the result = 0, the zero flag M1020 = On.

Program Example:
1.

When M0 = On, convert (D1, D0) into binary floating point and store it in register (D11, D10).

2.

When M1= On, use register (D11, D10) as the real number for LN operation and store the binary floating point
result in register (D21, D20).

3.

When M2 = On, convert the binary floating point (D21, D20) into decimal floating point (D30 × 10[D31]) and store
it in register (D31, D30).
M0
RST

M1081

DFLT

D0

D10

DLN

D10

D20

DEBCD

D20

D30

M1
M2

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-34

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

126

D

LOG

Type

Function
Logarithm of Binary Floating Point

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
D

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*

E

F DLOG, DLOGP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Device for base

S2: Device for operation source

D: Device for operation result

Explanations:
1. See the specifications of each model for their range of use.
2. Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)
3. This instruction performs “log” operation of the content in S1 and S2 and stores the result in D.
4. Only positives are valid for the content in S1 and S2. When designating D registers, the data should be 32-bit
and the operation should be performed in floating point system. Therefore, S1 and S2 should be converted into
floating point values.
5. S1D = S2, D = ?

LogS1S2 = D

Example: Assume S1 = 5, S2 = 125, D = log5125 = ?
S1D = S2

5D = 125

D = log5125 = 3

6. If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.
7. If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.
8. If the result = 0, the zero flag M1020 = On.
Program Example:
1.

When M0 = On, convert (D1, D0) and (D3, D2) into binary floating points and store them in the 32-bit registers
(D11, D10) and (D13, D12).

2.

When M1= On, perform log operation on the binary floting points in 32-bit registers (D11, D10) and (D13, D12)
and store the result in the 32-bit register (D21, D20).

3.

When M2 = On, convert the binary floating point (D21, D20) into decimal floating point (D30 × 10[D31]) and store
it in register (D31, D30).
M0
RST

M1081

DFLT

D0

D10

DFLT

D2

D12

DLOG

D10

D12

M1
D20

M2
DEBCD

D20

D30

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-35

8 Application Instructions API 100-149
API

Mnemonic

127

D

Function

P

Floating Point Square Root

Bit Devices

Word Devices

ESQR

Type
X

OP

Operands

Y

M

S

S
D

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DESQR, DESQRP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device

D: Operation result

Explanations:
1.

Range of S: ≥ 0

2.

See the specifications of each model for their range of use.

3.

Flags: M1020 (zero flag); M1067 (operation error)

4.

This instruction performs a square root operation on the content in the register designated by S and stores the
result in the register designated by D. The square root operation is performed in floating point system.

5.

If S is an designated constant K or H, the instruction will convert the constant into a binary floating point value
before the operation.

6.

If the result of the operation = 0, the zero flag M1020 = On.

7.

S can only be a positive value. Performing any square root operation on a negative value will result in an
“operation error” and this instruction will not be executed. M1067 and M1068 will be On and D1067 will record
the error code H’0E1B.

Program Example 1:
When M0 = On, calculate the square root of the binary floating point (D1, D0) and store the result in register (D11,
D10).
X0
DESQR

D0

D10

(D11 , D10)

(D1, D0)
binary floating point

binary floating point

Program Example 2:
When M2 = On, calculate the square root of K1,234 (automatically converted into binary floating point) and store the
result in register (D11, D10).
X2
DESQR

K1234

D10

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-36

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

128

D

POW

Type

Function
Floating Point Power Operation

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K
*
*

S1
S2
D

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*

E

F DPOW, DPOWP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Device for base.

S2: Device for exponent.

D: Device for operation result

Explanations:
1.

See the specifications of each model for their range of use.

2.

This instruction performs power multiplication of binary floating point S1 and S2 and stores the result in D.
D = POW[S1 + 1, S1]^[S2 + 1, S2]

3.

Only positives are valid for the content in S1. Both positives and negatives are valid for the content in S2. When
designating D registers, the data should be 32-bit and the operation should be performed in floating point
system. Therefore, S1 and S2 should be converted into floating point values.
Example: When S1S2 = D, D = ?
Assume S1 = 5, S2 = 3, D = 53 =125

4.

If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.

5.

If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.

6.

If the result = 0, the zero flag M1020 = On.

Program Example:
1.

When M0 = On, convert (D1, D0) and (D3, D2) into binary floating points and store them in the 32-bit registers
(D11, D10) and (D13, D12).

2.

When M1= On, perform POW operation on the binary floting points in 32-bit registers (D11, D10) and (D13,
D12) and store the result in the 32-bit register (D21, D20).

3.

When M2 = On, convert the binary floating point (D21, D20) into decimal floating point (D30 × 10[D31]) and store
it in register (D31, D30).
M0
RST

M1081

DFLT

D0

D10

DFLT

D2

D12

DPOW

D10

D12

M1
D20

M2
DEBCD

D20

D30

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-37

8 Application Instructions API 100-149
API

Mnemonic

129

D

INT

Type

Y

Function
Float to Integer

P

Bit Devices
X

OP

Operands

M

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

S
D

D
*
*

E

F INT, INTP: 5 steps
DINT, DINTP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device

D: Converted result

Explanations:
1.

S occupies 2 consecutive devices. See the specifications of each model for their range of use.

2.

Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)

3.

The binary floating point value of the register designated by S is converted to BIN integer and stored in the
register designated by D. The decimal of BIN integer is left out.

4.

This instruction is the inverse operation of API 49 FLT instruction.

5.

If the converstion result = 0, the zero flag M1020 = On
If there is any decimal left out, the borrow flag M1021 = On.
If the result exceeds the range listed below, the carry flag M1022 = On.
16-bit instruction: -32,768 ~ 32,767
32-bit instruction: -2,147,483,648 ~ 2,147,483,647

Program Example:
1.

When X0 = On, the binary floating point (D1, D0) will be converted into BIN integer and the result will be stored
in (D10). The decimal of BIN integer will be left out.

2.

When X1 = On, the binary floating point (D21, D20) will be converted into BIN integer and the result will be
stored in (D31, D30). The decimal of BIN integer will be left out.
X0
INT

D0

D10

DINT

D20

D30

X1

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-38

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

130

D

Operands

SIN

Type

Function
Sine

P

Bit Devices
X

OP

Y

M

Word Devices
S

K
*

S
D

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DSIN, DSINP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source value

D: SIN result

Explanations:
1.

0° ≤ S < 360°. See the specifications of each model for their range of use.

2.

Flags: M1018 (angle or radian); M1020 (zero flag)

3.

S can be an angle or radian, decided by M1018.

4.

When M1018 = Off, the program will be in radian mode and the RAD value = angle ×π/180

5.

When M1018 = On, the program will be in angle mode and the range of angle should be “0° ≤ angle < 360°”

6.

If the result = On, M1020 = On.

7.

The SIN value obtained by S is calculated and stored in the register designated by D. The figure below offers
the relation between radian and the result.
R

S: Radian
R: Result (SIN value)

1

-2

- 32

-2

-2

0

3
2

2

2

S

-1

Program Example 1:
When M1018 = Off, the program is in radian mode. When X0 = On, use the RAD value of binary floating point (D1, D0)
and obtain its SIN value. The binary floating point result will be stored in (D11, D10).
M1002
RST

M1018

DSIN

D0

X0
D10

D1

D0

RAD value (angle x
binary floating point

D11

D10

SIN value
binary floating point

/ 180)

Program Example 2:
When M1018 = Off, the program is in radian mode. Input terminals X0 and X1 select the angle. The angles are
converted into RAD value for calculating the SIN value.

DVP-PLC Application Manual

8-39

8 Application Instructions API 100-149
X0
MOVP

K30

D10

(K30

D10)

MOVP

K60

D10

(K60

D10)

FLT

D10

D14

(D10

D15, D14) binary floating point

X1
M1000

DEDIV K31415926 K1800000000
DEMUL

D14

D20

DSIN

D40

D50

D40

D20

(

/180)

binary
floating point

(D21, D20)
binary
floating point

(D15, D14) angle x /180
(D41, D40) RAD binary floating point

(D41, D40) RAD

(D51, D50) SIN
binary floating point

Program Example 3:
When M1018 = On, the program is in angle mode. When X0 = On, use the angle of (D1, D0) to obtain SIN value and
store the binary floating point result in (D11, D10). (0° ≤ angle < 360°)
M1002
SET

M1018

DSIN

D0

X0

D1

D0

D 11

D 10

D10

angle value
SIN value
(binary floating point)

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-40

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

131

D

COS

Type

Operands

Function
Cosine

P

Bit Devices
X

OP

Y

M

Word Devices
S

K
*

S
D

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DCOS, DCOSP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source value

D: COS result

Explanations:
1. 0° ≤ S < 360°. See the specifications of each model for their range of use.
2. Flags: M1018 (angle or radian); M1020 (zero flag)
3. S can be an angle or radian, decided by M1018.
4. When M1018 = Off, the program will be in radian mode and the RAD value = angle ×π/180
5. When M1018 = On, the program will be in angle mode and the range of angle should be “0° ≤ angle < 360°”
6. If the result = On, M1020 = On.
7. The COS value obtained by S is calculated and stored in the register designated by D. The figure below offers
the relation between radian and the result.
R

S: Radian
R: Result (COS value)

1

-2

- 32

-2

-2

0

3
2

2

2

S

-1

8. Switch between radian and angle by M1018: When M1018 = Off, S will be a RAD value; when M1018 = On, S
will be an angle (0° ~ 360°).
Program Example 1:
When M1018 = Off, the program is in radian mode. When X0 = On, use the RAD value of binary floating point (D1, D0)
and obtain its COS value. The binary floating point result will be stored in (D11, D10).
M1002
RST

M1018

DCOS

D0

X0
D10

D1

D0

RAD value (angle x
binary floating point

D11

D10

COS value
binary floating point

DVP-PLC Application Manual

/180)

8-41

8 Application Instructions API 100-149
Program Example 2:
When M1018 = On, the program is in angle mode. When X0 = On, use the angle of (D1, D0) to obtain COS value and
store the binary floating point result in (D11, D10). (0° ≤ angle < 360°)
M1002
SET

M1018

DCOS

D0

X0

D1

D0

D11

D 10

D10

angle value

COS value
(binary floating point)

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-42

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

132

D

TAN

Type

Operands

Function
Tangent

P

Bit Devices
X

OP

Y

M

Word Devices
S

K
*

S
D

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DTAN, DTANP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source value

D: TAN result

Explanations:
1. 0° ≤ S < 360°. See the specifications of each model for their range of use.
2. Flags: M1018 (angle or radian); M1020 (zero flag)
3. S can be an angle or radian, decided by M1018.
4. When M1018 = Off, the program will be in radian mode and the RAD value = angle ×π/180
5. When M1018 = On, the program will be in angle mode and the range of angle should be “0° ≤ angle < 360°”
6. If the result = On, M1020 = On.
7. The TAN value obtained by S is calculated and stored in the register designated by D. The figure below offers
the relation between radian and the result.
R

-2
-2

- 32

-

S: Radian
R: Result (TAN value)

2
0
-1 1

2

S

3
2

Program Example 1:
When M1018 = Off, the program is in radian mode. When X0 = On, use the RAD value of binary floating point (D1, D0)
and obtain its TAN value. The binary floating point result will be stored in (D11, D10).
M1002
RST

M1018

DTAN

D0

X0
D10

D1

D0

RAD value (angle x
binary floating point

D11

D10

TAN value
binary floating point

/180)

Program Example 2:

DVP-PLC Application Manual

8-43

8 Application Instructions API 100-149
When M1018 = On, the program is in angle mode. When X0 = On, use the angle of (D1, D0) to obtain TAN value and
store the binary floating point result in (D11, D10). (0° ≤ angle < 360°)
M1002
SET

M1018

DTAN

D0

X0

D1

D0

D 11

D 10

D10

angle value

TAN value
(binary floating point)

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-44

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

133

D

ASIN

Type

Function
Arc Sine

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K
*

S
D

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DASIN, DASINP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source value (binary floating point)

D: ASIN result

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flag: M1020 (zero flag)

3.

ASIN value=sin–1. The figure below offers the relation between the entered sin value and the result.
R

S: Entered data (sine value)
R: ASIN value (radian)

2

-1,0

0

S

1,0

-2

4.

The decimal floating point of the SIN value designated by S should be within -1.0 ~ +1.0. If the value falls without
the range, M1067 and M1068 will be On without performing any action.

5.

If the result = 0, M1020 = On.

Program Example:
When X0 = On, obtain the ASIN value of binary floating point (D1, D0) and store the binary floating point result in (D11,
D10).
X0
D0

DASIN

D10

D1

D0

binary floating point

D11

D10

ASIN value
binary floating point

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-45

8 Application Instructions API 100-149
API

Mnemonic

134

D

ACOS

Type

Operands

Function
Arc Cosine

P

Bit Devices
X

OP

Y

M

Word Devices
S

K
*

S
D

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DACOS, DACOSP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source value (binary floating point)

D: ACOS result

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flag: M1020 (zero flag)

3.

ACOS value=cos–1. The figure below offers the relation between the entered cos value and the result.
R

S: Entered data (cosine value)
R: ACOS value (radian)

2

0

-1,0

4.

S

1,0

The decimal floating point of the COS value designated by S should be within -1.0 ~ +1.0. If the value falls
without the range, M1067 and M1068 will be On without performing any action.

5.

If the result = 0, M1020 = On.

Program Example:
When X0 = On, obtain the ACOS value of binary floating point (D1, D0) and store the binary floating point result in
(D11, D10).
X0
DACOS

D0

D10

D1

D0

binary floating point

D11

D10

ACOS value
binary floating point

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-46

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

135

D

ATAN

Type

Function
Arc Tangent

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K
*

S
D

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DATAN, DATANP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source value (binary floating point)

D: ATAN value

Explanations:
1.

See the specifications of each model for their range of use.

2.

Flag: M1020 (zero flag)

3.

ATAN value=tan–1. The figure below offers the relation between the entered tan value and the result.
R

S: Entered data (tangent value)
R: ATAN value (radian)

2

S

0

-2

4.

If the result =0, M1020 = On.

Program Example:
When X0 = On, obtain the ATAN value of binary floating point (D1, D0) and store the binary floating point result in
(D11, D10).
X0
DATAN

D0

D10

D1

D0

binary floating point

D11

D10

ATAN value
binary floating point

Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-47

8 Application Instructions API 100-149
API

Mnemonic

136

D

SINH

Type

Function
Hyperbolic Sine

P

Bit Devices
X

OP

Operands

Y

M

S
D

Word devices
S

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DSINH, DSINHP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source value (binary floating point)

D: SINH value

Explanations:
1. See the specifications of each model for their range of use.
2. Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)
3. SINH value=(es-e-s)/2. The result is stored in D.
Program Example:
1. When X0 = On, obtain the SINH value of binary floating point (D1, D0) and store the binary floating point result in
(D11, D10).
X0
DSINH

D0

D10

D1

D0

binary floating point

D11

D10

SINH value
binary floating point

2. If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.
3. If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.
4. If the result = 0, the zero flag M1020 = On.
Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-48

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

137

D

COSH

Type

Function
Hyperbolic Cosine

P

Bit Devices
X

OP

Operands

Y

M

Word devices
S

S
D

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DCOSH, DCOSHP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source value (binary floating point)

D: COSH value

Explanations:
1. See the specifications of each model for their range of use.
2. Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)
3. COSH value=(es+e-s)/2. The result is stored in D.
Program Example:
1. When X0 = On, obtain the COSH value of binary floating point (D1, D0) and store the binary floating point result in
(D11, D10).
X0
DCOSH

D0

D10

D1

D0

binary floating point

D11

D10

COSH value
binary floating point

5. If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.
6. If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.
7. If the result = 0, the zero flag M1020 = On.
Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

DVP-PLC Application Manual

8-49

8 Application Instructions API 100-149
API

Mnemonic

138

D

TANH

Type

Function
Hyperbolic Tangent

P

Bit Devices
X

OP

Operands

Y

M

S
D

Word devices
S

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DTANH, DTANHP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source value (binary floating point)

D: TANH result

Explanations:
1. See the specifications of each model for their range of use.
2. Flags: M1020 (zero flag); M1021 (borrow flag); M1022 (carry flag)
3. TANH value=(es-e-s)/(es+e-s) . The result is stored in D.
Program Example:
1. When X0 = On, obtain the TANH value of binary floating point (D1, D0) and store the binary floating point result in
(D11, D10).
X0
DTANH

D0

D10

D1

D0

binary floating point

D11

D10

TANH value
binary floating point

2. If the absolute value of the result > maximum floating point available, the carry flag M1022 = On.
3. If the absolute value of the result < minimum floating point available, the borrow flag M1021 = On.
4. If the result = 0, the zero flag M1020 = On.
Remarks:
For floating point operations, see “5.3 Handling of Numeric Values”.

8-50

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

143

DELAY

Type

Operands
Delay Instruction

Bit Devices
X

OP

Function

Y

M

Word Devices
S

S

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*

E

F DELAY, DELAYP: 3 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: delay time (unit: 0.1ms)
Explanations:
1.

Range of S: K1 ~ K1,000. See the specifications of each model for their range of use.

2.

After DELAY instruction is executed, the program after DELAY in every scan period will execute delay outputs
according to the delay time designated by the user.

Program Example:
When X0 goes from Off to On and generates an external interruption, the interruption subroutine will execute DELAY
for 2ms before executing the next step, X1 = On and Y0 = On.
EI
Main Program
FEND
I001

M1000
DELAY

K20

X1
Y0
REF

Y0

K8

IRET
END

Interrupt input X0
Input X1
Output Y0
T=2ms

Remarks:
1.

User can define the delay time based on their needs.

2.

The delay time may increase due do the influences from communication, high-speed counters and high-speed
pulse output instructions.

3.

The delay time of designated external output (transistor or relay) will increase due to the delay on the transistor

DVP-PLC Application Manual

8-51

8 Application Instructions API 100-149
or relay itself. See 2.3 for more information.

8-52

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

144

GPWM

Type

Function
General PWM Output

Bit Devices
X

OP

Operands

Word Devices

Y

M

S

*

*

*

S1
S2
D

K

H KnX KnY KnM KnS T

Program Steps
C

D
*
*

E

F GPWM: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Width of output pulse

S2: Pulse output cycle

D: Pulse output device

Explanations:
1.

S2 occupies 3 consecutive devices.

2.

S1 ≤ S2. See the specifications of each model for their range of use.

3.

Range of S1: t = 0 ~ 32,767ms.

4.

Range of S2: t = 1 ~ 32,767ms.

5.

S2 +1 and S2 +2 are parameters for the system. Do not occupy them.

6.

Pulse output devices D: Y, M, S.

7.

When being executed, GPWM instruction designates S1 and S2 and that pulses output will be from device D.

8.

When S1 ≤ 0, there will be no pulse output. When S1 ≥ S2, the pulse output device will keep being On.

9.

S1 and S2 can be modified when GPWM instruction is being executed.

Program Example:
When X0 = On, D0 = K1,000, D2 = K2,000, and Y10 will output the pulse illustrated below. When X0 = Off, Y10 output
will be Off.
X0
GPWM

t

T

D0

D2

Y10

t=1000ms

Output Y10

T=2000ms

Explanations:
1.

This instruction counts by the scan cycle; therefore the maximum offset will be one PLC scan cycle. S1, S2 and
(S2 - S1) should > PLC scan cycle; otherwise, errors will occur during GPWM outputs.

2.

Please note that placing this instruction in a subroutine or interruption will cause inaccurate GPWM outputs.

DVP-PLC Application Manual

8-53

8 Application Instructions API 100-149
API

Mnemonic

145

FTC

Type

Function
Fuzzy Temperature Control

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
S3
D

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*
*

E

F FTC: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Set value (SV)

S2: Present value (PV)

S3: Parameter (sampling time)

D: Output value (MV)

Explanations:
1.

Range of S1 : 1 ~ 5000 (shown as 0.1°C ~ 500°C). Unit: 0.1°. If (S3 +1) is set as K0, the range will be 0.1°C ~
500°C.

2.

Range of S2 : 1 ~ 5000 (shown as 0.1°C ~ 500°C). Unit: 0.1°. If (S3 +1) is set as bit0 = 0, the range will be 0.1°C
~ 500°C. Therefore, when the user obtain an A/D value from the temperature sensor, the value has to be
converted into a value between 1 ~ 5,000 by four arithmetic operation instructions.

3.

If S3 < K1, the instruction will not be executed. If S3 > K200, S3 will adopt K200. S3 will occupy 7 consecutive
devices.

4.

See the specifications of each model for their range of use.

5.

Settings of parameter S3 +1: bit0 = 0 ->°C; bit1 = 0 ->°F; bit1 = 0 -> no filter function; bit1 = 1 -> with filter
function; bit2 ~ bit5 -> 4 kinds of heating environments; bit6 ~ bit15 -> reserved. See remarks for more
information.

6.

D is the value between 0 ~ sampling time × 100. When using this instruction, the user has to adopt other
instructions according to the types of the heater. For example, FTC can be used with GPWM for output pulse
control. “Sampling time × 100” is the cycle of GPWM pulse output; MV is the width of GPWM pulse. See
program example 1.

7.

There is no limit on the times of using FTC instruction, but Do not repeatedly use a designated operand in case
an error may occur..

Program Example:
1.

Set up the parameter before executing FTC instruction.

2.

When X0 = On, the instruction will be executed and and result will be stored in D150. When X0 = Off, the
instruction will not be executed and the previous data remain unchanged.
X0
FTC

8-54

D0

D1

D100

D150

DVP-PLC Application Manual

8 Application Instructions API 100-149
Remarks:
1.

Setting of S3:
Device No.

Function

Range

Explanation
If TS is less than a scan time, PID

Sampling time (TS)

1 ~ 200

(unit: 100ms)

(unit: 100ms)

instruction will be executed for a
scan time. If TS= 0, PID instruction
will not be enabled. The minimum TS
must be greater than a scan time.

b0 =0 means oC
o

b0 =1 means F
b1=0 means
without fileter

+1

When the value exceeds the upper
bound, use upper bound.
When without filter function, PV =
currently measured value. When with

b0: temperature unit

function

b1: filter function

b1=1 means with

b2 ~ b5: heating

filter function

environnment

b2=1

Slow heating environment

b3=1

General heating environment

b4=1

Fast heating environment

b5=1

High-speed heating environment

filter function, PV = (currently
measured value + previous PV)/2

b6 ~ b15: reserved

+2

~

Parameters for system use only. Do not use them.

+6
2.

Control Diagram:
FTC

SV

+

e

Fuzzy
Controller

MV

PV
Temperature
Sensor

3.

Notes and suggestion:
It is recommended that the sampling time be set to 2 times more than the sampling time of the temperature
sensor for better temperature control.
bit2 ~ bit5 of S3+1 are for the control speed. If the user does not set up the parameter, FTC will automatically
activate “general heating environment”. When the user finds that the control is too slow to reach SV, select “slow

DVP-PLC Application Manual

8-55

8 Application Instructions API 100-149
heating environment” to enhance the speed to reach SV. On the contrary, when the user finds that the control is
too fast or with too many fluctuations, select “fast heating environment” to slow down the control speed.
When bit2 ~ bit5 of S3+1 are all set as 1 or more than 1 environments are designated, FTC instruction will check
from bit2 to bit 5 in order and enable the function that has been set as 1. The parameter can be modified during
the control.
4.

Example 1: control diagram
FTC
+

SV
D10

e

Fuzzy
Controller

MV
D22

GPWM Program

Y0

PV D11
Temperature
Sensor

PT Module

Output D22 (MV) of FTC instruction is the input D22 of GPWM instruction, as the duty cycle of ajustable pulses.
D30 is the fixed cycle time of pulses. See below for the timing diagram of Y0 output.
D22

Y0

D30

Assume parameter settings: D10 = K1,500 (target temperature), D12 = K60 (sampling time: 6 secs.), D13 = K8
(bit3=1), D30 = K6,000 (=D12*100)
The example control program is indicated as:
M1002

M1

M1013

MOV

K1500

D10

TO

K0

K2

K2

K1

FROM

K0

K6

D11

K1

MOV

K60

D12

MOV

K8

D13

MOV

K6000

D30

SET

M1

FTC

D10

D11

D12

D22

GPWM

D22

D30

Y0

FROM

K0

K6

D11

K1

END

8-56

DVP-PLC Application Manual

8 Application Instructions API 100-149
Experiment in an oven which can be heated up to 250°C. See below for the records of target and present
temperatures. As shown in the diagram below, we can see that after 48 minutes, the temperature is able to
reach the target temperature with ± 1oC inaccuracy and exceed approx. 10°C of the target temperature.

Example 2: Due to that the temperature once exceeds the target temperature, we modify the heating
environment into “fast heating environment” (D13 = K16). The results are shown in the diagram below.
From the diagram below, we see that though the temperature no longer exceeds the target temperature, it still
needs to take more than 1 hour and 15 minutes to reach the target temperature with ± 1oC inaccuracy. It seems
that we have chosen the right environment, but the sampling time is too long, resulting in the extension of
heating time.

DVP-PLC Application Manual

8-57

8 Application Instructions API 100-149
Example 3: To speed up the speed to reach the target temperature, we correct the sampling time as 4 seconds
(D12 = K40, D30 = K4,000). The results are shown in the diagram below.
From the diagram below, we see that the overall control time has been shortened as 37 minutes. Therefore, we
find out that modifying the sampling time can speed up the time for reaching the target temperature.

Example 4: To see if we can reach the target temperature faster, we modify the sampling time frim example 3
into 2 seconds (D12 = K20, D30 = K2,000). The results are shown in the diagram below.
From the diagram below, we see that the sampling time that is too short will cause the control system to become
too sensitive and lead to up and down fluctuations.

8-58

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

146

CVM

Type

Operands

Function
Valve Control

Bit Devices
X

OP
S1
S2
D

Y

*

M

*

Word Devices
S

K

H KnX KnY KnM KnS T

*

*

Program Steps
C

D

E

F CVM: 7 steps

*
*

*
PULSE

ES EX SS SA SX SC EH SV

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Target time of valve (absolute position)

S2: Time from fully-closed to fully-open of valve (destination)

D: Output device
Explanations:
1.

S1 occupies 3 consecutive registers when in use. S1 + 0 are for the user to store the designated value; S1 + 1 (the
current position of the valve) and S1 + 2 are for storing the parameters recorded in the instruction and please DO
NOT use and alter these two registers.

2.

D occupies 2 consecutive output devices when in use. D + 0 is the “open” contact and D + 1 is the “close” contact.

3.

This instruction only supports EH2/SV/EH3/SV2 and does not support EH.

4.

The unit of time: 0.1 second. When the scan time of the program exceeds 0.1 second, DO NOT use this
instruction to adjust the position of the valve.

5.

Frequency of the output device: 10Hz.

6.

When the time of S1 + 0 > the fully-opened time set in S2, D + 0 will keep being On and D + 1 being Off. When
the time of S1 + 0 < 0, D + 0 will keep being Off and D + 1 being On.

7.

When the instruction is enabled, the instruction will start to control the valve from “0” time position. Therefore, if
the user cannot be sure whether the valve is at “0” before executing the instruction, please designate S1 + 0 as
less than 0 and execute the instruction for S2 (time) before sending in the correct target control time.

Program Example 1:
1. The control valve

Fully-closed

Fully-open

Y1

Y0

2. Definitions of the control valve:

DVP-PLC Application Manual

8-59

8 Application Instructions API 100-149
a) When Y0 and Y1 = Off: No valve action

8-60

DVP-PLC Application Manual

8 Application Instructions API 100-149
b) When Y0 = On and Y1 = Off: Valve “open”
c) When Y0 = Off and Y1 = On: Valve “closed”
d) When Y0 and Y1 = On: The action is prohibited.
3. Timing diagram and program of the control:
5
M0

Y0

4sec

1sec

Y1
1
D0=k40

2sec

2sec

2
D0=k20

3
4
D0=k30 D0=k10

M0
CVM

D0

K50

Y0

4. Control phases:
1)

Phase 1: When M0 = On, D0 = K40 refers to the valve shall be open (Y0 = On, Y1 = Off) till the position of
4 seconds.

2)

Phase 2: Change the position of the valve and D0 = K20. Due to that the previous position was at 4
seconds, the valve shall be closed (Y0 = Off, Y1 = On) for 2 seconds, moving the valve to the position of 2
seconds.

3)

Phase 3: Change the position of the valve and D0 = K30. Due to that the previous position was at 2
seconds, the valve shall be open (Y0 = On, Y1 = Off) for 1 second, moving the valve to the position of 3
seconds.

4)

Phase 4: Change the position of the valve and D0 = K10. Due to that the previous position was at 2
seconds, the valve shall be closed (Y0 = Off, Y1 = On) for 2 seconds, moving the valve to the position of 1
second.

5)

Phase 5: Switch off X0 and no actions at the valve (Y0 = Off, Y1 = Off).

Program Example 2:
1. Timing diagram and program of the control:
M0

T0
Y0

4sec

Y1

5sec

2sec

1

2

3

D0=1

D0=k40

D0=k10

DVP-PLC Application Manual

4

8-61

8 Application Instructions API 100-149
M0
TMR

T0

K50

MOV

k-1

D0

CVM

D0

K50

T0

Y0

2. Control phases:
1)

Phase 1: When M0 = On, due to that we are not sure about there the valve is, set D0 = K-1 to deliberately
close the valve (Y0 = Off, Y1 = On) for 5 seconds and make sure the valve is at the position of 0 second
before moving on to the next step.

2)

Phase 2: When T0 = On, allow D0 = K40 to start is action. Open the valve (Y0 = On, Y1 = Off) for 4
seconds, moving the valve to the position of 4 seconds.

3)

Phase 3: Change the position of the valve and D0 = K10. Due to that the previous position was at 4
seconds, the valve shall be closed (Y0 = Off, Y1 = On) for 3 seconds, moving the valve to the position of 1
second.

4)

8-62

Phase 4: Switch off M0 and the valve will no longer move (Y0 = Off, Y1 = Off).

DVP-PLC Application Manual

8 Application Instructions API 100-149
API

Mnemonic

147

D

SWAP

Type

Function
Byte Swap

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

S

*

*

*

PULSE

*

Program Steps
C

D

E

*

*

*

F SWAP, SWAPP: 3 steps
* DSWAP, DSWAPP: 5 steps

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Device for swapping 8 high/low byte.
Explanations:
1.

If D is used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

As 16-bit instruction: the contents in the 8 high bytes and 8 low bytes are swapped.

4.

As 32-bit instruction: the 8 high bytes and 8 low bytes in the two registers swap with each other respectively.

5.

This instruction adopts pulse execution instructions (SWAPP, DSWAPP).

Program Example 1:
When X0 = On, the high 8 bytes and low 8 bytes in D0 will swap with each other.
X0
D0

SWAPP

D0
High Byte

Low Byte

Program Example 2:
When X0 = On, the high 8 bytes and low 8 bytes in D11 will swap with each other and the high 8 bytes and low 8
bytes in D10 will swap with each other.
X0
DSWAPP

D10

D11
High Byte

Low Byte

DVP-PLC Application Manual

D10
High Byte

Low Byte

8-63

8 Application Instructions API 100-149
API

Mnemonic

148

D

MEMR

Type

Function
Read File Register

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

m
D
n

K
*

H KnX KnY KnM KnS T
*

*

*

Program Steps
C

D
*
*
*

E

F MEMR, MEMRP: 7 steps
DMEMR, DMEMRP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
m: Address in the file register to be read

D: Device for storing the read data (starting from the designated D)

n: Number of data read at a time
Explanations:
1.

Range of m: K0 ~ K1,599 (SA/SX/SC); K0 ~ K9,999 (EH/EH2/SV)

2.

Range of D: D2000 ~ D4999 (SA/SX/SC); D2000 ~ D9999 (EH/EH2/SV)

3.

Range of n: For 16-bit instruction K1 ~ K1,600 (SA/SX/SC), K1 ~ K8,000 (EH/EH2/SV); For 32-bit instruction
K1 ~ K800 (SA/SX/SC), K1 ~ K4,000 (EH/EH2/SV)

4.

See the specifications of each model for their range of use.

5.

Flag: M1101. See explanations below.

6.

SA/SX/SC/EH/EH2/SV/EH3/SV2 uses this instruction to read the data in file registers and store them into data
registers.

7.

SA/SX/SC offers 1,600 16-bit file registers.

8.

m and n of SA/SX/SC do not support E and F index register modification.

9.

EH/EH2/SV/EH3/SV2 offers 10,000 16-bit file registers.

10. If m, D and n fall without their range, operation error will occur. M1067, M1068 = On and D1067 will record the
error code H’0E1A.
Program Example 1:
1.

The 16-bit instruction MEMR reads 100 data at address 10 in the file register and store the read data in register
D starting from D2000.

2.

When X0 = On, the instruction will be executed. When X0 = Off, the instruction will not be executed and the
previously read data will remain unchanged.
X0
MEMR

K10

D2000

K100

Program Example 2:
1.

The 32-bit instruction DMEMR reads 100 data at address 20 in the file register and store the read data in
register D starting from D3000.

2.

When X0 = On, the instruction will be executed. When X0 = Off, the instruction will not be executed and the
previously read data will remain unchanged.

8-64

DVP-PLC Application Manual

8 Application Instructions API 100-149
X0
DMEMR

K20

DVP-PLC Application Manual

D3000

K100

8-65

8 Application Instructions API 100-149
API

Mnemonic

149

D

MEMW

Type

Function
Write File Register

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
m
n

K

H KnX KnY KnM KnS T

*
*

*
*

Program Steps
C

D
*
*
*

E

F MEMW, MEMWP: 7 steps
DMEMW, DMEMWP: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Device for storing the written data (starting from the designated D)

m: Address in the file register to be written

n: Number of data to be written at a time
Explanations:
1. Range of S: D2000 ~ D4999 (SA/SX/SC); D2000 ~ D9999 (EH/EH2/SV)
2. Range of m: K0 ~ K1,599 (SA/SX/SC); K0 ~ K9,999 (EH/EH2/SV)
3. Range of n: For 16-bit instruction K1 ~ K1,600 (SA/SX/SC), K1 ~ K8,000 (EH/EH2/SV); For 32-bit instruction K1
~ K800 (SA/SX/SC), K1 ~ K4,000 (EH/EH2/SV)
4. See the specifications of each model for their range of use.
5. Flag: M1101. See explanations below.
6. SA/SX/SC/EH/EH2/SV/EH3/SV2 uses this instruction to read the data in data registers and write them into file
registers.
7. SA/SX/SC offers 1,600 16-bit file registers.
8. m and n of SA/SX/SC do not suppot E and F index register modification.
9. EH/EH2/SV/EH3/SV2 offers 10,000 16-bit file registers.
10. If S, m and n fall without their range, operation error will occur. M1067, M1068 = On and D1067 will record the
error code H’0E1A.
Program Example:
1.

When X0 = On, the 32-bit instruction DMEMW writes 100 32-bit data starting from D2001 and D2000 into
address 0 ~ 199 in the file register.

2.

When X0 = On, the instruction will be executed. When X0 = Off, the instruction will not be executed and the
previously data written in will remain unchanged.
X0
DMEMW

D2000

K0

K100

File Register:
1.

EH/EH2/SV/EH3/SV2: When the PLC is powered, it will decide whether to automatically send the data in the
file register to the designated data register by M1101 (whether to enable the function of file register), D1101
(start address in file register K0 ~ K9,999), D1102 (number of data to be read in file register K1 ~ k8,000), and
D1103 (device for storing read data, starting from designated D, K2,000 ~ K9,999).

8-66

DVP-PLC Application Manual

8 Application Instructions API 100-149
2.

In EH/EH2/SV/EH3/SV2, the reading of data from file register to data register D will not be executed if D1101 <
0, D1101 > K9,999, D1103 < K2,000 or D1103 > K9,999.

3.

SA/SX/SC: When the PLC is powered, it will decide whether to automatically send the data in the file register to
the designated data register by M1101 (whether to enable the function of file register), D1101 (start address in
file register K0 ~ K1,599), D1102 (number of data to be read in file register K1 ~ k1,600), and D1103 (device for
storing read data, starting from designated D, K2,000 ~ K4,999).

4.

In SA/SX/SC, the reading of data from file register to data register D will not be executed if D1101 < 0, D1101 >
K1,599, D1103 < K2,000 or D1103 > K4,999.

5.

When the reading of data from file register to data register D starts, PLC will stop the reading if the address of
file register or data register exceed their range.

6.

In PLC program, only API 148 MEMR and API 149 MEMW can be used to read or write the file register. See
2.8.3 for more information on file registers.

7.

File registers do not have actual addresses in it. Reading and writing of file registers can only be done through
API 148 MEMR, API 149 MEMW or peripheral devices HPP and WPLSoft.

8.

If the address in the file register to be read exceeds its range, the read value will be 0.

9.

Special relays of file register and other relevant special registers:
Flag

Function

M1101

Whether to enable the function of file register; latched; default = off

Special D
D1101

D1102

Function
Start address in file register. SA/SX/SC: K0 ~ K1,599;
EH/EH2/SV/EH3/SV2: K0 ~ K9,999; latched; default = 0
Number of data to be read in file register. SA/SX/SC: K1 ~ K1,600;
EH/EH2/SV/EH3/SV2: K1 ~ K8,000; latched; default = 0
Device for storing read data, starting from designated D. SA/SX/SC:

D1103

K2,000 ~ K4,999; EH/EH2/SV/EH3/SV2: K2,000 ~ K9,999; latched;
default = 2,000

DVP-PLC Application Manual

8-67

8 Application Instructions API 100-149
MEMO

8-68

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

150

MODRW

Type

Operands

Read/Write MODBUS Data

Bit Devices
X

OP

Function

Y

M

Word Devices
S

S1
S2
S3
S
n

K

H KnX KnY KnM KnS T

*
*
*

*
*
*

*

*

Program Steps
C

D

E

F MODRW: 11 steps

*
*
*
*
*

PULSE
ES EX SS SA SX SC EH SV

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Address of communication device

S2: Function code

S: Register for storing read/written data (source or destination)

S3: Device address of data to be read/written
n: Length of read/written data

Explanations:
1.

The content of S2 shall only be: K3(H03), K6(H06), K16(H10). SA/SX V1.8, SC V1.6 and EH2/SV/EH3/SV2
V1.2 and later versions support K2(H02) and K15(H0F); EH2/SV/EH3/SV2 V1.4 and later versions support
K5(H05).

2.

ES/EX/SS V.4.9 (and above) support the continuous execution instruction (MODRW). Other versions do not
support this instruction.

3.

ES/EX/SS series MPU does not support E, F index register modification.

4.

Flags: M1120 ~ M1131, M1140 ~ M1143. See remarks for more details.

5.

Range of S1: K0 ~ K254

6.

S2: Funcation code. Only these function codes are available currently; other function codes are still not
executable. See program examples for more information.
Code

7.

Function

Applicable models

H02

Read many bit devices

SA/SX V1.8, SC V1.6 and EH2/SV/EH3/SV2 V V1.2 and

H03

Read many word devices

ES/SA/EH series MPU

H05

Write single bit device

EH2/SV/EH3/SV2 V1.4 and later versions

H06

Write single word device

ES/SA/EH series MPU

H0F

Write many bit devices

SA/SX V1.8, SC V1.6 and EH2/SV/EH3/SV2 V1.2 and later

H10

Write many word devices

ES/SA/EH series MPU

S3: Device address of data to be read/written. The device address inside the communication device. If the
address is illegal to a designated communication device, the communication device will respond with an error
message and PLC will store the error code in D1130 and M1141 = On. For example, if 8000H is illegal to
VFD-S, M1141 will be On and D1130 = 2. See user manual of VFD-S for error codes.

8.

S: Register for storing read/written data. The user sets up a register and stores the data to be written in the
register in advance. The register can be register for storing the read data.

9.

n: Length of read/written data.
In Modbus function code H05 (force On/Off), n=0: Off, n=1: On.

DVP-PLC Application Manual

9-1

9 Application Instructions API 150-199
In Modbus function code H02, H03, H0F, H10 (data length), the range = K1 ~ Km. See the table below for m
upon different models and communication modes, in which the unit of H02 and H0F is word, and bit for H03
and H10.
Communication
mode
M1143 On
(RTU Mode)
M1143 Off
(ASCII Mode)
10.

Model

H02

H03

H0F

H10

ES

Not available

K16

Not available

K16

SA

K64

K16

K64

K16

EH

K256

K16

K256

K16

ES

Not available

K8

Not available

K8

SA

K64

K8

K64

K8

EH

K256

K16

K256

K16

There is no limitation on the times of using this instruction. However, only one instruction can be executed at a
time.

Program Example 1:
1.

Function code K3(H03): For reading many data in register
When PLC is connected to VFD-S AC motor drive: M1143 = Off, in ASCII mode
When PLC is connected to VFD-S AC motor drive: M1143 = On, in RTU mode

2.

