Microsoft GTC Dosx Dos Setup Instructions

User Manual:

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

Setting up my computer for the Dos board
1. Download and install the Arduino IDE on your computer
a) https://www.arduino.cc/en/Main/Software

2. Install Silicon Labs Virtual Com driver
a) https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers

3. Configure IDE to use ESP32 processor
a) Files  Preferences  Additional Board Managers, https://dl.espressif.com/dl/package_esp32_index.json

4. Plug board into a USB port
a) In Device Manager, check which COM port it was assigned (like COM1)

5. Set COM port and speed (115200)
a) Tools  Ports  Upload speed

6. Set Board to ESP32
1. Tools  Board  Boards Manager
2. Type ESP32 in search bar and install v1.0.0 package



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Author                          : JKleiman
Create Date                     : 2019:06:06 08:53:29-05:00
Modify Date                     : 2019:06:06 09:11:58-05:00
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Format                          : application/pdf
Creator                         : JKleiman
Title                           : Microsoft PowerPoint - GTC Dos.pptx
Metadata Date                   : 2019:06:06 09:11:58-05:00
Producer                        : Microsoft: Print To PDF
Document ID                     : uuid:2c5ec961-61a0-4433-81f4-ec0ad068b6dd
Instance ID                     : uuid:3ae7a035-898c-4f28-9188-2a9d71145bc9
Page Count                      : 1

EXIF Metadata provided by EXIF.tools