When in ASCII mode, the received data will be stored in the designated registers starting from D0 in ASCII
format and PLC will automatically convert the data into hex value and store them in special registers D1296 ~
D1311. When the conversion into hex value starts, M1131 will be On and turn Off when the conversion is
completed.

3.

If necessary, the user can move the hex values stored in D1296 ~ D1131 to other general registers by using
MOV, DMOV or BMOV instruction. Other instructions of ES/EX/SS do not function on the data in D1296 ~
D1311.

4.

When in RTU mode, the received data will be stored in the designated registers starting from D0 in hex format.

5.

When In ASCII mode or RTU mode, PLC will store the data to be sent in D1256 ~ D1295. If necessary, the
user can move the data to other general registers by using MOV, DMOV or BMOV instruction. Other
instructions of ES/EX/SS do not function on the data in D1256 ~ D1295.

6.

The data sent back from AC motor drive are stored in the registers designated by the user. After the
transmission is completed, PLC will auto-check if the received data are incorrect. M1140 will be On if there is
an error.

7.

If the device address is illegal to a designated communication device, the communication device will respond
with an error message and PLC will store the error code in D1130 and M1141 = On. For example, if 8000H is
illegal to VFD-S, M1141 will be On and D1130 = 2. See user manual of VFD-S for error codes.

8.

After M1140 = On or M1141 = On, PLC will send another correct datum to AC motor drive. If the data sent back
from AC motor drive is correct, M1140 and M1141 will be reset.

9-2

DVP-PLC Application Manual

9 Application Instructions API 150-199
M1002

X10

MOV

H87

SET

M1120

MOV

K100

M1143

D1120

Set up communication protocol 9600, 8, E, 1

Retain communication protocol
D1129

Communication time-out 100ms

RTU mode

X0
SET

M1122

MODRW

K1

Set up sending request

X0
Address of
communication
device K1

M1127

K3

H2100

D0

K6

Function Data address Register
Data length
code K3: H2100
for storing (word)
read
the data
many data

Process of received data
ASCII mode: The received data will be stored in the designated registers starting
from D0 in ASCII format and PLC will automatically convert the data into hex value
and store them in special registers D1296 ~ D1311.
RTU mode: The received data will be stored in the designated registers starting
from D0 in hex format.
RST

9.

M1127

Sending/receiving of data is completed. The flag is reset.

ASCII Mode: When PLC is connected to VFD-S AC motor drive.
PLC Ö VFD-S, PLC sends: “01 03 2100 0006 D5”
VFD-S Ö PLC, PLC receives: “01 03 0C 0100 1766 0000 0000 0136 0000 3B”
Registers for sent data (sending messages)
Register
D1256 Low
D1256 High
D1257 Low
D1257 High
D1258 Low
D1258 High
D1259 Low
D1259 High
D1260 Low
D1260 High
D1261 Low
D1261 High
D1262 Low
D1262 High

DATA
‘0’
‘1’
‘0’
‘3’
‘2’
‘1’
‘0’
‘0’
‘0’
‘0’
‘0’
‘6’
‘D’
‘5’

DVP-PLC Application Manual

30 H
31 H
30 H
33 H
32 H
31 H
30 H
30 H
30 H
30 H
30 H
36 H
44 H
35 H

Explanation
ADR 1
ADR 0
CMD 1
CMD 0

Address of AC motor drive: ADR (1,0)
Command code: CMD (1,0)

Starting Data Address

Number of Data (counted by words)
LRC CHK 1
LRC CHK 0

Error checksum: LRC CHK (0,1)

9-3

9 Application Instructions API 150-199
Registers for received data D0 (responding messages)
Register
D0 Low
D0 High
D1 Low
D1 High
D2 Low
D2 High
D3 Low
D3 High
D4 Low
D4 High
D5 Low
D5 High
D6 Low
D6 High
D7 Low
D7 High
D8 Low
D8 High
D9 Low
D9 High
D10 Low
D10 High
D11 Low
D11 High
D12 Low
D12 High
D13 Low
D13 High
D14 Low
D14 High
D15 Low
D15 High

DATA
‘0’
‘1’
‘0’
‘3’
‘0’
‘C’
‘0’
‘1’
‘0’
‘0’
‘1’
‘7’
‘6’
‘6’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘1’
‘3’
‘6’
‘0’
‘0’
‘0’
‘0’
‘3’
‘B’

Explanation

30 H
31 H
30 H
33 H
30 H
43 H
30 H
31 H
30 H
30 H
31 H
37 H
36 H
36 H
30 H
30 H
30 H
30 H
30 H
30 H
30 H
30 H
30 H
31 H
33 H
36 H
30 H
30 H
30 H
30 H
33 H
42 H

ADR 1
ADR 0
CMD 1
CMD 0
Number of Data (counted by byte)
Content of
address
2100H

PLC automatically convert ASCII codes to numerals and
store the numeral in D1296 = H0100

Content of
address
2101H

PLC automatically convert ASCII codes to numerals and
store the numeral in D1297 = H1766

Content of
address
2102H

PLC automatically convert ASCII codes to numerals and
store the numeral in D1298 = H0000

Content of
address
2103H

PLC automatically convert ASCII codes to numerals and
store the numeral in D1299 = H0000

Content of
address
2104H

PLC automatically convert ASCII codes to numerals and
store the numeral in D1300 = H0136

Content of
address
2105H

PLC automatically convert ASCII codes to numerals and
store the numeral in D1301 = H0000

LRC CHK 1
LRC CHK 0

10. RTU Mode: When PLC is connected to VFD-S AC motor drive
PLC Ö VFD-S, PLC sends: “01 03 2100 0006 CF F4”
VFD-S Ö PLC, PLC receives: “01 03 0C 0000 0503 0BB8 0BB8 0000 012D 8E C5”
Registers for sent data (sending messages)

9-4

Register

DATA

D1256 Low
D1257 Low
D1258 Low
D1259 Low
D1260 Low
D1261 Low
D1262 Low

01 H
03 H
21 H
00 H
00 H
06 H
CF H

Explanation
Address
Function
Starting Data Address
Number of Data (counted by words)
CRC CHK Low
DVP-PLC Application Manual

9 Application Instructions API 150-199
Register

DATA

D1263 Low

F4 H

Explanation
CRC CHK High

Registers for received data D0 (responding messages)
Register
D0 Low
D1 Low
D2 Low
D3 Low
D4 Low
D5 Low
D6 Low
D7 Low
D8 Low
D9 Low
D10 Low
D11 Low
D12 Low
D13 Low
D14 Low
D15 Low
D16 Low

DATA
01 H
03 H
0C H
00 H
00 H
05 H
03 H
0B H
B8 H
0B H
B8 H
00 H
00 H
01 H
2D H
8E H
C5 H

Explanation
Address
Function
Number of Data (byte)
Content of
address 2100H

PLC automatically convert ASCII codes to numerals
and store the numeral in D1296 = H0000

Content of
address 2101H

PLC automatically convert ASCII codes to numerals
and store the numeral in D1297 = H0503

Content of
address 2102H

PLC automatically convert ASCII codes to numerals
and store the numeral in D1298 = H0BB8

Content of
address 2103H

PLC automatically convert ASCII codes to numerals
and store the numeral in D1299 = H0BB8

Content of
address 2104H

PLC automatically convert ASCII codes to numerals
and store the numeral in D1300 = H0000

Content of
address 2105H

PLC automatically convert ASCII codes to numerals
and store the numeral in D1301 = H012D

CRC CHK Low
CRC CHK High

Program Example 2:
1.

Function code K6(H6): For writing a word data to register
When PLC is connected to VFD-S AC motor drive: M1143 = Off, in ASCII mode
When PLC is connected to VFD-S AC motor drive: M1143 = On, in RTU mode

2.

When in ASCII mode, the user stores the data to be written in the designated register D50 in hex format. The
data sent back from AC motor drive are stored in D1070 ~ D1076.

3.

When in RTU mode, the user stores the data to be written in the designated register D50 in hex format. The
data sent back from AC motor drive are stored in D1070 ~ D1077.

4.

When In ASCII mode or RTU mode, PLC will store the data to be sent in D1256 ~ D1295. If necessary, the
user can move the data to other general registers by using MOV, DMOV or BMOV instruction. Other
instructions of ES/EX/SS do not function on the data in D1256 ~ D1295.

5.

After receiving the data sent back from AC motor drive is completed, PLC will auto-check if the received data
are incorrect. M1140 will be On if there is an error.

6.

If the device address is illegal to a designated communication device, the communication device will respond
with an error message and PLC will store the error code in D1130 and M1141 = On. For example, if 8000H is
illegal to VFD-S, M1141 will be On and D1130 = 2. See user manual of VFD-S for error codes.

7.

After M1140 = On or M1141 = On, PLC will send another correct datum to AC motor drive. If the data sent back
from AC motor drive is correct, M1140 and M1141 will be reset.

DVP-PLC Application Manual

9-5

9 Application Instructions API 150-199
M1002
MOV

H87

D1120

SET

M1120

MOV

K100

Set up communication protocol 9600, 8, E, 1

Retain communication protocol
Communication time-out 100ms

D1129

X10
M1143
X0
SET

M1122

MODRW

K1

Set up sending request

X0
K6

Address of
communication
device K1

M1127

H2000

D50

K1

Function Data address Register
Data length
code K6: H2000
for storing (word)
write 1
the data
word datum

Process of received data
ASCII mode: the received data will be stored in special registers D1070 ~ D1076 in ASCII format.
RTU mode: the received data will be stored in special registers D1070 ~ D1077 in hex format.
RST

8.

M1127

Sending/receiving of data is completed. The flag is reset.

ASCII Mode: When PLC is connected to VFD-S AC motor drive.
PLC Ö VFD-S, PLC sends: “01 06 0100 1770 71”
VFD-S Ö PLC, PLC receives: “01 06 0100 1770 71”
Registers for sent data (sending messages)
Register
D1256 Low
D1256 High
D1257 Low
D1257 High
D1258 Low
D1258 High
D1259 Low
D1259 High
D1260 Low
D1260 High
D1261 Low
D1261 High
D1262 Low
D1262 High

DATA
‘0’
‘1’
‘0’
‘6’
‘0’
‘1’
‘0’
‘0’
‘1’
‘7’
‘7’
‘0’
‘7’
‘1’

30 H
31 H
30 H
36 H
30 H
31 H
30 H
30 H
31 H
37 H
37 H
30 H
37 H
31 H

Explanation
ADR 1
ADR 0
CMD 1
CMD 0

Address of AC motor drive: ADR (1,0)
Command code: CMD (1,0)

Data Address

Data content

The content of register D50 (H1770 = K6,000)

LRC CHK 1
LRC CHK 0

LRC CHK (0,1) is error check

Registers for received data (responding messages)
Register
D1070 Low
D1070 High
D1071 Low
D1071 High
9-6

DATA
‘0’
‘1’
‘0’
‘6’

30 H
31 H
30 H
36 H

Explanation
ADR 1
ADR 0
CMD 1
CMD 0
DVP-PLC Application Manual

9 Application Instructions API 150-199
Register
D1072 Low
D1072 High
D1073 Low
D1073 High
D1074 Low
D1074 High
D1075 Low
D1075 High
D1076 Low
D1076 High
9.

DATA
‘0’
‘1’
‘0’
‘0’
‘1’
‘7’
‘7’
‘0’
‘7’
‘1’

30 H
31 H
30 H
30 H
31 H
37 H
37 H
30 H
37 H
31 H

Explanation

Data Address

Data content
LRC CHK 1
LRC CHK 0

RTU Mode: When PLC is connected to VFD-S AC motor drive
PLC Ö VFD-S, PLC sends: “01 06 2000 0012 02 07”
VFD-S Ö PLC, PLC receives: “01 06 2000 0012 02 07”
Registers for sent data (sending message)
Register

DATA

D1256 Low
D1257 Low
D1258 Low
D1259 Low
D1260 Low
D1261 Low
D1262 Low
D1263 Low

01 H
06 H
20 H
00 H
00 H
12 H
02 H
07 H

Explanation
Address
Function
Data Address
Data content

The content of register D50 (H12)

CRC CHK Low
CRC CHK High

Registers for received data (responding message)
Register

DATA

D1070 Low
D1071 Low
D1072 Low
D1073 Low
D1074 Low
D1075 Low
D1076 Low
D1077 Low

01 H
06 H
20 H
00 H
00 H
12 H
02 H
07 H

Explanation
Address
Function
Data Address
Data content
CRC CHK Low
CRC CHK High

Program Example 3:
1.

Function code K16(H10): For writing many word data into register.
When PLC is connected to VFD-S AC motor drive: M1143 = Off, in ASCII mode
When PLC is connected to VFD-S AC motor drive: M1143 = On, in RTU mode

2.

When in ASCII mode, the user stores the data to be written in the designated register D50 in hex format. The
data sent back from AC motor drive are stored in D1070 ~ D1076.

3.

When in RTU mode, the user stores the data to be written in the designated register D50 in hex format. The

DVP-PLC Application Manual

9-7

9 Application Instructions API 150-199
data sent back from AC motor drive are stored in D1070 ~ D1077.
4.

When In ASCII mode or RTU mode, PLC will store the data to be sent in D1256 ~ D1295. If necessary, the
user can move the data to other general registers by using MOV, DMOV or BMOV instruction. Other
instructions of ES/EX/SS do not function on the data in D1256 ~ D1295.

5.

After receiving the data sent back from AC motor drive is completed, PLC will auto-check if the received data
are incorrect. M1140 will be On if there is an error.

6.

If the device address is illegal to a designated communication device, the communication device will respond
with an error message and PLC will store the error code in D1130 and M1141 = On. For example, if 8000H is
illegal to VFD-S, M1141 will be On and D1130 = 2. See user manual of VFD-S for error codes.

7.

After M1140 = On or M1141 = On, PLC will send another correct datum to AC motor drive. If the data sent back
from AC motor drive is correct, M1140 and M1141 will be reset.
M1002
MOV

H87

SET

M1120

MOV

K100

D1120

Set up communication protocol 9600, 8, E, 1

Retain communication protocol
D1129

Communication time-out 100ms

X10
M1143
X0
SET

Set up sending request

M1122

X0
MODRW

K1

K16

Address of
communication
device K1

M1127

H2000

D50

K8

Function Data address Register
Data length
code K16: H2000
for storing (word)
write many
the data
word data

Process of received data
ASCII mode : The received data are stored in special registers D1070 ~ D1078 in ASCII format.
RTU mode : The received data are stored in special registers D1070~1078 in hex format.
RST

8.

M1127

Sending/receiving of data is completed. The flag is reset.

ASCII Mode: When PLC is connected to VFD-S AC motor drive.
PLC Ö VFD-S, PLC sends: “01 10 2000 0002 04 0012 1770 30”
VFD-S Ö PLC, PLC receives: “01 10 2000 0002 CD”
Registers for sent data (sending messages)
Register
D1256 Low
D1256 High
D1257 Low
D1257 High
D1258 Low
D1258 High
D1259 Low
D1259 High

9-8

DATA
‘0’
‘1’
‘1’
‘0’
‘2’
‘0’
‘0’
‘0’

30 H
31 H
31 H
30 H
32 H
30 H
30 H
30 H

Explanation
ADR 1
ADR 0
CMD 1
CMD 0

Address of AC motor drive: ADR (1,0)
Command code: CMD (1,0)

Data Address

DVP-PLC Application Manual

9 Application Instructions API 150-199
Register
D1260 Low
D1260 High
D1261 Low
D1261 High
D1262 Low
D1262 High
D1263 Low
D1263 High
D1264 Low
D1264 High
D1265 Low
D1265 High
D1266 Low
D1266 High
D1267 Low
D1267 High

DATA
‘0’
‘0’
‘0’
‘2’
‘0’
‘4’
‘0’
‘0’
‘1’
‘2’
‘1’
‘7’
‘7’
‘0’
‘3’
‘0’

Explanation

30 H
30 H
30 H
32 H
30 H
34 H
30 H
30 H
31 H
32 H
31 H
37 H
37 H
30 H
33 H
30 H

Number of Registers

Byte Count

Data contents 1

The content of register D50 (H12)

Data contents 2

The content of register D51 (H1770 = K6,000)

LRC CHK 1
LRC CHK 0

Error checksum: LRC CHK (0,1)

Registers for received data (responding messages)
Register
D1070 Low
D1070 High
D1071 Low
D1071 High
D1072 Low
D1072 High
D1073 Low
D1073 High
D1074 Low
D1074 High
D1075 Low
D1075 High
D1076 Low
D1076 High
9.

DATA
‘0’
‘1’
‘1’
‘0’
‘2’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘2’
‘C’
‘D’

Explanation

30 H
31 H
31 H
30 H
32 H
30 H
30 H
30 H
30 H
30 H
30 H
32 H
43 H
44 H

ADR 1
ADR 0
CMD 1
CMD 0
Data Address

Number of Registers
LRC CHK 1
LRC CHK 0

RTU Mode: When PLC is connected to VFD-S AC motor drives
PLC Ö VFD-S, PLC sends: “01 10 2000 0002 04 0012 1770 C4 7F”
VFD-S Ö PLC, PLC receives: “01 10 2000 0002 4A 08”
Registers for sent data (sending messages)
Register

DATA

D1256 Low
D1257 Low
D1258 Low
D1259 Low
D1260 Low
D1261 Low
D1262 Low

01 H
10 H
20 H
00 H
00 H
02 H
04 H

DVP-PLC Application Manual

Explanation
Address
Function
Data Address
Number of Registers
Byte Count
9-9

9 Application Instructions API 150-199
Register

DATA

D1263 Low
D1264 Low
D1265 Low
D1266 Low
D1267 Low
D1268 Low

00 H
12 H
17 H
70 H
C4 H
7F H

Explanation
Data content 1

The content of register D50 (H12)

Data content 2

The content of register D51 (H1770 = K6,000)

CRC CHK Low
CRC CHK High

Registers for received data (responding messages)
Register

DATA

D1070 Low
D1071 Low
D1072 Low
D1073 Low
D1074 Low
D1075 Low
D1076 Low
D1077 Low

01 H
10 H
20 H
00 H
00 H
02 H
4A H
08 H

Explanation
Address
Function
Data Address
Number of Registers
CRC CHK Low
CRC CHK High

Program Example 4:
1.

Function code K2(H02): Read many bit devices. The read communication code will be placed in the register
designated by the 4th operand of the instruction. In the example below, K6 refers to the data length (bit).
Assume Y2=Y4=Y5=Y11=Y14=On for Y0 ~ Y16 status.
M1002
MOV

H87

SET

M1120

MOV

K100

D1120

Set up communication protocol to 9600,8,E,1

Retain communication protocol

D1129

Set up communication time-out: 100ms

X10
M1143

Set up RTU mode

X0
SET

M1122

Set up sending request

X0
MODRW

K1
Address of
communication
device K1

M1127

K2
Function
code K2:
reads many
bit data

H0500

D0

Data address:
H0500
PLC device:
Y0

Data
register

K6
Read/write
data length
(word)

Process of received data
ASCII mode: The received data are stored in special registers starting from D0 in
ASCII format. PLC will automatically convert the data into hex and store them in
D1296 ~ D1311.
RTU mode: The received data are stored in special registers starting from D0
designated by the user in hex format.

RST

9-10

M1127

Sending/receiving of data is completed.
The flag is reset.

DVP-PLC Application Manual

9 Application Instructions API 150-199
2.

ASCII Mode: When PLC1 is connected to PLC2
When X0 = On, function code 02 of MODRW instrruction will start to be executed.
PLC1Ö PLC2, PLC1 sends: “01 02 0500 0010 E8”
PLC2 Ö PLC1, PLC1 receives: “01 02 02 34 12 B5”
Registers for PLC1 sent data (sending messages)
Register
D1256 Low
D1256 High
D1257 Low
D1257 High
D1258 Low
D1258 High
D1259 Low
D1259 High
D1260 Low
D1260 High
D1261 Low
D1261 High
D1262 Low
D1262 High

DATA
‘0’
‘1’
‘0’
‘2’
‘0’
‘5’
‘0’
‘0’
‘0’
‘0’
‘1’
‘0’
‘E’
‘8’

Explanation
30 H
31 H
30 H
32 H
30 H
35 H
30 H
30 H
30 H
30 H
31 H
30 H
45 H
38 H

ADR 1
ADR 0
CMD 1
CMD 0

Address of connected device: ADR (1,0)
Command code: CMD (1,0)

Starting Data Address

Number of Data (counted by bits)
LRC CHK 1
LRC CHK 0

Error checksum: LRC CHK (0,1)

Register (D0) for PLC1 received data (responding messages):
Register
D0 Low
D0 High
D1 Low
D1 High
D2 Low
D2 High
D3 Low
D3 High
D4 Low
D4 High
D5 Low
D5 High
3.

DATA
‘0’
‘1’
‘0’
‘2’
‘0’
‘2’
‘3’
‘4’
‘1’
‘2’
‘B’
‘5’

Explanation
30 H
31 H
30 H
33 H
30 H
32 H
33 H
34 H
31H
32H
52H
35 H

ADR 1
ADR 0
CMD 1
CMD 0
Number of data (counted by bytes)
Content in
address 0500 ~
0505

PLC automatically convert ASCII words and store
the result in D1296 = H1234
(b0 ~ b5 are valid)

LRC CHK 1
LRC CHK 0

RTU Mode: When PLC1 is connected to PLC2
When X10 = On, function code 02 of MODRW instruction will start to be executed.
PLC1Ö PLC2, PLC1 sends: “01 02 0500 0010 79 0A”
PLC2 Ö PLC1, PLC1 receives: “01 02 02 34 12 2F 75”
Registers for PLC sent data (sending messages):
Register
D1256 low
D1257 low

DATA
1H
2H

DVP-PLC Application Manual

Explanation
Address
Function
9-11

9 Application Instructions API 150-199
Register

DATA

D1258 low
D1259 low
D1260 low
D1261 low
D1262 low
D1263 low

Explanation

5H
0H
0H
10 H
79 H
0A H

Starting data address
Number of data (counted by words)
CRC CHK Low
CRC CHK High

Register (D0) for PLC received data (responding messages):
Register

DATA

D0 low
D1 low
D2 low
D3 low
D4 low
D5 low
D6 low

Explanation

01 H
02 H
02 H
34 H
12 H
2F H
75 H

Address
Function
Number of data (byte)
Content in address
PLC automatically stores the value in
0500H
D1296=H1234 (b0 ~ b5 are valid)
CRC CHK Low
CRC CHK High

Program Example 5:
1.

Function code K15(H0F): Write many bit devices. The preset bit status has to be placed in the register
designated by the 4th operand of the instruction in b0 ~ b5 order. 1 word is able to contain 16 bit status data.
M1002
MOV

H87

SET

M1120

MOV

K100

D1120

Set up communication protocol to 9600,8,E,1

Retain communication protocol

D1129

Set up communication time-out: 100ms

X10
M1143

Set up RTU mode

X0
SET

M1122

MOV

HFFFF

Set up sending request

D0

Set up status value to be written into device

X0
MODRW

K1
Address of
communication
device K1

M1127

K15

H0500

Function
code K15:
writes many
bit data

Data address:
H0500
PLC device:
Y0

D0
Data
register

K6
Read/write
data length
(word)

Process of received data
ASCII mode: The received data are stored in special registers starting from D0 in ASCII format.
PLC will automatically convert the data into hex and store them in D1296 ~ D1311.
RTU mode: The received data are stored in special registers starting from D0 desiganted
by the user in hex format.

RST

9-12

M1127

Sending/receiving of data is completed.
The flag is reset.

DVP-PLC Application Manual

9 Application Instructions API 150-199
2.

ASCII Mode: When PLC1 is connected to PLC2
When X0 = On, function code 0F of MODRW instruction will start to be executed.
PLC1 Ö PLC2, PLC sends: “ 1 0F 0500 0006 01 3F A5”
PLC2 Ö PLC1, PLC receives: “ 1 0F 0500 0006 E5”
Registers for PLC1 sent data (sending messages):
Register
D1256 low
D1256 high
D1257 low
D1257 high
D1258 low
D1258 high
D1259 low
D1259 high
D1260 low
D1260 high
D1261 low
D1261 high
D1262 low
D1262 high
D1263 low
D1263 high
D1264 low
D1264 high

DATA
‘0’
‘1’
‘0’
‘F’
‘0’
‘5’
‘0’
‘0’
‘0’
‘0’
‘0’
‘6’
‘0’
‘1’
‘3’
‘F’
‘A’
‘5’

Explanation
30 H
31 H
30 H
46 H
30 H
35 H
30 H
30 H
30 H
30 H
30H
36 H
30 H
31 H
33 H
46 H
41 H
35 H

ADR 1
ADR 0
CMD 1
CMD 0

Address of connected device: ADR (1,0)
Command code: CMD (1,0)

Data address

Number of data (counted by bits)

Byte Count
Data content 1

Content in D0 register (H3F)

LRC CHK 1
LRC CHK 0

Error checksum: LRC CHK (0,1)

Registers for PLC1 received data (responding messages):
Register
D1070 low
D1070 high
D1071 low
D1071 high
D1072 low
D1072 high
D1073 low
D1073 high
D1074 low
D1074 high
D1075 low
D1075 high
D1076 low
D1076 high
3.

DATA
‘0’
‘1’
‘0’
‘F’
‘0’
‘5’
‘0’
‘0’
‘0’
‘0’
‘0’
‘6’
‘E’
‘5’

Explanation
30 H
31 H
31 H
46 H
30 H
35 H
30 H
30 H
30 H
30 H
30 H
36 H
45 H
35 H

ADR 1
ADR 0
CMD 1
CMD 0
Data address

Number of registers
LRC CHK 1
LRC CHK 0

RTU Mode: When PLC1 is connected to PLC2
When X10 = On, function code 15 of MODRW instruction will start to be executed.
PLC1Ö PLC2, PLC1 sends: “01 0F 0500 0006 01 3F”

DVP-PLC Application Manual

9-13

9 Application Instructions API 150-199
PLC2 Ö PLC1, PLC1 receives: “01 0F 0500 0006 D5 05”
Registers for PLC sent data (sending messages):
Register

DATA

D1256 low
D1257 low
D1258 low
D1259 low
D1260 low
D1261 low
D1262 low
D1263 low

01 H
0F H
05 H
00 H
00 H
06 H
01 H
3F H

Explanation
Address
Function
Data address
Data content

Content in D0 register (H3F)

CRC CHK Low
CRC CHK High

Registers for PLC received data (responding messages):
Register

DATA

D1070 low
D1071 low
D1072 low
D1073 low
D1074 low
D1075 low
D1076 low
D1077 low

01 H
0F H
05 H
00 H
00 H
06H
D5H
05 H

Explanation
Address
Function
Data address
Data content
CRC CHK Low
CRC CHK High

Program Example 6:
1.

Function code K5(H5): Write status of single bit device. In the example below, Set K1 to bit On, K0 to bit Off.
M1002
MOV

H87

SET

M1120

MOV

K100

D1120

Set up communication protocol to 9600,8,E,1

Retain communication protocol

D1129

Set up communication time-out: 100ms

M10
M1143

Set up RTU mode

M0
SET

M1122 Set up sending request

M0
M0
MODRW

K1
Address of
communication
device K1

K5
Function
code K15:
sets single
point On/Off

H0500

D0

Data address:
H0500
PLC device:
Y0

K1
Set On

M0
MODRW

K1

K5

H0500

D0

K0
Set Off

9-14

DVP-PLC Application Manual

9 Application Instructions API 150-199
M1127
Process of received data

ASCII mode: The received data are stored in special registers D1070 ~ D1076 in ASCII format.
RTU mode: The received data are stored in special registers D1070 ~ D1077 in hex format.

RST

2.

M1127

Sending/receiving of data is completed.
The flag is reset.

ASCII Mode: When PLC1 is connected to PLC2
When M0 = On, function code 05 (bit On) of MODRW instruction will start to be executed.
PLC1Ö PLC2, PLC1 sends: “01 05 0500 FF00 F6”
PLC2 Ö PLC1, PLC1 receives: “01 05 0500 FF00 F6”
Registers for PLC1 sent data (sending messages):
Register
D1256 low
D1256 high
D1257 low
D1257 high
D1258 low
D1258 high
D1259 low
D1259 high
D1260 low
D1260 high
D1261 low
D1261 high
D1262 low
D1262 high

DATA
‘0’
‘1’
‘0’
‘5’
‘0’
‘5’
‘0’
‘0’
‘F’
‘F’
‘0’
‘0’
‘F’
‘6’

Explanation
30 H
31 H
30 H
35 H
30 H
35 H
30 H
30 H
46 H
46 H
30 H
30 H
46 H
36 H

ADR 1
ADR 0
CMD 1
CMD 0

Address of connected device: ADR (1,0)
Command code: CMD (1,0)

Starting data address

Request bit On/Off
LRC CHK 1
LRC CHK 0

Error checksum: LRC CHK (0,1)

Registers (D0) for PLC1 received data (responding messages):
Register
D1070 low
D1070 high
D1071 low
D1071 high
D1072 low
D1072 high
D1073 low
D1073 high
D1074 low
D1074 high
D1075 low
D1075 high
D1076 low
D1076 high

DATA
‘0’
‘1’
‘0’
‘5’
‘0’
‘5’
‘0’
‘0’
‘F’
‘F’
‘0’
‘0’
‘F’
‘6’

DVP-PLC Application Manual

Explanation
30 H
31 H
30 H
35 H
30 H
35 H
30 H
30 H
46 H
46 H
30 H
30 H
46 H
36 H

ADR 1
ADR 0
CMD 1
CMD 0

Address of connected device: ADR (1,0)
Command code: CMD (1,0)

Starting data address

Request bit On/Off
LRC CHK 1
LRC CHK 0

Error checksum: LRC CHK (0,1)

9-15

9 Application Instructions API 150-199
When M0 = Off, function code 05 (bit Off) will start to be executed.
PLC1Ö PLC2, PLC1 sends: “01 05 0500 FF00 F6”
PLC2 Ö PLC1, PLC1 receives: “01 05 0500 FF00 F6”
Registers for PLC1 sent data (sending messages):
Register
D1256 low
D1256 high
D1257 low
D1257 high
D1258 low
D1258 high
D1259 low
D1259 high
D1260 low
D1260 high
D1261 low
D1261 high
D1262 low
D1262 high

DATA
‘0’
‘1’
‘0’
‘5’
‘0’
‘5’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘F’
‘5’

Explanation
30 H
31 H
30 H
35 H
30 H
35 H
30 H
30 H
30 H
30 H
30 H
30 H
46 H
35 H

ADR 1
ADR 0
CMD 1
CMD 0

Address of connected device: ADR (1,0)
Command code: CMD (1,0)

Starting data address

Request bit On/Off
LRC CHK 1
LRC CHK 0

Error checksum: LRC CHK (0,1)

Registers (D0) for PLC1 received data (responding messages):
Register
D1070 low
D1070 high
D1071 low
D1071 high
D1072 low
D1072 high
D1073 low
D1073 high
D1074 low
D1074 high
D1075 low
D1075 high
D1076 low
D1076 high
3.

DATA
‘0’
‘1’
‘0’
‘5’
‘0’
‘5’
‘0’
‘0’
‘0’
‘0’
‘0’
‘0’
‘F’
‘5’

Explanation
30 H
31 H
30 H
35 H
30 H
35 H
30 H
30 H
30 H
30 H
30 H
30 H
46 H
35 H

ADR 1
ADR 0
CMD 1
CMD 0

Address of connected device: ADR (1,0)
Command code: CMD (1,0)

Starting data address

Request bit On/Off
LRC CHK 1
LRC CHK 0

Error checksum: LRC CHK (0,1)

RTU Mode: When PLC1 is connected to PLC2
When M0 = On, function code 05 (bit On) of MODRW instruction will start to be executed.
PLC1Ö PLC2, PLC1 sends: “01 05 0500 FF00 8C F6”
PLC2 Ö PLC1, PLC1 receives: “01 05 0500 FF00 8C F6”
Registers for PLC sent data (sending messages):

9-16

Register

DATA

D1256 low
D1257 low

01 H
05 H

Explanation
Address
Function

DVP-PLC Application Manual

9 Application Instructions API 150-199
Register

DATA

D1258 low
D1259 low
D1260 low
D1261 low
D1262 low
D1263 low

05 H
00 H
FF H
00 H
8C H
F6 H

Explanation
Starting data address
Set bit On/Off
Request bit ON/OFF
CRC CHK Low
CRC CHK High

Registers (D0) for PLC received data (responding messages):
Register

DATA

D1070 low
D1071 low
D1072 low
D1073 low
D1074 low
D1075 low
D1076 low
D1077 low

01 H
05 H
05 H
00 H
FF H
00 H
8C H
F6 H

Explanation
Address
Function
Starting data address
Set bit On/Off
Request bit ON/OFF
CRC CHK Low
CRC CHK High

When M10 = Off, function code 05 (bit Off) of MODRW instruction will start to be executed.
PLC1Ö PLC2, PLC1 sends: “01 05 0500 0000 CD 06”
PLC2 Ö PLC1, PLC1 receives: “01 05 0500 0000 CD 06”
Registers for PLC sent data (sending messages):
Register

DATA

D1256 low
D1257 low
D1258 low
D1259 low
D1260 low
D1261 low
D1262 low
D1263 low

01 H
05 H
05 H
00 H
00 H
00 H
CD H
06 H

Explanation
Address
Function
Starting data address
Set bit On/Off
Request bit ON/OFF
CRC CHK Low
CRC CHK High

Registers (D0) for PLC received data (responding messages):
Register

DATA

D1070 low
D1071 low
D1072 low
D1073 low
D1074 low
D1075 low
D1076 low
D1077 low

01 H
05 H
05 H
00 H
00 H
00 H
CD H
06 H

Explanation
Address
Function
Starting data address
Set bit On/Off
Request bit ON/OFF
CRC CHK Low
CRC CHK High

Remarks:
1.

The activation condition placed before MODRD, RDST and MODRW instructions cannot use rising-edge or

DVP-PLC Application Manual

9-17

9 Application Instructions API 150-199
falling-edge contacts; otherwise the data stored in the registers for received data will encounter errors.
2.

Flags and special registers for MODRW instruction in RS-485 communication. (For details, see API 80 RS).
Flags

M1121

Function
For retaining communication setups. After the setup is made, changes in D1120 will be
invalid.
When Off, RS-485 is sending data.

M1122

Sending request

M1123

Receiving is completed

M1124

Waiting for receiving data

M1125

Disable receiving status

M1126

Selecting STX/ETX system

M1127

Sending/receiving data through MODRD / RDST / MODRW instructions is completed.

M1128

Sending data…/receiving data…

M1129

Receiving data time-out

M1130

User/system defined STX/ETX

M1131

On when MODRD / MODWR / MODRW is converting data to hex

M1140

MODRD / MODWR / MODRW data receiving error

M1141

MODRD / MODWR / MODRW parameter error

M1142

VFD-A handy instruction data receiving error

M1120

D1120

ASCII/RTU mode selection (used with MODRD/MODWR/MODRW) (Off = ASCII mode;
On = RTU mode)
When the built-in RS-485 communication instruction is executed and sends out data, the
receiving end will respond with a message and the message will be stored in D1070 ~
D1085. The user can check the registers for the messages.
RS-485 communication protocol

D1121

PLC communication address (saving PLC communication address; latched)

D1122

Remaining words of the sent data

D1123

Remaining words of the received data

D1124

Start text definition (STX)

D1125

Definition of end text 1 (ETX1)

D1126

Definition of end text 2 (ETX2)

D1129

Abnormal communication time-out. Unit: ms

D1130

Records of error codes sent back from MODBUS
When the built-in RS-485 communication instruction MODRW is executed, the sent out
data will be stored in D1256 ~ D1295. The user can check whether the instruction is
correct by the contents in the registers.
PLC will automatically convert the ASCII data stored in the register designated by the user
into hex format.

M1143
D1070 ~ D1085

D1256 ~ D1295
D1296 ~ D1311

9-18

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

151

PWD
Type

OP
S
D

Operands
Detection of Input Pulse Width

Bit Devices
X
*

Function

Y

M

S

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F PWD: 5 steps
*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device

D: Destination device for storing the detected result

Explanations:
1.

Range of S: X10 ~ X17

2.

Range of D: D0 ~ D999, occupying 2 consecutive devices. Can only be used once in the program.

3.

PWD instruction is for detecting the time span of output signals from X10 ~ X17; the valid frequency range is 1
~1kHz. When M1169 = On, the instruction will detect the time span of the continuous rising edge and falling
edge of the input signals (time unit: 100us). When M1169 = On, the instruction will detect the time span of 2
continuous rising edges of the input signals (time unit: 1us). It cannot designate the same X10 ~ X17 as does
DCNT and ZRN instructions.

4.

D occupies two continuous devices. The longest detectable time is 21,474.83647 seconds, about 357.9139
minutes or 5.9652 hours.

5.

There is no limitation on the times of using this instruction. However, only one instruction can be executed at a
time.

Program Example:
When X0 = On, record the time span of X10 = On and store it in D1 and D0.
X0
PWD

X10

D0

DVP-PLC Application Manual

9-19

9 Application Instructions API 150-199
API

Mnemonic

152

RTMU
Type

Y

Function
Start of the Measurement of Execution Time of I Interruption

Bit Devices
X

OP

Operands

M

S

D
n

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F RTMU: 5 steps
* *
*
* *
*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device for storing the measuring time (unit: 1us)

n: Measurement time base. Parameter range: K10 ~ K500

(time unit: 1us)
Explanations:
1.

Range of D: K0 ~ K9

2.

Range of n: K10 ~ K500

3.

The designated special D registers (D1156 ~ D1165) can measure up to 10 interruption subroutines. For
example, when D = K5, the designated D register will be D1161.

4.

When RTMU is executed, if the D and n entered by the user are legal, interruption of the timer will be enabled
and the counting starts and the special D designated by D is cleared as 0. When RTMD is executed,
interruption of the timer is disabled and the calculated time will be assigned to special D designated by RTMD.

5.

With API 153 RTMD, RTMU can measure the execution time of “I” interruption service subroutine, which can
be reference for dealing with the high-speed response when the user is at the initial stage of developing the
program.

9-20

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

153

RTMD
Type

Function
End of the Measurement of the Execution Time of I Interruption

Bit Devices
X

OP

Operands

Y

M

D

S

Word Devices

Program Steps

K H KnX KnY KnM KnS T C D E F RTMD: 3 steps
* *
*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: Device to store the measuring time (unit: 1us).
Explanations:
1. Range of D: K0 ~ K9. The No. of D has to be the same as that designated by D in API 152 RTMU; otherwise the
result of the measurement may be unexpectable.
Program Example:
When X0 goes from Off to On, the program will enter I001 interruption subroutine. RTMU will activate an 8-bit timer
(unit: 10us) and RTMD (when D = K0) will shut down the timer and store the time in the timer in special D registers
(D1156 ~ D1165, designated by K0 ~ K9).
FEND
M1000
I 001

RTMU

K0

K10
Both K0 should be the same

M1000
RTMD

K0

IRET
M1000
I 101

RTMU

K1

K10
Both K1 should be the same

M1000
RTMD

K1

IRET
END

Remarks:
1.

We suggest you remove this instruction after you finish developing your PLC program.

2.

Due to the lower priority of the interruption enabled by RTMU, when RTMU is enabled, other high-speed pulse
input counting or high-speed pulse output may result in failure to trigger the timer.

3.

If you activate RTMU but do not activate RTMD before the end of the interruption, the interruption will not be
shut down.

4.

RTMU instruction activates 1 timer interruption in PLC. Therefore, if many RTMU or RTMD are executed at the

DVP-PLC Application Manual

9-21

9 Application Instructions API 150-199
same time, confusion in the timer may occur. Please be aware of the situation.

9-22

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

154

RAND
Type

Y

Function
Random Number

P

Bit Devices
X

OP

Operands

M

Word Devices
S

S1
S2
D

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*
*
*

E
*
*
*

F RAND, RANDP: 7 steps
*
*
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Lower bound of the random number

S2: Upper bound of the random number

D: The random number

produced
Explanations:
1.

S1≦S2; K0 ≦ S1 , S2 ≦K32,767

2.

See the specifications of each model for their range of use.

3.

Entering S1 > S2 will result in operation error. The instruction will not be executed at this time, M1067, M1068 =
On and D1067 records the error code 0E1A (hex).

Program Example:
When X10 = On, RAND will produce the random number between the lower bound D0 and upper bound D10 and
store the result in D20.
X10
RAND

D0

D10

DVP-PLC Application Manual

D20

9-23

9 Application Instructions API 150-199
API
155

Mnemonic
D

S
D1
D2

Function
Read the Absolute Position from a Servo Motor

ABSR

Type
OP

Operands

Bit Devices
X
*

Y
*
*

M
*
*

Word Devices
S
*
*

K

H KnX KnY KnM KnS T

*

*

*

PULSE

*

Program Steps
C

D

E

*

*

*

F DABSR: 13 steps

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Input signal from Servo (occupies 3 consecutive devices)
consecutive devices)

D1: Control signal for controlling Servo (occupies 3

D2: Absolute position data (32-bit) read from Servo

Explanations:
1.

Operand S and D1 of SA series MPU do not support E, F index register modification.

2.

See the specifications of each model for their range of use.

3.

This instruction can only be used once in the program.

4.

Flag: see remarks for more details.

5.

This instruction reads the absolute position (ABS) of MITSUBISHI MR-J2 servo drive (with absolute position
check function).

6.

S will occupy 3 consecutive devices, S, S +1, and S +2. S and S +1 are connected to the absolute position (bit
0, bit 1) on the servo for data transmitting. S +2 is connected to Servo for transmitting data ready flag. See the
wiring example below for more details.

7.

D1 will occupy 3 consecutive devices, D1, D1 + 1, D1 + 2. D1 is connected to SERVO On (SON) of Servo. D1+1 is
connected to ABS transmisstion mode of Servo and D1+2 is connected to ABS request signal. See the wiring
example below for more details.
PLC
DVP32EH00T

SERVO AMP
MR-J2-A

+24V
S/S
X0
X1
X2
24G

Y4
Y5
Y6
C4

8.

ABS(bit 0)
ABS(bit 1)
transmission data is ready

SERVO ON
ABS transmission mode
ABS request

CN1B
VDD

3

D01
ZSP
TLC
SG

4
19
6
10

SON
ABSM
ABSR

5
8
9

D2 will occupy 2 consecutive devices D2 and D2 + 1. D2 is the lower 16 bits and D2 + 1 is the higher 16 bits. The
absolute position data should be written into the present value registers (D1337, D1336) of CH0 pulse (Y0, Y1)
or the present value registers (D1339, D1338) of CH1 pulse (Y2, Y3) in EH series MPU; therefore, we suggest

9-24

DVP-PLC Application Manual

9 Application Instructions API 150-199
you designate the two corresponding registers. If you designate other devices as the registers, you still have to
transmit the data to D1337 and D1336 of CH0 or D1339 and D1338 of CH1. In addition, the absolute position
data should be written into the present value registers (D1348, D1349) of CH0 pulse (Y10) or the present value
registers (D1350, D1351) of CH1 pulse (Y11) in SC series MPU; therefore, we suggest you designate the two
corresponding registers. If you designate other devices as the registers, you still have to transmit the data to
D1348 and D1349 of CH0 or D1350 and D1351 of CH1.
9.

When DABSR instruction starts to read, after finishing reading the absolute position of SERVO, flag M1029 will
be On. The user has to reset the flag.

10. When driving the DABSR command, please specify normally open contact. If the drive contact of DABSR
command turns Off when DABSR command read starts, the execution of absolute current value read will be
interrupted and result in incorrect data. Please be careful and notice that.
Program Example:
1.

When X7 = On, the 32-bit absolute position data read from Servo will be stored in the present value registers
(D1337, D1336) of CH0 pulse in EH MPU. At the same time, the timer T10 is enabled and starts to count for 5
seconds. If the reading of the absolute position is not completed after 5 seconds, M10 will be On, indicating that
the reading of absolute position encounters abnormality.

2.

When enabling the connection to the system, please synchronize the power input of DVP-PLC
EH/EH2/SV/EH3/SV2 and SERVO AMP or activate the power of SERVO AMP earlier than DVP-PLC.
S

D1

D2

DABS

X0

Y4

D1336

TMR

T0

K50

Time-out : 5 sec.

X7
M11
ABS read completed

T0
Read overtime

M10

ABS absolute position data read is abnormal

M1029
SET

M11

ABS absolute position data read completed

execution completed
flag

Remarks:
1.

If the instruction is interrupted when PLC is still reading the absolute position of SERVO, an ALARM message
(ALE5) will occur in SERVO.

2.

Timing chart of DABSR instruction reading absolute position:
a) When DABSR instruction starts to execute, it will drive SERBVO On (SON) and ABS transmittion mode for
output.
b) By “transmission is ready” and “ABS request” signals, you can confirm the transmission and reciept of both
sides as well as processing the transmission of the 32-bit present position data plus the 6-bit check data.
c) The data are transmitted by ABS (bit0, bit1).

DVP-PLC Application Manual

9-25

9 Application Instructions API 150-199
SERVO ON

SON

ABS data
transmission mode ABSM
Transmission data
is ready

AMP output

TLC

ABS request

ABSR

ABS(bit 1)

ZSP

AMP output

D01

AMP output

ABS(bit 0)

Controller output

32-bit present value position data
+(plus) 6-bit check data

3.

This instruction is applicable to the Servo motor equipped with absolute positioning function, e.g. Mitsubishi
MR-J2-A Servo drive.

4.

Select one of the following methods for the initial reading of present absolute position.
a) Complete zero point return by using reset signal function to execute API 156 ZRN instruction.
b) After using JOG or manual operation to adjust the zero point position, input a reset signal in SERVO AMP.
See the figure of external switch below for whether to use DVP-PLC for output. For the wiring of DVP-PLC
and Mitsubishi MR-H2-□A, see remarks of API 159 DRVA instruction.
Ex: Mitsubishi MR-J2-

reset

5.

CR

8

SG

10

A

Flags explanation:
M1010:

(For EH/EH2/SV/EH3/SV2 series MPU) When M1010 is On, CH0 (Y0, Y1) and CH1 (Y2, Y3) will
output pulses while END instruction is being executed. When the output starts, M1010 will
automatically turn Off.

M1029:

(For EH/EH2/SV/EH3/SV2 series MPU) When the first group CH0 (Y0, Y1) pulse output or the
execution of other relevant instructions are completed, M1029 will turn On.

M1030:

(For EH/EH2/SV/EH3/SV2 series MPU) When the second group CH1 (Y2, Y3) pulse output is
completed, M1030 will turn on.

M1102:

(For SC series MPU) When the first group CH0 (Y10) pulse output is completed, M1102 will turn On.

M1103:

(For SC series MPU) When the second group CH1 (Y11) pulse output is completed, M1103 will turn
On.

M1258:

(For EH/EH2/SV/EH3/SV2 series MPU) When M1258 is On, CH0 (Y0, Y1) will output reverse pulses.

M1259:

(For EH/EH2/SV/EH3/SV2 series MPU) When M1259 is On, CH1 (Y2, Y3) will output reverse pulses.

M1305:

(For EH/EH2/SV/EH3/SV2 series MPU) PLSV, DPLSV, DRVI, DDRVI, DRVA, DDRVA instructions
for CH0 (Y1, Y2) reverse running.

9-26

DVP-PLC Application Manual

9 Application Instructions API 150-199
M1306:

(For EH/EH2/SV/EH3/SV2 series MPU) PLSV, DPLSV, DRVI, DDRVI, DRVA, DDRVA instructions
for CH1 (Y2, Y3) reverse running.

M1334:

(For EH series MPU) When M1334 = On, CH0 (Y0, Y1) pulse output will pause.
(For EH/EH2/SV/EH3/SV2 series MPU) When M1334 = On, CH0 (Y0, Y1) pulse output will stop.
(For SC series MPU) When M1334 = On, the DDRVI and DDRVA execution criteria will stop and CH0
(Y10) pulse output will stop immediately without deceleration.

M1335:

(For EH series MPU) When M1335 = On, CH1 (Y2, Y3) pulse output will pause.
(For EH/EH2/SV/EH3/SV2 series MPU) When M1335 = On, CH1 (Y2, Y3) pulse output will stop.
(For SC series MPU) When M1335 = On, DDRVI and DDRVA execution criteria will stop and CH1
(Y11) pulse output will stop immediately without deceleration.

6.

M1520:

(For EH/EH2/SV/EH3/SV2 series MPU) When M1520 = On, CH2 (Y4, Y5) pulse output will stop.

M1521:

(For EH/EH2/SV/EH3/SV2 series MPU) When M1521 = On, CH3 (Y6, Y7) pulse output will stop.

M1336:

(For EH/EH2/SV/EH3/SV2 series MPU) CH0 (Y0, Y1) pulse output indication flag

M1337:

(For EH/EH2/SV/EH3/SV2 series MPU) CH1 (Y2, Y3) pulse output indication flag

M1346:

(For EH/EH2/SV/EH3/SV2 series MPU) ZRN instruction for “enabling CLEAR output signal” flag

Special registers:
D1337, D1336:

1. (For EH/EH2/SV/EH3/SV2 series MPU) Registers for the first group (Y0, Y1) output pulse
present value of position control instructions (API 156 ZRN, API 157 PLSV, API 158
DRVI, API 159 DRVA). The present value increases or decreases according to the
corresponding rotation direction. D1337 is for high word; D1336 is for low word.
2. (For EH/EH2/SV/EH3/SV2 series MPU) Registers for storing the current number of output
pulses of the first group (Y0, Y1) output of pulse output instructions (API 57 PLSY, API 59
PLSR). D1337 is for high word; D1336 is for low word.

D1338, D1339:

1. (For EH/EH2/SV/EH3/SV2 series MPU) Registers for the second group (Y2, Y3) output
pulse present value of position control instructions (API 156 ZRN, API 157 PLSV, API 158
DRVI, API 159 DRVA). The present value increases or decreases according to the
corresponding rotation direction. D1339 is for high word; D1338 is for low word.
2. (For EH/EH2/SV/EH3/SV2 series MPU) Registers for storing the current number of output
pulses of the second group (Y2, Y3) output of pulse output instructions (API 57 PLSY, API
59 PLSR). D1339 is for high word; D1338 is for low word.

D1340 (D1352):

For setting up the frequencies of the first acceleration segment and the last deceleration
segment when the position control instructions (API 156 ZRN, API 158 DRVI, API 159
DRVA) are executing CH0 (CH1) outputs.
Range of setting:
For EH/EH2/SV/EH3/SV2 series MPU, the speed has to be higher than 10Hz. Frequency
lower than 10Hz or higher than maximum output frequency will be output by 10Hz. The
default setting in EH/EH2/SV series MPU is 200Hz. For SC series MPU, the speed has to be
100 ~ 100kHz. Frequency lower than 100Hz will be output by 100Hz and frequency higher
than 100kHz will be output by 100kHz. The default setting in SC series MPU is 100Hz.

DVP-PLC Application Manual

9-27

9 Application Instructions API 150-199
Note: During the control of the stepping motor, please consider the resonance and the
limitation on the start frequency when you set up the speed.
D1341, D1342:

(For EH/EH2/SV/EH3/SV2 series MPU) For setting up the maximum speed when the
position control instructions (API 156 ZRN, API 158 DRVI, API 159 DRVA) are being
executed. D1342 is for high word; D1341 is for low word.
Range of setting: 200kHz fixed.

D1343 (D1353):

For setting up the time of the first acceleration segment and the last deceleration segment
when the position control instructions (API 156 ZRN, API 158 DRVI, API 159 DRVA) are
executing CH0 (CH1) outputs.
Range of setting:
For EH/EH2/SV/EH3/SV2 series MPU, the acceleration/deceleration time has to be 1 ~
10,000ms. The time longer than 10,000ms will be output by the default 100ms. For SC
series MPU, the time has to be 50 ~ 20,000ms. The time shorter than 50ms will be regarded
as 50ms.
Note: During the control of the stepping motor, please consider the resonance and the
limitation on the start frequency when you set up the speed.

D1348, D1349:

(For SC series MPU) Registers for the first group (Y0, Y1) output pulse present value of
position control instructions (API 156 ZRN, API 158 DRVI, API 159 DRVA). The present
value increases or decreases according to the corresponding rotation direction. D1349 is for
high word; D1348 is for low word.

D1350, D1351:

(For SC series MPU) Registers for the second group (Y11) output pulse present value of
position control instructions (API 156 ZRN, API 158 DRVI, API 159 DRVA). The present
value increases or decreases according to the corresponding rotation direction. D1351 is for
high word; D1350 is for low word.

9-28

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

156

D

Operands

Function
Zero Return

ZRN

Type
OP

Bit Devices

Word Devices

X

Y

M

S

*

*
*

*

*

S1
S2
S3
D

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F ZRN: 9 steps
* DZRN: 17 steps
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Zero return speed

S2: Creep speed

S3: Near p oint signal (DOG)

D: Pulse output device (please use

transistor output module)
Explanations:
1.

When S1 and S2 are used in device F, only 16-bit instruction is applicable.

2.

S1 and S2 of SC series MPU only support device K, H and D. S3 of SC series MPU only supports device X10
and X11.

3.

Flag: see remarks of API 155 ABSR and API 158 DDRVI for more details.

4.

S1 is the starting speed of zero return operation. For EH2/SV/EH3/SV2 series MPU, the 16-bit instruction can
designate the range of the speed, which is 10 ~ 32,767Hz and the range designated by the 32-bit instruction is
10 ~ 200,000Hz. If the designated speed is slower than 10Hz, the zero return will operate at 10Hz and when
the designated speed is faster than 200kHz, the zero return will operate at 200kHz. For SC series MPU, the
32-bit instruction can designate the range of speed , which is 100 ~ 100,000Hz. If the designated speed is
slower than 100Hz, the zero return will operate at 100Hz, and when the designated speed is faster than
100kHz, the zero return will operate at 100kHz.

5.

S2 is the designated low speed after the near point signal (DOG) is On. EH2/SV/EH3/SV2 series MPU can
designate the range of S2, which is 10 ~ 32,767Hz and SC series MPU can designate the range 100 ~
100,000Hz.

6.

S3 is the designated near point signal (DOG) input (input from A contact). In EH2/SV/EH3/SV2 series MPU, if
devices other than the external output device (X10 ~ X17), e.g. X, Y, M, S are designated, they will be affected
by the scan period, resulting in dispersion of the zero point. In addition, please note that the MPU cannot
designate the same input points X10 ~ X17 as those designated by DCNT and PWD instructions. SC series
MPU can only designate X10 and X11 and cannot designate the same input points as those designated by
DCNT instruction.

7.

EH series MPU has two groups of A/B phase pulse output, CH0 (Y0, Y1) and CH1 (Y2, Y3); EH2/SV/EH3/SV2
series MPU has four groups of A/B phase pulse output, CH0 (Y0, Y1), CH1 (Y2, Y3), CH2 (Y4, Y5) and CH3
(Y6, Y7). See remarks for the setup methods.

8.

Zero return output device in different models:
Model
Zero return output

DVP-PLC Application Manual

SC MPU
Y10, Y11

EH MPU
Y0, Y2

EH2/SV/EH3/SV2 MPU
Y0, Y2, Y4, Y6
9-29

9 Application Instructions API 150-199
9.

EH3/SV2: The instruction DZRN can be used to detect the limit switch, nake the pulsed output stop at the
positive position, search for the Z phase, and output a certain number of displacement. Therefore, when the
instrcution is writtem, the input number of the DOG point should be consisten with the description in the table
below.
Output point number (D)

Y0

Y2

Y4

Y6

Corresponding output point number

Y1

Y3

Y5

Y7

DOG point number (S3)

X2

X6

X12

X16

Disabling the left limit

M1570=On

M1571=On

M1572=On

M1573=On

Left limit input point

X3

X7

X13

X17

Stopping at the right side of DOG

M1574=On

M1575=On

M1576=On

M1577=On

X1

X5

X11

X15

Z phase number
Searching for

The number of times

the Z phase
(M1578=Off)

the Z phase is

Positive value: Searching for the Z phase in the positive direction

searched for is

Negative value: Searching for the Z phase in the negative direction

stored in D1312.
Number of

The number of

displacement

displacement is

Positive value: The pulse output is in the positive direction

stored in D1312.

(M1578=On)

Negative value: The pulse output is in the negative direction

Clearing the output (M1346=On)

Y10

Y11

Y12

Y13

10. When executing API 158 DRVI (releative positioning) or API 159 DRVA (absolute positioning), PLC will
automatically store the increasing or decreasing forward/reverse pulses in the present value registers. For
EH2/SV/EH3/SV2 series MPU, Y0: D1337, D1336; Y2: D1339, D1338, Y4: D1376, D1375; Y6: D1378, D1377.
For SC series MPU, Y10: D1348, D1349; Y11: D1350, D1351. In this way, you can keep track of the position of
the machine at any time. However, due to that the data will be lost when the power of the PLC is switched off,
you have to enter the zero point position of the machine when executing zero return for the first time.
Program Example:
When M10= On, Y0 output pulses start to operate zero return at the frequency of 20kHz. When the zero return meets
DOG X15 = On, Y0 output pulses will start to operate by creep speed 1kHz until X15 is Off.
M10
ZRN

K20000

K1000

X15

Y0

Remarks:
1.

Timing chart of the reset signal output for EH2/SV/EH3/SV2 series MPU. (SC series MPU does not support this
function.)
a) When the reset signal flag M1346 = On, after zero return is completed, the PLC can send the reset signal to

9-30

DVP-PLC Application Manual

9 Application Instructions API 150-199
the servo drive and the signal will last for approximately 20ms. After 20ms, the reset signal will return to Off
again.
b) Output devices for reset signals of EH2/SV/EH3/SV2 series MPU:
CH0 (Y0, Y1) reset output device (Y10)
CH1 (Y2, Y3) reset output device (Y11)
CH2 (Y4, Y5) reset output device (Y12)
CH3 (Y6, Y7) reset output device (Y13)

Zero return speed
Scan in circle

On

Creep speed

Program interrupt

DOG ON

Output near point signal (DOG)

Off
Reset signal

Inside 1 ms

Reset signal Y4 or Y5

Greater than 20ms

On
Off

M1336, M1337
Pulse output monitor

Note: The designated devices, X, Y, M, and S, other than the external input devices X10 ~ X17 will be affected
by the scan period, 2 times of the scan period at worst.
2.

The zero return operation:
a) When ZRN instruction is executed, the frequency of the first acceleration segment of CH0 (CH1) in
EH2/SV/EH3/SV2 series MPU is set by D1340 (D1352). In SC series MPU, CH0 (CH1) will set creep speed
as the start frequency. The acceleration time of EH2/SV/EH3/SV2/SC series MPU is set by D1343 (D1353).
S1 will start to move when the acceleration reaches the zero return speed.
b) When the DOG signal goes from Off to On, the zero return speed will decelerate to S2 by the time set in
D1343 (D1353).
c) When the DOG signal goes from On to Off and the pulse output stops, 0 will be written in the present value
registers (D1337, D1336) of CH0 pulses, D1339 and D1338 of CH1 pulses, D1375 and D1376 of CH2 pulses,
and D1377 and D1378 of CH3 pulses in EH2/SV/EH3/SV2 series MPU; 0 will also be written in D1348 and
D1349 of Y10 (CH0) pulses or D1350 and D1351 of Y11 (CH1) pulses in SC series MPU.
d) When the DOG signal goes from On to Off and the reset signal flag M1346 = On, Y4 (CH0) or Y5 (CH1) in EH
series MPU will output a reset signal; Y10 (CH0), Y11 (CH1) , Y12 (CH2) and Y13 (CH3) in EH2/SV/EH3/SV2
series MPU will output a reset signal.
e) For EH2/SV/EH3/SV2 series MPU, when the pulse output is completed and M1029, M1030, M1036 and
M1037 are enabled, indication flag M1336 sent by CH0 pulses, M1337 by CH1, M1522 by CH2 and M1523
by CH3 will be Off. For SC series MPU, when the pulse output is completed, M1102 and M1103 will be
enabled.

DVP-PLC Application Manual

9-31

9 Application Instructions API 150-199
f) Due to that ZRN (DZRN) instruction cannot locate the position of DOG, the zero return can only be done
towards a single direction. In the zero return operation of EH2/SV/EH3/SV2 series MPU, D1337 and D1336
(present value registers) of CH0 pulses or D1339 and D1338 of CH1 pulses are decreasing. In the zero return
operation of SC series MPU, D1348 and D1349 of CH0 pulses or D1350 and D1351 of CH1 pulses are also
decreasing.
Frequency
S 3 near point signal =On
Target
frequency
(S 1)
End frequency (S 2)
Start
frequency
(S 2)
time
Enabling
the
instruction

S3
near point signal =Off

accel/decel. time
D1343
acceleration

deceleration

g) ZRN (DZRN) instruction is applicable to servo motor with absolute positioning function, e.g. Mitsubishi
MR-J2-A servo drive. Even when the power is switched off, the current position can still be recorded. In
addition, the current position of servo drive can be read by API 155 DABSR of EH2/SV/EH3/SV2/SC series
MPU; therefore only one zero return operation is required and no zero return has to be done after the power is
switched off.
h) When the drive contact of ZRN instruction is On, CH0 (CH1) will read the acceleration/deceleration time set in
D1343 (D1353) and accelerate to the zero return speed, waiting for the DOG and decelerate to creep speed.
When the DOG is Off, the pulse output will stop immediately.
i) For SC series MPU, many ZRN instructions can be compiled in the program but only one instruction can be
executed when the PLC program is being executed. For example, provided there is already an instruction
enabling Y10 output, other instructions enabling also Y10 output will not be executed. The principle of the
instruction execution is “first come, first executed”.
j) For SC series MPU, when you designate Y10 as the output device, you can choose either X10 or X11 for
DOG input in the “acceleration to deceleration” segment. In other words, when designating Y11 as the output
device, you can also choose either X10 or X11 for DOG input.
k) For SC series MPU, due to that this instruction does not compare between the number of output pulses, the
DOG input (from Off to On) will therefore become the trigger of acceleration converting to deceleration. The
“On” time of DOG has to be longer than 10us; otherwise the signal may be regarded as useless interference.
l) For SC series MPU, when the execution of the instrucion enters the deceleration segment and the output
frequency reaches creep speed (end frequency), the output will stop when DOG goes from On to Off.
m) For SC series MPU, the current accumulated number of pulses of Y10 is stored in D1348 and D1349 and that
of Y11 is stored in D1350 and D1351. Then the program operates from STOP to RUN or from RUN to STOP,

9-32

DVP-PLC Application Manual

9 Application Instructions API 150-199
the contents will not be cleared to 0.
n) For SC series MPU, M1102 = On indicates the end of Y10 pulse output; M1103 = On indicates the end of Y11
pulse output.
o) For SC series MPU, after the instruction is executed, all parameters cannot be modified unless the execution
of the instruction stops.
p) For SC series MPU, when the execution of the stops, all outputs will stop immediately no matter what type of
the output it is.

DVP-PLC Application Manual

9-33

9 Application Instructions API 150-199
API

Mnemonic

157

D

Operands

Adjustable Speed Pulse Output

PLSV

Type

Bit Devices
X

OP

Function

Word Devices

Y

M

S

*
*

*

*

S
D1
D2

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*

Program Steps
C
*

D
*

E
*

F PLSV: 7 steps
* DPLSV: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Pulse output frequency

D1: Pulse output device (please use transistor output module)

D2: Output device for

the signal of rotation direction
Explanations:
1.

See remarks for the setting range of S, D1 and D2.

2.

Flag: see remarks of API 155 ABSR and API 158 DDRVI for more details.

3.

S is the designated pulse output frequency. The 16-bit instruction can designate its range 0 ~ +32,767Hz, 0 ~
-32,768Hz. The ranges designated by 32-bit instruction are 0 ~ +200,000Hz and 0 ~ -200,000Hz. “+/-” signs
indicate forward/backward directions. During the pulse output, the frequency can be changed, but not the
frequencies of different directions.

4.

D1 is the pulse output device. EH series MPU can designate Y0 and Y2 and EH2/SV/EH3/SV2 series MPU can
designate Y0, Y2, Y4 and Y6.

5.

The operation of D2 corresponds to the “+” or “-“ of S. When S is “+”, D2 will be On; when S is “-“, D2 will be Off.

6.

PLSV instruction does not have settings for acceleration and deceleration. Please use API 67 RAMP for the
acceleration and deceleration of pulse output frequency.

7.

During the pulse output executed by PLSV instruction, the drive contact turning Off will result in the immediate
stop of the output without going through a deceleration.

8.

When the absolute value of the input frequency during the execution of DPLSV is bigger than 200kHz, the
output will operate at 200kHz.

9.

For EH/EH2/SV/EH3/SV2 series MPU, D1222, D1223, D1383 and D1384 are the time differences sent
between the direction setup signal and pulse output points of CH0, CH1, CH2 and CH3.

10. For EH/EH2/SV/EH3/SV2 series MPU, M1305, M1306, M1532 and M1533 are the flags of the direction signals
of CH0, CH1, CH2 and CH3. When S is “+”, the output will operate towards a forward direction and the flag will
go Off. When S is “-“, the output will operate towards a backward direction and the flag will go On.
Program Example:
When M10 = On, Y0 will output pulses at 20kHz. Y5 = On indicates forward pulses.
M10
PLSV

9-34

K20000

Y0

Y5

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

158

D

Function
Drive to Increment

DRVI

Type

Bit Devices
X

OP

Operands

S1
S2
D1
D2

Word Devices

Y

M

S

*
*

*

*

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F DRVI: 9 steps
* DDRVI: 17 steps
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Number of output pulses (relative designation)
use transistor output module)

S2: Pulse output frequency

D1: Pulse output device (please

D2: Output device for the signal of rotation direction

Explanations:
1.

See remarks for the setting range of S1, S2, D1 and D2.

2.

S1 and S2 of SC series MPU only support device K, H and D.

3.

Flag: see remarks for more details.

4.

S1 is the number of output pulses (relative designation). For EH/EH2/SV/EH3/SV2 series MPU, the 16-bit
instruction can designate the range -32,768 ~ +32,767. The range designated by 32-bit instruction is
-2,147,483,648 ~ +2,147,483,647. For SC series MPU, the 32-bit instruction can designate the range
-2,147,483,648 ~ +2,147,483,647. “+/-” signs indicate forward/backward directions.

5.

S2 is the designated pulse output frequency. For EH/EH2/SV/EH3/SV2 series MPU, the 16-bit instruction can
designate its range 10 ~ 32,767Hz. The range designated by 32-bit instruction is 10 ~ 200,000Hz. For SC
series MPU, the 32-bit instruction can designate the range 100 ~ 100,000Hz.

6.

EH series MPU has two groups of A/B phase pulse output, CH0 (Y0, Y1) and CH1 (Y2, Y3). EH2/SV/EH3/SV2
series MPU has four groups of A/B phase pulse output, CH0 (Y0, Y1), CH1 (Y2, Y3), CH2 (Y4, Y5) and CH3
(Y6, Y7). See remarks for the setup methods.

7.

Pulse output device D1 in different models
Model
Pulse output end

8.

SC MPU
Y10, Y11

EH MPU
Y0, Y2

EH2/SV/EH3/SV2 MPU
Y0, Y2, Y4, Y6

The operation of D2 corresponds to the “+” or “-“ of S1. When S1 is “+”, D2 will be On; when S1 is “-“, D2 will be
Off. D2 will not be Off immediately after the pulse output is over; it will be Off only when the drive contact of the
instruction turns Off.

9.

For EH/EH2/SV/EH3/SV2 series MPU, S1 is
- The 32-bit data stored in the present value registers D1337 (high word) and D1336 (low word) of CH0 (Y0,
Y1).
- The 32-bit data stored in the present value registers D1339 (high word) and D1338 (low word) of CH1 (Y2,
Y3).
- The 32-bit data stored in the present value registers D1376 (high word) and D1375 (low word) of CH2 (Y4,
Y5).

DVP-PLC Application Manual

9-35

9 Application Instructions API 150-199
- The 32-bit data stored in the present value registers D1378 (high word) and D1377 (low word) of CH3 (Y5,
Y6).
- When in backward direction, the content in the present value register will decrease.
10. For SC series MPU, S1 is the 32-bit data stored in the present value registers D1348 (low word) and D1349
(high word) of CH0 (Y10) or the 32-bit data stored in the present value registers D1350 (low word) and D1351
(high word) of CH1 (Y11). When in backward direction, the content in the present value register will decrease.
When the program goes from STOP to RUN or from RUN to STOP, the content in the present value register
will remain unchanged.
11. When DRVI instruction is executing pulse output, you cannot change the content of all operands. The changes
will be valid next time when DRVI instruction is enabled.
12. For EH/EH2/SV/EH3/SV2 series MPU, when the drive contact of DRVI instruction is Off, even the indication
flag M1336 sent by CH0 pulses, M1337 sent by CH1 pulses, M1522 sent by CH2 pulses and M1523 sent by
CH3 pulses are “On”, DRVI instruction will not be driven again.
13. When the absolute value of the input frequency of DDRVI insturction in EH/EH2/SV/EH3/SV2 series MPU is
larger than 200kHz, the output will be operated at 200kHz. When the absolute value of the input frequency is
smaller than 10Hz, the output will be operated at 10Hz.
14. D1343 (D1353) is for setting up the time of the first acceleartion segment and last deceleration segment of
CH0 (CH1). The acceleration and deceleration time of EH/EH2/SV/EH3/SV2 series MPU is 1 ~ 10,000ms. The
output will be operated for the default 100ms if the time is longer than 10,000ms. The time range for SC series
MPU is 50 ~ 20,000ms. The output will be operated for 20,000ms or 50ms if the time set is longer than
20,000ms or shorter than 50ms.
15. D1340 (D1352) is for setting up the start/end frequency of Y10 (Y11). If S2 is less than or equals start/end
frequency, the pulse output frequency will be executed by the start/end frequency.
16. For EH/EH2/SV/EH3/SV2 series MPU, M1305 (M1306) is the direction signal of CH0 (CH1). When S1 is a
positive number, the output will be operated in a forward direction and M1305 (M1306) will be Off. When S1 is
a negative number, the output will be operated in a backward direction and M1305 (M1306) will be On.
Program Example:
When M10= On, Y0 will output 20,000 pulses (relative designation) at 2kHz. Y5 = On indicates the pulses are
executed in forward direction.
M10
DRVI

K20000

K2000

Y0

Y5

Remarks:
1.

Explanations on EH/EH2/SV/EH3/SV2 series MPU:
a) Relative position control: Designating the traveling distance starting from the current position by “+/ -“ signs;
also known as a relative driving method.

9-36

DVP-PLC Application Manual

9 Application Instructions API 150-199
+3,000

0

F0 the first acceleration
The last deceleration
segment
segment
(D1340) Min: 10Hz

Current
position
-3,000

b) Settings of relative positioning and the acceleration/deceleration speed:
Acceleration
sampling time

Default: 200,000Hz
Max. speed
(D1342, D1341)

Acceleration
slope
Output pulse
frequency
First acceleration
segment (D1340)
Min: 10Hz

Current
position

2.

Last deceleration
segment (D1340)
Min: 10Hz
Accel/Decel time

Accel/Decel time

Default:100ms
(D1343)

Default: 100ms
(D1343)

Output pulse
numbers

Explanations on SC series MPU:
a) Relative position control: Designating the traveling distance starting from the current position by “+/ -“ signs;
also known as a relative driving method.
+3,000

0

F0 the first acceleration
The last deceleration
segment
segment
Y10 (D1340)
Y11 (D1352) Min: 10Hz

Current
position
-3,000

b) Settings of relative positioning and the acceleration/deceleration speed: D1343 (D1353) is for settings of the
time of the first acceleration segment and last deceleration segment of Y10 (Y11). D1340 (D1352) is for
settings of start/end frequency of Y10 (Y11).

DVP-PLC Application Manual

9-37

9 Application Instructions API 150-199
Acceleration
sampling time

output pulse frequency

Acceleration
slope

The last deceleration
segment
Y10 (D1340)
Y11 (D1352)
Min: 100Hz

The first acceleration
segment
Y10 (D1340)
Y11 (D1352)
Min: 100Hz

Current
position

accel/decel time

accel/decel time

Default: 200ms
Y10 (D1343)
Y11 (D1353)

Default: 200ms
Y10 (D1343)
Y11 (D1353)

Output pulse
numbers

c) Many DRVI instructions can be compiled synchronously in the program, but only one instruction can be
activated whenever the PLC executes the program. For example, if Y10 output has already been activated by
an instruction, other instructions that are also used to activate Y10 output will not be excecuted. Therefore,
the principle of the instruction activation sequence is “first activated, first executed”.
d) When Y10 is activated by DDRVI instruction, the output function of Y10 will be disabled until DDRVI is OFF.
The same rule applies to Y11.
e) Once the instruction is activated, all other parameters cannot be modified until the instruction is disabled.
f) When the instruction is disabled but the output has not yet completed:
M1334 = On indicates that Y10 will stop output immediately.
M1334 = Off indicates that Y10 will decelerate according to the deceleration time till it reaches end frequency
and stop the pulse output.
M1335 corresponds to Y11 output and applies the same rule.
3.

Flags for SC series MPU:
M1102:

M1102 = On after Y10 pulse output is completed.

M1103:

M1103 = On after Y11 pulse outout is completed.

M1334:

Y10 pulse output stops immediately without deceleration when the pulse output instruction is
disabled.

M1335:

Y11 pulse output stops immediately without deceleration when the pulse output instruction is
disabled.

4.

9-38

M1347:

For SC (V1.6 and later versions). Auto reset after Y0 output is completed.

M1348:

For SC (V1.6 and later versions). Auto reset after Y1 output is completed.

M1524:

For SC (V1.6 and later versions). Auto reset after Y10 output is completed.

M1525:

For SC (V1.6 and later versions). Auto reset after Y11 output is completed.

Special registers for SC series MPU:
D1348:

Low word of the current number of Y10 output pulses.

D1349:

High word of the current number of Y10 output pulses.

D1350:

Low word of the current number of Y11 output pulses.

D1351:

High word of the current number of Y11 output pulses..

D1340:

Settings of the first start frequency and the last end frequency of Y10 output pulses.
DVP-PLC Application Manual

9 Application Instructions API 150-199

5.

D1352:

Settings of the first start frequency and the last end frequency of Y11 output pulses.

D1343:

Settings of the acceleration/deceleration time of Y10 output pulses.

D1353:

Settings of the acceleration/deceleration time of Y11 output pulses.

Flags for EH/EH2/SV/EH3/SV2 series MPU:
M1010:

For EH/EH2/SV/EH3/SV2, when M1010 = On, CH0, CH1, CH2 and CH3 will output pulses
when END instruction is being executed. M1010 will be Off automatically when the output
starts.

M1029:

For EH/EH2/SV/EH3/SV2, M1029 = On after CH0 pulse output is completed.

M1030:

For EH/EH2/SV/EH3/SV2, M1030 = On after CH1 pulse output is completed.

M1036:

For EH2/SV/EH3/SV2, M1036 = On after CH2 pulse output is completed.

M1037:

For EH2/SV/EH3/SV2, M1037 = On after CH3 pulse output is completed.

M1119

For EH2/SV/EH3/SV2, the instruction DDRVI/DDRVA is enabled when M1119 is On.

M1257

For EH/EH2/SV/EH3/SV2, the acceleration/deceleration of high-speed outputs Y0 and Y2 are
S curves when M1257 is On.

M1305:

For EH/EH2/SV/EH3/SV2, direction signal of CH0.

M1306:

For EH/EH2/SV/EH3/SV2, direction signal of CH1.

M1334:

For EH, CH0 pulse output pauses.
For EH2/SV/EH3/SV2, CH0 pulse output stops.

M1308

For EH/EH2/SV/EH3/SV2,
Off->On: The first high-speed pulse output CH0 (Y0, Y1) pauses immediately.
On->Off: Continuing to output the pulses which have not been output

M1309

For EH/EH2/SV/EH3/SV2,
Off->On: The first high-speed pulse output CH1 (Y2, Y3) pauses immediately.
On->Off: Continuing to output the pulses which have not been output

M1310

For EH/EH2/SV/EH3/SV2,
Off->On: The first high-speed pulse output CH2 (Y4, Y5) pauses immediately.
On->Off: Continuing to output the pulses which have not been output

M1311

For EH/EH2/SV/EH3/SV2,
Off->On: The first high-speed pulse output CH3 (Y6, Y7) pauses immediately.
On->Off: Continuing to output the pulses which have not been output

M1335:

For EH, CH1 pulse output pauses.
For EH2/SV/EH3/SV2, CH1 pulse output stops.

M1336:

For EH/EH2/SV/EH3/SV2, “CH0 sends out pulses” indication.

M1337:

For EH/EH2/SV/EH3/SV2, “CH1 sends out pulses” indication.

M1347:

For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH0 pulse output.

M1348:

For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH1 pulse output.

M1520:

For EH2/SV/EH3/SV2, CH2 pulse output stops.

M1521:

For EH2/SV/EH3/SV2, CH3 pulse output stops.

M1522:

For EH2/SV/EH3/SV2, “CH2 sends out pulses” indication.

DVP-PLC Application Manual

9-39

9 Application Instructions API 150-199

6.

M1523:

For EH2/SV/EH3/SV2, “CH3 sends out pulses” indication.

M1524:

For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH2 pulse output.

M1525:

For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH3 pulse output.

M1534:

For EH2/SV/EH3/SV2, designated deceleration time of CH0 (should be used with D1348).

M1535:

For EH2/SV/EH3/SV2, designated deceleration time of CH1 (should be used with D1349).

M1536:

For EH2/SV/EH3/SV2, designated deceleration time of CH2 (should be used with D1350).

M1537:

For EH2/SV/EH3/SV2, designated deceleration time of CH3 (should be used with D1351).

M1532:

For EH2/SV/EH3/SV2, direction signal of CH2.

M1533:

For EH2/SV/EH3/SV2, direction signal of CH3.

Special registers for EH/EH2/SV/EH3/SV2 series MPU:
D1127:

For EH2/SV/EH3/SV2, the number of pulses in the acceleration section in the position
instruction (low word)

D1128:

For EH2/SV/EH3/SV2, the number of pulses in the acceleration section in the position
instruction (high word)

D1133:

For EH2/SV/EH3/SV2, the number of pulses in the deceleration section in the position
instruction (low word)

D1134:

For EH2/SV/EH3/SV2, the number of pulses in the deceleration section in the position
instruction (high word)

D1220:

For EH/EH2/SV/EH3/SV2, phase setting of CH0 (Y0, Y1): D1220 determines the phase by

D1221:

the last two bits; other bits are invalid.
1. K0: Y0 output
2. K1: Y0, Y1 AB-phase output; A ahead of B.
3. K2: Y0, Y1 AB-phase output; B ahead of A.
4. K3: Y1 output
For EH/EH2/SV/EH3/SV2, phase setting of CH1 (Y2, Y3): D1221 determines the phase by

D1222:

the last two bits; other bits are invalid.
1. K0: Y2 output
2. K1: Y2, Y3 AB-phase output; A ahead of B.
3. K2: Y2, Y3 AB-phase output; B ahead of A.
4. K3: Y3 output
For EH/EH2/SV/EH3/SV2, the time difference between the direction signal and pulse output
sent by CH0.

D1223:

For EH/EH2/SV/EH3/SV2, the time difference between the direction signal and pulse output
sent by CH1.

D1229:

For EH2/SV/EH3/SV2, phase setting of CH2 (Y4, Y5): D1229 determines the phase by the

D1230:

last two bits; other bits are invalid.
1. K0: Y4 output
2. K1: Y4, Y5 AB-phase output; A ahead of B.
3. K2: Y4, Y5 AB-phase output; B ahead of A.
4. K3: Y5 output
For EH2/SV/EH3/SV2, phase setting of CH3 (Y6, Y7): D1230 determines the phase by the
last two bits; other bits are invalid.
1. K0: Y6 output
2. K1: Y6, Y7 AB-phase output; A ahead of B.
3. K2: Y6, Y7 AB-phase output; B ahead of A.

9-40

DVP-PLC Application Manual

9 Application Instructions API 150-199
D1336:

4. K3: Y7 output
For EH/EH2/SV/EH3/SV2, low word of the current number of output pulses from CH0.

D1337:

For EH/EH2/SV/EH3/SV2, high word of the current number of output pulses from CH0.

D1338:

For EH/EH2/SV/EH3/SV2, low word of the current number of output pulses from CH1.

D1339:

For EH/EH2/SV/EH3/SV2, high word of the current number of output pulses from CH1.

D1340:

For EH/EH2/SV/EH3/SV2, settings of the first start frequency and the last end frequency of
CH0.

D1343:

For EH/EH2/SV/EH3/SV2, settings of acceleration/deceleration time for CH0 pulse output.

D1348:

For EH2/SV/EH3/SV2, deceleration time for CH0 pulse output when M1534 = On.

D1349:

For EH2/SV, deceleration time for CH1 pulse output when M1535 = On.

D1350:

For EH2/SV, deceleration time for CH2 pulse output when M1536 = On.

D1351:

For EH2/SV, deceleration time for CH3 pulse output when M1537 = On.

D1352:

For EH/EH2/SV/EH3/SV2, settings of the first start frequency and the last end frequency of
CH1.

D1353:

For EH/EH2/SV/EH3/SV2, settings of acceleration/deceleration time for CH1 pulse output.

D1375:

For EH2/SV/EH3/SV2, low word of the current number of output pulses from CH2.

D1376:

For EH2/SV/EH3/SV2, high word of the current number of output pulses from CH2.

D1377:

For EH2/SV/EH3/SV2, low word of the current number of output pulses from CH3.

D1378:

For EH2/SV/EH3/SV2, high word of the current number of output pulses from CH3.

D1379:

For EH2/SV/EH3/SV2, settings of the first start frequency and the last end frequency of CH2.

D1380:

For EH2/SV/EH3/SV2, settings of the first start frequency and the last end frequency of CH3.

D1381:

For EH2/SV/EH3/SV2, settings of acceleration/deceleration time for CH2 pulse output.

D1382:

For EH2/SV/EH3/SV2, settings of acceleration/deceleration time for CH3 pulse output.

D1383:

For EH2/SV/EH3/SV2, the time difference between the direction signal and pulse output sent
by CH2.

D1384:

For EH2/SV/EH3/SV2, the time difference between the direction signal and pulse output sent
by CH3.

DVP-PLC Application Manual

9-41

9 Application Instructions API 150-199
API

Mnemonic

159

D

Operands

Function
Drive to Absolute

DRVA

Type

Bit Devices
X

OP
S1
S2
D1
D2

Word Devices

Y

M

S

*
*

*

*

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F DRVA: 9 steps
* DDRVA: 17 steps
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Number of output pulses (absolute designation)
(please use transistor output module)

S2: Pulse output frequency

D1: Pulse output device

D2: Output device for the signal of rotation direction

Explanations:
1.

See remarks for the setting range of S1, S2, D1 and D2.

2.

S1 and S2 of SC series MPU only support device K, H and D.

3.

Flag: see remarks of API 158 DRVI for more details.

4.

S1 is the number of output pulses (absolute designation). For EH/EH2/SV/EH3/SV2 series MPU, the 16-bit
instruction can designate the range -32,768 ~ +32,767. The range designated by 32-bit instruction is
-2,147,483,648 ~ +2,147,483,647. For SC series MPU, the 32-bit instruction can designate the range
-2,147,483,648 ~ +2,147,483,647. “+/-” signs indicate forward/backward directions.

5.

S2 is the designated pulse output frequency. For EH/EH2/SV/EH3/SV2 series MPU, the 16-bit instruction can
designate its range 10 ~ 32,767Hz. The range designated by 32-bit instruction is 10 ~ 200,000Hz. For SC
series MPU, the 32-bit instruction can designate the range 100 ~ 100,000Hz.

6.

EH series MPU has two groups of A/B phase pulse output, CH0 (Y0, Y1) and CH1 (Y2, Y3). EH2/SV series
MPU has four groups of A/B phase pulse output, CH0 (Y0, Y1), CH1 (Y2, Y3), CH2 (Y4, Y5) and CH3 (Y6, Y7).
See remarks for the setup methods.

7.

Pulse output device D1 in different models
Model
Pulse output end

8.

SC MPU
Y10, Y11

EH/EH2/SV/EH3/SV2 MPU
Y0, Y2

When S1 is larger than the current relative position, D2 will be Off; when S1 is smaller than the current relative
position, D2 will be On. D2 will not be Off immediately after the pulse output is over; it will be Off only when the
drive contact of the instruction turns Off.

9.

For EH/EH2/SV/EH3/SV2 series MPU, S1 is
- The 32-bit data stored in the present value registers D1337 (high word) and D1336 (low word) of CH0 (Y0,
Y1).
- The 32-bit data stored in the present value registers D1339 (high word) and D1338 (low word) of CH1 (Y2,
Y3).
- The 32-bit data stored in the present value registers D1376 (high word) and D1375 (low word) of CH2 (Y4,
Y5).

9-42

DVP-PLC Application Manual

9 Application Instructions API 150-199
- The 32-bit data stored in the present value registers D1378 (high word) and D1377 (low word) of CH3 (Y5,
Y6).
When in backward direction, the content in the present value register will decrease.
10. For SC series MPU, S1 is the 32-bit data stored in the present value registers D1348 (low word) and D1349
(high word) of CH0 (Y10) or the 32-bit data stored in the present value registers D1350 (low word) and D1351
(high word) of CH1 (Y11). When in backward direction, the content in the present value register will decrease.
When the program goes from STOP to RUN or from RUN to STOP, the content in the present value register
will remain unchanged.
11. For EH/EH2/SV/EH3/SV2 series MPU, when DRVA instruction is executing pulse output, you cannot change
the content of all operands. The changes will be valid next time when DRVA instruction is enabled.
12. For EH/EH2/SV/EH3/SV2 series MPU, when the drive contact of DRVA instruction is Off, the pulse output will
decelerate to stop and M1029 and M1030 will be enabled. For SC series MPU, the pulse output will decelerate
to stop and M1102 and M1103 will be enabled.
13. For EH/EH2/SV/EH3/SV2 series MPU, when the drive contact of DRVA instruction is Off, even the indication
flag M1336 sent by CH0 pulses or M1337 sent by CH1 pulses are “On”, DRVA instruction will not be driven
again.
14. When the absolute value of the input frequency of DRVA and DDRVA insturctions in EH/EH2/SV/EH3/SV2
series MPU is larger than 200kHz, the output will be operated at 200kHz. When the absolute value of the input
frequency is smaller than 10Hz, the output will be operated at 10Hz.
15. D1343 (D1353) is for setting up the time of the first acceleartion segment and last deceleration segment of
CH0 (CH1). The acceleration and deceleration time of EH/EH2/SV/EH3/SV2 series MPU is 1 ~ 10,000ms. The
output will be operated for the default 100ms if the time is longer than 10,000ms. The time range for SC series
MPU is 50 ~ 20,000ms. The output will be operated for 20,000ms or 50ms if the time set is longer than
20,000ms or shorter than 50ms.
16. For EH/EH2/SV/EH3/SV2 series MPU, M1305 (M1306) is the direction signal of CH0 (CH1). When S1 is a
positive number, the output will be operated in a forward direction and M1305 (M1306) will be Off. When S1 is a
negative number, the output will be operated in a backward direction and M1305 (M1306) will be On.
17. D1340 (D1352) is for setting up the start/end frequency of Y10 (Y11). If S2 is less than or equals start/end
frequency, the pulse output frequency will be executed by the start/end frequency.
Program Example:
When M10= On, Y0 will output 20,000 pulses (absolute designation) at 2kHz. Y5 = On indicates the pulses are
executed in forward direction.
M10
DRVA

K20000

K2000

Y0

Y5

Remarks:
1.

Explanations on EH/EH2/SV/EH3/SV2 series MPU:
a) Absolute position control: Designating the traveling distance starting from the zero point (0); also known as a
absolute driving method.

DVP-PLC Application Manual

9-43

9 Application Instructions API 150-199
+3,000

F0 the first acceleration segment
The last deceleration segment
(D1340) Min: 10Hz

0

Target position

Zero point
0

b) Settings of absolute positioning and the acceleration/deceleration speed:
Acceleration
sampling time

Default: 200,000Hz
Max. speed
(D1342, D1341)

Acceleration slope

Output pulse frequency
First acceleration
segment (D1340)
Min: 10Hz

Last deceleration
segment (D1340)
Min: 10Hz

Current
position

2.

T Accel/Decel time

Accel/Decel time

Default: 100ms
(D1343)

Default: 100ms
(D1343)

Output pulse
numbers

Explanations on SC series MPU:
a) Absolute position control: Designating the traveling distance starting from the zero point (0); also known as a
absolute driving method.
+3,000

0

F0 the first acceleration
The last deceleration
segment
segment
Y10 (D1340)
Y11 (D1352) Min: 10Hz

Zero
point
-3,000

b) Settings of absolute positioning and the acceleration/deceleration speed: D1343 (D1353) is for settings of
the time of the first acceleration segment and last deceleration segment of Y10 (Y11). D1340 (D1352) is for
settings of start/end frequency of Y10 (Y11).

9-44

DVP-PLC Application Manual

9 Application Instructions API 150-199
Acceleration
sampling time

Output pulse
frequency

Acceleration
slope

Last deceleration segment
Y10 (D1340)
Y11 (D1352)
Min: 100Hz

First acceleration segment
Y10 (D1340)
Y11 (D1352) Min: 100Hz

Current
position

accel/decel time

accel/decel time

Default: 200ms
Y10 (D1343)
Y11 (D1353)

Default: 200ms
Y10 (D1343)
Y11 (D1353)

Output pulse
numbers

c) Many DRVA instructions can be compiled synchronously in the program, but only one instruction can be
activated whenever the PLC executes the program. For example, if Y10 output has already been activated
by an instruction, other instructions that are also used to activate Y10 output will not be excecuted.
Therefore, the principle of the instruction activation sequence is “first activated, first executed”.
d) When Y10 is activated by DDRVA instruction, the output function of Y10 will be disabled until DDRVAis OFF.
The same rule applies to Y11.
e) Once the instruction is activated, all other parameters cannot be modified until the instruction is disabled.
f)

When the instruction is disabled but the output has not yet completed:
M1334 = On indicates that Y10 will stop output immediately.
M1334 = Off indicates that Y10 will decelerate according to the deceleration time till it reaches end frequency
and stop the pulse output.
M1335 corresponds to Y11 output and applies the same rule.

3.

See remarks of DDRVI instruction for more details on the flags.

4.

Wiring of DVP-EH series and Delta ASDA servo drive:

DVP-PLC Application Manual

9-45

9 Application Instructions API 150-199
Delta Servo Drive

EH MPU
L
220VAC
Single phase

N

220VAC

Servo Motor

ASDA series
R

U

S

DI 1: Servo start

V

T

DI 5: Servo reset

W

DI 6: Forward limit

+24V

DI 7: Reverse limit
DI 8: Emergency stop

S/S
24G

DO_COM

CN1
7

DO1+

6

DO1-

17

5

DO2+

COM+ 11

4

DO2-

CN1

24V

SRDY

X0

Start

X1

Zero return

X2

JOG(+)

DI 1

9

3

DO3+

X3

JOG(-)

DI 5

33

2

DO3-

X4

Stop

DI 6

32

1

DO4+

X5

Error reset

DI 7

31

26 DO4-

X6

Forward limit

DI 8

30

28 DO5+

ALARM

X7

Reverse limit

COM- 45

27 DO5-

DO_COM

X10

SRDY

X11

ZSPD

X12

TPOS

X13

ALARM

VDD

CN1
Differential
signal

X14

50
24

CN2

DI 2

10

COM- 45

C2

VDD
VDD

HOME
TPOS

Encoder

Error
counter

Z-phase signal
(zero point signal)

Clear pulse

Y4

OZ
/OZ

ZSPD

DC24V

Electric
gear

17

PU-HI 35

Approx.

Pulse output
Y0

PLS

41

C0

COM- 47

Y1

SIGN 37

C1

Forward/backward direction
Max. input pulse
frequency: 200kPPS

DVP32EH00T

Note:
(a)

The parameter setting of Delta ASDA servo drive:
P1-01: position mode
P1-00: pulse input type as Pulse+DIR.

5.

9-46

(b)

The forward/reverse limit switch should be connected to SERVO AMP.

(c)

The “clear pulse” signal will clear the current number of pulses left inside the servo.

Wiring of DVP-SC series and Delta ASDA servo drive:

DVP-PLC Application Manual

9 Application Instructions API 150-199
Delta Servo Drive

SC MPU + 16SP

24VDC
0V
S/S

U

S

DI 1: Servo start

V

T

DI 5: Servo reset

W

Forward limit
Reverse limit
DI 8: Emergency stop

24VDC
DO_COM

Servo motor

220VAC

3-phase power

24V

ASDA series
R

CN1
7

DO1+

6

DO1-

17

5

DO2+

COM+ 11

4

DO2-

CN1

24V

SRDY

X0

Start

X1

Zero return

X2

JOG(+)

DI 1

9

3

DO3+

X3

JOG(-)

DI 5

33

2

DO3-

X4

Start

DI 6

32

1

DO4+

X5

Error reset

DI 7

31

26 DO4-

X20

Forward limit

DI 8

30

28 DO5+

ALARM

X21

Reverse limit

COM- 45

27 DO5-

DO_COM

X22

SRDY

X23

ZSPD

X24

TPOS

X25

ALARM

VDD

CN1
Differential
signal

OZ

50

/OZ

24

CN2

DI 2

HOME
TPOS

Encoder

Error
counter

Z-phase signal
(zero point signal)

X26

ZSPD

10

COM- 45

DC24V

Electric
gear

VDD 17
PU-HI 35
Pulse output
Y10

PLS

SIGN 37

Y0
C0

41

COM- 47

C2

Forward/backward direction

Max. input pulse
frequency: 100kPPS

DVP12SC11T+DVP16SP11T

Note:
(a) The parameter setting of Delta ASDA servo drive:
P1-01: position mode
P1-00: pulse input type as Pulse+DIR.
(b) The forward/reverse limit switch should be connected to SERVO AMP.

DVP-PLC Application Manual

9-47

9 Application Instructions API 150-199
6.

Wiring of DVP-EH series PLC and a Mitsubishi MR-J2-□A Servo drive:
Mitsubishi servo drive

EH MPU

N
+24V

CN1B

S/S

VDD

24G

ABS bit 0

X0

ABS bit 1

X1

ABS transmission

X2
X3

V

T

W
24V

3

COM 13
D01

4

ZSP

19

TLC

6

ALM

18

Stop

RES

14

X5

Left limit

LSP

16

X6

Right limit

LSN

17

X7

Zero return

EMG 15

X10

JOG(+)

SON

5

X11

JOG(-)
Forward
positioning
Reverse
positioning
DOG

SG

10

ABSR

9

TL

X12
X14
X15

Positioning completed

X16

Preparation completed

X17

Z-phase signal (zero point)
Read ABS ready

Y6

Enter ABS mode

Y7
C4

Clear pulse

Y4
C2

9

ABSM 8

CN2

Encoder

Error
counter
Electric
gear

CN1A
INP

18

RD

19

OP

14

LG

1

SG

20

CR

8

SG

20

200KPPS

Pulse output

Y0
C0
Y1

U

S

X4

X13

Servo motor

220VAC
Single phase

3-phase power

L

MR-J2 series
R

Forward/backward direction

C1

PP

3

SG

10

NP

2

SG

10

DVP32EH00T

Note:
(a) When detecting an absolute position by using DABSR instruction, the parameter setting of a Mitsubishi
MR-J2-□A servo drive that connects to Delta EH series PLC:
P0: position mode.
P1: using absolute value.
P21: pulse input type as Pulse+DIR.
(b) The forward/reverse limit switch should be connected to SERVO AMP.
(c) When using OP (Z-phase signal) in servo and given that the Z-phase signal is a high-frequency one when
the motor is running at high speed, the valid detection can only be possible when the signal is within the
range detectable by PLC. When using OP (Z phase signal) of the servo, if Z phase signal is a high
frequency signal during high-speed motor operation, the high frequency signal shall be within the available
range that can be detected by PLC.

9-48

DVP-PLC Application Manual

9 Application Instructions API 150-199
7.

Cautions when designing a position control program:
a) There is no limitation on the times of using the position control instructions, API 156 ZRN, API 157 PLSV,
API 158 DRVI, and API 159 DRVA. However, the user still have to note that:
i. Do not drive the position control instructions which use the same output CH0(Y0, Y1) or CH1(Y2, Y3)
simultaneously. Otherwise, they will be treated as repeated outputs and cannot function normally.
ii. It is recommended that you use the step ladder instruction (STL) to design the position control program
(see the example below).
b) How to use the position control instructions (API 156 ABSR, API 157 PLSV, API 158 DRVI, and API 159
DRVA) and pulse output instructions (API 57 PLSY, API 58 PWM and API 59 PLSR) at the same time.
The position control instruction and pulse output instruction share the 32 bits of the present value register
(D1337 high word; D1336 low word) of CH0 (Y0, Y1) or the present value register of CH1 (Y2, Y3), which will
make the operation complicated. Therefore, it is recommanded that you replace the pulse output instruction
with position control instruction.
c) Explanations on the (Y0, Y1) pulses from CH0 and (Y2, Y3) pulses from CH1.
Voltage range: DC5V ~ DC24V
Current range: 10mA ~ 100mA
Output pulse frequency: Y0, Y2 at 200kHz; Y1, Y3 at 10kHz.

8.

Settings of pulse output signals in the operation of position control for EH/EH2/SV/EH3/SV2 series MPU:
a) Pulse + DIR (recommended)
Pulse
DIR

b) CW/CCW (limited frequency at 10kHz)
CW
CCW

c) A/B-phase output (limited frequency at 10kHz)
A
B

9.

Follow the above output settings of PLC for the pulse input parameters of SERVO AMP or stepping motor.

10. For EH/EH2/SV/EH3/SV2 series MPU, when Y0 output adopts many high-speed pulse output instructions
(PLSY, PWM, PLSR) and position control instructions (ZRN, PLSV, DRVI, DRVA) in a program and these
instructions are executed synchronously in the same scan period, PLC will execute the instruction with the
fewest step numbers.
Programming example for forward/reverse operation:
For the wiring, see the wiring drawing of DVP-EH series and Mitsubishi MR-J2-□A servo drive
One operation mode performs positioning by absolute position:

DVP-PLC Application Manual

9-49

9 Application Instructions API 150-199
500,000
500Hz

Output pulse frequency
200,000Hz
100

Zero point

500Hz
Acceleration/
Deceleration time
200ms

11. Programming example of using step ladder instruction (STL):
X4
M1334

Y0 pulse output pauses

Stop

M1000
M1002

M1346 With clear signal output valid zero return
1

MOV

K200

SET

S0

SET

Y5

D1343

Settings of accel/decel time 200ms--D1343

SERVO On control

※1. If the accel./decel. time (D1343) of CH1 can be default setting, (100ms) this program step can be ignored.

9-50

DVP-PLC Application Manual

9 Application Instructions API 150-199
S0
S

X7
Zero
return

RST

M10

Reset zero point return completed flag

RST

M12

Reset forward positioning completed flag

RST

M13

Reset backward positioning completed flag

SET

S20

Drive zero return (S20)

RST

M12

Reset forward positioning completed flag

RST

M13

Reset backward positioning completed flag

SET

S21

Drive JOG(+) (S21)

RST

M12

Reset forward positioning completed flag

RST

M13

Reset backward positioning completed flag

SET

S22

Drive JOG(-) (S22)

RST

M12

Reset forward positioning completed flag

RST

M13

Reset backward positioning completed flag

SET

S23

Drive forward positioning(S23)

RST

M12

Reset forward positioning completed flag

RST

M13

Reset backward positioning completed flag

SET

S24

Drive forward positioning(S24)

X10
JOG(+)

X11
JOG(-)

X12 M10
Zero
Forward
Positioning return
completed
flag

X13 M10
Backward Zero
positioning return
completed
flag

※2. The max. traveling distance of a JOG operation equals to the max. number of output pulses
(-2,147,483,648 ~ +2,147,483,647) of API 158 DDRVI instruction. Please re-execute JOG of the traveling
distance exceeds the range.

DVP-PLC Application Manual

9-51

9 Application Instructions API 150-199
S20
S

DZRN

Zero
return

M1029

M1336

K5000

X14

Y0

Zero return
speed

Creep
speed

DOG

Pulse output
device

M0
SET

Execution
completed

Zero return instruction
operates in the(-) direction.

K50000

M10

Reset zero point return completed flag

M0
S0

Zero point return is completed

M0

Time-out 1 scan period

Y0 output being executed

M1000
S21
S

X2

JOG(+)

JOG(+)

DDRVI K999999 K30000

M1336

Y0

Y1

Use relative positioning instruction to
execute a JOG operation (when Y1=On)
in the (+) direction.

Number of
Output pulse Pulse output Output point for
output pulses frequency
device
reverse signals
(in + direction)

M1
S0

JOG(+) operation is completed

M1

Time-out 1 scan period

Y0 output being executed

M1000
S22
S
JOG( - )

Use relative positioning instruction to
execute a JOG operation (when Y1=On)
in the ( - ) direction.

X3
DDRVI K - 999999 K30000
JOG( - )

Y0

Y1

Number of
Output pulse Pulse output Output point for
output pulses frequency
device
reverse signals
(in + direction)

M1336 M2
S0

JOG( - ) operation is completed

M2

Time-out 1 scan period

Y0 output being executed

M1000

S23
S

DDRVA K500000 K100000

Forward
positioning

Absolute
position

Output pulse
frequency

Y0

Use absolute positioning instruction to
travel to absolute position 500,000
(Y1=On).

Y1

Pulse output Output point for
device
reverse signals

M1029 M3
SET

M12

Forward positioning completed flag

Execution
completed

M1336 M3
S0

Forward positioning is completed

M3

Time-out 1 scan period

Y0 output being executed

M1000
S24
S

DDRVA

Backward
positioning

K100
Absolute
position

K100000
Output pulse
frequency

Y0

Y1

Use absolute positioning instruction to
travel to absolute position 1 00 (Y1=On).

Pulse output Output point for
device
reverse signals

M1029 M4
SET

M13

Backward positioning completed flag

Execution
completed

M1336 M3
S0

Backward positioning is completed

M3

Time-out 1 scan period

M1000

RET
END

9-52

DVP-PLC Application Manual

9 Application Instructions API 150-199
12. Flags and special registers for SC series MPU:
M1347:

For SC (V1.6 and later versions). Auto reset after Y0 output is completed.

M1348:

For SC (V1.6 and later versions). Auto reset after Y1 output is completed.

M1524:

For SC (V1.6 and later versions). Auto reset after Y10 output is completed.

M1525:

For SC (V1.6 and later versions). Auto reset after Y11 output is completed.

13. Flags and special registers for EH/EH2/SV/EH3/SV2 series MPU:
M1347:
M1348:
M1524:
M1525:

For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH0 pulse
output.
For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH1 pulse
output.
For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH2 pulse
output.
For EH2/SV/EH3/SV2 (V1.4 and later versions). Reset flag for CH3 pulse
output.

DVP-PLC Application Manual

9-53

9 Application Instructions API 150-199
API

Mnemonic

160

TCMP

Type

Function
Time Compare

P
Bit Devices

X

OP

Operands

Word Devices

Y

M

S

*

*

*

S1
S2
S3
S
D

K
*
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*
*

D
*
*
*
*

E
*
*
*

F TCMP, TCMPP: 11 steps
*
*
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: “Hour” for comparison
RTC

S2: “Minute” for comparison

S3: “Second” for comparison

S: Current time of

D: Comparison result

Explanations:
1.

Range of S1: K0 ~ K23; range of S2 and S3: K0 ~ K59

2.

S will occupy 3 consecutive devices; D will occupy 3 consecutive points.

3.

See the specifications of each model for their range of use.

4.

S1, S2 and S3 are compared with the present values of “hour”, “minute” and “second” starting from S. The
comparison result is stored in D.

5.

S is the “hour” of the current time (K0 ~ K23) in RTC; S + 1 is the “minute” (K0 ~ K59) and S + 2 is the “second”
(K0 ~ K59).

6.

S is read by TRD instruction and the comparison is started by TCMP instruction. If S exceeds the range, the
program will regard this as an operation error and the instruction will not be executed, M1067 and M1068 = On
and D1067 will record the error code 0E1A (hex).

Program Example:
1.

When X10= On, the instruction will compare the current time in RTC (D20 ~ D22) with the set value 12:20:45
and display the result in M10 ~ M12. When X10 goes from On to Off, the instruction will not be executed, but
the On/Off stauts prior to M10 ~ M12 will remain.

2.

Connect M10 ~ M12 in series or in parallel to obtain the result of ≧, ≦, and ≠.
X10
TCMP

K12

K20

K45

D20

M10

M10
ON when 12:20:45

>

ON when 12:20:45

=

ON when 12:20:45

<

M11
M12

9-54

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

161

TZCP

Type

Function
Time Zone Compare

P
Bit Devices

X

OP

Operands

S1
S2
S
D

Word Devices

Y

M

S

*

*

*

K

H KnX KnY KnM KnS T
*
*
*

Program Steps
C
*
*
*

D
*
*
*

E

F TZCP, TZCPP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Lower bound of the time for comparison
RTC

S2: Upper bound of the time for comparison

S: Current time of

D: Comparison result

Explanations:
1.

S1, S2, and S will occupy 3 consecutive devices.

2.

The content in S1 must be less than the content in S2.

3.

D will occupy 3 consecutive points.

4.

See the specifications of each model for their range of use.

5.

S is compared with S1 and S2. The comparsion result is stored in D.

6.

S1 , S1 +1, S1 +2: The “hour”, “minute” and “second” of the lower bound of the time for comparison.

7.

S2, S2 +1, S2 +2: The “hour”, “minute” and “second”ond” of the upper bound of the time for comparison.

8.

S , S +1, S +2: The “hour”, “minute” and “second” of the current time of RTC.

9.

D0 designated by S is read by TRD instruction and the comparison is started by TZCP instruction. If S1, S2, and
S exceed their ranges, the program will regard this as an operation error and the instruction will not be
executed, M1067 and M1068 = On and D1067 will record the error code 0E1A (hex).

10. When S < S1 and S < S2, D will be On. When S > S1 and S > S2, D + 2 will be On. In other occasions, D + 1
will be On.
Program Example:
When X10= On, TZCP instruction will be executed and one of M10 ~ M12 will be On. When X10 = Off, TZCP
instruction will not be executed and the status of M10 ~ M12 prior to X10 = Off will remain unchanged.
X10
TZCP

D0

D20

D10

M10

M10
ON when
M11
ON when
M12
ON when

DVP-PLC Application Manual

9-55

9 Application Instructions API 150-199
API

Mnemonic

162

TADD

Type

Operands

Function
Time Addition

P

Bit Devices
X

OP

Y

M

Word Devices
S

S1
S2
D

K

H KnX KnY KnM KnS T
*
*
*

Program Steps
C
*
*
*

D
*
*
*

E

F TADD, TADDP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Time summand

S2: Time addend

D: Time sum

Explanations:
1.

S1, S2, and D will occupy 3 consecutive devices.

2.

See the specifications of each model for their range of use.

3.

Flags: M1020 (zero flag); M1022 (carry flag)

4.

S1 + S2 = D. The hour, minute, and second of the RTC designated in S1 plus the hour, minute, and second
designated in S2. The result is stored in the hour, minute, and second of the register designated in D.

5.

If S1 and S2 exceed their ranges, the program will regard this as an operation error and the instruction will not
be executed. M1067 and M1068 will be On and D1067 record the error code 0E1A (hex).

6.

If the sum is larger than 24 hours, the carry flag M1022 will be On and the value in D will be the result of “sum
minuses 24 hours”.

7.

If the sum equals 0 (00:00:00), the zero flag M1020 will be On.

Program Example:
1.

When X10= On, TADD instruction will be executed and the hour, minute and second in RTC designated in D0
~ D2 will plus the hour, minute and second in RTC designated in D10 ~ D12. The sum is stored in the hour,
minute and second of the register designated in D20 ~ D22.
X10
TADD

2.

D0

D10

D20

8
10
20

6
40
6

14
50
26

08:10:20

06:40:06

14:50:26

If the sum is larger than 24 hours, M1022 will be On.
X10
TADD

9-56

D0

D10

D20

18
40
30

11
30
8

6
10
38

18:40:30

11:30:08

06:10:38

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

163

TSUB

Type

Operands

Function
Time Subtraction

P

Bit Devices
X

OP

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T
*
*
*

S1
S2
D

Program Steps
C
*
*
*

D
*
*
*

E

F TSUB, TSUBP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Time minuend

S2: Time subtrahend

D: Time remainder

Explanations:
1.

S1, S2, and D will occupy 3 consecutive devices.

2.

See the specifications of each model for their range of use.

3.

Flags: M1020 (zero flag); M1021 (borrow flag)

4.

S1 − S2 = D. The hour, minute, and second of the RTC designated in S1 minus the hour, minute, and second
designated in S2. The result is stored in the hour, minute, and second of the register designated in D.

5.

If S1 and S2 exceed their ranges, the program will regard this as an operation error and the instruction will not
be executed. M1067 and M1068 will be On and D1067 record the error code 0E1A (hex).

6.

If the remainder is a negative value, the borrow flag M1021 will be On. The value in D will be the result of “the
negative value pluses 24 hours”.

7.

If the remainder equals 0 (00:00:00), the zero flag M1020 will be On.

Program Example:
1.

When X10= On, TADD instruction will be executed and the hour, minute and second in RTC designated in D0
~ D2 will minus the hour, minute and second in RTC designated in D10 ~ D12. The remainder is stored in the
hour, minute and second of the register designated in D20 ~ D22.
X10
TSUB

2.

D0

D10

D20

20
20
5

14
30
8

5
49
57

20:20:05

14:30:08

05:49:57

If the subtraction result is a negative value, M1021 will be On.
X10
TSUB

D0

D10

D20

5
20
30

19
11
15

10
9
15

05:20:30

19:11:15

10:09:15

DVP-PLC Application Manual

9-57

9 Application Instructions API 150-199
API

Mnemonic

166

TRD

Type

Function
Time Read

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

D

K

H KnX KnY KnM KnS T
*

Program Steps
C
*

D
*

E

F TRD, TRDP: 3 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
D: The device for storing the current time read in RTC
Explanations:
1.

D will occupy 7 consecutive devices.

2.

See the specifications of each model for their range of use.

3.

Flags: M1016, M1017, M1076. See remarks for more details.

4.

The built-in RTC in EH/EH2/SV/EH3/SV2/SA/SX/SC series MPU offers 7 data (year, week, month, day, hour,
minute, second) stored in D1319 ~ D1313. TRD instruction is for program designers to read the current data in
RTC and store the data to the 7 registers designated.

5.

D1319 only reads the 2-digit year in A.D. If you wish D1319 to read the 4-digit year, see remarks for more
information.

Program Example:
1.

When X0 = On, the instruction will read the current time in RTC to the designated registers D0 ~ D6.

2.

The content of D1318: 1 = Monday; 2 = Tuesday … 7 = Sunday.
X0

TRD

Special D

Item

Content

General D

Item

D1319

00~99

D0

1~7

D1

D1317

Year (A.D.)
Day
(Mon ~ Sun)
Month

1~12

D2

Year (A.D.)
Day
(Mon ~ Sun)
Month

D1316

Day

1~31

D3

Date

D1315

Hour

0~23

D4

Hour

D1314

Minute

0~59

D5

Minute

D1313

Second

0~59

D6

Second

D1318

9-58

DVP-PLC Application Manual

9 Application Instructions API 150-199
Remarks:
1.

Flags and special registers for the built-in RTC in SA/SX/SC/EH/EH2/SV/EH3/SV2 series MPU.
Device

Name

Function

Displaying year in
M1016 A.D. in RTC
M1017

±30 seconds
correction

Correction takes place when M1017 goes from Off to On (reset to 0 when in
0 ~ 29 second; minute pluses 1 and second resets to 0 in 30 ~ 59 second)

M1076 Malfunction of RTC

2.

When Off, D1319 will display 2-digit year in A.D.
When On, D1319 will display “2-digit year in A.D + 2,000”.

On when the set value exceeds the range. (only available when the power
is being switched on).

D1313

Second

0 ~ 59

D1314

Minue

0 ~ 59

D1315

Hour

0 ~ 23

D1316

Day

1 ~ 31

D1317

Month

1 ~ 12

D1318

Week

1~7

D1319

Year

0 ~ 99 (2-digit year in A.D.)

How to correct RTC:
There are 2 ways to correct the built-in RTC.

3.

a)

By a specific instruction. (See API 167 TWR instruction)

b)

By peripheral devices, WPLSoft, the ladder diagram editing software.

How to display 4-digit year in A.D.:
a)

Normally, the year is only displayed in 2 digits (e.g. 2003 displayed as 03). If you wish the year to be
displayed in 4 digits, please key in the following program at the start of the program.
M1002
SET

M1016

display 4-digit year in A.D.

b)

The original 2-digit year will be switched to a 4-digit year, i.e. the 2-digit year will pluses 2,000.

c)

If you wish to write in new time in the 4-digit year display mode, you can only write in a 2-digit year (0 ~ 99,
indicating year 2000 ~ 2099). For example, 00=year 2000, 50=year 2050 and 99=year 2099.

DVP-PLC Application Manual

9-59

9 Application Instructions API 150-199
API

Mnemonic

167

TWR

Type

Operands

Function
Time Write

P

Bit Devices
X

OP

Y

M

Word Devices
S

K

S

H KnX KnY KnM KnS T
*

Program Steps
C
*

D
*

E

F TWR, TWRP: 3 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Device for storing the new time to be written into RTC
Explanations:
1.

S will occupy 7 consecutive devices.

2.

See the specifications of each model for their range of use.

3.

Flags: M1016, M1017, M1076. See remarks of API 166 TRD for more details.

4.

To make adjustment on the RTC built in SA/SX/SC/EH/EH2/SV/EH3/SV2 series MPU, use this instruction to
write the correct time into the RTC.

5.

When this instruction is executed, the new set time will be written in the RTC built in PLC immediately.
Therefore, please be noted that the new set time has to match the current time then when the instruction is
executed.

6.

If S exceeds its range, the program will regard it as an operation error and the instruction will not be executed.
M1067 and M1068 will be On and D1067 will record the error code 0E1A (hex).

Program Example 1:
When X0= On, write the correct current time into the RTC.
X0

General D

Item

Content

Special D

Item

D20

Year (A.D.)

00~99

D1319

Year (A.D.)

D21

Day
(Mon ~ Sun)

1~7

D1318

Day
(Mon ~ Sun)

D22

Month

1~12

D1317

Month

D23

Date

1~31

D1316

Date

D24

Hour

0~23

D1315

Hour

D25

Minute

0~59

D1314

Minute

D26

Second

0~59

D1313

Second

Real Time Clock

New set time

TWRP

Program Example 2:
1.

Set the current time in the RTC as 15:27:30, Tuesday, August 19, 2003.

2.

D0 ~ D6 indicate the new set time in the RTC.

3.

X10 = On for changing the current time in the RTC and make the changed value the new set value.

9-60

DVP-PLC Application Manual

9 Application Instructions API 150-199
4.

Whenever X11 = On, RTC will perform a ±30 second correction. The correction is performed according to the
rules: When the second hand of RTC locates at 1 ~ 29, the second will be automatically reset to “0” and the
minute hand will remain at its location. When the second hand locates at 30 ~ 59, the second will be
automatically reset to “0” and the minute hand will increase by 1 minute.
X1 0
MOV

K03

D0

Year (2003)

MOV

K2

D1

Day (Tuesday)

MOV

K8

D2

Month (August)

MOV

K19

D3

Data

MOV

K15

D4

Hour

MOV

K27

D5

Minute

MOV

K30

D6

Second

TWR

D0

X11
M1017

DVP-PLC Application Manual

Write the set time into RTC

+- 30 seconds correction

9-61

9 Application Instructions API 150-199
API

Mnemonic

168

D

MVM

Type

Function
Mask and Combine Designated Bits

P

Bit Devices
X

OP

Operands

Y

M

Word devices
S

K

S1
S2
D

*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*
*
*

E
*
*
*

F MVM, MVMP: 7 steps
* DMVM,DMVMP:
*
* 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Source device 1

S2: Bits to be masked (OFF)

D: Source device 2 / Operation results

[D = (S1 & S2) | (D & ~S2)]
Explanations:
1.

The instruction conducts logical AND operation between S1 and S2 first, logical AND operation between D and
~S2 secondly, and combines the 1st and 2nd results in D by logical OR operation.

2.

Rule of Logical AND operation: 0 AND 1 = 0, 1 AND 0 = 0, 0 AND 0 = 0, 1 AND 1 = 1

3.

Rule of Logical OR operation: 0 OR 1= 1, 1 OR 0 = 1, 0 OR 0 = 0, 1 OR 1 = 1.

Program Example 1 :
When X0 = ON, MVM instruction conducts logical AND operation between 16-bit register D0 and H’FF00 first, logical
AND operation between D4 and H’00FF secondly, and combines the 1st and 2nd results in D4 by logical OR operation.
X0
D0

MVM

b15

D0=HAA55 1
執行前

HFF00

D4

b0
1 0 1 0 1 0 0 1 0 1 0 1 0 1

b15

D4=H1234 0

b0
0 1 0 0 1 0 0 0 1 1 0 1 0 0

AND
HFF00 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0

AND
H00FF 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1

HAA00 1 0 1

H0034 0 0 0

1 0 1 0 0 0 0 0 0 0 0 0

0 0 0 0 0 0 1 1 0 1 0 0

OR
D4=HAA34

執行後

1 0 1

1 0 1 0 0 0 1 1 0 1 0 0

Program Example 2 :
Simplify instructions:
X0

9-62

WAND

HFF00

D110

D110

WAND

H00FF

D120

D120

WOR

D100

D120

D120

=

X0
MVM

D110

HFF00

D120

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

169

D

Function
Hour Meter

HOUR

Type

Bit Devices
X

OP

Operands

S
D1
D2

Word Devices

Y

M

S

*

*

*

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*

Program Steps
C
*

D
*
*

E
*

F HOUR: 7 steps
* DHOUR: 13 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Period of time when D2 is On (in hour)

D1: Current value being measured (in hour)

D2: Output device

Explanations:
1.

If S is used in device F, only 16-bit instruction is applicable.

2.

D1 will occupy 2 consecutive points. D1 + 1 uses 16-bit register in 16-bit or 32-bit instruction.

3.

See the specifications of each model for their range of use.

4.

HOUR instruction can be used 4 times of SA/SX/SC.

5.

Range of S: K1 ~ K32,767 (unit: hour); range of D1: K0 ~ K32,767 (unit: hour). D1 + 1 refers to the current time
that is less than an hour (range: K0 ~K3,599; unit: second).

6.

This instruction times the time and when the time reaches the set time (in hour), D2 will be On. This function
allows the user to time the operation of the machine or conduct maintenance works.

7.

After D2 is On, the timer will resume the timing.

8.

In the 16-bit instruction, when the current time measured reaches the maximum 32,767 hours/3,599 seconds,
the timing will stop. To restart the timing, D1 and D1 + 1 have to be reset to “0”.

9.

In the 32-bit instruction, when the current time measured reaches the maximum 2,147,483,647 hours/3,599
seconds, the timing will stop. To restart the timing, D1 ~ D1 + 2 have to be reset to “0”.

10. There is no limitations on the times of using this instruction in the program for EH series MPU; however, only 4
instructions can be executed at the same time.
Program Example 1:
In 16-bit instruction, when X0 = On, Y10 will be On and the timing will start. When the timing reaches 100 hours, Y0
will be On and D0 will record the current time measured (in hour) and D1 will record the current time that is less than
an hour (0 ~ 3,599; unit: second).
X0
Y10
Y10
HOUR

DVP-PLC Application Manual

K100

D0

Y0

9-63

9 Application Instructions API 150-199
Program Example 2:
In 32-bit instruction, when X0 = On, Y10 will be On and the timing will start. When the timing reaches 40,000 hours,
Y0 will be On. D1 and D0 will record the current time measured (in hour) and D2 will record the current time that is
less than an hour (0 ~ 3,599; unit: second).
X0
Y10
Y10
DHOUR K40000

9-64

D0

Y0

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

170

D

GRY

Type

Function
BIN Æ Gray Code

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
D

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

PULSE
ES EX SS SA SX SC EH SV

Program Steps
C
*
*

D
*
*

E
*
*

F GRY, GRYP: 5 steps
* DGRY, DGRYP: 9 steps
*

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device for BIN value

D: Device for storing Gray code

Explanations:
1.

If S and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

This instruction converts the BIN value in the device designated in S into Gray code and stores the value in D.

4.

See the ranges of S as indicated below. If S exceeds the ranges, the program will regard it as an operation
error and the instruction will not be executed. M1067 and M1068 will be On and D1067 will record the error
code 0E1A (hex).
In 16-bit instruction: 0 ~ 32,767
In 32-bit instruction: 0 ~ 2,147,483,647

Program Example:
When X0 = On, the instruction will convert constant K6,513 into Gray code and store the result in K4Y20.
X0
GRY

K6513

K4Y20

b0

b15

K6513=H1971 0 0 0 1 1 0 0 1 0 1 1 1 0 0 0 1

Y37

Y20

GRAY6513 0 0 0 1 0 1 0 1 1 1 0 0 1 0 0 1
K4Y20

DVP-PLC Application Manual

9-65

9 Application Instructions API 150-199
API

Mnemonic

171

D

GBIN

Type

Function
Gray Code Æ BIN

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
D

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F GBIN, GBINP: 5 steps
* DGBIN, DGBINP: 9 steps
*

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device for Gray code

D: Device for storing BIN value

Explanations:
1.

If S and D are used in device F, only 16-bit instruction is applicable.

2.

See the specifications of each model for their range of use.

3.

This instruction converts the Gray code in the device designated in S into BIN value and stores the value in D.

4.

This instruction converts the content (in Gray code) in the absolute position encoder connected at the PLC
input terminal into BIN value and store the result in the designated register.

5.

See the ranges of S as indicated below. If S exceeds the ranges, the program will regard it as an operation
error and the instruction will not be executed. M1067 and M1068 will be On and D1067 will record the error
code 0E1A (hex).
In 16-bit instruction: 0 ~ 32,767
In 32-bit instruction: 0 ~ 2,147,483,647

Program Example:
When X20 = On, the Gray code in the absolute position encoder connected at X0 ~ X17 will be converted into BIN
value and stored in D10.
X20
GBIN

X17

K4X0

D10

K4X0

X0

GRAY6513 0 0 0 1 0 1 0 1 1 1 0 0 1 0 0 1

b15

b0

H1971=K6513 0 0 0 1 1 0 0 1 0 1 1 1 0 0 0 1

9-66

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

172

D

Operands

ADDR

Type

Function
Floating Point Addition

P

Bit Devices
X

OP

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

S1
S2
D
PULSE
ES EX SS SA SX SC EH SV

D
*
*
*

E

F DADDR, DADDRP: 13 steps

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Floating point summand

S2: Floating point addend

D: Sum

Explanations:
1. S1 and S2 can be floating point values (FX.XX).
2. See the specifications of each model for their range of use.
3. Flags: M1020 (zero flag), M1021 (borrow flag), M1022 (carry flag)
4. In DADDR instruction, floating point values (e.g. F1.2) can be entered directly into S1 and S2 or stored in register
D for operation. When the instruction is being executed, operand D will store the operation result.
5. When S1 and S2 stores the floating point values in register D, their functions are the same as API 120 EADD.
6. S1 and S2 can designate the same register. In this case, if the “continuous execution” type instruction is in use and
during the On period of the drive contact, the register will be added once in every scan by a “pulse execution” type
instruction (DADDRP).
7. If the absolute value of the operation result is larger than the maximum floating point displayable, the carry flag
M1022 will be On.
8. If the absolute value of the operation result is smaller than the minimum floating point displayable, the borrow flag
M1021 will be On.
9. If the operation result is “0”, the zero flag M1020 will be On.
Program Example 1:
When X0 = On, the floating point F1.20000004768372 will plus F2.20000004768372 and the result
F3.40000009536743 will be stored in the data registers (D10, D11).
X0
DADDR

F1.20000004768372 F2.20000004768372

D10

Program Example 2:
When X0 = On, the floating point value (D1, D0) + floating point value (D3, D2) and the result will be stored in the
registers designated in (D11, D10).
X0
DADDR

D0

D2

D10

Remarks:
The functions of this instruction are in V6.6 of ES/EX/SS series, V1.6 of SA/SX series and V1.4 of SC series.
DVP-PLC Application Manual

9-67

9 Application Instructions API 150-199
DADDR instruction supports V1.0 of EH2/SV/EH3/SV2 series, but not EH series.

9-68

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

173

D

Operands

SUBR

Type

Function
Floating Point Subtraction

P

Bit Devices
X

OP

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

S1
S2
D
PULSE
ES EX SS SA SX SC EH SV

D
*
*
*

E

F DSUBR, DSUBRP: 13 steps

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Floating point minuend

S2: Floating point subtrahend

D: Remainder

Explanations:
1. S1 and S2 can be floating point values (FX.XX).
2. See the specifications of each model for their range of use.
3. Flags: M1020 (zero flag), M1021 (borrow flag), M1022 (carry flag)
4. In DSUBR instruction, floating point values (e.g. F1.2) can be entered directly into S1 and S2 or stored in register
D for operation. When the instruction is being executed, operand D will store the operation result.
5. When S1 and S2 stores the floating point values in register D, their functions are the same as API 121 ESUB.
6. S1 and S2 can designate the same register. In this case, if the “continuous execution” type instruction is in use and
during the On period of the drive contact, the register will be subtracted once in every scan by a “pulse execution”
type instruction (DSUBRP).
7. If the absolute value of the operation result is larger than the maximum floating point displayable, the carry flag
M1022 will be On.
8. If the absolute value of the operation result is smaller than the minimum floating point displayable, the borrow flag
M1021 will be On.
9. If the operation result is “0”, the zero flag M1020 will be On.
Program Example 1:
When X0 = On, the floating point F1.20000004768372 will minus F2.20000004768372 and the result F-1 will be
stored in the data registers (D10, D11).
X0
DSUBR F1.20000004768372 F2.20000004768372

D10

Program Example 2:
When X0 = On, the floating point value (D1, D0) – floating point value (D3, D2) and the result will be stored in the
registers designated in (D11, D10).
X0
DSUBR

D0

D2

D10

Remarks:
The functions of this instruction are in V6.6 of ES/EX/SS series, V1.6 of SA/SX series and V1.4 of SC series.
DVP-PLC Application Manual

9-69

9 Application Instructions API 150-199
DADDR instruction supports V1.0 of EH2/SV/EH3/SV2 series, but not EH series.

9-70

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

174

D

Operands

MULR

Type

Function
Floating Point Multiplication

P

Bit Devices
X

OP

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

S1
S2
D
PULSE
ES EX SS SA SX SC EH SV

D
*
*
*

E

F DMULR, DMULRP: 13 steps

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Floating point multiplicand

S2: Floating point multiplicator

D: Product

Explanations:
1. S1 and S2 can be floating point values (FX.XX).
2. See the specifications of each model for their range of use.
3. Flags: M1020 (zero flag), M1021 (borrow flag), M1022 (carry flag)
4. In DMULR instruction, floating point values (e.g. F1.2) can be entered directly into S1 and S2 or stored in register
D for operation. When the instruction is being executed, operand D will store the operation result.
5. When S1 and S2 stores the floating point values in register D, their functions are the same as API 122 EMUL.
6. S1 and S2 can designate the same register. In this case, if the “continuous execution” type instruction is in use and
during the On period of the drive contact, the register will be multiplied once in every scan by a “pulse execution”
type instruction (DMULRP).
10. If the absolute value of the operation result is larger than the maximum floating point displayable, the carry flag
M1022 will be On.
11. If the absolute value of the operation result is smaller than the minimum floating point displayable, the borrow flag
M1021 will be On.
12. If the operation result is “0”, the zero flag M1020 will be On.
Program Example 1:
When X0 = On, the floating point F1.20000004768372 will multiply F2.20000004768372 and the result
F2.64000010490417 will be stored in the data registers (D10, D11).
X0
DMULR F1.20000004768372 F2.20000004768372

D10

Program Example 2:
When X1 = On, the floating point value (D1, D0) × floating point value (D11, D10) and the result will be stored in the
registers designated in (D21, D20).
X1
D0

D10

D20

Remarks:
The functions of this instruction are in V6.6 of ES/EX/SS series, V1.6 of SA/SX series and V1.4 of SC series. DADDR
DVP-PLC Application Manual

9-71

9 Application Instructions API 150-199
instruction supports v1.0 of EH2/SV/EH3/SV2 series, but not EH series.

9-72

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

175

D

Operands

DIVR

Type

Floating Point Division

P

Bit Devices
X

OP

Y

Function

M

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

S1
S2
D
PULSE
ES EX SS SA SX SC EH SV

D
*
*
*

E

F DDIVR, DDIVRP: 13 steps

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Floating point dividend

S2: Floating point divisor

D: Quotient

Explanations:
1. S1 and S2 can be floating point values.
2. See the specifications of each model for their range of use.
3. Flags: M1020 (zero flag), M1021 (borrow flag), M1022 (carry flag)
4. In DDIVR instruction, floating point values (e.g. F1.2) can be entered directly into S1 and S2 or stored in register D
for operation. When the instruction is being executed, operand D will store the operation result.
5. When S1 and S2 stores the floating point values in register D, their functions are the same as API 123 EDIV.
6. If S2 is “0”, the program will regard it as an operation error and the instruction will not be executed. M1067 and
M1068 will be On and D1067 will record the error code H’0E19.
7. If the absolute value of the operation result is larger than the maximum floating point displayable, the carry flag
M1022 will be On.
8. If the absolute value of the operation result is smaller than the minimum floating point displayable, the borrow flag
M1021 will be On.
9. If the operation result is “0”, the zero flag M1020 will be On.
Program Example 1:
When X0 = On, the floating point F1.20000004768372 will be divided by F2.20000004768372 and the result
F0.545454561710358 will be stored in the data registers (D10, D11).
X0
DDIVR

F1.20000004768372 F2.20000004768372

D10

Program Example 2:
When X1 = On, the floating point value (D1, D0) ÷ floating point value (D11, D10) and the quotient will be stored in the
registers designated in (D21, D20).
X1
DDIVR

D0

D10

D20

Remarks:
The functions of this instruction are in V6.6 of ES/EX/SS series, V1.6 of SA/SX series and V1.4 of SC series.
DVP-PLC Application Manual

9-73

9 Application Instructions API 150-199
DADDR instruction supports V1.0 of EH2/SV/EH3/SV2 series, but not EH series.

9-74

DVP-PLC Application Manual

9 Application Instructions API 150-199

API

Mnemonic

176

MMOV

Type

Operands

Function
Magnifying Transfer with Sign Extension

P

Bit Devices
X

OP

Y

M

Word Devices
S

S
D

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*

PULSE
ES EX SS SA SX SC EH SV

Program Steps
C
*
*

D
*
*

E

F MMOV, MMOVP: 5 steps

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Data source (16-bit)

D: Data destination (32-bit)

Explanations:
1. MMOV instruction sends the data in the 16-bit S device to the 32-bit D device. The designated sign bit will be
copied and stored in the destination device.
Program Example 1:
When X23 = On, the data in D4 will be sent to D6 and D7.

X23
MMOV

0
1

"+"號
"-"號

D4

D6

b15

b0

1 0 0 1 1 0 0 1 0 1 1 1 0 0 0 1 D4

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 1 1 0 0 1 0 1 1 1 0 0 0 1 D7, D6
b31

b16 b15

b0

In the example, b15 of D4 is sent to b15 ~ b31 of (D7, D6) as a negative value (same as it is in D4).

DVP-PLC Application Manual

9-75

9 Application Instructions API 150-199
API

Mnemonic

177

GPS
Type

Operands
GPS data receiving

Bit Devices
X

OP

Function

Y

S
D

M

Word devices
S

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F GPS: 5 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Sentence identifier for GPS data receiving

D: Destination device for feedback data

Explanations:
1.

GPS data receiving instruction is only applicable on COM1 (RS-232), with communication format: 9600,8,N,1,
protocol: NMEA-0183, and communication frequency: 1Hz.

2.

Operand S is sentence identifier for GPS data receiving. K0: $GPGGA, K1: $GPRMC.

3.

Operand D stores the received data. Up to 17 consecutive words will be occupied and can not be used
repeatedly. Please refer to the table below for the explanations of each D device.
z

When S is set as K0, sentence identifier $GPGGA is specified. D devices refer to:
No.

Content

Range

Format

D+0

Hour

0 ~ 23

Word

D+1

Minute

0 ~ 59

Word

D+2

Second

0 ~ 59

Word

D + 3~4

Latitude

0 ~ 90

Float

Unit: dd.mmmmmm

North / South

0 or 1

Word

0(+)ÆNorth, 1(-)ÆSouth

Longitude

0 ~ 180

Float

Unit: ddd.mmmmmm

D+8

East / West

0 or 1

Word

0(+)ÆEast, 1(-)ÆWest

D+9

GPS data valid / invalid

0, 1, 2

Word

0 = invalid

D + 10~11

Altitude

0 ~9999.9

Float

Unit: meter

D + 12~13

Latitude

-90 ~ 90

Float

Unit: ±dd.ddddd

D + 14~15

Longitude

-180 ~ 180

Float

Unit: ±ddd.ddddd

D+5
D + 6~7

z

When S is set as K1, sentence identifier $GPRMC is specified. D devices refer to:
No.

Content

Range

Format

D+0

Hour

0 ~ 23

Word

D+1

Minute

0 ~ 59

Word

D+2

Second

0 ~ 59

Word

D + 3~4

Latitude

0 ~ 90

Float

Unit: dd.mmmmmm

North / South

0 or 1

Word

0(+)ÆNorth, 1(-)ÆSouth

Longitude

0 ~ 180

Float

Unit: ddd.mmmmmm

East / West

0 or 1

Word

0(+)ÆEast, 1(-)ÆWest

D+5
D + 6~7
D+8
9-76

Note

Note

DVP-PLC Application Manual

9 Application Instructions API 150-199
No.

Content

Range

Format

Note

GPS data valid / invalid

0, 1, 2

Word

0 = invalid

D + 10

Day

1 ~ 31

Word

D + 11

Month

1 ~ 12

Word

D + 12

Year

2000 ~

Word

D + 13~14

Latitude

-90 ~ 90

Float

Unit: ±dd.ddddd

D + 15~16

Longitude

-180 ~ 180

Float

Unit: ±ddd.ddddd

D+9

4.

When applying GPS instruction, COM1 has to be applied in Master mode, i.e. M1312 has to be enabled to
sending request. In addition, M1314 = ON indicates receiving completed. M1315 = ON indicates receiving error.
(D1250 = K1, receiving time-out; D1250 = K2, checksum error)

5.

Associated M flags and special D registers:
No.

Function

M1312

COM1 (RS-232) sending request

M1313

COM1 (RS-232) ready for data receiving

M1314

COM1 (RS-232) data receiving completed

M1315

COM1 (RS-232) data receiving error

M1138

Retaining communication setting of COM1

D1036

COM1 (RS-232) Communication protocol

D1249

COM1 (RS-232) data receiving time-out setting. (Suggested value: >1s)

D1250

COM1 (RS-232) communication error code

6.

Before applying the received GPS data, please check the value in D+9. If D+9 = 0, the GPS data is invalid.

7.

If data receiving error occurs, the previous data in D registers will not be cleared, i.e. the previous received data
remains intact.

Program example: Sentence identifier: $GPGGA
1.

Set COM1 communication protocol first
M1002

2.

D1036

Set communication protocol
as 9600,8,N,1

MOV

H81

SET

M1138

Retain communication setting

MOV

K2000

D1249

Set receiving time-out as 2s

Then enable M0 to execute GPS instruction with sentence identifier $GPGGA

DVP-PLC Application Manual

9-77

9 Application Instructions API 150-199
M0
SET

M1312

GPS

K0

M0
M1314

D0

Y0

M1315
Y1

3.

When receiving completed, M1314 = ON. When receiving failed, M1315 = ON. The received data will be stored
in devices starting with D0.
No.

Content
Hour

D8

East / West

D1

Minute

D9

GPS data valid / invalid

D2

Second

D10~D11

Altitude

D3~D4

Latitude

D12~D13

Latitude. Unit: ±dd.ddddd

North / South

D14~D15

Longitude. Unit: ±ddd.ddddd

D6~D7

5.

Content

D0

D5

4.

No.

Longitude

Pin number description on GPS module (LS20022)
Pin No. of GPS

1

2

3

4

5

Definition

VCC(+5V)

Rx

Tx

GND

GND

Pin number description on PLC COM1:
Pin No. of COM1
Definition

1

2

3

4

5

6

7

8

VCC(+5V)

--

Rx

Tx

--

--

GND

1

2
5

4

3

8
7

9-78

6

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

178

D

Operands

Function
Solar Panel Positioning

SPA

Type

Bit Devices
X

OP

Y

M

Word devices
S

S
D

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*

E

F DSPA: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Start device for input parameters

D: Start device for output parameters

Explanations:
1.

Operand S occupies 208 consecutive word registers. The function of each device is as below:
No.

Content

Range

Format

Note

S+0

Year

2000 ~

Word

S+1

Month

1 ~ 12

Word

S+2

Day

1 ~ 31

Word

S+3

Hour

0 ~ 23

Word

S+4

Minute

0 ~ 59

Word

S+5

Second

0 ~ 59

Word

S + 6~7

Time difference (Δt) (sec)

± 8000

Float

S + 8~9

Local time zone

± 12

Float

West: negative

± 180

Float

West: negative

S + 10~11 Longitude

Unit: degree
S + 12~13 Latitude

± 90

Float

South: negative
Unit: degree

S + 14~15 Elevation

0~

Float

Unit: meter

0 ~ 5000

Float

Unit: millibar

-273~6000

Float

Unit: °C

S + 20~21 Slope

± 360

Float

S + 22~23 Azimuth

± 360

Float

±5

Float

6500000
S + 16~17 Pressure
S + 18~19 Mean annual temperature (MAT)

S + 24~25 Atmospheric refraction between
sunrise and sunset
S +26~207 Reserved for system operation
2.

Operand D occupies 8 consecutive word registers. The function of each device is as below:
No.

Content

Range

Format

Note

D + 0~1

Zenith

0 ~ 90

Float

Horizontal=0

D + 2~3

Azimuth

0 ~ 360

Float

North point=0

DVP-PLC Application Manual

9-79

9 Application Instructions API 150-199
No.

Content

D + 4~5

Incidence

D+6

Converted DA value of Zenith

Range

Format

0 ~ 90

Float

0 ~ 2000

Word

Note

1LSB = 0.045
degree

D+7

Converted DA value of Azimuth

0 ~ 2000

Word

1LSB = 0.18
degree

3.

The execution time of SPA instruction costs up to 50ms, therefore we suggest users to execute this instruction
with an interval not less than 1 sec, preventing the instruction from taking too much PLC operation time.

4.

Definition of Zenith: 0° and 45°.

0°
5.

45°

Definition of Azimuth:

N
0°

270°

90°

180°

Program example:
1.

Input parameters starting from D4000: 2009/3/23/(y/m/d),10:10:30, Δt = 0, Local time zone = +8,
Longitude/Latitude = +119.192345 East, +24.593456 North, Elevation = 132.2M, Pressure = 820m, MAT =
15.0℃, Slope = 0 degree, Azimuth = -10 degree.

M0 M1013
DSPA

2.

9-80

D4000

D5000

Output results: D5000: Zenith = F37.2394 degree; D5002: Azimuth = F124.7042 degree.

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

179

D

WSUM

Type

Function
Sum of multiple devices

P

Bit Devices
X

OP

Operands

Y

M

Word devices
S

S
n
D

K
*

Program Steps

H KnX KnY KnM KnS T
*
*
*

PULSE

C
*
*

D
*
*
*

E

F WSUM, WSUMP: 7 steps
DWSUM, DWSUMP: 13 steps

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Source device

n: Data length to be summed up

D: Device for storing the result

Explanations:
1.

WSUM instruction sums up n devices starting from S and store the result in D.

2.

The instruction supports V1.7 of EH2/SV/EH3/SV2 series and above, but it does not support EH series.

3.

If the specified source devices S are out of valid range, only the devices in valid range will be processed.

4.

Valid range for n: 1~64. If the specified n value is out of the available range (1~64), PLC will take the upper (64)
or lower (1) bound value as the set value.

Program example:
When X10 = ON, 3 consecutive devices (n = 3) from D0 will be summed up and the result will be stored in D10
X10
WSUM

(D0+D1+D2)
D0

K100

D1

K113

D2

K125

D0

K3

D10

D10

Result: D10

DVP-PLC Application Manual

K338

9-81

9 Application Instructions API 150-199
API

Mnemonic

180

MAND

Type

Function
Matrix ‘AND’ Operation

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
D
n

K

*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*
*
*
*

E

F MAND, MANDP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Matrix source device 1

S2: Matrix source device 2

D: Operation result

n: Array length

Explanations:
1.

Range of n: K1 ~ K256

2.

S1, and S2 designate KnX, KnY, KnM and KnS; D designates KnYm KnM and KnS

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

The two matrix sources S1 and S2 perform matrix ‘AND’ operation according to the array length n. The result is
stored in D.

6.

Operation rule of matix ‘AND’ : The result will be 1 if both two bits are 1; otherwise the result will be 0.

Program Example:
When X0 = On, the 3 arrays of 16-bit registers D0 ~ D2 and the 3 arrays of 16-bit registers D10 ~ D12 will perform a
matrix ‘AND’ operation. The result will be stored in the 3 arrays of 16-bitd registers D20 ~ D22.
X0
MAND

D0

D10

D20

b15

K3

b0

1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1
1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1
1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1

Before
execution

MAND
0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0
0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0
0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0

After
execution

0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0
0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0
0 0 0 1 0 0 1 0 0 0 0 0 0 0 0 0

Remarks:
1.

Explanations on the matrix instruction:
a) A matix consists of more than 1 consecutive 16-bit registers. The number of registers in the matrix is the

9-82

DVP-PLC Application Manual

9 Application Instructions API 150-199
length of the array (n). A matrix contains 16 × n bits (points) and there is only 1 bit (point) offered for an
operand at a time.
b) The matrix instruction gathers a series of 16 × n bits (b0 ~ b16n-1) and designates a single point for operation.
The point will not be seen as a value.
c) The matrix instruction processes the moving, copying, comparing and searching of one-to-many or
many-to-many matrix status, which is a very handy and important application instruction.
d) The matrix operation will need a 16-bit register to designate a point among the 16n points in the matrix for the
operation. The register is the Pointer (Pr) of the matrix, designated by the user in the instruction. The vaild
range of Pr is 0 ~ 16n -1, corresponding to b0 ~ b16n-1 in the matrix.
e) There are left displacement, right displacement and rotation in a matrix operation. The bit number decreases
from left to right (see the figure below).
Left

Right

Width: 16 bits

b15 1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1 b0

D1

b31 1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1 b16

D2

b47 1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1 b32

Length: n

D0

0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0
Dn-1

f)

b16n-1 0 0 0 1 0 0 1 0 0 0 1 1 0 1 0 0

The matrix width (C) is fixed at 16 bits.

g) Pr: matrix pointer. E.g. if Pr is 15, the designated point will be b15.
h) Array length (R) is n: n = 1 ~ 256.
Example: The matrix is composed of D0, n = 3; D0 = HAAAA, D1 = H5555, D2 = HAAFF
R0
R1
R2

C15
1
0
1

C14
0
1
0

C13
1
0
1

C12
0
1
0

C11
1
0
1

C10
0
1
0

C9 C8 C7 C6 C5 C4 C3 C2 C1 C0
1 0 1 0 1 0 1 0 1 0 D0
0 1 0 1 0 1 0 1 0 1 D1
1 0 1 1 1 1 1 1 1 1 D2

Example: The matrix is composed of K2X0, n = 3; K2X0 = H37, K2X10 = H68, K2X20 = H45
R0
R1
R2

C15
0
0
0

C14
0
0
0

C13
0
0
0

C12
0
0
0

C11
0
0
0

C10
0
0
0

C9 C8 C7 C6 C5 C4 C3 C2 C1 C0
0 0 0 0 1 1 0 1 1 1
0 0 0 1 1 0 1 0 0 0
0 0 0 1 0 0 0 1 0 1

X0~X7
X10~X17
X20~X27

Fill “0” into the blank in R0(C15-C8), R1(C15-C8), and R2(C15-C8).

DVP-PLC Application Manual

9-83

9 Application Instructions API 150-199
API

Mnemonic

181

MOR

Type

Function
Matrix ‘OR’ Operation

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
D
n

K

*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*
*
*
*

E

F MOR, MORP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Matrix source device 1

S2: Matrix source device 2.

D: Operation result

n: Array length

Explanations:
1.

Range of n: K1 ~ K256

2.

S1, and S2 designate KnX, KnY, KnM and KnS; D designates KnYm KnM and KnS

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

The two matrix sources S1 and S2 perform matrix ‘OR’ operation according to the array length n. The result is
stored in D.

6.

Operation rule of matrix ‘OR’: The result will be 1 if either of the two bits is 1. The result is 0 only when both two
bits are 0.

Program Example:
When X0 = On, the 3 arrays of 16-bit registers D0 ~ D2 and the 3 arrays of 16-bit registers D10 ~ D12 will perform a
matrix ‘OR’ operation. The result will be stored in the 3 arrays of 16-bit registers D20 ~ D22.
X0
MOR

D0

D10

b15

D20

K3

b0

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

Before
Execution

MOR
0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1
0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1
0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1

After
Execution

0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1
0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1
0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1

9-84

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

182

MXOR

Type

Function
Matrix ‘XOR’ Operation

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
D
n

K

*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*
*
*
*

E

F MXOR, MXORP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Matrix source device 1

S2: Matrix source device 2

D: Operation result

n: Array length

Explanations:
1.

Range of n: K1 ~ K256

2.

S1, and S2 designate KnX, KnY, KnM and KnS; D designates KnYm KnM and KnS

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

The two matrix sources S1 and S2 perform matrix ‘XOR’ operation according to the array length n. The result is
stored in D.

6.

Operation rule of matrix ‘XOR’: The result will be 1 if the two bits are different. The result will be 0 if the two bits
are the same.

Program Example:
When X0 = On, the 3 arrays of 16-bit registers D0 ~ D2 and the 3 arrays of 16-bit registers D10 ~ D12 will perform a
matrix ‘XOR’ operation. The result will be stored in the 3 arrays of 16-bit registers D20 ~ D22.
X0
MXOR

D0

D10

b15

D20

K3

b0

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

Before
Execution

MXOR
MOR
0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1
0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1
0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1

After
Execution

0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1
0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1
0 1 0 1 1 1 1 1 1 1 1 1 0 1 0 1

DVP-PLC Application Manual

9-85

9 Application Instructions API 150-199
API

Mnemonic

183

MXNR

Type

Function
Matrix ‘XNR’ Operation

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
D
n

K

*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*
*

D
*
*
*
*

E

F MXNR, MXNRP: 9 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Matrix source device 1

S2: Matrix source device 2

D: Operation result

n: Array length

Explanations:
1.

Range of n: K1 ~ K256

2.

S1, and S2 designate KnX, KnY, KnM and KnS; D designates KnYm KnM and KnS

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

The two matrix sources S1 and S2 perform matrix ‘XNR’ operation according to the array length n. The result is
stored in D.

6.

Operation rule of matrix ‘XNR’: The result will be 1 if the two bits are the same. The result will be 0 if the two bits
are different.

Program Example:
When X0 = On, the 3 arrays of 16-bit registers D0 ~ D2 and the 3 arrays of 16-bit registers D10 ~ D12 will perform a
matrix ‘XNR’ operation. The result will be stored in the 3 arrays of 16-bit registers D20 ~ D22.
X0
MXNR

D0

D10

b15

D20

K3

b0

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

Before
Execution

MXNR
0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1
0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1
0 0 0 0 1 1 1 1 1 0 1 0 0 1 0 1

After
Execution

1 0 1 0 0 1 0 1 0 0 0 0 1 1 1 1
1 0 1 0 0 1 0 1 0 0 0 0 1 1 1 1
1 0 1 0 0 1 0 1 0 0 0 0 1 1 1 1

9-86

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

184

MINV

Type
X

OP

Operands

Function

P

Matrix Inverse Operation

Bit Devices

Word Devices

Y

M

S

S
D
n

K

*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*
*

E

F MINV, MINVP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Matrix source device

D: Operation result

n: Array length

Explanations:
1.

Range of n: K1 ~ K256

2.

S designates KnX, KnY, KnM and KnS; D designates KnY, KnM and KnS.

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

S performs an inverse matrix operation according to the array length n. The result is stored in D.

Program Example:
When X0 = On, the 3 arrays of 16-bit registers D0 ~ D2 perform a matrix inverse operation. The result will be stored in
the 3 arrays of 16-bit registers D20 ~ D22.
X0
MINV

D0

D20

b15
Before
Execution

K3

b0

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

MINV

After
Execution

1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0

DVP-PLC Application Manual

9-87

9 Application Instructions API 150-199
API

Mnemonic

185

MCMP

Type

Y

Function
Matrix Compare

P

Bit Devices
X

OP

Operands

M

S1
S2
n
D

Word Devices
S

K

*

Program Steps

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*

PULSE

C
*
*
*

D
*
*
*
*

E

F MCMP, MCMPP: 9 steps

*

*

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Matrix source device 1

S2: Matrix source device 2

n: Array length

D: Pointer (Pr), for storing the value of target location
Explanations:
1.

Range of n: K1 ~ K256

2.

S1, and S2 designate KnX, KnY, KnM and KnS; D designates KnY, KnM and KnS.

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

Flags: M1088 ~ M1092. See remarks for more details.

6.

This instruction compares every bit in S1 with every bit in S2 starting from location D + 1 and finds out the
location of different bits. The location will be stored in D.

7.

The matrix comparison flag (M1088) decides to compare between equivalent values (M1088 = 1) or different
values (M1088 = 0). When the comparison is completed, it will stop immediately and the matrix bit search flag
will turn “On” (M1091 = 1). When the comparison progresses to the last bit, the matrix search end flag (M1089)
will turn “On” and the No. where the comparison is completed is stored in D. The comparison will start from the
0th bit in the next scan period when the matrix search start flag turns “On” (M1090 = 1). When D exceeds the
range, the pointer error flag will turn “On” (M1092 = 1).

8.

The matrix operation will need a 16-bit register to designate a point among the 16n points in the matrix for the
operation. The register is the Pointer (Pr) of the matrix, designated by the user in the instruction. The vaild
range of Pr is 0 ~ 16n -1, corresponding to b0 ~ b16n-1 in the matrix. Please avoid changing the Pr value
during the operation in case the comparing and searching will not ne correct. If the Pr value exceeds its range,
M1092 will be On and the instruction will not be executed.

9.

When M1089 and M1091 take place at the same time, both flags will be “1” at the same time.

Program Example:
1.

When X0 goes from Off to On, the matrix search start falg M1090 = 0. The searching will start from the bit
marked with “*” (current Pr value +1) for bits of different status (M1088 = 0).

2.

Set the Pr value D20 = 2. When X0 goes from Off to On for 4 times, we can obtain the 4 execution results n, o,
p, q.
n D20 = 5, M1091 = 1, M1089 = 0.

9-88

DVP-PLC Application Manual

9 Application Instructions API 150-199
o D20 = 45, M1091 = 1, M1089 = 0.
p D20 = 47, M1091 = 0, M1089 = 1.
q D20 = 1, M1091 = 1, M1089 = 0.
X0
MCMPP

D0

D10

K3

D20

2
b0
0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1

D20
pointer

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

b47
MCMP
b0
0 1 0 1 0 1 0 1 0 1 1 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 1 1 0 1 0 1 0 1 0 1 0 1 0 1

b47

Remarks:
Flags explanations:
Flags

Function

M1088

Matrix comparison flag. Comparing between equivalent values (M1088 = 1) or different
values (M1088 = 0).

M1089

Matrix search end flag. When the comparison reaches the last bit, M1089 = 1.

M1090

Matrix search start flag. Comparing from bit 0 (M1090 = 1).

M1091

Matrix bit search flag. When the comparison is completed, the comparison will stop
immediately (M1091=1).

M1092

Matrix pointer error flag. When the pointer Pr exceeds its range, M1092 = 1.

DVP-PLC Application Manual

9-89

9 Application Instructions API 150-199
API

Mnemonic

186

MBRD

Type

Function
Read Matrix Bit

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K

S
n
D

*

Program Steps

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

PULSE

C
*
*

D
*
*
*

E

F MBRD, MBRDP: 7 steps

*

*

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Matrix source device

n: Array length

D: Pointer (Pr), for storing the value of target location

Explanations:
1.

Range of n: K1 ~ K256

2.

S designates KnX, KnY, KnM and KnS; D designates KnY, KnM and KnS.

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

Flags: M1089 ~ M1095. See remarks for more details.

6.

When this instruction is executed, it first determines if the matrix pointer clear flag (M1094) is “On”. If it is “On”,
pointer D is cleared as 0. The instruction then reads the On/Off status from the 0th bit of S to the matrix
rotation/displacement/output carry flag (M1095). Whenever finishing reading 1 bit, the instruction determines
whether the matrix pointer increasing flag (M1093) is “On”. If it is “On”, the value of pointer D will plus 1. When
the reading is processed to the last bit, the matrix search end flag (M1089) will turn “On” and pointer D record
the No. of read bits.

7.

The Pointer (Pr) of the matrix is designated by the user in the instruction. The vaild range of Pr is 0 ~ 16n -1,
corresponding to b0 ~ b16n-1 in the matrix. If the Pr value exceeds its range, M1092 will be On and the instruction
will not be executed.

Program Example:
1.

When X0 goes from Off to On, M1094 will be set to “0” and M1093 to “1”. Therefore, the Pr will plus 1 after
every reading.

2.

Set the Pr value D20 = 45. When X0 goes from Off to On for 3 times, we can obtain the 3 execution results n,
o, p.
n D20 = 46, M1095 = 0, M1089 = 0.
o D20 = 47, M1095 = 1, M1089 = 0.
p D20 = 47, M1095 = 1, M1089 = 1.
X0
MBRDP

9-90

D0

K3

D20

DVP-PLC Application Manual

9 Application Instructions API 150-199
b0

S

0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
b 47

45

Pointer

D20

Remarks:
Flag explanations:
Flags

Function

M1088

Matrix search end flag. When the comparison reaches the last bit, M1089 = 1.

M1092

Matrix pointer error flag. When the pointer Pr exceeds its range, M1092 = 1.

M1093

Matrix pointer increasing flag. Adding 1 to the current value of the Pr.

M1094

Matrix pointer clear flag. Clearing the current value of the Pr to 0.

M1095

Matrix rotation/displacement/output carry flag.

DVP-PLC Application Manual

9-91

9 Application Instructions API 150-199
API

Mnemonic

187

MBWR
Type

Function
Write Matrix Bit

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
n
D

K
*

Program Steps

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

PULSE

C
*
*

D
*
*
*

E

F MBWR, MBWRP: 7 steps

*

*

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Matrix source device

n: Array length

D: Pointer (Pr), for storing the value of target location

Explanations:
1.

Range of n: K1 ~ K256

2.

S designates KnX, KnY, KnM and KnS; D designates KnY, KnM and KnS.

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

Flags: M1089 ~ M1096. See remarks for more details.

6.

When this instruction is executed, if first determines if the matrix pointer clear flag (M1094) is “On”, If it is “On”,
pointer D is cleared as 0. The instruction then writes the value in the matrix displacement/input complement
flag (M1096) into the location starting from the 0th bit of S. Whenever finishing writing 1 bit, the instruction
determines whether the matrix pointer increasing flag (M1093) is “On”. If it is “On”, the value of pointer D will
plus 1. When the writing is processed to the last bit, the matrix search end flag (M1089) will turn “On” and
pointer D records the No. of written bits. If D exceeds its range, M1092 will be On.

7.

The Pointer (Pr) of the matrix is designated by the user in the instruction. The vaild range of Pr is 0 ~ 16n -1,
corresponding to b0 ~ b16n-1 in the matrix. If the Pr value exceeds its range, M1092 will be On and the instruction
will not be executed.

Program Example:
1.

When X0 goes from Off to On, M1094 will be set to “0” and M1093 to “1”. Therefore, the Pr will plus 1 after
every writing.

2.

Set the Pr value D20 = 45 and M1096 = 1. When X0 goes from Off to On for 1 time, we can obtain the execution
results: D20 = 46, M1096 = 1, M1089 = 0.
X0
MBWRP

9-92

D0

K3

D20

DVP-PLC Application Manual

9 Application Instructions API 150-199
b0

Before
Execution

0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
b47

1
45

After
Execution

M1096
(Matrix displacement/input complement flag)
D20 pointer

0 1 0 1 0 1 0 1 0 1 0 1 0 1 1 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 1 1 0 1 0 1 0 1 0 1 0 1 0 1
b47

46

D20 pointer

Remarks:
Flag explanations:
Flags

Function

M1088

Matrix search end flag. When the comparison reaches the last bit, M1089 = 1.

M1092

Matrix pointer error flag. When the pointer Pr exceeds its range, M1092 = 1.

M1093

Matrix pointer increasing flag. Adding 1 to the current value of the Pr.

M1094

Matrix pointer clear flag. Clearing the current value of the Pr to 0.

M1096

Matrix displacement/input complement flag.

DVP-PLC Application Manual

9-93

9 Application Instructions API 150-199
API

Mnemonic

188

MBS

Type
X

OP

Operands

Function

P

Matrix Bit Displacement

Bit Devices

Word Devices

Y

M

S

S
D
n

K

*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*
*

E

F MBS, MBSP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Matrix source device

D: Operation result

n: Array length

Explanations:
1.

Range of n: K1 ~ K256

2.

S designates KnX, KnY, KnM and KnS; D designates KnY, KnM and KnS.

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

Flags: M1095 ~ M1097. See remarks for more details.

6.

This instruction performs left-right displacement on the matrix bits in S according to array length n. M1097
determines the left (M1097 = 0) or right (M1097 = 1) displacement of matrix bits. The empty bits derived from
every displacement of 1 bit (when left displacement: b0; when right displacement: b16n-1) is filled by the status of
the complement flag (M1096). The spare bits (when left displacement: b16n-1; when right displacement: b0) are
sent to the carry flag (M1095). The result is stored in D.

7.

The pulse execution instruction MBSP is generally adopted.

Program Example 1:
When X0 = On, M1097 = Off, indicating a left matrix displacement is performed. Set M1096 = 0 and the 16-bit
registers D0 ~ D2 will perform a left matrix displacement and the result will be stored in the matrix of the 16-bit
registers D20 ~ D22. The carry flag M1095 will be “1”.
X0

9-94

RST

M1097

MBSP

D0

D20

K3

DVP-PLC Application Manual

9 Application Instructions API 150-199
0
b 15

Before
execution

S

M1096
Complement
flag

b0

1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0

M1095
Carry flag

M1097=0

MBS

D

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 0

After the execution of
left matrix displacement

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

1

M1095
Carry flag

Program Example 2:
When X1 = On, M1097 = On, indicating a right matrix displacement is performed. Set M1096 = 1 and the 16-bit
registers D0 ~ D2 will perform a right matrix displacement and the result will be stored in the matrix of the 16-bit
registers D20 ~ D22. The carry flag M1095 will be “0”.
X1
M1097
MBSP

Before
execution

D0

D20

b15
S

K3

b0

1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0

M1095

1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0

Carry flag

1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0

1

M1096

MBS

Complement
flage

M1097=1

D

After the execution of
right matrix displacement

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

0

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

Carry flag

M1095

1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

Explanations:
Flag explanations:
Flags

Function

M1095

Matrix rotation/displacement/output carry flag.

M1096

Matrix displacement/input complement flag.

M1097

Matrix rotation/displacement direction flag.

DVP-PLC Application Manual

9-95

9 Application Instructions API 150-199
API

Mnemonic

189

MBR

Type

Function
Matrix Bit Rotation

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K

S
D
n

*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*
*

E

F MBR, MBRP: 7 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Matrix source device

D: Operation result

n: Array length

Explanations:
1.

Range of n: K1 ~ K256

2.

S designates KnX, KnY, KnM and KnS; D designates KnY, KnM and KnS.

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

Flags: M1095, M1097. See remarks for more details.

6.

This instruction performs left-right rotation on the matrix bits in S according to array length n. M1097
determines the left (M1097 = 0) or right (M1097 = 1) rotation of matrix bits. The empty bits derived from every
rotation of 1 bit (when left rotation: b0; when right rotation: b16n-1) is filled by rotation bits (when left rotation:
b16n-1; when right rotation: b0). The result is stored in D. Rotation bits not only fill the empty bits but also send
the status of bits to the carry flag M1095.

7.

The pulse execution instruction MBRP is generally adopted.

Program Example 1:
When X0 = On, M1097 = Off, indicating a left matrix rotation is performed. The 16-bit registers D0 ~ D2 will perform a
left matrix rotation and the result will be stored in the matrix of the 16-bit registers D20 ~ D22. The carry flag M1095
will be “1”.
X0
RST

M1097

MBRP

D0

D20

b15

Before
Execution

K3

b0

1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0

M1095

MBR
M1097=0
After left rotation
M1095

9-96

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

1

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

DVP-PLC Application Manual

9 Application Instructions API 150-199
Program Example 2:
When X1 = On, M1097 = On, indicating a right matrix rotation is performed. The 16-bit registers D0 ~ D2 will perform
a right matrix rotation and the result will be stored in the matrix of the 16-bit registers D20 ~ D22. The carry flag
M1095 will be “0”.
X1
M1097
MBRP

D0

D20

b15

Before
Execution

K3

b0

1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0

M1095

1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0
1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0

MBR
M1097=0
After right
rotation

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

0

M1095

0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1
0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1

Remarks:
Flag explanations:
Flags

Function

M1095

Matrix rotation/displacement/output carry flag.

M1097

Matrix rotation/displacement direction flag.

DVP-PLC Application Manual

9-97

9 Application Instructions API 150-199
API

Mnemonic

190

MBC

Type

Function
Matrix Bit Status Counting

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S
n
D

K
*

Program Steps

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

PULSE

C
*
*

D
*
*
*

E

F MBC, MBCP: 7 steps

*

*

16-bit

32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Matrix source device

n: Array length

D: Counting result

Explanations:
1.

Range of n: K1 ~ K256

2.

S designates KnX, KnY, KnM and KnS; D designates KnY, KnM and KnS.

3.

SA/SX/SC can designate n = 4. EH/EH2/SV/EH3/SV2 can designate n ≦ 4.

4.

See the specifications of each model for their range of use.

5.

Flags: M1098, M1099. See remarks for more details.

6.

This instruction counts the number of bits which are “1” or “0” in S by array length n. The result is stored in D.

7.

The instruction counts the number of bits which are “1” when M1098 = 1 and counts the number of bits which
are “0” when M1098 = 0. When the operation result is “0”, M1099 = 1.

Program Example:
When X10 = On, in the matrix of D0 ~ D2, when M1098 = 1, the instruction counts the total number of bits which are
“1” and store the number in D10. When M1098 = 0, the instruction counts the total number of bits which are “0” and
store the number in D10.
X10
MBC

D0

K3

D10

1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1
1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1
1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1

12

M1098=0

36

M1098=1

Remarks:
Flag explanations:
Flags

9-98

Function

M1098

Counting the number of bits which are “1” or “0”

M1099

On when the counting result is “0”.

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

191

D

Function
2-Axis Relative Point to Point Motion

PPMR

Type

Bit Devices
X

OP

Operands

S1
S2
S
D

Y

M

Word Devices
S

K
*
*
*

H KnX KnY KnM KnS T
*
*
*

Program Steps
C

D
*
*
*

E

F DPPMR: 17 steps

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Number of output pulses of X axis

S2: Number of output pulses of Y axis

S: Max. point to point output frequency

D: Pulse output device

Explanations:
1.

Flags: M1029, M1030, M1334, M1335. See remarks for more details.

2.

This instruction only supports EH2/SV/EH3/SV2 series MPU, not EH series. In terms of pulse output methods,
this instructin only supports “pulse + direction” mode.

3.

S1 and S2 are the designated (relative designation) number of output pulses in X axis (Y0 or Y4) and Y axis (Y2
or Y6). The range of the number is -2,147,483,648 ~ +2,147,483,647 (+/- represents the forward/backward
direction). When in forward direction, the pulse present value registers CH0 (D1337 high word, D1336 low word),
CH1 (D1339 high word, D1338 low word), CH2 (D1376 high word, D1375 low word) and CH3 (D1378 high word,
D1377 low word) will increase. When in backward direction, the present value will decrease.

4.

D can designate Y0 and Y4.
When Y0 is designated:
Y0 refers to 1st group X-axis pulse output device.
Y1 refers to 1st group X-axis direction signal.
Y2 refers to 1st group Y-axis pulse output device.
Y3 refers to 1st group Y-axis direction signal.
Y4 refers to 2nd group X-axis pulse output device.
Y5 refers to 2nd group X-axis direction signal.
Y6 refers to 2nd group Y-axis pulse output device.
Y7 refers to 2nd group Y-axis direction signal.
When direction signal outputs, Off will not occur immediately after the pulse output is over. Direction signal will
turn Off when the drive contact is Off.

5.

D1340 (D1379) refers to the settings of the start/end frequencies of the 1st/2nd 2-axis motion. D1343 (D1381)
refers to the time of the first acceleration segment and last deceleration segment of the 1st/2nd 2-axis motion.
The time shall be longer than 10ms. If the time is shorter than 10ms or longer than 10,000ms, the output will be
operated at 10ms. Default setting = 100ms.

6.

If the maximum output frequency setting is less than 10Hz, the output will be operated at 10Hz. If the setting is

DVP-PLC Application Manual

9-99

9 Application Instructions API 150-199
more than 200kHz, the output will be operated at 200kHz.
7.

When the 2-axis synchronous motion instruction is enabled, the start frequency and acceleration/deceleration
time in Y axis will be same as the settings in X axis.

8.

The number of output pulses for the 2-axis motion shall not be less than 59; otherwise the line drawn will not be
straight enough.

9.

There is no limitation on the number of times using the instruction. However, assume CH1 or CH2 output is in
use, the 1st group X/Y axis will not be able to output. If CH3 or CH4 output is in use, the 2nd group X/Y axis will
not be able to output.

Program Example:
1. Draw a rhombus as the figure below.
Y
(0, 0)

(-2700 0,-27 000)

X

(270 00,-27 000)

(0, -5 5000)

2. Steps:
a) Set the four coordinates (0,0), (-27000, -27000), (0, -55000), (27000, -27000) (as the figure above). Calculate the
relative coordinates of the four points and obtain (-27000, -27000), (27000, -28000), (27000, 27000), and (-27000,
27000). Place them in the 32-bit (D200, D202), (D204, D206), (D208, D210), (D212, D214).
b) Write program codes as follows.
c) PLC RUN. Set M0 as On and start the 2-axis line drawing.
= D0 K1

DPPMR

D200

D202

K100000

Y0

= D0 K2

DPPMR

D204

D206

K100000

Y0

= D0 K3

DPPMR

D208

D210

K100000

Y0

= D0 K4

DPPMR

D212

D214

K100000

Y0

RST

M1029

MOV

K1

INCP

D0

M0

M0

D0

M1029

END

3. Motion explanation:
When PLC RUN and M0 = On, PLC will start the first point-to-point motion by 100kHz. D0 will plus 1 whenever a
point-to-point motion is completed and the second point-to-point motion will start to execute automatically. The
9-100

DVP-PLC Application Manual

9 Application Instructions API 150-199
same motion will keep executing until the fourth point-to-point motion is completed.
Remarks:
1. Flag explanations:
M1029:

On when the 1st group 2-axis pulse output is completed.

M1036:

On when the 2nd group 2-axis pulse output is completed.

M1334:

On when the 1st group 2-axis pulse output is forbidden.

M1336:

1st group 2-axis pulse output indication flag

M1520:

On when the 2nd group 2-axis pulse output is forbidden.

M1522:

2nd group 2-axis pulse output indication flag

2. Special register explanations:
D1336, D1337

: Pulse present value register for Y0 output of the 1st group X-axis motion. The present value
increases or decreases following the rotation direction. (D1337 high word; D1336 low word)

D1338, D1339

: Pulse present value register for Y2 output of the 1st group Y-axis motion. The present value
increases or decreases following the rotation direction. (D1339 high word; D1338 low word)

D1340

: Frequency settings of the first acceleration and last deceleration segment for the Y0 output
of the 1st group X-axis motion and Y2 of the Y-axis motion for API 191 DPPMR and API 192
DPPMA.

D1343

: Time settings of the first acceleration and last deceleration segment for the Y0 output of the
1st group X-axis motion and Y2 of the Y-axis motion for API 191 DPPMR and API 192
DPPMA.

D1375, D1376

: Pulse present value register for Y4 output of the 2nd group X-axis motion. The present value
increases or decreases following the rotation direction. (D1337 high word; D1336 low word)

D1377, D1378

: Pulse present value register for Y6 output of the 2nd group Y-axis motion. The present value
increases or decreases following the rotation direction. (D1339 high word; D1338 low word)

D1379

: Frequency settings of the first acceleration and last deceleration segment for the Y4 output
of the 2nd group X-axis motion and Y6 of the Y-axis motion for API 191 DPPMR and API 192
DPPMA.

D1381

: Time settings of the first acceleration and last deceleration segment for the Y4 output of the
2nd group X-axis motion and Y6 of the Y-axis motion for API 191 DPPMR and API 192
DPPMA.

DVP-PLC Application Manual

9-101

9 Application Instructions API 150-199
API

Mnemonic

192

D

Function
2-Axis Absolute Point to Point Motion

PPMA

Type

Bit Devices
X

OP

Operands

S1
S2
S
D

Y

M

Word Devices
S

K
*
*
*

H KnX KnY KnM KnS T
*
*
*

Program Steps
C

D
*
*
*

E

F DPPMA: 17 steps

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Number of output pulses of X axis
S: Max. point to point output frequency

S2: Number of output pulses of Y axis
D: Pulse output device

Explanations:
1. Flags: M1029, M1030, M1334, M1335. See remarks of API 191 DPPMR for more details.
2. This instruction only supports EH2/SV/EH3/SV2 series MPU, not EH series. In terms of pulse output methods,
this instructin only supports “pulse + direction” mode.
3. S1 and S2 are the designated (absolute designation) number of output pulses in X axis (Y0 or Y4) and Y axis (Y2
or Y6). The range of the number is -2,147,483,648 ~ +2,147,483,647 (+/- represents the forward/backward
direction). When in forward direction, the pulse present value registers CH0 (D1337 high word, D1336 low word),
CH1 (D1339 high word, D1338 low word), CH2 (D1376 high word, D1375 low word) and CH3 (D1378 high word,
D1377 low word) will increase. When in backward direction, the present value will decrease.
4. D can designate Y0 and Y4.
When Y0 is designated:
Y0 refers to 1st group X-axis pulse output device.
Y1 refers to 1st group X-axis direction signal.
Y2 refers to 1st group Y-axis pulse output device.
Y3 refers to 1st group Y-axis direction signal.
Y4 refers to 2nd group X-axis pulse output device.
Y5 refers to 2nd group X-axis direction signal.
Y6 refers to 2nd group Y-axis pulse output device.
Y7 refers to 2nd group Y-axis direction signal.
When direction signal outputs, Off will not occur immediately after the pulse output is over. Direction signal will
turn Off when the drive contact is Off.
5. D1340 (D1379) refers to the settings of the start/end frequencies of the 1st/2nd 2-axis motion. D1343 (D1381)
refers to the time of the first acceleration segment and last deceleration segment of the 1st/2nd 2-axis motion. The
time shall be longer than 10ms. If the time is shorter than 10ms or longer than 10,000ms, the output will be
operated at 10ms. Default setting = 100ms.
6. If the maximum output frequency setting is less than 10Hz, the output will be operated at 10Hz. If the setting is

9-102

DVP-PLC Application Manual

9 Application Instructions API 150-199
more than 200kHz, the output will be operated at 200kHz.
7. When the 2-axis synchronous motion instruction is enabled, the start frequency and acceleration/deceleration
time in Y axis will be same as the settings in X axis.
8. The number of output pulses for the 2-axis motion shall not be the values within 1 ~ 59; otherwise the line drawn
will not be straight enough.
9. There is no limitation on the number of times using the instruction. However, assume CH1 or CH2 output is in use,
the 1st group X/Y axis will not be able to output. If CH3 or CH4 output is in use, the 2nd group X/Y axis will not be
able to output.
Program Example:
1. Draw a rhombus as the figure below.
Y
(0,0)

X

(27,000, -27,000)

(-27,000, -27,000)

(0, -55,000)

2. Steps:
a) Set the four coordinate (-27,000, -27,000), (0, -55,000), (27,000, -27,000), (0,0) (as the figure above). Place them
in the 32-bit (D200, D202), (D204, D206), (D208, D210), (D212, D214).
b) Write program codes as follows.
c) PLC RUN. Set M0 as On and start the 2-axis line drawing.
= D0 K1

DPPMA

D200

D202

K100000

Y0

= D0 K2

DPPMA

D204

D206

K100000

Y0

= D0 K3

DPPMA

D208

D210

K100000

Y0

= D0 K4

DPPMA

D212

D214

K100000

Y0

RST

M1029

ZRST

D1336

D1339

MOV

K1

D0

INCP

D0

M0

M0

M1029

END

3. Motion explanation:
When PLC RUN and M0 = On, PLC will start the first point-to-point motion by 100kHz. D0 will plus 1 whenever a
point-to-point motion is completed and the second point-to-point motion will start to execute automatically. The

DVP-PLC Application Manual

9-103

9 Application Instructions API 150-199
same motion will keep executing until the fourth point-to-point motion is completed.

9-104

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

193

D

Bit Devices
X

S1
S2
S
D

Function
2-Axis Relative Position Arc Interpolation

CIMR

Type
OP

Operands

Y

M

Word Devices
S

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*

E

F DCIMR: 17 steps

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Number of output pulses of X axis

S2: Number of output pulses of Y axis

S: Parameter setting

D: Pulse output device
Explanations:
1. Flags: M1029, M1030, M1334, M1335. See remarks of API 191 DPPMR for more details.
2. This instruction only supports EH2/SV/EH3/SV2 series MPU, not EH series. In terms of pulse output methods,
this instructin only supports “pulse + direction” mode.
3. S1 and S2 are the designated (relative designation) number of output pulses in X axis (Y0 or Y4) and Y axis (Y2 or
Y6). The range of the number is -2,147,483,648 ~ +2,147,483,647 (+/- represents the forward/backward
direction). When in forward direction, the pulse present value registers CH0 (D1337 high word, D1336 low word),
CH1 (D1339 high word, D1338 low word), CH2 (D1376 high word, D1375 low word) and CH3 (D1378 high word,
D1377 low word) will increase. When in backward direction, the present value will decrease.
4. The lower 16 bits of S (settings of direction and resolution): K0 refers to clockwise 10-segment (average
resolution) output; K2 refers to clockwise 20-segment (higher resolution) output and a 90° arc can be drawn (see
figure 1 and 2). K1 refers to counterclockwise 10-segment (average resolution) output; K3 refers to
counterclockwise 20-segment (higher resolution) output and a 90° arc can be drawn (see figure 3 and 4).
5. The higher 16 bits of S (settings of motion time): K1 refers to 0.1 second. The setting range for average resolution
is K1 ~ K100 (0.1 sec. ~ 10 secs.), for higher resolution is K2 ~ K200 (0.2 sec. ~ 20 secs.) This instruction is
restricted by the maximum pulse output frequency; therefore when the set time goes faster than the actual output
time, the set time will be automatically modified.
Y

Y

( 0,0)

(S 1,S 2 )

20 segments

10 segments

( S 1,S 2 )

X
10 segments

Figur e 1

DVP-PLC Application Manual

(0,0)

X
20 segments

Figur e 2

9-105

9 Application Instructions API 150-199
Y

Y

(S 1,S 2 )

10 segments

20 segments

(S 1,S 2 )

X

(0,0)

X

(0,0)

10 segments

20 segments

Figur e 3

Figur e 4

6. D can designate Y0 and Y4.
When Y0 is designated:
Y0 refers to 1st group X-axis pulse output device.
Y1 refers to 1st group X-axis direction signal.
Y2 refers to 1st group Y-axis pulse output device.
Y3 refers to 1st group Y-axis direction signal.
When Y4 is designated:
Y4 refers to 2nd group X-axis pulse output device.
Y5 refers to 2nd group X-axis direction signal.
Y6 refers to 2nd group Y-axis pulse output device.
Y7 refers to 2nd group Y-axis direction signal.
When direction signal outputs, Off will not occur immediately after the pulse output is over. Direction signal will
turn Off when the drive contact is Off.
7. Draw four 90° arcs.
8. When the direction signal is On, the direction is positive. When the direction signal is Off, the direction is negative.
When S is set as K0, K2, the arcs will be clockwise (see figure 5). When S is set as K1, K3, the arcs will be
counterclockwise (see figure 6).
Y

Qu adrant II

Y

Qu adrant I

Qu adrant I

Qu adrant II
X

X
Qu adrant II I

F igur e 5

Qu adrant IV

Qu adrant IV
Qu adrant II I

F igur e 6

9. When the 2-axis motion is being executed in 10 segments (of average resolution), the operation time of the
instruction when the instruction is first enabled is approximately 5ms. The number of output pulses cannot be less
than 100 and more than 1,000,000; otherwise, the instruction cannot be enabled.
10. When the 2-axis motion is being executed in 20 segments (of high resolution), the operation time of the
instruction when the instruction is first enabled is approximately 10ms. The number of output pulses cannot be
9-106

DVP-PLC Application Manual

9 Application Instructions API 150-199
less than 1,000 and more than 10,000,000; otherwise, the instruction cannot be enabled.
11. If you wish the number of pulses in 10-segment or 20-segment motion to be off the range, you may adjust the
gear ratio of the servo for obtaining your desired number.
12. Every time when the instruction is executed, only one 90° arc can be drawn. It is not necessary that the arc has to
be a precise arc, i.e. the numbers of output pulses in X and Y axes can be different.
13. There are no settings of start frequency and acceleration/deceleration time.
14. There is no limitation on the number of times using the instruction. However, assume CH1 or CH2 output is in use,
the 1st group X/Y axis will not be able to output. If CH3 or CH4 output is in use, the 2nd group X/Y axis will not be
able to output.
15. The settings of direction and resolution in the lower 16 bits of S can only be K0 ~ K3.
16. The settings of motion time in the high 16 bits of S can be slower than the the fastest suggested time but shall not
be faster than the fastest suggested time.
17. The fastest suggested time for the arc interpolation:
Segments

Average
resolution

Higher
resolution

Max. target position (pulse)

Fastest suggested set time (unit:100ms)

100 ~ 10,000

1

10,001 ~ 19,999

2

:

:

Less than 1,000,000

Less than 100

1,000 ~ 20,000

2

20,000 ~ 29,999

3

:

:

Less than 10,000,000

Less than 200

Program Example 1:
1. Draw an ellipse as the figure below.
Y
( 16 00 ,22 00 )

( 0,0 )

X
( 32 00 ,0)

(1 6 00 ,-2 20 0)

2. Steps:
a) Set the four coordinates (0,0), (1600, 2200), (3200, 0), (1600, -2200) (as the figure above). Calculate the relative
coordinates of the four points and obtain (1600, 2200), (1600, -2200), (-1600, -2200), and (-1600, 2200). Place
them in the 32-bit (D200, D202), (D204, D206), (D208, D210), (D212, D214).
b) Select “draw clockwise arc” and “average resolution” (S = K0).
c) Write program codes as follows.
d) PLC RUN. Set M0 as On and start the drawing of the ellipse.

DVP-PLC Application Manual

9-107

9 Application Instructions API 150-199
= D0 K1

DCIMR

D200

D202

K0

Y0

= D0 K2

DCIMR

D204

D206

K0

Y0

= D0 K3

DCIMR

D208

D210

K0

Y0

= D0 K4

DCIMR

D212

D214

K0

Y0

RST

M1029

MOV

K1

INCP

D0

M0

M0

M1029

D0

END

3. Motion explanation:
When PLC RUN and M0 = On, PLC will start the drawing of the first segment of the arc. D0 will plus 1 whenever a
segment of arc is completed and the second segment of the arc will start to execute automatically. The same
motion will keep executing until the fourth segment of arc is completed.
Program Example 2:
1. Draw a tilted ellipse as the figure below.
Y
(2 60 00 ,2 60 00 )
(3 40 00 ,1 80 00 )

X

(0 ,0)
(8 00 0,- 80 00 )

2. Steps:
a) Find the max. and min. coordinates on X and Y axes (0,0), (26000,26000), (34000,18000), (8000,-8000) (as the
figure above). Calculate the relative coordinates of the four points and obtain (26000,26000)、(8000,-8000)、
(-26000,-26000), (-8000,8000). Place them respectively in the 32-bit (D200,D202), (D204,D206), (D208,D210)
and (D212,D214).
b) Select “draw clockwise arc” and “average resolution” (S = K0).
c) Select DCIMR instruction for drawing arc and write program codes as follows.
d) PLC RUN. Set M0 as On and start the drawing of the ellipse.

9-108

DVP-PLC Application Manual

9 Application Instructions API 150-199
= D0 K1

DCIMR

D200

D202

K0

Y0

= D0 K2

DCIMR

D204

D206

K0

Y0

= D0 K3

DCIMR

D208

D210

K0

Y0

= D0 K4

DCIMR

D212

D214

K0

Y0

RST

M1029

MOV

K1

INCP

D0

M0

M0

M1029

D0

END

3. Motion explanation:
When PLC RUN and M0 = On, PLC will start the drawing of the first segment of the arc. D0 will plus 1 whenever a
segment of arc is completed and the second segment of the arc will start to execute automatically. The same
motion will keep executing until the fourth segment of arc is completed.

DVP-PLC Application Manual

9-109

9 Application Instructions API 150-199
API

Mnemonic

194

D

Operands

Function
2-Axis Absolute Position Arc Interpolation

CIMA

Type

Bit Devices
X

OP
S1
S2
S
D

Y

M

Word Devices
S

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*

E

F DCIMA: 17 steps

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Number of output pulses of X axis

S2: Number of output pulses of Y axis

S: Parameter setting

D: Pulse

output device
Explanations:
1. Flags: M1029, M1030, M1334, M1335. See remarks of API 191 DPPMR for more details.
2. This instruction only supports EH2/SV/EH3/SV2 series MPU, not EH series. In terms of pulse output methods,
this instructin only supports “pulse + direction” mode.
3. S1 and S2 are the designated (absolute designation) number of output pulses in X axis (Y0 or Y4) and Y axis (Y2
or Y6). The range of the number is -2,147,483,648 ~ +2,147,483,647. When S1 and S2 are larger than pulse
present value registers CH0 (D1337 high word, D1336 low word), CH1 (D1339 high word, D1338 low word), CH2
(D1376 high word, D1375 low word), and CH3 (D1378 high word, D1377 low word), the output direction will be
positive and direction signals Y1, Y3, Y5, Y7 will be On. When S1 and S2 are less than pulse present value
registers, the output direction will be negative and direction signals Y1, Y3, Y5, Y7 will be Off.
4. The lower 16 bits of S (settings of direction and resolution): K0 refers to clockwise 10-segment (average
resolution) output; K2 refers to clockwise 20-segment (higher resolution) output and a 90° arc can be drawn (see
figure 1 and 2). K1 refers to counterclockwise 10-segment (average resolution) output; K3 refers to
counterclockwise 20-segment (higher resolution) output and a 90° arc can be drawn (see figure 3 and 4).
5. The higher 16 bits of S (settings of motion time): K0 refers to 0.1 second. The setting range for average resolution
is K1 ~ K100 (0.1 sec. ~ 10 secs.), for higher resolution is K2 ~ K200 (0.2 sec. ~ 20 secs.) This instruction is
restricted by the maximum pulse output frequency; therefore when the set time goes faster than the actual output
time, the set time will be automatically modified.
Y

Y

(0, 0)

X
10 se gment s

F igur e 1

9-110

(S 1, S2)

20 se gment s

10 se gment s

(S1, S 2)

(0, 0)

X
20 se gment s

F igur e 2

DVP-PLC Application Manual

9 Application Instructions API 150-199
Y

Y

(S 1, S 2)

10 se gment s

20 se gment s

(S 1, S 2)

(0, 0)

X

X

(0, 0)

10 se gment s

20 se gment s

F igur e 3

F igur e 4

6. D can designate Y0 and Y4.
When Y0 is designated:
Y0 refers to 1st group X-axis pulse output device.
Y1 refers to 1st group X-axis direction signal.
Y2 refers to 1st group Y-axis pulse output device.
Y3 refers to 1st group Y-axis direction signal.
When Y4 is designated:
Y4 refers to 2nd group X-axis pulse output device.
Y5 refers to 2nd group X-axis direction signal.
Y6 refers to 2nd group Y-axis pulse output device.
Y7 refers to 2nd group Y-axis direction signal.
When direction signal outputs, Off will not occur immediately after the pulse output is over. Direction signal will
turn Off when the drive contact is Off.
7. Draw four 90° arcs.
8. When the direction signal is On, the direction is positive. When the direction signal is Off, the direction is negative.
When S is set as K0, K2, the arcs will be clockwise (see figure 5). When S is set as K1, K3, the arcs will be
counterclockwise (see figure 6).
Y

Qu adrant II

Y

Qu adrant I

Qu adrant I

Qu adrant II
X

X
Qu adrant II I

Qu adrant IV

F igur e 5

Qu adrant IV
Qu adrant II I

F igur e 6

9. When the 2-axis motion is being executed in 10 segments (of average resolution), the operation time of the
instruction when the instruction is first enabled is approximately 5ms. The number of output pulses cannot be less
than 100 and more than 1,000,000; otherwise, the instruction cannot be enabled.
10. When the 2-axis motion is being executed in 20 segments (of high resolution), the operation time of the
instruction when the instruction is first enabled is approximately 10ms. The number of output pulses cannot be
less than 1,000 and more than 10,000,000; otherwise, the instruction cannot be enabled.
DVP-PLC Application Manual

9-111

9 Application Instructions API 150-199
11. If you wish the number of pulses in 10-segment or 20-segment motion to be off the range, you may adjust the
gear ratio of the servo for obtaining your desired number.
12. Every time when the instruction is executed, only one 90° arc can be drawn. It is not necessary that the arc has to
be a precise arc, i.e. the numbers of output pulses in X and Y axes can be different.
13. There are no settings of start frequency and acceleration/deceleration time.
14. There is no limitation on the number of times using the instruction. However, assume CH1 or CH2 output is in use,
the 1st group X/Y axis will not be able to output. If CH3 or CH4 output is in use, the 2nd group X/Y axis will not be
able to output.
15. The settings of direction and resolution in the lower 16 bits of S can only be K0 ~ K3.
16. The settings of motion time in the high 16 bits of S can be slower than the the fastest suggested time but shall not
be faster than the fastest suggested time.
17. The fastest suggested time for the arc interpolation:
Segments

Max. target position (pulse)

Fastest suggested set time (unit:100ms)

100 ~ 10,000

1

10,001 ~ 19,999

2

:

:

Less than 1,000,000

Less than 100

1,000 ~ 20,000

2

20,000 ~ 29,999

3

:

:

Less than 10,000,000

Less than 200

Average
resolution

Higher
resolution

Program Example 1:
1. Draw an ellipse as the figure below.
Y
( 16 00 0,2 20 00 )

( 0,0 )

X
( 32 00 0,0 )

(1 6 00 0,- 22 00 0)

2. Steps:
a) Set the four coordinates (0,0), (16000, 22000), (32000, 0), (16000, -22000) (as the figure above). Place them in
the 32-bit (D200, D202), (D204, D206), (D208, D210), (D212, D214).
b) Select “draw clockwise arc” and “average resolution” (S = K0).
c) Select DCIMA instruction for drawing arc and write program codes as follows.
d) PLC RUN. Set M0 as On and start the drawing of the ellipse.

9-112

DVP-PLC Application Manual

9 Application Instructions API 150-199
= D0 K1

DCIMA

D200

D202

K0

Y0

= D0 K2

DCIMA

D204

D206

K0

Y0

= D0 K3

DCIMA

D208

D210

K0

Y0

= D0 K4

DCIMA

D212

D214

K0

Y0

RST

M1029

ZRST

D1336

D1339

MOV

K1

D0

INCP

D0

M0

M0

M1029

END

3. Motion explanation: :
When PLC RUN and M0 = On, PLC will start the drawing of the first segment of the arc. D0 will plus 1 whenever a
segment of arc is completed and the second segment of the arc will start to execute automatically. The same
motion will keep executing until the fourth segment of arc is completed.
Program Example 2:
1. Draw a tilted ellipse as the figure below.
Y
(2 60 00 ,2 60 00 )
(3 40 00 ,1 80 00 )

X

(0 ,0)
(8 00 0,- 80 00 )

2. Steps:
a) Find the max. and min. coordinates on X and Y axes (0,0), (26000,26000), (34000,18000), (8000,-8000) (as the
figure above). Place them respectively in the 32-bit (D200,D202), (D204,D206), (D208,D210) and (D212,D214).
b) Select “draw clockwise arc” and “average resolution” (S = K0).
c) Select DCIMA instruction for drawing arc and write program codes as follows.
d) PLC RUN. Set M0 as On and start the drawing of the ellipse.

DVP-PLC Application Manual

9-113

9 Application Instructions API 150-199
= D0 K1

DCIMA

D200

D202

K0

Y0

= D0 K2

DCIMA

D204

D206

K0

Y0

= D0 K3

DCIMA

D208

D210

K0

Y0

= D0 K4

DCIMA

D212

D214

K0

Y0

RST

M1029

ZRST

D1336

D1339

MOV

K1

D0

INCP

D0

M0

M0

M1029

END

3. Motion explanation:
When PLC RUN and M0 = On, PLC will start the drawing of the first segment of the arc. D0 will plus 1 whenever a
segment of arc is completed and the second segment of the arc will start to execute automatically. The same
motion will keep executing until the fourth segment of arc is completed.

9-114

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

195

D

Operands

Function
Single-Axis Pulse Output by Table

PTPO

Type

Bit Devices
X

OP

Y

S1
S2
D

M

Word Devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

D
*
*

E

F DPTPO: 13 steps

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Source start device

S2: Number of segments

D: Pulse output device

Explanations:
1. Flags: M1029, M1030, M1334, M1335. See remarks for more details.
2. This instruction only supports EH2/SV/EH3/SV2 series MPU, not EH series.
3. According to the value of S2 + 0, every segment consecutively occupy four register D. (S1 + 0) refers to output
frequency. (S1 + 2) refers to the number of output pulses.
4. When the output frequency of S1 is less than 1, PLC will automatically modify it as 1. When the value is larger
than 200,000kHz, PLC will automatically modify it as 200,000kHz.
5. S2 + 0: number of segments (range: 1 ~ 60). S2 + 1: number of segments being executed. Whenever the program
scans to this instruction, the instruction will automatically update the segment No. that is currently being
executed.
6. D can only designate output devices Y0, Y2, Y4 and Y6 and can only perform pulse output control. For the pin for
direction control, the user has to compile other programs to control.
7. This instruction does not offer acceleration and deceleration functions. Therefore, when the instruction is disabled,
the output pulses will stop immediately.
8. In every program scan, each channel can only be executed by one instruction. However, there is no limitation on
the number of times using this instruction.
9. When the instruction is being executed, the user is not allowed to update the frequency or number of the
segments. Changes made will not be able to make changes in the actual output.
Program Example:
1. When X0 = On, the output will be operated according to the set frequency and number of pulses in every
segment.
2. Format of the table:
S2 = D300, number of segments
(D300 = K60)

S1 = D0, frequency (S1 + 0)

S1 = D0, number of output pulses
(S1 + 2)

K1 (1st segment)

D1, D0

D3, D2

K2 (2nd segment)

D5, D4

D7, D6

:
:

:
:

:
:

K60 (60th segment)

D237, D236

D239, D238

DVP-PLC Application Manual

9-115

9 Application Instructions API 150-199
3. Monitor the segment No. that is currently being executed in register D301.
X0
DPTPO

D0

D300

Y0

END

4. The pulse output curve:
Frequency (Hz)

(D237,D236)

....
....

(D5,D4)

(D239,D238)

(D7,D6)

(D1,D0)
(D3,D2)

Time (S)
t2

t1

t ....

t 60

Remarks:
1. Flag explanations:
M1029:

On when CH0 (Y0) pulse output is completed.

M1030:

On when CH1 (Y2) pulse output is completed.

M1036:

On when CH2 (Y4) pulse output is completed.

M1037:

On when CH3 (Y6) pulse output is completed.

M1334:

When On, CH0 (Y0) pulse output will be forbidden.

M1335:

When On, CH1 (Y2) pulse output will be forbidden.

M1520:

When On, CH2 (Y4) pulse output will be forbidden.

M1521:

When On, CH3 (Y6) pulse output will be forbidden.

M1336:

CH0 (Y0) pulse output indication flag

M1337:

CH1 (Y2) pulse output indication flag

M1522:

CH2 (Y4) pulse output indication flag

M1523:

CH3 (Y6) pulse output indication flag

2. Special register explanations:

9-116

D1336, D1337:

Pulse present value register of CH0 (Y0) (D1337 high word, D1336 low word)

D1338, D1339:

Pulse present value register of CH1 (Y2) (D1339 high word, D1338 low word)

D1375, D1376:

Pulse present value register of CH2 (Y4) (D1376 high word, D1375 low word)

D1377, D1378:

Pulse present value register of CH3 (Y6) (D1378 high word, D1377 low word)

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

196

HST

Type

Function
High Speed Timer

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

K
*

S

H KnX KnY KnM KnS T
*

Program Steps
C

D

E

F HST, HSTP: 3 steps

PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S: Condition to stop the startup of high speed timer
Explanations:
1.

Range of S: S = K0 (H0), K1 (H1).

2.

Flag: M1015

3.

When S = 1, the high speed timer will be enabled and M1015 = On. The high speed timer starts to time and
record the present value in D1015 (min. unit: 100us).

4.

Timing range of D1015: K0 ~ K32,767. When the timing reaches K32,767, the next timing will restart from 0.

5.

When S = 0, the high speed timer will be disabled and M1015 = Off. D1015 will stop the timing immediately.

6.

When S is neither 1 nor 0, HST instruction will not be executed.

Program Example :
1.

When X10 = On, M1015 will be On. The high speed timer will start to time and record the present value in
D1015.

2.

When X10 = Off, M1015 will be Off. The high speed timer will be shut down.
X10
HST

K1

HST

K0

X10

Remarks:
1.

Flag explanations:
M1015: high speed timer start-up flag
D1015: high speed timer

2.

EH/EH2/SV/EH3/SV2 series MPU do not use this instruction and use special M and special D directly for the
timer.
a) Special M and special D are only applicable when PLC RUN.
b) When M1015 = On and PLC scans to END instruction, the high speed timer D1015 will be enabled. The
minimum timing unit of D1015: 100us.
c) Timing range of D1015: K0 ~ K32,767. When the timing reaches K32,767, the next timing will restart from
K0.
d) When M1015 = Off, D1015 will stop the timing when encountering END or HST instruction.

3.

SA/SX/SC series MPU do not use this instruction and use special M and special D directly for the timer.

DVP-PLC Application Manual

9-117

9 Application Instructions API 150-199
a) Special M and special D are applicable when PLC RUN or STOP.
b) When M1015 = On, the high speed timer D1015 will be enabled. The minimum timing unit of D1015:
100us.
c) Timing range of D1015: K0 ~ K32,767. When the timing reaches K32,767, the next timing will restart from
K0.
d) When M1015 = Off, D1015 will stop the timing immediately.

9-118

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

197

D

Close Loop Position Control

Bit Devices
X
*

S1
S2
S3
D

Function

CLLM

Type
OP

Operands

Y

M

Word Devices
S

K

H KnX KnY KnM KnS T

*
*

*
*

Program Steps
C
*

D

E

F DCLLM: 17 steps

*
*

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Feedback source device

S2: Target number of feedbacks

S3: Target frequency of output

D: Pulse output device
Explanations:
1. Flags: M1029, M1030, M1334, M1335. See remarks for more details.
2. This instruction only supports EH2/SV/EH3/SV2 series MPU, not EH series.
3. The corresponding interruption of S1:
Source device

X0

X1

X2

X3

Corresponding outout

Y0

Y2

Y4

Y6

Interruption No.
= 1: rising-edige trigger;

I00

I10

I20

I30

C241 ~ C254
Y0

Y2

Y4

Y6

I010

I020

I030

I040

= 0: falling-edge trigger

a) When S1 designates X as the input points and the pulse output reaches the set target number of feedbacks
in S2, the output will continue to operate by the frequency of the last segment until the interruption of X input
points occurs.
b) When S1 designates a high speed counter and the pulse output reaches the set target number of feedbacks
in S2, the output will continue to operate by the frequency of the last segment until the feedback pulses
reaches the target number.
c) S1 can be a high speed counter C or an external interruption X. If S1 is C, DCNT instruction should be first
executed to enable the high-speed counting function and EI and I0x0 interruption service program to enable
the high-speed interruption. If S1 is X, EI instruction and I0x0 interruption service program should be
executed to enable the external interruption function.
4. The range of S2: -2,147,483,648 ~ +2,147,483,647 (+/- represents the forward/backward direction). When in
forward direction, the pulse present value registers CH0 (D1337 high word, D1336 low word), CH1 (D1339 high
word, D1338 low word), CH2 (D1376 high word, D1375 low word) and CH3 (D1378 high word, D1377 low word)
will increase. When in backward direction, the present value will decrease.
5. If S3 is lower than 10Hz, the output will operate at 10Hz; if S3 is higher than 200kHz, the output will operate at
200kHz.
6. D can only designate Y0, Y2, Y4 and Y6 and the direction signals repectively are Y1, Y3, Y5 and Y7. When
there is a direction signal output, the direction signal will not be Off immediately after the pulse output is
DVP-PLC Application Manual

9-119

9 Application Instructions API 150-199
completed. The direction signal will be Off only when the drive contact is Off.
7. D1340, D1352, D1379 and D1380 are the settings of start/end frequencies of CH0 ~ CH3. The minimun
frequency is 10Hz and default is 200Hz.
8. D1343, D1353, D1381 and D1382 are the settings of the time of the first segment and the last deceleration
segment of CH0 ~ CH3. The acceleration/deceleration time cannot be shorter than 10ms. The outptu will be
operated in 10ms if the time set is shorter than 10ms or longer than 10,000ms. The dafault setting is 100ms.
9. D1131, D1132, D1478 and D1479 are the output/input ratio of the close loop control in CH0 ~ CH3. K1 refers to
1 output pulse out of the 100 target feedback input pulses; K200 refers to 200 output pulses out of the 100
target feedback input pulses. D1131, D1132, D1478 and D1479 are the numerators of the ratio (range: K1 ~
K10,000) and the denominator is fixed as K100 (the user does not have to enter a denominator).
10. M1305, M1306, M1532 and M1533 are the direction signal flags for CH0 ~ CH3. When S2 is a positive value,
the output will be in forward direction and the flag will be Off. When S2 is a negative value, the output will be in
backward direction and the flag will be On.
Close Loop Explanations:
1. Function: Immediately stop the high-speed pulse output according to the number of feedback pulses or external
interruption signals.
2. The execution:
Frequency

C high speed counting = target number of feedbacks
or
occurrence of external interruption

Target frequency

Start/end frequency

Time
Number
Acceleration
time

High speed time

Deceleration time
Idling time

Number of output pulses =
target number of feedbacks x percentage value/100

3. How to adjust the time for the completion of the positioning:
a) The time for the completion of the positioning refers to the time for “acceleration + high speed +
deceleration + idling” (see the figure above). For example, you can increase or decrease the entire number
of output pulses by making adjustment on the percentage value and further increase or decrease the time
required for the positioning.
b) Among the four segments of time, only the idling time cannot be adjusted directly by the user. However, you
can determine if the execution result is good or bad by the length of the idling time. In theory, a bit of idling
left is the best result for a positioning.
c) Owing to the close loop operation, the length of idling time will not be the same in every execution.
Therefore, when the content in the special D for displaying the actial number of output pulses is smaller or
larger than the calculated number of output pulses (taget number of feedbacks x percentage value/100),
9-120

DVP-PLC Application Manual

9 Application Instructions API 150-199
you can improve the situation by adjusting the percentage value, acceleration/decelartion time or target
frequency.
Program Example:
1. Assume we adopt X0 as the external interruption, together with I001 (rising-edge trigger) interruption program;
target number of feedbacks = 50,000; target frequency = 10kHz; Y0, Y1 (CH0) as output pulses; start/end
frequency (D1340) = 200Hz; acceleration time (D1343) = 300ms; deceleration time (D1348) = 600ms;
percentage value (D1131) = 100; current number of output pulses (D1336, D1337) = 0.
2. Write the program codes as follows:
M1002
MOV

K100

D1131

MOV

K300

D1343

MOV

K600

D1348

SET

M1534

DMOV

K0

D1336

EI
M0
DCLLM

X0

K50000 K100000

Y0

FEND
M1000
INC

I010

D0

IRET
END

3. Assume the first execution result as:
Frequency

X0 Off --> On
Y0 stops output

100KHz

D1340
D1340

Time
Number
D1343

D1348

Estimated number of output pulses: 50,000
Actual number of output pulses (D1336, D1337) = K49,200

4. Observe the result of the first execution:
a) The actual output number 49,200 – estimated output number 50,000 = -800 (a negative value). A negative
value indicates that the entire execution finishes earlier and has not completed yet.
DVP-PLC Application Manual

9-121

9 Application Instructions API 150-199
b) Try to shorten the acceleration time (D1343) into 250ms and deceleration time (D1348) into 550ms.
5. Obtain the result of the second execution:
Frequency
X0 Off --> On
Y0 stops output

100KHz

D1340
D1340

Time
Number
D1343

D1348

Estimated number of output pulses: 50,000
Actual number of output pulses (D1336, D1337) = K50,020

6. Observe the result of the second execution:
a) The actual output number 50,020 – estimated output number 50,000 = 20
b) 20 x (1/200Hz) = 100ms (idling time)
c) 100ms is an appropriate value. Therefore, set the acceleration time as 250ms and deceleration time as
550ms to complete the design.
Program Example 2:
1. Assume the feedback of the encoder is an A/B phase input and we adopt C251 timing (we suggust you clear it
to 0 before the execution); target number of feedbacks = 50,000; target output frequency = 100kHz; Y0, Y1
(CH0) as output pulses; start/end frequency (D1340) = 200Hz; acceleration time (D1343) = 300ms; deceleration
time (D1348) = 600ms; precentage value (D1131) = 100; current number of output pulses (D1336, D1337) = 0.
2. Write the program codes as follows:

9-122

DVP-PLC Application Manual

9 Application Instructions API 150-199
M1002
MOV

K100

D1131

MOV

K300

D1343

MOV

K600

D1348

SET

M1534

DMOV

K0

RST

C251

D1336

EI
M0
DCNT

C251

K100000

DCLLM

C251

K50000

K100000

Y0

FEND
M1000
INC

I010

D0

IRET
END

3. Assume the first execution result as:
Frequency

C251 =K50000
Y0 stops output

100KHz

D1340

Time
Number
D1343

D1348

3s

Estimated number of output pulses: 50,000
Actual number of output pulses (D1336, D1337) = K50,600

4. Observe the result of the first execution:
a) The actual output number 50,600 – estimated output number 50,000 = 600
b) 600 x (1/200Hz) = 3s (idling time)
c) 3 seconds are too long. Therefore, increase the percentage value (D1131) to K101.
5. Obatin the result of the second execution:

DVP-PLC Application Manual

9-123

9 Application Instructions API 150-199
Frequency

C251 =K50000
Y0 stops output

100KHz

D1340

Time
Number
D1343

D1348

300ms

Estimated number of output pulses: 50,500
Actual number of output pulses (D1336, D1337) = K50,560

6. Observe the result of the second execution:
a) The actual output number 50,560 – estimated output number 50,500 = 60
b) 60 x (1/200Hz) = 300ms (idling time)
c) 300ms is an appropriate value. Therefore, set the percentage value (D1131) as K101 to complete the
design.
Remarks:
1. Flag explanations:
M1010:

When On, CH0, CH1, CH2 and CH3 will output pulses when encountering END instruction. Off
when the output starts.

M1029:

On when CH0 pulse output is completed.

M1030:

On when CH1 pulse output is completed.

M1036:

On when CH2 pulse output is completed.

M1037:

On when CH3 pulse output is completed.

M1257

The acceleration/deceleration of the high-speed pulse output Y0 and Y2 are S curves.

M1334:

When On, CH0 pulse output will be forbidden.

M1335:

When On, CH1 pulse output will be forbidden.

M1520:

When On, CH2 pulse output will be forbidden.

M1521:

When On, CH3 pulse output will be forbidden.

M1336:

CH0 pulse output indication flag

M1337:

CH1 pulse output indication flag

M1522:

CH2 pulse output indication flag

M1523:

CH3 pulse output indication flag

M1305:

CH0 direction signal flag

M1306:

CH1 direction signal flag

M1532:

CH2 direction signal flag

M1533:

CH3 direction signal flag

M1534:

Deceleration time of CH0 setup flag (must used with D1348)

M1535:

Deceleration time of CH1 setup flag (must used with D1349)

M1536:

Deceleration time of CH2 setup flag (must used with D1350)

M1537:

Deceleration time of CH3 setup flag (must used with D1351)

9-124

DVP-PLC Application Manual

9 Application Instructions API 150-199
2. Special register explanations:
D1127

The number of pulses in the acceleration section in the position instruction (low word)

D1128

The number of pulses in the acceleration section in the position instruction (high word)

D1131:

Close loop output/input ratio of CH0 (default: K100)

D1132:

Close loop output/input ratio of CH1 (default: K100)

D1133

The number of pulses in the deceleration section in the position instruction (low word)

D1134

The number of pulses in the deceleration section in the position instruction (high word)

D1220:

Phase setting of CH0 (Y0, Y1): determined by the last 2 digits of D1220; other digits are invalid.
1. K0: Y0 output
2. K1: Y0, Y1 AB-phase output; A ahead of B
3. K2: Y0, Y1 AB-phase output; B ahead of A

D1221:

Phase setting of CH1 (Y2, Y3): determined by the last 2 digits of D1221; other digits are invalid.
1. K0: Y2 output
2. K1: Y2, Y3 AB-phase output; A ahead of B
3. K2: Y2, Y3 AB-phase output; B ahead of A

D1229:

Phase setting of CH2 (Y4, Y5): determined by the last 2 digits of D1229; other digits are invalid.
1. K0: Y4 output
2. K1: Y4, Y5 AB-phase output; A ahead of B
3. K2: Y4, Y5 AB-phase output; B ahead of A

D1230:

Phase setting of CH3 (Y6, Y7): determined by the last 2 digits of D1230; other digits are invalid.
1. K0: Y6 output
2. K1: Y6, Y7 AB-phase output; A ahead of B
3. K2: Y6, Y7 AB-phase output; B ahead of A

D1222:

Time difference between the direction signal and pulse output of CH0

D1223:

Time difference between the direction signal and pulse output of CH1

D1240

Low 16 bytes of the setting value for the end frequency of the high-speed output CH0 (available
when the acceleration and deceleration are separate) (If D1240 < D1340, D1340 is adopted.)

D1241

High 16 bytes of the setting value for the end frequency of the high-speed output CH0
(available when the acceleration and deceleration are separate) (If D1240 < D1340, D1340 is
adopted.)

D1244

Number of idle speed output from CH0 (> 0: Effective vale; <= 0: Continuous output)

D1245

Number of idle speed output from CH1 (> 0: Effective vale; <= 0: Continuous output)

D1246

Number of idle speed output from CH2 (> 0: Effective vale; <= 0: Continuous output)

D1247

Number of idle speed output from CH3 (> 0: Effective vale; <= 0: Continuous output)

D1383:

Time difference between the direction signal and pulse output of CH2

D1384:

Time difference between the direction signal and pulse output of CH3

D1336:

Low word of the current number of output pulses of CH0

D1337:

High word of the current number of output pulses of CH0

D1338:

Low word of the current number of output pulses of CH1

DVP-PLC Application Manual

9-125

9 Application Instructions API 150-199
D1339:

High word of the current number of output pulses of CH1

D1375:

Low word of the current number of output pulses of CH2

D1376:

High word of the current number of output pulses of CH2

D1377:

Low word of the current number of output pulses of CH3

D1378:

High word of the current number of output pulses of CH3

D1340:

Start/end frequency settings of CH0 (default: K200)

D1352:

Start/end frequency settings of CH1 (default: K200)

D1379:

Start/end frequency settings of CH2 (default: K200)

D1380:

Start/end frequency settings of CH3 (default: K200)

D1348:

Deceleration time of CH0 pulse output when M1534 = On (default: K100)

D1349:

Deceleration time of CH1 pulse output when M1535 = On (default: K100)

D1350:

Deceleration time of CH2 pulse output when M1536 = On (default: K100)

D1351:

Deceleration time of CH3 pulse output when M1537 = On (default: K100)

D1343:

Acceleration/deceleration time of CH0 pulse output (default: K100)

D1353:

Acceleration/deceleration time of CH1 pulse output (default: K100)

D1381:

Acceleration/deceleration time of CH2 pulse output (default: K100)

D1382:

Acceleration/deceleration time of CH3 pulse output (default: K100)

D1478:

Close loop output/input ratio of CH2 (default: K100)

D1479:

Close loop output/input ratio of CH3 (default: K100)

9-126

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

198

D

VSPO

Type
S1
S2
S3
D

Function
Variable speed pulse output

Bit Devices
X

OP

Operands

Y

M

Word devices
S

K

H KnX KnY KnM KnS T

*
*

*
*

Program Steps
C

D
*
*
*

E

F DVSPO: 17 steps

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Target frequency of output

S2: Target number of pulses

S3: Gap time and gap frequency

D: Pulse output device (Y0, Y2, Y4, Y6)
Explanations:
1.

The instruciton only supports V2.0 of EH2 series. It does not support EH/SV series.

2.

Max frequency for S1: 100kHz. Target frequency can be modified during the execution of instruction. When S1 is
modified, VSPO will ramp up/down to the target frequency according to the ramp-up gap time and gap
frequency set in S3.

3.

S2 target number of pulses is valid only when the instruction is executed first time. S2 can NOT be modified
during the execution of instruction. S2 can be a negative value. When target number of pulses are specified with
0, PLC will perform continuous output.

4.

S3 occupies 2 consecutive 16-bit devices. S3+0 stores the gap frequency S3+1 stores the gap time. Parameter
setting can be modified during the execution of instruction. Set range for S3+0: 6Hz ~ 32767Hz; set range for
S3+0: 1ms ~ 80ms. If set value exceeds the available range, PLC will take the upper or lower bound value.

5.

D pulse output device supports Y0, Y2, Y4 and Y6. Y1, Y3, Y5 and Y7 are corresponding output direction. The
positive direction is On.

6.

Parameters set in S3 can only be modified while modifying the value in S1. When target frequency is set as 0,
PLC will ramp down to stop according to parameters set in S3. When the output is stopped, PLC will enable the
flags indicating pause status (CH0: M1538; CH1: M1539; CH2: M1540; CH3: M1541). If target frequency other
than 0 is specified again, pulse output will ramp up to target frequency and operates untill target number of
pulses are completed.

Function Explanations:
Pulse output diagram:

DVP-PLC Application Manual

9-127

9 Application Instructions API 150-199
Freq.
t2

t1
t3
Time
Pulse number
g1

g3

g2
S2

1. Definitions:
t1 Æ target frequency of 1st shift
t2 Æ target frequency of 2nd shift
t3 Æ target frequency of 3rd shift
g1 Æ ramp-up time of 1st shift
g2 Æ ramp-up time of 2nd shift
g3 Æ ramp-down time of 3rd shift

S2 Æ total output pulses
2. Explanations on each shift:
‹ 1st shift:
Assume t1 = 6kHz, gap freqency = 1kHz, gap time = 10ms
Ramp-up steps of 1st shift:
Freq.

t1=6kHz

1kHz
0Hz

Time
10ms 10ms 10ms 10ms 10ms

g1=50ms

‹ 2nd shift:
Assume t2 = 11kHz, internal frequency = 2kHz, gap time = 20ms
Ramp-up steps of 2nd shift:

9-128

DVP-PLC Application Manual

9 Application Instructions API 150-199
Freq.
t2=11kHz
1kHz
2kHz
2kHz

t1=6kHz
Time
20ms

20ms

20ms

g2=40ms

‹ 3rd shift:
Assume t3 = 3kHz, gap frequency = 2kHz, gap time = 20ms
Ramp-down steps of 3rd shift:
Freq.

Change to t3
t2=11kHz

2kHz

t3=3kHz
Time
20ms

20ms 20ms

Start to change

20ms

g3=60ms

‹ For program examples please refer to API 199
Points to note:
1.

Associated flags:
M1029:

CH0 pulse output execution is completed

M1030:

CH1 pulse output execution is completed

M1036:

CH2 pulse output execution is completed

M1037:

CH3 pulse output execution is completed

M1538:

Indicating pause status of CH0

M1539:

Indicating pause status of CH1

M1540:

Indicating pause status of CH2

M1541:

Indicating pause status of CH0

M1542:

CH0 executes the function that the constant speed output section reaches the
target frequency.

M1544:

CH1 executes the function that the constant speed output section reaches the
target frequency.

DVP-PLC Application Manual

9-129

9 Application Instructions API 150-199

2.

M1546:

CH2 executes the function that the constant speed output section reaches the
target frequency.

M1548:

CH3 executes the function that the constant speed output section reaches the
target frequency.

M1543:

CH0 executed the function that the constant speed output section reaches the
target number.

M1545:

CH1 executed the function that the constant speed output section reaches the
target number.

M1547:

CH2 executed the function that the constant speed output section reaches the
target number.

M1549:

CH3 executed the function that the constant speed output section reaches the
target number.

M1528:

Enabling the instruction DICF to execute the constant speed output section

M1529:

Enabling the instruction DICF to execute the final output section

Special register explanations:
D1336:

Low word of the present value of Y2 pulse output

D1337:

High word of the present value of Y2 pulse output

D1338:

Low word of the current number of output pulses from CH1

D1339:

High word of the current number of output pulses from CH1

D1375:

Low word of the current number of output pulses from CH2

D1376:

High word of the current number of output pulses from CH2

D1377:

Low word of the current number of output pulses from CH3

D1378:

High word of the current number of output pulses from CH3

9-130

DVP-PLC Application Manual

9 Application Instructions API 150-199
API

Mnemonic

199

D

Function

ICF

Type

Immediately change frequency

Bit Devices
X

OP

Operands

S1
S2
D

Y

M

Word devices
S

K

H KnX KnY KnM KnS T

*

*

Program Steps
C

D
*
*

E

F

DVSPO: 13 steps

*
PULSE

16-bit
32-bit
EH3
EH3
EH3
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
ES EX SS SA SX SC EH SV
SV2
SV2
SV2

Operands:
S1: Target frequency to be changed

S2: Gap time and gap frequency

D: Pulse output device (Y0, Y2)

Explanations:
1.

The instruciton only supports V2.0 of EH2 series. It does not support EH/SV series.

2.

Max frequency for S1: 100kHz. When ICF instruction executes, frequecy changing will start immediately with
ramp-up/down process.

3.

ICF instruction has to be executed after the execution of DVSPO or DPLSY instructions. When the instruction is
used together with DVSPO, operands S1, S2, D of DICF has to be assigned the same device with S1, S3, D of
DVSPO. When the instruction is used with DPLSY, operands S1 and D has to be assigned the same device with
S1 and D of DPLSY.

4.

If ICF instruction is used with DPLSY instruction, operand S2 is invalid.

5.

When ICF instruction is used with DVSPO instruction, parameter setting of S2 functions the same as S3 in
DVSPO instruction, specifying the gap time and gap frequency of ramp-up/down process.

6.

D pulse output device supports only Y0 and Y2.

7.

The instruction is suggested to be applied in interrupt subroutines for obtaining the better response time and
execution results

8.

For associated flags and registers, please refer to Points to note of API 198 DVSPO instruction.

Function Explanations:
1.

If users change the target frequency by using DVSPO instruction, the actual changing timing will be delayed due
to the program scan time and the gap time as below.
Change target freq.
Freq.

Actual timing of changing
Gap freq.

Gap Gap
time time
Delayed by program scan cycle

2.

Time

If users change the target frequency by applying DICF instruction in insterupt subroutines, the actual changing
timing will be executed immediately with only an approx. 10us delay (execution time of DICF instruction).

DVP-PLC Application Manual

9-131

9 Application Instructions API 150-199
The timing diagram is as below:
Interrupt
Actual timing of changing
Freq.

Gap freq.

Time

Gap Gap
time time
approx.10us

Program Example:
1. When M0 = ON, pulse output ramps up to 100kHz. Total shifts: 100, Gap frequency: 1000Hz, Gap time: 10ms.
Calculation of total shifts: (100,000 ﹣0) ÷ 1000 = 100.
2. When X6 external interrupt executes, target frequency is changed and ramp down to 50kHz immediately. Total
shifts: 150, Gap frequency: 800Hz, Gap time: 20ms. Calculation of total shifts: (100,000 ﹣50,000) ÷ 800 = 125
3. When X7 external interrupt executes, target frequency is changed and ramp down to 100Hz immediately. Total
shifts: 25, Gap frequency: 2000Hz, Gap time: 100ms. Calculation of total shifts: (50,000 ﹣100) ÷ 2000 = 25.
4. When pulse output reaches 100Hz, the frequency is kept constant and pulse output stops when 1,000,000 pulses
is completed.

1000Hz

800Hz
10ms
Freq.(Hz)
100KHz

20ms

2000Hz
50KHz

100ms

100Hz

Time(ms)
M0=ON

X6=ON

X7=ON

1,000,000pulse

9-132

DVP-PLC Application Manual

9 Application Instructions API 150-199
EI
M0
DMOVP K100000

D500

MOV

K1000

D502

MOV

K10

D503

DVSPO

D500

K1000000

D502

Y0

FEND
M1000
I601

DMOV

K50000

D500

MOV

K800

D502

MOV

K20

D503

DICF

D500

D502

DMOV

K0

D500

MOV

K2000

D502

MOV

K100

D503

DICF

D500

D502

Y0

IRET
M1000
I701

Y0

IRET
END

DVP-PLC Application Manual

9-133

9 Application Instructions API 150-199
MEMO

9-134

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

202

SCAL
Type

Function
Proportional Value Calculation

P

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2
S3
D

K
*
*
*

Program Steps

H KnX KnY KnM KnS T
*
*
*

C

D
*
*
*
*

E

F SCAL, SCALP: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Source value

S2: Slope

S3: Offset

D: Destination device

Explanations:
1. Range of S1, S2, S3: -32,768 ~ 32,767
2. Unit of S2: 0.001
3. See the specifications of each model for their range of use.
4. Operation equation in the instruction: D = (S1 × S2) ÷ 1,000 + S3.
Users have to obtain S2 and S3 (decimals are rounded up into 16-bit integers) by using the slope and offset
equations below.
Slope equation: S2 = [(max. destination value – min. destination value) ÷ (max. source value – min. source value)]
× 1,000
Offset equation: S3 = min. destination value – min. source value × S2 ÷ 1,000
The output curve is shown as the figure:
Destination value
Max. Destination value

D

Min.
source value

S1

Max.
source value

Source value

Min. destination value

Program Example 1:
1. Assume S1 = 500, S2 = 168, S3 = -4. When X0 = On, SCAL instruction will be executed and obtain the proportional
value at D0.
2. Equation: D0 = (500 × 168) ÷ 1,000 + (-4) = 80
X0
SCAL

DVP-PLC Application Manual

K500

K168

K-4

D0

10-1

10 Application Instructions API 200-249
Destination value

D
Offset=-4

Slope=168

Source value

S1=500

0

Program Example 2:
1. Assume S1 = 500, S2 = -168, S3 = 534. When X10 = On, SCAL instruction will be executed and obtain the
proportional value at D10.
2. Equation: D0 = (500 × -168) ÷ 1,000 + 534 = 450
X10
SCAL

K500

K-168

K534

D10

Destination value

D

Slope=-168

Offset=534

0

S 1=500

Source value

Remarks:
1. This instruction is applicable for known slope and offset. If slope and offset are unknown, use SCLP instruction for
the calculation.
2. S2 has to be within the range -32,768 ~ 32,767. If S2 falls without the range, use SCLP instruction for the
calculation.
3. When using the slope equation, please be aware that the max. source value must > min. source value, but it is
not necessary that max. destination value > min. destination value.
4. If the value of D > 32,767, D = 32,767; if the value of D < -32,768, D = -32,768.
5. Only ES_V6.2, SA/SX_V1.6, SC_V1.4, EH2/SV/EH3_V1.0 and versions above support this instruction. EH series
MPU does not support this instruction.

10-2

DVP-PLC Application Manual

10 Application Instructions API 200-249
Mnemonic
203

D

SCLP

Type

Y

Function
Parameter Proportional Value Calculation

P

Bit Devices
X

OP

Operands

M

Word Devices
S

S1
S2
D

K
*

H KnX KnY KnM KnS T
*

Program Steps
C

D
*
*
*

E

F SCLP, SCLPP: 7 steps
DSCLP, DSCLPP: 13 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Source value

S2: Parameter

D: Destination device

Explanations:
1. See the specifications of each model for the range of operands.
2. Flags: M1162 (decimal integer or binary floating point); M1162 = On -> Binary floating point
3. Settings of S2 for 16-bit instruction:
S2 occupies 4 consecutive devices in 16-bit instruction.
Device No.

Parameter

Range

S2

Maximum source value

-32,768 ~ 32,767

S2 + 1

Minimum source value

-32,768 ~ 32,767

S2 + 2

Maximum destination value

-32,768 ~ 32,767

S2 + 3

Minimum destination value

-32,768 ~ 32,767

4. Settings of S2 for 32-bit instruction:
S2 occupies 8 consecutive devices in 32-bit instruction.
Device No.

Range

Parameter

S2, S2 + 1

Maximum source value

S2 + 2, 3

Minimum source value

S2 + 4, 5

Maximum destination value

S2 + 6, 7

Minimum destination value

Integer

Floating point

-2,147,483,648 ~
2,147,483,647

Range of 32-bit
floating point

5. Operation equation in the instruction: D = [(S1 – min. source value) × (max. destination value – min. destination
value)] ÷ (max. source value – min. source value) + min. destination value
6. The operational relation between source value and destination value is as stated below:
y = kx + b
y= Destination value (D)
k= Slope = (max. destination value – min. destination value) ÷ (max. source value – min. source value)
x= Source value (S1)
b= Offset = Min. destination value – Min. source value × slope
Bring all the parameters into equation y = kx + b and obtain the equation in the instruction:
y = kx + b = D = k S1 + b = slope ×S1 + offset = slope ×S1 + min. destination value – min. source value × slope
DVP-PLC Application Manual

10-3

10 Application Instructions API 200-249
= slope × (S1 – min. source value) + min. destination value = (S1 – min. source value) × (max. destination
value – min. destination value) ÷ (max. source value – min. source value) + min. destination value
7. If S1 > max. source value, S1 = max. source value
If S1 < min. source value, S1 = min. source value
When all the input values and parameters are set, the output curve is shown as the figure:
Destination value
Max. Destination value

D

Min.
source value

S1

Max.
source value

Source value

Min. destination value

Program Example 1:
1. Assume S1 = 500, max. source value D0 = 3,000, min. source value D1 = 200, max. destination value D2 = 500,
and min. destination value D3 = 30. When X0 = On, SCLP instruction will be executed and obtain the proportional
value at D10.
2. Equation: D10 = [(500 – 200) × (500 – 30)] ÷ (3,000 – 200) + 30 = 80.35. Round off the result into an integer D10
= 80.
X0
MOV

K3000

D0

MOV

K200

D1

MOV

K500

D2

MOV

K30

D3

SCLP

K500

D0

X0
D10

Destination value

Max.
Destination=500
value
D
Min.
Destination =30
value
0

10-4

S1=500
Min.
Source =200
value

Max.
Source =3000
value

Source value

DVP-PLC Application Manual

10 Application Instructions API 200-249
Program Example 2:
1. Assume S1 = 500, max. source value D0 = 3,000, min. source value D1 = 200, max. destination value D2 = 30,
and min. destination value D3 = 500. When X0 = On, SCLP instruction will be executed and obtain the
proportional value at D10.
2. Equation: D10 = [(500 – 200) × (30 – 500)] ÷ (3,000 – 200) + 500 = 449.64. Round off the result into an integer
D10 = 450.
X0
MOV

K3000

D0

MOV

K200

D1

MOV

K30

D2

MOV

K500

D3

SCLP

K500

D0

X0
D10

Destination value

Max.
Destination =500
value
D
Min.
Destination =30
value

S1= 500
Max.
Source =3000
value

0 Min.
Source =200
value

Source value

Program Example 3:
1. Assume the source of S1 D100 = F500, max. source value D0 = F3000, min. source value D2 = F200, max.
destination value D4 = F500, and min. destination value D6 = F30. When X0 = On, set up M1162, adopt floating
point operation and execute DSCLP instruction. The proportional value will be obtained at D10.
2. Equation: D10 = [(F500 – F200) × (F500 – F30)] ÷ (F3000 – F200) + F30 = F80.35. Round off the result into an
integer D10 = F80.
X0
SET

M1162

DMOVR

F500

D100

DMOVR

F3000

D0

DMOVR

F200

D2

DMOVR

F500

D4

DMOVR

F30

D6

DSCLP

D100

D0

X0

DVP-PLC Application Manual

D10

10-5

10 Application Instructions API 200-249
Destination value

Max.
Destination =F500
value
D
Min.
Destination =F30
value

S1=F500

0 Min.
Source =F200
value

Max.
Source =F3000
value

Source value

Remarks:
1. Range of S1 for 16-bit instruction: max. source value ≥ S1 ≥ min. source value; -32,768 ~ 32,767. If the value falls
without the bounds, the bound value will be used for calculation.
2. Range of integer S1 for 32-bit instruction: max. source value ≥ S1 ≥ min. source value; -2,147,483,648 ~
2,147,483,647. If the value falls without the bounds, the bound value will be used for calculation.
3. Range of floating point S1 for 32-bit instruction: max. source value ≥ S1 ≥ min. source value; following the range of
32-bit floating point. If the value falls without the bounds, the bound value will be used for calculation.
4. Please be aware that the max. source value must > min. source value, but it is not necessary that max.
destination value > min. destination value.
5. Only ES_V6.2, SA/SX_V1.6, SC_V1.4, EH2/SV/EH3_V1.0 and versions above support this instruction. EH series
MPU does not support this instruction.

10-6

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

205

CMPT

Type

Operands

Function
Compare table

P
Bit Devices

X

OP

Y

M

Word devices
S

S1
S2
n
D

K

*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*
*
*

*

E

F CMPT: 9 steps
DCMPT: 17 steps
DCMPTP: 17 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Source device 1

S2: Source device 2

n: Data length/function

D: Destination device

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 support the 16-bit instruction. EH3_V1.20 and version above,
and SV2 support the 32-bit instruction.

2.

S1 and S2 can be T/C/D devices, for C devices only 16-bit devices are applicable (C0~C199).

3.

The high 16-bit value in the operand n used in the 32-bit instruction is an invalid value.

4.

The low 8-bit value in the operand n indicates the data length. The operand n used in the 16-bit instruction
should be within the range between 1 and 16. The operand n used in the 32-bit instruction should be within the
range between 1 and 32. PLC will take the upper/lower bound value if set value exceeds the available range.

5.

6.

The high 8-bit value in the operand n indicates the comparison condition.
Value

K0

K1

K2

K3

K4

Comparison condition

S1 = S2

S1 < S2

S1 <= S2

S1 > S2

S1 >= S2

If n used in the 16-bit instruction is set to H0108, it means that 8 pieces of data are compared to 8 pieces of data,
and the “larger than” comparison is performed. If n used in the 32-bit instruction is set to H00000320, it means
that 32 pieces data are compared to 32 pieces of data, and the “less than” comparison is performed.

7.

If the setting value for the comparison condition exceeds the range, or the firmware version does not support the
comparison condition, the default “equal to” comparison is performed. EH3_V1.20 and version above, and SV2
and versions above support the setting value for the comparison condition.

8.

The comparison values used in the 16-bit instruction are signed values. The comparison values used in the
32-bit instruction are 32-bit values (M1162=Off), or floating-point values (M1162=On).

9.

Data written in operand D will all be stored in 16-bit format or in 32-bit format. When data length is less than 16
or 32, the null bits are fixed as 0, e.g. if n = K8, bit 0~7 will be set according to compare results, and bit 8~15 will
all be 0.

10.

If the comparison result meets the condition, the corresponding bit is set to 1. Otherwise, it is set to 0.

Program example:
When M0 = ON, compare the 16-bit value in D0~D7 with D20~D27 and store the results in D100.
M0
CMPT

D0

DVP-PLC Application Manual

D20

K8

D100

10-7

10 Application Instructions API 200-249
y

y

y

Content in D0~D7:
No.

D0

D1

D2

D3

D4

D5

D6

D7

Value

K10

K20

K30

K40

K50

K60

K70

K80

Content in D20~D27:
No.

D20

D21

D22

D23

D24

D25

D26

D27

Value

K12

K20

K33

K44

K50

K66

K70

K88

After the comparison of CMPT instruction, the associated bit will be 1 if two devices have the same value, and

other bits will all be 0. Therefore the results in D100 will be as below:

D100

Bit0

Bit1

Bit2

Bit3

Bit4

Bit5

Bit6

Bit7

Bit8~15

0

1

0

0

1

0

1

0

0…0

H0052 (K82)

10-8

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

206

ASDRW

Type

Function
ASDA servo drive R/W

Bit Devices
X

OP

Operands

Y

M

Word devices
S

S1
S2
S

K
*
*

H KnX KnY KnM KnS T
*
*

Program Steps
C

D
*
*
*

E

F ASDRW: 7 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Address of servo drive (K0~K254)

S2: Function code

S: Register for read/written data

Explanations:
1.

ASDRW communication instruction supports COM2 (RS-485) and COM3 (RS-485)

2.

S1: station number of servo drive. Range: K0~K254. K0 indicates broadcasting, i.e. PLC will not receive
feedback data.

3.

S2: function code. Please refer to the table below.

4.

S: Register for read/written data. Please refer to the table below for explanations.

5.

Explanations of function code:
Exclusively for ASDA of A-type, AB type, A+ type, B type
Code

Function

K0(H0) Status monitor

Parameter

Com. Addr.

Read/Write data (Settings)

P0-04 ~ P0-08 0004H ~ 0008H S+0 ~ S+4: Please refer to
explanations in ASDA
manuals.

K1(H1) Block Data Read

P0-09 ~ P0-16 0009H ~ 0010H S+0 ~ S+7: Please refer to

Register

explanations in ASDA
manuals. B Type is not
supported.

K2(H2) Block Data Write

P0-09 ~ P0-16 0009H ~ 0010H S+0 ~ S+7: Please refer to

Register

explanations in ASDA
manuals. B Type is not
supported.

K3(H3) JOG Operation

P4-05

0405H

S: Range: 1~3000, 4999, 4998,
5000

K4(H4) Servo ON/OFF

P2-30

021EH

S: K1 = ON, Others = OFF

K5(H5) Speed Command P1-09 ~ P1-11 0109H ~ 010BH S+0 ~ S+2: Range:
(3 sets)

-5000~+5000

K6(H6) Torque Command P1-12 ~ P1-14 010CH ~ 010EH S+0 ~ S+2: Range:
(3 sets)

DVP-PLC Application Manual

-300~+300

10-9

10 Application Instructions API 200-249
For A2-type only
Code

Function

K16(H10) Status monitor

Parameter

Com. Addr.

Read/Write data (Settings)

P0-09 ~ P0-13 0012H ~ 001BH S+0 ~ S+9: Please refer to

(Read)

explanations in ASDA-A2
manual.

K17(H11) Status monitor

P0-17 ~ P0-21 0022H ~ 002BH S+0 ~ S+9: Please refer to

selection (Write)

explanations in ASDA-A2
manual.

K18(H12) Mapping

P0-25 ~ P0-32 0032H ~ 0041H S+0 ~ S+15: Please refer to

parameter (Write)

explanations in ASDA-A2
manual.

K19(H13) JOG Operation

P4-05

040AH

S: Range:
1~5000, 4999, 4998, 0

K20(H14) Auxiliary Function P2-30

023CH

S: K1 = ON, Others = OFF

(Servo ON/OFF)
K21(H15) Speed Command P1-09 ~ P1-11 0112H ~ 0117H S+0 ~ S+5: Range:
(3 sets)

-60000~+60000

K22(H16) Torque Command P1-12 ~ P1-14 0118H ~ 011DH S+0 ~ S+5: Range: -300~+300
(3 sets)
K23(H17) Block Data Read / P0-35 ~ P0-42 0046H~ 0055H

S+0 ~ S+15: Please refer to

Write Register

explanations in ASDA-A2

(for mapping

manual.

parameter )
6.

For relative M flags and special D registers, please refer to explanations of API 80 RS instruction.

Program example 1: COM2 (RS-485)
1.

When X0 = ON, PLC will send out communication commands by COM2 to read status of servo drive.

2.

When PLC received the feedback data from ASDA, M1127 will be active and the read data will be stored in
D0~D4.

10-10

DVP-PLC Application Manual

10 Application Instructions API 200-249
M1002
MOV

H87

SET

M1120

MOV

K100

RST

M1143

SET

M1122

ASDRW

K1

X0

D1120

Set communication protocol as 9600,8,E,1

Retain communication setting

D1129

Set time-out value as 100ms

Set up in ASCII mode

SET

M1143

Sending request

X0
K0

D0
Data Register
Function Code: K0

Monitor ASDA status

M1127

ASDA address: K1

Processing received data
ASCII mode: Store the received data into specified registers D0~D4 in Hex
RTU mode:Store the received data into specified registers D0~D4 in Hex

RST

M1127

Reset communication completed flag M1127

Program example 2: COM3(RS-485)
1.

When M0 = ON, PLC sends communication commands by COM3 to read servo drive status.

2.

When PLC received the feedback data from ASDA, M1318 will be active and the read data will be stored in
D0~D4.
M1002
MOV

H87

SET

M1136

MOV

K100

RST

M1320

SET

M1316

ASDRW

K1

M0

D1109

Set communication protocol as 9600,8,E,1

Retain communication setting

D1252

Set reveiving time-out as 100ms

Set up in ASCII mode

SET

M1320

Set up in RTU mode

Sending request

M0
K0

D0
Data Register
Function Code: K0

Monitor ASDA status
ASDA address: K1

M1318
Processing received data

ASCII mode: Store the received data into specified registers D0~D4 in Hex
RTU mode:Store the received data into specified registers D0~D4 in Hex

RST

M1318

Reset communication completed flag M1318

Points to note:
DVP-PLC Application Manual

10-11

10 Application Instructions API 200-249
Relative flags and special D registers of COM2/COM3 :
COM2

COM3

M1120

M1136

Retain communication setting

Protocol

M1143

M1320

ASCII/RTU mode selection

setting

D1120

D1109

Communication protocol

D1121

D1255

PLC communication address

Sending

M1122

M1316

Sending request

request

D1129

D1252

Communication timeout setting (ms)

M1127

M1318

Data receiving completed

-

M1319

Data receiving error

-

D1253

Communication error code

M1129

-

M1140

-

Receiving
completed

Errors

Function Description

Communication timeout setting (ms)
COM2 (RS-485) MODRD/MODWR/MODRW data
receiving error
MODRD/MODWR/MODRW parameter error (Exception

M1141

-

Code exists in received data)

Exception Code is stored

in D1130
D1130

10-12

-

COM2 (RS-485) Error code (exception code) returning
from Modbus communication

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

207

CSFO
Type

OP
S
S1
D

Operands

Function
Catch speed and proportional output

Bit Devices
X
*

Y

M

Word devices
S

K

H KnX KnY KnM KnS T

Program Steps
C

D

E

F CSFO: 7 steps

*
*
PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S: Source device of signal input (Only X0~X3 are available)
S1: Sample time setting and the input speed information
D: Output proportion setting and output speed information
Explanations:
1.

When S specifies X0, PLC only uses X0 input point and its associated high speed pulse output: Y0, in this case
Y1 is normal output point. When S specifies X1, PLC uses X0 (A phase) and X1 (B phase) input points and their
associated output: Y0 (Pulse) / Y1 (Dir).

2.

The execution of CSFO requires hardware high speed counter function as well as the high speed output
function. Therefore, when program scan proceeds to CSFO instruction with high speed counter input points (X0,
X1) enabled by DCNT instruction, or high speed pulse outputs (Y0, Y1) enabled by other high speed output
instructions, CSFO instruction will not be activated.

3.

If S specifies X1 with 2-phase 2 inputs, the counting mode is fixed as quadruple frequency.

4.

During pulse output process of Y0, special registers (D1337, D1336) storing the current number of output pulses
will be updated when program scan proceeds to this instruction.

5.

S1 occupies consecutive 4 16-bit registers. S1 +0 specifies the sampling times, i.e. when S1 +0 specifies K1,
PLC catches the speed every time when 1 pulse is outputted. Valid range for S1 +0 in 1-phase 1-input mode:
K1~K100, and 2-phase 2-input mode: K2~K100. If the specified value exceeds the valid range, PLC will take the
lower/upper bound value as the set value. Sample time can be changed during PLC operation, however the
modified value will take effect until program scan proceeds to this instruction. S1+1 indicates the latest speed
sampled by PLC (Read-only). Unit: 1Hz. Valid range: ±10kHz. S1+2 and S1+3 indicate the accumulated number
of pulses in 32-bit data (Read-only).

6.

For single phase input, the max frequency is 10kHz; for 2-phase 2 inputs, the max frequency is 2kHz.

7.

D occupies 3 consecutive 16-bit registers. D +0 specifies the output proportion value. Valid range: K1 (1%) ~
K10000 (10000%). If the specified value exceeds the valid range, PLC will take the lower/upper bound value as
the set value. Output proportion can be changed during PLC operation, however the modified value will take
effect until program scan proceeds to this instruction. D+2 and D+1 indicates the output speed in 32-bit data.
Unit: 1Hz. Valid range: ±100kHz.

8.

The speed sampled by PLC will be multiplied with the output proportion D+0, then PLC will generate the actual
output speed. PLC will take the integer of the calculated value, i.e. if the calculated result is smaller than 1Hz,

DVP-PLC Application Manual

10-13

10 Application Instructions API 200-249
PLC will output with 0Hz. For example, input speed: 10Hz, output proportion: K5 (5%), then the calculation
result will be 10 x 0.05 = 0.5Hz. Pulse output will be 0Hz; if output proportion is modified as K15 (15%), then the
calculation result will be 10 x 0.15 = 1.5Hz. Pulse output will be 1Hz.
Program Example:
1.

If D0 is set as K2, D10 is set as K100:
When the sampled speed on (X0, X1) is +10Hz (D1 = K10), (Y0, Y1) will output pulses with +10Hz (D12, D11 =
K10); When the sampled speed is -10Hz (D1 = K-10), (Y0, Y1) will output pulses with -10Hz (D12, D11 = K-10)

2.

If D0 is set as K2, D10 is set as K1000:
When the sampled speed on (X0, X1) is +10Hz (D1 = K10), (Y0, Y1) will output pulses with +100Hz (D12, D11 =
K100); When the sampled speed is -100Hz (D1 = K-100), (Y0, Y1) will output pulses with -100Hz (D12, D11 =
K-100)

3.

If D0 is set as K10, D10 is set as K10:
When the sampled speed on (X0, X1) is +10Hz (D1 = K10), (Y0, Y1) will output pulses with +1Hz (D12, D11 =
K1); When the sampled speed is -10Hz (D1 = K-10), (Y0, Y1) will output pulses with -1Hz (D12, D11 = K-1)
M0
CSF O

10-14

X1

D0

D10

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

215~
D
217

Bit Devices
X

Function
Contact Logical Operation LD#

LD#

Type
OP

Operands

Y

M

Word Devices
S

K
*
*

S1
S2

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F LD#: 5 steps
* DLD#: 9 steps
*

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Data source device 1

S2: Data source device 2

Explanations:
1.

See the specifications of each model for the range of operands.

2.

This instruction compares the content in S1 and S2. If the result is not “0”, the continuity of the instruction is
enabled. If the result is “0”, the continuity of the instruction is disabled.

3.

LD# instruction is used for direct connection with BUS.
API No.
215

16 -bit
instruction
LD&

32 -bit
instruction
DLD&

Continuity
condition
S1 & S2 ≠ 0

No-continuity
condition
S1 & S2 = 0

216

LD|

DLD|

S1 | S2 ≠ 0

S1 | S2 = 0

217

LD^

DLD^

S1 ^ S2 ≠ 0

S1 ^ S2 = 0

4.

&: Logical “AND” operation

5.

|: Logical “OR” operation

6.

^: Logical “XOR” operation

7.

When 32-bit counters (C200 ~ C255) are used in this instruction for comparison, make sure to adopt 32-bit
instruction (DLD#). If 16-bit instructions (LD#) is adopted, a “program error” will occur and the ERROR
indicator on the MPU panel will flash.

Program Example:
1.

When the result of logical AND operation of C0 and C10 ≠ 0, Y10 = On.

2.

When the result of logical OR operation of D200 and D300 ≠ 0 and X1 = On, Y11 = On will be retained.

3.

When the result of logical XOR operation of C201 and C200 ≠ 0 or M3 = On, M50 = On.
LD &

C0

Y10

C10
X1

LD I

D200

D300

SET

DLD ^

C201

C200

M50

Y011

M3

DVP-PLC Application Manual

10-15

10 Application Instructions API 200-249
API
Mnemonic
218~
D AND#
220
Type

Function
Contact Logical Operation AND#

Bit Devices
X

OP

Operands

Y

M

Word Devices
S

S1
S2

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F AND#: 5 steps
* DAND#: 9 steps
*

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Data source device 1

S2: Data source device 2

Explanations:
1. See the specifications of each model for the range of operands.
2. This instruction compares the content in S1 and S2. If the result is not “0”, the continuity of the instruction is
enabled. If the result is “0”, the continuity of the instruction is disabled.
3. AND# is an operation instruction used on series contacts.
16 -bit
instruction

API No.

32 -bit
instruction

Continuity
condition

No-continuity
condition

S1 & S2 ≠ 0
S1 | S2 ≠ 0
S1 ^ S2 ≠ 0

S1 & S2 = 0
S1 | S2 = 0
S1 ^ S2 = 0

218

AND&

DAND&

219

AND|

DAND|

220

AND^

DAND^

4. &: Logical “AND” operation
5. |: Logical “OR” operation
6. ^: Logical “XOR” operation
7. When 32-bit counters (C200 ~ C255) are used in this instruction for comparison, make sure to adopt 32-bit
instruction (DAND#). If 16-bit instructions (AND#) is adopted, a “program error” will occur and the ERROR
indicator on the MPU panel will flash.
Program Example:
1. When X0 = On and the result of logical AND operation of C0 and C10 ≠ 0, Y10 = On.
2. When X1 = Off and the result of logical OR operation of D10 and D0 ≠ 0 and X1 = On, Y11 = On will be retained.
3. When X2 = On and the result of logical XOR operation of 32-bit register D200 (D201) and 32-bit register D100
(D101) ≠ 0 or M3 = On, M50 = On.
X0
AND &

C0

C10

Y10

AND I

D10

D0

SET

DAND ^

D200

D100

M50

X1
Y11

X2
M3

10-16

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

221~
D
223

Operands

Contact Logical operation OR#

OR#

Type

Bit Devices
X

OP

Function

Y

M

Word Devices
S

S1
S2

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F OR#: 5 steps
* DOR#: 9 steps
*

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Data source device 1

S2: Data source device 2

Explanations:
1. See the specifications of each model for the range of operands.
2. This instruction compares the content in S1 and S2. If the result is not “0”, the continuity of the instruction is
enabled. If the result is “0”, the continuity of the instruction is disabled.
3. OR# is an operation instruction used on parallel contacts.
16 -bit
instruction

API No.

32 -bit
instruction

Continuity
condition

No-continuity
condition

221

OR&

DOR&

S1 & S2 ≠ 0

S1 & S2 = 0

222

OR|

DOR|

S1 | S2 ≠ 0

S1 | S2 = 0

223

OR^

DOR^

S1 ^ S2 ≠ 0

S1 ^ S2 = 0

4. &: Logical “AND” operation
5. |: Logical “OR” operation
6. ^: Logical “XOR” operation
7. When 32-bit counters (C200 ~ C255) are used in this instruction for comparison, make sure to adopt 32-bit
instruction (DOR#). If 16-bit instructions (OR#) is adopted, a “program error” will occur and the ERROR
indicator on the MPU panel will flash.
Program Example:
1. When X1 = On and the result of logical AND operation of C0 and C10 ≠ 0, Y10 = On.
2. M60 will be On when X2 = On and M30 = On, or the result of logical OR operation of 32-bit register D10 (D11)
and 32-bit register D20 (D21) ≠ 0, or the result of logical XOR operation of 32-bit register D200 (D201) and
32-bit counter C235 ≠ 0.
X1
Y0
OR &
X2

C0

C10

M30
M60

DOR I

D10

D20

DOR ^

D100

D200

DVP-PLC Application Manual

10-17

10 Application Instructions API 200-249
API

Mnemonic

224~
D
230

Operands

Function

LD※

LoaD Compare

Bit Devices

Type
X

OP

Y

M

Word Devices
S

S1
S2

Program Steps

K

H KnX KnY KnM KnS T

C

D

E

F LD※: 5 steps

*
*

*
*

*
*

*
*

*
*

* DLD※: 9 steps
*

*
*

*
*

*
*

*
*

*
*

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Data source device 1

S2: Data source device 2

Explanations:
1.

See the specifications of each model for the range of operands.

2.

This instruction compares the content in S1 and S2. Take API224 (LD=) for example, if the result is “=”, the
continuity of the instruction is enabled. If the result is “≠”, the continuity of the instruction is disabled.

3.

LD※ instruction is used for direct connection with BUS.

224

16 -bit
instruction
LD =

32 -bit
instruction
DLD =

Continuity
condition
S1 = S2

No-continuity
condition
S1 ≠ S2

225

LD >

DLD >

S1 > S2

S1 ≤ S2

226

LD <

DLD <

S1 < S2

S1 ≥ S2

228

LD < >

DLD < >

S1 ≠ S2

S1 = S2

229

LD < =

DLD < =

S1 ≤ S2

S1 > S2

230

LD > =

DLD > =

S1 ≥ S2

S1 < S2

API No.

4.

When 32-bit counters (C200 ~ C255) are used in this instruction for comparison, make sure to adopt 32-bit
instruction (DLD※). If 16-bit instructions (LD※) is adopted, a “program error” will occur and the ERROR
indicator on the MPU panel will flash.

Program Example:
1.

When the content in C10 = K200, Y10 = On.

2.

When the content in D200 > K-30 and X1 = On, Y11= On will be retained.

3.

When the content in C200 < K678,493 or M3 = On, M50 = On.
Y10

LD=

K200

C10

LD>

D200

K-30

SET

C200

M50

X1

DLD> K678493

Y11

M3

10-18

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

232~
D
238

Operands

AND※

Type

AND Compare

Bit Devices
X

OP

Function

Y

M

Word Devices
S

S1
S2

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F AND※: 5 steps
* DAND※: 9 steps
*

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Data source device 1

S2: Data source device 2

Explanations:
1.

See the specifications of each model for the range of operands.

2.

This instruction compares the content in S1 and S2. Take API232 (AND=) for example, if the result is “=”, the
continuity of the instruction is enabled. If the result is “≠”, the continuity of the instruction is disabled.

3.

AND※ is a comparison instruction is used on series contacts.
16 –bit
instruction

API No.

4.

32 –bit
instruction

Continuity
condition

No-continuity
condition

232

AND =

DAND =

S1 = S2

S1 ≠ S2

233

AND >

DAND >

S1 > S2

S1 ≤ S2

234

AND <

DAND <

S1 < S2

S1 ≥ S2

236

AND < >

DAND < >

S1 ≠ S2

S1 = S2

237

AND < =

DAND < =

S1 ≤ S2

S1 > S2

238

AND > =

DAND > =

S1 ≥ S2

S1 < S2

When 32-bit counters (C200 ~ C255) are used in this instruction for comparison, make sure to adopt 32-bit
instruction (DAND※). If 16-bit instructions (AND※) is adopted, a “program error” will occur and the ERROR
indicator on the MPU panel will flash.

Program Example:
1. When X0 = On and the content in C10 = K200, Y10 = On.
2. When X1 = Off and the content in D0 ≠ K-10, Y11= On will be retained.
3. When X2 = On and the content in 32-bit register D0 (D11) < 678,493 or M3 = On, M50 = On.
X0
AND=

K200

C10

Y10

AND<>

K-10

D0

SET

D10

M50

X1
Y11

X2
DAND> K678493
M3

DVP-PLC Application Manual

10-19

10 Application Instructions API 200-249
API

Mnemonic

240~
D
246

Operands

OR※

Type

OR Compare

Bit Devices
X

OP

Function

Y

M

Word Devices
S

S1
S2

K
*
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E
*
*

F OR*: 5 steps
* DOR*: 9 steps
*

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Data source device 1

S2: Data source device 2

Explanations:
1.

See the specifications of each model for the range of operands.

2.

This instruction compares the content in S1 and S2. Take API240 (OR=) for example, if the result is “=”, the
continuity of the instruction is enabled. If the result is “≠”, the continuity of the instruction is disabled.

3.

OR※ is an comparison instruction used on parallel contacts.
16 -bit
instruction

API No.

4.

32 -bit
instruction

Continuity
condition

No-continuity
condition

240

OR =

DOR =

S1 = S2

S1 ≠ S2

241

OR >

DOR >

S1 > S2

S1 ≤ S2

242

OR <

DOR <

S1 < S2

S1 ≥ S2

244

OR < >

DOR < >

S1 ≠ S2

S1 = S2

245

OR < =

DOR < =

S1 ≤ S2

S1 > S2

246

OR > =

DOR > =

S1 ≥ S2

S1 < S2

When 32-bit counters (C200 ~ C255) are used in this instruction for comparison, make sure to adopt 32-bit
instruction (DOR※). If 16-bit instructions (OR※) is adopted, a “program error” will occur and the ERROR
indicator on the MPU panel will flash.

Program Example:
1.

When X1 = On and the present value of C10 = K200, Y0 = On.

2.

M60 will be On when X2 = On, M30 = On and the content in 32-bit register D100 (D101) ≥ K100,000.
X1
Y0
OR=
X2

K200

C10

M30
M60

DOR>
=

10-20

D100

K100000

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

266

D

Function
Output Specified Bit of a Word

BOUT

Type

Bit Devices
X

OP

Operands

Y

M

Word devices
S

D
n

K
*

H KnX KnY KnM KnS
*
*
*
*
*
*
*
*

T
*
*

Program Steps
C
*
*

D
*
*

E

F BOUT: 5 steps

*

*

DBOUT: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
D: Destination output device

n: Device specifying the output bit

Explanations:
1. EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the dunction.
2. Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction.
3. BOUT instruction performs bit output on the output device according to the value specified by operand n.
Status of Coils and Associated Contacts:
BOUT instruction
Evaluation result

Coil

Associated Contacts
NO contact(normally open) NC contact(normally closed)

FALSE

OFF

Current blocked

Current flows

TRUE

ON

Current flows

Current blocked

Program Example:
X0

X1
BOUT

K4Y0

D0

Instruction:

Operation:

LDI

X0

Load NC contact X0

AND

X1

Connect NO contact
X1 in series.

BOUT

K4Y0 D0 When D0 = k1,
executes output on Y1
When D0 = k2,
executes output on Y2

DVP-PLC Application Manual

10-21

10 Application Instructions API 200-249
API

Mnemonic

267

D

Operands

Function
Set ON Specified Bit of a Word

BSET

Type

Bit Devices
X

OP

Y

M

D
n

Word devices
S

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E

F BSET: 5 steps

*

*

DBSET: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
D: Destination device to be Set ON

n: Device specifying the bit to be Set ON

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction.

3.

When BSET instruction executes, the output device specified by operand n will be On and latched. To reset the
On state of the device, BRST instruction is required.

Program Example:
X0

X1
BSET

K4Y0

D0

Instruction:

Operation:

LDI

X0

Load NC contact X0

AND

X1

Connect NO contact
X1 in series.

BSET

K4Y0 D0 When D0 = k1,
Y1 is ON and latched
When D0 = k2,
Y2 = ON and latched

10-22

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

268

D

Operands

Function
Reset Specified Bit of a Word

BRST

Type

Bit Devices
X

OP

Y

M

Word devices
S

D
n

K
*

H KnX KnY KnM KnS
*
*
*
*
*
*
*
*

T
*
*

Program Steps
C
*
*

D
*
*

E

F BRST: 5 steps

*

*

DBRST: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
D: Destination device to be reset

n: Device specifying the bit to be reset

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction.

3.

When BRST instruction executes, the output device specified by operand n will be reset (OFF).

Program Example:
X0
BRST

K4Y0

D0

Instruction:

Operation:

LD

X0

Load NO contact X0

BRST

K4Y0 D0 When D0 = k1,
Y1 is OFF
When D0 = k2,
Y2 = OFF

DVP-PLC Application Manual

10-23

10 Application Instructions API 200-249
API

Mnemonic

269

D

Operands

Function
Load NO Contact by Specified Bit

BLD

Type

Bit Devices
X

OP

Y

M

S
n

Word devices
S

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E

F BLD: 5 steps

*

*

DBLD: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S: Reference source device

n: Reference bit

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction.

3.

BLD instruction is used to load NO contact whose contact state is defined by the reference bit n in reference
device D, i.e. if the bit specified by n is ON, the NO contact will be ON, and vice versa.

Program Example:
BLD

D0

K3

Y0

Instruction:

Operation:

BLD

Load NO contact X0 with bit

D0 K3

Status of bit3 in D0
OUT

10-24

Y0

Device coil Y0

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

270

D

Operands

Function
Load NC Contact by Specified Bit

BLDI

Type

Bit Devices
X

OP

Y

M

Word devices
S

S
n

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E

F BLDI: 5 steps

*

*

DBLDI: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S: Reference source device

n: Reference bit

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction.

3.

BLD instruction is used to load NC contact whose contact state is defined by the reference bit n in reference
device D, i.e. if the bit specified by n is ON, the NC contact will be ON, and vice versa.

Program Example:
BLDI

D0

K1

Y0

Instruction:

Operation:

BLDI

Load NC contact with bit

D0 K1

status of bit1 in D0
OUT

DVP-PLC Application Manual

Y0

Drive coil Y0

10-25

10 Application Instructions API 200-249
API

Mnemonic

271

D

Operands

Function
Connect NO Contact in Series by Specified Bit

BAND

Type

Bit Devices
X

OP

Y

M

Word devices
S

S
n

K
*

H KnX KnY KnM KnS
*
*
*
*
*
*
*
*

T
*
*

Program Steps
C
*
*

D
*
*

E

F BAND: 5 steps

*

*

DBAND: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S: Reference source device

n: Reference bit

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction.

3.

BAND instruction is used to connect NO contact in series. The current state of the contact which is connected in
series is read, and then the logical AND operation is performed on the current state and the previous logical
operation result. The final result is stored in the accumulative register.

Program Example:
X1
BAND

D0

K0

Y0

Instruction:

Operation:

LDI

X1

Load NC contact X1

BAND

D0 K0

Connect NO contact in series,
whose state is defined by
bit0 of D0

OUT

10-26

Y0

Drive coil Y0

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

272

D

Operands

Function
Connect NC Contact in Series by Specified Bit

BANI

Type

Bit Devices
X

OP

Y

M

Word devices
S

S
n

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E

F BANI: 5 steps

*

*

DBANI: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S: Reference source device

n: Reference bit

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction.

3.

BANI instruction is used to connect NC contact in series. The current state of the contact which is connected in
series is read, and then the logical AND operation is performed on the current state and the previous logical
operation result. The final result is stored in the accumulative register.

Program Example:
X1
BANI

D0

K0

Y0

Instruction:

Operation:

LDI

X1

Load NC contact X1

BANI

D0 K0

Connect NC contact in series,
whose state is defined by
bit0 of D0

OUT

DVP-PLC Application Manual

Y0

Drive coil Y0

10-27

10 Application Instructions API 200-249
API

Mnemonic

273

D

Operands

Function
Connect NO Contact in Parallel by Specified Bit

BOR

Type

Bit Devices
X

OP

Y

M

S
n

Word devices
S

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E

F BOR: 5 steps

*

*

DBOR: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S: Reference source device

n: Reference bit

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction.

3.

BOR instruction is used to connect NO contact in parallel. The current state of the contact which is connected in
series is read, and then the logical OR operation is performed on the current state and the previous logical
operation result. The final result is stored in the accumulative register.

Program Example:
X0
Y1
BOR

D0

K0

Instruction:

Operation:

LD

X0

Load NO contact X0

BOR

D0 K0 Connect NO contact in
parallel, whose state is
defined by bit0 of D0

OUT

10-28

Y1

Drive coil Y1

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

274

D

Operands

Function
Connect NC Contact in Parallel by Specified Bit

BORI

Type

Bit Devices
X

OP

Y

M

Word devices
S

S
n

K
*

H KnX KnY KnM KnS T
*
*
*
*
*
*
*
*
*
*

Program Steps
C
*
*

D
*
*

E

F BORI: 5 steps

*

*

DBORI: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S: Reference source device

n: Reference bit

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

Available range for the value in operand n: K0~K15 for 16-bit instruction; K0~K31 for 32-bit instruction.

3.

BORI instruction is used to connect NC contact in parallel. The current state of the contact which is connected in
series is read, and then the logical OR operation is performed on the current state and the previous logical
operation result. The final result is stored in the accumulative register.

Program Example:
X0
Y1
BORI

D0

K0

Instruction:

Operation:

LD

X0

Load NO contact X0

BORI

D0 K0 Connect NC contact in
parallel, whose state is
defined by bit0 of D0

OUT

DVP-PLC Application Manual

Y1

Drive coil Y1

10-29

10 Application Instructions API 200-249
API

Mnemonic

Operands

275~
FLD※
280

Function
Floating Point Contact Type Comparison

Type

Bit Devices
X

OP

Y

M

Word devices
S

K

S1
S2

H KnX KnY KnM KnS T
*
*

Program Steps
C
*
*

D
*
*

E

F FLD※: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Source device 1

S2: Source device 2

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

This instruction compares the content in S1 and S2. Take API275 (FLD=) for example, if the result is “=”, the
continuity of the instruction is enabled. If the result is “≠”, the continuity of the instruction is disabled.

3.

The user can specify the floating point value directly into operands S1 and S2 (e.g. F1.2) or store the floating
point value in D registers for further operation.

4.

FLD※ (※: =, >, <, <>, ≤, ≥) instruction is used for direct connection with left hand bus bar.
API No.

32 -bit instruction

Continuity condition

Discontinuity condition

275

FLD=

S1=S2

S1≠S2

276

FLD>

S1>S2

S1≦S2

277

FLD<

S1<S2

S1≧S2

278

FLD<>

S1≠S2

S1=S2

279

FLD<=

S1≦S2

S1>S2

280

FLD>=

S1≧S2

S1<S2

Program Example:
When the content in D200(D201) ≤ F1.2 and X1 is ON, Y21 = ON and latched.
X1
FLD<=

10-30

D200

F1.2

SET

Y21

DVP-PLC Application Manual

10 Application Instructions API 200-249
API

Mnemonic

Operands

Function

281~
FAND※
286
Type

Bit Devices
X

OP

Floating Point Serial Type Comparison

Y

M

Word devices
S

S1
S2

K

H KnX KnY KnM KnS T
*
*

Program Steps
C
*
*

D
*
*

E

F FAND※: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Source device 1

S2: Source device 2

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

This instruction compares the content in S1 and S2. Take API281 (FAND =) for example, if the result is “=”, the
continuity of the instruction is enabled. If the result is “≠”, the continuity of the instruction is disabled.

3.

The user can specify the floating point value directly into operands S1 and S2 (e.g. F1.2) or store the floating
point value in D registers for further operation.

4.

FAND※ (※: =, >, <, <>, ≤, ≥) instruction is used for serial connection with contacts.
API No.

32-bit instruction

Continuity condition

Discontinuity condition

281

FAND=

S1=S2

S1≠S2

282

FAND>

S1>S2

S1≦S2

283

FAND<

S1<S2

S1≧S2

284

FAND<>

S1≠S2

S1=S2

285

FAND<=

S1≦S2

S1>S2

286

FAND>=

S1≧S2

S1<S2

Program Example:
When X1 is OFF and the content in D0(D1) does not equal to F1.2, Y21 = ON and latched.
X1
FAND<>

F1.2

DVP-PLC Application Manual

D0

SET

Y21

10-31

10 Application Instructions API 200-249
API

Mnemonic

Operands

287~
FOR※
292
Type

Function
Floating Point Parallel Type Comparison

Bit Devices
X

OP

Y

M

Word devices
S

K

S1
S2

H KnX KnY KnM KnS T
*
*

Program Steps
C
*
*

D
*
*

E

F FOR※: 9 steps

PULSE
16-bit
32-bit
ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3 ES EX SS SA SX SC EH SV EH3

Operands:
S1: Source device 1

S2: Source device 2

Explanations:
1.

EH2/SV_V1.9 and versions above, and EH3/SV2 supports the function. EH series does not support the
dunction.

2.

This instruction compares the content in S1 and S2. Take API287 (FOR =) for example, if the result is “=”, the
continuity of the instruction is enabled. If the result is “≠”, the continuity of the instruction is disabled

3.

The user can specify the floating point value directly into operands S1 and S2 (e.g. F1.2) or store the floating
point value in D registers for further operation.

4.

OR※ (※: =, >, <, <>, ≤, ≥) instruction is used for parallel connection with contacts.
API No.

32-bit instruction

Continuity condition

Discontinuity condition

287

FOR=

S1=S2

S1≠S2

288

FOR>

S1>S2

S1≦S2

289

FOR<

S1<S2

S1≧S2

290

FOR<>

S1≠S2

S1=S2

291

FOR<=

S1≦S2

S1>S2

292

FOR>=

S1≧S2

S1<S2

Program Example:
When both X2 and M30 are OFF and the content in D100(D101) ≥ F1.234, M60 = ON..
X2

M30
M60

FOR>=

10-32

D100

F1.234

DVP-PLC Application Manual

11 Appendix
11.1 Appendix A: Table for Self-Detecting Abnormality
When you encounter abnormality using the product, you can analyze the problem first by doing the self
detections below.
Abnormality

Possible cause

Suggested correction

Loosened terminal block

Check if the removable terminal block is
loosened.

The input counting specification may not
match the pulse output frequency of the
PLC model in use.

Check if the hardware is normal by
low-frequency pulse counting.

The length of communication cable

Make sure the RS-232 cable is at least 3
meters long to ensure normal
communication (specification unknown).

Incorrect communication protocol or
address setting

Broadcast from station 0 first by RS-232
to search for communication protocol and
address and later confirm by RS-485
communication.

Extension module unable
to work

Poor connection or MPU problem

Make sure the MPU is tightly connected
to the extension module and compare to
make sure whether the problem lies in
the MPU or the extension module.

Counter (input point)
abnormality

The applicable frequency exceeds the
maximum bandwidth.

The frequency should be within the
allowed PLC specifications.

ERROR LED flashes

Incorrect program syntax

Record the error code first, and write
whether the ERROR LED should not
flash anymore by syntactically correct
program. Model with battery should be
checked whether the time of RTC is
correct (not being correct means the
battery might once be unattached,
causing reset of time).

L.V. LED On

Low input power supply

Make sure the power supply voltage is
normal.

RUN LED Off after
execution

There is no program inside the new
PLC, resulting in misjudgment.

Write in the program first.

Output point abnormality

Communication
abnormality

DVP-PLC Application Manual

11-1

11 Appendix
11.2

Appendix B: MPU Terminal Layout
„ For ES series MPU
S/S X4

DVP14ES00R2/T2

X5 X6 X7
X0 X1 X2 X3

( AC Power IN, DC Signal IN )

Y0 Y1 Y2 Y3 Y4
C0 C1 C2 C3 Y5

S/S X4 X5 X6 X7 C0 Y2 C1 Y5
X0 X1 X2 X3 Y0 Y1 Y3 Y4

DVP20EX00R2/T2
( AC Power IN, DC Signal IN )

S/S X4 X5 X6 X7 C0 Y2 C1 Y5
X0 X1 X2 X3 Y0 Y1 Y3 Y4

DVP20EX11R2/T2
( DC Power IN, DC Signal IN )

S/S X10 X11 X12 X13 X14 X15 X16 X17
X0 X1 X2 X3 X4 X5 X6 X7

DVP24ES00R2/T2
( AC Power IN, DC Signal IN )

Y0

Y1
C0 C1

S/S

DVP30ES00R2

Y2 Y3
C2 C3

Y6 Y7
C6 C7

X0 X2 X4 X6 X10 X12 X14 X16 X20
X1 X3 X5 X7 X11 X13 X15 X17 X21

( AC Power IN, DC Signal IN )

Y0

S/S

DVP30ES00T2

Y4 Y5
C4 C5

X0

Y1 Y2 Y3
C0 C1 C2

Y4 Y6
C3 Y5 Y7

Y10 Y12
C4 Y11 Y13

X2 X4 X6 X10 X12 X14 X16 X20
X1 X3 X5 X7 X11 X13 X15 X17 X21

( AC Power IN, DC Signal IN )

UP0 Y0 UP1 UP2 Y2 Y4 Y6 UP3 Y10 Y12
ZP0 ZP1 Y1 ZP2 Y3 Y5 Y7 ZP3 Y11 Y13

S/S X10 X11 X12 X13 X14 X15 X16 X17
X0 X1 X2 X3 X4 X5 X6 X7

DVP32ES00R2/T2

( AC Power IN, DC Signal IN )

Y0

11-2

Y1
C0 Y2

Y3

Y4 Y5
C1 Y6

Y10 Y11
Y14 Y15
Y7 C2 Y12 Y13 C3 Y16 Y17

DVP-PLC Application Manual

11 Appendix

S/S

DVP40ES00R2/T2

X0

X2 X4 X6 X10 X12 X14 X16 X20 X22 X24 X26
X1 X3 X5 X7 X11 X13 X15 X17 X21 X23 X25 X27

( AC Power IN, DC Signal IN )

C0 Y1 Y3 Y4 Y6 C2 Y11 Y13 Y14 Y16
Y0 Y2 C1 Y5 Y7 Y10 Y12 C3 Y15 Y17

S/S X22 X23 X24 X25 X26 X27 X30 X31 X32 X33 X34 X35 X36 X37 X40 X41 X42 X43
X0 X1 X2 X3 X4 X5 X6 X7 X10 X11 X12 X13 X14 X15 X16 X17 X20 X21

DVP60ES00R2/T2

( AC Power IN, DC Signal IN )

Y0 Y1 Y2 Y3 Y4 Y5
C0 C1 C2 C3 C4 Y6

Y10 Y11
Y14 Y15
Y20 Y21
Y24 Y25
Y7 C5 Y12 Y13 C6 Y16 Y17 C7 Y22 Y23 C8 Y26 Y27

„ For EH2/EH3 series MPU
S/S X0

DVP16EH00R2/T2

DVP16EH00R3/T3

Y0

DVP20EH00R3/T3

Y1 Y2 Y3 Y4 Y5 Y6 Y7
C0 C1 C2 C3 C4 C5 C6 C7

S/S X0

DVP20EH00R2/T2

DVP32EH00M2

DVP32EH00M3

DVP-PLC Application Manual

Y4 Y6
C4 Y5 Y7

S/S X0 X2 X4 X6 X10 X12 X14 X16
X1 X3 X5 X7 X11 X13 X15 X17

Y0

Y1 Y3
C0 Y2

Y4 Y5 Y7 Y10 Y11 Y13 Y14 Y15 Y17
C1 Y6
C2 Y12
C3 Y16

S/S X0 X2 X4 X6 X10 X12 X14 X16
X1 X3 X5 X7 X11 X13 X15 X17

DVP32EH00T2

DVP32EH00T3

X2 X4 X6 X10 X12
X1 X3 X5 X7 X11 X13

+24V Y0 Y1 Y2 Y3
24G C0 C1 C2 C3

DVP32EH00R2

DVP32EH00R3

X2 X4 X6
X1 X3 X5 X7

Y0

Y1 Y2 Y3 Y4 Y5 Y7
C0 C1 C2 C3 C4 Y6

Y10 Y11 Y13 Y14 Y16
C5 Y12 C6 Y15 Y17

S/S X0+ X1+ X2 X4+ X5+ X6 X10 X12 X14 X16
X0- X1- X3 X4- X5- X7 X11 X13 X15 X17

Y0- Y1Y2- Y3- Y4 Y5 Y7 Y10 Y11 Y13 Y14 Y15 Y17
Y0+ Y1+ SG0 Y2+ Y3+ C0 Y6
C1 Y12
C2 Y16

11-3

11 Appendix

S/S

DVP40EH00R2

DVP40EH00R3

X1

24G Y0 Y1 Y2 Y3
24V C0 C1 C2 C3

S/S

DVP40EH00T2

DVP40EH00T3

X1

24G Y0 Y1
24V C0

Y0

Y1 Y3
C0 Y2

DVP80EH

DVP80EH
00R3/T3

X4 X6 X10 X12 X14 X16 X20 X22 X24 X26
X5 X7 X11 X13 X15 X17 X21 X23 X25 X27

Y2 Y3
C1

Y0

Y1 Y3
C0 Y2

Y4 Y5
C2

Y6 Y7 Y10 Y12
Y14 Y16
C3 C4 Y11 Y13 C5 Y15 Y17

Y4 Y5 Y7 Y10 Y11 Y13 Y14 Y15 Y17 Y20 Y22 Y24 Y26
C1 Y6
C2 Y12
C3 Y16 C4 Y21 Y23 Y25 Y27

Y0

Y1 Y3
C0 Y2

Y4 Y5 Y7 Y10 Y11 Y13 Y14 Y15 Y17 Y20 Y21 Y23 Y25 Y27 Y30 Y32 Y34 Y36
C4 Y22 Y24 Y26 C5 Y31 Y33 Y35 Y37
C1 Y6
C2 Y12
C3 Y16

S/S X0 X2 X4 X6
X1 X3 X5 X7

00R2/T2

Y10 Y12
Y14 Y16
C5 Y11 Y13 C6 Y15 Y17

S/S X0 X2 X4 X6 X10 X12 X14 X16 X20 X22 X24 X26 X30 X32 X34 X36
X1 X3 X5 X7 X11 X13 X15 X17 X21 X23 X25 X27 X31 X33 X35 X37

DVP64EH00R2/T2

DVP64EH00R3/T3

Y4 Y6
C4 Y5 Y7

S/S X0 X2 X4 X6 X10 X12 X14 X16 X20 X22 X24 X26
X1 X3 X5 X7 X11 X13 X15 X17 X21 X23 X25 X27

DVP48EH00R2/T2

DVP48EH00R3/T3

X4 X6 X10 X12 X14 X16 X20 X22 X24 X26
X5 X7 X11 X13 X15 X17 X21 X23 X25 X27

X10 X12 X14 X16
X11 X13 X15 X17

X20 X22
X21 X23

Y4 Y5 Y7 Y10 Y11 Y13 Y14 Y15 Y17 Y20 Y21 Y23 Y24
C4 Y22
C5
C1 Y6
C2 Y12
C3 Y16

X24 X26
X25 X27

X30 X32 X34 X36
X31 X33 X35 X37

X40 X42 X44 X46
X41 X43 X45 X47

Y25 Y27 Y30 Y31 Y33 Y35 Y37 Y40 Y41 Y43 Y45 Y47
Y26
C6 Y32 Y34 Y36
C7 Y42 Y44 Y46

„ For SS/SA/SC/SX series MPU
DVP14SS

RUN

STOP

11-4

S/S
X0
X1
X2
X3
X4
X5
X6
X7
C0
Y0
C1
Y1
C2
Y2
Y3
Y4
Y5

DVP12SA

RUN

STOP

S/S
X0
X1
X2
X3
X4
X5
X6
X7
C0
Y0
C1
Y1
C2
Y2
Y3

DVP12SC-T

RUN

STOP

S/S
X0
X1
X2
X3
X4
X5
X10
X11
C0
Y0
C1
Y1
C2
Y10
C3
Y11

DVP10SX
V0+
I 0+
V1+
I 1+
V0+
D/A I 0+
V1+
I 1+
COM
A/D

RUN

STOP

S/S
X0
X1
X2
X3
C0
Y0
Y1

DVP-PLC Application Manual

11 Appendix
„ For SV/SV2 series MPU
DVP28SV11R

RUN

STOP

S/S
X0
X1
X2
X3
X4
X5
X6
X7
S/S
X10
X11
X12
X13
X14
X15
X16
X17

DVP-PLC Application Manual

DVP28SV11T

C0
Y0
Y1
Y2
C1
Y3
Y4
Y5
C2
Y6
Y7
Y10
C3
Y11
Y12
Y13

RUN

STOP

S/S
X0
X1
X2
X3
X4
X5
X6
X7
S/S
X10
X11
X12
X13
X14
X15
X16
X17

C0
Y0
Y1
C1
Y2
Y3
C2
Y4
Y5
C3
Y6
Y7
C4
Y10
Y11
Y12
Y13

11-5

11 Appendix
11.3

Appendix C: Terminal Layout for Digital I/O Modules
„ For ES/EX series digital I/O modules

DVP08XM11N

DVP08XN11R/T

( DC Power IN )

( DC Power IN )

24G S/S X10 X11
X0 X1

DVP08XP11R/T

DVP16XM11N

( DC Power IN )

( DC Power IN )

X2 X3 X4 X5 X6 X7
X12 X13 X14 X15 X16 X17

C0 C1 C2 C3
Y0 Y1 Y2 Y3

DVP16XN11R/T

( DC Power IN )

Y6 Y7
C6 C7

Y10 Y11 Y12 Y13
C10 C11 C12 C13

X0

DVP24XP11R/T

C4 C5
Y4 Y5

X1

Y14 Y15 Y16 Y17
C14 C15 C16 C17

X2 X3

X4

X5 X6

X7

( DC Power IN, DC Signal IN )

Y0 Y1
C0 C1

Y2

Y3
C2 C3

Y4

Y5
C4 C5

Y6 Y7
C6 C7

C0 C1 C2 C3 C4 C5 C6 C7
Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7

DVP24XN00R/T

( AC Power IN )

Y10 Y11 Y12 Y14 Y15 Y16 Y20 Y21 Y22 Y24 Y25 Y26
C10 C11 Y13 C12 C13 Y17 C14 C15 Y23 C16 C17 Y27

C0 C1 C2 C3 C4 C5 C6 C7
Y0 Y1 Y2 Y3 Y4 Y5 Y6 Y7

DVP24XN00R/T

( DC Power IN )

Y10 Y11 Y12 Y14 Y15 Y16 Y20 Y21 Y22 Y24 Y25 Y26
C10 C11 Y13 C12 C13 Y17 C14 C15 Y23 C16 C17 Y27

X10 X11 X12 X13 X14 X15 X16 X17
X0 X1 X2 X3 X4 X5 X6 X7

DVP32XP00R/T

( AC Power IN, DC Signal IN )

Y0 Y1
C0 Y2

Y4 Y5
Y3 C1 Y6

Y10 Y11
Y14 Y15
Y7 C2 Y12 Y13 C3 Y16 Y17

X10 X11 X12 X13 X14 X15 X16 X17
X0 X1 X2 X3 X4 X5 X6 X7

DVP32XP11R/T

( DC Power IN, DC Signal IN )

Y0 Y1
C0 Y2

11-6

Y4 Y5
Y3 C1 Y6

Y10 Y11
Y14 Y15
Y7 C2 Y12 Y13 C3 Y16 Y17

DVP-PLC Application Manual

11 Appendix

„ For EH2/EH3 series digital I/O modules

DVP08HM11N

X0 X2

DVP08HN11R/T

X4 X6

S/S X1 X3

X5 X7

X0 X2

Y0 Y1 Y3

S/S X1 X3

C0 Y2

DVP08HP11R/T

Y0 Y1 Y3

Y4 Y5 Y7

C0 Y2

C1 Y6

DVP16HM11N
S/S X0 X1 X2 X3 X4 X5 X6 X7
S/S X10 X11 X12 X13 X14 X15X16 X17

DVP16HP11R/T
S/S X4 X5 X6 X7

Y4 Y5 Y6 Y7

X0 X1 X2 X3

C0 Y0 Y1 Y2 Y3

C0

C1

Y1
Y2

Y4
Y3

C2
Y5

Y7 Y11 C3
Y6 Y10 Y12

X14
X15

DVP32HN00R/T
Y16
Y21 Y22 Y23 Y25
C4 Y20
C5 Y24

Y26 Y27 Y31 Y32 Y34 Y36
C6 Y30 C7 Y33 Y35 Y37

S/S X0 X2 X4 X6 X10 X12 X14 X16
X1 X3 X5 X7 X11 X13 X15 X17

DVP32HP00R/T
Y0

Y1 Y3
C0 Y2

Y4 Y5 Y7 Y10 Y11 Y13 Y14 Y15 Y17
C1 Y6
C2 Y12
C3 Y16

S/S X0 X2 X4 X6 X10 X12 X14 X16 X20 X22 X24 X26
X1 X3 X5 X7 X11 X13 X15 X17 X21 X23 X25 X27

DVP48HP00R/T
Y0

DVP-PLC Application Manual

Y1 Y3
C0 Y2

Y4 Y5 Y7 Y10 Y11 Y13 Y14 Y15 Y17 Y20 Y22 Y24 Y26
C1 Y6
C2 Y12
C3 Y16 C4 Y21 Y23 Y25 Y27

11-7

11 Appendix

„ For Slim (SS/SA/SC/SX/SV/SV2) series digital I/O modules
DVP08SM11N
S/S
X0
X1
X2
X3
X4
X5
X6
X7

DVP08SM10N
COM
X0
X1
X2
X3
X4
X5
X6
X7

DVP16SM11N
S/S
X0
X1
X2
X3
X4
X5
X6
X7

DVP08SN11R
DVP08SN11T
C0
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7

S/S
X10
X11
X12
X13
X14
X15
X16
X17

DVP08SP11R
DVP08SP11T
S/S
X0
X1
X2
X3

C0
Y0
C1
Y1
C2
Y2
C3
Y3

11-8

DVP16SP11R

DVP16SP11TS

DVP06SN11R

S/S
X0
X1
X2
X3
X4
X5
X6
X7

S/S
X0
X1
X2
X3
X4
X5
X6
X7

C0
Y0

C0
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7

UP
Y0
Y1
Y2
Y3
Y4
Y5
Y6
Y7
ZP

C3
Y3

C1
Y1
C2
Y2

C4
Y4
C5
Y5

DVP-PLC Application Manual

11 Appendix
11.4 Appendix D: Difference between EH2 and EH3
„ The capacity of the program is upgraded to 30k Steps, and the number of D devices is increased to 12000.
„ The capacity of the memory card has doubled. To prevent the wrong insertion, the new memory card and the old
one are not interchangeable

„ Some function cards of DVP-EH2 can not be used in DVP-EH3. The function cards which can be used are all
communication cards, 02AD card and 02DA card.

„ When the position of the basic instruction is below 16k Step, the execution speed does not make any change.
When its position is above 16k Step, the execution speed becomes 2.8μs.

„ The execution speed of MOV instruction is improved to 4.8μs, and that of other application instructions is also
improved by 4~5 times.

„ The high-speed input/output functions of DVP-EH3
A.

The number of external input interruptions is 16. (Please refer to section 2.1.)

B.

There are 3 sets of masking functions of the interruption. (Please refer to section 2.11.)

C.

Newly added CSFO instruction has the speed-tracing function and can be used with the manual pulse
generator. (Please refer to API 207.)

D.

Newly added DVSPO and DICF instructions have various speed-changing functions. (Please refer to API
198 and API 199.)

E.

The zero return instruction (DZRN) has the function of detecting limit switches, stopping at the positive
position, seeking Z phase, and outputting the displacement. (Please refer to API 156.)

F.

The direction outputs of DZRN instruction are used with Y1, Y3, Y5, and Y7. (Please refer to API 156.)

G.

That special M can set the start and reset functions of C235~C240 is cancelled. The bandwidth of
C235~C240can be up to 10 KHz.

„ Other newly added functions of DVP-EH3
A.

COM1 card and COM3 card can be masters. COM3 is an independent communication port which does not
occupy COM2. The flag of the transmitting function in the master is the same as that in DVP-ES2.

B.

The solar energy instructions DSPA and GPS instruction are added. (Please refer to API 177 and API
178)。

C.

We add the m servo convenience instruction ASDRW.(Please refer to API 206.)

D.

The program can be automatically backuped, and will not disappear even if the battery has run down.

E.

The second-backup function can store the second program and data.

F.

We add the basic instructions which are used exclusively for words. For example, BLD, BOUT, and etc.
(Please refer to API 266~274)

G.

The comparison instruction of the floating point number (FLD>=….).is added. (Please refer to API
275~292)

H.

M1356 can be used in PLC-LINK to designate the station numbers. Only when M1353 is on can
D1900~D1931 be used.

I.

ISPSoft and WPLSoft can set the read-only function of the communication and function of downloading the
program.

J.

It can connect with at most 12 right-side analog extension modules.

DVP-PLC Application Manual

11-9

11 Appendix
11.5 Appendix E: Revision History
Item

#1

Revisions

Chapter

Š Information related to EH3 and SV2 is added.

All

Š 1.3 How to Edit Ladder Diagram: The ladder diagram and explanations on ANI
#2

instruction

Chapter 1

Š 1.7 Basic Program Designing Examples: Explanations on Start, Stop and Latched
Š Special auxiliary relays: M1025, M1036, M1058, M1075, M1085, M1087,
M1102~M1103, M1133~M1137, M1154~M1160, M1163~M1164, M1181~M1182,
M1189~M1191, M1194~M1195, M1304, M1308~M1311, M1347~M1348, M1355,
M1520~M1525, M1534~M1541
#3

Chapter 2

Š Special data registers: D1002, D1026~D1027, D1063~D1064, D1109,
D1131~D1133, D1147, D1172, D1180~D1181, D1198~D1199, D1320~D1327,
D1232~D1239, D1341~D1342, D1352~D1353, D1383~D1384, D1386~D1393,
D1478~D1479, D1995~D1999
Š Communication addresses for DVP series PLC

#4
#5
#6
#7

Š 5.1 List of Instructions

Chapter 5

Š 5.5 Instruction Index
Š Modified instructions: CJ, FMOV, INC, DEC, WSFL, SFRD, ANR, FLT

Chapter 6

Š Modified instructions: REF, HSCS, HSCR, SPD, PLSY, PLSR, ABSD, RAMP,
SORT, DSW, ARWS, ASC, PR, FROM, TO, PID
Š Modified instructions: MODRD, MODWR, CRC, EXP, CVM, MEMW

Chapter 7
Chapter 8

Š New instruction: MMOV
#8

Š Modified instructions: MODRW, ABSR, ZRN, DRVI, DRVA, HOUR, MCMP, MBWR,

Chapter 9

PPMR, PPMA, CIMR, CIMA, PTPO, CLLM
#8

11-10

Š New appendices: Table for self-detecting abnormality, terminal layouts for MPU
and digital I/O modules, difference between EH2 and EH3, revision history

Chapter 11

DVP-PLC Application Manual



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2012:04:16 09:01:43+08:00
Create Date                     : 2012:04:13 17:24:06+08:00
Metadata Date                   : 2012:04:16 09:01:43+08:00
Creator Tool                    : CorelDRAW 版本 12.0
Format                          : application/pdf
Title                           : PLC-Application-Manua(curve)l.cdr
Creator                         : Delta
Document ID                     : uuid:75ab4b2f-a736-427c-812b-be3bd26ea833
Instance ID                     : uuid:795f33eb-c62a-4ff2-9fc2-0981f34ecec0
Producer                        : Corel PDF Engine Version 1.0.0.536
Page Count                      : 695
Author                          : Delta
EXIF Metadata provided by EXIF.tools

Navigation menu